From 994cece4dda5ba834cca151ec3f16cd1fedb73b0 Mon Sep 17 00:00:00 2001 From: ohagendorf Date: Sat, 20 Aug 2016 20:14:32 +0200 Subject: [PATCH 1/7] [disco_f769ni] adding target --- hal/targets.json | 11 + .../TOOLCHAIN_ARM_STD/startup_stm32f769xx.S | 479 + .../TOOLCHAIN_ARM_STD/stm32f769ni.sct | 45 + .../TOOLCHAIN_ARM_STD/sys.cpp | 56 + .../TOOLCHAIN_GCC_ARM/STM32F769NI.ld | 153 + .../TOOLCHAIN_GCC_ARM/startup_stm32f769xx.S | 644 + .../TOOLCHAIN_IAR/startup_stm32f769xx.S | 804 ++ .../TOOLCHAIN_IAR/stm32f769ni.icf | 35 + .../TARGET_DISCO_F769NI/cmsis.h | 38 + .../TARGET_DISCO_F769NI/cmsis_nvic.c | 55 + .../TARGET_DISCO_F769NI/cmsis_nvic.h | 54 + .../TARGET_DISCO_F769NI/hal_tick.c | 144 + .../TARGET_DISCO_F769NI/hal_tick.h | 62 + .../TARGET_DISCO_F769NI/stm32f769xx.h | 11332 ++++++++++++++++ .../TARGET_DISCO_F769NI/stm32f7xx.h | 216 + .../TARGET_DISCO_F769NI/stm32f7xx_hal_conf.h | 454 + .../TARGET_DISCO_F769NI/system_stm32f7xx.c | 852 ++ .../TARGET_DISCO_F769NI/system_stm32f7xx.h | 126 + .../TARGET_DISCO_F769NI/PeripheralNames.h | 99 + .../TARGET_DISCO_F769NI/PeripheralPins.c | 193 + .../TARGET_DISCO_F769NI/PinNames.h | 317 + .../TARGET_DISCO_F769NI/PortNames.h | 54 + .../TARGET_DISCO_F769NI/device.h | 54 + .../TARGET_DISCO_F769NI/objects.h | 111 + 24 files changed, 16388 insertions(+) create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/startup_stm32f769xx.S create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/stm32f769ni.sct create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/sys.cpp create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/STM32F769NI.ld create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/startup_stm32f769xx.S create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/startup_stm32f769xx.S create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/stm32f769ni.icf create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis.h create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.c create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.h create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.c create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.h create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f769xx.h create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7xx.h create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7xx_hal_conf.h create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.c create mode 100644 hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.h create mode 100644 hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h create mode 100644 hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c create mode 100644 hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h create mode 100644 hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PortNames.h create mode 100644 hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/device.h create mode 100644 hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h diff --git a/hal/targets.json b/hal/targets.json index 15a8722b9e..3333088405 100644 --- a/hal/targets.json +++ b/hal/targets.json @@ -1106,6 +1106,17 @@ "features": ["IPV4"], "release_versions": ["2", "5"] }, + "DISCO_F769NI": { + "inherits": ["Target"], + "core": "Cortex-M7FD", + "extra_labels": ["STM", "STM32F7", "STM32F769", "STM32F769NI"], + "supported_toolchains": ["ARM", "GCC_ARM", "IAR"], + "default_toolchain": "ARM", + "progen": {"target": "disco-f769ni"}, + "detect_code": ["0817"], + "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"], + "release_versions": ["2"] + }, "DISCO_L476VG": { "inherits": ["Target"], "core": "Cortex-M4F", diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/startup_stm32f769xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/startup_stm32f769xx.S new file mode 100644 index 0000000000..8521c8b324 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/startup_stm32f769xx.S @@ -0,0 +1,479 @@ +;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f769xx.s +;* Author : MCD Application Team +;* Version : V1.1.0 +;* Date : 22-April-2016 +;* Description : STM32F769xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM7 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +__initial_sp EQU 0x20080000 ; Top of RAM + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD CAN2_TX_IRQHandler ; CAN2 TX + DCD CAN2_RX0_IRQHandler ; CAN2 RX0 + DCD CAN2_RX1_IRQHandler ; CAN2 RX1 + DCD CAN2_SCE_IRQHandler ; CAN2 SCE + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD DCMI_IRQHandler ; DCMI + DCD 0 ; Reserved + DCD RNG_IRQHandler ; Rng + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD SPI6_IRQHandler ; SPI6 + DCD SAI1_IRQHandler ; SAI1 + DCD LTDC_IRQHandler ; LTDC + DCD LTDC_ER_IRQHandler ; LTDC error + DCD DMA2D_IRQHandler ; DMA2D + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD CEC_IRQHandler ; HDMI_CEC + DCD I2C4_EV_IRQHandler ; I2C4 Event + DCD I2C4_ER_IRQHandler ; I2C4 Error + DCD SPDIF_RX_IRQHandler ; SPDIF_RX + DCD DSI_IRQHandler ; DSI + DCD DFSDM1_FLT0_IRQHandler ; DFSDM1 Filter 0 global Interrupt + DCD DFSDM1_FLT1_IRQHandler ; DFSDM1 Filter 1 global Interrupt + DCD DFSDM1_FLT2_IRQHandler ; DFSDM1 Filter 2 global Interrupt + DCD DFSDM1_FLT3_IRQHandler ; DFSDM1 Filter 3 global Interrupt + DCD SDMMC2_IRQHandler ; SDMMC2 + DCD CAN3_TX_IRQHandler ; CAN3 TX + DCD CAN3_RX0_IRQHandler ; CAN3 RX0 + DCD CAN3_RX1_IRQHandler ; CAN3 RX1 + DCD CAN3_SCE_IRQHandler ; CAN3 SCE + DCD JPEG_IRQHandler ; JPEG + DCD MDIOS_IRQHandler ; MDIOS +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT ETH_IRQHandler [WEAK] + EXPORT ETH_WKUP_IRQHandler [WEAK] + EXPORT CAN2_TX_IRQHandler [WEAK] + EXPORT CAN2_RX0_IRQHandler [WEAK] + EXPORT CAN2_RX1_IRQHandler [WEAK] + EXPORT CAN2_SCE_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_HS_WKUP_IRQHandler [WEAK] + EXPORT OTG_HS_IRQHandler [WEAK] + EXPORT DCMI_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT UART7_IRQHandler [WEAK] + EXPORT UART8_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT SPI6_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT LTDC_IRQHandler [WEAK] + EXPORT LTDC_ER_IRQHandler [WEAK] + EXPORT DMA2D_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT I2C4_EV_IRQHandler [WEAK] + EXPORT I2C4_ER_IRQHandler [WEAK] + EXPORT SPDIF_RX_IRQHandler [WEAK] + EXPORT DSI_IRQHandler [WEAK] + EXPORT DFSDM1_FLT0_IRQHandler [WEAK] + EXPORT DFSDM1_FLT1_IRQHandler [WEAK] + EXPORT DFSDM1_FLT2_IRQHandler [WEAK] + EXPORT DFSDM1_FLT3_IRQHandler [WEAK] + EXPORT SDMMC2_IRQHandler [WEAK] + EXPORT CAN3_TX_IRQHandler [WEAK] + EXPORT CAN3_RX0_IRQHandler [WEAK] + EXPORT CAN3_RX1_IRQHandler [WEAK] + EXPORT CAN3_SCE_IRQHandler [WEAK] + EXPORT JPEG_IRQHandler [WEAK] + EXPORT MDIOS_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +OTG_FS_WKUP_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +DMA1_Stream7_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +ETH_IRQHandler +ETH_WKUP_IRQHandler +CAN2_TX_IRQHandler +CAN2_RX0_IRQHandler +CAN2_RX1_IRQHandler +CAN2_SCE_IRQHandler +OTG_FS_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +OTG_HS_EP1_OUT_IRQHandler +OTG_HS_EP1_IN_IRQHandler +OTG_HS_WKUP_IRQHandler +OTG_HS_IRQHandler +DCMI_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +UART7_IRQHandler +UART8_IRQHandler +SPI4_IRQHandler +SPI5_IRQHandler +SPI6_IRQHandler +SAI1_IRQHandler +LTDC_IRQHandler +LTDC_ER_IRQHandler +DMA2D_IRQHandler +SAI2_IRQHandler +QUADSPI_IRQHandler +LPTIM1_IRQHandler +CEC_IRQHandler +I2C4_EV_IRQHandler +I2C4_ER_IRQHandler +SPDIF_RX_IRQHandler +DSI_IRQHandler +DFSDM1_FLT0_IRQHandler +DFSDM1_FLT1_IRQHandler +DFSDM1_FLT2_IRQHandler +DFSDM1_FLT3_IRQHandler +SDMMC2_IRQHandler +CAN3_TX_IRQHandler +CAN3_RX0_IRQHandler +CAN3_RX1_IRQHandler +CAN3_SCE_IRQHandler +JPEG_IRQHandler +MDIOS_IRQHandler + B . + + ENDP + + ALIGN + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/stm32f769ni.sct b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/stm32f769ni.sct new file mode 100644 index 0000000000..1c2ba8fd8d --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/stm32f769ni.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2016, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32F769NI: 2048 KB FLASH (0x200000) + 512 KB SRAM (0x80000) +LR_IROM1 0x08000000 0x200000 { ; load region size_region + + ER_IROM1 0x08000000 0x200000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; Total: 126 vectors = 504 bytes (0x1F8) to be reserved in RAM + RW_IRAM1 (0x20000000+0x1F8) (0x80000-0x1F8) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/sys.cpp b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/sys.cpp new file mode 100644 index 0000000000..bb665909b9 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_ARM_STD/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/STM32F769NI.ld b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/STM32F769NI.ld new file mode 100644 index 0000000000..359b884aee --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/STM32F769NI.ld @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K + RAM (rwx) : ORIGIN = 0x200001F8, LENGTH = 512K - 0x1F8 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/startup_stm32f769xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/startup_stm32f769xx.S new file mode 100644 index 0000000000..3cb97ec633 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_GCC_ARM/startup_stm32f769xx.S @@ -0,0 +1,644 @@ +/** + ****************************************************************************** + * @file startup_stm32f769xx.s + * @author MCD Application Team + * @version V1.1.0 + * @date 22-April-2016 + * @brief STM32F769xx Devices vector table for GCC based toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M7 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m7 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system initialization function.*/ + bl SystemInit +/* Call static constructors */ + //bl __libc_init_array +/* Call the application's entry point.*/ + //bl main + // Calling the crt0 'cold-start' entry point. There __libc_init_array is called + // and when existing hardware_init_hook() and software_init_hook() before + // starting main(). software_init_hook() is available and has to be called due + // to initializsation when using rtos. + bl _start + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M7. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* Reserved */ + .word RNG_IRQHandler /* RNG */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC */ + .word LTDC_ER_IRQHandler /* LTDC error */ + .word DMA2D_IRQHandler /* DMA2D */ + .word SAI2_IRQHandler /* SAI2 */ + .word QUADSPI_IRQHandler /* QUADSPI */ + .word LPTIM1_IRQHandler /* LPTIM1 */ + .word CEC_IRQHandler /* HDMI_CEC */ + .word I2C4_EV_IRQHandler /* I2C4 Event */ + .word I2C4_ER_IRQHandler /* I2C4 Error */ + .word SPDIF_RX_IRQHandler /* SPDIF_RX */ + .word DSI_IRQHandler /* DSI */ + .word DFSDM1_FLT0_IRQHandler /* DFSDM1 Filter 0 global Interrupt */ + .word DFSDM1_FLT1_IRQHandler /* DFSDM1 Filter 1 global Interrupt */ + .word DFSDM1_FLT2_IRQHandler /* DFSDM1 Filter 2 global Interrupt */ + .word DFSDM1_FLT3_IRQHandler /* DFSDM1 Filter 3 global Interrupt */ + .word SDMMC2_IRQHandler /* SDMMC2 */ + .word CAN3_TX_IRQHandler /* CAN3 TX */ + .word CAN3_RX0_IRQHandler /* CAN3 RX0 */ + .word CAN3_RX1_IRQHandler /* CAN3 RX1 */ + .word CAN3_SCE_IRQHandler /* CAN3 SCE */ + .word JPEG_IRQHandler /* JPEG */ + .word MDIOS_IRQHandler /* MDIOS */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + + .weak SPDIF_RX_IRQHandler + .thumb_set SPDIF_RX_IRQHandler,Default_Handler + + .weak DSI_IRQHandler + .thumb_set DSI_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak DFSDM1_FLT2_IRQHandler + .thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler + + .weak DFSDM1_FLT3_IRQHandler + .thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler + + .weak SDMMC2_IRQHandler + .thumb_set SDMMC2_IRQHandler,Default_Handler + + .weak CAN3_TX_IRQHandler + .thumb_set CAN3_TX_IRQHandler,Default_Handler + + .weak CAN3_RX0_IRQHandler + .thumb_set CAN3_RX0_IRQHandler,Default_Handler + + .weak CAN3_RX1_IRQHandler + .thumb_set CAN3_RX1_IRQHandler,Default_Handler + + .weak CAN3_SCE_IRQHandler + .thumb_set CAN3_SCE_IRQHandler,Default_Handler + + .weak JPEG_IRQHandler + .thumb_set JPEG_IRQHandler,Default_Handler + + .weak MDIOS_IRQHandler + .thumb_set MDIOS_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/startup_stm32f769xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/startup_stm32f769xx.S new file mode 100644 index 0000000000..126ba462fe --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/startup_stm32f769xx.S @@ -0,0 +1,804 @@ +;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f769xx.s +;* Author : MCD Application Team +;* Version : V1.0.1 +;* Date : 22-April-2016 +;* Description : STM32F769xx devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M7 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD CAN2_TX_IRQHandler ; CAN2 TX + DCD CAN2_RX0_IRQHandler ; CAN2 RX0 + DCD CAN2_RX1_IRQHandler ; CAN2 RX1 + DCD CAN2_SCE_IRQHandler ; CAN2 SCE + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD DCMI_IRQHandler ; DCMI + DCD 0 ; Reserved + DCD RNG_IRQHandler ; Rng + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD SPI6_IRQHandler ; SPI6 + DCD SAI1_IRQHandler ; SAI1 + DCD LTDC_IRQHandler ; LTDC + DCD LTDC_ER_IRQHandler ; LTDC error + DCD DMA2D_IRQHandler ; DMA2D + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD