Adding NOT_SUPPORTED errors to tests

libraries/tests/mbed/analog/main.cpp

@@ -1,3 +1,11 @@
+#if !DEVICE_ANALOGIN
+  #error [NOT_SUPPORTED] AnalogIn not supported
+#endif
+
+#if !DEVICE_ANALOGOUT
+  #error [NOT_SUPPORTED] AnalogOut not supported
+#endif
+
 #include "test_env.h"
 
 #if defined(TARGET_K64F) | defined (TARGET_K22F)

libraries/tests/mbed/analog_pot/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_ANALOGIN
+  #error [NOT_SUPPORTED] AnalogIn not supported
+#endif
+
 #include "mbed.h"
 #include "test_env.h"
 
@@ -15,11 +19,11 @@ int main(void) {
 
     bool result = false;
     float val1, val2;
-    
+
     for (int i = 0; i < TEST_ITERATIONS; i++) {
         val1 = pot1.read();
         val2 = pot2.read();
-        
+
         const char *succes_str = val1 > MEASURE_MIN || val2 > MEASURE_MIN ? "[OK]" : "[FAIL]";
         result = result || (val1 > MEASURE_MIN || val2 > MEASURE_MIN);
         printf("Pot values %f, %f\r\n", val1, val2);

libraries/tests/mbed/bus/main.cpp

@@ -13,23 +13,26 @@ BusOut bus2(PB03, PB22, PB02, PB23);
 BusOut bus1(PA02, PA03, PA04, PA05, PA06, PA07, PA08, PA09, PA10, PA11, PA16, PA17);
 BusOut bus2(PB10, PB11, PB12, PB13);
 
-#else
+#elif defined(TARGET_FF_ARDUINO)
 BusOut bus1(D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15);
 BusOut bus2(A5, A4, A3, A2, A1, A0);
 
+#else
+#error [NOT_SUPPORTED] This test is not supported on this target
+
 #endif
 
 int i;
- 
+
 int main()
 {
     notify_start();
-    
+
     for (i=0; i<=65535; i++) {
         bus1 = i;
         bus2 = i;
         wait(0.0001);
     }
-    
+
     notify_completion(true);
 }

libraries/tests/mbed/can/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_CAN
+  #error [NOT_SUPPORTED] CAN not supported
+#endif
+
 #include "mbed.h"
 
 Ticker ticker;

libraries/tests/mbed/can_interrupt/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_CAN
+  #error [NOT_SUPPORTED] CAN not supported
+#endif
+
 #include "mbed.h"
 
 Ticker ticker;

libraries/tests/mbed/can_loopback/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_CAN
+  #error [NOT_SUPPORTED] CAN not supported
+#endif
+
 #include "mbed.h"
 #include "test_env.h"
 

libraries/tests/mbed/dir/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_LOCALFILESYSTEM
+  #error [NOT_SUPPORTED] LocalFileSystem not supported
+#endif
+
 #include "mbed.h"
 
 void led_blink(PinName led) {

libraries/tests/mbed/freopen/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_LOCALFILESYSTEM
+  #error [NOT_SUPPORTED] LocalFileSystem not supported
+#endif
+
 #include "mbed.h"
 #include "TextLCD.h"
 

libraries/tests/mbed/i2c_master/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_I2C
+  #error [NOT_SUPPORTED] I2C is not supported
+#endif
+
 #include "mbed.h"
 #include "test_env.h"
 

libraries/tests/mbed/i2c_slave/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_I2CSLAVE
+  #error [NOT_SUPPORTED] I2C Slave is not supported
+#endif
+
 #include "mbed.h"
 #include "test_env.h"
 

libraries/tests/mbed/interrupt_chaining/main.cpp

@@ -16,7 +16,7 @@
 #elif defined(TARGET_SAML21J18A)
 #define TIMER_IRQ       TC0_IRQn
 #else
-#error This test can't run on this target.
+#error [NOT_SUPPORTED] This test can't run on this target.
 #endif
 
 Serial pc(USBTX, USBRX);

libraries/tests/mbed/portout/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_PORTOUT
+  #error [NOT_SUPPORTED] PortOut is not supported
+#endif
+
 #include "mbed.h"
 
 # if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) || defined(TARGET_LPC4088) || defined(TARGET_LPC2460)
@@ -27,8 +31,8 @@
 # elif defined(TARGET_SAMR21G18A)
 #     define LED_PORT   PortA
 #     define LED1       (1 <<  19) /*PA19*/
-#     define LED2       0 
-#     define LED3       0 
+#     define LED2       0
+#     define LED3       0
 #     define LED4       0
 # elif defined(TARGET_SAMD21J18A)
 #     define LED_PORT   PortB
@@ -48,7 +52,9 @@
 #     define LED2       0
 #     define LED3       0
 #     define LED4       0
-# endif
+# else
+  #error [NOT_SUPPORTED] This test can't be ran on this target
+#endif
 
