diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/config/sdk_config.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/config/sdk_config.h index 2d3127b9f7..58c0cc4608 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/config/sdk_config.h +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/config/sdk_config.h @@ -1,5 +1,5 @@ /** - * Copyright (c) 2017 - 2017, Nordic Semiconductor ASA + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA * * All rights reserved. * @@ -21,10 +21,10 @@ * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. - * + * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. - * + * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE @@ -35,1393 +35,417 @@ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * + * */ - - #ifndef SDK_CONFIG_H #define SDK_CONFIG_H // <<< Use Configuration Wizard in Context Menu >>>\n #ifdef USE_APP_CONFIG #include "app_config.h" #endif -// Board Support -// Enable NRF Asserts when Mbed NDEBUG is not set -#if !defined(NDEBUG) && !defined(DEBUG_NRF_USER) -#define DEBUG_NRF_USER -#endif -//========================================================== -// BSP_BTN_BLE_ENABLED - bsp_btn_ble - Button Control for BLE - - -#ifndef BSP_BTN_BLE_ENABLED -#define BSP_BTN_BLE_ENABLED 0 -#endif - -// -//========================================================== - -// nRF_ANT - -//========================================================== -// ANTFS_ENABLED - ant_fs - ANT File Share module. -//========================================================== -#ifndef ANTFS_ENABLED -#define ANTFS_ENABLED 0 -#endif -// ANTFS_CONFIG_NETWORK_NUMBER - ANT-FS network number. -#ifndef ANTFS_CONFIG_NETWORK_NUMBER -#define ANTFS_CONFIG_NETWORK_NUMBER 0 -#endif - -// ANTFS_CONFIG_CHANNEL_NUMBER - ANT-FS channel number. -#ifndef ANTFS_CONFIG_CHANNEL_NUMBER -#define ANTFS_CONFIG_CHANNEL_NUMBER 0 -#endif - -// ANTFS_CONFIG_PAIRING_TIMEOUT - Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds. -#ifndef ANTFS_CONFIG_PAIRING_TIMEOUT -#define ANTFS_CONFIG_PAIRING_TIMEOUT 120 -#endif - -// ANTFS_CONFIG_LINK_COMMAND_TIMEOUT - Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds. -#ifndef ANTFS_CONFIG_LINK_COMMAND_TIMEOUT -#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT 10 -#endif - -// ANTFS_CONFIG_TRANS_TYPE - ANT-FS Transmission Type. -#ifndef ANTFS_CONFIG_TRANS_TYPE -#define ANTFS_CONFIG_TRANS_TYPE 10 -#endif - -// ANTFS_CONFIG_DEVICE_TYPE - ANT device type for channel configuration. -#ifndef ANTFS_CONFIG_DEVICE_TYPE -#define ANTFS_CONFIG_DEVICE_TYPE 1 -#endif - -// ANTFS_CONFIG_BEACON_STATUS_PERIOD - ANT-FS Beacon Message Period. - -// <0=> 0.5 Hz -// <1=> 1 Hz -// <2=> 2 Hz -// <3=> 4 Hz -// <4=> 8 Hz - -#ifndef ANTFS_CONFIG_BEACON_STATUS_PERIOD -#define ANTFS_CONFIG_BEACON_STATUS_PERIOD 3 -#endif - -// ANTFS_CONFIG_TRANSMIT_POWER - ANT Transmit Power. - -// <0=> Lowest ANT Tx power level setting. (-20dBm) -// <1=> ANT Tx power > Lvl 0. (-12dBm) -// <2=> ANT Tx power > Lvl 1. (-4dBm) -// <3=> ANT Tx power > Lvl 2. Default tx power level. (0dBm) -// <4=> ANT Tx power > Lvl 3. (+4dBm) -// <128=> Custom tx power selection - -#ifndef ANTFS_CONFIG_TRANSMIT_POWER -#define ANTFS_CONFIG_TRANSMIT_POWER 3 -#endif - -// ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER - ANT Custom Transmit Power. -#ifndef ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER -#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER 0 -#endif - -// ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED - Use pairing and key exchange authentication. - - -#ifndef ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED -#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED 0 -#endif - -// ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED - Use passkey authentication. - - -#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED -#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED 0 -#endif - -// ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED - Allow host to bypass authentication. - - -#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED -#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED 0 -#endif - -// ANTFS_CONFIG_UPLOAD_ENABLED - Support upload operation. - - -#ifndef ANTFS_CONFIG_UPLOAD_ENABLED -#define ANTFS_CONFIG_UPLOAD_ENABLED 0 -#endif - -// ANTFS_CONFIG_DEBUG_LED_ENABLED - Enables LED debug in the module. - - -#ifndef ANTFS_CONFIG_DEBUG_LED_ENABLED -#define ANTFS_CONFIG_DEBUG_LED_ENABLED 0 -#endif - -// - -// ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile -//========================================================== -#ifndef ANT_BPWR_ENABLED -#define ANT_BPWR_ENABLED 0 -#endif -// ANT_BPWR_LOG_ENABLED - Enables general logging in the module. -//========================================================== -#ifndef ANT_BPWR_LOG_ENABLED -#define ANT_BPWR_LOG_ENABLED 0 -#endif -// ANT_BPWR_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_LOG_LEVEL -#define ANT_BPWR_LOG_LEVEL 3 -#endif - -// ANT_BPWR_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_INFO_COLOR -#define ANT_BPWR_INFO_COLOR 0 -#endif - -// - -// ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data. -//========================================================== -#ifndef ANT_BPWR_COMMON_LOG_ENABLED -#define ANT_BPWR_COMMON_LOG_ENABLED 0 -#endif -// ANT_BPWR_COMMON_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_COMMON_LOG_LEVEL -#define ANT_BPWR_COMMON_LOG_LEVEL 3 -#endif - -// ANT_BPWR_COMMON_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_COMMON_INFO_COLOR -#define ANT_BPWR_COMMON_INFO_COLOR 0 -#endif - -// - -// ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module. -//========================================================== -#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED -#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 0 -#endif -// ANT_BPWR_PAGE_TORQUE_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL -#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3 -#endif - -// ANT_BPWR_PAGE_TORQUE_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR -#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0 -#endif - -// - -// ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module. -//========================================================== -#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED -#define ANT_BPWR_PAGE_1_LOG_ENABLED 0 -#endif -// ANT_BPWR_PAGE_1_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL -#define ANT_BPWR_PAGE_1_LOG_LEVEL 3 -#endif - -// ANT_BPWR_PAGE_1_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_PAGE_1_INFO_COLOR -#define ANT_BPWR_PAGE_1_INFO_COLOR 0 -#endif - -// - -// ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module. -//========================================================== -#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED -#define ANT_BPWR_PAGE_16_LOG_ENABLED 0 -#endif -// ANT_BPWR_PAGE_16_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL -#define ANT_BPWR_PAGE_16_LOG_LEVEL 3 -#endif - -// ANT_BPWR_PAGE_16_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_PAGE_16_INFO_COLOR -#define ANT_BPWR_PAGE_16_INFO_COLOR 0 -#endif - -// - -// ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module. -//========================================================== -#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED -#define ANT_BPWR_PAGE_17_LOG_ENABLED 0 -#endif -// ANT_BPWR_PAGE_17_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL -#define ANT_BPWR_PAGE_17_LOG_LEVEL 3 -#endif - -// ANT_BPWR_PAGE_17_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_PAGE_17_INFO_COLOR -#define ANT_BPWR_PAGE_17_INFO_COLOR 0 -#endif - -// - -// ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module. -//========================================================== -#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED -#define ANT_BPWR_PAGE_18_LOG_ENABLED 0 -#endif -// ANT_BPWR_PAGE_18_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL -#define ANT_BPWR_PAGE_18_LOG_LEVEL 3 -#endif - -// ANT_BPWR_PAGE_18_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BPWR_PAGE_18_INFO_COLOR -#define ANT_BPWR_PAGE_18_INFO_COLOR 0 -#endif - -// - -// - -// ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile -//========================================================== -#ifndef ANT_BSC_ENABLED -#define ANT_BSC_ENABLED 0 -#endif -// ANT_BSC_LOG_ENABLED - Enables general logging in the module. -//========================================================== -#ifndef ANT_BSC_LOG_ENABLED -#define ANT_BSC_LOG_ENABLED 0 -#endif -// ANT_BSC_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_LOG_LEVEL -#define ANT_BSC_LOG_LEVEL 3 -#endif - -// ANT_BSC_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_INFO_COLOR -#define ANT_BSC_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module. -//========================================================== -#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED -#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 0 -#endif -// ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL -#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3 -#endif - -// ANT_BSC_COMBINED_PAGE_0_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR -#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module. -//========================================================== -#ifndef ANT_BSC_PAGE_0_LOG_ENABLED -#define ANT_BSC_PAGE_0_LOG_ENABLED 0 -#endif -// ANT_BSC_PAGE_0_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_PAGE_0_LOG_LEVEL -#define ANT_BSC_PAGE_0_LOG_LEVEL 3 -#endif - -// ANT_BSC_PAGE_0_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_PAGE_0_INFO_COLOR -#define ANT_BSC_PAGE_0_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module. -//========================================================== -#ifndef ANT_BSC_PAGE_1_LOG_ENABLED -#define