diff --git a/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/PinNames.h b/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/PinNames.h deleted file mode 100644 index 50bdb1bb57..0000000000 --- a/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/PinNames.h +++ /dev/null @@ -1,147 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_PINNAMES_H -#define MBED_PINNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef enum { - PIN_INPUT, - PIN_OUTPUT -} PinDirection; - -#define PORT_SHIFT 5 - -typedef enum { - // LPC Pin Names - P0_0 = LPC_GPIO0_BASE, - P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31, - P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31, - P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31, - P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31, - P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31, - - // mbed DIP Pin Names - p5 = P0_9, - p6 = P0_8, - p7 = P0_7, - p8 = P0_6, - p9 = P0_0, - p10 = P0_1, - p11 = P0_18, - p12 = P0_17, - p13 = P0_15, - p14 = P0_16, - p15 = P0_23, - p16 = P0_24, - p17 = P0_25, - p18 = P0_26, - p19 = P1_30, - p20 = P1_31, - p21 = P2_5, - p22 = P2_4, - p23 = P2_3, - p24 = P2_2, - p25 = P2_1, - p26 = P2_0, - p27 = P0_11, - p28 = P0_10, - p29 = P0_5, - p30 = P0_4, - - - LED1 = P1_18, - LED2 = P1_20, - LED3 = P1_21, - LED4 = P1_23, - - //For USB UART - //USBTX = P0_2, - //USBRX = P0_3, - - //xbed lpc1768 Pin Names - LED5 = P2_6, - BTN1 = P2_8, - // Standardized button names - BUTTON1 = BTN1, - SDA = P0_27, - SCL = P0_28, - ISP = P2_10, - CLK = P1_27, - USBTX = P2_0, //DIP26 - USBRX = P2_1, //DIP25 - - - // Arch Pro Pin Names - D0 = P4_29, - D1 = P4_28, - D2 = P0_4, - D3 = P0_5, - D4 = P2_2, - D5 = P2_3, - D6 = P2_4, - D7 = P2_5, - D8 = P0_0, - D9 = P0_1, - D10 = P0_6, - D11 = P0_9, - D12 = P0_8, - D13 = P0_7, - D14 = P0_27, - D15 = P0_28, - - A0 = P0_23, - A1 = P0_24, - A2 = P0_25, - A3 = P0_26, - A4 = P1_30, - A5 = P1_31, - - I2C_SCL = D15, - I2C_SDA = D14, - - // Not connected - NC = (int)0xFFFFFFFF -} PinName; - -typedef enum { - PullUp = 0, - PullDown = 3, - PullNone = 2, - Repeater = 1, - OpenDrain = 4, - PullDefault = PullDown -} PinMode; - -// version of PINCON_TypeDef using register arrays -typedef struct { - __IO uint32_t PINSEL[11]; - uint32_t RESERVED0[5]; - __IO uint32_t PINMODE[10]; - __IO uint32_t PINMODE_OD[5]; -} PINCONARRAY_TypeDef; - -#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE) - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/device.h b/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/device.h deleted file mode 100644 index 5d57c9de57..0000000000 --- a/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/device.h +++ /dev/null @@ -1,40 +0,0 @@ -// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches. -// Check the 'features' section of the target description in 'targets.json' for more details. -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - - - - - - - - - - - -#define DEVICE_ID_LENGTH 32 -#define DEVICE_MAC_OFFSET 20 - - - - - -#include "objects.h" - -#endif diff --git a/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/reserved_pins.h b/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/reserved_pins.h deleted file mode 100644 index b392cd2f21..0000000000 --- a/targets/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/reserved_pins.h +++ /dev/null @@ -1,8 +0,0 @@ -// List of reserved pins for MBED LPC1768 - -#ifndef RESERVED_PINS_H -#define RESERVED_PINS_H - -#define TARGET_RESERVED_PINS {} - -#endif diff --git a/targets/TARGET_NXP/TARGET_LPC176X/device/TOOLCHAIN_GCC_ARM/TARGET_XBED_LPC1768/XBED_LPC1768.ld b/targets/TARGET_NXP/TARGET_LPC176X/device/TOOLCHAIN_GCC_ARM/TARGET_XBED_LPC1768/XBED_LPC1768.ld deleted file mode 100644 index 8f86271fca..0000000000 --- a/targets/TARGET_NXP/TARGET_LPC176X/device/TOOLCHAIN_GCC_ARM/TARGET_XBED_LPC1768/XBED_LPC1768.ld +++ /dev/null @@ -1,179 +0,0 @@ -/* Linker script for mbed LPC1768 */ - -#if !defined(MBED_BOOT_STACK_SIZE) - #define MBED_BOOT_STACK_SIZE 0x400 -#endif - -STACK_SIZE = MBED_BOOT_STACK_SIZE; - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00002000, LENGTH = 504K - RAM (rwx) : ORIGIN = 0x100000C8, LENGTH = (32K - 0xC8 - 32) /* topmost 32 bytes used by IAP functions */ - - USB_RAM(rwx) : ORIGIN = 0x2007C000, LENGTH = 16K - ETH_RAM(rwx) : ORIGIN = 0x20080000, LENGTH = 16K -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - Image$$RW_IRAM1$$Base = .; - *(vtable) - *(.data*) - - . = ALIGN(8); - /* preinit data */ - PROVIDE (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE (__preinit_array_end = .); - - . = ALIGN(8); - /* init data */ - PROVIDE (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE (__init_array_end = .); - - - . = ALIGN(8); - /* finit data */ - PROVIDE (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE (__fini_array_end = .); - - . = ALIGN(8); - /* All data end */ - __data_end__ = .; - - } > RAM - - - .bss : - { - __bss_start__ = .; - *(.bss*) - *(COMMON) - __bss_end__ = .; - Image$$RW_IRAM1$$ZI$$Limit = . ; - } > RAM - - - .heap : - { - __end__ = .; - end = __end__; - *(.heap*) - . = ORIGIN(RAM) + LENGTH(RAM) - STACK_SIZE; - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy : - { - *(.stack) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - STACK_SIZE; - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") - - - /* Code can explicitly ask for data to be - placed in these higher RAM banks where - they will be left uninitialized. - */ - .AHBSRAM0 (NOLOAD): - { - Image$$RW_IRAM2$$Base = . ; - *(AHBSRAM0) - Image$$RW_IRAM2$$ZI$$Limit = .; - } > USB_RAM - - .AHBSRAM1 (NOLOAD): - { - Image$$RW_IRAM3$$Base = . ; - *(AHBSRAM1) - Image$$RW_IRAM3$$ZI$$Limit = .; - } > ETH_RAM -} diff --git a/targets/targets.json b/targets/targets.json index 4ab83fda79..ef48ff45c0 100644 --- a/targets/targets.json +++ b/targets/targets.json @@ -577,56 +577,6 @@ "1235" ] }, - "XBED_LPC1768": { - "inherits": [ - "LPCTarget" - ], - "core": "Cortex-M3", - "supported_toolchains": [ - "ARM", - "uARM", - "GCC_ARM", - "IAR" - ], - "extra_labels": [ - "NXP", - "LPC176X", - "XBED_LPC1768" - ], - "macros": [ - "TARGET_LPC1768" - ], - "detect_code": [ - "1010" - ], - "device_has": [ - "ANALOGIN", - "ANALOGOUT", - "CAN", - "DEBUG_AWARENESS", - "ETHERNET", - "I2C", - "I2CSLAVE", - "INTERRUPTIN", - "LOCALFILESYSTEM", - "PORTIN", - "PORTINOUT", - "PORTOUT", - "PWMOUT", - "SEMIHOST", - "SERIAL", - "SERIAL_FC", - "SLEEP", - "SPI", - "SPISLAVE", - "STDIO_MESSAGES", - "FLASH", - "MPU", - "WATCHDOG", - "RESET_REASON" - ], - "device_name": "LPC1768" - }, "LPC810": { "inherits": [ "LPCTarget"