ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

* logic added in mbed_overrides.c - for making system initialization (system_init) before usart init. Had issues for clock and buses not getting initialed before serial init. Resolved with the logic. 

* Macro for callback added in usart.h (ASF).
* GPIO mode setting implemented in gpio_api.c
* updated files gpio_object.h ,serial_api.h(tested and working for UART synchronous APIs)
* Reverted settings.py
* Removed unused files in usart (ASF).
pull/1214/head
akhilpanayamparambil 2015-06-16 18:41:13 +05:30 committed by Karthik Purushothaman
parent d6109db325
commit cfffe1371d
10 changed files with 554 additions and 737 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/TARGET_SAMR21G18A/SAMR21_XPLAINED_PRO/mbed_overrides.c
View File

@ -15,14 +15,19 @@
*/
#include "mbed_assert.h"
#include "compiler.h"
#include "system.h"
uint8_t g_sys_init = 0;
//called before main - implement here if board needs it ortherwise, let
// the application override this if necessary
//TODO: To be implemented by adding system init and board init
void mbed_sdk_init()
{
system_init();
if(g_sys_init == 0)
{
g_sys_init = 1;
system_init();
}
}
/***************************************************************/

116
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/sercom/usart/quick_start/qs_usart_basic_use.h
View File

@ -1,116 +0,0 @@
/**
* \file
*
* \brief SAM USART Quick Start
*
* Copyright (C) 2012-2014 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/**
* \page asfdoc_sam0_sercom_usart_basic_use_case Quick Start Guide for SERCOM USART - Basic
*
* This quick start will echo back characters typed into the terminal. In this
* use case the USART will be configured with the following settings:
* - Asynchronous mode
* - 9600 Baudrate
* - 8-bits, No Parity and one Stop Bit
* - TX and RX enabled and connected to the Xplained Pro Embedded Debugger virtual COM port
*
* \section asfdoc_sam0_sercom_usart_basic_use_case_setup Setup
*
* \subsection asfdoc_sam0_sercom_usart_basic_use_case_prereq Prerequisites
* There are no special setup requirements for this use-case.
*
* \subsection asfdoc_sam0_usart_basic_use_case_setup_code Code
* Add to the main application source file, outside of any functions:
* \snippet qs_usart_basic_use.c module_inst
*
* Copy-paste the following setup code to your user application:
* \snippet qs_usart_basic_use.c setup
*
* Add to user application initialization (typically the start of \c main()):
* \snippet qs_usart_basic_use.c setup_init
*
* \subsection asfdoc_sam0_usart_basic_use_case_setup_flow Workflow
* -# Create a module software instance structure for the USART module to store
* the USART driver state while it is in use.
* \snippet qs_usart_basic_use.c module_inst
* \note This should never go out of scope as long as the module is in use.
* In most cases, this should be global.
*
* -# Configure the USART module.
* -# Create a USART module configuration struct, which can be filled out to
* adjust the configuration of a physical USART peripheral.
* \snippet qs_usart_basic_use.c setup_config
* -# Initialize the USART configuration struct with the module's default values.
* \snippet qs_usart_basic_use.c setup_config_defaults
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Alter the USART settings to configure the physical pinout, baudrate, and
* other relevant parameters.
* \snippet qs_usart_basic_use.c setup_change_config
* -# Configure the USART module with the desired settings, retrying while the
* driver is busy until the configuration is stressfully set.
* \snippet qs_usart_basic_use.c setup_set_config
* -# Enable the USART module.
* \snippet qs_usart_basic_use.c setup_enable
*
*
* \section asfdoc_sam0_usart_basic_use_case_main Use Case
*
* \subsection asfdoc_sam0_usart_basic_use_case_main_code Code
* Copy-paste the following code to your user application:
* \snippet qs_usart_basic_use.c main
*
* \subsection asfdoc_sam0_usart_basic_use_case_main_flow Workflow
* -# Send a string to the USART to show the demo is running, blocking until
* all characters have been sent.
* \snippet qs_usart_basic_use.c main_send_string
* -# Enter an infinite loop to continuously echo received values on the USART.
* \snippet qs_usart_basic_use.c main_loop
* -# Perform a blocking read of the USART, storing the received character into
* the previously declared temporary variable.
* \snippet qs_usart_basic_use.c main_read
* -# Echo the received variable back to the USART via a blocking write.
* \snippet qs_usart_basic_use.c main_write
*/
/**
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/

130
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h
View File

@ -1,130 +0,0 @@
/**
* \file
*
* \brief SAM USART Quick Start
*
* Copyright (C) 2012-2014 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/**
* \page asfdoc_sam0_sercom_usart_callback_use_case Quick Start Guide for SERCOM USART - Callback
*
* This quick start will echo back characters typed into the terminal, using
* asynchronous TX and RX callbacks from the USART peripheral. In this use case
* the USART will be configured with the following settings:
* - Asynchronous mode
* - 9600 Baudrate
* - 8-bits, No Parity and one Stop Bit
* - TX and RX enabled and connected to the Xplained Pro Embedded Debugger virtual COM port
*
* \section asfdoc_sam0_sercom_usart_callback_use_case_setup Setup
*
* \subsection asfdoc_sam0_sercom_usart_callback_use_case_prereq Prerequisites
* There are no special setup requirements for this use-case.
*
* \subsection asfdoc_sam0_usart_callback_use_case_setup_code Code
* Add to the main application source file, outside of any functions:
* \snippet qs_usart_callback.c module_inst
* \snippet qs_usart_callback.c rx_buffer_var
*
* Copy-paste the following callback function code to your user application:
* \snippet qs_usart_callback.c callback_funcs
*
* Copy-paste the following setup code to your user application:
* \snippet qs_usart_callback.c setup
*
* Add to user application initialization (typically the start of \c main()):
* \snippet qs_usart_callback.c setup_init
*
* \subsection asfdoc_sam0_usart_callback_use_case_setup_flow Workflow
* -# Create a module software instance structure for the USART module to store
* the USART driver state while it is in use.
* \snippet qs_usart_callback.c module_inst
* \note This should never go out of scope as long as the module is in use.
* In most cases, this should be global.
*
* -# Configure the USART module.
* -# Create a USART module configuration struct, which can be filled out to
* adjust the configuration of a physical USART peripheral.
* \snippet qs_usart_callback.c setup_config
* -# Initialize the USART configuration struct with the module's default values.
* \snippet qs_usart_callback.c setup_config_defaults
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Alter the USART settings to configure the physical pinout, baudrate, and
* other relevant parameters.
* \snippet qs_usart_callback.c setup_change_config
* -# Configure the USART module with the desired settings, retrying while the
* driver is busy until the configuration is stressfully set.
* \snippet qs_usart_callback.c setup_set_config
* -# Enable the USART module.
* \snippet qs_usart_callback.c setup_enable
* -# Configure the USART callbacks.
* -# Register the TX and RX callback functions with the driver.
* \snippet qs_usart_callback.c setup_register_callbacks
* -# Enable the TX and RX callbacks so that they will be called by the driver
* when appropriate.
* \snippet qs_usart_callback.c setup_enable_callbacks
*
* \section asfdoc_sam0_usart_callback_use_case_main Use Case
*
* \subsection asfdoc_sam0_usart_callback_use_case_main_code Code
* Copy-paste the following code to your user application:
* \snippet qs_usart_callback.c main
*
* \subsection asfdoc_sam0_usart_callback_use_case_main_flow Workflow
* -# Enable global interrupts, so that the callbacks can be fired.
* \snippet qs_usart_callback.c enable_global_interrupts
* -# Send a string to the USART to show the demo is running, blocking until
* all characters have been sent.
* \snippet qs_usart_callback.c main_send_string
* -# Enter an infinite loop to continuously echo received values on the USART.
* \snippet qs_usart_callback.c main_loop
* -# Perform an asynchronous read of the USART, which will fire the registered
* callback when characters are received.
* \snippet qs_usart_callback.c main_read
*/
/**
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#include <asf.h>
#include <conf_clocks.h>