ANT_BSC_PAGE_1_LOG_ENABLED 0 -#endif -// ANT_BSC_PAGE_1_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_PAGE_1_LOG_LEVEL -#define ANT_BSC_PAGE_1_LOG_LEVEL 3 -#endif - -// ANT_BSC_PAGE_1_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_PAGE_1_INFO_COLOR -#define ANT_BSC_PAGE_1_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module. -//========================================================== -#ifndef ANT_BSC_PAGE_2_LOG_ENABLED -#define ANT_BSC_PAGE_2_LOG_ENABLED 0 -#endif -// ANT_BSC_PAGE_2_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_PAGE_2_LOG_LEVEL -#define ANT_BSC_PAGE_2_LOG_LEVEL 3 -#endif - -// ANT_BSC_PAGE_2_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_PAGE_2_INFO_COLOR -#define ANT_BSC_PAGE_2_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module. -//========================================================== -#ifndef ANT_BSC_PAGE_3_LOG_ENABLED -#define ANT_BSC_PAGE_3_LOG_ENABLED 0 -#endif -// ANT_BSC_PAGE_3_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_PAGE_3_LOG_LEVEL -#define ANT_BSC_PAGE_3_LOG_LEVEL 3 -#endif - -// ANT_BSC_PAGE_3_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_PAGE_3_INFO_COLOR -#define ANT_BSC_PAGE_3_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module. -//========================================================== -#ifndef ANT_BSC_PAGE_4_LOG_ENABLED -#define ANT_BSC_PAGE_4_LOG_ENABLED 0 -#endif -// ANT_BSC_PAGE_4_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_PAGE_4_LOG_LEVEL -#define ANT_BSC_PAGE_4_LOG_LEVEL 3 -#endif - -// ANT_BSC_PAGE_4_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_PAGE_4_INFO_COLOR -#define ANT_BSC_PAGE_4_INFO_COLOR 0 -#endif - -// - -// ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module. -//========================================================== -#ifndef ANT_BSC_PAGE_5_LOG_ENABLED -#define ANT_BSC_PAGE_5_LOG_ENABLED 0 -#endif -// ANT_BSC_PAGE_5_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_BSC_PAGE_5_LOG_LEVEL -#define ANT_BSC_PAGE_5_LOG_LEVEL 3 -#endif - -// ANT_BSC_PAGE_5_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_BSC_PAGE_5_INFO_COLOR -#define ANT_BSC_PAGE_5_INFO_COLOR 0 -#endif - -// - -// - -// ANT_CHANNEL_CONFIG_ENABLED - ant_channel_config - ANT common channel configuration - - -#ifndef ANT_CHANNEL_CONFIG_ENABLED -#define ANT_CHANNEL_CONFIG_ENABLED 0 -#endif - -// ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70 -//========================================================== -#ifndef ANT_COMMON_PAGE_70_ENABLED -#define ANT_COMMON_PAGE_70_ENABLED 0 -#endif -// ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module. -//========================================================== -#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED -#define ANT_COMMON_PAGE_70_LOG_ENABLED 0 -#endif -// ANT_COMMON_PAGE_70_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL -#define ANT_COMMON_PAGE_70_LOG_LEVEL 3 -#endif - -// ANT_COMMON_PAGE_70_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_COMMON_PAGE_70_INFO_COLOR -#define ANT_COMMON_PAGE_70_INFO_COLOR 0 -#endif - -// - -// - -// ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80 -//========================================================== -#ifndef ANT_COMMON_PAGE_80_ENABLED -#define ANT_COMMON_PAGE_80_ENABLED 0 -#endif -// ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module. -//========================================================== -#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED -#define ANT_COMMON_PAGE_80_LOG_ENABLED 0 -#endif -// ANT_COMMON_PAGE_80_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL -#define ANT_COMMON_PAGE_80_LOG_LEVEL 3 -#endif - -// ANT_COMMON_PAGE_80_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_COMMON_PAGE_80_INFO_COLOR -#define ANT_COMMON_PAGE_80_INFO_COLOR 0 -#endif - -// - -// - -// ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81 -//========================================================== -#ifndef ANT_COMMON_PAGE_81_ENABLED -#define ANT_COMMON_PAGE_81_ENABLED 0 -#endif -// ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module. -//========================================================== -#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED -#define ANT_COMMON_PAGE_81_LOG_ENABLED 0 -#endif -// ANT_COMMON_PAGE_81_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL -#define ANT_COMMON_PAGE_81_LOG_LEVEL 3 -#endif - -// ANT_COMMON_PAGE_81_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_COMMON_PAGE_81_INFO_COLOR -#define ANT_COMMON_PAGE_81_INFO_COLOR 0 -#endif - -// - -// - -// ANT_ENCRYPT_CONFIG_ENABLED - ant_encrypt_config - Cryptographic ANT stack configuration - - -#ifndef ANT_ENCRYPT_CONFIG_ENABLED -#define ANT_ENCRYPT_CONFIG_ENABLED 0 -#endif - -// ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile -//========================================================== -#ifndef ANT_HRM_ENABLED -#define ANT_HRM_ENABLED 0 -#endif -// ANT_HRM_LOG_ENABLED - Enables general logging in the module. -//========================================================== -#ifndef ANT_HRM_LOG_ENABLED -#define ANT_HRM_LOG_ENABLED 0 -#endif -// ANT_HRM_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_HRM_LOG_LEVEL -#define ANT_HRM_LOG_LEVEL 3 -#endif - -// ANT_HRM_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_HRM_INFO_COLOR -#define ANT_HRM_INFO_COLOR 0 -#endif - -// - -// ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module. -//========================================================== -#ifndef ANT_HRM_PAGE_0_LOG_ENABLED -#define ANT_HRM_PAGE_0_LOG_ENABLED 0 -#endif -// ANT_HRM_PAGE_0_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_HRM_PAGE_0_LOG_LEVEL -#define ANT_HRM_PAGE_0_LOG_LEVEL 3 -#endif - -// ANT_HRM_PAGE_0_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_HRM_PAGE_0_INFO_COLOR -#define ANT_HRM_PAGE_0_INFO_COLOR 0 -#endif - -// - -// ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module. -//========================================================== -#ifndef ANT_HRM_PAGE_1_LOG_ENABLED -#define ANT_HRM_PAGE_1_LOG_ENABLED 0 -#endif -// ANT_HRM_PAGE_1_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_HRM_PAGE_1_LOG_LEVEL -#define ANT_HRM_PAGE_1_LOG_LEVEL 3 -#endif - -// ANT_HRM_PAGE_1_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_HRM_PAGE_1_INFO_COLOR -#define ANT_HRM_PAGE_1_INFO_COLOR 0 -#endif - -// - -// ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module. -//========================================================== -#ifndef ANT_HRM_PAGE_2_LOG_ENABLED -#define ANT_HRM_PAGE_2_LOG_ENABLED 0 -#endif -// ANT_HRM_PAGE_2_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_HRM_PAGE_2_LOG_LEVEL -#define ANT_HRM_PAGE_2_LOG_LEVEL 3 -#endif - -// ANT_HRM_PAGE_2_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_HRM_PAGE_2_INFO_COLOR -#define ANT_HRM_PAGE_2_INFO_COLOR 0 -#endif - -// - -// ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module. -//========================================================== -#ifndef ANT_HRM_PAGE_3_LOG_ENABLED -#define ANT_HRM_PAGE_3_LOG_ENABLED 0 -#endif -// ANT_HRM_PAGE_3_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_HRM_PAGE_3_LOG_LEVEL -#define ANT_HRM_PAGE_3_LOG_LEVEL 3 -#endif - -// ANT_HRM_PAGE_3_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_HRM_PAGE_3_INFO_COLOR -#define ANT_HRM_PAGE_3_INFO_COLOR 0 -#endif - -// - -// ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module. -//========================================================== -#ifndef ANT_HRM_PAGE_4_LOG_ENABLED -#define ANT_HRM_PAGE_4_LOG_ENABLED 0 -#endif -// ANT_HRM_PAGE_4_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_HRM_PAGE_4_LOG_LEVEL -#define ANT_HRM_PAGE_4_LOG_LEVEL 3 -#endif - -// ANT_HRM_PAGE_4_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_HRM_PAGE_4_INFO_COLOR -#define ANT_HRM_PAGE_4_INFO_COLOR 0 -#endif - -// - -// - -// ANT_KEY_MANAGER_ENABLED - ant_key_manager - Software Component - - -#ifndef ANT_KEY_MANAGER_ENABLED -#define ANT_KEY_MANAGER_ENABLED 0 -#endif - -// ANT_REQUEST_CONTROLLER_ENABLED - ant_request_controller - ANT+ request controller - - -#ifndef ANT_REQUEST_CONTROLLER_ENABLED -#define ANT_REQUEST_CONTROLLER_ENABLED 0 -#endif - -// ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile -//========================================================== -#ifndef ANT_SDM_ENABLED -#define ANT_SDM_ENABLED 0 -#endif -// ANT_SDM_LOG_ENABLED - Enables general logging in the module. -//========================================================== -#ifndef ANT_SDM_LOG_ENABLED -#define ANT_SDM_LOG_ENABLED 0 -#endif -// ANT_SDM_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef ANT_SDM_LOG_LEVEL -#define ANT_SDM_LOG_LEVEL 3 -#endif - -// ANT_SDM_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef ANT_SDM_INFO_COLOR -#define ANT_SDM_INFO_COLOR 0 -#endif - -// - -// - -// ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration -//========================================================== -#ifndef ANT_SEARCH_CONFIG_ENABLED -#define ANT_SEARCH_CONFIG_ENABLED 0 -#endif -// ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out. <0-255> - - -#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT -#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2 -#endif - -// ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out. <0-255> - - -#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT -#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10 -#endif - -// - -// ANT_STACK_CONFIG_ENABLED - ant_stack_config - Common ANT stack configuration -//========================================================== -#ifndef ANT_STACK_CONFIG_ENABLED -#define ANT_STACK_CONFIG_ENABLED 0 -#endif -// ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels -#ifndef ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED -#define ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED 0 -#endif - -// ANT_CONFIG_ENCRYPTED_CHANNELS - Encrypted ANT channels -#ifndef ANT_CONFIG_ENCRYPTED_CHANNELS -#define ANT_CONFIG_ENCRYPTED_CHANNELS 0 -#endif - -// ANT_CONFIG_EVENT_QUEUE_SIZE - Event queue size -#ifndef ANT_CONFIG_EVENT_QUEUE_SIZE -#define ANT_CONFIG_EVENT_QUEUE_SIZE 32 -#endif - -// ANT_CONFIG_BURST_QUEUE_SIZE - ANT burst queue size -#ifndef ANT_CONFIG_BURST_QUEUE_SIZE -#define ANT_CONFIG_BURST_QUEUE_SIZE 128 -#endif - -// - -// ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP -//========================================================== -#ifndef ANT_STATE_INDICATOR_ENABLED -#define ANT_STATE_INDICATOR_ENABLED 0 -#endif -// ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. -#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY -#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1 -#endif - -// - -// -//========================================================== - -// nRF_BLE +// nRF_BLE //========================================================== // BLE_ADVERTISING_ENABLED - ble_advertising - Advertising module - + #ifndef BLE_ADVERTISING_ENABLED #define BLE_ADVERTISING_ENABLED 0 #endif // BLE_DTM_ENABLED - ble_dtm - Module for testing RF/PHY using DTM commands - + #ifndef BLE_DTM_ENABLED #define BLE_DTM_ENABLED 0 #endif // BLE_RACP_ENABLED - ble_racp - Record Access Control Point library - + #ifndef BLE_RACP_ENABLED #define BLE_RACP_ENABLED 0 #endif -// NRF_BLE_CONN_PARAMS_ENABLED - ble_conn_params - Initiating and executing a connection parameters negotiation procedure +// NRF_BLE_QWR_ENABLED - nrf_ble_qwr - Queued writes support module (prepare/execute write) //========================================================== -#ifndef NRF_BLE_CONN_PARAMS_ENABLED -#define NRF_BLE_CONN_PARAMS_ENABLED 0 -#endif -// NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION - The largest acceptable deviation in slave latency. -// The largest deviation (+ or -) from the requested slave latency that will not be renegotiated. - -#ifndef NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION -#define NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION 499 -#endif - -// NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION - The largest acceptable deviation (in 10 ms units) in supervision timeout. -// The largest deviation (+ or -, in 10 ms units) from the requested supervision timeout that will not be renegotiated. - -#ifndef NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION -#define NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION 65535 -#endif - -// - -// NRF_BLE_QWR_ENABLED - nrf_ble_qwr - Queued writes support module (prepare/execute write) - - #ifndef NRF_BLE_QWR_ENABLED #define NRF_BLE_QWR_ENABLED 0 #endif +// NRF_BLE_QWR_MAX_ATTR - Maximum number of attribute handles that can be registered. This number must be adjusted according to the number of attributes for which Queued Writes will be enabled. If it is zero, the module will reject all Queued Write requests. +#ifndef NRF_BLE_QWR_MAX_ATTR +#define NRF_BLE_QWR_MAX_ATTR 0 +#endif + +// // PEER_MANAGER_ENABLED - peer_manager - Peer Manager //========================================================== #ifndef PEER_MANAGER_ENABLED #define PEER_MANAGER_ENABLED 0 #endif -// PM_MAX_REGISTRANTS -// Number of event handlers that can be registered. - +// PM_MAX_REGISTRANTS - Number of event handlers that can be registered. #ifndef PM_MAX_REGISTRANTS #define PM_MAX_REGISTRANTS 3 #endif -// PM_FLASH_BUFFERS -// Number of internal buffers for flash operations. +// PM_FLASH_BUFFERS - Number of internal buffers for flash operations. // Decrease this value to lower RAM usage. #ifndef PM_FLASH_BUFFERS -#define PM_FLASH_BUFFERS 8 +#define PM_FLASH_BUFFERS 2 +#endif + +// PM_CENTRAL_ENABLED - Enable/disable central-specific Peer Manager functionality. + + +// Enable/disable central-specific Peer Manager functionality. + +#ifndef PM_CENTRAL_ENABLED +#define PM_CENTRAL_ENABLED 1 +#endif + +// PM_SERVICE_CHANGED_ENABLED - Enable/disable the service changed management for GATT server in Peer Manager. + + +// If not using a GATT server, or using a server wihout a service changed characteristic, +// disable this to save code space. + +#ifndef PM_SERVICE_CHANGED_ENABLED +#define PM_SERVICE_CHANGED_ENABLED 1 +#endif + +// PM_PEER_RANKS_ENABLED - Enable/disable the peer rank management in Peer Manager. + + +// Set this to false to save code space if not using the peer rank API. + +#ifndef PM_PEER_RANKS_ENABLED +#define PM_PEER_RANKS_ENABLED 1 #endif // -// +// //========================================================== -// nRF_BLE_Services +// nRF_BLE_Services //========================================================== // BLE_ANCS_C_ENABLED - ble_ancs_c - Apple Notification Service Client - + #ifndef BLE_ANCS_C_ENABLED #define BLE_ANCS_C_ENABLED 0 #endif // BLE_ANS_C_ENABLED - ble_ans_c - Alert Notification Service Client - + #ifndef BLE_ANS_C_ENABLED #define BLE_ANS_C_ENABLED 0 #endif // BLE_BAS_C_ENABLED - ble_bas_c - Battery Service Client - + #ifndef BLE_BAS_C_ENABLED #define BLE_BAS_C_ENABLED 0 #endif -// BLE_BAS_ENABLED - ble_bas - Battery Service - - +// BLE_BAS_ENABLED - ble_bas - Battery Service +//========================================================== #ifndef BLE_BAS_ENABLED #define BLE_BAS_ENABLED 0 #endif +// BLE_BAS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef BLE_BAS_CONFIG_LOG_ENABLED +#define BLE_BAS_CONFIG_LOG_ENABLED 0 +#endif +// BLE_BAS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef BLE_BAS_CONFIG_LOG_LEVEL +#define BLE_BAS_CONFIG_LOG_LEVEL 3 +#endif + +// BLE_BAS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef BLE_BAS_CONFIG_INFO_COLOR +#define BLE_BAS_CONFIG_INFO_COLOR 0 +#endif + +// BLE_BAS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef BLE_BAS_CONFIG_DEBUG_COLOR +#define BLE_BAS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// // BLE_CSCS_ENABLED - ble_cscs - Cycling Speed and Cadence Service - + #ifndef BLE_CSCS_ENABLED #define BLE_CSCS_ENABLED 0 #endif // BLE_CTS_C_ENABLED - ble_cts_c - Current Time Service Client - + #ifndef BLE_CTS_C_ENABLED #define BLE_CTS_C_ENABLED 0 #endif // BLE_DIS_ENABLED - ble_dis - Device Information Service - + #ifndef BLE_DIS_ENABLED #define BLE_DIS_ENABLED 0 #endif // BLE_GLS_ENABLED - ble_gls - Glucose Service - + #ifndef BLE_GLS_ENABLED #define BLE_GLS_ENABLED 0 #endif // BLE_HIDS_ENABLED - ble_hids - Human Interface Device Service - + #ifndef BLE_HIDS_ENABLED #define BLE_HIDS_ENABLED 0 #endif // BLE_HRS_C_ENABLED - ble_hrs_c - Heart Rate Service Client - + #ifndef BLE_HRS_C_ENABLED #define BLE_HRS_C_ENABLED 0 #endif // BLE_HRS_ENABLED - ble_hrs - Heart Rate Service - + #ifndef BLE_HRS_ENABLED #define BLE_HRS_ENABLED 0 #endif // BLE_HTS_ENABLED - ble_hts - Health Thermometer Service - + #ifndef BLE_HTS_ENABLED #define BLE_HTS_ENABLED 0 #endif // BLE_IAS_C_ENABLED - ble_ias_c - Immediate Alert Service Client - + #ifndef BLE_IAS_C_ENABLED #define BLE_IAS_C_ENABLED 0 #endif -// BLE_IAS_ENABLED - ble_ias - Immediate Alert Service - - +// BLE_IAS_ENABLED - ble_ias - Immediate Alert Service +//========================================================== #ifndef BLE_IAS_ENABLED #define BLE_IAS_ENABLED 0 #endif +// BLE_IAS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef BLE_IAS_CONFIG_LOG_ENABLED +#define BLE_IAS_CONFIG_LOG_ENABLED 0 +#endif +// BLE_IAS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef BLE_IAS_CONFIG_LOG_LEVEL +#define BLE_IAS_CONFIG_LOG_LEVEL 3 +#endif + +// BLE_IAS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef BLE_IAS_CONFIG_INFO_COLOR +#define BLE_IAS_CONFIG_INFO_COLOR 0 +#endif + +// BLE_IAS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef BLE_IAS_CONFIG_DEBUG_COLOR +#define BLE_IAS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// // BLE_LBS_C_ENABLED - ble_lbs_c - Nordic LED Button Service Client - + #ifndef BLE_LBS_C_ENABLED #define BLE_LBS_C_ENABLED 0 #endif // BLE_LBS_ENABLED - ble_lbs - LED Button Service - + #ifndef BLE_LBS_ENABLED #define BLE_LBS_ENABLED 0 #endif // BLE_LLS_ENABLED - ble_lls - Link Loss Service - + #ifndef BLE_LLS_ENABLED #define BLE_LLS_ENABLED 0 #endif // BLE_NUS_C_ENABLED - ble_nus_c - Nordic UART Central Service - + #ifndef BLE_NUS_C_ENABLED #define BLE_NUS_C_ENABLED 0 #endif -// BLE_NUS_ENABLED - ble_nus - Nordic UART Service - - +// BLE_NUS_ENABLED - ble_nus - Nordic UART Service +//========================================================== #ifndef BLE_NUS_ENABLED #define BLE_NUS_ENABLED 0 #endif +// BLE_NUS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef BLE_NUS_CONFIG_LOG_ENABLED +#define BLE_NUS_CONFIG_LOG_ENABLED 0 +#endif +// BLE_NUS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef BLE_NUS_CONFIG_LOG_LEVEL +#define BLE_NUS_CONFIG_LOG_LEVEL 3 +#endif + +// BLE_NUS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef BLE_NUS_CONFIG_INFO_COLOR +#define BLE_NUS_CONFIG_INFO_COLOR 0 +#endif + +// BLE_NUS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef BLE_NUS_CONFIG_DEBUG_COLOR +#define BLE_NUS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// // BLE_RSCS_C_ENABLED - ble_rscs_c - Running Speed and Cadence Client - + #ifndef BLE_RSCS_C_ENABLED #define BLE_RSCS_C_ENABLED 0 #endif // BLE_RSCS_ENABLED - ble_rscs - Running Speed and Cadence Service - + #ifndef BLE_RSCS_ENABLED #define BLE_RSCS_ENABLED 0 #endif // BLE_TPS_ENABLED - ble_tps - TX Power Service - + #ifndef BLE_TPS_ENABLED #define BLE_TPS_ENABLED 0 #endif -// +// //========================================================== -// nRF_Core +// nRF_Core //========================================================== // NRF_MPU_ENABLED - nrf_mpu - Module for MPU @@ -1430,10 +454,10 @@ #define NRF_MPU_ENABLED 0 #endif // NRF_MPU_CLI_CMDS - Enable CLI commands specific to