mirror of https://github.com/ARMmbed/mbed-os.git
[EFM32] Condense common header files
First wave of squashing header files in order to get to a more sensible folder tree. * Moved header files with 100% similarity to common folder * Created a CommonPinNames.h header containing the base pin names P[A-F][0-15] and NCpull/3122/head
Steven Cooreman
parent
9cd14e29a7
commit
b766c48744
|
|
@ -23,30 +23,14 @@
|
|||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "em_gpio.h"
|
||||
#include "Modules.h"
|
||||
#include "CommonPinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
typedef enum {
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15,
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15,
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15,
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15,
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15,
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15,
|
||||
EFM32_STANDARD_PIN_DEFINITIONS,
|
||||
|
||||
/* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
|
||||
LED0 = PE2,
|
||||
|
|
@ -66,53 +50,9 @@ typedef enum {
|
|||
SERIAL_RX = PD1,
|
||||
USBTX = PE0,
|
||||
USBRX = PE1,
|
||||
EFM_BC_EN = PF7,
|
||||
|
||||
/* Not connected */
|
||||
NC = (int) 0xFFFFFFFF
|
||||
EFM_BC_EN = PF7
|
||||
} PinName;
|
||||
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
// EFM32 pin modes
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
PushPullDrive = gpioModePushPullDrive,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
WiredAndDrive = gpioModeWiredAndDrive,
|
||||
WiredAndDriveFilter = gpioModeWiredAndDriveFilter,
|
||||
WiredAndDrivePullUp = gpioModeWiredAndDrivePullUp,
|
||||
WiredAndDrivePullUpFilter = gpioModeWiredAndDrivePullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -23,29 +23,14 @@
|
|||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "em_gpio.h"
|
||||
#include "CommonPinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
typedef enum {
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15,
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15,
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15,
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15,
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15,
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15,
|
||||
EFM32_STANDARD_PIN_DEFINITIONS,
|
||||
|
||||
/* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
|
||||
LED0 = PF4,
|
||||
|
|
@ -65,53 +50,9 @@ typedef enum {
|
|||
SERIAL_RX = PE11,
|
||||
USBTX = PF2,
|
||||
USBRX = PA0,
|
||||
EFM_BC_EN = PA9,
|
||||
|
||||
/* Not connected */
|
||||
NC = (int) 0xFFFFFFFF
|
||||
EFM_BC_EN = PA9
|
||||
} PinName;
|
||||
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
/* EFM32 pin modes */
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
PushPullDrive = gpioModePushPullDrive,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
WiredAndDrive = gpioModeWiredAndDrive,
|
||||
WiredAndDriveFilter = gpioModeWiredAndDriveFilter,
|
||||
WiredAndDrivePullUp = gpioModeWiredAndDrivePullUp,
|
||||
WiredAndDrivePullUpFilter = gpioModeWiredAndDrivePullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file PortNames.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_PORTNAMES_H
|
||||
#define MBED_PORTNAMES_H
|
||||
|
||||
#include "em_gpio.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PortA = gpioPortA, /**< Port A */
|
||||
PortB = gpioPortB, /**< Port B */
|
||||
PortC = gpioPortC, /**< Port C */
|
||||
PortD = gpioPortD, /**< Port D */
|
||||
PortE = gpioPortE, /**< Port E */
|
||||
PortF = gpioPortF /**< Port F */
|
||||
} PortName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file device.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_DEVICE_H
|
||||
#define MBED_DEVICE_H
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
// Redefine OPEN_MAX from sys_limits.h to save on RAM.
|
||||
// Effect: maximum amount of file handlers = OPEN_MAX
|
||||
// This is not going to have an impact, since this is a RAM-limited part anyway.
