mirror of https://github.com/ARMmbed/mbed-os.git
Adding MTB ublox ODIN W2
Ashok Rao
parent
9ebefcd63d
commit
dc3c7fc11e
|
|
@ -0,0 +1,61 @@
|
|||
/* mbed Microcontroller Library
|
||||
* Copyright (c) 2017 ARM Limited
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||
* you may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
void _eth_config_mac(ETH_HandleTypeDef *heth)
|
||||
{
|
||||
ETH_MACInitTypeDef macconf =
|
||||
{
|
||||
.Watchdog = ETH_WATCHDOG_ENABLE,
|
||||
.Jabber = ETH_JABBER_ENABLE,
|
||||
.InterFrameGap = ETH_INTERFRAMEGAP_96BIT,
|
||||
.CarrierSense = ETH_CARRIERSENCE_ENABLE,
|
||||
.ReceiveOwn = ETH_RECEIVEOWN_ENABLE,
|
||||
.LoopbackMode = ETH_LOOPBACKMODE_DISABLE,
|
||||
.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE,
|
||||
.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE,
|
||||
.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE,
|
||||
.BackOffLimit = ETH_BACKOFFLIMIT_10,
|
||||
.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE,
|
||||
.ReceiveAll = ETH_RECEIVEAll_DISABLE,
|
||||
.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE,
|
||||
.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL,
|
||||
.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE,
|
||||
.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL,
|
||||
.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE,
|
||||
.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_NONE, // Disable multicast filter
|
||||
.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT,
|
||||
.HashTableHigh = 0x0U,
|
||||
.HashTableLow = 0x0U,
|
||||
.PauseTime = 0x0U,
|
||||
.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE,
|
||||
.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4,
|
||||
.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE,
|
||||
.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE,
|
||||
.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE,
|
||||
.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT,
|
||||
.VLANTagIdentifier = 0x0U
|
||||
};
|
||||
|
||||
if (heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE) {
|
||||
macconf.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
|
||||
} else {
|
||||
macconf.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
|
||||
}
|
||||
|
||||
(void) HAL_ETH_ConfigMAC(heth, &macconf);
|
||||
}
|
||||
|
|
@ -0,0 +1,143 @@
|
|||
#include <string.h>
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "mbed_toolchain.h"
|
||||
|
||||
#define C029_OTP_START_ADDRESS (0x1FFF7800U)
|
||||
#define C029_OTP_END_ADDRESS (C029_OTP_START_ADDRESS + (16*32))
|
||||
#define C029_MAC_ETHERNET_ID (3)
|
||||
|
||||
typedef MBED_PACKED(struct) C029_OTP_Header {
|
||||
uint8_t id;
|
||||
uint8_t len;
|
||||
uint8_t data[];
|
||||
} C029_OTP_Header;
|
||||
|
||||
static int _macRetrieved = 0;
|
||||
static char _macAddr[6] = { 0x02, 0x02, 0xF7, 0xF0, 0x00, 0x00 };
|
||||
|
||||
static C029_OTP_Header *increment(C029_OTP_Header *pTemp)
|
||||
{
|
||||
uint8_t len = 0;
|
||||
uint8_t id = 0;
|
||||
uint8_t *p = (uint8_t*)pTemp;
|
||||
|
||||
memcpy((void*)&id, (void*)pTemp, 1);
|
||||
|
||||
if (id == 0xFF){
|
||||
p++;
|
||||
} else {
|
||||
p++;
|
||||
memcpy((void*)&len, (void*)p++, 1);
|
||||
p += len;
|
||||
}
|
||||
return (C029_OTP_Header*)p;
