diff --git a/connectivity/drivers/ble/FEATURE_BLE/TARGET_STM32WB/STM32Cube_FW/shci.h b/connectivity/drivers/ble/FEATURE_BLE/TARGET_STM32WB/STM32Cube_FW/shci.h index 435a4e17a5..fc27b571dd 100644 --- a/connectivity/drivers/ble/FEATURE_BLE/TARGET_STM32WB/STM32Cube_FW/shci.h +++ b/connectivity/drivers/ble/FEATURE_BLE/TARGET_STM32WB/STM32Cube_FW/shci.h @@ -435,7 +435,7 @@ extern "C" { * PrWriteListSize * NOTE: This parameter is ignored by the CPU2 when the parameter "Options" is set to "LL_only" ( see Options description in that structure ) * - * Maximum number of supported “prepare write request” + * Maximum number of supported “prepare write request” * - Min value: given by the macro DEFAULT_PREP_WRITE_LIST_SIZE * - Max value: a value higher than the minimum required can be specified, but it is not recommended */ @@ -502,7 +502,7 @@ extern "C" { * MaxConnEventLength * This parameter determines the maximum duration of a slave connection event. When this duration is reached the slave closes * the current connections event (whatever is the CE_length parameter specified by the master in HCI_CREATE_CONNECTION HCI command), - * expressed in units of 625/256 µs (~2.44 µs) + * expressed in units of 625/256 µs (~2.44 µs) * - Min value: 0 (if 0 is specified, the master and slave perform only a single TX-RX exchange per connection event) * - Max value: 1638400 (4000 ms). A higher value can be specified (max 0xFFFFFFFF) but results in a maximum connection time * of 4000 ms as specified. In this case the parameter is not applied, and the predicted CE length calculated on slave is not shortened @@ -511,7 +511,7 @@ extern "C" { /** * HsStartupTime - * Startup time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 µs (~2.44 µs). + * Startup time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 µs (~2.44 µs). * - Min value: 0 * - Max value: 820 (~2 ms). A higher value can be specified, but the value that implemented in stack is forced to ~2 ms */