|
||||
#define OPEN_MAX 24
|
||||
|
||||
#include "objects.h"
|
||||
#include "Modules.h"
|
||||
#include "device_peripherals.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -23,29 +23,14 @@
|
|||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "em_gpio.h"
|
||||
#include "CommonPinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
typedef enum {
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15,
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15,
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15,
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15,
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15,
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15,
|
||||
EFM32_STANDARD_PIN_DEFINITIONS,
|
||||
|
||||
/* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
|
||||
LED0 = PE2,
|
||||
|
|
@ -65,53 +50,9 @@ typedef enum {
|
|||
SERIAL_RX = PD1,
|
||||
USBTX = PE0,
|
||||
USBRX = PE1,
|
||||
EFM_BC_EN = PF7,
|
||||
|
||||
/* Not connected */
|
||||
NC = (int) 0xFFFFFFFF
|
||||
EFM_BC_EN = PF7
|
||||
} PinName;
|
||||
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
/* EFM32 pin modes */
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
PushPullDrive = gpioModePushPullDrive,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
WiredAndDrive = gpioModeWiredAndDrive,
|
||||
WiredAndDriveFilter = gpioModeWiredAndDriveFilter,
|
||||
WiredAndDrivePullUp = gpioModeWiredAndDrivePullUp,
|
||||
WiredAndDrivePullUpFilter = gpioModeWiredAndDrivePullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file PortNames.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_PORTNAMES_H
|
||||
#define MBED_PORTNAMES_H
|
||||
|
||||
#include "em_gpio.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PortA = gpioPortA, /**< Port A */
|
||||
PortB = gpioPortB, /**< Port B */
|
||||
PortC = gpioPortC, /**< Port C */
|
||||
PortD = gpioPortD, /**< Port D */
|
||||
PortE = gpioPortE, /**< Port E */
|
||||
PortF = gpioPortF /**< Port F */
|
||||
} PortName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file device.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_DEVICE_H
|
||||
#define MBED_DEVICE_H
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#include "objects.h"
|
||||
#include "Modules.h"
|
||||
#include "device_peripherals.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -23,29 +23,14 @@
|
|||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "em_gpio.h"
|
||||
#include "CommonPinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
typedef enum {
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15,
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15,
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15,
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15,
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15,
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15,
|
||||
EFM32_STANDARD_PIN_DEFINITIONS,
|
||||
|
||||
/* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
|
||||
LED0 = PF4,
|
||||
|
|
@ -67,48 +52,9 @@ typedef enum {
|
|||
/* Board Controller UART (USB) + enable pin */
|
||||
USBTX = PA0,
|
||||
USBRX = PA1,
|
||||
EFM_BC_EN = PA5,
|
||||
|
||||
/* Not connected */
|
||||
NC = (int) 0xFFFFFFFF
|
||||
EFM_BC_EN = PA5
|
||||
} PinName;
|
||||
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
/* EFM32 pin modes */
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,43 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file PortNames.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_PORTNAMES_H
|
||||
#define MBED_PORTNAMES_H
|
||||
|
||||
#include "em_gpio.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PortA = gpioPortA, /**< Port A */
|
||||
PortB = gpioPortB, /**< Port B */
|
||||
PortC = gpioPortC, /**< Port C */
|
||||
PortD = gpioPortD, /**< Port D */
|
||||
PortF = gpioPortF /**< Port F */
|
||||
} PortName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file device.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_DEVICE_H
|
||||
#define MBED_DEVICE_H
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#include "objects.h"
|
||||
#include "Modules.h"
|
||||
#include "device_peripherals.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -23,29 +23,14 @@
|
|||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "em_gpio.h"
|
||||
#include "CommonPinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
typedef enum {
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15,
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15,
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15,
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15,
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15,
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15,
|
||||
EFM32_STANDARD_PIN_DEFINITIONS,
|
||||
|
||||
/* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
|
||||
LED0 = PE2,
|
||||
|
|
@ -65,53 +50,9 @@ typedef enum {
|
|||
SERIAL_RX = PD1,
|
||||
USBTX = PE0,
|
||||
USBRX = PE1,
|
||||
EFM_BC_EN = PF7,
|
||||
|
||||
/* Not connected */
|
||||
NC = (int) 0xFFFFFFFF
|
||||
EFM_BC_EN = PF7
|
||||
} PinName;
|
||||
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
/* EFM32 pin modes */
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
PushPullDrive = gpioModePushPullDrive,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
WiredAndDrive = gpioModeWiredAndDrive,
|
||||
WiredAndDriveFilter = gpioModeWiredAndDriveFilter,
|
||||
WiredAndDrivePullUp = gpioModeWiredAndDrivePullUp,
|
||||
WiredAndDrivePullUpFilter = gpioModeWiredAndDrivePullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file PortNames.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_PORTNAMES_H
|
||||
#define MBED_PORTNAMES_H
|
||||
|
||||
#include "em_gpio.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PortA = gpioPortA, /**< Port A */
|
||||
PortB = gpioPortB, /**< Port B */
|
||||
PortC = gpioPortC, /**< Port C */
|
||||
PortD = gpioPortD, /**< Port D */
|
||||
PortE = gpioPortE, /**< Port E */
|
||||
PortF = gpioPortF /**< Port F */
|
||||
} PortName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file device.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_DEVICE_H
|
||||
#define MBED_DEVICE_H
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#include "objects.h"
|
||||
#include "Modules.h"
|
||||
#include "device_peripherals.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -23,29 +23,14 @@
|
|||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "em_gpio.h"
|
||||
#include "CommonPinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
typedef enum {
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15,
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15,
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15,
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15,
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15,
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15,
|
||||
EFM32_STANDARD_PIN_DEFINITIONS,
|
||||
|
||||
/* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
|
||||
LED0 = PC10,
|
||||
|
|
@ -65,53 +50,9 @@ typedef enum {
|
|||
SERIAL_RX = PD6,
|
||||
USBTX = PD4,
|
||||
USBRX = PD5,
|
||||
EFM_BC_EN = PA9,
|
||||
|
||||
/* Not connected */
|
||||
NC = (int) 0xFFFFFFFF
|
||||
EFM_BC_EN = PA9
|
||||
} PinName;
|
||||
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
/* EFM32 pin modes */
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
PushPullDrive = gpioModePushPullDrive,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
WiredAndDrive = gpioModeWiredAndDrive,
|
||||
WiredAndDriveFilter = gpioModeWiredAndDriveFilter,
|
||||
WiredAndDrivePullUp = gpioModeWiredAndDrivePullUp,
|
||||
WiredAndDrivePullUpFilter = gpioModeWiredAndDrivePullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,44 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file PortNames.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_PORTNAMES_H
|
||||
#define MBED_PORTNAMES_H
|
||||
|
||||
#include "em_gpio.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PortA = gpioPortA, /**< Port A */
|
||||
PortB = gpioPortB, /**< Port B */
|
||||
PortC = gpioPortC, /**< Port C */
|
||||
PortD = gpioPortD, /**< Port D */
|
||||
PortE = gpioPortE, /**< Port E */
|
||||
PortF = gpioPortF /**< Port F */
|
||||
} PortName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
/***************************************************************************//**
|
||||
* @file device.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_DEVICE_H
|
||||
#define MBED_DEVICE_H
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
// Redefine OPEN_MAX from sys_limits.h to save on RAM.
