11 Commits (feature-nrf52-low-power-ble)

Author	SHA1	Message	Date
jeromecoutant	f0b7e8b98c	STM32H7: update target specific files with Cube-1.8 ... - startup files pdated from Cube - all SetSysClock aligned and checked - license header updated	2020-10-20 08:19:16 +02:00
jeromecoutant	2368a07244	STM32: Fix the UART RX & TX data reg bitmasks	2020-02-07 16:23:50 +00:00
Laurent Meunier	f20529f9e6	STM32: Update and align serial_clear implementations ... Clear RXNE flag by reading the RX register and align this implementation on all families.	2019-11-25 14:55:32 +01:00
Laurent Meunier	e862438fad	Clearing UART TC Flag prevents deep sleep, so do not clear it ... The TC flag is used in function serial_is_tx_ongoing to check if there is an ongoing serial transmission. So this Flag must not be cleared at the end of the transmission, otherwise, serial_is_tx_ongoing will notify that TX is ongoing. The impact is that it may prevent deep sleep to be entered. Also there is no need to clear this flag at the end of the transaction because it will be cleared automatically by HW when a new transmission starts.	2019-10-15 15:59:51 +02:00
Yuan Cao	6ed21ee1c0	Fixed serial_device IRQ infinite loop bug due to uint8_t overflowing	2019-07-13 00:05:25 -04:00
Martin Kojtal	b0073bb70d	Merge pull request #10774 from fkjagodzinski/fix-uart_irq ... Fix serial IRQ handling	2019-06-25 15:49:41 +01:00
jeromecoutant	a90e68e788	STM32H7 UART: enable LPUART	2019-06-07 18:05:06 +02:00
Filip Jagodzinski	fa0cc68657	STM32H7: Fix serial IRQ handling ... Check that the RX or TX interrupt is enabled before calling a registered handler with RxIrq or TxIrq arg.	2019-06-07 15:30:03 +02:00
jeromecoutant	eec7126d37	STM32 Serial Flow Control ... Crash occured when RTS=CTS=NC Now we chek if used pins are the same UART as TX and RX	2019-01-31 17:11:23 +01:00
jeromecoutant	b1a284a876	STM32: astyle check	2019-01-10 10:22:21 +01:00
jeromecoutant	4b67820f8a	NUCLEO_H743ZI: add initial SDK	2019-01-04 10:03:36 +01:00