214
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h
View File

@ -1,214 +0,0 @@
/**
* \file
*
* \brief SAM D21/R21/D10/D11 Quick Start Guide for Using Usart driver with DMA
*
* Copyright (C) 2014 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/**
* \page asfdoc_sam0_sercom_usart_dma_use_case Quick Start Guide for Using DMA with SERCOM USART
*
* The supported board list:
* - SAML21 Xplained Pro
* - SAMD21 Xplained Pro
* - SAMR21 Xplained Pro
* - SAMD11 Xplained Pro
*
* This quick start will receiving eight bytes of data from PC terminal and transmit back the string
* to the terminal through DMA. In this use case the USART will be configured with the following
* settings:
* - Asynchronous mode
* - 9600 Baudrate
* - 8-bits, No Parity and one Stop Bit
* - TX and RX enabled and connected to the Xplained Pro Embedded Debugger virtual COM port
*
* \section asfdoc_sam0_sercom_usart_dma_use_case_setup Setup
*
* \subsection asfdoc_sam0_sercom_usart_dma_use_case_prereq Prerequisites
* There are no special setup requirements for this use-case.
*
* \subsection asfdoc_sam0_usart_dma_use_case_setup_code Code
* Add to the main application source file, outside of any functions:
* \snippet qs_usart_dma_use.c module_inst
* \snippet qs_usart_dma_use.c dma_resource
* \snippet qs_usart_dma_use.c usart_buffer
* \snippet qs_usart_dma_use.c transfer_descriptor
*
* Copy-paste the following setup code to your user application:
* \snippet qs_usart_dma_use.c setup
*
* Add to user application initialization (typically the start of \c main()):
* \snippet qs_usart_dma_use.c setup_init
*
* \subsection asfdoc_sam0_usart_dma_use_case_setup_flow Workflow
*
* \subsubsection asfdoc_sam0_usart_dma_use_case_setup_flow_inst Create variables
* -# Create a module software instance structure for the USART module to store
* the USART driver state while it is in use.
* \snippet qs_usart_dma_use.c module_inst
* \note This should never go out of scope as long as the module is in use.
* In most cases, this should be global.
*
* -# Create module software instance structures for DMA resources to store
* the DMA resource state while it is in use.
* \snippet qs_usart_dma_use.c dma_resource
* \note This should never go out of scope as long as the module is in use.
* In most cases, this should be global.
*
* -# Create a buffer to store the data to be transferred /received.
* \snippet qs_usart_dma_use.c usart_buffer
* -# Create DMA transfer descriptors for RX/TX.
* \snippet qs_usart_dma_use.c transfer_descriptor
*
* \subsubsection asfdoc_sam0_usart_dma_use_case_setup_flow_usart Configure the USART
* -# Create a USART module configuration struct, which can be filled out to
* adjust the configuration of a physical USART peripheral.
* \snippet qs_usart_dma_use.c setup_config
* -# Initialize the USART configuration struct with the module's default values.
* \snippet qs_usart_dma_use.c setup_config_defaults
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Alter the USART settings to configure the physical pinout, baudrate, and
* other relevant parameters.
* \snippet qs_usart_dma_use.c setup_change_config
* -# Configure the USART module with the desired settings, retrying while the
* driver is busy until the configuration is stressfully set.
* \snippet qs_usart_dma_use.c setup_set_config
* -# Enable the USART module.
* \snippet qs_usart_dma_use.c setup_enable
*
* \subsubsection asfdoc_sam0_usart_dma_use_case_setup_flow_dma Configure DMA
* -# Create a callback function of receiver done.
* \snippet qs_usart_dma_use.c transfer_done_rx
*
* -# Create a callback function of transmission done.
* \snippet qs_usart_dma_use.c transfer_done_tx
*
* -# Create a DMA resource configuration structure, which can be filled out to
* adjust the configuration of a single DMA transfer.
* \snippet qs_usart_dma_use.c setup_rx_1
*
* -# Initialize the DMA resource configuration struct with the module's
* default values.
* \snippet qs_usart_dma_use.c setup_rx_2
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Set extra configurations for the DMA resource. It is using peripheral
* trigger. SERCOM TX empty trigger causes a beat transfer in
* this example.
* \snippet qs_usart_dma_use.c setup_rx_3
*
* -# Allocate a DMA resource with the configurations.
* \snippet qs_usart_dma_use.c setup_rx_4
*
* -# Create a DMA transfer descriptor configuration structure, which can be
* filled out to adjust the configuration of a single DMA transfer.
* \snippet qs_usart_dma_use.c setup_rx_5
*
* -# Initialize the DMA transfer descriptor configuration struct with the module's
* default values.
* \snippet qs_usart_dma_use.c setup_rx_6
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Set the specific parameters for a DMA transfer with transfer size, source
* address, and destination address.
* \snippet qs_usart_dma_use.c setup_rx_7
*
* -# Create the DMA transfer descriptor.
* \snippet qs_usart_dma_use.c setup_rx_8
*
* -# Create a DMA resource configuration structure for TX, which can be filled
* out to adjust the configuration of a single DMA transfer.
* \snippet qs_usart_dma_use.c setup_tx_1
*
* -# Initialize the DMA resource configuration struct with the module's
* default values.
* \snippet qs_usart_dma_use.c setup_tx_2
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Set extra configurations for the DMA resource. It is using peripheral
* trigger. SERCOM RX Ready trigger causes a beat transfer in
* this example.
* \snippet qs_usart_dma_use.c setup_tx_3
*
* -# Allocate a DMA resource with the configurations.
* \snippet qs_usart_dma_use.c setup_tx_4
*
* -# Create a DMA transfer descriptor configuration structure, which can be
* filled out to adjust the configuration of a single DMA transfer.
* \snippet qs_usart_dma_use.c setup_tx_5
*
* -# Initialize the DMA transfer descriptor configuration struct with the module's
* default values.
* \snippet qs_usart_dma_use.c setup_tx_6
* \note This should always be performed before using the configuration
* struct to ensure that all values are initialized to known default
* settings.
*
* -# Set the specific parameters for a DMA transfer with transfer size, source
* address, and destination address.
* \snippet qs_usart_dma_use.c setup_tx_7
*
* -# Create the DMA transfer descriptor.
* \snippet qs_usart_dma_use.c setup_tx_8
*
* \section asfdoc_sam0_usart_dma_use_case_main Use Case
*
* \subsection asfdoc_sam0_usart_dma_use_case_main_code Code
* Copy-paste the following code to your user application:
* \snippet qs_usart_dma_use.c main
*
* \subsection asfdoc_sam0_usart_dma_use_case_main_flow Workflow
* -# Wait for receiving data.
* \snippet qs_usart_dma_use.c main_1
*
* -# Enter endless loop.
* \snippet qs_usart_dma_use.c endless_loop
*/
/**
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/

