Merge pull request #6070 from ithinuel/remove-magic

remove magic calibration value for HSI in ST's targets

targets/TARGET_STM/TARGET_STM32F2/TARGET_NUCLEO_F207ZG/device/system_clock.c

@@ -195,7 +195,7 @@ uint8_t SetSysClock_PLL_HSI(void)
 
     RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
     RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM = 16;

targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_clock.c

@@ -207,7 +207,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     //RCC_OscInitStruct.PLL.PLLM          = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/device/system_clock.c

@@ -207,7 +207,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     //RCC_OscInitStruct.PLL.PLLM          = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/device/system_clock.c

@@ -211,7 +211,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F401xC/TARGET_DISCO_F401VC/system_clock.c

@@ -203,7 +203,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F401xE/TARGET_NUCLEO_F401RE/system_clock.c

@@ -210,7 +210,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407xG/TARGET_ARCH_MAX/system_clock.c

@@ -204,7 +204,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407xG/TARGET_DISCO_F407VG/system_clock.c

@@ -209,7 +209,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F410xB/TARGET_NUCLEO_F410RB/system_clock.c

@@ -209,7 +209,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F411xE/TARGET_ELMO_F411RE/system_clock.c

@@ -213,7 +213,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     //RCC_OscInitStruct.PLL.PLLM          = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F411xE/TARGET_NUCLEO_F411RE/system_clock.c

@@ -212,7 +212,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F411xE/TARGET_SAKURAIO_EVB_01/system_clock.c

@@ -212,7 +212,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F412xG/TARGET_MTB_MXCHIP_EMW3166/system_clock.c

@@ -230,7 +230,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F412xG/TARGET_NUCLEO_F412ZG/system_clock.c

@@ -229,7 +229,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F413xH/TARGET_DISCO_F413ZH/system_clock.c

@@ -230,7 +230,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F413xH/TARGET_NUCLEO_F413ZH/system_clock.c

@@ -228,7 +228,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F429xI/TARGET_DISCO_F429ZI/system_clock.c

@@ -192,7 +192,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM = 8;

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F429xI/TARGET_NUCLEO_F429ZI/system_clock.c

@@ -192,7 +192,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM = 8;

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_NUCLEO_F439ZI/system_clock.c

@@ -207,7 +207,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM = 8;

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F446xE/TARGET_B96B_F446VE/system_clock.c

@@ -224,7 +224,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F446xE/TARGET_NUCLEO_F446RE/system_clock.c

@@ -222,7 +222,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F446xE/TARGET_NUCLEO_F446ZE/system_clock.c

@@ -235,7 +235,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F469xI/TARGET_DISCO_F469NI/system_clock.c

@@ -234,7 +234,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F7/TARGET_STM32F746xG/TARGET_DISCO_F746NG/system_clock.c

@@ -211,7 +211,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;            // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F7/TARGET_STM32F746xG/TARGET_NUCLEO_F746ZG/system_clock.c

@@ -212,7 +212,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;            // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F7/TARGET_STM32F756xG/TARGET_NUCLEO_F756ZG/system_clock.c

@@ -211,7 +211,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32F7/TARGET_STM32F767xI/TARGET_NUCLEO_F767ZI/system_clock.c

@@ -213,7 +213,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 8;            // VCO input clock = 2 MHz (16 MHz / 8)

targets/TARGET_STM/TARGET_STM32F7/TARGET_STM32F769xI/TARGET_DISCO_F769NI/system_clock.c

@@ -215,7 +215,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
     RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)

targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L073RZ/device/system_clock.c

@@ -209,7 +209,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.HSI48State          = RCC_HSI48_ON; /* For USB and RNG clock */
     // PLLCLK = (16 MHz * 4)/2 = 32 MHz
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;

targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L053x8/TARGET_DISCO_L053C8/system_clock.c

@@ -210,7 +210,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.HSI48State          = RCC_HSI48_ON; /* For USB and RNG clock */
     // PLLCLK = (16 MHz * 4)/2 = 32 MHz
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;

targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L053x8/TARGET_NUCLEO_L053R8/system_clock.c

@@ -210,7 +210,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.HSI48State          = RCC_HSI48_ON; /* For USB and RNG clock */
     // PLLCLK = (16 MHz * 4)/2 = 32 MHz
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;

targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L0x2xZ/TARGET_MTB_MURATA_ABZ/system_clock.c

@@ -115,7 +115,7 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
     RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
     RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.HSI48State          = RCC_HSI48_ON; /* For USB and RNG clock */
     // PLLCLK = (16 MHz * 4)/2 = 32 MHz
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;