From a66aad9866a7269d82191803964849b7a41e0f4c Mon Sep 17 00:00:00 2001 From: Arto Kinnunen Date: Tue, 18 Aug 2020 12:50:34 +0300 Subject: [PATCH 01/21] Nanostack: Remove existing copy of sal-stack-nanostack --- .../sal-stack-nanostack/.gitattributes | 3 - .../nanostack/sal-stack-nanostack/.gitignore | 71 - .../nanostack/sal-stack-nanostack/.mbedignore | 5 - .../sal-stack-nanostack/DOXYGEN_FRONTPAGE.md | 11 - .../nanostack/sal-stack-nanostack/Doxyfile | 2332 ----------- .../sal-stack-nanostack/LICENSE-Apache-2.0 | 15 - .../sal-stack-nanostack/LICENSE-BSD-3-Clause | 26 - .../nanostack/sal-stack-nanostack/Makefile | 197 - .../nanostack/sal-stack-nanostack/NOTICE | 20 - .../nanostack/sal-stack-nanostack/README.md | 39 - .../sal-stack-nanostack/doxygen/mainpage.dox | 15 - .../sal-stack-nanostack/include_dirs.mk | 4 - .../sal-stack-nanostack/mbed_lib.json | 19 - .../sal-stack-nanostack/nanostack/cca_api.h | 19 - .../sal-stack-nanostack/nanostack/ccmLIB.h | 118 - .../nanostack/dhcp_service_api.h | 239 -- .../nanostack/ethernet_mac_api.h | 178 - .../sal-stack-nanostack/nanostack/fhss_api.h | 312 -- .../nanostack/fhss_config.h | 222 -- .../nanostack/fhss_test_api.h | 57 - .../nanostack/fhss_ws_extension.h | 125 - .../sal-stack-nanostack/nanostack/mac_api.h | 315 -- .../nanostack/mac_common_defines.h | 103 - .../nanostack/mac_filter_api.h | 205 - .../sal-stack-nanostack/nanostack/mac_mcps.h | 168 - .../sal-stack-nanostack/nanostack/mlme.h | 519 --- .../nanostack/multicast_api.h | 355 -- .../nanostack/net_6lowpan_parameter_api.h | 124 - .../nanostack/net_address_extension.h | 65 - .../sal-stack-nanostack/nanostack/net_fhss.h | 92 - .../nanostack/net_interface.h | 1142 ------ .../nanostack/net_ipv6_api.h | 134 - .../nanostack/net_load_balance_api.h | 118 - .../nanostack/net_mle_api.h | 112 - .../nanostack/net_nvm_api.h | 275 -- .../nanostack/net_nwk_scan.h | 137 - .../nanostack/net_pana_parameters_api.h | 82 - .../nanostack/net_polling_api.h | 109 - .../sal-stack-nanostack/nanostack/net_rpl.h | 329 -- .../sal-stack-nanostack/nanostack/net_sleep.h | 64 - .../nanostack/net_test_api.h | 67 - .../nanostack/net_thread_test.h | 575 --- .../nanostack/net_ws_test.h | 175 - .../nanostack/ns_address.h | 47 - .../sal-stack-nanostack/nanostack/ns_conf.h | 62 - .../nanostack/ns_file_system.h | 160 - .../nanostack/ns_mdns_api.h | 102 - .../sal-stack-nanostack/nanostack/ns_sha256.h | 204 - .../nanostack/ns_time_api.h | 51 - .../nanostack/ns_virtual_rf_api.h | 53 - .../nanostack/nwk_stats_api.h | 98 - .../nanostack/platform/arm_hal_aes.h | 95 - .../nanostack/platform/arm_hal_phy.h | 382 -- .../nanostack/platform/os_whiteboard.h | 50 - .../nanostack/platform/topo_trace.h | 67 - .../nanostack/serial_mac_api.h | 90 - .../sal-stack-nanostack/nanostack/shalib.h | 104 - .../nanostack/socket_api.h | 834 ---- .../sal-stack-nanostack/nanostack/sw_mac.h | 119 - .../nanostack/thread_bbr_api.h | 132 - .../nanostack/thread_border_router_api.h | 323 -- .../nanostack/thread_commissioning_api.h | 292 -- .../nanostack/thread_dhcpv6_server.h | 102 - .../nanostack/thread_diagcop_lib.h | 174 - .../nanostack/thread_lowpower_api.h | 84 - .../nanostack/thread_management_api.h | 195 - .../nanostack/thread_management_if.h | 448 --- .../nanostack/thread_meshcop_lib.h | 428 -- .../nanostack/thread_net_config_api.h | 72 - .../nanostack/whiteboard_api.h | 61 - .../nanostack/ws_bbr_api.h | 355 -- .../nanostack/ws_management_api.h | 588 --- .../6LoWPAN/Bootstraps/Generic/network_lib.c | 147 - .../Bootstraps/Generic/protocol_6lowpan.c | 878 ----- .../Generic/protocol_6lowpan_bootstrap.c | 2841 -------------- .../Generic/protocol_6lowpan_interface.c | 184 - .../source/6LoWPAN/Bootstraps/network_lib.h | 27 - .../6LoWPAN/Bootstraps/protocol_6lowpan.h | 81 - .../Bootstraps/protocol_6lowpan_bootstrap.h | 103 - .../Bootstraps/protocol_6lowpan_interface.h | 37 - .../6LoWPAN/Fragmentation/cipv6_fragmenter.c | 541 --- .../6LoWPAN/Fragmentation/cipv6_fragmenter.h | 30 - .../source/6LoWPAN/IPHC_Decode/6lowpan_iphc.c | 248 -- .../source/6LoWPAN/IPHC_Decode/cipv6.h | 184 - .../6LoWPAN/IPHC_Decode/iphc_compress.c | 613 --- .../6LoWPAN/IPHC_Decode/iphc_compress.h | 22 - .../6LoWPAN/IPHC_Decode/iphc_decompress.c | 613 --- .../6LoWPAN/IPHC_Decode/iphc_decompress.h | 24 - .../6LoWPAN/IPHC_Decode/lowpan_context.c | 151 - .../6LoWPAN/IPHC_Decode/lowpan_context.h | 105 - .../source/6LoWPAN/MAC/beacon_handler.c | 417 -- .../source/6LoWPAN/MAC/beacon_handler.h | 49 - .../source/6LoWPAN/MAC/mac_data_poll.c | 559 --- .../source/6LoWPAN/MAC/mac_data_poll.h | 49 - .../source/6LoWPAN/MAC/mac_helper.c | 990 ----- .../source/6LoWPAN/MAC/mac_helper.h | 136 - .../source/6LoWPAN/MAC/mac_ie_lib.c | 185 - .../source/6LoWPAN/MAC/mac_ie_lib.h | 58 - .../source/6LoWPAN/MAC/mac_pairwise_key.c | 358 -- .../source/6LoWPAN/MAC/mac_pairwise_key.h | 39 - .../source/6LoWPAN/MAC/mac_response_handler.c | 261 -- .../source/6LoWPAN/MAC/mac_response_handler.h | 36 - .../source/6LoWPAN/MAC/mpx_api.h | 96 - .../source/6LoWPAN/Mesh/mesh.c | 470 --- .../source/6LoWPAN/Mesh/mesh.h | 84 - .../source/6LoWPAN/ND/nd_defines.h | 94 - .../source/6LoWPAN/ND/nd_router_object.c | 1764 --------- .../source/6LoWPAN/ND/nd_router_object.h | 133 - .../source/6LoWPAN/NVM/nwk_nvm.c | 148 - .../source/6LoWPAN/NVM/nwk_nvm.h | 48 - .../source/6LoWPAN/Thread/thread_bbr_api.c | 1231 ------ .../6LoWPAN/Thread/thread_bbr_api_internal.h | 139 - .../6LoWPAN/Thread/thread_bbr_commercial.c | 1567 -------- .../6LoWPAN/Thread/thread_bbr_commercial.h | 86 - .../source/6LoWPAN/Thread/thread_beacon.c | 72 - .../source/6LoWPAN/Thread/thread_beacon.h | 60 - .../source/6LoWPAN/Thread/thread_bootstrap.c | 3478 ----------------- .../source/6LoWPAN/Thread/thread_bootstrap.h | 232 -- .../6LoWPAN/Thread/thread_border_router_api.c | 1169 ------ .../thread_border_router_api_internal.h | 106 - .../source/6LoWPAN/Thread/thread_ccm.c | 801 ---- .../source/6LoWPAN/Thread/thread_ccm.h | 81 - .../6LoWPAN/Thread/thread_commissioning_api.c | 1229 ------ .../6LoWPAN/Thread/thread_commissioning_if.c | 126 - .../6LoWPAN/Thread/thread_commissioning_if.h | 87 - .../source/6LoWPAN/Thread/thread_common.c | 2278 ----------- .../source/6LoWPAN/Thread/thread_common.h | 529 --- .../source/6LoWPAN/Thread/thread_config.h | 372 -- .../source/6LoWPAN/Thread/thread_constants.h | 277 -- .../6LoWPAN/Thread/thread_dhcpv6_server.c | 114 - .../6LoWPAN/Thread/thread_dhcpv6_server.h | 39 - .../source/6LoWPAN/Thread/thread_diagnostic.c | 579 --- .../source/6LoWPAN/Thread/thread_diagnostic.h | 50 - .../source/6LoWPAN/Thread/thread_discovery.c | 1498 ------- .../source/6LoWPAN/Thread/thread_discovery.h | 152 - .../6LoWPAN/Thread/thread_host_bootstrap.c | 1301 ------ .../6LoWPAN/Thread/thread_host_bootstrap.h | 53 - .../Thread/thread_joiner_application.c | 2072 ---------- .../Thread/thread_joiner_application.h | 402 -- .../6LoWPAN/Thread/thread_leader_service.c | 1842 --------- .../6LoWPAN/Thread/thread_leader_service.h | 170 - .../6LoWPAN/Thread/thread_lowpower_api.c | 619 --- .../Thread/thread_lowpower_private_api.c | 62 - .../Thread/thread_lowpower_private_api.h | 110 - .../6LoWPAN/Thread/thread_management_api.c | 565 --- .../6LoWPAN/Thread/thread_management_client.c | 692 ---- .../6LoWPAN/Thread/thread_management_client.h | 250 -- .../6LoWPAN/Thread/thread_management_if.c | 1436 ------- .../Thread/thread_management_internal.h | 109 - .../6LoWPAN/Thread/thread_management_server.c | 2088 ---------- .../6LoWPAN/Thread/thread_management_server.h | 147 - .../source/6LoWPAN/Thread/thread_mdns.c | 357 -- .../source/6LoWPAN/Thread/thread_mdns.h | 64 - .../6LoWPAN/Thread/thread_meshcop_lib.c | 553 --- .../Thread/thread_mle_message_handler.c | 910 ----- .../Thread/thread_mle_message_handler.h | 35 - .../source/6LoWPAN/Thread/thread_nd.c | 637 --- .../source/6LoWPAN/Thread/thread_nd.h | 84 - .../6LoWPAN/Thread/thread_neighbor_class.c | 209 - .../6LoWPAN/Thread/thread_neighbor_class.h | 73 - .../6LoWPAN/Thread/thread_net_config_api.c | 46 - .../6LoWPAN/Thread/thread_network_data_lib.c | 234 -- .../6LoWPAN/Thread/thread_network_data_lib.h | 131 - .../Thread/thread_network_data_storage.c | 2499 ------------ .../Thread/thread_network_data_storage.h | 361 -- .../6LoWPAN/Thread/thread_network_synch.c | 303 -- .../6LoWPAN/Thread/thread_network_synch.h | 64 - .../source/6LoWPAN/Thread/thread_nvm_store.c | 554 --- .../source/6LoWPAN/Thread/thread_nvm_store.h | 125 - .../6LoWPAN/Thread/thread_resolution_client.c | 477 --- .../6LoWPAN/Thread/thread_resolution_client.h | 163 - .../6LoWPAN/Thread/thread_resolution_server.c | 202 - .../6LoWPAN/Thread/thread_resolution_server.h | 94 - .../6LoWPAN/Thread/thread_router_bootstrap.c | 2895 -------------- .../6LoWPAN/Thread/thread_router_bootstrap.h | 115 - .../source/6LoWPAN/Thread/thread_routing.c | 1144 ------ .../source/6LoWPAN/Thread/thread_routing.h | 260 -- .../source/6LoWPAN/Thread/thread_test_api.c | 1430 ------- .../source/6LoWPAN/Thread/thread_tmfcop_lib.h | 202 - .../source/6LoWPAN/adaptation_interface.c | 1502 ------- .../6LoWPAN/lowpan_adaptation_interface.h | 60 - .../source/6LoWPAN/ws/ws_bbr_api.c | 1071 ----- .../source/6LoWPAN/ws/ws_bbr_api_internal.h | 50 - .../source/6LoWPAN/ws/ws_bootstrap.c | 3460 ---------------- .../source/6LoWPAN/ws/ws_bootstrap.h | 103 - .../source/6LoWPAN/ws/ws_cfg_settings.c | 1278 ------ .../source/6LoWPAN/ws/ws_cfg_settings.h | 190 - .../source/6LoWPAN/ws/ws_common.c | 464 --- .../source/6LoWPAN/ws/ws_common.h | 167 - .../source/6LoWPAN/ws/ws_common_defines.h | 353 -- .../source/6LoWPAN/ws/ws_config.h | 264 -- .../source/6LoWPAN/ws/ws_eapol_auth_relay.c | 205 - .../source/6LoWPAN/ws/ws_eapol_auth_relay.h | 64 - .../source/6LoWPAN/ws/ws_eapol_pdu.c | 339 -- .../source/6LoWPAN/ws/ws_eapol_pdu.h | 164 - .../source/6LoWPAN/ws/ws_eapol_relay.c | 194 - .../source/6LoWPAN/ws/ws_eapol_relay.h | 70 - .../source/6LoWPAN/ws/ws_eapol_relay_lib.c | 53 - .../source/6LoWPAN/ws/ws_eapol_relay_lib.h | 23 - .../source/6LoWPAN/ws/ws_empty_functions.c | 401 -- .../source/6LoWPAN/ws/ws_ie_lib.c | 634 --- .../source/6LoWPAN/ws/ws_ie_lib.h | 66 - .../source/6LoWPAN/ws/ws_llc.h | 235 -- .../source/6LoWPAN/ws/ws_llc_data_service.c | 1709 -------- .../source/6LoWPAN/ws/ws_management_api.c | 734 ---- .../source/6LoWPAN/ws/ws_mpx_header.c | 146 - .../source/6LoWPAN/ws/ws_mpx_header.h | 41 - .../source/6LoWPAN/ws/ws_neighbor_class.c | 353 -- .../source/6LoWPAN/ws/ws_neighbor_class.h | 187 - .../source/6LoWPAN/ws/ws_pae_auth.c | 1157 ------ .../source/6LoWPAN/ws/ws_pae_auth.h | 262 -- .../source/6LoWPAN/ws/ws_pae_controller.c | 1527 -------- .../source/6LoWPAN/ws/ws_pae_controller.h | 598 --- .../source/6LoWPAN/ws/ws_pae_key_storage.c | 1002 ----- .../source/6LoWPAN/ws/ws_pae_key_storage.h | 164 - .../source/6LoWPAN/ws/ws_pae_lib.c | 438 --- .../source/6LoWPAN/ws/ws_pae_lib.h | 379 -- .../source/6LoWPAN/ws/ws_pae_nvm_data.c | 407 -- .../source/6LoWPAN/ws/ws_pae_nvm_data.h | 191 - .../source/6LoWPAN/ws/ws_pae_nvm_store.c | 175 - .../source/6LoWPAN/ws/ws_pae_nvm_store.h | 85 - .../source/6LoWPAN/ws/ws_pae_supp.c | 1274 ------ .../source/6LoWPAN/ws/ws_pae_supp.h | 267 -- .../source/6LoWPAN/ws/ws_pae_time.c | 190 - .../source/6LoWPAN/ws/ws_pae_time.h | 116 - .../source/6LoWPAN/ws/ws_pae_timers.c | 174 - .../source/6LoWPAN/ws/ws_pae_timers.h | 87 - .../source/6LoWPAN/ws/ws_stats.c | 70 - .../source/6LoWPAN/ws/ws_stats.h | 32 - .../source/6LoWPAN/ws/ws_test_api.c | 153 - .../source/BorderRouter/border_router.c | 836 ---- .../source/BorderRouter/border_router.h | 42 - .../source/Common_Protocols/icmpv6.c | 1786 --------- .../source/Common_Protocols/icmpv6.h | 157 - .../source/Common_Protocols/icmpv6_prefix.c | 76 - .../source/Common_Protocols/icmpv6_prefix.h | 55 - .../source/Common_Protocols/icmpv6_radv.c | 393 -- .../source/Common_Protocols/icmpv6_radv.h | 61 - .../source/Common_Protocols/ip.h | 57 - .../source/Common_Protocols/ipv6.c | 1448 ------- .../source/Common_Protocols/ipv6.h | 78 - .../source/Common_Protocols/ipv6_constants.h | 88 - .../source/Common_Protocols/ipv6_flow.c | 90 - .../source/Common_Protocols/ipv6_flow.h | 37 - .../Common_Protocols/ipv6_fragmentation.c | 740 ---- .../Common_Protocols/ipv6_fragmentation.h | 64 - .../source/Common_Protocols/ipv6_resolution.c | 255 -- .../source/Common_Protocols/ipv6_resolution.h | 39 - .../source/Common_Protocols/mld.c | 388 -- .../source/Common_Protocols/mld.h | 44 - .../source/Common_Protocols/tcp.c | 1745 --------- .../source/Common_Protocols/tcp.h | 157 - .../source/Common_Protocols/udp.c | 198 - .../source/Common_Protocols/udp.h | 31 - .../source/Core/buffer_dyn.c | 365 -- .../source/Core/include/ns_address_internal.h | 229 -- .../source/Core/include/ns_buffer.h | 407 -- .../source/Core/include/ns_error_types.h | 32 - .../source/Core/include/ns_monitor.h | 44 - .../source/Core/include/ns_socket.h | 238 -- .../source/Core/include/sockbuf.h | 44 - .../source/Core/ns_address_internal.c | 1471 ------- .../source/Core/ns_monitor.c | 221 -- .../source/Core/ns_socket.c | 1554 -------- .../sal-stack-nanostack/source/Core/sockbuf.c | 167 - .../DHCPv6_Server/DHCPv6_Server_service.c | 457 --- .../DHCPv6_Server/DHCPv6_server_service.h | 95 - .../source/DHCPv6_client/dhcpv6_client_api.h | 106 - .../DHCPv6_client/dhcpv6_client_service.c | 628 --- .../source/MAC/IEEE802_15_4/.gitignore | 2 - .../MAC/IEEE802_15_4/mac_cca_threshold.c | 142 - .../MAC/IEEE802_15_4/mac_cca_threshold.h | 65 - .../source/MAC/IEEE802_15_4/mac_data_buffer.h | 107 - .../source/MAC/IEEE802_15_4/mac_defines.h | 324 -- .../MAC/IEEE802_15_4/mac_fhss_callbacks.c | 165 - .../MAC/IEEE802_15_4/mac_fhss_callbacks.h | 32 - .../source/MAC/IEEE802_15_4/mac_filter.c | 391 -- .../source/MAC/IEEE802_15_4/mac_filter.h | 46 - .../mac_header_helper_functions.c | 785 ---- .../mac_header_helper_functions.h | 80 - .../MAC/IEEE802_15_4/mac_indirect_data.c | 242 -- .../MAC/IEEE802_15_4/mac_indirect_data.h | 37 - .../source/MAC/IEEE802_15_4/mac_mcps_sap.c | 2405 ------------ .../source/MAC/IEEE802_15_4/mac_mcps_sap.h | 148 - .../source/MAC/IEEE802_15_4/mac_mlme.c | 1848 --------- .../source/MAC/IEEE802_15_4/mac_mlme.h | 125 - .../source/MAC/IEEE802_15_4/mac_pd_sap.c | 989 ----- .../source/MAC/IEEE802_15_4/mac_pd_sap.h | 62 - .../MAC/IEEE802_15_4/mac_security_mib.c | 664 ---- .../MAC/IEEE802_15_4/mac_security_mib.h | 82 - .../source/MAC/IEEE802_15_4/mac_timer.c | 77 - .../source/MAC/IEEE802_15_4/mac_timer.h | 29 - .../source/MAC/IEEE802_15_4/sw_mac.c | 769 ---- .../source/MAC/IEEE802_15_4/sw_mac_internal.h | 64 - .../source/MAC/ethernet/ethernet_mac_api.c | 418 -- .../source/MAC/rf_driver_storage.c | 203 - .../source/MAC/rf_driver_storage.h | 119 - .../source/MAC/serial/serial_mac_api.c | 372 -- .../source/MAC/virtual_rf/virtual_rf_client.c | 172 - .../MAC/virtual_rf/virtual_rf_defines.h | 28 - .../source/MAC/virtual_rf/virtual_rf_driver.c | 322 -- .../sal-stack-nanostack/source/MLE/.gitignore | 1 - .../sal-stack-nanostack/source/MLE/mle.c | 168 - .../sal-stack-nanostack/source/MLE/mle.h | 148 - .../sal-stack-nanostack/source/MLE/mle_tlv.c | 367 -- .../sal-stack-nanostack/source/MLE/mle_tlv.h | 133 - .../sal-stack-nanostack/source/MPL/mpl.c | 1157 ------ .../sal-stack-nanostack/source/MPL/mpl.h | 62 - .../source/NWK_INTERFACE/Include/protocol.h | 523 --- .../NWK_INTERFACE/Include/protocol_abstract.h | 49 - .../NWK_INTERFACE/Include/protocol_stats.h | 55 - .../NWK_INTERFACE/Include/protocol_timer.h | 45 - .../source/NWK_INTERFACE/protocol_core.c | 1209 ------ .../NWK_INTERFACE/protocol_core_sleep.c | 121 - .../source/NWK_INTERFACE/protocol_stats.c | 159 - .../source/NWK_INTERFACE/protocol_timer.c | 193 - .../source/RPL/rpl_control.c | 1933 --------- .../source/RPL/rpl_control.h | 216 - .../sal-stack-nanostack/source/RPL/rpl_data.c | 1207 ------ .../sal-stack-nanostack/source/RPL/rpl_data.h | 48 - .../source/RPL/rpl_downward.c | 1976 ---------- .../source/RPL/rpl_downward.h | 63 - .../source/RPL/rpl_mrhof.c | 441 --- .../source/RPL/rpl_mrhof.h | 23 - .../source/RPL/rpl_objective.c | 42 - .../source/RPL/rpl_objective.h | 46 - .../sal-stack-nanostack/source/RPL/rpl_of0.c | 463 --- .../sal-stack-nanostack/source/RPL/rpl_of0.h | 23 - .../source/RPL/rpl_policy.c | 458 --- .../source/RPL/rpl_policy.h | 79 - .../source/RPL/rpl_protocol.h | 87 - .../source/RPL/rpl_structures.h | 211 - .../source/RPL/rpl_upward.c | 2055 ---------- .../source/RPL/rpl_upward.h | 159 - .../source/Security/Common/sec_lib.h | 73 - .../Security/Common/sec_lib_definitions.h | 356 -- .../source/Security/Common/security_lib.c | 1283 ------ .../source/Security/PANA/eap_protocol.c | 599 --- .../source/Security/PANA/eap_protocol.h | 30 - .../source/Security/PANA/pana.c | 1064 ----- .../source/Security/PANA/pana.h | 80 - .../source/Security/PANA/pana_avp.c | 132 - .../source/Security/PANA/pana_avp.h | 86 - .../source/Security/PANA/pana_client.c | 1134 ------ .../source/Security/PANA/pana_eap_header.c | 129 - .../source/Security/PANA/pana_eap_header.h | 78 - .../source/Security/PANA/pana_header.c | 63 - .../source/Security/PANA/pana_header.h | 61 - .../source/Security/PANA/pana_internal_api.h | 105 - .../source/Security/PANA/pana_nvm.h | 27 - .../source/Security/PANA/pana_relay_table.c | 143 - .../source/Security/PANA/pana_relay_table.h | 35 - .../source/Security/PANA/pana_server.c | 1763 --------- .../source/Security/TLS/tls_ccm_crypt.c | 101 - .../source/Security/TLS/tls_ccm_crypt.h | 24 - .../source/Security/TLS/tls_lib.c | 2445 ------------ .../source/Security/TLS/tls_lib.h | 85 - .../source/Security/eapol/eapol_helper.c | 298 -- .../source/Security/eapol/eapol_helper.h | 114 - .../source/Security/eapol/kde_helper.c | 244 -- .../source/Security/eapol/kde_helper.h | 172 - .../source/Security/kmp/kmp_addr.c | 95 - .../source/Security/kmp/kmp_addr.h | 89 - .../source/Security/kmp/kmp_api.c | 574 --- .../source/Security/kmp/kmp_api.h | 514 --- .../source/Security/kmp/kmp_eapol_pdu_if.c | 196 - .../source/Security/kmp/kmp_eapol_pdu_if.h | 62 - .../source/Security/kmp/kmp_socket_if.c | 199 - .../source/Security/kmp/kmp_socket_if.h | 57 - .../eap_tls_sec_prot/auth_eap_tls_sec_prot.c | 578 --- .../eap_tls_sec_prot/auth_eap_tls_sec_prot.h | 58 - .../eap_tls_sec_prot/eap_tls_sec_prot_lib.c | 260 -- .../eap_tls_sec_prot/eap_tls_sec_prot_lib.h | 135 - .../eap_tls_sec_prot/supp_eap_tls_sec_prot.c | 553 --- .../eap_tls_sec_prot/supp_eap_tls_sec_prot.h | 37 - .../fwh_sec_prot/auth_fwh_sec_prot.c | 462 --- .../fwh_sec_prot/auth_fwh_sec_prot.h | 59 - .../fwh_sec_prot/supp_fwh_sec_prot.c | 585 --- .../fwh_sec_prot/supp_fwh_sec_prot.h | 37 - .../gkh_sec_prot/auth_gkh_sec_prot.c | 347 -- .../gkh_sec_prot/auth_gkh_sec_prot.h | 53 - .../gkh_sec_prot/supp_gkh_sec_prot.c | 323 -- .../gkh_sec_prot/supp_gkh_sec_prot.h | 31 - .../protocols/key_sec_prot/key_sec_prot.c | 434 -- .../protocols/key_sec_prot/key_sec_prot.h | 48 - .../source/Security/protocols/sec_prot.h | 277 -- .../Security/protocols/sec_prot_certs.c | 284 -- .../Security/protocols/sec_prot_certs.h | 302 -- .../source/Security/protocols/sec_prot_cfg.h | 46 - .../source/Security/protocols/sec_prot_keys.c | 987 ----- .../source/Security/protocols/sec_prot_keys.h | 943 ----- .../source/Security/protocols/sec_prot_lib.c | 540 --- .../source/Security/protocols/sec_prot_lib.h | 307 -- .../protocols/tls_sec_prot/tls_sec_prot.c | 740 ---- .../protocols/tls_sec_prot/tls_sec_prot.h | 55 - .../protocols/tls_sec_prot/tls_sec_prot_lib.c | 692 ---- .../protocols/tls_sec_prot/tls_sec_prot_lib.h | 169 - .../Service_Libs/CCM_lib/ccm_security.c | 342 -- .../Service_Libs/CCM_lib/mbedOS/aes_mbedtls.c | 363 -- .../CCM_lib/mbedOS/aes_mbedtls_adapter.c | 104 - .../Neighbor_cache/neighbor_cache.c | 280 -- .../neighbor_table_definition.h | 278 -- .../source/Service_Libs/README.txt | 1 - .../source/Service_Libs/SHA256_Lib/Makefile | 4 - .../Service_Libs/SHA256_Lib/ns_sha256.c | 284 -- .../source/Service_Libs/SHA256_Lib/shalib.c | 127 - .../source/Service_Libs/Trickle/trickle.c | 155 - .../source/Service_Libs/Trickle/trickle.h | 85 - .../source/Service_Libs/blacklist/blacklist.c | 294 -- .../source/Service_Libs/blacklist/blacklist.h | 56 - .../source/Service_Libs/etx/etx.c | 860 ---- .../source/Service_Libs/etx/etx.h | 292 -- .../Service_Libs/fhss/channel_functions.c | 230 -- .../Service_Libs/fhss/channel_functions.h | 77 - .../source/Service_Libs/fhss/channel_list.c | 116 - .../source/Service_Libs/fhss/channel_list.h | 57 - .../source/Service_Libs/fhss/fhss.c | 1443 ------- .../source/Service_Libs/fhss/fhss.h | 120 - .../source/Service_Libs/fhss/fhss_channel.c | 296 -- .../source/Service_Libs/fhss/fhss_channel.h | 41 - .../source/Service_Libs/fhss/fhss_common.c | 291 -- .../source/Service_Libs/fhss/fhss_common.h | 80 - .../fhss/fhss_configuration_interface.c | 150 - .../Service_Libs/fhss/fhss_statistics.c | 58 - .../Service_Libs/fhss/fhss_statistics.h | 33 - .../source/Service_Libs/fhss/fhss_test_api.c | 61 - .../source/Service_Libs/fhss/fhss_ws.c | 1033 ----- .../source/Service_Libs/fhss/fhss_ws.h | 58 - .../fhss/fhss_ws_empty_functions.c | 84 - .../source/Service_Libs/fnv_hash/fnv_hash.c | 49 - .../source/Service_Libs/fnv_hash/fnv_hash.h | 31 - .../source/Service_Libs/hmac/hmac_sha1.c | 86 - .../source/Service_Libs/hmac/hmac_sha1.h | 39 - .../Service_Libs/ieee_802_11/ieee_802_11.c | 77 - .../Service_Libs/ieee_802_11/ieee_802_11.h | 129 - .../Service_Libs/load_balance/load_balance.c | 594 --- .../load_balance/load_balance_api.h | 241 -- .../mac_neighbor_table/mac_neighbor_table.c | 285 -- .../mac_neighbor_table/mac_neighbor_table.h | 207 - .../source/Service_Libs/mdns/README.txt | 16 - .../Service_Libs/mdns/fnet/fnet_license.txt | 204 - .../Service_Libs/mdns/fnet/fnet_stack/fnet.h | 82 - .../mdns/fnet/fnet_stack/fnet_config.h | 54 - .../fnet/fnet_stack/port/compiler/fnet_comp.h | 128 - .../port/compiler/fnet_comp_config.h | 135 - .../mdns/fnet/fnet_stack/port/cpu/fnet_cpu.h | 437 --- .../fnet/fnet_stack/services/dns/fnet_dns.h | 205 - .../fnet_stack/services/dns/fnet_dns_config.h | 87 - .../fnet_stack/services/dns/fnet_dns_prv.h | 180 - .../fnet/fnet_stack/services/fnet_services.h | 52 - .../services/fnet_services_config.h | 66 - .../fnet/fnet_stack/services/mdns/fnet_mdns.c | 2781 ------------- .../fnet/fnet_stack/services/mdns/fnet_mdns.h | 226 -- .../services/mdns/fnet_mdns_config.h | 92 - .../fnet/fnet_stack/services/poll/fnet_poll.c | 115 - .../fnet/fnet_stack/services/poll/fnet_poll.h | 140 - .../fnet_stack/services/serial/fnet_serial.h | 642 --- .../services/serial/fnet_serial_config.h | 57 - .../mdns/fnet/fnet_stack/stack/fnet_arp.h | 128 - .../mdns/fnet/fnet_stack/stack/fnet_assert.h | 44 - .../mdns/fnet/fnet_stack/stack/fnet_debug.h | 69 - .../mdns/fnet/fnet_stack/stack/fnet_error.h | 232 -- .../mdns/fnet/fnet_stack/stack/fnet_eth.h | 129 - .../mdns/fnet/fnet_stack/stack/fnet_icmp6.h | 159 - .../mdns/fnet/fnet_stack/stack/fnet_inet.h | 216 - .../mdns/fnet/fnet_stack/stack/fnet_ip.h | 139 - .../mdns/fnet/fnet_stack/stack/fnet_ip6.h | 124 - .../mdns/fnet/fnet_stack/stack/fnet_isr.h | 66 - .../mdns/fnet/fnet_stack/stack/fnet_mempool.h | 75 - .../mdns/fnet/fnet_stack/stack/fnet_nd6.h | 736 ---- .../mdns/fnet/fnet_stack/stack/fnet_netbuf.h | 123 - .../mdns/fnet/fnet_stack/stack/fnet_netif.h | 1065 ----- .../fnet/fnet_stack/stack/fnet_netif_prv.h | 224 -- .../mdns/fnet/fnet_stack/stack/fnet_socket.h | 1456 ------- .../mdns/fnet/fnet_stack/stack/fnet_stack.h | 174 - .../fnet/fnet_stack/stack/fnet_stack_config.h | 849 ---- .../mdns/fnet/fnet_stack/stack/fnet_stdlib.c | 779 ---- .../mdns/fnet/fnet_stack/stack/fnet_stdlib.h | 554 --- .../mdns/fnet/fnet_stack/stack/fnet_timer.h | 186 - .../fnet/fnet_stack/stack/fnet_timer_prv.h | 56 - .../source/Service_Libs/mdns/fnet/readme.txt | 69 - .../Service_Libs/mdns/fnet_user_config.h | 55 - .../source/Service_Libs/mdns/ns_fnet_events.c | 118 - .../source/Service_Libs/mdns/ns_fnet_events.h | 43 - .../source/Service_Libs/mdns/ns_fnet_port.c | 242 -- .../source/Service_Libs/mdns/ns_fnet_types.h | 35 - .../source/Service_Libs/mdns/ns_mdns_api.c | 238 -- .../Service_Libs/mle_service/mle_service.c | 1557 -------- .../mle_service/mle_service_api.h | 809 ---- .../mle_service/mle_service_buffer.c | 349 -- .../mle_service/mle_service_buffer.h | 306 -- .../mle_service_frame_counter_table.c | 155 - .../mle_service_frame_counter_table.h | 35 - .../mle_service/mle_service_interface.c | 103 - .../mle_service/mle_service_interface.h | 104 - .../mle_service/mle_service_security.c | 328 -- .../mle_service/mle_service_security.h | 190 - .../source/Service_Libs/nd_proxy/nd_proxy.c | 475 --- .../source/Service_Libs/nd_proxy/nd_proxy.h | 155 - .../Service_Libs/nist_aes_kw/nist_aes_kw.c | 124 - .../Service_Libs/nist_aes_kw/nist_aes_kw.h | 38 - .../pan_blacklist/pan_blacklist.c | 160 - .../pan_blacklist/pan_blacklist_api.h | 74 - .../source/Service_Libs/utils/isqrt.c | 51 - .../source/Service_Libs/utils/isqrt.h | 30 - .../source/Service_Libs/utils/ns_conf.c | 33 - .../source/Service_Libs/utils/ns_crc.c | 88 - .../source/Service_Libs/utils/ns_crc.h | 43 - .../source/Service_Libs/utils/ns_file.h | 110 - .../Service_Libs/utils/ns_file_system.c | 157 - .../Service_Libs/whiteboard/whiteboard.c | 266 -- .../Service_Libs/whiteboard/whiteboard.h | 45 - .../source/configs/base/cfg_ethernet.h | 22 - .../source/configs/base/cfg_local_socket.h | 18 - .../configs/base/cfg_lowpan_border_router.h | 26 - .../source/configs/base/cfg_lowpan_host.h | 21 - .../source/configs/base/cfg_lowpan_router.h | 22 - .../source/configs/base/cfg_rf_tunnel.h | 18 - .../configs/base/cfg_thread_border_router.h | 22 - .../configs/base/cfg_thread_end_device.h | 22 - .../configs/base/cfg_thread_full_end_device.h | 24 - .../source/configs/base/cfg_thread_router.h | 27 - .../configs/base/cfg_ws_border_router.h | 28 - .../source/configs/base/cfg_ws_router.h | 26 - .../source/configs/cfg_ethernet_host.h | 21 - .../source/configs/cfg_generic.h | 35 - .../source/configs/cfg_lowpan_border_router.h | 27 - .../cfg_lowpan_border_router_rf_tunnel.h | 31 - .../cfg_lowpan_border_router_rf_tunnel_ecc.h | 29 - ...wpan_border_router_rf_tunnel_ecc_release.h | 28 - .../source/configs/cfg_lowpan_host.h | 23 - .../source/configs/cfg_lowpan_router.h | 24 - .../source/configs/cfg_lowpan_router_ecc.h | 24 - .../configs/cfg_lowpan_router_ecc_release.h | 23 - .../source/configs/cfg_nanostack_full.h | 24 - .../source/configs/cfg_nanostack_full_debug.h | 22 - .../source/configs/cfg_rf_interface.h | 23 - .../source/configs/cfg_thread_border_router.h | 21 - .../source/configs/cfg_thread_end_device.h | 24 - .../configs/cfg_thread_full_end_device.h | 27 - .../source/configs/cfg_thread_router.h | 22 - .../source/configs/cfg_thread_thci.h | 24 - .../source/configs/cfg_ws_border_router.h | 25 - .../source/configs/cfg_ws_router.h | 23 - .../source/ipv6_stack/ipv6_routing_table.c | 1831 --------- .../source/ipv6_stack/ipv6_routing_table.h | 270 -- .../source/ipv6_stack/protocol_ipv6.c | 1019 ----- .../source/ipv6_stack/protocol_ipv6.h | 86 - .../source/libDHCPv6/dhcp_service_api.c | 951 ----- .../source/libDHCPv6/libDHCPv6.c | 919 ----- .../source/libDHCPv6/libDHCPv6.h | 384 -- .../source/libDHCPv6/libDHCPv6_server.c | 498 --- .../source/libDHCPv6/libDHCPv6_server.h | 115 - .../source/libNET/src/multicast_api.c | 456 --- .../libNET/src/net_6lowpan_parameter_api.c | 112 - .../source/libNET/src/net_ipv6.c | 75 - .../source/libNET/src/net_load_balance.c | 378 -- .../libNET/src/net_load_balance_internal.h | 24 - .../source/libNET/src/net_mle.c | 183 - .../source/libNET/src/net_rpl.c | 340 -- .../libNET/src/net_short_address_extension.c | 75 - .../source/libNET/src/net_test.c | 85 - .../source/libNET/src/ns_net.c | 1571 -------- .../source/libNET/src/socket_api.c | 1264 ------ .../sal-stack-nanostack/source/nsconfig.h | 59 - .../nanostack/sal-stack-nanostack/sources.mk | 219 -- 566 files changed, 196743 deletions(-) delete mode 100644 connectivity/nanostack/sal-stack-nanostack/.gitattributes delete mode 100644 connectivity/nanostack/sal-stack-nanostack/.gitignore delete mode 100644 connectivity/nanostack/sal-stack-nanostack/.mbedignore delete mode 100644 connectivity/nanostack/sal-stack-nanostack/DOXYGEN_FRONTPAGE.md delete mode 100644 connectivity/nanostack/sal-stack-nanostack/Doxyfile delete mode 100644 connectivity/nanostack/sal-stack-nanostack/LICENSE-Apache-2.0 delete mode 100644 connectivity/nanostack/sal-stack-nanostack/LICENSE-BSD-3-Clause delete mode 100644 connectivity/nanostack/sal-stack-nanostack/Makefile delete mode 100644 connectivity/nanostack/sal-stack-nanostack/NOTICE delete mode 100644 connectivity/nanostack/sal-stack-nanostack/README.md delete mode 100644 connectivity/nanostack/sal-stack-nanostack/doxygen/mainpage.dox delete mode 100644 connectivity/nanostack/sal-stack-nanostack/include_dirs.mk delete mode 100644 connectivity/nanostack/sal-stack-nanostack/mbed_lib.json delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/cca_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ccmLIB.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/dhcp_service_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ethernet_mac_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/fhss_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/fhss_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/fhss_test_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/fhss_ws_extension.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/mac_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/mac_common_defines.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/mac_filter_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/mac_mcps.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/mlme.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/multicast_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_6lowpan_parameter_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_address_extension.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_fhss.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_interface.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_ipv6_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_load_balance_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_mle_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_nvm_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_nwk_scan.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_pana_parameters_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_polling_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_rpl.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_sleep.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_test_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_thread_test.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/net_ws_test.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_address.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_conf.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_file_system.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_mdns_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_sha256.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_time_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ns_virtual_rf_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/nwk_stats_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/platform/arm_hal_aes.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/platform/arm_hal_phy.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/platform/os_whiteboard.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/platform/topo_trace.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/serial_mac_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/shalib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/socket_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/sw_mac.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_bbr_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_border_router_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_commissioning_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_dhcpv6_server.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_diagcop_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_lowpower_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_management_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_management_if.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_meshcop_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/thread_net_config_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/whiteboard_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ws_bbr_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/nanostack/ws_management_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/Generic/network_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/Generic/protocol_6lowpan.