Merged bugfixes and improvments for LPC1768 target to LPC4088 target

libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC408X/LPC407x_8x_177x_8x.h

@@ -34,7 +34,9 @@
 #ifndef __LPC407x_8x_177x_8x_H__
 #define __LPC407x_8x_177x_8x_H__
 
-#define CORE_M4
+#if defined(__CORTEX_M4) && !defined(CORE_M4)
+  #define CORE_M4
+#endif
 
 // ##################
 // Code Red - excluded extern "C" as unrequired

libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC408X/TOOLCHAIN_ARM_STD/TARGET_LPC4088_EA/LPC407X_8X.sct

@@ -11,7 +11,10 @@ LR_IROM1 0x00000000 0x00080000  {    ; load region size_region
   RW_IRAM1 0x100000E8 0x0000FF18  {  ; RW data
    .ANY (+RW +ZI)
   }
-  RW_IRAM2 0x20000000 0x00008000  {
+  RW_IRAM2 0x20000000 0x00004000  {
+   .ANY (AHBSRAM0)
+  }
+  RW_IRAM3 0x20004000 0x00004000  {
    .ANY (AHBSRAM1)
   }
 }

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/analogin_api.c

@@ -43,7 +43,7 @@ static const PinMap PinMap_ADC[] = {
 
 void analogin_init(analogin_t *obj, PinName pin) {
     obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
-    if (obj->adc == (uint32_t)NC) {
+    if (obj->adc == (ADCName)NC) {
         error("ADC pin mapping failed");
     }
     

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/analogout_api.c

@@ -25,7 +25,7 @@ static const PinMap PinMap_DAC[] = {
 
 void analogout_init(dac_t *obj, PinName pin) {
     obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
-    if (obj->dac == (uint32_t)NC) {
+    if (obj->dac == (DACName)NC) {
         error("DAC pin mapping failed");
     }
     

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/can_api.c

@@ -164,7 +164,7 @@ void can_irq_set(can_t *obj, CanIrqType type, uint32_t enable) {
     obj->dev->MOD &= ~(1);
     
     // Enable NVIC if at least 1 interrupt is active
-    if((LPC_CAN1->IER | LPC_CAN2->IER) != 0) {
+    if(((LPC_SC->PCONP & (1 << 13)) && LPC_CAN1->IER) || ((LPC_SC->PCONP & (1 << 14)) && LPC_CAN2->IER)) {
         NVIC_SetVector(CAN_IRQn, (uint32_t) &can_irq_n);
         NVIC_EnableIRQ(CAN_IRQn);
     }

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/ethernet_api.c

@@ -722,7 +722,7 @@ int ethernet_receive() {
     if(receive_idx == -1) {
       receive_idx = LPC_EMAC->RxConsumeIndex;
     } else {
-        while(!(rxstat[receive_idx].Info & RINFO_LAST_FLAG) && (receive_idx != LPC_EMAC->RxProduceIndex)) {
+        while(!(rxstat[receive_idx].Info & RINFO_LAST_FLAG) && ((uint32_t)receive_idx != LPC_EMAC->RxProduceIndex)) {
             receive_idx  = rinc(receive_idx, NUM_RX_FRAG);
         }
         unsigned int info =   rxstat[receive_idx].Info;
@@ -738,7 +738,7 @@ int ethernet_receive() {
         LPC_EMAC->RxConsumeIndex = receive_idx;
     }
 
-    if(receive_idx == LPC_EMAC->RxProduceIndex) {
+    if((uint32_t)receive_idx == LPC_EMAC->RxProduceIndex) {
         receive_idx = -1;
         return 0;
     }
@@ -787,7 +787,7 @@ int ethernet_read(char *data, int dlen) {
     void        *pdst, *psrc;
     int          doff = 0;
 
-    if(receive_idx == LPC_EMAC->RxProduceIndex || receive_idx == -1) {
+    if((uint32_t)receive_idx == LPC_EMAC->RxProduceIndex || receive_idx == -1) {
         return 0;
     }
 

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/gpio_irq_api.c

@@ -30,44 +30,66 @@ static void handle_interrupt_in(void) {
     uint32_t fall0 = LPC_GPIOINT->IO0IntStatF;
     uint32_t rise2 = LPC_GPIOINT->IO2IntStatR;
     uint32_t fall2 = LPC_GPIOINT->IO2IntStatF;
-    uint32_t mask0 = 0;
-    uint32_t mask2 = 0;
-    int i;
 
-    // P0.0-0.31
+    uint8_t bitloc;
-    for (i = 0; i < 32; i++) {
+
-        uint32_t pmask = (1 << i);
+    // Continue as long as there are interrupts pending
-        if (rise0 & pmask) {
+    while(rise0 > 0) {
-            mask0 |= pmask;
+        // CLZ returns number of leading zeros, 31 minus that is location of
-            if (channel_ids[i] != 0)
+        // first pending interrupt
-                irq_handler(channel_ids[i], IRQ_RISE);
+        bitloc = 31 - __CLZ(rise0);
-        }
+        if (channel_ids[bitloc] != 0)
-        if (fall0 & pmask) {
+            irq_handler(channel_ids[bitloc], IRQ_RISE); //Run that interrupt
-            mask0 |= pmask;
+
-            if (channel_ids[i] != 0)
+        // Both clear the interrupt with clear register, and remove it from
-                irq_handler(channel_ids[i], IRQ_FALL);
+        // our local copy of the interrupt pending register
-        }
+        LPC_GPIOINT->IO0IntClr = 1 << bitloc;
+        rise0 -= 1<<bitloc;
     }
 