the module - + #ifndef NRF_MPU_CLI_CMDS -#define NRF_MPU_CLI_CMDS 1 +#define NRF_MPU_CLI_CMDS 0 #endif // @@ -1444,15 +468,15 @@ #define NRF_STACK_GUARD_ENABLED 0 #endif // NRF_STACK_GUARD_CONFIG_SIZE - Size of stack guard - -// <5=> 32 bytes -// <6=> 64 bytes -// <7=> 128 bytes -// <8=> 256 bytes -// <9=> 512 bytes -// <10=> 1024 bytes -// <11=> 2048 bytes -// <12=> 4096 bytes + +// <5=> 32 bytes +// <6=> 64 bytes +// <7=> 128 bytes +// <8=> 256 bytes +// <9=> 512 bytes +// <10=> 1024 bytes +// <11=> 2048 bytes +// <12=> 4096 bytes #ifndef NRF_STACK_GUARD_CONFIG_SIZE #define NRF_STACK_GUARD_CONFIG_SIZE 7 @@ -1460,240 +484,749 @@ // -// +// //========================================================== -// nRF_Crypto +// nRF_Crypto //========================================================== // NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library //========================================================== #ifndef NRF_CRYPTO_ENABLED -#define NRF_CRYPTO_ENABLED 0 +#define NRF_CRYPTO_ENABLED 1 #endif -// NRF_CRYPTO_BACKEND_CC310_LIB - Enable the ARM Cryptocell CC310 backend +// NRF_CRYPTO_ALLOCATOR - Memory allocator + +// Choose memory allocator used by nrf_crypto. Default is alloca if possible or nrf_malloc otherwise. If 'User macros' are selected then user have to create 'nrf_crypto_allocator.h' file containing NRF_CRYPTO_ALLOC, NRF_CRYPTO_FREE and NRF_CRYPTO_ALLOC_ON_STACK +// <0=> Default +// <1=> User macros +// <2=> On stack (alloca) +// <3=> C dynamic memory (malloc) +// <4=> SDK Memory Manager (nrf_malloc) -// The hardware-accelerated cryptography backend is available only on nRF52840. - -#ifndef NRF_CRYPTO_BACKEND_CC310_LIB -#define NRF_CRYPTO_BACKEND_CC310_LIB 1 +#ifndef NRF_CRYPTO_ALLOCATOR +#define NRF_CRYPTO_ALLOCATOR 0 #endif -// NRF_CRYPTO_BACKEND_MICRO_ECC - Enable the micro-ecc software backend +// NRF_CRYPTO_BACKEND_CC310_BL_ENABLED - Enable the ARM Cryptocell CC310 reduced backend. -// The micro-ecc library provides a software implementation of ECC cryptography for nRF5 Series devices. +// The CC310 hardware-accelerated cryptography backend with reduced functionality and footprint (only available on nRF52840). //========================================================== -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC -#define NRF_CRYPTO_BACKEND_MICRO_ECC 0 +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ENABLED 0 #endif -// NRF_CRYPTO_BACKEND_MICRO_ECC_SHA256 - Enable SHA256 +// NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310_BL. + - -// Enable SHA256 cryptographic hash functionality. -// Enable this setting if you need SHA256 support, for example to verify signatures. - -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_SHA256 -#define NRF_CRYPTO_BACKEND_MICRO_ECC_SHA256 1 +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED 0 #endif -// NRF_CRYPTO_BACKEND_MICRO_ECC_RNG - Enable random number generator +// NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310_BL. + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED 1 +#endif -// Enable random number generation. -// Enable this setting if you need to generate cryptographic keys. -// This setting requires the RNG peripheral driver to be present. +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED - CC310_BL SHA-256 hash functionality. + -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_RNG -#define NRF_CRYPTO_BACKEND_MICRO_ECC_RNG 0 +// CC310_BL backend implementation for hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED - nrf_cc310_bl hash outputs digests in little endian + + +// Makes the nRF SH hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED 0 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED - nrf_cc310_bl buffers to RAM before running hash operation + + +// Enabling this makes hashing of addresses in FLASH range possible. Size of buffer allocated for hashing is set by NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED 0 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - nrf_cc310_bl hash outputs digests in little endian +// Makes the nrf_cc310_bl hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE 4096 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED - Enable non-standard little endian byte order in nrf_cc310_bl ECC functions. + + +// This affects parameters for all nrf_cc310_bl ECC APIs (raw keys, signature, digest). Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED 0 +#endif + +// + +// NRF_CRYPTO_BACKEND_CC310_ENABLED - Enable the ARM Cryptocell CC310 backend. + +// The CC310 hardware-accelerated cryptography backend (only available on nRF52840). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CC310_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED - Enable the AES CBC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED - Enable the AES CTR mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED - Enable the AES ECB mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED - Enable the AES CBC_MAC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED - Enable the AES CMAC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED - Enable the AES CCM mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED - Enable the AES CCM* mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED - Enable the secp160r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED - Enable the secp160r2 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED - Enable the secp192r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED - Enable the secp384r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED - Enable the secp521r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED - Enable the secp160k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED - Enable the secp192k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED - Enable the secp224k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED - Enable the secp256k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED - CC310 SHA-256 hash functionality. + + +// CC310 backend implementation for hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED - CC310 SHA-512 hash functionality + + +// CC310 backend implementation for SHA-512 (in software). + +#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED - CC310 HMAC using SHA-256 + + +// CC310 backend implementation for HMAC using hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED - CC310 HMAC using SHA-512 + + +// CC310 backend implementation for HMAC using SHA-512 (in software). + +#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED - Enable RNG support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_CIFRA_ENABLED - Enable the Cifra backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CIFRA_ENABLED +#define NRF_CRYPTO_BACKEND_CIFRA_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED - Enable the AES EAX mode using Cifra. + + +#ifndef NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED +#define NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED - Enable the mbed TLS backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED - Enable the AES CBC mode mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED - Enable the AES CTR mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED - Enable the AES CFB mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED - Enable the AES ECB mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED - Enable the AES CBC MAC mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED - Enable the AES CMAC mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED - Enable the AES CCM mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED - Enable the AES GCM mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve + + +// Enable this setting if you need secp192r1 (NIST 192-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve + + +// Enable this setting if you need secp224r1 (NIST 224-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve + + +// Enable this setting if you need secp256r1 (NIST 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED - Enable secp384r1 (NIST 384-bit) curve + + +// Enable this setting if you need secp384r1 (NIST 384-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED - Enable secp521r1 (NIST 521-bit) curve + + +// Enable this setting if you need secp521r1 (NIST 521-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED - Enable secp192k1 (Koblitz 192-bit) curve + + +// Enable this setting if you need secp192k1 (Koblitz 192-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED - Enable secp224k1 (Koblitz 224-bit) curve + + +// Enable this setting if you need secp224k1 (Koblitz 224-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve + + +// Enable this setting if you need secp256k1 (Koblitz 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED - Enable bp256r1 (Brainpool 256-bit) curve + + +// Enable this setting if you need bp256r1 (Brainpool 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED - Enable bp384r1 (Brainpool 384-bit) curve + + +// Enable this setting if you need bp384r1 (Brainpool 384-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED - Enable bp512r1 (Brainpool 512-bit) curve + + +// Enable this setting if you need bp512r1 (Brainpool 512-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED - Enable Curve25519 curve + + +// Enable this setting if you need Curve25519 support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED - Enable mbed TLS SHA-256 hash functionality. + + +// mbed TLS backend implementation for SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED - Enable mbed TLS SHA-512 hash functionality. + + +// mbed TLS backend implementation for SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED - Enable mbed TLS HMAC using SHA-256. + + +// mbed TLS backend implementation for HMAC using SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED - Enable mbed TLS HMAC using SHA-512. + + +// mbed TLS backend implementation for HMAC using SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED - Enable the micro-ecc backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve + + +// Enable this setting if you need secp192r1 (NIST 192-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve + + +// Enable this setting if you need secp224r1 (NIST 224-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve + + +// Enable this setting if you need secp256r1 (NIST 256-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve + + +// Enable this setting if you need secp256k1 (Koblitz 256-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED - Always trust raw public key (it will cause a security issue if the public key comes from an untrusted source) + + +// Enable this setting if you want to reduce flash usage. Only for use in nRF SDK DFU! Never enable it if the raw public key comes from an untrusted source. + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED 0 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED - Enable non-standard little endian byte order. + + +// This affects parameters for all ECC API (raw keys, signature, digest, shared secret). Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED 0 +#endif + +// + +// NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED - Enable the nRF HW RNG backend. + +// The nRF HW backend provide access to RNG peripheral in nRF5x devices. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED - Enable mbed TLS CTR-DRBG algorithm. + + +// Enable mbed TLS CTR-DRBG standardized by NIST (NIST SP 800-90A Rev. 1). The nRF HW RNG is used as an entropy source for seeding. + +#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_NRF_SW_ENABLED - Enable the legacy nRFx sw for crypto. + +// The nRF SW cryptography backend (only used in bootloader context). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED - nRF SW hash backend support for SHA-256 + + +// The nRF SW backend provide access to nRF SDK legacy hash implementation of SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED - nRF SW hash outputs digests in little endian + + +// Makes the nRF SH hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_OBERON_ENABLED - Enable the Oberon backend + +// The Oberon backend +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_OBERON_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using Oberon. + + +#ifndef NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED - Enable secp256r1 curve + + +// Enable this setting if you need secp256r1 curve support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED - Enable Curve25519 ECDH + + +// Enable this setting if you need Curve25519 ECDH support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED - Enable Ed25519 signature scheme + + +// Enable this setting if you need Ed25519 support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED - Oberon SHA-256 hash functionality + + +// Oberon backend implementation for SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED - Oberon SHA-512 hash functionality + + +// Oberon backend implementation for SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED - Oberon HMAC using SHA-256 + + +// Oberon backend implementation for HMAC using SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED - Oberon HMAC using SHA-512 + + +// Oberon backend implementation for HMAC using SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED 1 #endif // // -// +// //========================================================== -// nRF_DFU +// nRF_DFU //========================================================== // ble_dfu - Device Firmware Update //========================================================== // BLE_DFU_ENABLED - Enable DFU Service. - + #ifndef BLE_DFU_ENABLED #define BLE_DFU_ENABLED 0 #endif // NRF_DFU_BLE_BUTTONLESS_SUPPORTS_BONDS - Buttonless DFU supports bonds. - + #ifndef NRF_DFU_BLE_BUTTONLESS_SUPPORTS_BONDS #define NRF_DFU_BLE_BUTTONLESS_SUPPORTS_BONDS 0 #endif -// +// //========================================================== -// +// //========================================================== -// nRF_Drivers +// nRF_Drivers //========================================================== -// APP_USBD_ENABLED - app_usbd - USB Device library -//========================================================== -#ifndef APP_USBD_ENABLED -#define APP_USBD_ENABLED 0 -#endif -// APP_USBD_VID - Vendor ID <0x0000-0xFFFF> - - -// Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/ - -#ifndef APP_USBD_VID -#define APP_USBD_VID 0 -#endif - -// APP_USBD_PID - Product ID <0x0000-0xFFFF> - - -// Selected Product ID - -#ifndef APP_USBD_PID -#define APP_USBD_PID 0 -#endif - -// APP_USBD_DEVICE_VER_MAJOR - Device version, major part <0-99> - - -// Device version, will be converted automatically to BCD notation. Use just decimal values. - -#ifndef APP_USBD_DEVICE_VER_MAJOR -#define APP_USBD_DEVICE_VER_MAJOR 1 -#endif - -// APP_USBD_DEVICE_VER_MINOR - Device version, minor part <0-99> - - -// Device version, will be converted automatically to BCD notation. Use just decimal values. - -#ifndef APP_USBD_DEVICE_VER_MINOR -#define APP_USBD_DEVICE_VER_MINOR 0 -#endif - -// APP_USBD_EVENT_QUEUE_ENABLE - Enable event queue - -// This is the default configuration when all the events are placed into internal queue. -// Disable it when external queue is used like app_scheduler or if you wish to process all events inside interrupts. -// Processing all events from the interrupt level adds requirement not to call any functions that modifies the USBD library state from the context higher than USB interrupt context. -// Functions that modify USBD state are functions for sleep, wakeup, start, stop, enable and disable. -//========================================================== -#ifndef APP_USBD_EVENT_QUEUE_ENABLE -#define APP_USBD_EVENT_QUEUE_ENABLE 1 -#endif -// APP_USBD_EVENT_QUEUE_SIZE - The size of event queue <16-64> - - -// The size of the queue for the events that would be processed in the main loop. - -#ifndef APP_USBD_EVENT_QUEUE_SIZE -#define APP_USBD_EVENT_QUEUE_SIZE 32 -#endif - -// - -// APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module -//========================================================== -#ifndef APP_USBD_CONFIG_LOG_ENABLED -#define APP_USBD_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_CONFIG_LOG_LEVEL -#define APP_USBD_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CONFIG_INFO_COLOR -#define APP_USBD_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CONFIG_DEBUG_COLOR -#define APP_USBD_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// - -// CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver +// CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer //========================================================== #ifndef CLOCK_ENABLED #define CLOCK_ENABLED 0 #endif -// CLOCK_CONFIG_XTAL_FREQ - HF XTAL Frequency - -// <0=> Default (64 MHz) - -#ifndef CLOCK_CONFIG_XTAL_FREQ -#define CLOCK_CONFIG_XTAL_FREQ 0 -#endif - // CLOCK_CONFIG_LF_SRC - LF Clock Source - -// <0=> RC -// <1=> XTAL -// <2=> Synth + +// <0=> RC +// <1=> XTAL +// <2=> Synth #ifndef CLOCK_CONFIG_LF_SRC #define CLOCK_CONFIG_LF_SRC 1 #endif // CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef CLOCK_CONFIG_IRQ_PRIORITY #define CLOCK_CONFIG_IRQ_PRIORITY 7 @@ -1701,89 +1234,89 @@ // -// COMP_ENABLED - nrf_drv_comp - COMP peripheral driver +// COMP_ENABLED - nrf_drv_comp - COMP peripheral driver - legacy layer //========================================================== #ifndef COMP_ENABLED #define COMP_ENABLED 0 #endif // COMP_CONFIG_REF - Reference voltage - -// <0=> Internal 1.2V -// <1=> Internal 1.8V -// <2=> Internal 2.4V -// <4=> VDD -// <7=> ARef + +// <0=> Internal 1.2V +// <1=> Internal 1.8V +// <2=> Internal 2.4V +// <4=> VDD +// <7=> ARef #ifndef COMP_CONFIG_REF #define COMP_CONFIG_REF 1 #endif // COMP_CONFIG_MAIN_MODE - Main mode - -// <0=> Single ended -// <1=> Differential + +// <0=> Single ended +// <1=> Differential #ifndef COMP_CONFIG_MAIN_MODE #define COMP_CONFIG_MAIN_MODE 0 #endif // COMP_CONFIG_SPEED_MODE - Speed mode - -// <0=> Low power -// <1=> Normal -// <2=> High speed + +// <0=> Low power +// <1=> Normal +// <2=> High speed #ifndef COMP_CONFIG_SPEED_MODE #define COMP_CONFIG_SPEED_MODE 2 #endif // COMP_CONFIG_HYST - Hystheresis - -// <0=> No -// <1=> 50mV + +// <0=> No +// <1=> 50mV #ifndef COMP_CONFIG_HYST #define COMP_CONFIG_HYST 0 #endif // COMP_CONFIG_ISOURCE - Current Source - -// <0=> Off -// <1=> 2.5 uA -// <2=> 5 uA -// <3=> 10 uA + +// <0=> Off +// <1=> 2.5 uA +// <2=> 5 uA +// <3=> 10 uA #ifndef COMP_CONFIG_ISOURCE #define COMP_CONFIG_ISOURCE 0 #endif // COMP_CONFIG_INPUT - Analog input - -// <0=> 0 -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 + +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef COMP_CONFIG_INPUT #define COMP_CONFIG_INPUT 0 #endif // COMP_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef COMP_CONFIG_IRQ_PRIORITY #define COMP_CONFIG_IRQ_PRIORITY 7 @@ -1791,35 +1324,35 @@ // -// EGU_ENABLED - nrf_drv_swi - SWI(EGU) peripheral driver - +// EGU_ENABLED - nrf_drv_swi - SWI(EGU) peripheral driver - legacy layer + #ifndef EGU_ENABLED -#define EGU_ENABLED 1 +#define EGU_ENABLED 0 #endif -// GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver +// GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer //========================================================== #ifndef GPIOTE_ENABLED #define GPIOTE_ENABLED 1 #endif -// GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +// GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins #ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS -#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 +#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 #endif // GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef GPIOTE_CONFIG_IRQ_PRIORITY #define GPIOTE_CONFIG_IRQ_PRIORITY 7 @@ -1827,38 +1360,38 @@ // -// I2S_ENABLED - nrf_drv_i2s - I2S peripheral driver +// I2S_ENABLED - nrf_drv_i2s - I2S peripheral driver - legacy layer //========================================================== #ifndef I2S_ENABLED #define I2S_ENABLED 0 #endif -// I2S_CONFIG_SCK_PIN - SCK pin <0-31> +// I2S_CONFIG_SCK_PIN - SCK pin <0-31> #ifndef I2S_CONFIG_SCK_PIN #define I2S_CONFIG_SCK_PIN 31 #endif -// I2S_CONFIG_LRCK_PIN - LRCK pin <1-31> +// I2S_CONFIG_LRCK_PIN - LRCK pin <1-31> #ifndef I2S_CONFIG_LRCK_PIN #define I2S_CONFIG_LRCK_PIN 30 #endif -// I2S_CONFIG_MCK_PIN - MCK pin +// I2S_CONFIG_MCK_PIN - MCK pin #ifndef I2S_CONFIG_MCK_PIN #define I2S_CONFIG_MCK_PIN 255 #endif -// I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31> +// I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31> #ifndef I2S_CONFIG_SDOUT_PIN #define I2S_CONFIG_SDOUT_PIN 29 #endif -// I2S_CONFIG_SDIN_PIN - SDIN pin <0-31> +// I2S_CONFIG_SDIN_PIN - SDIN pin <0-31> #ifndef I2S_CONFIG_SDIN_PIN @@ -1866,186 +1399,237 @@ #endif // I2S_CONFIG_MASTER - Mode - -// <0=> Master -// <1=> Slave + +// <0=> Master +// <1=> Slave #ifndef I2S_CONFIG_MASTER #define I2S_CONFIG_MASTER 0 #endif // I2S_CONFIG_FORMAT - Format - -// <0=> I2S -// <1=> Aligned + +// <0=> I2S +// <1=> Aligned #ifndef I2S_CONFIG_FORMAT #define I2S_CONFIG_FORMAT 0 #endif // I2S_CONFIG_ALIGN - Alignment - -// <0=> Left -// <1=> Right + +// <0=> Left +// <1=> Right #ifndef I2S_CONFIG_ALIGN #define I2S_CONFIG_ALIGN 0 #endif // I2S_CONFIG_SWIDTH - Sample width (bits) - -// <0=> 8 -// <1=> 16 -// <2=> 24 + +// <0=> 8 +// <1=> 16 +// <2=> 24 #ifndef I2S_CONFIG_SWIDTH #define I2S_CONFIG_SWIDTH 1 #endif // I2S_CONFIG_CHANNELS - Channels - -// <0=> Stereo -// <1=> Left -// <2=> Right + +// <0=> Stereo +// <1=> Left +// <2=> Right #ifndef I2S_CONFIG_CHANNELS #define I2S_CONFIG_CHANNELS 1 #endif // I2S_CONFIG_MCK_SETUP - MCK behavior - -// <0=> Disabled -// <2147483648=> 32MHz/2 -// <1342177280=> 32MHz/3 -// <1073741824=> 32MHz/4 -// <805306368=> 32MHz/5 -// <671088640=> 32MHz/6 -// <536870912=> 32MHz/8 -// <402653184=> 32MHz/10 -// <369098752=> 32MHz/11 -// <285212672=> 32MHz/15 -// <268435456=> 32MHz/16 -// <201326592=> 32MHz/21 -// <184549376=> 32MHz/23 -// <142606336=> 32MHz/30 -// <138412032=> 32MHz/31 -// <134217728=> 32MHz/32 -// <100663296=> 32MHz/42 -// <68157440=> 32MHz/63 -// <34340864=> 32MHz/125 + +// <0=> Disabled +// <2147483648=> 32MHz/2 +// <1342177280=> 32MHz/3 +// <1073741824=> 32MHz/4 +// <805306368=> 32MHz/5 +// <671088640=> 32MHz/6 +// <536870912=> 32MHz/8 +// <402653184=> 32MHz/10 +// <369098752=> 32MHz/11 +// <285212672=> 32MHz/15 +// <268435456=> 32MHz/16 +// <201326592=> 32MHz/21 +// <184549376=> 32MHz/23 +// <142606336=> 32MHz/30 +// <138412032=> 32MHz/31 +// <134217728=> 32MHz/32 +// <100663296=> 32MHz/42 +// <68157440=> 32MHz/63 +// <34340864=> 32MHz/125 #ifndef I2S_CONFIG_MCK_SETUP #define I2S_CONFIG_MCK_SETUP 536870912 #endif // I2S_CONFIG_RATIO - MCK/LRCK ratio - -// <0=> 32x -// <1=> 48x -// <2=> 64x -// <3=> 96x -// <4=> 128x -// <5=> 192x -// <6=> 256x -// <7=> 384x -// <8=> 512x + +// <0=> 32x +// <1=> 48x +// <2=> 64x +// <3=> 96x +// <4=> 128x +// <5=> 192x +// <6=> 256x +// <7=> 384x +// <8=> 512x #ifndef I2S_CONFIG_RATIO #define I2S_CONFIG_RATIO 2000 #endif // I2S_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef I2S_CONFIG_IRQ_PRIORITY #define I2S_CONFIG_IRQ_PRIORITY 7 #endif +// I2S_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef I2S_CONFIG_LOG_ENABLED +#define I2S_CONFIG_LOG_ENABLED 0 +#endif +// I2S_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef I2S_CONFIG_LOG_LEVEL +#define I2S_CONFIG_LOG_LEVEL 3 +#endif + +// I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef I2S_CONFIG_INFO_COLOR +#define I2S_CONFIG_INFO_COLOR 0 +#endif + +// I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef I2S_CONFIG_DEBUG_COLOR +#define I2S_CONFIG_DEBUG_COLOR 0 +#endif + // -// LPCOMP_ENABLED - nrf_drv_lpcomp - LPCOMP peripheral driver +// + +// LPCOMP_ENABLED - nrf_drv_lpcomp - LPCOMP peripheral driver - legacy layer //========================================================== #ifndef LPCOMP_ENABLED #define LPCOMP_ENABLED 0 #endif // LPCOMP_CONFIG_REFERENCE - Reference voltage - -// <0=> Supply 1/8 -// <1=> Supply 2/8 -// <2=> Supply 3/8 -// <3=> Supply 4/8 -// <4=> Supply 5/8 -// <5=> Supply 6/8 -// <6=> Supply 7/8 -// <8=> Supply 1/16 (nRF52) -// <9=> Supply 3/16 (nRF52) -// <10=> Supply 5/16 (nRF52) -// <11=> Supply 7/16 (nRF52) -// <12=> Supply 9/16 (nRF52) -// <13=> Supply 11/16 (nRF52) -// <14=> Supply 13/16 (nRF52) -// <15=> Supply 15/16 (nRF52) -// <7=> External Ref 0 -// <65543=> External Ref 1 + +// <0=> Supply 1/8 +// <1=> Supply 2/8 +// <2=> Supply 3/8 +// <3=> Supply 4/8 +// <4=> Supply 5/8 +// <5=> Supply 6/8 +// <6=> Supply 7/8 +// <8=> Supply 1/16 (nRF52) +// <9=> Supply 3/16 (nRF52) +// <10=> Supply 5/16 (nRF52) +// <11=> Supply 7/16 (nRF52) +// <12=> Supply 9/16 (nRF52) +// <13=> Supply 11/16 (nRF52) +// <14=> Supply 13/16 (nRF52) +// <15=> Supply 15/16 (nRF52) +// <7=> External Ref 0 +// <65543=> External Ref 1 #ifndef LPCOMP_CONFIG_REFERENCE #define LPCOMP_CONFIG_REFERENCE 3 #endif // LPCOMP_CONFIG_DETECTION - Detection - -// <0=> Crossing -// <1=> Up -// <2=> Down + +// <0=> Crossing +// <1=> Up +// <2=> Down #ifndef LPCOMP_CONFIG_DETECTION #define LPCOMP_CONFIG_DETECTION 2 #endif // LPCOMP_CONFIG_INPUT - Analog input - -// <0=> 0 -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 + +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef LPCOMP_CONFIG_INPUT #define LPCOMP_CONFIG_INPUT 0 #endif // LPCOMP_CONFIG_HYST - Hysteresis - + #ifndef LPCOMP_CONFIG_HYST #define LPCOMP_CONFIG_HYST 0 #endif // LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef LPCOMP_CONFIG_IRQ_PRIORITY #define LPCOMP_CONFIG_IRQ_PRIORITY 7 @@ -2053,43 +1637,2214 @@ // -// PDM_ENABLED - nrf_drv_pdm - PDM peripheral driver +// NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver //========================================================== -#ifndef PDM_ENABLED -#define PDM_ENABLED 0 +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 0 #endif -// PDM_CONFIG_MODE - Mode +// NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth -// <0=> Stereo -// <1=> Mono - -#ifndef PDM_CONFIG_MODE -#define PDM_CONFIG_MODE 1 +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 #endif -// PDM_CONFIG_EDGE - Edge +// NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 -// <0=> Left falling -// <1=> Left rising - -#ifndef PDM_CONFIG_EDGE -#define PDM_CONFIG_EDGE 0 +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 #endif -// PDM_CONFIG_CLOCK_FREQ - Clock frequency +// NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug -// <134217728=> 1000k -// <138412032=> 1032k (default) -// <142606336=> 1067k - -#ifndef PDM_CONFIG_CLOCK_FREQ -#define PDM_CONFIG_CLOCK_FREQ 138412032 +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 #endif -// PDM_CONFIG_IRQ_PRIORITY - Interrupt priority +// NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver +//========================================================== +#ifndef NRFX_COMP_ENABLED +#define NRFX_COMP_ENABLED 0 +#endif +// NRFX_COMP_CONFIG_REF - Reference voltage + +// <0=> Internal 1.2V +// <1=> Internal 1.8V +// <2=> Internal 2.4V +// <4=> VDD +// <7=> ARef + +#ifndef NRFX_COMP_CONFIG_REF +#define NRFX_COMP_CONFIG_REF 1 +#endif + +// NRFX_COMP_CONFIG_MAIN_MODE - Main mode + +// <0=> Single ended +// <1=> Differential + +#ifndef NRFX_COMP_CONFIG_MAIN_MODE +#define NRFX_COMP_CONFIG_MAIN_MODE 0 +#endif + +// NRFX_COMP_CONFIG_SPEED_MODE - Speed mode + +// <0=> Low power +// <1=> Normal +// <2=> High speed + +#ifndef NRFX_COMP_CONFIG_SPEED_MODE +#define NRFX_COMP_CONFIG_SPEED_MODE 2 +#endif + +// NRFX_COMP_CONFIG_HYST - Hystheresis + +// <0=> No +// <1=> 50mV + +#ifndef NRFX_COMP_CONFIG_HYST +#define NRFX_COMP_CONFIG_HYST 0 +#endif + +// NRFX_COMP_CONFIG_ISOURCE - Current Source + +// <0=> Off +// <1=> 2.5 uA +// <2=> 5 uA +// <3=> 10 uA + +#ifndef NRFX_COMP_CONFIG_ISOURCE +#define NRFX_COMP_CONFIG_ISOURCE 0 +#endif + +// NRFX_COMP_CONFIG_INPUT - Analog input + +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_COMP_CONFIG_INPUT +#define NRFX_COMP_CONFIG_INPUT 0 +#endif + +// NRFX_COMP_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY +#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_COMP_CONFIG_LOG_ENABLED +#define NRFX_COMP_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_COMP_CONFIG_LOG_LEVEL +#define NRFX_COMP_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_COMP_CONFIG_INFO_COLOR +#define NRFX_COMP_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR +#define NRFX_COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver +//========================================================== +#ifndef NRFX_GPIOTE_ENABLED +#define NRFX_GPIOTE_ENABLED 0 +#endif +// NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS +#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 +#endif + +// NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY +#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED +#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL +#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR +#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR +#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver +//========================================================== +#ifndef NRFX_I2S_ENABLED +#define NRFX_I2S_ENABLED 0 +#endif +// NRFX_I2S_CONFIG_SCK_PIN - SCK pin <0-31> -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +#ifndef