diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralNames.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralNames.h new file mode 100644 index 0000000000..48a340330f --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralNames.h @@ -0,0 +1,99 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ADC_1 = (int)ADC1_BASE, + ADC_2 = (int)ADC2_BASE, + ADC_3 = (int)ADC3_BASE +} ADCName; + +typedef enum { + DAC_1 = DAC_BASE +} DACName; + +typedef enum { + UART_1 = (int)USART1_BASE, + UART_2 = (int)USART2_BASE, + UART_3 = (int)USART3_BASE, + UART_4 = (int)UART4_BASE, + UART_5 = (int)UART5_BASE, + UART_6 = (int)USART6_BASE, + UART_7 = (int)UART7_BASE, + UART_8 = (int)UART8_BASE +} UARTName; + +#define STDIO_UART_TX PA_9 +#define STDIO_UART_RX PB_7 +#define STDIO_UART UART_1 + +typedef enum { + SPI_1 = (int)SPI1_BASE, + SPI_2 = (int)SPI2_BASE, + SPI_3 = (int)SPI3_BASE, + SPI_4 = (int)SPI4_BASE, + SPI_5 = (int)SPI5_BASE, + SPI_6 = (int)SPI6_BASE +} SPIName; + +typedef enum { + I2C_1 = (int)I2C1_BASE, + I2C_2 = (int)I2C2_BASE, + I2C_3 = (int)I2C3_BASE, + I2C_4 = (int)I2C4_BASE +} I2CName; + +typedef enum { + PWM_1 = (int)TIM1_BASE, + PWM_2 = (int)TIM2_BASE, + PWM_3 = (int)TIM3_BASE, + PWM_4 = (int)TIM4_BASE, + PWM_5 = (int)TIM5_BASE, + PWM_8 = (int)TIM8_BASE, + PWM_9 = (int)TIM9_BASE, + PWM_10 = (int)TIM10_BASE, + PWM_11 = (int)TIM11_BASE, + PWM_12 = (int)TIM12_BASE, + PWM_13 = (int)TIM13_BASE, + PWM_14 = (int)TIM14_BASE +} PWMName; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralPins.c b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralPins.c new file mode 100644 index 0000000000..695b9028e1 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralPins.c @@ -0,0 +1,327 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#include "PeripheralPins.h" + +// ============================================================================= +// Notes: +// * Commented lines are alternative possibilities which are not used per default. +// If you change them, you will have also to modify the corresponding xxx_api.c file +// for pwmout, analogin, analogout, ... +// * Only the pins that are placed on the Arduino connector are described. +// ============================================================================= + +//*** ADC *** + +const PinMap PinMap_ADC[] = { + {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 - ARDUINO A0 + // {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 (used by ethernet) + // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 (used by ethernet) + {PA_3, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 + {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 + {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 - ARDUINO D13 + {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - ARDUINO D12 + {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 (JP6) - ARDUINO D11 + // {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 (used by LED1) + {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 + {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,10, 0)}, // ADC1_IN10 - ARDUINO A1 + // {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,11, 0)}, // ADC1_IN11 (used by ethernet) + {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC1_IN12 + {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,13, 0)}, // ADC1_IN13 - ARDUINO A2 + // {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,14, 0)}, // ADC1_IN14 (used by ethernet) + // {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,15, 0)}, // ADC1_IN15 (used by ethernet) + + {PF_3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 - ARDUINO A3 + {PF_4, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,14, 0)}, // ADC3_IN14 + {PF_5, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,15, 0)}, // ADC3_IN15 - ARDUINO A4 + {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 + {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 + {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 + {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 + {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A5 + + {NC, NC, 0} +}; + +//*** DAC *** + +const PinMap PinMap_DAC[] = { + {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1 + {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2 + {NC, NC, 0} +}; + +//*** I2C *** + +const PinMap PinMap_I2C_SDA[] = { + // {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // (used by LED2) + {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {PD_13, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, + {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PF_15, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, + {NC, NC, 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, + {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PF_14, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, + {NC, NC, 0} +}; + +//*** PWM *** + +const PinMap PinMap_PWM[] = { + {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 (used by us_ticker) + // {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 (used by ethernet) + // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 (used by ethernet & us_ticker) + // {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 (used by ethernet) + // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 (used by ethernet & us_ticker) + // {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 (used by ethernet) + {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + // {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 (used by us_ticker) + // {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 + {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + // {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + // {PA_6, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 + {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N (remove JP6 to use it) + // {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 (remove JP6 to use it) + // {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N (remove JP6 to use it) + // {PA_7, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 (remove JP6 to use it) + {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + // {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 (used by USB) + // {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 (used by USB) + // {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 (used by USB) + {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + + // {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N (used by LED1) + // {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + // {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + // {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + // {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + // {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 (used by LED2) + {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 +// {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 + {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 +// {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 + {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N (remove JP7 to use it) + // {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N (used by LED3) + // {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N (used by LED3) + // {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 (used by LED3) + // {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + // {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 + + // {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 + // {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 + // {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 + // {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 + + {PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + {PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + {PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + {PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + + {PE_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 + {PE_6, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 + {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + + {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 + {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 + {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 + {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 + {NC, NC, 0} +}; + +//*** SERIAL *** + +const PinMap PinMap_UART_TX[] = { + {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + // {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, // (used by ethernet) + // {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb) + {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + // {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)}, + {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, + {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // STDIO_TX + + {PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART8)}, + {PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART7)}, + + {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, + {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1 + {NC, NC, 0} +}; + +const PinMap PinMap_UART_RX[] = { + // {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // (used by ethernet) + {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, // ARDUINO A0 + // {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb) + // {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by LED2) + {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + // {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)}, + {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, + {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // STDIO_RX + + {PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART8)}, + {PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART7)}, + + {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, + + {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0 + {NC, NC, 0} +}; + +const PinMap PinMap_UART_RTS[] = { + // {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, // (used by ethernet) + // {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb) + {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART4)}, + // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // (used by LED3) + {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART5)}, + {PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, + {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PD_15, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART8)}, // ARDUINO D9 + {PE_9, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART7)}, // ARDUINO D6 + {PF_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, + {PG_8, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PG_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {NC, NC, 0} +}; + +const PinMap PinMap_UART_CTS[] = { + {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, + // {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb) + // {PB_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART4)}, // (used by LED1) + {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // (remove JP7 to use it) + {PC_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART5)}, + {PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)}, + {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PD_14, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART8)}, // ARDUINO D10 + {PE_10, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART7)}, + {PF_9, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, + {PG_13, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PG_15, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + + {NC, NC, 0} +}; + +//*** SPI *** + +const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO D11 (remove JP6 to use it) + {PB_2, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI3)}, + {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + // {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + // {PC_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (used by Ethernet) + {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO A2 + {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI3)}, + {PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, + {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, + {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, + {PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, + {PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)}, // ARDUINO D1 + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO D12 + {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + // {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + // {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (used by LED3) + {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, + {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, // ARDUINO D3 + {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, + {PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO D13 + // {PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (used by USB) + {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + // {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (remove JP7 to use it) + {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, + {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, + {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, + // {PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)}, // (used by Ethernet) + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + // {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + // {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)}, + {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14 + {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, + {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, // ARDUINO D5 + {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, + {NC, NC, 0} +}; diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PinNames.