mirror of https://github.com/ARMmbed/mbed-os.git
Merge pull request #13713 from jeromecoutant/PR_NUCLEO_H7A3
STM32H7: add NUCLEO_H7A3ZI_Q new targetpull/13796/head
commit
fece41d05a
|
@ -73,6 +73,31 @@ so you just have to create a custom_targets.json file with:
|
|||
}
|
||||
```
|
||||
|
||||
## STM32H7A3xx
|
||||
|
||||
STM32H7A3/7B3 devices are based on an Arm Cortex-M7 core (with double-precision floating point unit) running up to 280 MHz.
|
||||
|
||||
[st.com STM32H743ZI MCU page](https://www.st.com/en/microcontrollers-microprocessors/stm32h7a3-7b3.html)
|
||||
|
||||
### NUCLEO_H7A3ZI_Q
|
||||
|
||||
[st.com NUCLEO page](https://www.st.com/en/evaluation-tools/nucleo-h7a3zi-q.html)
|
||||
|
||||
[mbed.com Target page](https://os.mbed.com/platforms/ST-Nucleo-H7A3ZI-Q/)
|
||||
|
||||
- Total FLASH is 2 MB (0x200000)
|
||||
- 2x128 sectors of 8 KB
|
||||
- Flash memory bank 1 @ 0x0800 0000
|
||||
- Flash memory bank 2 @ 0x0810 0000
|
||||
|
||||
- RAM: 1312 KB
|
||||
- DTCM : 128 KB (0x20000) @0x2000 0000
|
||||
- SRAM : 1024 KB (0x100000) @0x2400 0000
|
||||
- SRAM1 : 64 KB (0x10000) @0x3000 0000
|
||||
- SRAM2 : 64 KB (0x10000) @0x3001 0000
|
||||
- SRAM3 : 32 KB (0x8000) @0x3800 0000
|
||||
|
||||
|
||||
# Dual core STM32
|
||||
|
||||
## STM32H747xx
|
||||
|
|
|
@ -0,0 +1,578 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016-2020 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*
|
||||
* Automatically generated from STM32CubeMX/db/mcu/STM32H7A3Z(G-I)TxQ.xml
|
||||
*/
|
||||
|
||||
#include "PeripheralPins.h"
|
||||
#include "mbed_toolchain.h"
|
||||
|
||||
//==============================================================================
|
||||
// Notes
|
||||
//
|
||||
// - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||
// HW peripheral instances. You can use them the same way as any other "normal"
|
||||
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
|
||||
// pinout image on mbed.org.
|
||||
//
|
||||
// - The pins which are connected to other components present on the board have
|
||||
// the comment "Connected to xxx". The pin function may not work properly in this
|
||||
// case. These pins may not be displayed on the board pinout image on mbed.org.
|
||||
// Please read the board reference manual and schematic for more information.
|
||||
//
|
||||
// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
|
||||
// See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
|
||||
//
|
||||
//==============================================================================
|
||||
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INP16
|
||||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INN16
|
||||
{PA_1_ALT0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_INP17
|
||||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_INP14
|
||||
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_INP15
|
||||
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INP18
|
||||
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INN18
|
||||
{PA_5_ALT0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_INP19
|
||||
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INP3
|
||||
{PA_6_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_INP3
|
||||
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INN3
|
||||
{PA_7_ALT0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_INP7
|
||||
{PA_7_ALT1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_INN3
|
||||
{PA_7_ALT2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_INP7
|
||||
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INN5 // Connected to LD1 (Green Led)
|
||||
{PB_0_ALT0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_INP9 // Connected to LD1 (Green Led)
|
||||
{PB_0_ALT1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_INN5 // Connected to LD1 (Green Led)
|
||||
{PB_0_ALT2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_INP9 // Connected to LD1 (Green Led)
|
||||
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INP5
|
||||
{PB_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_INP5
|
||||
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INP10
|
||||
{PC_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_INP10
|
||||
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INN10
|
||||
{PC_1_ALT0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_INP11
|
||||
{PC_1_ALT1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_INN10
|
||||
{PC_1_ALT2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_INP11
|
||||
{PC_2C, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_INN1
|
||||
{PC_2C_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_INP0
|
||||
{PC_3C, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_INP1
|
||||
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INP4
|
||||
{PC_4_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_INP4
|
||||
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INN4
|
||||
{PC_5_ALT0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_INP8
|
||||
{PC_5_ALT1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_INN4
|
||||
{PC_5_ALT2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_INP8
|
||||
{PF_11, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_INP2
|
||||
{PF_14, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_INN2
|
||||
{PF_14_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_INP6
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
|
||||
{ADC_TEMP, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC2_INP18
|
||||
{ADC_VREF, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC2_INP19
|
||||
{ADC_VBAT, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_INP14
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
|
||||
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
|
||||
{PA_6, DAC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC2_OUT1
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_7_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PD_13, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
|
||||
{PF_15, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_6_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
|
||||
{PF_14, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
// TIM5 cannot be used because already used by the us_ticker
|
||||
// (update us_ticker_data.h file if another timer is chosen)
|
||||
MBED_WEAK const PinMap PinMap_PWM[] = {
|
||||
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_1_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
{PA_2_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
{PA_3_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
|
||||
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_5_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PA_6_ALT0, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
{PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PA_7_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_7_ALT2, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 // Connected to USB_FS_VBUS [ZX62RD-AB-5P8_VBUS]
|
||||
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 // Connected to USB_FS_ID [ZX62RD-AB-5P8_ID]
|
||||
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N // Connected to LD1 (Green Led)
|
||||
{PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 // Connected to LD1 (Green Led)
|
||||
{PB_0_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N // Connected to LD1 (Green Led)
|
||||
{PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PB_1_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
|
||||
{PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_7_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
|
||||
{PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N // Connected to LD3 (Red Led)
|
||||
{PB_14_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N // Connected to LD3 (Red Led)
|
||||
{PB_14_ALT1, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 1, 0)}, // TIM12_CH1 // Connected to LD3 (Red Led)
|
||||
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_15_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_15_ALT1, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 2, 0)}, // TIM12_CH2
|
||||
{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_6_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_7_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_8_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PC_9_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||
{PC_12, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PE_4, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PE_5, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PE_6, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
|
||||
{PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PF_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PF_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
{PF_8_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
|
||||
{PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PF_9_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_FS_VBUS [ZX62RD-AB-5P8_VBUS]
|
||||
{PA_9_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_FS_VBUS [ZX62RD-AB-5P8_VBUS]
|
||||
{PA_12, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, // Connected to USB_FS_P [USBLC6-2SC6_IO_2]
|
||||
{PA_15, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PB_4, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_6_ALT0, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_6_ALT1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
|
||||
{PB_9, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PB_13, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_14, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // Connected to LD3 (Red Led)
|
||||
{PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_10_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to STDIO_UART_TX
|
||||
{PD_15, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // Connected to LD2 (Yellow Led)
|
||||