2
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/sercom/usart/usart.h
View File

@ -256,6 +256,8 @@
#include <sercom.h>
#include <pinmux.h>
#define USART_CALLBACK_MODE true
#if USART_CALLBACK_MODE == true
# include <sercom_interrupt.h>
#endif

43
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/gpio_api.c
View File

@ -20,10 +20,6 @@
#include "compiler.h"
#include "port.h"
void pin_mode(PinName pin, PinMode mode) { // Kept as dummy function. configuration settings already taken care in gpio_dir function
MBED_ASSERT(pin != (PinName)NC);
}
uint32_t gpio_set(PinName pin) {
MBED_ASSERT(pin != (PinName)NC);
return (1UL << (pin % 32));
@ -41,6 +37,8 @@ void gpio_init(gpio_t *obj, PinName pin) {
obj->mask = gpio_set(pin);
port_get_config_defaults(&pin_conf);
obj->powersave = pin_conf.powersave;
obj->direction = PORT_PIN_DIR_INPUT;
obj->mode = PORT_PIN_PULL_UP;
port_pin_set_config(pin, &pin_conf);
obj->OUTCLR = &port_base->OUTCLR.reg;
@ -49,24 +47,43 @@ void gpio_init(gpio_t *obj, PinName pin) {
}
void gpio_mode(gpio_t *obj, PinMode mode) {
pin_mode(obj->pin, mode);
MBED_ASSERT(obj->pin != (PinName)NC);
struct port_config pin_conf;
obj->mode = mode;
pin_conf.direction = obj->direction;
pin_conf.powersave = obj->powersave;
switch (mode) {
case PullNone :
pin_conf.input_pull = PORT_PIN_PULL_NONE;
break;
case PullUp:
pin_conf.input_pull = PORT_PIN_PULL_UP;
break;
case PullDown:
pin_conf.input_pull = PORT_PIN_PULL_DOWN;
break;
}
port_pin_set_config(obj->pin, &pin_conf);
}
void gpio_dir(gpio_t *obj, PinDirection direction) {
MBED_ASSERT(obj->pin != (PinName)NC);
struct port_config pin_conf;
port_get_config_defaults(&pin_conf);
obj->direction = direction;
pin_conf.input_pull = obj->mode;
pin_conf.powersave = obj->powersave;
switch (direction) {
case PIN_INPUT :
pin_conf.direction = PORT_PIN_DIR_INPUT;
pin_conf.input_pull = PORT_PIN_PULL_UP;
break;
pin_conf.direction = PORT_PIN_DIR_INPUT;
break;
case PIN_OUTPUT:
pin_conf.direction = PORT_PIN_DIR_OUTPUT;
break;
pin_conf.direction = PORT_PIN_DIR_OUTPUT;
break;
case PIN_INPUT_OUTPUT:
pin_conf.direction = PORT_PIN_DIR_OUTPUT;
break;
pin_conf.direction = PORT_PIN_DIR_OUTPUT_WTH_READBACK;
break;
}
port_pin_set_config(obj->pin, &pin_conf);
}

4
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/gpio_object.h
View File

@ -26,7 +26,9 @@ typedef struct {
PinName pin;
uint32_t mask;
uint8_t powersave;
uint8_t mode;
uint8_t direction;
__IO uint32_t *OUTCLR;
__IO uint32_t *OUTSET;
__I uint32_t *IN;

25
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/objects.h
View File

@ -41,8 +41,29 @@ struct port_s {
};
struct serial_s {
SercomUsart *uart;
int index;
Sercom *usart;
uint32_t index;
uint32_t data_order;
uint32_t transfer_mode;
uint32_t parity;
uint32_t stopbits;
uint32_t character_size;
uint32_t mux_setting;
uint32_t sample_rate;
uint32_t sample_adjustment;
uint8_t start_frame_detection_enable;
uint32_t baudrate;
uint32_t receiver_enable;
uint32_t transmitter_enable;
uint32_t clock_polarity_inverted;
uint8_t use_external_clock;
uint32_t ext_clock_freq;
uint8_t run_in_standby;
uint32_t generator_source;
uint32_t pinmux_pad0;
uint32_t pinmux_pad1;
uint32_t pinmux_pad2;
uint32_t pinmux_pad3;
};
/*
struct pwmout_s {

