Serial, SerialBase, UARTSerial: Add explicit pinmap support

drivers/Serial.h

@@ -73,6 +73,16 @@ public:
      */
     Serial(PinName tx, PinName rx, const char *name = NULL, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
 
+    /** Create a Serial port, connected to the specified transmit and receive pins
+     *
+     *  @param explicit_pinmap reference to strucure which holds static pinmap.
+     *  @param name The name of the stream associated with this serial port (optional)
+     *  @param baud The baud rate of the serial port (optional, defaults to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE or 9600)
+     *
+     *  @note
+     *    Either tx or rx may be specified as NC (Not Connected) if unused
+     */
+    Serial(const serial_pinmap_t &explicit_pinmap, const char *name = NULL, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
 
     /** Create a Serial port, connected to the specified transmit and receive pins, with the specified baud
      *
@@ -85,6 +95,16 @@ public:
      */
     Serial(PinName tx, PinName rx, int baud);
 
+    /** Create a Serial port, connected to the specified transmit and receive pins, with the specified baud
+     *
+     *  @param explicit_pinmap reference to strucure which holds static pinmap.
+     *  @param baud The baud rate of the serial port
+     *
+     *  @note
+     *    Either tx or rx may be specified as NC (Not Connected) if unused
+     */
+    Serial(const serial_pinmap_t &explicit_pinmap, int baud);
+
     /* Stream gives us a FileHandle with non-functional poll()/readable()/writable. Pass through
      * the calls from the SerialBase instead for backwards compatibility. This problem is
      * part of why Stream and Serial should be deprecated.

drivers/SerialBase.h

@@ -200,6 +200,13 @@ public:
      *  @param flow2 the second flow control pin (CTS for RTSCTS)
      */
     void set_flow_control(Flow type, PinName flow1 = NC, PinName flow2 = NC);
+
+    /** Set the flow control type on the serial port
+     *
+     *  @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+     *  @param pinmap reference to strucure which holds static pinmap
+     */
+    void set_flow_control(Flow type, const serial_fc_pinmap_t &explicit_pinmap);
 #endif
 
     static void _irq_handler(uint32_t id, SerialIrq irq_type);
@@ -313,6 +320,7 @@ protected:
 #if !defined(DOXYGEN_ONLY)
 protected:
     SerialBase(PinName tx, PinName rx, int baud);
+    SerialBase(const serial_pinmap_t &explicit_pinmap, int baud);
     virtual ~SerialBase();
 
     int _base_getc();

drivers/UARTSerial.h

@@ -58,6 +58,13 @@ public:
      *  @param baud The baud rate of the serial port (optional, defaults to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
      */
     UARTSerial(PinName tx, PinName rx, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
+
+    /** Create a UARTSerial port, connected to the specified transmit and receive pins, with a particular baud rate.
+     *  @param explicit_pinmap reference to strucure which holds static pinmap
+     *  @param baud The baud rate of the serial port (optional, defaults to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
+     */
+    UARTSerial(const serial_pinmap_t &explicit_pinmap, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
+
     virtual ~UARTSerial();
 
     /** Equivalent to POSIX poll(). Derived from FileHandle.

drivers/source/Serial.cpp

@@ -24,10 +24,18 @@ Serial::Serial(PinName tx, PinName rx, const char *name, int baud) : SerialBase(
 {
 }
 
+Serial::Serial(const serial_pinmap_t &explicit_pinmap, const char *name, int baud) : SerialBase(explicit_pinmap, baud), Stream(name)
+{
+}
+
 Serial::Serial(PinName tx, PinName rx, int baud): SerialBase(tx, rx, baud), Stream(NULL)
 {
 }
 
+Serial::Serial(const serial_pinmap_t &explicit_pinmap, int baud): SerialBase(explicit_pinmap, baud), Stream(NULL)
+{
+}
+
 int Serial::_getc()
 {
     // Mutex is already held

drivers/source/SerialBase.cpp

@@ -40,6 +40,29 @@ SerialBase::SerialBase(PinName tx, PinName rx, int baud) :
     _init();
 }
 
+SerialBase::SerialBase(const serial_pinmap_t &explicit_pinmap, int baud) :
+#if DEVICE_SERIAL_ASYNCH
+    _thunk_irq(this), _tx_usage(DMA_USAGE_NEVER),
+    _rx_usage(DMA_USAGE_NEVER), _tx_callback(NULL),
+    _rx_callback(NULL), _tx_asynch_set(false),
+    _rx_asynch_set(false),
+#endif
+    _serial(),
+    _baud(baud),
+    _tx_pin(explicit_pinmap.tx_pin),
+    _rx_pin(explicit_pinmap.rx_pin)
+{
+    // No lock needed in the constructor
+
+    for (size_t i = 0; i < sizeof _irq / sizeof _irq[0]; i++) {
+        _irq[i] = NULL;
+    }
+
+    serial_init_direct(&_serial, &explicit_pinmap);
+    serial_baud(&_serial, _baud);
+    serial_irq_handler(&_serial, SerialBase::_irq_handler, (uint32_t)this);
+}
+
 void SerialBase::baud(int baudrate)
 {
     lock();
@@ -292,6 +315,14 @@ void SerialBase::set_flow_control(Flow type, PinName flow1, PinName flow2)
     }
     unlock();
 }
+
+void SerialBase::set_flow_control(Flow type, const serial_fc_pinmap_t &explicit_pinmap)
+{
+    lock();
+    FlowControl flow_type = (FlowControl)type;
+    serial_set_flow_control_direct(&_serial, flow_type, &explicit_pinmap);
+    unlock();
+}
 #endif
 
 #if DEVICE_SERIAL_ASYNCH

drivers/source/UARTSerial.cpp

@@ -36,6 +36,19 @@ UARTSerial::UARTSerial(PinName tx, PinName rx, int baud) :
     enable_rx_irq();
 }
 
+UARTSerial::UARTSerial(const serial_pinmap_t &explicit_pinmap, int baud) :
+    SerialBase(explicit_pinmap, baud),
+    _blocking(true),
+    _tx_irq_enabled(false),
+    _rx_irq_enabled(false),
+    _tx_enabled(true),
+    _rx_enabled(true),
+    _dcd_irq(NULL)
+{
+    /* Attatch IRQ routines to the serial device. */
+    enable_rx_irq();
+}
+
 UARTSerial::~UARTSerial()
 {
     delete _dcd_irq;