Cellular: Move device_ready from power to device

UNITTESTS/features/cellular/framework/AT/at_cellulardevice/at_cellulardevicetest.cpp

@@ -232,6 +232,17 @@ TEST_F(TestAT_CellularDevice, test_AT_CellularDevice_modem_debug_on)
     dev.close_sms();
 }
 
+TEST_F(TestAT_CellularDevice, test_AT_CellularDevice_is_ready)
+{
+    EventQueue que;
+    FileHandle_stub fh1;
+    ATHandler at(&fh1, que, 0, ",");
+
+    AT_CellularDevice dev(&fh1);
+    ATHandler_stub::nsapi_error_value = NSAPI_ERROR_OK;
+    EXPECT_TRUE(NSAPI_ERROR_OK == dev.is_ready());
+}
+
 TEST_F(TestAT_CellularDevice, test_AT_CellularDevice_set_power_save_mode)
 {
     EventQueue que;

UNITTESTS/features/cellular/framework/AT/at_cellularpower/at_cellularpowertest.cpp

@@ -123,17 +123,6 @@ TEST_F(TestAT_CellularPower, test_AT_CellularPower_reset)
     EXPECT_TRUE(NSAPI_ERROR_DEVICE_ERROR == pow.reset());
 }
 
-TEST_F(TestAT_CellularPower, test_AT_CellularPower_is_device_ready)
-{
-    EventQueue que;
-    FileHandle_stub fh1;
-    ATHandler at(&fh1, que, 0, ",");
-
-    AT_CellularPower pow(at);
-    ATHandler_stub::nsapi_error_value = NSAPI_ERROR_AUTH_FAILURE;
-    EXPECT_TRUE(NSAPI_ERROR_AUTH_FAILURE == pow.is_device_ready());
-}
-
 TEST_F(TestAT_CellularPower, test_AT_CellularPower_set_device_ready_urc_cb)
 {
     EventQueue que;

UNITTESTS/stubs/AT_CellularDevice_stub.cpp

@@ -151,6 +151,11 @@ void AT_CellularDevice::modem_debug_on(bool on)
 
 }
 
+nsapi_error_t AT_CellularDevice::is_ready()
+{
+    return NSAPI_ERROR_OK;
+}
+
 nsapi_error_t AT_CellularDevice::set_power_save_mode(int periodic_time, int active_time)
 {
     return NSAPI_ERROR_OK;

UNITTESTS/stubs/AT_CellularPower_stub.cpp

@@ -64,8 +64,3 @@ void AT_CellularPower::remove_device_ready_urc_cb(mbed::Callback<void()> callbac
 {
 
 }
-
-nsapi_error_t AT_CellularPower::is_device_ready()
-{
-    return NSAPI_ERROR_OK;
-}

UNITTESTS/target_h/myCellularDevice.h

@@ -109,6 +109,11 @@ public:
 
     virtual void modem_debug_on(bool on) {}
 
+    virtual nsapi_error_t is_ready()
+    {
+        return NSAPI_ERROR_OK;
+    }
+
     nsapi_error_t set_power_save_mode(int periodic_time, int active_time)
     {
         return NSAPI_ERROR_OK;

features/cellular/TESTS/api/cellular_power/main.cpp

@@ -64,7 +64,7 @@ static void wait_for_power(CellularPower *pwr)
         err = pwr->set_at_mode();
     }
 
-    TEST_ASSERT(pwr->is_device_ready() == NSAPI_ERROR_OK);
+    TEST_ASSERT(cellular_device->is_ready() == NSAPI_ERROR_OK);
 
     pwr->remove_device_ready_urc_cb(&urc_callback);
 }

features/cellular/framework/API/CellularDevice.h

@@ -250,6 +250,13 @@ public:
      */
     virtual void modem_debug_on(bool on) = 0;
 
+    /** Check whether the device is ready to accept commands.
+     *
+     *  @return         NSAPI_ERROR_OK on success
+     *                  NSAPI_ERROR_DEVICE_ERROR on failure
+     */
+    virtual nsapi_error_t is_ready() = 0;
+
     /** Set power save mode
      *
      *  @remark See 3GPP TS 27.007 PSM for details

features/cellular/framework/API/CellularPower.h

@@ -93,13 +93,6 @@ public:
      */
     virtual nsapi_error_t reset() = 0;
 
-    /** Check whether the device is ready to accept commands.
-     *
-     *  @return         NSAPI_ERROR_OK on success
-     *                  NSAPI_ERROR_DEVICE_ERROR on failure
-     */
-    virtual nsapi_error_t is_device_ready() = 0;
-
     /** Set URC callback function for device specific ready urc. URC is defined in device specific
      *  power API. Used in startup sequence to listen when device is ready
      *  for using at commands and possible sim.

features/cellular/framework/AT/AT_CellularDevice.cpp

@@ -366,6 +366,21 @@ void AT_CellularDevice::modem_debug_on(bool on)
     ATHandler::set_debug_list(_modem_debug_on);
 }
 
+nsapi_error_t AT_CellularDevice::is_ready()
+{
+    _at->lock();
+    _at->cmd_start("AT");
+    _at->cmd_stop_read_resp();
+
+    // we need to do this twice because for example after data mode the first 'AT' command will give modem a
+    // stimulus that we are back to command mode.
+    _at->clear_error();
+    _at->cmd_start("AT");
+    _at->cmd_stop_read_resp();
+
+    return _at->unlock_return_error();
+}
+
 nsapi_error_t AT_CellularDevice::set_power_save_mode(int periodic_time, int active_time)
 {
     _at->lock();

features/cellular/framework/AT/AT_CellularDevice.h

@@ -70,6 +70,8 @@ public:
 
     virtual void modem_debug_on(bool on);
 
+    virtual nsapi_error_t is_ready();
+
     virtual nsapi_error_t set_power_save_mode(int periodic_time, int active_time = 0);
 
     virtual nsapi_error_t init_module();

features/cellular/framework/AT/AT_CellularPower.cpp

@@ -74,21 +74,6 @@ nsapi_error_t AT_CellularPower::reset()
     return _at.unlock_return_error();
 }
 
-nsapi_error_t AT_CellularPower::is_device_ready()
-{
-    _at.lock();
-    _at.cmd_start("AT");
-    _at.cmd_stop_read_resp();
-
-    // we need to do this twice because for example after data mode the first 'AT' command will give modem a
-    // stimulus that we are back to command mode.
-    _at.clear_error();
-    _at.cmd_start("AT");
-    _at.cmd_stop_read_resp();
-
-    return _at.unlock_return_error();
-}
-
 nsapi_error_t AT_CellularPower::set_device_ready_urc_cb(mbed::Callback<void()> callback)
 {
     return NSAPI_ERROR_UNSUPPORTED;

features/cellular/framework/AT/AT_CellularPower.h

@@ -44,8 +44,6 @@ public:
 
     virtual nsapi_error_t reset();
 
-    virtual nsapi_error_t is_device_ready();
-
     virtual nsapi_error_t set_device_ready_urc_cb(mbed::Callback<void()> callback);
 
     virtual void remove_device_ready_urc_cb(mbed::Callback<void()> callback);

features/cellular/framework/device/CellularStateMachine.cpp

@@ -339,7 +339,7 @@ void CellularStateMachine::state_init()
     if (!_power) {
         _power = _cellularDevice.open_power();
     }
-    _cb_data.error = _power->is_device_ready();
+    _cb_data.error = _cellularDevice.is_ready();
     if (_cb_data.error != NSAPI_ERROR_OK) {
         _event_timeout = _start_time;
         if (_start_time > 0) {