mirror of https://github.com/ARMmbed/mbed-os.git
Autogenerated file using 'python targets/TARGET_STM/tools/STM32_gen_PeripheralPins.py -t M40_Nucleo_NUCLEO-G431KB'. Had to do some modifications since the autogenerated files contained errors.
Tauno Magnusson
parent
f871eff405
commit
fa0474239b
|
|
@ -1,32 +1,19 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
******************************************************************************
|
||||
*
|
||||
* Automatically generated from STM32CubeMX/db/mcu/STM32G431K(6-8-B)Tx.xml
|
||||
* Some errors in autogenerated file fixed by taunomagnusson@gmail.com
|
||||
*/
|
||||
|
||||
#include "PeripheralPins.h"
|
||||
|
|
@ -107,16 +94,18 @@ MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
|
|||
|
||||
//*** PWM ***
|
||||
|
||||
// TIM2 cannot be used because already used by the us_ticker
|
||||
// (update us_ticker_data.h file if another timer is chosen)
|
||||
MBED_WEAK const PinMap PinMap_PWM[] = {
|
||||
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PA_1_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_RX
|
||||
// {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 // Connected to STDIO_UART_RX
|
||||
// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_TX
|
||||
// {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 // Connected to STDIO_UART_TX
|
||||
{PA_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PA_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
|
|
@ -125,9 +114,9 @@ MBED_WEAK const PinMap PinMap_PWM[] = {
|
|||
{PA_7_ALT2, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_9_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_10_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
|
||||
// {PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_11_ALT0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PA_11_ALT1, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1
|
||||
|
|
@ -137,13 +126,13 @@ MBED_WEAK const PinMap PinMap_PWM[] = {
|
|||
{PA_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3 // Connected to T_SWDIO
|
||||
{PA_13_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N // Connected to T_SWDIO
|
||||
{PA_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2 // Connected to T_SWCLK
|
||||
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_15_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1
|
||||
// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1
|
||||
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PB_0_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 // Connected to T_SWO
|
||||
{PB_3_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N // Connected to T_SWO
|
||||
// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 // Connected to T_SWO
|
||||
{PB_3, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N // Connected to T_SWO
|
||||
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_4_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_4_ALT1, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
|
||||
|
|
@ -166,35 +155,35 @@ MBED_WEAK const PinMap PinMap_PWM[] = {
|
|||
//*** SERIAL ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX
|
||||
{PA_2_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_LPUART1)}, // Connected to STDIO_UART_TX
