ADD NEW TARGET : NUCLEO_F756ZG, based on existing NUCLEO_F746ZG

targets/TARGET_STM/TARGET_STM32F7/TARGET_F746_F756/TARGET_NUCLEO_F756ZG/device/stm32f7xx.h

@@ -0,0 +1,216 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    22-April-2016
+  * @brief   CMSIS STM32F7xx Device Peripheral Access Layer Header File.           
+  *            
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F7xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx
+  * @{
+  */
+    
+#ifndef __STM32F7xx_H
+#define __STM32F7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32F7)
+#define STM32F7
+#endif /* STM32F7 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F767xx) && \
+    !defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx)
+  #define STM32F756xx         /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
+                                   STM32F756NG Devices */
+  /* #define STM32F746xx */   /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG,
+                                   STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */
+  /* #define STM32F745xx */   /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */
+  /* #define STM32F765xx */   /*!< STM32F765BI, STM32F765BG, STM32F765NI, STM32F765NG, STM32F765II, STM32F765IG,
+                                   STM32F765ZI, STM32F765ZG, STM32F765VI, STM32F765VG Devices */
+  /* #define STM32F767xx */   /*!< STM32F767BG, STM32F767BI, STM32F767IG, STM32F767II, STM32F767NG, STM32F767NI,
+                                   STM32F767VG, STM32F767VI, STM32F767ZG, STM32F767ZI, STM32F768AI Devices */
+  /* #define STM32F769xx */   /*!< STM32F769AG, STM32F769AI, STM32F769BG, STM32F769BI, STM32F769IG, STM32F769II,
+                                   STM32F769NG, STM32F769NI Devices */
+  /* #define STM32F777xx */   /*!< STM32F777VI, STM32F777ZI, STM32F777II, STM32F777BI, STM32F777NI, STM32F778AI Devices */
+  /* #define STM32F779xx */   /*!< STM32F779II, STM32F779BI, STM32F779NI, STM32F779AI Devices */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.1.0
+  */
+#define __STM32F7_CMSIS_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F7_CMSIS_VERSION_SUB1   (0x01) /*!< [23:16] sub1 version */
+#define __STM32F7_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32F7_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F7_CMSIS_VERSION        ((__STM32F7_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32F7_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32F7_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32F7_CMSIS_VERSION))
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(STM32F756xx)
+  #include "stm32f756xx.h"
+#elif defined(STM32F746xx)
+  #include "stm32f746xx.h"
+#elif defined(STM32F745xx)
+  #include "stm32f745xx.h"
+#elif defined(STM32F765xx)
+  #include "stm32f765xx.h"
+#elif defined(STM32F767xx)
+  #include "stm32f767xx.h"
+#elif defined(STM32F769xx)
+  #include "stm32f769xx.h"
+#elif defined(STM32F777xx)
+  #include "stm32f777xx.h"
+#elif defined(STM32F779xx)
+  #include "stm32f779xx.h"  
+#else
+ #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+/**
+  * @}
+  */
+
+#ifdef USE_HAL_DRIVER
+  #include "stm32f7xx_hal_conf.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F7xx_H */
+
+/**
+  * @}
+  */
+
+  /**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

targets/TARGET_STM/mbed_rtx.h

@@ -452,7 +452,7 @@
 #define OS_CLOCK                216000000
 #endif
 
-#elif defined(TARGET_STM32F746ZG)
+#elif (defined(TARGET_STM32F746ZG) || defined(TARGET_STM32F756ZG))
 
 #ifndef INITIAL_SP
 #define INITIAL_SP              (0x20050000UL)

targets/targets.json

@@ -888,7 +888,7 @@
     "NUCLEO_F746ZG": {
         "inherits": ["Target"],
         "core": "Cortex-M7F",
-        "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746ZG"],
+        "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746ZG", "F746_F756"],
         "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
         "default_toolchain": "ARM",
         "macros": ["TRANSACTION_QUEUE_SIZE_SPI=2"],
@@ -899,6 +899,19 @@
         "release_versions": ["2", "5"],
         "device_name": "STM32F746ZG"
     },
+    "NUCLEO_F756ZG": {
+        "inherits": ["Target"],
+        "core": "Cortex-M7F",
+        "extra_labels": ["STM", "STM32F7", "STM32F756", "STM32F756ZG", "F746_F756"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "default_toolchain": "ARM",
+        "supported_form_factors": ["ARDUINO"],
+        "detect_code": ["0819"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG"],
+        "features": ["LWIP"],
+        "release_versions": ["2", "5"],
+        "device_name": "STM32F756ZG"
+    },
     "NUCLEO_F767ZI": {
         "inherits": ["Target"],
         "core": "Cortex-M7FD",