diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.c new file mode 100644 index 0000000000..cda6d4025b --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.c @@ -0,0 +1,35 @@ +/******************************************************************************* +* File Name: cycfg.c +* +* Description: +* Wrapper function to initialize all generated code. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg.h" + +void init_cycfg_all(void) +{ + init_cycfg_system(); + init_cycfg_clocks(); + init_cycfg_dmas(); + init_cycfg_routing(); + init_cycfg_peripherals(); + init_cycfg_pins(); +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.h new file mode 100644 index 0000000000..3585cf91ba --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.h @@ -0,0 +1,48 @@ +/******************************************************************************* +* File Name: cycfg.h +* +* Description: +* Simple wrapper header containing all generated files. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_H) +#define CYCFG_H + +#if defined(__cplusplus) +extern "C" { +#endif + +#include "cycfg_notices.h" +#include "cycfg_system.h" +#include "cycfg_clocks.h" +#include "cycfg_dmas.h" +#include "cycfg_routing.h" +#include "cycfg_peripherals.h" +#include "cycfg_pins.h" + +void init_cycfg_all(void); + + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.timestamp b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.timestamp new file mode 100644 index 0000000000..6911b5befd --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg.timestamp @@ -0,0 +1,24 @@ +/******************************************************************************* +* File Name: cycfg.timestamp +* +* Description: +* Sentinel file for determining if generated source is up to date. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_clocks.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_clocks.c new file mode 100644 index 0000000000..151484a1da --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_clocks.c @@ -0,0 +1,105 @@ +/******************************************************************************* +* File Name: cycfg_clocks.c +* +* Description: +* Clock configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_clocks.h" + +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_USB_CLK_DIV_obj = + { + .type = CYHAL_RSC_CLOCK, + .block_num = CYBSP_USB_CLK_DIV_HW, + .channel_num = CYBSP_USB_CLK_DIV_NUM, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_SDIO_DIV_obj = + { + .type = CYHAL_RSC_CLOCK, + .block_num = CYBSP_SDIO_DIV_HW, + .channel_num = CYBSP_SDIO_DIV_NUM, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_COMM_CLK_DIV_obj = + { + .type = CYHAL_RSC_CLOCK, + .block_num = CYBSP_CSD_COMM_CLK_DIV_HW, + .channel_num = CYBSP_CSD_COMM_CLK_DIV_NUM, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_CLK_DIV_obj = + { + .type = CYHAL_RSC_CLOCK, + .block_num = CYBSP_CSD_CLK_DIV_HW, + .channel_num = CYBSP_CSD_CLK_DIV_NUM, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t peri_0_div_8_4_obj = + { + .type = CYHAL_RSC_CLOCK, + .block_num = peri_0_div_8_4_HW, + .channel_num = peri_0_div_8_4_NUM, + }; +#endif //defined (CY_USING_HAL) + + +void init_cycfg_clocks(void) +{ + Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_16_BIT, 0U); + Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_16_BIT, 0U, 999U); + Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_16_BIT, 0U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_USB_CLK_DIV_obj); +#endif //defined (CY_USING_HAL) + + Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_8_BIT, 0U); + Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_8_BIT, 0U, 0U); + Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_8_BIT, 0U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_SDIO_DIV_obj); +#endif //defined (CY_USING_HAL) + + Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_8_BIT, 1U); + Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_8_BIT, 1U, 7U); + Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_8_BIT, 1U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_COMM_CLK_DIV_obj); +#endif //defined (CY_USING_HAL) + + Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_8_BIT, 3U); + Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_8_BIT, 3U, 255U); + Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_8_BIT, 3U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_CLK_DIV_obj); +#endif //defined (CY_USING_HAL) + + Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_8_BIT, 4U); + Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_8_BIT, 4U, 108U); + Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_8_BIT, 4U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&peri_0_div_8_4_obj); +#endif //defined (CY_USING_HAL) +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_clocks.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_clocks.h new file mode 100644 index 0000000000..516b0c3730 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_clocks.h @@ -0,0 +1,77 @@ +/******************************************************************************* +* File Name: cycfg_clocks.h +* +* Description: +* Clock configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_CLOCKS_H) +#define CYCFG_CLOCKS_H + +#include "cycfg_notices.h" +#include "cy_sysclk.h" +#if defined (CY_USING_HAL) + #include "cyhal_hwmgr.h" +#endif //defined (CY_USING_HAL) + +#if defined(__cplusplus) +extern "C" { +#endif + +#define CYBSP_USB_CLK_DIV_ENABLED 1U +#define CYBSP_USB_CLK_DIV_HW CY_SYSCLK_DIV_16_BIT +#define CYBSP_USB_CLK_DIV_NUM 0U +#define CYBSP_SDIO_DIV_ENABLED 1U +#define CYBSP_SDIO_DIV_HW CY_SYSCLK_DIV_8_BIT +#define CYBSP_SDIO_DIV_NUM 0U +#define CYBSP_CSD_COMM_CLK_DIV_ENABLED 1U +#define CYBSP_CSD_COMM_CLK_DIV_HW CY_SYSCLK_DIV_8_BIT +#define CYBSP_CSD_COMM_CLK_DIV_NUM 1U +#define CYBSP_CSD_CLK_DIV_ENABLED 1U +#define CYBSP_CSD_CLK_DIV_HW CY_SYSCLK_DIV_8_BIT +#define CYBSP_CSD_CLK_DIV_NUM 3U +#define peri_0_div_8_4_ENABLED 1U +#define peri_0_div_8_4_HW CY_SYSCLK_DIV_8_BIT +#define peri_0_div_8_4_NUM 4U + +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_USB_CLK_DIV_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_SDIO_DIV_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_COMM_CLK_DIV_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_CLK_DIV_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t peri_0_div_8_4_obj; +#endif //defined (CY_USING_HAL) + +void init_cycfg_clocks(void); + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_CLOCKS_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_dmas.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_dmas.c new file mode 100644 index 0000000000..d0fb17458f --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_dmas.c @@ -0,0 +1,262 @@ +/******************************************************************************* +* File Name: cycfg_dmas.c +* +* Description: +* DMA configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_dmas.h" + +const cy_stc_dma_descriptor_config_t cpuss_0_dw0_0_chan_0_Descriptor_0_config = +{ + .retrigger = CY_DMA_RETRIG_IM, + .interruptType = CY_DMA_1ELEMENT, + .triggerOutType = CY_DMA_1ELEMENT, + .channelState = CY_DMA_CHANNEL_DISABLED, + .triggerInType = CY_DMA_1ELEMENT, + .dataSize = CY_DMA_BYTE, + .srcTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .dstTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .descriptorType = CY_DMA_1D_TRANSFER, + .srcAddress = NULL, + .dstAddress = NULL, + .srcXincrement = 0, + .dstXincrement = 1, + .xCount = 6, + .srcYincrement = 0, + .dstYincrement = 0, + .yCount = 1, + .nextDescriptor = NULL, +}; +cy_stc_dma_descriptor_t cpuss_0_dw0_0_chan_0_Descriptor_0 = +{ + .ctl = 0UL, + .src = 0UL, + .dst = 0UL, + .xCtl = 0UL, + .yCtl = 0UL, + .nextPtr = 0UL, +}; +const cy_stc_dma_channel_config_t cpuss_0_dw0_0_chan_0_channelConfig = +{ + .descriptor = &cpuss_0_dw0_0_chan_0_Descriptor_0, + .preemptable = true, + .priority = 1, + .enable = false, + .bufferable = false, +}; +const cy_stc_dma_crc_config_t cpuss_0_dw0_0_chan_0_crcConfig = +{ + .dataReverse = false, + .dataXor = 0, + .reminderReverse = false, + .reminderXor = 0, + .polynomial = 79764919, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t cpuss_0_dw0_0_chan_0_obj = + { + .type = CYHAL_RSC_DMA, + .block_num = 0U, + .channel_num = cpuss_0_dw0_0_chan_0_CHANNEL, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_dma_descriptor_config_t cpuss_0_dw0_0_chan_1_Descriptor_0_config = +{ + .retrigger = CY_DMA_RETRIG_16CYC, + .interruptType = CY_DMA_1ELEMENT, + .triggerOutType = CY_DMA_1ELEMENT, + .channelState = CY_DMA_CHANNEL_DISABLED, + .triggerInType = CY_DMA_1ELEMENT, + .dataSize = CY_DMA_BYTE, + .srcTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .dstTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .descriptorType = CY_DMA_1D_TRANSFER, + .srcAddress = NULL, + .dstAddress = NULL, + .srcXincrement = 1, + .dstXincrement = 0, + .xCount = 5, + .srcYincrement = 0, + .dstYincrement = 0, + .yCount = 1, + .nextDescriptor = NULL, +}; +cy_stc_dma_descriptor_t cpuss_0_dw0_0_chan_1_Descriptor_0 = +{ + .ctl = 0UL, + .src = 0UL, + .dst = 0UL, + .xCtl = 0UL, + .yCtl = 0UL, + .nextPtr = 0UL, +}; +const cy_stc_dma_channel_config_t cpuss_0_dw0_0_chan_1_channelConfig = +{ + .descriptor = &cpuss_0_dw0_0_chan_1_Descriptor_0, + .preemptable = true, + .priority = 1, + .enable = false, + .bufferable = false, +}; +const cy_stc_dma_crc_config_t cpuss_0_dw0_0_chan_1_crcConfig = +{ + .dataReverse = false, + .dataXor = 0, + .reminderReverse = false, + .reminderXor = 0, + .polynomial = 79764919, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t cpuss_0_dw0_0_chan_1_obj = + { + .type = CYHAL_RSC_DMA, + .block_num = 0U, + .channel_num = cpuss_0_dw0_0_chan_1_CHANNEL, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_dma_descriptor_config_t cpuss_0_dw1_0_chan_1_Descriptor_0_config = +{ + .retrigger = CY_DMA_RETRIG_4CYC, + .interruptType = CY_DMA_DESCR, + .triggerOutType = CY_DMA_1ELEMENT, + .channelState = CY_DMA_CHANNEL_DISABLED, + .triggerInType = CY_DMA_X_LOOP, + .dataSize = CY_DMA_HALFWORD, + .srcTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .dstTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .descriptorType = CY_DMA_2D_TRANSFER, + .srcAddress = NULL, + .dstAddress = NULL, + .srcXincrement = 2, + .dstXincrement = 0, + .xCount = 10, + .srcYincrement = 10, + .dstYincrement = 0, + .yCount = 2, + .nextDescriptor = NULL, +}; +cy_stc_dma_descriptor_t cpuss_0_dw1_0_chan_1_Descriptor_0 = +{ + .ctl = 0UL, + .src = 0UL, + .dst = 0UL, + .xCtl = 0UL, + .yCtl = 0UL, + .nextPtr = 0UL, +}; +const cy_stc_dma_channel_config_t cpuss_0_dw1_0_chan_1_channelConfig = +{ + .descriptor = &cpuss_0_dw1_0_chan_1_Descriptor_0, + .preemptable = false, + .priority = 0, + .enable = false, + .bufferable = false, +}; +const cy_stc_dma_crc_config_t cpuss_0_dw1_0_chan_1_crcConfig = +{ + .dataReverse = false, + .dataXor = 0, + .reminderReverse = false, + .reminderXor = 0, + .polynomial = 79764919, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t cpuss_0_dw1_0_chan_1_obj = + { + .type = CYHAL_RSC_DMA, + .block_num = 1U, + .channel_num = cpuss_0_dw1_0_chan_1_CHANNEL, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_dma_descriptor_config_t cpuss_0_dw1_0_chan_3_Descriptor_0_config = +{ + .retrigger = CY_DMA_RETRIG_IM, + .interruptType = CY_DMA_DESCR, + .triggerOutType = CY_DMA_1ELEMENT, + .channelState = CY_DMA_CHANNEL_DISABLED, + .triggerInType = CY_DMA_X_LOOP, + .dataSize = CY_DMA_HALFWORD, + .srcTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .dstTransferSize = CY_DMA_TRANSFER_SIZE_DATA, + .descriptorType = CY_DMA_2D_TRANSFER, + .srcAddress = NULL, + .dstAddress = NULL, + .srcXincrement = 0, + .dstXincrement = 2, + .xCount = 10, + .srcYincrement = 0, + .dstYincrement = 10, + .yCount = 2, + .nextDescriptor = NULL, +}; +cy_stc_dma_descriptor_t cpuss_0_dw1_0_chan_3_Descriptor_0 = +{ + .ctl = 0UL, + .src = 0UL, + .dst = 0UL, + .xCtl = 0UL, + .yCtl = 0UL, + .nextPtr = 0UL, +}; +const cy_stc_dma_channel_config_t cpuss_0_dw1_0_chan_3_channelConfig = +{ + .descriptor = &cpuss_0_dw1_0_chan_3_Descriptor_0, + .preemptable = false, + .priority = 0, + .enable = false, + .bufferable = false, +}; +const cy_stc_dma_crc_config_t cpuss_0_dw1_0_chan_3_crcConfig = +{ + .dataReverse = false, + .dataXor = 0, + .reminderReverse = false, + .reminderXor = 0, + .polynomial = 79764919, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t cpuss_0_dw1_0_chan_3_obj = + { + .type = CYHAL_RSC_DMA, + .block_num = 1U, + .channel_num = cpuss_0_dw1_0_chan_3_CHANNEL, + }; +#endif //defined (CY_USING_HAL) + + +void init_cycfg_dmas(void) +{ +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&cpuss_0_dw0_0_chan_0_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&cpuss_0_dw0_0_chan_1_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&cpuss_0_dw1_0_chan_1_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&cpuss_0_dw1_0_chan_3_obj); +#endif //defined (CY_USING_HAL) +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_dmas.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_dmas.h new file mode 100644 index 0000000000..e600fb5ce1 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_dmas.h @@ -0,0 +1,91 @@ +/******************************************************************************* +* File Name: cycfg_dmas.h +* +* Description: +* DMA configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_DMAS_H) +#define CYCFG_DMAS_H + +#include "cycfg_notices.h" +#include "cy_dma.h" +#if defined (CY_USING_HAL) + #include "cyhal_hwmgr.h" +#endif //defined (CY_USING_HAL) + +#if defined(__cplusplus) +extern "C" { +#endif + +#define cpuss_0_dw0_0_chan_0_ENABLED 1U +#define cpuss_0_dw0_0_chan_0_HW DW0 +#define cpuss_0_dw0_0_chan_0_CHANNEL 0U +#define cpuss_0_dw0_0_chan_0_IRQ cpuss_interrupts_dw0_0_IRQn +#define cpuss_0_dw0_0_chan_1_ENABLED 1U +#define cpuss_0_dw0_0_chan_1_HW DW0 +#define cpuss_0_dw0_0_chan_1_CHANNEL 1U +#define cpuss_0_dw0_0_chan_1_IRQ cpuss_interrupts_dw0_1_IRQn +#define cpuss_0_dw1_0_chan_1_ENABLED 1U +#define cpuss_0_dw1_0_chan_1_HW DW1 +#define cpuss_0_dw1_0_chan_1_CHANNEL 1U +#define cpuss_0_dw1_0_chan_1_IRQ cpuss_interrupts_dw1_1_IRQn +#define cpuss_0_dw1_0_chan_3_ENABLED 1U +#define cpuss_0_dw1_0_chan_3_HW DW1 +#define cpuss_0_dw1_0_chan_3_CHANNEL 3U +#define cpuss_0_dw1_0_chan_3_IRQ cpuss_interrupts_dw1_3_IRQn + +extern const cy_stc_dma_descriptor_config_t cpuss_0_dw0_0_chan_0_Descriptor_0_config; +extern cy_stc_dma_descriptor_t cpuss_0_dw0_0_chan_0_Descriptor_0; +extern const cy_stc_dma_channel_config_t cpuss_0_dw0_0_chan_0_channelConfig; +extern const cy_stc_dma_crc_config_t cpuss_0_dw0_0_chan_0_crcConfig; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t cpuss_0_dw0_0_chan_0_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_dma_descriptor_config_t cpuss_0_dw0_0_chan_1_Descriptor_0_config; +extern cy_stc_dma_descriptor_t cpuss_0_dw0_0_chan_1_Descriptor_0; +extern const cy_stc_dma_channel_config_t cpuss_0_dw0_0_chan_1_channelConfig; +extern const cy_stc_dma_crc_config_t cpuss_0_dw0_0_chan_1_crcConfig; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t cpuss_0_dw0_0_chan_1_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_dma_descriptor_config_t cpuss_0_dw1_0_chan_1_Descriptor_0_config; +extern cy_stc_dma_descriptor_t cpuss_0_dw1_0_chan_1_Descriptor_0; +extern const cy_stc_dma_channel_config_t cpuss_0_dw1_0_chan_1_channelConfig; +extern const cy_stc_dma_crc_config_t cpuss_0_dw1_0_chan_1_crcConfig; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t cpuss_0_dw1_0_chan_1_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_dma_descriptor_config_t cpuss_0_dw1_0_chan_3_Descriptor_0_config; +extern cy_stc_dma_descriptor_t cpuss_0_dw1_0_chan_3_Descriptor_0; +extern const cy_stc_dma_channel_config_t cpuss_0_dw1_0_chan_3_channelConfig; +extern const cy_stc_dma_crc_config_t cpuss_0_dw1_0_chan_3_crcConfig; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t cpuss_0_dw1_0_chan_3_obj; +#endif //defined (CY_USING_HAL) + +void init_cycfg_dmas(void); + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_DMAS_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_notices.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_notices.h new file mode 100644 index 0000000000..90f1013f8a --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_notices.h @@ -0,0 +1,30 @@ +/******************************************************************************* +* File Name: cycfg_notices.h +* +* Description: +* Contains warnings and errors that occurred while generating code for the +* design. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_NOTICES_H) +#define CYCFG_NOTICES_H + + +#endif /* CYCFG_NOTICES_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_peripherals.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_peripherals.c new file mode 100644 index 0000000000..9aeb651afb --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_peripherals.c @@ -0,0 +1,210 @@ +/******************************************************************************* +* File Name: cycfg_peripherals.c +* +* Description: +* Peripheral Hardware Block configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_peripherals.h" + +#define CYBSP_USBUART_INTR_LVL_SEL (CY_USBFS_DEV_DRV_SET_SOF_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_BUS_RESET_LVL(0x2U) | \ + CY_USBFS_DEV_DRV_SET_EP0_LVL(0x2U) | \ + CY_USBFS_DEV_DRV_SET_LPM_LVL(0x0U) | \ + CY_USBFS_DEV_DRV_SET_ARB_EP_LVL(0x0U) | \ + CY_USBFS_DEV_DRV_SET_EP1_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP2_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP3_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP4_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP5_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP6_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP7_LVL(0x1U) | \ + CY_USBFS_DEV_DRV_SET_EP8_LVL(0x1U)) + +cy_stc_csd_context_t cy_csd_0_context = +{ + .lockKey = CY_CSD_NONE_KEY, +}; +const cy_stc_scb_uart_config_t CYBSP_BT_UART_config = +{ + .uartMode = CY_SCB_UART_STANDARD, + .enableMutliProcessorMode = false, + .smartCardRetryOnNack = false, + .irdaInvertRx = false, + .irdaEnableLowPowerReceiver = false, + .oversample = 8, + .enableMsbFirst = false, + .dataWidth = 8UL, + .parity = CY_SCB_UART_PARITY_NONE, + .stopBits = CY_SCB_UART_STOP_BITS_1, + .enableInputFilter = false, + .breakWidth = 11UL, + .dropOnFrameError = false, + .dropOnParityError = false, + .receiverAddress = 0x0UL, + .receiverAddressMask = 0x0UL, + .acceptAddrInFifo = false, + .enableCts = true, + .ctsPolarity = CY_SCB_UART_ACTIVE_LOW, + .rtsRxFifoLevel = 63, + .rtsPolarity = CY_SCB_UART_ACTIVE_LOW, + .rxFifoTriggerLevel = 1UL, + .rxFifoIntEnableMask = 0UL, + .txFifoTriggerLevel = 63UL, + .txFifoIntEnableMask = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_UART_obj = + { + .type = CYHAL_RSC_SCB, + .block_num = 2U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_scb_ezi2c_config_t CYBSP_CSD_COMM_config = +{ + .numberOfAddresses = CY_SCB_EZI2C_ONE_ADDRESS, + .slaveAddress1 = 8U, + .slaveAddress2 = 0U, + .subAddressSize = CY_SCB_EZI2C_SUB_ADDR16_BITS, + .enableWakeFromSleep = false, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_COMM_obj = + { + .type = CYHAL_RSC_SCB, + .block_num = 3U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_smif_config_t CYBSP_QSPI_config = +{ + .mode = (uint32_t)CY_SMIF_NORMAL, + .deselectDelay = CYBSP_QSPI_DESELECT_DELAY, + .rxClockSel = (uint32_t)CY_SMIF_SEL_INV_INTERNAL_CLK, + .blockEvent = (uint32_t)CY_SMIF_BUS_ERROR, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_obj = + { + .type = CYHAL_RSC_SMIF, + .block_num = 0U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_mcwdt_config_t CYBSP_MCWDT0_config = +{ + .c0Match = 32768U, + .c1Match = 32768U, + .c0Mode = CY_MCWDT_MODE_NONE, + .c1Mode = CY_MCWDT_MODE_NONE, + .c2ToggleBit = 16U, + .c2Mode = CY_MCWDT_MODE_NONE, + .c0ClearOnMatch = false, + .c1ClearOnMatch = false, + .c0c1Cascade = true, + .c1c2Cascade = false, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_MCWDT0_obj = + { + .type = CYHAL_RSC_LPTIMER, + .block_num = 0U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_rtc_config_t CYBSP_RTC_config = +{ + .sec = 0U, + .min = 0U, + .hour = 12U, + .amPm = CY_RTC_AM, + .hrFormat = CY_RTC_24_HOURS, + .dayOfWeek = CY_RTC_SUNDAY, + .date = 1U, + .month = CY_RTC_JANUARY, + .year = 0U, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_RTC_obj = + { + .type = CYHAL_RSC_RTC, + .block_num = 0U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_usbfs_dev_drv_config_t CYBSP_USBUART_config = +{ + .mode = CY_USBFS_DEV_DRV_EP_MANAGEMENT_CPU, + .epAccess = CY_USBFS_DEV_DRV_USE_8_BITS_DR, + .epBuffer = NULL, + .epBufferSize = 0U, + .dmaConfig[0] = NULL, + .dmaConfig[1] = NULL, + .dmaConfig[2] = NULL, + .dmaConfig[3] = NULL, + .dmaConfig[4] = NULL, + .dmaConfig[5] = NULL, + .dmaConfig[6] = NULL, + .dmaConfig[7] = NULL, + .enableLpm = false, + .intrLevelSel = CYBSP_USBUART_INTR_LVL_SEL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_USBUART_obj = + { + .type = CYHAL_RSC_USB, + .block_num = 0U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) + + +void init_cycfg_peripherals(void) +{ + Cy_SysClk_PeriphAssignDivider(PCLK_CSD_CLOCK, CY_SYSCLK_DIV_8_BIT, 3U); + + Cy_SysClk_PeriphAssignDivider(PCLK_SCB2_CLOCK, CY_SYSCLK_DIV_8_BIT, 4U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_UART_obj); +#endif //defined (CY_USING_HAL) + + Cy_SysClk_PeriphAssignDivider(PCLK_SCB3_CLOCK, CY_SYSCLK_DIV_8_BIT, 1U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_COMM_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_MCWDT0_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_RTC_obj); +#endif //defined (CY_USING_HAL) + + Cy_SysClk_PeriphAssignDivider(PCLK_USB_CLOCK_DEV_BRS, CY_SYSCLK_DIV_16_BIT, 0U); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_USBUART_obj); +#endif //defined (CY_USING_HAL) +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_peripherals.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_peripherals.h new file mode 100644 index 0000000000..3d5385559e --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_peripherals.h @@ -0,0 +1,159 @@ +/******************************************************************************* +* File Name: cycfg_peripherals.h +* +* Description: +* Peripheral Hardware Block configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_PERIPHERALS_H) +#define CYCFG_PERIPHERALS_H + +#include "cycfg_notices.h" +#include "cy_sysclk.h" +#include "cy_csd.h" +#include "cy_scb_uart.h" +#if defined (CY_USING_HAL) + #include "cyhal_hwmgr.h" +#endif //defined (CY_USING_HAL) +#include "cy_scb_ezi2c.h" +#include "cy_smif.h" +#include "cycfg_qspi_memslot.h" +#include "cy_mcwdt.h" +#include "cy_rtc.h" +#include "cy_usbfs_dev_drv.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +#define CYBSP_CSD_ENABLED 1U +#define CY_CAPSENSE_CORE 4u +#define CY_CAPSENSE_CPU_CLK 100000000u +#define CY_CAPSENSE_PERI_CLK 100000000u +#define CY_CAPSENSE_VDDA_MV 3300u +#define CY_CAPSENSE_PERI_DIV_TYPE CY_SYSCLK_DIV_8_BIT +#define CY_CAPSENSE_PERI_DIV_INDEX 3u +#define Cmod_PORT GPIO_PRT7 +#define CintA_PORT GPIO_PRT7 +#define CintB_PORT GPIO_PRT7 +#define Button0_Rx0_PORT GPIO_PRT8 +#define Button0_Tx_PORT GPIO_PRT1 +#define Button1_Rx0_PORT GPIO_PRT8 +#define Button1_Tx_PORT GPIO_PRT1 +#define LinearSlider0_Sns0_PORT GPIO_PRT8 +#define LinearSlider0_Sns1_PORT GPIO_PRT8 +#define LinearSlider0_Sns2_PORT GPIO_PRT8 +#define LinearSlider0_Sns3_PORT GPIO_PRT8 +#define LinearSlider0_Sns4_PORT GPIO_PRT8 +#define Cmod_PIN 7u +#define CintA_PIN 1u +#define CintB_PIN 2u +#define Button0_Rx0_PIN 1u +#define Button0_Tx_PIN 0u +#define Button1_Rx0_PIN 2u +#define Button1_Tx_PIN 0u +#define LinearSlider0_Sns0_PIN 3u +#define LinearSlider0_Sns1_PIN 4u +#define LinearSlider0_Sns2_PIN 5u +#define LinearSlider0_Sns3_PIN 6u +#define LinearSlider0_Sns4_PIN 7u +#define Cmod_PORT_NUM 7u +#define CintA_PORT_NUM 7u +#define CintB_PORT_NUM 7u +#define CYBSP_CSD_HW CSD0 +#define CYBSP_CSD_IRQ csd_interrupt_IRQn +#define CYBSP_BT_UART_ENABLED 1U +#define CYBSP_BT_UART_HW SCB2 +#define CYBSP_BT_UART_IRQ scb_2_interrupt_IRQn +#define CYBSP_CSD_COMM_ENABLED 1U +#define CYBSP_CSD_COMM_HW SCB3 +#define CYBSP_CSD_COMM_IRQ scb_3_interrupt_IRQn +#define CYBSP_QSPI_ENABLED 1U +#define CYBSP_QSPI_HW SMIF0 +#define CYBSP_QSPI_IRQ smif_interrupt_IRQn +#define CYBSP_QSPI_MEMORY_MODE_ALIGMENT_ERROR (0UL) +#define CYBSP_QSPI_RX_DATA_FIFO_UNDERFLOW (0UL) +#define CYBSP_QSPI_TX_COMMAND_FIFO_OVERFLOW (0UL) +#define CYBSP_QSPI_TX_DATA_FIFO_OVERFLOW (0UL) +#define CYBSP_QSPI_RX_FIFO_TRIGEER_LEVEL (0UL) +#define CYBSP_QSPI_TX_FIFO_TRIGEER_LEVEL (0UL) +#define CYBSP_QSPI_DATALINES0_1 (1UL) +#define CYBSP_QSPI_DATALINES2_3 (1UL) +#define CYBSP_QSPI_DATALINES4_5 (0UL) +#define CYBSP_QSPI_DATALINES6_7 (0UL) +#define CYBSP_QSPI_SS0 (1UL) +#define CYBSP_QSPI_SS1 (0UL) +#define CYBSP_QSPI_SS2 (0UL) +#define CYBSP_QSPI_SS3 (0UL) +#define CYBSP_QSPI_DESELECT_DELAY 7 +#define CYBSP_MCWDT0_ENABLED 1U +#define CYBSP_MCWDT0_HW MCWDT_STRUCT0 +#define CYBSP_RTC_ENABLED 1U +#define CYBSP_RTC_10_MONTH_OFFSET (28U) +#define CYBSP_RTC_MONTH_OFFSET (24U) +#define CYBSP_RTC_10_DAY_OFFSET (20U) +#define CYBSP_RTC_DAY_OFFSET (16U) +#define CYBSP_RTC_1000_YEAR_OFFSET (12U) +#define CYBSP_RTC_100_YEAR_OFFSET (8U) +#define CYBSP_RTC_10_YEAR_OFFSET (4U) +#define CYBSP_RTC_YEAR_OFFSET (0U) +#define CYBSP_USBUART_ENABLED 1U +#define CYBSP_USBUART_ACTIVE_ENDPOINTS_MASK 0U +#define CYBSP_USBUART_ENDPOINTS_BUFFER_SIZE 512U +#define CYBSP_USBUART_ENDPOINTS_ACCESS_TYPE 0U +#define CYBSP_USBUART_HW USBFS0 +#define CYBSP_USBUART_HI_IRQ usb_interrupt_hi_IRQn +#define CYBSP_USBUART_MED_IRQ usb_interrupt_med_IRQn +#define CYBSP_USBUART_LO_IRQ usb_interrupt_lo_IRQn + +extern cy_stc_csd_context_t cy_csd_0_context; +extern const cy_stc_scb_uart_config_t CYBSP_BT_UART_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_UART_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_scb_ezi2c_config_t CYBSP_CSD_COMM_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_COMM_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_smif_config_t CYBSP_QSPI_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_mcwdt_config_t CYBSP_MCWDT0_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_MCWDT0_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_rtc_config_t CYBSP_RTC_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_RTC_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_usbfs_dev_drv_config_t CYBSP_USBUART_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_USBUART_obj; +#endif //defined (CY_USING_HAL) + +void init_cycfg_peripherals(void); + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_PERIPHERALS_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_pins.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_pins.c new file mode 100644 index 0000000000..7daee6bb07 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_pins.c @@ -0,0 +1,1005 @@ +/******************************************************************************* +* File Name: cycfg_pins.c +* +* Description: +* Pin configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_pins.h" + +const cy_stc_gpio_pin_config_t CYBSP_WCO_IN_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_WCO_IN_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_WCO_IN_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_WCO_IN_PORT_NUM, + .channel_num = CYBSP_WCO_IN_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_WCO_OUT_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_WCO_OUT_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_WCO_OUT_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_WCO_OUT_PORT_NUM, + .channel_num = CYBSP_WCO_OUT_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_QSPI_SS_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG_IN_OFF, + .hsiom = CYBSP_QSPI_SS_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_SS_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_QSPI_SS_PORT_NUM, + .channel_num = CYBSP_QSPI_SS_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_QSPI_D3_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG, + .hsiom = CYBSP_QSPI_D3_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_D3_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_QSPI_D3_PORT_NUM, + .channel_num = CYBSP_QSPI_D3_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_QSPI_D2_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG, + .hsiom = CYBSP_QSPI_D2_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_D2_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_QSPI_D2_PORT_NUM, + .channel_num = CYBSP_QSPI_D2_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_QSPI_D1_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG, + .hsiom = CYBSP_QSPI_D1_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_D1_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_QSPI_D1_PORT_NUM, + .channel_num = CYBSP_QSPI_D1_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_QSPI_D0_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG, + .hsiom = CYBSP_QSPI_D0_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_D0_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_QSPI_D0_PORT_NUM, + .channel_num = CYBSP_QSPI_D0_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_QSPI_SCK_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG_IN_OFF, + .hsiom = CYBSP_QSPI_SCK_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_QSPI_SCK_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_QSPI_SCK_PORT_NUM, + .channel_num = CYBSP_QSPI_SCK_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_USB_DP_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_USB_DP_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_USB_DP_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_USB_DP_PORT_NUM, + .channel_num = CYBSP_USB_DP_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_USB_DM_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_USB_DM_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_USB_DM_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_USB_DM_PORT_NUM, + .channel_num = CYBSP_USB_DM_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_TX_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_TX_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_TX_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_TX_PORT_NUM, + .channel_num = CYBSP_CSD_TX_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_WIFI_HOST_WAKE_config = +{ + .outVal = 0, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_WIFI_HOST_WAKE_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_WIFI_HOST_WAKE_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_WIFI_HOST_WAKE_PORT_NUM, + .channel_num = CYBSP_WIFI_HOST_WAKE_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_UART_RX_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_HIGHZ, + .hsiom = CYBSP_BT_UART_RX_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_UART_RX_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_UART_RX_PORT_NUM, + .channel_num = CYBSP_BT_UART_RX_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_UART_TX_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG_IN_OFF, + .hsiom = CYBSP_BT_UART_TX_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_UART_TX_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_UART_TX_PORT_NUM, + .channel_num = CYBSP_BT_UART_TX_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_UART_RTS_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG_IN_OFF, + .hsiom = CYBSP_BT_UART_RTS_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_UART_RTS_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_UART_RTS_PORT_NUM, + .channel_num = CYBSP_BT_UART_RTS_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_UART_CTS_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_HIGHZ, + .hsiom = CYBSP_BT_UART_CTS_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_UART_CTS_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_UART_CTS_PORT_NUM, + .channel_num = CYBSP_BT_UART_CTS_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_POWER_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_OD_DRIVESHIGH_IN_OFF, + .hsiom = CYBSP_BT_POWER_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_POWER_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_POWER_PORT_NUM, + .channel_num = CYBSP_BT_POWER_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_HOST_WAKE_config = +{ + .outVal = 0, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_BT_HOST_WAKE_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_HOST_WAKE_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_HOST_WAKE_PORT_NUM, + .channel_num = CYBSP_BT_HOST_WAKE_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_BT_DEVICE_WAKE_config = +{ + .outVal = 0, + .driveMode = CY_GPIO_DM_STRONG_IN_OFF, + .hsiom = CYBSP_BT_DEVICE_WAKE_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_BT_DEVICE_WAKE_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_BT_DEVICE_WAKE_PORT_NUM, + .channel_num = CYBSP_BT_DEVICE_WAKE_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_EZI2C_SCL_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_OD_DRIVESLOW, + .hsiom = CYBSP_EZI2C_SCL_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_EZI2C_SCL_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_EZI2C_SCL_PORT_NUM, + .channel_num = CYBSP_EZI2C_SCL_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_EZI2C_SDA_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_OD_DRIVESLOW, + .hsiom = CYBSP_EZI2C_SDA_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_EZI2C_SDA_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_EZI2C_SDA_PORT_NUM, + .channel_num = CYBSP_EZI2C_SDA_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_SWO_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_STRONG_IN_OFF, + .hsiom = CYBSP_SWO_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_SWO_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_SWO_PORT_NUM, + .channel_num = CYBSP_SWO_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_SWDIO_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_PULLUP, + .hsiom = CYBSP_SWDIO_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_SWDIO_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_SWDIO_PORT_NUM, + .channel_num = CYBSP_SWDIO_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_SWDCK_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_PULLDOWN, + .hsiom = CYBSP_SWDCK_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_SWDCK_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_SWDCK_PORT_NUM, + .channel_num = CYBSP_SWDCK_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CINA_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CINA_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CINA_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CINA_PORT_NUM, + .channel_num = CYBSP_CINA_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CINB_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CINB_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CINB_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CINB_PORT_NUM, + .channel_num = CYBSP_CINB_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CMOD_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CMOD_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CMOD_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CMOD_PORT_NUM, + .channel_num = CYBSP_CMOD_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_BTN0_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_BTN0_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_BTN0_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_BTN0_PORT_NUM, + .channel_num = CYBSP_CSD_BTN0_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_BTN1_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_BTN1_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_BTN1_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_BTN1_PORT_NUM, + .channel_num = CYBSP_CSD_BTN1_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD0_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_SLD0_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_SLD0_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_SLD0_PORT_NUM, + .channel_num = CYBSP_CSD_SLD0_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD1_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_SLD1_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_SLD1_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_SLD1_PORT_NUM, + .channel_num = CYBSP_CSD_SLD1_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD2_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_SLD2_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_SLD2_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_SLD2_PORT_NUM, + .channel_num = CYBSP_CSD_SLD2_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD3_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_SLD3_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_SLD3_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_SLD3_PORT_NUM, + .channel_num = CYBSP_CSD_SLD3_PIN, + }; +#endif //defined (CY_USING_HAL) +const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD4_config = +{ + .outVal = 1, + .driveMode = CY_GPIO_DM_ANALOG, + .hsiom = CYBSP_CSD_SLD4_HSIOM, + .intEdge = CY_GPIO_INTR_DISABLE, + .intMask = 0UL, + .vtrip = CY_GPIO_VTRIP_CMOS, + .slewRate = CY_GPIO_SLEW_FAST, + .driveSel = CY_GPIO_DRIVE_1_2, + .vregEn = 0UL, + .ibufMode = 0UL, + .vtripSel = 0UL, + .vrefSel = 0UL, + .vohSel = 0UL, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t CYBSP_CSD_SLD4_obj = + { + .type = CYHAL_RSC_GPIO, + .block_num = CYBSP_CSD_SLD4_PORT_NUM, + .channel_num = CYBSP_CSD_SLD4_PIN, + }; +#endif //defined (CY_USING_HAL) + + +void init_cycfg_pins(void) +{ + Cy_GPIO_Pin_Init(CYBSP_WCO_IN_PORT, CYBSP_WCO_IN_PIN, &CYBSP_WCO_IN_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_WCO_IN_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_WCO_OUT_PORT, CYBSP_WCO_OUT_PIN, &CYBSP_WCO_OUT_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_WCO_OUT_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_QSPI_SS_PORT, CYBSP_QSPI_SS_PIN, &CYBSP_QSPI_SS_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_SS_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_QSPI_D3_PORT, CYBSP_QSPI_D3_PIN, &CYBSP_QSPI_D3_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_D3_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_QSPI_D2_PORT, CYBSP_QSPI_D2_PIN, &CYBSP_QSPI_D2_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_D2_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_QSPI_D1_PORT, CYBSP_QSPI_D1_PIN, &CYBSP_QSPI_D1_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_D1_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_QSPI_D0_PORT, CYBSP_QSPI_D0_PIN, &CYBSP_QSPI_D0_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_D0_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_QSPI_SCK_PORT, CYBSP_QSPI_SCK_PIN, &CYBSP_QSPI_SCK_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_QSPI_SCK_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_USB_DP_PORT, CYBSP_USB_DP_PIN, &CYBSP_USB_DP_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_USB_DP_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_USB_DM_PORT, CYBSP_USB_DM_PIN, &CYBSP_USB_DM_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_USB_DM_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_TX_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_WIFI_HOST_WAKE_PORT, CYBSP_WIFI_HOST_WAKE_PIN, &CYBSP_WIFI_HOST_WAKE_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_WIFI_HOST_WAKE_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_UART_RX_PORT, CYBSP_BT_UART_RX_PIN, &CYBSP_BT_UART_RX_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_UART_RX_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_UART_TX_PORT, CYBSP_BT_UART_TX_PIN, &CYBSP_BT_UART_TX_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_UART_TX_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_UART_RTS_PORT, CYBSP_BT_UART_RTS_PIN, &CYBSP_BT_UART_RTS_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_UART_RTS_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_UART_CTS_PORT, CYBSP_BT_UART_CTS_PIN, &CYBSP_BT_UART_CTS_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_UART_CTS_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_POWER_PORT, CYBSP_BT_POWER_PIN, &CYBSP_BT_POWER_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_POWER_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_HOST_WAKE_PORT, CYBSP_BT_HOST_WAKE_PIN, &CYBSP_BT_HOST_WAKE_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_HOST_WAKE_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_BT_DEVICE_WAKE_PORT, CYBSP_BT_DEVICE_WAKE_PIN, &CYBSP_BT_DEVICE_WAKE_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_BT_DEVICE_WAKE_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_EZI2C_SCL_PORT, CYBSP_EZI2C_SCL_PIN, &CYBSP_EZI2C_SCL_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_EZI2C_SCL_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_EZI2C_SDA_PORT, CYBSP_EZI2C_SDA_PIN, &CYBSP_EZI2C_SDA_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_EZI2C_SDA_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_SWO_PORT, CYBSP_SWO_PIN, &CYBSP_SWO_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_SWO_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_SWDIO_PORT, CYBSP_SWDIO_PIN, &CYBSP_SWDIO_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_SWDIO_obj); +#endif //defined (CY_USING_HAL) + + Cy_GPIO_Pin_Init(CYBSP_SWDCK_PORT, CYBSP_SWDCK_PIN, &CYBSP_SWDCK_config); +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_SWDCK_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CINA_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CINB_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CMOD_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_BTN0_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_BTN1_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_SLD0_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_SLD1_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_SLD2_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_SLD3_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&CYBSP_CSD_SLD4_obj); +#endif //defined (CY_USING_HAL) +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_pins.