-    // P2.0-2.31
+    // Continue as long as there are interrupts pending
-    for (i = 0; i < 32; i++) {
+    while(fall0 > 0) {
-        uint32_t pmask = (1 << i);
+        // CLZ returns number of leading zeros, 31 minus that is location of
-        int channel_index = i + 32;
+        // first pending interrupt
-        if (rise2 & pmask) {
+        bitloc = 31 - __CLZ(fall0);
-            mask2 |= pmask;
+        if (channel_ids[bitloc] != 0)
-            if (channel_ids[channel_index] != 0)
+            irq_handler(channel_ids[bitloc], IRQ_FALL); //Run that interrupt
-                irq_handler(channel_ids[channel_index], IRQ_RISE);
+
-        }
+        // Both clear the interrupt with clear register, and remove it from
-        if (fall2 & pmask) {
+        // our local copy of the interrupt pending register
-            mask2 |= pmask;
+        LPC_GPIOINT->IO0IntClr = 1 << bitloc;
-            if (channel_ids[channel_index] != 0)
+        fall0 -= 1<<bitloc;
-                irq_handler(channel_ids[channel_index], IRQ_FALL);
-        }
     }
 
-    // Clear the interrupts we just handled
+    // Same for port 2
-    LPC_GPIOINT->IO0IntClr = mask0;
+
-    LPC_GPIOINT->IO2IntClr = mask2;
+    // Continue as long as there are interrupts pending
+    while(rise2 > 0) {
+        // CLZ returns number of leading zeros, 31 minus that is location of
+        // first pending interrupt
+        bitloc = 31 - __CLZ(rise2);
+        if (channel_ids[bitloc+32] != 0)
+            irq_handler(channel_ids[bitloc+32], IRQ_RISE); //Run that interrupt
+
+        // Both clear the interrupt with clear register, and remove it from
+        // our local copy of the interrupt pending register
+        LPC_GPIOINT->IO2IntClr = 1 << bitloc;
+        rise2 -= 1<<bitloc;
+    }
+
+    // Continue as long as there are interrupts pending
+    while(fall2 > 0) {
+        // CLZ returns number of leading zeros, 31 minus that is location of
+        // first pending interrupt
+        bitloc = 31 - __CLZ(fall2);
+        if (channel_ids[bitloc+32] != 0)
+            irq_handler(channel_ids[bitloc+32], IRQ_FALL); //Run that interrupt
+
+        // Both clear the interrupt with clear register, and remove it from
+        // our local copy of the interrupt pending register
+        LPC_GPIOINT->IO2IntClr = 1 << bitloc;
+        fall2 -= 1<<bitloc;
+    }
 }
 
 int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) {

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/pinmap.c

@@ -17,7 +17,7 @@
 #include "error.h"
 
 void pin_function(PinName pin, int function) {
-    if (pin == (uint32_t)NC) return;
+    if (pin == (PinName)NC) return;
     
     __IO uint32_t *reg = (__IO uint32_t*) (LPC_IOCON_BASE + 4 * pin);
     
@@ -26,7 +26,7 @@ void pin_function(PinName pin, int function) {
 }
 
 void pin_mode(PinName pin, PinMode mode) {
-    if (pin == (uint32_t)NC) { return; }
+    if (pin == (PinName)NC) { return; }
     
     uint32_t drain = ((uint32_t) mode & (uint32_t) OpenDrain) >> 2;
     

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/pwmout_api.c

@@ -66,7 +66,7 @@ static unsigned int pwm_clock_mhz;
 void pwmout_init(pwmout_t* obj, PinName pin) {
     // determine the channel
     PWMName pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-    if (pwm == (uint32_t)NC)
+    if (pwm == (PWMName)NC)
         error("PwmOut pin mapping failed");
     
     obj->channel = pwm;

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC408X/serial_api.c

@@ -287,9 +287,10 @@ int serial_writable(serial_t *obj) {
 }
 
 void serial_clear(serial_t *obj) {
-    obj->uart->FCR = 1 << 1  // rx FIFO reset
+    obj->uart->FCR = 1 << 0  // FIFO Enable - 0 = Disables, 1 = Enabled
-                   | 1 << 2  // tx FIFO reset
+            | 1 << 1  // rx FIFO reset
-                   | 0 << 6; // interrupt depth
+            | 1 << 2  // tx FIFO reset
+            | 0 << 6; // interrupt depth
 }
 
 void serial_pinout_tx(PinName tx) {

workspace_tools/export/uvision4_lpc4088.uvproj.tmpl

@@ -385,6 +385,7 @@
             {% for file in object_files %}
               {{file}}
             {% endfor %}
+                --any_placement=first_fit
             </Misc>
             <LinkerInputFile></LinkerInputFile>
             <DisabledWarnings></DisabledWarnings>