diff --git a/targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L562xx/TARGET_DISCO_L562QE/PeripheralPins.c b/targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L562xx/TARGET_DISCO_L562QE/PeripheralPins.c new file mode 100644 index 0000000000..b361f0c3cd --- /dev/null +++ b/targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L562xx/TARGET_DISCO_L562QE/PeripheralPins.c @@ -0,0 +1,436 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2018, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + * + * Automatically generated from STM32L562QEIxQ.xml + */ + +#include "PeripheralPins.h" +#include "mbed_toolchain.h" + +//============================================================================== +// Notes +// +// - The pins mentioned Px_y_ALTz are alternative possibilities which use other +// HW peripheral instances. You can use them the same way as any other "normal" +// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board +// pinout image on mbed.org. +// +// - The pins which are connected to other components present on the board have +// the comment "Connected to xxx". The pin function may not work properly in this +// case. These pins may not be displayed on the board pinout image on mbed.org. +// Please read the board reference manual and schematic for more information. +// +// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented +// See https://os.mbed.com/teams/ST/wiki/STDIO for more information. +// +//============================================================================== + + +//*** ADC *** + +MBED_WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 + {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 + {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 // Connected to OCTOSPI1_NCS + {PA_2_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 // Connected to OCTOSPI1_NCS + {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 // Connected to OCTOSPI1_CLK + {PA_3_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8 // Connected to OCTOSPI1_CLK + {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 // Connected to VBUS_SENSE + {PA_4_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9 // Connected to VBUS_SENSE + {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 + {PA_5_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10 + {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 // Connected to OCTOSPI1_IO3 + {PA_6_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 // Connected to OCTOSPI1_IO3 + {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 // Connected to OCTOSPI1_IO2 + {PA_7_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 // Connected to OCTOSPI1_IO2 + {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 // Connected to OCTOSPI1_IO1 + {PB_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15 // Connected to OCTOSPI1_IO1 + {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16 // Connected to OCTOSPI1_IO0 + {PB_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC2_IN16 // Connected to OCTOSPI1_IO0 + {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 // Connected to OCTOSPI1_IO7 + {PC_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 // Connected to OCTOSPI1_IO7 + {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 // Connected to OCTOSPI1_IO4 + {PC_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 // Connected to OCTOSPI1_IO4 + {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 // Connected to OCTOSPI1_IO5 + {PC_2_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 // Connected to OCTOSPI1_IO5 + {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 // Connected to OCTOSPI1_IO6 + {PC_3_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 // Connected to OCTOSPI1_IO6 + {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PC_4_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13 + {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {PC_5_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_ADC_Internal[] = { + {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, + {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, + {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, + {NC, NC, 0} +}; + +//*** DAC *** + +MBED_WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 // Connected to VBUS_SENSE + {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 + {NC, NC, 0} +}; + +//*** I2C *** + +MBED_WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Connected to I2C1_SDA + {PB_7_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C4)}, // Connected to I2C1_SDA + {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to LPUART1_TX + {PB_11_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C4)}, // Connected to LPUART1_TX + {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to UCPD_FLT + {PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Connected to OCTOSPI1_IO4 + {PD_13, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, + {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to FMC_A0 + {PF_15, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // Connected to CTP_RST + {PG_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Connected to BLE_RSTN + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Connected to OCTOSPI1_IO2 + {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Connected to I2C1_SCL + {PB_6_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C4)}, // Connected to I2C1_SCL + {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to LPUART1_RX + {PB_10_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C4)}, // Connected to LPUART1_RX + {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Connected to OCTOSPI1_IO7 + {PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, + {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to CTP_INT + {PF_14, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // Connected to LCD_RST + {PG_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Connected to S_CKOUTDFSDM1 + {NC, NC, 0} +}; + +//*** PWM *** + +// TIM5 cannot be used because already used by the us_ticker +MBED_WEAK const PinMap PinMap_PWM[] = { + {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 +// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 + {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 +// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + {PA_1_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to OCTOSPI1_NCS +// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 // Connected to OCTOSPI1_NCS + {PA_2_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1 // Connected to OCTOSPI1_NCS + {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to OCTOSPI1_CLK +// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 // Connected to OCTOSPI1_CLK + {PA_3_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2 // Connected to OCTOSPI1_CLK + {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PA_5_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 // Connected to OCTOSPI1_IO3 + {PA_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1 // Connected to OCTOSPI1_IO3 + {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N // Connected to OCTOSPI1_IO2 + {PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 // Connected to OCTOSPI1_IO2 + {PA_7_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N // Connected to OCTOSPI1_IO2 + {PA_7_ALT2, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1 // Connected to OCTOSPI1_IO2 + {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 // Connected to LCD.TE +// {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 // Connected to STDIO_UART_RX +// {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 // Connected to STDIO_UART_TX + {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 // Connected to USB_DM + {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N // Connected to OCTOSPI1_IO1 + {PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 // Connected to OCTOSPI1_IO1 + {PB_0_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N // Connected to OCTOSPI1_IO1 + {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N // Connected to OCTOSPI1_IO0 + {PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 // Connected to OCTOSPI1_IO0 + {PB_1_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N // Connected to OCTOSPI1_IO0 + {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 // Connected to UCPD_DBn + {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 // Connected to I2C1_SCL + {PB_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N // Connected to I2C1_SCL + {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 // Connected to I2C1_SDA + {PB_7_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N // Connected to I2C1_SDA + {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + {PB_8_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + {PB_9_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to LPUART1_RX + {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to LPUART1_TX + {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + {PB_13_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N + {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N // Connected to UCPD_FLT + {PB_14_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N // Connected to UCPD_FLT + {PB_14_ALT1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1 // Connected to UCPD_FLT + {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N // Connected to UCPD1_CC2 + {PB_15_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N // Connected to UCPD1_CC2 + {PB_15_ALT1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2 // Connected to UCPD1_CC2 + {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PC_6_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 + {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PC_7_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 + {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 // Connected to SDMMC1_D0 + {PC_8_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 // Connected to SDMMC1_D0 + {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 // Connected to SDMMC1_D1 + {PC_9_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 // Connected to SDMMC1_D1 + {PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + {PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + {PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 // Connected to FMC_D0_DA0 + {PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 // Connected to FMC_D1_DA1 + {PE_0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1 + {PE_1, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1 // Connected to LCD_BL_PWM + {PE_3, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 // Connected to SAI1_SD_B + {PE_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 // Connected to SAI1_FS_A + {PE_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 // Connected to SAI1_SCK_A + {PE_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 // Connected to SAI1_SD_A + {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N // Connected to FMC_D5_DA5 + {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 // Connected to FMC_D6_DA6 + {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N // Connected to FMC_D7_DA7 + {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 // Connected to FMC_D8_DA8 + {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N // Connected to FMC_D9_DA9 + {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 // Connected to FMC_D10_DA10 + {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 // Connected to FMC_D11_DA11 + {PG_9, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N + {PG_10, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1 + {NC, NC, 0} +}; + +//*** SERIAL *** + +MBED_WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to OCTOSPI1_NCS + {PA_2_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to OCTOSPI1_NCS + {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_RX + {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to I2C1_SCL + {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to LPUART1_RX + {PB_11, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to LPUART1_TX + {PC_1, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to OCTOSPI1_IO4 + {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to SDMMC1_D2 + {PC_10_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Connected to SDMMC1_D2 + {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // Connected to SDMMC1_CK + {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to FMC_NWE + {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to FMC_D13_DA13 + {PG_7, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to S_CKOUTDFSDM1 + {PG_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to OCTOSPI1_CLK + {PA_3_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to OCTOSPI1_CLK + {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_TX + {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)}, + {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to I2C1_SDA + {PB_10, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to LPUART1_RX + {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to LPUART1_TX + {PC_0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to OCTOSPI1_IO7 + {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to SDMMC1_D3 + {PC_11_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Connected to SDMMC1_D3 + {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // Connected to SDMMC1_CMD + {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to FMC_D14_DA14 + {PG_8, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to BLE_RSTN + {PG_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DP + {PA_15, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PA_15_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PB_1, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to OCTOSPI1_IO0 + {PB_1_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to OCTOSPI1_IO0 + {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, + {PB_12, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to S_DATAIN1DFSDM1 + {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to UCPD_FLT + {PD_2, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to SDMMC1_CMD + {PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to FMC_NOE + {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PG_6, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to BLE_INT + {PG_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to LED_GREEN + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_6, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to OCTOSPI1_IO3 + {PA_6_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to OCTOSPI1_IO3 + {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DM + {PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // Connected to UCPD_DBn + {PB_7, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // Connected to I2C1_SDA + {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PB_13_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, + {PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to LED_RED + {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PG_5, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to BLE_CSN + {NC, NC, 0} +}; + +//*** SPI *** + +MBED_WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to OCTOSPI1_IO2 + {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to USB_DP + {PB_5_ALT0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to UCPD_DBn + {PB_5 , SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to UCPD_DBn + {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to UCPD1_CC2 + {PC_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)}, // Connected to OCTOSPI1_IO4 + {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to OCTOSPI1_IO6 + {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to SDMMC1_CK + {PD_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to FMC_NOE + {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI3)}, + {PE_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to FMC_D12_DA12 + {PG_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SPI1_MOSI + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to OCTOSPI1_IO3 + {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to USB_DM + {PB_4_ALT0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_4 , SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to UCPD_FLT + {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to OCTOSPI1_IO5 + {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to SDMMC1_D3 + {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to LED_RED + {PE_14, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to FMC_D11_DA11 + {PG_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SPI1_MISO + {PG_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_1, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, +// {PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)}, // Connected to STDIO_UART_RX + {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to LPUART1_RX + {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to SDMMC1_D2 + {PD_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to FMC_D3_DA3 + {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)}, // Connected to LED_RED + {PE_13, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to FMC_D10_DA10 + {PG_2, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SPI1_SCK + {PG_9, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to VBUS_SENSE + {PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to VBUS_SENSE + {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to OCTOSPI1_IO1 + {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to S_DATAIN1DFSDM1 + {PD_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to FMC_D2_DA2 + {PE_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to FMC_D9_DA9 + {PG_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to BLE_CSN + {PG_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to LED_GREEN + {NC, NC, 0} +}; + +//*** CAN *** + +MBED_WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // Connected to USB_DM + {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, + {PD_0, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // Connected to FMC_D2_DA2 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // Connected to USB_DP + {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, + {PD_1, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // Connected to FMC_D3_DA3 + {NC, NC, 0} +}; + +//*** QUADSPI *** + +MBED_WEAK const PinMap PinMap_QSPI_DATA0[] = { + {PB_1, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO0 // Connected to OCTOSPI1_IO0 + {PE_12, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO0 // Connected to FMC_D9_DA9 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_QSPI_DATA1[] = { + {PB_0, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO1 // Connected to OCTOSPI1_IO1 + {PE_13, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO1 // Connected to FMC_D10_DA10 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_QSPI_DATA2[] = { + {PA_7, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO2 // Connected to OCTOSPI1_IO2 + {PE_14, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO2 // Connected to FMC_D11_DA11 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_QSPI_DATA3[] = { + {PA_6, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO3 // Connected to OCTOSPI1_IO3 + {PE_15, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_IO3 // Connected to FMC_D12_DA12 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_QSPI_SCLK[] = { + {PA_3, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_CLK // Connected to OCTOSPI1_CLK + {PB_10, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_CLK // Connected to LPUART1_RX + {PE_10, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_CLK // Connected to FMC_D7_DA7 + {NC, NC, 0} +}; + +MBED_WEAK const PinMap PinMap_QSPI_SSEL[] = { + {PA_2, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_NCS // Connected to OCTOSPI1_NCS + {PA_4, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPI1)}, // OCTOSPI1_NCS // Connected to VBUS_SENSE + {PB_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_NCS // Connected to LPUART1_TX + {PC_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPI1)}, // OCTOSPI1_NCS // Connected to SDMMC1_D3 + {PE_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPI1)}, // OCTOSPI1_NCS // Connected to FMC_D8_DA8 + {NC, NC, 0} +}; + +//*** USBDEVICE *** + +MBED_WEAK const PinMap PinMap_USB_FS[] = { + {PA_11, USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM // Connected to USB_DM + {PA_12, USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP // Connected to USB_DP +// {PA_13, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE +// {PC_9, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE // Connected to SDMMC1_D1 + {NC, NC, 0} +}; diff --git a/targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L562xx/TARGET_DISCO_L562QE/PinNames.h b/targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L562xx/TARGET_DISCO_L562QE/PinNames.h new file mode 100644 index 0000000000..70987c2eff --- /dev/null +++ b/targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L562xx/TARGET_DISCO_L562QE/PinNames.h @@ -0,0 +1,361 @@ +/* + * SPDX-License-Identifier: BSD-3-Clause + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* File generated from STM32L562QEIxQ.xml */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ALT0 = 0x100, + ALT1 = 0x200, + ALT2 = 0x300, + ALT3 = 0x400 +} ALTx; + +typedef enum { + PA_0 = 0x00, + PA_0_ALT0 = PA_0 | ALT0, + PA_1 = 0x01, + PA_1_ALT0 = PA_1 | ALT0, + PA_1_ALT1 = PA_1 | ALT1, + PA_2 = 0x02, + PA_2_ALT0 = PA_2 | ALT0, + PA_2_ALT1 = PA_2 | ALT1, + PA_3 = 0x03, + PA_3_ALT0 = PA_3 | ALT0, + PA_3_ALT1 = PA_3 | ALT1, + PA_4 = 0x04, + PA_4_ALT0 = PA_4 | ALT0, + PA_5 = 0x05, + PA_5_ALT0 = PA_5 | ALT0, + PA_6 = 0x06, + PA_6_ALT0 = PA_6 | ALT0, + PA_7 = 0x07, + PA_7_ALT0 = PA_7 | ALT0, + PA_7_ALT1 = PA_7 | ALT1, + PA_7_ALT2 = PA_7 | ALT2, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + PA_15_ALT0 = PA_15 | ALT0, + + PB_0 = 0x10, + PB_0_ALT0 = PB_0 | ALT0, + PB_0_ALT1 = PB_0 | ALT1, + PB_1 = 0x11, + PB_1_ALT0 = PB_1 | ALT0, + PB_1_ALT1 = PB_1 | ALT1, + PB_2 = 0x12, + PB_3 = 0x13, + PB_3_ALT0 = PB_3 | ALT0, + PB_4 = 0x14, + PB_4_ALT0 = PB_4 | ALT0, + PB_5 = 0x15, + PB_5_ALT0 = PB_5 | ALT0, + PB_6 = 0x16, + PB_6_ALT0 = PB_6 | ALT0, + PB_7 = 0x17, + PB_7_ALT0 = PB_7 | ALT0, + PB_8 = 0x18, + PB_8_ALT0 = PB_8 | ALT0, + PB_9 = 0x19, + PB_9_ALT0 = PB_9 | ALT0, + PB_10 = 0x1A, + PB_10_ALT0 = PB_10 | ALT0, + PB_11 = 0x1B, + PB_11_ALT0 = PB_11 | ALT0, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_13_ALT0 = PB_13 | ALT0, + PB_14 = 0x1E, + PB_14_ALT0 = PB_14 | ALT0, + PB_14_ALT1 = PB_14 | ALT1, + PB_15 = 0x1F, + PB_15_ALT0 = PB_15 | ALT0, + PB_15_ALT1 = PB_15 | ALT1, + + PC_0 = 0x20, + PC_0_ALT0 = PC_0 | ALT0, + PC_0_ALT1 = PC_0 | ALT1, + PC_1 = 0x21, + PC_1_ALT0 = PC_1 | ALT0, + PC_1_ALT1 = PC_1 | ALT1, + PC_2 = 0x22, + PC_2_ALT0 = PC_2 | ALT0, + PC_2_ALT1 = PC_2 | ALT1, + PC_3 = 0x23, + PC_3_ALT0 = PC_3 | ALT0, + PC_3_ALT1 = PC_3 | ALT1, + PC_4 = 0x24, + PC_4_ALT0 = PC_4 | ALT0, + PC_5 = 0x25, + PC_5_ALT0 = PC_5 | ALT0, + PC_6 = 0x26, + PC_6_ALT0 = PC_6 | ALT0, + PC_7 = 0x27, + PC_7_ALT0 = PC_7 | ALT0, + PC_8 = 0x28, + PC_8_ALT0 = PC_8 | ALT0, + PC_9 = 0x29, + PC_9_ALT0 = PC_9 | ALT0, + PC_10 = 0x2A, + PC_10_ALT0 = PC_10 | ALT0, + PC_11 = 0x2B, + PC_11_ALT0 = PC_11 | ALT0, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_0 = 0x30, + PD_1 = 0x31, + PD_2 = 0x32, + PD_3 = 0x33, + PD_4 = 0x34, + PD_5 = 0x35, + PD_6 = 0x36, + PD_7 = 0x37, + PD_8 = 0x38, + PD_9 = 0x39, + PD_10 = 0x3A, + PD_11 = 0x3B, + PD_12 = 0x3C, + PD_13 = 0x3D, + PD_14 = 0x3E, + PD_15 = 0x3F, + + PE_0 = 0x40, + PE_1 = 0x41, + PE_2 = 0x42, + PE_3 = 0x43, + PE_4 = 0x44, + PE_5 = 0x45, + PE_6 = 0x46, + PE_7 = 0x47, + PE_8 = 0x48, + PE_9 = 0x49, + PE_10 = 0x4A, + PE_11 = 0x4B, + PE_12 = 0x4C, + PE_13 = 0x4D, + PE_14 = 0x4E, + PE_15 = 0x4F, + + PF_0 = 0x50, + PF_1 = 0x51, + PF_2 = 0x52, + PF_3 = 0x53, + PF_4 = 0x54, + PF_5 = 0x55, + PF_6 = 0x56, + PF_7 = 0x57, + PF_8 = 0x58, + PF_9 = 0x59, + PF_9_ALT0 = PF_9 | ALT0, + PF_10 = 0x5A, + PF_11 = 0x5B, + PF_12 = 0x5C, + PF_13 = 0x5D, + PF_14 = 0x5E, + PF_15 = 0x5F, + + PG_0 = 0x60, + PG_1 = 0x61, + PG_2 = 0x62, + PG_3 = 