mirror of https://github.com/ARMmbed/mbed-os.git
Updated pinmap to fix CAN and enable UART hardware flow control
Cesar
parent
c10907288d
commit
f91bba9803
223
targets/TARGET_STM/TARGET_STM32F1/TARGET_BLUEPILL_F103C8/PeripheralPins.c
Normal file → Executable file
223
targets/TARGET_STM/TARGET_STM32F1/TARGET_BLUEPILL_F103C8/PeripheralPins.c
Normal file → Executable file
|
|
@ -1,6 +1,6 @@
|
||||||
/* mbed Microcontroller Library
|
/* mbed Microcontroller Library
|
||||||
*******************************************************************************
|
*******************************************************************************
|
||||||
* Copyright (c) 2014, STMicroelectronics
|
* Copyright (c) 2018, STMicroelectronics
|
||||||
* All rights reserved.
|
* All rights reserved.
|
||||||
*
|
*
|
||||||
* Redistribution and use in source and binary forms, with or without
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
|
@ -26,19 +26,35 @@
|
||||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
*******************************************************************************
|
*******************************************************************************
|
||||||
|
*
|
||||||
|
* Automatically generated from STM32F103C(8-B)Tx.xml
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include "PeripheralPins.h"
|
#include "PeripheralPins.h"
|
||||||
|
#include "mbed_toolchain.h"
|
||||||
|
|
||||||
|
//==============================================================================
|
||||||
|
// Notes
|
||||||
|
//
|
||||||
|
// - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||||
|
// HW peripheral instances. You can use them the same way as any other "normal"
|
||||||
|
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
|
||||||
|
// pinout image on mbed.org.
|
||||||
|
//
|
||||||
|
// - The pins which are connected to other components present on the board have
|
||||||
|
// the comment "Connected to xxx". The pin function may not work properly in this
|
||||||
|
// case. These pins may not be displayed on the board pinout image on mbed.org.
|
||||||
|
// Please read the board reference manual and schematic for more information.
|
||||||
|
//
|
||||||
|
// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
|
||||||
|
// See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
|
||||||
|
//
|
||||||
|
//==============================================================================
|
||||||
|
|
||||||
// =====
|
|
||||||
// Note: Commented lines are alternative possibilities which are not used per default.
|
|
||||||
// If you change them, you will have also to modify the corresponding xxx_api.c file
|
|
||||||
// for pwmout, analogin, analogout, ...
|
|
||||||
// =====
|
|
||||||
|
|
||||||
//*** ADC ***
|
//*** ADC ***
|
||||||
|
|
||||||
const PinMap PinMap_ADC[] = {
|
MBED_WEAK const PinMap PinMap_ADC[] = {
|
||||||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
|
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
|
||||||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
|
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
|
||||||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
|
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
|
||||||
|
|
@ -55,7 +71,7 @@ const PinMap PinMap_ADC[] = {
|
||||||
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13
|
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13
|
||||||
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14
|
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14
|
||||||
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15
|
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_ADC_Internal[] = {
|
const PinMap PinMap_ADC_Internal[] = {
|
||||||
|
|
@ -66,118 +82,135 @@ const PinMap PinMap_ADC_Internal[] = {
|
||||||
|
|
||||||
//*** I2C ***
|
//*** I2C ***
|
||||||
|
|
||||||
const PinMap PinMap_I2C_SDA[] = {
|
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||||
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)},
|
||||||
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_I2C_SCL[] = {
|
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||||
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)},
|
||||||
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
//*** PWM ***
|
//*** PWM ***
|
||||||
|
|
||||||
// TIM4 cannot be used because already used by the us_ticker
|
// TIM4 cannot be used because already used by the us_ticker
|
||||||
const PinMap PinMap_PWM[] = {
|
// You have to comment all PWM_4
|
||||||
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM2_CH2 - Default
|
MBED_WEAK const PinMap PinMap_PWM[] = {
|
||||||
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM2_CH3 - Default (warning: not connected on D1 per default)
|
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM2_CH1
|
||||||
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM2_CH4 - Default (warning: not connected on D0 per default)
|
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM2_CH2
|
||||||
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM3_CH1 - Default
|
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM2_CH3
|
||||||
{PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM3_CH2 - Default
|
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM2_CH4
|
||||||
// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 1, 1)}, // TIM1_CH1N - GPIO_PartialRemap_TIM1
|
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM3_CH1
|
||||||
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM1_CH1 - Default
|
{PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM3_CH2
|
||||||
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM1_CH2 - Default
|
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM1_CH1
|
||||||
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM1_CH3 - Default
|
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 1, 0)}, // TIM1_CH1
|
||||||
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM1_CH4 - Default
|
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM1_CH2
|
||||||
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 1, 0)}, // TIM2_CH1_ETR - GPIO_FullRemap_TIM2
|
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 2, 0)}, // TIM1_CH2
|
||||||
|
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM1_CH3
|
||||||
{PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM3_CH3 - Default
|
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 3, 0)}, // TIM1_CH3
|
||||||
// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 2, 1)}, // TIM1_CH2N - GPIO_PartialRemap_TIM1
|
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM1_CH4
|
||||||
{PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM3_CH4 - Default
|
