diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/startup_stm32l476xx.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/startup_stm32l476xx.s new file mode 100644 index 0000000000..f584368489 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/startup_stm32l476xx.s @@ -0,0 +1,418 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32l476xx.s +;* Author : MCD Application Team +;* Version : V1.0.0 +;* Date : 26-June-2015 +;* Description : STM32L476xx Ultra Low Power devices vector table for MDK-ARM_MICRO toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size + +;FAIL __initial_sp EQU 0x20020000 ; Top of RAM +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000400 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1, ADC2 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD DFSDM3_IRQHandler ; SD Filter 3 global Interrupt + DCD TIM8_BRK_IRQHandler ; TIM8 Break Interrupt + DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation Interrupt + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt + DCD ADC3_IRQHandler ; ADC3 global Interrupt + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD DFSDM0_IRQHandler ; SD Filter 0 global Interrupt + DCD DFSDM1_IRQHandler ; SD Filter 1 global Interrupt + DCD DFSDM2_IRQHandler ; SD Filter 2 global Interrupt + DCD COMP_IRQHandler ; COMP Interrupt + DCD LPTIM1_IRQHandler ; LP TIM1 interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 interrupt + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 + DCD LPUART1_IRQHandler ; LP UART1 interrupt + DCD QUADSPI_IRQHandler ; Quad SPI global interrupt + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt + DCD SAI2_IRQHandler ; Serial Audio Interface 2 global interrupt + DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt + DCD TSC_IRQHandler ; Touch Sense Controller global interrupt + DCD LCD_IRQHandler ; LCD global interrupt + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG global interrupt + DCD FPU_IRQHandler ; FPU + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT DFSDM3_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT DFSDM0_IRQHandler [WEAK] + EXPORT DFSDM1_IRQHandler [WEAK] + EXPORT DFSDM2_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Channel6_IRQHandler [WEAK] + EXPORT DMA2_Channel7_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT SWPMI1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +DFSDM3_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +DFSDM0_IRQHandler +DFSDM1_IRQHandler +DFSDM2_IRQHandler +COMP_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +OTG_FS_IRQHandler +DMA2_Channel6_IRQHandler +DMA2_Channel7_IRQHandler +LPUART1_IRQHandler +QUADSPI_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +SAI1_IRQHandler +SAI2_IRQHandler +SWPMI1_IRQHandler +TSC_IRQHandler +LCD_IRQHandler +RNG_IRQHandler +FPU_IRQHandler + + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/stm32l476xx.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/stm32l476xx.sct new file mode 100644 index 0000000000..4b652c4753 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/stm32l476xx.sct @@ -0,0 +1,49 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2015, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; 1MB FLASH (0x100000) + 128KB SRAM (0x20000) +LR_IROM1 0x08000000 0x100000 { ; load region size_region + + ER_IROM1 0x08000000 0x100000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM + RW_IRAM1 (0x20000000+0x188) (0x20000-0x188) { ; RW data + .ANY (+RW +ZI) + } + + RW_IRAM2 0x10000000 0x00008000 { + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/sys.cpp new file mode 100644 index 0000000000..bb665909b9 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_MICRO/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/startup_stm32l476xx.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/startup_stm32l476xx.s new file mode 100644 index 0000000000..7e7747a02e --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/startup_stm32l476xx.s @@ -0,0 +1,389 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32l476xx.s +;* Author : MCD Application Team +;* Version : V1.0.0 +;* Date : 26-June-2015 +;* Description : STM32L476xx Ultra Low Power devices vector table for MDK-ARM_STD toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +__initial_sp EQU 0x20020000 ; Top of RAM + + PRESERVE8 + THUMB + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1, ADC2 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD DFSDM3_IRQHandler ; SD Filter 3 global Interrupt + DCD TIM8_BRK_IRQHandler ; TIM8 Break Interrupt + DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation Interrupt + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt + DCD ADC3_IRQHandler ; ADC3 global Interrupt + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD DFSDM0_IRQHandler ; SD Filter 0 global Interrupt + DCD DFSDM1_IRQHandler ; SD Filter 1 global Interrupt + DCD DFSDM2_IRQHandler ; SD Filter 2 global Interrupt + DCD COMP_IRQHandler ; COMP Interrupt + DCD LPTIM1_IRQHandler ; LP TIM1 interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 interrupt + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 + DCD LPUART1_IRQHandler ; LP UART1 interrupt + DCD QUADSPI_IRQHandler ; Quad SPI global interrupt + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt + DCD SAI2_IRQHandler ; Serial Audio Interface 2 global interrupt + DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt + DCD TSC_IRQHandler ; Touch Sense Controller global interrupt + DCD LCD_IRQHandler ; LCD global interrupt + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG global interrupt + DCD FPU_IRQHandler ; FPU + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT DFSDM3_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT DFSDM0_IRQHandler [WEAK] + EXPORT DFSDM1_IRQHandler [WEAK] + EXPORT DFSDM2_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Channel6_IRQHandler [WEAK] + EXPORT DMA2_Channel7_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT SWPMI1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +DFSDM3_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +DFSDM0_IRQHandler +DFSDM1_IRQHandler +DFSDM2_IRQHandler +COMP_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +OTG_FS_IRQHandler +DMA2_Channel6_IRQHandler +DMA2_Channel7_IRQHandler +LPUART1_IRQHandler +QUADSPI_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +SAI1_IRQHandler +SAI2_IRQHandler +SWPMI1_IRQHandler +TSC_IRQHandler +LCD_IRQHandler +RNG_IRQHandler +FPU_IRQHandler + + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/stm32l476xx.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/stm32l476xx.sct new file mode 100644 index 0000000000..4b652c4753 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/stm32l476xx.sct @@ -0,0 +1,49 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2015, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; 1MB FLASH (0x100000) + 128KB SRAM (0x20000) +LR_IROM1 0x08000000 0x100000 { ; load region size_region + + ER_IROM1 0x08000000 0x100000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM + RW_IRAM1 (0x20000000+0x188) (0x20000-0x188) { ; RW data + .ANY (+RW +ZI) + } + + RW_IRAM2 0x10000000 0x00008000 { + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/sys.cpp new file mode 100644 index 0000000000..bb665909b9 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_ARM_STD/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_GCC_ARM/STM32L476XX.ld b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_GCC_ARM/STM32L476XX.ld new file mode 100644 index 0000000000..5bc54cd929 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_GCC_ARM/STM32L476XX.ld @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 128K - 0x188 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_GCC_ARM/startup_stm32l476xx.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_GCC_ARM/startup_stm32l476xx.s new file mode 100644 index 0000000000..c006305dc9 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_GCC_ARM/startup_stm32l476xx.s @@ -0,0 +1,529 @@ +/** + ****************************************************************************** + * @file startup_stm32l476xx.s + * @author MCD Application Team + * @version V1.0.0 + * @date 26-June-2015 + * @brief STM32L476xx devices vector table for Atollic + * TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF1E0F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Atollic update: set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + //bl __libc_init_array +/* Call the application's entry point.*/ + //bl main + // Calling the crt0 'cold-start' entry point. There __libc_init_array is called + // and when existing hardware_init_hook() and software_init_hook() before + // starting main(). software_init_hook() is available and has to be called due + // to initializsation when using rtos. + bl _start + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_2_IRQHandler + .word CAN1_TX_IRQHandler + .word CAN1_RX0_IRQHandler + .word CAN1_RX1_IRQHandler + .word CAN1_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_TIM15_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word DFSDM3_IRQHandler + .word TIM8_BRK_IRQHandler + .word TIM8_UP_IRQHandler + .word TIM8_TRG_COM_IRQHandler + .word TIM8_CC_IRQHandler + .word ADC3_IRQHandler + .word FMC_IRQHandler + .word SDMMC1_IRQHandler + .word TIM5_IRQHandler + .word SPI3_IRQHandler + .word UART4_IRQHandler + .word UART5_IRQHandler + .word TIM6_DAC_IRQHandler + .word TIM7_IRQHandler + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word DFSDM0_IRQHandler + .word DFSDM1_IRQHandler + .word DFSDM2_IRQHandler + .word COMP_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word OTG_FS_IRQHandler + .word DMA2_Channel6_IRQHandler + .word DMA2_Channel7_IRQHandler + .word LPUART1_IRQHandler + .word QUADSPI_IRQHandler + .word I2C3_EV_IRQHandler + .word I2C3_ER_IRQHandler + .word SAI1_IRQHandler + .word SAI2_IRQHandler + .word SWPMI1_IRQHandler + .word TSC_IRQHandler + .word LCD_IRQHandler + .word 0 + .word RNG_IRQHandler + .word FPU_IRQHandler + + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_2_IRQHandler + .thumb_set ADC1_2_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM15_IRQHandler + .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak DFSDM3_IRQHandler + .thumb_set DFSDM3_IRQHandler,Default_Handler + + .weak TIM8_BRK_IRQHandler + .thumb_set TIM8_BRK_IRQHandler,Default_Handler + + .weak TIM8_UP_IRQHandler + .thumb_set TIM8_UP_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_IRQHandler + .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak ADC3_IRQHandler + .thumb_set ADC3_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak DFSDM0_IRQHandler + .thumb_set DFSDM0_IRQHandler,Default_Handler + + .weak DFSDM1_IRQHandler + .thumb_set DFSDM1_IRQHandler,Default_Handler + + .weak DFSDM2_IRQHandler + .thumb_set DFSDM2_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Channel6_IRQHandler + .thumb_set DMA2_Channel6_IRQHandler,Default_Handler + + .weak DMA2_Channel7_IRQHandler + .thumb_set DMA2_Channel7_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak SWPMI1_IRQHandler + .thumb_set SWPMI1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak LCD_IRQHandler + .thumb_set LCD_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_IAR/startup_stm32l476xx.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_IAR/startup_stm32l476xx.s new file mode 100644 index 0000000000..57bbda040c --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_IAR/startup_stm32l476xx.s @@ -0,0 +1,637 @@ +;/******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32l476xx.s +;* Author : MCD Application Team +;* Version : V1.0.0 +;* Date : 26-June-2015 +;* Description : STM32L476xx Ultra Low Power Devices vector +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1, ADC2 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD DFSDM3_IRQHandler ; SD Filter 3 global Interrupt + DCD TIM8_BRK_IRQHandler ; TIM8 Break Interrupt + DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation Interrupt + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt + DCD ADC3_IRQHandler ; ADC3 global Interrupt + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD DFSDM0_IRQHandler ; SD Filter 0 global Interrupt + DCD DFSDM1_IRQHandler ; SD Filter 1 global Interrupt + DCD DFSDM2_IRQHandler ; SD Filter 2 global Interrupt + DCD COMP_IRQHandler ; COMP Interrupt + DCD LPTIM1_IRQHandler ; LP TIM1 interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 interrupt + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 + DCD LPUART1_IRQHandler ; LP UART 1 interrupt + DCD QUADSPI_IRQHandler ; Quad SPI global interrupt + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt + DCD SAI2_IRQHandler ; Serial Audio Interface 2 global interrupt + DCD SWPMI1_IRQHandler ; Serial Wire Interface global interrupt + DCD TSC_IRQHandler ; Touch Sense Controller global interrupt + DCD LCD_IRQHandler ; LCD global interrupt + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG global interrupt + DCD FPU_IRQHandler ; FPU + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_IRQHandler + B TAMP_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_2_IRQHandler + B ADC1_2_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_SCE_IRQHandler + B CAN1_SCE_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_TIM15_IRQHandler + B TIM1_BRK_TIM15_IRQHandler + + PUBWEAK TIM1_UP_TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM16_IRQHandler + B TIM1_UP_TIM16_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM17_IRQHandler + B TIM1_TRG_COM_TIM17_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + PUBWEAK TIM4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM4_IRQHandler + B TIM4_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK USART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART3_IRQHandler + B USART3_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK DFSDM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM3_IRQHandler + B DFSDM3_IRQHandler + + PUBWEAK TIM8_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_BRK_IRQHandler + B TIM8_BRK_IRQHandler + + PUBWEAK TIM8_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_UP_IRQHandler + B TIM8_UP_IRQHandler + + PUBWEAK TIM8_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_TRG_COM_IRQHandler + B TIM8_TRG_COM_IRQHandler + + PUBWEAK TIM8_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_CC_IRQHandler + B TIM8_CC_IRQHandler + + PUBWEAK ADC3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC3_IRQHandler + B ADC3_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK SDMMC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDMMC1_IRQHandler + B SDMMC1_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK UART5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART5_IRQHandler + B UART5_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK DMA2_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel1_IRQHandler + B DMA2_Channel1_IRQHandler + + PUBWEAK DMA2_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel2_IRQHandler + B DMA2_Channel2_IRQHandler + + PUBWEAK DMA2_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel3_IRQHandler + B DMA2_Channel3_IRQHandler + + PUBWEAK DMA2_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel4_IRQHandler + B DMA2_Channel4_IRQHandler + + PUBWEAK DMA2_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel5_IRQHandler + B DMA2_Channel5_IRQHandler + + PUBWEAK DFSDM0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM0_IRQHandler + B DFSDM0_IRQHandler + + PUBWEAK DFSDM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM1_IRQHandler + B DFSDM1_IRQHandler + + PUBWEAK DFSDM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DFSDM2_IRQHandler + B DFSDM2_IRQHandler + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +COMP_IRQHandler + B COMP_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK OTG_FS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_IRQHandler + B OTG_FS_IRQHandler + + PUBWEAK DMA2_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel6_IRQHandler + B DMA2_Channel6_IRQHandler + + PUBWEAK DMA2_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel7_IRQHandler + B DMA2_Channel7_IRQHandler + + PUBWEAK LPUART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPUART1_IRQHandler + B LPUART1_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK SAI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI1_IRQHandler + B SAI1_IRQHandler + + PUBWEAK SAI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI2_IRQHandler + B SAI2_IRQHandler + + PUBWEAK SWPMI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SWPMI1_IRQHandler + B SWPMI1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK LCD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LCD_IRQHandler + B LCD_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_IAR/stm32l476xx.icf b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_IAR/stm32l476xx.icf new file mode 100644 index 0000000000..0b25af6ef9 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/TOOLCHAIN_IAR/stm32l476xx.icf @@ -0,0 +1,35 @@ +/* [ROM = 1024kb = 0x100000] */ +define symbol __intvec_start__ = 0x08000000; +define symbol __region_ROM_start__ = 0x08000000; +define symbol __region_ROM_end__ = 0x080FFFFF; + +/* [RAM = 128kb = 0x20000] */ +/* Vector table dynamic copy: Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM */ +define symbol __NVIC_start__ = 0x20000000; +define symbol __NVIC_end__ = 0x20000187; /* Aligned on 8 bytes (392 = 49 x 8) */ +define symbol __region_RAM_start__ = 0x20000188; +define symbol __region_RAM_end__ = 0x2001FFFF; +define symbol __region_SRAM2_start__ = 0x10000000; +define symbol __region_SRAM2_end__ = 0x10007FFF; + +/* Memory regions */ +define memory mem with size = 4G; +define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__]; +define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__]; +define region SRAM2_region = mem:[from __region_SRAM2_start__ to __region_SRAM2_end__]; + +/* Stack 1/8 and Heap 1/4 of RAM */ +define symbol __size_cstack__ = 0x4000; +define symbol __size_heap__ = 0x8000; +define block CSTACK with alignment = 8, size = __size_cstack__ { }; +define block HEAP with alignment = 8, size = __size_heap__ { }; +define block STACKHEAP with fixed order { block HEAP, block CSTACK }; + +initialize by copy with packing = zeros { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, block STACKHEAP }; +place in SRAM2_region { }; \ No newline at end of file diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis.h new file mode 100644 index 0000000000..41a1233f3b --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis.h @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32l4xx.h" +#include "cmsis_nvic.h" + +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis_nvic.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis_nvic.c new file mode 100644 index 0000000000..9263c748e7 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis_nvic.c @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "cmsis_nvic.h" + +#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM +#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { + uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t i; + + // Copy and switch to dynamic vectors if the first time called + if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) { + uint32_t *old_vectors = vectors; + vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS; + for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS; + } + vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + +uint32_t NVIC_GetVector(IRQn_Type IRQn) { + uint32_t *vectors = (uint32_t*)SCB->VTOR; + return vectors[IRQn + NVIC_USER_IRQ_OFFSET]; +} diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis_nvic.h new file mode 100644 index 0000000000..2af8d33e21 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/cmsis_nvic.h @@ -0,0 +1,54 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_NVIC_H +#define MBED_CMSIS_NVIC_H + +// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F +// MCU Peripherals: 82 vectors = 328 bytes from 0x40 to 0x187 +// Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM +#define NVIC_NUM_VECTORS 98 +#define NVIC_USER_IRQ_OFFSET 16 + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector); +uint32_t NVIC_GetVector(IRQn_Type IRQn); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/hal_tick.c new file mode 100644 index 0000000000..48e22d387b --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/hal_tick.c @@ -0,0 +1,121 @@ +/** + ****************************************************************************** + * @file hal_tick.c + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#include "hal_tick.h" + +TIM_HandleTypeDef TimMasterHandle; +uint32_t PreviousVal = 0; + +void us_ticker_irq_handler(void); + +void timer_irq_handler(void) { + // Channel 1 for mbed timeout + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) { + us_ticker_irq_handler(); + } + + // Channel 2 for HAL tick + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2); + uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle); + if ((val - PreviousVal) >= HAL_TICK_DELAY) { + // Increment HAL variable + HAL_IncTick(); + // Prepare next interrupt + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY); + PreviousVal = val; +#if 0 // For DEBUG only + HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6); +#endif + } + } +} + +// Reconfigure the HAL tick using a standard timer instead of systick. +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { + // Enable timer clock + TIM_MST_RCC; + + // Reset timer + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; + + // Update the SystemCoreClock variable + SystemCoreClockUpdate(); + + // Configure time base + TimMasterHandle.Instance = TIM_MST; + TimMasterHandle.Init.Period = 0xFFFFFFFF; + TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick + TimMasterHandle.Init.ClockDivision = 0; + TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + HAL_TIM_OC_Init(&TimMasterHandle); + + NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler); + NVIC_EnableIRQ(TIM_MST_IRQ); + + // Channel 1 for mbed timeout + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1); + + // Channel 2 for HAL tick + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2); + PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle); + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY); + __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); + +#if 0 // For DEBUG only + __GPIOB_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); +#endif + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/hal_tick.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/hal_tick.h new file mode 100644 index 0000000000..1fe17e9f84 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/hal_tick.h @@ -0,0 +1,60 @@ +/** + ****************************************************************************** + * @file hal_tick.h + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#ifndef __HAL_TICK_H +#define __HAL_TICK_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stm32l4xx.h" +#include "cmsis_nvic.h" + +#define TIM_MST TIM5 +#define TIM_MST_IRQ TIM5_IRQn +#define TIM_MST_RCC __TIM5_CLK_ENABLE() + +#define TIM_MST_RESET_ON __TIM5_FORCE_RESET() +#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET() + +#define HAL_TICK_DELAY (1000) // 1 ms + +#ifdef __cplusplus +} +#endif + +#endif // __HAL_TICK_H + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/stm32l476xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/stm32l476xx.h new file mode 100644 index 0000000000..b37d205849 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/stm32l476xx.h @@ -0,0 +1,9784 @@ +/** + ****************************************************************************** + * @file stm32l476xx.h + * @author MCD Application Team + * @version V1.0.0 + * @date 26-June-2015 + * @brief CMSIS STM32L476xx Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32l476xx + * @{ + */ + +#ifndef __STM32L476xx_H +#define __STM32L476xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 0x0001 /*!< Cortex-M4 revision r0p1 */ +#define __MPU_PRESENT 1 /*!< STM32L4XX provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< STM32L4XX uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32L4XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 4 Cortex-M4 Memory Management Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection Interrupts */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1, ADC2 SAR global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break interrupt and TIM15 global interrupt */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update Interrupt and TIM16 global interrupt */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM17 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + DFSDM3_IRQn = 42, /*!< SD Filter 3 global Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + DFSDM0_IRQn = 61, /*!< SD Filter 0 global Interrupt */ + DFSDM1_IRQn = 62, /*!< SD Filter 1 global Interrupt */ + DFSDM2_IRQn = 63, /*!< SD Filter 2 global Interrupt */ + COMP_IRQn = 64, /*!< COMP1 and COMP2 Interrupts */ + LPTIM1_IRQn = 65, /*!< LP TIM1 interrupt */ + LPTIM2_IRQn = 66, /*!< LP TIM2 interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Channel6_IRQn = 68, /*!< DMA2 Channel 6 global interrupt */ + DMA2_Channel7_IRQn = 69, /*!< DMA2 Channel 7 global interrupt */ + LPUART1_IRQn = 70, /*!< LP UART1 interrupt */ + QUADSPI_IRQn = 71, /*!< Quad SPI global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + SAI1_IRQn = 74, /*!< Serial Audio Interface 1 global interrupt */ + SAI2_IRQn = 75, /*!< Serial Audio Interface 2 global interrupt */ + SWPMI1_IRQn = 76, /*!< Serial Wire Interface 1 global interrupt */ + TSC_IRQn = 77, /*!< Touch Sense Controller global interrupt */ + LCD_IRQn = 78, /*!< LCD global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81 /*!< FPU global interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32l4xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x01C */ + __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x02C */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x044 */ + uint32_t RESERVED4; /*!< Reserved, 0x048 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED; /*!< Reserved, ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x308 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t CR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t ISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t ICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t JCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t JDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t RDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t AWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t AWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t AWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t AWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t EXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t EXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t CNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t AWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ +} DFSDM_Channel_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU APB1 freeze register 1, Address offset: 0x08 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU APB1 freeze register 2, Address offset: 0x0C */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x10 */ +} DBGMCU_TypeDef; + + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CSELR; /*!< DMA option register, Address offset: 0x00 */ +} DMA_request_TypeDef; + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x00 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x04 */ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x08 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x0C */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x10 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x20 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x24 */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x28 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x2C */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x30 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x34 */ +} EXTI_TypeDef; + + +/** + * @brief Firewall + */ + +typedef struct +{ + __IO uint32_t CSSA; /*!< Code Segment Start Address register, Address offset: 0x00 */ + __IO uint32_t CSL; /*!< Code Segment Length register, Address offset: 0x04 */ + __IO uint32_t NVDSSA; /*!< NON volatile data Segment Start Address register, Address offset: 0x08 */ + __IO uint32_t NVDSL; /*!< NON volatile data Segment Length register, Address offset: 0x0C */ + __IO uint32_t VDSSA ; /*!< Volatile data Segment Start Address register, Address offset: 0x10 */ + __IO uint32_t VDSL ; /*!< Volatile data Segment Length register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t CR ; /*!< Configuration register, Address offset: 0x20 */ +} FIREWALL_TypeDef; + + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t PDKEYR; /*!< FLASH power down key register, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH option register, Address offset: 0x20 */ + __IO uint32_t PCROP1SR; /*!< FLASH bank1 PCROP start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1ER; /*!< FLASH bank1 PCROP end address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH bank1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH bank1 WRP area B address register, Address offset: 0x30 */ + uint32_t RESERVED2[4]; /*!< Reserved2, Address offset: 0x34 */ + __IO uint32_t PCROP2SR; /*!< FLASH bank2 PCROP start address register, Address offset: 0x44 */ + __IO uint32_t PCROP2ER; /*!< FLASH bank2 PCROP end address register, Address offset: 0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH bank2 WRP area B address register, Address offset: 0x50 */ +} FLASH_TypeDef; + + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ + __IO uint32_t ASCR; /*!< GPIO analog switch control register, Address offset: 0x2C */ + +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LCD + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ + __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ + __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ +} LCD_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + + +/** + * @brief Operational Amplifier (OPAMP) + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ + __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ + __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ +} OPAMP_TypeDef; + + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR power control register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR power status register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR power status reset register, Address offset: 0x18 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< Pull_up control register of portA, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< Pull_Down control register of portA, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< Pull_up control register of portB, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< Pull_Down control register of portB, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< Pull_up control register of portC, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< Pull_Down control register of portC, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< Pull_up control register of portD, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< Pull_Down control register of portD, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< Pull_up control register of portE, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< Pull_Down control register of portE, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< Pull_up control register of portF, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< Pull_Down control register of portF, Address offset: 0x4C */ + __IO uint32_t PUCRG; /*!< Pull_up control register of portG, Address offset: 0x50 */ + __IO uint32_t PDCRG; /*!< Pull_Down control register of portG, Address offset: 0x54 */ + __IO uint32_t PUCRH; /*!< Pull_up control register of portH, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< Pull_Down control register of portH, Address offset: 0x5C */ +} PWR_TypeDef; + + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration register, Address offset: 0x0C */ + __IO uint32_t PLLSAI1CFGR; /*!