diff --git a/targets/TARGET_NUVOTON/TARGET_M261/analogin_api.c b/targets/TARGET_NUVOTON/TARGET_M261/analogin_api.c
index 610b3743dc..e5a07618ba 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/analogin_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/analogin_api.c
@@ -54,28 +54,28 @@ void analogin_init(analogin_t *obj, PinName pin)
     MBED_ASSERT(modinit != NULL);
     MBED_ASSERT(modinit->modname == (int) obj->adc);
 
+    // Wire pinout
+    pinmap_pinout(pin, PinMap_ADC);
+
     EADC_T *eadc_base = (EADC_T *) NU_MODBASE(obj->adc);
 
     // NOTE: All channels (identified by ADCName) share a ADC module. This reset will also affect other channels of the same ADC module.
     if (! eadc_modinit_mask) {
-        // Reset module
-        SYS_ResetModule(modinit->rsetidx);
-
         // Select IP clock source
         CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv);
         
         // Enable IP clock
         CLK_EnableModuleClock(modinit->clkidx);
 
+        // Reset module
+        SYS_ResetModule(modinit->rsetidx);
+
         // Set the ADC internal sampling time, input mode as single-end and enable the A/D converter
         EADC_Open(eadc_base, EADC_CTL_DIFFEN_SINGLE_END);
     }
 
     uint32_t chn =  NU_MODSUBINDEX(obj->adc);
 
-    // Wire pinout
-    pinmap_pinout(pin, PinMap_ADC);
-
     // Configure the sample module Nmod for analog input channel Nch and software trigger source
     EADC_ConfigSampleModule(eadc_base, chn, EADC_SOFTWARE_TRIGGER, chn);
 
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/analogout_api.c b/targets/TARGET_NUVOTON/TARGET_M261/analogout_api.c
index 2b9b9bb5ca..ebaa997afe 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/analogout_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/analogout_api.c
@@ -53,6 +53,9 @@ void analogout_init(dac_t *obj, PinName pin)
     uint32_t chn =  NU_MODSUBINDEX(obj->dac);
     MBED_ASSERT(chn < NU_DACCHN_MAXNUM);
 
+    /* Wire pinout */
+    pinmap_pinout(pin, PinMap_DAC);
+
     DAC_T *dac_base = (DAC_T *) NU_MODBASE(obj->dac);
 
     /* Module-level setup from here */
@@ -66,15 +69,15 @@ void analogout_init(dac_t *obj, PinName pin)
      *    channels are deactivated.
      */
     if ((! dac_modinit_mask[0]) && (! dac_modinit_mask[1])) {
-        // Reset IP
-        SYS_ResetModule(modinit->rsetidx);
-        
         // Select IP clock source and clock divider
         CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv);
 
         // Enable IP clock
         CLK_EnableModuleClock(modinit->clkidx);
-        
+
+        // Reset IP
+        SYS_ResetModule(modinit->rsetidx);
+
         /* The conversion settling time is 8us when 12-bit input code transition from
          * lowest code (0x000) to highest code (0xFFF). */
         DAC_SetDelayTime(dac_base, 8);
@@ -88,9 +91,6 @@ void analogout_init(dac_t *obj, PinName pin)
 
     /* Set the software trigger, enable DAC event trigger mode and enable D/A converter */
     DAC_Open(dac_base, chn, DAC_SOFTWARE_TRIGGER);
-        
-    /* Wire pinout */
-    pinmap_pinout(pin, PinMap_DAC);
 
     /* Mark channel allocated */
     dac_modinit_mask[modidx] |= 1 << chn;
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/dma_api.c b/targets/TARGET_NUVOTON/TARGET_M261/dma_api.c
index 1e0beeea49..c7fd12486d 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/dma_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/dma_api.c
@@ -54,12 +54,12 @@ void dma_init(void)
     dma_chn_mask = ~NU_PDMA_CH_Msk;
     memset(dma_chn_arr, 0x00, sizeof (dma_chn_arr));
 
