TESTS: fix timing drift test in rtos folder

rtos/tests/TESTS/host_tests/timing_drift_auto.py

@@ -0,0 +1,136 @@
+"""
+mbed SDK
+Copyright (c) 2011-2013 ARM Limited
+SPDX-License-Identifier: Apache-2.0
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
+
+from mbed_host_tests import BaseHostTest
+import time
+
+
+class TimingDriftSync(BaseHostTest):
+    """
+    This works as master-slave fashion
+    1) Device says its booted up and ready to run the test, wait for host to respond
+    2) Host sends the message to get the device current time i.e base time
+
+    #
+    # *
+    #   *                   |
+    #<---* DUT<- base_time  | - round_trip_base_time ------
+    #   *                   |                              |
+    # *                    -                               |
+    #                      -                               |
+    #                       |                              |
+    #                       |                              |
+    #                       | - measurement_stretch        | - nominal_time
+    #                       |                              |
+    #                       |                              |
+    #                      -                               |
+    # *                    -                               |
+    #   *                   |                              |
+    #<---* DUT <-final_time | - round_trip_final_time------
+    #   *                   |
+    # *                    -
+    #
+    #
+    # As we increase the measurement_stretch, the error because of transport delay diminishes.
+    # The values of measurement_stretch is propotional to round_trip_base_time(transport delays)
+    # by factor time_measurement_multiplier.This multiplier is used is 80 to tolerate 2 sec of
+    # transport delay and test time ~ 180 secs
+    #
+    # Failure in timing can occur if we are ticking too fast or we are ticking too slow, hence we have
+    # min_range and max_range. if we cross on either side tests would be marked fail. The range is a function of
+    # tolerance/acceptable drift currently its 5%.
+    #
+
+    """
+    __result = None
+    mega = 1000000.0
+    max_measurement_time = 180
+
+    # this value is obtained for measurements when there is 0 transport delay and we want accurancy of 5%
+    time_measurement_multiplier = 80
+
+    def _callback_timing_drift_check_start(self, key, value, timestamp):
+        self.round_trip_base_start = timestamp
+        self.send_kv("base_time", 0)
+
+    def _callback_base_time(self, key, value, timestamp):
+        self.round_trip_base_end = timestamp
+        self.device_time_base = float(value)
+        self.round_trip_base_time = self.round_trip_base_end - self.round_trip_base_start
+
+        self.log("Device base time {}".format(value))
+        measurement_stretch = (self.round_trip_base_time * self.time_measurement_multiplier) + 5
+
+        if measurement_stretch > self.max_measurement_time:
+            self.log("Time required {} to determine device timer is too high due to transport delay, skipping".format(measurement_stretch))
+        else:
+            self.log("sleeping for {} to measure drift accurately".format(measurement_stretch))
+            time.sleep(measurement_stretch)
+        self.round_trip_final_start = time.time()
+        self.send_kv("final_time", 0)
+
+    def _callback_final_time(self, key, value, timestamp):
+        self.round_trip_final_end = timestamp
+        self.device_time_final = float(value)
+        self.round_trip_final_time = self.round_trip_final_end - self.round_trip_final_start
+        self.log("Device final time {} ".format(value))
+
+        # compute the test results and send to device
+        results = "pass" if self.compute_parameter() else "fail"
+        self.send_kv(results, "0")
+
+    def setup(self):
+        self.register_callback('timing_drift_check_start', self._callback_timing_drift_check_start)
+        self.register_callback('base_time', self._callback_base_time)
+        self.register_callback('final_time', self._callback_final_time)
+
+    def compute_parameter(self, failure_criteria=0.05):
+        t_max = self.round_trip_final_end - self.round_trip_base_start
+        t_min = self.round_trip_final_start - self.round_trip_base_end
+        t_max_hi = t_max * (1 + failure_criteria)
+        t_max_lo = t_max * (1 - failure_criteria)
+        t_min_hi = t_min * (1 + failure_criteria)
+        t_min_lo = t_min * (1 - failure_criteria)
+        device_time = (self.device_time_final - self.device_time_base) / self.mega
+
+        self.log("Compute host events")
+        self.log("Transport delay 0: {}".format(self.round_trip_base_time))
+        self.log("Transport delay 1: {}".format(self.round_trip_final_time))
+        self.log("DUT base time : {}".format(self.device_time_base))
+        self.log("DUT end time  : {}".format(self.device_time_final))
+
+        self.log("min_pass : {} , max_pass : {} for {}%%".format(t_max_lo, t_min_hi, failure_criteria * 100))
+        self.log("min_inconclusive : {} , max_inconclusive : {}".format(t_min_lo, t_max_hi))
+        self.log("Time reported by device: {}".format(device_time))
+
+        if t_max_lo <= device_time <= t_min_hi:
+            self.log("Test passed !!!")
+            self.__result = True
+        elif t_min_lo <= device_time <= t_max_hi:
+            self.log("Test inconclusive due to transport delay, retrying")
+            self.__result = False
+        else:
+            self.log("Time outside of passing range. Timing drift seems to be present !!!")
+            self.__result = False
+        return self.__result
+
+    def result(self):
+        return self.__result
+
+    def teardown(self):
+        pass