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_pins.h new file mode 100644 index 0000000000..95f624c7a5 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_pins.h @@ -0,0 +1,1000 @@ +/******************************************************************************* +* File Name: cycfg_pins.h +* +* Description: +* Pin configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_PINS_H) +#define CYCFG_PINS_H + +#include "cycfg_notices.h" +#include "cy_gpio.h" +#if defined (CY_USING_HAL) + #include "cyhal_hwmgr.h" +#endif //defined (CY_USING_HAL) +#include "cycfg_routing.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +#define CYBSP_WCO_IN_ENABLED 1U +#define CYBSP_WCO_IN_PORT GPIO_PRT0 +#define CYBSP_WCO_IN_PORT_NUM 0U +#define CYBSP_WCO_IN_PIN 0U +#define CYBSP_WCO_IN_NUM 0U +#define CYBSP_WCO_IN_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_WCO_IN_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_0_pin_0_HSIOM + #define ioss_0_port_0_pin_0_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_WCO_IN_HSIOM ioss_0_port_0_pin_0_HSIOM +#define CYBSP_WCO_IN_IRQ ioss_interrupts_gpio_0_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_WCO_IN_HAL_PORT_PIN P0_0 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WCO_IN_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WCO_IN_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WCO_IN_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_WCO_OUT_ENABLED 1U +#define CYBSP_WCO_OUT_PORT GPIO_PRT0 +#define CYBSP_WCO_OUT_PORT_NUM 0U +#define CYBSP_WCO_OUT_PIN 1U +#define CYBSP_WCO_OUT_NUM 1U +#define CYBSP_WCO_OUT_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_WCO_OUT_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_0_pin_1_HSIOM + #define ioss_0_port_0_pin_1_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_WCO_OUT_HSIOM ioss_0_port_0_pin_1_HSIOM +#define CYBSP_WCO_OUT_IRQ ioss_interrupts_gpio_0_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_WCO_OUT_HAL_PORT_PIN P0_1 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WCO_OUT_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WCO_OUT_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WCO_OUT_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_QSPI_SS_ENABLED 1U +#define CYBSP_QSPI_SS_PORT GPIO_PRT11 +#define CYBSP_QSPI_SS_PORT_NUM 11U +#define CYBSP_QSPI_SS_PIN 2U +#define CYBSP_QSPI_SS_NUM 2U +#define CYBSP_QSPI_SS_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF +#define CYBSP_QSPI_SS_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_11_pin_2_HSIOM + #define ioss_0_port_11_pin_2_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_QSPI_SS_HSIOM ioss_0_port_11_pin_2_HSIOM +#define CYBSP_QSPI_SS_IRQ ioss_interrupts_gpio_11_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SS_HAL_PORT_PIN P11_2 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SS_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SS_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SS_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_QSPI_D3_ENABLED 1U +#define CYBSP_QSPI_D3_PORT GPIO_PRT11 +#define CYBSP_QSPI_D3_PORT_NUM 11U +#define CYBSP_QSPI_D3_PIN 3U +#define CYBSP_QSPI_D3_NUM 3U +#define CYBSP_QSPI_D3_DRIVEMODE CY_GPIO_DM_STRONG +#define CYBSP_QSPI_D3_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_11_pin_3_HSIOM + #define ioss_0_port_11_pin_3_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_QSPI_D3_HSIOM ioss_0_port_11_pin_3_HSIOM +#define CYBSP_QSPI_D3_IRQ ioss_interrupts_gpio_11_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D3_HAL_PORT_PIN P11_3 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D3_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D3_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D3_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_QSPI_D2_ENABLED 1U +#define CYBSP_QSPI_D2_PORT GPIO_PRT11 +#define CYBSP_QSPI_D2_PORT_NUM 11U +#define CYBSP_QSPI_D2_PIN 4U +#define CYBSP_QSPI_D2_NUM 4U +#define CYBSP_QSPI_D2_DRIVEMODE CY_GPIO_DM_STRONG +#define CYBSP_QSPI_D2_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_11_pin_4_HSIOM + #define ioss_0_port_11_pin_4_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_QSPI_D2_HSIOM ioss_0_port_11_pin_4_HSIOM +#define CYBSP_QSPI_D2_IRQ ioss_interrupts_gpio_11_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D2_HAL_PORT_PIN P11_4 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D2_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D2_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D2_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_QSPI_D1_ENABLED 1U +#define CYBSP_QSPI_D1_PORT GPIO_PRT11 +#define CYBSP_QSPI_D1_PORT_NUM 11U +#define CYBSP_QSPI_D1_PIN 5U +#define CYBSP_QSPI_D1_NUM 5U +#define CYBSP_QSPI_D1_DRIVEMODE CY_GPIO_DM_STRONG +#define CYBSP_QSPI_D1_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_11_pin_5_HSIOM + #define ioss_0_port_11_pin_5_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_QSPI_D1_HSIOM ioss_0_port_11_pin_5_HSIOM +#define CYBSP_QSPI_D1_IRQ ioss_interrupts_gpio_11_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D1_HAL_PORT_PIN P11_5 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D1_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D1_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D1_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_QSPI_D0_ENABLED 1U +#define CYBSP_QSPI_D0_PORT GPIO_PRT11 +#define CYBSP_QSPI_D0_PORT_NUM 11U +#define CYBSP_QSPI_D0_PIN 6U +#define CYBSP_QSPI_D0_NUM 6U +#define CYBSP_QSPI_D0_DRIVEMODE CY_GPIO_DM_STRONG +#define CYBSP_QSPI_D0_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_11_pin_6_HSIOM + #define ioss_0_port_11_pin_6_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_QSPI_D0_HSIOM ioss_0_port_11_pin_6_HSIOM +#define CYBSP_QSPI_D0_IRQ ioss_interrupts_gpio_11_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D0_HAL_PORT_PIN P11_6 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D0_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D0_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_D0_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_QSPI_SCK_ENABLED 1U +#define CYBSP_QSPI_SCK_PORT GPIO_PRT11 +#define CYBSP_QSPI_SCK_PORT_NUM 11U +#define CYBSP_QSPI_SCK_PIN 7U +#define CYBSP_QSPI_SCK_NUM 7U +#define CYBSP_QSPI_SCK_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF +#define CYBSP_QSPI_SCK_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_11_pin_7_HSIOM + #define ioss_0_port_11_pin_7_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_QSPI_SCK_HSIOM ioss_0_port_11_pin_7_HSIOM +#define CYBSP_QSPI_SCK_IRQ ioss_interrupts_gpio_11_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SCK_HAL_PORT_PIN P11_7 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SCK_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SCK_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_QSPI_SCK_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_USB_DP_ENABLED 1U +#define CYBSP_USB_DP_PORT GPIO_PRT14 +#define CYBSP_USB_DP_PORT_NUM 14U +#define CYBSP_USB_DP_PIN 0U +#define CYBSP_USB_DP_NUM 0U +#define CYBSP_USB_DP_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_USB_DP_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_14_pin_0_HSIOM + #define ioss_0_port_14_pin_0_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_USB_DP_HSIOM ioss_0_port_14_pin_0_HSIOM +#define CYBSP_USB_DP_IRQ ioss_interrupts_gpio_14_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_USB_DP_HAL_PORT_PIN P14_0 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_USB_DP_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_USB_DP_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_USB_DP_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_USB_DM_ENABLED 1U +#define CYBSP_USB_DM_PORT GPIO_PRT14 +#define CYBSP_USB_DM_PORT_NUM 14U +#define CYBSP_USB_DM_PIN 1U +#define CYBSP_USB_DM_NUM 1U +#define CYBSP_USB_DM_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_USB_DM_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_14_pin_1_HSIOM + #define ioss_0_port_14_pin_1_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_USB_DM_HSIOM ioss_0_port_14_pin_1_HSIOM +#define CYBSP_USB_DM_IRQ ioss_interrupts_gpio_14_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_USB_DM_HAL_PORT_PIN P14_1 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_USB_DM_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_USB_DM_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_USB_DM_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_TX_ENABLED 1U +#define CYBSP_CSD_TX_PORT GPIO_PRT1 +#define CYBSP_CSD_TX_PORT_NUM 1U +#define CYBSP_CSD_TX_PIN 0U +#define CYBSP_CSD_TX_NUM 0U +#define CYBSP_CSD_TX_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_TX_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_1_pin_0_HSIOM + #define ioss_0_port_1_pin_0_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_TX_HSIOM ioss_0_port_1_pin_0_HSIOM +#define CYBSP_CSD_TX_IRQ ioss_interrupts_gpio_1_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_TX_HAL_PORT_PIN P1_0 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_TX_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_TX_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_TX_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_WIFI_HOST_WAKE_ENABLED 1U +#define CYBSP_WIFI_HOST_WAKE_PORT GPIO_PRT2 +#define CYBSP_WIFI_HOST_WAKE_PORT_NUM 2U +#define CYBSP_WIFI_HOST_WAKE_PIN 7U +#define CYBSP_WIFI_HOST_WAKE_NUM 7U +#define CYBSP_WIFI_HOST_WAKE_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_WIFI_HOST_WAKE_INIT_DRIVESTATE 0 +#ifndef ioss_0_port_2_pin_7_HSIOM + #define ioss_0_port_2_pin_7_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_WIFI_HOST_WAKE_HSIOM ioss_0_port_2_pin_7_HSIOM +#define CYBSP_WIFI_HOST_WAKE_IRQ ioss_interrupts_gpio_2_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_WIFI_HOST_WAKE_HAL_PORT_PIN P2_7 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WIFI_HOST_WAKE_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WIFI_HOST_WAKE_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_WIFI_HOST_WAKE_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_UART_RX_ENABLED 1U +#define CYBSP_BT_UART_RX_PORT GPIO_PRT3 +#define CYBSP_BT_UART_RX_PORT_NUM 3U +#define CYBSP_BT_UART_RX_PIN 0U +#define CYBSP_BT_UART_RX_NUM 0U +#define CYBSP_BT_UART_RX_DRIVEMODE CY_GPIO_DM_HIGHZ +#define CYBSP_BT_UART_RX_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_3_pin_0_HSIOM + #define ioss_0_port_3_pin_0_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_UART_RX_HSIOM ioss_0_port_3_pin_0_HSIOM +#define CYBSP_BT_UART_RX_IRQ ioss_interrupts_gpio_3_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RX_HAL_PORT_PIN P3_0 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RX_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RX_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RX_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_NONE +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_UART_TX_ENABLED 1U +#define CYBSP_BT_UART_TX_PORT GPIO_PRT3 +#define CYBSP_BT_UART_TX_PORT_NUM 3U +#define CYBSP_BT_UART_TX_PIN 1U +#define CYBSP_BT_UART_TX_NUM 1U +#define CYBSP_BT_UART_TX_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF +#define CYBSP_BT_UART_TX_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_3_pin_1_HSIOM + #define ioss_0_port_3_pin_1_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_UART_TX_HSIOM ioss_0_port_3_pin_1_HSIOM +#define CYBSP_BT_UART_TX_IRQ ioss_interrupts_gpio_3_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_TX_HAL_PORT_PIN P3_1 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_TX_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_TX_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_TX_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_UART_RTS_ENABLED 1U +#define CYBSP_BT_UART_RTS_PORT GPIO_PRT3 +#define CYBSP_BT_UART_RTS_PORT_NUM 3U +#define CYBSP_BT_UART_RTS_PIN 2U +#define CYBSP_BT_UART_RTS_NUM 2U +#define CYBSP_BT_UART_RTS_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF +#define CYBSP_BT_UART_RTS_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_3_pin_2_HSIOM + #define ioss_0_port_3_pin_2_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_UART_RTS_HSIOM ioss_0_port_3_pin_2_HSIOM +#define CYBSP_BT_UART_RTS_IRQ ioss_interrupts_gpio_3_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RTS_HAL_PORT_PIN P3_2 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RTS_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RTS_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_RTS_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_UART_CTS_ENABLED 1U +#define CYBSP_BT_UART_CTS_PORT GPIO_PRT3 +#define CYBSP_BT_UART_CTS_PORT_NUM 3U +#define CYBSP_BT_UART_CTS_PIN 3U +#define CYBSP_BT_UART_CTS_NUM 3U +#define CYBSP_BT_UART_CTS_DRIVEMODE CY_GPIO_DM_HIGHZ +#define CYBSP_BT_UART_CTS_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_3_pin_3_HSIOM + #define ioss_0_port_3_pin_3_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_UART_CTS_HSIOM ioss_0_port_3_pin_3_HSIOM +#define CYBSP_BT_UART_CTS_IRQ ioss_interrupts_gpio_3_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_CTS_HAL_PORT_PIN P3_3 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_CTS_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_CTS_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_UART_CTS_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_NONE +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_POWER_ENABLED 1U +#define CYBSP_BT_POWER_PORT GPIO_PRT3 +#define CYBSP_BT_POWER_PORT_NUM 3U +#define CYBSP_BT_POWER_PIN 4U +#define CYBSP_BT_POWER_NUM 4U +#define CYBSP_BT_POWER_DRIVEMODE CY_GPIO_DM_OD_DRIVESHIGH_IN_OFF +#define CYBSP_BT_POWER_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_3_pin_4_HSIOM + #define ioss_0_port_3_pin_4_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_POWER_HSIOM ioss_0_port_3_pin_4_HSIOM +#define CYBSP_BT_POWER_IRQ ioss_interrupts_gpio_3_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_POWER_HAL_PORT_PIN P3_4 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_POWER_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_POWER_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_POWER_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_OPENDRAINDRIVESHIGH +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_HOST_WAKE_ENABLED 1U +#define CYBSP_BT_HOST_WAKE_PORT GPIO_PRT3 +#define CYBSP_BT_HOST_WAKE_PORT_NUM 3U +#define CYBSP_BT_HOST_WAKE_PIN 5U +#define CYBSP_BT_HOST_WAKE_NUM 5U +#define CYBSP_BT_HOST_WAKE_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_BT_HOST_WAKE_INIT_DRIVESTATE 0 +#ifndef ioss_0_port_3_pin_5_HSIOM + #define ioss_0_port_3_pin_5_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_HOST_WAKE_HSIOM ioss_0_port_3_pin_5_HSIOM +#define CYBSP_BT_HOST_WAKE_IRQ ioss_interrupts_gpio_3_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_HOST_WAKE_HAL_PORT_PIN P3_5 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_HOST_WAKE_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_HOST_WAKE_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_HOST_WAKE_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_BT_DEVICE_WAKE_ENABLED 1U +#define CYBSP_BT_DEVICE_WAKE_PORT GPIO_PRT4 +#define CYBSP_BT_DEVICE_WAKE_PORT_NUM 4U +#define CYBSP_BT_DEVICE_WAKE_PIN 0U +#define CYBSP_BT_DEVICE_WAKE_NUM 0U +#define CYBSP_BT_DEVICE_WAKE_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF +#define CYBSP_BT_DEVICE_WAKE_INIT_DRIVESTATE 0 +#ifndef ioss_0_port_4_pin_0_HSIOM + #define ioss_0_port_4_pin_0_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_BT_DEVICE_WAKE_HSIOM ioss_0_port_4_pin_0_HSIOM +#define CYBSP_BT_DEVICE_WAKE_IRQ ioss_interrupts_gpio_4_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_BT_DEVICE_WAKE_HAL_PORT_PIN P4_0 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_DEVICE_WAKE_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_DEVICE_WAKE_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_BT_DEVICE_WAKE_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_EZI2C_SCL_ENABLED 1U +#define CYBSP_EZI2C_SCL_PORT GPIO_PRT6 +#define CYBSP_EZI2C_SCL_PORT_NUM 6U +#define CYBSP_EZI2C_SCL_PIN 0U +#define CYBSP_EZI2C_SCL_NUM 0U +#define CYBSP_EZI2C_SCL_DRIVEMODE CY_GPIO_DM_OD_DRIVESLOW +#define CYBSP_EZI2C_SCL_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_6_pin_0_HSIOM + #define ioss_0_port_6_pin_0_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_EZI2C_SCL_HSIOM ioss_0_port_6_pin_0_HSIOM +#define CYBSP_EZI2C_SCL_IRQ ioss_interrupts_gpio_6_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SCL_HAL_PORT_PIN P6_0 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SCL_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SCL_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SCL_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_OPENDRAINDRIVESLOW +#endif //defined (CY_USING_HAL) +#define CYBSP_EZI2C_SDA_ENABLED 1U +#define CYBSP_EZI2C_SDA_PORT GPIO_PRT6 +#define CYBSP_EZI2C_SDA_PORT_NUM 6U +#define CYBSP_EZI2C_SDA_PIN 1U +#define CYBSP_EZI2C_SDA_NUM 1U +#define CYBSP_EZI2C_SDA_DRIVEMODE CY_GPIO_DM_OD_DRIVESLOW +#define CYBSP_EZI2C_SDA_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_6_pin_1_HSIOM + #define ioss_0_port_6_pin_1_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_EZI2C_SDA_HSIOM ioss_0_port_6_pin_1_HSIOM +#define CYBSP_EZI2C_SDA_IRQ ioss_interrupts_gpio_6_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SDA_HAL_PORT_PIN P6_1 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SDA_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SDA_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_EZI2C_SDA_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_OPENDRAINDRIVESLOW +#endif //defined (CY_USING_HAL) +#define CYBSP_SWO_ENABLED 1U +#define CYBSP_SWO_PORT GPIO_PRT6 +#define CYBSP_SWO_PORT_NUM 6U +#define CYBSP_SWO_PIN 4U +#define CYBSP_SWO_NUM 4U +#define CYBSP_SWO_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF +#define CYBSP_SWO_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_6_pin_4_HSIOM + #define ioss_0_port_6_pin_4_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_SWO_HSIOM ioss_0_port_6_pin_4_HSIOM +#define CYBSP_SWO_IRQ ioss_interrupts_gpio_6_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_SWO_HAL_PORT_PIN P6_4 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWO_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWO_HAL_DIR CYHAL_GPIO_DIR_OUTPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWO_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG +#endif //defined (CY_USING_HAL) +#define CYBSP_SWDIO_ENABLED 1U +#define CYBSP_SWDIO_PORT GPIO_PRT6 +#define CYBSP_SWDIO_PORT_NUM 6U +#define CYBSP_SWDIO_PIN 6U +#define CYBSP_SWDIO_NUM 6U +#define CYBSP_SWDIO_DRIVEMODE CY_GPIO_DM_PULLUP +#define CYBSP_SWDIO_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_6_pin_6_HSIOM + #define ioss_0_port_6_pin_6_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_SWDIO_HSIOM ioss_0_port_6_pin_6_HSIOM +#define CYBSP_SWDIO_IRQ ioss_interrupts_gpio_6_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_SWDIO_HAL_PORT_PIN P6_6 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWDIO_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWDIO_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWDIO_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_PULLUP +#endif //defined (CY_USING_HAL) +#define CYBSP_SWDCK_ENABLED 1U +#define CYBSP_SWDCK_PORT GPIO_PRT6 +#define CYBSP_SWDCK_PORT_NUM 6U +#define CYBSP_SWDCK_PIN 7U +#define CYBSP_SWDCK_NUM 7U +#define CYBSP_SWDCK_DRIVEMODE CY_GPIO_DM_PULLDOWN +#define CYBSP_SWDCK_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_6_pin_7_HSIOM + #define ioss_0_port_6_pin_7_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_SWDCK_HSIOM ioss_0_port_6_pin_7_HSIOM +#define CYBSP_SWDCK_IRQ ioss_interrupts_gpio_6_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_SWDCK_HAL_PORT_PIN P6_7 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWDCK_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWDCK_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_SWDCK_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_PULLDOWN +#endif //defined (CY_USING_HAL) +#define CYBSP_CINA_ENABLED 1U +#define CYBSP_CINA_PORT GPIO_PRT7 +#define CYBSP_CINA_PORT_NUM 7U +#define CYBSP_CINA_PIN 1U +#define CYBSP_CINA_NUM 1U +#define CYBSP_CINA_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CINA_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_7_pin_1_HSIOM + #define ioss_0_port_7_pin_1_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CINA_HSIOM ioss_0_port_7_pin_1_HSIOM +#define CYBSP_CINA_IRQ ioss_interrupts_gpio_7_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CINA_HAL_PORT_PIN P7_1 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CINA_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CINA_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CINA_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CINB_ENABLED 1U +#define CYBSP_CINB_PORT GPIO_PRT7 +#define CYBSP_CINB_PORT_NUM 7U +#define CYBSP_CINB_PIN 2U +#define CYBSP_CINB_NUM 2U +#define CYBSP_CINB_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CINB_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_7_pin_2_HSIOM + #define ioss_0_port_7_pin_2_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CINB_HSIOM ioss_0_port_7_pin_2_HSIOM +#define CYBSP_CINB_IRQ ioss_interrupts_gpio_7_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CINB_HAL_PORT_PIN P7_2 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CINB_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CINB_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CINB_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CMOD_ENABLED 1U +#define CYBSP_CMOD_PORT GPIO_PRT7 +#define CYBSP_CMOD_PORT_NUM 7U +#define CYBSP_CMOD_PIN 7U +#define CYBSP_CMOD_NUM 7U +#define CYBSP_CMOD_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CMOD_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_7_pin_7_HSIOM + #define ioss_0_port_7_pin_7_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CMOD_HSIOM ioss_0_port_7_pin_7_HSIOM +#define CYBSP_CMOD_IRQ ioss_interrupts_gpio_7_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CMOD_HAL_PORT_PIN P7_7 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CMOD_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CMOD_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CMOD_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_BTN0_ENABLED 1U +#define CYBSP_CSD_BTN0_PORT GPIO_PRT8 +#define CYBSP_CSD_BTN0_PORT_NUM 8U +#define CYBSP_CSD_BTN0_PIN 1U +#define CYBSP_CSD_BTN0_NUM 1U +#define CYBSP_CSD_BTN0_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_BTN0_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_1_HSIOM + #define ioss_0_port_8_pin_1_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_BTN0_HSIOM ioss_0_port_8_pin_1_HSIOM +#define CYBSP_CSD_BTN0_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN0_HAL_PORT_PIN P8_1 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN0_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN0_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN0_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_BTN1_ENABLED 1U +#define CYBSP_CSD_BTN1_PORT GPIO_PRT8 +#define CYBSP_CSD_BTN1_PORT_NUM 8U +#define CYBSP_CSD_BTN1_PIN 2U +#define CYBSP_CSD_BTN1_NUM 2U +#define CYBSP_CSD_BTN1_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_BTN1_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_2_HSIOM + #define ioss_0_port_8_pin_2_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_BTN1_HSIOM ioss_0_port_8_pin_2_HSIOM +#define CYBSP_CSD_BTN1_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN1_HAL_PORT_PIN P8_2 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN1_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN1_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_BTN1_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_SLD0_ENABLED 1U +#define CYBSP_CSD_SLD0_PORT GPIO_PRT8 +#define CYBSP_CSD_SLD0_PORT_NUM 8U +#define CYBSP_CSD_SLD0_PIN 3U +#define CYBSP_CSD_SLD0_NUM 3U +#define CYBSP_CSD_SLD0_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_SLD0_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_3_HSIOM + #define ioss_0_port_8_pin_3_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_SLD0_HSIOM ioss_0_port_8_pin_3_HSIOM +#define CYBSP_CSD_SLD0_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD0_HAL_PORT_PIN P8_3 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD0_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD0_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD0_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_SLD1_ENABLED 1U +#define CYBSP_CSD_SLD1_PORT GPIO_PRT8 +#define CYBSP_CSD_SLD1_PORT_NUM 8U +#define CYBSP_CSD_SLD1_PIN 4U +#define CYBSP_CSD_SLD1_NUM 4U +#define CYBSP_CSD_SLD1_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_SLD1_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_4_HSIOM + #define ioss_0_port_8_pin_4_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_SLD1_HSIOM ioss_0_port_8_pin_4_HSIOM +#define CYBSP_CSD_SLD1_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD1_HAL_PORT_PIN P8_4 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD1_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD1_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD1_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_SLD2_ENABLED 1U +#define CYBSP_CSD_SLD2_PORT GPIO_PRT8 +#define CYBSP_CSD_SLD2_PORT_NUM 8U +#define CYBSP_CSD_SLD2_PIN 5U +#define CYBSP_CSD_SLD2_NUM 5U +#define CYBSP_CSD_SLD2_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_SLD2_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_5_HSIOM + #define ioss_0_port_8_pin_5_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_SLD2_HSIOM ioss_0_port_8_pin_5_HSIOM +#define CYBSP_CSD_SLD2_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD2_HAL_PORT_PIN P8_5 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD2_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD2_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD2_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_SLD3_ENABLED 1U +#define CYBSP_CSD_SLD3_PORT GPIO_PRT8 +#define CYBSP_CSD_SLD3_PORT_NUM 8U +#define CYBSP_CSD_SLD3_PIN 6U +#define CYBSP_CSD_SLD3_NUM 6U +#define CYBSP_CSD_SLD3_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_SLD3_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_6_HSIOM + #define ioss_0_port_8_pin_6_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_SLD3_HSIOM ioss_0_port_8_pin_6_HSIOM +#define CYBSP_CSD_SLD3_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD3_HAL_PORT_PIN P8_6 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD3_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD3_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD3_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) +#define CYBSP_CSD_SLD4_ENABLED 1U +#define CYBSP_CSD_SLD4_PORT GPIO_PRT8 +#define CYBSP_CSD_SLD4_PORT_NUM 8U +#define CYBSP_CSD_SLD4_PIN 7U +#define CYBSP_CSD_SLD4_NUM 7U +#define CYBSP_CSD_SLD4_DRIVEMODE CY_GPIO_DM_ANALOG +#define CYBSP_CSD_SLD4_INIT_DRIVESTATE 1 +#ifndef ioss_0_port_8_pin_7_HSIOM + #define ioss_0_port_8_pin_7_HSIOM HSIOM_SEL_GPIO +#endif +#define CYBSP_CSD_SLD4_HSIOM ioss_0_port_8_pin_7_HSIOM +#define CYBSP_CSD_SLD4_IRQ ioss_interrupts_gpio_8_IRQn +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD4_HAL_PORT_PIN P8_7 +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD4_HAL_IRQ CYHAL_GPIO_IRQ_NONE +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD4_HAL_DIR CYHAL_GPIO_DIR_INPUT +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + #define CYBSP_CSD_SLD4_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_ANALOG +#endif //defined (CY_USING_HAL) + +extern const cy_stc_gpio_pin_config_t CYBSP_WCO_IN_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_WCO_IN_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_WCO_OUT_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_WCO_OUT_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_QSPI_SS_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_SS_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_QSPI_D3_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_D3_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_QSPI_D2_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_D2_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_QSPI_D1_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_D1_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_QSPI_D0_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_D0_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_QSPI_SCK_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_QSPI_SCK_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_USB_DP_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_USB_DP_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_USB_DM_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_USB_DM_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_TX_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_TX_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_WIFI_HOST_WAKE_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_WIFI_HOST_WAKE_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_UART_RX_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_UART_RX_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_UART_TX_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_UART_TX_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_UART_RTS_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_UART_RTS_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_UART_CTS_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_UART_CTS_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_POWER_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_POWER_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_HOST_WAKE_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_HOST_WAKE_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_BT_DEVICE_WAKE_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_BT_DEVICE_WAKE_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_EZI2C_SCL_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_EZI2C_SCL_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_EZI2C_SDA_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_EZI2C_SDA_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_SWO_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_SWO_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_SWDIO_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_SWDIO_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_SWDCK_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_SWDCK_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CINA_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CINA_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CINB_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CINB_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CMOD_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CMOD_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_BTN0_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_BTN0_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_BTN1_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_BTN1_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD0_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_SLD0_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD1_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_SLD1_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD2_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_SLD2_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD3_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_SLD3_obj; +#endif //defined (CY_USING_HAL) +extern const cy_stc_gpio_pin_config_t CYBSP_CSD_SLD4_config; +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t CYBSP_CSD_SLD4_obj; +#endif //defined (CY_USING_HAL) + +void init_cycfg_pins(void); + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_PINS_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_qspi_memslot.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_qspi_memslot.c new file mode 100644 index 0000000000..14d433859d --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_qspi_memslot.c @@ -0,0 +1,265 @@ +/******************************************************************************* +* File Name: cycfg_qspi_memslot.c +* +* Description: +* Provides definitions of the SMIF-driver memory configuration. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_qspi_memslot.h" + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_readCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0xECU, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_QUAD, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0x01U, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_QUAD, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 4U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_QUAD +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_writeEnCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x06U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_writeDisCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x04U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_eraseCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0xDCU, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_chipEraseCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x60U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_programCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x34U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_QUAD, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_QUAD +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_readStsRegQeCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x35U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_readStsRegWipCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x05U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_writeStsRegQeCmd = +{ + /* The 8-bit command. 1 x I/O read command. */ + .command = 0x01U, + /* The width of the command transfer. */ + .cmdWidth = CY_SMIF_WIDTH_SINGLE, + /* The width of the address transfer. */ + .addrWidth = CY_SMIF_WIDTH_SINGLE, + /* The 8-bit mode byte. This value is 0xFFFFFFFF when there is no mode present. */ + .mode = 0xFFFFFFFFU, + /* The width of the mode command transfer. */ + .modeWidth = CY_SMIF_WIDTH_SINGLE, + /* The number of dummy cycles. A zero value suggests no dummy cycles. */ + .dummyCycles = 0U, + /* The width of the data transfer. */ + .dataWidth = CY_SMIF_WIDTH_SINGLE +}; + +const cy_stc_smif_mem_device_cfg_t deviceCfg_S25FL512S_4byteaddr_SlaveSlot_0 = +{ + /* Specifies the number of address bytes used by the memory slave device. */ + .numOfAddrBytes = 0x04U, + /* The size of the memory. */ + .memSize = 0x04000000U, + /* Specifies the Read command. */ + .readCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_readCmd, + /* Specifies the Write Enable command. */ + .writeEnCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_writeEnCmd, + /* Specifies the Write Disable command. */ + .writeDisCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_writeDisCmd, + /* Specifies the Erase command. */ + .eraseCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_eraseCmd, + /* Specifies the sector size of each erase. */ + .eraseSize = 0x00040000U, + /* Specifies the Chip Erase command. */ + .chipEraseCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_chipEraseCmd, + /* Specifies the Program command. */ + .programCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_programCmd, + /* Specifies the page size for programming. */ + .programSize = 0x00000200U, + /* Specifies the command to read the QE-containing status register. */ + .readStsRegQeCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_readStsRegQeCmd, + /* Specifies the command to read the WIP-containing status register. */ + .readStsRegWipCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_readStsRegWipCmd, + /* Specifies the command to write into the QE-containing status register. */ + .writeStsRegQeCmd = (cy_stc_smif_mem_cmd_t*)&S25FL512S_4byteaddr_SlaveSlot_0_writeStsRegQeCmd, + /* The mask for the status register. */ + .stsRegBusyMask = 0x01U, + /* The mask for the status register. */ + .stsRegQuadEnableMask = 0x02U, + /* The max time for the erase type-1 cycle-time in ms. */ + .eraseTime = 2600U, + /* The max time for the chip-erase cycle-time in ms. */ + .chipEraseTime = 460000U, + /* The max time for the page-program cycle-time in us. */ + .programTime = 1300U +}; + +const cy_stc_smif_mem_config_t S25FL512S_4byteaddr_SlaveSlot_0 = +{ + /* Determines the slot number where the memory device is placed. */ + .slaveSelect = CY_SMIF_SLAVE_SELECT_0, + /* Flags. */ + .flags = CY_SMIF_FLAG_MEMORY_MAPPED | CY_SMIF_FLAG_WR_EN, + /* The data-line selection options for a slave device. */ + .dataSelect = CY_SMIF_DATA_SEL0, + /* The base address the memory slave is mapped to in the PSoC memory map. + Valid when the memory-mapped mode is enabled. */ + .baseAddress = 0x18000000U, + /* The size allocated in the PSoC memory map, for the memory slave device. + The size is allocated from the base address. Valid when the memory mapped mode is enabled. */ + .memMappedSize = 0x4000000U, + /* If this memory device is one of the devices in the dual quad SPI configuration. + Valid when the memory mapped mode is enabled. */ + .dualQuadSlots = 0, + /* The configuration of the device. */ + .deviceCfg = (cy_stc_smif_mem_device_cfg_t*)&deviceCfg_S25FL512S_4byteaddr_SlaveSlot_0 +}; + +const cy_stc_smif_mem_config_t* const smifMemConfigs[] = { + &S25FL512S_4byteaddr_SlaveSlot_0 +}; + +const cy_stc_smif_block_config_t smifBlockConfig = +{ + /* The number of SMIF memories defined. */ + .memCount = CY_SMIF_DEVICE_NUM, + /* The pointer to the array of memory config structures of size memCount. */ + .memConfig = (cy_stc_smif_mem_config_t**)smifMemConfigs, + /* The version of the SMIF driver. */ + .majorVersion = CY_SMIF_DRV_VERSION_MAJOR, + /* The version of the SMIF driver. */ + .minorVersion = CY_SMIF_DRV_VERSION_MINOR +}; + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_qspi_memslot.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_qspi_memslot.h new file mode 100644 index 0000000000..0ee62b1d55 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_qspi_memslot.h @@ -0,0 +1,50 @@ +/******************************************************************************* +* File Name: cycfg_qspi_memslot.h +* +* Description: +* Provides declarations of the SMIF-driver memory configuration. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#ifndef CYCFG_QSPI_MEMSLOT_H +#define CYCFG_QSPI_MEMSLOT_H +#include "cy_smif_memslot.h" + +#define CY_SMIF_DEVICE_NUM 1 + +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_readCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_writeEnCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_writeDisCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_eraseCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_chipEraseCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_programCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_readStsRegQeCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_readStsRegWipCmd; +extern const cy_stc_smif_mem_cmd_t S25FL512S_4byteaddr_SlaveSlot_0_writeStsRegQeCmd; + +extern const cy_stc_smif_mem_device_cfg_t deviceCfg_S25FL512S_4byteaddr_SlaveSlot_0; + +extern const cy_stc_smif_mem_config_t S25FL512S_4byteaddr_SlaveSlot_0; +extern const cy_stc_smif_mem_config_t* const smifMemConfigs[CY_SMIF_DEVICE_NUM]; + +extern const cy_stc_smif_block_config_t smifBlockConfig; + + +#endif /*CY_SMIF_MEMCONFIG_H*/ + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_routing.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_routing.c new file mode 100644 index 0000000000..ae79008829 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_routing.c @@ -0,0 +1,39 @@ +/******************************************************************************* +* File Name: cycfg_routing.c +* +* Description: +* Establishes all necessary connections between hardware elements. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_routing.h" + +#include "cy_device_headers.h" + +void init_cycfg_routing(void) +{ + HSIOM->AMUX_SPLIT_CTL[2] = HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_AA_SL_Msk | + HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_AA_SR_Msk | + HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_BB_SL_Msk | + HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_BB_SR_Msk; + HSIOM->AMUX_SPLIT_CTL[4] = HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_AA_SL_Msk | + HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_AA_SR_Msk | + HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_BB_SL_Msk | + HSIOM_V2_AMUX_SPLIT_CTL_SWITCH_BB_SR_Msk; +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_routing.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_routing.h new file mode 100644 index 0000000000..03a5b66fd8 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_routing.h @@ -0,0 +1,71 @@ +/******************************************************************************* +* File Name: cycfg_routing.h +* +* Description: +* Establishes all necessary connections between hardware elements. +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_ROUTING_H) +#define CYCFG_ROUTING_H + +#if defined(__cplusplus) +extern "C" { +#endif + +#include "cycfg_notices.h" +void init_cycfg_routing(void); +#define init_cycfg_connectivity() init_cycfg_routing() +#define ioss_0_port_0_pin_0_ANALOG P0_0_SRSS_WCO_IN +#define ioss_0_port_0_pin_1_ANALOG P0_1_SRSS_WCO_OUT +#define ioss_0_port_11_pin_2_HSIOM P11_2_SMIF_SPI_SELECT0 +#define ioss_0_port_11_pin_3_HSIOM P11_3_SMIF_SPI_DATA3 +#define ioss_0_port_11_pin_4_HSIOM P11_4_SMIF_SPI_DATA2 +#define ioss_0_port_11_pin_5_HSIOM P11_5_SMIF_SPI_DATA1 +#define ioss_0_port_11_pin_6_HSIOM P11_6_SMIF_SPI_DATA0 +#define ioss_0_port_11_pin_7_HSIOM P11_7_SMIF_SPI_CLK +#define ioss_0_port_14_pin_0_AUX USBDP_USB_USB_DP_PAD +#define ioss_0_port_14_pin_1_AUX USBDM_USB_USB_DM_PAD +#define ioss_0_port_1_pin_0_HSIOM HSIOM_SEL_AMUXA +#define ioss_0_port_3_pin_0_HSIOM P3_0_SCB2_UART_RX +#define ioss_0_port_3_pin_1_HSIOM P3_1_SCB2_UART_TX +#define ioss_0_port_3_pin_2_HSIOM P3_2_SCB2_UART_RTS +#define ioss_0_port_3_pin_3_HSIOM P3_3_SCB2_UART_CTS +#define ioss_0_port_6_pin_0_HSIOM P6_0_SCB3_I2C_SCL +#define ioss_0_port_6_pin_1_HSIOM P6_1_SCB3_I2C_SDA +#define ioss_0_port_6_pin_4_HSIOM P6_4_CPUSS_SWJ_SWO_TDO +#define ioss_0_port_6_pin_6_HSIOM P6_6_CPUSS_SWJ_SWDIO_TMS +#define ioss_0_port_6_pin_7_HSIOM P6_7_CPUSS_SWJ_SWCLK_TCLK +#define ioss_0_port_7_pin_1_HSIOM HSIOM_SEL_AMUXB +#define ioss_0_port_7_pin_2_HSIOM HSIOM_SEL_AMUXA +#define ioss_0_port_7_pin_7_HSIOM HSIOM_SEL_AMUXA +#define ioss_0_port_8_pin_1_HSIOM HSIOM_SEL_AMUXA +#define ioss_0_port_8_pin_2_HSIOM HSIOM_SEL_AMUXB +#define ioss_0_port_8_pin_3_HSIOM HSIOM_SEL_AMUXA +#define ioss_0_port_8_pin_4_HSIOM HSIOM_SEL_AMUXB +#define ioss_0_port_8_pin_5_HSIOM HSIOM_SEL_AMUXA +#define ioss_0_port_8_pin_6_HSIOM HSIOM_SEL_AMUXB +#define ioss_0_port_8_pin_7_HSIOM HSIOM_SEL_AMUXA + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_ROUTING_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_system.