diff --git a/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11U35_Y5_MBUG/LPC11U35.ld b/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11U35_Y5_MBUG/LPC11U35.ld new file mode 100644 index 0000000000..a1a87cd4a8 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11U35_Y5_MBUG/LPC11U35.ld @@ -0,0 +1,151 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 64K + RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40 + USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text.Reset_Handler) + + /* Only vectors and code running at reset are safe to be in first 512 + bytes since RAM can be mapped into this area for RAM based interrupt + vectors. */ + . = 0x00000200; + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE (__fini_array_end = .); + + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + __bss_start__ = .; + *(.bss*) + *(COMMON) + __bss_end__ = .; + } > RAM + + .heap : + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy : + { + *(.stack) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/PinNames.h b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/PinNames.h new file mode 100644 index 0000000000..b43673f016 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/PinNames.h @@ -0,0 +1,150 @@ +/* mbed Microcontroller Library + * Copyright (c) 2013 Nordic Semiconductor + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 3 + +typedef enum { + p0 = 0, + p1 = 1, + p2 = 2, + p3 = 3, + p4 = 4, + p5 = 5, + p6 = 6, + p7 = 7, + p8 = 8, + p9 = 9, + p10 = 10, + p11 = 11, + p12 = 12, + p13 = 13, + p14 = 14, + p15 = 15, + p16 = 16, + p17 = 17, + p18 = 18, + p19 = 19, + p20 = 20, + p21 = 21, + p22 = 22, + p23 = 23, + p24 = 24, + p25 = 25, + p26 = 26, + p27 = 27, + p28 = 28, + p29 = 29, + p30 = 30, + p31 = 31, + p32 = 32, + p33 = 33, + p34 = 34, + p35 = 35, +// p31=31, + + // Not connected + NC = (int)0xFFFFFFFF, + + + P0_0 = p0, + P0_1 = p1, + P0_2 = p2, + P0_3 = p3, + P0_4 = p4, + P0_5 = p5, + P0_6 = p6, + P0_7 = p7, + + P0_8 = p8, + P0_9 = p9, + P0_10 = p10, + P0_11 = p11, + P0_12 = p12, + P0_13 = p13, + P0_14 = p14, + P0_15 = p15, + + P0_16 = p16, + P0_17 = p17, + P0_18 = p18, + P0_19 = p19, + P0_20 = p20, + P0_21 = p21, + P0_22 = p22, + P0_23 = p23, + + P0_24 = p24, + P0_25 = p25, + P0_26 = p26, + P0_27 = p27, + P0_28 = p28, + P0_29 = p29, + P0_30 = p30, + + LED = p30, + LED1 = p30, + LED2 = p0, + LED3 = p8, + LED4 = NC, + + BUTTON1 = p29, + BUTTON2 = p17, + + + RX_PIN_NUMBER = p2, + TX_PIN_NUMBER = p3, + CTS_PIN_NUMBER = p11, + RTS_PIN_NUMBER = p21, + + // mBed interface Pins + USBTX = TX_PIN_NUMBER, + USBRX = RX_PIN_NUMBER, + + SPIS_PSELMOSI = p12, + SPIS_PSELMISO = p6, + SPIS_PSELSCK = p9, + + I2C_SDA0 = p17, + I2C_SCL0 = p18, + + +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/device.h b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/device.h new file mode 100644 index 0000000000..9d5a5e2109 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/device.h @@ -0,0 +1,57 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/PinNames.h b/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/PinNames.h new file mode 100644 index 0000000000..5ba0145589 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/PinNames.h @@ -0,0 +1,140 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2014 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 5 + +typedef enum { + // LPC11U Pin Names + P0_0 = 0, + P0_1 = 1, + P0_2 = 2, + P0_3 = 3, + P0_4 = 4, + P0_5 = 5, + P0_6 = 6, + P0_7 = 7, + P0_8 = 8, + P0_9 = 9, + P0_10 = 10, + P0_11 = 11, + P0_12 = 12, + P0_13 = 13, + P0_14 = 14, + P0_15 = 15, + P0_16 = 16, + P0_17 = 17, + P0_18 = 18, + P0_19 = 19, + P0_20 = 20, + P0_21 = 21, + P0_22 = 22, + P0_23 = 23, + P0_24 = 24, + P0_25 = 25, + P0_26 = 26, + P0_27 = 27, + + P1_0 = 32, + P1_1 = 33, + P1_2 = 34, + P1_3 = 35, + P1_4 = 36, + P1_5 = 37, + P1_6 = 38, + P1_7 = 39, + P1_8 = 40, + P1_9 = 41, + P1_10 = 42, + P1_11 = 43, + P1_12 = 44, + P1_13 = 45, + P1_14 = 46, + P1_15 = 47, + P1_16 = 48, + P1_17 = 49, + P1_18 = 50, + P1_19 = 51, + P1_20 = 52, + P1_21 = 53, + P1_22 = 54, + P1_23 = 55, + P1_24 = 56, + P1_25 = 57, + P1_26 = 58, + P1_27 = 59, + P1_28 = 60, + P1_29 = 61, + + P1_31 = 63, + + // Not connected + NC = (int)0xFFFFFFFF, + + // Other mbed Pin Names + LED1 = P0_20, //Approved + LED2 = P0_9, //Approved + LED3 = P0_11, //Approved + LED4 = NC, + + UART_TX = P0_19, + UART_RX = P0_18, + + + + // Standard but not supported pins + USBTX = NC, + USBRX = NC + +} PinName; + +typedef enum { + CHANNEL0 = FLEX_INT0_IRQn, + CHANNEL1 = FLEX_INT1_IRQn, + CHANNEL2 = FLEX_INT2_IRQn, + CHANNEL3 = FLEX_INT3_IRQn, + CHANNEL4 = FLEX_INT4_IRQn, + CHANNEL5 = FLEX_INT5_IRQn, + CHANNEL6 = FLEX_INT6_IRQn, + CHANNEL7 = FLEX_INT7_IRQn +} Channel; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/device.h b/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/device.h new file mode 100644 index 0000000000..120ca9edb6 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/device.h @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif diff --git a/workspace_tools/export/uvision4_arch_ble.uvopt.tmpl b/workspace_tools/export/uvision4_arch_ble.uvopt.tmpl index 1d3b463017..3d0a50e7f5 100644 --- a/workspace_tools/export/uvision4_arch_ble.uvopt.tmpl +++ b/workspace_tools/export/uvision4_arch_ble.uvopt.tmpl @@ -155,7 +155,7 @@ 0 CMSIS_AGDI - -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC800 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) + -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC2000 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) diff --git a/workspace_tools/export/uvision4_nrf51822.uvopt.tmpl b/workspace_tools/export/uvision4_nrf51822.uvopt.tmpl index 4b4e8166e6..49371af6ab 100644 --- a/workspace_tools/export/uvision4_nrf51822.uvopt.tmpl +++ b/workspace_tools/export/uvision4_nrf51822.uvopt.tmpl @@ -155,7 +155,7 @@ 0 CMSIS_AGDI - -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC800 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) + -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC2000 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) diff --git a/workspace_tools/export/uvision4_nrf51_dk.uvopt.tmpl b/workspace_tools/export/uvision4_nrf51_dk.uvopt.tmpl index 4b4e8166e6..49371af6ab 100644 --- a/workspace_tools/export/uvision4_nrf51_dk.uvopt.tmpl +++ b/workspace_tools/export/uvision4_nrf51_dk.uvopt.tmpl @@ -155,7 +155,7 @@ 0 CMSIS_AGDI - -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC800 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) + -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC2000 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) diff --git a/workspace_tools/export/uvision4_nrf51_dongle.uvopt.tmpl b/workspace_tools/export/uvision4_nrf51_dongle.uvopt.tmpl index 4b4e8166e6..49371af6ab 100644 --- a/workspace_tools/export/uvision4_nrf51_dongle.uvopt.tmpl +++ b/workspace_tools/export/uvision4_nrf51_dongle.uvopt.tmpl @@ -155,7 +155,7 @@ 0 CMSIS_AGDI - -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC800 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) + -X"MBED CMSIS-DAP" -U107002011FE6E019E2180F91 -O718 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -FO31 -FD20000000 -FC2000 -FN1 -FF0nrf51xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm) diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py index c807b95b0b..8cfd66595a 100644 --- a/workspace_tools/targets.py +++ b/workspace_tools/targets.py @@ -136,6 +136,14 @@ class LPC11U35_501(LPCTarget): self.supported_toolchains = ["ARM", "uARM", "GCC_ARM", "GCC_CR" , "IAR"] self.default_toolchain = "uARM" +class LPC11U35_Y5_MBUG(LPCTarget): + def __init__(self): + LPCTarget.__init__(self) + self.core = "Cortex-M0" + self.extra_labels = ['NXP', 'LPC11UXX', 'MCU_LPC11U35_501'] + self.supported_toolchains = ["ARM", "uARM", "GCC_ARM", "GCC_CR" , "IAR"] + self.default_toolchain = "uARM" + class LPC11U37_501(LPCTarget): def __init__(self): LPCTarget.__init__(self) @@ -742,6 +750,12 @@ class RBLAB_BLENANO(NRF51822): self.extra_labels = ['NORDIC', 'MCU_NRF51822', 'MCU_NORDIC_16K'] self.macros = ['TARGET_NRF51822'] +class NRF51822_Y5_MBUG(NRF51822): + def __init__(self): + NRF51822.__init__(self) + self.extra_labels = ['NORDIC', 'MCU_NRF51822', 'MCU_NORDIC_16K'] + self.macros = ['TARGET_NRF51822'] + class XADOW_M0(LPCTarget): def __init__(self): LPCTarget.__init__(self) @@ -794,6 +808,7 @@ TARGETS = [ LPC11U24_301(), LPC11U35_401(), LPC11U35_501(), + LPC11U35_Y5_MBUG(), LPC11U37_501(), LPCCAPPUCCINO(),# LPC11U37_501 ARCH_GPRS(), # LPC11U37_501 @@ -859,6 +874,7 @@ TARGETS = [ HRM1017(), # nRF51822 RBLAB_NRF51822(),# nRF51822 RBLAB_BLENANO(),# nRF51822 + NRF51822_Y5_MBUG(),#nRF51822 XADOW_M0(), # nRF51822 WALLBOT_BLE(), # nRF51822