< RCC PLL SAI1 Configuration Register, Address offset: 0x10 */ + __IO uint32_t PLLSAI2CFGR; /*!< RCC PLL SAI2 Configuration Register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x30 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC LowSpeed APB1 macrocells resets Low Word, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC LowSpeed APB1 macrocells resets High Word, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC High Speed APB macrocells resets, Address offset: 0x40 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock enable register, Address offset: 0x50 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC LowSpeed APB1 macrocells clock enables Low Word, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC LowSpeed APB1 macrocells clock enables High Word, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC High Speed APB macrocells clock enabled, Address offset: 0x60 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 macrocells clocks enables in sleep mode, Address offset: 0x60 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 macrocells clock enables in sleep mode, Address offset: 0x64 */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 macrocells clock enables in sleep mode, Address offset: 0x70 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC LowSpeed APB1 macrocells clock enables in sleep mode Low Word, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC LowSpeed APB1 macrocells clock enables in sleep mode High Word, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC High Speed APB macrocells clock enabled in sleep mode, Address offset: 0x80 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC IPs Clocks Configuration Register, Address offset: 0x88 */ + __IO uint32_t RESERVED7; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Vswitch Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x94 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + + +/** + * @brief Secure digital input/output Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMC clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */ +} SPI_TypeDef; + + +/** + * @brief Single Wire Protocol Master Interface SPWMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< SWPMI Configuration/Control register, Address offset: 0x00 */ + __IO uint32_t BRR; /*!< SWPMI bitrate register, Address offset: 0x04 */ + uint32_t RESERVED1; /*!< Reserved, 0x08 */ + __IO uint32_t ISR; /*!< SWPMI Interrupt and Status register, Address offset: 0x0C */ + __IO uint32_t ICR; /*!< SWPMI Interrupt Flag Clear register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< SWPMI Interrupt Enable register, Address offset: 0x14 */ + __IO uint32_t RFL; /*!< SWPMI Receive Frame Length register, Address offset: 0x18 */ + __IO uint32_t TDR; /*!< SWPMI Transmit data register, Address offset: 0x1C */ + __IO uint32_t RDR; /*!< SWPMI Receive data register, Address offset: 0x20 */ + __IO uint32_t OR; /*!< SWPMI Option register, Address offset: 0x24 */ +} SWPMI_TypeDef; + + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR; /*!< SYSCFG SRAM2 write protection register, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ +} SYSCFG_TypeDef; + + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register 1, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t OR2; /*!< TIM option register 2, Address offset: 0x60 */ + __IO uint32_t OR3; /*!< TIM option register 3, Address offset: 0x64 */ +} TIM_TypeDef; + + +/** + * @brief Touch Sensing Controller (TSC) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */ +} TSC_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + uint16_t RESERVED2; /*!< Reserved, 0x12 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint16_t RQR; /*!< USART Request register, Address offset: 0x18 */ + uint16_t RESERVED3; /*!< Reserved, 0x1A */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + uint16_t RESERVED4; /*!< Reserved, 0x26 */ + __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + uint16_t RESERVED5; /*!< Reserved, 0x2A */ +} USART_TypeDef; + + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h*/ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h*/ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h*/ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch*/ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h*/ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h*/ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h*/ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch*/ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h*/ + __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register 024h*/ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h*/ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch*/ + uint32_t Reserved30[2]; /* Reserved 030h*/ + __IO uint32_t GCCFG; /* General Purpose IO Register 038h*/ + __IO uint32_t CID; /* User ID Register 03Ch*/ + uint32_t Reserved5[3]; /* Reserved 040h-048h*/ + __IO uint32_t GHWCFG3; /* User HW config3 04Ch*/ + uint32_t Reserved6; /* Reserved 050h*/ + __IO uint32_t GLPMCFG; /* LPM Register 054h*/ + __IO uint32_t GPWRDN; /* Power Down Register 058h*/ + __IO uint32_t GDFIFOCFG; /* DFIFO Software Config Register 05Ch*/ + __IO uint32_t GADPCTL; /* ADP Timer, Control and Status Register 60Ch*/ + uint32_t Reserved43[39]; /* Reserved 058h-0FFh*/ + __IO uint32_t HPTXFSIZ; /* Host Periodic Tx FIFO Size Reg 100h*/ + __IO uint32_t DIEPTXF[0x0F]; /* dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /* dev Configuration Register 800h*/ + __IO uint32_t DCTL; /* dev Control Register 804h*/ + __IO uint32_t DSTS; /* dev Status Register (RO) 808h*/ + uint32_t Reserved0C; /* Reserved 80Ch*/ + __IO uint32_t DIEPMSK; /* dev IN Endpoint Mask 810h*/ + __IO uint32_t DOEPMSK; /* dev OUT Endpoint Mask 814h*/ + __IO uint32_t DAINT; /* dev All Endpoints Itr Reg 818h*/ + __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask 81Ch*/ + uint32_t Reserved20; /* Reserved 820h*/ + uint32_t Reserved9; /* Reserved 824h*/ + __IO uint32_t DVBUSDIS; /* dev VBUS discharge Register 828h*/ + __IO uint32_t DVBUSPULSE; /* dev VBUS Pulse Register 82Ch*/ + __IO uint32_t DTHRCTL; /* dev thr 830h*/ + __IO uint32_t DIEPEMPMSK; /* dev empty msk 834h*/ + __IO uint32_t DEACHINT; /* dedicated EP interrupt 838h*/ + __IO uint32_t DEACHMSK; /* dedicated EP msk 83Ch*/ + uint32_t Reserved40; /* dedicated EP mask 840h*/ + __IO uint32_t DINEP1MSK; /* dedicated EP mask 844h*/ + uint32_t Reserved44[15]; /* Reserved 844-87Ch*/ + __IO uint32_t DOUTEP1MSK; /* dedicated EP msk 884h*/ +} USB_OTG_DeviceTypeDef; + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h*/ + __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ + __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ + __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ + uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/ + __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ + __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ + uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /* Host Configuration Register 400h*/ + __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/ + __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/ + uint32_t Reserved40C; /* Reserved 40Ch*/ + __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/ + __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/ + __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; + __IO uint32_t HCSPLT; + __IO uint32_t HCINT; + __IO uint32_t HCINTMSK; + __IO uint32_t HCTSIZ; + __IO uint32_t HCDMA; + uint32_t Reserved[2]; +} USB_OTG_HostChannelTypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address */ +#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(96 KB) base address*/ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address */ +#define FMC_BASE ((uint32_t)0x60000000) /*!< FMC base address */ +#define SRAM2_BASE ((uint32_t)0x10000000) /*!< SRAM2(32 KB) base address*/ +#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< FMC control registers base address */ +#define QSPI_R_BASE ((uint32_t)0xA0001000) /*!< QUADSPI control registers base address */ +#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(96 KB) base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ +#define SRAM2_BB_BASE ((uint32_t)0x12000000) /*!< SRAM2(32 KB) base address in the bit-band region */ + +/* Legacy defines */ +#define SRAM_BASE SRAM1_BASE +#define SRAM_BB_BASE SRAM1_BB_BASE + +#define SRAM1_SIZE_MAX ((uint32_t)0x00018000) /*!< maximum SRAM1 size (up to 96 KBytes) */ +#define SRAM2_SIZE ((uint32_t)0x00008000) /*!< SRAM2 size (32 KBytes) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000) + +#define FMC_BANK1 FMC_BASE +#define FMC_BANK1_1 FMC_BANK1 +#define FMC_BANK1_2 (FMC_BANK1 + 0x04000000) +#define FMC_BANK1_3 (FMC_BANK1 + 0x08000000) +#define FMC_BANK1_4 (FMC_BANK1 + 0x0C000000) +#define FMC_BANK3 (FMC_BASE + 0x20000000) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define LCD_BASE (APB1PERIPH_BASE + 0x2400) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x7C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define DAC1_BASE (APB1PERIPH_BASE + 0x7400) +#define OPAMP_BASE (APB1PERIPH_BASE + 0x7800) +#define OPAMP1_BASE (APB1PERIPH_BASE + 0x7800) +#define OPAMP2_BASE (APB1PERIPH_BASE + 0x7810) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x8000) +#define SWPMI1_BASE (APB1PERIPH_BASE + 0x8800) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x9400) + + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000) +#define VREFBUF_BASE (APB2PERIPH_BASE + 0x0030) +#define COMP1_BASE (APB2PERIPH_BASE + 0x0200) +#define COMP2_BASE (APB2PERIPH_BASE + 0x0204) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define FIREWALL_BASE (APB2PERIPH_BASE + 0x1C00) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5400) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5800) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024) +#define DFSDM_BASE (APB2PERIPH_BASE + 0x6000) +#define DFSDM_Channel0_BASE (DFSDM_BASE + 0x00) +#define DFSDM_Channel1_BASE (DFSDM_BASE + 0x20) +#define DFSDM_Channel2_BASE (DFSDM_BASE + 0x40) +#define DFSDM_Channel3_BASE (DFSDM_BASE + 0x60) +#define DFSDM_Channel4_BASE (DFSDM_BASE + 0x80) +#define DFSDM_Channel5_BASE (DFSDM_BASE + 0xA0) +#define DFSDM_Channel6_BASE (DFSDM_BASE + 0xC0) +#define DFSDM_Channel7_BASE (DFSDM_BASE + 0xE0) +#define DFSDM_Filter0_BASE (DFSDM_BASE + 0x100) +#define DFSDM_Filter1_BASE (DFSDM_BASE + 0x180) +#define DFSDM_Filter2_BASE (DFSDM_BASE + 0x200) +#define DFSDM_Filter3_BASE (DFSDM_BASE + 0x280) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x0400) +#define RCC_BASE (AHB1PERIPH_BASE + 0x1000) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x2000) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000) +#define TSC_BASE (AHB1PERIPH_BASE + 0x4000) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x0008) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x001C) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x0030) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x0044) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x0058) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x006C) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080) +#define DMA1_CSELR_BASE (DMA1_BASE + 0x00A8) + + +#define DMA2_Channel1_BASE (DMA2_BASE + 0x0008) +#define DMA2_Channel2_BASE (DMA2_BASE + 0x001C) +#define DMA2_Channel3_BASE (DMA2_BASE + 0x0030) +#define DMA2_Channel4_BASE (DMA2_BASE + 0x0044) +#define DMA2_Channel5_BASE (DMA2_BASE + 0x0058) +#define DMA2_Channel6_BASE (DMA2_BASE + 0x006C) +#define DMA2_Channel7_BASE (DMA2_BASE + 0x0080) +#define DMA2_CSELR_BASE (DMA2_BASE + 0x00A8) + + +/*!< AHB2 peripherals */ +#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000) +#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400) +#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800) +#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00) +#define GPIOE_BASE (AHB2PERIPH_BASE + 0x1000) +#define GPIOF_BASE (AHB2PERIPH_BASE + 0x1400) +#define GPIOG_BASE (AHB2PERIPH_BASE + 0x1800) +#define GPIOH_BASE (AHB2PERIPH_BASE + 0x1C00) + +#define USBOTG_BASE (AHB2PERIPH_BASE + 0x08000000) + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000) +#define ADC2_BASE (AHB2PERIPH_BASE + 0x08040100) +#define ADC3_BASE (AHB2PERIPH_BASE + 0x08040200) +#define ADC123_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300) + +#define RNG_BASE (AHB2PERIPH_BASE + 0x08060800) + +/*!< FMC Banks registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) +#define FMC_Bank2_R_BASE (FMC_R_BASE + 0x0060) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080) +#define FMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE ((uint32_t )0xE0042000) + +/*!< USB registers base address */ +#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000) + +#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000) +#define USB_OTG_DEVICE_BASE ((uint32_t )0x800) +#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900) +#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00) +#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20) +#define USB_OTG_HOST_BASE ((uint32_t )0x400) +#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440) +#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500) +#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20) +#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00) +#define USB_OTG_FIFO_BASE ((uint32_t )0x1000) +#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000) + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define LCD ((LCD_TypeDef *) LCD_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define CAN ((CAN_TypeDef *) CAN1_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC1_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE) +#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define SWPMI1 ((SWPMI_TypeDef *) SWPMI1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FIREWALL ((FIREWALL_TypeDef *) FIREWALL_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define DFSDM_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM_Channel0_BASE) +#define DFSDM_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM_Channel1_BASE) +#define DFSDM_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM_Channel2_BASE) +#define DFSDM_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM_Channel3_BASE) +#define DFSDM_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM_Channel4_BASE) +#define DFSDM_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM_Channel5_BASE) +#define DFSDM_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM_Channel6_BASE) +#define DFSDM_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM_Channel7_BASE) +#define DFSDM_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM_Filter0_BASE) +#define DFSDM_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM_Filter1_BASE) +#define DFSDM_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM_Filter2_BASE) +#define DFSDM_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM_Filter3_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA1_CSELR ((DMA_request_TypeDef *) DMA1_CSELR_BASE) + + +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE) +#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE) +#define DMA2_CSELR ((DMA_request_TypeDef *) DMA2_CSELR_BASE) + + +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) + +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register ********************/ +#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) flag */ +#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling flag */ +#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion flag */ +#define ADC_ISR_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< ADC overrun flag */ +#define ADC_ISR_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion flag */ +#define ADC_ISR_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions flag */ +#define ADC_ISR_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 flag */ +#define ADC_ISR_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 flag */ +#define ADC_ISR_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 flag */ +#define ADC_ISR_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow flag */ + +/******************** Bit definition for ADC_IER register ********************/ +#define ADC_IER_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) interrupt source */ +#define ADC_IER_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling interrupt source */ +#define ADC_IER_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion interrupt source */ +#define ADC_IER_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions interrupt source */ +#define ADC_IER_OVR ((uint32_t)0x00000010) /*!