{PE_3, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PG_12, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_FS_ID [ZX62RD-AB-5P8_ID]
|
||||
{PA_10_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_FS_ID [ZX62RD-AB-5P8_ID]
|
||||
{PA_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PB_3, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_7_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
|
||||
{PB_8, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PB_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||
{PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_11_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PD_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to STDIO_UART_RX
|
||||
{PD_14, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_2, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PG_11, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_FS_P [USBLC6-2SC6_IO_2]
|
||||
{PA_12_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_FS_P [USBLC6-2SC6_IO_2]
|
||||
{PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to LD3 (Red Led)
|
||||
{PB_14_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Connected to LD3 (Red Led)
|
||||
{PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_13, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PD_15, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_9, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PF_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PG_8, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PG_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PG_14, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PA_11_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PB_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Connected to LD1 (Green Led)
|
||||
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PB_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_0, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_14, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_10, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PF_9, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{PG_13, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PG_13_ALT0, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PA_7_ALT0, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PB_2, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI3)},
|
||||
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_5_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI3)},
|
||||
{PB_5_ALT1, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PC_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI3)},
|
||||
{PD_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
|
||||
{PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
|
||||
{PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PA_6_ALT0, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PB_4_ALT1, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to LD3 (Red Led)
|
||||
{PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
|
||||
{PG_9, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PA_5_ALT0, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to USB_FS_VBUS [ZX62RD-AB-5P8_VBUS]
|
||||
{PA_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to USB_FS_P [USBLC6-2SC6_IO_2]
|
||||
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PB_3_ALT1, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PC_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
|
||||
{PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
|
||||
{PG_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_0, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
|
||||
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PA_4_ALT1, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
|
||||
{PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PA_15_ALT1, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI6)},
|
||||
{PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)},
|
||||
{PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
|
||||
{PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
|
||||
{PG_8, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
|
||||
{PG_10, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** CAN ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_CAN_RD[] = {
|
||||
{PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PB_5, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PB_12, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PD_0, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_CAN_TD[] = {
|
||||
{PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // Connected to USB_FS_P [USBLC6-2SC6_IO_2]
|
||||
{PB_6, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PB_13, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PD_1, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** QUADSPI ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_QSPI_DATA0[] = {
|
||||
{PB_1, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PC_9, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PD_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PF_8, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_QSPI_DATA1[] = {
|
||||
{PB_0, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1 // Connected to LD1 (Green Led)
|
||||
{PC_10, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{PD_12, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{PF_9, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_QSPI_DATA2[] = {
|
||||
{PA_7, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PE_2, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PF_7, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_QSPI_DATA3[] = {
|
||||
{PA_1, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PA_6, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PD_13, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PF_6, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_QSPI_SCLK[] = {
|
||||
{PA_3, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
|
||||
{PB_2, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
|
||||
{PF_10, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK // Connected to USB_FS_PWR_EN [STMPS2141STR_EN]
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_QSPI_SSEL[] = {
|
||||
{PB_6, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PB_10, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PC_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PE_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PG_6, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PG_12, QSPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P2)}, // OCTOSPIM_P2_NCS
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** OCTOSPI ***
|
||||
|
||||
#if DEVICE_OSPI
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA0[] = {
|
||||
{PB_1, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PC_9, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PD_11, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PF_8, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA1[] = {
|
||||
{PB_0, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1 // Connected to LD1 (Green Led)
|
||||
{PC_10, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{PD_12, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{PF_9, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA2[] = {
|
||||
{PA_7, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PE_2, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PF_7, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA3[] = {
|
||||
{PA_1, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PA_6, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PD_13, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PF_6, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA4[] = {
|
||||
{PC_1, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4
|
||||
{PD_4, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4
|
||||
{PE_7, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA5[] = {
|
||||
{PD_5, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5
|
||||
{PE_8, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA6[] = {
|
||||
{PD_6, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6
|
||||
{PE_9, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6
|
||||
{PG_9, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6
|
||||
{PG_10, OSPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P2)}, // OCTOSPIM_P2_IO6
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DATA7[] = {
|
||||
{PD_7, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7
|
||||
{PE_10, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7
|
||||
{PG_11, OSPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P2)}, // OCTOSPIM_P2_IO7
|
||||
{PG_14, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_DQS[] = {
|
||||
{PA_1, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_DQS
|
||||
{PB_2, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_DQS
|
||||
{PC_5, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_DQS
|
||||
{PG_7, OSPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P2)}, // OCTOSPIM_P2_DQS // Connected to USB_FS_OVCR [STMPS2141STR_FAULT]
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_SCLK[] = {
|
||||
{PA_3, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
|
||||
{PB_2, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
|
||||
{PF_10, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK // Connected to USB_FS_PWR_EN [STMPS2141STR_EN]
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_OCTO_SSEL[] = {
|
||||
{PB_6, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PB_10, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PC_11, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PE_11, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PG_6, OSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PG_12, OSPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P2)}, // OCTOSPIM_P2_NCS
|
||||
{NC, NC, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** USBDEVICE ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_USB_HS[] = {
|
||||