746
libraries/mbed/targets/hal/TARGET_Atmel/TARGET_SAM21/serial_api.c
View File

@ -13,43 +13,94 @@
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <string.h>
#include "mbed_assert.h"
#include "cmsis.h"
#include "serial_api.h"
#include <string.h>
#include "pinmap.h"
#include "PeripheralPins.h"
#include "usart.h"
#include "usart_interrupt.h"
#include "samr21_xplained_pro.h"
#define UART_NUM 1 // for SAMR21 // to be updated for samd21
#define _USART(obj) obj->usart->USART
#define USART_NUM 1 // for SAMR21 // to be updated for samd21
//#define USART_BUF 8
struct usart_module usart_instance;
static uint32_t serial_irq_ids[UART_NUM] = {0};
static uint32_t serial_irq_ids[USART_NUM] = {0};
static uart_irq_handler irq_handler;
int stdio_uart_inited = 0;
serial_t stdio_uart;
/**
* \internal
* Set Configuration of the USART module
*/
static enum status_code _usart_set_config(
struct usart_module *const module,
const struct usart_config *const config)
/*struct serial_global_data_s{
uint8_t string[USART_BUF];
uint8_t count;
};
static struct serial_global_data_s uart_data[USART_NUM];*/
extern uint8_t g_sys_init;
static inline bool usart_syncing(serial_t *obj)
{
/* Sanity check arguments */
Assert(module);
Assert(module->hw);
/* Sanity check arguments */
MBED_ASSERT(obj);
/* Get a pointer to the hardware module instance */
SercomUsart *const usart_hw = &(module->hw->USART);
return (_USART(obj).SYNCBUSY.reg);
}
/* Index for generic clock */
uint32_t sercom_index = _sercom_get_sercom_inst_index(module->hw);
static inline void enable_usart(serial_t *obj)
{
/* Sanity check arguments */
MBED_ASSERT(obj);
#if USART_CALLBACK_MODE == true //TODO: to be implemented
/* Enable Global interrupt for module */
system_interrupt_enable(_sercom_get_interrupt_vector(obj->usart));
#endif
/* Wait until synchronization is complete */
usart_syncing(obj);
/* Enable USART module */
_USART(obj).CTRLA.reg |= SERCOM_USART_CTRLA_ENABLE;
}
static inline void disable_usart(serial_t *obj)
{
/* Sanity check arguments */
MBED_ASSERT(obj);
#if USART_CALLBACK_MODE == true //TODO: to be implemented
/* Disable Global interrupt for module */
system_interrupt_disable(_sercom_get_interrupt_vector(obj->usart));
#endif
/* Wait until synchronization is complete */
usart_syncing(obj);
/* Disable USART module */
_USART(obj).CTRLA.reg &= ~SERCOM_USART_CTRLA_ENABLE;
}
static inline void reset_usart(serial_t *obj)
{
/* Sanity check arguments */
MBED_ASSERT(obj);
disable_usart(obj);
/* Wait until synchronization is complete */
usart_syncing(obj);
/* Reset module */
_USART(obj).CTRLA.reg = SERCOM_USART_CTRLA_SWRST;
}
static enum status_code usart_set_config_asf( serial_t *obj)
{
/* Index for generic clock */
uint32_t sercom_index = _sercom_get_sercom_inst_index(obj->usart);
uint32_t gclk_index = sercom_index + SERCOM0_GCLK_ID_CORE;
/* Cache new register values to minimize the number of register writes */
@ -60,92 +111,48 @@ static enum status_code _usart_set_config(
enum sercom_asynchronous_operation_mode mode = SERCOM_ASYNC_OPERATION_MODE_ARITHMETIC;
enum sercom_asynchronous_sample_num sample_num = SERCOM_ASYNC_SAMPLE_NUM_16;
#ifdef FEATURE_USART_OVER_SAMPLE
switch (config->sample_rate) {
case USART_SAMPLE_RATE_16X_ARITHMETIC:
mode = SERCOM_ASYNC_OPERATION_MODE_ARITHMETIC;
sample_num = SERCOM_ASYNC_SAMPLE_NUM_16;
break;
case USART_SAMPLE_RATE_8X_ARITHMETIC:
mode = SERCOM_ASYNC_OPERATION_MODE_ARITHMETIC;
sample_num = SERCOM_ASYNC_SAMPLE_NUM_8;
break;
case USART_SAMPLE_RATE_3X_ARITHMETIC:
mode = SERCOM_ASYNC_OPERATION_MODE_ARITHMETIC;
sample_num = SERCOM_ASYNC_SAMPLE_NUM_3;
break;
case USART_SAMPLE_RATE_16X_FRACTIONAL:
mode = SERCOM_ASYNC_OPERATION_MODE_FRACTIONAL;
sample_num = SERCOM_ASYNC_SAMPLE_NUM_16;
break;
case USART_SAMPLE_RATE_8X_FRACTIONAL:
mode = SERCOM_ASYNC_OPERATION_MODE_FRACTIONAL;
sample_num = SERCOM_ASYNC_SAMPLE_NUM_8;
break;
}
#endif
/* Set data order, internal muxing, and clock polarity */
ctrla = (uint32_t)config->data_order |
(uint32_t)config->mux_setting |
ctrla = (uint32_t)obj->data_order |
(uint32_t)obj->mux_setting |
#ifdef FEATURE_USART_OVER_SAMPLE
config->sample_adjustment |
config->sample_rate |
obj->sample_adjustment |
obj->sample_rate |
#endif
#ifdef FEATURE_USART_IMMEDIATE_BUFFER_OVERFLOW_NOTIFICATION
(config->immediate_buffer_overflow_notification << SERCOM_USART_CTRLA_IBON_Pos) |
#endif
(config->clock_polarity_inverted << SERCOM_USART_CTRLA_CPOL_Pos);
enum status_code status_code = STATUS_OK;
(obj->clock_polarity_inverted << SERCOM_USART_CTRLA_CPOL_Pos);
/* Get baud value from mode and clock */
switch (config->transfer_mode)
switch (obj->transfer_mode)
{
case USART_TRANSFER_SYNCHRONOUSLY:
if (!config->use_external_clock) {
status_code = _sercom_get_sync_baud_val(config->baudrate,
if (!obj->use_external_clock) {
_sercom_get_sync_baud_val(obj->baudrate,
system_gclk_chan_get_hz(gclk_index), &baud);
}
break;
case USART_TRANSFER_ASYNCHRONOUSLY:
if (config->use_external_clock) {
status_code =
_sercom_get_async_baud_val(config->baudrate,
config->ext_clock_freq, &baud, mode, sample_num);
if (obj->use_external_clock) {
_sercom_get_async_baud_val(obj->baudrate,
obj->ext_clock_freq, &baud, mode, sample_num);
} else {
status_code =
_sercom_get_async_baud_val(config->baudrate,
_sercom_get_async_baud_val(obj->baudrate,
system_gclk_chan_get_hz(gclk_index), &baud, mode, sample_num);
}
break;
}
/* Check if calculating the baudrate failed */
if (status_code != STATUS_OK) {
/* Abort */
return status_code;
}
#ifdef FEATURE_USART_IRDA
if(config->encoding_format_enable) {
usart_hw->RXPL.reg = config->receive_pulse_length;
}
#endif
/* Wait until synchronization is complete */
_usart_wait_for_sync(module);
usart_syncing(obj);
/*Set baud val */