< ADC overrun interrupt source */ +#define ADC_IER_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion interrupt source */ +#define ADC_IER_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions interrupt source */ +#define ADC_IER_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 interrupt source */ +#define ADC_IER_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 interrupt source */ +#define ADC_IER_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 interrupt source */ +#define ADC_IER_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow interrupt source */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC Enable control */ +#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC Disable command */ +#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC Start of Regular conversion */ +#define ADC_CR_JADSTART ((uint32_t)0x00000008) /*!< ADC Start of injected conversion */ +#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC Stop of Regular conversion */ +#define ADC_CR_JADSTP ((uint32_t)0x00000020) /*!< ADC Stop of injected conversion */ +#define ADC_CR_ADVREGEN ((uint32_t)0x10000000) /*!< ADC Voltage regulator Enable */ +#define ADC_CR_DEEPPWD ((uint32_t)0x20000000) /*!< ADC Deep power down Enable */ +#define ADC_CR_ADCALDIF ((uint32_t)0x40000000) /*!< ADC Differential Mode for calibration */ +#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC Calibration */ + +/******************** Bit definition for ADC_CFGR register ********************/ +#define ADC_CFGR_DMAEN ((uint32_t)0x00000001) /*!< ADC DMA Enable */ +#define ADC_CFGR_DMACFG ((uint32_t)0x00000002) /*!< ADC DMA configuration */ + +#define ADC_CFGR_RES ((uint32_t)0x00000018) /*!< ADC Data resolution */ +#define ADC_CFGR_RES_0 ((uint32_t)0x00000008) /*!< ADC RES bit 0 */ +#define ADC_CFGR_RES_1 ((uint32_t)0x00000010) /*!< ADC RES bit 1 */ + +#define ADC_CFGR_ALIGN ((uint32_t)0x00000020) /*!< ADC Data Alignement */ + +#define ADC_CFGR_EXTSEL ((uint32_t)0x000003C0) /*!< ADC External trigger selection for regular group */ +#define ADC_CFGR_EXTSEL_0 ((uint32_t)0x00000040) /*!< ADC EXTSEL bit 0 */ +#define ADC_CFGR_EXTSEL_1 ((uint32_t)0x00000080) /*!< ADC EXTSEL bit 1 */ +#define ADC_CFGR_EXTSEL_2 ((uint32_t)0x00000100) /*!< ADC EXTSEL bit 2 */ +#define ADC_CFGR_EXTSEL_3 ((uint32_t)0x00000200) /*!< ADC EXTSEL bit 3 */ + +#define ADC_CFGR_EXTEN ((uint32_t)0x00000C00) /*!< ADC External trigger enable and polarity selection for regular channels */ +#define ADC_CFGR_EXTEN_0 ((uint32_t)0x00000400) /*!< ADC EXTEN bit 0 */ +#define ADC_CFGR_EXTEN_1 ((uint32_t)0x00000800) /*!< ADC EXTEN bit 1 */ + +#define ADC_CFGR_OVRMOD ((uint32_t)0x00001000) /*!< ADC overrun mode */ +#define ADC_CFGR_CONT ((uint32_t)0x00002000) /*!< ADC Single/continuous conversion mode for regular conversion */ +#define ADC_CFGR_AUTDLY ((uint32_t)0x00004000) /*!< ADC Delayed conversion mode */ + +#define ADC_CFGR_DISCEN ((uint32_t)0x00010000) /*!< ADC Discontinuous mode for regular channels */ + +#define ADC_CFGR_DISCNUM ((uint32_t)0x000E0000) /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 ((uint32_t)0x00020000) /*!< ADC DISCNUM bit 0 */ +#define ADC_CFGR_DISCNUM_1 ((uint32_t)0x00040000) /*!< ADC DISCNUM bit 1 */ +#define ADC_CFGR_DISCNUM_2 ((uint32_t)0x00080000) /*!< ADC DISCNUM bit 2 */ + +#define ADC_CFGR_JDISCEN ((uint32_t)0x00100000) /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM ((uint32_t)0x00200000) /*!< ADC JSQR Queue mode */ +#define ADC_CFGR_AWD1SGL ((uint32_t)0x00400000) /*!< Enable the watchdog 1 on a single channel or on all channels */ +#define ADC_CFGR_AWD1EN ((uint32_t)0x00800000) /*!< ADC Analog watchdog 1 enable on regular Channels */ +#define ADC_CFGR_JAWD1EN ((uint32_t)0x01000000) /*!< ADC Analog watchdog 1 enable on injected Channels */ +#define ADC_CFGR_JAUTO ((uint32_t)0x02000000) /*!< ADC Automatic injected group conversion */ + +#define ADC_CFGR_AWD1CH ((uint32_t)0x7C000000) /*!< ADC Analog watchdog 1 Channel selection */ +#define ADC_CFGR_AWD1CH_0 ((uint32_t)0x04000000) /*!< ADC AWD1CH bit 0 */ +#define ADC_CFGR_AWD1CH_1 ((uint32_t)0x08000000) /*!< ADC AWD1CH bit 1 */ +#define ADC_CFGR_AWD1CH_2 ((uint32_t)0x10000000) /*!< ADC AWD1CH bit 2 */ +#define ADC_CFGR_AWD1CH_3 ((uint32_t)0x20000000) /*!< ADC AWD1CH bit 3 */ +#define ADC_CFGR_AWD1CH_4 ((uint32_t)0x40000000) /*!< ADC AWD1CH bit 4 */ + +#define ADC_CFGR_JQDIS ((uint32_t)0x80000000) /*!< ADC Injected queue disable */ + +/******************** Bit definition for ADC_CFGR2 register ********************/ +#define ADC_CFGR2_ROVSE ((uint32_t)0x00000001) /*!< ADC Regular group oversampler enable */ +#define ADC_CFGR2_JOVSE ((uint32_t)0x00000002) /*!< ADC Injected group oversampler enable */ + +#define ADC_CFGR2_OVSR ((uint32_t)0x0000001C) /*!< ADC Regular group oversampler enable */ +#define ADC_CFGR2_OVSR_0 ((uint32_t)0x00000004) /*!< ADC OVSR bit 0 */ +#define ADC_CFGR2_OVSR_1 ((uint32_t)0x00000008) /*!< ADC OVSR bit 1 */ +#define ADC_CFGR2_OVSR_2 ((uint32_t)0x00000010) /*!< ADC OVSR bit 2 */ + +#define ADC_CFGR2_OVSS ((uint32_t)0x000001E0) /*!< ADC Regular Oversampling shift */ +#define ADC_CFGR2_OVSS_0 ((uint32_t)0x00000020) /*!< ADC OVSS bit 0 */ +#define ADC_CFGR2_OVSS_1 ((uint32_t)0x00000040) /*!< ADC OVSS bit 1 */ +#define ADC_CFGR2_OVSS_2 ((uint32_t)0x00000080) /*!< ADC OVSS bit 2 */ +#define ADC_CFGR2_OVSS_3 ((uint32_t)0x00000100) /*!< ADC OVSS bit 3 */ + +#define ADC_CFGR2_TROVS ((uint32_t)0x00000200) /*!< ADC Triggered regular Oversampling */ +#define ADC_CFGR2_ROVSM ((uint32_t)0x00000400) /*!< ADC Regular oversampling mode */ + +/******************** Bit definition for ADC_SMPR1 register ********************/ +#define ADC_SMPR1_SMP0 ((uint32_t)0x00000007) /*!< ADC Channel 0 Sampling time selection */ +#define ADC_SMPR1_SMP0_0 ((uint32_t)0x00000001) /*!< ADC SMP0 bit 0 */ +#define ADC_SMPR1_SMP0_1 ((uint32_t)0x00000002) /*!< ADC SMP0 bit 1 */ +#define ADC_SMPR1_SMP0_2 ((uint32_t)0x00000004) /*!< ADC SMP0 bit 2 */ + +#define ADC_SMPR1_SMP1 ((uint32_t)0x00000038) /*!< ADC Channel 1 Sampling time selection */ +#define ADC_SMPR1_SMP1_0 ((uint32_t)0x00000008) /*!< ADC SMP1 bit 0 */ +#define ADC_SMPR1_SMP1_1 ((uint32_t)0x00000010) /*!< ADC SMP1 bit 1 */ +#define ADC_SMPR1_SMP1_2 ((uint32_t)0x00000020) /*!< ADC SMP1 bit 2 */ + +#define ADC_SMPR1_SMP2 ((uint32_t)0x000001C0) /*!< ADC Channel 2 Sampling time selection */ +#define ADC_SMPR1_SMP2_0 ((uint32_t)0x00000040) /*!< ADC SMP2 bit 0 */ +#define ADC_SMPR1_SMP2_1 ((uint32_t)0x00000080) /*!< ADC SMP2 bit 1 */ +#define ADC_SMPR1_SMP2_2 ((uint32_t)0x00000100) /*!< ADC SMP2 bit 2 */ + +#define ADC_SMPR1_SMP3 ((uint32_t)0x00000E00) /*!< ADC Channel 3 Sampling time selection */ +#define ADC_SMPR1_SMP3_0 ((uint32_t)0x00000200) /*!< ADC SMP3 bit 0 */ +#define ADC_SMPR1_SMP3_1 ((uint32_t)0x00000400) /*!< ADC SMP3 bit 1 */ +#define ADC_SMPR1_SMP3_2 ((uint32_t)0x00000800) /*!< ADC SMP3 bit 2 */ + +#define ADC_SMPR1_SMP4 ((uint32_t)0x00007000) /*!< ADC Channel 4 Sampling time selection */ +#define ADC_SMPR1_SMP4_0 ((uint32_t)0x00001000) /*!< ADC SMP4 bit 0 */ +#define ADC_SMPR1_SMP4_1 ((uint32_t)0x00002000) /*!< ADC SMP4 bit 1 */ +#define ADC_SMPR1_SMP4_2 ((uint32_t)0x00004000) /*!< ADC SMP4 bit 2 */ + +#define ADC_SMPR1_SMP5 ((uint32_t)0x00038000) /*!< ADC Channel 5 Sampling time selection */ +#define ADC_SMPR1_SMP5_0 ((uint32_t)0x00008000) /*!< ADC SMP5 bit 0 */ +#define ADC_SMPR1_SMP5_1 ((uint32_t)0x00010000) /*!< ADC SMP5 bit 1 */ +#define ADC_SMPR1_SMP5_2 ((uint32_t)0x00020000) /*!< ADC SMP5 bit 2 */ + +#define ADC_SMPR1_SMP6 ((uint32_t)0x001C0000) /*!< ADC Channel 6 Sampling time selection */ +#define ADC_SMPR1_SMP6_0 ((uint32_t)0x00040000) /*!< ADC SMP6 bit 0 */ +#define ADC_SMPR1_SMP6_1 ((uint32_t)0x00080000) /*!< ADC SMP6 bit 1 */ +#define ADC_SMPR1_SMP6_2 ((uint32_t)0x00100000) /*!< ADC SMP6 bit 2 */ + +#define ADC_SMPR1_SMP7 ((uint32_t)0x00E00000) /*!< ADC Channel 7 Sampling time selection */ +#define ADC_SMPR1_SMP7_0 ((uint32_t)0x00200000) /*!< ADC SMP7 bit 0 */ +#define ADC_SMPR1_SMP7_1 ((uint32_t)0x00400000) /*!< ADC SMP7 bit 1 */ +#define ADC_SMPR1_SMP7_2 ((uint32_t)0x00800000) /*!< ADC SMP7 bit 2 */ + +#define ADC_SMPR1_SMP8 ((uint32_t)0x07000000) /*!< ADC Channel 8 Sampling time selection */ +#define ADC_SMPR1_SMP8_0 ((uint32_t)0x01000000) /*!< ADC SMP8 bit 0 */ +#define ADC_SMPR1_SMP8_1 ((uint32_t)0x02000000) /*!< ADC SMP8 bit 1 */ +#define ADC_SMPR1_SMP8_2 ((uint32_t)0x04000000) /*!< ADC SMP8 bit 2 */ + +#define ADC_SMPR1_SMP9 ((uint32_t)0x38000000) /*!< ADC Channel 9 Sampling time selection */ +#define ADC_SMPR1_SMP9_0 ((uint32_t)0x08000000) /*!< ADC SMP9 bit 0 */ +#define ADC_SMPR1_SMP9_1 ((uint32_t)0x10000000) /*!< ADC SMP9 bit 1 */ +#define ADC_SMPR1_SMP9_2 ((uint32_t)0x20000000) /*!< ADC SMP9 bit 2 */ + +/******************** Bit definition for ADC_SMPR2 register ********************/ +#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< ADC Channel 10 Sampling time selection */ +#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< ADC SMP10 bit 0 */ +#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< ADC SMP10 bit 1 */ +#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< ADC SMP10 bit 2 */ + +#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< ADC Channel 11 Sampling time selection */ +#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< ADC SMP11 bit 0 */ +#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< ADC SMP11 bit 1 */ +#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< ADC SMP11 bit 2 */ + +#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< ADC Channel 12 Sampling time selection */ +#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< ADC SMP12 bit 0 */ +#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< ADC SMP12 bit 1 */ +#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< ADC SMP12 bit 2 */ + +#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< ADC Channel 13 Sampling time selection */ +#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< ADC SMP13 bit 0 */ +#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< ADC SMP13 bit 1 */ +#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< ADC SMP13 bit 2 */ + +#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< ADC Channel 14 Sampling time selection */ +#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< ADC SMP14 bit 0 */ +#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< ADC SMP14 bit 1 */ +#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< ADC SMP14 bit 2 */ + +#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< ADC Channel 15 Sampling time selection */ +#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< ADC SMP15 bit 0 */ +#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< ADC SMP15 bit 1 */ +#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< ADC SMP15 bit 2 */ + +#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< ADC Channel 16 Sampling time selection */ +#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< ADC SMP16 bit 0 */ +#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< ADC SMP16 bit 1 */ +#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< ADC SMP16 bit 2 */ + +#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< ADC Channel 17 Sampling time selection */ +#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< ADC SMP17 bit 0 */ +#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< ADC SMP17 bit 1 */ +#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< ADC SMP17 bit 2 */ + +#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< ADC Channel 18 Sampling time selection */ +#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< ADC SMP18 bit 0 */ +#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< ADC SMP18 bit 1 */ +#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< ADC SMP18 bit 2 */ + +/******************** Bit definition for ADC_TR1 register ********************/ +#define ADC_TR1_LT1 ((uint32_t)0x00000FFF) /*!< ADC Analog watchdog 1 lower threshold */ +#define ADC_TR1_LT1_0 ((uint32_t)0x00000001) /*!< ADC LT1 bit 0 */ +#define ADC_TR1_LT1_1 ((uint32_t)0x00000002) /*!< ADC LT1 bit 1 */ +#define ADC_TR1_LT1_2 ((uint32_t)0x00000004) /*!< ADC LT1 bit 2 */ +#define ADC_TR1_LT1_3 ((uint32_t)0x00000008) /*!< ADC LT1 bit 3 */ +#define ADC_TR1_LT1_4 ((uint32_t)0x00000010) /*!< ADC LT1 bit 4 */ +#define ADC_TR1_LT1_5 ((uint32_t)0x00000020) /*!< ADC LT1 bit 5 */ +#define ADC_TR1_LT1_6 ((uint32_t)0x00000040) /*!< ADC LT1 bit 6 */ +#define ADC_TR1_LT1_7 ((uint32_t)0x00000080) /*!< ADC LT1 bit 7 */ +#define ADC_TR1_LT1_8 ((uint32_t)0x00000100) /*!< ADC LT1 bit 8 */ +#define ADC_TR1_LT1_9 ((uint32_t)0x00000200) /*!< ADC LT1 bit 9 */ +#define ADC_TR1_LT1_10 ((uint32_t)0x00000400) /*!< ADC LT1 bit 10 */ +#define ADC_TR1_LT1_11 ((uint32_t)0x00000800) /*!< ADC LT1 bit 11 */ + +#define ADC_TR1_HT1 ((uint32_t)0x0FFF0000) /*!< ADC Analog watchdog 1 higher threshold */ +#define ADC_TR1_HT1_0 ((uint32_t)0x00010000) /*!< ADC HT1 bit 0 */ +#define ADC_TR1_HT1_1 ((uint32_t)0x00020000) /*!< ADC HT1 bit 1 */ +#define ADC_TR1_HT1_2 ((uint32_t)0x00040000) /*!< ADC HT1 bit 2 */ +#define ADC_TR1_HT1_3 ((uint32_t)0x00080000) /*!< ADC HT1 bit 3 */ +#define ADC_TR1_HT1_4 ((uint32_t)0x00100000) /*!< ADC HT1 bit 4 */ +#define ADC_TR1_HT1_5 ((uint32_t)0x00200000) /*!< ADC HT1 bit 5 */ +#define ADC_TR1_HT1_6 ((uint32_t)0x00400000) /*!< ADC HT1 bit 6 */ +#define ADC_TR1_HT1_7 ((uint32_t)0x00800000) /*!< ADC HT1 bit 7 */ +#define ADC_TR1_HT1_8 ((uint32_t)0x01000000) /*!< ADC HT1 bit 8 */ +#define ADC_TR1_HT1_9 ((uint32_t)0x02000000) /*!< ADC HT1 bit 9 */ +#define ADC_TR1_HT1_10 ((uint32_t)0x04000000) /*!< ADC HT1 bit 10 */ +#define ADC_TR1_HT1_11 ((uint32_t)0x08000000) /*!< ADC HT1 bit 11 */ + +/******************** Bit definition for ADC_TR2 register ********************/ +#define ADC_TR2_LT2 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 2 lower threshold */ +#define ADC_TR2_LT2_0 ((uint32_t)0x00000001) /*!< ADC LT2 bit 0 */ +#define ADC_TR2_LT2_1 ((uint32_t)0x00000002) /*!< ADC LT2 bit 1 */ +#define ADC_TR2_LT2_2 ((uint32_t)0x00000004) /*!< ADC LT2 bit 2 */ +#define ADC_TR2_LT2_3 ((uint32_t)0x00000008) /*!< ADC LT2 bit 3 */ +#define ADC_TR2_LT2_4 ((uint32_t)0x00000010) /*!< ADC LT2 bit 4 */ +#define ADC_TR2_LT2_5 ((uint32_t)0x00000020) /*!< ADC LT2 bit 5 */ +#define ADC_TR2_LT2_6 ((uint32_t)0x00000040) /*!< ADC LT2 bit 6 */ +#define ADC_TR2_LT2_7 ((uint32_t)0x00000080) /*!< ADC LT2 bit 7 */ + +#define ADC_TR2_HT2 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 2 higher threshold */ +#define ADC_TR2_HT2_0 ((uint32_t)0x00010000) /*!< ADC HT2 bit 0 */ +#define ADC_TR2_HT2_1 ((uint32_t)0x00020000) /*!< ADC HT2 bit 1 */ +#define ADC_TR2_HT2_2 ((uint32_t)0x00040000) /*!< ADC HT2 bit 2 */ +#define ADC_TR2_HT2_3 ((uint32_t)0x00080000) /*!< ADC HT2 bit 3 */ +#define ADC_TR2_HT2_4 ((uint32_t)0x00100000) /*!< ADC HT2 bit 4 */ +#define ADC_TR2_HT2_5 ((uint32_t)0x00200000) /*!< ADC HT2 bit 5 */ +#define ADC_TR2_HT2_6 ((uint32_t)0x00400000) /*!< ADC HT2 bit 6 */ +#define ADC_TR2_HT2_7 ((uint32_t)0x00800000) /*!< ADC HT2 bit 7 */ + +/******************** Bit definition for ADC_TR3 register ********************/ +#define ADC_TR3_LT3 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 3 lower threshold */ +#define ADC_TR3_LT3_0 ((uint32_t)0x00000001) /*!< ADC LT3 bit 0 */ +#define ADC_TR3_LT3_1 ((uint32_t)0x00000002) /*!< ADC LT3 bit 1 */ +#define ADC_TR3_LT3_2 ((uint32_t)0x00000004) /*!< ADC LT3 bit 2 */ +#define ADC_TR3_LT3_3 ((uint32_t)0x00000008) /*!< ADC LT3 bit 3 */ +#define ADC_TR3_LT3_4 ((uint32_t)0x00000010) /*!< ADC LT3 bit 4 */ +#define ADC_TR3_LT3_5 ((uint32_t)0x00000020) /*!< ADC LT3 bit 5 */ +#define ADC_TR3_LT3_6 ((uint32_t)0x00000040) /*!< ADC LT3 bit 6 */ +#define ADC_TR3_LT3_7 ((uint32_t)0x00000080) /*!< ADC LT3 bit 7 */ + +#define ADC_TR3_HT3 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 3 higher threshold */ +#define ADC_TR3_HT3_0 ((uint32_t)0x00010000) /*!< ADC HT3 bit 0 */ +#define ADC_TR3_HT3_1 ((uint32_t)0x00020000) /*!< ADC HT3 bit 1 */ +#define ADC_TR3_HT3_2 ((uint32_t)0x00040000) /*!< ADC HT3 bit 2 */ +#define ADC_TR3_HT3_3 ((uint32_t)0x00080000) /*!< ADC HT3 bit 3 */ +#define ADC_TR3_HT3_4 ((uint32_t)0x00100000) /*!< ADC HT3 bit 4 */ +#define ADC_TR3_HT3_5 ((uint32_t)0x00200000) /*!< ADC HT3 bit 5 */ +#define ADC_TR3_HT3_6 ((uint32_t)0x00400000) /*!< ADC HT3 bit 6 */ +#define ADC_TR3_HT3_7 ((uint32_t)0x00800000) /*!< ADC HT3 bit 7 */ + +/******************** Bit definition for ADC_SQR1 register ********************/ +#define ADC_SQR1_L ((uint32_t)0x0000000F) /*!< ADC regular channel sequence lenght */ +#define ADC_SQR1_L_0 ((uint32_t)0x00000001) /*!< ADC L bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00000002) /*!< ADC L bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00000004) /*!< ADC L bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00000008) /*!< ADC L bit 3 */ + +#define ADC_SQR1_SQ1 ((uint32_t)0x000007C0) /*!< ADC 1st conversion in regular sequence */ +#define ADC_SQR1_SQ1_0 ((uint32_t)0x00000040) /*!< ADC SQ1 bit 0 */ +#define ADC_SQR1_SQ1_1 ((uint32_t)0x00000080) /*!< ADC SQ1 bit 1 */ +#define ADC_SQR1_SQ1_2 ((uint32_t)0x00000100) /*!< ADC SQ1 bit 2 */ +#define ADC_SQR1_SQ1_3 ((uint32_t)0x00000200) /*!< ADC SQ1 bit 3 */ +#define ADC_SQR1_SQ1_4 ((uint32_t)0x00000400) /*!< ADC SQ1 bit 4 */ + +#define ADC_SQR1_SQ2 ((uint32_t)0x0001F000) /*!< ADC 2nd conversion in regular sequence */ +#define ADC_SQR1_SQ2_0 ((uint32_t)0x00001000) /*!< ADC SQ2 bit 0 */ +#define ADC_SQR1_SQ2_1 ((uint32_t)0x00002000) /*!< ADC SQ2 bit 1 */ +#define ADC_SQR1_SQ2_2 ((uint32_t)0x00004000) /*!< ADC SQ2 bit 2 */ +#define ADC_SQR1_SQ2_3 ((uint32_t)0x00008000) /*!< ADC SQ2 bit 3 */ +#define ADC_SQR1_SQ2_4 ((uint32_t)0x00010000) /*!< ADC SQ2 bit 4 */ + +#define ADC_SQR1_SQ3 ((uint32_t)0x007C0000) /*!< ADC 3rd conversion in regular sequence */ +#define ADC_SQR1_SQ3_0 ((uint32_t)0x00040000) /*!< ADC SQ3 bit 0 */ +#define ADC_SQR1_SQ3_1 ((uint32_t)0x00080000) /*!< ADC SQ3 bit 1 */ +#define ADC_SQR1_SQ3_2 ((uint32_t)0x00100000) /*!< ADC SQ3 bit 2 */ +#define ADC_SQR1_SQ3_3 ((uint32_t)0x00200000) /*!< ADC SQ3 bit 3 */ +#define ADC_SQR1_SQ3_4 ((uint32_t)0x00400000) /*!< ADC SQ3 bit 4 */ + +#define ADC_SQR1_SQ4 ((uint32_t)0x1F000000) /*!< ADC 4th conversion in regular sequence */ +#define ADC_SQR1_SQ4_0 ((uint32_t)0x01000000) /*!< ADC SQ4 bit 0 */ +#define ADC_SQR1_SQ4_1 ((uint32_t)0x02000000) /*!< ADC SQ4 bit 1 */ +#define ADC_SQR1_SQ4_2 ((uint32_t)0x04000000) /*!< ADC SQ4 bit 2 */ +#define ADC_SQR1_SQ4_3 ((uint32_t)0x08000000) /*!< ADC SQ4 bit 3 */ +#define ADC_SQR1_SQ4_4 ((uint32_t)0x10000000) /*!< ADC SQ4 bit 4 */ + +/******************** Bit definition for ADC_SQR2 register ********************/ +#define ADC_SQR2_SQ5 ((uint32_t)0x0000001F) /*!< ADC 5th conversion in regular sequence */ +#define ADC_SQR2_SQ5_0 ((uint32_t)0x00000001) /*!< ADC SQ5 bit 0 */ +#define ADC_SQR2_SQ5_1 ((uint32_t)0x00000002) /*!< ADC SQ5 bit 1 */ +#define ADC_SQR2_SQ5_2 ((uint32_t)0x00000004) /*!< ADC SQ5 bit 2 */ +#define ADC_SQR2_SQ5_3 ((uint32_t)0x00000008) /*!< ADC SQ5 bit 3 */ +#define ADC_SQR2_SQ5_4 ((uint32_t)0x00000010) /*!< ADC SQ5 bit 4 */ + +#define ADC_SQR2_SQ6 ((uint32_t)0x000007C0) /*!< ADC 6th conversion in regular sequence */ +#define ADC_SQR2_SQ6_0 ((uint32_t)0x00000040) /*!< ADC SQ6 bit 0 */ +#define ADC_SQR2_SQ6_1 ((uint32_t)0x00000080) /*!< ADC SQ6 bit 1 */ +#define ADC_SQR2_SQ6_2 ((uint32_t)0x00000100) /*!< ADC SQ6 bit 2 */ +#define ADC_SQR2_SQ6_3 ((uint32_t)0x00000200) /*!< ADC SQ6 bit 3 */ +#define ADC_SQR2_SQ6_4 ((uint32_t)0x00000400) /*!< ADC SQ6 bit 4 */ + +#define ADC_SQR2_SQ7 ((uint32_t)0x0001F000) /*!< ADC 7th conversion in regular sequence */ +#define ADC_SQR2_SQ7_0 ((uint32_t)0x00001000) /*!< ADC SQ7 bit 0 */ +#define ADC_SQR2_SQ7_1 ((uint32_t)0x00002000) /*!< ADC SQ7 bit 1 */ +#define ADC_SQR2_SQ7_2 ((uint32_t)0x00004000) /*!< ADC SQ7 bit 2 */ +#define ADC_SQR2_SQ7_3 ((uint32_t)0x00008000) /*!< ADC SQ7 bit 3 */ +#define ADC_SQR2_SQ7_4 ((uint32_t)0x00010000) /*!< ADC SQ7 bit 4 */ + +#define ADC_SQR2_SQ8 ((uint32_t)0x007C0000) /*!< ADC 8th conversion in regular sequence */ +#define ADC_SQR2_SQ8_0 ((uint32_t)0x00040000) /*!< ADC SQ8 bit 0 */ +#define ADC_SQR2_SQ8_1 ((uint32_t)0x00080000) /*!< ADC SQ8 bit 1 */ +#define ADC_SQR2_SQ8_2 ((uint32_t)0x00100000) /*!< ADC SQ8 bit 2 */ +#define ADC_SQR2_SQ8_3 ((uint32_t)0x00200000) /*!< ADC SQ8 bit 3 */ +#define ADC_SQR2_SQ8_4 ((uint32_t)0x00400000) /*!< ADC SQ8 bit 4 */ + +#define ADC_SQR2_SQ9 ((uint32_t)0x1F000000) /*!< ADC 9th conversion in regular sequence */ +#define ADC_SQR2_SQ9_0 ((uint32_t)0x01000000) /*!< ADC SQ9 bit 0 */ +#define ADC_SQR2_SQ9_1 ((uint32_t)0x02000000) /*!< ADC SQ9 bit 1 */ +#define ADC_SQR2_SQ9_2 ((uint32_t)0x04000000) /*!< ADC SQ9 bit 2 */ +#define ADC_SQR2_SQ9_3 ((uint32_t)0x08000000) /*!< ADC SQ9 bit 3 */ +#define ADC_SQR2_SQ9_4 ((uint32_t)0x10000000) /*!< ADC SQ9 bit 4 */ + +/******************** Bit definition for ADC_SQR3 register ********************/ +#define ADC_SQR3_SQ10 ((uint32_t)0x0000001F) /*!< ADC 10th conversion in regular sequence */ +#define ADC_SQR3_SQ10_0 ((uint32_t)0x00000001) /*!< ADC SQ10 bit 0 */ +#define ADC_SQR3_SQ10_1 ((uint32_t)0x00000002) /*!< ADC SQ10 bit 1 */ +#define ADC_SQR3_SQ10_2 ((uint32_t)0x00000004) /*!< ADC SQ10 bit 2 */ +#define ADC_SQR3_SQ10_3 ((uint32_t)0x00000008) /*!< ADC SQ10 bit 3 */ +#define ADC_SQR3_SQ10_4 ((uint32_t)0x00000010) /*!< ADC SQ10 bit 4 */ + +#define ADC_SQR3_SQ11 ((uint32_t)0x000007C0) /*!< ADC 11th conversion in regular sequence */ +#define ADC_SQR3_SQ11_0 ((uint32_t)0x00000040) /*!< ADC SQ11 bit 0 */ +#define ADC_SQR3_SQ11_1 ((uint32_t)0x00000080) /*!< ADC SQ11 bit 1 */ +#define ADC_SQR3_SQ11_2 ((uint32_t)0x00000100) /*!< ADC SQ11 bit 2 */ +#define ADC_SQR3_SQ11_3 ((uint32_t)0x00000200) /*!< ADC SQ11 bit 3 */ +#define ADC_SQR3_SQ11_4 ((uint32_t)0x00000400) /*!< ADC SQ11 bit 4 */ + +#define ADC_SQR3_SQ12 ((uint32_t)0x0001F000) /*!< ADC 12th conversion in regular sequence */ +#define ADC_SQR3_SQ12_0 ((uint32_t)0x00001000) /*!< ADC SQ12 bit 0 */ +#define ADC_SQR3_SQ12_1 ((uint32_t)0x00002000) /*!< ADC SQ12 bit 1 */ +#define ADC_SQR3_SQ12_2 ((uint32_t)0x00004000) /*!< ADC SQ12 bit 2 */ +#define ADC_SQR3_SQ12_3 ((uint32_t)0x00008000) /*!< ADC SQ12 bit 3 */ +#define ADC_SQR3_SQ12_4 ((uint32_t)0x00010000) /*!< ADC SQ12 bit 4 */ + +#define ADC_SQR3_SQ13 ((uint32_t)0x007C0000) /*!< ADC 13th conversion in regular sequence */ +#define ADC_SQR3_SQ13_0 ((uint32_t)0x00040000) /*!< ADC SQ13 bit 0 */ +#define ADC_SQR3_SQ13_1 ((uint32_t)0x00080000) /*!< ADC SQ13 bit 1 */ +#define ADC_SQR3_SQ13_2 ((uint32_t)0x00100000) /*!< ADC SQ13 bit 2 */ +#define ADC_SQR3_SQ13_3 ((uint32_t)0x00200000) /*!< ADC SQ13 bit 3 */ +#define ADC_SQR3_SQ13_4 ((uint32_t)0x00400000) /*!< ADC SQ13 bit 4 */ + +#define ADC_SQR3_SQ14 ((uint32_t)0x1F000000) /*!< ADC 14th conversion in regular sequence */ +#define ADC_SQR3_SQ14_0 ((uint32_t)0x01000000) /*!< ADC SQ14 bit 0 */ +#define ADC_SQR3_SQ14_1 ((uint32_t)0x02000000) /*!< ADC SQ14 bit 1 */ +#define ADC_SQR3_SQ14_2 ((uint32_t)0x04000000) /*!< ADC SQ14 bit 2 */ +#define ADC_SQR3_SQ14_3 ((uint32_t)0x08000000) /*!< ADC SQ14 bit 3 */ +#define ADC_SQR3_SQ14_4 ((uint32_t)0x10000000) /*!< ADC SQ14 bit 4 */ + +/******************** Bit definition for ADC_SQR4 register ********************/ +#define ADC_SQR4_SQ15 ((uint32_t)0x0000001F) /*!< ADC 15th conversion in regular sequence */ +#define ADC_SQR4_SQ15_0 ((uint32_t)0x00000001) /*!< ADC SQ15 bit 0 */ +#define ADC_SQR4_SQ15_1 ((uint32_t)0x00000002) /*!< ADC SQ15 bit 1 */ +#define ADC_SQR4_SQ15_2 ((uint32_t)0x00000004) /*!< ADC SQ15 bit 2 */ +#define ADC_SQR4_SQ15_3 ((uint32_t)0x00000008) /*!< ADC SQ15 bit 3 */ +#define ADC_SQR4_SQ15_4 ((uint32_t)0x00000010) /*!< ADC SQ105 bit 4 */ + +#define ADC_SQR4_SQ16 ((uint32_t)0x000007C0) /*!< ADC 16th conversion in regular sequence */ +#define ADC_SQR4_SQ16_0 ((uint32_t)0x00000040) /*!< ADC SQ16 bit 0 */ +#define ADC_SQR4_SQ16_1 ((uint32_t)0x00000080) /*!< ADC SQ16 bit 1 */ +#define ADC_SQR4_SQ16_2 ((uint32_t)0x00000100) /*!< ADC SQ16 bit 2 */ +#define ADC_SQR4_SQ16_3 ((uint32_t)0x00000200) /*!< ADC SQ16 bit 3 */ +#define ADC_SQR4_SQ16_4 ((uint32_t)0x00000400) /*!< ADC SQ16 bit 4 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA ((uint32_t)0x0000FFFF) /*!< ADC regular Data converted */ +#define ADC_DR_RDATA_0 ((uint32_t)0x00000001) /*!< ADC RDATA bit 0 */ +#define ADC_DR_RDATA_1 ((uint32_t)0x00000002) /*!< ADC RDATA bit 1 */ +#define ADC_DR_RDATA_2 ((uint32_t)0x00000004) /*!< ADC RDATA bit 2 */ +#define ADC_DR_RDATA_3 ((uint32_t)0x00000008) /*!< ADC RDATA bit 3 */ +#define ADC_DR_RDATA_4 ((uint32_t)0x00000010) /*!< ADC RDATA bit 4 */ +#define ADC_DR_RDATA_5 ((uint32_t)0x00000020) /*!< ADC RDATA bit 5 */ +#define ADC_DR_RDATA_6 ((uint32_t)0x00000040) /*!< ADC RDATA bit 6 */ +#define ADC_DR_RDATA_7 ((uint32_t)0x00000080) /*!< ADC RDATA bit 7 */ +#define ADC_DR_RDATA_8 ((uint32_t)0x00000100) /*!< ADC RDATA bit 8 */ +#define ADC_DR_RDATA_9 ((uint32_t)0x00000200) /*!< ADC RDATA bit 9 */ +#define ADC_DR_RDATA_10 ((uint32_t)0x00000400) /*!< ADC RDATA bit 10 */ +#define ADC_DR_RDATA_11 ((uint32_t)0x00000800) /*!< ADC RDATA bit 11 */ +#define ADC_DR_RDATA_12 ((uint32_t)0x00001000) /*!< ADC RDATA bit 12 */ +#define ADC_DR_RDATA_13 ((uint32_t)0x00002000) /*!< ADC RDATA bit 13 */ +#define ADC_DR_RDATA_14 ((uint32_t)0x00004000) /*!< ADC RDATA bit 14 */ +#define ADC_DR_RDATA_15 ((uint32_t)0x00008000) /*!< ADC RDATA bit 15 */ + +/******************** Bit definition for ADC_JSQR register ********************/ +#define ADC_JSQR_JL ((uint32_t)0x00000003) /*!< ADC injected channel sequence length */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00000001) /*!< ADC JL bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00000002) /*!< ADC JL bit 1 */ + +#define ADC_JSQR_JEXTSEL ((uint32_t)0x0000003C) /*!< ADC external trigger selection for injected group */ +#define ADC_JSQR_JEXTSEL_0 ((uint32_t)0x00000004) /*!< ADC JEXTSEL bit 0 */ +#define ADC_JSQR_JEXTSEL_1 ((uint32_t)0x00000008) /*!< ADC JEXTSEL bit 1 */ +#define ADC_JSQR_JEXTSEL_2 ((uint32_t)0x00000010) /*!< ADC JEXTSEL bit 2 */ +#define ADC_JSQR_JEXTSEL_3 ((uint32_t)0x00000020) /*!< ADC JEXTSEL bit 3 */ + +#define ADC_JSQR_JEXTEN ((uint32_t)0x000000C0) /*!< ADC external trigger enable and polarity selection for injected channels */ +#define ADC_JSQR_JEXTEN_0 ((uint32_t)0x00000040) /*!< ADC JEXTEN bit 0 */ +#define ADC_JSQR_JEXTEN_1 ((uint32_t)0x00000080) /*!< ADC JEXTEN bit 1 */ + +#define ADC_JSQR_JSQ1 ((uint32_t)0x00001F00) /*!< ADC 1st conversion in injected sequence */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000100) /*!< ADC JSQ1 bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000200) /*!< ADC JSQ1 bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000400) /*!< ADC JSQ1 bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000800) /*!< ADC JSQ1 bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00001000) /*!< ADC JSQ1 bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x0007C000) /*!< ADC 2nd conversion in injected sequence */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00004000) /*!< ADC JSQ2 bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00008000) /*!< ADC JSQ2 bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00010000) /*!< ADC JSQ2 bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00020000) /*!< ADC JSQ2 bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00040000) /*!< ADC JSQ2 bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x01F00000) /*!< ADC 3rd conversion in injected sequence */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00100000) /*!< ADC JSQ3 bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00200000) /*!< ADC JSQ3 bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00400000) /*!< ADC JSQ3 bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00800000) /*!< ADC JSQ3 bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x01000000) /*!< ADC JSQ3 bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x7C000000) /*!< ADC 4th conversion in injected sequence */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x04000000) /*!< ADC JSQ4 bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x08000000) /*!< ADC JSQ4 bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x10000000) /*!< ADC JSQ4 bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x20000000) /*!< ADC JSQ4 bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x40000000) /*!< ADC JSQ4 bit 4 */ + + +/******************** Bit definition for ADC_OFR1 register ********************/ +#define ADC_OFR1_OFFSET1 ((uint32_t)0x00000FFF) /*!< ADC data offset 1 for channel programmed into bits OFFSET1_CH[4:0] */ +#define ADC_OFR1_OFFSET1_0 ((uint32_t)0x00000001) /*!< ADC OFFSET1 bit 0 */ +#define ADC_OFR1_OFFSET1_1 ((uint32_t)0x00000002) /*!< ADC OFFSET1 bit 1 */ +#define ADC_OFR1_OFFSET1_2 ((uint32_t)0x00000004) /*!< ADC OFFSET1 bit 2 */ +#define ADC_OFR1_OFFSET1_3 ((uint32_t)0x00000008) /*!< ADC OFFSET1 bit 3 */ +#define ADC_OFR1_OFFSET1_4 ((uint32_t)0x00000010) /*!< ADC OFFSET1 bit 4 */ +#define ADC_OFR1_OFFSET1_5 ((uint32_t)0x00000020) /*!< ADC OFFSET1 bit 5 */ +#define ADC_OFR1_OFFSET1_6 ((uint32_t)0x00000040) /*!< ADC OFFSET1 bit 6 */ +#define ADC_OFR1_OFFSET1_7 ((uint32_t)0x00000080) /*!< ADC OFFSET1 bit 7 */ +#define ADC_OFR1_OFFSET1_8 ((uint32_t)0x00000100) /*!< ADC OFFSET1 bit 8 */ +#define ADC_OFR1_OFFSET1_9 ((uint32_t)0x00000200) /*!< ADC OFFSET1 bit 9 */ +#define ADC_OFR1_OFFSET1_10 ((uint32_t)0x00000400) /*!< ADC OFFSET1 bit 10 */ +#define ADC_OFR1_OFFSET1_11 ((uint32_t)0x00000800) /*!< ADC OFFSET1 bit 11 */ + +#define ADC_OFR1_OFFSET1_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 1 */ +#define ADC_OFR1_OFFSET1_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET1_CH bit 0 */ +#define ADC_OFR1_OFFSET1_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET1_CH bit 1 */ +#define ADC_OFR1_OFFSET1_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET1_CH bit 2 */ +#define ADC_OFR1_OFFSET1_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET1_CH bit 3 */ +#define ADC_OFR1_OFFSET1_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET1_CH bit 4 */ + +#define ADC_OFR1_OFFSET1_EN ((uint32_t)0x80000000) /*!< ADC offset 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ********************/ +#define ADC_OFR2_OFFSET2 ((uint32_t)0x00000FFF) /*!< ADC data offset 2 for channel programmed into bits OFFSET2_CH[4:0] */ +#define ADC_OFR2_OFFSET2_0 ((uint32_t)0x00000001) /*!< ADC OFFSET2 bit 0 */ +#define ADC_OFR2_OFFSET2_1 ((uint32_t)0x00000002) /*!< ADC OFFSET2 bit 1 */ +#define ADC_OFR2_OFFSET2_2 ((uint32_t)0x00000004) /*!< ADC OFFSET2 bit 2 */ +#define ADC_OFR2_OFFSET2_3 ((uint32_t)0x00000008) /*!< ADC OFFSET2 bit 3 */ +#define ADC_OFR2_OFFSET2_4 ((uint32_t)0x00000010) /*!< ADC OFFSET2 bit 4 */ +#define ADC_OFR2_OFFSET2_5 ((uint32_t)0x00000020) /*!< ADC OFFSET2 bit 5 */ +#define ADC_OFR2_OFFSET2_6 ((uint32_t)0x00000040) /*!< ADC OFFSET2 bit 6 */ +#define ADC_OFR2_OFFSET2_7 ((uint32_t)0x00000080) /*!< ADC OFFSET2 bit 7 */ +#define ADC_OFR2_OFFSET2_8 ((uint32_t)0x00000100) /*!< ADC OFFSET2 bit 8 */ +#define ADC_OFR2_OFFSET2_9 ((uint32_t)0x00000200) /*!< ADC OFFSET2 bit 9 */ +#define ADC_OFR2_OFFSET2_10 ((uint32_t)0x00000400) /*!< ADC OFFSET2 bit 10 */ +#define ADC_OFR2_OFFSET2_11 ((uint32_t)0x00000800) /*!