#if (MBED_CONF_TARGET_USB_SPEED == USE_USB_HS_IN_FS)
|
||||
// {PA_8, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_SOF
|
||||
{PA_9, USB_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS // Connected to USB_FS_VBUS [ZX62RD-AB-5P8_VBUS]
|
||||
{PA_10, USB_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ID // Connected to USB_FS_ID [ZX62RD-AB-5P8_ID]
|
||||
{PA_11, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // USB_OTG_HS_DM // Connected to USB_FS_N [USBLC6-2SC6_IO_1]
|
||||
{PA_12, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // USB_OTG_HS_DP // Connected to USB_FS_P [USBLC6-2SC6_IO_2]
|
||||
#else /* MBED_CONF_TARGET_USB_SPEED */
|
||||
{PA_3, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D0
|
||||
{PA_5, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_CK
|
||||
{PB_0, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D1 // Connected to LD1 (Green Led)
|
||||
{PB_1, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D2
|
||||
{PB_5, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D7
|
||||
{PB_10, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D3
|
||||
{PB_11, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D4
|
||||
{PB_12, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D5
|
||||
{PB_13, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D6
|
||||
{PC_0, USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_STP
|
||||
#endif /* MBED_CONF_TARGET_USB_SPEED */
|
||||
{NC, NC, 0}
|
||||
};
|
|
@ -0,0 +1,319 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016-2020 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*
|
||||
* Automatically generated from STM32CubeMX/db/mcu/STM32H7A3Z(G-I)TxQ.xml
|
||||
*/
|
||||
|
||||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "PinNamesTypes.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define ALTC 0xF00
|
||||
|
||||
typedef enum {
|
||||
ALT0 = 0x100,
|
||||
ALT1 = 0x200,
|
||||
ALT2 = 0x300,
|
||||
ALT3 = 0x400,
|
||||
ALT4 = 0x500
|
||||
} ALTx;
|
||||
|
||||
typedef enum {
|
||||
|
||||
PA_0 = 0x00,
|
||||
PA_0C = PA_0 | ALTC, // dual pad
|
||||
PA_1 = 0x01,
|
||||
PA_1C = PA_1 | ALTC, // dual pad
|
||||
PA_1_ALT0 = PA_1 | ALT0, // same pin used for alternate HW
|
||||
PA_2 = 0x02,
|
||||
PA_2_ALT0 = PA_2 | ALT0, // same pin used for alternate HW
|
||||
PA_3 = 0x03,
|
||||
PA_3_ALT0 = PA_3 | ALT0, // same pin used for alternate HW
|
||||
PA_4 = 0x04,
|
||||
PA_4_ALT0 = PA_4 | ALT0, // same pin used for alternate HW
|
||||
PA_4_ALT1 = PA_4 | ALT1, // same pin used for alternate HW
|
||||
PA_5 = 0x05,
|
||||
PA_5_ALT0 = PA_5 | ALT0, // same pin used for alternate HW
|
||||
PA_6 = 0x06,
|
||||
PA_6_ALT0 = PA_6 | ALT0, // same pin used for alternate HW
|
||||
PA_7 = 0x07,
|
||||
PA_7_ALT0 = PA_7 | ALT0, // same pin used for alternate HW
|
||||
PA_7_ALT1 = PA_7 | ALT1, // same pin used for alternate HW
|
||||
PA_7_ALT2 = PA_7 | ALT2, // same pin used for alternate HW
|
||||
PA_8 = 0x08,
|
||||
PA_9 = 0x09,
|
||||
PA_9_ALT0 = PA_9 | ALT0, // same pin used for alternate HW
|
||||
PA_10 = 0x0A,
|
||||
PA_10_ALT0 = PA_10 | ALT0, // same pin used for alternate HW
|
||||
PA_11 = 0x0B,
|
||||
PA_11_ALT0 = PA_11 | ALT0, // same pin used for alternate HW
|
||||
PA_12 = 0x0C,
|
||||
PA_12_ALT0 = PA_12 | ALT0, // same pin used for alternate HW
|
||||
PA_13 = 0x0D,
|
||||
PA_14 = 0x0E,
|
||||
PA_15 = 0x0F,
|
||||
PA_15_ALT0 = PA_15 | ALT0, // same pin used for alternate HW
|
||||
PA_15_ALT1 = PA_15 | ALT1, // same pin used for alternate HW
|
||||
PB_0 = 0x10,
|
||||
PB_0_ALT0 = PB_0 | ALT0, // same pin used for alternate HW
|
||||
PB_0_ALT1 = PB_0 | ALT1, // same pin used for alternate HW
|
||||
PB_0_ALT2 = PB_0 | ALT2, // same pin used for alternate HW
|
||||
PB_1 = 0x11,
|
||||
PB_1_ALT0 = PB_1 | ALT0, // same pin used for alternate HW
|
||||
PB_1_ALT1 = PB_1 | ALT1, // same pin used for alternate HW
|
||||
PB_2 = 0x12,
|
||||
PB_3 = 0x13,
|
||||
PB_3_ALT0 = PB_3 | ALT0, // same pin used for alternate HW
|
||||
PB_3_ALT1 = PB_3 | ALT1, // same pin used for alternate HW
|
||||
PB_4 = 0x14,
|
||||
PB_4_ALT0 = PB_4 | ALT0, // same pin used for alternate HW
|
||||
PB_4_ALT1 = PB_4 | ALT1, // same pin used for alternate HW
|
||||
PB_5 = 0x15,
|
||||
PB_5_ALT0 = PB_5 | ALT0, // same pin used for alternate HW
|
||||
PB_5_ALT1 = PB_5 | ALT1, // same pin used for alternate HW
|
||||
PB_6 = 0x16,
|
||||
PB_6_ALT0 = PB_6 | ALT0, // same pin used for alternate HW
|
||||
PB_6_ALT1 = PB_6 | ALT1, // same pin used for alternate HW
|
||||
PB_7 = 0x17,
|
||||
PB_7_ALT0 = PB_7 | ALT0, // same pin used for alternate HW
|
||||
PB_8 = 0x18,
|
||||
PB_8_ALT0 = PB_8 | ALT0, // same pin used for alternate HW
|
||||
PB_9 = 0x19,
|
||||
PB_9_ALT0 = PB_9 | ALT0, // same pin used for alternate HW
|
||||
PB_10 = 0x1A,
|
||||
PB_11 = 0x1B,
|
||||
PB_12 = 0x1C,
|
||||
PB_13 = 0x1D,
|
||||
PB_14 = 0x1E,
|
||||
PB_14_ALT0 = PB_14 | ALT0, // same pin used for alternate HW
|
||||
PB_14_ALT1 = PB_14 | ALT1, // same pin used for alternate HW
|
||||
PB_15 = 0x1F,
|
||||
PB_15_ALT0 = PB_15 | ALT0, // same pin used for alternate HW
|
||||
PB_15_ALT1 = PB_15 | ALT1, // same pin used for alternate HW
|
||||
PC_0 = 0x20,
|
||||
PC_0_ALT0 = PC_0 | ALT0, // same pin used for alternate HW
|
||||
PC_1 = 0x21,
|
||||
PC_1_ALT0 = PC_1 | ALT0, // same pin used for alternate HW
|
||||
PC_1_ALT1 = PC_1 | ALT1, // same pin used for alternate HW
|
||||
PC_1_ALT2 = PC_1 | ALT2, // same pin used for alternate HW
|
||||
PC_2 = 0x22,
|
||||
PC_2C = PC_2 | ALTC, // dual pad
|
||||
PC_2C_ALT0 = PC_2C | ALT0, // same pin used for alternate HW
|
||||
PC_3 = 0x23,
|
||||
PC_3C = PC_3 | ALTC, // dual pad
|
||||
PC_4 = 0x24,
|
||||
PC_4_ALT0 = PC_4 | ALT0, // same pin used for alternate HW
|
||||
PC_5 = 0x25,
|
||||
PC_5_ALT0 = PC_5 | ALT0, // same pin used for alternate HW
|
||||
PC_5_ALT1 = PC_5 | ALT1, // same pin used for alternate HW
|
||||
PC_5_ALT2 = PC_5 | ALT2, // same pin used for alternate HW
|
||||
PC_6 = 0x26,
|
||||
PC_6_ALT0 = PC_6 | ALT0, // same pin used for alternate HW
|
||||
PC_7 = 0x27,
|
||||
PC_7_ALT0 = PC_7 | ALT0, // same pin used for alternate HW
|
||||
PC_8 = 0x28,
|
||||
PC_8_ALT0 = PC_8 | ALT0, // same pin used for alternate HW
|
||||
PC_9 = 0x29,
|
||||
PC_9_ALT0 = PC_9 | ALT0, // same pin used for alternate HW
|
||||
PC_10 = 0x2A,
|
||||
PC_10_ALT0 = PC_10 | ALT0, // same pin used for alternate HW
|
||||
PC_11 = 0x2B,
|
||||
PC_11_ALT0 = PC_11 | ALT0, // same pin used for alternate HW
|
||||
PC_12 = 0x2C,
|
||||
PC_13 = 0x2D,
|
||||
PC_14 = 0x2E,
|
||||
PC_15 = 0x2F,
|
||||
PD_0 = 0x30,
|
||||
PD_1 = 0x31,
|
||||
PD_2 = 0x32,
|
||||
PD_3 = 0x33,
|
||||
PD_4 = 0x34,
|
||||
PD_5 = 0x35,
|
||||
PD_6 = 0x36,
|
||||
PD_7 = 0x37,
|
||||
PD_8 = 0x38,
|
||||
PD_9 = 0x39,
|
||||
PD_10 = 0x3A,
|
||||
PD_11 = 0x3B,
|
||||
PD_12 = 0x3C,
|
||||
PD_13 = 0x3D,
|
||||
PD_14 = 0x3E,
|
||||
PD_15 = 0x3F,
|
||||
PE_0 = 0x40,
|
||||
PE_1 = 0x41,
|
||||
PE_2 = 0x42,
|
||||
PE_3 = 0x43,
|
||||
PE_4 = 0x44,
|
||||
PE_5 = 0x45,
|
||||
PE_6 = 0x46,
|
||||
PE_7 = 0x47,
|
||||
PE_8 = 0x48,
|
||||
PE_9 = 0x49,
|
||||
PE_10 = 0x4A,
|
||||
PE_11 = 0x4B,
|
||||
PE_12 = 0x4C,
|
||||
PE_13 = 0x4D,
|
||||
PE_14 = 0x4E,
|
||||
PE_15 = 0x4F,
|
||||
PF_6 = 0x56,
|
||||
PF_7 = 0x57,
|
||||
PF_8 = 0x58,
|
||||
PF_8_ALT0 = PF_8 | ALT0, // same pin used for alternate HW
|
||||
PF_9 = 0x59,
|
||||
PF_9_ALT0 = PF_9 | ALT0, // same pin used for alternate HW
|
||||
PF_10 = 0x5A,
|
||||
PF_11 = 0x5B,
|
||||
PF_14 = 0x5E,
|
||||
PF_14_ALT0 = PF_14 | ALT0, // same pin used for alternate HW
|
||||
PF_15 = 0x5F,
|
||||
PG_6 = 0x66,
|
||||
PG_7 = 0x67,
|
||||
PG_8 = 0x68,
|
||||
PG_9 = 0x69,
|
||||
PG_10 = 0x6A,
|
||||
PG_11 = 0x6B,
|
||||
PG_12 = 0x6C,
|
||||
PG_13 = 0x6D,
|
||||
PG_13_ALT0 = PG_13 | ALT0, // same pin used for alternate HW
|
||||
PG_14 = 0x6E,
|
||||
PH_0 = 0x70,
|
||||
PH_1 = 0x71,
|
||||
|
||||
/**** ADC internal channels ****/
|
||||
|
||||
ADC_TEMP = 0xF0, // Internal pin virtual value
|
||||
ADC_VREF = 0xF1, // Internal pin virtual value
|
||||
ADC_VBAT = 0xF2, // Internal pin virtual value
|
||||
|
||||
// Arduino Uno(Rev3) Header pin connection naming
|
||||
A0 = PA_3,
|
||||
A1 = PC_0,
|
||||
A2 = PC_3C,
|
||||
A3 = PB_1,
|
||||
A4 = PC_2C,
|
||||
A5 = PF_11,
|
||||
D0 = PB_7,
|
||||
D1 = PB_6,
|
||||
D2 = PG_14,
|
||||
D3 = PE_13,
|
||||
D4 = PE_14,
|
||||
D5 = PE_11,
|
||||
D6 = PA_8,
|
||||
D7 = PG_12,
|
||||
D8 = PG_9,
|
||||
D9 = PD_15,
|
||||
D10 = PD_14,
|
||||
D11 = PA_7,
|
||||
D12 = PA_6,
|
||||
D13 = PA_5,
|
||||
D14 = PB_9,
|
||||
D15 = PB_8,
|
||||
|
||||
// STDIO for console print
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
|
||||
STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
|
||||
#else
|
||||
STDIO_UART_TX = PD_8,
|
||||
#endif
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
|
||||
STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
|
||||
#else
|
||||
STDIO_UART_RX = PD_9,
|
||||
#endif
|
||||
|
||||
USBTX = STDIO_UART_TX, // used for greentea tests
|
||||
USBRX = STDIO_UART_RX, // used for greentea tests
|
||||
|
||||
// I2C signals aliases
|
||||
I2C_SDA = D14,
|
||||
I2C_SCL = D15,
|
||||
|
||||
// SPI signals aliases
|
||||
SPI_CS = D10,
|
||||
SPI_MOSI = D11,
|
||||
SPI_MISO = D12,
|
||||
SPI_SCK = D13,
|
||||
|
||||
// Standardized LED and button names
|
||||
LED1 = PB_0, // LD1 (Green Led)
|
||||
LED2 = PB_14, // LD3 (Red Led)
|
||||
LED3 = PE_1, // LD2 (Yellow Led)
|
||||
BUTTON1 = PC_13, // B1 (Blue PushButton)
|
||||
|
||||
// Backward legacy names
|
||||
USER_BUTTON = BUTTON1,
|
||||
PWM_OUT = D3,
|
||||
|
||||
/**** USB HS pins ****/
|
||||
USB_OTG_HS_DM = PA_11,
|
||||
USB_OTG_HS_DP = PA_12,
|
||||
USB_OTG_HS_ID = PA_10,
|
||||
USB_OTG_HS_SOF = PA_8,
|
||||
USB_OTG_HS_ULPI_CK = PA_5,
|
||||
USB_OTG_HS_ULPI_D0 = PA_3,
|
||||
USB_OTG_HS_ULPI_D1 = PB_0,
|
||||
USB_OTG_HS_ULPI_D2 = PB_1,
|
||||
USB_OTG_HS_ULPI_D3 = PB_10,
|
||||
USB_OTG_HS_ULPI_D4 = PB_11,
|
||||
USB_OTG_HS_ULPI_D5 = PB_12,
|
||||
USB_OTG_HS_ULPI_D6 = PB_13,
|
||||
USB_OTG_HS_ULPI_D7 = PB_5,
|
||||
USB_OTG_HS_ULPI_STP = PC_0,
|
||||
USB_OTG_HS_VBUS = PA_9,
|
||||
|
||||
/**** OSCILLATOR pins ****/
|
||||
RCC_OSC32_IN = PC_14,
|
||||
RCC_OSC32_OUT = PC_15,
|
||||
RCC_OSC_IN = PH_0,
|
||||
RCC_OSC_OUT = PH_1,
|
||||
|
||||
/**** DEBUG pins ****/
|
||||
DEBUG_JTCK_SWCLK = PA_14,
|
||||
DEBUG_JTDI = PA_15,
|
||||
DEBUG_JTDO_SWO = PB_3,
|
||||
DEBUG_JTMS_SWDIO = PA_13,
|
||||
DEBUG_JTRST = PB_4,
|
||||
DEBUG_TRACECLK = PE_2,
|
||||
DEBUG_TRACED0 = PE_3,
|
||||
DEBUG_TRACED0_ALT0 = PC_1,
|
||||
DEBUG_TRACED0_ALT1 = PG_13,
|
||||
DEBUG_TRACED1 = PE_4,
|
||||
DEBUG_TRACED1_ALT0 = PC_8,
|
||||
DEBUG_TRACED1_ALT1 = PG_14,
|
||||
DEBUG_TRACED2 = PE_5,
|
||||
DEBUG_TRACED2_ALT0 = PD_2,
|
||||
DEBUG_TRACED3 = PE_6,
|
||||
DEBUG_TRACED3_ALT0 = PC_12,
|
||||
DEBUG_TRGIO = PC_7,
|
||||
PWR_PVD_IN = PB_7,
|
||||
PWR_WKUP1 = PA_0,
|
||||
PWR_WKUP2 = PA_2,
|
||||
PWR_WKUP4 = PC_13,
|
||||
PWR_WKUP6 = PC_1,
|
||||
|
||||
// Not connected
|
||||
NC = (int)0xFFFFFFFF
|
||||
} PinName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
|
@ -0,0 +1,559 @@
|
|||
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32h7a3xxq.s
|
||||
;* @author MCD Application Team
|
||||
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2019 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
IMPORT |Image$$ARM_LIB_STACK$$ZI$$Limit|
|
||||
__Vectors DCD |Image$$ARM_LIB_STACK$$ZI$$Limit| ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog interrupt
|
||||
DCD PVD_PVM_IRQHandler ; PVD/PVM through EXTI Line detection
|
||||
DCD RTC_TAMP_STAMP_CSS_LSE_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2
|
||||
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
|
||||
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
|
||||
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
|
||||
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD DFSDM2_IRQHandler ; DFSDM2 Interrupt
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FMC_IRQHandler ; FMC
|
||||
DCD SDMMC1_IRQHandler ; SDMMC1
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
|
||||
DCD DFSDM1_FLT4_IRQHandler ; DFSDM Filter4 Interrupt
|
||||
DCD DFSDM1_FLT5_IRQHandler ; DFSDM Filter5 Interrupt
|
||||
DCD DFSDM1_FLT6_IRQHandler ; DFSDM Filter6 Interrupt
|
||||
DCD DFSDM1_FLT7_IRQHandler ; DFSDM Filter7 Interrupt
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_PSSI_IRQHandler ; DCMI,PSSI
|
||||
DCD 0 ; Reserved
|
||||
DCD RNG_IRQHandler ; Rng
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
DCD UART7_IRQHandler ; UART7
|
||||
DCD UART8_IRQHandler ; UART8
|
||||
DCD SPI4_IRQHandler ; SPI4
|
||||
DCD SPI5_IRQHandler ; SPI5
|
||||
DCD SPI6_IRQHandler ; SPI6
|
||||
DCD SAI1_IRQHandler ; SAI1
|
||||
DCD LTDC_IRQHandler ; LTDC
|
||||
DCD LTDC_ER_IRQHandler ; LTDC error
|
||||
DCD DMA2D_IRQHandler ; DMA2D
|
||||
DCD SAI2_IRQHandler ; SAI2
|
||||
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
|
||||
DCD LPTIM1_IRQHandler ; LPTIM1
|
||||
DCD CEC_IRQHandler ; HDMI_CEC
|
||||
DCD I2C4_EV_IRQHandler ; I2C4 Event
|
||||
DCD I2C4_ER_IRQHandler ; I2C4 Error
|
||||
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
|
||||
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
|
||||
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
|
||||
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
|
||||
DCD TIM15_IRQHandler ; TIM15 global Interrupt
|
||||
DCD TIM16_IRQHandler ; TIM16 global Interrupt
|
||||
DCD TIM17_IRQHandler ; TIM17 global Interrupt
|
||||
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
|
||||
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
|
||||
DCD JPEG_IRQHandler ; JPEG global Interrupt
|
||||
DCD MDMA_IRQHandler ; MDMA global Interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
|
||||
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD DAC2_IRQHandler ; DAC2 global Interrupt
|
||||
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
|
||||
DCD BDMA2_Channel0_IRQHandler ; BDMA2 Channel 0 global Interrupt
|
||||
DCD BDMA2_Channel1_IRQHandler ; BDMA2 Channel 1 global Interrupt
|
||||
DCD BDMA2_Channel2_IRQHandler ; BDMA2 Channel 2 global Interrupt
|
||||
DCD BDMA2_Channel3_IRQHandler ; BDMA2 Channel 3 global Interrupt
|
||||
DCD BDMA2_Channel4_IRQHandler ; BDMA2 Channel 4 global Interrupt
|
||||
DCD BDMA2_Channel5_IRQHandler ; BDMA2 Channel 5 global Interrupt
|
||||
DCD BDMA2_Channel6_IRQHandler ; BDMA2 Channel 6 global Interrupt
|
||||
DCD BDMA2_Channel7_IRQHandler ; BDMA2 Channel 7 global Interrupt
|
||||
DCD COMP_IRQHandler ; COMP global Interrupt
|
||||
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
|
||||
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
|
||||
DCD UART9_IRQHandler ; UART9 global interrupt
|
||||
DCD USART10_IRQHandler ; USART10 global interrupt
|
||||
DCD LPUART1_IRQHandler ; LPUART1 interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
|
||||
DCD ECC_IRQHandler ; ECC_IRQHandler
|
||||
DCD 0 ; Reserved
|
||||
DCD DTS_IRQHandler ; DTS
|
||||
DCD 0 ; Reserved
|
||||
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
|
||||
DCD OCTOSPI2_IRQHandler ; OCTOSPI2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD GFXMMU_IRQHandler ; GFXMMU
|
||||
DCD BDMA1_IRQHandler ; BDMA1
|
||||
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_PVM_IRQHandler [WEAK]
|
||||
EXPORT RTC_TAMP_STAMP_CSS_LSE_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
|
||||
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
|
||||
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
|
||||
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT DFSDM2_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FMC_IRQHandler [WEAK]
|
||||
EXPORT SDMMC1_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT FDCAN_CAL_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT4_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT5_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT6_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT DCMI_PSSI_IRQHandler [WEAK]
|
||||
EXPORT RNG_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
EXPORT UART7_IRQHandler [WEAK]
|
||||
EXPORT UART8_IRQHandler [WEAK]
|
||||
EXPORT SPI4_IRQHandler [WEAK]
|
||||
EXPORT SPI5_IRQHandler [WEAK]
|
||||
EXPORT SPI6_IRQHandler [WEAK]
|
||||
EXPORT SAI1_IRQHandler [WEAK]
|
||||
EXPORT LTDC_IRQHandler [WEAK]
|
||||
EXPORT LTDC_ER_IRQHandler [WEAK]
|
||||
EXPORT DMA2D_IRQHandler [WEAK]
|
||||
EXPORT SAI2_IRQHandler [WEAK]
|
||||
EXPORT OCTOSPI1_IRQHandler [WEAK]
|
||||
EXPORT LPTIM1_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT I2C4_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C4_ER_IRQHandler [WEAK]
|
||||
EXPORT SPDIF_RX_IRQHandler [WEAK]
|
||||
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
|
||||
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
|
||||
EXPORT SWPMI1_IRQHandler [WEAK]
|
||||
EXPORT TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM17_IRQHandler [WEAK]
|
||||
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT MDIOS_IRQHandler [WEAK]
|
||||
EXPORT JPEG_IRQHandler [WEAK]
|
||||
EXPORT MDMA_IRQHandler [WEAK]
|
||||
EXPORT SDMMC2_IRQHandler [WEAK]
|
||||
EXPORT HSEM1_IRQHandler [WEAK]
|
||||
EXPORT DAC2_IRQHandler [WEAK]
|
||||
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel0_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel6_IRQHandler [WEAK]
|
||||
EXPORT BDMA2_Channel7_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT LPTIM2_IRQHandler [WEAK]
|
||||
EXPORT LPTIM3_IRQHandler [WEAK]
|
||||
EXPORT UART9_IRQHandler [WEAK]
|
||||
EXPORT USART10_IRQHandler [WEAK]
|
||||
EXPORT LPUART1_IRQHandler [WEAK]
|
||||
EXPORT CRS_IRQHandler [WEAK]
|
||||
EXPORT ECC_IRQHandler [WEAK]
|
||||
EXPORT DTS_IRQHandler [WEAK]
|
||||
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
|
||||
EXPORT OCTOSPI2_IRQHandler [WEAK]
|
||||
EXPORT GFXMMU_IRQHandler [WEAK]
|
||||
EXPORT BDMA1_IRQHandler [WEAK]
|
||||
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_PVM_IRQHandler
|
||||
RTC_TAMP_STAMP_CSS_LSE_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
FDCAN1_IT0_IRQHandler
|
||||
FDCAN2_IT0_IRQHandler
|
||||
FDCAN1_IT1_IRQHandler
|
||||
FDCAN2_IT1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
DFSDM2_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FMC_IRQHandler
|
||||
SDMMC1_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
FDCAN_CAL_IRQHandler
|
||||
DFSDM1_FLT4_IRQHandler
|
||||
DFSDM1_FLT5_IRQHandler
|
||||
DFSDM1_FLT6_IRQHandler
|
||||
DFSDM1_FLT7_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
DCMI_PSSI_IRQHandler
|
||||
RNG_IRQHandler
|
||||
FPU_IRQHandler
|
||||
UART7_IRQHandler
|
||||
UART8_IRQHandler
|
||||
SPI4_IRQHandler
|
||||
SPI5_IRQHandler
|
||||
SPI6_IRQHandler
|
||||
SAI1_IRQHandler
|
||||
LTDC_IRQHandler
|
||||
LTDC_ER_IRQHandler
|
||||
DMA2D_IRQHandler
|
||||
SAI2_IRQHandler
|
||||
OCTOSPI1_IRQHandler
|
||||
LPTIM1_IRQHandler
|
||||
CEC_IRQHandler
|
||||
I2C4_EV_IRQHandler
|
||||
I2C4_ER_IRQHandler
|
||||
SPDIF_RX_IRQHandler
|
||||
DMAMUX1_OVR_IRQHandler
|
||||
DFSDM1_FLT0_IRQHandler
|
||||
DFSDM1_FLT1_IRQHandler
|
||||
DFSDM1_FLT2_IRQHandler
|
||||
DFSDM1_FLT3_IRQHandler
|
||||
SWPMI1_IRQHandler
|
||||
TIM15_IRQHandler
|
||||
TIM16_IRQHandler
|
||||
TIM17_IRQHandler
|
||||
MDIOS_WKUP_IRQHandler
|
||||
MDIOS_IRQHandler
|
||||
JPEG_IRQHandler
|
||||
MDMA_IRQHandler
|
||||
SDMMC2_IRQHandler
|
||||
HSEM1_IRQHandler
|
||||
DAC2_IRQHandler
|
||||
DMAMUX2_OVR_IRQHandler
|
||||
BDMA2_Channel0_IRQHandler
|
||||
BDMA2_Channel1_IRQHandler
|
||||
BDMA2_Channel2_IRQHandler
|
||||
BDMA2_Channel3_IRQHandler
|
||||
BDMA2_Channel4_IRQHandler
|
||||
BDMA2_Channel5_IRQHandler
|
||||
BDMA2_Channel6_IRQHandler
|
||||
BDMA2_Channel7_IRQHandler
|
||||
COMP_IRQHandler
|
||||
LPTIM2_IRQHandler
|
||||
LPTIM3_IRQHandler
|
||||
UART9_IRQHandler
|
||||
USART10_IRQHandler
|
||||
LPUART1_IRQHandler
|
||||
CRS_IRQHandler
|
||||
ECC_IRQHandler
|
||||
DTS_IRQHandler
|
||||
WAKEUP_PIN_IRQHandler
|
||||
OCTOSPI2_IRQHandler
|
||||
GFXMMU_IRQHandler
|
||||
BDMA1_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
|
@ -0,0 +1,57 @@
|
|||
#! armcc -E
|
||||
; Scatter-Loading Description File
|
||||
;
|
