mbed-os

Commit Graph

Author	SHA1	Message	Date
Laurent MEUNIER	d4fa585ac4	STM32: F1 GPIO: Enable AFIO clock It is required to enable AFIO clock before using __HAL_AFIO_REMAP_xy macros, which was missing here. Without clocks enable, the remap actually doesn't occur. This would possibly cause some PIOs (part of PB_3, PB_4, PA_13, PA_14, PA_15) to not behave as expected. In most cases AFIO clock was enabled in stm_pin_SetAFPin function, so that this bug was not visible. But there were few cases left were stm_pin_DisconnectDebug would be called first. A typical case was with GCC_ARM in case a DigitalInOut variable is declared as global.	2017-08-21 13:32:33 +02:00
Laurent MEUNIER	273ac81680	stm32: use default in switch case As commented during PR review, better use default case.	2017-02-16 19:34:01 +01:00
Laurent MEUNIER	21bc5af3c2	STM32: common pinmap using LL layer to access registers this first makes pinmap.c a common file then rework it with several goals: - avoid gpio / irq / pin management extra dependencies - improve performances when switching between pin modes This change is based on LL layer to access to registers level instead of using HAL higher level API. The family specific functions are implemented in pin_device.h of each family. Mostly this is F1 family that is differnt from other ones.	2017-02-16 18:57:18 +01:00

Author

SHA1

Message

Date

Laurent MEUNIER

d4fa585ac4

STM32: F1 GPIO: Enable AFIO clock

It is required to enable AFIO clock before using __HAL_AFIO_REMAP_xy
macros, which was missing here. Without clocks enable, the remap
actually doesn't occur. This would possibly cause some PIOs (part of
PB_3, PB_4, PA_13, PA_14, PA_15) to not behave as expected.

In most cases AFIO clock was enabled in stm_pin_SetAFPin function, so
that this bug was not visible. But there were few cases left were
stm_pin_DisconnectDebug would be called first. A typical case was
with GCC_ARM in case a DigitalInOut variable is declared as global.

2017-08-21 13:32:33 +02:00

Laurent MEUNIER

273ac81680

stm32: use default in switch case

As commented during PR review, better use default case.

2017-02-16 19:34:01 +01:00

Laurent MEUNIER

21bc5af3c2

STM32: common pinmap using LL layer to access registers

this first makes pinmap.c a common file

then rework it with several goals:
- avoid gpio / irq / pin management extra dependencies
- improve performances when switching between pin modes

This change is based on LL layer to access to registers level
instead of using HAL higher level API.

The family specific functions are implemented in pin_device.h
of each family. Mostly this is F1 family that is differnt
from other ones.

2017-02-16 18:57:18 +01:00

3 Commits (mbed-os-5.6)