usart_hw->BAUD.reg = baud;
_USART(obj).BAUD.reg = baud;
/* Set sample mode */
ctrla |= config->transfer_mode;
ctrla |= obj->transfer_mode;
if (config->use_external_clock == false) {
if (obj->use_external_clock == false) {
ctrla |= SERCOM_USART_CTRLA_MODE(0x1);
}
else {
@ -153,140 +160,122 @@ static enum status_code _usart_set_config(
}
/* Set stopbits, character size and enable transceivers */
ctrlb = (uint32_t)config->stopbits | (uint32_t)config->character_size |
#ifdef FEATURE_USART_IRDA
(config->encoding_format_enable << SERCOM_USART_CTRLB_ENC_Pos) |
#endif
ctrlb = (uint32_t)obj->stopbits | (uint32_t)obj->character_size |
#ifdef FEATURE_USART_START_FRAME_DECTION
(config->start_frame_detection_enable << SERCOM_USART_CTRLB_SFDE_Pos) |
(obj->start_frame_detection_enable << SERCOM_USART_CTRLB_SFDE_Pos) |
#endif
#ifdef FEATURE_USART_COLLISION_DECTION
(config->collision_detection_enable << SERCOM_USART_CTRLB_COLDEN_Pos) |
#endif
(config->receiver_enable << SERCOM_USART_CTRLB_RXEN_Pos) |
(config->transmitter_enable << SERCOM_USART_CTRLB_TXEN_Pos);
(obj->receiver_enable << SERCOM_USART_CTRLB_RXEN_Pos) |
(obj->transmitter_enable << SERCOM_USART_CTRLB_TXEN_Pos);
/* Check parity mode bits */
if (config->parity != USART_PARITY_NONE) {
#ifdef FEATURE_USART_LIN_SLAVE
if(config->lin_slave_enable) {
ctrla |= SERCOM_USART_CTRLA_FORM(0x5);
} else {
ctrla |= SERCOM_USART_CTRLA_FORM(1);
}
#else
if (obj->parity != USART_PARITY_NONE) {
ctrla |= SERCOM_USART_CTRLA_FORM(1);
#endif
ctrlb |= config->parity;
ctrlb |= obj->parity;
} else {
#ifdef FEATURE_USART_LIN_SLAVE
if(config->lin_slave_enable) {
ctrla |= SERCOM_USART_CTRLA_FORM(0x4);
} else {
ctrla |= SERCOM_USART_CTRLA_FORM(0);
}
#else
ctrla |= SERCOM_USART_CTRLA_FORM(0);
#endif
}
/* Set whether module should run in standby. */
if (config->run_in_standby || system_is_debugger_present()) {
if (obj->run_in_standby || system_is_debugger_present()) {
ctrla |= SERCOM_USART_CTRLA_RUNSTDBY;
}
/* Wait until synchronization is complete */
_usart_wait_for_sync(module);
usart_syncing(obj);
/* Write configuration to CTRLB */
usart_hw->CTRLB.reg = ctrlb;
_USART(obj).CTRLB.reg = ctrlb;
/* Wait until synchronization is complete */
_usart_wait_for_sync(module);
usart_syncing(obj);
/* Write configuration to CTRLA */
usart_hw->CTRLA.reg = ctrla;
_USART(obj).CTRLA.reg = ctrla;
return STATUS_OK;
}
void serial_init(serial_t *obj, PinName tx, PinName rx) {
struct usart_config config_usart;
if (g_sys_init == 0) {
system_init();
g_sys_init = 1;
}
struct system_gclk_chan_config gclk_chan_conf;
uint32_t gclk_index;
uint32_t pm_index;
uint32_t sercom_index = 0; // index 0 for SERCOM0
enum status_code status_code = STATUS_OK;
uint32_t sercom_index = 0;
usart_get_config_defaults(&config_usart); // get default configuration setting used below
obj->usart = EXT1_UART_MODULE;
config_usart.baudrate = 9600; // setting default configurations for SERCOM0 serial
config_usart.mux_setting = EDBG_CDC_SERCOM_MUX_SETTING;
config_usart.pinmux_pad0 = EDBG_CDC_SERCOM_PINMUX_PAD0;
config_usart.pinmux_pad1 = EDBG_CDC_SERCOM_PINMUX_PAD1;
config_usart.pinmux_pad2 = EDBG_CDC_SERCOM_PINMUX_PAD2;
config_usart.pinmux_pad3 = EDBG_CDC_SERCOM_PINMUX_PAD3;
/* Disable USART module */
disable_usart(obj);
/* Set default config to object */
obj->data_order = USART_DATAORDER_LSB;
obj->transfer_mode = USART_TRANSFER_ASYNCHRONOUSLY;
obj->parity = USART_PARITY_NONE;
obj->stopbits = USART_STOPBITS_1;
obj->character_size = USART_CHARACTER_SIZE_8BIT;
obj->baudrate = 9600;
obj->receiver_enable = true;
obj->transmitter_enable = true;
obj->clock_polarity_inverted = false;
obj->use_external_clock = false;
obj->ext_clock_freq = 0;
obj->mux_setting = USART_RX_1_TX_2_XCK_3;
obj->run_in_standby = false;
obj->generator_source = GCLK_GENERATOR_0;
obj->pinmux_pad0 = PINMUX_DEFAULT;
obj->pinmux_pad1 = PINMUX_DEFAULT;
obj->pinmux_pad2 = PINMUX_DEFAULT;
obj->pinmux_pad3 = PINMUX_DEFAULT;
obj->start_frame_detection_enable = false;
obj->mux_setting = EDBG_CDC_SERCOM_MUX_SETTING; // to be done according to the pin received from user
obj->pinmux_pad0 = EDBG_CDC_SERCOM_PINMUX_PAD0;
obj->pinmux_pad1 = EDBG_CDC_SERCOM_PINMUX_PAD1;
obj->pinmux_pad2 = EDBG_CDC_SERCOM_PINMUX_PAD2;
obj->pinmux_pad3 = EDBG_CDC_SERCOM_PINMUX_PAD3;
//TODO: now noly UART0. code to get the SERCOM instance from Pins (pinmapping) to be added later
UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
obj->uart = (SercomUsart *)uart;
usart_instance.hw = (Sercom *)uart;
pm_index = sercom_index + PM_APBCMASK_SERCOM0_Pos;
gclk_index = sercom_index + SERCOM0_GCLK_ID_CORE;
sercom_index = _sercom_get_sercom_inst_index(obj->usart);
pm_index = sercom_index + PM_APBCMASK_SERCOM0_Pos;
gclk_index = sercom_index + SERCOM0_GCLK_ID_CORE;
if (obj->uart->CTRLA.reg & SERCOM_USART_CTRLA_SWRST) {
if (_USART(obj).CTRLA.reg & SERCOM_USART_CTRLA_SWRST) {
/* The module is busy resetting itself */
return;
}
if (obj->uart->CTRLA.reg & SERCOM_USART_CTRLA_ENABLE) {
if (_USART(obj).CTRLA.reg & SERCOM_USART_CTRLA_ENABLE) {
/* Check the module is enabled */
return;
}
/* Turn on module in PM */
system_apb_clock_set_mask(SYSTEM_CLOCK_APB_APBC, 1 << pm_index);
/* Set up the GCLK for the module */
system_gclk_chan_get_config_defaults(&gclk_chan_conf);
gclk_chan_conf.source_generator = config_usart.generator_source;
obj->generator_source = GCLK_GENERATOR_0;
gclk_chan_conf.source_generator = obj->generator_source;
system_gclk_chan_set_config(gclk_index, &gclk_chan_conf);
system_gclk_chan_enable(gclk_index);
sercom_set_gclk_generator(config_usart.generator_source, false);
/* Set character size */
usart_instance.character_size = config_usart.character_size;
/* Set transmitter and receiver status */
usart_instance.receiver_enabled = config_usart.receiver_enable;