|
||||
// Effect: maximum amount of file handlers = OPEN_MAX
|
||||
// This is not going to have an impact, since this is a RAM-limited part anyway.
|
||||
#define OPEN_MAX 8
|
||||
|
||||
#include "objects.h"
|
||||
#include "Modules.h"
|
||||
#include "device_peripherals.h"
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,94 @@
|
|||
/***************************************************************************//**
|
||||
* @file PinNames.h
|
||||
*******************************************************************************
|
||||
* @section License
|
||||
* <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
|
||||
*******************************************************************************
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef MBED_COMMONPINNAMES_H
|
||||
#define MBED_COMMONPINNAMES_H
|
||||
|
||||
#include "em_gpio.h"
|
||||
|
||||
/* EFM32 Pin Names
|
||||
* First 4 bits represent pin number, the remaining
|
||||
* bits represent port number (A = 0, B = 1, ...)
|
||||
*/
|
||||
#define EFM32_STANDARD_PIN_DEFINITIONS \
|
||||
PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, \
|
||||
PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, \
|
||||
PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, \
|
||||
PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, \
|
||||
PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, \
|
||||
PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, \
|
||||
NC = (int) 0xFFFFFFFF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PIN_INPUT = 0,
|
||||
PIN_OUTPUT = 1
|
||||
} PinDirection;
|
||||
|
||||
/* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */
|
||||
typedef enum {
|
||||
/* EFM32 pin modes */
|
||||
Disabled = gpioModeDisabled,
|
||||
DisabledPullUp = gpioModeDisabled | 0x10,
|
||||
Input = gpioModeInput,
|
||||
InputFilter = gpioModeInput | 0x10,
|
||||
InputPullDown = gpioModeInputPull,
|
||||
InputPullUp = gpioModeInputPull | 0x10,
|
||||
InputPullFilterDown = gpioModeInputPullFilter,
|
||||
InputPullFilterUp = gpioModeInputPullFilter | 0x10,
|
||||
PushPull = gpioModePushPull,
|
||||
PushPullDrive = gpioModePushPullDrive,
|
||||
WiredOr = gpioModeWiredOr,
|
||||
WiredOrPullDown = gpioModeWiredOrPullDown,
|
||||
WiredAnd = gpioModeWiredAnd,
|
||||
WiredAndFilter = gpioModeWiredAndFilter,
|
||||
WiredAndPullUp = gpioModeWiredAndPullUp,
|
||||
WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter,
|
||||
WiredAndDrive = gpioModeWiredAndDrive,
|
||||
WiredAndDriveFilter = gpioModeWiredAndDriveFilter,
|
||||
WiredAndDrivePullUp = gpioModeWiredAndDrivePullUp,
|
||||
WiredAndDrivePullUpFilter = gpioModeWiredAndDrivePullUpFilter,
|
||||
|
||||
/* mbed modes:
|
||||
* PullUp, PullDown, PullNone, OpenDrain
|
||||
*
|
||||
* mbed default digital input mode:
|
||||
* PullDefault
|
||||
*
|
||||
* mbed default digital output mode:
|
||||
* PullNone
|
||||
*/
|
||||
PullUp = InputPullUp,
|
||||
PullDown = InputPullDown,
|
||||
OpenDrain = WiredAnd,
|
||||
PullNone = PushPull,
|
||||
PullDefault = PushPull
|
||||
} PinMode;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -23,20 +23,6 @@
|
|||
#ifndef MBED_DEVICE_H
|
||||
#define MBED_DEVICE_H
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#include "objects.h"
|
||||
#include "device_peripherals.h"
|
||||
|
||||
Loading…
Reference in New Issue