STM32L5/STM32U5 : CAN suport

targets/TARGET_STM/TARGET_STM32L5/objects.h

@@ -154,10 +154,9 @@ struct dac_s {
 
 #if DEVICE_CAN
 struct can_s {
-    CAN_HandleTypeDef CanHandle;
+    FDCAN_HandleTypeDef CanHandle;
     int index;
     int hz;
-    int rxIrqEnabled;
 };
 #endif
 

targets/TARGET_STM/TARGET_STM32U5/objects.h

@@ -154,10 +154,9 @@ struct dac_s {
 
 #if DEVICE_CAN
 struct can_s {
-    CAN_HandleTypeDef CanHandle;
+    FDCAN_HandleTypeDef CanHandle;
     int index;
     int hz;
-    int rxIrqEnabled;
 };
 #endif
 

targets/TARGET_STM/can_api.c

@@ -68,7 +68,11 @@ static void _can_init_freq_direct(can_t *obj, const can_pinmap_t *pinmap, int hz
 {
     MBED_ASSERT((int)pinmap->peripheral != NC);
 
+#if defined(__HAL_RCC_FDCAN1_CLK_ENABLE)
+    __HAL_RCC_FDCAN1_CLK_ENABLE();
+#else
     __HAL_RCC_FDCAN_CLK_ENABLE();
+#endif
 
     if (pinmap->peripheral == CAN_1) {
         obj->index = 0;
@@ -90,8 +94,13 @@ static void _can_init_freq_direct(can_t *obj, const can_pinmap_t *pinmap, int hz
 
     // Select PLL1Q as source of FDCAN clock
     RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit;
+#if (defined RCC_PERIPHCLK_FDCAN1)
+    RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_FDCAN1;
+    RCC_PeriphClkInit.Fdcan1ClockSelection = RCC_FDCAN1CLKSOURCE_PLL1;
+#else
     RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_FDCAN;
-    RCC_PeriphClkInit.FdcanClockSelection = RCC_FDCANCLKSOURCE_PLL; // 10 MHz (RCC_OscInitStruct.PLL.PLLQ = 80)
+    RCC_PeriphClkInit.FdcanClockSelection = RCC_FDCANCLKSOURCE_PLL;
+#endif
 #if defined(DUAL_CORE) && (TARGET_STM32H7)
     while (LL_HSEM_1StepLock(HSEM, CFG_HW_RCC_SEMID)) {
     }
@@ -128,14 +137,18 @@ static void _can_init_freq_direct(can_t *obj, const can_pinmap_t *pinmap, int hz
     // !Attention Not all bitrates can be covered with all fdcan-core-clk values. When a clk
     // does not work for the desired bitrate, change system_clock settings for FDCAN_CLK
     // (default FDCAN_CLK is PLLQ)
-#ifdef TARGET_STM32G4
+#if (defined TARGET_STM32H7)
-    int ntq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_FDCAN) / hz;
-#else
     // STM32H7 doesn't support yet HAL_RCCEx_GetPeriphCLKFreq for FDCAN
     // We use PLL1.Q clock right now so get its frequency
     PLL1_ClocksTypeDef pll1_clocks;
     HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks);
     int ntq = pll1_clocks.PLL1_Q_Frequency / hz;
+#else
+#if (defined RCC_PERIPHCLK_FDCAN1)
+    int ntq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_FDCAN1) / hz;
+#else
+    int ntq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_FDCAN) / hz;
+#endif
 #endif
 
     int nominalPrescaler = 1;
@@ -250,7 +263,7 @@ void can_irq_free(can_t *obj)
     else {
         return;
     }
-#ifndef TARGET_STM32G4
+#if (defined TARGET_STM32H7)
     HAL_NVIC_DisableIRQ(FDCAN_CAL_IRQn);
 #endif
     can_irq_ids[obj->index] = 0;
@@ -262,12 +275,21 @@ void can_free(can_t *obj)
     while (LL_HSEM_1StepLock(HSEM, CFG_HW_RCC_SEMID)) {
     }
 #endif /* DUAL_CORE */
+#if defined(__HAL_RCC_FDCAN1_FORCE_RESET)
+    __HAL_RCC_FDCAN1_FORCE_RESET();
+    __HAL_RCC_FDCAN1_RELEASE_RESET();
+#else
     __HAL_RCC_FDCAN_FORCE_RESET();
     __HAL_RCC_FDCAN_RELEASE_RESET();
+#endif
 #if defined(DUAL_CORE) && (TARGET_STM32H7)
     LL_HSEM_ReleaseLock(HSEM, CFG_HW_RCC_SEMID, HSEM_CR_COREID_CURRENT);
 #endif /* DUAL_CORE */
+#if defined(__HAL_RCC_FDCAN1_CLK_DISABLE)
+    __HAL_RCC_FDCAN1_CLK_DISABLE();
+#else
     __HAL_RCC_FDCAN_CLK_DISABLE();
+#endif
 }
 
 
@@ -296,13 +318,17 @@ int can_frequency(can_t *obj, int f)
      * does not work for the desired bitrate, change system_clock settings for FDCAN_CLK
      * (default FDCAN_CLK is PLLQ)
      */
-#ifdef TARGET_STM32G4
+#if (defined TARGET_STM32H7)
-    int ntq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_FDCAN) / f;
-#else
     // STM32H7 doesn't support yet HAL_RCCEx_GetPeriphCLKFreq for FDCAN
     PLL1_ClocksTypeDef pll1_clocks;
     HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks);
     int ntq = pll1_clocks.PLL1_Q_Frequency / f;
+#else
+#if (defined RCC_PERIPHCLK_FDCAN1)
+    int ntq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_FDCAN1) / f;
+#else
+    int ntq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_FDCAN) / f;
+#endif
 #endif
 
     int nominalPrescaler = 1;
@@ -520,7 +546,7 @@ static void can_irq(CANName name, int id)
             irq_handler(can_irq_ids[id], IRQ_TX);
         }
     }
-#ifndef TARGET_STM32G4
+#if (defined FDCAN_IT_RX_BUFFER_NEW_MESSAGE)
     if (__HAL_FDCAN_GET_IT_SOURCE(&CanHandle, FDCAN_IT_RX_BUFFER_NEW_MESSAGE)) {
         if (__HAL_FDCAN_GET_FLAG(&CanHandle, FDCAN_IT_RX_BUFFER_NEW_MESSAGE)) {
             __HAL_FDCAN_CLEAR_FLAG(&CanHandle, FDCAN_IT_RX_BUFFER_NEW_MESSAGE);
@@ -602,7 +628,7 @@ void can_irq_set(can_t *obj, CanIrqType type, uint32_t enable)
             interrupts = FDCAN_IT_TX_COMPLETE;
             break;
         case IRQ_RX:
-#ifndef TARGET_STM32G4
+#if (defined FDCAN_IT_RX_BUFFER_NEW_MESSAGE)
             interrupts = FDCAN_IT_RX_BUFFER_NEW_MESSAGE;
 #else
             interrupts = FDCAN_IT_RX_FIFO0_NEW_MESSAGE;

targets/targets.json

@@ -4147,6 +4147,7 @@
         },
         "device_has_add": [
             "ANALOGOUT",
+            "CAN",
             "CRC",
             "FLASH",
             "MPU",
@@ -4262,6 +4263,7 @@
         },
         "device_has_add": [
             "ANALOGOUT",
+            "CAN",
             "CRC",
             "FLASH",
             "MPU",