Ethernet controller. To ensure proper operation, some methods
needed to be updated in the SMSC9220's native driver as well.
It passes all related Greentea tests, however when supervised by
the Python environment it tends to fail because of Timeout.
The current timeout is set to 1200s that seems to be a little bit short
to finish all test cases, the timeout happens towards the end of the
last test case.
Change-Id: I914608c34828b493a80e133cd132537a297bfc84
Signed-off-by: Bence Kaposzta <bence.kaposzta@arm.com>
Private constructor called in TCPSocket accept, when creating a new Socket.
Close() method calls moved "up" to InternetSocket.
InternetSocket::close() returns proper error code when no socket available.
Add TcpSocket::accept icetea tests.
Deleting sockets moved to teardown.
If Mbed TLS support for X509 is not compiled in, this class would
not compile anymore. However, there might be other uses for it, even
if certificates are not used. Therefore add flagging for X509 only
on specific functions.
Provide TLSSocket implementation. This implementation allows TLSSocket
to wrap around any existing socket. Currently only TLS supported. DTLS
not yet implemented.
Design document also provided with the implementation.
Documentation submitted to Mbed OS handbook.
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
New classes covered with unit tests: SocketAddress, EthernetInterface, EMACInterface, WiFiAccessPoint.
Also added missing namespace in front of mbed::Callback usages.
EMACInterface is covered by the EthernetInterface unit tests.
When socket created using accept() is closed by calling the close()
method, "delete this" is executed which triggers the destructor call
on TCPSocket which in turn calls close() once again. Because _stack
is already 0 this results in a hard-fault.
Add a check that skips the rest of the close() method is the _stack
is already 0.
TB_SENSE_12 would have been left behind by the changes in #7778. This commit implements the changes in mbed to allow targets to provide a default network interface for Silicon Labs targets.
[Warning] InternetSocket.h@237,10: 'InternetSocket::_factory_allocated' will be initialized after [-Wreorder]
[Warning] InternetSocket.h@236,23: 'volatile unsigned int InternetSocket::_pending' [-Wreorder]
[Warning] InternetSocket.cpp@22,1: when initialized here [-Wreorder]
Typo in the config file made the LwIP stack way too small on EFM32GG11 STK3701 target. Additionally, the EMAC thread stack was slightly too small when debug printing is on.
Setting ""nsapi.dns-cache-size": 0" still left some of the DNS
caching code in. Add crude #if to remove all of it.
This allows one to save 429 bytes of flash and 48 bytes of RAM on
ARMC5 builds.
* Move IP Socket stuff to InternetSocket class which is inherited by TCP/UDP
* Implement sendto() and recvfrom() on TCP socket
* Implement connect() call on UDP
* Implement send() and recv() calls on UDP socket
Code was written using MBED_CONF_DEFAULT_* but the mbed_lib.json file
that created these values is prefixed with "nsapi" and therefore
final macros are MBED_CONF_NSAPI_DEFAULT_*
Currently, if all TX descriptors are in use and IP stack calls K64F/K66F
ethernet driver link out, link out drops the packet. Added 10ms delay
to link out to wait for a descriptor to become available before dropping
the packet.
Changed K64F/K66F power up to return without waiting for link up i.e. for
the ethernet cable to be connected. This is needed for non-blocking use
of driver e.g. for using the driver from event queue.
Two cascading copy-paste errors stopped this working:
* PPPCellularInterface::get_gateway() called
nsapi_ppp_get_ip_address();
* nsapi_ppp_get_gateway() called the interface's get_netmask().
First bug has always been there - second one was introduced in 5.9.
AT_CellularNetwork currently lacks calls to get both netmask and gateway
- this patch would be needed for that when added.
When all TX descriptors were reserved in a row so that TX buffer
reclaim interrupt did not happen during reservation sequence, after
the interrupt occurred, TX buffer reclaim did no longer free buffers.
This happened because when all descriptors were in use, last free
index pointed to consumed index.
TX pointer array was using RX ring length in its declaration.
Wasted memory if RX ring > TX ring, as is the default, but would
be broken if RX ring < TX ring.
16 RX buffers and 8 TX buffers is probably excessive. Nanostack
version of driver successfully used 4+4, and data pump should be
broadly equivalent.
This means that switching K64F devices from Nanostack to EMAC increases
base heap usage by 18K - observed in Nanostack border router builds.
Add a config option to make it possible to lower the number of buffers.
Defer consideration of lowering the default to later.
DNS resolver now counts how many sendto operations are successful
during one DNS server attempt cycle (attempting to contact DNS
servers from 0 to last index, including stack specific ones). If all
socket sendto operations fail, DNS resolution is aborted.
If one or more are successful, DNS resolution is continued until
total network attempts count is reached or all sendto operations
fails during a cycle.
Terence Zhang
Amanda Butler
kegilbert
Bence Kaposzta
Cruz Monrreal
Mel W
Michal Paszta
paul-szczepanek-arm
Paul Szczepanek
Martin Kojtal
Conrad Braam
Taiki
Seppo Takalo
Deepika
Kevin Bracey
Sławek Piotrowski
jeromecoutant
Steven
Kimmo Vaisanen
Juha Ylinen
Ammad Rehmat
cyliangtw
Steven Cooreman
Tero Jääskö
Mika Leppänen