From f79b8285e44d24529960358923cb5cd43f8fcef3 Mon Sep 17 00:00:00 2001 From: JohnK1987 Date: Wed, 7 Sep 2022 23:52:06 +0200 Subject: [PATCH] Add Cmake config for Nucleo-F767ZI into upload methods --- targets/upload_method_cfg/NUCLEO_F767ZI.cmake | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 targets/upload_method_cfg/NUCLEO_F767ZI.cmake diff --git a/targets/upload_method_cfg/NUCLEO_F767ZI.cmake b/targets/upload_method_cfg/NUCLEO_F767ZI.cmake new file mode 100644 index 0000000000..efab4117f2 --- /dev/null +++ b/targets/upload_method_cfg/NUCLEO_F767ZI.cmake @@ -0,0 +1,51 @@ +# Mbed OS upload method configuration file for target NUCLEO_F767ZI. +# To change any of these parameters from their default values, set them in your build script between where you +# include app.cmake and where you add mbed os as a subdirectory. + +# Notes: +# 1. Using the JLINK upload method with your dev board requires converting its ST-LINK into a J-Link. See here for details: https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/ + +# General config parameters +# ------------------------------------------------------------- +set(UPLOAD_METHOD_DEFAULT MBED) + +# Config options for MBED +# ------------------------------------------------------------- + +set(MBED_UPLOAD_ENABLED TRUE) +set(MBED_RESET_BAUDRATE 115200) + +# Config options for JLINK - not tested! +# ------------------------------------------------------------- + +set(JLINK_UPLOAD_ENABLED FALSE) +set(JLINK_CPU_NAME STM32F767ZI) +set(JLINK_CLOCK_SPEED 4000) +set(JLINK_UPLOAD_INTERFACE SWD) + +# Config options for PYOCD +# ------------------------------------------------------------- + +set(PYOCD_UPLOAD_ENABLED TRUE) +set(PYOCD_TARGET_NAME stm32f767zi) +set(PYOCD_CLOCK_SPEED 4000k) + +# Config options for OPENOCD +# ------------------------------------------------------------- + +set(OPENOCD_UPLOAD_ENABLED TRUE) +set(OPENOCD_CHIP_CONFIG_COMMANDS + -f ${OpenOCD_SCRIPT_DIR}/board/st_nucleo_f7.cfg) + +# Config options for STM32Cube +# ------------------------------------------------------------- + +set(STM32CUBE_UPLOAD_ENABLED TRUE) +set(STM32CUBE_CONNECT_COMMAND -c port=SWD reset=HWrst) +set(STM32CUBE_GDBSERVER_ARGS --swd) + +# Config options for stlink +# ------------------------------------------------------------- + +set(STLINK_UPLOAD_ENABLED TRUE) +set(STLINK_LOAD_ADDRESS 0x8000000)