mirror of https://github.com/ARMmbed/mbed-os.git
STM32L5: add API L5 family files
jeromecoutant
parent
5d59c99b99
commit
bee5d44a1f
|
|
@ -0,0 +1,84 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_PERIPHERALNAMES_H
|
||||
#define MBED_PERIPHERALNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
ADC_1 = (int)ADC1_BASE,
|
||||
ADC_2 = (int)ADC2_BASE
|
||||
} ADCName;
|
||||
|
||||
typedef enum {
|
||||
DAC_1 = (int)DAC_BASE
|
||||
} DACName;
|
||||
|
||||
typedef enum {
|
||||
UART_1 = (int)USART1_BASE,
|
||||
UART_2 = (int)USART2_BASE,
|
||||
UART_3 = (int)USART3_BASE,
|
||||
UART_4 = (int)UART4_BASE,
|
||||
UART_5 = (int)UART5_BASE,
|
||||
LPUART_1 = (int)LPUART1_BASE
|
||||
} UARTName;
|
||||
|
||||
typedef enum {
|
||||
SPI_1 = (int)SPI1_BASE,
|
||||
SPI_2 = (int)SPI2_BASE,
|
||||
SPI_3 = (int)SPI3_BASE
|
||||
} SPIName;
|
||||
|
||||
typedef enum {
|
||||
I2C_1 = (int)I2C1_BASE,
|
||||
I2C_2 = (int)I2C2_BASE,
|
||||
I2C_3 = (int)I2C3_BASE,
|
||||
I2C_4 = (int)I2C4_BASE
|
||||
} I2CName;
|
||||
|
||||
typedef enum {
|
||||
PWM_1 = (int)TIM1_BASE,
|
||||
PWM_2 = (int)TIM2_BASE,
|
||||
PWM_3 = (int)TIM3_BASE,
|
||||
PWM_4 = (int)TIM4_BASE,
|
||||
PWM_5 = (int)TIM5_BASE,
|
||||
PWM_8 = (int)TIM8_BASE,
|
||||
PWM_15 = (int)TIM15_BASE,
|
||||
PWM_16 = (int)TIM16_BASE,
|
||||
PWM_17 = (int)TIM17_BASE
|
||||
} PWMName;
|
||||
|
||||
typedef enum {
|
||||
CAN_1 = (int)FDCAN1_BASE
|
||||
} CANName;
|
||||
|
||||
typedef enum {
|
||||
QSPI_1 = (int)OCTOSPI1_R_BASE
|
||||
} QSPIName;
|
||||
|
||||
typedef enum {
|
||||
USB_FS = (int)USB_BASE,
|
||||
} USBName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,207 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "mbed_assert.h"
|
||||
#include "analogin_api.h"
|
||||
|
||||
#if DEVICE_ANALOGIN
|
||||
|
||||
#include "mbed_wait_api.h"
|
||||
#include "cmsis.h"
|
||||
#include "pinmap.h"
|
||||
#include "mbed_error.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
#if STATIC_PINMAP_READY
|
||||
#define ANALOGIN_INIT_DIRECT analogin_init_direct
|
||||
void analogin_init_direct(analogin_t *obj, const PinMap *pinmap)
|
||||
#else
|
||||
#define ANALOGIN_INIT_DIRECT _analogin_init_direct
|
||||
static void _analogin_init_direct(analogin_t *obj, const PinMap *pinmap)
|
||||
#endif
|
||||
{
|
||||
uint32_t function = (uint32_t)pinmap->function;
|
||||
|
||||
// Get the peripheral name from the pin and assign it to the object
|
||||
obj->handle.Instance = (ADC_TypeDef *)pinmap->peripheral;
|
||||
|
||||
// ADC Internal Channels "pins" (Temperature, Vref, Vbat, ...)
|
||||
// are described in PinNames.h and PeripheralPins.c
|
||||
// Pin value must be between 0xF0 and 0xFF
|
||||
if ((pinmap->pin < 0xF0) || (pinmap->pin >= 0x100)) {
|
||||
// Configure GPIO
|
||||
pin_function(pinmap->pin, pinmap->function);
|
||||
pin_mode(pinmap->pin, PullNone);
|
||||
} else {
|
||||
// Internal channels
|
||||
// No GPIO configuration for internal channels
|
||||
}
|
||||
MBED_ASSERT(obj->handle.Instance != (ADC_TypeDef *)NC);
|
||||
MBED_ASSERT(function != (uint32_t)NC);
|
||||
|
||||
obj->channel = STM_PIN_CHANNEL(function);
|
||||
|
||||
// Save pin number for the read function
|
||||
obj->pin = pinmap->pin;
|
||||
|
||||
// Configure ADC object structures
|
||||
obj->handle.State = HAL_ADC_STATE_RESET;
|
||||
obj->handle.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV2; // Asynchronous clock mode, input ADC clock
|
||||
obj->handle.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
obj->handle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
obj->handle.Init.ScanConvMode = DISABLE; // Sequencer disabled (ADC conversion on only 1 channel: channel set on rank 1)
|
||||
obj->handle.Init.EOCSelection = ADC_EOC_SINGLE_CONV; // On STM32L1xx ADC, overrun detection is enabled only if EOC selection is set to each conversion (or transfer by DMA enabled, this is not the case in this example).
|
||||
obj->handle.Init.LowPowerAutoWait = DISABLE;
|
||||
obj->handle.Init.ContinuousConvMode = DISABLE; // Continuous mode disabled to have only 1 conversion at each conversion trig
|
||||
obj->handle.Init.NbrOfConversion = 1; // Parameter discarded because sequencer is disabled
|
||||
obj->handle.Init.DiscontinuousConvMode = DISABLE; // Parameter discarded because sequencer is disabled
|
||||
obj->handle.Init.NbrOfDiscConversion = 1; // Parameter discarded because sequencer is disabled
|
||||
obj->handle.Init.ExternalTrigConv = ADC_SOFTWARE_START; // Software start to trig the 1st conversion manually, without external event
|
||||
obj->handle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
obj->handle.Init.DMAContinuousRequests = DISABLE;
|
||||
obj->handle.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; // DR register is overwritten with the last conversion result in case of overrun
|
||||
obj->handle.Init.OversamplingMode = DISABLE; // No oversampling
|
||||
#if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0)
|
||||
obj->handle.Init.DFSDMConfig = 0;
|
||||
#endif
|
||||
|
||||
// Enable ADC clock
|
||||
__HAL_RCC_ADC_CLK_ENABLE();
|
||||
__HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_SYSCLK);
|
||||
|
||||
if (HAL_ADC_Init(&obj->handle) != HAL_OK) {
|
||||
error("Cannot initialize ADC\n");
|
||||
}
|
||||
|
||||
// ADC calibration is done only once
|
||||
if (!HAL_ADCEx_Calibration_GetValue(&obj->handle, ADC_SINGLE_ENDED)) {
|
||||
HAL_ADCEx_Calibration_Start(&obj->handle, ADC_SINGLE_ENDED);
|
||||
}
|
||||
}
|
||||
|
||||
void analogin_init(analogin_t *obj, PinName pin)
|
||||
{
|
||||
int peripheral;
|
||||
int function;
|
||||
|
||||
if ((pin < 0xF0) || (pin >= 0x100)) {
|
||||
peripheral = (int)pinmap_peripheral(pin, PinMap_ADC);
|
||||
function = (int)pinmap_find_function(pin, PinMap_ADC);
|
||||
} else {
|
||||
peripheral = (int)pinmap_peripheral(pin, PinMap_ADC_Internal);
|
||||
function = (int)pinmap_find_function(pin, PinMap_ADC_Internal);
|
||||
}
|
||||
|
||||
const PinMap static_pinmap = {pin, peripheral, function};
|
||||
|
||||
ANALOGIN_INIT_DIRECT(obj, &static_pinmap);
|
||||
}
|
||||
|
||||
|
||||
uint16_t adc_read(analogin_t *obj)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig = {0};
|
||||
|
||||
// Configure ADC channel
|
||||
sConfig.Rank = ADC_REGULAR_RANK_1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_47CYCLES_5; // default value (1.5 us for 80MHz clock)
|
||||
sConfig.SingleDiff = ADC_SINGLE_ENDED;
|
||||
sConfig.OffsetNumber = ADC_OFFSET_NONE;
|
||||
sConfig.Offset = 0;
|
||||
|
||||
switch (obj->channel) {
|
||||
case 0:
|
||||
sConfig.Channel = ADC_CHANNEL_VREFINT;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_247CYCLES_5; // Minimum ADC sampling time when reading the internal reference voltage is 4us
|
||||
break;
|
||||
case 1:
|
||||
sConfig.Channel = ADC_CHANNEL_1;
|
||||
break;
|
||||
case 2:
|
||||
sConfig.Channel = ADC_CHANNEL_2;
|
||||
break;
|
||||
case 3:
|
||||
sConfig.Channel = ADC_CHANNEL_3;
|
||||
break;
|
||||
case 4:
|
||||
sConfig.Channel = ADC_CHANNEL_4;
|
||||
break;
|
||||
case 5:
|
||||
sConfig.Channel = ADC_CHANNEL_5;
|
||||
break;
|
||||
case 6:
|
||||
sConfig.Channel = ADC_CHANNEL_6;
|
||||
break;
|
||||
case 7:
|
||||
sConfig.Channel = ADC_CHANNEL_7;
|
||||
break;
|
||||
case 8:
|
||||
sConfig.Channel = ADC_CHANNEL_8;
|
||||