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/Generic/protocol_6lowpan_bootstrap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/Generic/protocol_6lowpan_interface.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/network_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/protocol_6lowpan.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/protocol_6lowpan_bootstrap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Bootstraps/protocol_6lowpan_interface.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Fragmentation/cipv6_fragmenter.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Fragmentation/cipv6_fragmenter.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/6lowpan_iphc.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/cipv6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/iphc_compress.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/iphc_compress.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/iphc_decompress.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/iphc_decompress.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/lowpan_context.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/IPHC_Decode/lowpan_context.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/beacon_handler.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/beacon_handler.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_data_poll.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_data_poll.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_helper.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_helper.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_ie_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_ie_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_pairwise_key.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_pairwise_key.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_response_handler.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mac_response_handler.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/MAC/mpx_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Mesh/mesh.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Mesh/mesh.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ND/nd_defines.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ND/nd_router_object.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ND/nd_router_object.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/NVM/nwk_nvm.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/NVM/nwk_nvm.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_bbr_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_bbr_api_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_bbr_commercial.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_bbr_commercial.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_beacon.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_beacon.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_bootstrap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_bootstrap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_border_router_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_border_router_api_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_ccm.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_ccm.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_commissioning_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_commissioning_if.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_commissioning_if.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_common.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_common.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_constants.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_dhcpv6_server.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_dhcpv6_server.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_diagnostic.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_diagnostic.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_discovery.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_discovery.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_host_bootstrap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_host_bootstrap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_joiner_application.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_joiner_application.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_leader_service.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_leader_service.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_lowpower_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_lowpower_private_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_lowpower_private_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_client.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_client.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_if.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_server.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_management_server.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_mdns.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_mdns.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_meshcop_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_mle_message_handler.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_mle_message_handler.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_nd.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_nd.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_neighbor_class.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_neighbor_class.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_net_config_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_network_data_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_network_data_lib.h delete mode 100755 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_network_data_storage.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_network_data_storage.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_network_synch.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_network_synch.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_nvm_store.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_nvm_store.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_resolution_client.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_resolution_client.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_resolution_server.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_resolution_server.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_router_bootstrap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_router_bootstrap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_routing.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_routing.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_test_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/Thread/thread_tmfcop_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/adaptation_interface.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/lowpan_adaptation_interface.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_bbr_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_bbr_api_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_bootstrap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_bootstrap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_cfg_settings.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_cfg_settings.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_common.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_common.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_common_defines.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_auth_relay.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_auth_relay.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_pdu.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_pdu.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_relay.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_relay.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_relay_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_eapol_relay_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_empty_functions.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_ie_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_ie_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_llc.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_llc_data_service.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_management_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_mpx_header.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_mpx_header.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_neighbor_class.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_neighbor_class.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_auth.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_auth.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_controller.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_controller.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_key_storage.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_key_storage.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_nvm_data.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_nvm_data.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_nvm_store.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_nvm_store.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_supp.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_supp.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_time.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_time.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_timers.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_pae_timers.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_stats.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_stats.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_test_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/BorderRouter/border_router.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/BorderRouter/border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/icmpv6.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/icmpv6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/icmpv6_prefix.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/icmpv6_prefix.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/icmpv6_radv.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/icmpv6_radv.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ip.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_constants.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_flow.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_flow.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_fragmentation.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_fragmentation.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_resolution.