mirror of https://github.com/ARMmbed/mbed-os.git
jeromecoutant
parent
9d016022b6
commit
a1570f936f
|
|
@ -24,4 +24,4 @@ This table summarizes the STM32Cube versions currently used :
|
|||
| L1 | 1.8.1 | https://github.com/STMicroelectronics/STM32CubeL1 |
|
||||
| L4 | 1.11.0 | https://github.com/STMicroelectronics/STM32CubeL4 |
|
||||
| L5 | 1.1.0 | https://github.com/STMicroelectronics/STM32CubeL5 |
|
||||
| WB | 1.0.0 | https://github.com/STMicroelectronics/STM32CubeWB |
|
||||
| WB | 1.4.0 | https://github.com/STMicroelectronics/STM32CubeWB |
|
||||
|
|
|
|||
|
|
@ -0,0 +1,314 @@
|
|||
# STM32WB family
|
||||
|
||||
[st.com STM32WB family page](https://www.st.com/en/microcontrollers-microprocessors/stm32wb-series.html)
|
||||
|
||||
This ST MCU family is dual-core : based on an Arm Cortex-M4 core and an Arm Cortex-M0+ core.
|
||||
|
||||
- M4 core is dedicated to application (mbed-os)
|
||||
- M0 core is dedicated to BLE FW (only binary, source files not provided)
|
||||
|
||||
# Supported boards
|
||||
|
||||
## NUCLEO_WB55RG
|
||||
|
||||
[st.com STM32WB55RG MCU page](https://www.st.com/en/microcontrollers-microprocessors/stm32wb55rg.html)
|
||||
|
||||
[st.com NUCLEO page](https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html)
|
||||
|
||||
- Total FLASH is 1MB, but note that it is shared by M4 and M0 cores.
|
||||
- mbed-os application size is then limited to 768 KB
|
||||
|
||||
- RAM: 256 KB
|
||||
- SRAM1: 192 KB
|
||||
- SRAM2a: 32 KB
|
||||
- SRAM2b: 32 KB
|
||||
|
||||
|
||||
# BLE
|
||||
|
||||
## MBED-OS support
|
||||
|
||||
BLE feature is based on Cordio stack and API (above HCI) implementation.
|
||||
|
||||
Note that the BLE controller firmware running on the cortex-M0 is the same as in STcubeFW solution
|
||||
|
||||
- within mbed, the controller will run only the below-HCI part
|
||||
- within STcubeFW (and STM32WPAN middleware), it can run also up to GATT / GAP layers ...
|
||||
|
||||
## mbed-trace support
|
||||
|
||||
trace group: BLE_WB
|
||||
|
||||
example:
|
||||
````
|
||||
[INFO][BLE_WB]: WIRELESS COPROCESSOR FW VERSION ID = 1.4.0
|
||||
[INFO][BLE_WB]: WIRELESS COPROCESSOR FW STACK TYPE = 1
|
||||
[DBG ][BLE_WB]: mbox_write type:1, len:3
|
||||
[INFO][BLE_WB]: TX>> BLE CMD
|
||||
[DBG ][BLE_WB]: Type 0x1
|
||||
[DBG ][BLE_WB]: Cmd 0xc03
|
||||
[DBG ][BLE_WB]: Len 0D]
|
||||
````
|
||||
|
||||
## BLE FW update
|
||||
|
||||
Latest information :
|
||||
https://github.com/STMicroelectronics/STM32CubeWB/blob/master/how_to_program_wireless_stacks.txt
|
||||
|
||||
Latest BLE FW :
|
||||
https://github.com/STMicroelectronics/STM32CubeWB/blob/master/Projects/STM32WB_Copro_Wireless_Binaries/stm32wb5x_BLE_Stack_fw.bin
|
||||
|
||||
## BLE FW flashing procedure
|
||||
|
||||
Release Note and complete flashing procedure:
|
||||
https://htmlpreview.github.io/?https://github.com/STMicroelectronics/STM32CubeWB/blob/master/Projects/STM32WB_Copro_Wireless_Binaries/Release_Notes.html
|
||||
|
||||
|
||||
- STEP 1: Use STM32CubeProgrammer
|
||||
|
||||
https://www.st.com/en/development-tools/stm32cubeprog.html
|
||||
|
||||
````
|
||||