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to T_SWCLK
|
||||
{PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to T_SWO
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX
|
||||
{PA_2_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_LPUART1)}, // Connected to STDIO_UART_TX
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to T_SWCLK
|
||||
{PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to T_SWO
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
|
||||
{PA_3_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_LPUART1)}, // Connected to STDIO_UART_RX
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
|
||||
{PA_3_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_LPUART1)}, // Connected to STDIO_UART_RX
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_6, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_LPUART1)},
|
||||
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_LPUART1)},
|
||||
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -1,32 +1,18 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
******************************************************************************
|
||||
*
|
||||
* Automatically generated from STM32CubeMX/db/mcu/STM32G431K(6-8-B)Tx.xml
|
||||
*/
|
||||
|
||||
#ifndef MBED_PINNAMES_H
|
||||
|
|
@ -43,77 +29,75 @@ typedef enum {
|
|||
ALT0 = 0x100,
|
||||
ALT1 = 0x200,
|
||||
ALT2 = 0x300,
|
||||
ALT3 = 0x400
|
||||
ALT3 = 0x400,
|
||||
ALT4 = 0x500
|
||||
} ALTx;
|
||||
|
||||
typedef enum {
|
||||
|
||||
PA_0 = 0x00,
|
||||
PA_0_ALT0 = PA_0 | ALT0,
|
||||
PA_1 = 0x01,
|
||||
PA_1_ALT0 = PA_1 | ALT0,
|
||||
PA_2 = 0x02,
|
||||
PA_2_ALT0 = PA_2 | ALT0,
|
||||
PA_3 = 0x03,
|
||||
PA_3_ALT0 = PA_3 | ALT0,
|
||||
PA_4 = 0x04,
|
||||
PA_4_ALT0 = PA_4 | ALT0,
|
||||
PA_5 = 0x05,
|
||||
PA_6 = 0x06,
|
||||
PA_6_ALT0 = PA_6 | ALT0,
|
||||
PA_7 = 0x07,
|
||||
PA_7_ALT0 = PA_7 | ALT0,
|
||||
PA_7_ALT1 = PA_7 | ALT1,
|
||||
PA_7_ALT2 = PA_7 | ALT2,
|
||||
PA_8 = 0x08,
|
||||
PA_9 = 0x09,
|
||||
PA_9_ALT0 = PA_9 | ALT0,
|
||||
PA_10 = 0x0A,
|
||||
PA_10_ALT0 = PA_10 | ALT0,
|
||||
PA_11 = 0x0B,
|
||||
PA_11_ALT0 = PA_11 | ALT0,
|
||||
PA_11_ALT1 = PA_11 | ALT1,
|
||||
PA_12 = 0x0C,
|
||||
PA_12_ALT0 = PA_12 | ALT0,
|
||||
PA_12_ALT1 = PA_12 | ALT1,
|
||||
PA_13 = 0x0D,
|
||||
PA_13_ALT0 = PA_13 | ALT0,
|
||||
PA_14 = 0x0E,
|
||||
PA_15 = 0x0F,
|
||||
PA_15_ALT0 = PA_15 | ALT0,
|
||||
PA_0 = 0x00,
|
||||
PA_0_ALT0 = PA_0 | ALT0, // same pin used for alternate HW
|
||||
PA_1 = 0x01,
|
||||
PA_1_ALT0 = PA_1 | ALT0, // same pin used for alternate HW
|
||||
PA_2 = 0x02,
|
||||
PA_2_ALT0 = PA_2 | ALT0, // same pin used for alternate HW
|
||||
PA_3 = 0x03,
|
||||
PA_3_ALT0 = PA_3 | ALT0, // same pin used for alternate HW
|
||||
PA_4 = 0x04,
|
||||
PA_4_ALT0 = PA_4 | ALT0, // same pin used for alternate HW
|
||||
PA_5 = 0x05,
|
||||
PA_6 = 0x06,
|
||||
PA_6_ALT0 = PA_6 | ALT0, // same pin used for alternate HW
|
||||
PA_7 = 0x07,
|
||||
PA_7_ALT0 = PA_7 | ALT0, // same pin used for alternate HW
|
||||
PA_7_ALT1 = PA_7 | ALT1, // same pin used for alternate HW
|
||||
PA_7_ALT2 = PA_7 | ALT2, // same pin used for alternate HW
|
||||
PA_8 = 0x08,
|
||||
PA_9 = 0x09,
|
||||
PA_10 = 0x0A,
|
||||
PA_11 = 0x0B,
|
||||
PA_11_ALT0 = PA_11 | ALT0, // same pin used for alternate HW