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/ipv6_resolution.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/mld.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/mld.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/tcp.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/tcp.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/udp.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Common_Protocols/udp.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/buffer_dyn.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/include/ns_address_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/include/ns_buffer.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/include/ns_error_types.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/include/ns_monitor.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/include/ns_socket.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/include/sockbuf.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/ns_address_internal.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/ns_monitor.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/ns_socket.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Core/sockbuf.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/DHCPv6_Server/DHCPv6_Server_service.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/DHCPv6_Server/DHCPv6_server_service.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/DHCPv6_client/dhcpv6_client_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/DHCPv6_client/dhcpv6_client_service.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/.gitignore delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_cca_threshold.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_cca_threshold.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_data_buffer.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_defines.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_fhss_callbacks.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_fhss_callbacks.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_filter.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_filter.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_header_helper_functions.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_header_helper_functions.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_indirect_data.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_indirect_data.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_mcps_sap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_mcps_sap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_mlme.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_mlme.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_pd_sap.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_pd_sap.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_security_mib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_security_mib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_timer.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/mac_timer.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/sw_mac.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/IEEE802_15_4/sw_mac_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/ethernet/ethernet_mac_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/rf_driver_storage.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/rf_driver_storage.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/serial/serial_mac_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/virtual_rf/virtual_rf_client.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/virtual_rf/virtual_rf_defines.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MAC/virtual_rf/virtual_rf_driver.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MLE/.gitignore delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MLE/mle.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MLE/mle.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MLE/mle_tlv.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MLE/mle_tlv.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MPL/mpl.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/MPL/mpl.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/Include/protocol.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/Include/protocol_abstract.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/Include/protocol_stats.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/Include/protocol_timer.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/protocol_core.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/protocol_core_sleep.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/protocol_stats.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/NWK_INTERFACE/protocol_timer.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_control.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_control.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_data.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_data.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_downward.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_downward.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_mrhof.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_mrhof.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_objective.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_objective.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_of0.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_of0.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_policy.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_policy.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_protocol.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_structures.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_upward.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/RPL/rpl_upward.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/Common/sec_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/Common/sec_lib_definitions.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/Common/security_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/eap_protocol.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/eap_protocol.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_avp.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_avp.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_client.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_eap_header.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_eap_header.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_header.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_header.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_internal_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_nvm.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_relay_table.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_relay_table.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/PANA/pana_server.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/TLS/tls_ccm_crypt.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/TLS/tls_ccm_crypt.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/TLS/tls_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/TLS/tls_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/eapol/eapol_helper.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/eapol/eapol_helper.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/eapol/kde_helper.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/eapol/kde_helper.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_addr.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_addr.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_eapol_pdu_if.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_eapol_pdu_if.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_socket_if.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/kmp/kmp_socket_if.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/eap_tls_sec_prot/auth_eap_tls_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/eap_tls_sec_prot/auth_eap_tls_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/eap_tls_sec_prot/eap_tls_sec_prot_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/eap_tls_sec_prot/eap_tls_sec_prot_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/eap_tls_sec_prot/supp_eap_tls_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/eap_tls_sec_prot/supp_eap_tls_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/fwh_sec_prot/auth_fwh_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/fwh_sec_prot/auth_fwh_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/fwh_sec_prot/supp_fwh_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/fwh_sec_prot/supp_fwh_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/gkh_sec_prot/auth_gkh_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/gkh_sec_prot/auth_gkh_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/gkh_sec_prot/supp_gkh_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/gkh_sec_prot/supp_gkh_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/key_sec_prot/key_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/key_sec_prot/key_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_certs.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_certs.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_cfg.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_keys.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_keys.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/sec_prot_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/tls_sec_prot/tls_sec_prot.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/tls_sec_prot/tls_sec_prot.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/tls_sec_prot/tls_sec_prot_lib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Security/protocols/tls_sec_prot/tls_sec_prot_lib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/CCM_lib/ccm_security.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/CCM_lib/mbedOS/aes_mbedtls.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/CCM_lib/mbedOS/aes_mbedtls_adapter.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/Neighbor_cache/neighbor_cache.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/Neighbor_cache/neighbor_table_definition.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/README.txt delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/SHA256_Lib/Makefile delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/SHA256_Lib/ns_sha256.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/SHA256_Lib/shalib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/Trickle/trickle.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/Trickle/trickle.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/blacklist/blacklist.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/blacklist/blacklist.