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_system.c new file mode 100644 index 0000000000..3628e4cdff --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_system.c @@ -0,0 +1,595 @@ +/******************************************************************************* +* File Name: cycfg_system.c +* +* Description: +* System configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#include "cycfg_system.h" + +#define CY_CFG_SYSCLK_ECO_ERROR 1 +#define CY_CFG_SYSCLK_ALTHF_ERROR 2 +#define CY_CFG_SYSCLK_PLL_ERROR 3 +#define CY_CFG_SYSCLK_FLL_ERROR 4 +#define CY_CFG_SYSCLK_WCO_ERROR 5 +#define CY_CFG_SYSCLK_CLKALTSYSTICK_ENABLED 1 +#define CY_CFG_SYSCLK_CLKBAK_ENABLED 1 +#define CY_CFG_SYSCLK_CLKFAST_ENABLED 1 +#define CY_CFG_SYSCLK_FLL_ENABLED 1 +#define CY_CFG_SYSCLK_CLKHF0_ENABLED 1 +#define CY_CFG_SYSCLK_CLKHF0_FREQ_MHZ 100UL +#define CY_CFG_SYSCLK_CLKHF0_CLKPATH CY_SYSCLK_CLKHF_IN_CLKPATH0 +#define CY_CFG_SYSCLK_CLKHF1_ENABLED 1 +#define CY_CFG_SYSCLK_CLKHF1_FREQ_MHZ 48UL +#define CY_CFG_SYSCLK_CLKHF1_CLKPATH CY_SYSCLK_CLKHF_IN_CLKPATH1 +#define CY_CFG_SYSCLK_CLKHF2_ENABLED 1 +#define CY_CFG_SYSCLK_CLKHF2_FREQ_MHZ 50UL +#define CY_CFG_SYSCLK_CLKHF2_CLKPATH CY_SYSCLK_CLKHF_IN_CLKPATH0 +#define CY_CFG_SYSCLK_CLKHF3_ENABLED 1 +#define CY_CFG_SYSCLK_CLKHF3_FREQ_MHZ 48UL +#define CY_CFG_SYSCLK_CLKHF3_CLKPATH CY_SYSCLK_CLKHF_IN_CLKPATH1 +#define CY_CFG_SYSCLK_CLKHF4_ENABLED 1 +#define CY_CFG_SYSCLK_CLKHF4_FREQ_MHZ 100UL +#define CY_CFG_SYSCLK_CLKHF4_CLKPATH CY_SYSCLK_CLKHF_IN_CLKPATH0 +#define CY_CFG_SYSCLK_ILO_ENABLED 1 +#define CY_CFG_SYSCLK_IMO_ENABLED 1 +#define CY_CFG_SYSCLK_CLKLF_ENABLED 1 +#define CY_CFG_SYSCLK_CLKPATH0_ENABLED 1 +#define CY_CFG_SYSCLK_CLKPATH0_SOURCE CY_SYSCLK_CLKPATH_IN_IMO +#define CY_CFG_SYSCLK_CLKPATH1_ENABLED 1 +#define CY_CFG_SYSCLK_CLKPATH1_SOURCE CY_SYSCLK_CLKPATH_IN_IMO +#define CY_CFG_SYSCLK_CLKPATH2_ENABLED 1 +#define CY_CFG_SYSCLK_CLKPATH2_SOURCE CY_SYSCLK_CLKPATH_IN_IMO +#define CY_CFG_SYSCLK_CLKPATH3_ENABLED 1 +#define CY_CFG_SYSCLK_CLKPATH3_SOURCE CY_SYSCLK_CLKPATH_IN_IMO +#define CY_CFG_SYSCLK_CLKPATH4_ENABLED 1 +#define CY_CFG_SYSCLK_CLKPATH4_SOURCE CY_SYSCLK_CLKPATH_IN_IMO +#define CY_CFG_SYSCLK_CLKPERI_ENABLED 1 +#define CY_CFG_SYSCLK_PLL0_ENABLED 1 +#define CY_CFG_SYSCLK_CLKSLOW_ENABLED 1 +#define CY_CFG_SYSCLK_CLKTIMER_ENABLED 1 +#define CY_CFG_SYSCLK_WCO_ENABLED 1 +#define CY_CFG_PWR_ENABLED 1 +#define CY_CFG_PWR_INIT 1 +#define CY_CFG_PWR_USING_PMIC 0 +#define CY_CFG_PWR_VBACKUP_USING_VDDD 1 +#define CY_CFG_PWR_LDO_VOLTAGE CY_SYSPM_LDO_VOLTAGE_LP +#define CY_CFG_PWR_USING_ULP 0 + +static const cy_stc_fll_manual_config_t srss_0_clock_0_fll_0_fllConfig = +{ + .fllMult = 500U, + .refDiv = 20U, + .ccoRange = CY_SYSCLK_FLL_CCO_RANGE4, + .enableOutputDiv = true, + .lockTolerance = 4U, + .igain = 9U, + .pgain = 5U, + .settlingCount = 8U, + .outputMode = CY_SYSCLK_FLLPLL_OUTPUT_OUTPUT, + .cco_Freq = 355U, +}; +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t srss_0_clock_0_pathmux_0_obj = + { + .type = CYHAL_RSC_CLKPATH, + .block_num = 0U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t srss_0_clock_0_pathmux_1_obj = + { + .type = CYHAL_RSC_CLKPATH, + .block_num = 1U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t srss_0_clock_0_pathmux_2_obj = + { + .type = CYHAL_RSC_CLKPATH, + .block_num = 2U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t srss_0_clock_0_pathmux_3_obj = + { + .type = CYHAL_RSC_CLKPATH, + .block_num = 3U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + const cyhal_resource_inst_t srss_0_clock_0_pathmux_4_obj = + { + .type = CYHAL_RSC_CLKPATH, + .block_num = 4U, + .channel_num = 0U, + }; +#endif //defined (CY_USING_HAL) +static const cy_stc_pll_manual_config_t srss_0_clock_0_pll_0_pllConfig = +{ + .feedbackDiv = 30, + .referenceDiv = 1, + .outputDiv = 5, + .lfMode = false, + .outputMode = CY_SYSCLK_FLLPLL_OUTPUT_AUTO, +}; + +__WEAK void cycfg_ClockStartupError(uint32_t error) +{ + (void)error; /* Suppress the compiler warning */ + while(1); +} +__STATIC_INLINE void Cy_SysClk_ClkAltSysTickInit() +{ + Cy_SysTick_SetClockSource(CY_SYSTICK_CLOCK_SOURCE_CLK_LF); +} +__STATIC_INLINE void Cy_SysClk_ClkBakInit() +{ + Cy_SysClk_ClkBakSetSource(CY_SYSCLK_BAK_IN_WCO); +} +__STATIC_INLINE void Cy_SysClk_ClkFastInit() +{ + Cy_SysClk_ClkFastSetDivider(0U); +} +__STATIC_INLINE void Cy_SysClk_FllInit() +{ + if (CY_SYSCLK_SUCCESS != Cy_SysClk_FllManualConfigure(&srss_0_clock_0_fll_0_fllConfig)) + { + cycfg_ClockStartupError(CY_CFG_SYSCLK_FLL_ERROR); + } + if (CY_SYSCLK_SUCCESS != Cy_SysClk_FllEnable(200000UL)) + { + cycfg_ClockStartupError(CY_CFG_SYSCLK_FLL_ERROR); + } +} +__STATIC_INLINE void Cy_SysClk_ClkHf0Init() +{ + Cy_SysClk_ClkHfSetSource(0U, CY_CFG_SYSCLK_CLKHF0_CLKPATH); + Cy_SysClk_ClkHfSetDivider(0U, CY_SYSCLK_CLKHF_NO_DIVIDE); +} +__STATIC_INLINE void Cy_SysClk_ClkHf1Init() +{ + Cy_SysClk_ClkHfSetSource(CY_CFG_SYSCLK_CLKHF1, CY_CFG_SYSCLK_CLKHF1_CLKPATH); + Cy_SysClk_ClkHfSetDivider(CY_CFG_SYSCLK_CLKHF1, CY_SYSCLK_CLKHF_NO_DIVIDE); + Cy_SysClk_ClkHfEnable(CY_CFG_SYSCLK_CLKHF1); +} +__STATIC_INLINE void Cy_SysClk_ClkHf2Init() +{ + Cy_SysClk_ClkHfSetSource(CY_CFG_SYSCLK_CLKHF2, CY_CFG_SYSCLK_CLKHF2_CLKPATH); + Cy_SysClk_ClkHfSetDivider(CY_CFG_SYSCLK_CLKHF2, CY_SYSCLK_CLKHF_DIVIDE_BY_2); + Cy_SysClk_ClkHfEnable(CY_CFG_SYSCLK_CLKHF2); +} +__STATIC_INLINE void Cy_SysClk_ClkHf3Init() +{ + Cy_SysClk_ClkHfSetSource(CY_CFG_SYSCLK_CLKHF3, CY_CFG_SYSCLK_CLKHF3_CLKPATH); + Cy_SysClk_ClkHfSetDivider(CY_CFG_SYSCLK_CLKHF3, CY_SYSCLK_CLKHF_NO_DIVIDE); + Cy_SysClk_ClkHfEnable(CY_CFG_SYSCLK_CLKHF3); +} +__STATIC_INLINE void Cy_SysClk_ClkHf4Init() +{ + Cy_SysClk_ClkHfSetSource(CY_CFG_SYSCLK_CLKHF4, CY_CFG_SYSCLK_CLKHF4_CLKPATH); + Cy_SysClk_ClkHfSetDivider(CY_CFG_SYSCLK_CLKHF4, CY_SYSCLK_CLKHF_NO_DIVIDE); + Cy_SysClk_ClkHfEnable(CY_CFG_SYSCLK_CLKHF4); +} +__STATIC_INLINE void Cy_SysClk_IloInit() +{ + /* The WDT is unlocked in the default startup code */ + Cy_SysClk_IloEnable(); + Cy_SysClk_IloHibernateOn(true); +} +__STATIC_INLINE void Cy_SysClk_ClkLfInit() +{ + /* The WDT is unlocked in the default startup code */ + Cy_SysClk_ClkLfSetSource(CY_SYSCLK_CLKLF_IN_WCO); +} +__STATIC_INLINE void Cy_SysClk_ClkPath0Init() +{ + Cy_SysClk_ClkPathSetSource(0U, CY_CFG_SYSCLK_CLKPATH0_SOURCE); +} +__STATIC_INLINE void Cy_SysClk_ClkPath1Init() +{ + Cy_SysClk_ClkPathSetSource(1U, CY_CFG_SYSCLK_CLKPATH1_SOURCE); +} +__STATIC_INLINE void Cy_SysClk_ClkPath2Init() +{ + Cy_SysClk_ClkPathSetSource(2U, CY_CFG_SYSCLK_CLKPATH2_SOURCE); +} +__STATIC_INLINE void Cy_SysClk_ClkPath3Init() +{ + Cy_SysClk_ClkPathSetSource(3U, CY_CFG_SYSCLK_CLKPATH3_SOURCE); +} +__STATIC_INLINE void Cy_SysClk_ClkPath4Init() +{ + Cy_SysClk_ClkPathSetSource(4U, CY_CFG_SYSCLK_CLKPATH4_SOURCE); +} +__STATIC_INLINE void Cy_SysClk_ClkPeriInit() +{ + Cy_SysClk_ClkPeriSetDivider(0U); +} +__STATIC_INLINE void Cy_SysClk_Pll0Init() +{ + if (CY_SYSCLK_SUCCESS != Cy_SysClk_PllManualConfigure(1U, &srss_0_clock_0_pll_0_pllConfig)) + { + cycfg_ClockStartupError(CY_CFG_SYSCLK_PLL_ERROR); + } + if (CY_SYSCLK_SUCCESS != Cy_SysClk_PllEnable(1U, 10000u)) + { + cycfg_ClockStartupError(CY_CFG_SYSCLK_PLL_ERROR); + } +} +__STATIC_INLINE void Cy_SysClk_ClkSlowInit() +{ + Cy_SysClk_ClkSlowSetDivider(0U); +} +__STATIC_INLINE void Cy_SysClk_ClkTimerInit() +{ + Cy_SysClk_ClkTimerDisable(); + Cy_SysClk_ClkTimerSetSource(CY_SYSCLK_CLKTIMER_IN_IMO); + Cy_SysClk_ClkTimerSetDivider(0U); + Cy_SysClk_ClkTimerEnable(); +} +__STATIC_INLINE void Cy_SysClk_WcoInit() +{ + (void)Cy_GPIO_Pin_FastInit(GPIO_PRT0, 0U, 0x00U, 0x00U, HSIOM_SEL_GPIO); + (void)Cy_GPIO_Pin_FastInit(GPIO_PRT0, 1U, 0x00U, 0x00U, HSIOM_SEL_GPIO); + if (CY_SYSCLK_SUCCESS != Cy_SysClk_WcoEnable(1000000UL)) + { + cycfg_ClockStartupError(CY_CFG_SYSCLK_WCO_ERROR); + } +} +__STATIC_INLINE void init_cycfg_power(void) +{ + /* Reset the Backup domain on POR, XRES, BOD only if Backup domain is supplied by VDDD */ + #if (CY_CFG_PWR_VBACKUP_USING_VDDD) + if (0u == Cy_SysLib_GetResetReason() /* POR, XRES, or BOD */) + { + Cy_SysLib_ResetBackupDomain(); + Cy_SysClk_IloDisable(); + Cy_SysClk_IloInit(); + } + #else /* Dedicated Supply */ + Cy_SysPm_BackupSetSupply(CY_SYSPM_VDDBACKUP_VBACKUP); + #endif /* CY_CFG_PWR_VBACKUP_USING_VDDD */ + + /* Configure core regulator */ + #if CY_CFG_PWR_USING_LDO + Cy_SysPm_LdoSetVoltage(CY_SYSPM_LDO_VOLTAGE_LP); + Cy_SysPm_LdoSetMode(CY_SYSPM_LDO_MODE_NORMAL); + #else + Cy_SysPm_BuckEnable(CY_SYSPM_BUCK_OUT1_VOLTAGE_LP); + #endif /* CY_CFG_PWR_USING_LDO */ + /* Configure PMIC */ + Cy_SysPm_UnlockPmic(); + #if CY_CFG_PWR_USING_PMIC + Cy_SysPm_PmicEnableOutput(); + #else + Cy_SysPm_PmicDisableOutput(); + #endif /* CY_CFG_PWR_USING_PMIC */ +} + + +void init_cycfg_system(void) +{ + /* Set worst case memory wait states (! ultra low power, 150 MHz), will update at the end */ + Cy_SysLib_SetWaitStates(false, 150UL); + #ifdef CY_CFG_PWR_ENABLED + #ifdef CY_CFG_PWR_INIT + init_cycfg_power(); + #else + #warning Power system will not be configured. Update power personality to v1.20 or later. + #endif /* CY_CFG_PWR_INIT */ + #endif /* CY_CFG_PWR_ENABLED */ + + /* Reset the core clock path to default and disable all the FLLs/PLLs */ + Cy_SysClk_ClkHfSetDivider(0U, CY_SYSCLK_CLKHF_NO_DIVIDE); + Cy_SysClk_ClkFastSetDivider(0U); + Cy_SysClk_ClkPeriSetDivider(1U); + Cy_SysClk_ClkSlowSetDivider(0U); + for (uint32_t pll = CY_SRSS_NUM_PLL; pll > 0UL; --pll) /* PLL 1 is the first PLL. 0 is invalid. */ + { + (void)Cy_SysClk_PllDisable(pll); + } + Cy_SysClk_ClkPathSetSource(CY_SYSCLK_CLKHF_IN_CLKPATH1, CY_SYSCLK_CLKPATH_IN_IMO); + + if ((CY_SYSCLK_CLKHF_IN_CLKPATH0 == Cy_SysClk_ClkHfGetSource(0UL)) && + (CY_SYSCLK_CLKPATH_IN_WCO == Cy_SysClk_ClkPathGetSource(CY_SYSCLK_CLKHF_IN_CLKPATH0))) + { + Cy_SysClk_ClkHfSetSource(0U, CY_SYSCLK_CLKHF_IN_CLKPATH1); + } + + Cy_SysClk_FllDisable(); + Cy_SysClk_ClkPathSetSource(CY_SYSCLK_CLKHF_IN_CLKPATH0, CY_SYSCLK_CLKPATH_IN_IMO); + Cy_SysClk_ClkHfSetSource(0UL, CY_SYSCLK_CLKHF_IN_CLKPATH0); + #ifdef CY_IP_MXBLESS + (void)Cy_BLE_EcoReset(); + #endif + + + /* Enable all source clocks */ + #ifdef CY_CFG_SYSCLK_PILO_ENABLED + Cy_SysClk_PiloInit(); + #endif + + #ifdef CY_CFG_SYSCLK_WCO_ENABLED + Cy_SysClk_WcoInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKLF_ENABLED + Cy_SysClk_ClkLfInit(); + #endif + + #ifdef CY_CFG_SYSCLK_ALTHF_ENABLED + Cy_SysClk_AltHfInit(); + #endif + + #ifdef CY_CFG_SYSCLK_ECO_ENABLED + Cy_SysClk_EcoInit(); + #endif + + #ifdef CY_CFG_SYSCLK_EXTCLK_ENABLED + Cy_SysClk_ExtClkInit(); + #endif + + /* Configure CPU clock dividers */ + #ifdef CY_CFG_SYSCLK_CLKFAST_ENABLED + Cy_SysClk_ClkFastInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKPERI_ENABLED + Cy_SysClk_ClkPeriInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKSLOW_ENABLED + Cy_SysClk_ClkSlowInit(); + #endif + + #if ((CY_CFG_SYSCLK_CLKPATH0_SOURCE == CY_SYSCLK_CLKPATH_IN_WCO) && (CY_CFG_SYSCLK_CLKHF0_CLKPATH == CY_SYSCLK_CLKHF_IN_CLKPATH0)) + /* Configure HFCLK0 to temporarily run from IMO to initialize other clocks */ + Cy_SysClk_ClkPathSetSource(1UL, CY_SYSCLK_CLKPATH_IN_IMO); + Cy_SysClk_ClkHfSetSource(0UL, CY_SYSCLK_CLKHF_IN_CLKPATH1); + #else + #ifdef CY_CFG_SYSCLK_CLKPATH1_ENABLED + Cy_SysClk_ClkPath1Init(); + #endif + #endif + + /* Configure Path Clocks */ + #ifdef CY_CFG_SYSCLK_CLKPATH0_ENABLED + Cy_SysClk_ClkPath0Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH2_ENABLED + Cy_SysClk_ClkPath2Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH3_ENABLED + Cy_SysClk_ClkPath3Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH4_ENABLED + Cy_SysClk_ClkPath4Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH5_ENABLED + Cy_SysClk_ClkPath5Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH6_ENABLED + Cy_SysClk_ClkPath6Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH7_ENABLED + Cy_SysClk_ClkPath7Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH8_ENABLED + Cy_SysClk_ClkPath8Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH9_ENABLED + Cy_SysClk_ClkPath9Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH10_ENABLED + Cy_SysClk_ClkPath10Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH11_ENABLED + Cy_SysClk_ClkPath11Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH12_ENABLED + Cy_SysClk_ClkPath12Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH13_ENABLED + Cy_SysClk_ClkPath13Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH14_ENABLED + Cy_SysClk_ClkPath14Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKPATH15_ENABLED + Cy_SysClk_ClkPath15Init(); + #endif + + /* Configure and enable FLL */ + #ifdef CY_CFG_SYSCLK_FLL_ENABLED + Cy_SysClk_FllInit(); + #endif + + Cy_SysClk_ClkHf0Init(); + + #if ((CY_CFG_SYSCLK_CLKPATH0_SOURCE == CY_SYSCLK_CLKPATH_IN_WCO) && (CY_CFG_SYSCLK_CLKHF0_CLKPATH == CY_SYSCLK_CLKHF_IN_CLKPATH0)) + #ifdef CY_CFG_SYSCLK_CLKPATH1_ENABLED + /* Apply the ClkPath1 user setting */ + Cy_SysClk_ClkPath1Init(); + #endif + #endif + + /* Configure and enable PLLs */ + #ifdef CY_CFG_SYSCLK_PLL0_ENABLED + Cy_SysClk_Pll0Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL1_ENABLED + Cy_SysClk_Pll1Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL2_ENABLED + Cy_SysClk_Pll2Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL3_ENABLED + Cy_SysClk_Pll3Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL4_ENABLED + Cy_SysClk_Pll4Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL5_ENABLED + Cy_SysClk_Pll5Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL6_ENABLED + Cy_SysClk_Pll6Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL7_ENABLED + Cy_SysClk_Pll7Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL8_ENABLED + Cy_SysClk_Pll8Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL9_ENABLED + Cy_SysClk_Pll9Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL10_ENABLED + Cy_SysClk_Pll10Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL11_ENABLED + Cy_SysClk_Pll11Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL12_ENABLED + Cy_SysClk_Pll12Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL13_ENABLED + Cy_SysClk_Pll13Init(); + #endif + #ifdef CY_CFG_SYSCLK_PLL14_ENABLED + Cy_SysClk_Pll14Init(); + #endif + + /* Configure HF clocks */ + #ifdef CY_CFG_SYSCLK_CLKHF1_ENABLED + Cy_SysClk_ClkHf1Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF2_ENABLED + Cy_SysClk_ClkHf2Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF3_ENABLED + Cy_SysClk_ClkHf3Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF4_ENABLED + Cy_SysClk_ClkHf4Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF5_ENABLED + Cy_SysClk_ClkHf5Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF6_ENABLED + Cy_SysClk_ClkHf6Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF7_ENABLED + Cy_SysClk_ClkHf7Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF8_ENABLED + Cy_SysClk_ClkHf8Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF9_ENABLED + Cy_SysClk_ClkHf9Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF10_ENABLED + Cy_SysClk_ClkHf10Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF11_ENABLED + Cy_SysClk_ClkHf11Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF12_ENABLED + Cy_SysClk_ClkHf12Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF13_ENABLED + Cy_SysClk_ClkHf13Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF14_ENABLED + Cy_SysClk_ClkHf14Init(); + #endif + #ifdef CY_CFG_SYSCLK_CLKHF15_ENABLED + Cy_SysClk_ClkHf15Init(); + #endif + + /* Configure miscellaneous clocks */ + #ifdef CY_CFG_SYSCLK_CLKTIMER_ENABLED + Cy_SysClk_ClkTimerInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKALTSYSTICK_ENABLED + Cy_SysClk_ClkAltSysTickInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKPUMP_ENABLED + Cy_SysClk_ClkPumpInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKBAK_ENABLED + Cy_SysClk_ClkBakInit(); + #endif + + /* Configure default enabled clocks */ + #ifdef CY_CFG_SYSCLK_ILO_ENABLED + Cy_SysClk_IloInit(); + #else + Cy_SysClk_IloDisable(); + #endif + + #ifndef CY_CFG_SYSCLK_IMO_ENABLED + #error the IMO must be enabled for proper chip operation + #endif + + #ifdef CY_CFG_SYSCLK_MFO_ENABLED + Cy_SysClk_MfoInit(); + #endif + + #ifdef CY_CFG_SYSCLK_CLKMF_ENABLED + Cy_SysClk_ClkMfInit(); + #endif + + /* Set accurate flash wait states */ + #if (defined (CY_CFG_PWR_ENABLED) && defined (CY_CFG_SYSCLK_CLKHF0_ENABLED)) + Cy_SysLib_SetWaitStates(CY_CFG_PWR_USING_ULP != 0, CY_CFG_SYSCLK_CLKHF0_FREQ_MHZ); + #endif + + /* Update System Core Clock values for correct Cy_SysLib_Delay functioning */ + SystemCoreClockUpdate(); + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&srss_0_clock_0_pathmux_0_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&srss_0_clock_0_pathmux_1_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&srss_0_clock_0_pathmux_2_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&srss_0_clock_0_pathmux_3_obj); +#endif //defined (CY_USING_HAL) + +#if defined (CY_USING_HAL) + cyhal_hwmgr_reserve(&srss_0_clock_0_pathmux_4_obj); +#endif //defined (CY_USING_HAL) +} diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_system.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_system.h new file mode 100644 index 0000000000..9e02b87573 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/cycfg_system.h @@ -0,0 +1,111 @@ +/******************************************************************************* +* File Name: cycfg_system.h +* +* Description: +* System configuration +* This file was automatically generated and should not be modified. +* +******************************************************************************** +* Copyright 2017-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +********************************************************************************/ + +#if !defined(CYCFG_SYSTEM_H) +#define CYCFG_SYSTEM_H + +#include "cycfg_notices.h" +#include "cy_sysclk.h" +#include "cy_systick.h" +#if defined (CY_USING_HAL) + #include "cyhal_hwmgr.h" +#endif //defined (CY_USING_HAL) +#include "cy_gpio.h" +#include "cy_syspm.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +#define cpuss_0_dap_0_ENABLED 1U +#define srss_0_clock_0_ENABLED 1U +#define srss_0_clock_0_altsystickclk_0_ENABLED 1U +#define srss_0_clock_0_bakclk_0_ENABLED 1U +#define srss_0_clock_0_fastclk_0_ENABLED 1U +#define srss_0_clock_0_fll_0_ENABLED 1U +#define srss_0_clock_0_hfclk_0_ENABLED 1U +#define CY_CFG_SYSCLK_CLKHF0 0UL +#define srss_0_clock_0_hfclk_1_ENABLED 1U +#define CY_CFG_SYSCLK_CLKHF1 1UL +#define srss_0_clock_0_hfclk_2_ENABLED 1U +#define CY_CFG_SYSCLK_CLKHF2 2UL +#define srss_0_clock_0_hfclk_3_ENABLED 1U +#define CY_CFG_SYSCLK_CLKHF3 3UL +#define srss_0_clock_0_hfclk_4_ENABLED 1U +#define CY_CFG_SYSCLK_CLKHF4 4UL +#define srss_0_clock_0_ilo_0_ENABLED 1U +#define srss_0_clock_0_imo_0_ENABLED 1U +#define srss_0_clock_0_lfclk_0_ENABLED 1U +#define CY_CFG_SYSCLK_CLKLF_FREQ_HZ 32768 +#define srss_0_clock_0_pathmux_0_ENABLED 1U +#define srss_0_clock_0_pathmux_1_ENABLED 1U +#define srss_0_clock_0_pathmux_2_ENABLED 1U +#define srss_0_clock_0_pathmux_3_ENABLED 1U +#define srss_0_clock_0_pathmux_4_ENABLED 1U +#define srss_0_clock_0_periclk_0_ENABLED 1U +#define srss_0_clock_0_pll_0_ENABLED 1U +#define srss_0_clock_0_slowclk_0_ENABLED 1U +#define srss_0_clock_0_timerclk_0_ENABLED 1U +#define srss_0_clock_0_wco_0_ENABLED 1U +#define srss_0_power_0_ENABLED 1U +#define CY_CFG_PWR_MODE_LP 0x01UL +#define CY_CFG_PWR_MODE_ULP 0x02UL +#define CY_CFG_PWR_MODE_ACTIVE 0x04UL +#define CY_CFG_PWR_MODE_SLEEP 0x08UL +#define CY_CFG_PWR_MODE_DEEPSLEEP 0x10UL +#define CY_CFG_PWR_SYS_IDLE_MODE CY_CFG_PWR_MODE_DEEPSLEEP +#define CY_CFG_PWR_SYS_ACTIVE_MODE CY_CFG_PWR_MODE_LP +#define CY_CFG_PWR_DEEPSLEEP_LATENCY 0UL +#define CY_CFG_PWR_USING_LDO 1 +#define CY_CFG_PWR_VDDA_MV 3300 +#define CY_CFG_PWR_VDDD_MV 3300 +#define CY_CFG_PWR_VBACKUP_MV 3300 +#define CY_CFG_PWR_VDD_NS_MV 3300 +#define CY_CFG_PWR_VDDIO0_MV 3300 +#define CY_CFG_PWR_VDDIO1_MV 3300 + +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t srss_0_clock_0_pathmux_0_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t srss_0_clock_0_pathmux_1_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t srss_0_clock_0_pathmux_2_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t srss_0_clock_0_pathmux_3_obj; +#endif //defined (CY_USING_HAL) +#if defined (CY_USING_HAL) + extern const cyhal_resource_inst_t srss_0_clock_0_pathmux_4_obj; +#endif //defined (CY_USING_HAL) + +void init_cycfg_system(void); + +#if defined(__cplusplus) +} +#endif + + +#endif /* CYCFG_SYSTEM_H */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/qspi_config.cfg b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/qspi_config.cfg new file mode 100644 index 0000000000..5557ddecdd --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/GeneratedSource/qspi_config.cfg @@ -0,0 +1,4 @@ +set SMIF_BANKS { + 0 {addr 0x18000000 size 0x4000000 psize 0x00000200 esize 0x00040000} +} + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/cyreservedresources.list b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/cyreservedresources.list index 95dbc8d2ea..85db987889 100644 --- a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/cyreservedresources.list +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/cyreservedresources.list @@ -1,28 +1,6 @@ -[Device="CYB0644ABZI-D44"] +[Device=CYB0644ABZI-D44] [Blocks] -# User IO -# CYBSP_USER_LED1 -ioss[0].port[1].pin[5] -# CYBSP_USER_LED2 -ioss[0].port[13].pin[7] -# CYBSP_USER_LED3 -ioss[0].port[0].pin[3] -# CYBSP_USER_LED4 -ioss[0].port[1].pin[1] -# CYBSP_USER_LED5 -ioss[0].port[11].pin[1] -# CYBSP_USER_BTN1 -ioss[0].port[0].pin[4] - -# Debug -# CYBSP_DEBUG_UART -scb[5] -# CYBSP_DEBUG_UART_RX -ioss[0].port[5].pin[0] -# CYBSP_DEBUG_UART_TX -ioss[0].port[5].pin[1] - # WIFI # CYBSP_WIFI_SDIO sdhc[0] @@ -39,4 +17,4 @@ ioss[0].port[2].pin[4] # CYBSP_WIFI_SDIO_CLK ioss[0].port[2].pin[5] # CYBSP_WIFI_WL_REG_ON -ioss[0].port[2].pin[6] \ No newline at end of file +ioss[0].port[2].pin[6] diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.cycapsense b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.cycapsense new file mode 100644 index 0000000000..13cf564a5a --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.cycapsense @@ -0,0 +1,409 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.cyqspi b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.cyqspi new file mode 100644 index 0000000000..3c5fbe94fb --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.cyqspi @@ -0,0 +1,63 @@ + + + + PSoC 6.xml + + + 0 + S25FL512S-4byteaddr + true + None + 0x18000000 + 0x4000000 + 0x1BFFFFFF + true + false + QUAD_SPI_DATA_0_3 + S25FL512S-4byteaddr + true + + + 1 + Not used + false + None + 0x18010000 + 0x10000 + 0x1801FFFF + false + false + SPI_MOSI_MISO_DATA_0_1 + default_memory.xml + true + + + 2 + Not used + false + None + 0x18020000 + 0x10000 + 0x1802FFFF + false + false + SPI_MOSI_MISO_DATA_0_1 + default_memory.xml + true + + + 3 + Not used + false + None + 0x18030000 + 0x10000 + 0x1803FFFF + false + false + SPI_MOSI_MISO_DATA_0_1 + default_memory.xml + true + + + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.modus b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.modus new file mode 100644 index 0000000000..b4af58d441 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/COMPONENT_BSP_DESIGN_MODUS/design.modus @@ -0,0 +1,893 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PeripheralNames.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PeripheralNames.h new file mode 100644 index 0000000000..10d8414d4b --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PeripheralNames.h @@ -0,0 +1,114 @@ +/* + * mbed Microcontroller Library + * Copyright (c) 2017-2018 Future Electronics + * Copyright (c) 2019 Cypress Semiconductor Corporation + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" +#include "PinNames.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + UART_0 = (int)SCB0_BASE, + UART_1 = (int)SCB1_BASE, + UART_2 = (int)SCB2_BASE, + UART_3 = (int)SCB3_BASE, + UART_4 = (int)SCB4_BASE, + UART_5 = (int)SCB5_BASE, + UART_6 = (int)SCB6_BASE, + UART_7 = (int)SCB7_BASE, +} UARTName; + +#define DEVICE_SPI_COUNT CY_IP_MXSCB_INSTANCES + +typedef enum { + SPI_0 = (int)SCB0_BASE, + SPI_1 = (int)SCB1_BASE, + SPI_2 = (int)SCB2_BASE, + SPI_3 = (int)SCB3_BASE, + SPI_4 = (int)SCB4_BASE, + SPI_5 = (int)SCB5_BASE, + SPI_6 = (int)SCB6_BASE, + SPI_7 = (int)SCB7_BASE, + SPI_8 = (int)SCB8_BASE, +} SPIName; + +typedef enum { + I2C_0 = (int)SCB0_BASE, + I2C_1 = (int)SCB1_BASE, + I2C_2 = (int)SCB2_BASE, + I2C_3 = (int)SCB3_BASE, + I2C_4 = (int)SCB4_BASE, + I2C_5 = (int)SCB5_BASE, + I2C_6 = (int)SCB6_BASE, + I2C_7 = (int)SCB7_BASE, + I2C_8 = (int)SCB8_BASE, +} I2CName; + +typedef enum { + PWM_32b_0 = TCPWM0_BASE, + PWM_32b_1, + PWM_32b_2, + PWM_32b_3, + PWM_32b_4, + PWM_32b_5, + PWM_32b_6, + PWM_32b_7, + PWM_16b_0 = TCPWM1_BASE, + PWM_16b_1, + PWM_16b_2, + PWM_16b_3, + PWM_16b_4, + PWM_16b_5, + PWM_16b_6, + PWM_16b_7, + PWM_16b_8, + PWM_16b_9, + PWM_16b_10, + PWM_16b_11, + PWM_16b_12, + PWM_16b_13, + PWM_16b_14, + PWM_16b_15, + PWM_16b_16, + PWM_16b_17, + PWM_16b_18, + PWM_16b_19, + PWM_16b_20, + PWM_16b_21, + PWM_16b_22, + PWM_16b_23, +} PWMName; + +typedef enum { + ADC_0 = (int)SAR_BASE, +} ADCName; + +typedef enum { + QSPI_0, +} QSPIName; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PeripheralPins.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PeripheralPins.c new file mode 100644 index 0000000000..4df4072376 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PeripheralPins.c @@ -0,0 +1,467 @@ +/* + * mbed Microcontroller Library + * Copyright (c) 2017-2018 Future Electronics + * Copyright (c) 2019 Cypress Semiconductor Corporation + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "PeripheralNames.h" +#include "PeripheralPins.h" +#include "pinmap.h" + +#if DEVICE_SERIAL +//*** SERIAL *** +const PinMap PinMap_UART_RX[] = { + {P0_2, UART_0, CYHAL_PIN_IN_FUNCTION(P0_2_SCB0_UART_RX)}, + {P1_0, UART_7, CYHAL_PIN_IN_FUNCTION(P1_0_SCB7_UART_RX)}, + {P2_0, UART_1, CYHAL_PIN_IN_FUNCTION(P2_0_SCB1_UART_RX)}, + {P3_0, UART_2, CYHAL_PIN_IN_FUNCTION(P3_0_SCB2_UART_RX)}, + {P4_0, UART_7, CYHAL_PIN_IN_FUNCTION(P4_0_SCB7_UART_RX)}, + {P5_0, UART_5, CYHAL_PIN_IN_FUNCTION(P5_0_SCB5_UART_RX)}, + {P6_0, UART_3, CYHAL_PIN_IN_FUNCTION(P6_0_SCB3_UART_RX)}, + {P6_4, UART_6, CYHAL_PIN_IN_FUNCTION(P6_4_SCB6_UART_RX)}, + {P7_0, UART_4, CYHAL_PIN_IN_FUNCTION(P7_0_SCB4_UART_RX)}, + {P8_0, UART_4, CYHAL_PIN_IN_FUNCTION(P8_0_SCB4_UART_RX)}, + {P9_0, UART_2, CYHAL_PIN_IN_FUNCTION(P9_0_SCB2_UART_RX)}, + {P10_0, UART_1, CYHAL_PIN_IN_FUNCTION(P10_0_SCB1_UART_RX)}, + {P11_0, UART_5, CYHAL_PIN_IN_FUNCTION(P11_0_SCB5_UART_RX)}, + {P12_0, UART_6, CYHAL_PIN_IN_FUNCTION(P12_0_SCB6_UART_RX)}, + {P13_0, UART_6, CYHAL_PIN_IN_FUNCTION(P13_0_SCB6_UART_RX)}, + {NC, NC, 0} +}; +const PinMap PinMap_UART_TX[] = { + {P0_3, UART_0, CYHAL_PIN_OUT_FUNCTION(P0_3_SCB0_UART_TX)}, + {P1_1, UART_7, CYHAL_PIN_OUT_FUNCTION(P1_1_SCB7_UART_TX)}, + {P2_1, UART_1, CYHAL_PIN_OUT_FUNCTION(P2_1_SCB1_UART_TX)}, + {P3_1, UART_2, CYHAL_PIN_OUT_FUNCTION(P3_1_SCB2_UART_TX)}, + {P4_1, UART_7, CYHAL_PIN_OUT_FUNCTION(P4_1_SCB7_UART_TX)}, + {P5_1, UART_5, CYHAL_PIN_OUT_FUNCTION(P5_1_SCB5_UART_TX)}, + {P6_1, UART_3, CYHAL_PIN_OUT_FUNCTION(P6_1_SCB3_UART_TX)}, + {P6_5, UART_6, CYHAL_PIN_OUT_FUNCTION(P6_5_SCB6_UART_TX)}, + {P7_1, UART_4, CYHAL_PIN_OUT_FUNCTION(P7_1_SCB4_UART_TX)}, + {P8_1, UART_4, CYHAL_PIN_OUT_FUNCTION(P8_1_SCB4_UART_TX)}, + {P9_1, UART_2, CYHAL_PIN_OUT_FUNCTION(P9_1_SCB2_UART_TX)}, + {P10_1, UART_1, CYHAL_PIN_OUT_FUNCTION(P10_1_SCB1_UART_TX)}, + {P11_1, UART_5, CYHAL_PIN_OUT_FUNCTION(P11_1_SCB5_UART_TX)}, + {P12_1, UART_6, CYHAL_PIN_OUT_FUNCTION(P12_1_SCB6_UART_TX)}, + {P13_1, UART_6, CYHAL_PIN_OUT_FUNCTION(P13_1_SCB6_UART_TX)}, + {NC, NC, 0} +}; +const PinMap PinMap_UART_RTS[] = { + {P0_4, UART_0, CYHAL_PIN_OUT_FUNCTION(P0_4_SCB0_UART_RTS)}, + {P1_2, UART_7, CYHAL_PIN_OUT_FUNCTION(P1_2_SCB7_UART_RTS)}, + {P2_2, UART_1, CYHAL_PIN_OUT_FUNCTION(P2_2_SCB1_UART_RTS)}, + {P3_2, UART_2, CYHAL_PIN_OUT_FUNCTION(P3_2_SCB2_UART_RTS)}, + {P5_2, UART_5, CYHAL_PIN_OUT_FUNCTION(P5_2_SCB5_UART_RTS)}, + {P6_2, UART_3, CYHAL_PIN_OUT_FUNCTION(P6_2_SCB3_UART_RTS)}, + {P6_6, UART_6, CYHAL_PIN_OUT_FUNCTION(P6_6_SCB6_UART_RTS)}, + {P7_2, UART_4, CYHAL_PIN_OUT_FUNCTION(P7_2_SCB4_UART_RTS)}, + {P8_2, UART_4, CYHAL_PIN_OUT_FUNCTION(P8_2_SCB4_UART_RTS)}, + {P9_2, UART_2, CYHAL_PIN_OUT_FUNCTION(P9_2_SCB2_UART_RTS)}, + {P10_2, UART_1, CYHAL_PIN_OUT_FUNCTION(P10_2_SCB1_UART_RTS)}, + {P11_2, UART_5, CYHAL_PIN_OUT_FUNCTION(P11_2_SCB5_UART_RTS)}, + {P12_2, UART_6, CYHAL_PIN_OUT_FUNCTION(P12_2_SCB6_UART_RTS)}, + {NC, NC, 0} +}; +const PinMap PinMap_UART_CTS[] = { + {P0_5, UART_0, CYHAL_PIN_IN_FUNCTION(P0_5_SCB0_UART_CTS)}, + {P1_3, UART_7, CYHAL_PIN_IN_FUNCTION(P1_3_SCB7_UART_CTS)}, + {P2_3, UART_1, CYHAL_PIN_IN_FUNCTION(P2_3_SCB1_UART_CTS)}, + {P3_3, UART_2, CYHAL_PIN_IN_FUNCTION(P3_3_SCB2_UART_CTS)}, + {P5_3, UART_5, CYHAL_PIN_IN_FUNCTION(P5_3_SCB5_UART_CTS)}, + {P6_3, UART_3, CYHAL_PIN_IN_FUNCTION(P6_3_SCB3_UART_CTS)}, + {P6_7, UART_6, CYHAL_PIN_IN_FUNCTION(P6_7_SCB6_UART_CTS)}, + {P7_3, UART_4, CYHAL_PIN_IN_FUNCTION(P7_3_SCB4_UART_CTS)}, + {P8_3, UART_4, CYHAL_PIN_IN_FUNCTION(P8_3_SCB4_UART_CTS)}, + {P9_3, UART_2, CYHAL_PIN_IN_FUNCTION(P9_3_SCB2_UART_CTS)}, + {P10_3, UART_1, CYHAL_PIN_IN_FUNCTION(P10_3_SCB1_UART_CTS)}, + {P11_3, UART_5, CYHAL_PIN_IN_FUNCTION(P11_3_SCB5_UART_CTS)}, + {P12_3, UART_6, CYHAL_PIN_IN_FUNCTION(P12_3_SCB6_UART_CTS)}, + {NC, NC, 0} +}; +#endif // DEVICE_SERIAL + + +#if DEVICE_I2C +//*** I2C *** +const PinMap PinMap_I2C_SCL[] = { + {P0_2, I2C_0, CYHAL_PIN_OD_FUNCTION(P0_2_SCB0_I2C_SCL)}, + {P1_0, I2C_7, CYHAL_PIN_OD_FUNCTION(P1_0_SCB7_I2C_SCL)}, + {P2_0, I2C_1, CYHAL_PIN_OD_FUNCTION(P2_0_SCB1_I2C_SCL)}, + {P3_0, I2C_2, CYHAL_PIN_OD_FUNCTION(P3_0_SCB2_I2C_SCL)}, + {P4_0, I2C_7, CYHAL_PIN_OD_FUNCTION(P4_0_SCB7_I2C_SCL)}, + {P5_0, I2C_5, CYHAL_PIN_OD_FUNCTION(P5_0_SCB5_I2C_SCL)}, + {P6_0, I2C_3, CYHAL_PIN_OD_FUNCTION(P6_0_SCB3_I2C_SCL)}, + {P6_0, I2C_8, CYHAL_PIN_OD_FUNCTION(P6_0_SCB8_I2C_SCL)}, + {P6_4, I2C_6, CYHAL_PIN_OD_FUNCTION(P6_4_SCB6_I2C_SCL)}, + {P6_4, I2C_8, CYHAL_PIN_OD_FUNCTION(P6_4_SCB8_I2C_SCL)}, + {P7_0, I2C_4, CYHAL_PIN_OD_FUNCTION(P7_0_SCB4_I2C_SCL)}, + {P8_0, I2C_4, CYHAL_PIN_OD_FUNCTION(P8_0_SCB4_I2C_SCL)}, + {P9_0, I2C_2, CYHAL_PIN_OD_FUNCTION(P9_0_SCB2_I2C_SCL)}, + {P10_0, I2C_1, CYHAL_PIN_OD_FUNCTION(P10_0_SCB1_I2C_SCL)}, + {P11_0, I2C_5, CYHAL_PIN_OD_FUNCTION(P11_0_SCB5_I2C_SCL)}, + {P12_0, I2C_6, CYHAL_PIN_OD_FUNCTION(P12_0_SCB6_I2C_SCL)}, + {P13_0, I2C_6, CYHAL_PIN_OD_FUNCTION(P13_0_SCB6_I2C_SCL)}, + {NC, NC, 0} +}; +const PinMap PinMap_I2C_SDA[] = { + {P0_3, I2C_0, CYHAL_PIN_OD_FUNCTION(P0_3_SCB0_I2C_SDA)}, + {P1_1, I2C_7, CYHAL_PIN_OD_FUNCTION(P1_1_SCB7_I2C_SDA)}, + {P2_1, I2C_1, CYHAL_PIN_OD_FUNCTION(P2_1_SCB1_I2C_SDA)}, + {P3_1, I2C_2, CYHAL_PIN_OD_FUNCTION(P3_1_SCB2_I2C_SDA)}, + {P4_1, I2C_7, CYHAL_PIN_OD_FUNCTION(P4_1_SCB7_I2C_SDA)}, + {P5_1, I2C_5, CYHAL_PIN_OD_FUNCTION(P5_1_SCB5_I2C_SDA)}, + {P6_1, I2C_3, CYHAL_PIN_OD_FUNCTION(P6_1_SCB3_I2C_SDA)}, + {P6_1, I2C_8, CYHAL_PIN_OD_FUNCTION(P6_1_SCB8_I2C_SDA)}, + {P6_5, I2C_6, CYHAL_PIN_OD_FUNCTION(P6_5_SCB6_I2C_SDA)}, + {P6_5, I2C_8, CYHAL_PIN_OD_FUNCTION(P6_5_SCB8_I2C_SDA)}, + {P7_1, I2C_4, CYHAL_PIN_OD_FUNCTION(P7_1_SCB4_I2C_SDA)}, + {P8_1, I2C_4, CYHAL_PIN_OD_FUNCTION(P8_1_SCB4_I2C_SDA)}, + {P9_1, I2C_2, CYHAL_PIN_OD_FUNCTION(P9_1_SCB2_I2C_SDA)}, + {P10_1, I2C_1, CYHAL_PIN_OD_FUNCTION(P10_1_SCB1_I2C_SDA)}, + {P11_1, I2C_5, CYHAL_PIN_OD_FUNCTION(P11_1_SCB5_I2C_SDA)}, + {P12_1, I2C_6, CYHAL_PIN_OD_FUNCTION(P12_1_SCB6_I2C_SDA)}, + {P13_1, I2C_6, CYHAL_PIN_OD_FUNCTION(P13_1_SCB6_I2C_SDA)}, + {NC, NC, 0} +}; +#endif // DEVICE_I2C + +#if DEVICE_SPI +//*** SPI *** +const PinMap PinMap_SPI_MOSI[] = { + {P0_2, SPI_0, CYHAL_PIN_OUT_FUNCTION(P0_2_SCB0_SPI_MOSI)}, + {P1_0, SPI_7, CYHAL_PIN_OUT_FUNCTION(P1_0_SCB7_SPI_MOSI)}, + {P2_0, SPI_1, CYHAL_PIN_OUT_FUNCTION(P2_0_SCB1_SPI_MOSI)}, + {P3_0, SPI_2, CYHAL_PIN_OUT_FUNCTION(P3_0_SCB2_SPI_MOSI)}, + {P4_0, SPI_7, CYHAL_PIN_OUT_FUNCTION(P4_0_SCB7_SPI_MOSI)}, + {P5_0, SPI_5, CYHAL_PIN_OUT_FUNCTION(P5_0_SCB5_SPI_MOSI)}, + {P6_0, SPI_3, CYHAL_PIN_OUT_FUNCTION(P6_0_SCB3_SPI_MOSI)}, + {P6_0, SPI_8, CYHAL_PIN_OUT_FUNCTION(P6_0_SCB8_SPI_MOSI)}, + {P6_4, SPI_6, CYHAL_PIN_OUT_FUNCTION(P6_4_SCB6_SPI_MOSI)}, + {P6_4, SPI_8, CYHAL_PIN_OUT_FUNCTION(P6_4_SCB8_SPI_MOSI)}, + {P7_0, SPI_4, CYHAL_PIN_OUT_FUNCTION(P7_0_SCB4_SPI_MOSI)}, + {P8_0, SPI_4, CYHAL_PIN_OUT_FUNCTION(P8_0_SCB4_SPI_MOSI)}, + {P9_0, SPI_2, CYHAL_PIN_OUT_FUNCTION(P9_0_SCB2_SPI_MOSI)}, + {P10_0, SPI_1, CYHAL_PIN_OUT_FUNCTION(P10_0_SCB1_SPI_MOSI)}, + {P11_0, SPI_5, CYHAL_PIN_OUT_FUNCTION(P11_0_SCB5_SPI_MOSI)}, + {P12_0, SPI_6, CYHAL_PIN_OUT_FUNCTION(P12_0_SCB6_SPI_MOSI)}, + {P13_0, SPI_6, CYHAL_PIN_OUT_FUNCTION(P13_0_SCB6_SPI_MOSI)}, + {NC, NC, 0} +}; +const PinMap PinMap_SPI_MISO[] = { + {P0_3, SPI_0, CYHAL_PIN_IN_FUNCTION(P0_3_SCB0_SPI_MISO)}, + {P1_1, SPI_7, CYHAL_PIN_IN_FUNCTION(P1_1_SCB7_SPI_MISO)}, + {P2_1, SPI_1, CYHAL_PIN_IN_FUNCTION(P2_1_SCB1_SPI_MISO)}, + {P3_1, SPI_2, CYHAL_PIN_IN_FUNCTION(P3_1_SCB2_SPI_MISO)}, + {P4_1, SPI_7, CYHAL_PIN_IN_FUNCTION(P4_1_SCB7_SPI_MISO)}, + {P5_1, SPI_5, CYHAL_PIN_IN_FUNCTION(P5_1_SCB5_SPI_MISO)}, + {P6_1, SPI_3, CYHAL_PIN_IN_FUNCTION(P6_1_SCB3_SPI_MISO)}, + {P6_1, SPI_8, CYHAL_PIN_IN_FUNCTION(P6_1_SCB8_SPI_MISO)}, + {P6_5, SPI_6, CYHAL_PIN_IN_FUNCTION(P6_5_SCB6_SPI_MISO)}, + {P6_5, SPI_8, CYHAL_PIN_IN_FUNCTION(P6_5_SCB8_SPI_MISO)}, + {P7_1, SPI_4, CYHAL_PIN_IN_FUNCTION(P7_1_SCB4_SPI_MISO)}, + {P8_1, SPI_4, CYHAL_PIN_IN_FUNCTION(P8_1_SCB4_SPI_MISO)}, + {P9_1, SPI_2, CYHAL_PIN_IN_FUNCTION(P9_1_SCB2_SPI_MISO)}, + {P10_1, SPI_1, CYHAL_PIN_IN_FUNCTION(P10_1_SCB1_SPI_MISO)}, + {P11_1, SPI_5, CYHAL_PIN_IN_FUNCTION(P11_1_SCB5_SPI_MISO)}, + {P12_1, SPI_6, CYHAL_PIN_IN_FUNCTION(P12_1_SCB6_SPI_MISO)}, + {P13_1, SPI_6, CYHAL_PIN_IN_FUNCTION(P13_1_SCB6_SPI_MISO)}, + {NC, NC, 0} +}; +const PinMap PinMap_SPI_SCLK[] = { + {P0_4, SPI_0, CYHAL_PIN_OUT_FUNCTION(P0_4_SCB0_SPI_CLK)}, + {P1_2, SPI_7, CYHAL_PIN_OUT_FUNCTION(P1_2_SCB7_SPI_CLK)}, + {P2_2, SPI_1, CYHAL_PIN_OUT_FUNCTION(P2_2_SCB1_SPI_CLK)}, + {P3_2, SPI_2, CYHAL_PIN_OUT_FUNCTION(P3_2_SCB2_SPI_CLK)}, + {P5_2, SPI_5, CYHAL_PIN_OUT_FUNCTION(P5_2_SCB5_SPI_CLK)}, + {P6_2, SPI_3, CYHAL_PIN_OUT_FUNCTION(P6_2_SCB3_SPI_CLK)}, + {P6_2, SPI_8, CYHAL_PIN_OUT_FUNCTION(P6_2_SCB8_SPI_CLK)}, + {P6_6, SPI_6, CYHAL_PIN_OUT_FUNCTION(P6_6_SCB6_SPI_CLK)}, + {P6_6, SPI_8, CYHAL_PIN_OUT_FUNCTION(P6_6_SCB8_SPI_CLK)}, + {P7_2, SPI_4, CYHAL_PIN_OUT_FUNCTION(P7_2_SCB4_SPI_CLK)}, + {P8_2, SPI_4, CYHAL_PIN_OUT_FUNCTION(P8_2_SCB4_SPI_CLK)}, + {P9_2, SPI_2, CYHAL_PIN_OUT_FUNCTION(P9_2_SCB2_SPI_CLK)}, + {P10_2, SPI_1, CYHAL_PIN_OUT_FUNCTION(P10_2_SCB1_SPI_CLK)}, + {P11_2, SPI_5, CYHAL_PIN_OUT_FUNCTION(P11_2_SCB5_SPI_CLK)}, + {P12_2, SPI_6, CYHAL_PIN_OUT_FUNCTION(P12_2_SCB6_SPI_CLK)}, + {NC, NC, 0} +}; +const PinMap PinMap_SPI_SSEL[] = { + {P0_5, SPI_0, CYHAL_PIN_OUT_FUNCTION(P0_5_SCB0_SPI_SELECT0)}, + {P1_3, SPI_7, CYHAL_PIN_OUT_FUNCTION(P1_3_SCB7_SPI_SELECT0)}, + {P2_3, SPI_1, CYHAL_PIN_OUT_FUNCTION(P2_3_SCB1_SPI_SELECT0)}, + {P3_3, SPI_2, CYHAL_PIN_OUT_FUNCTION(P3_3_SCB2_SPI_SELECT0)}, + {P5_3, SPI_5, CYHAL_PIN_OUT_FUNCTION(P5_3_SCB5_SPI_SELECT0)}, + {P6_3, SPI_3, CYHAL_PIN_OUT_FUNCTION(P6_3_SCB3_SPI_SELECT0)}, + {P6_3, SPI_8, CYHAL_PIN_OUT_FUNCTION(P6_3_SCB8_SPI_SELECT0)}, + {P6_7, SPI_6, CYHAL_PIN_OUT_FUNCTION(P6_7_SCB6_SPI_SELECT0)}, + {P6_7, SPI_8, CYHAL_PIN_OUT_FUNCTION(P6_7_SCB8_SPI_SELECT0)}, + {P7_3, SPI_4, CYHAL_PIN_OUT_FUNCTION(P7_3_SCB4_SPI_SELECT0)}, + {P8_3, SPI_4, CYHAL_PIN_OUT_FUNCTION(P8_3_SCB4_SPI_SELECT0)}, + {P9_3, SPI_2, CYHAL_PIN_OUT_FUNCTION(P9_3_SCB2_SPI_SELECT0)}, + {P10_3, SPI_1, CYHAL_PIN_OUT_FUNCTION(P10_3_SCB1_SPI_SELECT0)}, + {P11_3, SPI_5, CYHAL_PIN_OUT_FUNCTION(P11_3_SCB5_SPI_SELECT0)}, + {P12_3, SPI_6, CYHAL_PIN_OUT_FUNCTION(P12_3_SCB6_SPI_SELECT0)}, + {NC, NC, 0} +}; +#endif // DEVICE_SPI + +#if DEVICE_PWMOUT +//*** PWM *** +const PinMap PinMap_PWM_OUT[] = { + // 16-bit PWM outputs + {P0_0, PWM_16b_0, CYHAL_PIN_OUT_FUNCTION(P0_0_TCPWM1_LINE0)}, + {P0_2, PWM_16b_1, CYHAL_PIN_OUT_FUNCTION(P0_2_TCPWM1_LINE1)}, + {P0_4, PWM_16b_2, CYHAL_PIN_OUT_FUNCTION(P0_4_TCPWM1_LINE2)}, + {P1_0, PWM_16b_3, CYHAL_PIN_OUT_FUNCTION(P1_0_TCPWM1_LINE3)}, + {P1_2, PWM_16b_12, CYHAL_PIN_OUT_FUNCTION(P1_2_TCPWM1_LINE12)}, + {P1_4, PWM_16b_13, CYHAL_PIN_OUT_FUNCTION(P1_4_TCPWM1_LINE13)}, + {P2_0, PWM_16b_15, CYHAL_PIN_OUT_FUNCTION(P2_0_TCPWM1_LINE15)}, + {P2_2, PWM_16b_16, CYHAL_PIN_OUT_FUNCTION(P2_2_TCPWM1_LINE16)}, + {P2_4, PWM_16b_17, CYHAL_PIN_OUT_FUNCTION(P2_4_TCPWM1_LINE17)}, + {P2_6, PWM_16b_18, CYHAL_PIN_OUT_FUNCTION(P2_6_TCPWM1_LINE18)}, + {P3_0, PWM_16b_19, CYHAL_PIN_OUT_FUNCTION(P3_0_TCPWM1_LINE19)}, + {P3_2, PWM_16b_20, CYHAL_PIN_OUT_FUNCTION(P3_2_TCPWM1_LINE20)}, + {P3_4, PWM_16b_21, CYHAL_PIN_OUT_FUNCTION(P3_4_TCPWM1_LINE21)}, + {P4_0, PWM_16b_22, CYHAL_PIN_OUT_FUNCTION(P4_0_TCPWM1_LINE22)}, + {P5_0, PWM_16b_4, CYHAL_PIN_OUT_FUNCTION(P5_0_TCPWM1_LINE4)}, + {P5_2, PWM_16b_5, CYHAL_PIN_OUT_FUNCTION(P5_2_TCPWM1_LINE5)}, + {P5_4, PWM_16b_6, CYHAL_PIN_OUT_FUNCTION(P5_4_TCPWM1_LINE6)}, + {P5_6, PWM_16b_7, CYHAL_PIN_OUT_FUNCTION(P5_6_TCPWM1_LINE7)}, + {P6_0, PWM_16b_8, CYHAL_PIN_OUT_FUNCTION(P6_0_TCPWM1_LINE8)}, + {P6_2, PWM_16b_9, CYHAL_PIN_OUT_FUNCTION(P6_2_TCPWM1_LINE9)}, + {P6_4, PWM_16b_10, CYHAL_PIN_OUT_FUNCTION(P6_4_TCPWM1_LINE10)}, + {P6_6, PWM_16b_11, CYHAL_PIN_OUT_FUNCTION(P6_6_TCPWM1_LINE11)}, + {P7_0, PWM_16b_12, CYHAL_PIN_OUT_FUNCTION(P7_0_TCPWM1_LINE12)}, + {P7_2, PWM_16b_13, CYHAL_PIN_OUT_FUNCTION(P7_2_TCPWM1_LINE13)}, + {P7_4, PWM_16b_14, CYHAL_PIN_OUT_FUNCTION(P7_4_TCPWM1_LINE14)}, + {P7_6, PWM_16b_15, CYHAL_PIN_OUT_FUNCTION(P7_6_TCPWM1_LINE15)}, + {P8_0, PWM_16b_16, CYHAL_PIN_OUT_FUNCTION(P8_0_TCPWM1_LINE16)}, + {P8_2, PWM_16b_17, CYHAL_PIN_OUT_FUNCTION(P8_2_TCPWM1_LINE17)}, + {P8_4, PWM_16b_18, CYHAL_PIN_OUT_FUNCTION(P8_4_TCPWM1_LINE18)}, + {P8_6, PWM_16b_19, CYHAL_PIN_OUT_FUNCTION(P8_6_TCPWM1_LINE19)}, + {P9_0, PWM_16b_20, CYHAL_PIN_OUT_FUNCTION(P9_0_TCPWM1_LINE20)}, + {P9_2, PWM_16b_21, CYHAL_PIN_OUT_FUNCTION(P9_2_TCPWM1_LINE21)}, + {P9_4, PWM_16b_0, CYHAL_PIN_OUT_FUNCTION(P9_4_TCPWM1_LINE0)}, + {P9_6, PWM_16b_1, CYHAL_PIN_OUT_FUNCTION(P9_6_TCPWM1_LINE1)}, + {P10_0, PWM_16b_22, CYHAL_PIN_OUT_FUNCTION(P10_0_TCPWM1_LINE22)}, + {P10_2, PWM_16b_23, CYHAL_PIN_OUT_FUNCTION(P10_2_TCPWM1_LINE23)}, + {P10_4, PWM_16b_0, CYHAL_PIN_OUT_FUNCTION(P10_4_TCPWM1_LINE0)}, + {P10_6, PWM_16b_2, CYHAL_PIN_OUT_FUNCTION(P10_6_TCPWM1_LINE2)}, + {P11_0, PWM_16b_1, CYHAL_PIN_OUT_FUNCTION(P11_0_TCPWM1_LINE1)}, + {P11_2, PWM_16b_2, CYHAL_PIN_OUT_FUNCTION(P11_2_TCPWM1_LINE2)}, + {P11_4, PWM_16b_3, CYHAL_PIN_OUT_FUNCTION(P11_4_TCPWM1_LINE3)}, + {P12_0, PWM_16b_4, CYHAL_PIN_OUT_FUNCTION(P12_0_TCPWM1_LINE4)}, + {P12_2, PWM_16b_5, CYHAL_PIN_OUT_FUNCTION(P12_2_TCPWM1_LINE5)}, + {P12_4, PWM_16b_6, CYHAL_PIN_OUT_FUNCTION(P12_4_TCPWM1_LINE6)}, + {P12_6, PWM_16b_7, CYHAL_PIN_OUT_FUNCTION(P12_6_TCPWM1_LINE7)}, + {P13_0, PWM_16b_8, CYHAL_PIN_OUT_FUNCTION(P13_0_TCPWM1_LINE8)}, + {P13_2, PWM_16b_9, CYHAL_PIN_OUT_FUNCTION(P13_2_TCPWM1_LINE9)}, + {P13_4, PWM_16b_10, CYHAL_PIN_OUT_FUNCTION(P13_4_TCPWM1_LINE10)}, + {P13_6, PWM_16b_11, CYHAL_PIN_OUT_FUNCTION(P13_6_TCPWM1_LINE11)}, + // 16-bit PWM inverted outputs + {P0_1, PWM_16b_0, CYHAL_PIN_OUT_FUNCTION(P0_1_TCPWM1_LINE_COMPL0)}, + {P0_3, PWM_16b_1, CYHAL_PIN_OUT_FUNCTION(P0_3_TCPWM1_LINE_COMPL1)}, + {P0_5, PWM_16b_2, CYHAL_PIN_OUT_FUNCTION(P0_5_TCPWM1_LINE_COMPL2)}, + {P1_1, PWM_16b_3, CYHAL_PIN_OUT_FUNCTION(P1_1_TCPWM1_LINE_COMPL3)}, + {P1_3, PWM_16b_12, CYHAL_PIN_OUT_FUNCTION(P1_3_TCPWM1_LINE_COMPL12)}, + {P1_5, PWM_16b_14, CYHAL_PIN_OUT_FUNCTION(P1_5_TCPWM1_LINE_COMPL14)}, + {P2_1, PWM_16b_15, CYHAL_PIN_OUT_FUNCTION(P2_1_TCPWM1_LINE_COMPL15)}, + {P2_3, PWM_16b_16, CYHAL_PIN_OUT_FUNCTION(P2_3_TCPWM1_LINE_COMPL16)}, + {P2_5, PWM_16b_17, CYHAL_PIN_OUT_FUNCTION(P2_5_TCPWM1_LINE_COMPL17)}, + {P2_7, PWM_16b_18, CYHAL_PIN_OUT_FUNCTION(P2_7_TCPWM1_LINE_COMPL18)}, + {P3_1, PWM_16b_19, CYHAL_PIN_OUT_FUNCTION(P3_1_TCPWM1_LINE_COMPL19)}, + {P3_3, PWM_16b_20, CYHAL_PIN_OUT_FUNCTION(P3_3_TCPWM1_LINE_COMPL20)}, + {P3_5, PWM_16b_21, CYHAL_PIN_OUT_FUNCTION(P3_5_TCPWM1_LINE_COMPL21)}, + {P4_1, PWM_16b_22, CYHAL_PIN_OUT_FUNCTION(P4_1_TCPWM1_LINE_COMPL22)}, + {P5_1, PWM_16b_4, CYHAL_PIN_OUT_FUNCTION(P5_1_TCPWM1_LINE_COMPL4)}, + {P5_3, PWM_16b_5, CYHAL_PIN_OUT_FUNCTION(P5_3_TCPWM1_LINE_COMPL5)}, + {P5_5, PWM_16b_6, CYHAL_PIN_OUT_FUNCTION(P5_5_TCPWM1_LINE_COMPL6)}, + {P5_7, PWM_16b_7, CYHAL_PIN_OUT_FUNCTION(P5_7_TCPWM1_LINE_COMPL7)}, + {P6_1, PWM_16b_8, CYHAL_PIN_OUT_FUNCTION(P6_1_TCPWM1_LINE_COMPL8)}, + {P6_3, PWM_16b_9, CYHAL_PIN_OUT_FUNCTION(P6_3_TCPWM1_LINE_COMPL9)}, + {P6_5, PWM_16b_10, CYHAL_PIN_OUT_FUNCTION(P6_5_TCPWM1_LINE_COMPL10)}, + {P6_7, PWM_16b_11, CYHAL_PIN_OUT_FUNCTION(P6_7_TCPWM1_LINE_COMPL11)}, + {P7_1, PWM_16b_12, CYHAL_PIN_OUT_FUNCTION(P7_1_TCPWM1_LINE_COMPL12)}, + {P7_3, PWM_16b_13, CYHAL_PIN_OUT_FUNCTION(P7_3_TCPWM1_LINE_COMPL13)}, + {P7_5, PWM_16b_14, CYHAL_PIN_OUT_FUNCTION(P7_5_TCPWM1_LINE_COMPL14)}, + {P7_7, PWM_16b_15, CYHAL_PIN_OUT_FUNCTION(P7_7_TCPWM1_LINE_COMPL15)}, + {P8_1, PWM_16b_16, CYHAL_PIN_OUT_FUNCTION(P8_1_TCPWM1_LINE_COMPL16)}, + {P8_3, PWM_16b_17, CYHAL_PIN_OUT_FUNCTION(P8_3_TCPWM1_LINE_COMPL17)}, + {P8_5, PWM_16b_18, CYHAL_PIN_OUT_FUNCTION(P8_5_TCPWM1_LINE_COMPL18)}, + {P8_7, PWM_16b_19, CYHAL_PIN_OUT_FUNCTION(P8_7_TCPWM1_LINE_COMPL19)}, + {P9_1, PWM_16b_20, CYHAL_PIN_OUT_FUNCTION(P9_1_TCPWM1_LINE_COMPL20)}, + {P9_3, PWM_16b_21, CYHAL_PIN_OUT_FUNCTION(P9_3_TCPWM1_LINE_COMPL21)}, + {P9_5, PWM_16b_0, CYHAL_PIN_OUT_FUNCTION(P9_5_TCPWM1_LINE_COMPL0)}, + {P9_7, PWM_16b_1, CYHAL_PIN_OUT_FUNCTION(P9_7_TCPWM1_LINE_COMPL1)}, + {P10_1, PWM_16b_22, CYHAL_PIN_OUT_FUNCTION(P10_1_TCPWM1_LINE_COMPL22)}, + {P10_3, PWM_16b_23, CYHAL_PIN_OUT_FUNCTION(P10_3_TCPWM1_LINE_COMPL23)}, + {P10_5, PWM_16b_0, CYHAL_PIN_OUT_FUNCTION(P10_5_TCPWM1_LINE_COMPL0)}, + {P10_7, PWM_16b_2, CYHAL_PIN_OUT_FUNCTION(P10_7_TCPWM1_LINE_COMPL2)}, + {P11_1, PWM_16b_1, CYHAL_PIN_OUT_FUNCTION(P11_1_TCPWM1_LINE_COMPL1)}, + {P11_3, PWM_16b_2, CYHAL_PIN_OUT_FUNCTION(P11_3_TCPWM1_LINE_COMPL2)}, + {P11_5, PWM_16b_3, CYHAL_PIN_OUT_FUNCTION(P11_5_TCPWM1_LINE_COMPL3)}, + {P12_1, PWM_16b_4, CYHAL_PIN_OUT_FUNCTION(P12_1_TCPWM1_LINE_COMPL4)}, + {P12_3, PWM_16b_5, CYHAL_PIN_OUT_FUNCTION(P12_3_TCPWM1_LINE_COMPL5)}, + {P12_5, PWM_16b_6, CYHAL_PIN_OUT_FUNCTION(P12_5_TCPWM1_LINE_COMPL6)}, + {P12_7, PWM_16b_7, CYHAL_PIN_OUT_FUNCTION(P12_7_TCPWM1_LINE_COMPL7)}, + {P13_1, PWM_16b_8, CYHAL_PIN_OUT_FUNCTION(P13_1_TCPWM1_LINE_COMPL8)}, + {P13_3, PWM_16b_9, CYHAL_PIN_OUT_FUNCTION(P13_3_TCPWM1_LINE_COMPL9)}, + {P13_5, PWM_16b_10, CYHAL_PIN_OUT_FUNCTION(P13_5_TCPWM1_LINE_COMPL10)}, + {P13_7, PWM_16b_11, CYHAL_PIN_OUT_FUNCTION(P13_7_TCPWM1_LINE_COMPL11)}, + // 