CEC_IRQHandler ; HDMI_CEC + DCD I2C4_EV_IRQHandler ; I2C4 Event + DCD I2C4_ER_IRQHandler ; I2C4 Error + DCD SPDIF_RX_IRQHandler ; SPDIF_RX + DCD DSI_IRQHandler ; DSI + DCD DFSDM0_IRQHandler ; DFSDM Filter1 + DCD DFSDM1_IRQHandler ; DFSDM Filter2 + DCD DFSDM2_IRQHandler ; DFSDM Filter3 + DCD DFSDM3_IRQHandler ; DFSDM Filter4 + DCD SDMMC2_IRQHandler ; SDMMC2 + DCD CAN3_TX_IRQHandler ; CAN3 TX + DCD CAN3_RX0_IRQHandler ; CAN3 RX0 + DCD CAN3_RX1_IRQHandler ; CAN3 RX1 + DCD CAN3_SCE_IRQHandler ; CAN3 SCE + DCD JPEG_IRQHandler ; JPEG + DCD MDIOS_IRQHandler ; MDIOS +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + PUBWEAK TAMP_STAMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_IRQHandler + B TAMP_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Stream0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream0_IRQHandler + B DMA1_Stream0_IRQHandler + + PUBWEAK DMA1_Stream1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream1_IRQHandler + B DMA1_Stream1_IRQHandler + + PUBWEAK DMA1_Stream2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream2_IRQHandler + B DMA1_Stream2_IRQHandler + + PUBWEAK DMA1_Stream3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream3_IRQHandler + B DMA1_Stream3_IRQHandler + + PUBWEAK DMA1_Stream4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream4_IRQHandler + B DMA1_Stream4_IRQHandler + + PUBWEAK DMA1_Stream5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream5_IRQHandler + B DMA1_Stream5_IRQHandler + + PUBWEAK DMA1_Stream6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream6_IRQHandler + B DMA1_Stream6_IRQHandler + + PUBWEAK ADC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC_IRQHandler + B ADC_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_SCE_IRQHandler + B CAN1_SCE_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_TIM9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_TIM9_IRQHandler + B TIM1_BRK_TIM9_IRQHandler + + PUBWEAK TIM1_UP_TIM10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM10_IRQHandler + B TIM1_UP_TIM10_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM11_IRQHandler + B TIM1_TRG_COM_TIM11_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + PUBWEAK TIM4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM4_IRQHandler + B TIM4_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK USART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART3_IRQHandler + B USART3_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK OTG_FS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_WKUP_IRQHandler + B OTG_FS_WKUP_IRQHandler + + PUBWEAK TIM8_BRK_TIM12_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_BRK_TIM12_IRQHandler + B TIM8_BRK_TIM12_IRQHandler + + PUBWEAK TIM8_UP_TIM13_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_UP_TIM13_IRQHandler + B TIM8_UP_TIM13_IRQHandler + + PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_TRG_COM_TIM14_IRQHandler + B TIM8_TRG_COM_TIM14_IRQHandler + + PUBWEAK TIM8_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_CC_IRQHandler + B TIM8_CC_IRQHandler + + PUBWEAK DMA1_Stream7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream7_IRQHandler + B DMA1_Stream7_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK SDMMC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDMMC1_IRQHandler + B SDMMC1_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK UART5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART5_IRQHandler + B UART5_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK DMA2_Stream0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream0_IRQHandler + B DMA2_Stream0_IRQHandler + + PUBWEAK DMA2_Stream1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream1_IRQHandler + B DMA2_Stream1_IRQHandler + + PUBWEAK DMA2_Stream2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream2_IRQHandler + B DMA2_Stream2_IRQHandler + + PUBWEAK DMA2_Stream3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream3_IRQHandler + B DMA2_Stream3_IRQHandler + + PUBWEAK DMA2_Stream4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream4_IRQHandler + B DMA2_Stream4_IRQHandler + + PUBWEAK ETH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ETH_IRQHandler + B ETH_IRQHandler + + PUBWEAK ETH_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ETH_WKUP_IRQHandler + B ETH_WKUP_IRQHandler + + PUBWEAK CAN2_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_TX_IRQHandler + B CAN2_TX_IRQHandler + + PUBWEAK CAN2_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_RX0_IRQHandler + B CAN2_RX0_IRQHandler + + PUBWEAK CAN2_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_RX1_IRQHandler + B CAN2_RX1_IRQHandler + + PUBWEAK CAN2_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_SCE_IRQHandler + B CAN2_SCE_IRQHandler + + PUBWEAK OTG_FS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_IRQHandler + B OTG_FS_IRQHandler + + PUBWEAK DMA2_Stream5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream5_IRQHandler + B DMA2_Stream5_IRQHandler + + PUBWEAK DMA2_Stream6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream6_IRQHandler + B DMA2_Stream6_IRQHandler + + PUBWEAK DMA2_Stream7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream7_IRQHandler + B DMA2_Stream7_IRQHandler + + PUBWEAK USART6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART6_IRQHandler + B USART6_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK OTG_HS_EP1_OUT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_EP1_OUT_IRQHandler + B OTG_HS_EP1_OUT_IRQHandler + + PUBWEAK OTG_HS_EP1_IN_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_EP1_IN_IRQHandler + B OTG_HS_EP1_IN_IRQHandler + + PUBWEAK OTG_HS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_WKUP_IRQHandler + B OTG_HS_WKUP_IRQHandler + + PUBWEAK OTG_HS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_IRQHandler + B OTG_HS_IRQHandler + + PUBWEAK DCMI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DCMI_IRQHandler + B DCMI_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK UART7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART7_IRQHandler + B UART7_IRQHandler + + PUBWEAK UART8_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART8_IRQHandler + B UART8_IRQHandler + + PUBWEAK SPI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI4_IRQHandler + B SPI4_IRQHandler + + PUBWEAK SPI5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI5_IRQHandler + B SPI5_IRQHandler + + PUBWEAK SPI6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI6_IRQHandler + B SPI6_IRQHandler + + PUBWEAK SAI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI1_IRQHandler + B SAI1_IRQHandler + + PUBWEAK LTDC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LTDC_IRQHandler + B LTDC_IRQHandler + + PUBWEAK LTDC_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LTDC_ER_IRQHandler + B LTDC_ER_IRQHandler + + PUBWEAK DMA2D_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2D_IRQHandler + B DMA2D_IRQHandler + + PUBWEAK SAI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI2_IRQHandler + B SAI2_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK CEC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_IRQHandler + B CEC_IRQHandler + + PUBWEAK I2C4_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C4_EV_IRQHandler + B I2C4_EV_IRQHandler + + PUBWEAK I2C4_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C4_ER_IRQHandler + B I2C4_ER_IRQHandler + + PUBWEAK SPDIF_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPDIF_RX_IRQHandler + B SPDIF_RX_IRQHandler + + PUBWEAK DSI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DSI_IRQHandler + B DSI_IRQHandler + + PUBWEAK DFSDM0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM0_IRQHandler + B DFSDM0_IRQHandler + + PUBWEAK DFSDM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM1_IRQHandler + B DFSDM1_IRQHandler + + PUBWEAK DFSDM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM2_IRQHandler + B DFSDM2_IRQHandler + + PUBWEAK DFSDM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM3_IRQHandler + B DFSDM3_IRQHandler + + PUBWEAK SDMMC2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDMMC2_IRQHandler + B SDMMC2_IRQHandler + + PUBWEAK CAN3_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN3_TX_IRQHandler + B CAN3_TX_IRQHandler + + PUBWEAK CAN3_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN3_RX0_IRQHandler + B CAN3_RX0_IRQHandler + + PUBWEAK CAN3_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN3_RX1_IRQHandler + B CAN3_RX1_IRQHandler + + PUBWEAK CAN3_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN3_SCE_IRQHandler + B CAN3_SCE_IRQHandler + + PUBWEAK JPEG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +JPEG_IRQHandler + B JPEG_IRQHandler + + PUBWEAK MDIOS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +MDIOS_IRQHandler + B MDIOS_IRQHandler + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/stm32f769ni.icf b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/stm32f769ni.icf new file mode 100644 index 0000000000..7af894aeb4 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/TOOLCHAIN_IAR/stm32f769ni.icf @@ -0,0 +1,35 @@ +/* [ROM = 2048kb = 0x200000] */ +define symbol __intvec_start__ = 0x08000000; +define symbol __region_ROM_start__ = 0x08000000; +define symbol __region_ROM_end__ = 0x081FFFFF; + +/* [RAM = 512kb = 0x80000] Vector table dynamic copy: 126 vectors = 504 bytes (0x1F8) to be reserved in RAM */ +define symbol __NVIC_start__ = 0x20000000; +define symbol __NVIC_end__ = 0x200001F7; /* Aligned on 8 bytes */ +define symbol __region_RAM_start__ = 0x200001F8; +define symbol __region_RAM_end__ = 0x2007FFFF; + +define symbol __region_ITCMRAM_start__ = 0x00000000; +define symbol __region_ITCMRAM_end__ = 0x00003FFF; + +/* Memory regions */ +define memory mem with size = 4G; +define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__]; +define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__]; +define region ITCMRAM_region = mem:[from __region_ITCMRAM_start__ to __region_ITCMRAM_end__]; + +/* Stack and Heap */ +/*Heap 1/4 of ram and stack 1/8*/ +define symbol __size_cstack__ = 0x8000; +define symbol __size_heap__ = 0x8000; +define block CSTACK with alignment = 8, size = __size_cstack__ { }; +define block HEAP with alignment = 8, size = __size_heap__ { }; +define block STACKHEAP with fixed order { block HEAP, block CSTACK }; + +initialize by copy with packing = zeros { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, block STACKHEAP }; diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis.h new file mode 100644 index 0000000000..ee3ba9007b --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis.h @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f7xx.h" +#include "cmsis_nvic.h" + +#endif diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.c b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.c new file mode 100644 index 0000000000..69a0fa5832 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.c @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "cmsis_nvic.h" + +#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM +#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { + uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t i; + + // Copy and switch to dynamic vectors if the first time called + if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) { + uint32_t *old_vectors = vectors; + vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS; + for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS; + } + vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + +uint32_t NVIC_GetVector(IRQn_Type IRQn) { + uint32_t *vectors = (uint32_t*)SCB->VTOR; + return vectors[IRQn + NVIC_USER_IRQ_OFFSET]; +} diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.h new file mode 100644 index 0000000000..0a26d73682 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/cmsis_nvic.h @@ -0,0 +1,54 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_NVIC_H +#define MBED_CMSIS_NVIC_H + +// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F +// MCU Peripherals: 98 vectors = 392 bytes from 0x40 to 0x1C7 +// Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM +#define NVIC_NUM_VECTORS 114 +#define NVIC_USER_IRQ_OFFSET 16 + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector); +uint32_t NVIC_GetVector(IRQn_Type IRQn); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.c b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.c new file mode 100644 index 0000000000..8c22bf6925 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.c @@ -0,0 +1,144 @@ +/** + ****************************************************************************** + * @file hal_tick.c + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#include "hal_tick.h" + +// 0=NO, 1=PG6 toggles at each tick +#define DEBUG_TICK 0 + +TIM_HandleTypeDef TimMasterHandle; +uint32_t PreviousVal = 0; + +void HAL_IncTick(void); +void us_ticker_irq_handler(void); + +void timer_irq_handler(void) { + // Channel 1 for mbed timeout + if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) { + if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC1) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1); + us_ticker_irq_handler(); + } + } + + // Channel 2 for HAL tick + if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) { + if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC2) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2); + uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle); + if ((val - PreviousVal) >= HAL_TICK_DELAY) { + // Increment HAL variable + HAL_IncTick(); + // Prepare next interrupt + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY); + PreviousVal = val; +#if DEBUG_TICK > 0 + HAL_GPIO_TogglePin(GPIOG, GPIO_PIN_6); +#endif + } + } + } +} + +// Reconfigure the HAL tick using a standard timer instead of systick. +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + uint32_t PclkFreq; + + // Get clock configuration + // Note: PclkFreq contains here the Latency (not used after) + HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq); + + // Get TIM5 clock value + PclkFreq = HAL_RCC_GetPCLK1Freq(); + + // Enable timer clock + TIM_MST_RCC; + + // Reset timer + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; + + // Configure time base + TimMasterHandle.Instance = TIM_MST; + TimMasterHandle.Init.Period = 0xFFFFFFFF; + + // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx + if (RCC_ClkInitStruct.APB1CLKDivider == RCC_HCLK_DIV1) + TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick + else + TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick + + TimMasterHandle.Init.ClockDivision = 0; + TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimMasterHandle.Init.RepetitionCounter = 0; + HAL_TIM_OC_Init(&TimMasterHandle); + + NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler); + NVIC_EnableIRQ(TIM_MST_IRQ); + + // Channel 1 for mbed timeout + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1); + + // Channel 2 for HAL tick + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2); + PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle); + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY); + __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); + +#if DEBUG_TICK > 0 + __GPIOG_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); +#endif + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.h new file mode 100644 index 0000000000..6501819b5d --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/hal_tick.h @@ -0,0 +1,62 @@ +/** + ****************************************************************************** + * @file hal_tick.h + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#ifndef __HAL_TICK_H +#define __HAL_TICK_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stm32f7xx.h" +#include "cmsis_nvic.h" + +#define TIM_MST TIM5 +#define TIM_MST_IRQ TIM5_IRQn +#define TIM_MST_RCC __TIM5_CLK_ENABLE() + +#define TIM_MST_RESET_ON __TIM5_FORCE_RESET() +#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET() + +#define HAL_TICK_DELAY (1000) // 1 ms + +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +#ifdef __cplusplus +} +#endif + +#endif // __HAL_TICK_H + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f769xx.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f769xx.h new file mode 100644 index 0000000000..69e99eda65 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f769xx.h @@ -0,0 +1,11332 @@ +/** + ****************************************************************************** + * @file stm32f769xx.h + * @author MCD Application Team + * @version V1.1.0 + * @date 22-April-2016 + * @brief CMSIS Cortex-M7 Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32f769xx + * @{ + */ + +#ifndef __STM32F769xx_H +#define __STM32F769xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief STM32F7xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M7 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M7 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M7 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M7 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M7 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M7 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */ + LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ + CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */ + I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */ + I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */ + SPDIF_RX_IRQn = 97, /*!< SPDIF-RX global Interrupt */ + DSI_IRQn = 98, /*!< DSI global Interrupt */ + DFSDM1_FLT0_IRQn = 99, /*!< DFSDM1 Filter 0 global Interrupt */ + DFSDM1_FLT1_IRQn = 100, /*!< DFSDM1 Filter 1 global Interrupt */ + DFSDM1_FLT2_IRQn = 101, /*!< DFSDM1 Filter 2 global Interrupt */ + DFSDM1_FLT3_IRQn = 102, /*!< DFSDM1 Filter 3 global Interrupt */ + SDMMC2_IRQn = 103, /*!< SDMMC2 global Interrupt */ + CAN3_TX_IRQn = 104, /*!< CAN3 TX Interrupt */ + CAN3_RX0_IRQn = 105, /*!< CAN3 RX0 Interrupt */ + CAN3_RX1_IRQn = 106, /*!< CAN3 RX1 Interrupt */ + CAN3_SCE_IRQn = 107, /*!< CAN3 SCE Interrupt */ + JPEG_IRQn = 108, /*!< JPEG global Interrupt */ + MDIOS_IRQn = 109 /*!< MDIO Slave global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +/** + * @brief Configuration of the Cortex-M7 Processor and Core Peripherals + */ +#define __CM7_REV 0x0100U /*!< Cortex-M7 revision r1p0 */ +#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ +#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */ +#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */ +#include "core_cm7.h" /*!< Cortex-M7 processor and core peripherals */ + + +#include "system_stm32f7xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual + AND triple modes, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief HDMI-CEC + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ +} DFSDM_Channel_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + __IO uint32_t RESERVED8; + __IO uint32_t PTPTSSR; + uint32_t RESERVED9[565]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + __IO uint32_t DMARSWTR; + uint32_t RESERVED10[8]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ + __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ + __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */ +} FLASH_TypeDef; + + + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + uint32_t RESERVED; /*!< Reserved, 0x18 */ + __IO uint32_t CBR; /*!< SYSCFG Class B register, Address offset: 0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */ +} PWR_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, 0x3C */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, 0x5C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ + uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ + __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ + __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ + __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */ + __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */ + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ + +} TIM_TypeDef; + +/** + * @brief LPTIMIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ +} LPTIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @} + */ + +/** + * @brief USB_OTG_Core_Registers + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ + __IO uint32_t CID; /*!< User ID Register 03Ch */ + uint32_t Reserved5[3]; /*!< Reserved 040h-048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ + uint32_t Reserved6; /*!< Reserved 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */ + uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ + __IO uint32_t DCTL; /*!< dev Control Register 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ + uint32_t Reserved0C; /*!< Reserved 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ + uint32_t Reserved20; /*!< Reserved 820h */ + uint32_t Reserved9; /*!< Reserved 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ +} USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ + uint32_t Reserved40C; /*!< Reserved 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ + uint32_t Reserved[2]; /*!< Reserved */ +} USB_OTG_HostChannelTypeDef; +/** + * @} + */ + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 00h */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 04h */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 08h */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0Ch */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 10h */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 14h */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 18h */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 1Ch */ + uint32_t Reserved20[4]; /* Reserved Address offset: 20h-2Ch */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 30h */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 34h */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 38h */ + uint32_t Reserved3c; /* Reserved Address offset: 3Ch */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 40h */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 44h */ + uint32_t Reserved48[2]; /* Reserved Address offset: 48h-4Ch */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 50h-8Ch */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 90h-CCh */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: D0h-10Ch */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 110h-14Ch */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 150h-18Ch */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 190h-20Ch */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 210h-35Ch */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 360h-4F8h */ + uint32_t Reserved4FC; /* Reserved Address offset: 4FCh */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encoder, AC Huffman table 0, Address offset: 500h-65Ch */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encoder, AC Huffman table 1, Address offset: 660h-7BCh */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encoder, DC Huffman table 0, Address offset: 7C0h-7DCh */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encoder, DC Huffman table 1, Address offset: 7E0h-7FCh */ + +} JPEG_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 00h */ + __IO uint32_t WRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 04h */ + __IO uint32_t CWRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 08h */ + __IO uint32_t RDFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 0Ch */ + __IO uint32_t CRDFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 10h */ + __IO uint32_t SR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 14h */ + __IO uint32_t CLRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 18h */ + uint32_t RESERVED0[57]; /* Reserved Address offset: 1Ch */ + __IO uint32_t DINR0; /*!< MDIOS Input Data Register (MDIOS_DINR0), Address offset: 100h */ + __IO uint32_t DINR1; /*!< MDIOS Input Data Register (MDIOS_DINR1), Address offset: 104h */ + __IO uint32_t DINR2; /*!< MDIOS Input Data Register (MDIOS_DINR2), Address offset: 108h */ + __IO uint32_t DINR3; /*!< MDIOS Input Data Register (MDIOS_DINR3), Address offset: 10Ch */ + __IO uint32_t DINR4; /*!< MDIOS Input Data Register (MDIOS_DINR4), Address offset: 110h */ + __IO uint32_t DINR5; /*!< MDIOS Input Data Register (MDIOS_DINR5), Address offset: 114h */ + __IO uint32_t DINR6; /*!< MDIOS Input Data Register (MDIOS_DINR6), Address offset: 118h */ + __IO uint32_t DINR7; /*!< MDIOS Input Data Register (MDIOS_DINR7), Address offset: 11Ch */ + __IO uint32_t DINR8; /*!< MDIOS Input Data Register (MDIOS_DINR8), Address offset: 120h */ + __IO uint32_t DINR9; /*!< MDIOS Input Data Register (MDIOS_DINR9), Address offset: 124h */ + __IO uint32_t DINR10; /*!< MDIOS Input Data Register (MDIOS_DINR10), Address offset: 128h */ + __IO uint32_t DINR11; /*!< MDIOS Input Data Register (MDIOS_DINR11), Address offset: 12Ch */ + __IO uint32_t DINR12; /*!< MDIOS Input Data Register (MDIOS_DINR12), Address offset: 130h */ + __IO uint32_t DINR13; /*!< MDIOS Input Data Register (MDIOS_DINR13), Address offset: 134h */ + __IO uint32_t DINR14; /*!< MDIOS Input Data Register (MDIOS_DINR14), Address offset: 138h */ + __IO uint32_t DINR15; /*!< MDIOS Input Data Register (MDIOS_DINR15), Address offset: 13Ch */ + __IO uint32_t DINR16; /*!< MDIOS Input Data Register (MDIOS_DINR16), Address offset: 140h */ + __IO uint32_t DINR17; /*!< MDIOS Input Data Register (MDIOS_DINR17), Address offset: 144h */ + __IO uint32_t DINR18; /*!< MDIOS Input Data Register (MDIOS_DINR18), Address offset: 148h */ + __IO uint32_t DINR19; /*!< MDIOS Input Data Register (MDIOS_DINR19), Address offset: 14Ch */ + __IO uint32_t DINR20; /*!< MDIOS Input Data Register (MDIOS_DINR20), Address offset: 150h */ + __IO uint32_t DINR21; /*!< MDIOS Input Data Register (MDIOS_DINR21), Address offset: 154h */ + __IO uint32_t DINR22; /*!< MDIOS Input Data Register (MDIOS_DINR22), Address offset: 158h */ + __IO uint32_t DINR23; /*!< MDIOS Input Data Register (MDIOS_DINR23), Address offset: 15Ch */ + __IO uint32_t DINR24; /*!< MDIOS Input Data Register (MDIOS_DINR24), Address offset: 160h */ + __IO uint32_t DINR25; /*!< MDIOS Input Data Register (MDIOS_DINR25), Address offset: 164h */ + __IO uint32_t DINR26; /*!< MDIOS Input Data Register (MDIOS_DINR26), Address offset: 168h */ + __IO uint32_t DINR27; /*!< MDIOS Input Data Register (MDIOS_DINR27), Address offset: 16Ch */ + __IO uint32_t DINR28; /*!< MDIOS Input Data Register (MDIOS_DINR28), Address offset: 170h */ + __IO uint32_t DINR29; /*!< MDIOS Input Data Register (MDIOS_DINR29), Address offset: 174h */ + __IO uint32_t DINR30; /*!< MDIOS Input Data Register (MDIOS_DINR30), Address offset: 178h */ + __IO uint32_t DINR31; /*!< MDIOS Input Data Register (MDIOS_DINR31), Address offset: 17Ch */ + __IO uint32_t DOUTR0; /*!< MDIOS Output Data Register (MDIOS_DOUTR0), Address offset: 180h */ + __IO uint32_t DOUTR1; /*!