FLASHPATH="C:\Program Files (x86)\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin"
|
||||
export PATH=$FLASHPATH:$PATH
|
||||
````
|
||||
|
||||
- STEP 2: Access to Bootloader USB Interface (system flash)
|
||||
|
||||
* Boot0 pin set to VDD : Jumper between CN7.5(VDD) and CN7.7(Boot0)
|
||||
* Jumper JP1 on USB_MCU
|
||||
* Power ON via USB_USER
|
||||
|
||||
|
||||
|
||||
- STEP 3 : Delete current wireless stack :
|
||||
|
||||
```
|
||||
$ ./STM32_Programmer_CLI.exe -c port=usb1 -fwdelete
|
||||
-------------------------------------------------------------------
|
||||
STM32CubeProgrammer v2.3.0
|
||||
-------------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
USB speed : Full Speed (12MBit/s)
|
||||
Manuf. ID : STMicroelectronics
|
||||
Product ID : DFU in FS Mode
|
||||
SN : 207F38933036
|
||||
FW version : 0x011a
|
||||
Device ID : 0x0495
|
||||
Device name : STM32WBxx
|
||||
Flash size : 1 MBytes
|
||||
Device type : MCU
|
||||
Device CPU : Cortex-M0+/M4
|
||||
|
||||
|
||||
FUS state is FUS_ERROR
|
||||
|
||||
FUS status is FUS_NOT_RUNNING
|
||||
|
||||
FUS state is FUS_IDLE
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
Deleting firmware ...
|
||||
Firmware delete finished
|
||||
fwdelete command execution finished
|
||||
```
|
||||
|
||||
- STEP 4 : Read and upgrade FUS Version
|
||||
|
||||
```
|
||||
$ ./STM32_Programmer_CLI.exe -c port=usb1 -r32 0x20030030 1
|
||||
-------------------------------------------------------------------
|
||||
STM32CubeProgrammer v2.3.0
|
||||
-------------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
USB speed : Full Speed (12MBit/s)
|
||||
Manuf. ID : STMicroelectronics
|
||||
Product ID : DFU in FS Mode
|
||||
SN : 207F38933036
|
||||
FW version : 0x011a
|
||||
Device ID : 0x0495
|
||||
Device name : STM32WBxx
|
||||
Flash size : 1 MBytes
|
||||
Device type : MCU
|
||||
Device CPU : Cortex-M0+/M4
|
||||
|
||||
|
||||
Reading 32-bit memory content
|
||||
Size : 4 Bytes
|
||||
Address: : 0x20030030
|
||||
|
||||
0x20030030 : 00050300
|
||||
```
|
||||
|
||||
- STEP 5 : Download new FUS :
|
||||
|
||||
```
|
||||
$ ./STM32_Programmer_CLI.exe -c port=usb1 -fwupgrade stm32wb5x_FUS_fw.bin 0x080EC000 firstinstall=0
|
||||
-------------------------------------------------------------------
|
||||
STM32CubeProgrammer v2.3.0
|
||||
-------------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
USB speed : Full Speed (12MBit/s)
|
||||
Manuf. ID : STMicroelectronics
|
||||
Product ID : DFU in FS Mode
|
||||
SN : 207F38933036
|
||||
FW version : 0x011a
|
||||
Device ID : 0x0495
|
||||
Device name : STM32WBxx
|
||||
Flash size : 1 MBytes
|
||||
Device type : MCU
|
||||
Device CPU : Cortex-M0+/M4
|
||||
|
||||
|
||||
FUS state is FUS_IDLE
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
|
||||
Old Firmware delete ...
|
||||
|
||||
Deleting firmware ...
|
||||
Firmware delete finished
|
||||
|
||||
FUS state is FUS_SERVICE_ONGOING
|
||||
|
||||
FUS status is FUS_IMAGE_NOT_FOUND
|
||||
|
||||
FUS state is FUS_IDLE
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
Download firmware image at address 0x80ec000 ...
|
||||
|
||||
Memory Programming ...