|
||||
}
|
||||
|
||||
/**
|
||||
* Override HAL Eth Init function
|
||||
*/
|
||||
void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
if (heth->Instance == ETH) {
|
||||
|
||||
/* Enable GPIOs clocks */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
|
||||
/** ETH GPIO Configuration
|
||||
RMII_REF_CLK ----------------------> PA1
|
||||
RMII_MDIO -------------------------> PA2
|
||||
RMII_MDC --------------------------> PC1
|
||||
RMII_MII_CRS_DV -------------------> PA7
|
||||
RMII_MII_RXD0 ---------------------> PC4
|
||||
RMII_MII_RXD1 ---------------------> PC5
|
||||
RMII_MII_RXER ---------------------> PG2
|
||||
RMII_MII_TX_EN --------------------> PB11
|
||||
RMII_MII_TXD0 ---------------------> PB12
|
||||
RMII_MII_TXD1 ---------------------> PB13
|
||||
*/
|
||||
/* Configure PA1, PA2 and PA7 */
|
||||
GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
|
||||
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStructure.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStructure.Pin = GPIO_PIN_2 | GPIO_PIN_7;
|
||||
GPIO_InitStructure.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStructure.Pin = GPIO_PIN_1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
/* Configure PB13 */
|
||||
GPIO_InitStructure.Pin = GPIO_PIN_13 | GPIO_PIN_11 | GPIO_PIN_12;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
|
||||
/* Configure PC1, PC4 and PC5 */
|
||||
GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
|
||||
|
||||
/* Enable the Ethernet global Interrupt */
|
||||
HAL_NVIC_SetPriority(ETH_IRQn, 0x7, 0);
|
||||
HAL_NVIC_EnableIRQ(ETH_IRQn);
|
||||
|
||||
/* Enable ETHERNET clock */
|
||||
__HAL_RCC_ETH_CLK_ENABLE();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Override HAL Eth DeInit function
|
||||
*/
|
||||
void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
|
||||
{
|
||||
if (heth->Instance == ETH) {
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ETH_CLK_DISABLE();
|
||||
|
||||
/** ETH GPIO Configuration
|
||||
RMII_REF_CLK ----------------------> PA1
|
||||
RMII_MDIO -------------------------> PA2
|
||||
RMII_MDC --------------------------> PC1
|
||||
RMII_MII_CRS_DV -------------------> PA7
|
||||
RMII_MII_RXD0 ---------------------> PC4
|
||||
RMII_MII_RXD1 ---------------------> PC5
|
||||
RMII_MII_RXER ---------------------> PG2
|
||||
RMII_MII_TX_EN --------------------> PB11
|
||||
RMII_MII_TXD0 ---------------------> PB12
|
||||
RMII_MII_TXD1 ---------------------> PB13
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7);
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13 | GPIO_PIN_11 | GPIO_PIN_12);
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5);
|
||||
|
||||
/* Disable the Ethernet global Interrupt */
|
||||
NVIC_DisableIRQ(ETH_IRQn);
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t mbed_otp_mac_address(char *mac)
|
||||
{
|
||||
C029_OTP_Header *pFound = NULL;
|
||||
C029_OTP_Header *pTemp = (C029_OTP_Header*)C029_OTP_START_ADDRESS;
|
||||
C029_OTP_Header temp;
|
||||
|
||||
if (_macRetrieved == 0) {
|
||||
while ((pTemp >= (C029_OTP_Header*)C029_OTP_START_ADDRESS) && (pTemp < (C029_OTP_Header*)C029_OTP_END_ADDRESS)){
|
||||
memcpy((void*)&temp, (void*)pTemp, sizeof(temp));
|
||||
if (temp.id == C029_MAC_ETHERNET_ID){
|
||||