break;
|
||||
case 9:
|
||||
sConfig.Channel = ADC_CHANNEL_9;
|
||||
break;
|
||||
case 10:
|
||||
sConfig.Channel = ADC_CHANNEL_10;
|
||||
break;
|
||||
case 11:
|
||||
sConfig.Channel = ADC_CHANNEL_11;
|
||||
break;
|
||||
case 12:
|
||||
sConfig.Channel = ADC_CHANNEL_12;
|
||||
break;
|
||||
case 13:
|
||||
sConfig.Channel = ADC_CHANNEL_13;
|
||||
break;
|
||||
case 14:
|
||||
sConfig.Channel = ADC_CHANNEL_14;
|
||||
break;
|
||||
case 15:
|
||||
sConfig.Channel = ADC_CHANNEL_15;
|
||||
break;
|
||||
case 16:
|
||||
sConfig.Channel = ADC_CHANNEL_16;
|
||||
break;
|
||||
case 17:
|
||||
sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_247CYCLES_5; // Minimum ADC sampling time when reading the temperature is 5us
|
||||
break;
|
||||
case 18:
|
||||
sConfig.Channel = ADC_CHANNEL_VBAT;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_640CYCLES_5; // Minimum ADC sampling time when reading the VBAT is 12us
|
||||
break;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
|
||||
HAL_ADC_ConfigChannel(&obj->handle, &sConfig);
|
||||
|
||||
HAL_ADC_Start(&obj->handle); // Start conversion
|
||||
|
||||
// Wait end of conversion and get value
|
||||
uint16_t adcValue = 0;
|
||||
if (HAL_ADC_PollForConversion(&obj->handle, 10) == HAL_OK) {
|
||||
adcValue = (uint16_t)HAL_ADC_GetValue(&obj->handle);
|
||||
}
|
||||
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE((&obj->handle)->Instance), LL_ADC_PATH_INTERNAL_NONE);
|
||||
return adcValue;
|
||||
}
|
||||
|
||||
const PinMap *analogin_pinmap()
|
||||
{
|
||||
return PinMap_ADC;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,136 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "mbed_assert.h"
|
||||
#include "analogout_api.h"
|
||||
|
||||
#if DEVICE_ANALOGOUT
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "pinmap.h"
|
||||
#include "mbed_error.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
// These variables are used for the "free" function
|
||||
static int channel1_used = 0;
|
||||
static int channel2_used = 0;
|
||||
|
||||
#if STATIC_PINMAP_READY
|
||||
#define ANALOGOUT_INIT_DIRECT analogout_init_direct
|
||||
void analogout_init_direct(dac_t *obj, const PinMap *pinmap)
|
||||
#else
|
||||
#define ANALOGOUT_INIT_DIRECT _analogout_init_direct
|
||||
static void _analogout_init_direct(dac_t *obj, const PinMap *pinmap)
|
||||
#endif
|
||||
{
|
||||
DAC_ChannelConfTypeDef sConfig = {0};
|
||||
|
||||
// Get the peripheral name from the pin and assign it to the object
|
||||
obj->dac = (DACName)pinmap->peripheral;
|
||||
MBED_ASSERT(obj->dac != (DACName)NC);
|
||||
|
||||
// Get the pin function and assign the used channel to the object
|
||||
uint32_t function = (uint32_t)pinmap->function;
|
||||
MBED_ASSERT(function != (uint32_t)NC);
|
||||
|
||||
switch (STM_PIN_CHANNEL(function)) {
|
||||
case 1:
|
||||
obj->channel = DAC_CHANNEL_1;
|
||||
break;
|
||||
#if defined(DAC_CHANNEL_2)
|
||||
case 2:
|
||||
obj->channel = DAC_CHANNEL_2;
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
error("Unknown DAC channel");
|
||||
break;
|
||||
}
|
||||
|
||||
// Configure GPIO
|
||||
pin_function(pinmap->pin, pinmap->function);
|
||||
pin_mode(pinmap->pin, PullNone);
|
||||
|
||||
// Save the pin for future use
|
||||
obj->pin = pinmap->pin;
|
||||
|
||||
// Enable DAC clock
|
||||
__HAL_RCC_DAC1_CLK_ENABLE();
|
||||
|
||||
// Configure DAC
|
||||
obj->handle.Instance = DAC;
|
||||
obj->handle.State = HAL_DAC_STATE_RESET;
|
||||
|
||||
if (HAL_DAC_Init(&obj->handle) != HAL_OK) {
|
||||
error("HAL_DAC_Init failed");
|
||||
}
|
||||
|
||||
sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
|
||||
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
|
||||
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
|
||||
sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE;
|
||||
sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
|
||||
|
||||
if (obj->channel == DAC_CHANNEL_1) {
|
||||
channel1_used = 1;
|
||||
} else { // channel 1 per default
|
||||
channel2_used = 1;
|
||||
}
|
||||
|
||||
if (HAL_DAC_ConfigChannel(&obj->handle, &sConfig, obj->channel) != HAL_OK) {
|
||||
error("Cannot configure DAC channel\n");
|
||||
}
|
||||
|
||||
analogout_write_u16(obj, 0);
|
||||
}
|
||||
|
||||
void analogout_init(dac_t *obj, PinName pin)
|
||||
{
|
||||
int peripheral = (int)pinmap_peripheral(pin, PinMap_DAC);
|
||||
int function = (int)pinmap_find_function(pin, PinMap_DAC);
|
||||
|
||||
const PinMap static_pinmap = {pin, peripheral, function};
|
||||
|
||||
ANALOGOUT_INIT_DIRECT(obj, &static_pinmap);
|
||||
}
|
||||
|
||||
void analogout_free(dac_t *obj)
|
||||
{
|
||||
// Reset DAC and disable clock
|
||||
if (obj->channel == DAC_CHANNEL_1) {
|
||||
channel1_used = 0;
|
||||
}
|
||||
#if defined(DAC_CHANNEL_2)
|
||||
if (obj->channel == DAC_CHANNEL_2) {
|
||||
channel2_used = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
if ((channel1_used == 0) && (channel2_used == 0)) {
|
||||
__HAL_RCC_DAC1_FORCE_RESET();
|
||||
__HAL_RCC_DAC1_RELEASE_RESET();
|
||||
__HAL_RCC_DAC1_CLK_DISABLE();
|
||||
}
|
||||
|
||||
// Configure GPIO
|
||||
pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
|
||||
}
|
||||
|
||||
const PinMap *analogout_pinmap()
|
||||
{
|
||||
return PinMap_DAC;
|
||||
}
|
||||
|
||||
#endif // DEVICE_ANALOGOUT
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_CAN_DEVICE_H
|
||||
#define MBED_CAN_DEVICE_H
|
||||
|
||||
#include "cmsis.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if DEVICE_CAN
|
||||
|
||||
#define CAN_NUM 1 // Number of CAN peripherals present in the STM32 serie
|
||||
|
||||
#define CAN1_IRQ_RX_IRQN CAN1_RX0_IRQn
|
||||
#define CAN1_IRQ_RX_VECT CAN1_RX0_IRQHandler
|
||||
#define CAN1_IRQ_TX_IRQN CAN1_TX_IRQn
|
||||
#define CAN1_IRQ_TX_VECT CAN1_TX_IRQHandler
|
||||
#define CAN1_IRQ_ERROR_IRQN CAN1_SCE_IRQn
|
||||
#define CAN1_IRQ_ERROR_VECT CAN1_SCE_IRQHandler
|
||||
#define CAN1_IRQ_PASSIVE_IRQN CAN1_SCE_IRQn
|
||||
#define CAN1_IRQ_PASSIVE_VECT CAN1_SCE_IRQHandler
|
||||
#define CAN1_IRQ_BUS_IRQN CAN1_SCE_IRQn
|
||||
#define CAN1_IRQ_BUS_VECT CAN1_SCE_IRQHandler
|
||||
|
||||
#endif // DEVICE_CAN
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_CMSIS_H
|
||||
#define MBED_CMSIS_H
|
||||
|
||||
#include "stm32l5xx.h"
|
||||
#include "cmsis_nvic.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,299 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "flash_api.h"
|
||||
|
||||
#if DEVICE_FLASH
|
||||
|
||||
|
||||
/**
|
||||
* @brief Gets the page of a given address
|
||||
* @param Addr: Address of the FLASH Memory
|
||||
* @retval The page of a given address
|
||||
*/
|
||||
static uint32_t GetPage(uint32_t Addr)
|
||||
{
|
||||
uint32_t page = 0;
|
||||
|
||||
if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) {
|
||||
if (Addr < (FLASH_BASE + FLASH_BANK_SIZE)) {
|
||||
/* Bank 1 */
|
||||
page = (Addr - FLASH_BASE) / FLASH_PAGE_SIZE;
|
||||
} else {
|
||||
/* Bank 2 */
|
||||
page = (Addr - (FLASH_BASE + FLASH_BANK_SIZE)) / FLASH_PAGE_SIZE;
|
||||
}
|
||||
} else {
|
||||
page = (Addr - FLASH_BASE) / FLASH_PAGE_SIZE_128_BITS;
|
||||
}
|
||||
|
||||
return page;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Gets the bank of a given address
|
||||
* @param Addr: Address of the FLASH Memory
|
||||
* @retval The bank of a given address
