STM32F3 ADC internal channels update

targets/TARGET_STM/TARGET_STM32F3/analogin_device.c

@@ -35,11 +35,9 @@
 #include "pinmap.h"
 #include "mbed_error.h"
 #include "PeripheralPins.h"
-#include <stdbool.h>
 
 void analogin_init(analogin_t *obj, PinName pin)
 {
-    static bool adc_calibrated = false;
     uint32_t function = (uint32_t)NC;
 
     // ADC Internal Channels "pins"  (Temperature, Vref, Vbat, ...)
@@ -106,12 +104,10 @@ void analogin_init(analogin_t *obj, PinName pin)
 #endif
 
     if (HAL_ADC_Init(&obj->handle) != HAL_OK) {
-        error("Cannot initialize ADC");
+        error("Cannot initialize ADC\n");
     }
 
-    // ADC calibration is done only once
+    if (!HAL_ADCEx_Calibration_GetValue(&obj->handle, ADC_SINGLE_ENDED)) {
-    if (!adc_calibrated) {
-        adc_calibrated = true;
         HAL_ADCEx_Calibration_Start(&obj->handle, ADC_SINGLE_ENDED);
     }
 }
@@ -171,16 +167,47 @@ uint16_t adc_read(analogin_t *obj)
             sConfig.Channel = ADC_CHANNEL_14;
             break;
         case 15:
-            sConfig.Channel = ADC_CHANNEL_15;
+            if ((ADCName)obj->handle.Instance == ADC_1) {
+                sConfig.Channel = ADC_CHANNEL_VOPAMP1;
+                sConfig.SamplingTime = ADC_SAMPLETIME_181CYCLES_5;
+            }
+            else {
+                sConfig.Channel = ADC_CHANNEL_15;
+            }
             break;
         case 16:
-            sConfig.Channel = ADC_CHANNEL_16;
+            if ((ADCName)obj->handle.Instance == ADC_1) {
+                sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
+                sConfig.SamplingTime = ADC_SAMPLETIME_181CYCLES_5;
+            }
+            else {
+                sConfig.Channel = ADC_CHANNEL_16;
+            }
             break;
         case 17:
-            sConfig.Channel = ADC_CHANNEL_17;
+            sConfig.SamplingTime = ADC_SAMPLETIME_181CYCLES_5;
+            if ((ADCName)obj->handle.Instance == ADC_1) {
+                sConfig.Channel = ADC_CHANNEL_VBAT;
+            }
+#if defined(ADC2)
+            if ((ADCName)obj->handle.Instance == ADC_2) {
+                sConfig.Channel = ADC_CHANNEL_VOPAMP2;
+            }
+#endif
+#if defined(ADC3)
+            if ((ADCName)obj->handle.Instance == ADC_3) {
+                sConfig.Channel = ADC_CHANNEL_VOPAMP3;
+            }
+#endif
+#if defined(ADC4)
+            if ((ADCName)obj->handle.Instance == ADC_4) {
+                sConfig.Channel = ADC_CHANNEL_VOPAMP4;
+            }
+#endif
             break;
         case 18:
-            sConfig.Channel = ADC_CHANNEL_18;
+            sConfig.SamplingTime = ADC_SAMPLETIME_181CYCLES_5;
+            sConfig.Channel = ADC_CHANNEL_VREFINT;
             break;
         default:
             return 0;

targets/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_adc.h

@@ -48,6 +48,9 @@
 /* (include on top of file since ADC structures are defined in extended file) */
 #include "stm32f3xx_hal_adc_ex.h"
 
+/* Include low level driver */
+#include "stm32f3xx_ll_adc.h"
+
 /** @addtogroup STM32F3xx_HAL_Driver
   * @{
   */

targets/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_adc_ex.c

@@ -5660,12 +5660,6 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf
       /* Set handle of the other ADC sharing the same common register         */
       ADC_COMMON_ADC_OTHER(hadc, &tmphadcSharingSameCommonRegister);
       
-      /* Software is allowed to change common parameters only when all ADCs   */
-      /* of the common group are disabled.                                    */
-      if ((ADC_IS_ENABLE(hadc) == RESET)                                    &&
-          ( (tmphadcSharingSameCommonRegister.Instance == NULL)         ||
-            (ADC_IS_ENABLE(&tmphadcSharingSameCommonRegister) == RESET)   )   )
-      {
         /* If Channel_16 is selected, enable Temp. sensor measurement path    */
         /* Note: Temp. sensor internal channels available on ADC1 only        */
         if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) && (hadc->Instance == ADC1))
@@ -5694,17 +5688,6 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf
         {
           SET_BIT(tmpADC_Common->CCR, ADC_CCR_VREFEN);
         }
-      }
-      /* If the requested internal measurement path has already been          */
-      /* enabled and other ADC of the common group are enabled, internal      */
-      /* measurement paths cannot be enabled.                                 */
-      else  
-      {
-        /* Update ADC state machine to error */
-        SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
-        
-        tmp_hal_status = HAL_ERROR;
-      }
     }
     
   }