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 4, 0)}, // TIM1_CH4
|
||||||
// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 3, 1)}, // TIM1_CH3N - GPIO_PartialRemap_TIM1
|
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 1, 0)}, // TIM2_CH1
|
||||||
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 2, 0)}, // TIM2_CH2 - GPIO_FullRemap_TIM2
|
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 2, 1)}, // TIM1_CH2N
|
||||||
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 1, 0)}, // TIM3_CH1 - GPIO_PartialRemap_TIM3
|
{PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM3_CH3
|
||||||
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 2, 0)}, // TIM3_CH2 - GPIO_PartialRemap_TIM3
|
{PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 3, 0)}, // TIM3_CH3
|
||||||
// {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM4_CH1 - Default (used by ticker)
|
{PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 3, 1)}, // TIM1_CH3N
|
||||||
// {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM4_CH2 - Default (used by ticker)
|
{PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM3_CH4
|
||||||
// {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM4_CH3 - Default (used by ticker)
|
{PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 4, 0)}, // TIM3_CH4
|
||||||
// {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM4_CH4 - Default (used by ticker)
|
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 2, 0)}, // TIM2_CH2
|
||||||
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 3, 0)}, // TIM2_CH3 - GPIO_FullRemap_TIM2
|
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 1, 0)}, // TIM3_CH1
|
||||||
{PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 4, 0)}, // TIM2_CH4 - GPIO_FullRemap_TIM2
|
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 2, 0)}, // TIM3_CH2
|
||||||
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 1)}, // TIM1_CH1N - Default
|
// {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM4_CH1
|
||||||
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 1)}, // TIM1_CH2N - Default
|
// {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM4_CH2
|
||||||
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 1)}, // TIM1_CH3N - Default
|
// {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM4_CH3
|
||||||
|
// {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM4_CH4
|
||||||
{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 1, 0)}, // TIM3_CH1 - GPIO_FullRemap_TIM3
|
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 3, 0)}, // TIM2_CH3
|
||||||
{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 2, 0)}, // TIM3_CH2 - GPIO_FullRemap_TIM3
|
{PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 4, 0)}, // TIM2_CH4
|
||||||
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 3, 0)}, // TIM3_CH3 - GPIO_FullRemap_TIM3
|
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 1)}, // TIM1_CH1N
|
||||||
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 4, 0)}, // TIM3_CH4 - GPIO_FullRemap_TIM3
|
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 1)}, // TIM1_CH2N
|
||||||
{NC, NC, 0}
|
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 1)}, // TIM1_CH3N
|
||||||
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
//*** SERIAL ***
|
//*** SERIAL ***
|
||||||
|
|
||||||
const PinMap PinMap_UART_TX[] = {
|
MBED_WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||||
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_UART_RX[] = {
|
MBED_WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||||
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||||
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
|
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
|
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
|
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
|
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||||
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
//*** SPI ***
|
//*** SPI ***
|
||||||
|
|
||||||
const PinMap PinMap_SPI_MOSI[] = {
|
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)},
|
||||||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_SPI_MISO[] = {
|
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)},
|
||||||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_SPI_SCLK[] = {
|
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)},
|
||||||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_SPI_SSEL[] = {
|
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)},
|
||||||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_CAN_RD[] = {
|
//*** CAN ***
|
||||||
{PA_11, CAN_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)},
|
|
||||||
{PB_8, CAN_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 1)},
|
MBED_WEAK const PinMap PinMap_CAN_RD[] = {
|
||||||
{NC, NC, 0}
|
{PA_11, CAN_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)},
|
||||||
|
{PB_8, CAN_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 10)},
|
||||||
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
||||||
const PinMap PinMap_CAN_TD[] = {
|
MBED_WEAK const PinMap PinMap_CAN_TD[] = {
|
||||||
{PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
{PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||||
{PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)},
|
{PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 10)},
|
||||||
{NC, NC, 0}
|
{NC, NC, 0}
|
||||||
};
|
};
|
||||||
|
|
|
||||||
10
targets/TARGET_STM/TARGET_STM32F1/TARGET_BLUEPILL_F103C8/PinNames.h
Normal file → Executable file
10
targets/TARGET_STM/TARGET_STM32F1/TARGET_BLUEPILL_F103C8/PinNames.h
Normal file → Executable file
|
|
@ -37,6 +37,13 @@
|
||||||
extern "C" {
|
extern "C" {
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
ALT0 = 0x100,
|
||||||
|
ALT1 = 0x200,
|
||||||
|
ALT2 = 0x300,
|
||||||
|
ALT3 = 0x400
|
||||||
|
} ALTx;
|
||||||
|
|
||||||
typedef enum {
|
typedef enum {
|
||||||
PA_0 = 0x00,
|
PA_0 = 0x00,
|
||||||
PA_1 = 0x01,
|
PA_1 = 0x01,
|
||||||
|
|
@ -46,6 +53,7 @@ typedef enum {
|
||||||
PA_5 = 0x05,
|
PA_5 = 0x05,
|
||||||
PA_6 = 0x06,
|
PA_6 = 0x06,
|
||||||
PA_7 = 0x07,
|
PA_7 = 0x07,
|
||||||
|
PA_7_ALT0 = 0x07 | ALT0,
|
||||||
PA_8 = 0x08,
|
PA_8 = 0x08,
|
||||||
PA_9 = 0x09,
|
PA_9 = 0x09,
|
||||||
PA_10 = 0x0A,
|
PA_10 = 0x0A,
|
||||||
|
|
@ -56,7 +64,9 @@ typedef enum {
|
||||||
PA_15 = 0x0F,
|
PA_15 = 0x0F,
|
||||||
|
|
||||||
PB_0 = 0x10,
|
PB_0 = 0x10,
|
||||||
|
PB_0_ALT0 = 0x10 | ALT0,
|
||||||
PB_1 = 0x11,
|
PB_1 = 0x11,
|
||||||
|
PB_1_ALT0 = 0x11 | ALT0,
|
||||||
PB_2 = 0x12,
|
PB_2 = 0x12,
|
||||||
PB_3 = 0x13,
|
PB_3 = 0x13,
|
||||||
PB_4 = 0x14,
|
PB_4 = 0x14,
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue