In AU/CN/US PHY, RX1 slot frequency is calculated in rx_config().
Since the caller is printing it to log, modify the frequency in
parameter structure so that the correct value will be printed.
In a specific branch path 'adr_settings' in link_adr_request() API, the
structure adr_settings of type link_adr_params_t will be rendered
uninitialized. To prevent this we initialize the construct as zero.
In addition to that, to handle the case properly we should check for the
command identifier and the command payload length anticipating contiguous
blocks of adr commands. If we find a discrepency in size, we should
abort.
LinkADRReq mac command can be used by the network server to set a
certain level of QOS using NbTrans field which is applicable to
Unconfirmed traffic only for 1.0.2 spec.
This commit introduces mechanisms to facilitate this QOS. It means to
repeat an outgoing unconfirmed message NbTrans times without changing
its frame counter.
For class C, we have retired the ack_expiry_timer_for_class_c and have
replaced it with another timer which mimics the RX2 closure as in Class
A but doesn't actually close RX2 window. It's just a mechanism by which
the state machine is informed that the you can proceed forward, we have
not received anything in RX2 window either. This is needed as RX2
doesn't timeout in class C (i.e., the radio remains in continuous mode).
In addition to that we need to close any pending timers for Receive
windows after the MIC has passed and the Duplicate counter check has
also been passed.
LinkADRReq mac command can be used by the network server to set a
certain level of QOS using NbTrans field which is applicable to
Unconfirmed traffic only for 1.0.2 spec.
This commit introduces mechanisms to facilitate this QOS. It means to
repeat an outgoing unconfirmed message NbTrans times without changing
its frame counter.
For class C, we have retired the ack_expiry_timer_for_class_c and have
replaced it with another timer which mimics the RX2 closure as in Class
A but doesn't actually close RX2 window. It's just a mechanism by which
the state machine is informed that the you can proceed forward, we have
not received anything in RX2 window either. This is needed as RX2
doesn't timeout in class C (i.e., the radio remains in continuous mode).
In addition to that we need to close any pending timers for Receive
windows after the MIC has passed and the Duplicate counter check has
also been passed.
set_next_channel() is the base function provided by LoRaPHY class and should be overridden
by the PHYs who behave differently as compared to EU868 like PHY layers.
CN470 PHY had been missing such an override.
In addition to that we have provided a parameter "fsb-mask-china" that can be used to
enforce a custom frequency sub-band of operation as most of the base stations in the market
may not support all 96 channels. Such a strategy will help in rapid network acquisition.
Instead of giving LoRaWANTimeHandler object as parameter for constructor,
object is now given via own initialize() method.
This change is needed for future refactoring where application can give own
PHY object for LoRa stack.
While configuring RX parameters for the radio, we need to feed in
rx windows 1 and 2 parameters which are computed when we do the transmission.
We are actually setting the physical value of the data rate rather than
data rate table index and the expectation was to set the data rate index.
LoRaMacChannelPlan class provides APIs which are not usable for
PHY layer implementations who do not support custom channel plans.
So we had some code in APIs which was explicitely using magic numbers
for the channel mask. Although it turned out to be not a bug as a layer
down we were checking for custom channel support. However, we now
check for custom channel support before going deep into PHY layer that will
make the code run faster and we have done some cosmetics to the code for
readability.
Channel mask is manipulated with inline methods
The PHY layer had a lot of duplicated code in various geographic regions.
In this commit we have tried to concentrate all common functionaliy into
one single class which LoRaPHY that provides three kind of methods:
i) Non virtual base methods which are there for upper layer use, e.g.,
providing access to driver or generic PHY layer functionality which
needs to be exposed to upper layers.
ii) Virtual methods (no hard limit on implementation) that can be overriden
in derived classes. Some PHY implementations will need that as they may
come with very peculiar channel schemes, e.g., dynamic channel schemes
in US bands.
iii) Protected methods which are only available for the derived PHYs
We have adopted a mechanism for the dervied PHYs to announce their differenmtiating
parameters in their constructors by filling up a data structure known as lora_phy_params_t
which exists at base level. Access modifier for this data structure is protected so it can only be
used by the base or derived classes, i.e., no exposure to upper layers.
For extra functionality and differentiating controls, a derived PHY can override any virual method as necessary.
In addition to that we have adopted the Mbed-OS style guide and have changed data structures and code to reflect that.
Some data structures are removed.
* Algorithm to get alternate DR is modified. Current scheme, works as multiples of 6 as EU and EU like PHYs
provide 6 datarates. We make sure that we try a datarate at least once. If nuber of join retries is a multiple
of 6, we may try multiple times on each data rate.