32-bit PWM outputs + {P0_0, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P0_0_TCPWM0_LINE0)}, + {P0_2, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P0_2_TCPWM0_LINE1)}, + {P0_4, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P0_4_TCPWM0_LINE2)}, + {P1_0, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P1_0_TCPWM0_LINE3)}, + {P1_2, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P1_2_TCPWM0_LINE4)}, + {P1_4, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P1_4_TCPWM0_LINE5)}, + {P2_0, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P2_0_TCPWM0_LINE6)}, + {P2_2, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P2_2_TCPWM0_LINE7)}, + {P2_4, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P2_4_TCPWM0_LINE0)}, + {P2_6, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P2_6_TCPWM0_LINE1)}, + {P3_0, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P3_0_TCPWM0_LINE2)}, + {P3_2, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P3_2_TCPWM0_LINE3)}, + {P3_4, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P3_4_TCPWM0_LINE4)}, + {P4_0, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P4_0_TCPWM0_LINE5)}, + {P5_0, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P5_0_TCPWM0_LINE4)}, + {P5_2, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P5_2_TCPWM0_LINE5)}, + {P5_4, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P5_4_TCPWM0_LINE6)}, + {P5_6, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P5_6_TCPWM0_LINE7)}, + {P6_0, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P6_0_TCPWM0_LINE0)}, + {P6_2, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P6_2_TCPWM0_LINE1)}, + {P6_4, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P6_4_TCPWM0_LINE2)}, + {P6_6, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P6_6_TCPWM0_LINE3)}, + {P7_0, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P7_0_TCPWM0_LINE4)}, + {P7_2, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P7_2_TCPWM0_LINE5)}, + {P7_4, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P7_4_TCPWM0_LINE6)}, + {P7_6, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P7_6_TCPWM0_LINE7)}, + {P8_0, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P8_0_TCPWM0_LINE0)}, + {P8_2, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P8_2_TCPWM0_LINE1)}, + {P8_4, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P8_4_TCPWM0_LINE2)}, + {P8_6, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P8_6_TCPWM0_LINE3)}, + {P9_0, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P9_0_TCPWM0_LINE4)}, + {P9_2, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P9_2_TCPWM0_LINE5)}, + {P9_4, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P9_4_TCPWM0_LINE7)}, + {P9_6, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P9_6_TCPWM0_LINE0)}, + {P10_0, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P10_0_TCPWM0_LINE6)}, + {P10_2, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P10_2_TCPWM0_LINE7)}, + {P10_4, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P10_4_TCPWM0_LINE0)}, + {P10_6, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P10_6_TCPWM0_LINE1)}, + {P11_0, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P11_0_TCPWM0_LINE1)}, + {P11_2, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P11_2_TCPWM0_LINE2)}, + {P11_4, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P11_4_TCPWM0_LINE3)}, + {P12_0, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P12_0_TCPWM0_LINE4)}, + {P12_2, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P12_2_TCPWM0_LINE5)}, + {P12_4, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P12_4_TCPWM0_LINE6)}, + {P12_6, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P12_6_TCPWM0_LINE7)}, + {P13_0, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P13_0_TCPWM0_LINE0)}, + {P13_2, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P13_2_TCPWM0_LINE1)}, + {P13_4, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P13_4_TCPWM0_LINE2)}, + {P13_6, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P13_6_TCPWM0_LINE3)}, + // 32-bit PWM inverted outputs + {P0_1, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P0_1_TCPWM0_LINE_COMPL0)}, + {P0_3, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P0_3_TCPWM0_LINE_COMPL1)}, + {P0_5, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P0_5_TCPWM0_LINE_COMPL2)}, + {P1_1, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P1_1_TCPWM0_LINE_COMPL3)}, + {P1_3, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P1_3_TCPWM0_LINE_COMPL4)}, + {P1_5, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P1_5_TCPWM0_LINE_COMPL5)}, + {P2_1, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P2_1_TCPWM0_LINE_COMPL6)}, + {P2_3, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P2_3_TCPWM0_LINE_COMPL7)}, + {P2_5, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P2_5_TCPWM0_LINE_COMPL0)}, + {P2_7, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P2_7_TCPWM0_LINE_COMPL1)}, + {P3_1, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P3_1_TCPWM0_LINE_COMPL2)}, + {P3_3, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P3_3_TCPWM0_LINE_COMPL3)}, + {P3_5, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P3_5_TCPWM0_LINE_COMPL4)}, + {P4_1, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P4_1_TCPWM0_LINE_COMPL5)}, + {P5_1, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P5_1_TCPWM0_LINE_COMPL4)}, + {P5_3, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P5_3_TCPWM0_LINE_COMPL5)}, + {P5_5, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P5_5_TCPWM0_LINE_COMPL6)}, + {P5_7, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P5_7_TCPWM0_LINE_COMPL7)}, + {P6_1, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P6_1_TCPWM0_LINE_COMPL0)}, + {P6_3, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P6_3_TCPWM0_LINE_COMPL1)}, + {P6_5, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P6_5_TCPWM0_LINE_COMPL2)}, + {P6_7, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P6_7_TCPWM0_LINE_COMPL3)}, + {P7_1, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P7_1_TCPWM0_LINE_COMPL4)}, + {P7_3, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P7_3_TCPWM0_LINE_COMPL5)}, + {P7_5, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P7_5_TCPWM0_LINE_COMPL6)}, + {P7_7, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P7_7_TCPWM0_LINE_COMPL7)}, + {P8_1, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P8_1_TCPWM0_LINE_COMPL0)}, + {P8_3, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P8_3_TCPWM0_LINE_COMPL1)}, + {P8_5, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P8_5_TCPWM0_LINE_COMPL2)}, + {P8_7, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P8_7_TCPWM0_LINE_COMPL3)}, + {P9_1, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P9_1_TCPWM0_LINE_COMPL4)}, + {P9_3, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P9_3_TCPWM0_LINE_COMPL5)}, + {P9_5, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P9_5_TCPWM0_LINE_COMPL7)}, + {P9_7, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P9_7_TCPWM0_LINE_COMPL0)}, + {P10_1, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P10_1_TCPWM0_LINE_COMPL6)}, + {P10_3, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P10_3_TCPWM0_LINE_COMPL7)}, + {P10_5, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P10_5_TCPWM0_LINE_COMPL0)}, + {P10_7, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P10_7_TCPWM0_LINE_COMPL1)}, + {P11_1, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P11_1_TCPWM0_LINE_COMPL1)}, + {P11_3, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P11_3_TCPWM0_LINE_COMPL2)}, + {P11_5, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P11_5_TCPWM0_LINE_COMPL3)}, + {P12_1, PWM_32b_4, CYHAL_PIN_OUT_FUNCTION(P12_1_TCPWM0_LINE_COMPL4)}, + {P12_3, PWM_32b_5, CYHAL_PIN_OUT_FUNCTION(P12_3_TCPWM0_LINE_COMPL5)}, + {P12_5, PWM_32b_6, CYHAL_PIN_OUT_FUNCTION(P12_5_TCPWM0_LINE_COMPL6)}, + {P12_7, PWM_32b_7, CYHAL_PIN_OUT_FUNCTION(P12_7_TCPWM0_LINE_COMPL7)}, + {P13_1, PWM_32b_0, CYHAL_PIN_OUT_FUNCTION(P13_1_TCPWM0_LINE_COMPL0)}, + {P13_3, PWM_32b_1, CYHAL_PIN_OUT_FUNCTION(P13_3_TCPWM0_LINE_COMPL1)}, + {P13_5, PWM_32b_2, CYHAL_PIN_OUT_FUNCTION(P13_5_TCPWM0_LINE_COMPL2)}, + {P13_7, PWM_32b_3, CYHAL_PIN_OUT_FUNCTION(P13_7_TCPWM0_LINE_COMPL3)}, + {NC, NC, 0} +}; +#endif // DEVICE_PWMOUT + +#if DEVICE_ANALOGIN +const PinMap PinMap_ADC[] = { + {P10_0, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_1, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_2, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_3, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_4, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_5, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_6, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {P10_7, ADC_0, CYHAL_PIN_ANALOG_FUNCTION(HSIOM_SEL_GPIO)}, + {NC, NC, 0} +}; +#endif // DEVICE_ANALOGIN + +#if DEVICE_QSPI +const PinMap PinMap_QSPI_SCLK[] = { + {P11_7, QSPI_0, CY_GPIO_CFG_CREATE(P11_7_SMIF_SPI_CLK, CY_GPIO_DM_STRONG_IN_OFF)}, + {NC, NC, 0}, +}; +const PinMap PinMap_QSPI_SSEL[] = { + {P11_2, QSPI_0, CY_GPIO_CFG_CREATE(P11_2_SMIF_SPI_SELECT0, CY_GPIO_DM_STRONG_IN_OFF)}, + {NC, NC, 0}, +}; +const PinMap PinMap_QSPI_DATA0[] = { + {P11_6, QSPI_0, CY_GPIO_CFG_CREATE(P11_6_SMIF_SPI_DATA0, CY_GPIO_DM_STRONG)}, + {NC, NC, 0}, +}; +const PinMap PinMap_QSPI_DATA1[] = { + {P11_5, QSPI_0, CY_GPIO_CFG_CREATE(P11_5_SMIF_SPI_DATA1, CY_GPIO_DM_STRONG)}, + {NC, NC, 0}, +}; +const PinMap PinMap_QSPI_DATA2[] = { + {P11_4, QSPI_0, CY_GPIO_CFG_CREATE(P11_4_SMIF_SPI_DATA2, CY_GPIO_DM_STRONG)}, + {NC, NC, 0}, +}; +const PinMap PinMap_QSPI_DATA3[] = { + {P11_3, QSPI_0, CY_GPIO_CFG_CREATE(P11_3_SMIF_SPI_DATA3, CY_GPIO_DM_STRONG)}, + {NC, NC, 0}, +}; +#endif // DEVICE_QSPI diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PinNames.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PinNames.h new file mode 100644 index 0000000000..88b383965c --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/PinNames.h @@ -0,0 +1,80 @@ +/* + * mbed Microcontroller Library + * Copyright (c) 2017-2018 Future Electronics + * Copyright (c) 2019 Cypress Semiconductor Corporation + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "PinNamesTypes.h" +#include "cyhal_pin_package.h" + +// Generic signal names + +#define I2C_SCL P6_0 +#define I2C_SDA P6_1 + +#define SPI_MOSI P12_0 +#define SPI_MISO P12_1 +#define SPI_CLK P12_2 +#define SPI_CS P12_4 + +#define UART_RX P5_0 +#define UART_TX P5_1 +#define UART_RTS P5_2 +#define UART_CTS P5_3 + +#define LED1 P0_3 +#define LED2 P11_1 +#define LED3 P1_1 +#define LED4 P1_5 +#define LED5 P13_7 +#define LED_RED LED1 +#define LED_BLUE LED2 +#define LED_GREEN LED3 + +// Reset pin unavailable +#define SWITCH2 P0_4 +#define USER_BUTTON SWITCH2 +#define BUTTON1 USER_BUTTON + +#define QSPI_CLK P11_7 +#define QSPI_IO_0 P11_6 +#define QSPI_IO_1 P11_5 +#define QSPI_IO_2 P11_4 +#define QSPI_IO_3 P11_3 +#define QSPI_SEL P11_2 + +#define QSPI_FLASH1_IO0 QSPI_IO_0 +#define QSPI_FLASH1_IO1 QSPI_IO_1 +#define QSPI_FLASH1_IO2 QSPI_IO_2 +#define QSPI_FLASH1_IO3 QSPI_IO_3 +#define QSPI_FLASH1_SCK QSPI_CLK +#define QSPI_FLASH1_CSN QSPI_SEL + +// Standardized interfaces names +#define STDIO_UART_TX UART_TX +#define STDIO_UART_RX UART_RX +#define STDIO_UART_CTS UART_CTS +#define STDIO_UART_RTS UART_RTS + +#define USBTX UART_TX +#define USBRX UART_RX + +#define AOUT P9_6 + +#endif diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp.c new file mode 100644 index 0000000000..2bf2b2f642 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp.c @@ -0,0 +1,124 @@ +/***************************************************************************//** +* \file cybsp.c +* +* Description: +* Provides initialization code for starting up the hardware contained on the +* Cypress board. +* +******************************************************************************** +* \copyright +* Copyright 2018-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + +#include +#include "cybsp.h" +#if defined(CY_USING_HAL) +#include "cyhal_utils.h" +#endif + +#if defined(__cplusplus) +extern "C" { +#endif + +/* The sysclk deep sleep callback is recommended to be the last callback that +* is executed before entry into deep sleep mode and the first one upon +* exit the deep sleep mode. +* Doing so minimizes the time spent on low power mode entry and exit. +*/ +#ifndef CYBSP_SYSCLK_PM_CALLBACK_ORDER + #define CYBSP_SYSCLK_PM_CALLBACK_ORDER (255u) +#endif + +#if defined(CYBSP_WIFI_CAPABLE) && defined(CY_USING_HAL) +static cyhal_sdio_t sdio_obj; + +cyhal_sdio_t* cybsp_get_wifi_sdio_obj(void) +{ + return &sdio_obj; +} +#endif + +/** + * Registers a power management callback that prepares the clock system + * for entering deep sleep mode and restore the clocks upon wakeup from deep sleep. + * NOTE: This is called automatically as part of \ref cybsp_init + */ +static cy_rslt_t cybsp_register_sysclk_pm_callback(void) +{ + cy_rslt_t result = CY_RSLT_SUCCESS; + static cy_stc_syspm_callback_params_t cybsp_sysclk_pm_callback_param = {NULL, NULL}; + static cy_stc_syspm_callback_t cybsp_sysclk_pm_callback = { + .callback = &Cy_SysClk_DeepSleepCallback, + .type = CY_SYSPM_DEEPSLEEP, + .callbackParams = &cybsp_sysclk_pm_callback_param, + .order = CYBSP_SYSCLK_PM_CALLBACK_ORDER + }; + + if (!Cy_SysPm_RegisterCallback(&cybsp_sysclk_pm_callback)) + { + result = CYBSP_RSLT_ERR_SYSCLK_PM_CALLBACK; + } + return result; +} + +cy_rslt_t cybsp_init(void) +{ + /* Setup hardware manager to track resource usage then initialize all system (clock/power) board configuration */ +#if defined(CY_USING_HAL) + cy_rslt_t result = cyhal_hwmgr_init(); +#else + cy_rslt_t result = CY_RSLT_SUCCESS; +#endif + + init_cycfg_system(); + + if (CY_RSLT_SUCCESS == result) + { + result = cybsp_register_sysclk_pm_callback(); + } + +#if defined(CYBSP_WIFI_CAPABLE) && defined(CY_USING_HAL) + /* Initialize SDIO interface. This must be done before other HAL API calls as some SDIO implementations require + * specific peripheral instances. + * NOTE: The full WiFi interface still needs to be initialized via cybsp_wifi_init_primary(). This is typically + * done when starting up WiFi. + */ + if (CY_RSLT_SUCCESS == result) + { + /* Reserves: CYBSP_WIFI_SDIO, CYBSP_WIFI_SDIO_D0, CYBSP_WIFI_SDIO_D1, CYBSP_WIFI_SDIO_D2, CYBSP_WIFI_SDIO_D3 + * CYBSP_WIFI_SDIO_CMD and CYBSP_WIFI_SDIO_CLK. + */ + result = cyhal_sdio_init( + &sdio_obj, + CYBSP_WIFI_SDIO_CMD, + CYBSP_WIFI_SDIO_CLK, + CYBSP_WIFI_SDIO_D0, + CYBSP_WIFI_SDIO_D1, + CYBSP_WIFI_SDIO_D2, + CYBSP_WIFI_SDIO_D3); + } +#endif /* defined(CYBSP_WIFI_CAPABLE) */ + + /* CYHAL_HWMGR_RSLT_ERR_INUSE error code could be returned if any needed for BSP resource was reserved by + * user previously. Please review the Device Configurator (design.modus) and the BSP reservation list + * (cyreservedresources.list) to make sure no resources are reserved by both. + */ + return result; +} + +#if defined(__cplusplus) +} +#endif diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp.h new file mode 100644 index 0000000000..80ab3c2a1d --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp.h @@ -0,0 +1,74 @@ +/***************************************************************************//** +* \file cybsp.h +* +* \brief +* Basic API for setting up boards containing a Cypress MCU. +* +******************************************************************************** +* \copyright +* Copyright 2018-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + +#pragma once + +#include "cy_result.h" +#include "cybsp_types.h" +#include "cycfg.h" +#if defined(CYBSP_WIFI_CAPABLE) && defined(CY_USING_HAL) +#include "cyhal_sdio.h" +#endif + +#if defined(__cplusplus) +extern "C" { +#endif + +/** +* \addtogroup group_bsp_macros Macros +* \{ +*/ + +/** Failed to configure sysclk power management callback */ +#define CYBSP_RSLT_ERR_SYSCLK_PM_CALLBACK (CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_BSP, 0)) + +/** \} group_bsp_macros */ + +/** +* \addtogroup group_bsp_functions Functions +* \{ +*/ + +/** + * \brief Initialize all hardware on the board + * \returns CY_RSLT_SUCCESS if the board is sucessfully initialized, if there is + * a problem initializing any hardware it returns an error code specific + * to the hardware module that had a problem. + */ +cy_rslt_t cybsp_init(void); + +#if defined(CYBSP_WIFI_CAPABLE) && defined(CY_USING_HAL) +/** + * \brief Get the initialized sdio object used for communicating with the WiFi Chip. + * \note This function should only be called after cybsp_init(); + * \returns The initialized sdio object. + */ +cyhal_sdio_t* cybsp_get_wifi_sdio_obj(void); +#endif /* defined(CYBSP_WIFI_CAPABLE) */ + +/** \} group_bsp_functions */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp_types.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp_types.h new file mode 100644 index 0000000000..99ff9a77ee --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/cybsp_types.h @@ -0,0 +1,243 @@ +/***************************************************************************//** +* \file CY8CKIT-064S2-4343W/cybsp_types.h +* +* Description: +* Provides APIs for interacting with the hardware contained on the Cypress +* CY8CKIT-064S2-4343W pioneer kit. +* +******************************************************************************** +* \copyright +* Copyright 2018-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + +#pragma once + +#if defined(CY_USING_HAL) +#include "cyhal_pin_package.h" +#endif + +#if defined(__cplusplus) +extern "C" { +#endif + + +/** +* \addtogroup group_bsp_pin_state Pin States +* \{ +*/ + +/** Pin state for the LED on. */ +#define CYBSP_LED_STATE_ON (0U) +/** Pin state for the LED off. */ +#define CYBSP_LED_STATE_OFF (1U) + +/** Pin state for when a button is pressed. */ +#define CYBSP_BTN_PRESSED (0U) +/** Pin state for when a button is released. */ +#define CYBSP_BTN_OFF (1U) + +/** \} group_bsp_pin_state */ + +#if defined(CY_USING_HAL) + +/** +* \addtogroup group_bsp_pins Pin Mappings +* \{ +*/ + +/** +* \addtogroup group_bsp_pins_led LED Pins +* \{ +*/ + +/** LED 8; User LED1 */ +#define CYBSP_LED8 (P1_5) +/** LED 9; User LED2 */ +#define CYBSP_LED9 (P13_7) +/** LED 5: RGB LED - Red; User LED3 */ +#define CYBSP_LED_RGB_RED (P0_3) +/** LED 5: RGB LED - Green; User LED4 */ +#define CYBSP_LED_RGB_GREEN (P1_1) +/** LED 5: RGB LED - Blue; User LED5 */ +#define CYBSP_LED_RGB_BLUE (P11_1) + +/** LED 8; User LED1 */ +#define CYBSP_USER_LED1 (CYBSP_LED8) +/** LED 9; User LED2 */ +#define CYBSP_USER_LED2 (CYBSP_LED9) +/** LED 5: RGB LED - Red; User LED3 */ +#define CYBSP_USER_LED3 (CYBSP_LED_RGB_RED) +/** LED 5: RGB LED - Green; User LED4 */ +#define CYBSP_USER_LED4 (CYBSP_LED_RGB_GREEN) +/** LED 5: RGB LED - Blue; User LED5 */ +#define CYBSP_USER_LED5 (CYBSP_LED_RGB_BLUE) +/** LED 8; User LED1 */ +#define CYBSP_USER_LED (CYBSP_USER_LED1) + +/** \} group_bsp_pins_led */ + + +/** +* \addtogroup group_bsp_pins_btn Button Pins +* \{ +*/ + +/** Switch 2; User Button 1 */ +#define CYBSP_SW2 (P0_4) + +/** Switch 2; User Button 1 */ +#define CYBSP_USER_BTN1 (CYBSP_SW2) +/** Switch 2; User Button 1 */ +#define CYBSP_USER_BTN (CYBSP_USER_BTN1) + +/** \} group_bsp_pins_btn */ + + +/** +* \addtogroup group_bsp_pins_comm Communication Pins +* \{ +*/ + +/** Pin: WIFI SDIO D0 */ +#define CYBSP_WIFI_SDIO_D0 (P2_0) +/** Pin: WIFI SDIO D1 */ +#define CYBSP_WIFI_SDIO_D1 (P2_1) +/** Pin: WIFI SDIO D2 */ +#define CYBSP_WIFI_SDIO_D2 (P2_2) +/** Pin: WIFI SDIO D3 */ +#define CYBSP_WIFI_SDIO_D3 (P2_3) +/** Pin: WIFI SDIO CMD */ +#define CYBSP_WIFI_SDIO_CMD (P2_4) +/** Pin: WIFI SDIO CLK */ +#define CYBSP_WIFI_SDIO_CLK (P2_5) +/** Pin: WIFI ON */ +#define CYBSP_WIFI_WL_REG_ON (P2_6) +/** Pin: WIFI Host Wakeup */ +#define CYBSP_WIFI_HOST_WAKE (P2_7) + +/** Pin: BT UART RX */ +#define CYBSP_BT_UART_RX (P3_0) +/** Pin: BT UART TX */ +#define CYBSP_BT_UART_TX (P3_1) +/** Pin: BT UART RTS */ +#define CYBSP_BT_UART_RTS (P3_2) +/** Pin: BT UART CTS */ +#define CYBSP_BT_UART_CTS (P3_3) + +/** Pin: BT Power */ +#define CYBSP_BT_POWER (P3_4) +/** Pin: BT Host Wakeup */ +#define CYBSP_BT_HOST_WAKE (P3_5) +/** Pin: BT Device Wakeup */ +#define CYBSP_BT_DEVICE_WAKE (P4_0) + +/** Pin: UART RX */ +#define CYBSP_DEBUG_UART_RX (P5_0) +/** Pin: UART TX */ +#define CYBSP_DEBUG_UART_TX (P5_1) + +/** Pin: I2C SCL */ +#define CYBSP_I2C_SCL (P6_0) +/** Pin: I2C SDA */ +#define CYBSP_I2C_SDA (P6_1) + +/** Pin: SWO */ +#define CYBSP_SWO (P6_4) +/** Pin: SWDIO */ +#define CYBSP_SWDIO (P6_6) +/** Pin: SWDCK */ +#define CYBSP_SWDCK (P6_7) + +/** Pin: QUAD SPI SS */ +#define CYBSP_QSPI_SS (P11_2) +/** Pin: QUAD SPI D3 */ +#define CYBSP_QSPI_D3 (P11_3) +/** Pin: QUAD SPI D2 */ +#define CYBSP_QSPI_D2 (P11_4) +/** Pin: QUAD SPI D1 */ +#define CYBSP_QSPI_D1 (P11_5) +/** Pin: QUAD SPI D0 */ +#define CYBSP_QSPI_D0 (P11_6) +/** Pin: QUAD SPI SCK */ +#define CYBSP_QSPI_SCK (P11_7) + +/** Host-wake GPIO drive mode */ +#define CYBSP_WIFI_HOST_WAKE_GPIO_DM (CYHAL_GPIO_DRIVE_ANALOG) +/** Host-wake IRQ event */ +#define CYBSP_WIFI_HOST_WAKE_IRQ_EVENT (CYHAL_GPIO_IRQ_RISE) + +/** \} group_bsp_pins_comm */ + + +/** +* \addtogroup group_bsp_pins_arduino Arduino Header Pins +* \{ +*/ + +/** Arduino A0 */ +#define CYBSP_A0 P10_0 +/** Arduino A1 */ +#define CYBSP_A1 P10_1 +/** Arduino A2 */ +#define CYBSP_A2 P10_2 +/** Arduino A3 */ +#define CYBSP_A3 P10_3 +/** Arduino A4 */ +#define CYBSP_A4 P10_4 +/** Arduino A5 */ +#define CYBSP_A5 P10_5 +/** Arduino D0 */ +#define CYBSP_D0 (P5_0) +/** Arduino D1 */ +#define CYBSP_D1 (P5_1) +/** Arduino D2 */ +#define CYBSP_D2 (P5_2) +/** Arduino D3 */ +#define CYBSP_D3 (P5_3) +/** Arduino D4 */ +#define CYBSP_D4 (P5_4) +/** Arduino D5 */ +#define CYBSP_D5 (P5_5) +/** Arduino D6 */ +#define CYBSP_D6 (P5_6) +/** Arduino D7 */ +#define CYBSP_D7 (P0_2) +/** Arduino D8 */ +#define CYBSP_D8 (P13_0) +/** Arduino D9 */ +#define CYBSP_D9 (P13_1) +/** Arduino D10 */ +#define CYBSP_D10 (P12_3) +/** Arduino D11 */ +#define CYBSP_D11 (P12_0) +/** Arduino D12 */ +#define CYBSP_D12 (P12_1) +/** Arduino D13 */ +#define CYBSP_D13 (P12_2) +/** Arduino D14 */ +#define CYBSP_D14 (P6_1) +/** Arduino D15 */ +#define CYBSP_D15 (P6_0) + +/** \} group_bsp_pins_arduino */ + +/** \} group_bsp_pins */ + +#endif /* defined(CY_USING_HAL) */ + +#if defined(__cplusplus) +} +#endif diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_ARM/cyb06xxa_cm4_dual.sct b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_ARM/cyb06xxa_cm4_dual.sct new file mode 100644 index 0000000000..2e5ebd339d --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_ARM/cyb06xxa_cm4_dual.sct @@ -0,0 +1,300 @@ +#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4 +; The first line specifies a preprocessor command that the linker invokes +; to pass a scatter file through a C preprocessor. + +;******************************************************************************* +;* \file cyb06xxa_cm4_dual.sct +;* \version 2.60 +;* +;* Linker file for the ARMCC. +;* +;* The main purpose of the linker script is to describe how the sections in the +;* input files should be mapped into the output file, and to control the memory +;* layout of the output file. +;* +;* \note The entry point location is fixed and starts at 0x10000000. The valid +;* application image should be placed there. +;* +;* \note The linker files included with the PDL template projects must be +;* generic and handle all common use cases. Your project may not use every +;* section defined in the linker files. In that case you may see the warnings +;* during the build process: L6314W (no section matches pattern) and/or L6329W +;* (pattern only matches removed unused sections). In your project, you can +;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to +;* the linker, simply comment out or remove the relevant code in the linker +;* file. +;* +;******************************************************************************* +;* \copyright +;* Copyright 2016-2019 Cypress Semiconductor Corporation +;* SPDX-License-Identifier: Apache-2.0 +;* +;* Licensed under the Apache License, Version 2.0 (the "License"); +;* you may not use this file except in compliance with the License. +;* You may obtain a copy of the License at +;* +;* http://www.apache.org/licenses/LICENSE-2.0 +;* +;* Unless required by applicable law or agreed to in writing, software +;* distributed under the License is distributed on an "AS IS" BASIS, +;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +;* See the License for the specific language governing permissions and +;* limitations under the License. +;******************************************************************************/ + +#if !defined(MBED_ROM_START) + #define MBED_ROM_START 0x10000400 +#endif + +;* MBED_APP_START is being used by the bootloader build script and +;* will be calculate by the system. Without bootloader the MBED_APP_START +;* is equal to MBED_ROM_START +;* +#if !defined(MBED_APP_START) + #define MBED_APP_START MBED_ROM_START +#endif + +#if !defined(MBED_ROM_SIZE) + #define MBED_ROM_SIZE 0x001CFC00 +#endif + +;* MBED_APP_SIZE is being used by the bootloader build script and +;* will be calculate by the system. Without bootloader the MBED_APP_SIZE +;* is equal to MBED_ROM_SIZE +;* +#if !defined(MBED_APP_SIZE) + #define MBED_APP_SIZE MBED_ROM_SIZE +#endif + +#if !defined(MBED_RAM_START) + #define MBED_RAM_START 0x08000000 +#endif + +#if !defined(MBED_RAM_SIZE) + #define MBED_RAM_SIZE 0x000D8000 +#endif + +#if !defined(MBED_BOOT_STACK_SIZE) + #define MBED_BOOT_STACK_SIZE 0x400 +#endif + +; Size of the stack section at the end of CM4 SRAM +#define STACK_SIZE MBED_BOOT_STACK_SIZE + +; The defines below describe the location and size of blocks of memory in the target. +; Use these defines to specify the memory regions available for allocation. + +; The following defines control RAM and flash memory allocation for the CM4 core. +; You can change the memory allocation by editing RAM and Flash defines. +; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use. +; Using this memory region for other purposes will lead to unexpected behavior. +; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat', +; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'. +; RAM +#define RAM_START MBED_RAM_START +#define RAM_SIZE MBED_RAM_SIZE +; Flash +#define FLASH_START MBED_APP_START +#define FLASH_SIZE MBED_APP_SIZE + +; The following defines describe a 32K flash region used for EEPROM emulation. +; This region can also be used as the general purpose flash. +; You can assign sections to this memory region for only one of the cores. +; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region. +; Therefore, repurposing this memory region will prevent such middleware from operation. +#define EM_EEPROM_START 0x14000000 +#define EM_EEPROM_SIZE 0x8000 + +; The following defines describe device specific memory regions and must not be changed. +; Supervisory flash: User data +#define SFLASH_USER_DATA_START 0x16000800 +#define SFLASH_USER_DATA_SIZE 0x00000800 + +; Supervisory flash: Normal Access Restrictions (NAR) +#define SFLASH_NAR_START 0x16001A00 +#define SFLASH_NAR_SIZE 0x00000200 + +; Supervisory flash: Public Key +#define SFLASH_PUBLIC_KEY_START 0x16005A00 +#define SFLASH_PUBLIC_KEY_SIZE 0x00000C00 + +; Supervisory flash: Table of Content # 2 +#define SFLASH_TOC_2_START 0x16007C00 +#define SFLASH_TOC_2_SIZE 0x00000200 + +; Supervisory flash: Table of Content # 2 Copy +#define SFLASH_RTOC_2_START 0x16007E00 +#define SFLASH_RTOC_2_SIZE 0x00000200 + +; External memory +#define XIP_START 0x18000000 +#define XIP_SIZE 0x08000000 + +; eFuse +#define EFUSE_START 0x90700000 +#define EFUSE_SIZE 0x100000 + + +; Cortex-M4 application flash area +LR_IROM1 FLASH_START FLASH_SIZE +{ + ER_FLASH_VECTORS +0 + { + * (RESET, +FIRST) + } + + ER_FLASH_CODE +0 FIXED + { + * (InRoot$$Sections) + * (+RO) + } + + ER_RAM_VECTORS RAM_START UNINIT + { + * (RESET_RAM, +FIRST) + } + + RW_RAM_DATA +0 + { + * (.cy_ramfunc) + * (+RW, +ZI) + } + + ; Place variables in the section that should not be initialized during the + ; device startup. + RW_IRAM1 +0 UNINIT + { + * (.noinit) + } + + ; Application heap area (HEAP) + ARM_LIB_HEAP +0 + { + * (HEAP) + } + + ; Stack region growing down + ARM_LIB_STACK RAM_START+RAM_SIZE -STACK_SIZE + { + * (STACK) + } + + ; Used for the digital signature of the secure application and the + ; Bootloader SDK application. The size of the section depends on the required + ; data size. + .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256 + { + * (.cy_app_signature) + } +} + + +; Emulated EEPROM Flash area +LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE +{ + .cy_em_eeprom +0 + { + * (.cy_em_eeprom) + } +} + +; Supervisory flash: User data +LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE +{ + .cy_sflash_user_data +0 + { + * (.cy_sflash_user_data) + } +} + +; Supervisory flash: Normal Access Restrictions (NAR) +LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE +{ + .cy_sflash_nar +0 + { + * (.cy_sflash_nar) + } +} + +; Supervisory flash: Public Key +LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE +{ + .cy_sflash_public_key +0 + { + * (.cy_sflash_public_key) + } +} + +; Supervisory flash: Table of Content # 2 +LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE +{ + .cy_toc_part2 +0 + { + * (.cy_toc_part2) + } +} + +; Supervisory flash: Table of Content # 2 Copy +LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE +{ + .cy_rtoc_part2 +0 + { + * (.cy_rtoc_part2) + } +} + + +; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details. +LR_EROM XIP_START XIP_SIZE +{ + .cy_xip +0 + { + * (.cy_xip) + } +} + + +; eFuse +LR_EFUSE EFUSE_START EFUSE_SIZE +{ + .cy_efuse +0 + { + * (.cy_efuse) + } +} + + +; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. +CYMETA 0x90500000 +{ + .cymeta +0 { * (.cymeta) } +} + +/* The following symbols used by the cymcuelftool. */ +/* Flash */ +#define __cy_memory_0_start 0x10000000 +#define __cy_memory_0_length 0x001D0000 +#define __cy_memory_0_row_size 0x200 + +/* Emulated EEPROM Flash area */ +#define __cy_memory_1_start 0x14000000 +#define __cy_memory_1_length 0x8000 +#define __cy_memory_1_row_size 0x200 + +/* Supervisory Flash */ +#define __cy_memory_2_start 0x16000000 +#define __cy_memory_2_length 0x8000 +#define __cy_memory_2_row_size 0x200 + +/* XIP */ +#define __cy_memory_3_start 0x18000000 +#define __cy_memory_3_length 0x08000000 +#define __cy_memory_3_row_size 0x200 + +/* eFuse */ +#define __cy_memory_4_start 0x90700000 +#define __cy_memory_4_length 0x100000 +#define __cy_memory_4_row_size 1 + + +/* [] END OF FILE */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_ARM/startup_psoc6_02_cm4.S b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_ARM/startup_psoc6_02_cm4.S new file mode 100644 index 0000000000..dddf31e622 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_ARM/startup_psoc6_02_cm4.S @@ -0,0 +1,747 @@ +;/**************************************************************************//** +; * @file startup_psoc6_02_cm4.S +; * @brief CMSIS Core Device Startup File for +; * ARMCM4 Device Series +; * @version V5.00 +; * @date 02. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;/* +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +;*/ + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + IF :DEF:__STACK_SIZE +Stack_Size EQU __STACK_SIZE + ELSE +Stack_Size EQU 0x00000400 + ENDIF + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + IF :DEF:__HEAP_SIZE +Heap_Size EQU __HEAP_SIZE + ELSE +Heap_Size EQU 0x00000400 + ENDIF + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + + DCD 0x0000000D ; NMI Handler located at ROM code + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External interrupts Description + DCD ioss_interrupts_gpio_0_IRQHandler ; GPIO Port Interrupt #0 + DCD ioss_interrupts_gpio_1_IRQHandler ; GPIO Port Interrupt #1 + DCD ioss_interrupts_gpio_2_IRQHandler ; GPIO Port Interrupt #2 + DCD ioss_interrupts_gpio_3_IRQHandler ; GPIO Port Interrupt #3 + DCD ioss_interrupts_gpio_4_IRQHandler ; GPIO Port Interrupt #4 + DCD ioss_interrupts_gpio_5_IRQHandler ; GPIO Port Interrupt #5 + DCD ioss_interrupts_gpio_6_IRQHandler ; GPIO Port Interrupt #6 + DCD ioss_interrupts_gpio_7_IRQHandler ; GPIO Port Interrupt #7 + DCD ioss_interrupts_gpio_8_IRQHandler ; GPIO Port Interrupt #8 + DCD ioss_interrupts_gpio_9_IRQHandler ; GPIO Port Interrupt #9 + DCD ioss_interrupts_gpio_10_IRQHandler ; GPIO Port Interrupt #10 + DCD ioss_interrupts_gpio_11_IRQHandler ; GPIO Port Interrupt #11 + DCD ioss_interrupts_gpio_12_IRQHandler ; GPIO Port Interrupt #12 + DCD ioss_interrupts_gpio_13_IRQHandler ; GPIO Port Interrupt #13 + DCD ioss_interrupts_gpio_14_IRQHandler ; GPIO Port Interrupt #14 + DCD ioss_interrupt_gpio_IRQHandler ; GPIO All Ports + DCD ioss_interrupt_vdd_IRQHandler ; GPIO Supply Detect Interrupt + DCD lpcomp_interrupt_IRQHandler ; Low Power Comparator Interrupt + DCD scb_8_interrupt_IRQHandler ; Serial Communication Block #8 (DeepSleep capable) + DCD srss_interrupt_mcwdt_0_IRQHandler ; Multi Counter Watchdog Timer interrupt + DCD srss_interrupt_mcwdt_1_IRQHandler ; Multi Counter Watchdog Timer interrupt + DCD srss_interrupt_backup_IRQHandler ; Backup domain interrupt + DCD srss_interrupt_IRQHandler ; Other combined Interrupts for SRSS (LVD, WDT, CLKCAL) + DCD cpuss_interrupts_ipc_0_IRQHandler ; CPUSS Inter Process Communication Interrupt #0 + DCD cpuss_interrupts_ipc_1_IRQHandler ; CPUSS Inter Process Communication Interrupt #1 + DCD cpuss_interrupts_ipc_2_IRQHandler ; CPUSS Inter Process Communication Interrupt #2 + DCD cpuss_interrupts_ipc_3_IRQHandler ; CPUSS Inter Process Communication Interrupt #3 + DCD cpuss_interrupts_ipc_4_IRQHandler ; CPUSS Inter Process Communication Interrupt #4 + DCD cpuss_interrupts_ipc_5_IRQHandler ; CPUSS Inter Process Communication Interrupt #5 + DCD cpuss_interrupts_ipc_6_IRQHandler ; CPUSS Inter Process Communication Interrupt #6 + DCD cpuss_interrupts_ipc_7_IRQHandler ; CPUSS Inter Process Communication Interrupt #7 + DCD cpuss_interrupts_ipc_8_IRQHandler ; CPUSS Inter Process Communication Interrupt #8 + DCD cpuss_interrupts_ipc_9_IRQHandler ; CPUSS Inter Process Communication Interrupt #9 + DCD cpuss_interrupts_ipc_10_IRQHandler ; CPUSS Inter Process Communication Interrupt #10 + DCD cpuss_interrupts_ipc_11_IRQHandler ; CPUSS Inter Process Communication Interrupt #11 + DCD cpuss_interrupts_ipc_12_IRQHandler ; CPUSS Inter Process Communication Interrupt #12 + DCD cpuss_interrupts_ipc_13_IRQHandler ; CPUSS Inter Process Communication Interrupt #13 + DCD cpuss_interrupts_ipc_14_IRQHandler ; CPUSS Inter Process Communication Interrupt #14 + DCD cpuss_interrupts_ipc_15_IRQHandler ; CPUSS Inter Process Communication Interrupt #15 + DCD scb_0_interrupt_IRQHandler ; Serial Communication Block #0 + DCD scb_1_interrupt_IRQHandler ; Serial Communication Block #1 + DCD scb_2_interrupt_IRQHandler ; Serial Communication Block #2 + DCD scb_3_interrupt_IRQHandler ; Serial Communication Block #3 + DCD scb_4_interrupt_IRQHandler ; Serial Communication Block #4 + DCD scb_5_interrupt_IRQHandler ; Serial Communication Block #5 + DCD scb_6_interrupt_IRQHandler ; Serial Communication Block #6 + DCD scb_7_interrupt_IRQHandler ; Serial Communication Block #7 + DCD scb_9_interrupt_IRQHandler ; Serial Communication Block #9 + DCD scb_10_interrupt_IRQHandler ; Serial Communication Block #10 + DCD scb_11_interrupt_IRQHandler ; Serial Communication Block #11 + DCD scb_12_interrupt_IRQHandler ; Serial Communication Block #12 + DCD csd_interrupt_IRQHandler ; CSD (Capsense) interrupt + DCD cpuss_interrupts_dmac_0_IRQHandler ; CPUSS DMAC, Channel #0 + DCD cpuss_interrupts_dmac_1_IRQHandler ; CPUSS DMAC, Channel #1 + DCD cpuss_interrupts_dmac_2_IRQHandler ; CPUSS DMAC, Channel #2 + DCD cpuss_interrupts_dmac_3_IRQHandler ; CPUSS DMAC, Channel #3 + DCD cpuss_interrupts_dw0_0_IRQHandler ; CPUSS DataWire #0, Channel #0 + DCD cpuss_interrupts_dw0_1_IRQHandler ; CPUSS DataWire #0, Channel #1 + DCD cpuss_interrupts_dw0_2_IRQHandler ; CPUSS DataWire #0, Channel #2 + DCD cpuss_interrupts_dw0_3_IRQHandler ; CPUSS DataWire #0, Channel #3 + DCD cpuss_interrupts_dw0_4_IRQHandler ; CPUSS DataWire #0, Channel #4 + DCD cpuss_interrupts_dw0_5_IRQHandler ; CPUSS DataWire #0, Channel #5 + DCD cpuss_interrupts_dw0_6_IRQHandler ; CPUSS DataWire #0, Channel #6 + DCD cpuss_interrupts_dw0_7_IRQHandler ; CPUSS DataWire #0, Channel #7 + DCD cpuss_interrupts_dw0_8_IRQHandler ; CPUSS DataWire #0, Channel #8 + DCD cpuss_interrupts_dw0_9_IRQHandler ; CPUSS DataWire #0, Channel #9 + DCD cpuss_interrupts_dw0_10_IRQHandler ; CPUSS DataWire #0, Channel #10 + DCD cpuss_interrupts_dw0_11_IRQHandler ; CPUSS DataWire #0, Channel #11 + DCD cpuss_interrupts_dw0_12_IRQHandler ; CPUSS DataWire #0, Channel #12 + DCD cpuss_interrupts_dw0_13_IRQHandler ; CPUSS DataWire #0, Channel #13 + DCD cpuss_interrupts_dw0_14_IRQHandler ; CPUSS DataWire #0, Channel #14 + DCD cpuss_interrupts_dw0_15_IRQHandler ; CPUSS DataWire #0, Channel #15 + DCD cpuss_interrupts_dw0_16_IRQHandler ; CPUSS DataWire #0, Channel #16 + DCD cpuss_interrupts_dw0_17_IRQHandler ; CPUSS DataWire #0, Channel #17 + DCD cpuss_interrupts_dw0_18_IRQHandler ; CPUSS DataWire #0, Channel #18 + DCD cpuss_interrupts_dw0_19_IRQHandler ; CPUSS DataWire #0, Channel #19 + DCD cpuss_interrupts_dw0_20_IRQHandler ; CPUSS DataWire #0, Channel #20 + DCD cpuss_interrupts_dw0_21_IRQHandler ; CPUSS DataWire #0, Channel #21 + DCD cpuss_interrupts_dw0_22_IRQHandler ; CPUSS DataWire #0, Channel #22 + DCD cpuss_interrupts_dw0_23_IRQHandler ; CPUSS DataWire #0, Channel #23 + DCD cpuss_interrupts_dw0_24_IRQHandler ; CPUSS DataWire #0, Channel #24 + DCD cpuss_interrupts_dw0_25_IRQHandler ; CPUSS DataWire #0, Channel #25 + DCD cpuss_interrupts_dw0_26_IRQHandler ; CPUSS DataWire #0, Channel #26 + DCD cpuss_interrupts_dw0_27_IRQHandler ; CPUSS DataWire #0, Channel #27 + DCD cpuss_interrupts_dw0_28_IRQHandler ; CPUSS DataWire #0, Channel #28 + DCD cpuss_interrupts_dw1_0_IRQHandler ; CPUSS DataWire #1, Channel #0 + DCD cpuss_interrupts_dw1_1_IRQHandler ; CPUSS DataWire #1, Channel #1 + DCD cpuss_interrupts_dw1_2_IRQHandler ; CPUSS DataWire #1, Channel #2 + DCD cpuss_interrupts_dw1_3_IRQHandler ; CPUSS DataWire #1, Channel #3 + DCD cpuss_interrupts_dw1_4_IRQHandler ; CPUSS DataWire #1, Channel #4 + DCD cpuss_interrupts_dw1_5_IRQHandler ; CPUSS DataWire #1, Channel #5 + DCD cpuss_interrupts_dw1_6_IRQHandler ; CPUSS DataWire #1, Channel #6 + DCD cpuss_interrupts_dw1_7_IRQHandler ; CPUSS DataWire #1, Channel #7 + DCD cpuss_interrupts_dw1_8_IRQHandler ; CPUSS DataWire #1, Channel #8 + DCD cpuss_interrupts_dw1_9_IRQHandler ; CPUSS DataWire #1, Channel #9 + DCD cpuss_interrupts_dw1_10_IRQHandler ; CPUSS DataWire #1, Channel #10 + DCD cpuss_interrupts_dw1_11_IRQHandler ; CPUSS DataWire #1, Channel #11 + DCD cpuss_interrupts_dw1_12_IRQHandler ; CPUSS DataWire #1, Channel #12 + DCD cpuss_interrupts_dw1_13_IRQHandler ; CPUSS DataWire #1, Channel #13 + DCD cpuss_interrupts_dw1_14_IRQHandler ; CPUSS DataWire #1, Channel #14 + DCD cpuss_interrupts_dw1_15_IRQHandler ; CPUSS DataWire #1, Channel #15 + DCD cpuss_interrupts_dw1_16_IRQHandler ; CPUSS DataWire #1, Channel #16 + DCD cpuss_interrupts_dw1_17_IRQHandler ; CPUSS DataWire #1, Channel #17 + DCD cpuss_interrupts_dw1_18_IRQHandler ; CPUSS DataWire #1, Channel #18 + DCD cpuss_interrupts_dw1_19_IRQHandler ; CPUSS DataWire #1, Channel #19 + DCD cpuss_interrupts_dw1_20_IRQHandler ; CPUSS DataWire #1, Channel #20 + DCD cpuss_interrupts_dw1_21_IRQHandler ; CPUSS DataWire #1, Channel #21 + DCD cpuss_interrupts_dw1_22_IRQHandler ; CPUSS DataWire #1, Channel #22 + DCD cpuss_interrupts_dw1_23_IRQHandler ; CPUSS DataWire #1, Channel #23 + DCD cpuss_interrupts_dw1_24_IRQHandler ; CPUSS DataWire #1, Channel #24 + DCD cpuss_interrupts_dw1_25_IRQHandler ; CPUSS DataWire #1, Channel #25 + DCD cpuss_interrupts_dw1_26_IRQHandler ; CPUSS DataWire #1, Channel #26 + DCD cpuss_interrupts_dw1_27_IRQHandler ; CPUSS DataWire #1, Channel #27 + DCD cpuss_interrupts_dw1_28_IRQHandler ; CPUSS DataWire #1, Channel #28 + DCD cpuss_interrupts_fault_0_IRQHandler ; CPUSS Fault Structure Interrupt #0 + DCD cpuss_interrupts_fault_1_IRQHandler ; CPUSS Fault Structure Interrupt #1 + DCD cpuss_interrupt_crypto_IRQHandler ; CRYPTO Accelerator Interrupt + DCD cpuss_interrupt_fm_IRQHandler ; FLASH Macro Interrupt + DCD cpuss_interrupts_cm4_fp_IRQHandler ; Floating Point operation fault + DCD cpuss_interrupts_cm0_cti_0_IRQHandler ; CM0+ CTI #0 + DCD cpuss_interrupts_cm0_cti_1_IRQHandler ; CM0+ CTI #1 + DCD cpuss_interrupts_cm4_cti_0_IRQHandler ; CM4 CTI #0 + DCD cpuss_interrupts_cm4_cti_1_IRQHandler ; CM4 CTI #1 + DCD tcpwm_0_interrupts_0_IRQHandler ; TCPWM #0, Counter #0 + DCD tcpwm_0_interrupts_1_IRQHandler ; TCPWM #0, Counter #1 + DCD tcpwm_0_interrupts_2_IRQHandler ; TCPWM #0, Counter #2 + DCD tcpwm_0_interrupts_3_IRQHandler ; TCPWM #0, Counter #3 + DCD tcpwm_0_interrupts_4_IRQHandler ; TCPWM #0, Counter #4 + DCD tcpwm_0_interrupts_5_IRQHandler ; TCPWM #0, Counter #5 + DCD tcpwm_0_interrupts_6_IRQHandler ; TCPWM #0, Counter #6 + DCD tcpwm_0_interrupts_7_IRQHandler ; TCPWM #0, Counter #7 + DCD tcpwm_1_interrupts_0_IRQHandler ; TCPWM #1, Counter #0 + DCD tcpwm_1_interrupts_1_IRQHandler ; TCPWM #1, Counter #1 + DCD tcpwm_1_interrupts_2_IRQHandler ; TCPWM #1, Counter #2 + DCD tcpwm_1_interrupts_3_IRQHandler ; TCPWM #1, Counter #3 + DCD