< ADC OFFSET2 bit 11 */ + +#define ADC_OFR2_OFFSET2_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 2 */ +#define ADC_OFR2_OFFSET2_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET2_CH bit 0 */ +#define ADC_OFR2_OFFSET2_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET2_CH bit 1 */ +#define ADC_OFR2_OFFSET2_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET2_CH bit 2 */ +#define ADC_OFR2_OFFSET2_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET2_CH bit 3 */ +#define ADC_OFR2_OFFSET2_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET2_CH bit 4 */ + +#define ADC_OFR2_OFFSET2_EN ((uint32_t)0x80000000) /*!< ADC offset 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ********************/ +#define ADC_OFR3_OFFSET3 ((uint32_t)0x00000FFF) /*!< ADC data offset 3 for channel programmed into bits OFFSET3_CH[4:0] */ +#define ADC_OFR3_OFFSET3_0 ((uint32_t)0x00000001) /*!< ADC OFFSET3 bit 0 */ +#define ADC_OFR3_OFFSET3_1 ((uint32_t)0x00000002) /*!< ADC OFFSET3 bit 1 */ +#define ADC_OFR3_OFFSET3_2 ((uint32_t)0x00000004) /*!< ADC OFFSET3 bit 2 */ +#define ADC_OFR3_OFFSET3_3 ((uint32_t)0x00000008) /*!< ADC OFFSET3 bit 3 */ +#define ADC_OFR3_OFFSET3_4 ((uint32_t)0x00000010) /*!< ADC OFFSET3 bit 4 */ +#define ADC_OFR3_OFFSET3_5 ((uint32_t)0x00000020) /*!< ADC OFFSET3 bit 5 */ +#define ADC_OFR3_OFFSET3_6 ((uint32_t)0x00000040) /*!< ADC OFFSET3 bit 6 */ +#define ADC_OFR3_OFFSET3_7 ((uint32_t)0x00000080) /*!< ADC OFFSET3 bit 7 */ +#define ADC_OFR3_OFFSET3_8 ((uint32_t)0x00000100) /*!< ADC OFFSET3 bit 8 */ +#define ADC_OFR3_OFFSET3_9 ((uint32_t)0x00000200) /*!< ADC OFFSET3 bit 9 */ +#define ADC_OFR3_OFFSET3_10 ((uint32_t)0x00000400) /*!< ADC OFFSET3 bit 10 */ +#define ADC_OFR3_OFFSET3_11 ((uint32_t)0x00000800) /*!< ADC OFFSET3 bit 11 */ + +#define ADC_OFR3_OFFSET3_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 3 */ +#define ADC_OFR3_OFFSET3_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET3_CH bit 0 */ +#define ADC_OFR3_OFFSET3_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET3_CH bit 1 */ +#define ADC_OFR3_OFFSET3_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET3_CH bit 2 */ +#define ADC_OFR3_OFFSET3_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET3_CH bit 3 */ +#define ADC_OFR3_OFFSET3_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET3_CH bit 4 */ + +#define ADC_OFR3_OFFSET3_EN ((uint32_t)0x80000000) /*!< ADC offset 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ********************/ +#define ADC_OFR4_OFFSET4 ((uint32_t)0x00000FFF) /*!< ADC data offset 4 for channel programmed into bits OFFSET4_CH[4:0] */ +#define ADC_OFR4_OFFSET4_0 ((uint32_t)0x00000001) /*!< ADC OFFSET4 bit 0 */ +#define ADC_OFR4_OFFSET4_1 ((uint32_t)0x00000002) /*!< ADC OFFSET4 bit 1 */ +#define ADC_OFR4_OFFSET4_2 ((uint32_t)0x00000004) /*!< ADC OFFSET4 bit 2 */ +#define ADC_OFR4_OFFSET4_3 ((uint32_t)0x00000008) /*!< ADC OFFSET4 bit 3 */ +#define ADC_OFR4_OFFSET4_4 ((uint32_t)0x00000010) /*!< ADC OFFSET4 bit 4 */ +#define ADC_OFR4_OFFSET4_5 ((uint32_t)0x00000020) /*!< ADC OFFSET4 bit 5 */ +#define ADC_OFR4_OFFSET4_6 ((uint32_t)0x00000040) /*!< ADC OFFSET4 bit 6 */ +#define ADC_OFR4_OFFSET4_7 ((uint32_t)0x00000080) /*!< ADC OFFSET4 bit 7 */ +#define ADC_OFR4_OFFSET4_8 ((uint32_t)0x00000100) /*!< ADC OFFSET4 bit 8 */ +#define ADC_OFR4_OFFSET4_9 ((uint32_t)0x00000200) /*!< ADC OFFSET4 bit 9 */ +#define ADC_OFR4_OFFSET4_10 ((uint32_t)0x00000400) /*!< ADC OFFSET4 bit 10 */ +#define ADC_OFR4_OFFSET4_11 ((uint32_t)0x00000800) /*!< ADC OFFSET4 bit 11 */ + +#define ADC_OFR4_OFFSET4_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 4 */ +#define ADC_OFR4_OFFSET4_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET4_CH bit 0 */ +#define ADC_OFR4_OFFSET4_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET4_CH bit 1 */ +#define ADC_OFR4_OFFSET4_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET4_CH bit 2 */ +#define ADC_OFR4_OFFSET4_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET4_CH bit 3 */ +#define ADC_OFR4_OFFSET4_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET4_CH bit 4 */ + +#define ADC_OFR4_OFFSET4_EN ((uint32_t)0x80000000) /*!< ADC offset 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ********************/ +#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */ +#define ADC_JDR1_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */ +#define ADC_JDR1_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */ +#define ADC_JDR1_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */ +#define ADC_JDR1_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */ +#define ADC_JDR1_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */ +#define ADC_JDR1_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */ +#define ADC_JDR1_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */ +#define ADC_JDR1_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */ +#define ADC_JDR1_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */ +#define ADC_JDR1_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */ +#define ADC_JDR1_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */ +#define ADC_JDR1_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */ +#define ADC_JDR1_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */ +#define ADC_JDR1_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */ +#define ADC_JDR1_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */ +#define ADC_JDR1_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */ + +/******************** Bit definition for ADC_JDR2 register ********************/ +#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */ +#define ADC_JDR2_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */ +#define ADC_JDR2_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */ +#define ADC_JDR2_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */ +#define ADC_JDR2_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */ +#define ADC_JDR2_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */ +#define ADC_JDR2_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */ +#define ADC_JDR2_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */ +#define ADC_JDR2_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */ +#define ADC_JDR2_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */ +#define ADC_JDR2_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */ +#define ADC_JDR2_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */ +#define ADC_JDR2_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */ +#define ADC_JDR2_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */ +#define ADC_JDR2_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */ +#define ADC_JDR2_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */ +#define ADC_JDR2_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */ + +/******************** Bit definition for ADC_JDR3 register ********************/ +#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */ +#define ADC_JDR3_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */ +#define ADC_JDR3_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */ +#define ADC_JDR3_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */ +#define ADC_JDR3_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */ +#define ADC_JDR3_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */ +#define ADC_JDR3_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */ +#define ADC_JDR3_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */ +#define ADC_JDR3_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */ +#define ADC_JDR3_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */ +#define ADC_JDR3_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */ +#define ADC_JDR3_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */ +#define ADC_JDR3_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */ +#define ADC_JDR3_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */ +#define ADC_JDR3_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */ +#define ADC_JDR3_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */ +#define ADC_JDR3_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */ + +/******************** Bit definition for ADC_JDR4 register ********************/ +#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */ +#define ADC_JDR4_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */ +#define ADC_JDR4_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */ +#define ADC_JDR4_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */ +#define ADC_JDR4_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */ +#define ADC_JDR4_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */ +#define ADC_JDR4_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */ +#define ADC_JDR4_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */ +#define ADC_JDR4_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */ +#define ADC_JDR4_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */ +#define ADC_JDR4_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */ +#define ADC_JDR4_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */ +#define ADC_JDR4_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */ +#define ADC_JDR4_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */ +#define ADC_JDR4_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */ +#define ADC_JDR4_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */ +#define ADC_JDR4_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */ + +/******************** Bit definition for ADC_AWD2CR register ********************/ +#define ADC_AWD2CR_AWD2CH ((uint32_t)0x0007FFFF) /*!< ADC Analog watchdog 2 channel selection */ +#define ADC_AWD2CR_AWD2CH_0 ((uint32_t)0x00000001) /*!< ADC AWD2CH bit 0 */ +#define ADC_AWD2CR_AWD2CH_1 ((uint32_t)0x00000002) /*!< ADC AWD2CH bit 1 */ +#define ADC_AWD2CR_AWD2CH_2 ((uint32_t)0x00000004) /*!< ADC AWD2CH bit 2 */ +#define ADC_AWD2CR_AWD2CH_3 ((uint32_t)0x00000008) /*!< ADC AWD2CH bit 3 */ +#define ADC_AWD2CR_AWD2CH_4 ((uint32_t)0x00000010) /*!< ADC AWD2CH bit 4 */ +#define ADC_AWD2CR_AWD2CH_5 ((uint32_t)0x00000020) /*!< ADC AWD2CH bit 5 */ +#define ADC_AWD2CR_AWD2CH_6 ((uint32_t)0x00000040) /*!< ADC AWD2CH bit 6 */ +#define ADC_AWD2CR_AWD2CH_7 ((uint32_t)0x00000080) /*!< ADC AWD2CH bit 7 */ +#define ADC_AWD2CR_AWD2CH_8 ((uint32_t)0x00000100) /*!< ADC AWD2CH bit 8 */ +#define ADC_AWD2CR_AWD2CH_9 ((uint32_t)0x00000200) /*!< ADC AWD2CH bit 9 */ +#define ADC_AWD2CR_AWD2CH_10 ((uint32_t)0x00000400) /*!< ADC AWD2CH bit 10 */ +#define ADC_AWD2CR_AWD2CH_11 ((uint32_t)0x00000800) /*!< ADC AWD2CH bit 11 */ +#define ADC_AWD2CR_AWD2CH_12 ((uint32_t)0x00001000) /*!< ADC AWD2CH bit 12 */ +#define ADC_AWD2CR_AWD2CH_13 ((uint32_t)0x00002000) /*!< ADC AWD2CH bit 13 */ +#define ADC_AWD2CR_AWD2CH_14 ((uint32_t)0x00004000) /*!< ADC AWD2CH bit 14 */ +#define ADC_AWD2CR_AWD2CH_15 ((uint32_t)0x00008000) /*!< ADC AWD2CH bit 15 */ +#define ADC_AWD2CR_AWD2CH_16 ((uint32_t)0x00010000) /*!< ADC AWD2CH bit 16 */ +#define ADC_AWD2CR_AWD2CH_17 ((uint32_t)0x00020000) /*!< ADC AWD2CH bit 17 */ +#define ADC_AWD2CR_AWD2CH_18 ((uint32_t)0x00040000) /*!< ADC AWD2CH bit 18 */ + +/******************** Bit definition for ADC_AWD3CR register ********************/ +#define ADC_AWD3CR_AWD3CH ((uint32_t)0x0007FFFF) /*!< ADC Analog watchdog 3 channel selection */ +#define ADC_AWD3CR_AWD3CH_0 ((uint32_t)0x00000001) /*!< ADC AWD3CH bit 0 */ +#define ADC_AWD3CR_AWD3CH_1 ((uint32_t)0x00000002) /*!< ADC AWD3CH bit 1 */ +#define ADC_AWD3CR_AWD3CH_2 ((uint32_t)0x00000004) /*!< ADC AWD3CH bit 2 */ +#define ADC_AWD3CR_AWD3CH_3 ((uint32_t)0x00000008) /*!< ADC AWD3CH bit 3 */ +#define ADC_AWD3CR_AWD3CH_4 ((uint32_t)0x00000010) /*!< ADC AWD3CH bit 4 */ +#define ADC_AWD3CR_AWD3CH_5 ((uint32_t)0x00000020) /*!< ADC AWD3CH bit 5 */ +#define ADC_AWD3CR_AWD3CH_6 ((uint32_t)0x00000040) /*!< ADC AWD3CH bit 6 */ +#define ADC_AWD3CR_AWD3CH_7 ((uint32_t)0x00000080) /*!< ADC AWD3CH bit 7 */ +#define ADC_AWD3CR_AWD3CH_8 ((uint32_t)0x00000100) /*!< ADC AWD3CH bit 8 */ +#define ADC_AWD3CR_AWD3CH_9 ((uint32_t)0x00000200) /*!< ADC AWD3CH bit 9 */ +#define ADC_AWD3CR_AWD3CH_10 ((uint32_t)0x00000400) /*!< ADC AWD3CH bit 10 */ +#define ADC_AWD3CR_AWD3CH_11 ((uint32_t)0x00000800) /*!< ADC AWD3CH bit 11 */ +#define ADC_AWD3CR_AWD3CH_12 ((uint32_t)0x00001000) /*!< ADC AWD3CH bit 12 */ +#define ADC_AWD3CR_AWD3CH_13 ((uint32_t)0x00002000) /*!< ADC AWD3CH bit 13 */ +#define ADC_AWD3CR_AWD3CH_14 ((uint32_t)0x00004000) /*!< ADC AWD3CH bit 14 */ +#define ADC_AWD3CR_AWD3CH_15 ((uint32_t)0x00008000) /*!< ADC AWD3CH bit 15 */ +#define ADC_AWD3CR_AWD3CH_16 ((uint32_t)0x00010000) /*!< ADC AWD3CH bit 16 */ +#define ADC_AWD3CR_AWD3CH_17 ((uint32_t)0x00020000) /*!< ADC AWD3CH bit 17 */ +#define ADC_AWD3CR_AWD3CH_18 ((uint32_t)0x00040000) /*!< ADC AWD3CH bit 18 */ + +/******************** Bit definition for ADC_DIFSEL register ********************/ +#define ADC_DIFSEL_DIFSEL ((uint32_t)0x0007FFFF) /*!< ADC differential modes for channels 1 to 18 */ +#define ADC_DIFSEL_DIFSEL_0 ((uint32_t)0x00000001) /*!< ADC DIFSEL bit 0 */ +#define ADC_DIFSEL_DIFSEL_1 ((uint32_t)0x00000002) /*!< ADC DIFSEL bit 1 */ +#define ADC_DIFSEL_DIFSEL_2 ((uint32_t)0x00000004) /*!< ADC DIFSEL bit 2 */ +#define ADC_DIFSEL_DIFSEL_3 ((uint32_t)0x00000008) /*!< ADC DIFSEL bit 3 */ +#define ADC_DIFSEL_DIFSEL_4 ((uint32_t)0x00000010) /*!< ADC DIFSEL bit 4 */ +#define ADC_DIFSEL_DIFSEL_5 ((uint32_t)0x00000020) /*!< ADC DIFSEL bit 5 */ +#define ADC_DIFSEL_DIFSEL_6 ((uint32_t)0x00000040) /*!< ADC DIFSEL bit 6 */ +#define ADC_DIFSEL_DIFSEL_7 ((uint32_t)0x00000080) /*!< ADC DIFSEL bit 7 */ +#define ADC_DIFSEL_DIFSEL_8 ((uint32_t)0x00000100) /*!< ADC DIFSEL bit 8 */ +#define ADC_DIFSEL_DIFSEL_9 ((uint32_t)0x00000200) /*!< ADC DIFSEL bit 9 */ +#define ADC_DIFSEL_DIFSEL_10 ((uint32_t)0x00000400) /*!< ADC DIFSEL bit 10 */ +#define ADC_DIFSEL_DIFSEL_11 ((uint32_t)0x00000800) /*!< ADC DIFSEL bit 11 */ +#define ADC_DIFSEL_DIFSEL_12 ((uint32_t)0x00001000) /*!< ADC DIFSEL bit 12 */ +#define ADC_DIFSEL_DIFSEL_13 ((uint32_t)0x00002000) /*!< ADC DIFSEL bit 13 */ +#define ADC_DIFSEL_DIFSEL_14 ((uint32_t)0x00004000) /*!< ADC DIFSEL bit 14 */ +#define ADC_DIFSEL_DIFSEL_15 ((uint32_t)0x00008000) /*!< ADC DIFSEL bit 15 */ +#define ADC_DIFSEL_DIFSEL_16 ((uint32_t)0x00010000) /*!< ADC DIFSEL bit 16 */ +#define ADC_DIFSEL_DIFSEL_17 ((uint32_t)0x00020000) /*!< ADC DIFSEL bit 17 */ +#define ADC_DIFSEL_DIFSEL_18 ((uint32_t)0x00040000) /*!< ADC DIFSEL bit 18 */ + +/******************** Bit definition for ADC_CALFACT register ********************/ +#define ADC_CALFACT_CALFACT_S ((uint32_t)0x0000007F) /*!< ADC calibration factors in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 ((uint32_t)0x00000001) /*!< ADC CALFACT_S bit 0 */ +#define ADC_CALFACT_CALFACT_S_1 ((uint32_t)0x00000002) /*!< ADC CALFACT_S bit 1 */ +#define ADC_CALFACT_CALFACT_S_2 ((uint32_t)0x00000004) /*!< ADC CALFACT_S bit 2 */ +#define ADC_CALFACT_CALFACT_S_3 ((uint32_t)0x00000008) /*!< ADC CALFACT_S bit 3 */ +#define ADC_CALFACT_CALFACT_S_4 ((uint32_t)0x00000010) /*!< ADC CALFACT_S bit 4 */ +#define ADC_CALFACT_CALFACT_S_5 ((uint32_t)0x00000020) /*!< ADC CALFACT_S bit 5 */ +#define ADC_CALFACT_CALFACT_S_6 ((uint32_t)0x00000040) /*!< ADC CALFACT_S bit 6 */ + +#define ADC_CALFACT_CALFACT_D ((uint32_t)0x007F0000) /*!< ADC calibration factors in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 ((uint32_t)0x00010000) /*!< ADC CALFACT_D bit 0 */ +#define ADC_CALFACT_CALFACT_D_1 ((uint32_t)0x00020000) /*!< ADC CALFACT_D bit 1 */ +#define ADC_CALFACT_CALFACT_D_2 ((uint32_t)0x00040000) /*!< ADC CALFACT_D bit 2 */ +#define ADC_CALFACT_CALFACT_D_3 ((uint32_t)0x00080000) /*!< ADC CALFACT_D bit 3 */ +#define ADC_CALFACT_CALFACT_D_4 ((uint32_t)0x00100000) /*!< ADC CALFACT_D bit 4 */ +#define ADC_CALFACT_CALFACT_D_5 ((uint32_t)0x00200000) /*!< ADC CALFACT_D bit 5 */ +#define ADC_CALFACT_CALFACT_D_6 ((uint32_t)0x00400000) /*!