-    // Reset module
-    SYS_ResetModule(dma_modinit.rsetidx);
-
     // Enable IP clock
     CLK_EnableModuleClock(dma_modinit.clkidx);
 
+    // Reset module
+    SYS_ResetModule(dma_modinit.rsetidx);
+
     /* Check PDMA0. */
     PDMA_T *pdma_base = dma_modbase();
     if (((uint32_t) pdma_base) != PDMA0_BASE) {
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/i2c_api.c b/targets/TARGET_NUVOTON/TARGET_M261/i2c_api.c
index c86b322733..26affe8b90 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/i2c_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/i2c_api.c
@@ -103,14 +103,14 @@ void i2c_init(i2c_t *obj, PinName sda, PinName scl)
     MBED_ASSERT(modinit != NULL);
     MBED_ASSERT(modinit->modname == (int) obj->i2c.i2c);
 
-    // Reset module
-    SYS_ResetModule(modinit->rsetidx);
+    pinmap_pinout(sda, PinMap_I2C_SDA);
+    pinmap_pinout(scl, PinMap_I2C_SCL);
 
     // Select IP clock source
     CLK_EnableModuleClock(modinit->clkidx);
 
-    pinmap_pinout(sda, PinMap_I2C_SDA);
-    pinmap_pinout(scl, PinMap_I2C_SCL);
+    // Reset module
+    SYS_ResetModule(modinit->rsetidx);
 
 #if DEVICE_I2C_ASYNCH
     obj->i2c.dma_usage = DMA_USAGE_NEVER;
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/lp_ticker.c b/targets/TARGET_NUVOTON/TARGET_M261/lp_ticker.c
index 917e48aae2..379b3ef7da 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/lp_ticker.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/lp_ticker.c
@@ -82,12 +82,6 @@ void lp_ticker_init(void)
     }
     ticker_inited = 1;
 
-    /* Reset module
-     *
-     * NOTE: We must call secure version (from non-secure domain) because SYS/CLK regions are secure.
-     */
-    SYS_ResetModule(TIMER_MODINIT.rsetidx);
-
     /* Select IP clock source
      *
      * NOTE: We must call secure version (from non-secure domain) because SYS/CLK regions are secure.
@@ -100,6 +94,12 @@ void lp_ticker_init(void)
      */
     CLK_EnableModuleClock(TIMER_MODINIT.clkidx);
 
+    /* Reset module
+     *
+     * NOTE: We must call secure version (from non-secure domain) because SYS/CLK regions are secure.
+     */
+    SYS_ResetModule(TIMER_MODINIT.rsetidx);
+
     TIMER_T *timer_base = (TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname);
 
     // Configure clock
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/pwmout_api.c b/targets/TARGET_NUVOTON/TARGET_M261/pwmout_api.c
index 249c0ed1ee..5305557186 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/pwmout_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/pwmout_api.c
@@ -69,11 +69,8 @@ void pwmout_init(pwmout_t* obj, PinName pin)
     MBED_ASSERT(modinit != NULL);
     MBED_ASSERT(modinit->modname == (int) obj->pwm);
 
-    // NOTE: All channels (identified by PWMName) share a PWM module. This reset will also affect other channels of the same PWM module.
-    if (! ((struct nu_pwm_var *) modinit->var)->en_msk) {
-        // Reset this module if no channel enabled
-        SYS_ResetModule(modinit->rsetidx);
-    }
+    // Wire pinout
+    pinmap_pinout(pin, PinMap_PWM);
 
     uint32_t chn =  NU_MODSUBINDEX(obj->pwm);
 
@@ -85,8 +82,11 @@ void pwmout_init(pwmout_t* obj, PinName pin)
         CLK_EnableModuleClock(modinit->clkidx);
     }
 