< MDIOS Output Data Register (MDIOS_DOUTR1), Address offset: 184h */ + __IO uint32_t DOUTR2; /*!< MDIOS Output Data Register (MDIOS_DOUTR2), Address offset: 188h */ + __IO uint32_t DOUTR3; /*!< MDIOS Output Data Register (MDIOS_DOUTR3), Address offset: 18Ch */ + __IO uint32_t DOUTR4; /*!< MDIOS Output Data Register (MDIOS_DOUTR4), Address offset: 190h */ + __IO uint32_t DOUTR5; /*!< MDIOS Output Data Register (MDIOS_DOUTR5), Address offset: 194h */ + __IO uint32_t DOUTR6; /*!< MDIOS Output Data Register (MDIOS_DOUTR6), Address offset: 198h */ + __IO uint32_t DOUTR7; /*!< MDIOS Output Data Register (MDIOS_DOUTR7), Address offset: 19Ch */ + __IO uint32_t DOUTR8; /*!< MDIOS Output Data Register (MDIOS_DOUTR8), Address offset: 1A0h */ + __IO uint32_t DOUTR9; /*!< MDIOS Output Data Register (MDIOS_DOUTR9), Address offset: 1A4h */ + __IO uint32_t DOUTR10; /*!< MDIOS Output Data Register (MDIOS_DOUTR10), Address offset: 1A8h */ + __IO uint32_t DOUTR11; /*!< MDIOS Output Data Register (MDIOS_DOUTR11), Address offset: 1ACh */ + __IO uint32_t DOUTR12; /*!< MDIOS Output Data Register (MDIOS_DOUTR12), Address offset: 1B0h */ + __IO uint32_t DOUTR13; /*!< MDIOS Output Data Register (MDIOS_DOUTR13), Address offset: 1B4h */ + __IO uint32_t DOUTR14; /*!< MDIOS Output Data Register (MDIOS_DOUTR14), Address offset: 1B8h */ + __IO uint32_t DOUTR15; /*!< MDIOS Output Data Register (MDIOS_DOUTR15), Address offset: 1BCh */ + __IO uint32_t DOUTR16; /*!< MDIOS Output Data Register (MDIOS_DOUTR16), Address offset: 1C0h */ + __IO uint32_t DOUTR17; /*!< MDIOS Output Data Register (MDIOS_DOUTR17), Address offset: 1C4h */ + __IO uint32_t DOUTR18; /*!< MDIOS Output Data Register (MDIOS_DOUTR18), Address offset: 1C8h */ + __IO uint32_t DOUTR19; /*!< MDIOS Output Data Register (MDIOS_DOUTR19), Address offset: 1CCh */ + __IO uint32_t DOUTR20; /*!< MDIOS Output Data Register (MDIOS_DOUTR20), Address offset: 1D0h */ + __IO uint32_t DOUTR21; /*!< MDIOS Output Data Register (MDIOS_DOUTR21), Address offset: 1D4h */ + __IO uint32_t DOUTR22; /*!< MDIOS Output Data Register (MDIOS_DOUTR22), Address offset: 1D8h */ + __IO uint32_t DOUTR23; /*!< MDIOS Output Data Register (MDIOS_DOUTR23), Address offset: 1DCh */ + __IO uint32_t DOUTR24; /*!< MDIOS Output Data Register (MDIOS_DOUTR24), Address offset: 1E0h */ + __IO uint32_t DOUTR25; /*!< MDIOS Output Data Register (MDIOS_DOUTR25), Address offset: 1E4h */ + __IO uint32_t DOUTR26; /*!< MDIOS Output Data Register (MDIOS_DOUTR26), Address offset: 1E8h */ + __IO uint32_t DOUTR27; /*!< MDIOS Output Data Register (MDIOS_DOUTR27), Address offset: 1ECh */ + __IO uint32_t DOUTR28; /*!< MDIOS Output Data Register (MDIOS_DOUTR28), Address offset: 1F0h */ + __IO uint32_t DOUTR29; /*!< MDIOS Output Data Register (MDIOS_DOUTR29), Address offset: 1F4h */ + __IO uint32_t DOUTR30; /*!< MDIOS Output Data Register (MDIOS_DOUTR30), Address offset: 1F8h */ + __IO uint32_t DOUTR31; /*!< MDIOS Output Data Register (MDIOS_DOUTR31), Address offset: 1FCh */ +} MDIOS_TypeDef; + +/** + * @brief DSI Controller + */ + +typedef struct +{ + __IO uint32_t VR; /*!< DSI Host Version Register, Address offset: 0x00 */ + __IO uint32_t CR; /*!< DSI Host Control Register, Address offset: 0x04 */ + __IO uint32_t CCR; /*!< DSI HOST Clock Control Register, Address offset: 0x08 */ + __IO uint32_t LVCIDR; /*!< DSI Host LTDC VCID Register, Address offset: 0x0C */ + __IO uint32_t LCOLCR; /*!< DSI Host LTDC Color Coding Register, Address offset: 0x10 */ + __IO uint32_t LPCR; /*!< DSI Host LTDC Polarity Configuration Register, Address offset: 0x14 */ + __IO uint32_t LPMCR; /*!< DSI Host Low-Power Mode Configuration Register, Address offset: 0x18 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x1C - 0x2B */ + __IO uint32_t PCR; /*!< DSI Host Protocol Configuration Register, Address offset: 0x2C */ + __IO uint32_t GVCIDR; /*!< DSI Host Generic VCID Register, Address offset: 0x30 */ + __IO uint32_t MCR; /*!< DSI Host Mode Configuration Register, Address offset: 0x34 */ + __IO uint32_t VMCR; /*!< DSI Host Video Mode Configuration Register, Address offset: 0x38 */ + __IO uint32_t VPCR; /*!< DSI Host Video Packet Configuration Register, Address offset: 0x3C */ + __IO uint32_t VCCR; /*!< DSI Host Video Chunks Configuration Register, Address offset: 0x40 */ + __IO uint32_t VNPCR; /*!< DSI Host Video Null Packet Configuration Register, Address offset: 0x44 */ + __IO uint32_t VHSACR; /*!< DSI Host Video HSA Configuration Register, Address offset: 0x48 */ + __IO uint32_t VHBPCR; /*!< DSI Host Video HBP Configuration Register, Address offset: 0x4C */ + __IO uint32_t VLCR; /*!< DSI Host Video Line Configuration Register, Address offset: 0x50 */ + __IO uint32_t VVSACR; /*!< DSI Host Video VSA Configuration Register, Address offset: 0x54 */ + __IO uint32_t VVBPCR; /*!< DSI Host Video VBP Configuration Register, Address offset: 0x58 */ + __IO uint32_t VVFPCR; /*!< DSI Host Video VFP Configuration Register, Address offset: 0x5C */ + __IO uint32_t VVACR; /*!< DSI Host Video VA Configuration Register, Address offset: 0x60 */ + __IO uint32_t LCCR; /*!< DSI Host LTDC Command Configuration Register, Address offset: 0x64 */ + __IO uint32_t CMCR; /*!< DSI Host Command Mode Configuration Register, Address offset: 0x68 */ + __IO uint32_t GHCR; /*!< DSI Host Generic Header Configuration Register, Address offset: 0x6C */ + __IO uint32_t GPDR; /*!< DSI Host Generic Payload Data Register, Address offset: 0x70 */ + __IO uint32_t GPSR; /*!< DSI Host Generic Packet Status Register, Address offset: 0x74 */ + __IO uint32_t TCCR[6]; /*!< DSI Host Timeout Counter Configuration Register, Address offset: 0x78-0x8F */ + __IO uint32_t TDCR; /*!< DSI Host 3D Configuration Register, Address offset: 0x90 */ + __IO uint32_t CLCR; /*!< DSI Host Clock Lane Configuration Register, Address offset: 0x94 */ + __IO uint32_t CLTCR; /*!< DSI Host Clock Lane Timer Configuration Register, Address offset: 0x98 */ + __IO uint32_t DLTCR; /*!< DSI Host Data Lane Timer Configuration Register, Address offset: 0x9C */ + __IO uint32_t PCTLR; /*!< DSI Host PHY Control Register, Address offset: 0xA0 */ + __IO uint32_t PCONFR; /*!< DSI Host PHY Configuration Register, Address offset: 0xA4 */ + __IO uint32_t PUCR; /*!< DSI Host PHY ULPS Control Register, Address offset: 0xA8 */ + __IO uint32_t PTTCR; /*!< DSI Host PHY TX Triggers Configuration Register, Address offset: 0xAC */ + __IO uint32_t PSR; /*!< DSI Host PHY Status Register, Address offset: 0xB0 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0xB4 - 0xBB */ + __IO uint32_t ISR[2]; /*!< DSI Host Interrupt & Status Register, Address offset: 0xBC-0xC3 */ + __IO uint32_t IER[2]; /*!< DSI Host Interrupt Enable Register, Address offset: 0xC4-0xCB */ + uint32_t RESERVED2[3]; /*!< Reserved, 0xD0 - 0xD7 */ + __IO uint32_t FIR[2]; /*!< DSI Host Force Interrupt Register, Address offset: 0xD8-0xDF */ + uint32_t RESERVED3[8]; /*!< Reserved, 0xE0 - 0xFF */ + __IO uint32_t VSCR; /*!< DSI Host Video Shadow Control Register, Address offset: 0x100 */ + uint32_t RESERVED4[2]; /*!< Reserved, 0x104 - 0x10B */ + __IO uint32_t LCVCIDR; /*!< DSI Host LTDC Current VCID Register, Address offset: 0x10C */ + __IO uint32_t LCCCR; /*!< DSI Host LTDC Current Color Coding Register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, 0x114 */ + __IO uint32_t LPMCCR; /*!< DSI Host Low-power Mode Current Configuration Register, Address offset: 0x118 */ + uint32_t RESERVED6[7]; /*!< Reserved, 0x11C - 0x137 */ + __IO uint32_t VMCCR; /*!< DSI Host Video Mode Current Configuration Register, Address offset: 0x138 */ + __IO uint32_t VPCCR; /*!< DSI Host Video Packet Current Configuration Register, Address offset: 0x13C */ + __IO uint32_t VCCCR; /*!< DSI Host Video Chuncks Current Configuration Register, Address offset: 0x140 */ + __IO uint32_t VNPCCR; /*!< DSI Host Video Null Packet Current Configuration Register, Address offset: 0x144 */ + __IO uint32_t VHSACCR; /*!< DSI Host Video HSA Current Configuration Register, Address offset: 0x148 */ + __IO uint32_t VHBPCCR; /*!< DSI Host Video HBP Current Configuration Register, Address offset: 0x14C */ + __IO uint32_t VLCCR; /*!< DSI Host Video Line Current Configuration Register, Address offset: 0x150 */ + __IO uint32_t VVSACCR; /*!< DSI Host Video VSA Current Configuration Register, Address offset: 0x154 */ + __IO uint32_t VVBPCCR; /*!< DSI Host Video VBP Current Configuration Register, Address offset: 0x158 */ + __IO uint32_t VVFPCCR; /*!< DSI Host Video VFP Current Configuration Register, Address offset: 0x15C */ + __IO uint32_t VVACCR; /*!< DSI Host Video VA Current Configuration Register, Address offset: 0x160 */ + uint32_t RESERVED7[11]; /*!< Reserved, 0x164 - 0x18F */ + __IO uint32_t TDCCR; /*!< DSI Host 3D Current Configuration Register, Address offset: 0x190 */ + uint32_t RESERVED8[155]; /*!< Reserved, 0x194 - 0x3FF */ + __IO uint32_t WCFGR; /*!< DSI Wrapper Configuration Register, Address offset: 0x400 */ + __IO uint32_t WCR; /*!< DSI Wrapper Control Register, Address offset: 0x404 */ + __IO uint32_t WIER; /*!< DSI Wrapper Interrupt Enable Register, Address offset: 0x408 */ + __IO uint32_t WISR; /*!< DSI Wrapper Interrupt and Status Register, Address offset: 0x40C */ + __IO uint32_t WIFCR; /*!< DSI Wrapper Interrupt Flag Clear Register, Address offset: 0x410 */ + uint32_t RESERVED9; /*!< Reserved, 0x414 */ + __IO uint32_t WPCR[5]; /*!< DSI Wrapper PHY Configuration Register, Address offset: 0x418-0x42B */ + uint32_t RESERVED10; /*!< Reserved, 0x42C */ + __IO uint32_t WRPCR; /*!< DSI Wrapper Regulator and PLL Control Register, Address offset: 0x430 */ +} DSI_TypeDef; + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define RAMITCM_BASE 0x00000000U /*!< Base address of : 16KB RAM reserved for CPU execution/instruction accessible over ITCM */ +#define FLASHITCM_BASE 0x00200000U /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over ITCM */ +#define FLASHAXI_BASE 0x08000000U /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over AXI */ +#define RAMDTCM_BASE 0x20000000U /*!< Base address of : 128KB system data RAM accessible over DTCM */ +#define PERIPH_BASE 0x40000000U /*!< Base address of : AHB/ABP Peripherals */ +#define BKPSRAM_BASE 0x40024000U /*!< Base address of : Backup SRAM(4 KB) */ +#define QSPI_BASE 0x90000000U /*!< Base address of : QSPI memories accessible over AXI */ +#define FMC_R_BASE 0xA0000000U /*!< Base address of : FMC Control registers */ +#define QSPI_R_BASE 0xA0001000U /*!< Base address of : QSPI Control registers */ +#define SRAM1_BASE 0x20020000U /*!< Base address of : 368KB RAM1 accessible over AXI/AHB */ +#define SRAM2_BASE 0x2007C000U /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */ +#define FLASH_END 0x081FFFFFU /*!< FLASH end address */ + +/* Legacy define */ +#define FLASH_BASE FLASHAXI_BASE + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000U) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400U) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800U) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00U) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000U) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400U) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800U) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U) +#define CAN3_BASE (APB1PERIPH_BASE + 0x3400U) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000U) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400U) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800U) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00U) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000U) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U) +#define I2C4_BASE (APB1PERIPH_BASE + 0x6000U) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400U) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800U) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00U) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000U) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400U) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800U) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00U) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400U) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000U) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400U) +#define SDMMC2_BASE (APB2PERIPH_BASE + 0x1C00U) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100U) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200U) +#define ADC_BASE (APB2PERIPH_BASE + 0x2300U) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00U) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U) +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U) +#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U) +#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U) +#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000U) +#define SPI6_BASE (APB2PERIPH_BASE + 0x5400U) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800U) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00U) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004U) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024U) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004U) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024U) +#define LTDC_BASE (APB2PERIPH_BASE + 0x6800U) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84U) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104U) +#define DSI_BASE (APB2PERIPH_BASE + 0x6C00U) +#define DFSDM1_BASE (APB2PERIPH_BASE + 0x7400U) +#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x00U) +#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x20U) +#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x40U) +#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x60U) +#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x80U) +#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0xA0U) +#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0xC0U) +#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0xE0U) +#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x100U) +#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x180U) +#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x200U) +#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x280U) +#define MDIOS_BASE (APB2PERIPH_BASE + 0x7800U) +/*!