pFound = pTemp;
|
||||
break;
|
||||
}
|
||||
pTemp = increment(pTemp);
|
||||
}
|
||||
if (pFound != NULL) {
|
||||
memcpy(_macAddr, pFound->data, 6);
|
||||
_macRetrieved = 1;
|
||||
}
|
||||
}
|
||||
memcpy(mac, _macAddr, 6);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
|
@ -0,0 +1,238 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "PinNamesTypes.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03,
|
||||
PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07,
|
||||
PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B,
|
||||
PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F,
|
||||
|
||||
PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13,
|
||||
PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17,
|
||||
PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B,
|
||||
PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F,
|
||||
|
||||
PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23,
|
||||
PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27,
|
||||
PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B,
|
||||
PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F,
|
||||
|
||||
PD_0 = 0x30, PD_1 = 0x31, PD_2 = 0x32, PD_3 = 0x33,
|
||||
PD_4 = 0x34, PD_5 = 0x35, PD_6 = 0x36, PD_7 = 0x37,
|
||||
PD_8 = 0x38, PD_9 = 0x39, PD_10 = 0x3A, PD_11 = 0x3B,
|
||||
PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F,
|
||||
|
||||
PE_0 = 0x40, PE_1 = 0x41, PE_2 = 0x42, PE_3 = 0x43,
|
||||
PE_4 = 0x44, PE_5 = 0x45, PE_6 = 0x46, PE_7 = 0x47,
|
||||
PE_8 = 0x48, PE_9 = 0x49, PE_10 = 0x4A, PE_11 = 0x4B,
|
||||
PE_12 = 0x4C, PE_13 = 0x4D, PE_14 = 0x4E, PE_15 = 0x4F,
|
||||
|
||||
PF_0 = 0x50, PF_1 = 0x51, PF_2 = 0x52, PF_3 = 0x53,
|
||||
PF_4 = 0x54, PF_5 = 0x55, PF_6 = 0x56, PF_7 = 0x57,
|
||||
PF_8 = 0x58, PF_9 = 0x59, PF_10 = 0x5A, PF_11 = 0x5B,
|
||||
PF_12 = 0x5C, PF_13 = 0x5D, PF_14 = 0x5E, PF_15 = 0x5F,
|
||||
|
||||
PG_0 = 0x60, PG_1 = 0x61, PG_2 = 0x62, PG_3 = 0x63,
|
||||
PG_4 = 0x64, PG_5 = 0x65, PG_6 = 0x66, PG_7 = 0x67,
|
||||
PG_8 = 0x68, PG_9 = 0x69, PG_10 = 0x6A, PG_11 = 0x6B,
|
||||
PG_12 = 0x6C, PG_13 = 0x6D, PG_14 = 0x6E, PG_15 = 0x6F,
|
||||
|
||||
PH_0 = 0x70, PH_1 = 0x71, PH_2 = 0x72, PH_3 = 0x73,
|
||||
PH_4 = 0x74, PH_5 = 0x75, PH_6 = 0x76, PH_7 = 0x77,
|
||||
PH_8 = 0x78, PH_9 = 0x79, PH_10 = 0x7A, PH_11 = 0x7B,
|
||||
PH_12 = 0x7C, PH_13 = 0x7D, PH_14 = 0x7E, PH_15 = 0x7F,
|
||||
|
||||
// Not connected
|
||||
NC = (int)0xFFFFFFFF,
|
||||
|
||||
// Module Pins
|
||||
// PortA
|
||||
P_A1 = NC,
|
||||
P_A2 = NC,
|
||||
P_A3 = NC,
|
||||
P_A4 = NC,
|
||||
P_A5 = PC_2, // UART-DTR
|
||||
P_A6 = PF_2, // Switch-0
|
||||
P_A7 = PE_0, // Red, Mode
|
||||
P_A8 = PB_6, // Green, Switch-1
|
||||
P_A9 = PB_8, // Blue
|
||||
P_A10 = PA_11, // UART-CTS
|
||||
P_A11 = PA_9, // UART-TXD
|
||||
P_A12 = PA_12, // UART-RTS
|
||||
P_A13 = PA_10, // UART-RXD
|
||||
P_A14 = PD_9, // GPIO-0
|
||||
P_A15 = PD_8, // GPIO-1
|
||||
P_A16 = PD_11, // GPIO-2
|
||||
P_A17 = PD_12, // GPIO-3
|
||||
P_A18 = PA_3, // UART-DSR
|
||||
// PortB
|
||||
P_B1 = NC,
|
||||
P_B2 = NC,
|
||||
P_B3 = NC,
|
||||
P_B4 = NC,
|
||||
P_B5 = NC,
|
||||
P_B6 = NC,
|
||||
P_B7 = NC,
|
||||
P_B8 = NC,
|
||||
// PortC
|
||||
P_C1 = NC,
|
||||
P_C2 = NC,
|
||||
P_C3 = NC,
|
||||
P_C4 = NC,
|
||||
P_C5 = PG_4, // SPI-IRQ
|
||||
P_C6 = PE_13, // SPI-MISO
|
||||
P_C7 = NC,
|
||||
P_C8 = PE_12, // Res
|
||||
P_C9 = NC,
|
||||
P_C10 = PE_14, // SPI-MOSI
|
||||
P_C11 = PE_11, // SPI-CS0
|
||||
P_C12 = PE_9, // Res
|
||||
P_C13 = PF_6, // GPIO-4
|
||||
P_C14 = PC_1, // RMII-MDC
|
||||
P_C15 = PA_2, // RMII-MDIO
|
||||
P_C16 = PF_7, // GPIO-7
|
||||
P_C17 = PF_1, // I2C-SCL
|
||||
P_C18 = PF_0, // I2C-SDA
|
||||
// PortD
|
||||
P_D1 = PB_12, // RMII-TXD0
|
||||
P_D2 = PB_13, // RMII-TXD1
|
||||
P_D3 = PB_11, // RMII-TXEN
|
||||
P_D4 = PA_7, // RMII-CRSDV
|
||||
P_D5 = PC_4, // RMII-RXD0
|
||||
P_D6 = PC_5, // RMII-RXD1
|
||||
P_D7 = NC,
|
||||
P_D8 = PA_1, // RMII-REFCLK
|
||||
// TestPads
|
||||
P_TP5 = PB_4, // NTRST
|
||||
P_TP7 = PA_13, // TMS SWDIO
|
||||
P_TP8 = PA_15, // TDI
|
||||
P_TP9 = PA_14, // TCK SWCLK
|
||||
P_TP10 = PB_3, // TDO
|
||||
//P_TP11, // BOOT0
|
||||
|
||||
// Internal
|
||||
LED1 = PD_9,
|
||||
LED2 = PA_12,
|
||||
LED3 = PD_8,
|
||||
LED4 = PA_11,
|
||||
LED5 = PC_2,
|
||||
LED6 = PA_3,
|
||||
LED7 = PF_6,
|
||||
LED_RED = PE_0,
|
||||
LED_GREEN = PB_6,
|
||||
LED_BLUE = PB_8,
|
||||
SW1 = PF_2,
|
||||
SW2 = PG_4,
|
||||
|
||||
// Standardized button names
|
||||
BUTTON1 = SW1,
|
||||
BUTTON2 = SW2,
|
||||
|
||||
I2C_SDA = PF_0,
|
||||
I2C_SCL = PF_1,
|
||||
|
||||
SPI0_MOSI = PE_14,
|
||||
SPI0_MISO = PE_13,
|
||||
SPI0_SCK = PE_12,
|
||||
SPI0_CS = PE_11,
|
||||
SPI1_CS = PE_9,
|
||||
|
||||
SPI_MOSI = SPI0_MOSI,
|
||||
SPI_MISO = SPI0_MISO,
|
||||
SPI_SCK = SPI0_SCK,
|
||||
SPI_CS = SPI0_CS,
|
||||
|
||||
// DAPLink
|
||||
USBRX = MBED_CONF_TARGET_USB_RX,
|
||||
USBTX = MBED_CONF_TARGET_USB_TX,
|
||||
SWDIO = PA_15,
|
||||
SWCLK = PA_14,
|
||||
NTRST = PB_4,
|
||||
|
||||
// MTB Aliases
|
||||
// Left side (top view)
|
||||
TGT_SWDIO = SWDIO,
|
||||
TGT_SWCLK = SWCLK,
|
||||
TGT_RESET = NTRST,
|
||||
TG_TX = USBTX,
|
||||
TG_RX = USBRX,
|
||||
TX1 = P_A15,
|
||||
RX1 = P_A14,
|
||||
SDA1 = P_C18,
|
||||
SCL1 = P_C17,
|
||||
MOSI1 = P_C10,
|
||||
MISO1 = P_C6,
|
||||
SCK1 = SPI_SCK,
|
||||
GP0 = BUTTON1,
|
||||
GP1 = SPI_CS,
|
||||
AIN0 = P_C13,
|
||||
AIN1 = P_A18,
|
||||
AIN2 = P_A5,
|
||||
|
||||
//Right side (top view)
|
||||
GND = NC,
|
||||
GP10 = NC,
|
||||
RTS = NC,
|
||||
CTS = NC,
|
||||
GP7 = P_C12,
|
||||
GP6 = P_A12,
|
||||
GP5 = P_A10,
|
||||
GP4 = P_A17,
|
||||
TX2 = NC,
|
||||
RX2 = NC,
|
||||
SDA2 = NC,
|
||||
SCL2 = NC,
|
||||
MOSI2 = NC,
|
||||
MISO2 = NC,
|
||||
SCK2 = NC,
|
||||
GP3 = P_A16,
|
||||
GP2 = P_C5,
|
||||
PWM2 = LED_GREEN,
|
||||
PWM1 = LED_BLUE,
|
||||
PWM0 = LED_RED,
|
||||
|
||||
|
||||
} PinName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1833,6 +1833,25 @@
|
|||
}
|
||||
}
|
||||
},
|
||||
"MTB_UBLOX_ODIN_W2": {
|
||||
"inherits": ["MODULE_UBLOX_ODIN_W2"],
|
||||
"release_versions": ["5"],
|
||||
"config": {
|
||||
"usb_tx": {
|
||||
"help": "Value PA_11",
|
||||
"value": "PA_11"
|
||||
},
|
||||
"usb_rx": {
|
||||
"help": "Value PA_13",
|
||||
"value": "PA_13"
|
||||
},
|
||||
"stdio_uart": {
|
||||
"help": "Value: UART_1",
|
||||
"value": "UART_1",
|
||||
"macro_name": "STDIO_UART"
|
||||
}
|
||||
}
|
||||
},
|
||||
"UBLOX_C030": {
|
||||
"inherits": ["FAMILY_STM32"],
|
||||
"supported_form_factors": ["ARDUINO"],
|
||||
|
|
|
|||
Loading…
Reference in New Issue