[Wio 3G] Fix onboard modem initialization

Fix for issue #9450 by adding turning off the modem power at startup, so that modem is sure to be in the initial state.
Fix for wrong filename and classname.

// WIP

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_WIO_3G/ONBOARD_QUECTEL_UG96.cpp

@@ -16,36 +16,37 @@
 
 #if MBED_CONF_NSAPI_PRESENT
 
-#include "ONBOARD_QUECTEL_BG96.h"
+#include "ONBOARD_QUECTEL_UG96.h"
 
 #include "cellular/onboard_modem_api.h"
 #include "UARTSerial.h"
 
 using namespace mbed;
 
-ONBOARD_QUECTEL_BG96::ONBOARD_QUECTEL_BG96(FileHandle *fh) : QUECTEL_BG96(fh)
+ONBOARD_QUECTEL_UG96::ONBOARD_QUECTEL_UG96(FileHandle *fh) : QUECTEL_UG96(fh)
 {
+    ::onboard_modem_init();
 }
 
-nsapi_error_t ONBOARD_QUECTEL_BG96::hard_power_on()
+nsapi_error_t ONBOARD_QUECTEL_UG96::hard_power_on()
 {
     ::onboard_modem_init();
     return NSAPI_ERROR_OK;
 }
 
-nsapi_error_t ONBOARD_QUECTEL_BG96::hard_power_off()
+nsapi_error_t ONBOARD_QUECTEL_UG96::hard_power_off()
 {
     ::onboard_modem_deinit();
     return NSAPI_ERROR_OK;
 }
 
-nsapi_error_t ONBOARD_QUECTEL_BG96::soft_power_on()
+nsapi_error_t ONBOARD_QUECTEL_UG96::soft_power_on()
 {
     ::onboard_modem_power_up();
     return NSAPI_ERROR_OK;
 }
 
-nsapi_error_t ONBOARD_QUECTEL_BG96::soft_power_off()
+nsapi_error_t ONBOARD_QUECTEL_UG96::soft_power_off()
 {
     ::onboard_modem_power_down();
     return NSAPI_ERROR_OK;
@@ -54,7 +55,7 @@ nsapi_error_t ONBOARD_QUECTEL_BG96::soft_power_off()
 CellularDevice *CellularDevice::get_target_default_instance()
 {
     static UARTSerial serial(MDMTXD, MDMRXD, 115200);
-    static ONBOARD_QUECTEL_BG96 device(&serial);
+    static ONBOARD_QUECTEL_UG96 device(&serial);
     return &device;
 }
 

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_WIO_3G/ONBOARD_QUECTEL_UG96.h

@@ -14,16 +14,16 @@
  * limitations under the License.
  */
 
-#ifndef ONBOARD_QUECTEL_BG96_
+#ifndef ONBOARD_QUECTEL_UG96_
-#define ONBOARD_QUECTEL_BG96_
+#define ONBOARD_QUECTEL_UG96_
 
-#include "QUECTEL_BG96.h"
+#include "QUECTEL_UG96.h"
 
 namespace mbed {
 
-class ONBOARD_QUECTEL_BG96 : public QUECTEL_BG96 {
+class ONBOARD_QUECTEL_UG96 : public QUECTEL_UG96 {
 public:
-    ONBOARD_QUECTEL_BG96(FileHandle *fh);
+    ONBOARD_QUECTEL_UG96(FileHandle *fh);
 
     virtual nsapi_error_t hard_power_on();
     virtual nsapi_error_t hard_power_off();
@@ -33,4 +33,4 @@ public:
 
 } // namespace mbed
 
-#endif // ONBOARD_QUECTEL_BG96_
+#endif // ONBOARD_QUECTEL_UG96_

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_WIO_3G/onboard_modem_api.c

@@ -1,5 +1,7 @@
 /* mbed Microcontroller Library
- * Copyright (c) 2017 ARM Limited
+ * Copyright (c) 2017 Arm Limited
+ *
+ * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -21,6 +23,8 @@
 #include "platform/mbed_wait_api.h"
 #include "PinNames.h"
 
+#define WAIT_AFTER_POWR_CHANGED	(1000)	// [msec.]
+
 #if MODEM_ON_BOARD
 
 static void press_power_button(int time_ms)
@@ -28,7 +32,6 @@ static void press_power_button(int time_ms)
     gpio_t gpio;
 
     gpio_init_out_ex(&gpio, PWRKEY, 1);
-    gpio_write(&gpio, 1);
     wait_ms(time_ms);
     gpio_write(&gpio, 0);
 }
@@ -36,35 +39,50 @@ static void press_power_button(int time_ms)
 void onboard_modem_init()
 {
     gpio_t gpio;
-    // start with modem disabled
-    gpio_init_out_ex(&gpio, RESET_MODULE, 0);
-    gpio_init_in_ex(&gpio, MDMSTAT, PullUp);
-    gpio_init_out_ex(&gpio, MDMDTR,       0);
-    gpio_init_out_ex(&gpio, M_POWR, 1);
 
-//    gpio_write(&gpio, M_POWR, 1);
+    // Power Supply
-    wait_ms(500);
+    gpio_init_out_ex(&gpio, M_POWR, 0);
+    // Turn On/Off
+    gpio_init_out_ex(&gpio, PWRKEY, 0);
+    gpio_init_out_ex(&gpio, RESET_MODULE, 0);
+    // Status Indication
+    gpio_init_in_ex(&gpio, MDMSTAT, PullUp);
+    // Main UART Interface
+    gpio_init_out_ex(&gpio, MDMDTR, 0);
+
+    wait_ms(WAIT_AFTER_POWR_CHANGED);
 }
 
 void onboard_modem_deinit()
 {
-//    wio3g_mdm_powerOff();
+    gpio_t gpio;
+
+    // Power supply OFF
+    gpio_init_out_ex(&gpio, M_POWR, 0);
+    wait_ms(WAIT_AFTER_POWR_CHANGED);
 }
 
 void onboard_modem_power_up()
 {
-    /* keep the power line HIGH for 200 milisecond */
+    gpio_t gpio;
-    press_power_button(200);
+
-    /* give modem a little time to respond */
+    // Power supply ON
+    gpio_init_out_ex(&gpio, M_POWR, 1);
+    wait_ms(WAIT_AFTER_POWR_CHANGED);
+
+    // Turn on
     wait_ms(100);
+    press_power_button(200);
 }
 
 void onboard_modem_power_down()
 {
-    /* keep the power line low for 1 second */
+    gpio_t gpio;
-//    press_power_button(1000);
 
-//    gpio_write(&mpowr, M_POWR, 0);
+    // Power supply OFF
+    gpio_init_out_ex(&gpio, M_POWR, 0);
+    wait_ms(WAIT_AFTER_POWR_CHANGED);
 }
 #endif //MODEM_ON_BOARD
+
 #endif //MBED_CONF_NSAPI_PRESENT