< AHB1 peripherals */ +#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U) +#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U) +#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U) +#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U) +#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400U) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800U) +#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000U) +#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400U) +#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800U) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U) +#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U) +#define UID_BASE 0x1FF0F420U /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE 0x1FF0F442U /*!< FLASH Size register base address */ +#define PACKAGESIZE_BASE 0x1FFF7BF0U /*!< Package size register base address */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U) +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U) +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000U) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100U) +#define ETH_PTP_BASE (ETH_BASE + 0x0700U) +#define ETH_DMA_BASE (ETH_BASE + 0x1000U) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000U) +/*!< AHB2 peripherals */ +#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000U) +#define JPEG_BASE (AHB2PERIPH_BASE + 0x51000U) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800U) +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000U) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104U) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080U) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140U) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE 0xE0042000U + +/*!< USB registers base address */ +#define USB_OTG_HS_PERIPH_BASE 0x40040000U +#define USB_OTG_FS_PERIPH_BASE 0x50000000U + +#define USB_OTG_GLOBAL_BASE 0x000U +#define USB_OTG_DEVICE_BASE 0x800U +#define USB_OTG_IN_ENDPOINT_BASE 0x900U +#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U +#define USB_OTG_EP_REG_SIZE 0x20U +#define USB_OTG_HOST_BASE 0x400U +#define USB_OTG_HOST_PORT_BASE 0x440U +#define USB_OTG_HOST_CHANNEL_BASE 0x500U +#define USB_OTG_HOST_CHANNEL_SIZE 0x20U +#define USB_OTG_PCGCCTL_BASE 0xE00U +#define USB_OTG_FIFO_BASE 0x1000U +#define USB_OTG_FIFO_SIZE 0x1000U + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) +#define CAN3 ((CAN_TypeDef *) CAN3_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) +#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) +#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) +#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) +#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) +#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE) +#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE) +#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE) +#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE) +#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) +#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) +#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE) +#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE) +#define JPEG ((JPEG_TypeDef *) JPEG_BASE) +#define DSI ((DSI_TypeDef *)DSI_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD 0x00000001U /*!
© COPYRIGHT(c) 2016 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f7xx + * @{ + */ + +#ifndef __STM32F7xx_H +#define __STM32F7xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F7) +#define STM32F7 +#endif /* STM32F7 */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ +#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F767xx) && \ + !defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx) + /* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG, + STM32F756NG Devices */ + /* #define STM32F746xx */ /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG, + STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */ + /* #define STM32F745xx */ /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */ + /* #define STM32F765xx */ /*!< STM32F765BI, STM32F765BG, STM32F765NI, STM32F765NG, STM32F765II, STM32F765IG, + STM32F765ZI, STM32F765ZG, STM32F765VI, STM32F765VG Devices */ + /* #define STM32F767xx */ /*!< STM32F767BG, STM32F767BI, STM32F767IG, STM32F767II, STM32F767NG, STM32F767NI, + STM32F767VG, STM32F767VI, STM32F767ZG, STM32F767ZI, STM32F768AI Devices */ +#define STM32F769xx /*!< STM32F769AG, STM32F769AI, STM32F769BG, STM32F769BI, STM32F769IG, STM32F769II, + STM32F769NG, STM32F769NI Devices */ + /* #define STM32F777xx */ /*!< STM32F777VI, STM32F777ZI, STM32F777II, STM32F777BI, STM32F777NI, STM32F778AI Devices */ + /* #define STM32F779xx */ /*!< STM32F779II, STM32F779BI, STM32F779NI, STM32F779AI Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ +#define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V1.1.0 + */ +#define __STM32F7_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F7_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ +#define __STM32F7_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F7_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F7_CMSIS_VERSION ((__STM32F7_CMSIS_VERSION_MAIN << 24)\ + |(__STM32F7_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32F7_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32F7_CMSIS_VERSION)) +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ +#if defined(STM32F756xx) + #include "stm32f756xx.h" +#elif defined(STM32F746xx) + #include "stm32f746xx.h" +#elif defined(STM32F745xx) + #include "stm32f745xx.h" +#elif defined(STM32F765xx) + #include "stm32f765xx.h" +#elif defined(STM32F767xx) + #include "stm32f767xx.h" +#elif defined(STM32F769xx) + #include "stm32f769xx.h" +#elif defined(STM32F777xx) + #include "stm32f777xx.h" +#elif defined(STM32F779xx) + #include "stm32f779xx.h" +#else + #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + +/** @addtogroup Exported_macro + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + +/** + * @} + */ + +#ifdef USE_HAL_DRIVER + #include "stm32f7xx_hal_conf.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F7xx_H */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7xx_hal_conf.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7xx_hal_conf.h new file mode 100644 index 0000000000..a0e53e4351 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7xx_hal_conf.h @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf_template.h + * @author MCD Application Team + * @version V1.1.0 + * @date 22-April-2016 + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DCMI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_DMA2D_MODULE_ENABLED +#define HAL_ETH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +#define HAL_HASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_QSPI_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SPDIFRX_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED +#define HAL_DFSDM_MODULE_ENABLED +#define HAL_DSI_MODULE_ENABLED +#define HAL_JPEG_MODULE_ENABLED +#define HAL_MDIOS_MODULE_ENABLED + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 200U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11U) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12U) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.c b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.c new file mode 100644 index 0000000000..367ce072d4 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.c @@ -0,0 +1,852 @@ +/** + ****************************************************************************** + * @file system_stm32f7xx.c + * @author MCD Application Team + * @version V1.0.2 + * @date 21-September-2015 + * @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * This file configures the system clock as follows: + *----------------------------------------------------------------------------- + * System clock source | [1] PLL_HSE_XTAL | [2] PLL_HSI if [1] fails + * | (external 25MHz xtal) | (internal 16MHz clock) + *----------------------------------------------------------------------------- + * SYSCLK(MHz) | 216 | 216 + *----------------------------------------------------------------------------- + * AHBCLK (MHz) | 216 | 216 + *----------------------------------------------------------------------------- + * APB1CLK (MHz) | 54 | 54 + *----------------------------------------------------------------------------- + * APB2CLK (MHz) | 108 | 108 + *----------------------------------------------------------------------------- + * USB capable | YES | NO + * with 48 MHz precise clock | | + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f7xx_system + * @{ + */ + +/** @addtogroup STM32F7xx_System_Private_Includes + * @{ + */ + +#include "stm32f7xx.h" +#include "hal_tick.h" + +HAL_StatusTypeDef HAL_Init(void); + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted + on STMicroelectronics EVAL/Discovery boards as data memory */ +/*!< In case of EVAL/Discovery’s LCD use in application code, the DATA_IN_ExtSDRAM define + need to be added in the project preprocessor to avoid SDRAM multiple configuration + (the LCD uses SDRAM as frame buffer, and its configuration is done by the BSP_SDRAM_Init()) */ +/* #define DATA_IN_ExtSRAM */ +/* #define DATA_IN_ExtSDRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Macros + * @{ + */ + +/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */ +#define USE_PLL_HSE_EXTC (1) /* Use external clock */ +#define USE_PLL_HSE_XTAL (1) /* Use external xtal */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Variables + * @{ + */ + + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = HSI_VALUE; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes + * @{ + */ +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif + +uint8_t SetSysClock_PLL_HSI(void); + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemFrequency variable. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + + /* Configure the Cube driver */ + SystemCoreClock = HSI_VALUE; // At this stage the HSI is used as system clock + HAL_Init(); + + // Enable CPU L1-Cache + SCB_EnableICache(); + SCB_EnableDCache(); + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings */ + SetSysClock(); + + /* Reset the timer to avoid issues after the RAM initialization */ + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f7xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f7xx.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f7xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0; +#if defined (DATA_IN_ExtSDRAM) && defined (DATA_IN_ExtSRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + + /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x55550545; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x55554145; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCCC000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xFF800FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x55400555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CC00CC; + GPIOG->AFR[1] = 0xC00000CC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x80220AAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0x80320FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x40110555; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x55550450; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00145555; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[4] = 0x00001091; + FMC_Bank1->BTCR[5] = 0x00110212; + FMC_Bank1E->BWTR[4] = 0x0FFFFFFF; + + /* Configure and enable SDRAM bank1 */ + FMC_Bank5_6->SDCR[0] = 0x000019E5; + FMC_Bank5_6->SDTR[0] = 0x01116361; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x000000F3; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); + +#elif defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + + /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x50150005; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x55554005; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCCC000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x55400555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CC00CC; + GPIOG->AFR[1] = 0xC000000C; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x80020A0A; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0x80020A0A; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x40010505; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x55550450; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00145555; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable SDRAM bank1 */ + FMC_Bank5_6->SDCR[0] = 