0x63, + PG_4 = 0x64, + PG_5 = 0x65, + PG_6 = 0x66, + PG_7 = 0x67, + PG_8 = 0x68, + PG_9 = 0x69, + PG_10 = 0x6A, + PG_11 = 0x6B, + PG_12 = 0x6C, + PG_13 = 0x6D, + PG_14 = 0x6E, + PG_15 = 0x6F, + + PH_0 = 0x70, + PH_1 = 0x71, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF = 0xF1, + ADC_VBAT = 0xF2, + + // Arduino UNO V3 connector namings + A0 = PA_0, + A1 = PA_1, + A2 = PA_4, + A3 = PA_5, + A4 = PC_4, + A5 = PC_5, + D0 = PB_10, + D1 = PB_11, + D2 = PD_11, + D3 = PD_12, + D4 = PF_4, + D5 = PD_13, + D6 = PB_8, + D7 = PC_6, + D8 = PG_0, + D9 = PB_9, + D10 = PE_0, + D11 = PB_5, + D12 = PB_4, + D13 = PG_9, + D14 = PB_7, + D15 = PB_6, + + // STDIO for console print +#ifdef MBED_CONF_TARGET_STDIO_UART_TX + STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, +#else + STDIO_UART_TX = PA_9, +#endif +#ifdef MBED_CONF_TARGET_STDIO_UART_RX + STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, +#else + STDIO_UART_RX = PA_10, +#endif + + // Generic signals namings + LED1 = PG_12, // LD7 Green + LED2 = PE_1, // LD9 Red + LED3 = LED1, + LED4 = LED1, + LED_GREEN = LED1, + LED_BLUE = LED2, + LED_RED = LED2, + + // Standardized button names + USER_BUTTON = PC_13, + BUTTON1 = USER_BUTTON, + + SERIAL_TX = STDIO_UART_TX, // Virtual Com Port + SERIAL_RX = STDIO_UART_RX, // Virtual Com Port + USBTX = STDIO_UART_TX, // Virtual Com Port + USBRX = STDIO_UART_RX, // Virtual Com Port + I2C_SCL = D15, + I2C_SDA = D14, + SPI_MOSI = D11, + SPI_MISO = D12, + SPI_SCK = D13, + SPI_CS = D10, + PWM_OUT = D9, + + /**** USB pins ****/ + USB_DM = PA_11, + USB_DP = PA_12, + USB_NOE = PA_13, + USB_NOE_ALT0 = PC_9, + + /**** OSCILLATOR pins ****/ + RCC_OSC32_IN = PC_14, + RCC_OSC32_OUT = PC_15, + RCC_OSC_IN = PH_0, + RCC_OSC_OUT = PH_1, + + /**** DEBUG pins ****/ + DEBUG_JTCK_SWCLK = PA_14, + DEBUG_JTDI = PA_15, + DEBUG_JTDO_SWO = PB_3, + DEBUG_JTMS_SWDIO = PA_13, + DEBUG_JTRST = PB_4, + DEBUG_TRACECLK = PE_2, + DEBUG_TRACED0 = PE_3, + DEBUG_TRACED0_ALT0 = PC_9, + DEBUG_TRACED0_ALT1 = PC_1, + DEBUG_TRACED1 = PE_4, + DEBUG_TRACED1_ALT0 = PC_10, + DEBUG_TRACED2 = PE_5, + DEBUG_TRACED2_ALT0 = PD_2, + DEBUG_TRACED3 = PC_12, + DEBUG_TRACED3_ALT0 = PE_6, + PWR_PVD_IN = PB_7, + + /**** QSPI FLASH pins ****/ + QSPI_FLASH1_IO0 = PB_1, + QSPI_FLASH1_IO1 = PB_0, + QSPI_FLASH1_IO2 = PA_7, + QSPI_FLASH1_IO3 = PA_6, + QSPI_FLASH1_SCK = PA_3, + QSPI_FLASH1_CSN = PA_2, + + /**** STMOD+ pins ****/ + /* STMOD_2 and STMOD_3 depends on STMOD+.SEL_12 (PF11) GPIO value */ + /* STMOD_4 depends on STMOD+.SEL_34 (PF12) GPIO value */ + STMOD_1 = PB_13, // UART3_CTS // SPI3_NSS + STMOD_2 = PC_10, // UART3_TX (default PF11 value is 1) + // STMOD_2 = PB_5, // SPI3_MOSI (when PF11 set to 0) + STMOD_3 = PC_11, // UART3_RX + // STMOD_3 = PB_4, // SPI3_MISO (when PF11 set to 0) + // STMOD_4 = PD_2, // UART3_RTS (when PF12 set to 1) + STMOD_4 = PG_9, // SPI3_SCLK (default PF12 value is 0) +// STMOD_5 is connected to GND +// STMOD_6 is connected to +5V + STMOD_7 = PB_6, // I2C1_SCL + STMOD_8 = PD_6, // SPI3_MOSI + STMOD_9 = PG_10, // SPI3_MISO + STMOD_10 = PB_7, // I2C1_SDA + STMOD_11 = PF_5, + STMOD_12 = PC_9, + STMOD_13 = PA_0, + STMOD_14 = PC_8, +// STMOD_15 is connected to +5V +// STMOD_16 is connected to GND + STMOD_17 = PB_12, + STMOD_18 = PG_7, + STMOD_19 = PC_7, + STMOD_20 = PG_7, + + /**** PMOD pins ****/ + PMOD_1 = STMOD_1, + PMOD_2 = STMOD_2, + PMOD_3 = STMOD_3, + PMOD_4 = STMOD_4, +// PMOD_5 is connected to GND +// PMOD_6 is connected to +3V3 + PMOD_7 = STMOD_11, + PMOD_8 = STMOD_12, +// PMOD_9 is not connected +// PMOD_10 is not connected +// PMOD_11 is connected to GND +// PMOD_12 is connected to +3V3 + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/targets/targets.json b/targets/targets.json index f3813fe909..557bff659b 100644 --- a/targets/targets.json +++ b/targets/targets.json @@ -12566,6 +12566,58 @@ "5" ] }, + "DISCO_L562QE": { + "inherits": ["FAMILY_STM32"], + "core": "Cortex-M33FE", + "extra_labels_add": [ + "STM32L5", + "STM32L562xx", + "MX25LM51245G" + ], + "supported_form_factors": [ + "ARDUINO", + "STMOD", + "PMOD" + ], + "components_add": [ + "FLASHIAP" + ], + "macros_add": [ + "STM32L562xx", + "MBED_TICKLESS", + "EXTRA_IDLE_STACK_REQUIRED" + ], + "config": { + "clock_source": { + "help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI", + "value": "USE_PLL_MSI", + "macro_name": "CLOCK_SOURCE" + }, + "lpticker_lptim": { + "help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer", + "value": 1 + } + }, + "overrides": { + "lpticker_delay_ticks": 0 + }, + "device_has_add": [ + "ANALOGOUT", + "CRC", + "MPU", + "SERIAL_ASYNCH", + "TRNG", + "FLASH", + "QSPI" + ], + "detect_code": ["0854"], + "bootloader_supported": true, + "mbed_rom_start": "0x08000000", + "mbed_rom_size": "0x80000", + "mbed_ram_start": "0x20000000", + "mbed_ram_size": "0x40000", + "release_versions": [ "5" ] + }, "VBLUNO52": { "supported_form_factors": [ "ARDUINO"