Re-casting with tmp the uint8_t* pData pointer to uint16_t* brings a
memory corruption and typically can corrupt the size parameter. This
is fixed with this commit.
STM32 Internal ticket reference : 39116
The computation of the sector number in GetSector for 2MB flash sizes
consists in adding an extra constant for 2MB dual bank (12 as in
ADDR_FLASH_SECTOR_12), then going through the same address check as if it
was an address of the first sector.
That means that we need to modify tmp and address as if it was a first bank
address, which we're doing here by sub_stracting 0x100000 delta.
Rather than Unlocking flash during flash object creation, and leaving
the flash possibly continuously unlocked a(s object might bever be freed),
we decide to Unlock then Lock again at each erase or program call.
After reset the MCR register content needs to be restored so we're
introducing the can_registers_init function to be called at the first
init stage, but also after reset. We also store the can frequency to
go through the initialisation phase again.
Instead of a static object, this will make driver
instantiation more robust and allow to re-use init
configuration on a need basis.
The CANName struct member is actually the CAN registers base address,
which is now available in the CanHandle.Instance field, so we don't need
CANName anymore.
Users of FlashIAP usually get the minimum programable size
by calling flash.get_page_size(), so let's return the minimum
to allows a most efficient usage of flash.
For F4 devices, this is 1 byte.
For L0 and L1 devices, this is a word (4 bytes).
For L4 devices, this is a double word (8 bytes).
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
This is a 1,5MB flash memory device which contains 15 sectors, where
sectors 12 to 15 are 128KB sectors. So flash_api.c needed has been
updated to differentiate between this flash memory and the 2MB ones
by checking existence of sector 16 instead of sector 12.
UBLOX_ODIN_EVK_W2 is missing the abstract button definitions originally
introduced with PR https://github.com/ARMmbed/mbed-os/pull/4249.
Fix two tab to spaces issues on the go as well.
On F410RB, the size reserved to vectors with ARM toolchains was not properly
defined,which was not the case for other toolchains.
This would cause few tests to fail like EXAMPLE_1 with below error:
HOST: Unknown property: mbed assertation failed: _ptr == (T *)&_data, file: C:/github/mbed/BUILD/mbed/platform/SingletonPtr.h, line 91
Use ADDR_FLASH_SECTOR_12 as this is defined by target (the flash size varies, for
instance for some F437xx is up to 2MB (2nd bank might not be there)).
misodengaku
bcostm
Laurent MEUNIER
Andrea Corrado
jeromecoutant
andreas.larsson
Pavel Sorejs
Kevin Gilbert
Martin Kojtal
Jimmy Brisson
Jan Jongboom
Wolfgang Betz
Janne Kiiskilä
adustm