* Most of the PHYs with dynamic channel plans, always override the above mentioned algorithm as the rules governing
this algorithm do not hild in their case.
* band_t data structure is enhanced with lower band frequency and higher band frequency. That enables us to validate
frequency based upon the band and hence we can have a single function for all PHYs to validate frequency.
* In some PHYs, there were some extra channel masks were defined which were not being used. Hence removed.
* EIRP table corrected in some PHYs based upon spec.
* PHY functions in response to Mac commands are renamed to reflect what they exactly do.
for example accept_rx_param_setup_req() because that's what they do. they can either accept
the mac command or reject it.# Please enter the commit message for your changes.
Baseline is changed to use a single set of data structures that simplifies the
code in the LoRaWANStack and Mac layer. We are now following certian rules for naming
data structures.
- All structures visible outside their domain are prefixed as 'lorawan_'
- All mac structures are prefixed as 'loramac_'
- All subsystem or module strucutures carry their name in prefix, like 'mcps_'
PHY layer still have legacy camel case data structures which will be entertained
later while we will be simplifying PHY layer.
Test cases are also updated with the new data structure naming conventions.
One major difference from the previous baseline is the removal of static buffer
from mcps indication. And we do not copy data from stack buffer to rx_msg buffer.
This saves at least 512 bytes.
It may look like now that if we have received something but the user have not read
from the buffer, then the buffer will be overwritten and we will lose previous frame.
Yes, we will. But the same will happen even if we would have copied the buffer into rx_msg
because then the rx_msg gets overwritten. So we decide to abandon copying the buffer at
multiple locations. We inform the user about reception, if the user doesn't read and
the data gets overwritten, then so be it.
LoRaWANTimer is now called as LoRaWANTimeHandler class as this class handles both
current time and timer functionalities.
Some refactoring on how LoRa objects are created was needed:
- LoRaWANTimeHandler object is created by LoRaWANStack and shares with LoRaMac and PHY.
- LoRaPHY object is now member of LoRaWANStack class instead of static variable in source file.
MAC layer is now a class rather than being a blob.
In addition to that Mac commands are now being handled in
a seperate subsystem (a class of its own). In future we
will do the same with othe sublayers of MAC like MLME, MCPS etc.
The drive behind this exercise is to make MAC and supporting layers
into an object oriented system.
Major bug fixes include:
- last join time inclusion in band parameters
- disabling rx2 window if we missed the slot already
- MLME uplink schdule hook
- nbRep according to spec
- maintaining datarate after successful joining
- suppressing MLME requests if MAC is in TX_DELAYED state
- Uplink dwell time verification
Some missing features are implemented. Details are as follows.
Support for LinkCheckRequet:
An application API is added, add_link_check_request() to delegate a
request for Link Check Request MAC command.
* Application provides a callback function that needs to be called on reception of
link check response.
* Mac command is piggybacked with data frames.
This API makes the sticky MAC command stick with the application payloads until/unless
the application un-sticks the said mac command using remove_link_check_request() API.
Handling fPending bit:
If in the Downlink, we get the fPending bit set in fctrl octet,
we attempt to send an empty message back to Network Server to
open additional Receive windows. This operation is independent
of the application. An RX_DONE event is queued bedore generating
the said empty message. Specification does not mention what can be the
type of that empty message. We have decided it to be of CONFIRMED
type as it gives us an added benefit of retries if the corresponding
RX slots are missed.
Radio event callbacks as Mbed callbacks:
radio_events_t structure has been carrying C-style callbacks which was
inherited from the legacy code. These callbacks has now been changed to
Mbed Callbacks that makes sure that we can be object oriented from now
on.
LoRaPHY is the abstract class for the LoRa PHY layer which governs
the LoRaRadio and provides some common functionality to all regional
implementations.
We support 10 regions and every region comes loaded with default parameters.
These parameters can be changed by the Mac layer or explicitely by the stack
controller layer using APIs provided. This layer in essence detaches Mac completely
from PHY and provides more modular approach to the entire system.
Apart from class structure, the internal functionality is directly deduced from
semtech reference implementation that's why most of the internal data structures are
used on 'as is' basis.
In addition to that, the PHY layer provides APIs to control the LoRaRadio layer, i.e.,
the lora radio driver, ensuring that the radio is accessed from a single entry point.
A seperate data structure file is added which is common to PHY layers only.
Teijo Kinnunen
Hasnain Virk
Martin Kojtal
Cruz Monrreal II
Kimmo Vaisanen