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PinNames.h new file mode 100644 index 0000000000..4f5e0120ee --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PinNames.h @@ -0,0 +1,260 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7))) + +#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7) |\ + ((CHANNEL & 0x0F) << 11) |\ + ((INVERTED & 0x01) << 15))) + +#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) +#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) +#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) +#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) +#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) + +#define STM_MODE_INPUT (0) +#define STM_MODE_OUTPUT_PP (1) +#define STM_MODE_OUTPUT_OD (2) +#define STM_MODE_AF_PP (3) +#define STM_MODE_AF_OD (4) +#define STM_MODE_ANALOG (5) +#define STM_MODE_IT_RISING (6) +#define STM_MODE_IT_FALLING (7) +#define STM_MODE_IT_RISING_FALLING (8) +#define STM_MODE_EVT_RISING (9) +#define STM_MODE_EVT_FALLING (10) +#define STM_MODE_EVT_RISING_FALLING (11) +#define STM_MODE_IT_EVT_RESET (12) + +// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K) +// Low nibble = pin number +#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) +#define STM_PIN(X) ((uint32_t)(X) & 0xF) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_0 = 0x30, + PD_1 = 0x31, + PD_2 = 0x32, + PD_3 = 0x33, + PD_4 = 0x34, + PD_5 = 0x35, + PD_6 = 0x36, + PD_7 = 0x37, + PD_8 = 0x38, + PD_9 = 0x39, + PD_10 = 0x3A, + PD_11 = 0x3B, + PD_12 = 0x3C, + PD_13 = 0x3D, + PD_14 = 0x3E, + PD_15 = 0x3F, + + PE_0 = 0x40, + PE_1 = 0x41, + PE_2 = 0x42, + PE_3 = 0x43, + PE_4 = 0x44, + PE_5 = 0x45, + PE_6 = 0x46, + PE_7 = 0x47, + PE_8 = 0x48, + PE_9 = 0x49, + PE_10 = 0x4A, + PE_11 = 0x4B, + PE_12 = 0x4C, + PE_13 = 0x4D, + PE_14 = 0x4E, + PE_15 = 0x4F, + + PF_0 = 0x50, + PF_1 = 0x51, + PF_2 = 0x52, + PF_3 = 0x53, + PF_4 = 0x54, + PF_5 = 0x55, + PF_6 = 0x56, + PF_7 = 0x57, + PF_8 = 0x58, + PF_9 = 0x59, + PF_10 = 0x5A, + PF_11 = 0x5B, + PF_12 = 0x5C, + PF_13 = 0x5D, + PF_14 = 0x5E, + PF_15 = 0x5F, + + PG_0 = 0x60, + PG_1 = 0x61, + PG_2 = 0x62, + PG_3 = 0x63, + PG_4 = 0x64, + PG_5 = 0x65, + PG_6 = 0x66, + PG_7 = 0x67, + PG_8 = 0x68, + PG_9 = 0x69, + PG_10 = 0x6A, + PG_11 = 0x6B, + PG_12 = 0x6C, + PG_13 = 0x6D, + PG_14 = 0x6E, + PG_15 = 0x6F, + + PH_0 = 0x70, + PH_1 = 0x71, + + // Arduino connector namings + A0 = PA_3, + A1 = PC_0, + A2 = PC_3, + A3 = PF_3, + A4 = PF_5, + A5 = PF_10, + D0 = PG_9, + D1 = PG_14, + D2 = PF_15, + D3 = PE_13, + D4 = PF_14, + D5 = PE_11, + D6 = PE_9, + D7 = PF_13, + D8 = PF_12, + D9 = PD_15, + D10 = PD_14, + D11 = PA_7, + D12 = PA_6, + D13 = PA_5, + D14 = PB_9, + D15 = PB_8, + + // Generic signals namings + LED1 = PB_0, // LD1 = GREEN + LED2 = PB_7, // Blue + LED3 = PB_14, // Red + LED4 = PB_0, + USER_BUTTON = PC_13, + SERIAL_TX = PD_8, // Virtual Com Port + SERIAL_RX = PD_9, // Virtual Com Port + USBTX = PD_8, // Virtual Com Port + USBRX = PD_9, // Virtual Com Port + I2C_SCL = D15, + I2C_SDA = D14, + SPI_MOSI = D11, + SPI_MISO = D12, + SPI_SCK = D13, + SPI_CS = D10, + PWM_OUT = D9, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullUp = 1, + PullDown = 2, + OpenDrain = 3, + PullDefault = PullNone +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PortNames.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PortNames.h new file mode 100644 index 0000000000..f7d2f9076d --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PortNames.h @@ -0,0 +1,54 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PORTNAMES_H +#define MBED_PORTNAMES_H + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PortA = 0, + PortB = 1, + PortC = 2, + PortD = 3, + PortE = 4, + PortF = 5, + PortG = 6, + PortH = 7, +// PortI = 8, +// PortJ = 9, +// PortK = 10 +} PortName; + +#ifdef __cplusplus +} +#endif +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/device.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/device.h new file mode 100644 index 0000000000..73525825f7 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/device.h @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/objects.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/objects.h new file mode 100644 index 0000000000..b5beed24ba --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/objects.h @@ -0,0 +1,119 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_OBJECTS_H +#define MBED_OBJECTS_H + +#include "cmsis.h" +#include "PortNames.h" +#include "PeripheralNames.h" +#include "PinNames.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct gpio_irq_s { + IRQn_Type irq_n; + uint32_t irq_index; + uint32_t event; + PinName pin; +}; + +struct port_s { + PortName port; + uint32_t mask; + PinDirection direction; + __IO uint32_t *reg_in; + __IO uint32_t *reg_out; +}; + +struct analogin_s { + ADCName adc; + PinName pin; + uint8_t channel; +}; + +struct dac_s { + DACName dac; + PinName pin; + uint32_t channel; +}; + +struct serial_s { + UARTName uart; + int index; // Used by irq + uint32_t baudrate; + uint32_t databits; + uint32_t stopbits; + uint32_t parity; + PinName pin_tx; + PinName pin_rx; +#if DEVICE_SERIAL_FC + uint32_t hw_flow_ctl; + PinName pin_rts; + PinName pin_cts; +#endif +}; + +struct spi_s { + SPIName spi; + uint32_t bits; + uint32_t cpol; + uint32_t cpha; + uint32_t mode; + uint32_t nss; + uint32_t br_presc; + PinName pin_miso; + PinName pin_mosi; + PinName pin_sclk; + PinName pin_ssel; +}; + +struct i2c_s { + I2CName i2c; + uint32_t slave; +}; + +struct pwmout_s { + PWMName pwm; + PinName pin; + uint32_t period; + uint32_t pulse; + uint8_t channel; + uint8_t inverted; +}; + +#include "gpio_object.h" + +#ifdef __cplusplus +} +#endif + +#endif