0x000019E5; + FMC_Bank5_6->SDTR[0] = 0x01116361; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x000000F3; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); + +#elif defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x55550545; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x55554145; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x55000555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00200AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00100555; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[4] = 0x00001091; + FMC_Bank1->BTCR[5] = 0x00110212; + FMC_Bank1E->BWTR[4] = 0x0FFFFFFF; + +#endif /* DATA_IN_ExtSRAM */ + + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +void SetSysClock(void) +{ + /* 1- Try to start with HSE and external clock */ +#if USE_PLL_HSE_EXTC != 0 + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { + /* 2- If fail try to start with HSE and external xtal */ + #if USE_PLL_HSE_XTAL != 0 + if (SetSysClock_PLL_HSE(0) == 0) + #endif + { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) + { + while(1) + { + // [TODO] Put something here to tell the user that a problem occured... + } + } + } + } + + // Output clock on MCO2 pin(PC9) for debugging purpose + // Can be visualized on CN8 connector pin 4 + //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 216 MHz / 4 = 54 MHz +} + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + // Enable power clock + __PWR_CLK_ENABLE(); + + // Enable HSE oscillator and activate PLL with HSE as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == 0) + { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External xtal on OSC_IN/OSC_OUT */ + } + else + { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External clock on OSC_IN */ + } + // Warning: this configuration is for a 8 MHz xtal clock only + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 25; // VCO input clock = 1 MHz (25 MHz / 25) + RCC_OscInitStruct.PLL.PLLN = 432; // VCO output clock = 432 MHz (1 MHz * 432) + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2) + RCC_OscInitStruct.PLL.PLLQ = 9; // USB clock = 48 MHz (432 MHz / 9) --> OK for USB + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Activate the OverDrive to reach the 216 MHz Frequency + if (HAL_PWREx_EnableOverDrive() != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 216 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; // 54 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 108 MHz + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) + { + return 0; // FAIL + } + + return 1; // OK +} +#endif + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + // Enable CPU L1-Cache + SCB_EnableICache(); + SCB_EnableDCache(); + + // Enable power clock + __PWR_CLK_ENABLE(); + + // Enable HSI oscillator and activate PLL with HSI as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSICalibrationValue = 16; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16) + RCC_OscInitStruct.PLL.PLLN = 432; // VCO output clock = 432 MHz (1 MHz * 432) + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2) + RCC_OscInitStruct.PLL.PLLQ = 9; // USB clock = 48 MHz (432 MHz / 9) --> OK for USB + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Activate the OverDrive to reach the 216 MHz Frequency + if (HAL_PWREx_EnableOverDrive() != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 216 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; // 54 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 108 MHz + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) + { + return 0; // FAIL + } + + return 1; // OK +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.h new file mode 100644 index 0000000000..f452d4d8e5 --- /dev/null +++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/system_stm32f7xx.h @@ -0,0 +1,126 @@ +/** + ****************************************************************************** + * @file system_stm32f7xx.h + * @author MCD Application Team + * @version V1.1.0 + * @date 22-April-2016 + * @brief CMSIS Cortex-M7 Device System Source File for STM32F7xx devices. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f7xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F7XX_H +#define __SYSTEM_STM32F7XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F7xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F7xx_System_Exported_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ + + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +extern void SetSysClock(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F7XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h new file mode 100644 index 0000000000..1dda91b05a --- /dev/null +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h @@ -0,0 +1,99 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ADC_1 = (int)ADC1_BASE, + ADC_2 = (int)ADC2_BASE, + ADC_3 = (int)ADC3_BASE +} ADCName; + +typedef enum { + DAC_1 = DAC_BASE +} DACName; + +typedef enum { + UART_1 = (int)USART1_BASE, + UART_2 = (int)USART2_BASE, + UART_3 = (int)USART3_BASE, + UART_4 = (int)UART4_BASE, + UART_5 = (int)UART5_BASE, + UART_6 = (int)USART6_BASE, + UART_7 = (int)UART7_BASE, + UART_8 = (int)UART8_BASE +} UARTName; + +#define STDIO_UART_TX PA_9 +#define STDIO_UART_RX PA_10 +#define STDIO_UART UART_1 + +typedef enum { + SPI_1 = (int)SPI1_BASE, + SPI_2 = (int)SPI2_BASE, + SPI_3 = (int)SPI3_BASE, + SPI_4 = (int)SPI4_BASE, + SPI_5 = (int)SPI5_BASE, + SPI_6 = (int)SPI6_BASE +} SPIName; + +typedef enum { + I2C_1 = (int)I2C1_BASE, + I2C_2 = (int)I2C2_BASE, + I2C_3 = (int)I2C3_BASE, + I2C_4 = (int)I2C4_BASE +} I2CName; + +typedef enum { + PWM_1 = (int)TIM1_BASE, + PWM_2 = (int)TIM2_BASE, + PWM_3 = (int)TIM3_BASE, + PWM_4 = (int)TIM4_BASE, + PWM_5 = (int)TIM5_BASE, + PWM_8 = (int)TIM8_BASE, + PWM_9 = (int)TIM9_BASE, + PWM_10 = (int)TIM10_BASE, + PWM_11 = (int)TIM11_BASE, + PWM_12 = (int)TIM12_BASE, + PWM_13 = (int)TIM13_BASE, + PWM_14 = (int)TIM14_BASE +} PWMName; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c new file mode 100644 index 0000000000..ee6791c4b6 --- /dev/null +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c @@ -0,0 +1,193 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#include "PeripheralPins.h" + +// ============================================================================= +// Notes: +// * Commented lines are alternative possibilities which are not used per default. +// If you change them, you will have also to modify the corresponding xxx_api.c file +// for pwmout, analogin, analogout, ... +// * Only the pins that are placed on the Arduino connector are described. +// ============================================================================= + +//*** ADC *** + +const PinMap PinMap_ADC[] = { + {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - ARDUINO A1 + {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO A0 + {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC1_IN12 - ARDUINO A2 + {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - ARDUINO D3 + {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - ARDUINO D6 + {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - ARDUINO A4 + {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - ARDUINO A5 + {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A3 + + {NC, NC, 0} +}; + +//*** DAC *** + +const PinMap PinMap_DAC[] = { + {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1 (ARDUINO A1) + // {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2 - used by USB3320C + {NC, NC, 0} +}; + +//*** I2C *** + +const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // used by Audio_SDA + {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14/SDA + {NC, NC, 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14/SCL + {PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // used by Audio_SCL + {PH_6, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4 )}, // ARDUINO D9 + {NC, NC, 0} +}; + +//*** PWM *** + +const PinMap PinMap_PWM[] = { + {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO A0 + // {PA_6, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A0 + {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - ARDUINO D10 + + {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - ARDUINO D15 + // {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO D15 + {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - ARDUINO D14 + // {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D14 + // {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - ARDUINO D12 + // {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - ARDUINO D12 + {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D12 + // {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - ARDUINO D11 + // {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - ARDUINO D11 + {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - ARDUINO D11 + + {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - ARDUINO D1 + // {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D1 + {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D0 + // {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D0 + {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - ARDUINO D5 + // {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 - ARDUINO D5 + + {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO D3 + {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D6 + {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A4 + {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - ARDUINO A5 + + {PH_6, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D9 + {NC, NC, 0} +}; + +//*** SERIAL *** + +const PinMap PinMap_UART_TX[] = { + {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by stlink usb) + {PB_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)}, // ARDUINO D14 + {PB_14, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D12 + {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1 + {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5 )}, // WIFI_RX + {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO D6 + {NC, NC, 0} +}; + +const PinMap PinMap_UART_RX[] = { + {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by st-link usb) + {PB_8, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D15 + {PB_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D11 + {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0 + {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5 )}, // WIFI_TX + {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO D3 + {NC, NC, 0} +}; + +const PinMap PinMap_UART_RTS[] = { + {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // ARDUINO D13 + {PB_14, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4 )}, // ARDUINO D12 + // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART3 )}, // ARDUINO D12 + {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D5 + {PF_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO A4 + {NC, NC, 0} +}; + +const PinMap PinMap_UART_CTS[] = { + {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // ARDUINO D10 + {PB_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4 )}, // ARDUINO D11 + {PF_9, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO A5 + {NC, NC, 0} +}; + +//*** SPI *** + +const PinMap PinMap_SPI_MOSI[] = { + {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D11 + {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI3)}, // SD card + {PD_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card + {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A5 + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO A0 + // {PA_6, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)}, // ARDUINO A0 + {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card + // {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // SD card + // {PB_4, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)}, // SD card + {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D12 + {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO A2 + {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A4 + {PG_9, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SCLK[] = { + {PA_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D13 + {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card + // {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + // {PB_3, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)}, + {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D6 + {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D9 + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO A1 + // {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D10 + {PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)}, // SD card + {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14 + {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D3 + {PG_10, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card + {NC, NC, 0} +}; diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h new file mode 100644 index 0000000000..67e100c8af --- /dev/null +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h @@ -0,0 +1,317 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7))) + +#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7) |\ + ((CHANNEL & 0x0F) << 11) |\ + ((INVERTED & 0x01) << 15))) + +#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) +#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) +#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) +#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) +#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) + +#define