 
 #define LED_MASK    (LED1|LED2|LED3|LED4)

libraries/tests/mbed/pwm/main.cpp

@@ -48,7 +48,7 @@ int main() {
     printf("Initialize PWM on pin 24 with duty cycle: %.2f\n", pwm_dp24.read());
     printf("Initialize PWM on pin 18 with duty cycle: %.2f\n", pwm_dp18.read());
 
-#elif defined(TARGET_nRF51822)
+#elif defined(TARGET_NRF51822)
     PwmOut pwm_p24(p24);
     PwmOut pwm_p25(p25);
 
@@ -100,7 +100,7 @@ int main() {
 
     pwm_1.write(value);
     pwm_2.write(0.50);
-    
+
     float result = floor(pwm_1.read() * 100 + 0.5) / 100; // round it to 0.xx
 
     printf("Initialize PWM on pin PD_12 with duty cycle: %.2f\n", result);
@@ -111,7 +111,7 @@ int main() {
     PwmOut pwm_1(PA_0);
 
     pwm_1.write(value);
-    
+
     float result = floor(pwm_1.read() * 100 + 0.5) / 100; // round it to 0.xx
 
     printf("Initialize PWM on pin PD_12 with duty cycle: %.2f\n", result);
@@ -121,7 +121,7 @@ int main() {
     PwmOut pwm_1(PA_0);
 
     pwm_1.write(value);
-    
+
     float result = floor(pwm_1.read() * 100 + 0.5) / 100; // round it to 0.xx
 
     printf("Initialize PWM on pin PD_12 with duty cycle: %.2f\n", result);
@@ -131,7 +131,7 @@ int main() {
     PwmOut pwm_1(PA_0);
 
     pwm_1.write(value);
-    
+
     float result = floor(pwm_1.read() * 100 + 0.5) / 100; // round it to 0.xx
 
     printf("Initialize PWM on pin PD_12 with duty cycle: %.2f\n", result);
@@ -141,7 +141,7 @@ int main() {
     PwmOut pwm_1(PA_0);
 
     pwm_1.write(value);
-    
+
     float result = floor(pwm_1.read() * 100 + 0.5) / 100; // round it to 0.xx
 
     printf("Initialize PWM on pin PD_12 with duty cycle: %.2f\n", result);
@@ -151,7 +151,7 @@ int main() {
     PwmOut pwm_1(PA_0);
 
     pwm_1.write(value);
-    
+
     float result = floor(pwm_1.read() * 100 + 0.5) / 100; // round it to 0.xx
 
     printf("Initialize PWM on pin PD_12 with duty cycle: %.2f\n", result);
@@ -177,7 +177,7 @@ int main() {
 
     notify_completion(result == value ? true : false);
 #else
-#error This test is not supported on this target.
+#error [NOT_SUPPORTED] This test is not supported on this target.
 #endif
 
     notify_completion(true);

libraries/tests/mbed/pwm_led/pwm.cpp

@@ -26,14 +26,14 @@
 #elif defined (TARGET_MAXWSNENV)
 #define TEST_LED LED_GREEN
 
-#elif defined (TARGET_DISCO_F407VG) 
+#elif defined (TARGET_DISCO_F407VG)
 #define TEST_LED LED1
 
 #elif defined(TARGET_SAMR21G18A) || defined(TARGET_SAMD21J18A) || defined(TARGET_SAMD21G18A) || defined(TARGET_SAML21J18A)
 #define TEST_LED LED1
 
 #else
-#error This test is not supported on this target.
+  #error [NOT_SUPPORTED] This test is not supported on this target
 #endif
 
 PwmOut led(TEST_LED);

libraries/tests/mbed/reset/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_SEMIHOST
+  #error [NOT_SUPPORTED] Semihost not supported
+#endif
+
 #include "mbed.h"
 
 Serial pc(USBTX, USBRX);

libraries/tests/mbed/spi/main.cpp

@@ -1,5 +1,9 @@
 #include "mbed.h"
 
+#if !DEVICE_SPI
+  #error [NOT_SUPPORTED] SPI is not supported
+#endif
+
 #if defined(TARGET_SAMR21G18A)
 SPI spi(PB22, PB02, PB23);   // mosi, miso, sclk
 DigitalOut latchpin(PB03);

libraries/tests/mbed/spi_master/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_SPI
+  #error [NOT_SUPPORTED] SPI not supported
+#endif
+
 #include "mbed.h"
 #include "test_env.h"
 

libraries/tests/mbed/spi_slave/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_SPISLAVE
+  #error [NOT_SUPPORTED] SPI Slave not supported
+#endif
+
 #include "mbed.h"
 
 #if defined(TARGET_KL25Z)

libraries/tests/mbed/stdio_benchmark/main.cpp

@@ -1,3 +1,7 @@
+#if !DEVICE_LOCALFILESYSTEM
+  #error [NOT_SUPPORTED] LocalFileSystem not supported
+#endif
+
 #include "mbed.h"
 
 #define TEST_STDIO 0