|
||||
PA_11_ALT1 = PA_11 | ALT1, // same pin used for alternate HW
|
||||
PA_12 = 0x0C,
|
||||
PA_12_ALT0 = PA_12 | ALT0, // same pin used for alternate HW
|
||||
PA_12_ALT1 = PA_12 | ALT1, // same pin used for alternate HW
|
||||
PA_13 = 0x0D,
|
||||
PA_13_ALT0 = PA_13 | ALT0, // same pin used for alternate HW
|
||||
PA_14 = 0x0E,
|
||||
PA_15 = 0x0F,
|
||||
PA_15_ALT0 = PA_15 | ALT0, // same pin used for alternate HW
|
||||
PB_0 = 0x10,
|
||||
PB_0_ALT0 = PB_0 | ALT0, // same pin used for alternate HW
|
||||
PB_0_ALT1 = PB_0 | ALT1, // same pin used for alternate HW
|
||||
PB_3 = 0x13,
|
||||
PB_3_ALT0 = PB_3 | ALT0, // same pin used for alternate HW
|
||||
PB_4 = 0x14,
|
||||
PB_4_ALT0 = PB_4 | ALT0, // same pin used for alternate HW
|
||||
PB_4_ALT1 = PB_4 | ALT1, // same pin used for alternate HW
|
||||
PB_5 = 0x15,
|
||||
PB_5_ALT0 = PB_5 | ALT0, // same pin used for alternate HW
|
||||
PB_5_ALT1 = PB_5 | ALT1, // same pin used for alternate HW
|
||||
PB_6 = 0x16,
|
||||
PB_6_ALT0 = PB_6 | ALT0, // same pin used for alternate HW
|
||||
PB_6_ALT1 = PB_6 | ALT1, // same pin used for alternate HW
|
||||
PB_7 = 0x17,
|
||||
PB_7_ALT0 = PB_7 | ALT0, // same pin used for alternate HW
|
||||
PB_7_ALT1 = PB_7 | ALT1, // same pin used for alternate HW
|
||||
PB_8 = 0x18,
|
||||
PB_8_ALT0 = PB_8 | ALT0, // same pin used for alternate HW
|
||||
PB_8_ALT1 = PB_8 | ALT1, // same pin used for alternate HW
|
||||
PF_0 = 0x50,
|
||||
PF_1 = 0x51,
|
||||
PG_10 = 0x6A,
|
||||
|
||||
PB_0 = 0x10,
|
||||
PB_0_ALT0 = PB_0 | ALT0,
|
||||
PB_0_ALT1 = PB_0 | ALT1,
|
||||
PB_3 = 0x13,
|
||||
PB_3_ALT0 = PB_0 | ALT0,
|
||||
PB_4 = 0x14,
|
||||
PB_4_ALT0 = PB_4 | ALT0,
|
||||
PB_4_ALT1 = PB_4 | ALT1,
|
||||
PB_5 = 0x15,
|
||||
PB_5_ALT0 = PB_5 | ALT0,
|
||||
PB_5_ALT1 = PB_5 | ALT1,
|
||||
PB_6 = 0x16,
|
||||
PB_6_ALT0 = PB_6 | ALT0,
|
||||
PB_6_ALT1 = PB_6 | ALT1,
|
||||
PB_7 = 0x17,
|
||||
PB_7_ALT0 = PB_7 | ALT0,
|
||||
PB_7_ALT1 = PB_7 | ALT1,
|
||||
PB_8 = 0x18,
|
||||
PB_8_ALT0 = PB_8 | ALT0,
|
||||
PB_8_ALT1 = PB_8 | ALT1,
|
||||
/**** ADC internal channels ****/
|
||||
|
||||
PF_0 = 0x50,
|
||||
PF_1 = 0x51,
|
||||
ADC_TEMP = 0xF0, // Internal pin virtual value
|
||||
ADC_VREF = 0xF1, // Internal pin virtual value
|
||||
ADC_VBAT = 0xF2, // Internal pin virtual value
|
||||
|
||||
PG_10 = 0x6A, // WARNING - Not documented in STM32 Ref Guides. Inferred from above.
|
||||
|
||||
// ADC internal channels (Tauno WARNING: Not Verified)
|
||||
ADC_TEMP = 0xF0,
|
||||
ADC_VREF = 0xF1,
|
||||
ADC_VBAT = 0xF2,
|
||||
|
||||
// Arduino connector namings
|
||||
// Arduino Uno(Rev3) Header pin connection naming
|
||||
// Not autogenerated - manually added
|
||||
A0 = PA_0,
|
||||
A1 = PA_1,
|
||||
A2 = PA_3,
|
||||
|
|
@ -137,12 +121,11 @@ typedef enum {
|
|||
D11 = PB_5,
|
||||
D12 = PB_4,
|
||||
D13 = PB_3, // or PB_8 according to NUCLEO_G431KB manual
|
||||
D14 = PB_4, // Tauno WARNING: Dummy adds (There is no D14,15 on 431KB)
|
||||
D15 = PB_3, // Tauno WARNING: Without these 2 dummies compile fails. Remove to see error.
|
||||
|
||||
/*** Board LED ***/
|
||||
D14 = PB_4, // WARNING: Dummy adds (There is no D14,D15 on 431KB)
|
||||
D15 = PB_3, // WARNING: However, without these 2 dummies compilation fails. Remove to see error.