||||
; SPDX-License-Identifier: BSD-3-Clause
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2016-2020 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
#include "../cmsis_nvic.h"
|
||||
|
||||
#if !defined(MBED_APP_START)
|
||||
#define MBED_APP_START MBED_ROM_START
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_APP_SIZE)
|
||||
#define MBED_APP_SIZE MBED_ROM_SIZE
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_CONF_TARGET_BOOT_STACK_SIZE)
|
||||
/* This value is normally defined by the tools to 0x1000 for bare metal and 0x400 for RTOS */
|
||||
#if defined(MBED_BOOT_STACK_SIZE)
|
||||
#define MBED_CONF_TARGET_BOOT_STACK_SIZE MBED_BOOT_STACK_SIZE
|
||||
#else
|
||||
#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x400
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* Round up VECTORS_SIZE to 8 bytes */
|
||||
#define VECTORS_SIZE (((NVIC_NUM_VECTORS * 4) + 7) AND ~7)
|
||||
|
||||
LR_IROM1 MBED_APP_START MBED_APP_SIZE {
|
||||
|
||||
ER_IROM1 MBED_APP_START MBED_APP_SIZE {
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
|
||||
RW_IRAM1 (MBED_RAM_START) { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
|
||||
ARM_LIB_HEAP AlignExpr(+0, 16) EMPTY (MBED_RAM_START + MBED_RAM_SIZE - MBED_CONF_TARGET_BOOT_STACK_SIZE - AlignExpr(ImageLimit(RW_IRAM1), 16)) { ; Heap growing up
|
||||
}
|
||||
|
||||
ARM_LIB_STACK (MBED_RAM_START + MBED_RAM_SIZE) EMPTY -MBED_CONF_TARGET_BOOT_STACK_SIZE { ; Stack region growing down
|
||||
}
|
||||
}
|
|
@ -0,0 +1,740 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32h7a3xxq.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32H7B3xx Devices vector table for GCC based toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m7
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
bl _start
|
||||
bx lr
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_PVM_IRQHandler /* PVD/PVM through EXTI Line detection */
|
||||
.word RTC_TAMP_STAMP_CSS_LSE_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
|
||||
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
|
||||
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
|
||||
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
|
||||
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
|
||||
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word DFSDM2_IRQHandler /* DFSDM2 Interrupt */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FMC_IRQHandler /* FMC */
|
||||
.word SDMMC1_IRQHandler /* SDMMC1 */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
|
||||
.word DFSDM1_FLT4_IRQHandler /* DFSDM Filter4 Interrupt */
|
||||
.word DFSDM1_FLT5_IRQHandler /* DFSDM Filter5 Interrupt */
|
||||
.word DFSDM1_FLT6_IRQHandler /* DFSDM Filter6 Interrupt */
|
||||
.word DFSDM1_FLT7_IRQHandler /* DFSDM Filter7 Interrupt */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
|
||||
.word 0 /* Reserved */
|
||||
.word RNG_IRQHandler /* RNG */
|
||||
.word FPU_IRQHandler /* FPU */
|
||||
.word UART7_IRQHandler /* UART7 */
|
||||
.word UART8_IRQHandler /* UART8 */
|
||||
.word SPI4_IRQHandler /* SPI4 */
|
||||
.word SPI5_IRQHandler /* SPI5 */
|
||||
.word SPI6_IRQHandler /* SPI6 */
|
||||
.word SAI1_IRQHandler /* SAI1 */
|
||||
.word LTDC_IRQHandler /* LTDC */
|
||||
.word LTDC_ER_IRQHandler /* LTDC error */
|
||||
.word DMA2D_IRQHandler /* DMA2D */
|
||||
.word SAI2_IRQHandler /* SAI2 */
|
||||
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
|
||||
.word LPTIM1_IRQHandler /* LPTIM1 */
|
||||
.word CEC_IRQHandler /* HDMI_CEC */
|
||||
.word I2C4_EV_IRQHandler /* I2C4 Event */
|
||||
.word I2C4_ER_IRQHandler /* I2C4 Error */
|
||||
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
|
||||
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
|
||||
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
|
||||
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
|
||||
.word TIM15_IRQHandler /* TIM15 global Interrupt */
|
||||
.word TIM16_IRQHandler /* TIM16 global Interrupt */
|
||||
.word TIM17_IRQHandler /* TIM17 global Interrupt */
|
||||
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
|
||||
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
|
||||
.word JPEG_IRQHandler /* JPEG global Interrupt */
|
||||
.word MDMA_IRQHandler /* MDMA global Interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
|
||||
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word DAC2_IRQHandler /* DAC2 global Interrupt */
|
||||
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
|
||||
.word BDMA2_Channel0_IRQHandler /* BDMA2 Channel 0 global Interrupt */
|
||||
.word BDMA2_Channel1_IRQHandler /* BDMA2 Channel 1 global Interrupt */
|
||||
.word BDMA2_Channel2_IRQHandler /* BDMA2 Channel 2 global Interrupt */
|
||||
.word BDMA2_Channel3_IRQHandler /* BDMA2 Channel 3 global Interrupt */
|
||||
.word BDMA2_Channel4_IRQHandler /* BDMA2 Channel 4 global Interrupt */
|
||||
.word BDMA2_Channel5_IRQHandler /* BDMA2 Channel 5 global Interrupt */
|
||||
.word BDMA2_Channel6_IRQHandler /* BDMA2 Channel 6 global Interrupt */
|
||||
.word BDMA2_Channel7_IRQHandler /* BDMA2 Channel 7 global Interrupt */
|
||||
.word COMP_IRQHandler /* COMP global Interrupt */
|
||||
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
|
||||
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
|
||||
.word UART9_IRQHandler /* UART9 global interrupt */
|
||||
.word USART10_IRQHandler /* USART10 global interrupt */
|
||||
.word LPUART1_IRQHandler /* LP UART1 interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
|
||||
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word DTS_IRQHandler /* DTS */
|
||||
.word 0 /* Reserved */
|
||||
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
|
||||
.word OCTOSPI2_IRQHandler /* OCTOSPI2 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word GFXMMU_IRQHandler /* GFXMMU */
|
||||
.word BDMA1_IRQHandler /* BDMA1 */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_PVM_IRQHandler
|
||||
.thumb_set PVD_PVM_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_TAMP_STAMP_CSS_LSE_IRQHandler
|
||||
.thumb_set RTC_TAMP_STAMP_CSS_LSE_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN1_IT0_IRQHandler
|
||||
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN2_IT0_IRQHandler
|
||||
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN1_IT1_IRQHandler
|
||||
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN2_IT1_IRQHandler
|
||||
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM2_IRQHandler
|
||||
.thumb_set DFSDM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FMC_IRQHandler
|
||||
.thumb_set FMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC1_IRQHandler
|
||||
.thumb_set SDMMC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN_CAL_IRQHandler
|
||||
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT4_IRQHandler
|
||||
.thumb_set DFSDM1_FLT4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT5_IRQHandler
|
||||
.thumb_set DFSDM1_FLT5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT6_IRQHandler
|
||||
.thumb_set DFSDM1_FLT6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT7_IRQHandler
|
||||
.thumb_set DFSDM1_FLT7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_PSSI_IRQHandler
|
||||
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
|
||||
|
||||
.weak RNG_IRQHandler
|
||||
.thumb_set RNG_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART7_IRQHandler
|
||||
.thumb_set UART7_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART8_IRQHandler
|
||||
.thumb_set UART8_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI4_IRQHandler
|
||||
.thumb_set SPI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI5_IRQHandler
|
||||
.thumb_set SPI5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI6_IRQHandler
|
||||
.thumb_set SPI6_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI1_IRQHandler
|
||||
.thumb_set SAI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_IRQHandler
|
||||
.thumb_set LTDC_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_ER_IRQHandler
|
||||
.thumb_set LTDC_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2D_IRQHandler
|
||||
.thumb_set DMA2D_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI2_IRQHandler
|
||||
.thumb_set SAI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak OCTOSPI1_IRQHandler
|
||||
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM1_IRQHandler
|
||||
.thumb_set LPTIM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_EV_IRQHandler
|
||||
.thumb_set I2C4_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_ER_IRQHandler
|
||||
.thumb_set I2C4_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPDIF_RX_IRQHandler
|
||||
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMAMUX1_OVR_IRQHandler
|
||||
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT0_IRQHandler
|
||||
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT1_IRQHandler
|
||||
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT2_IRQHandler
|
||||
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT3_IRQHandler
|
||||
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SWPMI1_IRQHandler
|
||||
.thumb_set SWPMI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM15_IRQHandler
|
||||
.thumb_set TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM16_IRQHandler
|
||||
.thumb_set TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM17_IRQHandler
|
||||
.thumb_set TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDIOS_WKUP_IRQHandler
|
||||
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDIOS_IRQHandler
|
||||
.thumb_set MDIOS_IRQHandler,Default_Handler
|
||||
|
||||
.weak JPEG_IRQHandler
|
||||
.thumb_set JPEG_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDMA_IRQHandler
|
||||
.thumb_set MDMA_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC2_IRQHandler
|
||||
.thumb_set SDMMC2_IRQHandler,Default_Handler
|
||||
|
||||
.weak HSEM1_IRQHandler
|
||||
.thumb_set HSEM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC2_IRQHandler
|
||||
.thumb_set DAC2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMAMUX2_OVR_IRQHandler
|
||||
