Merge branch 'master' of https://github.com/mbedmicro/mbed

libraries/mbed/api/mbed.h

@@ -16,7 +16,7 @@
 #ifndef MBED_H
 #define MBED_H
 
-#define MBED_LIBRARY_VERSION 80
+#define MBED_LIBRARY_VERSION 81
 
 #include "platform.h"
 

libraries/mbed/common/board.c

@@ -19,11 +19,11 @@
 
 WEAK void mbed_die(void);
 WEAK void mbed_die(void) {
+#ifndef NRF51_H
 	__disable_irq();	// dont allow interrupts to disturb the flash pattern
-
+#endif
 #if   (DEVICE_ERROR_RED == 1)
     gpio_t led_red; gpio_init_out(&led_red, LED_RED);
-    
 #elif (DEVICE_ERROR_PATTERN == 1)
     gpio_t led_1; gpio_init_out(&led_1, LED1);
     gpio_t led_2; gpio_init_out(&led_2, LED2);

libraries/mbed/common/gpio.c

@@ -18,8 +18,8 @@
 static inline void _gpio_init_in(gpio_t* gpio, PinName pin, PinMode mode)
 {
     gpio_init(gpio, pin);    
-    gpio_mode(gpio, mode);
     gpio_dir(gpio, PIN_INPUT);
+    gpio_mode(gpio, mode);
 }
     
 static inline void _gpio_init_out(gpio_t* gpio, PinName pin, PinMode mode, int value)

libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_NRF51822/system_nrf51822.c

@@ -44,24 +44,11 @@ void SystemCoreClockUpdate(void)
 
 void SystemInit(void)
 {     
-    NRF_NVMC->CONFIG = (NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos);
-    while (NRF_NVMC->READY == NVMC_READY_READY_Busy){
-    }
-    //write FWID (NRF_UICR->FWID is readonly)
-    *(uint32_t *)0x10001010 = 0xFFFF0049;
-
-    while (NRF_NVMC->READY == NVMC_READY_READY_Busy){
-    }
-
-    NRF_NVMC->CONFIG = (NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos);
-    while (NRF_NVMC->READY == NVMC_READY_READY_Busy){
-    }
     // Prepare the peripherals for use as indicated by the PAN 26 "System: Manual setup is required
     // to enable the use of peripherals" found at Product Anomaly document for your device found at
     // https://www.nordicsemi.com/. The side effect of executing these instructions in the devices 
     // that do not need it is that the new peripherals in the second generation devices (LPCOMP for
     // example) will not be available.
-    
     if (is_manual_peripheral_setup_needed()){
         *(uint32_t volatile *)0x40000504 = 0xC007FFDF;
         *(uint32_t volatile *)0x40006C18 = 0x00008000;

libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_NRF51822/PinNames.h

@@ -103,8 +103,8 @@ typedef enum {
     LED3    = p18,
     LED4    = p19,
     
-    BUTTON0 = p16,
+    BUTTON1 = p16,
-    BUTTON1 = p17,
+    BUTTON2 = p17,
         
     RX_PIN_NUMBER = p11,
     TX_PIN_NUMBER = p9,

libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_NRF51822/device.h

@@ -50,6 +50,8 @@
 
 #define DEVICE_STDIO_MESSAGES   0
 
+#define DEVICE_ERROR_PATTERN    1
+
 #include "objects.h"
 
 #endif

libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_NRF51822/us_ticker.c

@@ -29,6 +29,7 @@ volatile uint16_t timeStamp=0;
 extern "C" {
 #endif 
 void TIMER1_IRQHandler(void){ 
+
      if ((US_TICKER_TIMER->EVENTS_COMPARE[1] != 0) && 
        ((US_TICKER_TIMER->INTENSET & TIMER_INTENSET_COMPARE1_Msk) != 0))
     {