tcpwm_1_interrupts_4_IRQHandler ; TCPWM #1, Counter #4 + DCD tcpwm_1_interrupts_5_IRQHandler ; TCPWM #1, Counter #5 + DCD tcpwm_1_interrupts_6_IRQHandler ; TCPWM #1, Counter #6 + DCD tcpwm_1_interrupts_7_IRQHandler ; TCPWM #1, Counter #7 + DCD tcpwm_1_interrupts_8_IRQHandler ; TCPWM #1, Counter #8 + DCD tcpwm_1_interrupts_9_IRQHandler ; TCPWM #1, Counter #9 + DCD tcpwm_1_interrupts_10_IRQHandler ; TCPWM #1, Counter #10 + DCD tcpwm_1_interrupts_11_IRQHandler ; TCPWM #1, Counter #11 + DCD tcpwm_1_interrupts_12_IRQHandler ; TCPWM #1, Counter #12 + DCD tcpwm_1_interrupts_13_IRQHandler ; TCPWM #1, Counter #13 + DCD tcpwm_1_interrupts_14_IRQHandler ; TCPWM #1, Counter #14 + DCD tcpwm_1_interrupts_15_IRQHandler ; TCPWM #1, Counter #15 + DCD tcpwm_1_interrupts_16_IRQHandler ; TCPWM #1, Counter #16 + DCD tcpwm_1_interrupts_17_IRQHandler ; TCPWM #1, Counter #17 + DCD tcpwm_1_interrupts_18_IRQHandler ; TCPWM #1, Counter #18 + DCD tcpwm_1_interrupts_19_IRQHandler ; TCPWM #1, Counter #19 + DCD tcpwm_1_interrupts_20_IRQHandler ; TCPWM #1, Counter #20 + DCD tcpwm_1_interrupts_21_IRQHandler ; TCPWM #1, Counter #21 + DCD tcpwm_1_interrupts_22_IRQHandler ; TCPWM #1, Counter #22 + DCD tcpwm_1_interrupts_23_IRQHandler ; TCPWM #1, Counter #23 + DCD pass_interrupt_sar_IRQHandler ; SAR ADC interrupt + DCD audioss_0_interrupt_i2s_IRQHandler ; I2S0 Audio interrupt + DCD audioss_0_interrupt_pdm_IRQHandler ; PDM0/PCM0 Audio interrupt + DCD audioss_1_interrupt_i2s_IRQHandler ; I2S1 Audio interrupt + DCD profile_interrupt_IRQHandler ; Energy Profiler interrupt + DCD smif_interrupt_IRQHandler ; Serial Memory Interface interrupt + DCD usb_interrupt_hi_IRQHandler ; USB Interrupt + DCD usb_interrupt_med_IRQHandler ; USB Interrupt + DCD usb_interrupt_lo_IRQHandler ; USB Interrupt + DCD sdhc_0_interrupt_wakeup_IRQHandler ; SDIO wakeup interrupt for mxsdhc + DCD sdhc_0_interrupt_general_IRQHandler ; Consolidated interrupt for mxsdhc for everything else + DCD sdhc_1_interrupt_wakeup_IRQHandler ; EEMC wakeup interrupt for mxsdhc, not used + DCD sdhc_1_interrupt_general_IRQHandler ; Consolidated interrupt for mxsdhc for everything else + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + EXPORT __ramVectors + AREA RESET_RAM, READWRITE, NOINIT +__ramVectors SPACE __Vectors_Size + + + AREA |.text|, CODE, READONLY + + +; Weak function for startup customization +; +; Note. The global resources are not yet initialized (for example global variables, peripherals, clocks) +; because this function is executed as the first instruction in the ResetHandler. +; The PDL is also not initialized to use the proper register offsets. +; The user of this function is responsible for initializing the PDL and resources before using them. +; +Cy_OnResetUser PROC + EXPORT Cy_OnResetUser [WEAK] + BX LR + ENDP + +; Reset Handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT Cy_SystemInitFpuEnable + IMPORT __main + + ; Define strong function for startup customization + BL Cy_OnResetUser + + ; Disable global interrupts + CPSID I + + ; Copy vectors from ROM to RAM + LDR r1, =__Vectors + LDR r0, =__ramVectors + LDR r2, =__Vectors_Size +Vectors_Copy + LDR r3, [r1] + STR r3, [r0] + ADDS r0, r0, #4 + ADDS r1, r1, #4 + SUBS r2, r2, #1 + CMP r2, #0 + BNE Vectors_Copy + + ; Update Vector Table Offset Register. */ + LDR r0, =__ramVectors + LDR r1, =0xE000ED08 + STR r0, [r1] + dsb 0xF + + ; Enable the FPU if used + LDR R0, =Cy_SystemInitFpuEnable + BLX R0 + + LDR R0, =__main + BLX R0 + + ; Should never get here + B . + + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP + +Cy_SysLib_FaultHandler PROC + EXPORT Cy_SysLib_FaultHandler [WEAK] + B . + ENDP +HardFault_Wrapper\ + PROC + EXPORT HardFault_Wrapper [WEAK] + movs r0, #4 + mov r1, LR + tst r0, r1 + beq L_MSP + mrs r0, PSP + bl L_API_call +L_MSP + mrs r0, MSP +L_API_call + bl Cy_SysLib_FaultHandler + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B HardFault_Wrapper + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B HardFault_Wrapper + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B HardFault_Wrapper + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B HardFault_Wrapper + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + EXPORT Default_Handler [WEAK] + EXPORT ioss_interrupts_gpio_0_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_1_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_2_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_3_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_4_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_5_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_6_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_7_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_8_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_9_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_10_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_11_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_12_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_13_IRQHandler [WEAK] + EXPORT ioss_interrupts_gpio_14_IRQHandler [WEAK] + EXPORT ioss_interrupt_gpio_IRQHandler [WEAK] + EXPORT ioss_interrupt_vdd_IRQHandler [WEAK] + EXPORT lpcomp_interrupt_IRQHandler [WEAK] + EXPORT scb_8_interrupt_IRQHandler [WEAK] + EXPORT srss_interrupt_mcwdt_0_IRQHandler [WEAK] + EXPORT srss_interrupt_mcwdt_1_IRQHandler [WEAK] + EXPORT srss_interrupt_backup_IRQHandler [WEAK] + EXPORT srss_interrupt_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_1_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_2_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_3_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_4_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_5_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_6_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_7_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_8_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_9_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_10_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_11_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_12_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_13_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_14_IRQHandler [WEAK] + EXPORT cpuss_interrupts_ipc_15_IRQHandler [WEAK] + EXPORT scb_0_interrupt_IRQHandler [WEAK] + EXPORT scb_1_interrupt_IRQHandler [WEAK] + EXPORT scb_2_interrupt_IRQHandler [WEAK] + EXPORT scb_3_interrupt_IRQHandler [WEAK] + EXPORT scb_4_interrupt_IRQHandler [WEAK] + EXPORT scb_5_interrupt_IRQHandler [WEAK] + EXPORT scb_6_interrupt_IRQHandler [WEAK] + EXPORT scb_7_interrupt_IRQHandler [WEAK] + EXPORT scb_9_interrupt_IRQHandler [WEAK] + EXPORT scb_10_interrupt_IRQHandler [WEAK] + EXPORT scb_11_interrupt_IRQHandler [WEAK] + EXPORT scb_12_interrupt_IRQHandler [WEAK] + EXPORT csd_interrupt_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dmac_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dmac_1_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dmac_2_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dmac_3_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_1_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_2_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_3_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_4_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_5_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_6_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_7_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_8_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_9_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_10_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_11_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_12_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_13_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_14_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_15_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_16_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_17_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_18_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_19_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_20_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_21_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_22_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_23_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_24_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_25_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_26_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_27_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw0_28_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_1_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_2_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_3_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_4_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_5_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_6_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_7_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_8_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_9_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_10_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_11_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_12_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_13_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_14_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_15_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_16_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_17_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_18_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_19_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_20_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_21_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_22_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_23_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_24_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_25_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_26_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_27_IRQHandler [WEAK] + EXPORT cpuss_interrupts_dw1_28_IRQHandler [WEAK] + EXPORT cpuss_interrupts_fault_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_fault_1_IRQHandler [WEAK] + EXPORT cpuss_interrupt_crypto_IRQHandler [WEAK] + EXPORT cpuss_interrupt_fm_IRQHandler [WEAK] + EXPORT cpuss_interrupts_cm4_fp_IRQHandler [WEAK] + EXPORT cpuss_interrupts_cm0_cti_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_cm0_cti_1_IRQHandler [WEAK] + EXPORT cpuss_interrupts_cm4_cti_0_IRQHandler [WEAK] + EXPORT cpuss_interrupts_cm4_cti_1_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_0_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_1_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_2_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_3_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_4_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_5_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_6_IRQHandler [WEAK] + EXPORT tcpwm_0_interrupts_7_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_0_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_1_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_2_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_3_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_4_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_5_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_6_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_7_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_8_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_9_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_10_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_11_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_12_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_13_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_14_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_15_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_16_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_17_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_18_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_19_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_20_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_21_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_22_IRQHandler [WEAK] + EXPORT tcpwm_1_interrupts_23_IRQHandler [WEAK] + EXPORT pass_interrupt_sar_IRQHandler [WEAK] + EXPORT audioss_0_interrupt_i2s_IRQHandler [WEAK] + EXPORT audioss_0_interrupt_pdm_IRQHandler [WEAK] + EXPORT audioss_1_interrupt_i2s_IRQHandler [WEAK] + EXPORT profile_interrupt_IRQHandler [WEAK] + EXPORT smif_interrupt_IRQHandler [WEAK] + EXPORT usb_interrupt_hi_IRQHandler [WEAK] + EXPORT usb_interrupt_med_IRQHandler [WEAK] + EXPORT usb_interrupt_lo_IRQHandler [WEAK] + EXPORT sdhc_0_interrupt_wakeup_IRQHandler [WEAK] + EXPORT sdhc_0_interrupt_general_IRQHandler [WEAK] + EXPORT sdhc_1_interrupt_wakeup_IRQHandler [WEAK] + EXPORT sdhc_1_interrupt_general_IRQHandler [WEAK] + +ioss_interrupts_gpio_0_IRQHandler +ioss_interrupts_gpio_1_IRQHandler +ioss_interrupts_gpio_2_IRQHandler +ioss_interrupts_gpio_3_IRQHandler +ioss_interrupts_gpio_4_IRQHandler +ioss_interrupts_gpio_5_IRQHandler +ioss_interrupts_gpio_6_IRQHandler +ioss_interrupts_gpio_7_IRQHandler +ioss_interrupts_gpio_8_IRQHandler +ioss_interrupts_gpio_9_IRQHandler +ioss_interrupts_gpio_10_IRQHandler +ioss_interrupts_gpio_11_IRQHandler +ioss_interrupts_gpio_12_IRQHandler +ioss_interrupts_gpio_13_IRQHandler +ioss_interrupts_gpio_14_IRQHandler +ioss_interrupt_gpio_IRQHandler +ioss_interrupt_vdd_IRQHandler +lpcomp_interrupt_IRQHandler +scb_8_interrupt_IRQHandler +srss_interrupt_mcwdt_0_IRQHandler +srss_interrupt_mcwdt_1_IRQHandler +srss_interrupt_backup_IRQHandler +srss_interrupt_IRQHandler +cpuss_interrupts_ipc_0_IRQHandler +cpuss_interrupts_ipc_1_IRQHandler +cpuss_interrupts_ipc_2_IRQHandler +cpuss_interrupts_ipc_3_IRQHandler +cpuss_interrupts_ipc_4_IRQHandler +cpuss_interrupts_ipc_5_IRQHandler +cpuss_interrupts_ipc_6_IRQHandler +cpuss_interrupts_ipc_7_IRQHandler +cpuss_interrupts_ipc_8_IRQHandler +cpuss_interrupts_ipc_9_IRQHandler +cpuss_interrupts_ipc_10_IRQHandler +cpuss_interrupts_ipc_11_IRQHandler +cpuss_interrupts_ipc_12_IRQHandler +cpuss_interrupts_ipc_13_IRQHandler +cpuss_interrupts_ipc_14_IRQHandler +cpuss_interrupts_ipc_15_IRQHandler +scb_0_interrupt_IRQHandler +scb_1_interrupt_IRQHandler +scb_2_interrupt_IRQHandler +scb_3_interrupt_IRQHandler +scb_4_interrupt_IRQHandler +scb_5_interrupt_IRQHandler +scb_6_interrupt_IRQHandler +scb_7_interrupt_IRQHandler +scb_9_interrupt_IRQHandler +scb_10_interrupt_IRQHandler +scb_11_interrupt_IRQHandler +scb_12_interrupt_IRQHandler +csd_interrupt_IRQHandler +cpuss_interrupts_dmac_0_IRQHandler +cpuss_interrupts_dmac_1_IRQHandler +cpuss_interrupts_dmac_2_IRQHandler +cpuss_interrupts_dmac_3_IRQHandler +cpuss_interrupts_dw0_0_IRQHandler +cpuss_interrupts_dw0_1_IRQHandler +cpuss_interrupts_dw0_2_IRQHandler +cpuss_interrupts_dw0_3_IRQHandler +cpuss_interrupts_dw0_4_IRQHandler +cpuss_interrupts_dw0_5_IRQHandler +cpuss_interrupts_dw0_6_IRQHandler +cpuss_interrupts_dw0_7_IRQHandler +cpuss_interrupts_dw0_8_IRQHandler +cpuss_interrupts_dw0_9_IRQHandler +cpuss_interrupts_dw0_10_IRQHandler +cpuss_interrupts_dw0_11_IRQHandler +cpuss_interrupts_dw0_12_IRQHandler +cpuss_interrupts_dw0_13_IRQHandler +cpuss_interrupts_dw0_14_IRQHandler +cpuss_interrupts_dw0_15_IRQHandler +cpuss_interrupts_dw0_16_IRQHandler +cpuss_interrupts_dw0_17_IRQHandler +cpuss_interrupts_dw0_18_IRQHandler +cpuss_interrupts_dw0_19_IRQHandler +cpuss_interrupts_dw0_20_IRQHandler +cpuss_interrupts_dw0_21_IRQHandler +cpuss_interrupts_dw0_22_IRQHandler +cpuss_interrupts_dw0_23_IRQHandler +cpuss_interrupts_dw0_24_IRQHandler +cpuss_interrupts_dw0_25_IRQHandler +cpuss_interrupts_dw0_26_IRQHandler +cpuss_interrupts_dw0_27_IRQHandler +cpuss_interrupts_dw0_28_IRQHandler +cpuss_interrupts_dw1_0_IRQHandler +cpuss_interrupts_dw1_1_IRQHandler +cpuss_interrupts_dw1_2_IRQHandler +cpuss_interrupts_dw1_3_IRQHandler +cpuss_interrupts_dw1_4_IRQHandler +cpuss_interrupts_dw1_5_IRQHandler +cpuss_interrupts_dw1_6_IRQHandler +cpuss_interrupts_dw1_7_IRQHandler +cpuss_interrupts_dw1_8_IRQHandler +cpuss_interrupts_dw1_9_IRQHandler +cpuss_interrupts_dw1_10_IRQHandler +cpuss_interrupts_dw1_11_IRQHandler +cpuss_interrupts_dw1_12_IRQHandler +cpuss_interrupts_dw1_13_IRQHandler +cpuss_interrupts_dw1_14_IRQHandler +cpuss_interrupts_dw1_15_IRQHandler +cpuss_interrupts_dw1_16_IRQHandler +cpuss_interrupts_dw1_17_IRQHandler +cpuss_interrupts_dw1_18_IRQHandler +cpuss_interrupts_dw1_19_IRQHandler +cpuss_interrupts_dw1_20_IRQHandler +cpuss_interrupts_dw1_21_IRQHandler +cpuss_interrupts_dw1_22_IRQHandler +cpuss_interrupts_dw1_23_IRQHandler +cpuss_interrupts_dw1_24_IRQHandler +cpuss_interrupts_dw1_25_IRQHandler +cpuss_interrupts_dw1_26_IRQHandler +cpuss_interrupts_dw1_27_IRQHandler +cpuss_interrupts_dw1_28_IRQHandler +cpuss_interrupts_fault_0_IRQHandler +cpuss_interrupts_fault_1_IRQHandler +cpuss_interrupt_crypto_IRQHandler +cpuss_interrupt_fm_IRQHandler +cpuss_interrupts_cm4_fp_IRQHandler +cpuss_interrupts_cm0_cti_0_IRQHandler +cpuss_interrupts_cm0_cti_1_IRQHandler +cpuss_interrupts_cm4_cti_0_IRQHandler +cpuss_interrupts_cm4_cti_1_IRQHandler +tcpwm_0_interrupts_0_IRQHandler +tcpwm_0_interrupts_1_IRQHandler +tcpwm_0_interrupts_2_IRQHandler +tcpwm_0_interrupts_3_IRQHandler +tcpwm_0_interrupts_4_IRQHandler +tcpwm_0_interrupts_5_IRQHandler +tcpwm_0_interrupts_6_IRQHandler +tcpwm_0_interrupts_7_IRQHandler +tcpwm_1_interrupts_0_IRQHandler +tcpwm_1_interrupts_1_IRQHandler +tcpwm_1_interrupts_2_IRQHandler +tcpwm_1_interrupts_3_IRQHandler +tcpwm_1_interrupts_4_IRQHandler +tcpwm_1_interrupts_5_IRQHandler +tcpwm_1_interrupts_6_IRQHandler +tcpwm_1_interrupts_7_IRQHandler +tcpwm_1_interrupts_8_IRQHandler +tcpwm_1_interrupts_9_IRQHandler +tcpwm_1_interrupts_10_IRQHandler +tcpwm_1_interrupts_11_IRQHandler +tcpwm_1_interrupts_12_IRQHandler +tcpwm_1_interrupts_13_IRQHandler +tcpwm_1_interrupts_14_IRQHandler +tcpwm_1_interrupts_15_IRQHandler +tcpwm_1_interrupts_16_IRQHandler +tcpwm_1_interrupts_17_IRQHandler +tcpwm_1_interrupts_18_IRQHandler +tcpwm_1_interrupts_19_IRQHandler +tcpwm_1_interrupts_20_IRQHandler +tcpwm_1_interrupts_21_IRQHandler +tcpwm_1_interrupts_22_IRQHandler +tcpwm_1_interrupts_23_IRQHandler +pass_interrupt_sar_IRQHandler +audioss_0_interrupt_i2s_IRQHandler +audioss_0_interrupt_pdm_IRQHandler +audioss_1_interrupt_i2s_IRQHandler +profile_interrupt_IRQHandler +smif_interrupt_IRQHandler +usb_interrupt_hi_IRQHandler +usb_interrupt_med_IRQHandler +usb_interrupt_lo_IRQHandler +sdhc_0_interrupt_wakeup_IRQHandler +sdhc_0_interrupt_general_IRQHandler +sdhc_1_interrupt_wakeup_IRQHandler +sdhc_1_interrupt_general_IRQHandler + + B . + ENDP + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + + ALIGN + + ENDIF + + END + + +; [] END OF FILE diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_GCC_ARM/cyb06xxa_cm4_dual.ld b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_GCC_ARM/cyb06xxa_cm4_dual.ld new file mode 100644 index 0000000000..ac40c265d1 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_GCC_ARM/cyb06xxa_cm4_dual.ld @@ -0,0 +1,448 @@ +/***************************************************************************//** +* \file cyb06xxa_cm4_dual.ld +* \version 2.60 +* +* Linker file for the GNU C compiler. +* +* The main purpose of the linker script is to describe how the sections in the +* input files should be mapped into the output file, and to control the memory +* layout of the output file. +* +* \note The entry point location is fixed and starts at 0x10000000. The valid +* application image should be placed there. +* +* \note The linker files included with the PDL template projects must be generic +* and handle all common use cases. Your project may not use every section +* defined in the linker files. In that case you may see warnings during the +* build process. In your project, you can simply comment out or remove the +* relevant code in the linker file. +* +******************************************************************************** +* \copyright +* Copyright 2016-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + +OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) +ENTRY(Reset_Handler) + +#if !defined(MBED_ROM_START) + #define MBED_ROM_START 0x10000400 +#endif + +/* MBED_APP_START is being used by the bootloader build script and +* will be calculate by the system. Without bootloader the MBED_APP_START +* is equal to MBED_ROM_START +*/ +#if !defined(MBED_APP_START) + #define MBED_APP_START MBED_ROM_START +#endif + +#if !defined(MBED_ROM_SIZE) + #define MBED_ROM_SIZE 0x001CFC00 +#endif + +/* MBED_APP_SIZE is being used by the bootloader build script and +* will be calculate by the system. Without bootloader the MBED_APP_SIZE +* is equal to MBED_ROM_SIZE +*/ +#if !defined(MBED_APP_SIZE) + #define MBED_APP_SIZE MBED_ROM_SIZE +#endif + +#if !defined(MBED_RAM_START) + #define MBED_RAM_START 0x08000000 +#endif + +#if !defined(MBED_RAM_SIZE) + #define MBED_RAM_SIZE 0x000D8000 +#endif + +#if !defined(MBED_BOOT_STACK_SIZE) + #define MBED_BOOT_STACK_SIZE 0x400 +#endif + +/* Size of the stack section at the end of CM4 SRAM */ +STACK_SIZE = MBED_BOOT_STACK_SIZE; + +/* Force symbol to be entered in the output file as an undefined symbol. Doing +* this may, for example, trigger linking of additional modules from standard +* libraries. You may list several symbols for each EXTERN, and you may use +* EXTERN multiple times. This command has the same effect as the -u command-line +* option. +*/ +EXTERN(Reset_Handler) + +/* The MEMORY section below describes the location and size of blocks of memory in the target. +* Use this section to specify the memory regions available for allocation. +*/ +MEMORY +{ + /* The ram and flash regions control RAM and flash memory allocation for the CM4 core. + * You can change the memory allocation by editing the 'ram' and 'flash' regions. + * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use. + * Using this memory region for other purposes will lead to unexpected behavior. + * Your changes must be aligned with the corresponding memory regions for CM0+ core in 'xx_cm0plus.ld', + * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.ld'. + */ + ram (rwx) : ORIGIN = MBED_RAM_START, LENGTH = MBED_RAM_SIZE + flash (rx) : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE + + /* This is a 32K flash region used for EEPROM emulation. This region can also be used as the general purpose flash. + * You can assign sections to this memory region for only one of the cores. + * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region. + * Therefore, repurposing this memory region will prevent such middleware from operation. + */ + em_eeprom (rx) : ORIGIN = 0x14000000, LENGTH = 0x8000 /* 32 KB */ + + /* The following regions define device specific memory regions and must not be changed. */ + sflash_user_data (rx) : ORIGIN = 0x16000800, LENGTH = 0x800 /* Supervisory flash: User data */ + sflash_nar (rx) : ORIGIN = 0x16001A00, LENGTH = 0x200 /* Supervisory flash: Normal Access Restrictions (NAR) */ + sflash_public_key (rx) : ORIGIN = 0x16005A00, LENGTH = 0xC00 /* Supervisory flash: Public Key */ + sflash_toc_2 (rx) : ORIGIN = 0x16007C00, LENGTH = 0x200 /* Supervisory flash: Table of Content # 2 */ + sflash_rtoc_2 (rx) : ORIGIN = 0x16007E00, LENGTH = 0x200 /* Supervisory flash: Table of Content # 2 Copy */ + xip (rx) : ORIGIN = 0x18000000, LENGTH = 0x8000000 /* 128 MB */ + efuse (r) : ORIGIN = 0x90700000, LENGTH = 0x100000 /* 1 MB */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ + + +SECTIONS +{ + /* Cortex-M4 application flash area */ + .text ORIGIN(flash) : + { + . = ALIGN(4); + __Vectors = . ; + KEEP(*(.vectors)) + . = ALIGN(4); + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + . = ALIGN(4); + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* Read-only code (constants). */ + *(.rodata .rodata.* .constdata .constdata.* .conststring .conststring.*) + + KEEP(*(.eh_frame*)) + } > flash + + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > flash + + __exidx_start = .; + + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > flash + __exidx_end = .; + + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_psoc6_02_cm4.S */ + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + + /* Copy interrupt vectors from flash to RAM */ + LONG (__Vectors) /* From */ + LONG (__ram_vectors_start__) /* To */ + LONG (__Vectors_End - __Vectors) /* Size */ + + /* Copy data section to RAM */ + LONG (__etext) /* From */ + LONG (__data_start__) /* To */ + LONG (__data_end__ - __data_start__) /* Size */ + + __copy_table_end__ = .; + } > flash + + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_psoc6_02_cm4.S */ + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + __zero_table_end__ = .; + } > flash + + __etext = . ; + + + .ramVectors (NOLOAD) : ALIGN(8) + { + __ram_vectors_start__ = .; + KEEP(*(.ram_vectors)) + __ram_vectors_end__ = .; + } > ram + + + .data __ram_vectors_end__ : AT (__etext) + { + __data_start__ = .; + + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + + KEEP(*(.cy_ramfunc*)) + . = ALIGN(4); + + __data_end__ = .; + + } > ram + + + /* Place variables in the section that should not be initialized during the + * device startup. + */ + .noinit (NOLOAD) : ALIGN(8) + { + KEEP(*(.noinit)) + } > ram + + + /* The uninitialized global or static variables are placed in this section. + * + * The NOLOAD attribute tells linker that .bss section does not consume + * any space in the image. The NOLOAD attribute changes the .bss type to + * NOBITS, and that makes linker to A) not allocate section in memory, and + * A) put information to clear the section with all zeros during application + * loading. + * + * Without the NOLOAD attribute, the .bss section might get PROGBITS type. + * This makes linker to A) allocate zeroed section in memory, and B) copy + * this section to RAM during application loading. + */ + .bss (NOLOAD): + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > ram + + + .heap (NOLOAD): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + . = ORIGIN(ram) + LENGTH(ram) - STACK_SIZE; + __HeapLimit = .; + } > ram + + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(ram) + LENGTH(ram); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") + + + /* Used for the digital signature of the secure application and the Bootloader SDK application. + * The size of the section depends on the required data size. */ + .cy_app_signature ORIGIN(flash) + LENGTH(flash) - 256 : + { + KEEP(*(.cy_app_signature)) + } > flash + + + /* Emulated EEPROM Flash area */ + .cy_em_eeprom : + { + KEEP(*(.cy_em_eeprom)) + } > em_eeprom + + + /* Supervisory Flash: User data */ + .cy_sflash_user_data : + { + KEEP(*(.cy_sflash_user_data)) + } > sflash_user_data + + + /* Supervisory Flash: Normal Access Restrictions (NAR) */ + .cy_sflash_nar : + { + KEEP(*(.cy_sflash_nar)) + } > sflash_nar + + + /* Supervisory Flash: Public Key */ + .cy_sflash_public_key : + { + KEEP(*(.cy_sflash_public_key)) + } > sflash_public_key + + + /* Supervisory Flash: Table of Content # 2 */ + .cy_toc_part2 : + { + KEEP(*(.cy_toc_part2)) + } > sflash_toc_2 + + + /* Supervisory Flash: Table of Content # 2 Copy */ + .cy_rtoc_part2 : + { + KEEP(*(.cy_rtoc_part2)) + } > sflash_rtoc_2 + + + /* Places the code in the Execute in Place (XIP) section. See the smif driver + * documentation for details. + */ + .cy_xip : + { + KEEP(*(.cy_xip)) + } > xip + + + /* eFuse */ + .cy_efuse : + { + KEEP(*(.cy_efuse)) + } > efuse + + + /* These sections are used for additional metadata (silicon revision, + * Silicon/JTAG ID, etc.) storage. + */ + .cymeta 0x90500000 : { KEEP(*(.cymeta)) } :NONE +} + + +/* The following symbols used by the cymcuelftool. */ +/* Flash */ +__cy_memory_0_start = 0x10000000; +__cy_memory_0_length = 0x001D0000; +__cy_memory_0_row_size = 0x200; + +/* Emulated EEPROM Flash area */ +__cy_memory_1_start = 0x14000000; +__cy_memory_1_length = 0x8000; +__cy_memory_1_row_size = 0x200; + +/* Supervisory Flash */ +__cy_memory_2_start = 0x16000000; +__cy_memory_2_length = 0x8000; +__cy_memory_2_row_size = 0x200; + +/* XIP */ +__cy_memory_3_start = 0x18000000; +__cy_memory_3_length = 0x08000000; +__cy_memory_3_row_size = 0x200; + +/* eFuse */ +__cy_memory_4_start = 0x90700000; +__cy_memory_4_length = 0x100000; +__cy_memory_4_row_size = 1; + +/* EOF */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_GCC_ARM/startup_psoc6_02_cm4.S b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_GCC_ARM/startup_psoc6_02_cm4.S new file mode 100644 index 0000000000..1ebcac39f8 --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_GCC_ARM/startup_psoc6_02_cm4.S @@ -0,0 +1,673 @@ +/**************************************************************************//** + * @file startup_psoc6_02_cm4.S + * @brief CMSIS Core Device Startup File for + * ARMCM4 Device Series + * @version V5.00 + * @date 02. March 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + /* Address of the NMI handler */ + #define CY_NMI_HANLDER_ADDR 0x0000000D + + /* The CPU VTOR register */ + #define CY_CPU_VTOR_ADDR 0xE000ED08 + + /* Copy flash vectors and data section to RAM */ + #define __STARTUP_COPY_MULTIPLE + + /* Clear single BSS section */ + #define __STARTUP_CLEAR_BSS + + .syntax unified + .arch armv7-m + + .section .stack + .align 3 +#ifdef __STACK_SIZE + .equ Stack_Size, __STACK_SIZE +#else + .equ Stack_Size, 0x00001000 +#endif + .globl __StackTop + .globl __StackLimit +__StackLimit: + .space Stack_Size + .size __StackLimit, . - __StackLimit +__StackTop: + .size __StackTop, . - __StackTop + + .section .heap + .align 3 +#ifdef __HEAP_SIZE + .equ Heap_Size, __HEAP_SIZE +#else + .equ Heap_Size, 0x00000400 +#endif + .globl __HeapBase + .globl __HeapLimit +__HeapBase: + .if Heap_Size + .space Heap_Size + .endif + .size __HeapBase, . - __HeapBase +__HeapLimit: + .size __HeapLimit, . - __HeapLimit + + .section .vectors + .align 2 + .globl __Vectors +__Vectors: + .long __StackTop /* Top of Stack */ + .long Reset_Handler /* Reset Handler */ + .long CY_NMI_HANLDER_ADDR /* NMI Handler */ + .long HardFault_Handler /* Hard Fault Handler */ + .long MemManage_Handler /* MPU Fault Handler */ + .long BusFault_Handler /* Bus Fault Handler */ + .long UsageFault_Handler /* Usage Fault Handler */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long SVC_Handler /* SVCall Handler */ + .long DebugMon_Handler /* Debug Monitor Handler */ + .long 0 /* Reserved */ + .long PendSV_Handler /* PendSV Handler */ + .long SysTick_Handler /* SysTick Handler */ + + /* External interrupts Description */ + .long ioss_interrupts_gpio_0_IRQHandler /* GPIO Port Interrupt #0 */ + .long ioss_interrupts_gpio_1_IRQHandler /* GPIO Port Interrupt #1 */ + .long ioss_interrupts_gpio_2_IRQHandler /* GPIO Port Interrupt #2 */ + .long ioss_interrupts_gpio_3_IRQHandler /* GPIO Port Interrupt #3 */ + .long ioss_interrupts_gpio_4_IRQHandler /* GPIO Port Interrupt #4 */ + .long ioss_interrupts_gpio_5_IRQHandler /* GPIO Port Interrupt #5 */ + .long ioss_interrupts_gpio_6_IRQHandler /* GPIO Port Interrupt #6 */ + .long ioss_interrupts_gpio_7_IRQHandler /* GPIO Port Interrupt #7 */ + .long ioss_interrupts_gpio_8_IRQHandler /* GPIO Port Interrupt #8 */ + .long ioss_interrupts_gpio_9_IRQHandler /* GPIO Port Interrupt #9 */ + .long ioss_interrupts_gpio_10_IRQHandler /* GPIO Port Interrupt #10 */ + .long ioss_interrupts_gpio_11_IRQHandler /* GPIO Port Interrupt #11 */ + .long ioss_interrupts_gpio_12_IRQHandler /* GPIO Port Interrupt #12 */ + .long ioss_interrupts_gpio_13_IRQHandler /* GPIO Port Interrupt #13 */ + .long ioss_interrupts_gpio_14_IRQHandler /* GPIO Port Interrupt #14 */ + .long ioss_interrupt_gpio_IRQHandler /* GPIO All Ports */ + .long ioss_interrupt_vdd_IRQHandler /* GPIO Supply Detect Interrupt */ + .long lpcomp_interrupt_IRQHandler /* Low Power Comparator Interrupt */ + .long scb_8_interrupt_IRQHandler /* Serial Communication Block #8 (DeepSleep capable) */ + .long srss_interrupt_mcwdt_0_IRQHandler /* Multi Counter Watchdog Timer interrupt */ + .long srss_interrupt_mcwdt_1_IRQHandler /* Multi Counter Watchdog Timer interrupt */ + .long srss_interrupt_backup_IRQHandler /* Backup domain interrupt */ + .long srss_interrupt_IRQHandler /* Other combined Interrupts for SRSS (LVD, WDT, CLKCAL) */ + .long cpuss_interrupts_ipc_0_IRQHandler /* CPUSS Inter Process Communication Interrupt #0 */ + .long cpuss_interrupts_ipc_1_IRQHandler /* CPUSS Inter Process Communication Interrupt #1 */ + .long cpuss_interrupts_ipc_2_IRQHandler /* CPUSS Inter Process Communication Interrupt #2 */ + .long cpuss_interrupts_ipc_3_IRQHandler /* CPUSS Inter Process Communication Interrupt #3 */ + .long cpuss_interrupts_ipc_4_IRQHandler /* CPUSS Inter Process Communication Interrupt #4 */ + .long cpuss_interrupts_ipc_5_IRQHandler /* CPUSS Inter Process Communication Interrupt #5 */ + .long cpuss_interrupts_ipc_6_IRQHandler /* CPUSS Inter Process Communication Interrupt #6 */ + .long cpuss_interrupts_ipc_7_IRQHandler /* CPUSS Inter Process Communication Interrupt #7 */ + .long cpuss_interrupts_ipc_8_IRQHandler /* CPUSS Inter Process Communication Interrupt #8 */ + .long cpuss_interrupts_ipc_9_IRQHandler /* CPUSS Inter Process Communication Interrupt #9 */ + .long cpuss_interrupts_ipc_10_IRQHandler /* CPUSS Inter Process Communication Interrupt #10 */ + .long cpuss_interrupts_ipc_11_IRQHandler /* CPUSS Inter Process Communication Interrupt #11 */ + .long cpuss_interrupts_ipc_12_IRQHandler /* CPUSS Inter Process Communication Interrupt #12 */ + .long cpuss_interrupts_ipc_13_IRQHandler /* CPUSS Inter Process Communication Interrupt #13 */ + .long cpuss_interrupts_ipc_14_IRQHandler /* CPUSS Inter Process Communication Interrupt #14 */ + .long cpuss_interrupts_ipc_15_IRQHandler /* CPUSS Inter Process Communication Interrupt #15 */ + .long scb_0_interrupt_IRQHandler /* Serial Communication Block #0 */ + .long scb_1_interrupt_IRQHandler /* Serial Communication Block #1 */ + .long scb_2_interrupt_IRQHandler /* Serial Communication Block #2 */ + .long scb_3_interrupt_IRQHandler /* Serial Communication Block #3 */ + .long scb_4_interrupt_IRQHandler /* Serial Communication Block #4 */ + .long scb_5_interrupt_IRQHandler /* Serial Communication Block #5 */ + .long scb_6_interrupt_IRQHandler /* Serial Communication Block #6 */ + .long scb_7_interrupt_IRQHandler /* Serial Communication Block #7 */ + .long scb_9_interrupt_IRQHandler /* Serial Communication Block #9 */ + .long scb_10_interrupt_IRQHandler /* Serial Communication Block #10 */ + .long scb_11_interrupt_IRQHandler /* Serial Communication Block #11 */ + .long scb_12_interrupt_IRQHandler /* Serial Communication Block #12 */ + .long csd_interrupt_IRQHandler /* CSD (Capsense) interrupt */ + .long cpuss_interrupts_dmac_0_IRQHandler /* CPUSS DMAC, Channel #0 */ + .long cpuss_interrupts_dmac_1_IRQHandler /* CPUSS DMAC, Channel #1 */ + .long cpuss_interrupts_dmac_2_IRQHandler /* CPUSS DMAC, Channel #2 */ + .long cpuss_interrupts_dmac_3_IRQHandler /* CPUSS DMAC, Channel #3 */ + .long cpuss_interrupts_dw0_0_IRQHandler /* CPUSS DataWire #0, Channel #0 */ + .long cpuss_interrupts_dw0_1_IRQHandler /* CPUSS DataWire #0, Channel #1 */ + .long cpuss_interrupts_dw0_2_IRQHandler /* CPUSS DataWire #0, Channel #2 */ + .long cpuss_interrupts_dw0_3_IRQHandler /* CPUSS DataWire #0, Channel #3 */ + .long cpuss_interrupts_dw0_4_IRQHandler /* CPUSS DataWire #0, Channel #4 */ + .long cpuss_interrupts_dw0_5_IRQHandler /* CPUSS DataWire #0, Channel #5 */ + .long cpuss_interrupts_dw0_6_IRQHandler /* CPUSS DataWire #0, Channel #6 */ + .long cpuss_interrupts_dw0_7_IRQHandler /* CPUSS DataWire #0, Channel #7 */ + .long cpuss_interrupts_dw0_8_IRQHandler /* CPUSS DataWire #0, Channel #8 */ + .long cpuss_interrupts_dw0_9_IRQHandler /* CPUSS DataWire #0, Channel #9 */ + .long cpuss_interrupts_dw0_10_IRQHandler /* CPUSS DataWire #0, Channel #10 */ + .long cpuss_interrupts_dw0_11_IRQHandler /* CPUSS DataWire #0, Channel #11 */ + .long cpuss_interrupts_dw0_12_IRQHandler /* CPUSS DataWire #0, Channel #12 */ + .long cpuss_interrupts_dw0_13_IRQHandler /* CPUSS DataWire #0, Channel #13 */ + .long cpuss_interrupts_dw0_14_IRQHandler /* CPUSS DataWire #0, Channel #14 */ + .long cpuss_interrupts_dw0_15_IRQHandler /* CPUSS DataWire #0, Channel #15 */ + .long cpuss_interrupts_dw0_16_IRQHandler /* CPUSS DataWire #0, Channel #16 */ + .long cpuss_interrupts_dw0_17_IRQHandler /* CPUSS DataWire #0, Channel #17 */ + .long cpuss_interrupts_dw0_18_IRQHandler /* CPUSS DataWire #0, Channel #18 */ + .long cpuss_interrupts_dw0_19_IRQHandler /* CPUSS DataWire #0, Channel #19 */ + .long cpuss_interrupts_dw0_20_IRQHandler /* CPUSS DataWire #0, Channel #20 */ + .long cpuss_interrupts_dw0_21_IRQHandler /* CPUSS DataWire #0, Channel #21 */ + .long cpuss_interrupts_dw0_22_IRQHandler /* CPUSS DataWire #0, Channel #22 */ + .long cpuss_interrupts_dw0_23_IRQHandler /* CPUSS DataWire #0, Channel #23 */ + .long cpuss_interrupts_dw0_24_IRQHandler /* CPUSS DataWire #0, Channel #24 */ + .long cpuss_interrupts_dw0_25_IRQHandler /* CPUSS DataWire #0, Channel #25 */ + .long cpuss_interrupts_dw0_26_IRQHandler /* CPUSS DataWire #0, Channel #26 */ + .long cpuss_interrupts_dw0_27_IRQHandler /* CPUSS DataWire #0, Channel #27 */ + .long cpuss_interrupts_dw0_28_IRQHandler /* CPUSS DataWire #0, Channel #28 */ + .long cpuss_interrupts_dw1_0_IRQHandler /* CPUSS DataWire #1, Channel #0 */ + .long cpuss_interrupts_dw1_1_IRQHandler /* CPUSS DataWire #1, Channel #1 */ + .long cpuss_interrupts_dw1_2_IRQHandler /* CPUSS DataWire #1, Channel #2 */ + .long cpuss_interrupts_dw1_3_IRQHandler /* CPUSS DataWire #1, Channel #3 */ + .long cpuss_interrupts_dw1_4_IRQHandler /* CPUSS DataWire #1, Channel #4 */ + .long cpuss_interrupts_dw1_5_IRQHandler /* CPUSS DataWire #1, Channel #5 */ + .long cpuss_interrupts_dw1_6_IRQHandler /* CPUSS DataWire #1, Channel #6 */ + .long cpuss_interrupts_dw1_7_IRQHandler /* CPUSS DataWire #1, Channel #7 */ + .long cpuss_interrupts_dw1_8_IRQHandler /* CPUSS DataWire #1, Channel #8 */ + .long cpuss_interrupts_dw1_9_IRQHandler /* CPUSS DataWire #1, Channel #9 */ + .long cpuss_interrupts_dw1_10_IRQHandler /* CPUSS DataWire #1, Channel #10 */ + .long cpuss_interrupts_dw1_11_IRQHandler /* CPUSS DataWire #1, Channel #11 */ + .long cpuss_interrupts_dw1_12_IRQHandler /* CPUSS DataWire #1, Channel #12 */ + .long cpuss_interrupts_dw1_13_IRQHandler /* CPUSS DataWire #1, Channel #13 */ + .long cpuss_interrupts_dw1_14_IRQHandler /* CPUSS DataWire #1, Channel #14 */ + .long cpuss_interrupts_dw1_15_IRQHandler /* CPUSS DataWire #1, Channel #15 */ + .long cpuss_interrupts_dw1_16_IRQHandler /* CPUSS DataWire #1, Channel #16 */ + .long cpuss_interrupts_dw1_17_IRQHandler /* CPUSS DataWire #1, Channel #17 */ + .long cpuss_interrupts_dw1_18_IRQHandler /* CPUSS DataWire #1, Channel #18 */ + .long cpuss_interrupts_dw1_19_IRQHandler /* CPUSS DataWire #1, Channel #19 */ + .long cpuss_interrupts_dw1_20_IRQHandler /* CPUSS DataWire #1, Channel #20 */ + .long cpuss_interrupts_dw1_21_IRQHandler /* CPUSS DataWire #1, Channel #21 */ + .long cpuss_interrupts_dw1_22_IRQHandler /* CPUSS DataWire #1, Channel #22 */ + .long cpuss_interrupts_dw1_23_IRQHandler /* CPUSS DataWire #1, Channel #23 */ + .long cpuss_interrupts_dw1_24_IRQHandler /* CPUSS DataWire #1, Channel #24 */ + .long cpuss_interrupts_dw1_25_IRQHandler /* CPUSS DataWire #1, Channel #25 */ + .long cpuss_interrupts_dw1_26_IRQHandler /* CPUSS DataWire #1, Channel #26 */ + .long cpuss_interrupts_dw1_27_IRQHandler /* CPUSS DataWire #1, Channel #27 */ + .long cpuss_interrupts_dw1_28_IRQHandler /* CPUSS DataWire #1, Channel #28 */ + .long cpuss_interrupts_fault_0_IRQHandler /* CPUSS Fault Structure Interrupt #0 */ + .long cpuss_interrupts_fault_1_IRQHandler /* CPUSS Fault Structure Interrupt #1 */ + .long cpuss_interrupt_crypto_IRQHandler /* CRYPTO Accelerator Interrupt */ + .long cpuss_interrupt_fm_IRQHandler /* FLASH Macro Interrupt */ + .long cpuss_interrupts_cm4_fp_IRQHandler /* Floating Point operation fault */ + .long cpuss_interrupts_cm0_cti_0_IRQHandler /* CM0+ CTI #0 */ + .long cpuss_interrupts_cm0_cti_1_IRQHandler /* CM0+ CTI #1 */ + .long cpuss_interrupts_cm4_cti_0_IRQHandler /* CM4 CTI #0 */ + .long cpuss_interrupts_cm4_cti_1_IRQHandler /* CM4 CTI #1 */ + .long tcpwm_0_interrupts_0_IRQHandler /* TCPWM #0, Counter #0 */ + .long tcpwm_0_interrupts_1_IRQHandler /* TCPWM #0, Counter #1 */ + .long tcpwm_0_interrupts_2_IRQHandler /* TCPWM #0, Counter #2 */ + .long tcpwm_0_interrupts_3_IRQHandler /* TCPWM #0, Counter #3 */ + .long tcpwm_0_interrupts_4_IRQHandler /* TCPWM #0, Counter #4 */ + .long tcpwm_0_interrupts_5_IRQHandler /* TCPWM #0, Counter #5 */ + .long tcpwm_0_interrupts_6_IRQHandler /* TCPWM #0, Counter #6 */ + .long tcpwm_0_interrupts_7_IRQHandler /* TCPWM #0, Counter #7 */ + .long tcpwm_1_interrupts_0_IRQHandler /* TCPWM #1, Counter #0 */ + .long tcpwm_1_interrupts_1_IRQHandler /* TCPWM #1, Counter #1 */ + .long tcpwm_1_interrupts_2_IRQHandler /* TCPWM #1, Counter #2 */ + .long tcpwm_1_interrupts_3_IRQHandler /* TCPWM #1, Counter #3 */ + .long tcpwm_1_interrupts_4_IRQHandler /* TCPWM #1, Counter #4 */ + .long tcpwm_1_interrupts_5_IRQHandler /* TCPWM #1, Counter #5 */ + .long tcpwm_1_interrupts_6_IRQHandler /* TCPWM #1, Counter #6 */ + .long tcpwm_1_interrupts_7_IRQHandler /* TCPWM #1, Counter #7 */ + .long tcpwm_1_interrupts_8_IRQHandler /* TCPWM #1, Counter #8 */ + .long tcpwm_1_interrupts_9_IRQHandler /* TCPWM #1, Counter #9 */ + .long tcpwm_1_interrupts_10_IRQHandler /* TCPWM #1, Counter #10 */ + .long tcpwm_1_interrupts_11_IRQHandler /* TCPWM #1, Counter #11 */ + .long tcpwm_1_interrupts_12_IRQHandler /* TCPWM #1, Counter #12 */ + .long tcpwm_1_interrupts_13_IRQHandler /* TCPWM #1, Counter #13 */ + .long tcpwm_1_interrupts_14_IRQHandler /* TCPWM #1, Counter #14 */ + .long tcpwm_1_interrupts_15_IRQHandler /* TCPWM #1, Counter #15 */ + .long tcpwm_1_interrupts_16_IRQHandler /* TCPWM #1, Counter #16 */ + .long tcpwm_1_interrupts_17_IRQHandler /* TCPWM #1, Counter #17 */ + .long tcpwm_1_interrupts_18_IRQHandler /* TCPWM #1, Counter #18 */ + .long tcpwm_1_interrupts_19_IRQHandler /* TCPWM #1, Counter #19 */ + .long tcpwm_1_interrupts_20_IRQHandler /* TCPWM #1, Counter #20 */ + .long