usart_instance.transmitter_enabled = config_usart.transmitter_enable;
#ifdef FEATURE_USART_LIN_SLAVE
usart_instance.lin_slave_enabled = config_usart.lin_slave_enable;
#endif
#ifdef FEATURE_USART_START_FRAME_DECTION
usart_instance.start_frame_detection_enabled = config_usart.start_frame_detection_enable;
#endif
/* Set configuration according to the config struct */
status_code = _usart_set_config(&usart_instance, &config_usart);
if(status_code != STATUS_OK) {
return;
}
sercom_set_gclk_generator(obj->generator_source, false);
/* Set configuration according to the config struct */
usart_set_config_asf(obj);
struct system_pinmux_config pin_conf;
system_pinmux_get_config_defaults(&pin_conf);
pin_conf.direction = SYSTEM_PINMUX_PIN_DIR_INPUT;
pin_conf.input_pull = SYSTEM_PINMUX_PIN_PULL_NONE;
uint32_t pad_pinmuxes[] = {
config_usart.pinmux_pad0, config_usart.pinmux_pad1,
config_usart.pinmux_pad2, config_usart.pinmux_pad3
obj->pinmux_pad0, obj->pinmux_pad1,
obj->pinmux_pad2, obj->pinmux_pad3
};
/* Configure the SERCOM pins according to the user configuration */
@ -294,7 +283,7 @@ void serial_init(serial_t *obj, PinName tx, PinName rx) {
uint32_t current_pinmux = pad_pinmuxes[pad];
if (current_pinmux == PINMUX_DEFAULT) {
current_pinmux = _sercom_get_default_pad(usart_instance.hw, pad);
current_pinmux = _sercom_get_default_pad(obj->usart, pad);
}
if (current_pinmux != PINMUX_UNUSED) {
@ -308,111 +297,195 @@ void serial_init(serial_t *obj, PinName tx, PinName rx) {
memcpy(&stdio_uart, obj, sizeof(serial_t));
}
system_interrupt_enable(_sercom_get_interrupt_vector(usart_instance.hw));
/* Wait until synchronization is complete */
_usart_wait_for_sync(&usart_instance);
usart_syncing(obj);
/* Enable USART module */
obj->uart->CTRLA.reg |= SERCOM_USART_CTRLA_ENABLE;
enable_usart(obj);
/* usart_get_config_defaults(&config_usart);
config_usart.baudrate = 9600;
config_usart.mux_setting = EDBG_CDC_SERCOM_MUX_SETTING;
config_usart.pinmux_pad0 = EDBG_CDC_SERCOM_PINMUX_PAD0;
config_usart.pinmux_pad1 = EDBG_CDC_SERCOM_PINMUX_PAD1;
config_usart.pinmux_pad2 = EDBG_CDC_SERCOM_PINMUX_PAD2;
config_usart.pinmux_pad3 = EDBG_CDC_SERCOM_PINMUX_PAD3;
while (usart_init(&usart_instance,
EDBG_CDC_MODULE, &config_usart) != STATUS_OK) {
}*/
}
/*
void serial_free(serial_t *obj) {
serial_irq_ids[obj->index] = 0;
}*/
}
void serial_baud(serial_t *obj, int baudrate) {
/* struct usart_config config_usart;
MBED_ASSERT((baudrate == 110) || (baudrate == 150) || (baudrate == 300) || (baudrate == 1200) ||
(baudrate == 2400) || (baudrate == 4800) || (baudrate == 9600) || (baudrate == 19200) || (baudrate == 38400) ||
(baudrate == 57600) || (baudrate == 115200) || (baudrate == 230400) || (baudrate == 460800) || (baudrate == 921600) );
struct system_gclk_chan_config gclk_chan_conf;
uint32_t gclk_index;
uint16_t baud = 0;
uint32_t sercom_index = 0;
enum sercom_asynchronous_operation_mode mode = SERCOM_ASYNC_OPERATION_MODE_ARITHMETIC;
enum sercom_asynchronous_sample_num sample_num = SERCOM_ASYNC_SAMPLE_NUM_16;
usart_get_config_defaults(&config_usart);
config_usart.baudrate = baudrate;
while (usart_init(&usart_instance,
EDBG_CDC_MODULE, &config_usart) != STATUS_OK) {
}*/
obj->baudrate = baudrate;
disable_usart(obj);
sercom_index = _sercom_get_sercom_inst_index(obj->usart);
gclk_index = sercom_index + SERCOM0_GCLK_ID_CORE;
obj->generator_source = GCLK_GENERATOR_0;
gclk_chan_conf.source_generator = obj->generator_source;
system_gclk_chan_set_config(gclk_index, &gclk_chan_conf);
system_gclk_chan_enable(gclk_index);
sercom_set_gclk_generator(obj->generator_source, false);
/* Get baud value from mode and clock */
switch (obj->transfer_mode)
{
case USART_TRANSFER_SYNCHRONOUSLY:
if (!obj->use_external_clock) {
_sercom_get_sync_baud_val(obj->baudrate,
system_gclk_chan_get_hz(gclk_index), &baud);
}
break;
case USART_TRANSFER_ASYNCHRONOUSLY:
if (obj->use_external_clock) {
_sercom_get_async_baud_val(obj->baudrate,
obj->ext_clock_freq, &baud, mode, sample_num);
} else {
_sercom_get_async_baud_val(obj->baudrate,
system_gclk_chan_get_hz(gclk_index), &baud, mode, sample_num);
}
break;
}
/* Wait until synchronization is complete */
usart_syncing(obj);
/*Set baud val */
_USART(obj).BAUD.reg = baud;
/* Wait until synchronization is complete */
usart_syncing(obj);
enable_usart(obj);
}
void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
/* struct usart_config config_usart;
MBED_ASSERT((stop_bits == 1) || (stop_bits == 2));
MBED_ASSERT((parity == ParityNone) || (parity == ParityOdd) || (parity == ParityEven));
MBED_ASSERT((data_bits == 5) || (data_bits == 6) || (data_bits == 7) || (data_bits == 8) || (data_bits == 9));
MBED_ASSERT((data_bits == 5) || (data_bits == 6) || (data_bits == 7) || (data_bits == 8) /*|| (data_bits == 9)*/);
/* Cache new register values to minimize the number of register writes */
uint32_t ctrla = 0;
uint32_t ctrlb = 0;
usart_get_config_defaults(&config_usart);
disable_usart(obj);
ctrla = _USART(obj).CTRLA.reg;
ctrlb = _USART(obj).CTRLB.reg;
ctrla &= ~(SERCOM_USART_CTRLA_FORM_Msk);
ctrlb &= ~(SERCOM_USART_CTRLB_CHSIZE_Msk);
ctrlb &= ~(SERCOM_USART_CTRLB_SBMODE);
ctrlb &= ~(SERCOM_USART_CTRLB_PMODE);
switch (stop_bits){
case 1:
config_usart.stopbits = USART_STOPBITS_1;
obj->stopbits = USART_STOPBITS_1;
break;
case 2:
config_usart.stopbits = USART_STOPBITS_2;
obj->stopbits = USART_STOPBITS_2;
break;
default:
config_usart.stopbits = USART_STOPBITS_1;
obj->stopbits = USART_STOPBITS_1;
}
switch (parity){
case ParityNone:
config_usart.parity = USART_PARITY_NONE;
obj->parity = USART_PARITY_NONE;
break;
case ParityOdd:
config_usart.parity = USART_PARITY_ODD;
obj->parity = USART_PARITY_ODD;
break;
case ParityEven:
config_usart.parity = USART_PARITY_EVEN;