STM_MODE_INPUT (0) +#define STM_MODE_OUTPUT_PP (1) +#define STM_MODE_OUTPUT_OD (2) +#define STM_MODE_AF_PP (3) +#define STM_MODE_AF_OD (4) +#define STM_MODE_ANALOG (5) +#define STM_MODE_IT_RISING (6) +#define STM_MODE_IT_FALLING (7) +#define STM_MODE_IT_RISING_FALLING (8) +#define STM_MODE_EVT_RISING (9) +#define STM_MODE_EVT_FALLING (10) +#define STM_MODE_EVT_RISING_FALLING (11) +#define STM_MODE_IT_EVT_RESET (12) + +// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K) +// Low nibble = pin number +#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) +#define STM_PIN(X) ((uint32_t)(X) & 0xF) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_0 = 0x30, + PD_1 = 0x31, + PD_2 = 0x32, + PD_3 = 0x33, + PD_4 = 0x34, + PD_5 = 0x35, + PD_6 = 0x36, + PD_7 = 0x37, + PD_8 = 0x38, + PD_9 = 0x39, + PD_10 = 0x3A, + PD_11 = 0x3B, + PD_12 = 0x3C, + PD_13 = 0x3D, + PD_14 = 0x3E, + PD_15 = 0x3F, + + PE_0 = 0x40, + PE_1 = 0x41, + PE_2 = 0x42, + PE_3 = 0x43, + PE_4 = 0x44, + PE_5 = 0x45, + PE_6 = 0x46, + PE_7 = 0x47, + PE_8 = 0x48, + PE_9 = 0x49, + PE_10 = 0x4A, + PE_11 = 0x4B, + PE_12 = 0x4C, + PE_13 = 0x4D, + PE_14 = 0x4E, + PE_15 = 0x4F, + + PF_0 = 0x50, + PF_1 = 0x51, + PF_2 = 0x52, + PF_3 = 0x53, + PF_4 = 0x54, + PF_5 = 0x55, + PF_6 = 0x56, + PF_7 = 0x57, + PF_8 = 0x58, + PF_9 = 0x59, + PF_10 = 0x5A, + PF_11 = 0x5B, + PF_12 = 0x5C, + PF_13 = 0x5D, + PF_14 = 0x5E, + PF_15 = 0x5F, + + PG_0 = 0x60, + PG_1 = 0x61, + PG_2 = 0x62, + PG_3 = 0x63, + PG_4 = 0x64, + PG_5 = 0x65, + PG_6 = 0x66, + PG_7 = 0x67, + PG_8 = 0x68, + PG_9 = 0x69, + PG_10 = 0x6A, + PG_11 = 0x6B, + PG_12 = 0x6C, + PG_13 = 0x6D, + PG_14 = 0x6E, + PG_15 = 0x6F, + + PH_0 = 0x70, + PH_1 = 0x71, + PH_2 = 0x72, + PH_3 = 0x73, + PH_4 = 0x74, + PH_5 = 0x75, + PH_6 = 0x76, + PH_7 = 0x77, + PH_8 = 0x78, + PH_9 = 0x79, + PH_10 = 0x7A, + PH_11 = 0x7B, + PH_12 = 0x7C, + PH_13 = 0x7D, + PH_14 = 0x7E, + PH_15 = 0x7F, + + PI_0 = 0x80, + PI_1 = 0x81, + PI_2 = 0x82, + PI_3 = 0x83, + PI_4 = 0x84, + PI_5 = 0x85, + PI_6 = 0x86, + PI_7 = 0x87, + PI_8 = 0x88, + PI_9 = 0x89, + PI_10 = 0x8A, + PI_11 = 0x8B, + PI_12 = 0x8C, + PI_13 = 0x8D, + PI_14 = 0x8E, + PI_15 = 0x8F, + + PJ_0 = 0x90, + PJ_1 = 0x91, + PJ_2 = 0x92, + PJ_3 = 0x93, + PJ_4 = 0x94, + PJ_5 = 0x95, + PJ_6 = 0x96, + PJ_7 = 0x97, + PJ_8 = 0x98, + PJ_9 = 0x99, + PJ_10 = 0x9A, + PJ_11 = 0x9B, + PJ_12 = 0x9C, + PJ_13 = 0x9D, + PJ_14 = 0x9E, + PJ_15 = 0x9F, + + PK_0 = 0xA0, + PK_1 = 0xA1, + PK_2 = 0xA2, + PK_3 = 0xA3, + PK_4 = 0xA4, + PK_5 = 0xA5, + PK_6 = 0xA6, + PK_7 = 0xA7, + + // Arduino connector namings + A0 = PA_6, + A1 = PA_4, + A2 = PC_2, + A3 = PF_10, + A4 = PF_8, + A5 = PF_9, + D0 = PC_7, + D1 = PC_6, + D2 = PJ_1, + D3 = PF_6, + D4 = PJ_0, + D5 = PC_8, + D6 = PF_7, + D7 = PI_3, + D8 = PJ_4, + D9 = PH_6, + D10 = PA_11, + D11 = PB_15, + D12 = PB_14, + D13 = PA_12, + D14 = PB_9, + D15 = PB_8, + + // Generic signals namings + LED1 = PJ_13, // LD1 = RED + LED2 = PJ_5, // LD2 = GREEN + LED3 = PA_12, // LD3 = GREEN + LED4 = PJ_13, + USER_BUTTON = PA_0, + SERIAL_TX = PA_9, // Virtual Com Port + SERIAL_RX = PA_10, // Virtual Com Port + USBTX = PA_9, // Virtual Com Port + USBRX = PA_10, // Virtual Com Port + I2C_SCL = D15, + I2C_SDA = D14, + SPI_MOSI = D11, + SPI_MISO = D12, + SPI_SCK = D13, + SPI_CS = D10, + PWM_OUT = D9, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullUp = 1, + PullDown = 2, + OpenDrain = 3, + PullDefault = PullNone +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PortNames.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PortNames.h new file mode 100644 index 0000000000..e875a51cdc --- /dev/null +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PortNames.h @@ -0,0 +1,54 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PORTNAMES_H +#define MBED_PORTNAMES_H + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PortA = 0, + PortB = 1, + PortC = 2, + PortD = 3, + PortE = 4, + PortF = 5, + PortG = 6, + PortH = 7, + PortI = 8, // kept for compilation + PortJ = 9, // kept for compilation + PortK = 10 // kept for compilation +} PortName; + +#ifdef __cplusplus +} +#endif +#endif diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/device.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/device.h new file mode 100644 index 0000000000..bdad16c6f1 --- /dev/null +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/device.h @@ -0,0 +1,54 @@ +// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches. +// Check the 'features' section of the target description in 'targets.json' for more details. +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + + + + + + + + + + + +//======================================= + +#define DEVICE_ID_LENGTH 24 + + + + +#include "objects.h" + +#endif diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h new file mode 100644 index 0000000000..31d8c73cb8 --- /dev/null +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h @@ -0,0 +1,111 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_OBJECTS_H +#define MBED_OBJECTS_H + +#include "cmsis.h" +#include "PortNames.h" +#include "PeripheralNames.h" +#include "PinNames.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct gpio_irq_s { + IRQn_Type irq_n; + uint32_t irq_index; + uint32_t event; + PinName pin; +}; + +struct port_s { + PortName port; + uint32_t mask; + PinDirection direction; + __IO uint32_t *reg_in; + __IO uint32_t *reg_out; +}; + +struct analogin_s { + ADCName adc; + PinName pin; + uint8_t channel; +}; + +struct dac_s { + DACName dac; + PinName pin; + uint32_t channel; +}; + +struct serial_s { + UARTName uart; + int index; // Used by irq + uint32_t baudrate; + uint32_t databits; + uint32_t stopbits; + uint32_t parity; + PinName pin_tx; + PinName pin_rx; +#if DEVICE_SERIAL_FC + uint32_t hw_flow_ctl; + PinName pin_rts; + PinName pin_cts; +#endif +}; + +struct spi_s { + SPIName spi; + uint32_t bits; + uint32_t cpol; + uint32_t cpha; + uint32_t mode; + uint32_t nss; + uint32_t br_presc; + PinName pin_miso; + PinName pin_mosi; + PinName pin_sclk; + PinName pin_ssel; +}; + +struct i2c_s { + I2CName i2c; + uint32_t slave; +}; + +#include "gpio_object.h" +#include "common_objects.h" + +#ifdef __cplusplus +} +#endif + +#endif From 54adfe10c04ffc69b0efab631e5e80f5daa8a6dd Mon Sep 17 00:00:00 2001 From: ohagendorf Date: Sat, 20 Aug 2016 20:15:19 +0200 Subject: [PATCH 2/7] [disco_f769ni] adding rtos lib --- rtos/rtx/TARGET_CORTEX_M/RTX_CM_lib.h | 3 +++ rtos/rtx/TARGET_CORTEX_M/RTX_Conf_CM.c | 6 +++--- tools/tests.py | 16 ++++++++-------- 3 files changed, 14 insertions(+), 11 deletions(-) diff --git a/rtos/rtx/TARGET_CORTEX_M/RTX_CM_lib.h b/rtos/rtx/TARGET_CORTEX_M/RTX_CM_lib.h index 6e76cd651b..14b427c5d3 100644 --- a/rtos/rtx/TARGET_CORTEX_M/RTX_CM_lib.h +++ b/rtos/rtx/TARGET_CORTEX_M/RTX_CM_lib.h @@ -574,6 +574,9 @@ osThreadDef_t os_thread_def_main = {(os_pthread)pre_main, osPriorityNormal, 1U, #elif (defined(TARGET_STM32F767ZI)) #define INITIAL_SP (0x20080000UL) +#elif (defined(TARGET_STM32F769NI)) +#define INITIAL_SP (0x20080000UL) + #elif defined(TARGET_NUMAKER_PFM_NUC472) # if defined(__CC_ARM) extern uint32_t Image$$ARM_LIB_HEAP$$Base[]; diff --git a/rtos/rtx/TARGET_CORTEX_M/RTX_Conf_CM.c b/rtos/rtx/TARGET_CORTEX_M/RTX_Conf_CM.c index f14e432122..562f1addd0 100755 --- a/rtos/rtx/TARGET_CORTEX_M/RTX_Conf_CM.c +++ b/rtos/rtx/TARGET_CORTEX_M/RTX_Conf_CM.c @@ -52,7 +52,7 @@ || defined(TARGET_STM32F410RB) || defined(TARGET_KL46Z) || defined(TARGET_KL43Z) || defined(TARGET_STM32F407) || defined(TARGET_F407VG) || defined(TARGET_STM32F303VC) || defined(TARGET_LPC1549) || defined(TARGET_LPC11U68) \ || defined(TARGET_STM32F411RE) || defined(TARGET_STM32F207ZG) || defined(TARGET_STM32F405RG) || defined(TARGET_K22F) || defined(TARGET_STM32F429ZI) || defined(TARGET_STM32F401VC) || defined(TARGET_MAX32610) || defined(TARGET_MAX32600) || defined(TARGET_MAX32620) || defined(TARGET_TEENSY3_1) \ || defined(TARGET_STM32L152RE) || defined(TARGET_STM32F446RE) || defined(TARGET_STM32F446VE) || defined(TARGET_STM32F446ZE) || defined(TARGET_STM32L432KC) || defined(TARGET_STM32L476VG) || defined(TARGET_STM32L476RG) || defined(TARGET_STM32F469NI) || defined(TARGET_STM32F746NG) || defined(TARGET_STM32F746ZG) || defined(TARGET_STM32L152RC) \ - || defined(TARGET_EFM32GG_STK3700) || defined(TARGET_EFM32WG_STK3800) || defined(TARGET_EFM32LG_STK3600) || defined(TARGET_EFM32PG_STK3401) || defined(TARGET_STM32F767ZI) \ + || defined(TARGET_EFM32GG_STK3700) || defined(TARGET_EFM32WG_STK3800) || defined(TARGET_EFM32LG_STK3600) || defined(TARGET_EFM32PG_STK3401) || defined(TARGET_STM32F767ZI) || defined(TARGET_STM32F769NI) \ || defined(TARGET_NUMAKER_PFM_NUC472) || defined(TARGET_NCS36510) # define OS_TASKCNT 14 # elif defined(TARGET_LPC11U24) || defined(TARGET_STM32F303RE) || defined(TARGET_STM32F303ZE) || defined(TARGET_STM32F303K8) || defined(TARGET_LPC11U35_401) || defined(TARGET_LPC11U35_501) || defined(TARGET_LPCCAPPUCCINO) || defined(TARGET_LPC1114) \ @@ -88,7 +88,7 @@ || defined(TARGET_STM32F410RB) || defined(TARGET_KL46Z) || defined(TARGET_KL43Z) || defined(TARGET_STM32F407) || defined(TARGET_F407VG) || defined(TARGET_STM32F303VC) || defined(TARGET_LPC1549) || defined(TARGET_LPC11U68) \ || defined(TARGET_STM32F411RE) || defined(TARGET_STM32F405RG) || defined(TARGET_K22F) || defined(TARGET_STM32F429ZI) || defined(TARGET_STM32F401VC) || defined(TARGET_MAX32610) || defined(TARGET_MAX32600) || defined(TARGET_MAX32620) || defined(TARGET_TEENSY3_1) \ || defined(TARGET_STM32L152RE) || defined(TARGET_STM32F446RE) || defined(TARGET_STM32F446VE) || defined(TARGET_STM32F446ZE) || defined(TARGET_STM32L432KC) || defined(TARGET_STM32L476VG) || defined(TARGET_STM32L476RG) || defined(TARGET_STM32F469NI) || defined(TARGET_STM32F746NG) || defined(TARGET_STM32F746ZG) || defined(TARGET_STM32L152RC) \ - ||defined(TARGET_EFM32GG_STK3700) || defined(TARGET_STM32F767ZI) || defined(TARGET_STM32F207ZG) \ + ||defined(TARGET_EFM32GG_STK3700) || defined(TARGET_STM32F767ZI) || defined(TARGET_STM32F207ZG) || defined(TARGET_STM32F769NI) \ || defined(TARGET_NUMAKER_PFM_NUC472) || defined(TARGET_NCS36510) # define OS_MAINSTKSIZE 256 # elif defined(TARGET_LPC11U24) || defined(TARGET_LPC11U35_401) || defined(TARGET_LPC11U35_501) || defined(TARGET_LPCCAPPUCCINO) || defined(TARGET_LPC1114) \ @@ -227,7 +227,7 @@ #elif defined(TARGET_STM32F401VC) # define OS_CLOCK 84000000 -# elif defined(TARGET_STM32F746NG) || defined(TARGET_STM32F746ZG) || defined(TARGET_STM32F767ZI) +# elif defined(TARGET_STM32F746NG) || defined(TARGET_STM32F746ZG) || defined(TARGET_STM32F767ZI) || defined(TARGET_STM32F769NI) # define OS_CLOCK 216000000 #elif defined(TARGET_MAX32610) || defined(TARGET_MAX32600) diff --git a/tools/tests.py b/tools/tests.py index 49e5e82ffa..0fdd563acd 100644 --- a/tools/tests.py +++ b/tools/tests.py @@ -747,7 +747,7 @@ TESTS = [ "NUCLEO_L031K6", "NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC", "NUCLEO_L432KC", "DISCO_L476VG", "NUCLEO_L476RG", "DISCO_F401VC", "NUCLEO_F303RE", "NUCLEO_F303ZE", "NUCLEO_F303K8", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE", "NUCLEO_F446ZE", "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_2", "description": "Mutex resource lock", @@ -763,7 +763,7 @@ TESTS = [ "DISCO_F401VC", "NUCLEO_F303RE", "NUCLEO_F303K8", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE", "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F446ZE", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_3", "description": "Semaphore resource lock", @@ -780,7 +780,7 @@ TESTS = [ "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_4", "description": "Signals messaging", @@ -796,7 +796,7 @@ TESTS = [ "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_5", "description": "Queue messaging", @@ -811,7 +811,7 @@ TESTS = [ "DISCO_F401VC", "NUCLEO_F303RE", "NUCLEO_F303K8", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE", "NUCLEO_F446ZE", "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_6", "description": "Mail messaging", @@ -826,7 +826,7 @@ TESTS = [ "DISCO_F401VC", "NUCLEO_F303RE", "NUCLEO_F303K8", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE", "NUCLEO_F446ZE", "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_7", "description": "Timer", @@ -843,7 +843,7 @@ TESTS = [ "DISCO_F401VC", "NUCLEO_F303RE", "NUCLEO_F303K8", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE", "NUCLEO_F446ZE", "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_8", "description": "ISR (Queue)", @@ -858,7 +858,7 @@ TESTS = [ "DISCO_F401VC", "NUCLEO_F303RE", "NUCLEO_F303K8", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE", "NUCLEO_F446ZE", "NUCLEO_F103RB", "DISCO_F746NG", "NUCLEO_F746ZG", "MOTE_L152RC", "B96B_F446VE", "EFM32HG_STK3400", "EFM32PG_STK3401", "EFM32LG_STK3600", "EFM32GG_STK3700", "EFM32WG_STK3800", - "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI"], + "NRF51822", "NRF51_DK", "SEEED_TINY_BLE", "ARM_BEETLE_SOC", "NUCLEO_F767ZI", "DISCO_F769NI"], }, { "id": "RTOS_9", "description": "SD File write-read", From 3598af00c7da0befe04dbff35af83dabcb235c29 Mon Sep 17 00:00:00 2001 From: ohagendorf Date: Sat, 20 Aug 2016 20:16:52 +0200 Subject: [PATCH 3/7] [disco_f769ni] adding to build_travis --- tools/build_travis.py | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/build_travis.py b/tools/build_travis.py index 