tcpwm_1_interrupts_21_IRQHandler /* TCPWM #1, Counter #21 */ + .long tcpwm_1_interrupts_22_IRQHandler /* TCPWM #1, Counter #22 */ + .long tcpwm_1_interrupts_23_IRQHandler /* TCPWM #1, Counter #23 */ + .long pass_interrupt_sar_IRQHandler /* SAR ADC interrupt */ + .long audioss_0_interrupt_i2s_IRQHandler /* I2S0 Audio interrupt */ + .long audioss_0_interrupt_pdm_IRQHandler /* PDM0/PCM0 Audio interrupt */ + .long audioss_1_interrupt_i2s_IRQHandler /* I2S1 Audio interrupt */ + .long profile_interrupt_IRQHandler /* Energy Profiler interrupt */ + .long smif_interrupt_IRQHandler /* Serial Memory Interface interrupt */ + .long usb_interrupt_hi_IRQHandler /* USB Interrupt */ + .long usb_interrupt_med_IRQHandler /* USB Interrupt */ + .long usb_interrupt_lo_IRQHandler /* USB Interrupt */ + .long sdhc_0_interrupt_wakeup_IRQHandler /* SDIO wakeup interrupt for mxsdhc */ + .long sdhc_0_interrupt_general_IRQHandler /* Consolidated interrupt for mxsdhc for everything else */ + .long sdhc_1_interrupt_wakeup_IRQHandler /* EEMC wakeup interrupt for mxsdhc, not used */ + .long sdhc_1_interrupt_general_IRQHandler /* Consolidated interrupt for mxsdhc for everything else */ + + + .size __Vectors, . - __Vectors + .equ __VectorsSize, . - __Vectors + + .section .ram_vectors + .align 2 + .globl __ramVectors +__ramVectors: + .space __VectorsSize + .size __ramVectors, . - __ramVectors + + + .text + .thumb + .thumb_func + .align 2 + + /* + * Device startup customization + * + * Note. The global resources are not yet initialized (for example global variables, peripherals, clocks) + * because this function is executed as the first instruction in the ResetHandler. + * The PDL is also not initialized to use the proper register offsets. + * The user of this function is responsible for initializing the PDL and resources before using them. + */ + .weak Cy_OnResetUser + .func Cy_OnResetUser, Cy_OnResetUser + .type Cy_OnResetUser, %function + +Cy_OnResetUser: + bx lr + .size Cy_OnResetUser, . - Cy_OnResetUser + .endfunc + + /* Reset handler */ + .weak Reset_Handler + .type Reset_Handler, %function + +Reset_Handler: + bl Cy_OnResetUser + cpsid i + +/* Firstly it copies data from read only memory to RAM. There are two schemes + * to copy. One can copy more than one sections. Another can only copy + * one section. The former scheme needs more instructions and read-only + * data to implement than the latter. + * Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */ + +#ifdef __STARTUP_COPY_MULTIPLE +/* Multiple sections scheme. + * + * Between symbol address __copy_table_start__ and __copy_table_end__, + * there are array of triplets, each of which specify: + * offset 0: LMA of start of a section to copy from + * offset 4: VMA of start of a section to copy to + * offset 8: size of the section to copy. Must be multiply of 4 + * + * All addresses must be aligned to 4 bytes boundary. + */ + ldr r4, =__copy_table_start__ + ldr r5, =__copy_table_end__ + +.L_loop0: + cmp r4, r5 + bge .L_loop0_done + ldr r1, [r4] + ldr r2, [r4, #4] + ldr r3, [r4, #8] + +.L_loop0_0: + subs r3, #4 + ittt ge + ldrge r0, [r1, r3] + strge r0, [r2, r3] + bge .L_loop0_0 + + adds r4, #12 + b .L_loop0 + +.L_loop0_done: +#else +/* Single section scheme. + * + * The ranges of copy from/to are specified by following symbols + * __etext: LMA of start of the section to copy from. Usually end of text + * __data_start__: VMA of start of the section to copy to + * __data_end__: VMA of end of the section to copy to + * + * All addresses must be aligned to 4 bytes boundary. + */ + ldr r1, =__etext + ldr r2, =__data_start__ + ldr r3, =__data_end__ + +.L_loop1: + cmp r2, r3 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r2], #4 + blt .L_loop1 +#endif /*__STARTUP_COPY_MULTIPLE */ + +/* This part of work usually is done in C library startup code. Otherwise, + * define this macro to enable it in this startup. + * + * There are two schemes too. One can clear multiple BSS sections. Another + * can only clear one section. The former is more size expensive than the + * latter. + * + * Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former. + * Otherwise define macro __STARTUP_CLEAR_BSS to choose the later. + */ +#ifdef __STARTUP_CLEAR_BSS_MULTIPLE +/* Multiple sections scheme. + * + * Between symbol address __copy_table_start__ and __copy_table_end__, + * there are array of tuples specifying: + * offset 0: Start of a BSS section + * offset 4: Size of this BSS section. Must be multiply of 4 + */ + ldr r3, =__zero_table_start__ + ldr r4, =__zero_table_end__ + +.L_loop2: + cmp r3, r4 + bge .L_loop2_done + ldr r1, [r3] + ldr r2, [r3, #4] + movs r0, 0 + +.L_loop2_0: + subs r2, #4 + itt ge + strge r0, [r1, r2] + bge .L_loop2_0 + + adds r3, #8 + b .L_loop2 +.L_loop2_done: +#elif defined (__STARTUP_CLEAR_BSS) +/* Single BSS section scheme. + * + * The BSS section is specified by following symbols + * __bss_start__: start of the BSS section. + * __bss_end__: end of the BSS section. + * + * Both addresses must be aligned to 4 bytes boundary. + */ + ldr r1, =__bss_start__ + ldr r2, =__bss_end__ + + movs r0, 0 +.L_loop3: + cmp r1, r2 + itt lt + strlt r0, [r1], #4 + blt .L_loop3 +#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */ + + /* Update Vector Table Offset Register. */ + ldr r0, =__ramVectors + ldr r1, =CY_CPU_VTOR_ADDR + str r0, [r1] + dsb 0xF + + /* Enable the FPU if used */ + bl Cy_SystemInitFpuEnable + + bl _start + + /* Should never get here */ + b . + + .pool + .size Reset_Handler, . - Reset_Handler + + .align 1 + .thumb_func + .weak Default_Handler + .type Default_Handler, %function + +Default_Handler: + b . + .size Default_Handler, . - Default_Handler + + + .weak Cy_SysLib_FaultHandler + .type Cy_SysLib_FaultHandler, %function + +Cy_SysLib_FaultHandler: + b . + .size Cy_SysLib_FaultHandler, . - Cy_SysLib_FaultHandler + .type Fault_Handler, %function + +Fault_Handler: + /* Storing LR content for Creator call stack trace */ + push {LR} + movs r0, #4 + mov r1, LR + tst r0, r1 + beq .L_MSP + mrs r0, PSP + b .L_API_call +.L_MSP: + mrs r0, MSP +.L_API_call: + /* Compensation of stack pointer address due to pushing 4 bytes of LR */ + adds r0, r0, #4 + bl Cy_SysLib_FaultHandler + b . + .size Fault_Handler, . - Fault_Handler + +.macro def_fault_Handler fault_handler_name + .weak \fault_handler_name + .set \fault_handler_name, Fault_Handler + .endm + +/* Macro to define default handlers. Default handler + * will be weak symbol and just dead loops. They can be + * overwritten by other handlers */ + .macro def_irq_handler handler_name + .weak \handler_name + .set \handler_name, Default_Handler + .endm + + def_irq_handler NMI_Handler + + def_fault_Handler HardFault_Handler + def_fault_Handler MemManage_Handler + def_fault_Handler BusFault_Handler + def_fault_Handler UsageFault_Handler + + def_irq_handler SVC_Handler + def_irq_handler DebugMon_Handler + def_irq_handler PendSV_Handler + def_irq_handler SysTick_Handler + + def_irq_handler ioss_interrupts_gpio_0_IRQHandler /* GPIO Port Interrupt #0 */ + def_irq_handler ioss_interrupts_gpio_1_IRQHandler /* GPIO Port Interrupt #1 */ + def_irq_handler ioss_interrupts_gpio_2_IRQHandler /* GPIO Port Interrupt #2 */ + def_irq_handler ioss_interrupts_gpio_3_IRQHandler /* GPIO Port Interrupt #3 */ + def_irq_handler ioss_interrupts_gpio_4_IRQHandler /* GPIO Port Interrupt #4 */ + def_irq_handler ioss_interrupts_gpio_5_IRQHandler /* GPIO Port Interrupt #5 */ + def_irq_handler ioss_interrupts_gpio_6_IRQHandler /* GPIO Port Interrupt #6 */ + def_irq_handler ioss_interrupts_gpio_7_IRQHandler /* GPIO Port Interrupt #7 */ + def_irq_handler ioss_interrupts_gpio_8_IRQHandler /* GPIO Port Interrupt #8 */ + def_irq_handler ioss_interrupts_gpio_9_IRQHandler /* GPIO Port Interrupt #9 */ + def_irq_handler ioss_interrupts_gpio_10_IRQHandler /* GPIO Port Interrupt #10 */ + def_irq_handler ioss_interrupts_gpio_11_IRQHandler /* GPIO Port Interrupt #11 */ + def_irq_handler ioss_interrupts_gpio_12_IRQHandler /* GPIO Port Interrupt #12 */ + def_irq_handler ioss_interrupts_gpio_13_IRQHandler /* GPIO Port Interrupt #13 */ + def_irq_handler ioss_interrupts_gpio_14_IRQHandler /* GPIO Port Interrupt #14 */ + def_irq_handler ioss_interrupt_gpio_IRQHandler /* GPIO All Ports */ + def_irq_handler ioss_interrupt_vdd_IRQHandler /* GPIO Supply Detect Interrupt */ + def_irq_handler lpcomp_interrupt_IRQHandler /* Low Power Comparator Interrupt */ + def_irq_handler scb_8_interrupt_IRQHandler /* Serial Communication Block #8 (DeepSleep capable) */ + def_irq_handler srss_interrupt_mcwdt_0_IRQHandler /* Multi Counter Watchdog Timer interrupt */ + def_irq_handler srss_interrupt_mcwdt_1_IRQHandler /* Multi Counter Watchdog Timer interrupt */ + def_irq_handler srss_interrupt_backup_IRQHandler /* Backup domain interrupt */ + def_irq_handler srss_interrupt_IRQHandler /* Other combined Interrupts for SRSS (LVD, WDT, CLKCAL) */ + def_irq_handler cpuss_interrupts_ipc_0_IRQHandler /* CPUSS Inter Process Communication Interrupt #0 */ + def_irq_handler cpuss_interrupts_ipc_1_IRQHandler /* CPUSS Inter Process Communication Interrupt #1 */ + def_irq_handler cpuss_interrupts_ipc_2_IRQHandler /* CPUSS Inter Process Communication Interrupt #2 */ + def_irq_handler cpuss_interrupts_ipc_3_IRQHandler /* CPUSS Inter Process Communication Interrupt #3 */ + def_irq_handler cpuss_interrupts_ipc_4_IRQHandler /* CPUSS Inter Process Communication Interrupt #4 */ + def_irq_handler cpuss_interrupts_ipc_5_IRQHandler /* CPUSS Inter Process Communication Interrupt #5 */ + def_irq_handler cpuss_interrupts_ipc_6_IRQHandler /* CPUSS Inter Process Communication Interrupt #6 */ + def_irq_handler cpuss_interrupts_ipc_7_IRQHandler /* CPUSS Inter Process Communication Interrupt #7 */ + def_irq_handler cpuss_interrupts_ipc_8_IRQHandler /* CPUSS Inter Process Communication Interrupt #8 */ + def_irq_handler cpuss_interrupts_ipc_9_IRQHandler /* CPUSS Inter Process Communication Interrupt #9 */ + def_irq_handler cpuss_interrupts_ipc_10_IRQHandler /* CPUSS Inter Process Communication Interrupt #10 */ + def_irq_handler cpuss_interrupts_ipc_11_IRQHandler /* CPUSS Inter Process Communication Interrupt #11 */ + def_irq_handler cpuss_interrupts_ipc_12_IRQHandler /* CPUSS Inter Process Communication Interrupt #12 */ + def_irq_handler cpuss_interrupts_ipc_13_IRQHandler /* CPUSS Inter Process Communication Interrupt #13 */ + def_irq_handler cpuss_interrupts_ipc_14_IRQHandler /* CPUSS Inter Process Communication Interrupt #14 */ + def_irq_handler cpuss_interrupts_ipc_15_IRQHandler /* CPUSS Inter Process Communication Interrupt #15 */ + def_irq_handler scb_0_interrupt_IRQHandler /* Serial Communication Block #0 */ + def_irq_handler scb_1_interrupt_IRQHandler /* Serial Communication Block #1 */ + def_irq_handler scb_2_interrupt_IRQHandler /* Serial Communication Block #2 */ + def_irq_handler scb_3_interrupt_IRQHandler /* Serial Communication Block #3 */ + def_irq_handler scb_4_interrupt_IRQHandler /* Serial Communication Block #4 */ + def_irq_handler scb_5_interrupt_IRQHandler /* Serial Communication Block #5 */ + def_irq_handler scb_6_interrupt_IRQHandler /* Serial Communication Block #6 */ + def_irq_handler scb_7_interrupt_IRQHandler /* Serial Communication Block #7 */ + def_irq_handler scb_9_interrupt_IRQHandler /* Serial Communication Block #9 */ + def_irq_handler scb_10_interrupt_IRQHandler /* Serial Communication Block #10 */ + def_irq_handler scb_11_interrupt_IRQHandler /* Serial Communication Block #11 */ + def_irq_handler scb_12_interrupt_IRQHandler /* Serial Communication Block #12 */ + def_irq_handler csd_interrupt_IRQHandler /* CSD (Capsense) interrupt */ + def_irq_handler cpuss_interrupts_dmac_0_IRQHandler /* CPUSS DMAC, Channel #0 */ + def_irq_handler cpuss_interrupts_dmac_1_IRQHandler /* CPUSS DMAC, Channel #1 */ + def_irq_handler cpuss_interrupts_dmac_2_IRQHandler /* CPUSS DMAC, Channel #2 */ + def_irq_handler cpuss_interrupts_dmac_3_IRQHandler /* CPUSS DMAC, Channel #3 */ + def_irq_handler cpuss_interrupts_dw0_0_IRQHandler /* CPUSS DataWire #0, Channel #0 */ + def_irq_handler cpuss_interrupts_dw0_1_IRQHandler /* CPUSS DataWire #0, Channel #1 */ + def_irq_handler cpuss_interrupts_dw0_2_IRQHandler /* CPUSS DataWire #0, Channel #2 */ + def_irq_handler cpuss_interrupts_dw0_3_IRQHandler /* CPUSS DataWire #0, Channel #3 */ + def_irq_handler cpuss_interrupts_dw0_4_IRQHandler /* CPUSS DataWire #0, Channel #4 */ + def_irq_handler cpuss_interrupts_dw0_5_IRQHandler /* CPUSS DataWire #0, Channel #5 */ + def_irq_handler cpuss_interrupts_dw0_6_IRQHandler /* CPUSS DataWire #0, Channel #6 */ + def_irq_handler cpuss_interrupts_dw0_7_IRQHandler /* CPUSS DataWire #0, Channel #7 */ + def_irq_handler cpuss_interrupts_dw0_8_IRQHandler /* CPUSS DataWire #0, Channel #8 */ + def_irq_handler cpuss_interrupts_dw0_9_IRQHandler /* CPUSS DataWire #0, Channel #9 */ + def_irq_handler cpuss_interrupts_dw0_10_IRQHandler /* CPUSS DataWire #0, Channel #10 */ + def_irq_handler cpuss_interrupts_dw0_11_IRQHandler /* CPUSS DataWire #0, Channel #11 */ + def_irq_handler cpuss_interrupts_dw0_12_IRQHandler /* CPUSS DataWire #0, Channel #12 */ + def_irq_handler cpuss_interrupts_dw0_13_IRQHandler /* CPUSS DataWire #0, Channel #13 */ + def_irq_handler cpuss_interrupts_dw0_14_IRQHandler /* CPUSS DataWire #0, Channel #14 */ + def_irq_handler cpuss_interrupts_dw0_15_IRQHandler /* CPUSS DataWire #0, Channel #15 */ + def_irq_handler cpuss_interrupts_dw0_16_IRQHandler /* CPUSS DataWire #0, Channel #16 */ + def_irq_handler cpuss_interrupts_dw0_17_IRQHandler /* CPUSS DataWire #0, Channel #17 */ + def_irq_handler cpuss_interrupts_dw0_18_IRQHandler /* CPUSS DataWire #0, Channel #18 */ + def_irq_handler cpuss_interrupts_dw0_19_IRQHandler /* CPUSS DataWire #0, Channel #19 */ + def_irq_handler cpuss_interrupts_dw0_20_IRQHandler /* CPUSS DataWire #0, Channel #20 */ + def_irq_handler cpuss_interrupts_dw0_21_IRQHandler /* CPUSS DataWire #0, Channel #21 */ + def_irq_handler cpuss_interrupts_dw0_22_IRQHandler /* CPUSS DataWire #0, Channel #22 */ + def_irq_handler cpuss_interrupts_dw0_23_IRQHandler /* CPUSS DataWire #0, Channel #23 */ + def_irq_handler cpuss_interrupts_dw0_24_IRQHandler /* CPUSS DataWire #0, Channel #24 */ + def_irq_handler cpuss_interrupts_dw0_25_IRQHandler /* CPUSS DataWire #0, Channel #25 */ + def_irq_handler cpuss_interrupts_dw0_26_IRQHandler /* CPUSS DataWire #0, Channel #26 */ + def_irq_handler cpuss_interrupts_dw0_27_IRQHandler /* CPUSS DataWire #0, Channel #27 */ + def_irq_handler cpuss_interrupts_dw0_28_IRQHandler /* CPUSS DataWire #0, Channel #28 */ + def_irq_handler cpuss_interrupts_dw1_0_IRQHandler /* CPUSS DataWire #1, Channel #0 */ + def_irq_handler cpuss_interrupts_dw1_1_IRQHandler /* CPUSS DataWire #1, Channel #1 */ + def_irq_handler cpuss_interrupts_dw1_2_IRQHandler /* CPUSS DataWire #1, Channel #2 */ + def_irq_handler cpuss_interrupts_dw1_3_IRQHandler /* CPUSS DataWire #1, Channel #3 */ + def_irq_handler cpuss_interrupts_dw1_4_IRQHandler /* CPUSS DataWire #1, Channel #4 */ + def_irq_handler cpuss_interrupts_dw1_5_IRQHandler /* CPUSS DataWire #1, Channel #5 */ + def_irq_handler cpuss_interrupts_dw1_6_IRQHandler /* CPUSS DataWire #1, Channel #6 */ + def_irq_handler cpuss_interrupts_dw1_7_IRQHandler /* CPUSS DataWire #1, Channel #7 */ + def_irq_handler cpuss_interrupts_dw1_8_IRQHandler /* CPUSS DataWire #1, Channel #8 */ + def_irq_handler cpuss_interrupts_dw1_9_IRQHandler /* CPUSS DataWire #1, Channel #9 */ + def_irq_handler cpuss_interrupts_dw1_10_IRQHandler /* CPUSS DataWire #1, Channel #10 */ + def_irq_handler cpuss_interrupts_dw1_11_IRQHandler /* CPUSS DataWire #1, Channel #11 */ + def_irq_handler cpuss_interrupts_dw1_12_IRQHandler /* CPUSS DataWire #1, Channel #12 */ + def_irq_handler cpuss_interrupts_dw1_13_IRQHandler /* CPUSS DataWire #1, Channel #13 */ + def_irq_handler cpuss_interrupts_dw1_14_IRQHandler /* CPUSS DataWire #1, Channel #14 */ + def_irq_handler cpuss_interrupts_dw1_15_IRQHandler /* CPUSS DataWire #1, Channel #15 */ + def_irq_handler cpuss_interrupts_dw1_16_IRQHandler /* CPUSS DataWire #1, Channel #16 */ + def_irq_handler cpuss_interrupts_dw1_17_IRQHandler /* CPUSS DataWire #1, Channel #17 */ + def_irq_handler cpuss_interrupts_dw1_18_IRQHandler /* CPUSS DataWire #1, Channel #18 */ + def_irq_handler cpuss_interrupts_dw1_19_IRQHandler /* CPUSS DataWire #1, Channel #19 */ + def_irq_handler cpuss_interrupts_dw1_20_IRQHandler /* CPUSS DataWire #1, Channel #20 */ + def_irq_handler cpuss_interrupts_dw1_21_IRQHandler /* CPUSS DataWire #1, Channel #21 */ + def_irq_handler cpuss_interrupts_dw1_22_IRQHandler /* CPUSS DataWire #1, Channel #22 */ + def_irq_handler cpuss_interrupts_dw1_23_IRQHandler /* CPUSS DataWire #1, Channel #23 */ + def_irq_handler cpuss_interrupts_dw1_24_IRQHandler /* CPUSS DataWire #1, Channel #24 */ + def_irq_handler cpuss_interrupts_dw1_25_IRQHandler /* CPUSS DataWire #1, Channel #25 */ + def_irq_handler cpuss_interrupts_dw1_26_IRQHandler /* CPUSS DataWire #1, Channel #26 */ + def_irq_handler cpuss_interrupts_dw1_27_IRQHandler /* CPUSS DataWire #1, Channel #27 */ + def_irq_handler cpuss_interrupts_dw1_28_IRQHandler /* CPUSS DataWire #1, Channel #28 */ + def_irq_handler cpuss_interrupts_fault_0_IRQHandler /* CPUSS Fault Structure Interrupt #0 */ + def_irq_handler cpuss_interrupts_fault_1_IRQHandler /* CPUSS Fault Structure Interrupt #1 */ + def_irq_handler cpuss_interrupt_crypto_IRQHandler /* CRYPTO Accelerator Interrupt */ + def_irq_handler cpuss_interrupt_fm_IRQHandler /* FLASH Macro Interrupt */ + def_irq_handler cpuss_interrupts_cm4_fp_IRQHandler /* Floating Point operation fault */ + def_irq_handler cpuss_interrupts_cm0_cti_0_IRQHandler /* CM0+ CTI #0 */ + def_irq_handler cpuss_interrupts_cm0_cti_1_IRQHandler /* CM0+ CTI #1 */ + def_irq_handler cpuss_interrupts_cm4_cti_0_IRQHandler /* CM4 CTI #0 */ + def_irq_handler cpuss_interrupts_cm4_cti_1_IRQHandler /* CM4 CTI #1 */ + def_irq_handler tcpwm_0_interrupts_0_IRQHandler /* TCPWM #0, Counter #0 */ + def_irq_handler tcpwm_0_interrupts_1_IRQHandler /* TCPWM #0, Counter #1 */ + def_irq_handler tcpwm_0_interrupts_2_IRQHandler /* TCPWM #0, Counter #2 */ + def_irq_handler tcpwm_0_interrupts_3_IRQHandler /* TCPWM #0, Counter #3 */ + def_irq_handler tcpwm_0_interrupts_4_IRQHandler /* TCPWM #0, Counter #4 */ + def_irq_handler tcpwm_0_interrupts_5_IRQHandler /* TCPWM #0, Counter #5 */ + def_irq_handler tcpwm_0_interrupts_6_IRQHandler /* TCPWM #0, Counter #6 */ + def_irq_handler tcpwm_0_interrupts_7_IRQHandler /* TCPWM #0, Counter #7 */ + def_irq_handler tcpwm_1_interrupts_0_IRQHandler /* TCPWM #1, Counter #0 */ + def_irq_handler tcpwm_1_interrupts_1_IRQHandler /* TCPWM #1, Counter #1 */ + def_irq_handler tcpwm_1_interrupts_2_IRQHandler /* TCPWM #1, Counter #2 */ + def_irq_handler tcpwm_1_interrupts_3_IRQHandler /* TCPWM #1, Counter #3 */ + def_irq_handler tcpwm_1_interrupts_4_IRQHandler /* TCPWM #1, Counter #4 */ + def_irq_handler tcpwm_1_interrupts_5_IRQHandler /* TCPWM #1, Counter #5 */ + def_irq_handler tcpwm_1_interrupts_6_IRQHandler /* TCPWM #1, Counter #6 */ + def_irq_handler tcpwm_1_interrupts_7_IRQHandler /* TCPWM #1, Counter #7 */ + def_irq_handler tcpwm_1_interrupts_8_IRQHandler /* TCPWM #1, Counter #8 */ + def_irq_handler tcpwm_1_interrupts_9_IRQHandler /* TCPWM #1, Counter #9 */ + def_irq_handler tcpwm_1_interrupts_10_IRQHandler /* TCPWM #1, Counter #10 */ + def_irq_handler tcpwm_1_interrupts_11_IRQHandler /* TCPWM #1, Counter #11 */ + def_irq_handler tcpwm_1_interrupts_12_IRQHandler /* TCPWM #1, Counter #12 */ + def_irq_handler tcpwm_1_interrupts_13_IRQHandler /* TCPWM #1, Counter #13 */ + def_irq_handler tcpwm_1_interrupts_14_IRQHandler /* TCPWM #1, Counter #14 */ + def_irq_handler tcpwm_1_interrupts_15_IRQHandler /* TCPWM #1, Counter #15 */ + def_irq_handler tcpwm_1_interrupts_16_IRQHandler /* TCPWM #1, Counter #16 */ + def_irq_handler tcpwm_1_interrupts_17_IRQHandler /* TCPWM #1, Counter #17 */ + def_irq_handler tcpwm_1_interrupts_18_IRQHandler /* TCPWM #1, Counter #18 */ + def_irq_handler tcpwm_1_interrupts_19_IRQHandler /* TCPWM #1, Counter #19 */ + def_irq_handler tcpwm_1_interrupts_20_IRQHandler /* TCPWM #1, Counter #20 */ + def_irq_handler tcpwm_1_interrupts_21_IRQHandler /* TCPWM #1, Counter #21 */ + def_irq_handler tcpwm_1_interrupts_22_IRQHandler /* TCPWM #1, Counter #22 */ + def_irq_handler tcpwm_1_interrupts_23_IRQHandler /* TCPWM #1, Counter #23 */ + def_irq_handler pass_interrupt_sar_IRQHandler /* SAR ADC interrupt */ + def_irq_handler audioss_0_interrupt_i2s_IRQHandler /* I2S0 Audio interrupt */ + def_irq_handler audioss_0_interrupt_pdm_IRQHandler /* PDM0/PCM0 Audio interrupt */ + def_irq_handler audioss_1_interrupt_i2s_IRQHandler /* I2S1 Audio interrupt */ + def_irq_handler profile_interrupt_IRQHandler /* Energy Profiler interrupt */ + def_irq_handler smif_interrupt_IRQHandler /* Serial Memory Interface interrupt */ + def_irq_handler usb_interrupt_hi_IRQHandler /* USB Interrupt */ + def_irq_handler usb_interrupt_med_IRQHandler /* USB Interrupt */ + def_irq_handler usb_interrupt_lo_IRQHandler /* USB Interrupt */ + def_irq_handler sdhc_0_interrupt_wakeup_IRQHandler /* SDIO wakeup interrupt for mxsdhc */ + def_irq_handler sdhc_0_interrupt_general_IRQHandler /* Consolidated interrupt for mxsdhc for everything else */ + def_irq_handler sdhc_1_interrupt_wakeup_IRQHandler /* EEMC wakeup interrupt for mxsdhc, not used */ + def_irq_handler sdhc_1_interrupt_general_IRQHandler /* Consolidated interrupt for mxsdhc for everything else */ + + .end + + +/* [] END OF FILE */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_IAR/cyb06xxa_cm4_dual.icf b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_IAR/cyb06xxa_cm4_dual.icf new file mode 100644 index 0000000000..dad660234a --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_IAR/cyb06xxa_cm4_dual.icf @@ -0,0 +1,273 @@ +/***************************************************************************//** +* \file cyb06xxa_cm4_dual.icf +* \version 2.60 +* +* Linker file for the IAR compiler. +* +* The main purpose of the linker script is to describe how the sections in the +* input files should be mapped into the output file, and to control the memory +* layout of the output file. +* +* \note The entry point is fixed and starts at 0x10000000. The valid application +* image should be placed there. +* +* \note The linker files included with the PDL template projects must be generic +* and handle all common use cases. Your project may not use every section +* defined in the linker files. In that case you may see warnings during the +* build process. In your project, you can simply comment out or remove the +* relevant code in the linker file. +* +******************************************************************************** +* \copyright +* Copyright 2016-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x00000000; + +if (!isdefinedsymbol(MBED_ROM_START)) { + define symbol MBED_ROM_START = 0x10000400; +} + +/* MBED_APP_START is being used by the bootloader build script and + * will be calculate by the system. Without bootloader the MBED_APP_START + * is equal to MBED_ROM_START + */ +if (!isdefinedsymbol(MBED_APP_START)) { + define symbol MBED_APP_START = MBED_ROM_START; +} + +if (!isdefinedsymbol(MBED_ROM_SIZE)) { + define symbol MBED_ROM_SIZE = 0x001CFC00; +} + +/* MBED_APP_SIZE is being used by the bootloader build script and + * will be calculate by the system. Without bootloader the MBED_APP_SIZE + * is equal to MBED_ROM_SIZE + */ +if (!isdefinedsymbol(MBED_APP_SIZE)) { + define symbol MBED_APP_SIZE = MBED_ROM_SIZE; +} + +if (!isdefinedsymbol(MBED_RAM_START)) { + define symbol MBED_RAM_START = 0x08000000; +} + +if (!isdefinedsymbol(MBED_RAM_SIZE)) { + define symbol MBED_RAM_SIZE = 0x000D8000; +} + +if (!isdefinedsymbol(MBED_BOOT_STACK_SIZE)) { + define symbol MBED_BOOT_STACK_SIZE = 0x400; +} + +/* The symbols below define the location and size of blocks of memory in the target. + * Use these symbols to specify the memory regions available for allocation. + */ + +/* The following symbols control RAM and flash memory allocation for the CM4 core. + * You can change the memory allocation by editing RAM and Flash symbols. + * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use. + * Using this memory region for other purposes will lead to unexpected behavior. + * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf', + * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'. + */ +/* RAM */ +define symbol __ICFEDIT_region_IRAM1_start__ = MBED_RAM_START; +define symbol __ICFEDIT_region_IRAM1_end__ = (MBED_RAM_START + MBED_RAM_SIZE); +/* Flash */ +define symbol __ICFEDIT_region_IROM1_start__ = MBED_APP_START; +define symbol __ICFEDIT_region_IROM1_end__ = (MBED_APP_START + MBED_APP_SIZE); + +/* The following symbols define a 32K flash region used for EEPROM emulation. + * This region can also be used as the general purpose flash. + * You can assign sections to this memory region for only one of the cores. + * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region. + * Therefore, repurposing this memory region will prevent such middleware from operation. + */ +define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000; +define symbol __ICFEDIT_region_IROM2_end__ = 0x14007FFF; + +/* The following symbols define device specific memory regions and must not be changed. */ +/* Supervisory FLASH - User Data */ +define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800; +define symbol __ICFEDIT_region_IROM3_end__ = 0x160007FF; + +/* Supervisory FLASH - Normal Access Restrictions (NAR) */ +define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00; +define symbol __ICFEDIT_region_IROM4_end__ = 0x16001BFF; + +/* Supervisory FLASH - Public Key */ +define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00; +define symbol __ICFEDIT_region_IROM5_end__ = 0x160065FF; + +/* Supervisory FLASH - Table of Content # 2 */ +define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00; +define symbol __ICFEDIT_region_IROM6_end__ = 0x16007DFF; + +/* Supervisory FLASH - Table of Content # 2 Copy */ +define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00; +define symbol __ICFEDIT_region_IROM7_end__ = 0x16007FFF; + +/* eFuse */ +define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000; +define symbol __ICFEDIT_region_IROM8_end__ = 0x907FFFFF; + +/* XIP */ +define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000; +define symbol __ICFEDIT_region_EROM1_end__ = 0x1FFFFFFF; + +define symbol __ICFEDIT_region_EROM2_start__ = 0x0; +define symbol __ICFEDIT_region_EROM2_end__ = 0x0; +define symbol __ICFEDIT_region_EROM3_start__ = 0x0; +define symbol __ICFEDIT_region_EROM3_end__ = 0x0; + + +define symbol __ICFEDIT_region_IRAM2_start__ = 0x0; +define symbol __ICFEDIT_region_IRAM2_end__ = 0x0; +define symbol __ICFEDIT_region_ERAM1_start__ = 0x0; +define symbol __ICFEDIT_region_ERAM1_end__ = 0x0; +define symbol __ICFEDIT_region_ERAM2_start__ = 0x0; +define symbol __ICFEDIT_region_ERAM2_end__ = 0x0; +define symbol __ICFEDIT_region_ERAM3_start__ = 0x0; +define symbol __ICFEDIT_region_ERAM3_end__ = 0x0; +/*-Sizes-*/ +if (!isdefinedsymbol(__STACK_SIZE)) { + define symbol __ICFEDIT_size_cstack__ = MBED_BOOT_STACK_SIZE; +} else { + define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE; +} + +/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */ +if (!isdefinedsymbol(__HEAP_SIZE)) { + define symbol __ICFEDIT_size_heap__ = 0x0400; +} else { + define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE; +} +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__]; +define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__]; +define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__]; +define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__]; +define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__]; +define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__]; +define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__]; +define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__]; +define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__]; +define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__]; + +define block RAM_DATA {readwrite section .data}; +define block RAM_OTHER {readwrite section * }; +define block RAM_NOINIT {readwrite section .noinit}; +define block RAM_BSS {readwrite section .bss}; +define block RAM with fixed order {block RAM_DATA, block RAM_OTHER, block RAM_NOINIT, block RAM_BSS}; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { }; + +define block RO {first section .intvec, readonly}; + +/*-Initializations-*/ +initialize by copy { readwrite }; +do not initialize { section .noinit, section .intvec_ram }; + +/*-Placement-*/ + +/* Flash - Cortex-M4 application */ +place at start of IROM1_region { block RO }; + +/* Used for the digital signature of the secure application and the Bootloader SDK application. */ +".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature }; + +/* Emulated EEPROM Flash area */ +".cy_em_eeprom" : place at start of IROM2_region { section .cy_em_eeprom }; + +/* Supervisory Flash - User Data */ +".cy_sflash_user_data" : place at start of IROM3_region { section .cy_sflash_user_data }; + +/* Supervisory Flash - NAR */ +".cy_sflash_nar" : place at start of IROM4_region { section .cy_sflash_nar }; + +/* Supervisory Flash - Public Key */ +".cy_sflash_public_key" : place at start of IROM5_region { section .cy_sflash_public_key }; + +/* Supervisory Flash - TOC2 */ +".cy_toc_part2" : place at start of IROM6_region { section .cy_toc_part2 }; + +/* Supervisory Flash - RTOC2 */ +".cy_rtoc_part2" : place at start of IROM7_region { section .cy_rtoc_part2 }; + +/* eFuse */ +".cy_efuse" : place at start of IROM8_region { section .cy_efuse }; + +/* Execute in Place (XIP). See the smif driver documentation for details. */ +".cy_xip" : place at start of EROM1_region { section .cy_xip }; + +/* RAM */ +place at start of IRAM1_region { readwrite section .intvec_ram}; +place in IRAM1_region { block RAM}; +place in IRAM1_region { block HEAP}; +place at end of IRAM1_region { block CSTACK }; + +/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */ +".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta }; + + +keep { section .cy_app_signature, + section .cy_em_eeprom, + section .cy_sflash_user_data, + section .cy_sflash_nar, + section .cy_sflash_public_key, + section .cy_toc_part2, + section .cy_rtoc_part2, + section .cy_efuse, + section .cy_xip, + section .cymeta, + }; + + +/* The following symbols used by the cymcuelftool. */ +/* Flash */ +define exported symbol __cy_memory_0_start = 0x10000000; +define exported symbol __cy_memory_0_length = 0x001D0000; +define exported symbol __cy_memory_0_row_size = 0x200; + +/* Emulated EEPROM Flash area */ +define exported symbol __cy_memory_1_start = 0x14000000; +define exported symbol __cy_memory_1_length = 0x8000; +define exported symbol __cy_memory_1_row_size = 0x200; + +/* Supervisory Flash */ +define exported symbol __cy_memory_2_start = 0x16000000; +define exported symbol __cy_memory_2_length = 0x8000; +define exported symbol __cy_memory_2_row_size = 0x200; + +/* XIP */ +define exported symbol __cy_memory_3_start = 0x18000000; +define exported symbol __cy_memory_3_length = 0x08000000; +define exported symbol __cy_memory_3_row_size = 0x200; + +/* eFuse */ +define exported symbol __cy_memory_4_start = 0x90700000; +define exported symbol __cy_memory_4_length = 0x100000; +define exported symbol __cy_memory_4_row_size = 1; + +/* EOF */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_IAR/startup_psoc6_02_cm4.S b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_IAR/startup_psoc6_02_cm4.S new file mode 100644 index 0000000000..3257b6f20c --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/TOOLCHAIN_IAR/startup_psoc6_02_cm4.S @@ -0,0 +1,1263 @@ +;/**************************************************************************//** +; * @file startup_psoc6_02_cm4.S +; * @brief CMSIS Core Device Startup File for +; * ARMCM4 Device Series +; * @version V5.00 +; * @date 08. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + SECTION .intvec_ram:DATA:NOROOT(2) + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + EXTERN Cy_SystemInitFpuEnable + EXTERN __iar_data_init3 + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + PUBLIC __ramVectors + + DATA + +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler + + DCD 0x0000000D ; NMI_Handler is defined in ROM code + DCD HardFault_Handler + DCD MemManage_Handler + DCD BusFault_Handler + DCD UsageFault_Handler +__vector_table_0x1c + DCD 0 + DCD 0 + DCD 0 + DCD 0 + DCD SVC_Handler + DCD DebugMon_Handler + DCD 0 + DCD PendSV_Handler + DCD SysTick_Handler + + ; External interrupts Description + DCD ioss_interrupts_gpio_0_IRQHandler ; GPIO Port Interrupt #0 + DCD ioss_interrupts_gpio_1_IRQHandler ; GPIO Port Interrupt #1 + DCD ioss_interrupts_gpio_2_IRQHandler ; GPIO Port Interrupt #2 + DCD ioss_interrupts_gpio_3_IRQHandler ; GPIO Port Interrupt #3 + DCD ioss_interrupts_gpio_4_IRQHandler ; GPIO Port Interrupt #4 + DCD ioss_interrupts_gpio_5_IRQHandler ; GPIO Port Interrupt #5 + DCD ioss_interrupts_gpio_6_IRQHandler ; GPIO Port Interrupt #6 + DCD ioss_interrupts_gpio_7_IRQHandler ; GPIO Port Interrupt #7 + DCD ioss_interrupts_gpio_8_IRQHandler ; GPIO Port Interrupt #8 + DCD ioss_interrupts_gpio_9_IRQHandler ; GPIO Port Interrupt #9 + DCD ioss_interrupts_gpio_10_IRQHandler ; GPIO Port Interrupt #10 + DCD ioss_interrupts_gpio_11_IRQHandler ; GPIO Port Interrupt #11 + DCD ioss_interrupts_gpio_12_IRQHandler ; GPIO Port Interrupt #12 + DCD ioss_interrupts_gpio_13_IRQHandler ; GPIO Port Interrupt #13 + DCD ioss_interrupts_gpio_14_IRQHandler ; GPIO Port Interrupt #14 + DCD ioss_interrupt_gpio_IRQHandler ; GPIO All Ports + DCD ioss_interrupt_vdd_IRQHandler ; GPIO Supply Detect Interrupt + DCD lpcomp_interrupt_IRQHandler ; Low Power Comparator Interrupt + DCD scb_8_interrupt_IRQHandler ; Serial Communication Block #8 (DeepSleep capable) + DCD srss_interrupt_mcwdt_0_IRQHandler ; Multi Counter Watchdog Timer interrupt + DCD srss_interrupt_mcwdt_1_IRQHandler ; Multi Counter Watchdog Timer interrupt + DCD srss_interrupt_backup_IRQHandler ; Backup domain interrupt + DCD srss_interrupt_IRQHandler ; Other combined Interrupts for SRSS (LVD, WDT, CLKCAL) + DCD cpuss_interrupts_ipc_0_IRQHandler ; CPUSS Inter Process Communication Interrupt #0 + DCD cpuss_interrupts_ipc_1_IRQHandler ; CPUSS Inter Process Communication Interrupt #1 + DCD cpuss_interrupts_ipc_2_IRQHandler ; CPUSS Inter Process Communication Interrupt #2 + DCD cpuss_interrupts_ipc_3_IRQHandler ; CPUSS Inter Process Communication Interrupt #3 + DCD cpuss_interrupts_ipc_4_IRQHandler ; CPUSS Inter Process Communication Interrupt #4 + DCD cpuss_interrupts_ipc_5_IRQHandler ; CPUSS Inter Process Communication Interrupt #5 + DCD cpuss_interrupts_ipc_6_IRQHandler ; CPUSS Inter Process Communication Interrupt #6 + DCD cpuss_interrupts_ipc_7_IRQHandler ; CPUSS Inter Process Communication Interrupt #7 + DCD cpuss_interrupts_ipc_8_IRQHandler ; CPUSS Inter Process Communication Interrupt #8 + DCD cpuss_interrupts_ipc_9_IRQHandler ; CPUSS Inter Process Communication Interrupt #9 + DCD cpuss_interrupts_ipc_10_IRQHandler ; CPUSS Inter Process Communication Interrupt #10 + DCD cpuss_interrupts_ipc_11_IRQHandler ; CPUSS Inter Process Communication Interrupt #11 + DCD cpuss_interrupts_ipc_12_IRQHandler ; CPUSS Inter Process Communication Interrupt #12 + DCD cpuss_interrupts_ipc_13_IRQHandler ; CPUSS Inter Process Communication Interrupt #13 + DCD cpuss_interrupts_ipc_14_IRQHandler ; CPUSS Inter Process Communication Interrupt #14 + DCD cpuss_interrupts_ipc_15_IRQHandler ; CPUSS Inter Process Communication Interrupt #15 + DCD scb_0_interrupt_IRQHandler ; Serial Communication Block #0 + DCD scb_1_interrupt_IRQHandler ; Serial Communication Block #1 + DCD scb_2_interrupt_IRQHandler ; Serial Communication Block #2 + DCD scb_3_interrupt_IRQHandler ; Serial Communication Block #3 + DCD scb_4_interrupt_IRQHandler ; Serial Communication Block #4 + DCD scb_5_interrupt_IRQHandler ; Serial Communication Block #5 + DCD scb_6_interrupt_IRQHandler ; Serial Communication Block #6 + DCD scb_7_interrupt_IRQHandler ; Serial Communication Block #7 + DCD scb_9_interrupt_IRQHandler ; Serial Communication Block #9 + DCD scb_10_interrupt_IRQHandler ; Serial Communication Block #10 + DCD scb_11_interrupt_IRQHandler ; Serial Communication Block #11 + DCD scb_12_interrupt_IRQHandler ; Serial Communication Block #12 + DCD csd_interrupt_IRQHandler ; CSD (Capsense) interrupt + DCD cpuss_interrupts_dmac_0_IRQHandler ; CPUSS DMAC, Channel #0 + DCD cpuss_interrupts_dmac_1_IRQHandler ; CPUSS DMAC, Channel #1 + DCD cpuss_interrupts_dmac_2_IRQHandler ; CPUSS DMAC, Channel #2 + DCD cpuss_interrupts_dmac_3_IRQHandler ; CPUSS DMAC, Channel #3 + DCD cpuss_interrupts_dw0_0_IRQHandler ; CPUSS DataWire #0, Channel #0 + DCD cpuss_interrupts_dw0_1_IRQHandler ; CPUSS DataWire #0, Channel #1 + DCD cpuss_interrupts_dw0_2_IRQHandler ; CPUSS DataWire #0, Channel #2 + DCD cpuss_interrupts_dw0_3_IRQHandler ; CPUSS DataWire #0, Channel #3 + DCD cpuss_interrupts_dw0_4_IRQHandler ; CPUSS DataWire #0, Channel #4 + DCD cpuss_interrupts_dw0_5_IRQHandler ; CPUSS DataWire #0, Channel #5 + DCD cpuss_interrupts_dw0_6_IRQHandler ; CPUSS DataWire #0, Channel #6 + DCD cpuss_interrupts_dw0_7_IRQHandler ; CPUSS DataWire #0, Channel #7 + DCD cpuss_interrupts_dw0_8_IRQHandler ; CPUSS DataWire #0, Channel #8 + DCD cpuss_interrupts_dw0_9_IRQHandler ; CPUSS DataWire #0, Channel #9 + DCD cpuss_interrupts_dw0_10_IRQHandler ; CPUSS DataWire #0, Channel #10 + DCD cpuss_interrupts_dw0_11_IRQHandler ; CPUSS DataWire #0, Channel #11 + DCD cpuss_interrupts_dw0_12_IRQHandler ; CPUSS DataWire #0, Channel #12 + DCD cpuss_interrupts_dw0_13_IRQHandler ; CPUSS DataWire #0, Channel #13 + DCD cpuss_interrupts_dw0_14_IRQHandler ; CPUSS DataWire #0, Channel #14 + DCD cpuss_interrupts_dw0_15_IRQHandler ; CPUSS DataWire #0, Channel #15 + DCD cpuss_interrupts_dw0_16_IRQHandler ; CPUSS DataWire #0, Channel #16 + DCD cpuss_interrupts_dw0_17_IRQHandler ; CPUSS DataWire #0, Channel #17 + DCD cpuss_interrupts_dw0_18_IRQHandler ; CPUSS DataWire #0, Channel #18 + DCD cpuss_interrupts_dw0_19_IRQHandler ; CPUSS DataWire #0, Channel #19 + DCD cpuss_interrupts_dw0_20_IRQHandler ; CPUSS DataWire #0, Channel #20 + DCD cpuss_interrupts_dw0_21_IRQHandler ; CPUSS DataWire #0, Channel #21 + DCD cpuss_interrupts_dw0_22_IRQHandler ; CPUSS DataWire #0, Channel #22 + DCD cpuss_interrupts_dw0_23_IRQHandler ; CPUSS DataWire #0, Channel #23 + DCD cpuss_interrupts_dw0_24_IRQHandler ; CPUSS DataWire #0, Channel #24 + DCD cpuss_interrupts_dw0_25_IRQHandler ; CPUSS DataWire #0, Channel #25 + DCD cpuss_interrupts_dw0_26_IRQHandler ; CPUSS DataWire #0, Channel #26 + DCD cpuss_interrupts_dw0_27_IRQHandler ; CPUSS DataWire #0, Channel #27 + DCD cpuss_interrupts_dw0_28_IRQHandler ; CPUSS DataWire #0, Channel #28 + DCD cpuss_interrupts_dw1_0_IRQHandler ; CPUSS DataWire #1, Channel #0 + DCD cpuss_interrupts_dw1_1_IRQHandler ; CPUSS DataWire #1, Channel #1 + DCD cpuss_interrupts_dw1_2_IRQHandler ; CPUSS DataWire #1, Channel #2 + DCD cpuss_interrupts_dw1_3_IRQHandler ; CPUSS DataWire #1, Channel #3 + DCD cpuss_interrupts_dw1_4_IRQHandler ; CPUSS DataWire #1, Channel #4 + DCD cpuss_interrupts_dw1_5_IRQHandler ; CPUSS DataWire #1, Channel #5 + DCD cpuss_interrupts_dw1_6_IRQHandler ; CPUSS DataWire #1, Channel #6 + DCD cpuss_interrupts_dw1_7_IRQHandler ; CPUSS DataWire #1, Channel #7 + DCD cpuss_interrupts_dw1_8_IRQHandler ; CPUSS DataWire #1, Channel #8 + DCD cpuss_interrupts_dw1_9_IRQHandler ; CPUSS DataWire #1, Channel #9 + DCD cpuss_interrupts_dw1_10_IRQHandler ; CPUSS DataWire #1, Channel #10 + DCD cpuss_interrupts_dw1_11_IRQHandler ; CPUSS DataWire #1, Channel #11 + DCD cpuss_interrupts_dw1_12_IRQHandler ; CPUSS DataWire #1, Channel #12 + DCD cpuss_interrupts_dw1_13_IRQHandler ; CPUSS DataWire #1, Channel #13 + DCD cpuss_interrupts_dw1_14_IRQHandler ; CPUSS DataWire #1, Channel #14 + DCD cpuss_interrupts_dw1_15_IRQHandler ; CPUSS DataWire #1, Channel #15 + DCD cpuss_interrupts_dw1_16_IRQHandler ; CPUSS DataWire #1, Channel #16 + DCD cpuss_interrupts_dw1_17_IRQHandler ; CPUSS DataWire #1, Channel #17 + DCD cpuss_interrupts_dw1_18_IRQHandler ; CPUSS DataWire #1, Channel #18 + DCD cpuss_interrupts_dw1_19_IRQHandler ; CPUSS DataWire #1, Channel #19 + DCD cpuss_interrupts_dw1_20_IRQHandler ; CPUSS DataWire #1, Channel #20 + DCD cpuss_interrupts_dw1_21_IRQHandler ; CPUSS DataWire #1, Channel #21 + DCD cpuss_interrupts_dw1_22_IRQHandler ; CPUSS DataWire #1, Channel #22 + DCD cpuss_interrupts_dw1_23_IRQHandler ; CPUSS DataWire #1, Channel #23 + DCD cpuss_interrupts_dw1_24_IRQHandler ; CPUSS DataWire #1, Channel #24 + DCD cpuss_interrupts_dw1_25_IRQHandler ; CPUSS DataWire #1, Channel #25 + DCD cpuss_interrupts_dw1_26_IRQHandler ; CPUSS DataWire #1, Channel #26 + DCD cpuss_interrupts_dw1_27_IRQHandler ; CPUSS DataWire #1, Channel #27 + DCD cpuss_interrupts_dw1_28_IRQHandler ; CPUSS DataWire #1, Channel #28 + DCD cpuss_interrupts_fault_0_IRQHandler ; CPUSS Fault Structure Interrupt #0 + DCD cpuss_interrupts_fault_1_IRQHandler ; CPUSS Fault Structure Interrupt #1 + DCD cpuss_interrupt_crypto_IRQHandler ; CRYPTO Accelerator Interrupt + DCD cpuss_interrupt_fm_IRQHandler ; FLASH Macro Interrupt + DCD cpuss_interrupts_cm4_fp_IRQHandler ; Floating Point operation fault + DCD cpuss_interrupts_cm0_cti_0_IRQHandler ; CM0+ CTI #0 + DCD cpuss_interrupts_cm0_cti_1_IRQHandler ; CM0+ CTI #1 + DCD cpuss_interrupts_cm4_cti_0_IRQHandler ; CM4 CTI #0 + DCD cpuss_interrupts_cm4_cti_1_IRQHandler ; CM4 CTI #1 + DCD tcpwm_0_interrupts_0_IRQHandler ; TCPWM #0, Counter #0 + DCD tcpwm_0_interrupts_1_IRQHandler ; TCPWM #0, Counter #1 + DCD tcpwm_0_interrupts_2_IRQHandler ; TCPWM #0, Counter #2 + DCD tcpwm_0_interrupts_3_IRQHandler ; TCPWM #0, Counter #3 + DCD tcpwm_0_interrupts_4_IRQHandler ; TCPWM #0, Counter #4 + DCD tcpwm_0_interrupts_5_IRQHandler ; TCPWM #0, Counter #5 + DCD tcpwm_0_interrupts_6_IRQHandler ; TCPWM #0, Counter #6 + DCD tcpwm_0_interrupts_7_IRQHandler ; TCPWM #0, Counter #7 + DCD tcpwm_1_interrupts_0_IRQHandler ; TCPWM #1, Counter #0 + DCD tcpwm_1_interrupts_1_IRQHandler ; TCPWM #1, Counter #1 + DCD tcpwm_1_interrupts_2_IRQHandler ; TCPWM #1, Counter #2 + DCD tcpwm_1_interrupts_3_IRQHandler ; TCPWM #1, Counter #3 + DCD tcpwm_1_interrupts_4_IRQHandler ; TCPWM #1, Counter #4 + DCD tcpwm_1_interrupts_5_IRQHandler ; TCPWM #1, Counter #5 + DCD tcpwm_1_interrupts_6_IRQHandler ; TCPWM #1, Counter #6 + DCD tcpwm_1_interrupts_7_IRQHandler ; TCPWM #1, Counter #7 + DCD tcpwm_1_interrupts_8_IRQHandler ; TCPWM #1, Counter #8 + DCD tcpwm_1_interrupts_9_IRQHandler ; TCPWM #1, Counter #9 + DCD tcpwm_1_interrupts_10_IRQHandler ; TCPWM #1, Counter #10 + DCD tcpwm_1_interrupts_11_IRQHandler ; TCPWM #1, Counter #11 + DCD tcpwm_1_interrupts_12_IRQHandler ; TCPWM #1, Counter #12 + DCD tcpwm_1_interrupts_13_IRQHandler ; TCPWM #1, Counter #13 + DCD tcpwm_1_interrupts_14_IRQHandler ; TCPWM #1, Counter #14 + DCD tcpwm_1_interrupts_15_IRQHandler ; TCPWM #1, Counter #15 + DCD tcpwm_1_interrupts_16_IRQHandler ; TCPWM #1, Counter #16 + DCD tcpwm_1_interrupts_17_IRQHandler ; TCPWM #1, Counter #17 + DCD tcpwm_1_interrupts_18_IRQHandler ; TCPWM #1, Counter #18 + DCD tcpwm_1_interrupts_19_IRQHandler ; TCPWM #1, Counter #19 + DCD tcpwm_1_interrupts_20_IRQHandler ; TCPWM #1, Counter #20 + DCD tcpwm_1_interrupts_21_IRQHandler ; TCPWM #1, Counter #21 + DCD tcpwm_1_interrupts_22_IRQHandler ; TCPWM #1, Counter #22 + DCD tcpwm_1_interrupts_23_IRQHandler ; TCPWM #1, Counter #23 + DCD pass_interrupt_sar_IRQHandler ; SAR ADC interrupt + DCD audioss_0_interrupt_i2s_IRQHandler ; I2S0 Audio interrupt + DCD audioss_0_interrupt_pdm_IRQHandler ; PDM0/PCM0 Audio interrupt + DCD audioss_1_interrupt_i2s_IRQHandler ; I2S1 Audio interrupt + DCD profile_interrupt_IRQHandler ; Energy Profiler interrupt + DCD smif_interrupt_IRQHandler ; Serial Memory Interface interrupt + DCD usb_interrupt_hi_IRQHandler ; USB Interrupt + DCD usb_interrupt_med_IRQHandler ; USB Interrupt + DCD usb_interrupt_lo_IRQHandler ; USB Interrupt + DCD sdhc_0_interrupt_wakeup_IRQHandler ; SDIO wakeup interrupt for mxsdhc + DCD sdhc_0_interrupt_general_IRQHandler ; Consolidated interrupt for mxsdhc for everything else + DCD sdhc_1_interrupt_wakeup_IRQHandler ; EEMC wakeup interrupt for mxsdhc, not used + DCD sdhc_1_interrupt_general_IRQHandler ; Consolidated interrupt for mxsdhc for everything else + +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + + SECTION .intvec_ram:DATA:REORDER:NOROOT(2) +__ramVectors + DS32 __Vectors_Size + + + THUMB + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default handlers +;; + PUBWEAK Default_Handler + SECTION .text:CODE:REORDER:NOROOT(2) +Default_Handler + B Default_Handler + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Weak function for startup customization +;; +;; Note. The global resources are not yet initialized (for example global variables, peripherals, clocks) +;; because this function is executed as the first instruction in the ResetHandler. +;; The PDL is also not initialized to use the proper register offsets. +;; The user of this function is responsible for initializing the PDL and resources before using them. +;; + PUBWEAK Cy_OnResetUser + SECTION .text:CODE:REORDER:NOROOT(2) +Cy_OnResetUser + BX LR + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Define strong version to return zero for +;; __iar_program_start to skip data sections +;; initialization. +;; + PUBLIC __low_level_init + SECTION .text:CODE:REORDER:NOROOT(2) +__low_level_init + MOVS R0, #0 + BX LR + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + PUBWEAK Reset_Handler + SECTION .text:CODE:REORDER:NOROOT(2) +Reset_Handler + + ; Define strong function for startup customization + LDR R0, =Cy_OnResetUser + BLX R0 + + ; Disable global interrupts + CPSID I + + ; Copy vectors from ROM to RAM + LDR r1, =__vector_table + LDR r0, =__ramVectors + LDR r2, =__Vectors_Size +intvec_copy + LDR r3, [r1] + STR r3, [r0] + ADDS r0, r0, #4 + ADDS r1, r1, #4 + SUBS r2, r2, #1 + CMP r2, #0 + BNE intvec_copy + + ; Update Vector Table Offset Register + LDR r0, =__ramVectors + LDR r1, =0xE000ED08 + STR r0, [r1] + dsb + + ; Initialize data sections + LDR R0, =__iar_data_init3 + BLX R0 + + LDR R0, =SystemInit + BLX R0 + + LDR R0, =__iar_program_start + BLX R0 + +; Should never get here +Cy_Main_Exited + B Cy_Main_Exited + + + PUBWEAK NMI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK Cy_SysLib_FaultHandler + SECTION .text:CODE:REORDER:NOROOT(1) +Cy_SysLib_FaultHandler + B Cy_SysLib_FaultHandler + + PUBWEAK HardFault_Wrapper + SECTION .text:CODE:REORDER:NOROOT(1) +HardFault_Wrapper + IMPORT Cy_SysLib_FaultHandler + movs r0, #4 + mov r1, LR + tst r0, r1 + beq L_MSP + mrs r0, PSP + b L_API_call +L_MSP + mrs r0, MSP +L_API_call + ; Storing LR content for Creator call stack trace + push {LR} + bl Cy_SysLib_FaultHandler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HardFault_Handler + B HardFault_Wrapper + + PUBWEAK MemManage_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +MemManage_Handler + B HardFault_Wrapper + + PUBWEAK BusFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BusFault_Handler + B HardFault_Wrapper + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UsageFault_Handler + B HardFault_Wrapper + + PUBWEAK SVC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SysTick_Handler + B SysTick_Handler + + + ; External interrupts + PUBWEAK ioss_interrupts_gpio_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_0_IRQHandler + B ioss_interrupts_gpio_0_IRQHandler + + PUBWEAK ioss_interrupts_gpio_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_1_IRQHandler + B ioss_interrupts_gpio_1_IRQHandler + + PUBWEAK ioss_interrupts_gpio_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_2_IRQHandler + B ioss_interrupts_gpio_2_IRQHandler + + PUBWEAK ioss_interrupts_gpio_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_3_IRQHandler + B ioss_interrupts_gpio_3_IRQHandler + + PUBWEAK ioss_interrupts_gpio_4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_4_IRQHandler + B ioss_interrupts_gpio_4_IRQHandler + + PUBWEAK ioss_interrupts_gpio_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_5_IRQHandler + B ioss_interrupts_gpio_5_IRQHandler + + PUBWEAK ioss_interrupts_gpio_6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_6_IRQHandler + B ioss_interrupts_gpio_6_IRQHandler + + PUBWEAK ioss_interrupts_gpio_7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_7_IRQHandler + B ioss_interrupts_gpio_7_IRQHandler + + PUBWEAK ioss_interrupts_gpio_8_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_8_IRQHandler + B ioss_interrupts_gpio_8_IRQHandler + + PUBWEAK ioss_interrupts_gpio_9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_9_IRQHandler + B ioss_interrupts_gpio_9_IRQHandler + + PUBWEAK ioss_interrupts_gpio_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_10_IRQHandler + B ioss_interrupts_gpio_10_IRQHandler + + PUBWEAK ioss_interrupts_gpio_11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_11_IRQHandler + B ioss_interrupts_gpio_11_IRQHandler + + PUBWEAK ioss_interrupts_gpio_12_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_12_IRQHandler + B ioss_interrupts_gpio_12_IRQHandler + + PUBWEAK ioss_interrupts_gpio_13_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_13_IRQHandler + B ioss_interrupts_gpio_13_IRQHandler + + PUBWEAK ioss_interrupts_gpio_14_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupts_gpio_14_IRQHandler + B ioss_interrupts_gpio_14_IRQHandler + + PUBWEAK ioss_interrupt_gpio_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupt_gpio_IRQHandler + B ioss_interrupt_gpio_IRQHandler + + PUBWEAK ioss_interrupt_vdd_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ioss_interrupt_vdd_IRQHandler + B ioss_interrupt_vdd_IRQHandler + + PUBWEAK lpcomp_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +lpcomp_interrupt_IRQHandler + B lpcomp_interrupt_IRQHandler + + PUBWEAK scb_8_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_8_interrupt_IRQHandler + B scb_8_interrupt_IRQHandler + + PUBWEAK srss_interrupt_mcwdt_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +srss_interrupt_mcwdt_0_IRQHandler + B srss_interrupt_mcwdt_0_IRQHandler + + PUBWEAK srss_interrupt_mcwdt_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +srss_interrupt_mcwdt_1_IRQHandler + B srss_interrupt_mcwdt_1_IRQHandler + + PUBWEAK srss_interrupt_backup_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +srss_interrupt_backup_IRQHandler + B srss_interrupt_backup_IRQHandler + + PUBWEAK srss_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +srss_interrupt_IRQHandler + B srss_interrupt_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_0_IRQHandler + B cpuss_interrupts_ipc_0_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_1_IRQHandler + B cpuss_interrupts_ipc_1_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_2_IRQHandler + B cpuss_interrupts_ipc_2_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_3_IRQHandler + B cpuss_interrupts_ipc_3_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_4_IRQHandler + B cpuss_interrupts_ipc_4_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_5_IRQHandler + B cpuss_interrupts_ipc_5_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_6_IRQHandler + B cpuss_interrupts_ipc_6_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_7_IRQHandler + B cpuss_interrupts_ipc_7_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_8_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_8_IRQHandler + B cpuss_interrupts_ipc_8_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_9_IRQHandler + B cpuss_interrupts_ipc_9_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_10_IRQHandler + B cpuss_interrupts_ipc_10_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_11_IRQHandler + B cpuss_interrupts_ipc_11_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_12_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_12_IRQHandler + B cpuss_interrupts_ipc_12_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_13_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_13_IRQHandler + B cpuss_interrupts_ipc_13_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_14_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_14_IRQHandler + B cpuss_interrupts_ipc_14_IRQHandler + + PUBWEAK cpuss_interrupts_ipc_15_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_ipc_15_IRQHandler + B cpuss_interrupts_ipc_15_IRQHandler + + PUBWEAK scb_0_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_0_interrupt_IRQHandler + B scb_0_interrupt_IRQHandler + + PUBWEAK scb_1_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_1_interrupt_IRQHandler + B scb_1_interrupt_IRQHandler + + PUBWEAK scb_2_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_2_interrupt_IRQHandler + B scb_2_interrupt_IRQHandler + + PUBWEAK scb_3_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_3_interrupt_IRQHandler + B scb_3_interrupt_IRQHandler + + PUBWEAK scb_4_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_4_interrupt_IRQHandler + B scb_4_interrupt_IRQHandler + + PUBWEAK scb_5_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_5_interrupt_IRQHandler + B scb_5_interrupt_IRQHandler + + PUBWEAK scb_6_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_6_interrupt_IRQHandler + B scb_6_interrupt_IRQHandler + + PUBWEAK scb_7_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_7_interrupt_IRQHandler + B scb_7_interrupt_IRQHandler + + PUBWEAK scb_9_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_9_interrupt_IRQHandler + B scb_9_interrupt_IRQHandler + + PUBWEAK scb_10_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_10_interrupt_IRQHandler + B scb_10_interrupt_IRQHandler + + PUBWEAK scb_11_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_11_interrupt_IRQHandler + B scb_11_interrupt_IRQHandler + + PUBWEAK scb_12_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +scb_12_interrupt_IRQHandler + B scb_12_interrupt_IRQHandler + + PUBWEAK csd_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +csd_interrupt_IRQHandler + B csd_interrupt_IRQHandler + + PUBWEAK cpuss_interrupts_dmac_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dmac_0_IRQHandler + B cpuss_interrupts_dmac_0_IRQHandler + + PUBWEAK cpuss_interrupts_dmac_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dmac_1_IRQHandler + B cpuss_interrupts_dmac_1_IRQHandler + + PUBWEAK cpuss_interrupts_dmac_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dmac_2_IRQHandler + B cpuss_interrupts_dmac_2_IRQHandler + + PUBWEAK cpuss_interrupts_dmac_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dmac_3_IRQHandler + B cpuss_interrupts_dmac_3_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_0_IRQHandler + B cpuss_interrupts_dw0_0_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_1_IRQHandler + B cpuss_interrupts_dw0_1_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_2_IRQHandler + B cpuss_interrupts_dw0_2_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_3_IRQHandler + B cpuss_interrupts_dw0_3_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_4_IRQHandler + B cpuss_interrupts_dw0_4_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_5_IRQHandler + B cpuss_interrupts_dw0_5_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_6_IRQHandler + B cpuss_interrupts_dw0_6_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_7_IRQHandler + B cpuss_interrupts_dw0_7_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_8_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_8_IRQHandler + B cpuss_interrupts_dw0_8_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_9_IRQHandler + B cpuss_interrupts_dw0_9_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_10_IRQHandler + B cpuss_interrupts_dw0_10_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_11_IRQHandler + B cpuss_interrupts_dw0_11_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_12_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_12_IRQHandler + B cpuss_interrupts_dw0_12_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_13_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_13_IRQHandler + B cpuss_interrupts_dw0_13_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_14_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_14_IRQHandler + B cpuss_interrupts_dw0_14_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_15_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_15_IRQHandler + B cpuss_interrupts_dw0_15_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_16_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_16_IRQHandler + B cpuss_interrupts_dw0_16_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_17_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_17_IRQHandler + B cpuss_interrupts_dw0_17_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_18_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_18_IRQHandler + B cpuss_interrupts_dw0_18_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_19_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_19_IRQHandler + B cpuss_interrupts_dw0_19_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_20_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_20_IRQHandler + B cpuss_interrupts_dw0_20_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_21_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_21_IRQHandler + B cpuss_interrupts_dw0_21_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_22_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_22_IRQHandler + B cpuss_interrupts_dw0_22_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_23_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_23_IRQHandler + B cpuss_interrupts_dw0_23_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_24_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_24_IRQHandler + B cpuss_interrupts_dw0_24_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_25_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_25_IRQHandler + B cpuss_interrupts_dw0_25_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_26_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_26_IRQHandler + B cpuss_interrupts_dw0_26_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_27_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_27_IRQHandler + B cpuss_interrupts_dw0_27_IRQHandler + + PUBWEAK cpuss_interrupts_dw0_28_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw0_28_IRQHandler + B cpuss_interrupts_dw0_28_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_0_IRQHandler + B cpuss_interrupts_dw1_0_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_1_IRQHandler + B cpuss_interrupts_dw1_1_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_2_IRQHandler + B cpuss_interrupts_dw1_2_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_3_IRQHandler + B cpuss_interrupts_dw1_3_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_4_IRQHandler + B cpuss_interrupts_dw1_4_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_5_IRQHandler + B cpuss_interrupts_dw1_5_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_6_IRQHandler + B cpuss_interrupts_dw1_6_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_7_IRQHandler + B cpuss_interrupts_dw1_7_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_8_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_8_IRQHandler + B cpuss_interrupts_dw1_8_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_9_IRQHandler + B cpuss_interrupts_dw1_9_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_10_IRQHandler + B cpuss_interrupts_dw1_10_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_11_IRQHandler + B cpuss_interrupts_dw1_11_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_12_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_12_IRQHandler + B cpuss_interrupts_dw1_12_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_13_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_13_IRQHandler + B cpuss_interrupts_dw1_13_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_14_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_14_IRQHandler + B cpuss_interrupts_dw1_14_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_15_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_15_IRQHandler + B cpuss_interrupts_dw1_15_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_16_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_16_IRQHandler + B cpuss_interrupts_dw1_16_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_17_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_17_IRQHandler + B cpuss_interrupts_dw1_17_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_18_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_18_IRQHandler + B cpuss_interrupts_dw1_18_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_19_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_19_IRQHandler + B cpuss_interrupts_dw1_19_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_20_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_20_IRQHandler + B cpuss_interrupts_dw1_20_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_21_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_21_IRQHandler + B cpuss_interrupts_dw1_21_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_22_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_22_IRQHandler + B cpuss_interrupts_dw1_22_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_23_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_23_IRQHandler + B cpuss_interrupts_dw1_23_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_24_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_24_IRQHandler + B cpuss_interrupts_dw1_24_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_25_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_25_IRQHandler + B cpuss_interrupts_dw1_25_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_26_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_26_IRQHandler + B cpuss_interrupts_dw1_26_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_27_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_27_IRQHandler + B cpuss_interrupts_dw1_27_IRQHandler + + PUBWEAK cpuss_interrupts_dw1_28_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_dw1_28_IRQHandler + B cpuss_interrupts_dw1_28_IRQHandler + + PUBWEAK cpuss_interrupts_fault_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_fault_0_IRQHandler + B cpuss_interrupts_fault_0_IRQHandler + + PUBWEAK cpuss_interrupts_fault_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_fault_1_IRQHandler + B cpuss_interrupts_fault_1_IRQHandler + + PUBWEAK cpuss_interrupt_crypto_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupt_crypto_IRQHandler + B cpuss_interrupt_crypto_IRQHandler + + PUBWEAK cpuss_interrupt_fm_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupt_fm_IRQHandler + B cpuss_interrupt_fm_IRQHandler + + PUBWEAK cpuss_interrupts_cm4_fp_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_cm4_fp_IRQHandler + B cpuss_interrupts_cm4_fp_IRQHandler + + PUBWEAK cpuss_interrupts_cm0_cti_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_cm0_cti_0_IRQHandler + B cpuss_interrupts_cm0_cti_0_IRQHandler + + PUBWEAK cpuss_interrupts_cm0_cti_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_cm0_cti_1_IRQHandler + B cpuss_interrupts_cm0_cti_1_IRQHandler + + PUBWEAK cpuss_interrupts_cm4_cti_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_cm4_cti_0_IRQHandler + B cpuss_interrupts_cm4_cti_0_IRQHandler + + PUBWEAK cpuss_interrupts_cm4_cti_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +cpuss_interrupts_cm4_cti_1_IRQHandler + B cpuss_interrupts_cm4_cti_1_IRQHandler + + PUBWEAK tcpwm_0_interrupts_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_0_IRQHandler + B tcpwm_0_interrupts_0_IRQHandler + + PUBWEAK tcpwm_0_interrupts_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_1_IRQHandler + B tcpwm_0_interrupts_1_IRQHandler + + PUBWEAK tcpwm_0_interrupts_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_2_IRQHandler + B tcpwm_0_interrupts_2_IRQHandler + + PUBWEAK tcpwm_0_interrupts_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_3_IRQHandler + B tcpwm_0_interrupts_3_IRQHandler + + PUBWEAK tcpwm_0_interrupts_4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_4_IRQHandler + B tcpwm_0_interrupts_4_IRQHandler + + PUBWEAK tcpwm_0_interrupts_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_5_IRQHandler + B tcpwm_0_interrupts_5_IRQHandler + + PUBWEAK tcpwm_0_interrupts_6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_6_IRQHandler + B tcpwm_0_interrupts_6_IRQHandler + + PUBWEAK tcpwm_0_interrupts_7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_0_interrupts_7_IRQHandler + B tcpwm_0_interrupts_7_IRQHandler + + PUBWEAK tcpwm_1_interrupts_0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_0_IRQHandler + B tcpwm_1_interrupts_0_IRQHandler + + PUBWEAK tcpwm_1_interrupts_1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_1_IRQHandler + B tcpwm_1_interrupts_1_IRQHandler + + PUBWEAK tcpwm_1_interrupts_2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_2_IRQHandler + B tcpwm_1_interrupts_2_IRQHandler + + PUBWEAK tcpwm_1_interrupts_3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_3_IRQHandler + B tcpwm_1_interrupts_3_IRQHandler + + PUBWEAK tcpwm_1_interrupts_4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_4_IRQHandler + B tcpwm_1_interrupts_4_IRQHandler + + PUBWEAK tcpwm_1_interrupts_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_5_IRQHandler + B tcpwm_1_interrupts_5_IRQHandler + + PUBWEAK tcpwm_1_interrupts_6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_6_IRQHandler + B tcpwm_1_interrupts_6_IRQHandler + + PUBWEAK tcpwm_1_interrupts_7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_7_IRQHandler + B tcpwm_1_interrupts_7_IRQHandler + + PUBWEAK tcpwm_1_interrupts_8_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_8_IRQHandler + B tcpwm_1_interrupts_8_IRQHandler + + PUBWEAK tcpwm_1_interrupts_9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_9_IRQHandler + B tcpwm_1_interrupts_9_IRQHandler + + PUBWEAK tcpwm_1_interrupts_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_10_IRQHandler + B tcpwm_1_interrupts_10_IRQHandler + + PUBWEAK tcpwm_1_interrupts_11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_11_IRQHandler + B tcpwm_1_interrupts_11_IRQHandler + + PUBWEAK tcpwm_1_interrupts_12_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_12_IRQHandler + B tcpwm_1_interrupts_12_IRQHandler + + PUBWEAK tcpwm_1_interrupts_13_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_13_IRQHandler + B tcpwm_1_interrupts_13_IRQHandler + + PUBWEAK tcpwm_1_interrupts_14_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_14_IRQHandler + B tcpwm_1_interrupts_14_IRQHandler + + PUBWEAK tcpwm_1_interrupts_15_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_15_IRQHandler + B tcpwm_1_interrupts_15_IRQHandler + + PUBWEAK tcpwm_1_interrupts_16_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_16_IRQHandler + B tcpwm_1_interrupts_16_IRQHandler + + PUBWEAK tcpwm_1_interrupts_17_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_17_IRQHandler + B tcpwm_1_interrupts_17_IRQHandler + + PUBWEAK tcpwm_1_interrupts_18_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_18_IRQHandler + B tcpwm_1_interrupts_18_IRQHandler + + PUBWEAK tcpwm_1_interrupts_19_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_19_IRQHandler + B tcpwm_1_interrupts_19_IRQHandler + + PUBWEAK tcpwm_1_interrupts_20_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_20_IRQHandler + B tcpwm_1_interrupts_20_IRQHandler + + PUBWEAK tcpwm_1_interrupts_21_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_21_IRQHandler + B tcpwm_1_interrupts_21_IRQHandler + + PUBWEAK tcpwm_1_interrupts_22_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_22_IRQHandler + B tcpwm_1_interrupts_22_IRQHandler + + PUBWEAK tcpwm_1_interrupts_23_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +tcpwm_1_interrupts_23_IRQHandler + B tcpwm_1_interrupts_23_IRQHandler + + PUBWEAK pass_interrupt_sar_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +pass_interrupt_sar_IRQHandler + B pass_interrupt_sar_IRQHandler + + PUBWEAK audioss_0_interrupt_i2s_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +audioss_0_interrupt_i2s_IRQHandler + B audioss_0_interrupt_i2s_IRQHandler + + PUBWEAK audioss_0_interrupt_pdm_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +audioss_0_interrupt_pdm_IRQHandler + B audioss_0_interrupt_pdm_IRQHandler + + PUBWEAK audioss_1_interrupt_i2s_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +audioss_1_interrupt_i2s_IRQHandler + B audioss_1_interrupt_i2s_IRQHandler + + PUBWEAK profile_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +profile_interrupt_IRQHandler + B profile_interrupt_IRQHandler + + PUBWEAK smif_interrupt_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +smif_interrupt_IRQHandler + B smif_interrupt_IRQHandler + + PUBWEAK usb_interrupt_hi_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +usb_interrupt_hi_IRQHandler + B usb_interrupt_hi_IRQHandler + + PUBWEAK usb_interrupt_med_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +usb_interrupt_med_IRQHandler + B usb_interrupt_med_IRQHandler + + PUBWEAK usb_interrupt_lo_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +usb_interrupt_lo_IRQHandler + B usb_interrupt_lo_IRQHandler + + PUBWEAK sdhc_0_interrupt_wakeup_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +sdhc_0_interrupt_wakeup_IRQHandler + B sdhc_0_interrupt_wakeup_IRQHandler + + PUBWEAK sdhc_0_interrupt_general_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +sdhc_0_interrupt_general_IRQHandler + B sdhc_0_interrupt_general_IRQHandler + + PUBWEAK sdhc_1_interrupt_wakeup_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +sdhc_1_interrupt_wakeup_IRQHandler + B sdhc_1_interrupt_wakeup_IRQHandler + + PUBWEAK sdhc_1_interrupt_general_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +sdhc_1_interrupt_general_IRQHandler + B sdhc_1_interrupt_general_IRQHandler + + + END + + +; [] END OF FILE diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/system_psoc6.h b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/system_psoc6.h new file mode 100644 index 0000000000..423361f58a --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/system_psoc6.h @@ -0,0 +1,680 @@ +/***************************************************************************//** +* \file system_psoc6.h +* \version 2.60 +* +* \brief Device system header file. +* +******************************************************************************** +* \copyright +* Copyright 2016-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + + +#ifndef _SYSTEM_PSOC6_H_ +#define _SYSTEM_PSOC6_H_ + +/** +* \addtogroup group_system_config +* \{ +* Provides device startup, system configuration, and linker script files. +* The system startup provides the followings features: +* - See \ref group_system_config_device_initialization for the: +* * \ref group_system_config_dual_core_device_initialization +* * \ref group_system_config_single_core_device_initialization +* - \ref group_system_config_device_memory_definition +* - \ref group_system_config_heap_stack_config +* - \ref group_system_config_merge_apps +* - \ref group_system_config_default_handlers +* - \ref group_system_config_device_vector_table +* - \ref group_system_config_cm4_functions +* +* \section group_system_config_configuration Configuration Considerations +* +* \subsection group_system_config_device_memory_definition Device Memory Definition +* The flash and RAM allocation for each CPU is defined by the linker scripts. +* For dual-core devices, the physical flash and RAM memory is shared between the CPU cores. +* 2 KB of RAM (allocated at the end of RAM) are reserved for system use. +* For Single-Core devices the system reserves additional 80 bytes of RAM. +* Using the reserved memory area for other purposes will lead to unexpected behavior. +* +* \note The linker files provided with the PDL are generic and handle all common +* use cases. Your project may not use every section defined in the linker files. +* In that case you may see warnings during the build process. To eliminate build +* warnings in your project, you can simply comment out or remove the relevant +* code in the linker file. +* +* ARM GCC\n +* The flash and RAM sections for the CPU are defined in the linker files: +* 'xx_yy.ld', where 'xx' is the device group, and 'yy' is the target CPU; for example, +* 'cy8c6xx7_cm0plus.ld' and 'cy8c6xx7_cm4_dual.ld'. +* \note If the start of the Cortex-M4 application image is changed, the value +* of the of the \ref CY_CORTEX_M4_APPL_ADDR should also be changed. The +* \ref CY_CORTEX_M4_APPL_ADDR macro should be used as the parameter for the +* Cy_SysEnableCM4() function call. +* +* Change the flash and RAM sizes by editing the macros value in the +* linker files for both CPUs: +* - 'xx_cm0plus.ld', where 'xx' is the device group: +* \code +* flash (rx) : ORIGIN = 0x10000000, LENGTH = 0x00080000 +* ram (rwx) : ORIGIN = 0x08000000, LENGTH = 0x00024000 +* \endcode +* - 'xx_cm4_dual.ld', where 'xx' is the device group: +* \code +* flash (rx) : ORIGIN = 0x10080000, LENGTH = 0x00080000 +* ram (rwx) : ORIGIN = 0x08024000, LENGTH = 0x00023800 +* \endcode +* +* Change the value of the \ref CY_CORTEX_M4_APPL_ADDR macro to the rom ORIGIN's +* value in the 'xx_cm4_dual.ld' file, where 'xx' is the device group. Do this +* by either: +* - Passing the following commands to the compiler:\n +* \code -D CY_CORTEX_M4_APPL_ADDR=0x10080000 \endcode +* - Editing the \ref CY_CORTEX_M4_APPL_ADDR value in the 'system_xx.h', where 'xx' is device family:\n +* \code #define CY_CORTEX_M4_APPL_ADDR (0x10080000u) \endcode +* +* ARM MDK\n +* The flash and RAM sections for the CPU are defined in the linker files: +* 'xx_yy.scat', where 'xx' is the device group, and 'yy' is the target CPU; for example, +* 'cy8c6xx7_cm0plus.scat' and 'cy8c6xx7_cm4_dual.scat'. +* \note If the start of the Cortex-M4 application image is changed, the value +* of the of the \ref CY_CORTEX_M4_APPL_ADDR should also be changed. The +* \ref CY_CORTEX_M4_APPL_ADDR macro should be used as the parameter for the \ref +* Cy_SysEnableCM4() function call. +* +* \note The linker files provided with the PDL are generic and handle all common +* use cases. Your project may not use every section defined in the linker files. +* In that case you may see the warnings during the build process: +* L6314W (no section matches pattern) and/or L6329W +* (pattern only matches removed unused sections). In your project, you can +* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to +* the linker. You can also comment out or remove the relevant code in the linker +* file. +* +* Change the flash and RAM sizes by editing the macros value in the +* linker files for both CPUs: +* - 'xx_cm0plus.scat', where 'xx' is the device group: +* \code +* #define FLASH_START 0x10000000 +* #define FLASH_SIZE 0x00080000 +* #define RAM_START 0x08000000 +* #define RAM_SIZE 0x00024000 +* \endcode +* - 'xx_cm4_dual.scat', where 'xx' is the device group: +* \code +* #define FLASH_START 0x10080000 +* #define FLASH_SIZE 0x00080000 +* #define RAM_START 0x08024000 +* #define RAM_SIZE 0x00023800 +* \endcode +* +* Change the value of the \ref CY_CORTEX_M4_APPL_ADDR macro to the FLASH_START +* value in the 'xx_cm4_dual.scat' file, +* where 'xx' is the device group. Do this by either: +* - Passing the following commands to the compiler:\n +* \code -D CY_CORTEX_M4_APPL_ADDR=0x10080000 \endcode +* - Editing the \ref CY_CORTEX_M4_APPL_ADDR value in the 'system_xx.h', where +* 'xx' is device family:\n +* \code #define CY_CORTEX_M4_APPL_ADDR (0x10080000u) \endcode +* +* IAR\n +* The flash and RAM sections for the CPU are defined in the linker files: +* 'xx_yy.icf', where 'xx' is the device group, and 'yy' is the target CPU; for example, +* 'cy8c6xx7_cm0plus.icf' and 'cy8c6xx7_cm4_dual.icf'. +* \note If the start of the Cortex-M4 application image is changed, the value +* of the of the \ref CY_CORTEX_M4_APPL_ADDR should also be changed. The +* \ref CY_CORTEX_M4_APPL_ADDR macro should be used as the parameter for the \ref +* Cy_SysEnableCM4() function call. +* +* Change the flash and RAM sizes by editing the macros value in the +* linker files for both CPUs: +* - 'xx_cm0plus.icf', where 'xx' is the device group: +* \code +* define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000; +* define symbol __ICFEDIT_region_IROM1_end__ = 0x10080000; +* define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000; +* define symbol __ICFEDIT_region_IRAM1_end__ = 0x08024000; +* \endcode +* - 'xx_cm4_dual.icf', where 'xx' is the device group: +* \code +* define symbol __ICFEDIT_region_IROM1_start__ = 0x10080000; +* define symbol __ICFEDIT_region_IROM1_end__ = 0x10100000; +* define symbol __ICFEDIT_region_IRAM1_start__ = 0x08024000; +* define symbol __ICFEDIT_region_IRAM1_end__ = 0x08047800; +* \endcode +* +* Change the value of the \ref CY_CORTEX_M4_APPL_ADDR macro to the +* __ICFEDIT_region_IROM1_start__ value in the 'xx_cm4_dual.icf' file, where 'xx' +* is the device group. Do this by either: +* - Passing the following commands to the compiler:\n +* \code -D CY_CORTEX_M4_APPL_ADDR=0x10080000 \endcode +* - Editing the \ref CY_CORTEX_M4_APPL_ADDR value in the 'system_xx.h', where +* 'xx' is device family:\n +* \code #define CY_CORTEX_M4_APPL_ADDR (0x10080000u) \endcode +* +* \subsection group_system_config_device_initialization Device Initialization +* After a power-on-reset (POR), the boot process is handled by the boot code +* from the on-chip ROM that is always executed by the Cortex-M0+ core. The boot +* code passes the control to the Cortex-M0+ startup code located in flash. +* +* \subsubsection group_system_config_dual_core_device_initialization Dual-Core Devices +* The Cortex-M0+ startup code performs the device initialization by a call to +* SystemInit() and then calls the main() function. The Cortex-M4 core is disabled +* by default. Enable the core using the \ref Cy_SysEnableCM4() function. +* See \ref group_system_config_cm4_functions for more details. +* \note Startup code executes SystemInit() function for the both Cortex-M0+ and Cortex-M4 cores. +* The function has a separate implementation on each core. +* Both function implementations unlock and disable the WDT. +* Therefore enable the WDT after both cores have been initialized. +* +* \subsubsection group_system_config_single_core_device_initialization Single-Core Devices +* The Cortex-M0+ core is not user-accessible on these devices. In this case the +* Flash Boot handles setup of the CM0+ core and starts the Cortex-M4 core. +* +* \subsection group_system_config_heap_stack_config Heap and Stack Configuration +* There are two ways to adjust heap and stack configurations: +* -# Editing source code files +* -# Specifying via command line +* +* By default, the stack size is set to 0x00001000 and the heap size is set to 0x00000400. +* +* \subsubsection group_system_config_heap_stack_config_gcc ARM GCC +* - Editing source code files\n +* The heap and stack sizes are defined in the assembler startup files +* (e.g. startup_psoc6_01_cm0plus.S and startup_psoc6_01_cm4.S). +* Change the heap and stack sizes by modifying the following lines:\n +* \code .equ Stack_Size, 0x00001000 \endcode +* \code .equ Heap_Size, 0x00000400 \endcode +* +* - Specifying via command line\n +* Change the heap and stack sizes passing the following commands to the compiler:\n +* \code -D __STACK_SIZE=0x000000400 \endcode +* \code -D __HEAP_SIZE=0x000000100 \endcode +* +* \subsubsection group_system_config_heap_stack_config_mdk ARM MDK +* - Editing source code files\n +* The heap and stack sizes are defined in the assembler startup files +* (e.g. startup_psoc6_01_cm0plus.s and startup_psoc6_01_cm4.s). +* Change the heap and stack sizes by modifying the following lines:\n +* \code Stack_Size EQU 0x00001000 \endcode +* \code Heap_Size EQU 0x00000400 \endcode +* +* - Specifying via command line\n +* Change the heap and stack sizes passing the following commands to the assembler:\n +* \code "--predefine=___STACK_SIZE SETA 0x000000400" \endcode +* \code "--predefine=__HEAP_SIZE SETA 0x000000100" \endcode +* +* \subsubsection group_system_config_heap_stack_config_iar IAR +* - Editing source code files\n +* The heap and stack sizes are defined in the linker scatter files: 'xx_yy.icf', +* where 'xx' is the device family, and 'yy' is the target CPU; for example, +* cy8c6xx7_cm0plus.icf and cy8c6xx7_cm4_dual.icf. +* Change the heap and stack sizes by modifying the following lines:\n +* \code Stack_Size EQU 0x00001000 \endcode +* \code Heap_Size EQU 0x00000400 \endcode +* +* - Specifying via command line\n +* Change the heap and stack sizes passing the following commands to the +* linker (including quotation marks):\n +* \code --define_symbol __STACK_SIZE=0x000000400 \endcode +* \code --define_symbol __HEAP_SIZE=0x000000100 \endcode +* +* \subsection group_system_config_merge_apps Merging CM0+ and CM4 Executables +* The CM0+ project and linker script build the CM0+ application image. Similarly, +* the CM4 linker script builds the CM4 application image. Each specifies +* locations, sizes, and contents of sections in memory. See +* \ref group_system_config_device_memory_definition for the symbols and default +* values. +* +* The cymcuelftool is invoked by a post-build command. The precise project +* setting is IDE-specific. +* +* The cymcuelftool combines the two executables. The tool examines the +* executables to ensure that memory regions either do not overlap, or contain +* identical bytes (shared). If there are no problems, it creates a new ELF file +* with the merged image, without changing any of the addresses or data. +* +* \subsection group_system_config_default_handlers Default Interrupt Handlers Definition +* The default interrupt handler functions are defined as weak functions to a dummy +* handler in the startup file. The naming convention for the interrupt handler names +* is \_IRQHandler. A default interrupt handler can be overwritten in +* user code by defining the handler function using the same name. For example: +* \code +* void scb_0_interrupt_IRQHandler(void) +*{ +* ... +*} +* \endcode +* +* \subsection group_system_config_device_vector_table Vectors Table Copy from Flash to RAM +* This process uses memory sections defined in the linker script. The startup +* code actually defines the contents of the vector table and performs the copy. +* \subsubsection group_system_config_device_vector_table_gcc ARM GCC +* The linker script file is 'xx_yy.ld', where 'xx' is the device family, and +* 'yy' is the target CPU; for example, cy8c6xx7_cm0plus.ld and cy8c6xx7_cm4_dual.ld. +* It defines sections and locations in memory.\n +* Copy interrupt vectors from flash to RAM: \n +* From: \code LONG (__Vectors) \endcode +* To: \code LONG (__ram_vectors_start__) \endcode +* Size: \code LONG (__Vectors_End - __Vectors) \endcode +* The vector table address (and the vector table itself) are defined in the +* assembler startup files (e.g. startup_psoc6_01_cm0plus.S and startup_psoc6_01_cm4.S). +* The code in these files copies the vector table from Flash to RAM. +* \subsubsection group_system_config_device_vector_table_mdk ARM MDK +* The linker script file is 'xx_yy.scat', where 'xx' is the device family, +* and 'yy' is the target CPU; for example, cy8c6xx7_cm0plus.scat and +* cy8c6xx7_cm4_dual.scat. The linker script specifies that the vector table +* (RESET_RAM) shall be first in the RAM section.\n +* RESET_RAM represents the vector table. It is defined in the assembler startup +* files (e.g. startup_psoc6_01_cm0plus.s and startup_psoc6_01_cm4.s). +* The code in these files copies the vector table from Flash to RAM. +* +* \subsubsection group_system_config_device_vector_table_iar IAR +* The linker script file is 'xx_yy.icf', where 'xx' is the device family, and +* 'yy' is the target CPU; for example, cy8c6xx7_cm0plus.icf and cy8c6xx7_cm4_dual.icf. +* This file defines the .intvec_ram section and its location. +* \code place at start of IRAM1_region { readwrite section .intvec_ram}; \endcode +* The vector table address (and the vector table itself) are defined in the +* assembler startup files (e.g. startup_psoc6_01_cm0plus.s and startup_psoc6_01_cm4.s). +* The code in these files copies the vector table from Flash to RAM. +* +* \section group_system_config_more_information More Information +* Refer to the PDL User Guide for the +* more details. +* +* \section group_system_config_MISRA MISRA Compliance +* +* +* +* +* +* +* +* +* +* +* +* +* +* +*
MISRA RuleRule Class (Required/Advisory)Rule DescriptionDescription of Deviation(s)
2.3RThe character sequence // shall not be used within a comment.The comments provide a useful WEB link to the documentation.