|
||||
Opening and parsing file: stm32wb5x_FUS_fw.bin
|
||||
File : stm32wb5x_FUS_fw.bin
|
||||
Size : 24492 Bytes
|
||||
Address : 0x080EC000
|
||||
|
||||
|
||||
Erasing memory corresponding to segment 0:
|
||||
Erasing internal memory sectors [236 241]
|
||||
erasing sector 0236 @: 0x080ec000 done
|
||||
erasing sector 0237 @: 0x080ed000 done
|
||||
erasing sector 0238 @: 0x080ee000 done
|
||||
erasing sector 0239 @: 0x080ef000 done
|
||||
erasing sector 0240 @: 0x080f0000 done
|
||||
erasing sector 0241 @: 0x080f1000 done
|
||||
Download in Progress:
|
||||
|
||||
File download complete
|
||||
Time elapsed during download operation: 00:00:00.512
|
||||
|
||||
FUS state is FUS_IDLE
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
|
||||
Firmware Upgrade process started ...
|
||||
|
||||
Updating firmware ...
|
||||
Waiting for firmware upgrade end
|
||||
|
||||
FUS state is FUS_UPGRADE_ONGOING
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
|
||||
FUS state is FUS_UPGRADE_ONGOING
|
||||
|
||||
FUS status is FUS_IMAGE_NOT_AUTHENTIC
|
||||
Error: Firmware not authentic!
|
||||
```
|
||||
|
||||
- STEP 4 (to check) : Read and upgrade FUS Version
|
||||
|
||||
```
|
||||
$ ./STM32_Programmer_CLI.exe -c port=usb1 -r32 0x20030030 1
|
||||
-------------------------------------------------------------------
|
||||
STM32CubeProgrammer v2.3.0
|
||||
-------------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
USB speed : Full Speed (12MBit/s)
|
||||
Manuf. ID : STMicroelectronics
|
||||
Product ID : DFU in FS Mode
|
||||
SN : 207F38933036
|
||||
FW version : 0x011a
|
||||
Device ID : 0x0495
|
||||
Device name : STM32WBxx
|
||||
Flash size : 1 MBytes
|
||||
Device type : MCU
|
||||
Device CPU : Cortex-M0+/M4
|
||||
|
||||
|
||||
Reading 32-bit memory content
|
||||
Size : 4 Bytes
|
||||
Address: : 0x20030030
|
||||
|
||||
0x20030030 : 01000200
|
||||
```
|
||||
|
||||
- STEP 6 : Download new wireless stack :
|
||||
|
||||
|
||||
```
|
||||
$ ./STM32_Programmer_CLI.exe -c port=usb1 -fwupgrade stm32wb5x_BLE_Stack_fw.bin 0x080CB000 firstinstall=1
|
||||
-------------------------------------------------------------------
|
||||
STM32CubeProgrammer v2.3.0
|
||||
-------------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
USB speed : Full Speed (12MBit/s)
|
||||
Manuf. ID : STMicroelectronics
|
||||
Product ID : DFU in FS Mode
|
||||
SN : 207F38933036
|
||||
FW version : 0x011a
|
||||
Device ID : 0x0495
|
||||
Device name : STM32WBxx
|
||||
Flash size : 1 MBytes
|
||||
Device type : MCU
|
||||
Device CPU : Cortex-M0+/M4
|
||||
|
||||
Download firmware image at address 0x80cb000 ...
|
||||
|
||||
|
||||
Memory Programming ...
|
||||
Opening and parsing file: stm32wb5x_BLE_Stack_fw.bin
|
||||
File : stm32wb5x_BLE_Stack_fw.bin
|
||||
Size : 165772 Bytes
|
||||
Address : 0x080CB000
|
||||
|
||||
|
||||
Erasing memory corresponding to segment 0:
|
||||
Erasing internal memory sectors [203 243]
|
||||
Download in Progress:
|
||||
|
||||
File download complete
|
||||
Time elapsed during download operation: 00:00:03.537
|
||||
|
||||
FUS state is FUS_IDLE
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
|
||||
Firmware Upgrade process started ...
|
||||
|
||||
Updating firmware ...
|
||||
Waiting for firmware upgrade end
|
||||
|
||||
FUS state is WIRELESS_STACK_UPGRADE_ONGOING
|
||||
|
||||
FUS status is FUS_NO_ERROR
|
||||
|
||||
FUS state is FUS_ERROR
|
||||
|
||||
FUS status is FUS_NOT_RUNNING
|
||||
Firmware Upgrade Success
|
||||
```
|
||||
|
||||
- STEP 7 : Revert STEP 2 procedure to put back device in normal mode.
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 2.9 MiB |
Loading…
Reference in New Issue