Remove lwIP reliant networking and BLE tests for baremetal
Mbed OS 5 ported lwIP in its OS mode and uses threads. Networking
that rely on lwIP needs to be removed so it can be compiled with the
baremetal profile.
The BLE cordio Greentea tests are also disabled given that the feature
is not supported without an RTOS.
Corrected PPP thread stack size for RZ_A1_EMAC, CYW943012P6EVB_01,
CY8CPROTO_062_4343W, CY8CKIT_062_WIFI_BT and CY8CKIT_062S2_43012
that have special configuration for PPP thread size. Removed
pppInterface() helper call from network interface. It causes binary
compatibility break with precompiled network interface classes. Call
is helper function to check network interface type in case it is
unknown, and is not mandatory or used with PPP.
Created (a new) PPP interface for PPP service. Removed lwip
dependencies to PPP (memory allocations etc.). Moved PPP
configuration options away from lwIP mbed_lib.json to new
PPP service. For backwards compatibility, using the old
options is also currently supported.
If TCP FSM is in ESTABLISHED state, waits for TCP close handshaking until TIME_WAIT
The purpose is to prevent eth/wifi driver stop and FIN ACK corrupt.
This may happend if network interface disconnect follows immediately after socket_close.
Added Multihoming feature to LWIP (ability to use more than one network interfaces) for increasing networking reliability.
This involves:
LWIP interface
LWIP IP routing
DNS storage
Sockets (bind to interface name possibility)
possibility to add non default network interface
cellular middleware modifications if cellular connection is used
Currently, LwIP segment retransmission time is 12, which is very long
time as each timeout doubles the retransmission timeout.
Make that to 6 as that is same what we use in Nanostack.
This PR addresses the issue of #8124.
It updates and enriches the wifi connection error type to adapt the Network Socket test plan requirement.
In the meantime, it increases the heap size that allows the transmission of larger packet size.
Description
1. Increase heap size in lwipstack\mbed_lib.json to fulfill bursty TCP and UDP transmission requirement.
2. Modify and enrich wifi connection error types in TARGET_AMEBA\RTWInterface.cpp to adapt the decision logic of the wifi test cases.
3. Add new static constants in TARGET_AMEBA\RTWInterface.h, including 'SSID_MAX_LENGTH', 'PASSPHRASE_MAX_LENGTH' and 'PASSPHRASE_MIN_LENGTH' to help verifying the validity of ssid and passphrase.
Pull request type
[x] Fix
[ ] Refactor
[ ] Target update
[ ] Functionality change
[ ] Docs update
[ ] Test update
[ ] Breaking change
Typo in the config file made the LwIP stack way too small on EFM32GG11 STK3701 target. Additionally, the EMAC thread stack was slightly too small when debug printing is on.
For speeding up of LWIP in RZ/A1, I added four new config processes in mbed_lib.json and lwipopts.h, overriden those values.
Since RZ/A1 incorporates a large memory, can actualize speeding up by running with the override value.
Also those new config processes will be helpful for more customize.
I changed stack size because the deafult stack size may not be enough for
Ethernet of GR-PEACH(Cortex-A).
- Stack size is default size + 128 byte
In order to maximize the performance of Ethernet, I changed heap size to
below.
- Heap size is default size * 32 byte(send descriptor num is 16 and recv
descriptoer num is 16).
Marcelo Salazar
Kimmo Vaisanen
Michal Paszta
Hugues Kamba
Balaji
Martin Kojtal
Antti Kauppila
midd
Mika Leppänen
Seppo Takalo
Kyle Kearney
Balaji
Volodymyr Medvid
Tymoteusz Bloch
Lin Gao
Tymoteusz Bloch
Marcin Tomczyk
Lu
Qinghao Shi
Mahesh Mahadevan
Cruz Monrreal
Ammad Rehmat
Steven
TomoYamanaka
Steven Cooreman