|
||||
*/
|
||||
static uint32_t GetBank(uint32_t Addr)
|
||||
{
|
||||
uint32_t bank = 0;
|
||||
|
||||
if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) {
|
||||
if (Addr < (FLASH_BASE + FLASH_BANK_SIZE)) {
|
||||
bank = FLASH_BANK_1;
|
||||
} else {
|
||||
bank = FLASH_BANK_2;
|
||||
}
|
||||
} else {
|
||||
bank = FLASH_BANK_1;
|
||||
}
|
||||
|
||||
return bank;
|
||||
}
|
||||
|
||||
/** Initialize the flash peripheral and the flash_t object
|
||||
*
|
||||
* @param obj The flash object
|
||||
* @return 0 for success, -1 for error
|
||||
*/
|
||||
int32_t flash_init(flash_t *obj)
|
||||
{
|
||||
#ifdef TARGET_TFM
|
||||
/* TFM implementation needs dual bank configuration */
|
||||
if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) {
|
||||
return 0;
|
||||
} else {
|
||||
return -1;
|
||||
}
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
/** Uninitialize the flash peripheral and the flash_t object
|
||||
*
|
||||
* @param obj The flash object
|
||||
* @return 0 for success, -1 for error
|
||||
*/
|
||||
int32_t flash_free(flash_t *obj)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int32_t flash_unlock(void)
|
||||
{
|
||||
/* Allow Access to Flash control registers and user Falsh */
|
||||
if (HAL_FLASH_Unlock()) {
|
||||
return -1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static int32_t flash_lock(void)
|
||||
{
|
||||
/* Disable the Flash option control register access (recommended to protect
|
||||
the option Bytes against possible unwanted operations) */
|
||||
if (HAL_FLASH_Lock()) {
|
||||
return -1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
/** Erase one sector starting at defined address
|
||||
*
|
||||
* The address should be at sector boundary. This function does not do any check for address alignments
|
||||
* @param obj The flash object
|
||||
* @param address The sector starting address
|
||||
* @return 0 for success, -1 for error
|
||||
*/
|
||||
int32_t flash_erase_sector(flash_t *obj, uint32_t address)
|
||||
{
|
||||
uint32_t FirstPage = 0, BankNumber = 0;
|
||||
uint32_t PAGEError = 0;
|
||||
FLASH_EraseInitTypeDef EraseInitStruct;
|
||||
|
||||
if ((address >= (flash_get_start_address(obj) + flash_get_size(obj))) || (address < flash_get_start_address(obj))) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (flash_unlock() != HAL_OK) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Clear error programming flags */
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
|
||||
|
||||
/* Get the 1st page to erase */
|
||||
FirstPage = GetPage(address);
|
||||
/* MBED HAL erases 1 page / sector at a time */
|
||||
/* Get the bank */
|
||||
BankNumber = GetBank(address);
|
||||
|
||||
/* Fill EraseInit structure*/
|
||||
EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;
|
||||
EraseInitStruct.Banks = BankNumber;
|
||||
EraseInitStruct.Page = FirstPage;
|
||||
EraseInitStruct.NbPages = 1;
|
||||
|
||||
if (HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError) != HAL_OK) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (flash_lock() != HAL_OK) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/** Program one page starting at defined address
|
||||
*
|
||||
* The page should be at page boundary, should not cross multiple sectors.
|
||||
* This function does not do any check for address alignments or if size
|
||||
* is aligned to a page size.
|
||||
* @param obj The flash object
|
||||
* @param address The sector starting address
|
||||
* @param data The data buffer to be programmed
|
||||
* @param size The number of bytes to program
|
||||
* @return 0 for success, -1 for error
|
||||
*/
|
||||
int32_t flash_program_page(flash_t *obj, uint32_t address,
|
||||
const uint8_t *data, uint32_t size)
|
||||
{
|
||||
uint32_t StartAddress = 0;
|
||||
int32_t status = 0;
|
||||
if ((address >= (flash_get_start_address(obj) + flash_get_size(obj))) || (address < flash_get_start_address(obj))) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
if ((size % 8) != 0) {
|
||||
/* L4 flash devices can only be programmed 64bits/8 bytes at a time */
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (flash_unlock() != HAL_OK) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Clear error programming flags */
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
|
||||
|
||||
/* Program the user Flash area word by word */
|
||||
StartAddress = address;
|
||||
|
||||
/* HW needs an aligned address to program flash, which data
|
||||
* parameters doesn't ensure */
|
||||
if ((uint32_t) data % 4 != 0) {
|
||||
volatile uint64_t data64;
|
||||
while ((address < (StartAddress + size)) && (status == 0)) {
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
*(((uint8_t *) &data64) + i) = *(data + i);
|
||||
}
|
||||
|
||||
if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, address, data64)
|
||||
== HAL_OK) {
|
||||
address = address + 8;
|
||||
data = data + 8;
|
||||
} else {
|
||||
status = -1;
|
||||
}
|
||||
}
|
||||
} else { /* case where data is aligned, so let's avoid any copy */
|
||||
while ((address < (StartAddress + size)) && (status == 0)) {
|
||||
if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, address,
|
||||
*((uint64_t *) data))
|
||||
== HAL_OK) {
|
||||
address = address + 8;
|
||||
data = data + 8;
|
||||
} else {
|
||||
status = -1;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
status = flash_unlock();
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/** Get sector size
|
||||
*
|
||||
* @param obj The flash object
|
||||
* @param address The sector starting address
|
||||
* @return The size of a sector
|
||||
*/
|
||||
uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address)
|
||||
{
|
||||
if ((address >= (flash_get_start_address(obj) + flash_get_size(obj))) || (address < flash_get_start_address(obj))) {
|
||||
return MBED_FLASH_INVALID_SIZE;
|
||||
} else {
|
||||
if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) {
|
||||
return FLASH_PAGE_SIZE;
|
||||
} else {
|
||||
return FLASH_PAGE_SIZE_128_BITS;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/** Get page size
|
||||
*
|
||||
* @param obj The flash object
|
||||
* @return The size of a page
|
||||
*/
|
||||
uint32_t flash_get_page_size(const flash_t *obj)
|
||||
{
|
||||
/* Page size is the minimum programable size, which 8 bytes */
|
||||
return 8;
|
||||
}
|
||||
|
||||
/** Get start address for the flash region
|
||||
*
|
||||
* @param obj The flash object
|
||||
* @return The start address for the flash region
|
||||
*/
|
||||
uint32_t flash_get_start_address(const flash_t *obj)
|
||||
{
|
||||
#if (DOMAIN_NS == 1)
|
||||
return NS_CODE_START;
|
||||
#else
|
||||
return FLASH_BASE;
|
||||
#endif
|
||||
}
|
||||
|
||||
/** Get the flash region size
|
||||
*
|
||||
* @param obj The flash object
|
||||
* @return The flash region size
|
||||
*/
|
||||
uint32_t flash_get_size(const flash_t *obj)
|
||||
{
|
||||
#if (DOMAIN_NS == 1)
|
||||
return NS_CODE_SIZE;
|
||||
#else
|
||||
return FLASH_SIZE;
|
||||
#endif
|
||||
}
|
||||
|
||||
uint8_t flash_get_erase_value(const flash_t *obj)
|
||||
{
|
||||
(void)obj;
|
||||
|
||||
return 0xFF;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "gpio_irq_device.h"
|
||||
|
||||
// Used to return the index for channels array.