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel0_IRQHandler
|
||||
.thumb_set BDMA2_Channel0_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel1_IRQHandler
|
||||
.thumb_set BDMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel2_IRQHandler
|
||||
.thumb_set BDMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel3_IRQHandler
|
||||
.thumb_set BDMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel4_IRQHandler
|
||||
.thumb_set BDMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel5_IRQHandler
|
||||
.thumb_set BDMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel6_IRQHandler
|
||||
.thumb_set BDMA2_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA2_Channel7_IRQHandler
|
||||
.thumb_set BDMA2_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM2_IRQHandler
|
||||
.thumb_set LPTIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM3_IRQHandler
|
||||
.thumb_set LPTIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM4_IRQHandler
|
||||
.thumb_set LPTIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM5_IRQHandler
|
||||
.thumb_set LPTIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART9_IRQHandler
|
||||
.thumb_set UART9_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART10_IRQHandler
|
||||
.thumb_set USART10_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPUART1_IRQHandler
|
||||
.thumb_set LPUART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRS_IRQHandler
|
||||
.thumb_set CRS_IRQHandler,Default_Handler
|
||||
|
||||
.weak ECC_IRQHandler
|
||||
.thumb_set ECC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DTS_IRQHandler
|
||||
.thumb_set DTS_IRQHandler,Default_Handler
|
||||
|
||||
.weak WAKEUP_PIN_IRQHandler
|
||||
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OCTOSPI2_IRQHandler
|
||||
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak GFXMMU_IRQHandler
|
||||
.thumb_set GFXMMU_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA1_IRQHandler
|
||||
.thumb_set BDMA1_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,207 @@
|
|||
/* Linker script to configure memory regions. */
|
||||
/*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016-2020 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "../cmsis_nvic.h"
|
||||
|
||||
|
||||
#if !defined(MBED_APP_START)
|
||||
#define MBED_APP_START MBED_ROM_START
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_APP_SIZE)
|
||||
#define MBED_APP_SIZE MBED_ROM_SIZE
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_CONF_TARGET_BOOT_STACK_SIZE)
|
||||
/* This value is normally defined by the tools
|
||||
to 0x1000 for bare metal and 0x400 for RTOS */
|
||||
#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x400
|
||||
#endif
|
||||
|
||||
/* Round up VECTORS_SIZE to 8 bytes */
|
||||
#define VECTORS_SIZE (((NVIC_NUM_VECTORS * 4) + 7) & 0xFFFFFFF8)
|
||||
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
|
||||
DTCMRAM (rwx) : ORIGIN = NVIC_RAM_VECTOR_ADDRESS + VECTORS_SIZE, LENGTH = 128K - VECTORS_SIZE
|
||||
RAM (xrw) : ORIGIN = MBED_RAM_START, LENGTH = MBED_RAM_SIZE
|
||||
RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K
|
||||
RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K
|
||||
ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
/* Linker script to place sections and symbol values. Should be used together
|
||||
* with other linker script that defines memory regions FLASH and RAM.
|
||||
* It references following symbols, which must be defined in code:
|
||||
* Reset_Handler : Entry of reset handler
|
||||
*
|
||||
* It defines following symbols, which code can use without definition:
|
||||
* __exidx_start
|
||||
* __exidx_end
|
||||
* __etext
|
||||
* __data_start__
|
||||
* __preinit_array_start
|
||||
* __preinit_array_end
|
||||
* __init_array_start
|
||||
* __init_array_end
|
||||
* __fini_array_start
|
||||
* __fini_array_end
|
||||
* __data_end__
|
||||
* __bss_start__
|
||||
* __bss_end__
|
||||
* __end__
|
||||
* end
|
||||
* __HeapLimit
|
||||
* __StackLimit
|
||||
* __StackTop
|
||||
* __stack
|
||||
* _estack
|
||||
*/
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
KEEP(*(.isr_vector))
|
||||
*(.text*)
|
||||
|
||||
KEEP(*(.init))
|
||||
KEEP(*(.fini))
|
||||
|
||||
/* .ctors */
|
||||
*crtbegin.o(.ctors)
|
||||
*crtbegin?.o(.ctors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
||||
*(SORT(.ctors.*))
|
||||
*(.ctors)
|
||||
|
||||
/* .dtors */
|
||||
*crtbegin.o(.dtors)
|
||||
*crtbegin?.o(.dtors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
||||
*(SORT(.dtors.*))
|
||||
*(.dtors)
|
||||
|
||||
*(.rodata*)
|
||||
|
||||
KEEP(*(.eh_frame*))
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > FLASH
|
||||
__exidx_end = .;
|
||||
|
||||
__etext = .;
|
||||
_sidata = .;
|
||||
|
||||
.data : AT (__etext)
|
||||
{
|
||||
__data_start__ = .;
|
||||
_sdata = .;
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
|
||||
. = ALIGN(8);
|
||||
/* preinit data */
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP(*(.preinit_array))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
|
||||
. = ALIGN(8);
|
||||
/* init data */
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP(*(SORT(.init_array.*)))
|
||||
KEEP(*(.init_array))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
|
||||
. = ALIGN(8);
|
||||
/* finit data */
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP(*(SORT(.fini_array.*)))
|
||||
KEEP(*(.fini_array))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
|
||||
KEEP(*(.jcr*))
|
||||
. = ALIGN(8);
|
||||
/* All data end */
|
||||
__data_end__ = .;
|
||||
_edata = .;
|
||||
|
||||
} > RAM
|
||||
|
||||
/* Uninitialized data section
|
||||
* This region is not initialized by the C/C++ library and can be used to
|
||||
* store state across soft reboots. */
|
||||
.uninitialized (NOLOAD):
|
||||
{
|
||||
. = ALIGN(32);
|
||||
__uninitialized_start = .;
|
||||
*(.uninitialized)
|
||||
KEEP(*(.keep.uninitialized))
|
||||
. = ALIGN(32);
|
||||
__uninitialized_end = .;
|
||||
} > RAM
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
__bss_start__ = .;
|
||||
_sbss = .;
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(8);
|
||||
__bss_end__ = .;
|
||||
_ebss = .;
|
||||
} > RAM
|
||||
|
||||
.heap (COPY):
|
||||
{
|
||||
__end__ = .;
|
||||
PROVIDE(end = .);
|
||||
*(.heap*)
|
||||
. = ORIGIN(RAM) + LENGTH(RAM) - MBED_CONF_TARGET_BOOT_STACK_SIZE;
|
||||
__HeapLimit = .;
|
||||
} > RAM
|
||||
|
||||
/* .stack_dummy section doesn't contains any symbols. It is only
|
||||
* used for linker to calculate size of stack sections, and assign
|
||||
* values to stack symbols later */
|
||||
.stack_dummy (COPY):
|
||||
{
|
||||
*(.stack*)
|
||||
} > RAM
|
||||
|
||||
/* Set stack top to end of RAM, and stack limit move down by
|
||||
* size of stack_dummy section */
|
||||
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
|
||||
_estack = __StackTop;
|
||||
__StackLimit = __StackTop - MBED_CONF_TARGET_BOOT_STACK_SIZE;
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
|
||||
}
|
|
@ -0,0 +1,956 @@
|
|||
;/******************************************************************************
|
||||
; * @file startup_stm32h7a3xxq.s
|
||||
; * @author MCD Application Team
|
||||
; * @brief STM32H7B3xx devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
;* All rights reserved.</center></h2>
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog Interrupt
|
||||
DCD PVD_PVM_IRQHandler ; PVD/PVM through EXTI Line detection
|
||||
DCD RTC_TAMP_STAMP_CSS_LSE_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2
|
||||
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
|
||||
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
|
||||
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
|
||||
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD DFSDM2_IRQHandler ; DFSDM2 Interrupt
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 glob
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FMC_IRQHandler ; FMC
|
||||
DCD SDMMC1_IRQHandler ; SDMMC1
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
|
||||
DCD DFSDM1_FLT4_IRQHandler ; DFSDM Filter4 Interrupt
|
||||
DCD DFSDM1_FLT5_IRQHandler ; DFSDM Filter5 Interrupt
|
||||
DCD DFSDM1_FLT6_IRQHandler ; DFSDM Filter6 Interrupt
|
||||
DCD DFSDM1_FLT7_IRQHandler ; DFSDM Filter7 Interrupt
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
|
||||
DCD 0 ; Reserved
|
||||
DCD RNG_IRQHandler ; Rng
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
DCD UART7_IRQHandler ; UART7
|
||||
DCD UART8_IRQHandler ; UART8
|
||||
DCD SPI4_IRQHandler ; SPI4
|
||||
DCD SPI5_IRQHandler ; SPI5
|
||||
DCD SPI6_IRQHandler ; SPI6
|
||||
DCD SAI1_IRQHandler ; SAI1
|
||||
DCD LTDC_IRQHandler ; LTDC
|
||||
DCD LTDC_ER_IRQHandler ; LTDC error
|
||||
DCD DMA2D_IRQHandler ; DMA2D
|
||||
DCD SAI2_IRQHandler ; SAI2
|
||||
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
|
||||
DCD LPTIM1_IRQHandler ; LPTIM1
|
||||
DCD CEC_IRQHandler ; HDMI_CEC
|
||||
DCD I2C4_EV_IRQHandler ; I2C4 Event
|
||||
DCD I2C4_ER_IRQHandler ; I2C4 Error
|
||||
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
|
||||
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
|
||||
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
|
||||
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
|
||||
DCD TIM15_IRQHandler ; TIM15 global Interrupt
|
||||
DCD TIM16_IRQHandler ; TIM16 global Interrupt
|
||||
DCD TIM17_IRQHandler ; TIM17 global Interrupt
|
||||
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
|
||||
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
|
||||
DCD JPEG_IRQHandler ; JPEG global Interrupt
|
||||
DCD MDMA_IRQHandler ; MDMA global Interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
|
||||
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD DAC2_IRQHandler ; DAC2 global Interrupt
|
||||
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
|
||||
DCD BDMA2_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
|
||||
DCD BDMA2_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
|
||||
DCD BDMA2_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