< ADC CALFACT_D bit 6 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register ********************/ +#define ADC_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */ +#define ADC_CSR_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */ +#define ADC_CSR_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */ +#define ADC_CSR_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */ +#define ADC_CSR_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */ +#define ADC_CSR_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */ +#define ADC_CSR_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */ +#define ADC_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */ +#define ADC_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */ +#define ADC_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */ +#define ADC_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */ + +#define ADC_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */ +#define ADC_CSR_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */ +#define ADC_CSR_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */ +#define ADC_CSR_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */ +#define ADC_CSR_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */ +#define ADC_CSR_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */ +#define ADC_CSR_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */ +#define ADC_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */ +#define ADC_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */ +#define ADC_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */ +#define ADC_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */ + +/******************** Bit definition for ADC_CCR register ********************/ +#define ADC_CCR_DUAL ((uint32_t)0x0000001F) /*!< Dual ADC mode selection */ +#define ADC_CCR_DUAL_0 ((uint32_t)0x00000001) /*!< Dual bit 0 */ +#define ADC_CCR_DUAL_1 ((uint32_t)0x00000002) /*!< Dual bit 1 */ +#define ADC_CCR_DUAL_2 ((uint32_t)0x00000004) /*!< Dual bit 2 */ +#define ADC_CCR_DUAL_3 ((uint32_t)0x00000008) /*!< Dual bit 3 */ +#define ADC_CCR_DUAL_4 ((uint32_t)0x00000010) /*!< Dual bit 4 */ + +#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!< Delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!< DELAY bit 0 */ +#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!< DELAY bit 1 */ +#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!< DELAY bit 2 */ +#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!< DELAY bit 3 */ + +#define ADC_CCR_DMACFG ((uint32_t)0x00002000) /*!< DMA configuration for multi-ADC mode */ + +#define ADC_CCR_MDMA ((uint32_t)0x0000C000) /*!< DMA mode for multi-ADC mode */ +#define ADC_CCR_MDMA_0 ((uint32_t)0x00004000) /*!< MDMA bit 0 */ +#define ADC_CCR_MDMA_1 ((uint32_t)0x00008000) /*!< MDMA bit 1 */ + +#define ADC_CCR_CKMODE ((uint32_t)0x00030000) /*!< ADC clock mode */ +#define ADC_CCR_CKMODE_0 ((uint32_t)0x00010000) /*!< CKMODE bit 0 */ +#define ADC_CCR_CKMODE_1 ((uint32_t)0x00020000) /*!< CKMODE bit 1 */ + +#define ADC_CCR_PRESC ((uint32_t)0x003C0000) /*!< ADC prescaler */ +#define ADC_CCR_PRESC_0 ((uint32_t)0x00040000) /*!< ADC prescaler bit 0 */ +#define ADC_CCR_PRESC_1 ((uint32_t)0x00080000) /*!< ADC prescaler bit 1 */ +#define ADC_CCR_PRESC_2 ((uint32_t)0x00100000) /*!< ADC prescaler bit 2 */ +#define ADC_CCR_PRESC_3 ((uint32_t)0x00200000) /*!< ADC prescaler bit 3 */ + +#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< VREFINT enable */ +#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Temperature sensor enable */ +#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< VBAT enable */ + +/******************** Bit definition for ADC_CDR register ********************/ +#define ADC_CDR_RDATA_MST ((uint32_t)0x0000FFFF) /*!< Regular Data of the master ADC */ +#define ADC_CDR_RDATA_MST_0 ((uint32_t)0x00000001) /*!< RDATA_MST bit 0 */ +#define ADC_CDR_RDATA_MST_1 ((uint32_t)0x00000002) /*!< RDATA_MST bit 1 */ +#define ADC_CDR_RDATA_MST_2 ((uint32_t)0x00000004) /*!< RDATA_MST bit 2 */ +#define ADC_CDR_RDATA_MST_3 ((uint32_t)0x00000008) /*!< RDATA_MST bit 3 */ +#define ADC_CDR_RDATA_MST_4 ((uint32_t)0x00000010) /*!< RDATA_MST bit 4 */ +#define ADC_CDR_RDATA_MST_5 ((uint32_t)0x00000020) /*!< RDATA_MST bit 5 */ +#define ADC_CDR_RDATA_MST_6 ((uint32_t)0x00000040) /*!< RDATA_MST bit 6 */ +#define ADC_CDR_RDATA_MST_7 ((uint32_t)0x00000080) /*!< RDATA_MST bit 7 */ +#define ADC_CDR_RDATA_MST_8 ((uint32_t)0x00000100) /*!< RDATA_MST bit 8 */ +#define ADC_CDR_RDATA_MST_9 ((uint32_t)0x00000200) /*!< RDATA_MST bit 9 */ +#define ADC_CDR_RDATA_MST_10 ((uint32_t)0x00000400) /*!< RDATA_MST bit 10 */ +#define ADC_CDR_RDATA_MST_11 ((uint32_t)0x00000800) /*!< RDATA_MST bit 11 */ +#define ADC_CDR_RDATA_MST_12 ((uint32_t)0x00001000) /*!< RDATA_MST bit 12 */ +#define ADC_CDR_RDATA_MST_13 ((uint32_t)0x00002000) /*!< RDATA_MST bit 13 */ +#define ADC_CDR_RDATA_MST_14 ((uint32_t)0x00004000) /*!< RDATA_MST bit 14 */ +#define ADC_CDR_RDATA_MST_15 ((uint32_t)0x00008000) /*!< RDATA_MST bit 15 */ + +#define ADC_CDR_RDATA_SLV ((uint32_t)0xFFFF0000) /*!< Regular Data of the master ADC */ +#define ADC_CDR_RDATA_SLV_0 ((uint32_t)0x00010000) /*!< RDATA_SLV bit 0 */ +#define ADC_CDR_RDATA_SLV_1 ((uint32_t)0x00020000) /*!< RDATA_SLV bit 1 */ +#define ADC_CDR_RDATA_SLV_2 ((uint32_t)0x00040000) /*!< RDATA_SLV bit 2 */ +#define ADC_CDR_RDATA_SLV_3 ((uint32_t)0x00080000) /*!< RDATA_SLV bit 3 */ +#define ADC_CDR_RDATA_SLV_4 ((uint32_t)0x00100000) /*!< RDATA_SLV bit 4 */ +#define ADC_CDR_RDATA_SLV_5 ((uint32_t)0x00200000) /*!< RDATA_SLV bit 5 */ +#define ADC_CDR_RDATA_SLV_6 ((uint32_t)0x00400000) /*!< RDATA_SLV bit 6 */ +#define ADC_CDR_RDATA_SLV_7 ((uint32_t)0x00800000) /*!< RDATA_SLV bit 7 */ +#define ADC_CDR_RDATA_SLV_8 ((uint32_t)0x01000000) /*!< RDATA_SLV bit 8 */ +#define ADC_CDR_RDATA_SLV_9 ((uint32_t)0x02000000) /*!< RDATA_SLV bit 9 */ +#define ADC_CDR_RDATA_SLV_10 ((uint32_t)0x04000000) /*!< RDATA_SLV bit 10 */ +#define ADC_CDR_RDATA_SLV_11 ((uint32_t)0x08000000) /*!< RDATA_SLV bit 11 */ +#define ADC_CDR_RDATA_SLV_12 ((uint32_t)0x10000000) /*!< RDATA_SLV bit 12 */ +#define ADC_CDR_RDATA_SLV_13 ((uint32_t)0x20000000) /*!< RDATA_SLV bit 13 */ +#define ADC_CDR_RDATA_SLV_14 ((uint32_t)0x40000000) /*!< RDATA_SLV bit 14 */ +#define ADC_CDR_RDATA_SLV_15 ((uint32_t)0x80000000) /*!< RDATA_SLV bit 15 */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ +/*!*/ +#define DAC_CR_CEN1 ((uint32_t)0x00004000) /*!*/ + +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!*/ +#define DAC_CR_CEN2 ((uint32_t)0x40000000) /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!
© COPYRIGHT(c) 2015 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx + * @{ + */ + +#ifndef __STM32L4xx_H +#define __STM32L4xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32L4) +#define STM32L4 +#endif /* STM32L4 */ + +/* Uncomment the line below according to the target STM32L4 device used in your + application + */ + +#if !defined (STM32L471xx) && !defined (STM32L475xx) && !defined (STM32L476xx) && !defined (STM32L485xx) && !defined (STM32L486xx) + /* #define STM32L471xx */ /*!< STM32L471xx Devices */ + /* #define STM32L475xx */ /*!< STM32L475xx Devices */ +#define STM32L476xx /*!< STM32L476xx Devices */ + /* #define STM32L485xx */ /*!< STM32L485xx Devices */ + /* #define STM32L486xx */ /*!< STM32L486xx Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ +#define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V1.0.0 + */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__CMSIS_DEVICE_VERSION_SUB1 << 16)\ + |(__CMSIS_DEVICE_VERSION_SUB2 << 8 )\ + |(__CMSIS_DEVICE_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32L471xx) + #include "stm32l471xx.h" +#elif defined(STM32L475xx) + #include "stm32l475xx.h" +#elif defined(STM32L476xx) + #include "stm32l476xx.h" +#elif defined(STM32L485xx) + #include "stm32l485xx.h" +#elif defined(STM32L486xx) + #include "stm32l486xx.h" +#else + #error "Please select first the target STM32L4xx device used in your application (in stm32l4xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32l4xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L4xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/system_stm32l4xx.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/system_stm32l4xx.c new file mode 100644 index 0000000000..ec977662f3 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/system_stm32l4xx.c @@ -0,0 +1,591 @@ +/** + ****************************************************************************** + * @file system_stm32l4xx.c + * @author MCD Application Team + * @version V1.0.0 + * @date 26-June-2015 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the MSI (4 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI + * | (external 8 MHz clock) | (internal 16 MHz) + * | 2- PLL_HSE_XTAL | or PLL_MSI + * | (external 8 MHz xtal) | (internal 4 MHz) + *----------------------------------------------------------------------------- + * SYSCLK(MHz) | 48 | 80 + *----------------------------------------------------------------------------- + * AHBCLK (MHz) | 48 | 80 + *----------------------------------------------------------------------------- + * APB1CLK (MHz) | 48 | 80 + *----------------------------------------------------------------------------- + * APB2CLK (MHz) | 48 | 80 + *----------------------------------------------------------------------------- + * USB capable (48 MHz precise clock) | YES | NO + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx_system + * @{ + */ + +/** @addtogroup STM32L4xx_System_Private_Includes + * @{ + */ + +#include "stm32l4xx.h" +#include "hal_tick.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Macros + * @{ + */ + +// Select the clock sources (default is PLL_MSI) to start with (0=OFF, 1=ON) +#define USE_PLL_HSE_EXTC (1) // Use external clock +#define USE_PLL_HSE_XTAL (0) // Use external xtal +#define USE_PLL_HSI (0) // Use HSI/MSI internal clock (0=MSI, 1=HSI) +#define DEBUG_MCO (0) // Output the MCO on PA8 for debugging (0=OFF, 1=SYSCLK, 2=HSE, 3=HSI, 4=MSI) +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 4000000; + + const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + const uint32_t MSIRangeTable[12] = {100000, 200000, 400000, 800000, 1000000, 2000000, \ + 4000000, 8000000, 16000000, 24000000, 32000000, 48000000}; +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif + +#if (USE_PLL_HSI != 0) +uint8_t SetSysClock_PLL_HSI(void); +#endif + +uint8_t SetSysClock_PLL_MSI(void); + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ + +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set MSION bit */ + RCC->CR |= RCC_CR_MSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON , HSION, and PLLON bits */ + RCC->CR &= (uint32_t)0xEAF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x00000800; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000; + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + + /* Configure the Cube driver */ + SystemCoreClock = MSI_VALUE; // At this stage the MSI is used as system clock + HAL_Init(); + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings */ + SetSysClock(); + + /* Reset the timer to avoid issues after the RAM initialization */ + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, msirange = 0, pllvco = 0, pllr = 2, pllsource = 0, pllm = 2; + + /* Get MSI Range frequency--------------------------------------------------*/ + if((RCC->CR & RCC_CR_MSIRGSEL) == RESET) + { /* MSISRANGE from RCC_CSR applies */ + msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* MSI used as system clock source */ + SystemCoreClock = msirange; + break; + + case 0x04: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4) + 1 ; + + switch (pllsource) + { + case 0x02: /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm); + break; + + case 0x03: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm); + break; + + default: /* MSI used as PLL clock source */ + pllvco = (msirange / pllm); + break; + } + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25) + 1) * 2; + SystemCoreClock = pllvco/pllr; + break; + + default: + SystemCoreClock = msirange; + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +void SetSysClock(void) +{ + /* 1- Try to start with HSE and external clock */ +#if USE_PLL_HSE_EXTC != 0 + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { + /* 2- If fail try to start with HSE and external xtal */ +#if USE_PLL_HSE_XTAL != 0 + if (SetSysClock_PLL_HSE(0) == 0) +#endif + { + /* 3- If fail start with HSI or MSI clock */ +#if (USE_PLL_HSI != 0) + if (SetSysClock_PLL_HSI() == 0) +#else + if (SetSysClock_PLL_MSI() == 0) +#endif + { + while(1) + { + // [TODO] Put something here to tell the user that a problem occured... + } + } + } + } + + // Output clock on MCO1 pin(PA8) for debugging purpose +#if DEBUG_MCO == 1 + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1); +#endif +} + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + + // Used to gain time after DeepSleep in case HSI is used + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + return 0; + } + + // Select MSI as system clock source to allow modification of the PLL configuration + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); + + // Enable HSE oscillator and activate PLL with HSE as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI; + if (bypass == 0) + { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } + else + { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + + // Non-USB configuration : sysclock = 80MHz + //RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1) + //RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20) + //RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7) + //RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 40 MHz (160 MHz / 4) --> Not good for USB + //RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2) + + // USB configuration : sysclock = 48 MHz + RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1) + RCC_OscInitStruct.PLL.PLLN = 24; // VCO output clock = 192 MHz (8 MHz * 24) + RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 27.4 MHz (192 MHz / 7) + RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 48 MHz (192 MHz / 4) --> OK for USB + RCC_OscInitStruct.PLL.PLLR = 4; // PLL clock = 48 MHz (192 MHz / 4) + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL clock as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz or 48 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz or 48 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + return 0; // FAIL + } + + // Disable MSI Oscillator + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + // Output clock on MCO1 pin(PA8) for debugging purpose +#if DEBUG_MCO == 2 + if (bypass == 0) + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz + else + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz +#endif + + return 1; // OK +} +#endif + +#if (USE_PLL_HSI != 0) +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + + // Select MSI as system clock source to allow modification of the PLL configuration + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); + + // Enable HSI oscillator and activate PLL with HSI as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; // 16 MHz + RCC_OscInitStruct.PLL.PLLM = 2; // VCO input clock = 8 MHz (16 MHz / 2) + RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20) + RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7) + RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 40 MHz (160 MHz / 4) --> Not good for USB + RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2) + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + return 0; // FAIL + } + + // Disable MSI Oscillator + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + // Output clock on MCO1 pin(PA8) for debugging purpose +#if DEBUG_MCO == 3 + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz +#endif + + return 1; // OK +} +#endif + +/******************************************************************************/ +/* PLL (clocked by MSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_MSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + + // Enable LSE Oscillator to automatically calibrate the MSI clock + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update + RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + RCC->CR |= RCC_CR_MSIPLLEN; // Enable MSI PLL-mode + } + + // Enable MSI oscillator and activate PLL with MSI as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; + RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; // 4 MHz + RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 4 MHz (4 MHz / 1) + RCC_OscInitStruct.PLL.PLLN = 40; // VCO output clock = 160 MHz (4 MHz * 40) + RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22.86 MHz (160 MHz / 7) + RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 40 MHz (160 MHz / 4) --> Not good for USB + RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2) + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + return 0; // FAIL + } + + // Output clock on MCO1 pin(PA8) for debugging purpose +#if DEBUG_MCO == 4 + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_2); // 2 MHz +#endif + + return 1; // OK +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/system_stm32l4xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/system_stm32l4xx.h new file mode 100644 index 0000000000..8c067a2b72 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/system_stm32l4xx.h @@ -0,0 +1,126 @@ +/** + ****************************************************************************** + * @file system_stm32l4xx.h + * @author MCD Application Team + * @version V1.0.0 + * @date 26-June-2015 + * @brief CMSIS Cortex-M4 Device System Source File for STM32L4xx devices. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32L4XX_H +#define __SYSTEM_STM32L4XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32L4xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32L4xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint32_t MSIRangeTable[12]; /*!< MSI ranges table values */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +extern void SetSysClock(void); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32L4XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralNames.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralNames.h new file mode 100644 index 0000000000..c1565ae909 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralNames.h @@ -0,0 +1,90 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ADC_1 = (int)ADC1_BASE, + ADC_2 = (int)ADC2_BASE, + ADC_3 = (int)ADC3_BASE +} ADCName; + +typedef enum { + DAC_1 = (int)DAC_BASE +} DACName; + +typedef enum { + UART_1 = (int)USART1_BASE, + UART_2 = (int)USART2_BASE, + UART_3 = (int)USART3_BASE, + UART_4 = (int)UART4_BASE, + UART_5 = (int)UART5_BASE, + LPUART_1 = (int)LPUART1_BASE +} UARTName; + +#define STDIO_UART_TX PA_2 +#define STDIO_UART_RX PA_3 +#define STDIO_UART UART_2 + +typedef enum { + SPI_1 = (int)SPI1_BASE, + SPI_2 = (int)SPI2_BASE, + SPI_3 = (int)SPI3_BASE +} SPIName; + +typedef enum { + I2C_1 = (int)I2C1_BASE, + I2C_2 = (int)I2C2_BASE, + I2C_3 = (int)I2C3_BASE +} I2CName; + +typedef enum { + PWM_1 = (int)TIM1_BASE, + PWM_2 = (int)TIM2_BASE, + PWM_3 = (int)TIM3_BASE, + PWM_4 = (int)TIM4_BASE, + PWM_5 = (int)TIM5_BASE, + PWM_8 = (int)TIM8_BASE, + PWM_15 = (int)TIM15_BASE, + PWM_16 = (int)TIM16_BASE, + PWM_17 = (int)TIM17_BASE +} PWMName; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralPins.c b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralPins.c new file mode 100644 index 0000000000..95f5e5a783 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralPins.c @@ -0,0 +1,224 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#include "PeripheralPins.h" + +// ===== +// Note: Commented lines are alternative possibilities which are not used per default. +// If you change them, you will have also to modify the corresponding xxx_api.c file +// for pwmout, analogin, analogout, ... +// ===== + +//*** ADC *** + +const PinMap PinMap_ADC[] = { + {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 5, 0)}, // IN5 - ARDUINO A0 + {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 6, 0)}, // IN6 - ARDUINO A1 + {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 7, 0)}, // IN7 + {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 8, 0)}, // IN8 + {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 9, 0)}, // IN9 - ARDUINO A2 + {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 10, 0)}, // IN10 + {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 11, 0)}, // IN11 + {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 12, 0)}, // IN12 + {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 15, 0)}, // IN15 - ARDUINO A3 + {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 16, 0)}, // IN16 + {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 1, 0)}, // IN1 - ARDUINO A5 + {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 2, 0)}, // IN2 - ARDUINO A4 + {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 3, 0)}, // IN3 + {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 4, 0)}, // IN4 + {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 13, 0)}, // IN13 + {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 14, 0)}, // IN14 + {NC, NC, 0} +}; + +//*** DAC *** + +const PinMap PinMap_DAC[] = { + {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // OUT1 + {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // OUT2 (Warning: LED1 is also on this pin) + {NC, NC, 0} +}; + +//*** I2C *** + +const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {NC, NC, 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {NC, NC, 0} +}; + +//*** PWM *** + +// Warning: TIM5 cannot be used because already used by the us_ticker. +const PinMap PinMap_PWM[] = { + {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 +// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 (used by us_ticker) + {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 +// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 (used by us_ticker) +// {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N + {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 +// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 (used by us_ticker) +// {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1 + {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 +// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 (used by us_ticker) +// {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2 + {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 +// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 +// {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1 + {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D11 +// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N +// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N +// {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1 + {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 +// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N +// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 +// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N +// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO D3 + {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D5 + {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO D10 +// {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)},// TIM16_CH1N + {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 +// {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)},// TIM17_CH1N + {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 +// {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1 + {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 +// {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1 + {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO D6 + {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N +// {PB_13, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N + {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N +// {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1 +// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N +// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2 +// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 +// {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D9 +// {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 +// {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 +// {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + {NC, NC, 0} +}; + +//*** SERIAL *** + +const PinMap PinMap_UART_TX[] = { + {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, +// {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Already used by UART_RX + {PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, + {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, +// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, + {NC, NC, 0} +}; + +const PinMap PinMap_UART_RX[] = { + {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, +// {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Already used by UART_TX + {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, + {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, +// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, + {NC, NC, 0} +}; + +//*** SPI *** + +const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11 + {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12 + {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D13 + {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, +// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, +// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {NC, NC, 0} +}; diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PinNames.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PinNames.h new file mode 100644 index 0000000000..5e411d7c12 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PinNames.h @@ -0,0 +1,195 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7))) + +#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7) |\ + ((CHANNEL & 0x0F) << 11) |\ + ((INVERTED & 0x01) << 15))) + +#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) +#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) +#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) +#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) +#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) + +#define STM_MODE_INPUT (0) +#define STM_MODE_OUTPUT_PP (1) +#define STM_MODE_OUTPUT_OD (2) +#define STM_MODE_AF_PP (3) +#define STM_MODE_AF_OD (4) +#define STM_MODE_ANALOG (5) +#define STM_MODE_ANALOG_ADC_CONTROL (6) +#define STM_MODE_IT_RISING (7) +#define STM_MODE_IT_FALLING (8) +#define STM_MODE_IT_RISING_FALLING (9) +#define STM_MODE_EVT_RISING (10) +#define STM_MODE_EVT_FALLING (11) +#define STM_MODE_EVT_RISING_FALLING (12) +#define STM_MODE_IT_EVT_RESET (13) + +// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) +// Low nibble = pin number +#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) +#define STM_PIN(X) ((uint32_t)(X) & 0xF) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_2 = 0x32, + + PH_0 = 0x70, + PH_1 = 0x71, + + // Arduino connector namings + A0 = PA_0, + A1 = PA_1, + A2 = PA_4, + A3 = PB_0, + A4 = PC_1, + A5 = PC_0, + D0 = PA_3, + D1 = PA_2, + D2 = PA_10, + D3 = PB_3, + D4 = PB_5, + D5 = PB_4, + D6 = PB_10, + D7 = PA_8, + D8 = PA_9, + D9 = PC_7, + D10 = PB_6, + D11 = PA_7, + D12 = PA_6, + D13 = PA_5, + D14 = PB_9, + D15 = PB_8, + + // Generic signals namings + LED1 = PA_5, + LED2 = PA_5, + LED3 = PA_5, + LED4 = PA_5, + USER_BUTTON = PC_13, + SERIAL_TX = PA_2, + SERIAL_RX = PA_3, + USBTX = PA_2, + USBRX = PA_3, + I2C_SCL = PB_8, + I2C_SDA = PB_9, + SPI_MOSI = PA_7, + SPI_MISO = PA_6, + SPI_SCK = PA_5, + SPI_CS = PB_6, + PWM_OUT = PB_3, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullUp = 1, + PullDown = 2, + OpenDrain = 3, + PullDefault = PullNone +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PortNames.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PortNames.h new file mode 100644 index 0000000000..a8c8007afb --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PortNames.h @@ -0,0 +1,49 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PORTNAMES_H +#define MBED_PORTNAMES_H + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PortA = 0, + PortB = 1, + PortC = 2, + PortD = 3, + PortE = 4, + PortH = 7 +} PortName; + +#ifdef __cplusplus +} +#endif +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/device.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/device.h new file mode 100644 index 0000000000..f842633cf8 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/device.h @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/objects.h b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/objects.h new file mode 100644 index 0000000000..8e57658d68 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/objects.h @@ -0,0 +1,114 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_OBJECTS_H +#define MBED_OBJECTS_H + +#include "cmsis.h" +#include "PortNames.h" +#include "PeripheralNames.h" +#include "PinNames.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct gpio_irq_s { + IRQn_Type irq_n; + uint32_t irq_index; + uint32_t event; + PinName pin; +}; + +struct port_s { + PortName port; + uint32_t mask; + PinDirection direction; + __IO uint32_t *reg_in; + __IO uint32_t *reg_out; +}; + +struct analogin_s { + ADCName adc; + PinName pin; + uint32_t channel; +}; + +struct dac_s { + DACName dac; + PinName pin; + uint32_t channel; +}; + +struct serial_s { + UARTName uart; + int index; // Used by irq + uint32_t baudrate; + uint32_t databits; + uint32_t stopbits; + uint32_t parity; + PinName pin_tx; + PinName pin_rx; +}; + +struct spi_s { + SPIName spi; + uint32_t bits; + uint32_t cpol; + uint32_t cpha; + uint32_t mode; + uint32_t nss; + uint32_t br_presc; + PinName pin_miso; + PinName pin_mosi; + PinName pin_sclk; + PinName pin_ssel; +}; + +struct i2c_s { + I2CName i2c; + uint32_t slave; +}; + +struct pwmout_s { + PWMName pwm; + PinName pin; + uint32_t period; + uint32_t pulse; + uint32_t channel; + uint32_t inverted; +}; + +#include "gpio_object.h" + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/workspace_tools/export/gccarm.py b/workspace_tools/export/gccarm.py index dd9e069b1b..b1613abb2c 100755 --- a/workspace_tools/export/gccarm.py +++ b/workspace_tools/export/gccarm.py @@ -78,6 +78,7 @@ class GccArm(Exporter): 'DISCO_L053C8', 'NUCLEO_L053R8', 'NUCLEO_L073RZ', + 'NUCLEO_L476RG', 'DISCO_F334C8', 'MAX32600MBED', 'MAXWSNENV', diff --git a/workspace_tools/export/iar.py b/workspace_tools/export/iar.py index 9d3d986f28..19d1d5e048 100755 --- a/workspace_tools/export/iar.py +++ b/workspace_tools/export/iar.py @@ -60,6 +60,7 @@ class IAREmbeddedWorkbench(Exporter): 'NUCLEO_L053R8', 'NUCLEO_L073RZ', 'NUCLEO_L152RE', + 'NUCLEO_L476RG', 'DISCO_L053C8', 'DISCO_F334C8', 'DISCO_F746NG', diff --git a/workspace_tools/export/uvision4.py b/workspace_tools/export/uvision4.py index 628217fe65..3226a5f6ab 100644 --- a/workspace_tools/export/uvision4.py +++ b/workspace_tools/export/uvision4.py @@ -54,6 +54,7 @@ class Uvision4(Exporter): 'NUCLEO_L053R8', 'NUCLEO_L073RZ', 'NUCLEO_L152RE', + 'NUCLEO_L476RG', 'UBLOX_C027', 'LPC1549', 'LPC11U68', @@ -102,6 +103,7 @@ class Uvision4(Exporter): 'NUCLEO_L053R8', 'NUCLEO_L073RZ', 'NUCLEO_L152RE', + 'NUCLEO_L476RG', 'DISCO_L053C8', 'DISCO_F334C8', 'DISCO_F746NG', diff --git a/workspace_tools/export_test.py b/workspace_tools/export_test.py index 16d118d46e..34ce1f1530 100755 --- a/workspace_tools/export_test.py +++ b/workspace_tools/export_test.py @@ -133,6 +133,7 @@ if __name__ == '__main__': ('uvision', 'NUCLEO_L053R8'), ('uvision', 'NUCLEO_L073RZ'), ('uvision', 'NUCLEO_L152RE'), + ('uvision', 'NUCLEO_L476RG'), ('uvision', 'MTS_MDOT_F405RG'), ('uvision', 'MAXWSNENV'), ('uvision', 'MAX32600MBED'), @@ -226,6 +227,7 @@ if __name__ == '__main__': ('iar', 'NUCLEO_L053R8'), ('iar', 'NUCLEO_L073RZ'), ('iar', 'NUCLEO_L152RE'), + ('iar', 'NUCLEO_L476RG'), ('iar', 'DISCO_L053C8'), ('iar', 'DISCO_F334C8'), ('iar', 'DISCO_F746NG'), diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py index 0f7c0a07da..5a01992261 100755 --- a/workspace_tools/targets.py +++ b/workspace_tools/targets.py @@ -692,6 +692,16 @@ class NUCLEO_L152RE(Target): self.supported_form_factors = ["ARDUINO", "MORPHO"] self.detect_code = ["0710"] +class NUCLEO_L476RG(Target): + def __init__(self): + Target.__init__(self) + self.core = "Cortex-M4F" + self.extra_labels = ['STM', 'STM32L4', 'STM32L476RG'] + self.supported_toolchains = ["ARM", "uARM", "IAR", "GCC_ARM"] + self.default_toolchain = "uARM" + self.supported_form_factors = ["ARDUINO", "MORPHO"] + self.detect_code = ["0765"] + class STM32F3XX(Target): def __init__(self): Target.__init__(self) @@ -1641,6 +1651,7 @@ TARGETS = [ NUCLEO_L053R8(), NUCLEO_L073RZ(), NUCLEO_L152RE(), + NUCLEO_L476RG(), STM32F3XX(), STM32F407(), DISCO_F051R8(),