|
||||
const exti_lines_t pin_lines_desc[16] = {
|
||||
// EXTI0
|
||||
{.gpio_idx = 0, .irq_index = 0, .irq_n = EXTI0_IRQn}, // pin 0
|
||||
// EXTI1
|
||||
{.gpio_idx = 0, .irq_index = 1, .irq_n = EXTI1_IRQn}, // pin 1
|
||||
// EXTI2
|
||||
{.gpio_idx = 0, .irq_index = 2, .irq_n = EXTI2_IRQn}, // pin 2
|
||||
// EXTI3
|
||||
{.gpio_idx = 0, .irq_index = 3, .irq_n = EXTI3_IRQn}, // pin 3
|
||||
// EXTI4
|
||||
{.gpio_idx = 0, .irq_index = 4, .irq_n = EXTI4_IRQn}, // pin 4
|
||||
// EXTI5
|
||||
{.gpio_idx = 0, .irq_index = 5, .irq_n = EXTI5_IRQn}, // pin 5
|
||||
// EXTI6
|
||||
{.gpio_idx = 0, .irq_index = 6, .irq_n = EXTI6_IRQn}, // pin 6
|
||||
// EXTI7
|
||||
{.gpio_idx = 0, .irq_index = 7, .irq_n = EXTI7_IRQn}, // pin 7
|
||||
// EXTI8
|
||||
{.gpio_idx = 0, .irq_index = 8, .irq_n = EXTI8_IRQn}, // pin 8
|
||||
// EXTI9
|
||||
{.gpio_idx = 0, .irq_index = 9, .irq_n = EXTI9_IRQn}, // pin 9
|
||||
// EXTI10
|
||||
{.gpio_idx = 0, .irq_index = 10, .irq_n = EXTI10_IRQn}, // pin 10
|
||||
// EXTI11
|
||||
{.gpio_idx = 0, .irq_index = 11, .irq_n = EXTI11_IRQn}, // pin 11
|
||||
// EXTI12
|
||||
{.gpio_idx = 0, .irq_index = 12, .irq_n = EXTI12_IRQn}, // pin 12
|
||||
// EXTI13
|
||||
{.gpio_idx = 0, .irq_index = 13, .irq_n = EXTI13_IRQn}, // pin 13
|
||||
// EXTI14
|
||||
{.gpio_idx = 0, .irq_index = 14, .irq_n = EXTI14_IRQn}, // pin 14
|
||||
// EXTI15
|
||||
{.gpio_idx = 0, .irq_index = 15, .irq_n = EXTI15_IRQn}, // pin 15
|
||||
};
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_GPIO_IRQ_DEVICE_H
|
||||
#define MBED_GPIO_IRQ_DEVICE_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stm32l5xx_ll_exti.h"
|
||||
|
||||
// Number of EXTI irq vectors (EXTI0 to EXTI15)
|
||||
#define CHANNEL_NUM (16)
|
||||
|
||||
#define EXTI_IRQ0_NUM_LINES 1
|
||||
#define EXTI_IRQ1_NUM_LINES 1
|
||||
#define EXTI_IRQ2_NUM_LINES 1
|
||||
#define EXTI_IRQ3_NUM_LINES 1
|
||||
#define EXTI_IRQ4_NUM_LINES 1
|
||||
#define EXTI_IRQ5_NUM_LINES 1
|
||||
#define EXTI_IRQ6_NUM_LINES 1
|
||||
#define EXTI_IRQ7_NUM_LINES 1
|
||||
#define EXTI_IRQ8_NUM_LINES 1
|
||||
#define EXTI_IRQ9_NUM_LINES 1
|
||||
#define EXTI_IRQ10_NUM_LINES 1
|
||||
#define EXTI_IRQ11_NUM_LINES 1
|
||||
#define EXTI_IRQ12_NUM_LINES 1
|
||||
#define EXTI_IRQ13_NUM_LINES 1
|
||||
#define EXTI_IRQ14_NUM_LINES 1
|
||||
#define EXTI_IRQ15_NUM_LINES 1
|
||||
|
||||
// Max pins for one line
|
||||
#define MAX_PIN_LINE (1)
|
||||
|
||||
/* Structure to describe how the HW EXTI lines are defined in this HW */
|
||||
typedef struct exti_lines {
|
||||
uint32_t gpio_idx; // an index entry for each EXIT line
|
||||
uint32_t irq_index; // the IRQ index
|
||||
IRQn_Type irq_n; // the corresponding EXTI IRQn
|
||||
} exti_lines_t;
|
||||
|
||||
// Used to return the index for channels array.
|
||||
extern const exti_lines_t pin_lines_desc[];
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,70 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_I2C_DEVICE_H
|
||||
#define MBED_I2C_DEVICE_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "mbed_error.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if DEVICE_I2C
|
||||
|
||||
#define I2C_IP_VERSION_V2
|
||||
|
||||
#define I2C_IT_ALL (I2C_IT_ERRI|I2C_IT_TCI|I2C_IT_STOPI|I2C_IT_NACKI|I2C_IT_ADDRI|I2C_IT_RXI|I2C_IT_TXI)
|
||||
|
||||
/* Family specifc settings for clock source */
|
||||
#define I2CAPI_I2C1_CLKSRC RCC_I2C1CLKSOURCE_SYSCLK
|
||||
#define I2CAPI_I2C2_CLKSRC RCC_I2C2CLKSOURCE_SYSCLK
|
||||
#define I2CAPI_I2C3_CLKSRC RCC_I2C3CLKSOURCE_SYSCLK
|
||||
#define I2CAPI_I2C4_CLKSRC RCC_I2C4CLKSOURCE_SYSCLK
|
||||
|
||||
/* Provide the suitable timing depending on requested frequencie */
|
||||
static inline uint32_t get_i2c_timing(int hz)
|
||||
{
|
||||
uint32_t tim = 0;
|
||||
if (SystemCoreClock == 110000000) {
|
||||
// Common settings: I2C clock = 80 MHz, Analog filter = ON, Digital filter coefficient = 0
|
||||
switch (hz) {
|
||||
case 100000:
|
||||
tim = 0x40E15676; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
|
||||
break;
|
||||
case 400000:
|
||||
tim = 0x20C11434; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
|
||||
break;
|
||||
case 1000000:
|
||||
tim = 0x00C31536; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
else {
|
||||
error("Value not provided for SystemCoreClock %u\n", SystemCoreClock);
|
||||
}
|
||||
return tim;
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // DEVICE_I2C
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_OBJECTS_H
|
||||
#define MBED_OBJECTS_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "PortNames.h"
|
||||
#include "PeripheralNames.h"
|
||||
#include "PinNames.h"
|
||||
#include "stm32l5xx_ll_usart.h"
|
||||
#include "stm32l5xx_ll_lpuart.h"
|
||||
#include "stm32l5xx_ll_tim.h"
|
||||
#include "stm32l5xx_ll_rtc.h"
|
||||
#include "stm32l5xx_ll_pwr.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define RTC_WKUP_IRQn RTC_IRQn
|
||||
|
||||
#define HAL_CRC_IS_SUPPORTED(polynomial, width) ((width) == 7 || (width) == 8 || (width) == 16 || (width) == 32)
|
||||
|
||||
struct gpio_irq_s {
|
||||
IRQn_Type irq_n;
|
||||
uint32_t irq_index;
|
||||
uint32_t event;
|
||||
PinName pin;
|
||||
};
|
||||
|
||||
struct port_s {
|
||||
PortName port;
|
||||
uint32_t mask;
|
||||
PinDirection direction;
|
||||
__IO uint32_t *reg_in;
|
||||
__IO uint32_t *reg_out;
|
||||
};
|
||||
|
||||
struct trng_s {
|
||||
RNG_HandleTypeDef handle;
|
||||
};
|
||||
|
||||
struct pwmout_s {
|
||||
PWMName pwm;
|
||||
PinName pin;
|
||||
uint32_t prescaler;
|
||||
uint32_t period;
|
||||
uint32_t pulse;
|
||||
uint8_t channel;
|
||||
uint8_t inverted;
|
||||
};
|
||||
|
||||
struct spi_s {
|
||||
SPI_HandleTypeDef handle;
|
||||
IRQn_Type spiIRQ;
|
||||
SPIName spi;
|
||||
PinName pin_miso;
|
||||
PinName pin_mosi;
|
||||
PinName pin_sclk;
|
||||
PinName pin_ssel;
|
||||
#if DEVICE_SPI_ASYNCH
|
||||
uint32_t event;
|
||||
uint8_t transfer_type;
|
||||
#endif
|
||||
};
|
||||
|
||||
struct serial_s {
|
||||
UARTName uart;
|
||||
int index; // Used by irq
|
||||
uint32_t baudrate;
|
||||
uint32_t databits;
|
||||
uint32_t stopbits;
|
||||
uint32_t parity;
|
||||
PinName pin_tx;
|
||||
PinName pin_rx;
|
||||
#if DEVICE_SERIAL_ASYNCH
|
||||
uint32_t events;
|
||||
#endif
|
||||
#if DEVICE_SERIAL_FC
|
||||
uint32_t hw_flow_ctl;
|
||||
PinName pin_rts;
|
||||
PinName pin_cts;
|
||||
#endif
|
||||
};
|
||||
|
||||
struct i2c_s {
|
||||
/* The 1st 2 members I2CName i2c
|
||||
* and I2C_HandleTypeDef handle should
|
||||
* be kept as the first members of this struct
|
||||
* to ensure i2c_get_obj to work as expected
|
||||
*/
|
||||
I2CName i2c;
|
||||
I2C_HandleTypeDef handle;
|
||||
uint8_t index;
|
||||
int hz;
|
||||
PinName sda;
|
||||
PinName scl;
|
||||
IRQn_Type event_i2cIRQ;
|
||||
IRQn_Type error_i2cIRQ;
|
||||
uint32_t XferOperation;
|
||||
volatile uint8_t event;
|
||||
volatile int pending_start;
|
||||
#if DEVICE_I2CSLAVE
|
||||
uint8_t slave;
|
||||
volatile uint8_t pending_slave_tx_master_rx;
|
||||
volatile uint8_t pending_slave_rx_maxter_tx;
|
||||
#endif
|
||||
#if DEVICE_I2C_ASYNCH
|
||||
uint32_t address;
|
||||
uint8_t stop;
|
||||
uint8_t available_events;
|
||||
#endif
|
||||
};
|
||||
|
||||
struct flash_s {
|
||||
/* nothing to be stored for now */
|
||||
uint32_t dummy;
|
||||
};
|
||||
|
||||
struct analogin_s {
|
||||
ADC_HandleTypeDef handle;
|
||||
PinName pin;
|
||||
uint8_t channel;
|
||||
};
|
||||
|
||||
#include "gpio_object.h"
|
||||
|
||||
#if DEVICE_ANALOGOUT
|
||||
struct dac_s {
|
||||
DACName dac;
|
||||
PinName pin;
|
||||
uint32_t channel;
|
||||
DAC_HandleTypeDef handle;
|
||||
};
|
||||
#endif
|
||||
|
||||
#if DEVICE_CAN
|
||||
struct can_s {
|
||||
CAN_HandleTypeDef CanHandle;
|
||||
int index;
|
||||
int hz;
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_PIN_DEVICE_H
|
||||
#define MBED_PIN_DEVICE_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "stm32l5xx_ll_gpio.h"
|
||||
|
||||
extern const uint32_t ll_pin_defines[16];
|
||||
|
||||
/* Family specific implementations */
|
||||
static inline void stm_pin_DisconnectDebug(PinName pin)
|
||||
{
|
||||
/* empty for now */
|
||||
}
|
||||
|
||||
static inline void stm_pin_PullConfig(GPIO_TypeDef *gpio, uint32_t ll_pin, uint32_t pull_config)
|
||||
{
|
||||
switch (pull_config) {
|
||||
case GPIO_PULLUP:
|
||||
LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_UP);