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/etx/etx.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/etx/etx.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/channel_functions.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/channel_functions.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/channel_list.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/channel_list.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_channel.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_channel.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_common.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_common.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_configuration_interface.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_statistics.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_statistics.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_test_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_ws.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_ws.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fhss/fhss_ws_empty_functions.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fnv_hash/fnv_hash.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/fnv_hash/fnv_hash.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/hmac/hmac_sha1.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/hmac/hmac_sha1.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/ieee_802_11/ieee_802_11.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/ieee_802_11/ieee_802_11.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/load_balance/load_balance.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/load_balance/load_balance_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mac_neighbor_table/mac_neighbor_table.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mac_neighbor_table/mac_neighbor_table.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/README.txt delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_license.txt delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/fnet.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/fnet_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/port/compiler/fnet_comp.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/port/compiler/fnet_comp_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/port/cpu/fnet_cpu.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/dns/fnet_dns.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/dns/fnet_dns_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/dns/fnet_dns_prv.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/fnet_services.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/fnet_services_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/mdns/fnet_mdns.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/mdns/fnet_mdns.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/mdns/fnet_mdns_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/poll/fnet_poll.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/poll/fnet_poll.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/serial/fnet_serial.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/services/serial/fnet_serial_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_arp.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_assert.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_debug.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_error.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_eth.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_icmp6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_inet.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_ip.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_ip6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_isr.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_mempool.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_nd6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_netbuf.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_netif.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_netif_prv.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_socket.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_stack.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_stack_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_stdlib.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_stdlib.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_timer.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/fnet_stack/stack/fnet_timer_prv.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet/readme.txt delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet_user_config.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/ns_fnet_events.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/ns_fnet_events.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/ns_fnet_port.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/ns_fnet_types.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/ns_mdns_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_buffer.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_buffer.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_frame_counter_table.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_frame_counter_table.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_interface.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_interface.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_security.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/mle_service/mle_service_security.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/nd_proxy/nd_proxy.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/nd_proxy/nd_proxy.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/nist_aes_kw/nist_aes_kw.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/nist_aes_kw/nist_aes_kw.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/pan_blacklist/pan_blacklist.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/pan_blacklist/pan_blacklist_api.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/isqrt.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/isqrt.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/ns_conf.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/ns_crc.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/ns_crc.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/ns_file.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/utils/ns_file_system.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/whiteboard/whiteboard.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/Service_Libs/whiteboard/whiteboard.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_ethernet.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_local_socket.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_lowpan_border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_lowpan_host.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_lowpan_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_rf_tunnel.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_thread_border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_thread_end_device.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_thread_full_end_device.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_thread_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_ws_border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/base/cfg_ws_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_ethernet_host.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_generic.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_border_router_rf_tunnel.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_border_router_rf_tunnel_ecc.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_border_router_rf_tunnel_ecc_release.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_host.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_router_ecc.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_lowpan_router_ecc_release.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_nanostack_full.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_nanostack_full_debug.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_rf_interface.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_thread_border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_thread_end_device.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_thread_full_end_device.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_thread_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_thread_thci.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_ws_border_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/configs/cfg_ws_router.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/ipv6_stack/ipv6_routing_table.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/ipv6_stack/ipv6_routing_table.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/ipv6_stack/protocol_ipv6.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/ipv6_stack/protocol_ipv6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libDHCPv6/dhcp_service_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libDHCPv6/libDHCPv6.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libDHCPv6/libDHCPv6.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libDHCPv6/libDHCPv6_server.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libDHCPv6/libDHCPv6_server.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/multicast_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_6lowpan_parameter_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_ipv6.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_load_balance.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_load_balance_internal.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_mle.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_rpl.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_short_address_extension.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/net_test.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/ns_net.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/libNET/src/socket_api.c delete mode 100644 connectivity/nanostack/sal-stack-nanostack/source/nsconfig.h delete mode 100644 connectivity/nanostack/sal-stack-nanostack/sources.mk diff --git a/connectivity/nanostack/sal-stack-nanostack/.gitattributes b/connectivity/nanostack/sal-stack-nanostack/.gitattributes deleted file mode 100644 index d09921917c..0000000000 --- a/connectivity/nanostack/sal-stack-nanostack/.gitattributes +++ /dev/null @@ -1,3 +0,0 @@ -* text=auto -*.uvproj eol=lf -*.uvmpw eol=lf diff --git a/connectivity/nanostack/sal-stack-nanostack/.gitignore b/connectivity/nanostack/sal-stack-nanostack/.gitignore deleted file mode 100644 index 0730e7a544..0000000000 --- a/connectivity/nanostack/sal-stack-nanostack/.gitignore +++ /dev/null @@ -1,71 +0,0 @@ -.settings/ -*.dep -*.htm -*.crf -*.ewd -*.ewt -bin/ -*Debug/ -*DEBUG/ -*_debug/ -gcov/ -*Release/ -*RELEASE/ -*_release/ -riliisi/ -/output/ -Output/ -objs/ -path.txt -jlink.config -settings/ -*.bin -*.hex -*.elf -*.srec -*.eep -*.o -*.d -*.a -*.zip -*.tmp -Backup * -*.