-    // Wire pinout
-    pinmap_pinout(pin, PinMap_PWM);
+    // NOTE: All channels (identified by PWMName) share a PWM module. This reset will also affect other channels of the same PWM module.
+    if (! ((struct nu_pwm_var *) modinit->var)->en_msk) {
+        // Reset this module if no channel enabled
+        SYS_ResetModule(modinit->rsetidx);
+    }
 
     // Default: period = 10 ms, pulse width = 0 ms
     obj->period_us = 1000 * 10;
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/serial_api.c b/targets/TARGET_NUVOTON/TARGET_M261/serial_api.c
index 5252cb04c6..b85feb5d3e 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/serial_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/serial_api.c
@@ -201,16 +201,16 @@ void serial_init(serial_t *obj, PinName tx, PinName rx)
     struct nu_uart_var *var = (struct nu_uart_var *) modinit->var;
 
     if (! var->ref_cnt) {
-        // Reset this module
-        SYS_ResetModule(modinit->rsetidx);
+        pinmap_pinout(tx, PinMap_UART_TX);
+        pinmap_pinout(rx, PinMap_UART_RX);
 
         // Select IP clock source
         CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv);
         // Enable IP clock
         CLK_EnableModuleClock(modinit->clkidx);
 
-        pinmap_pinout(tx, PinMap_UART_TX);
-        pinmap_pinout(rx, PinMap_UART_RX);
+        // Reset this module
+        SYS_ResetModule(modinit->rsetidx);
 
         // Configure baudrate
         int baudrate = 9600;
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/spi_api.c b/targets/TARGET_NUVOTON/TARGET_M261/spi_api.c
index a59288a706..9a89bb03f2 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/spi_api.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/spi_api.c
@@ -141,18 +141,18 @@ void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel
     MBED_ASSERT(modinit != NULL);
     MBED_ASSERT(modinit->modname == (int) obj->spi.spi);
 
-    // Reset this module
-    SYS_ResetModule(modinit->rsetidx);
+    pinmap_pinout(mosi, PinMap_SPI_MOSI);
+    pinmap_pinout(miso, PinMap_SPI_MISO);
+    pinmap_pinout(sclk, PinMap_SPI_SCLK);
+    pinmap_pinout(ssel, PinMap_SPI_SSEL);
 
     // Select IP clock source
     CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv);
     // Enable IP clock
     CLK_EnableModuleClock(modinit->clkidx);
 
-    pinmap_pinout(mosi, PinMap_SPI_MOSI);
-    pinmap_pinout(miso, PinMap_SPI_MISO);
-    pinmap_pinout(sclk, PinMap_SPI_SCLK);
-    pinmap_pinout(ssel, PinMap_SPI_SSEL);
+    // Reset this module
+    SYS_ResetModule(modinit->rsetidx);
 
     obj->spi.pin_mosi = mosi;
     obj->spi.pin_miso = miso;
diff --git a/targets/TARGET_NUVOTON/TARGET_M261/us_ticker.c b/targets/TARGET_NUVOTON/TARGET_M261/us_ticker.c
index 76ca991f4d..f309aa0cd9 100644
--- a/targets/TARGET_NUVOTON/TARGET_M261/us_ticker.c
+++ b/targets/TARGET_NUVOTON/TARGET_M261/us_ticker.c
@@ -57,15 +57,15 @@ void us_ticker_init(void)
     }
     ticker_inited = 1;
 
-    // Reset IP
-    SYS_ResetModule(TIMER_MODINIT.rsetidx);
-
     // Select IP clock source
     CLK_SetModuleClock(TIMER_MODINIT.clkidx, TIMER_MODINIT.clksrc, TIMER_MODINIT.clkdiv);
 
     // Enable IP clock
     CLK_EnableModuleClock(TIMER_MODINIT.clkidx);
 
+    // Reset IP
+    SYS_ResetModule(TIMER_MODINIT.rsetidx);
+
     TIMER_T *timer_base = (TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname);
 
     // Timer for normal counter