|
||||
break;
|
||||
case GPIO_PULLDOWN:
|
||||
LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_DOWN);
|
||||
break;
|
||||
default:
|
||||
LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_NO);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void stm_pin_SetAFPin(GPIO_TypeDef *gpio, PinName pin, uint32_t afnum)
|
||||
{
|
||||
uint32_t ll_pin = ll_pin_defines[STM_PIN(pin)];
|
||||
|
||||
if (STM_PIN(pin) > 7) {
|
||||
LL_GPIO_SetAFPin_8_15(gpio, ll_pin, afnum);
|
||||
} else {
|
||||
LL_GPIO_SetAFPin_0_7(gpio, ll_pin, afnum);
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "pwmout_api.h"
|
||||
#include "pwmout_device.h"
|
||||
|
||||
#if DEVICE_PWMOUT
|
||||
|
||||
const pwm_apb_map_t pwm_apb_map_table[] = {
|
||||
#if defined(TIM2_BASE)
|
||||
{PWM_2, PWMOUT_ON_APB1},
|
||||
#endif
|
||||
#if defined(TIM3_BASE)
|
||||
{PWM_3, PWMOUT_ON_APB1},
|
||||
#endif
|
||||
#if defined(TIM4_BASE)
|
||||
{PWM_4, PWMOUT_ON_APB1},
|
||||
#endif
|
||||
#if defined(TIM5_BASE)
|
||||
{PWM_5, PWMOUT_ON_APB1},
|
||||
#endif
|
||||
#if defined(TIM1_BASE)
|
||||
{PWM_1, PWMOUT_ON_APB2},
|
||||
#endif
|
||||
#if defined(TIM8_BASE)
|
||||
{PWM_8, PWMOUT_ON_APB2},
|
||||
#endif
|
||||
#if defined(TIM15_BASE)
|
||||
{PWM_15, PWMOUT_ON_APB2},
|
||||
#endif
|
||||
#if defined(TIM16_BASE)
|
||||
{PWM_16, PWMOUT_ON_APB2},
|
||||
#endif
|
||||
#if defined(TIM17_BASE)
|
||||
{PWM_17, PWMOUT_ON_APB2},
|
||||
#endif
|
||||
{(PWMName) 0, PWMOUT_UNKNOWN}
|
||||
};
|
||||
|
||||
#endif // DEVICE_PWMOUT
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_PWMOUT_DEVICE_H
|
||||
#define MBED_PWMOUT_DEVICE_H
|
||||
|
||||
#include "cmsis.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if DEVICE_PWMOUT
|
||||
|
||||
typedef enum {
|
||||
PWMOUT_ON_APB1 = 0,
|
||||
PWMOUT_ON_APB2 = 1,
|
||||
PWMOUT_UNKNOWN = 2
|
||||
} PwmoutApb;
|
||||
|
||||
/* Structure to describe Timers to APB */
|
||||
typedef struct pwm_apb_map {
|
||||
PWMName pwm; // an index entry for each EXIT line
|
||||
PwmoutApb pwmoutApb;
|
||||
} pwm_apb_map_t;
|
||||
|
||||
extern const pwm_apb_map_t pwm_apb_map_table[];
|
||||
|
||||
#endif // DEVICE_PWMOUT
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,722 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#if DEVICE_SERIAL
|
||||
|
||||
#include "serial_api_hal.h"
|
||||
|
||||
#define UART_NUM (6) // USART1, USART2, USART3, UART4, UART5, LPUART1
|
||||
|
||||
uint32_t serial_irq_ids[UART_NUM] = {0};
|
||||
UART_HandleTypeDef uart_handlers[UART_NUM];
|
||||
|
||||
static uart_irq_handler irq_handler;
|
||||
|
||||
// Defined in serial_api.c
|
||||
extern int8_t get_uart_index(UARTName uart_name);
|
||||
|
||||
/******************************************************************************
|
||||
* INTERRUPTS HANDLING
|
||||
******************************************************************************/
|
||||
|
||||
static void uart_irq(UARTName uart_name)
|
||||
{
|
||||
int8_t id = get_uart_index(uart_name);
|
||||
|
||||
if (id >= 0) {
|
||||
UART_HandleTypeDef *huart = &uart_handlers[id];
|
||||
if (serial_irq_ids[id] != 0) {
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TXE) != RESET) {
|
||||
if (__HAL_UART_GET_IT(huart, UART_IT_TXE) != RESET && __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE)) {
|
||||
irq_handler(serial_irq_ids[id], TxIrq);
|
||||
}
|
||||
}
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE) != RESET) {
|
||||
if (__HAL_UART_GET_IT(huart, UART_IT_RXNE) != RESET && __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE)) {
|
||||
irq_handler(serial_irq_ids[id], RxIrq);
|
||||
/* Flag has been cleared when reading the content */
|
||||
}
|
||||
}
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
|
||||
if (__HAL_UART_GET_IT(huart, UART_IT_ORE) != RESET) {
|
||||
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#if defined(USART1_BASE)
|
||||
static void uart1_irq(void)
|
||||
{
|
||||
uart_irq(UART_1);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(USART2_BASE)
|
||||
static void uart2_irq(void)
|
||||
{
|
||||
uart_irq(UART_2);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(USART3_BASE)
|
||||
static void uart3_irq(void)
|
||||
{
|
||||
uart_irq(UART_3);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(UART4_BASE)
|
||||
static void uart4_irq(void)
|
||||
{
|
||||
uart_irq(UART_4);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(UART5_BASE)
|
||||
static void uart5_irq(void)
|
||||
{
|
||||
uart_irq(UART_5);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(LPUART1_BASE)
|
||||
static void lpuart1_irq(void)
|
||||
{
|
||||
uart_irq(LPUART_1);
|
||||
}
|
||||
#endif
|
||||
|
||||
void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
|
||||
irq_handler = handler;
|
||||
serial_irq_ids[obj_s->index] = id;
|
||||
}
|
||||
|
||||
void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
IRQn_Type irq_n = (IRQn_Type)0;
|
||||
uint32_t vector = 0;
|
||||
|
||||
switch (obj_s->uart) {
|
||||
#if defined(USART1_BASE)
|
||||
case UART_1:
|
||||
irq_n = USART1_IRQn;
|
||||
vector = (uint32_t)&uart1_irq;
|
||||
break;
|
||||
#endif
|
||||
#if defined(USART2_BASE)
|
||||
case UART_2:
|
||||
irq_n = USART2_IRQn;
|
||||
vector = (uint32_t)&uart2_irq;
|
||||
break;
|
||||
#endif
|
||||
#if defined(USART3_BASE)
|
||||
case UART_3:
|
||||
irq_n = USART3_IRQn;
|
||||
vector = (uint32_t)&uart3_irq;
|
||||
break;
|
||||
#endif
|
||||
#if defined(UART4_BASE)
|
||||
case UART_4:
|
||||
irq_n = UART4_IRQn;
|
||||
vector = (uint32_t)&uart4_irq;
|
||||
break;
|
||||
#endif
|
||||
#if defined(UART5_BASE)
|
||||
case UART_5:
|
||||
irq_n = UART5_IRQn;
|
||||
vector = (uint32_t)&uart5_irq;
|
||||
break;
|
||||
#endif
|
||||
#if defined(LPUART1_BASE)
|
||||
case LPUART_1:
|
||||
irq_n = LPUART1_IRQn;
|
||||
vector = (uint32_t)&lpuart1_irq;
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
|
||||
if (enable) {
|
||||
if (irq == RxIrq) {
|
||||
__HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
|
||||
} else { // TxIrq
|
||||
__HAL_UART_ENABLE_IT(huart, UART_IT_TXE);
|
||||
}
|
||||
NVIC_SetVector(irq_n, vector);
|
||||
NVIC_EnableIRQ(irq_n);
|
||||
|
||||
} else { // disable
|
||||
int all_disabled = 0;
|
||||
if (irq == RxIrq) {
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
|
||||
// Check if TxIrq is disabled too
|
||||
if (LL_LPUART_IsEnabledIT_TXE(huart->Instance) == 0) {
|
||||
all_disabled = 1;
|
||||
}
|
||||
} else { // TxIrq
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
|
||||
// Check if RxIrq is disabled too
|
||||
if (LL_LPUART_IsEnabledIT_RXNE(huart->Instance) == 0) {
|
||||
all_disabled = 1;
|
||||
}
|
||||
}
|
||||
|
||||
if (all_disabled) {
|
||||
NVIC_DisableIRQ(irq_n);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* READ/WRITE
|
||||
******************************************************************************/
|
||||
|
||||
int serial_getc(serial_t *obj)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
while (!serial_readable(obj));
|
||||
if (obj_s->databits == UART_WORDLENGTH_8B) {
|
||||
return (int)(huart->Instance->RDR & (uint8_t)0xFF);
|
||||
} else {
|
||||
return (int)(huart->Instance->RDR & (uint16_t)0x1FF);
|
||||
}
|
||||
}
|
||||
|
||||
void serial_putc(serial_t *obj, int c)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
while (!serial_writable(obj));
|
||||
if (obj_s->databits == UART_WORDLENGTH_8B) {
|
||||
huart->Instance->TDR = (uint8_t)(c & (uint8_t)0xFF);
|
||||
} else {
|
||||
huart->Instance->TDR = (uint16_t)(c & (uint16_t)0x1FF);
|
||||
}
|
||||
}
|
||||
|
||||
void serial_clear(serial_t *obj)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
/* Clear RXNE and error flags */
|
||||
volatile uint32_t tmpval __attribute__((unused)) = huart->Instance->RDR;
|
||||
HAL_UART_ErrorCallback(huart);
|
||||
}
|
||||
|
||||
void serial_break_set(serial_t *obj)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
HAL_LIN_SendBreak(huart);
|
||||
}
|
||||
|
||||
#if DEVICE_SERIAL_ASYNCH
|
||||
|
||||
/******************************************************************************
|
||||
* LOCAL HELPER FUNCTIONS
|
||||
******************************************************************************/
|
||||
|
||||
/**
|
||||
* Configure the TX buffer for an asynchronous write serial transaction
|
||||
*
|
||||
* @param obj The serial object.
