mbed-os

Author	SHA1	Message	Date
danclement	889e22cce9	Checking in the fixes related to I2C issues. Three main issues: 1) The 0x13 special case section in write data in ncs36510_i2c.c didn't have a write++ command. 2) In the same write function, the WDAT8 command was put before the 0x13 section and this is not correct 3) Needed to add wait_us(0) before and after the register writes for apparent clock domain crossing delay times until registers are stable in HW There were also a handful of other tweaks related to general code maintenance and moving some status register checks to the proper locations.	2017-11-17 14:55:45 +00:00
pradeep-gr	c71bfdbc44	NCS36510: I2C idle delay of 1us It is added between I2C commands as I2C_COMMAND_FIFO is too fast to push commands out.	2017-02-21 09:16:21 +00:00
Laurent MEUNIER	22c50d32d2	cmsis to device changes	2016-10-12 14:54:43 +05:30
Christopher Haster	0bad622a16	restructure - Moved targets out to top level hal/targets -> targets hal/targets.json -> targets/targets.json	2016-09-30 19:18:09 -05:00