|
||||
|
||||
// STDIO for console print
|
||||
// Error in autogenerated file (TX is autogenerated as PA_3, RX as PA_2, which is wrong (mirrored))
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
|
||||
STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
|
||||
#else
|
||||
|
|
@ -154,42 +137,36 @@ typedef enum {
|
|||
STDIO_UART_RX = PA_3,
|
||||
#endif
|
||||
|
||||
// Generic signals namings
|
||||
LED1 = PB_8,
|
||||
SERIAL_TX = STDIO_UART_TX,
|
||||
SERIAL_RX = STDIO_UART_RX,
|
||||
USBTX = STDIO_UART_TX,
|
||||
USBRX = STDIO_UART_RX,
|
||||
I2C_SCL = PA_15, // I2C2
|
||||
I2C_SDA = PB_7, // I2C2
|
||||
SPI_MOSI = PB_5, // SPI3. Note: In UM2397 it's SPI1, in CubeIDE SPI3
|
||||
SPI_MISO = PB_4, // SPI3. Note: In UM2397 it's SPI1, in CubeIDE SPI3
|
||||
SPI_SCK = PB_3, // SPI3. Note: In UM2397 it's SPI1, in CubeIDE SPI3
|
||||
SPI_CS = PA_11, // UM2397 (PA_11 - SPI_CS handled by GPIO). In CubeIDE PA_15.
|
||||
PWM_OUT = PB_6,
|
||||
USBTX = STDIO_UART_TX, // used for greentea tests
|
||||
USBRX = STDIO_UART_RX, // used for greentea tests
|
||||
|
||||
// I2C signals aliases
|
||||
// Error in autogenerated file. D14,D15 does not exist on 431KB
|
||||
I2C_SDA = PB_7,
|
||||
I2C_SCL = PA_15,
|
||||
|
||||
// SPI signals aliases
|
||||
SPI_CS = D10,
|
||||
SPI_MOSI = D11,
|
||||
SPI_MISO = D12,
|
||||
SPI_SCK = D13,
|
||||
|
||||
// Standardized LED and button names
|
||||
LED1 = PB_8, // LD2 [green]
|
||||
// BUTTON1 = Px_x,
|
||||
|
||||
// Backward legacy names
|
||||
// USER_BUTTON = BUTTON1,
|
||||
PWM_OUT = D3,
|
||||
|
||||
/**** USB pins ****/
|
||||
USB_DM = PA_11,
|
||||
USB_DP = PA_12,
|
||||
USB_DM = PA_11,
|
||||
USB_DP = PA_12,
|
||||
|
||||
/**** OSCILLATOR pins ****/
|
||||
RCC_OSC_IN = PF_0,
|
||||
RCC_OSC_IN = PF_0,
|
||||
RCC_OSC_OUT = PF_1,
|
||||
|
||||
/**** Miscellaneous pins ****/
|
||||
USART1_TX = PA_9,
|
||||
USART1_RX = PA_10,
|
||||
|
||||
ADC1_IN3 = PA_2,
|
||||
ADC1_IN4 = PA_3,
|
||||
ADC2_IN1 = PA_0,
|
||||
ADC2_IN2 = PA_1,
|
||||
ADC2_IN3 = PA_6,
|
||||
ADC2_IN4 = PA_7,
|
||||
ADC2_IN13 = PA_5,
|
||||
ADC2_IN17 = PA_4,
|
||||
|
||||
|
||||
/**** DEBUG pins ****/
|
||||
SYS_JTCK_SWCLK = PA_14,
|
||||
SYS_JTDI = PA_15,
|
||||
|
|
@ -197,7 +174,8 @@ typedef enum {
|
|||
SYS_JTMS_SWDIO = PA_13,
|
||||
SYS_JTRST = PB_4,
|
||||
SYS_PVD_IN = PB_7,
|
||||
SYS_WKUP1 = PA_0,
|
||||
SYS_WKUP1 = PA_0,
|
||||
SYS_WKUP4 = PA_2,
|
||||
|
||||
// Not connected
|
||||
NC = (int)0xFFFFFFFF
|
||||
|
|
|
|||
Loading…
Reference in New Issue