|
||||
* @param tx The buffer for sending.
|
||||
* @param tx_length The number of words to transmit.
|
||||
*/
|
||||
static void serial_tx_buffer_set(serial_t *obj, void *tx, int tx_length, uint8_t width)
|
||||
{
|
||||
(void)width;
|
||||
|
||||
// Exit if a transmit is already on-going
|
||||
if (serial_tx_active(obj)) {
|
||||
return;
|
||||
}
|
||||
|
||||
obj->tx_buff.buffer = tx;
|
||||
obj->tx_buff.length = tx_length;
|
||||
obj->tx_buff.pos = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Configure the RX buffer for an asynchronous write serial transaction
|
||||
*
|
||||
* @param obj The serial object.
|
||||
* @param tx The buffer for sending.
|
||||
* @param tx_length The number of words to transmit.
|
||||
*/
|
||||
static void serial_rx_buffer_set(serial_t *obj, void *rx, int rx_length, uint8_t width)
|
||||
{
|
||||
(void)width;
|
||||
|
||||
// Exit if a reception is already on-going
|
||||
if (serial_rx_active(obj)) {
|
||||
return;
|
||||
}
|
||||
|
||||
obj->rx_buff.buffer = rx;
|
||||
obj->rx_buff.length = rx_length;
|
||||
obj->rx_buff.pos = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Configure events
|
||||
*
|
||||
* @param obj The serial object
|
||||
* @param event The logical OR of the events to configure
|
||||
* @param enable Set to non-zero to enable events, or zero to disable them
|
||||
*/
|
||||
static void serial_enable_event(serial_t *obj, int event, uint8_t enable)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
|
||||
// Shouldn't have to enable interrupt here, just need to keep track of the requested events.
|
||||
if (enable) {
|
||||
obj_s->events |= event;
|
||||
} else {
|
||||
obj_s->events &= ~event;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Get index of serial object TX IRQ, relating it to the physical peripheral.
|
||||
*
|
||||
* @param uart_name i.e. UART_1, UART_2, ...
|
||||
* @return internal NVIC TX IRQ index of U(S)ART peripheral
|
||||
*/
|
||||
static IRQn_Type serial_get_irq_n(UARTName uart_name)
|
||||
{
|
||||
IRQn_Type irq_n;
|
||||
|
||||
switch (uart_name) {
|
||||
#if defined(USART1_BASE)
|
||||
case UART_1:
|
||||
irq_n = USART1_IRQn;
|
||||
break;
|
||||
#endif
|
||||
#if defined(USART2_BASE)
|
||||
case UART_2:
|
||||
irq_n = USART2_IRQn;
|
||||
break;
|
||||
#endif
|
||||
#if defined(USART3_BASE)
|
||||
case UART_3:
|
||||
irq_n = USART3_IRQn;
|
||||
break;
|
||||
#endif
|
||||
#if defined(UART4_BASE)
|
||||
case UART_4:
|
||||
irq_n = UART4_IRQn;
|
||||
break;
|
||||
#endif
|
||||
#if defined(UART5_BASE)
|
||||
case UART_5:
|
||||
irq_n = UART5_IRQn;
|
||||
break;
|
||||
#endif
|
||||
#if defined(LPUART1_BASE)
|
||||
case LPUART_1:
|
||||
irq_n = LPUART1_IRQn;
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
irq_n = (IRQn_Type)0;
|
||||
}
|
||||
|
||||
return irq_n;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* MBED API FUNCTIONS
|
||||
******************************************************************************/
|
||||
|
||||
/**
|
||||
* Begin asynchronous TX transfer. The used buffer is specified in the serial
|
||||
* object, tx_buff
|
||||
*
|
||||
* @param obj The serial object
|
||||
* @param tx The buffer for sending
|
||||
* @param tx_length The number of words to transmit
|
||||
* @param tx_width The bit width of buffer word
|
||||
* @param handler The serial handler
|
||||
* @param event The logical OR of events to be registered
|
||||
* @param hint A suggestion for how to use DMA with this transfer
|
||||
* @return Returns number of data transfered, or 0 otherwise
|
||||
*/
|
||||
int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint)
|
||||
{
|
||||
// TODO: DMA usage is currently ignored
|
||||
(void) hint;
|
||||
|
||||
// Check buffer is ok
|
||||
MBED_ASSERT(tx != (void *)0);
|
||||
MBED_ASSERT(tx_width == 8); // support only 8b width
|
||||
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
if (tx_length == 0) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
// Set up buffer
|
||||
serial_tx_buffer_set(obj, (void *)tx, tx_length, tx_width);
|
||||
|
||||
// Set up events
|
||||
serial_enable_event(obj, SERIAL_EVENT_TX_ALL, 0); // Clear all events
|
||||
serial_enable_event(obj, event, 1); // Set only the wanted events
|
||||
|
||||
// Enable interrupt
|
||||
IRQn_Type irq_n = serial_get_irq_n(obj_s->uart);
|
||||
NVIC_ClearPendingIRQ(irq_n);
|
||||
NVIC_DisableIRQ(irq_n);
|
||||
NVIC_SetPriority(irq_n, 1);
|
||||
NVIC_SetVector(irq_n, (uint32_t)handler);
|
||||
NVIC_EnableIRQ(irq_n);
|
||||
|
||||
// the following function will enable UART_IT_TXE and error interrupts
|
||||
if (HAL_UART_Transmit_IT(huart, (uint8_t *)tx, tx_length) != HAL_OK) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
return tx_length;
|
||||
}
|
||||
|
||||
/**
|
||||
* Begin asynchronous RX transfer (enable interrupt for data collecting)
|
||||
* The used buffer is specified in the serial object, rx_buff
|
||||
*
|
||||
* @param obj The serial object
|
||||
* @param rx The buffer for sending
|
||||
* @param rx_length The number of words to transmit
|
||||
* @param rx_width The bit width of buffer word
|
||||
* @param handler The serial handler
|
||||
* @param event The logical OR of events to be registered
|
||||
* @param handler The serial handler
|
||||
* @param char_match A character in range 0-254 to be matched
|
||||
* @param hint A suggestion for how to use DMA with this transfer
|
||||
*/
|
||||
void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint)
|
||||
{
|
||||
// TODO: DMA usage is currently ignored
|
||||
(void) hint;
|
||||
|
||||
/* Sanity check arguments */
|
||||
MBED_ASSERT(obj);
|
||||
MBED_ASSERT(rx != (void *)0);
|
||||
MBED_ASSERT(rx_width == 8); // support only 8b width
|
||||
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
serial_enable_event(obj, SERIAL_EVENT_RX_ALL, 0);
|
||||
serial_enable_event(obj, event, 1);
|
||||
|
||||
// set CharMatch
|
||||
obj->char_match = char_match;
|
||||
|
||||
serial_rx_buffer_set(obj, rx, rx_length, rx_width);
|
||||
|
||||
IRQn_Type irq_n = serial_get_irq_n(obj_s->uart);
|
||||
NVIC_ClearPendingIRQ(irq_n);
|
||||
NVIC_DisableIRQ(irq_n);
|
||||
NVIC_SetPriority(irq_n, 0);
|
||||
NVIC_SetVector(irq_n, (uint32_t)handler);
|
||||
NVIC_EnableIRQ(irq_n);
|
||||
|
||||
// following HAL function will enable the RXNE interrupt + error interrupts
|
||||
HAL_UART_Receive_IT(huart, (uint8_t *)rx, rx_length);
|
||||
}
|
||||
|
||||
/**
|
||||
* Attempts to determine if the serial peripheral is already in use for TX
|
||||
*
|
||||
* @param obj The serial object
|
||||
* @return Non-zero if the TX transaction is ongoing, 0 otherwise
|
||||
*/
|
||||
uint8_t serial_tx_active(serial_t *obj)
|
||||
{
|
||||
MBED_ASSERT(obj);
|
||||
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
return (((HAL_UART_GetState(huart) & HAL_UART_STATE_BUSY_TX) == HAL_UART_STATE_BUSY_TX) ? 1 : 0);
|
||||
}
|
||||
|
||||
/**
|
||||
* Attempts to determine if the serial peripheral is already in use for RX
|
||||
*
|
||||
* @param obj The serial object
|
||||
* @return Non-zero if the RX transaction is ongoing, 0 otherwise
|
||||
*/
|
||||
uint8_t serial_rx_active(serial_t *obj)
|
||||
{
|
||||
MBED_ASSERT(obj);
|
||||
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
return (((HAL_UART_GetState(huart) & HAL_UART_STATE_BUSY_RX) == HAL_UART_STATE_BUSY_RX) ? 1 : 0);
|
||||
}
|
||||
|
||||
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
|
||||
{
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
|
||||
volatile uint32_t tmpval __attribute__((unused)) = huart->Instance->RDR; // Clear PE flag
|
||||
} else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
|
||||
volatile uint32_t tmpval __attribute__((unused)) = huart->Instance->RDR; // Clear FE flag
|
||||
} else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_NE) != RESET) {
|
||||
volatile uint32_t tmpval __attribute__((unused)) = huart->Instance->RDR; // Clear NE flag
|
||||
} else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
|
||||
volatile uint32_t tmpval __attribute__((unused)) = huart->Instance->RDR; // Clear ORE flag
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* The asynchronous TX and RX handler.