1014b87192..fa107283dd 100644 --- a/tools/build_travis.py +++ b/tools/build_travis.py @@ -81,6 +81,7 @@ build_list = ( { "target": "DISCO_F429ZI", "toolchains": "GCC_ARM", "libs": ["dsp", "rtos", "fat"] }, { "target": "DISCO_F469NI", "toolchains": "GCC_ARM", "libs": ["dsp", "rtos", "fat"] }, { "target": "DISCO_F746NG", "toolchains": "GCC_ARM", "libs": ["dsp", "fat"] }, + { "target": "DISCO_F769NI", "toolchains": "GCC_ARM", "libs": ["dsp", "rtos", "fat"] }, { "target": "LPC1114", "toolchains": "GCC_ARM", "libs": ["dsp", "rtos", "fat"] }, { "target": "LPC11U35_401", "toolchains": "GCC_ARM", "libs": ["dsp", "rtos", "fat"] }, From 95c5b78f347ff417d70f7a003ae0de44d93a0991 Mon Sep 17 00:00:00 2001 From: ohagendorf Date: Sat, 20 Aug 2016 23:59:14 +0200 Subject: [PATCH 4/7] [disco_f769ni] adding gcc_arm exporter definitions --- tools/export/gcc_arm_disco_f769ni.tmpl | 1 + tools/export/gccarm.py | 1 + 2 files changed, 2 insertions(+) create mode 100644 tools/export/gcc_arm_disco_f769ni.tmpl diff --git a/tools/export/gcc_arm_disco_f769ni.tmpl b/tools/export/gcc_arm_disco_f769ni.tmpl new file mode 100644 index 0000000000..6e616cc884 --- /dev/null +++ b/tools/export/gcc_arm_disco_f769ni.tmpl @@ -0,0 +1 @@ +{% extends "gcc_arm_common.tmpl" %} diff --git a/tools/export/gccarm.py b/tools/export/gccarm.py index 7b70e0a5cd..71d4fdbf30 100644 --- a/tools/export/gccarm.py +++ b/tools/export/gccarm.py @@ -53,6 +53,7 @@ class GccArm(Exporter): 'DISCO_F469NI', 'DISCO_F303VC', 'DISCO_F746NG', + 'DISCO_F769NI', 'DISCO_L476VG', 'UBLOX_C027', 'ARCH_PRO', From 05fc5f15a0316d850d3bcebecb200c821b78974c Mon Sep 17 00:00:00 2001 From: ohagendorf Date: Wed, 31 Aug 2016 18:05:59 +0200 Subject: [PATCH 5/7] disco_f769 some rework ... as suggested by adustm --- .../TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c | 8 +++++--- .../TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h | 2 +- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c index ee6791c4b6..828d894dd4 100644 --- a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c @@ -41,9 +41,12 @@ //*** ADC *** const PinMap PinMap_ADC[] = { - {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - ARDUINO A1 - {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO A0 + // {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - ARDUINO A1 + {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - ARDUINO A1 + // {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO A0 + {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - ARDUINO A0 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC1_IN12 - ARDUINO A2 + // {PC_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC2_IN12 - ARDUINO A2 {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - ARDUINO D3 {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - ARDUINO D6 {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - ARDUINO A4 @@ -72,7 +75,6 @@ const PinMap PinMap_I2C_SDA[] = { const PinMap PinMap_I2C_SCL[] = { {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14/SCL {PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // used by Audio_SCL - {PH_6, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4 )}, // ARDUINO D9 {NC, NC, 0} }; diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h index 67e100c8af..157f900b80 100644 --- a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h @@ -270,7 +270,7 @@ typedef enum { D4 = PJ_0, D5 = PC_8, D6 = PF_7, - D7 = PI_3, + D7 = PJ_3, D8 = PJ_4, D9 = PH_6, D10 = PA_11, From d0e2f1efa6de02e1d522a025995d16f7b1de9edd Mon Sep 17 00:00:00 2001 From: ohagendorf Date: Wed, 31 Aug 2016 18:40:02 +0200 Subject: [PATCH 6/7] disco_f769 some rework ... (part II) as suggested by adustm --- hal/targets.json | 3 +- .../TARGET_DISCO_F769NI/PeripheralNames.h | 5 ++++ .../TARGET_DISCO_F769NI/PeripheralPins.c | 30 ++++++++++++++----- .../TARGET_DISCO_F769NI/objects.h | 5 ++++ libraries/tests/mbed/can_loopback/main.cpp | 9 +++--- tools/tests.py | 6 ++-- 6 files changed, 44 insertions(+), 14 deletions(-) diff --git a/hal/targets.json b/hal/targets.json index 3333088405..c12f50d2a3 100644 --- a/hal/targets.json +++ b/hal/targets.json @@ -1114,7 +1114,8 @@ "default_toolchain": "ARM", "progen": {"target": "disco-f769ni"}, "detect_code": ["0817"], - "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"], + "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"], + "features": ["IPV4"], "release_versions": ["2"] }, "DISCO_L476VG": { diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h index 1dda91b05a..0dde5d66ed 100644 --- a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralNames.h @@ -92,6 +92,11 @@ typedef enum { PWM_14 = (int)TIM14_BASE } PWMName; +typedef enum { + CAN_1 = (int)CAN1_BASE, + CAN_2 = (int)CAN2_BASE +} CANName; + #ifdef __cplusplus } #endif diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c index 828d894dd4..dd9c99a92c 100644 --- a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PeripheralPins.c @@ -116,7 +116,8 @@ const PinMap PinMap_PWM[] = { const PinMap PinMap_UART_TX[] = { {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by stlink usb) - {PB_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)}, // ARDUINO D14 + // {PA_12, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4 )}, // ARDUINO D13 - remove SB15 to use it + {PB_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)}, // ARDUINO D14 {PB_14, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D12 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1 {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5 )}, // WIFI_RX @@ -126,7 +127,8 @@ const PinMap PinMap_UART_TX[] = { const PinMap PinMap_UART_RX[] = { {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by st-link usb) - {PB_8, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D15 + {PA_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4 )}, // ARDUINO D10 + {PB_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D15 {PB_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D11 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0 {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5 )}, // WIFI_TX @@ -135,11 +137,11 @@ const PinMap PinMap_UART_RX[] = { }; const PinMap PinMap_UART_RTS[] = { - {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // ARDUINO D13 - {PB_14, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4 )}, // ARDUINO D12 - // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART3 )}, // ARDUINO D12 - {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D5 - {PF_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO A4 + {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1 )}, // ARDUINO D13 + {PB_14, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4 )}, // ARDUINO D12 + // {PB_14, USART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3 )}, // ARDUINO D12 + {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D5 + {PF_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO A4 {NC, NC, 0} }; @@ -193,3 +195,17 @@ const PinMap PinMap_SPI_SSEL[] = { {PG_10, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card {NC, NC, 0} }; + +//*** CAN *** + +const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, + {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, + {NC, NC, 0} +}; + +const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, + {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, + {NC, NC, 0} +}; \ No newline at end of file diff --git a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h index 31d8c73cb8..e63d9e7230 100644 --- a/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h +++ b/hal/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/objects.h @@ -101,6 +101,11 @@ struct i2c_s { uint32_t slave; }; +struct can_s { + CANName can; + int index; +}; + #include "gpio_object.h" #include "common_objects.h" diff --git a/libraries/tests/mbed/can_loopback/main.cpp b/libraries/tests/mbed/can_loopback/main.cpp index 4bc5847a59..3aea4ddcd8 100644 --- a/libraries/tests/mbed/can_loopback/main.cpp +++ b/libraries/tests/mbed/can_loopback/main.cpp @@ -21,10 +21,11 @@ CAN can1(P5_9, P5_10); defined(TARGET_NUCLEO_F746ZG) || defined(TARGET_DISCO_L476VG) || \ defined(TARGET_NUCLEO_L476RG) || defined(TARGET_NUCLEO_L432KC) CAN can1(PA_11, PA_12); -#elif defined(TARGET_DISCO_F469NI) || defined(TARGET_DISCO_F746NG) || \ - defined(TARGET_NUCLEO_F446ZE) || \ - defined(TARGET_NUCLEO_F103RB) || \ - defined(TARGET_NUCLEO_F207ZG) || defined(TARGET_NUCLEO_F303ZE) + defined(TARGET_NUCLEO_F446ZE) || \ + defined(TARGET_NUCLEO_F103RB) || \ + defined(TARGET_NUCLEO_F207ZG) || \ + defined(TARGET_NUCLEO_F303ZE) || \ + defined(TARGET_DISCO_F769NI) CAN can1(PB_8, PB_9); #endif diff --git a/tools/tests.py b/tools/tests.py index 0fdd563acd..2033dd53a0 100644 --- a/tools/tests.py +++ b/tools/tests.py @@ -325,7 +325,8 @@ TESTS = [ "NUCLEO_F091RC", "NUCLEO_F072RB", "NUCLEO_F042K6", "NUCLEO_F334R8", "NUCLEO_F207ZG", "NUCLEO_F303RE", "NUCLEO_F303K8", "NUCLEO_F302R8", "NUCLEO_F446RE","NUCLEO_F446ZE", "DISCO_F469NI", "DISCO_F429ZI", "NUCLEO_F103RB", "NUCLEO_F746ZG", - "DISCO_F746NG", "DISCO_L476VG", "NUCLEO_L476RG", "NUCLEO_L432KC"] + "DISCO_F746NG", "DISCO_L476VG", "NUCLEO_L476RG", "NUCLEO_L432KC", + "DISCO_F769NI"] }, { "id": "MBED_A28", "description": "CAN loopback test", @@ -337,7 +338,8 @@ TESTS = [ "NUCLEO_F091RC", "NUCLEO_F072RB", "NUCLEO_F042K6", "NUCLEO_F334R8", "NUCLEO_F207ZG", "NUCLEO_F303RE", "NUCLEO_F303K8", "NUCLEO_F302R8", "NUCLEO_F303ZE", "NUCLEO_F446RE","NUCLEO_F446ZE", "DISCO_F469NI", "DISCO_F429ZI", "NUCLEO_F103RB", "NUCLEO_F746ZG", - "DISCO_F746NG", "DISCO_L476VG", "NUCLEO_L476RG", "NUCLEO_L432KC"] + "DISCO_F746NG", "DISCO_L476VG", "NUCLEO_L476RG", "NUCLEO_L432KC", + "DISCO_F769NI"] }, { "id": "MBED_BLINKY", "description": "Blinky", From 765aeb0dc6c67c798358ca4c5b465d1f7f1ef6c4 Mon Sep 17 00:00:00 2001 From: Olaf Hagendorf Date: Thu, 8 Sep 2016 09:15:07 +0200 Subject: [PATCH 7/7] disco_f769ni adding ethernet init the IPV4 feature was already enabled in an earlier commit but the mbed 5 ethernet initialisation was missing --- .../TARGET_DISCO_F769NI/stm32f7_eth_init.c | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 features/net/FEATURE_IPV4/lwip-interface/lwip-eth/arch/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7_eth_init.c diff --git a/features/net/FEATURE_IPV4/lwip-interface/lwip-eth/arch/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7_eth_init.c b/features/net/FEATURE_IPV4/lwip-interface/lwip-eth/arch/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7_eth_init.c new file mode 100644 index 0000000000..a3fd1b54f4 --- /dev/null +++ b/features/net/FEATURE_IPV4/lwip-interface/lwip-eth/arch/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/stm32f7_eth_init.c @@ -0,0 +1,87 @@ +#include "stm32f7xx_hal.h" + +/** + * Override HAL Eth Init function + */ +void HAL_ETH_MspInit(ETH_HandleTypeDef* heth) +{ + GPIO_InitTypeDef GPIO_InitStructure; + if (heth->Instance == ETH) { + + /* Enable GPIOs clocks */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + + /** ETH GPIO Configuration + RMII_REF_CLK ----------------------> PA1 + RMII_MDIO -------------------------> PA2 + RMII_MDC --------------------------> PC1 + RMII_MII_CRS_DV -------------------> PA7 + RMII_MII_RXD0 ---------------------> PC4 + RMII_MII_RXD1 ---------------------> PC5 + RMII_MII_RXER ---------------------> PD5 + RMII_MII_TX_EN --------------------> PG11 + RMII_MII_TXD0 ---------------------> PG13 + RMII_MII_TXD1 ---------------------> PG14 + */ + /* Configure PA1, PA2 and PA7 */ + GPIO_InitStructure.Speed = GPIO_SPEED_HIGH; + GPIO_InitStructure.Mode = GPIO_MODE_AF_PP; + GPIO_InitStructure.Pull = GPIO_NOPULL; + GPIO_InitStructure.Alternate = GPIO_AF11_ETH; + GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7; + HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); + + /* Configure PC1, PC4 and PC5 */ + GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5; + HAL_GPIO_Init(GPIOC, &GPIO_InitStructure); + + /* Configure PD5 */ + GPIO_InitStructure.Pin = GPIO_PIN_5; + HAL_GPIO_Init(GPIOD, &GPIO_InitStructure); + + /* Configure PG11, PG13 and PG14 */ + GPIO_InitStructure.Pin = GPIO_PIN_11 | GPIO_PIN_13 | GPIO_PIN_14; + HAL_GPIO_Init(GPIOG, &GPIO_InitStructure); + + /* Enable the Ethernet global Interrupt */ + HAL_NVIC_SetPriority(ETH_IRQn, 0x7, 0); + HAL_NVIC_EnableIRQ(ETH_IRQn); + + /* Enable ETHERNET clock */ + __HAL_RCC_ETH_CLK_ENABLE(); + } +} + +/** + * Override HAL Eth DeInit function + */ +void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth) +{ + if (heth->Instance == ETH) { + /* Peripheral clock disable */ + __HAL_RCC_ETH_CLK_DISABLE(); + + /** ETH GPIO Configuration + RMII_REF_CLK ----------------------> PA1 + RMII_MDIO -------------------------> PA2 + RMII_MDC --------------------------> PC1 + RMII_MII_CRS_DV -------------------> PA7 + RMII_MII_RXD0 ---------------------> PC4 + RMII_MII_RXD1 ---------------------> PC5 + RMII_MII_RXER ---------------------> PD5 + RMII_MII_TX_EN --------------------> PG11 + RMII_MII_TXD0 ---------------------> PG13 + RMII_MII_TXD1 ---------------------> PG14 + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7); + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5); + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5); + HAL_GPIO_DeInit(GPIOG, GPIO_PIN_11 | GPIO_PIN_13 | GPIO_PIN_14); + + /* Disable the Ethernet global Interrupt */ + NVIC_DisableIRQ(ETH_IRQn); + } +} \ No newline at end of file