Remove WALLBOT_BLE target

targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_WALLBOT_BLE/PinNames.h

@@ -1,180 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2013 Nordic Semiconductor
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
-    p0  = 0,
-    p1  = 1,
-    p2  = 2,
-    p3  = 3,
-    p4  = 4,
-    p5  = 5,
-    p6  = 6,
-    p7  = 7,
-    p8  = 8,
-    p9  = 9,
-    p10 = 10,
-    p11 = 11,
-    p12 = 12,
-    p13 = 13,
-    p14 = 14,
-    p15 = 15,
-    p16 = 16,
-    p17 = 17,
-    p18 = 18,
-    p19 = 19,
-    p20 = 20,
-    p21 = 21,
-    p22 = 22,
-    p23 = 23,
-    p24 = 24,
-    p25 = 25,
-    p26 = 26,
-    p27 = 27,
-    p28 = 28,
-    p29 = 29,
-    p30 = 30,
-
-    P0_0  = p0,
-    P0_1  = p1,
-    P0_2  = p2,
-    P0_3  = p3,
-    P0_4  = p4,
-    P0_5  = p5,
-    P0_6  = p6,
-    P0_7  = p7,
-
-    P0_8  = p8,
-    P0_9  = p9,
-    P0_10 = p10,
-    P0_11 = p11,
-    P0_12 = p12,
-    P0_13 = p13,
-    P0_14 = p14,
-    P0_15 = p15,
-
-    P0_16 = p16,
-    P0_17 = p17,
-    P0_18 = p18,
-    P0_19 = p19,
-    P0_20 = p20,
-    P0_21 = p21,
-    P0_22 = p22,
-    P0_23 = p23,
-
-    P0_24 = p24,
-    P0_25 = p25,
-    P0_26 = p26,
-    P0_27 = p27,
-    P0_28 = p28,
-    P0_29 = p29,
-    P0_30 = p30,
-
-    LED1  = p18,
-    LED2  = p19,
-    LED3  = p18,
-    LED4  = p19,
-
-    BUTTON1 = p16,
-    BUTTON2 = p17,
-
-    RX_PIN_NUMBER = p11,
-    TX_PIN_NUMBER = p9,
-    CTS_PIN_NUMBER = 31, // unused
-    RTS_PIN_NUMBER = 31, // unused
-
-    // mbed interface pins
-    USBTX = TX_PIN_NUMBER,
-    USBRX = RX_PIN_NUMBER,
-
-    SPI_PSELMOSI0 = p20,
-    SPI_PSELMISO0 = p22,
-    SPI_PSELSS0 = p24,
-    SPI_PSELSCK0 = p25,
-
-    SPI_PSELMOSI1 = p12,
-    SPI_PSELMISO1 = p13,
-    SPI_PSELSS1 = p14,
-    SPI_PSELSCK1 = p15,
-
-    SPIS_PSELMOSI = p12,
-    SPIS_PSELMISO = p13,
-    SPIS_PSELSS = p14,
-    SPIS_PSELSCK = p15,
-
-    LED_CONNECT = P0_18,
-    LED_MODE = P0_19,
-    OUT_LOW= P0_20,
-    SW1 = P0_16,
-    SW2 = P0_17,
-
-    R_PWM = P0_28,
-    R_IN1 = P0_30,
-    R_IN2 = P0_0,
-    L_PWM = P0_29,
-    L_IN1 = P0_23,
-    L_IN2 = P0_24,
-
-    MMC_SCK = P0_15,
-    MMC_CS = P0_14,
-    MMC_SDO = P0_13,
-    MMC_SDI = P0_12,
-
-    R_ENC1 = P0_8,
-    R_ENC2 = P0_10,
-    L_ENC1 = P0_6,
-    L_ENC2 = P0_7,
-
-    P1IN = P0_2,
-    P2IN = P0_3,
-    P3IN = P0_4,
-    P4IN = P0_5,
-
-    I2C_SCL = P0_21,
-    I2C_SDA = P0_22,
-
-    I2C_SCL0 = P0_21, //required definition for the i2c patch
-    I2C_SDA0 = P0_22, //required definition for the i2c patch
-
-    // Not connected
-    NC = (int)0xFFFFFFFF
-
-} PinName;
-
-typedef enum {
-    PullNone = 0,
-    PullDown = 1,
-    PullUp = 3,
-    PullDefault = PullUp
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_WALLBOT_BLE/device.h

@@ -1,38 +0,0 @@
-// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches.
-// Check the 'features' section of the target description in 'targets.json' for more details.
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_DEVICE_H
-#define MBED_DEVICE_H
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#include "objects.h"
-
-#endif

targets/targets.json

@@ -5586,39 +5586,6 @@
             "4005"
         ]
     },
-    "WALLBOT_BLE": {
-        "inherits": [
-            "MCU_NRF51_16K"
-        ],
-        "release_versions": [
-            "2"
-        ],
-        "detect_code": [
-            "1140"
-        ]
-    },
-    "WALLBOT_BLE_BOOT": {
-        "inherits": [
-            "MCU_NRF51_16K_BOOT"
-        ],
-        "extra_labels_add": [
-            "WALLBOT_BLE"
-        ],
-        "macros_add": [
-            "TARGET_WALLBOT_BLE"
-        ]
-    },
-    "WALLBOT_BLE_OTA": {
-        "inherits": [
-            "MCU_NRF51_16K_OTA"
-        ],
-        "extra_labels_add": [
-            "WALLBOT_BLE"
-        ],
-        "macros_add": [
-            "TARGET_WALLBOT_BLE"
-        ]
-    },
     "NRF51_DK_LEGACY": {
         "supported_form_factors": [
             "ARDUINO"

tools/tests.py

@@ -499,7 +499,6 @@ TESTS = [
                         "ARCH_BLE", "ARCH_BLE_BOOT", "ARCH_BLE_OTA",
                         "ARCH_LINK", "ARCH_LINK_BOOT", "ARCH_LINK_OTA",
                         "SEEED_TINY_BLE", "SEEED_TINY_BLE_BOOT", "SEEED_TINY_BLE_OTA",
-                        "WALLBOT_BLE", "WALLBOT_BLE_BOOT", "WALLBOT_BLE_OTA",
                         "LPC1114"],
         #"host_test": "rtc_auto",
     },