obj->parity = USART_PARITY_EVEN;
break;
default:
config_usart.parity = USART_PARITY_NONE;
obj->parity = USART_PARITY_NONE;
}
switch (data_bits){
case 5:
config_usart.character_size = USART_CHARACTER_SIZE_5BIT;
obj->character_size = USART_CHARACTER_SIZE_5BIT;
break;
case 6:
config_usart.character_size = USART_CHARACTER_SIZE_6BIT;
obj->character_size = USART_CHARACTER_SIZE_6BIT;
break;
case 7:
config_usart.character_size = USART_CHARACTER_SIZE_7BIT;
obj->character_size = USART_CHARACTER_SIZE_7BIT;
break;
case 8:
config_usart.character_size = USART_CHARACTER_SIZE_8BIT;
break;
case 9:
config_usart.character_size = USART_CHARACTER_SIZE_9BIT;
obj->character_size = USART_CHARACTER_SIZE_8BIT;
break;
/*case 9:
obj->character_size = USART_CHARACTER_SIZE_9BIT;
break;*/
default:
config_usart.character_size = USART_CHARACTER_SIZE_8BIT;
obj->character_size = USART_CHARACTER_SIZE_8BIT;
}
while (usart_init(&usart_instance,
EDBG_CDC_MODULE, &config_usart) != STATUS_OK) {
}*/
/* Set stopbits, character size and enable transceivers */
ctrlb = (uint32_t)obj->stopbits | (uint32_t)obj->character_size;
/* Check parity mode bits */
if (obj->parity != USART_PARITY_NONE) {
ctrla |= SERCOM_USART_CTRLA_FORM(1);
ctrlb |= obj->parity;
} else {
ctrla |= SERCOM_USART_CTRLA_FORM(0);
}
/* Write configuration to CTRLB */
_USART(obj).CTRLB.reg = ctrlb;
/* Wait until synchronization is complete */
usart_syncing(obj);
/* Write configuration to CTRLA */
_USART(obj).CTRLA.reg = ctrla;
/* Wait until synchronization is complete */
usart_syncing(obj);
enable_usart(obj);
}
/******************************************************************************
* INTERRUPTS HANDLING
******************************************************************************/
static inline void uart_irq(SercomUsart *const uart, uint32_t index) {
static inline void uart_irq(SercomUsart *const usart, uint32_t index) {
uint16_t interrupt_status;
/* Read and mask interrupt flag register */
interrupt_status = uart->INTFLAG.reg;
interrupt_status &= uart->INTENSET.reg;
interrupt_status = usart->INTFLAG.reg;
interrupt_status &= usart->INTENSET.reg;
if (serial_irq_ids[index] != 0) {
if (interrupt_status & /*SERCOM_USART_INTFLAG_TXC*/SERCOM_USART_INTFLAG_DRE) // for transmit complete
if (interrupt_status & SERCOM_USART_INTFLAG_TXC) // for transmit complete
{
usart->INTENCLR.reg = SERCOM_USART_INTFLAG_TXC;
irq_handler(serial_irq_ids[index], TxIrq);
if (interrupt_status & SERCOM_USART_INTFLAG_RXC) // for recieve complete
}
/*if (interrupt_status & SERCOM_USART_INTFLAG_DRE) // for data ready for transmit
{
if (uart_data[index].count > 0){
usart->DATA.reg = uart_data[index].string[uart_data[index].count];
uart_data[index].count--;
}
if(uart_data[index].count == 0){
usart->INTENCLR.reg = SERCOM_USART_INTFLAG_DRE;
usart->INTENSET.reg = SERCOM_USART_INTFLAG_TXC;
} else {
usart->INTENCLR.reg = SERCOM_USART_INTFLAG_DRE;
}
}*/
if (interrupt_status & SERCOM_USART_INTFLAG_RXC) // for receive complete
{
usart->INTENCLR.reg = SERCOM_USART_INTFLAG_RXC;
irq_handler(serial_irq_ids[index], RxIrq);
}
}
}
@ -434,92 +507,249 @@ void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
IRQn_Type irq_n = (IRQn_Type)0;
uint32_t vector = 0;
switch ((int)obj->uart) {
uint32_t ctrlb = 0;
disable_usart(obj);
ctrlb = _USART(obj).CTRLB.reg;
switch ((int)obj->usart) {
case UART_0:
irq_n = (uint32_t)&SERCOM0_Handler;
irq_n = SERCOM0_IRQn;
vector = (uint32_t)&uart0_irq;
break;
}
if (enable) {
// usart_enable(&usart_instance);
switch (irq){
case RxIrq: obj->uart->INTENSET.reg |= SERCOM_USART_INTENSET_RXC; break;
case TxIrq: obj->uart->INTENSET.reg |= /*SERCOM_USART_INTENSET_TXC*/SERCOM_USART_INTFLAG_DRE; break;
case RxIrq:
ctrlb |= (SERCOM_USART_CTRLB_RXEN);
break;
case TxIrq:
ctrlb |= (SERCOM_USART_CTRLB_TXEN);
break;
}
/* switch (irq) {
case RxIrq: obj->uart->C2 |= (UARTLP_C2_RIE_MASK); break;
case TxIrq: obj->uart->C2 |= (UARTLP_C2_TIE_MASK); break;
}*/
NVIC_SetVector(irq_n, vector);
NVIC_EnableIRQ(irq_n);
} else { // disable
// usart_disable(&usart_instance);
// int all_disabled = 0;
// SerialIrq other_irq = (irq == RxIrq) ? (TxIrq) : (RxIrq);
} else {
switch (irq) {
case RxIrq: obj->uart->INTENCLR.reg &= ~(SERCOM_USART_INTENCLR_RXC); break;
case TxIrq: obj->uart->INTENCLR.reg &= ~(/*SERCOM_USART_INTENCLR_TXC*/SERCOM_USART_INTFLAG_DRE); break;
case RxIrq:
ctrlb &= ~(SERCOM_USART_CTRLB_RXEN);
break;
break;
case TxIrq:
ctrlb &= ~(SERCOM_USART_CTRLB_TXEN);
break;
}
NVIC_DisableIRQ(irq_n);
/*int all_disabled = 0;
SerialIrq other_irq = (irq == RxIrq) ? (TxIrq) : (RxIrq);
switch (irq) {
case RxIrq: obj->uart->C2 &= ~(UARTLP_C2_RIE_MASK); break;
case TxIrq: obj->uart->C2 &= ~(UARTLP_C2_TIE_MASK); break;
}
switch (other_irq) {
case RxIrq: all_disabled = (obj->uart->C2 & (UARTLP_C2_RIE_MASK)) == 0; break;
case TxIrq: all_disabled = (obj->uart->C2 & (UARTLP_C2_TIE_MASK)) == 0; break;
}
if (all_disabled)
NVIC_DisableIRQ(irq_n);*/
}
_USART(obj).CTRLB.reg = ctrlb;
enable_usart(obj);
}
/******************************************************************************
* READ/WRITE
******************************************************************************/
int serial_getc(serial_t *obj) {
_USART(obj).INTENSET.reg = SERCOM_USART_INTFLAG_RXC; // test
while (!serial_readable(obj));
return obj->uart->DATA.reg ;
// return obj->uart->D;
return _USART(obj).DATA.reg ;
}
void serial_putc(serial_t *obj, int c) {
uint16_t q = (c & SERCOM_USART_DATA_MASK);
while (!serial_writable(obj));
obj->uart->DATA.reg = (c & SERCOM_USART_DATA_MASK);
// obj->uart->D = c;
// uart_data[obj->index].count++;
// uart_data[obj->index].string[uart_data[obj->index].count] = q;
// _USART(obj).INTENSET.reg = SERCOM_USART_INTFLAG_DRE;
