Adding consistent button pin mappings

targets/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/PinNames.h

@@ -203,6 +203,8 @@ typedef enum {
     //Push buttons
     SW1 = PTC3,
     SW3 = PTC12,
+    BUTTON1 = SW1,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTA2,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K66F/TARGET_FRDM/PinNames.h

@@ -204,6 +204,8 @@ typedef enum {
     //Push buttons
     SW2 = PTD11,
     SW3 = PTA10,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTB17,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/TARGET_FRDM/PinNames.h

@@ -134,6 +134,8 @@ typedef enum {
     //Push buttons
     SW2 = PTA4,
     SW3 = PTC6,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTC15,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL27Z/TARGET_FRDM/PinNames.h

@@ -98,6 +98,8 @@ typedef enum {
     //Push buttons
     SW1 = PTA4,
     SW3 = PTC1,
+    BUTTON1 = SW1,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTA2,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL43Z/TARGET_FRDM/PinNames.h

@@ -97,6 +97,8 @@ typedef enum {
     //Push buttons
     SW1 = PTA4,
     SW3 = PTC3,
+    BUTTON1 = SW1,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTA2,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL82Z/TARGET_FRDM/PinNames.h

@@ -118,6 +118,8 @@ typedef enum {
     //Push buttons
     SW2 = PTA4,
     SW3 = PTD0,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTB17,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KW24D/TARGET_FRDM/PinNames.h

@@ -82,6 +82,10 @@ typedef enum {
     SW2 = PTE3,
     SW3 = PTD1,
     SW4 = PTA19,
+    BUTTON1 = SW1,
+    BUTTON2 = SW2,
+    BUTTON3 = SW3,
+    BUTTON4 = SW4,
 
     // USB Pins
     USBTX = PTE0,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KW41Z/TARGET_FRDM/PinNames.h

@@ -69,6 +69,8 @@ typedef enum {
     //Push buttons
     SW3 = PTC4,
     SW4 = PTC5,
+    BUTTON1 = SW3,
+    BUTTON2 = SW4,
 
     // USB Pins
     USBTX = PTC7,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_MCU_K22F/TARGET_MCU_K22F512/TARGET_FRDM/PinNames.h

@@ -204,6 +204,8 @@ typedef enum {
     //Push buttons
     SW2 = PTC1,
     SW3 = PTB17,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTE0,

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_MCU_K64F/TARGET_FRDM/PinNames.h

@@ -204,6 +204,8 @@ typedef enum {
     //Push buttons
     SW2 = PTC6,
     SW3 = PTA4,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // USB Pins
     USBTX = PTB17,

targets/TARGET_Maxim/TARGET_MAX32600/TARGET_MAX32600MBED/PinNames.h

@@ -184,6 +184,8 @@ typedef enum {
     // Push button
     SW2 = P6_4,
     SW3 = P6_5,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // UART pins
     USBTX = P7_3,

targets/TARGET_Maxim/TARGET_MAX32610/TARGET_MAXWSNENV/PinNames.h

@@ -128,6 +128,7 @@ typedef enum {
 
     // Push button
     SW1 = P1_5,
+    BUTTON1 = SW1,
 
     // UART Pins
     UART0_RX  = P1_0,

targets/TARGET_Maxim/TARGET_MAX32620/TARGET_MAX32620HSP/PinNames.h

@@ -126,6 +126,9 @@ typedef enum {
     SW1 = P2_1,
     SW2 = NOT_CONNECTED,
     SW3 = NOT_CONNECTED,
+    BUTTON1 = SW1,
+    BUTTON2 = SW2,
+    BUTTON3 = SW3,
 
     // USB bridge connected UART pins
     USBTX = P0_1,

targets/TARGET_Maxim/TARGET_MAX32625/TARGET_MAX32625MBED/PinNames.h

@@ -76,6 +76,8 @@ typedef enum {
     // Push button
     SW2 = P2_2,
     SW3 = P2_3,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
 
     // USB bridge connected UART pins
     USBTX = P2_1,

targets/TARGET_Maxim/TARGET_MAX32625/TARGET_MAX32625NEXPAQ/PinNames.h

@@ -75,6 +75,9 @@ typedef enum {
     SW1 = P4_2,
     SW2 = P4_3,
     SW3 = P4_4,
+    BUTTON1 = SW1,
+    BUTTON2 = SW2,
+    BUTTON3 = SW3,
 