|
||||
*
|
||||
* @param obj The serial object
|
||||
* @return Returns event flags if a TX/RX transfer termination condition was met or 0 otherwise
|
||||
*/
|
||||
int serial_irq_handler_asynch(serial_t *obj)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
volatile int return_event = 0;
|
||||
uint8_t *buf = (uint8_t *)(obj->rx_buff.buffer);
|
||||
size_t i = 0;
|
||||
|
||||
// TX PART:
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
|
||||
if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET) {
|
||||
// Return event SERIAL_EVENT_TX_COMPLETE if requested
|
||||
if ((obj_s->events & SERIAL_EVENT_TX_COMPLETE) != 0) {
|
||||
return_event |= (SERIAL_EVENT_TX_COMPLETE & obj_s->events);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Handle error events
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
|
||||
if (__HAL_UART_GET_IT(huart, UART_IT_PE) != RESET) {
|
||||
return_event |= (SERIAL_EVENT_RX_PARITY_ERROR & obj_s->events);
|
||||
}
|
||||
}
|
||||
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
|
||||
if (__HAL_UART_GET_IT(huart, UART_IT_FE) != RESET) {
|
||||
return_event |= (SERIAL_EVENT_RX_FRAMING_ERROR & obj_s->events);
|
||||
}
|
||||
}
|
||||
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
|
||||
if (__HAL_UART_GET_IT(huart, UART_IT_ORE) != RESET) {
|
||||
return_event |= (SERIAL_EVENT_RX_OVERRUN_ERROR & obj_s->events);
|
||||
}
|
||||
}
|
||||
|
||||
HAL_UART_IRQHandler(huart);
|
||||
|
||||
// Abort if an error occurs
|
||||
if ((return_event & SERIAL_EVENT_RX_PARITY_ERROR) ||
|
||||
(return_event & SERIAL_EVENT_RX_FRAMING_ERROR) ||
|
||||
(return_event & SERIAL_EVENT_RX_OVERRUN_ERROR)) {
|
||||
return return_event;
|
||||
}
|
||||
|
||||
//RX PART
|
||||
if (huart->RxXferSize != 0) {
|
||||
obj->rx_buff.pos = huart->RxXferSize - huart->RxXferCount;
|
||||
}
|
||||
if ((huart->RxXferCount == 0) && (obj->rx_buff.pos >= (obj->rx_buff.length - 1))) {
|
||||
return_event |= (SERIAL_EVENT_RX_COMPLETE & obj_s->events);
|
||||
}
|
||||
|
||||
// Check if char_match is present
|
||||
if (obj_s->events & SERIAL_EVENT_RX_CHARACTER_MATCH) {
|
||||
if (buf != NULL) {
|
||||
for (i = 0; i < obj->rx_buff.pos; i++) {
|
||||
if (buf[i] == obj->char_match) {
|
||||
obj->rx_buff.pos = i;
|
||||
return_event |= (SERIAL_EVENT_RX_CHARACTER_MATCH & obj_s->events);
|
||||
serial_rx_abort_asynch(obj);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return return_event;
|
||||
}
|
||||
|
||||
/**
|
||||
* Abort the ongoing TX transaction. It disables the enabled interupt for TX and
|
||||
* flush TX hardware buffer if TX FIFO is used
|
||||
*
|
||||
* @param obj The serial object
|
||||
*/
|
||||
void serial_tx_abort_asynch(serial_t *obj)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_TC);
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
|
||||
|
||||
// reset states
|
||||
huart->TxXferCount = 0;
|
||||
// update handle state
|
||||
if (huart->gState == HAL_UART_STATE_BUSY_TX_RX) {
|
||||
huart->gState = HAL_UART_STATE_BUSY_RX;
|
||||
} else {
|
||||
huart->gState = HAL_UART_STATE_READY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Abort the ongoing RX transaction It disables the enabled interrupt for RX and
|
||||
* flush RX hardware buffer if RX FIFO is used
|
||||
*
|
||||
* @param obj The serial object
|
||||
*/
|
||||
void serial_rx_abort_asynch(serial_t *obj)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
|
||||
|
||||
// disable interrupts
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_PE);
|
||||
__HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
|
||||
|
||||
// clear flags
|
||||
__HAL_UART_CLEAR_FLAG(huart, UART_FLAG_RXNE);
|
||||
volatile uint32_t tmpval __attribute__((unused)) = huart->Instance->RDR; // Clear errors flag
|
||||
|
||||
// reset states
|
||||
huart->RxXferCount = 0;
|
||||
// update handle state
|
||||
if (huart->RxState == HAL_UART_STATE_BUSY_TX_RX) {
|
||||
huart->RxState = HAL_UART_STATE_BUSY_TX;
|
||||
} else {
|
||||
huart->RxState = HAL_UART_STATE_READY;
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* DEVICE_SERIAL_ASYNCH */
|
||||
|
||||
#if DEVICE_SERIAL_FC
|
||||
|
||||
/**
|
||||
* Set HW Control Flow
|
||||
* @param obj The serial object
|
||||
* @param type The Control Flow type (FlowControlNone, FlowControlRTS, FlowControlCTS, FlowControlRTSCTS)
|
||||
* @param pinmap Pointer to structure which holds static pinmap
|
||||
*/
|
||||
#if STATIC_PINMAP_READY
|
||||
#define SERIAL_SET_FC_DIRECT serial_set_flow_control_direct
|
||||
void serial_set_flow_control_direct(serial_t *obj, FlowControl type, const serial_fc_pinmap_t *pinmap)
|
||||
#else
|
||||
#define SERIAL_SET_FC_DIRECT _serial_set_flow_control_direct
|
||||
static void _serial_set_flow_control_direct(serial_t *obj, FlowControl type, const serial_fc_pinmap_t *pinmap)
|
||||
#endif
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
|
||||
if (type == FlowControlNone) {
|
||||
// Disable hardware flow control
|
||||
obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
|
||||
}
|
||||
if (type == FlowControlRTS) {
|
||||
// Enable RTS
|
||||
MBED_ASSERT(pinmap->rx_flow_pin != (UARTName)NC);
|
||||
obj_s->hw_flow_ctl = UART_HWCONTROL_RTS;
|
||||
obj_s->pin_rts = pinmap->rx_flow_pin;
|
||||
// Enable the pin for RTS function
|
||||
pin_function(pinmap->rx_flow_pin, pinmap->rx_flow_function);
|
||||
pin_mode(pinmap->rx_flow_pin, PullNone);
|
||||
}
|
||||
if (type == FlowControlCTS) {
|
||||
// Enable CTS
|
||||
MBED_ASSERT(pinmap->tx_flow_pin != (UARTName)NC);
|
||||
obj_s->hw_flow_ctl = UART_HWCONTROL_CTS;
|
||||
obj_s->pin_cts = pinmap->tx_flow_pin;
|
||||
// Enable the pin for CTS function
|
||||
pin_function(pinmap->tx_flow_pin, pinmap->tx_flow_function);
|
||||
pin_mode(pinmap->tx_flow_pin, PullNone);
|
||||
}
|
||||
if (type == FlowControlRTSCTS) {
|
||||
// Enable CTS & RTS
|
||||
MBED_ASSERT(pinmap->rx_flow_pin != (UARTName)NC);
|
||||
MBED_ASSERT(pinmap->tx_flow_pin != (UARTName)NC);
|
||||
obj_s->hw_flow_ctl = UART_HWCONTROL_RTS_CTS;
|
||||
obj_s->pin_rts = pinmap->rx_flow_pin;;
|
||||
obj_s->pin_cts = pinmap->tx_flow_pin;;
|
||||
// Enable the pin for CTS function
|
||||
pin_function(pinmap->tx_flow_pin, pinmap->tx_flow_function);
|
||||
pin_mode(pinmap->tx_flow_pin, PullNone);
|
||||
// Enable the pin for RTS function
|
||||
pin_function(pinmap->rx_flow_pin, pinmap->rx_flow_function);
|
||||
pin_mode(pinmap->rx_flow_pin, PullNone);
|
||||
}
|
||||
|
||||
init_uart(obj);
|
||||
}
|
||||
|
||||
/**
|
||||
* Set HW Control Flow
|
||||
* @param obj The serial object
|
||||
* @param type The Control Flow type (FlowControlNone, FlowControlRTS, FlowControlCTS, FlowControlRTSCTS)
|
||||
* @param rxflow Pin for the rxflow
|
||||
* @param txflow Pin for the txflow
|
||||
*/
|
||||
void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow)
|
||||
{
|
||||
struct serial_s *obj_s = SERIAL_S(obj);
|
||||
|
||||
UARTName uart_rts = (UARTName)pinmap_peripheral(rxflow, PinMap_UART_RTS);
|
||||
UARTName uart_cts = (UARTName)pinmap_peripheral(txflow, PinMap_UART_CTS);
|
||||
|
||||
if (((UARTName)pinmap_merge(uart_rts, obj_s->uart) == (UARTName)NC) || ((UARTName)pinmap_merge(uart_cts, obj_s->uart) == (UARTName)NC)) {
|
||||
MBED_ASSERT(0);
|
||||
return;
|
||||
}
|
||||
|
||||
int peripheral = (int)pinmap_merge(uart_rts, uart_cts);
|
||||
|
||||
int tx_flow_function = (int)pinmap_find_function(txflow, PinMap_UART_CTS);
|
||||
int rx_flow_function = (int)pinmap_find_function(rxflow, PinMap_UART_RTS);
|
||||
|
||||
const serial_fc_pinmap_t explicit_uart_fc_pinmap = {peripheral, txflow, tx_flow_function, rxflow, rx_flow_function};
|
||||
|
||||
SERIAL_SET_FC_DIRECT(obj, type, &explicit_uart_fc_pinmap);
|
||||
}
|
||||
|
||||
#endif /* DEVICE_SERIAL_FC */
|
||||
|
||||
#endif /* DEVICE_SERIAL */
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "mbed_assert.h"
|
||||
#include "spi_api.h"
|
||||
|
||||
#if DEVICE_SPI
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "pinmap.h"
|
||||
#include "mbed_error.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
#if DEVICE_SPI_ASYNCH
|
||||
#define SPI_S(obj) (( struct spi_s *)(&(obj->spi)))
|
||||
#else
|
||||
#define SPI_S(obj) (( struct spi_s *)(obj))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Only the frequency is managed in the family specific part
|
||||
* the rest of SPI management is common to all STM32 families
|
||||
*/
|
||||
int spi_get_clock_freq(spi_t *obj)
|
||||
{
|
||||
struct spi_s *spiobj = SPI_S(obj);
|
||||
int spi_hz = 0;
|
||||
|
||||
/* Get source clock depending on SPI instance */
|
||||
switch ((int)spiobj->spi) {
|
||||
case SPI_1:
|
||||
/* SPI_1. Source CLK is PCKL2 */
|
||||
spi_hz = HAL_RCC_GetPCLK2Freq();
|
||||
break;
|
||||
#if defined(SPI2_BASE)
|
||||
case SPI_2:
|
||||
#endif
|
||||
case SPI_3:
|
||||
/* SPI_2, SPI_3. Source CLK is PCKL1 */
|
||||
spi_hz = HAL_RCC_GetPCLK1Freq();
|
||||
break;
|
||||
default:
|
||||
error("CLK: SPI instance not set");
|
||||
break;
|
||||
}
|
||||
return spi_hz;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_SPI_DEVICE_H
|
||||
#define MBED_SPI_DEVICE_H
|
||||
|
||||
#include "stm32l5xx_ll_spi.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,198 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/**
|
||||
* This file configures the system clock as follows:
|
||||
*-----------------------------------------------------------------------------
|
||||
* System clock source | 1- USE_PLL_HSE_EXTC (external 8 MHz clock)
|
||||
* | 2- USE_PLL_HSE_XTAL (external 8 MHz xtal)
|
||||
* | 3- USE_PLL_HSI (internal 16 MHz)
|
||||
* | 4- USE_PLL_MSI (internal 100kHz to 48 MHz)
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(MHz) | 110
|
||||
* AHBCLK (MHz) | 110
|
||||
* APB1CLK (MHz) | 110
|
||||
* APB2CLK (MHz) | 110
|
||||
* USB capable | NO // TODO
|
||||
*-----------------------------------------------------------------------------
|
||||
**/
|
||||
|
||||
#include "stm32l5xx.h"
|
||||
#include "nvic_addr.h"
|
||||
#include "mbed_error.h"
|
||||
#include "mbed_toolchain.h"
|
||||
|
||||
|
||||
// clock source is selected with CLOCK_SOURCE in json config
|
||||
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
|
||||
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
|
||||
#define USE_PLL_HSI 0x2 // Use HSI internal clock
|
||||
#define USE_PLL_MSI 0x1 // Use MSI internal clock
|
||||
|
||||
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
|
||||
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
|
||||
uint8_t SetSysClock_PLL_HSI(void);
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
|
||||
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
|
||||
uint8_t SetSysClock_PLL_MSI(void);
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
MBED_WEAK void SetSysClock(void)
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC)
|
||||
/* 1- Try to start with HSE and external clock */
|
||||
if (SetSysClock_PLL_HSE(1) == 0)
|
||||
#endif
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL)
|
||||
/* 2- If fail try to start with HSE and external xtal */
|
||||
if (SetSysClock_PLL_HSE(0) == 0)
|
||||
#endif
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0)
|
||||
#endif
|
||||
{
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
|
||||
/* 4- If fail start with MSI clock */
|
||||
if (SetSysClock_PLL_MSI() == 0)
|
||||
#endif
|
||||
{
|
||||
{
|
||||
error("SetSysClock failed\n");
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
return 0; // FAIL // TODO
|
||||
}
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
|
||||
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
return 0; // FAIL // TODO
|
||||
}
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
|
||||
|
||||
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by MSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_MSI(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
|
||||
/* Configure the main internal regulator output voltage */
|
||||
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE0) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Configure LSE Drive Capability */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
HAL_PWR_EnableBkUpAccess();
|
||||
__HAL_RCC_RTCAPB_CLK_ENABLE();
|
||||
|
||||
#if MBED_CONF_TARGET_LSE_AVAILABLE
|
||||
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
|
||||
|
||||
/* Enable MSI Oscillator and activate PLL with MSI as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
|
||||
#if DEVICE_TRNG
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
|
||||
#else
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_OFF;
|
||||
#endif
|
||||
|
||||
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; /* 4 MHz */
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1; /* 4 MHz */
|
||||
RCC_OscInitStruct.PLL.PLLN = 55; /* 220 MHz */
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
|
||||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; /* 110 MHz */
|
||||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; /* 110 MHz */
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; /* 110 MHz */
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; /* 110 MHz */
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; /* 110 MHz */
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; /* 110 MHz */
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
// Default STDIO is LPUART1
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
#if DEVICE_TRNG
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_RNG;
|
||||
PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_HSI48;
|
||||
#else
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
|
||||
#endif
|
||||
PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_LSE;
|
||||
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/* mbed Microcontroller Library
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef __US_TICKER_DATA_H
|
||||
#define __US_TICKER_DATA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stm32l5xx.h"
|
||||
#include "stm32l5xx_ll_tim.h"
|
||||
|
||||
#define TIM_MST TIM5
|
||||
#define TIM_MST_IRQ TIM5_IRQn
|
||||
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
|
||||
|
||||
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
|
||||
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
|
||||
|
||||
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
|
||||
|
||||
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __US_TICKER_DATA_H
|
||||
Loading…
Reference in New Issue