_USART(obj).DATA.reg = q;
while (!(_USART(obj).INTFLAG.reg & SERCOM_USART_INTFLAG_TXC)); // wait till data is sent
}
int serial_readable(serial_t *obj) {
// check overrun
/*if (obj->uart->S1 & UARTLP_S1_OR_MASK) {
obj->uart->S1 |= UARTLP_S1_OR_MASK;
}*/
return 0/*(obj->uart->S1 & UARTLP_S1_RDRF_MASK)*/;
uint32_t status = 1;
if (!(_USART(obj).INTFLAG.reg & SERCOM_USART_INTFLAG_RXC)) {
status = 0;
}
else {
status = 1;
}
return status;
}
int serial_writable(serial_t *obj) {
// check overrun
/*if (obj->uart->S1 & UARTLP_S1_OR_MASK) {
obj->uart->S1 |= UARTLP_S1_OR_MASK;
}*/
return 0/*(obj->uart->S1 & UARTLP_S1_TDRE_MASK)*/;
uint32_t status = 1;
if (!(_USART(obj).INTFLAG.reg & SERCOM_USART_INTFLAG_DRE)) {
status = 0;
}
else {
status = 1;
}
return status;
}
void serial_clear(serial_t *obj) {
/************************************************************************************
* ASYNCHRONOUS HAL *
************************************************************************************/
#if DEVICE_SERIAL_ASYNCH
/************************************
* HELPER FUNCTIONS *
***********************************/
/** Configure TX events
*
* @param obj The serial object
* @param event The logical OR of the TX events to configure
* @param enable Set to non-zero to enable events, or zero to disable them
*/
void serial_tx_enable_event(serial_t *obj, int event, uint8_t enable)
{
}
void serial_pinout_tx(PinName tx) {
// pinmap_pinout(tx, PinMap_UART_TX);
/**
* @param obj The serial object.
* @param event The logical OR of the RX events to configure
* @param enable Set to non-zero to enable events, or zero to disable them
*/
void serial_rx_enable_event(serial_t *obj, int event, uint8_t enable)
{
}
void serial_break_set(serial_t *obj) {
// obj->uart->C2 |= UARTLP_C2_SBK_MASK;
/** Configure the TX buffer for an asynchronous write serial transaction
*
* @param obj The serial object.
* @param tx The buffer for sending.
* @param tx_length The number of words to transmit.
*/
void serial_tx_buffer_set(serial_t *obj, void *tx, int tx_length, uint8_t width)
{
}
void serial_break_clear(serial_t *obj) {
// obj->uart->C2 &= ~UARTLP_C2_SBK_MASK;
/** Configure the TX buffer for an asynchronous read serial transaction
*
* @param obj The serial object.
* @param rx The buffer for receiving.
* @param rx_length The number of words to read.
*/
void serial_rx_buffer_set(serial_t *obj, void *rx, int rx_length, uint8_t width)
{
}
/** Set character to be matched. If an event is enabled, and received character
* matches the defined char_match, the receiving process is stopped and MATCH event
* is invoked
*
* @param obj The serial object
* @param char_match A character in range 0-254
*/
void serial_set_char_match(serial_t *obj, uint8_t char_match)
{
}
/************************************
* TRANSFER FUNCTIONS *
***********************************/
/** Begin asynchronous TX transfer. The used buffer is specified in the serial object,
* tx_buff
*
* @param obj The serial object
* @param cb The function to call when an event occurs
* @param hint A suggestion for how to use DMA with this transfer
* @return Returns number of data transfered, or 0 otherwise
*/
int serial_tx_asynch(serial_t *obj, void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint)
{
}
/** Begin asynchronous RX transfer (enable interrupt for data collecting)
* The used buffer is specified in the serial object - rx_buff
*
* @param obj The serial object
* @param cb The function to call when an event occurs
* @param hint A suggestion for how to use DMA with this transfer
*/
void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint)
{
}
/** Attempts to determine if the serial peripheral is already in use for TX
*
* @param obj The serial object
* @return Non-zero if the TX transaction is ongoing, 0 otherwise
*/
uint8_t serial_tx_active(serial_t *obj)
{
}
/** Attempts to determine if the serial peripheral is already in use for RX
*
* @param obj The serial object
* @return Non-zero if the RX transaction is ongoing, 0 otherwise
*/
uint8_t serial_rx_active(serial_t *obj)
{
}
/** The asynchronous TX handler. Writes to the TX FIFO and checks for events.
* If any TX event has occured, the TX abort function is called.
*
* @param obj The serial object
* @return Returns event flags if a TX transfer termination condition was met or 0 otherwise
*/
int serial_tx_irq_handler_asynch(serial_t *obj)
{
}
/** The asynchronous RX handler. Reads from the RX FIFOF and checks for events.
* If any RX event has occured, the RX abort function is called.
*
* @param obj The serial object
* @return Returns event flags if a RX transfer termination condition was met or 0 otherwise
*/
int serial_rx_irq_handler_asynch(serial_t *obj)
{
}
/** Unified IRQ handler. Determines the appropriate handler to execute and returns the flags.
*
* WARNING: this code should be stateless, as re-entrancy is very possible in interrupt-based mode.
*/
int serial_irq_handler_asynch(serial_t *obj)
{
}
/** Abort the ongoing TX transaction. It disables the enabled interupt for TX and
* flush TX hardware buffer if TX FIFO is used
*
* @param obj The serial object
*/
void serial_tx_abort_asynch(serial_t *obj)
{
}
/** Abort the ongoing RX transaction It disables the enabled interrupt for RX and
* flush RX hardware buffer if RX FIFO is used
*
* @param obj The serial object
*/
void serial_rx_abort_asynch(serial_t *obj)
{
}
#endif

2
workspace_tools/settings.py
View File

@ -54,7 +54,7 @@ ARM_CPPLIB = join(ARM_LIB, "cpplib")
MY_ARM_CLIB = join(ARM_PATH, "lib", "microlib")
# GCC ARM
GCC_ARM_PATH = "C:/arm-gnu-toolchain/bin"
GCC_ARM_PATH = "C:/Program Files/ARM/armcc_4.1_791"
# GCC CodeSourcery
GCC_CS_PATH = "C:/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"