     // USB bridge connected UART pins
     USBTX = P2_1,

targets/TARGET_Maxim/TARGET_MAX32630/TARGET_MAX32630FTHR/PinNames.h

@@ -79,6 +79,9 @@ typedef enum {
     SW1 = P2_3,
     SW2 = NOT_CONNECTED,
     SW3 = NOT_CONNECTED,
+    BUTTON1 = SW1,
+    BUTTON2 = SW2,
+    BUTTON3 = SW3,
 
     // USB bridge connected UART pins
     USBTX = P2_1,

targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_DELTA_DFCM_NNN40/PinNames.h

@@ -136,6 +136,7 @@ typedef enum {
     A4  = p6,
 
     SWIO = p19,
+    BUTTON1 = SWIO,
     VERF0 = p0,
 
     // SPI for controlling internal flash, don't use it.

targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_HRM1017/PinNames.h

@@ -1,153 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2013 Nordic Semiconductor
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT  3
-
-typedef enum {
-    p0  = 0,
-    p1  = 1,
-    p2  = 2,
-    p3  = 3,
-    p4  = 4,
-    p5  = 5,
-    p6  = 6,
-    p7  = 7,
-    p8  = 8,
-    p9  = 9,
-    p10 = 10,
-    p11 = 11,
-    p12 = 12,
-    p13 = 13,
-    p14 = 14,
-    p15 = 15,
-    p16 = 16,
-    p17 = 17,
-    p18 = 18,
-    p19 = 19,
-    p20 = 20,
-    p21 = 21,
-    p22 = 22,
-    p23 = 23,
-    p24 = 24,
-    p25 = 25,
-    p26 = 26,
-    p27 = 27,
-    p28 = 28,
-    p29 = 29,
-    p30 = 30,
-//    p31=31,    
-    
-    P0_0  = p0,
-    P0_1  = p1,
-    P0_2  = p2,
-    P0_3  = p3,
-    P0_4  = p4,
-    P0_5  = p5,
-    P0_6  = p6,
-    P0_7  = p7,
-    
-    P0_8  = p8,
-    P0_9  = p9,
-    P0_10 = p10,
-    P0_11 = p11,
-    P0_12 = p12,
-    P0_13 = p13,
-    P0_14 = p14,
-    P0_15 = p15,
-    
-    P0_16 = p16,
-    P0_17 = p17,
-    P0_18 = p18,
-    P0_19 = p19,
-    P0_20 = p20,
-    P0_21 = p21,
-    P0_22 = p22,
-    P0_23 = p23,
-    
-    P0_24 = p24,
-    P0_25 = p25,
-    P0_26 = p26,
-    P0_27 = p27,
-    P0_28 = p28,
-    P0_29 = p29,
-    P0_30 = p30,
-    
-    LED1    = p18,
-    LED2    = p19,
-    LED3    = p18,
-    LED4    = p19,
-    
-    BUTTON1 = p16,
-    BUTTON2 = p17,
-        
-    RX_PIN_NUMBER = p11,
-    TX_PIN_NUMBER = p9,
-    CTS_PIN_NUMBER = p10,
-    RTS_PIN_NUMBER = p8,
-
-    // mBed interface Pins
-    USBTX = TX_PIN_NUMBER,
-    USBRX = RX_PIN_NUMBER,
-        
-    SPI_PSELMOSI0 = p20,
-    SPI_PSELMISO0 = p22,
-    SPI_PSELSS0 = p24,
-    SPI_PSELSCK0 = p25,
-        
-    SPI_PSELMOSI1 = p12,
-    SPI_PSELMISO1 = p13,
-    SPI_PSELSS1 = p14,
-    SPI_PSELSCK1 = p15,
-    
-    SPIS_PSELMOSI = p12,
-    SPIS_PSELMISO = p13,
-    SPIS_PSELSS = p14,    
-    SPIS_PSELSCK = p15,
-
-    I2C_SDA0 = p22,
-    I2C_SCL0 = p20,
-
-    I2C_SDA1 = p13,
-    I2C_SCL1 = p15,
-    // Not connected
-    NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
-    PullNone = 0,
-    PullDown = 1,
-    PullUp = 3,
-    PullDefault = PullUp
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif