Make equeue_create_inplace align the passed-in buffer and size to
sizeof(void *).
Really we should be aiming to align more for ARM, as blocks should be
8-byte aligned, but the internal heap mechanisms only work to 4-byte
alignment at the moment. More work would be needed to ensure 8-byte
alignment of allocated blocks.
1. Override IlinkOverrideProgramEntryLabel and IlinkProgramEntryLabel to specify
entry point for debuger.
2. Refer to doc at the link below for post-export steps. Usually, 'export' is nearly
out of the box and just install 'Nu-Link Driver (IAR)' to update Nuvoton device
database in IAR.
https://github.com/OpenNuvoton/NuMaker-mbed-docs/blob/master/IAR/DEBUG_IAR.md
Needed for PSoC to deep-sleep for more than 2 seconds
Max sleep with 16 bit lp_ticker (before this change) : 2sec
Max sleep with 32 bit lp_ticker (after this change) : 36hours
Original AT traces had several issue:
- Can be overwritten by other traces (printf/mbed-trace)
- No way to know which direction message was going (TX or RX)
- <cr> and <ln> characters were not visible in trace
etc.
This commit addresses those issues using mbed-trace and showing separately
each filehandle write and read.
The cache must be refreshed when we erase or program flash memory.
It fix 2 issues :
Fix#9934Fix#6380
This solution was initially proposed in #6380.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
We provide now downlink channel frequency and time on air for the
received frame in the RX metadata.
Previously the channel information in both TX and RX metada contained
the index number of the channel. That information wasn't very useful
except the index numbers of default channels. To make more sense of the
meta data, we now store the channel frequency in the channel parameter
rather than the index number of the channel.
RX time on air is collected from the radio driver and it is assumed that
the downlink frame had 8 downlink preamble symbols (plus 4.25 of the
preambles added by the chip) for LoRa modulation.
This commit also include a bit of tidying of RX frequency storage in rx
configuration parameters storage. Previously we were missing filling in
the RX1 frequency correctly.
bcostm
Laurent Meunier
jeromecoutant
Ganesh Ramachandran
Andrii Lishchynskyi
Kevin Bracey
junichi.katsu@uhuru.jp
ccli8
Brian Daniels
paul-szczepanek-arm
Teemu Kultala
Vivek Pallantla
Kimmo Vaisanen
Lei Zhang
Jan Jongboom
mudassar-ublox
Mahesh Mahadevan
Jimmy Brisson
Vincent Veron
David Saada
Cruz Monrreal II
Offir Kochalsky
Marc Emmers
Filip Jagodzinski
Michal Paszta
studavekar
Desmond Chen
Nick
Cruz Monrreal
Qinghao Shi
ecoromka
Hasnain Virk