|
||||
DCD BDMA2_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
|
||||
DCD BDMA2_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
|
||||
DCD BDMA2_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
|
||||
DCD BDMA2_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
|
||||
DCD BDMA2_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
|
||||
DCD COMP_IRQHandler ; COMP global Interrupt
|
||||
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
|
||||
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
|
||||
DCD UART9_IRQHandler ; UART9 global interrupt
|
||||
DCD USART10_IRQHandler ; USART10 global interrupt
|
||||
DCD LPUART1_IRQHandler ; LP UART1 interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
|
||||
DCD ECC_IRQHandler ; ECC
|
||||
DCD 0 ; Reserved
|
||||
DCD DTS_IRQHandler ; DTS
|
||||
DCD 0 ; Reserved
|
||||
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
|
||||
DCD OCTOSPI2_IRQHandler ; OCTOSPI2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD GFXMMU_IRQHandler ; GFXMMU
|
||||
DCD BDMA1_IRQHandler ; BDMA1
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_PVM_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
PVD_PVM_IRQHandler
|
||||
B PVD_PVM_IRQHandler
|
||||
|
||||
PUBWEAK RTC_TAMP_STAMP_CSS_LSE_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
RTC_TAMP_STAMP_CSS_LSE_IRQHandler
|
||||
B RTC_TAMP_STAMP_CSS_LSE_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream0_IRQHandler
|
||||
B DMA1_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream1_IRQHandler
|
||||
B DMA1_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream2_IRQHandler
|
||||
B DMA1_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream3_IRQHandler
|
||||
B DMA1_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream4_IRQHandler
|
||||
B DMA1_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream5_IRQHandler
|
||||
B DMA1_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream6_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream6_IRQHandler
|
||||
B DMA1_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK ADC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
ADC_IRQHandler
|
||||
B ADC_IRQHandler
|
||||
|
||||
PUBWEAK FDCAN1_IT0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FDCAN1_IT0_IRQHandler
|
||||
B FDCAN1_IT0_IRQHandler
|
||||
|
||||
PUBWEAK FDCAN2_IT0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FDCAN2_IT0_IRQHandler
|
||||
B FDCAN2_IT0_IRQHandler
|
||||
|
||||
PUBWEAK FDCAN1_IT1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FDCAN1_IT1_IRQHandler
|
||||
B FDCAN1_IT1_IRQHandler
|
||||
|
||||
PUBWEAK FDCAN2_IT1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FDCAN2_IT1_IRQHandler
|
||||
B FDCAN2_IT1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM1_BRK_IRQHandler
|
||||
B TIM1_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM1_UP_IRQHandler
|
||||
B TIM1_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
B TIM1_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM2_IRQHandler
|
||||
B DFSDM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream7_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA1_Stream7_IRQHandler
|
||||
B DMA1_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK FMC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FMC_IRQHandler
|
||||
B FMC_IRQHandler
|
||||
|
||||
PUBWEAK SDMMC1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SDMMC1_IRQHandler
|
||||
B SDMMC1_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream0_IRQHandler
|
||||
B DMA2_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream1_IRQHandler
|
||||
B DMA2_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream2_IRQHandler
|
||||
B DMA2_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream3_IRQHandler
|
||||
B DMA2_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream4_IRQHandler
|
||||
B DMA2_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK FDCAN_CAL_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FDCAN_CAL_IRQHandler
|
||||
B FDCAN_CAL_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT4_IRQHandler
|
||||
B DFSDM1_FLT4_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT5_IRQHandler
|
||||
B DFSDM1_FLT5_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT6_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT6_IRQHandler
|
||||
B DFSDM1_FLT6_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT7_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT7_IRQHandler
|
||||
B DFSDM1_FLT7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream5_IRQHandler
|
||||
B DMA2_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream6_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream6_IRQHandler
|
||||
B DMA2_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream7_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2_Stream7_IRQHandler
|
||||
B DMA2_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK USART6_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
USART6_IRQHandler
|
||||
B USART6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_OUT_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
B OTG_HS_EP1_OUT_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_IN_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
B OTG_HS_EP1_IN_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
B OTG_HS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
OTG_HS_IRQHandler
|
||||
B OTG_HS_IRQHandler
|
||||
|
||||
PUBWEAK DCMI_PSSI_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DCMI_PSSI_IRQHandler
|
||||
B DCMI_PSSI_IRQHandler
|
||||
|
||||
PUBWEAK RNG_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
RNG_IRQHandler
|
||||
B RNG_IRQHandler
|
||||
|
||||
PUBWEAK FPU_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
FPU_IRQHandler
|
||||
B FPU_IRQHandler
|
||||
|
||||
PUBWEAK UART7_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
UART7_IRQHandler
|
||||
B UART7_IRQHandler
|
||||
|
||||
PUBWEAK UART8_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
UART8_IRQHandler
|
||||
B UART8_IRQHandler
|
||||
|
||||
PUBWEAK SPI4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPI4_IRQHandler
|
||||
B SPI4_IRQHandler
|
||||
|
||||
PUBWEAK SPI5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPI5_IRQHandler
|
||||
B SPI5_IRQHandler
|
||||
|
||||
PUBWEAK SPI6_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPI6_IRQHandler
|
||||
B SPI6_IRQHandler
|
||||
|
||||
PUBWEAK SAI1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SAI1_IRQHandler
|
||||
B SAI1_IRQHandler
|
||||
|
||||
PUBWEAK LTDC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
LTDC_IRQHandler
|
||||
B LTDC_IRQHandler
|
||||
|
||||
PUBWEAK LTDC_ER_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
LTDC_ER_IRQHandler
|
||||
B LTDC_ER_IRQHandler
|
||||
|
||||
PUBWEAK DMA2D_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMA2D_IRQHandler
|
||||
B DMA2D_IRQHandler
|
||||
|
||||
PUBWEAK SAI2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SAI2_IRQHandler
|
||||
B SAI2_IRQHandler
|
||||
|
||||
PUBWEAK OCTOSPI1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
OCTOSPI1_IRQHandler
|
||||
B OCTOSPI1_IRQHandler
|
||||
|
||||
PUBWEAK LPTIM1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
LPTIM1_IRQHandler
|
||||
B LPTIM1_IRQHandler
|
||||
|
||||
PUBWEAK CEC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
CEC_IRQHandler
|
||||
B CEC_IRQHandler
|
||||
|
||||
PUBWEAK I2C4_EV_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C4_EV_IRQHandler
|
||||
B I2C4_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C4_ER_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
I2C4_ER_IRQHandler
|
||||
B I2C4_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPDIF_RX_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SPDIF_RX_IRQHandler
|
||||
B SPDIF_RX_IRQHandler
|
||||
|
||||
PUBWEAK DMAMUX1_OVR_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
|
||||
DMAMUX1_OVR_IRQHandler
|
||||
B DMAMUX1_OVR_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
|
||||
DFSDM1_FLT0_IRQHandler
|
||||
B DFSDM1_FLT0_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT1_IRQHandler
|
||||
B DFSDM1_FLT1_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT2_IRQHandler
|
||||
B DFSDM1_FLT2_IRQHandler
|
||||
|
||||
PUBWEAK DFSDM1_FLT3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DFSDM1_FLT3_IRQHandler
|
||||
B DFSDM1_FLT3_IRQHandler
|
||||
|
||||
PUBWEAK SWPMI1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SWPMI1_IRQHandler
|
||||
B SWPMI1_IRQHandler
|
||||
|
||||
PUBWEAK TIM15_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM15_IRQHandler
|
||||
B TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM16_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM16_IRQHandler
|
||||
B TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM17_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
TIM17_IRQHandler
|
||||
B TIM17_IRQHandler
|
||||
|
||||
PUBWEAK MDIOS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
MDIOS_WKUP_IRQHandler
|
||||
B MDIOS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK MDIOS_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
MDIOS_IRQHandler
|
||||
B MDIOS_IRQHandler
|
||||
|
||||
PUBWEAK JPEG_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
JPEG_IRQHandler
|
||||
B JPEG_IRQHandler
|
||||
|
||||
PUBWEAK MDMA_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
MDMA_IRQHandler
|
||||
B MDMA_IRQHandler
|
||||
|
||||
PUBWEAK SDMMC2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
SDMMC2_IRQHandler
|
||||
B SDMMC2_IRQHandler
|
||||
|
||||
PUBWEAK HSEM1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
HSEM1_IRQHandler
|
||||
B HSEM1_IRQHandler
|
||||
|
||||
PUBWEAK DAC2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DAC2_IRQHandler
|
||||
B DAC2_IRQHandler
|
||||
|
||||
PUBWEAK DMAMUX2_OVR_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DMAMUX2_OVR_IRQHandler
|
||||
B DMAMUX2_OVR_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel0_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel0_IRQHandler