__i -*.pbi -*.cout -*.pbd.* -*.pbd -*.lst -*.Scr -*.uvgui.* -*.uvgui_* -*.log -*.lss -*.map -*.lib -*.uvopt -*.sim -*.out -*.atsuo -*.s37 -*.S37 -*.r43 -*.r90 -.tags_sorted_by_file -cscope.files -.tags -*~ -*.c.orig -*.h.orig -*.axf -*.iex -*.sct -*.lnp -*.ini -!debugger.ini -*Log.txt -*.mpw -build -html -site - diff --git a/connectivity/nanostack/sal-stack-nanostack/.mbedignore b/connectivity/nanostack/sal-stack-nanostack/.mbedignore deleted file mode 100644 index 012fd89ab6..0000000000 --- a/connectivity/nanostack/sal-stack-nanostack/.mbedignore +++ /dev/null @@ -1,5 +0,0 @@ -test/* -unittest/* -release/* -source/Service_Libs/CCM_lib/mbedOS/aes_mbedtls.c -output/* diff --git a/connectivity/nanostack/sal-stack-nanostack/DOXYGEN_FRONTPAGE.md b/connectivity/nanostack/sal-stack-nanostack/DOXYGEN_FRONTPAGE.md deleted file mode 100644 index a97e411e38..0000000000 --- a/connectivity/nanostack/sal-stack-nanostack/DOXYGEN_FRONTPAGE.md +++ /dev/null @@ -1,11 +0,0 @@ -ARM mbed Networking Stack -========================= - -## Introduction -This is Doxygen generated documentation of Nanostack. -It should be used in conjunction with [ARM mbed Networking Stack](https://docs.mbed.com/docs/arm-ipv66lowpan-stack/en/latest/) manual -hosted in http://docs.mbed.com - -# API documentation - -See [Files](files.html) section to find a documentation about specific api. diff --git a/connectivity/nanostack/sal-stack-nanostack/Doxyfile b/connectivity/nanostack/sal-stack-nanostack/Doxyfile deleted file mode 100644 index 71d397e99a..0000000000 --- a/connectivity/nanostack/sal-stack-nanostack/Doxyfile +++ /dev/null @@ -1,2332 +0,0 @@ -# Doxyfile 1.8.8 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "Nanostack" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = "ARM 6LoWPAN/Thread/IPv6 Stack." - -# With the PROJECT_LOGO tag one can specify an logo or icon that is included in -# the documentation. The maximum height of the logo should not exceed 55 pixels -# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo -# to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -# ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a -# new page for each member. If set to NO, the documentation of a member will be -# part of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = YES - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by by putting a % sign in front of the word -# or globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = YES - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. Private -# class members and static file members will be hidden unless the -# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. -# Note: This will also disable the warnings about undocumented members that are -# normally produced when WARNINGS is set to YES. -# The default value is: NO. - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file will be -# included in the documentation. -# The default value is: NO. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO these classes will be included in the various overviews. This option has -# no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO these declarations will be -# included in the documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. -# The default value is: system dependent. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = YES - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the -# (detailed) documentation of file and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. -# The default value is: YES. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by -# fully-qualified names, including namespaces. If set to NO, the class list will -# be sorted only by class name, not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the alphabetical -# list. -# The default value is: NO. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the -# todo list. This list is created by putting \todo commands in the -# documentation. -# The default value is: YES. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the -# test list. This list is created by putting \test commands in the -# documentation. -# The default value is: YES. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if ... \endif and \cond -# ... \endcond blocks. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES the list -# will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This -# will remove the Files entry from the Quick Index and from the Folder Tree View -# (if specified). -# The default value is: YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces -# page. This will remove the Namespaces entry from the Quick Index and from the -# Folder Tree View (if specified). -# The default value is: YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# Configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO doxygen will only warn about wrong or incomplete parameter -# documentation, but not about the absence of documentation. -# The default value is: NO. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning and error -# messages should be written. If left blank the output is written to standard -# error (stderr). - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# Configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag is used to specify the files and/or directories that contain -# documented source files. You may enter file names like myfile.cpp or -# directories like /usr/src/myproject. Separate the files or directories with -# spaces. -# Note: If this tag is empty the current directory is searched. - -INPUT = nanostack doxygen - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses -# libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. -# The default value is: UTF-8. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to specify whether or not subdirectories should -# be searched for input files as well. -# The default value is: NO. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. -# The default value is: NO. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or directories -# that contain example code fragments that are included (see the \include -# command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank all -# files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude commands -# irrespective of the value of the RECURSIVE tag. -# The default value is: NO. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or directories -# that contain images that are to be included in the documentation (see the -# \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command: -# -# -# -# where is the value of the INPUT_FILTER tag, and is the -# name of an input file. Doxygen will then use the output that the filter -# program writes to standard output. If FILTER_PATTERNS is specified, this tag -# will be ignored. -# -# Note that the filter must not add or remove lines; it is applied before the -# code is scanned, but not when the output code is generated. If lines are added -# or removed, the anchors will not be placed correctly. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: pattern=filter -# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how -# filters are used. If the FILTER_PATTERNS tag is empty or if none of the -# patterns match the file name, INPUT_FILTER is applied. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER ) will also be used to filter the input files that are used for -# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). -# The default value is: NO. - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and -# it is also possible to disable source filtering for a specific pattern using -# *.ext= (so without naming a filter). -# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. - -FILTER_SOURCE_PATTERNS = - -# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page -# (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. - -USE_MDFILE_AS_MAINPAGE = - -#--------------------------------------------------------------------------- -# Configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will be -# generated. Documented entities will be cross-referenced with these sources. -# -# Note: To get rid of all source code in the generated output, make sure that -# also VERBATIM_HEADERS is set to NO. -# The default value is: NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. -# The default value is: NO. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any -# special comment blocks from generated source code fragments. Normal C, C++ and -# Fortran comments will always remain visible. -# The default value is: YES. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. -# The default value is: NO. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES then for each documented function -# all documented entities called/used by that function will be listed. -# The default value is: NO. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES, then the hyperlinks from functions in REFERENCES_RELATION and -# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will -# link to the documentation. -# The default value is: YES. - -REFERENCES_LINK_SOURCE = YES - -# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the -# source code will show a tooltip with additional information such as prototype, -# brief description and links to the definition and documentation. Since this -# will make the HTML file larger and loading of large files a bit slower, you -# can opt to disable this feature. -# The default value is: YES. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -SOURCE_TOOLTIPS = YES - -# If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in -# source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version -# 4.8.6 or higher. -# -# To use it do the following: -# - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file -# - Make sure the INPUT points to the root of the source tree -# - Run doxygen as normal -# -# Doxygen will invoke htags (and that will in turn invoke gtags), so these -# tools must be available from the command line (i.e. in the search path). -# -# The result: instead of the source browser generated by doxygen, the links to -# source code will now point to the output of htags. -# The default value is: NO. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a -# verbatim copy of the header file for each class for which an include is -# specified. Set to NO to disable this. -# See also: Section \class. -# The default value is: YES. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# Configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all -# compounds will be generated. Enable this if the project contains a lot of -# classes, structs, unions or interfaces. -# The default value is: YES. - -ALPHABETICAL_INDEX = YES - -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output -# The default value is: YES. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each -# generated HTML page (for example: .htm, .php, .asp). -# The default value is: .html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a -# standard header. -# -# To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. -# the setting GENERATE_TREEVIEW). It is highly recommended to start with a -# default header using -# doxygen -w html new_header.html new_footer.html new_stylesheet.css -# YourConfigFile -# and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally -# uses. -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description -# of the possible markers and block names see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard -# footer. See HTML_HEADER for more information on how to generate a default -# footer and what special commands can be used inside the footer. See also -# section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style -# sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. -# See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. -# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as -# it is more robust and this tag (HTML_STYLESHEET) will in the future become -# obsolete. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_STYLESHEET = - -# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. -# This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefor more robust against future updates. -# Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra stylesheet files is of importance (e.g. the last -# stylesheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that the -# files will be copied as-is; there are no commands or markers available. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the stylesheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value -# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 -# purple, and 360 is red again. -# Minimum value: 0, maximum value: 359, default value: 220. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A -# value of 255 will produce the most vivid colors. -# Minimum value: 0, maximum value: 255, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the -# luminance component of the colors in the HTML output. Values below 100 -# gradually make the output lighter, whereas values above 100 make the output -# darker. The value divided by 100 is the actual gamma applied, so 80 represents -# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not -# change the gamma. -# Minimum value: 40, maximum value: 240, default value: 80. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_DYNAMIC_SECTIONS = NO - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries -# shown in the various tree structured indices initially; the user can expand -# and collapse entries dynamically later on. Doxygen will expand the tree to -# such a level that at most the specified number of entries are visible (unless -# a fully collapsed tree already exceeds this amount). So setting the number of -# entries 1 will produce a full collapsed tree by default. 0 is a special value -# representing an infinite number of entries and will result in a full expanded -# tree by default. -# Minimum value: 0, maximum value: 9999, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files will be -# generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_DOCSET = NO - -# This tag determines the name of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# The default value is: Doxygen generated docs. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# This tag specifies a string that should uniquely identify the documentation -# set bundle. This should be a reverse domain-name style string, e.g. -# com.mycompany.MyDocSet. Doxygen will append .docset to the name. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. -# The default value is: org.doxygen.Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. -# The default value is: Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three -# additional HTML index files: index.hhp, index.hhc, and index.hhk. The -# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. -# -# The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML -# files are now used as the Windows 98 help format, and will replace the old -# Windows help format (.hlp) on all Windows platforms in the future. Compressed -# HTML files also contain an index, a table of contents, and you can search for -# words in the documentation. The HTML workshop also contains a viewer for -# compressed HTML files. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_HTMLHELP = NO - -# The CHM_FILE tag can be used to specify the file name of the resulting .chm -# file. You can add a path in front of the file if the result should not be -# written to the html output directory. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_FILE = - -# The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler ( hhc.exe). If non-empty -# doxygen will try to run the HTML help compiler on the generated index.hhp. -# The file has to be specified with full path. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -HHC_LOCATION = - -# The GENERATE_CHI flag controls if a separate .chi index file is generated ( -# YES) or that it should be included in the master .chm file ( NO). -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -GENERATE_CHI = NO - -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) -# and project file content. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_INDEX_ENCODING = - -# The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it -# enables the Previous and Next buttons. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members to -# the table of contents of the HTML help documentation and to the tree view. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that -# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help -# (.qch) of the generated HTML documentation. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify -# the file name of the resulting .qch file. The path specified is relative to -# the HTML output folder. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help -# Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt -# Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). -# The default value is: doc. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_VIRTUAL_FOLDER = doc - -# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom -# filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_SECT_FILTER_ATTRS = - -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be -# generated, together with the HTML files, they form an Eclipse help plugin. To -# install this plugin and make it available under the help contents menu in -# Eclipse, the contents of the directory containing the HTML and XML files needs -# to be copied into the plugins directory of eclipse. The name of the directory -# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. -# After copying Eclipse needs to be restarted before the help appears. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the Eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have this -# name. Each documentation set should have its own identifier. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# If you want full control over the layout of the generated HTML pages it might -# be necessary to disable the index and replace it with your own. The -# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top -# of each HTML page. A value of NO enables the index and the value YES disables -# it. Since the tabs in the index contain the same information as the navigation -# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. If the tag -# value is set to YES, a side panel will be generated containing a tree-like -# index structure (just like the one that is generated for HTML Help). For this -# to work a browser that supports JavaScript, DHTML, CSS and frames is required -# (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_TREEVIEW = YES - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. -# -# Note that a value of 0 will completely suppress the enum values from appearing -# in the overview section. -# Minimum value: 0, maximum value: 20, default value: 4. -# This tag requires that the tag GENERATE_HTML is set to YES. - -ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used -# to set the initial width (in pixels) of the frame in which the tree is shown. -# Minimum value: 0, maximum value: 1500, default value: 250. -# This tag requires that the tag GENERATE_HTML is set to YES. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to -# external symbols imported via tag files in a separate window. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of LaTeX formulas included as images in -# the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML -# output directory to force them to be regenerated. -# Minimum value: 8, maximum value: 50, default value: 10. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using prerendered bitmaps. Use this if you do not have LaTeX -# installed or if you want to formulas look prettier in the HTML output. When -# enabled you may also need to install MathJax separately and configure the path -# to it using the MATHJAX_RELPATH option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -USE_MATHJAX = NO - -# When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. -# Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. -# The default value is: HTML-CSS. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_FORMAT = HTML-CSS - -# When MathJax is enabled you need to specify the location relative to the HTML -# output directory using the MATHJAX_RELPATH option. The destination directory -# should contain the MathJax.js script. For instance, if the mathjax directory -# is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax -# Content Delivery Network so you can quickly see the result without installing -# MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax -# extension names that should be enabled during MathJax rendering. For example -# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_EXTENSIONS = - -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces -# of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an -# example see the documentation. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_CODEFILE = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and -# should work on any modern browser. Note that when using HTML help -# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) -# there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then -# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to -# search using the keyboard; to jump to the search box use + S -# (what the is depends on the OS and browser, but it is typically -# , /