+* +* \section group_system_config_changelog Changelog +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +* +*
VersionChangesReason for Change
2.60Updated linker scripts.Provided support for new devices, updated usage of CM0p prebuilt image.
2.50Updated assembler files, C files, linker scripts.Dynamic allocated HEAP size for Arm Compiler 6, IAR 8.
2.40Updated assembler files, C files, linker scripts.Added Arm Compiler 6 support.
2.30Added assembler files, linker scripts for Mbed OS.Added Arm Mbed OS embedded operating system support.
Updated linker scripts to extend the Flash and Ram memories size available for the CM4 core.Enhanced PDL usability.
2.20Moved the Cy_IPC_SystemSemaInit(), Cy_IPC_SystemPipeInit() functions implementation from IPC to Startup.Changed the IPC driver configuration method from compile time to run time.
2.10Added constructor attribute to SystemInit() function declaration for ARM MDK compiler. \n +* Removed $Sub$$main symbol for ARM MDK compiler. +* uVision Debugger support.
Updated description of the Startup behavior for Single-Core Devices. \n +* Added note about WDT disabling by SystemInit() function. +* Documentation improvement.
2.0Added restoring of FLL registers to the default state in SystemInit() API for single core devices. +* Single core device support. +*
Added Normal Access Restrictions, Public Key, TOC part2 and TOC part2 copy to Supervisory flash linker memory regions. \n +* Renamed 'wflash' memory region to 'em_eeprom'. +* Linker scripts usability improvement.
Added Cy_IPC_SystemSemaInit(), Cy_IPC_SystemPipeInit(), Cy_Flash_Init() functions call to SystemInit() API.Reserved system resources for internal operations.
Added clearing and releasing of IPC structure #7 (reserved for the Deep-Sleep operations) to SystemInit() API.To avoid deadlocks in case of SW or WDT reset during Deep-Sleep entering.
1.0Initial version
+* +* +* \defgroup group_system_config_macro Macro +* \{ +* \defgroup group_system_config_system_macro System +* \defgroup group_system_config_cm4_status_macro Cortex-M4 Status +* \defgroup group_system_config_user_settings_macro User Settings +* \} +* \defgroup group_system_config_functions Functions +* \{ +* \defgroup group_system_config_system_functions System +* \defgroup group_system_config_cm4_functions Cortex-M4 Control +* \} +* \defgroup group_system_config_globals Global Variables +* +* \} +*/ + +/** +* \addtogroup group_system_config_system_functions +* \{ +* \details +* The following system functions implement CMSIS Core functions. +* Refer to the [CMSIS documentation] +* (http://www.keil.com/pack/doc/CMSIS/Core/html/group__system__init__gr.html "System and Clock Configuration") +* for more details. +* \} +*/ + +#ifdef __cplusplus +extern "C" { +#endif + + +/******************************************************************************* +* Include files +*******************************************************************************/ +#include + + +/******************************************************************************* +* Global preprocessor symbols/macros ('define') +*******************************************************************************/ +#if ((defined(__GNUC__) && (__ARM_ARCH == 6) && (__ARM_ARCH_6M__ == 1)) || \ + (defined (__ICCARM__) && (__CORE__ == __ARM6M__)) || \ + (defined(__ARMCC_VERSION) && (__TARGET_ARCH_THUMB == 3))) + #define CY_SYSTEM_CPU_CM0P 1UL +#else + #define CY_SYSTEM_CPU_CM0P 0UL +#endif + +#if defined (CY_PSOC_CREATOR_USED) && (CY_PSOC_CREATOR_USED == 1U) + #include "cyfitter.h" +#endif /* (CY_PSOC_CREATOR_USED) && (CY_PSOC_CREATOR_USED == 1U) */ + + + + +/******************************************************************************* +* +* START OF USER SETTINGS HERE +* =========================== +* +* All lines with '<<<' can be set by user. +* +*******************************************************************************/ + +/** +* \addtogroup group_system_config_user_settings_macro +* \{ +*/ + +#if defined (CYDEV_CLK_EXTCLK__HZ) + #define CY_CLK_EXT_FREQ_HZ (CYDEV_CLK_EXTCLK__HZ) +#else + /***************************************************************************//** + * External Clock Frequency (in Hz, [value]UL). If compiled within + * PSoC Creator and the clock is enabled in the DWR, the value from DWR used. + * Otherwise, edit the value below. + * (USER SETTING) + *******************************************************************************/ + #define CY_CLK_EXT_FREQ_HZ (24000000UL) /* <<< 24 MHz */ +#endif /* (CYDEV_CLK_EXTCLK__HZ) */ + + +#if defined (CYDEV_CLK_ECO__HZ) + #define CY_CLK_ECO_FREQ_HZ (CYDEV_CLK_ECO__HZ) +#else + /***************************************************************************//** + * \brief External crystal oscillator frequency (in Hz, [value]UL). If compiled + * within PSoC Creator and the clock is enabled in the DWR, the value from DWR + * used. + * (USER SETTING) + *******************************************************************************/ + #define CY_CLK_ECO_FREQ_HZ (24000000UL) /* <<< 24 MHz */ +#endif /* (CYDEV_CLK_ECO__HZ) */ + + +#if defined (CYDEV_CLK_ALTHF__HZ) + #define CY_CLK_ALTHF_FREQ_HZ (CYDEV_CLK_ALTHF__HZ) +#else + /***************************************************************************//** + * \brief Alternate high frequency (in Hz, [value]UL). If compiled within + * PSoC Creator and the clock is enabled in the DWR, the value from DWR used. + * Otherwise, edit the value below. + * (USER SETTING) + *******************************************************************************/ + #define CY_CLK_ALTHF_FREQ_HZ (32000000UL) /* <<< 32 MHz */ +#endif /* (CYDEV_CLK_ALTHF__HZ) */ + + +/***************************************************************************//** +* \brief Start address of the Cortex-M4 application ([address]UL) +* (USER SETTING) +*******************************************************************************/ +#if !defined (CY_CORTEX_M4_APPL_ADDR) + #define CY_CORTEX_M4_APPL_ADDR (CY_FLASH_BASE + 0x2000U) /* <<< 8 kB of flash is reserved for the Cortex-M0+ application */ +#endif /* (CY_CORTEX_M4_APPL_ADDR) */ + + +/***************************************************************************//** +* \brief IPC Semaphores allocation ([value]UL). +* (USER SETTING) +*******************************************************************************/ +#define CY_IPC_SEMA_COUNT (128UL) /* <<< This will allow 128 (4*32) semaphores */ + + +/***************************************************************************//** +* \brief IPC Pipe definitions ([value]UL). +* (USER SETTING) +*******************************************************************************/ +#define CY_IPC_MAX_ENDPOINTS (8UL) /* <<< 8 endpoints */ + + +/******************************************************************************* +* +* END OF USER SETTINGS HERE +* ========================= +* +*******************************************************************************/ + +/** \} group_system_config_user_settings_macro */ + + +/** +* \addtogroup group_system_config_system_macro +* \{ +*/ + +#if (CY_SYSTEM_CPU_CM0P == 1UL) || defined(CY_DOXYGEN) + /** The Cortex-M0+ startup driver identifier */ + #define CY_STARTUP_M0P_ID ((uint32_t)((uint32_t)((0x0EU) & 0x3FFFU) << 18U)) +#endif /* (CY_SYSTEM_CPU_CM0P == 1UL) */ + +#if (CY_SYSTEM_CPU_CM0P != 1UL) || defined(CY_DOXYGEN) + /** The Cortex-M4 startup driver identifier */ + #define CY_STARTUP_M4_ID ((uint32_t)((uint32_t)((0x0FU) & 0x3FFFU) << 18U)) +#endif /* (CY_SYSTEM_CPU_CM0P != 1UL) */ + +/** \} group_system_config_system_macro */ + + +/** +* \addtogroup group_system_config_system_functions +* \{ +*/ +extern void SystemInit(void); + +extern void SystemCoreClockUpdate(void); +/** \} group_system_config_system_functions */ + + +/** +* \addtogroup group_system_config_cm4_functions +* \{ +*/ +extern uint32_t Cy_SysGetCM4Status(void); +extern void Cy_SysEnableCM4(uint32_t vectorTableOffset); +extern void Cy_SysDisableCM4(void); +extern void Cy_SysRetainCM4(void); +extern void Cy_SysResetCM4(void); +/** \} group_system_config_cm4_functions */ + + +/** \cond */ +extern void Default_Handler (void); + +void Cy_SysIpcPipeIsrCm0(void); +void Cy_SysIpcPipeIsrCm4(void); + +extern void Cy_SystemInit(void); +extern void Cy_SystemInitFpuEnable(void); + +extern uint32_t cy_delayFreqHz; +extern uint32_t cy_delayFreqKhz; +extern uint8_t cy_delayFreqMhz; +extern uint32_t cy_delay32kMs; +/** \endcond */ + + +#if (CY_SYSTEM_CPU_CM0P == 1UL) || defined(CY_DOXYGEN) +/** +* \addtogroup group_system_config_cm4_status_macro +* \{ +*/ +#define CY_SYS_CM4_STATUS_ENABLED (3U) /**< The Cortex-M4 core is enabled: power on, clock on, no isolate, no reset and no retain. */ +#define CY_SYS_CM4_STATUS_DISABLED (0U) /**< The Cortex-M4 core is disabled: power off, clock off, isolate, reset and no retain. */ +#define CY_SYS_CM4_STATUS_RETAINED (2U) /**< The Cortex-M4 core is retained. power off, clock off, isolate, no reset and retain. */ +#define CY_SYS_CM4_STATUS_RESET (1U) /**< The Cortex-M4 core is in the Reset mode: clock off, no isolated, no retain and reset. */ +/** \} group_system_config_cm4_status_macro */ + +#endif /* (CY_SYSTEM_CPU_CM0P == 1UL) */ + + +/******************************************************************************* +* IPC Configuration +* ========================= +*******************************************************************************/ +/* IPC CY_PIPE default configuration */ +#define CY_SYS_CYPIPE_CLIENT_CNT (8UL) + +#define CY_SYS_INTR_CYPIPE_MUX_EP0 (1UL) /* IPC CYPRESS PIPE */ +#define CY_SYS_INTR_CYPIPE_PRIOR_EP0 (1UL) /* Notifier Priority */ +#define CY_SYS_INTR_CYPIPE_PRIOR_EP1 (1UL) /* Notifier Priority */ + +#define CY_SYS_CYPIPE_CHAN_MASK_EP0 (0x0001UL << CY_IPC_CHAN_CYPIPE_EP0) +#define CY_SYS_CYPIPE_CHAN_MASK_EP1 (0x0001UL << CY_IPC_CHAN_CYPIPE_EP1) + + +/******************************************************************************/ +/* + * The System pipe configuration defines the IPC channel number, interrupt + * number, and the pipe interrupt mask for the endpoint. + * + * The format of the endPoint configuration + * Bits[31:16] Interrupt Mask + * Bits[15:8 ] IPC interrupt + * Bits[ 7:0 ] IPC channel + */ + +/* System Pipe addresses */ +/* CyPipe defines */ + +#define CY_SYS_CYPIPE_INTR_MASK ( CY_SYS_CYPIPE_CHAN_MASK_EP0 | CY_SYS_CYPIPE_CHAN_MASK_EP1 ) + +#define CY_SYS_CYPIPE_CONFIG_EP0 ( (CY_SYS_CYPIPE_INTR_MASK << CY_IPC_PIPE_CFG_IMASK_Pos) \ + | (CY_IPC_INTR_CYPIPE_EP0 << CY_IPC_PIPE_CFG_INTR_Pos) \ + | CY_IPC_CHAN_CYPIPE_EP0) +#define CY_SYS_CYPIPE_CONFIG_EP1 ( (CY_SYS_CYPIPE_INTR_MASK << CY_IPC_PIPE_CFG_IMASK_Pos) \ + | (CY_IPC_INTR_CYPIPE_EP1 << CY_IPC_PIPE_CFG_INTR_Pos) \ + | CY_IPC_CHAN_CYPIPE_EP1) + +/******************************************************************************/ + + +/** \addtogroup group_system_config_globals +* \{ +*/ + +extern uint32_t SystemCoreClock; +extern uint32_t cy_BleEcoClockFreqHz; +extern uint32_t cy_Hfclk0FreqHz; +extern uint32_t cy_PeriClkFreqHz; + +/** \} group_system_config_globals */ + + + +/** \cond INTERNAL */ +/******************************************************************************* +* Backward compatibility macro. The following code is DEPRECATED and must +* not be used in new projects +*******************************************************************************/ + +/* BWC defines for functions related to enter/exit critical section */ +#define Cy_SaveIRQ Cy_SysLib_EnterCriticalSection +#define Cy_RestoreIRQ Cy_SysLib_ExitCriticalSection +#define CY_SYS_INTR_CYPIPE_EP0 (CY_IPC_INTR_CYPIPE_EP0) +#define CY_SYS_INTR_CYPIPE_EP1 (CY_IPC_INTR_CYPIPE_EP1) + +/** \endcond */ + +#ifdef __cplusplus +} +#endif + +#endif /* _SYSTEM_PSOC6_H_ */ + + +/* [] END OF FILE */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/system_psoc6_cm4.c b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/system_psoc6_cm4.c new file mode 100644 index 0000000000..0a18f50a4d --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/device/system_psoc6_cm4.c @@ -0,0 +1,552 @@ +/***************************************************************************//** +* \file system_psoc6_cm4.c +* \version 2.60 +* +* The device system-source file. +* +******************************************************************************** +* \copyright +* Copyright 2016-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ + +#include +#include "system_psoc6.h" +#include "cy_device.h" +#include "cy_device_headers.h" +#include "cy_syslib.h" +#include "cy_wdt.h" + +#if !defined(CY_IPC_DEFAULT_CFG_DISABLE) + #include "cy_ipc_sema.h" + #include "cy_ipc_pipe.h" + #include "cy_ipc_drv.h" + + #if defined(CY_DEVICE_PSOC6ABLE2) + #include "cy_flash.h" + #endif /* defined(CY_DEVICE_PSOC6ABLE2) */ +#endif /* !defined(CY_IPC_DEFAULT_CFG_DISABLE) */ + + +/******************************************************************************* +* SystemCoreClockUpdate() +*******************************************************************************/ + +/** Default HFClk frequency in Hz */ +#define CY_CLK_HFCLK0_FREQ_HZ_DEFAULT (8000000UL) + +/** Default PeriClk frequency in Hz */ +#define CY_CLK_PERICLK_FREQ_HZ_DEFAULT (4000000UL) + +/** Default SlowClk system core frequency in Hz */ +#define CY_CLK_SYSTEM_FREQ_HZ_DEFAULT (8000000UL) + +/** IMO frequency in Hz */ +#define CY_CLK_IMO_FREQ_HZ (8000000UL) + +/** HVILO frequency in Hz */ +#define CY_CLK_HVILO_FREQ_HZ (32000UL) + +/** PILO frequency in Hz */ +#define CY_CLK_PILO_FREQ_HZ (32768UL) + +/** WCO frequency in Hz */ +#define CY_CLK_WCO_FREQ_HZ (32768UL) + +/** ALTLF frequency in Hz */ +#define CY_CLK_ALTLF_FREQ_HZ (32768UL) + + +/** +* Holds the SlowClk (Cortex-M0+) or FastClk (Cortex-M4) system core clock, +* which is the system clock frequency supplied to the SysTick timer and the +* processor core clock. +* This variable implements CMSIS Core global variable. +* Refer to the [CMSIS documentation] +* (http://www.keil.com/pack/doc/CMSIS/Core/html/group__system__init__gr.html "System and Clock Configuration") +* for more details. +* This variable can be used by debuggers to query the frequency +* of the debug timer or to configure the trace clock speed. +* +* \attention Compilers must be configured to avoid removing this variable in case +* the application program is not using it. Debugging systems require the variable +* to be physically present in memory so that it can be examined to configure the debugger. */ +uint32_t SystemCoreClock = CY_CLK_SYSTEM_FREQ_HZ_DEFAULT; + +/** Holds the HFClk0 clock frequency. Updated by \ref SystemCoreClockUpdate(). */ +uint32_t cy_Hfclk0FreqHz = CY_CLK_HFCLK0_FREQ_HZ_DEFAULT; + +/** Holds the PeriClk clock frequency. Updated by \ref SystemCoreClockUpdate(). */ +uint32_t cy_PeriClkFreqHz = CY_CLK_PERICLK_FREQ_HZ_DEFAULT; + +/** Holds the Alternate high frequency clock in Hz. Updated by \ref SystemCoreClockUpdate(). */ +#if (defined (CY_IP_MXBLESS) && (CY_IP_MXBLESS == 1UL)) || defined (CY_DOXYGEN) + uint32_t cy_BleEcoClockFreqHz = CY_CLK_ALTHF_FREQ_HZ; +#endif /* (defined (CY_IP_MXBLESS) && (CY_IP_MXBLESS == 1UL)) || defined (CY_DOXYGEN) */ + +/* SCB->CPACR */ +#define SCB_CPACR_CP10_CP11_ENABLE (0xFUL << 20u) + + +/******************************************************************************* +* SystemInit() +*******************************************************************************/ + +/* CLK_FLL_CONFIG default values */ +#define CY_FB_CLK_FLL_CONFIG_VALUE (0x01000000u) +#define CY_FB_CLK_FLL_CONFIG2_VALUE (0x00020001u) +#define CY_FB_CLK_FLL_CONFIG3_VALUE (0x00002800u) +#define CY_FB_CLK_FLL_CONFIG4_VALUE (0x000000FFu) + + +/******************************************************************************* +* SystemCoreClockUpdate (void) +*******************************************************************************/ + +/* Do not use these definitions directly in your application */ +#define CY_DELAY_MS_OVERFLOW_THRESHOLD (0x8000u) +#define CY_DELAY_1K_THRESHOLD (1000u) +#define CY_DELAY_1K_MINUS_1_THRESHOLD (CY_DELAY_1K_THRESHOLD - 1u) +#define CY_DELAY_1M_THRESHOLD (1000000u) +#define CY_DELAY_1M_MINUS_1_THRESHOLD (CY_DELAY_1M_THRESHOLD - 1u) +uint32_t cy_delayFreqHz = CY_CLK_SYSTEM_FREQ_HZ_DEFAULT; + +uint32_t cy_delayFreqKhz = (CY_CLK_SYSTEM_FREQ_HZ_DEFAULT + CY_DELAY_1K_MINUS_1_THRESHOLD) / + CY_DELAY_1K_THRESHOLD; + +uint8_t cy_delayFreqMhz = (uint8_t)((CY_CLK_SYSTEM_FREQ_HZ_DEFAULT + CY_DELAY_1M_MINUS_1_THRESHOLD) / + CY_DELAY_1M_THRESHOLD); + +uint32_t cy_delay32kMs = CY_DELAY_MS_OVERFLOW_THRESHOLD * + ((CY_CLK_SYSTEM_FREQ_HZ_DEFAULT + CY_DELAY_1K_MINUS_1_THRESHOLD) / CY_DELAY_1K_THRESHOLD); + +#define CY_ROOT_PATH_SRC_IMO (0UL) +#define CY_ROOT_PATH_SRC_EXT (1UL) +#if (SRSS_ECO_PRESENT == 1U) + #define CY_ROOT_PATH_SRC_ECO (2UL) +#endif /* (SRSS_ECO_PRESENT == 1U) */ +#if (SRSS_ALTHF_PRESENT == 1U) + #define CY_ROOT_PATH_SRC_ALTHF (3UL) +#endif /* (SRSS_ALTHF_PRESENT == 1U) */ +#define CY_ROOT_PATH_SRC_DSI_MUX (4UL) +#define CY_ROOT_PATH_SRC_DSI_MUX_HVILO (16UL) +#define CY_ROOT_PATH_SRC_DSI_MUX_WCO (17UL) +#if (SRSS_ALTLF_PRESENT == 1U) + #define CY_ROOT_PATH_SRC_DSI_MUX_ALTLF (18UL) +#endif /* (SRSS_ALTLF_PRESENT == 1U) */ +#if (SRSS_PILO_PRESENT == 1U) + #define CY_ROOT_PATH_SRC_DSI_MUX_PILO (19UL) +#endif /* (SRSS_PILO_PRESENT == 1U) */ + + +/******************************************************************************* +* Function Name: SystemInit +****************************************************************************//** +* \cond +* Initializes the system: +* - Restores FLL registers to the default state for single core devices. +* - Unlocks and disables WDT. +* - Calls Cy_PDL_Init() function to define the driver library. +* - Calls the Cy_SystemInit() function, if compiled from PSoC Creator. +* - Calls \ref SystemCoreClockUpdate(). +* \endcond +*******************************************************************************/ +void SystemInit(void) +{ + Cy_PDL_Init(CY_DEVICE_CFG); + +#ifdef __CM0P_PRESENT + #if (__CM0P_PRESENT == 0) + /* Restore FLL registers to the default state as they are not restored by the ROM code */ + uint32_t copy = SRSS->CLK_FLL_CONFIG; + copy &= ~SRSS_CLK_FLL_CONFIG_FLL_ENABLE_Msk; + SRSS->CLK_FLL_CONFIG = copy; + + copy = SRSS->CLK_ROOT_SELECT[0u]; + copy &= ~SRSS_CLK_ROOT_SELECT_ROOT_DIV_Msk; /* Set ROOT_DIV = 0*/ + SRSS->CLK_ROOT_SELECT[0u] = copy; + + SRSS->CLK_FLL_CONFIG = CY_FB_CLK_FLL_CONFIG_VALUE; + SRSS->CLK_FLL_CONFIG2 = CY_FB_CLK_FLL_CONFIG2_VALUE; + SRSS->CLK_FLL_CONFIG3 = CY_FB_CLK_FLL_CONFIG3_VALUE; + SRSS->CLK_FLL_CONFIG4 = CY_FB_CLK_FLL_CONFIG4_VALUE; + + /* Unlock and disable WDT */ + Cy_WDT_Unlock(); + Cy_WDT_Disable(); + #endif /* (__CM0P_PRESENT == 0) */ +#endif /* __CM0P_PRESENT */ + + Cy_SystemInit(); + SystemCoreClockUpdate(); + +#if !defined(CY_IPC_DEFAULT_CFG_DISABLE) + +#ifdef __CM0P_PRESENT + #if (__CM0P_PRESENT == 0) + /* Allocate and initialize semaphores for the system operations. */ + static uint32_t ipcSemaArray[CY_IPC_SEMA_COUNT / CY_IPC_SEMA_PER_WORD]; + (void) Cy_IPC_Sema_Init(CY_IPC_CHAN_SEMA, CY_IPC_SEMA_COUNT, ipcSemaArray); + #else + (void) Cy_IPC_Sema_Init(CY_IPC_CHAN_SEMA, 0ul, NULL); + #endif /* (__CM0P_PRESENT) */ +#else + (void) Cy_IPC_Sema_Init(CY_IPC_CHAN_SEMA, 0ul, NULL); +#endif /* __CM0P_PRESENT */ + + + /******************************************************************************** + * + * Initializes the system pipes. The system pipes are used by BLE and Flash. + * + * If the default startup file is not used, or SystemInit() is not called in your + * project, call the following three functions prior to executing any flash or + * EmEEPROM write or erase operation: + * -# Cy_IPC_Sema_Init() + * -# Cy_IPC_Pipe_Config() + * -# Cy_IPC_Pipe_Init() + * -# Cy_Flash_Init() + * + *******************************************************************************/ + /* Create an array of endpoint structures */ + static cy_stc_ipc_pipe_ep_t systemIpcPipeEpArray[CY_IPC_MAX_ENDPOINTS]; + + Cy_IPC_Pipe_Config(systemIpcPipeEpArray); + + static cy_ipc_pipe_callback_ptr_t systemIpcPipeSysCbArray[CY_SYS_CYPIPE_CLIENT_CNT]; + + static const cy_stc_ipc_pipe_config_t systemIpcPipeConfigCm4 = + { + /* .ep0ConfigData */ + { + /* .ipcNotifierNumber */ CY_IPC_INTR_CYPIPE_EP0, + /* .ipcNotifierPriority */ CY_SYS_INTR_CYPIPE_PRIOR_EP0, + /* .ipcNotifierMuxNumber */ CY_SYS_INTR_CYPIPE_MUX_EP0, + /* .epAddress */ CY_IPC_EP_CYPIPE_CM0_ADDR, + /* .epConfig */ CY_SYS_CYPIPE_CONFIG_EP0 + }, + /* .ep1ConfigData */ + { + /* .ipcNotifierNumber */ CY_IPC_INTR_CYPIPE_EP1, + /* .ipcNotifierPriority */ CY_SYS_INTR_CYPIPE_PRIOR_EP1, + /* .ipcNotifierMuxNumber */ 0u, + /* .epAddress */ CY_IPC_EP_CYPIPE_CM4_ADDR, + /* .epConfig */ CY_SYS_CYPIPE_CONFIG_EP1 + }, + /* .endpointClientsCount */ CY_SYS_CYPIPE_CLIENT_CNT, + /* .endpointsCallbacksArray */ systemIpcPipeSysCbArray, + /* .userPipeIsrHandler */ &Cy_SysIpcPipeIsrCm4 + }; + + if (cy_device->flashPipeRequired != 0u) + { + Cy_IPC_Pipe_Init(&systemIpcPipeConfigCm4); + } + +#if defined(CY_DEVICE_PSOC6ABLE2) + Cy_Flash_Init(); +#endif /* defined(CY_DEVICE_PSOC6ABLE2) */ + +#endif /* !defined(CY_IPC_DEFAULT_CFG_DISABLE) */ +} + + +/******************************************************************************* +* Function Name: Cy_SystemInit +****************************************************************************//** +* +* The function is called during device startup. Once project compiled as part of +* the PSoC Creator project, the Cy_SystemInit() function is generated by the +* PSoC Creator. +* +* The function generated by PSoC Creator performs all of the necessary device +* configuration based on the design settings. This includes settings from the +* Design Wide Resources (DWR) such as Clocks and Pins as well as any component +* configuration that is necessary. +* +*******************************************************************************/ +__WEAK void Cy_SystemInit(void) +{ + /* Empty weak function. The actual implementation to be in the PSoC Creator + * generated strong function. + */ +} + + +/******************************************************************************* +* Function Name: SystemCoreClockUpdate +****************************************************************************//** +* +* Gets core clock frequency and updates \ref SystemCoreClock, \ref +* cy_Hfclk0FreqHz, and \ref cy_PeriClkFreqHz. +* +* Updates global variables used by the \ref Cy_SysLib_Delay(), \ref +* Cy_SysLib_DelayUs(), and \ref Cy_SysLib_DelayCycles(). +* +*******************************************************************************/ +void SystemCoreClockUpdate (void) +{ + uint32_t srcFreqHz; + uint32_t pathFreqHz; + uint32_t fastClkDiv; + uint32_t periClkDiv; + uint32_t rootPath; + uint32_t srcClk; + + /* Get root path clock for the high-frequency clock # 0 */ + rootPath = _FLD2VAL(SRSS_CLK_ROOT_SELECT_ROOT_MUX, SRSS->CLK_ROOT_SELECT[0u]); + + /* Get source of the root path clock */ + srcClk = _FLD2VAL(SRSS_CLK_PATH_SELECT_PATH_MUX, SRSS->CLK_PATH_SELECT[rootPath]); + + /* Get frequency of the source */ + switch (srcClk) + { + case CY_ROOT_PATH_SRC_IMO: + srcFreqHz = CY_CLK_IMO_FREQ_HZ; + break; + + case CY_ROOT_PATH_SRC_EXT: + srcFreqHz = CY_CLK_EXT_FREQ_HZ; + break; + + #if (SRSS_ECO_PRESENT == 1U) + case CY_ROOT_PATH_SRC_ECO: + srcFreqHz = CY_CLK_ECO_FREQ_HZ; + break; + #endif /* (SRSS_ECO_PRESENT == 1U) */ + +#if defined (CY_IP_MXBLESS) && (CY_IP_MXBLESS == 1UL) && (SRSS_ALTHF_PRESENT == 1U) + case CY_ROOT_PATH_SRC_ALTHF: + srcFreqHz = cy_BleEcoClockFreqHz; + break; +#endif /* defined (CY_IP_MXBLESS) && (CY_IP_MXBLESS == 1UL) && (SRSS_ALTHF_PRESENT == 1U) */ + + case CY_ROOT_PATH_SRC_DSI_MUX: + { + uint32_t dsi_src; + dsi_src = _FLD2VAL(SRSS_CLK_DSI_SELECT_DSI_MUX, SRSS->CLK_DSI_SELECT[rootPath]); + switch (dsi_src) + { + case CY_ROOT_PATH_SRC_DSI_MUX_HVILO: + srcFreqHz = CY_CLK_HVILO_FREQ_HZ; + break; + + case CY_ROOT_PATH_SRC_DSI_MUX_WCO: + srcFreqHz = CY_CLK_WCO_FREQ_HZ; + break; + + #if (SRSS_ALTLF_PRESENT == 1U) + case CY_ROOT_PATH_SRC_DSI_MUX_ALTLF: + srcFreqHz = CY_CLK_ALTLF_FREQ_HZ; + break; + #endif /* (SRSS_ALTLF_PRESENT == 1U) */ + + #if (SRSS_PILO_PRESENT == 1U) + case CY_ROOT_PATH_SRC_DSI_MUX_PILO: + srcFreqHz = CY_CLK_PILO_FREQ_HZ; + break; + #endif /* (SRSS_PILO_PRESENT == 1U) */ + + default: + srcFreqHz = CY_CLK_HVILO_FREQ_HZ; + break; + } + } + break; + + default: + srcFreqHz = CY_CLK_EXT_FREQ_HZ; + break; + } + + if (rootPath == 0UL) + { + /* FLL */ + bool fllLocked = ( 0UL != _FLD2VAL(SRSS_CLK_FLL_STATUS_LOCKED, SRSS->CLK_FLL_STATUS)); + bool fllOutputOutput = ( 3UL == _FLD2VAL(SRSS_CLK_FLL_CONFIG3_BYPASS_SEL, SRSS->CLK_FLL_CONFIG3)); + bool fllOutputAuto = ((0UL == _FLD2VAL(SRSS_CLK_FLL_CONFIG3_BYPASS_SEL, SRSS->CLK_FLL_CONFIG3)) || + (1UL == _FLD2VAL(SRSS_CLK_FLL_CONFIG3_BYPASS_SEL, SRSS->CLK_FLL_CONFIG3))); + if ((fllOutputAuto && fllLocked) || fllOutputOutput) + { + uint32_t fllMult; + uint32_t refDiv; + uint32_t outputDiv; + + fllMult = _FLD2VAL(SRSS_CLK_FLL_CONFIG_FLL_MULT, SRSS->CLK_FLL_CONFIG); + refDiv = _FLD2VAL(SRSS_CLK_FLL_CONFIG2_FLL_REF_DIV, SRSS->CLK_FLL_CONFIG2); + outputDiv = _FLD2VAL(SRSS_CLK_FLL_CONFIG_FLL_OUTPUT_DIV, SRSS->CLK_FLL_CONFIG) + 1UL; + + pathFreqHz = ((srcFreqHz / refDiv) * fllMult) / outputDiv; + } + else + { + pathFreqHz = srcFreqHz; + } + } + else if ((rootPath == 1UL) || (rootPath == 2UL)) + { + /* PLL */ + bool pllLocked = ( 0UL != _FLD2VAL(SRSS_CLK_PLL_STATUS_LOCKED, SRSS->CLK_PLL_STATUS[rootPath - 1UL])); + bool pllOutputOutput = ( 3UL == _FLD2VAL(SRSS_CLK_PLL_CONFIG_BYPASS_SEL, SRSS->CLK_PLL_CONFIG[rootPath - 1UL])); + bool pllOutputAuto = ((0UL == _FLD2VAL(SRSS_CLK_PLL_CONFIG_BYPASS_SEL, SRSS->CLK_PLL_CONFIG[rootPath - 1UL])) || + (1UL == _FLD2VAL(SRSS_CLK_PLL_CONFIG_BYPASS_SEL, SRSS->CLK_PLL_CONFIG[rootPath - 1UL]))); + if ((pllOutputAuto && pllLocked) || pllOutputOutput) + { + uint32_t feedbackDiv; + uint32_t referenceDiv; + uint32_t outputDiv; + + feedbackDiv = _FLD2VAL(SRSS_CLK_PLL_CONFIG_FEEDBACK_DIV, SRSS->CLK_PLL_CONFIG[rootPath - 1UL]); + referenceDiv = _FLD2VAL(SRSS_CLK_PLL_CONFIG_REFERENCE_DIV, SRSS->CLK_PLL_CONFIG[rootPath - 1UL]); + outputDiv = _FLD2VAL(SRSS_CLK_PLL_CONFIG_OUTPUT_DIV, SRSS->CLK_PLL_CONFIG[rootPath - 1UL]); + + pathFreqHz = ((srcFreqHz * feedbackDiv) / referenceDiv) / outputDiv; + + } + else + { + pathFreqHz = srcFreqHz; + } + } + else + { + /* Direct */ + pathFreqHz = srcFreqHz; + } + + /* Get frequency after hf_clk pre-divider */ + pathFreqHz = pathFreqHz >> _FLD2VAL(SRSS_CLK_ROOT_SELECT_ROOT_DIV, SRSS->CLK_ROOT_SELECT[0u]); + cy_Hfclk0FreqHz = pathFreqHz; + + /* Fast Clock Divider */ + fastClkDiv = 1u + _FLD2VAL(CPUSS_CM4_CLOCK_CTL_FAST_INT_DIV, CPUSS->CM4_CLOCK_CTL); + + /* Peripheral Clock Divider */ + periClkDiv = 1u + _FLD2VAL(CPUSS_CM0_CLOCK_CTL_PERI_INT_DIV, CPUSS->CM0_CLOCK_CTL); + cy_PeriClkFreqHz = pathFreqHz / periClkDiv; + + pathFreqHz = pathFreqHz / fastClkDiv; + SystemCoreClock = pathFreqHz; + + /* Sets clock frequency for Delay API */ + cy_delayFreqHz = SystemCoreClock; + cy_delayFreqMhz = (uint8_t)((cy_delayFreqHz + CY_DELAY_1M_MINUS_1_THRESHOLD) / CY_DELAY_1M_THRESHOLD); + cy_delayFreqKhz = (cy_delayFreqHz + CY_DELAY_1K_MINUS_1_THRESHOLD) / CY_DELAY_1K_THRESHOLD; + cy_delay32kMs = CY_DELAY_MS_OVERFLOW_THRESHOLD * cy_delayFreqKhz; +} + + +/******************************************************************************* +* Function Name: Cy_SystemInitFpuEnable +****************************************************************************//** +* +* Enables the FPU if it is used. The function is called from the startup file. +* +*******************************************************************************/ +void Cy_SystemInitFpuEnable(void) +{ + #if defined (__FPU_USED) && (__FPU_USED == 1U) + uint32_t interruptState; + interruptState = Cy_SysLib_EnterCriticalSection(); + SCB->CPACR |= SCB_CPACR_CP10_CP11_ENABLE; + __DSB(); + __ISB(); + Cy_SysLib_ExitCriticalSection(interruptState); + #endif /* (__FPU_USED) && (__FPU_USED == 1U) */ +} + + +#if !defined(CY_IPC_DEFAULT_CFG_DISABLE) +/******************************************************************************* +* Function Name: Cy_SysIpcPipeIsrCm4 +****************************************************************************//** +* +* This is the interrupt service routine for the system pipe. +* +*******************************************************************************/ +void Cy_SysIpcPipeIsrCm4(void) +{ + Cy_IPC_Pipe_ExecuteCallback(CY_IPC_EP_CYPIPE_CM4_ADDR); +} +#endif + + +/******************************************************************************* +* Function Name: Cy_MemorySymbols +****************************************************************************//** +* +* The intention of the function is to declare boundaries of the memories for the +* MDK compilers. For the rest of the supported compilers, this is done using +* linker configuration files. The following symbols used by the cymcuelftool. +* +*******************************************************************************/ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION < 6010050) +__asm void Cy_MemorySymbols(void) +{ + /* Flash */ + EXPORT __cy_memory_0_start + EXPORT __cy_memory_0_length + EXPORT __cy_memory_0_row_size + + /* Working Flash */ + EXPORT __cy_memory_1_start + EXPORT __cy_memory_1_length + EXPORT __cy_memory_1_row_size + + /* Supervisory Flash */ + EXPORT __cy_memory_2_start + EXPORT __cy_memory_2_length + EXPORT __cy_memory_2_row_size + + /* XIP */ + EXPORT __cy_memory_3_start + EXPORT __cy_memory_3_length + EXPORT __cy_memory_3_row_size + + /* eFuse */ + EXPORT __cy_memory_4_start + EXPORT __cy_memory_4_length + EXPORT __cy_memory_4_row_size + + /* Flash */ +__cy_memory_0_start EQU __cpp(CY_FLASH_BASE) +__cy_memory_0_length EQU __cpp(CY_FLASH_SIZE) +__cy_memory_0_row_size EQU 0x200 + + /* Flash region for EEPROM emulation */ +__cy_memory_1_start EQU __cpp(CY_EM_EEPROM_BASE) +__cy_memory_1_length EQU __cpp(CY_EM_EEPROM_SIZE) +__cy_memory_1_row_size EQU 0x200 + + /* Supervisory Flash */ +__cy_memory_2_start EQU __cpp(CY_SFLASH_BASE) +__cy_memory_2_length EQU __cpp(CY_SFLASH_SIZE) +__cy_memory_2_row_size EQU 0x200 + + /* XIP */ +__cy_memory_3_start EQU __cpp(CY_XIP_BASE) +__cy_memory_3_length EQU __cpp(CY_XIP_SIZE) +__cy_memory_3_row_size EQU 0x200 + + /* eFuse */ +__cy_memory_4_start EQU __cpp(0x90700000) +__cy_memory_4_length EQU __cpp(0x100000) +__cy_memory_4_row_size EQU __cpp(1) +} +#endif /* defined (__ARMCC_VERSION) && (__ARMCC_VERSION < 6010050) */ + + +/* [] END OF FILE */ diff --git a/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/secure_image_parameters.json b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/secure_image_parameters.json new file mode 100644 index 0000000000..b66402fccc --- /dev/null +++ b/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_064S2_4343W/secure_image_parameters.json @@ -0,0 +1,17 @@ +{ + "boot0" : { + "VERSION" : "0.1", + "ROLLBACK_COUNTER" : "0" + }, + + "boot1" : { + "VERSION" : "0.1", + "ROLLBACK_COUNTER" : "0" + }, + + "sdk_path" : "targets/TARGET_Cypress/TARGET_PSOC6/sb-tools/", + "priv_key_file": "keys/USERAPP_CM4_KEY_PRIV.pem", + "aes_key_file": "keys/image-aes-128.key", + "dev_pub_key_file": "keys/dev_pub_key.pem", + "policy_file": "policy/policy_single_stage_CM4.json" +} diff --git a/targets/targets.json b/targets/targets.json index a4c30808fd..c49abd6e08 100644 --- a/targets/targets.json +++ b/targets/targets.json @@ -9101,6 +9101,32 @@ "network-default-interface-type": "WIFI" } }, + "CY8CKIT_064S2_4343W": { + "inherits": ["MCU_PSOC6_M4"], + "features": ["BLE"], + "components_remove": ["QSPIF"], + "supported_form_factors": ["ARDUINO"], + "device_has_remove": ["ANALOGOUT", "QSPI"], + "extra_labels_add": [ + "PSOC6_02", + "MXCRYPTO_02", + "CM0P_SLEEP", + "WHD", + "4343W", + "CYW43XXX", + "CORDIO" + ], + "macros_add": ["CYB0644ABZI_S2D44", "CYBSP_WIFI_CAPABLE"], + "detect_code": ["190A"], + "post_binary_hook": { + "function": "PSOC6Code.sign_image" + }, + "forced_reset_timeout": 5, + "overrides": { + "network-default-interface-type": "WIFI" + }, + "program_cycle_s": 10 + }, "CY8CKIT_062_WIFI_BT": { "inherits": ["MCU_PSOC6_M4"], "features": ["BLE"],