|
||||
B BDMA2_Channel0_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel1_IRQHandler
|
||||
B BDMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel2_IRQHandler
|
||||
B BDMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel3_IRQHandler
|
||||
B BDMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel4_IRQHandler
|
||||
B BDMA2_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel5_IRQHandler
|
||||
B BDMA2_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel6_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel6_IRQHandler
|
||||
B BDMA2_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK BDMA2_Channel7_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA2_Channel7_IRQHandler
|
||||
B BDMA2_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK COMP_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
COMP_IRQHandler
|
||||
B COMP_IRQHandler
|
||||
|
||||
PUBWEAK LPTIM2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
LPTIM2_IRQHandler
|
||||
B LPTIM2_IRQHandler
|
||||
|
||||
PUBWEAK LPTIM3_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
LPTIM3_IRQHandler
|
||||
B LPTIM3_IRQHandler
|
||||
|
||||
PUBWEAK UART9_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
UART9_IRQHandler
|
||||
B UART9_IRQHandler
|
||||
|
||||
PUBWEAK USART10_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
USART10_IRQHandler
|
||||
B USART10_IRQHandler
|
||||
|
||||
PUBWEAK LPUART1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
LPUART1_IRQHandler
|
||||
B LPUART1_IRQHandler
|
||||
|
||||
PUBWEAK CRS_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
CRS_IRQHandler
|
||||
B CRS_IRQHandler
|
||||
|
||||
PUBWEAK ECC_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
ECC_IRQHandler
|
||||
B ECC_IRQHandler
|
||||
|
||||
PUBWEAK DTS_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
DTS_IRQHandler
|
||||
B DTS_IRQHandler
|
||||
|
||||
PUBWEAK WAKEUP_PIN_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
WAKEUP_PIN_IRQHandler
|
||||
B WAKEUP_PIN_IRQHandler
|
||||
|
||||
PUBWEAK OCTOSPI2_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
OCTOSPI2_IRQHandler
|
||||
B OCTOSPI2_IRQHandler
|
||||
|
||||
PUBWEAK GFXMMU_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
GFXMMU_IRQHandler
|
||||
B GFXMMU_IRQHandler
|
||||
|
||||
PUBWEAK BDMA1_IRQHandler
|
||||
SECTION .text:CODE:NOROOT:REORDER(1)
|
||||
BDMA1_IRQHandler
|
||||
B BDMA1_IRQHandler
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,59 @@
|
|||
/* Linker script to configure memory regions.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016-2020 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Device specific values */
|
||||
|
||||
/* Tools provide -DMBED_ROM_START=xxx -DMBED_ROM_SIZE=xxx -DMBED_RAM_START=xxx -DMBED_RAM_SIZE=xxx */
|
||||
|
||||
define symbol VECTORS = 171; /* This value must match NVIC_NUM_VECTORS in cmsis_nvic.h */
|
||||
define symbol HEAP_SIZE = 0x1000;
|
||||
|
||||
/* Common - Do not change */
|
||||
|
||||
if (!isdefinedsymbol(MBED_APP_START)) {
|
||||
define symbol MBED_APP_START = MBED_ROM_START;
|
||||
}
|
||||
|
||||
if (!isdefinedsymbol(MBED_APP_SIZE)) {
|
||||
define symbol MBED_APP_SIZE = MBED_ROM_SIZE;
|
||||
}
|
||||
|
||||
if (!isdefinedsymbol(MBED_CONF_TARGET_BOOT_STACK_SIZE)) {
|
||||
/* This value is normally defined by the tools
|
||||
to 0x1000 for bare metal and 0x400 for RTOS */
|
||||
define symbol MBED_CONF_TARGET_BOOT_STACK_SIZE = 0x400;
|
||||
}
|
||||
|
||||
/* Round up VECTORS_SIZE to 8 bytes */
|
||||
define symbol VECTORS_SIZE = ((VECTORS * 4) + 7) & ~7;
|
||||
define symbol RAM_REGION_START = MBED_RAM_START + VECTORS_SIZE;
|
||||
define symbol RAM_REGION_SIZE = MBED_RAM_SIZE - VECTORS_SIZE;
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from MBED_APP_START size MBED_APP_SIZE];
|
||||
define region RAM_region = mem:[from RAM_REGION_START size RAM_REGION_SIZE];
|
||||
|
||||
define block CSTACK with alignment = 8, size = MBED_CONF_TARGET_BOOT_STACK_SIZE { };
|
||||
define block HEAP with alignment = 8, size = HEAP_SIZE { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem: MBED_APP_START { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
|
@ -0,0 +1,39 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016-2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_CMSIS_NVIC_H
|
||||
#define MBED_CMSIS_NVIC_H
|
||||
|
||||
#if !defined(MBED_ROM_START)
|
||||
#define MBED_ROM_START 0x8000000
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_ROM_SIZE)
|
||||
#define MBED_ROM_SIZE 0x200000 // 2.0 MB
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_RAM_START)
|
||||
#define MBED_RAM_START 0x24000000
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_RAM_SIZE)
|
||||
#define MBED_RAM_SIZE 0x100000 // 1.0 MB
|
||||
#endif
|
||||
|
||||
#define NVIC_NUM_VECTORS 171
|
||||
#define NVIC_RAM_VECTOR_ADDRESS 0x20000000
|
||||
|
||||
#endif
|
|
@ -0,0 +1,200 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015-2020 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/**
|
||||
* This file configures the system clock as follows:
|
||||
*--------------------------------------------------------------------
|
||||
* System clock source | 1- USE_PLL_HSE_EXTC (external 8 MHz clock)
|
||||
* | 2- USE_PLL_HSE_XTAL (external 8 MHz xtal)
|
||||
* | 3- USE_PLL_HSI (internal 64 MHz clock)
|
||||
*--------------------------------------------------------------------
|
||||
* SYSCLK(MHz) | 280
|
||||
* USB capable (48 MHz) | YES
|
||||
*--------------------------------------------------------------------
|
||||
**/
|
||||
|
||||
#include "stm32h7xx.h"
|
||||
#include "mbed_error.h"
|
||||
|
||||
// clock source is selected with CLOCK_SOURCE in json config
|
||||
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO)
|
||||
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
|
||||
#define USE_PLL_HSI 0x2 // Use HSI internal clock
|
||||
|
||||
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
|
||||
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
|
||||
uint8_t SetSysClock_PLL_HSI(void);
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
void SetSysClock(void)
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC)
|
||||
/* 1- Try to start with HSE and external clock (MCO from STLink PCB part) */
|
||||
if (SetSysClock_PLL_HSE(1) == 0)
|
||||
#endif
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL)
|
||||
/* 2- If fail try to start with HSE and external xtal */
|
||||
if (SetSysClock_PLL_HSE(0) == 0)
|
||||
#endif
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0)
|
||||
#endif
|
||||
{
|
||||
error("SetSysClock failed\n");
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
|
||||
/* Supply configuration update enable */
|
||||
HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY);
|
||||
|
||||
/* Configure the main internal regulator output voltage */
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
|
||||
|
||||
while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI48;
|
||||
if (bypass) {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
||||
} else {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
}
|
||||
#if HSE_VALUE==8000000
|
||||
RCC_OscInitStruct.PLL.PLLM = 4; // 2 MHz
|
||||
RCC_OscInitStruct.PLL.PLLN = 280; // 560 MHz
|
||||
#else
|
||||
#error Unsupported externall clock value, check HSE_VALUE define
|
||||
#endif
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLP = 2; // PLLCLK = SYSCLK = 280 MHz
|
||||
RCC_OscInitStruct.PLL.PLLQ = 56; // PLL1Q used for FDCAN = 10 MHz
|
||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_1;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure bus clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
|
||||
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 |
|
||||
RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_D3PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
#if DEVICE_USBDEVICE
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
HAL_PWREx_EnableUSBVoltageDetector();
|
||||
#endif /* DEVICE_USBDEVICE */
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
|
||||
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/*!< Supply configuration update enable */
|
||||
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
|
||||
/* Configure the main internal regulator output voltage */
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
|
||||
// Enable HSI oscillator and activate PLL with HSI as source
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_CSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||
RCC_OscInitStruct.CSIState = RCC_CSI_OFF;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 32; // 2 MHz
|
||||
RCC_OscInitStruct.PLL.PLLN = 280; // 560 MHz
|
||||
RCC_OscInitStruct.PLL.PLLP = 2; // PLLCLK = SYSCLK = 280 MHz
|
||||
RCC_OscInitStruct.PLL.PLLQ = 56; // PLL1Q used for FDCAN = 10 MHz
|
||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure bus clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
|
||||
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 |
|
||||
RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_D3PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
|
|
@ -2836,6 +2836,40 @@
|
|||
],
|
||||
"device_name": "STM32H747XIHx"
|
||||
},
|
||||
"MCU_STM32H7A3xIQ": {
|
||||
"inherits": [
|
||||
"MCU_STM32H7"
|
||||
],
|
||||
"public": false,
|
||||
"core": "Cortex-M7FD",
|
||||
"mbed_rom_start": "0x08000000",
|
||||
"mbed_rom_size": "0x200000",
|
||||
"mbed_ram_start": "0x24000000",
|
||||
"mbed_ram_size": "0x100000",
|
||||
"extra_labels_add": [
|
||||
"STM32H7A3xIQ"
|
||||
],
|
||||
"macros_add": [
|
||||
"STM32H7A3xxQ"
|
||||
]
|
||||
},
|
||||
"NUCLEO_H7A3ZI_Q": {
|
||||
"inherits": [
|
||||
"MCU_STM32H7A3xIQ"
|
||||
],
|
||||
"config": {
|
||||
"hse_value": {
|
||||
"value": "8000000",
|
||||
"macro_name": "HSE_VALUE"
|
||||
}
|
||||
},
|
||||
"supported_form_factors": [
|
||||
"ARDUINO"
|
||||
],
|
||||
"detect_code": [
|
||||
"0860"
|
||||
]
|
||||
},
|
||||
"MCU_STM32L0": {
|
||||
"inherits": [
|
||||
"MCU_STM32"
|
||||
|
|
Loading…
Reference in New Issue