NRFX_I2S_CONFIG_SCK_PIN +#define NRFX_I2S_CONFIG_SCK_PIN 31 +#endif + +// NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin <1-31> + + +#ifndef NRFX_I2S_CONFIG_LRCK_PIN +#define NRFX_I2S_CONFIG_LRCK_PIN 30 +#endif + +// NRFX_I2S_CONFIG_MCK_PIN - MCK pin +#ifndef NRFX_I2S_CONFIG_MCK_PIN +#define NRFX_I2S_CONFIG_MCK_PIN 255 +#endif + +// NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31> + + +#ifndef NRFX_I2S_CONFIG_SDOUT_PIN +#define NRFX_I2S_CONFIG_SDOUT_PIN 29 +#endif + +// NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin <0-31> + + +#ifndef NRFX_I2S_CONFIG_SDIN_PIN +#define NRFX_I2S_CONFIG_SDIN_PIN 28 +#endif + +// NRFX_I2S_CONFIG_MASTER - Mode + +// <0=> Master +// <1=> Slave + +#ifndef NRFX_I2S_CONFIG_MASTER +#define NRFX_I2S_CONFIG_MASTER 0 +#endif + +// NRFX_I2S_CONFIG_FORMAT - Format + +// <0=> I2S +// <1=> Aligned + +#ifndef NRFX_I2S_CONFIG_FORMAT +#define NRFX_I2S_CONFIG_FORMAT 0 +#endif + +// NRFX_I2S_CONFIG_ALIGN - Alignment + +// <0=> Left +// <1=> Right + +#ifndef NRFX_I2S_CONFIG_ALIGN +#define NRFX_I2S_CONFIG_ALIGN 0 +#endif + +// NRFX_I2S_CONFIG_SWIDTH - Sample width (bits) + +// <0=> 8 +// <1=> 16 +// <2=> 24 + +#ifndef NRFX_I2S_CONFIG_SWIDTH +#define NRFX_I2S_CONFIG_SWIDTH 1 +#endif + +// NRFX_I2S_CONFIG_CHANNELS - Channels + +// <0=> Stereo +// <1=> Left +// <2=> Right + +#ifndef NRFX_I2S_CONFIG_CHANNELS +#define NRFX_I2S_CONFIG_CHANNELS 1 +#endif + +// NRFX_I2S_CONFIG_MCK_SETUP - MCK behavior + +// <0=> Disabled +// <2147483648=> 32MHz/2 +// <1342177280=> 32MHz/3 +// <1073741824=> 32MHz/4 +// <805306368=> 32MHz/5 +// <671088640=> 32MHz/6 +// <536870912=> 32MHz/8 +// <402653184=> 32MHz/10 +// <369098752=> 32MHz/11 +// <285212672=> 32MHz/15 +// <268435456=> 32MHz/16 +// <201326592=> 32MHz/21 +// <184549376=> 32MHz/23 +// <142606336=> 32MHz/30 +// <138412032=> 32MHz/31 +// <134217728=> 32MHz/32 +// <100663296=> 32MHz/42 +// <68157440=> 32MHz/63 +// <34340864=> 32MHz/125 + +#ifndef NRFX_I2S_CONFIG_MCK_SETUP +#define NRFX_I2S_CONFIG_MCK_SETUP 536870912 +#endif + +// NRFX_I2S_CONFIG_RATIO - MCK/LRCK ratio + +// <0=> 32x +// <1=> 48x +// <2=> 64x +// <3=> 96x +// <4=> 128x +// <5=> 192x +// <6=> 256x +// <7=> 384x +// <8=> 512x + +#ifndef NRFX_I2S_CONFIG_RATIO +#define NRFX_I2S_CONFIG_RATIO 2000 +#endif + +// NRFX_I2S_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY +#define NRFX_I2S_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_I2S_CONFIG_LOG_ENABLED +#define NRFX_I2S_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_I2S_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_I2S_CONFIG_LOG_LEVEL +#define NRFX_I2S_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_I2S_CONFIG_INFO_COLOR +#define NRFX_I2S_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR +#define NRFX_I2S_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver +//========================================================== +#ifndef NRFX_LPCOMP_ENABLED +#define NRFX_LPCOMP_ENABLED 0 +#endif +// NRFX_LPCOMP_CONFIG_REFERENCE - Reference voltage + +// <0=> Supply 1/8 +// <1=> Supply 2/8 +// <2=> Supply 3/8 +// <3=> Supply 4/8 +// <4=> Supply 5/8 +// <5=> Supply 6/8 +// <6=> Supply 7/8 +// <8=> Supply 1/16 (nRF52) +// <9=> Supply 3/16 (nRF52) +// <10=> Supply 5/16 (nRF52) +// <11=> Supply 7/16 (nRF52) +// <12=> Supply 9/16 (nRF52) +// <13=> Supply 11/16 (nRF52) +// <14=> Supply 13/16 (nRF52) +// <15=> Supply 15/16 (nRF52) +// <7=> External Ref 0 +// <65543=> External Ref 1 + +#ifndef NRFX_LPCOMP_CONFIG_REFERENCE +#define NRFX_LPCOMP_CONFIG_REFERENCE 3 +#endif + +// NRFX_LPCOMP_CONFIG_DETECTION - Detection + +// <0=> Crossing +// <1=> Up +// <2=> Down + +#ifndef NRFX_LPCOMP_CONFIG_DETECTION +#define NRFX_LPCOMP_CONFIG_DETECTION 2 +#endif + +// NRFX_LPCOMP_CONFIG_INPUT - Analog input + +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_LPCOMP_CONFIG_INPUT +#define NRFX_LPCOMP_CONFIG_INPUT 0 +#endif + +// NRFX_LPCOMP_CONFIG_HYST - Hysteresis + + +#ifndef NRFX_LPCOMP_CONFIG_HYST +#define NRFX_LPCOMP_CONFIG_HYST 0 +#endif + +// NRFX_LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY +#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED +#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL +#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR +#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR +#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver +//========================================================== +#ifndef NRFX_PDM_ENABLED +#define NRFX_PDM_ENABLED 0 +#endif +// NRFX_PDM_CONFIG_MODE - Mode + +// <0=> Stereo +// <1=> Mono + +#ifndef NRFX_PDM_CONFIG_MODE +#define NRFX_PDM_CONFIG_MODE 1 +#endif + +// NRFX_PDM_CONFIG_EDGE - Edge + +// <0=> Left falling +// <1=> Left rising + +#ifndef NRFX_PDM_CONFIG_EDGE +#define NRFX_PDM_CONFIG_EDGE 0 +#endif + +// NRFX_PDM_CONFIG_CLOCK_FREQ - Clock frequency + +// <134217728=> 1000k +// <138412032=> 1032k (default) +// <142606336=> 1067k + +#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ +#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032 +#endif + +// NRFX_PDM_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY +#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_PDM_CONFIG_LOG_ENABLED +#define NRFX_PDM_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_PDM_CONFIG_LOG_LEVEL +#define NRFX_PDM_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PDM_CONFIG_INFO_COLOR +#define NRFX_PDM_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR +#define NRFX_PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver +//========================================================== +#ifndef NRFX_POWER_ENABLED +#define NRFX_POWER_ENABLED 0 +#endif +// NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY +#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN +#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV +#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// + +// NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator +//========================================================== +#ifndef NRFX_PPI_ENABLED +#define NRFX_PPI_ENABLED 0 +#endif +// NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_PPI_CONFIG_LOG_ENABLED +#define NRFX_PPI_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_PPI_CONFIG_LOG_LEVEL +#define NRFX_PPI_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PPI_CONFIG_INFO_COLOR +#define NRFX_PPI_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR +#define NRFX_PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver +//========================================================== +#ifndef NRFX_PWM_ENABLED +#define NRFX_PWM_ENABLED 0 +#endif +// NRFX_PWM0_ENABLED - Enable PWM0 instance + + +#ifndef NRFX_PWM0_ENABLED +#define NRFX_PWM0_ENABLED 0 +#endif + +// NRFX_PWM1_ENABLED - Enable PWM1 instance + + +#ifndef NRFX_PWM1_ENABLED +#define NRFX_PWM1_ENABLED 0 +#endif + +// NRFX_PWM2_ENABLED - Enable PWM2 instance + + +#ifndef NRFX_PWM2_ENABLED +#define NRFX_PWM2_ENABLED 0 +#endif + +// NRFX_PWM3_ENABLED - Enable PWM3 instance + + +#ifndef NRFX_PWM3_ENABLED +#define NRFX_PWM3_ENABLED 0 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31> + + +#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN +#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31> + + +#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN +#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31> + + +#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN +#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31> + + +#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN +#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock + +// <0=> 16 MHz +// <1=> 8 MHz +// <2=> 4 MHz +// <3=> 2 MHz +// <4=> 1 MHz +// <5=> 500 kHz +// <6=> 250 kHz +// <7=> 125 kHz + +#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK +#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode + +// <0=> Up +// <1=> Up and Down + +#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE +#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value +#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE +#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode + +// <0=> Common +// <1=> Grouped +// <2=> Individual +// <3=> Waveform + +#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE +#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_STEP_MODE - Step mode + +// <0=> Auto +// <1=> Triggered + +#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE +#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0 +#endif + +// NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_PWM_CONFIG_LOG_ENABLED +#define NRFX_PWM_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_PWM_CONFIG_LOG_LEVEL +#define NRFX_PWM_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PWM_CONFIG_INFO_COLOR +#define NRFX_PWM_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR +#define NRFX_PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver +//========================================================== +#ifndef NRFX_QDEC_ENABLED +#define NRFX_QDEC_ENABLED 0 +#endif +// NRFX_QDEC_CONFIG_REPORTPER - Report period + +// <0=> 10 Samples +// <1=> 40 Samples +// <2=> 80 Samples +// <3=> 120 Samples +// <4=> 160 Samples +// <5=> 200 Samples +// <6=> 240 Samples +// <7=> 280 Samples + +#ifndef NRFX_QDEC_CONFIG_REPORTPER +#define NRFX_QDEC_CONFIG_REPORTPER 0 +#endif + +// NRFX_QDEC_CONFIG_SAMPLEPER - Sample period + +// <0=> 128 us +// <1=> 256 us +// <2=> 512 us +// <3=> 1024 us +// <4=> 2048 us +// <5=> 4096 us +// <6=> 8192 us +// <7=> 16384 us + +#ifndef NRFX_QDEC_CONFIG_SAMPLEPER +#define NRFX_QDEC_CONFIG_SAMPLEPER 7 +#endif + +// NRFX_QDEC_CONFIG_PIO_A - A pin <0-31> + + +#ifndef NRFX_QDEC_CONFIG_PIO_A +#define NRFX_QDEC_CONFIG_PIO_A 31 +#endif + +// NRFX_QDEC_CONFIG_PIO_B - B pin <0-31> + + +#ifndef NRFX_QDEC_CONFIG_PIO_B +#define NRFX_QDEC_CONFIG_PIO_B 31 +#endif + +// NRFX_QDEC_CONFIG_PIO_LED - LED pin <0-31> + + +#ifndef NRFX_QDEC_CONFIG_PIO_LED +#define NRFX_QDEC_CONFIG_PIO_LED 31 +#endif + +// NRFX_QDEC_CONFIG_LEDPRE - LED pre +#ifndef NRFX_QDEC_CONFIG_LEDPRE +#define NRFX_QDEC_CONFIG_LEDPRE 511 +#endif + +// NRFX_QDEC_CONFIG_LEDPOL - LED polarity + +// <0=> Active low +// <1=> Active high + +#ifndef NRFX_QDEC_CONFIG_LEDPOL +#define NRFX_QDEC_CONFIG_LEDPOL 1 +#endif + +// NRFX_QDEC_CONFIG_DBFEN - Debouncing enable + + +#ifndef NRFX_QDEC_CONFIG_DBFEN +#define NRFX_QDEC_CONFIG_DBFEN 0 +#endif + +// NRFX_QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable + + +#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN +#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0 +#endif + +// NRFX_QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY +#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED +#define NRFX_QDEC_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL +#define NRFX_QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_QDEC_CONFIG_INFO_COLOR +#define NRFX_QDEC_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR +#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_QSPI_ENABLED - nrfx_qspi - QSPI peripheral driver +//========================================================== +#ifndef NRFX_QSPI_ENABLED +#define NRFX_QSPI_ENABLED 0 +#endif +// NRFX_QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns). <0-255> + + +#ifndef NRFX_QSPI_CONFIG_SCK_DELAY +#define NRFX_QSPI_CONFIG_SCK_DELAY 1 +#endif + +// NRFX_QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation. +#ifndef NRFX_QSPI_CONFIG_XIP_OFFSET +#define NRFX_QSPI_CONFIG_XIP_OFFSET 0 +#endif + +// NRFX_QSPI_CONFIG_READOC - Number of data lines and opcode used for reading. + +// <0=> FastRead +// <1=> Read2O +// <2=> Read2IO +// <3=> Read4O +// <4=> Read4IO + +#ifndef NRFX_QSPI_CONFIG_READOC +#define NRFX_QSPI_CONFIG_READOC 0 +#endif + +// NRFX_QSPI_CONFIG_WRITEOC - Number of data lines and opcode used for writing. + +// <0=> PP +// <1=> PP2O +// <2=> PP4O +// <3=> PP4IO + +#ifndef NRFX_QSPI_CONFIG_WRITEOC +#define NRFX_QSPI_CONFIG_WRITEOC 0 +#endif + +// NRFX_QSPI_CONFIG_ADDRMODE - Addressing mode. + +// <0=> 24bit +// <1=> 32bit + +#ifndef NRFX_QSPI_CONFIG_ADDRMODE +#define NRFX_QSPI_CONFIG_ADDRMODE 0 +#endif + +// NRFX_QSPI_CONFIG_MODE - SPI mode. + +// <0=> Mode 0 +// <1=> Mode 1 + +#ifndef NRFX_QSPI_CONFIG_MODE +#define NRFX_QSPI_CONFIG_MODE 0 +#endif + +// NRFX_QSPI_CONFIG_FREQUENCY - Frequency divider. + +// <0=> 32MHz/1 +// <1=> 32MHz/2 +// <2=> 32MHz/3 +// <3=> 32MHz/4 +// <4=> 32MHz/5 +// <5=> 32MHz/6 +// <6=> 32MHz/7 +// <7=> 32MHz/8 +// <8=> 32MHz/9 +// <9=> 32MHz/10 +// <10=> 32MHz/11 +// <11=> 32MHz/12 +// <12=> 32MHz/13 +// <13=> 32MHz/14 +// <14=> 32MHz/15 +// <15=> 32MHz/16 + +#ifndef NRFX_QSPI_CONFIG_FREQUENCY +#define NRFX_QSPI_CONFIG_FREQUENCY 15 +#endif + +// NRFX_QSPI_PIN_SCK - SCK pin value. +#ifndef NRFX_QSPI_PIN_SCK +#define NRFX_QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_CSN - CSN pin value. +#ifndef NRFX_QSPI_PIN_CSN +#define NRFX_QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO0 - IO0 pin value. +#ifndef NRFX_QSPI_PIN_IO0 +#define NRFX_QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO1 - IO1 pin value. +#ifndef NRFX_QSPI_PIN_IO1 +#define NRFX_QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO2 - IO2 pin value. +#ifndef NRFX_QSPI_PIN_IO2 +#define NRFX_QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO3 - IO3 pin value. +#ifndef NRFX_QSPI_PIN_IO3 +#define NRFX_QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_QSPI_CONFIG_IRQ_PRIORITY +#define NRFX_QSPI_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver +//========================================================== +#ifndef NRFX_RNG_ENABLED +#define NRFX_RNG_ENABLED 0 +#endif +// NRFX_RNG_CONFIG_ERROR_CORRECTION - Error correction + + +#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION +#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1 +#endif + +// NRFX_RNG_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY +#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_RNG_CONFIG_LOG_ENABLED +#define NRFX_RNG_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_RNG_CONFIG_LOG_LEVEL +#define NRFX_RNG_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_RNG_CONFIG_INFO_COLOR +#define NRFX_RNG_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR +#define NRFX_RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver +//========================================================== +#ifndef NRFX_RTC_ENABLED +#define NRFX_RTC_ENABLED 0 +#endif +// NRFX_RTC0_ENABLED - Enable RTC0 instance + + +#ifndef NRFX_RTC0_ENABLED +#define NRFX_RTC0_ENABLED 0 +#endif + +// NRFX_RTC1_ENABLED - Enable RTC1 instance + + +#ifndef NRFX_RTC1_ENABLED +#define NRFX_RTC1_ENABLED 0 +#endif + +// NRFX_RTC2_ENABLED - Enable RTC2 instance + + +#ifndef NRFX_RTC2_ENABLED +#define NRFX_RTC2_ENABLED 0 +#endif + +// NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt +#ifndef NRFX_RTC_MAXIMUM_LATENCY_US +#define NRFX_RTC_MAXIMUM_LATENCY_US 2000 +#endif + +// NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768> + + +#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY +#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768 +#endif + +// NRFX_RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering + + +#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE +#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0 +#endif + +// NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_RTC_CONFIG_LOG_ENABLED +#define NRFX_RTC_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_RTC_CONFIG_LOG_LEVEL +#define NRFX_RTC_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_RTC_CONFIG_INFO_COLOR +#define NRFX_RTC_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR +#define NRFX_RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver +//========================================================== +#ifndef NRFX_SAADC_ENABLED +#define NRFX_SAADC_ENABLED 0 +#endif +// NRFX_SAADC_CONFIG_RESOLUTION - Resolution + +// <0=> 8 bit +// <1=> 10 bit +// <2=> 12 bit +// <3=> 14 bit + +#ifndef NRFX_SAADC_CONFIG_RESOLUTION +#define NRFX_SAADC_CONFIG_RESOLUTION 1 +#endif + +// NRFX_SAADC_CONFIG_OVERSAMPLE - Sample period + +// <0=> Disabled +// <1=> 2x +// <2=> 4x +// <3=> 8x +// <4=> 16x +// <5=> 32x +// <6=> 64x +// <7=> 128x +// <8=> 256x + +#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE +#define NRFX_SAADC_CONFIG_OVERSAMPLE 0 +#endif + +// NRFX_SAADC_CONFIG_LP_MODE - Enabling low power mode + + +#ifndef NRFX_SAADC_CONFIG_LP_MODE +#define NRFX_SAADC_CONFIG_LP_MODE 0 +#endif + +// NRFX_SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY +#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED +#define NRFX_SAADC_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL +#define NRFX_SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SAADC_CONFIG_INFO_COLOR +#define NRFX_SAADC_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR +#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// needed to build +#define NRFX_SPIM0_ENABLED 1 +#define NRFX_SPIM1_ENABLED 1 +#define NRFX_SPIM2_ENABLED 1 + + +// NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver +//========================================================== +#ifndef NRFX_SPIM_ENABLED +#define NRFX_SPIM_ENABLED 0 +#endif +// NRFX_SPIM0_ENABLED - Enable SPIM0 instance + + +#ifndef NRFX_SPIM0_ENABLED +#define NRFX_SPIM0_ENABLED 0 +#endif + +// NRFX_SPIM1_ENABLED - Enable SPIM1 instance + + +#ifndef NRFX_SPIM1_ENABLED +#define NRFX_SPIM1_ENABLED 0 +#endif + +// NRFX_SPIM2_ENABLED - Enable SPIM2 instance + + +#ifndef NRFX_SPIM2_ENABLED +#define NRFX_SPIM2_ENABLED 0 +#endif + +// NRFX_SPIM3_ENABLED - Enable SPIM3 instance + + +#ifndef NRFX_SPIM3_ENABLED +#define NRFX_SPIM3_ENABLED 0 +#endif + +// NRFX_SPIM_EXTENDED_ENABLED - Enable extended SPIM features + + +#ifndef NRFX_SPIM_EXTENDED_ENABLED +#define NRFX_SPIM_EXTENDED_ENABLED 0 +#endif + +// NRFX_SPIM_MISO_PULL_CFG - MISO pin pull configuration. + +// <0=> NRF_GPIO_PIN_NOPULL +// <1=> NRF_GPIO_PIN_PULLDOWN +// <3=> NRF_GPIO_PIN_PULLUP + +#ifndef NRFX_SPIM_MISO_PULL_CFG +#define NRFX_SPIM_MISO_PULL_CFG 1 +#endif + +// NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED +#define NRFX_SPIM_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL +#define NRFX_SPIM_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPIM_CONFIG_INFO_COLOR +#define NRFX_SPIM_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR +#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver +//========================================================== +#ifndef NRFX_SPIS_ENABLED +#define NRFX_SPIS_ENABLED 0 +#endif +// NRFX_SPIS0_ENABLED - Enable SPIS0 instance + + +#ifndef NRFX_SPIS0_ENABLED +#define NRFX_SPIS0_ENABLED 0 +#endif + +// NRFX_SPIS1_ENABLED - Enable SPIS1 instance + + +#ifndef NRFX_SPIS1_ENABLED +#define NRFX_SPIS1_ENABLED 0 +#endif + +// NRFX_SPIS2_ENABLED - Enable SPIS2 instance + + +#ifndef NRFX_SPIS2_ENABLED +#define NRFX_SPIS2_ENABLED 0 +#endif + +// NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255> + + +#ifndef NRFX_SPIS_DEFAULT_DEF +#define NRFX_SPIS_DEFAULT_DEF 255 +#endif + +// NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255> + + +#ifndef NRFX_SPIS_DEFAULT_ORC +#define NRFX_SPIS_DEFAULT_ORC 255 +#endif + +// NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED +#define NRFX_SPIS_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL +#define NRFX_SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPIS_CONFIG_INFO_COLOR +#define NRFX_SPIS_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR +#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver +//========================================================== + +#ifndef NRFX_SPI_ENABLED +#define NRFX_SPI_ENABLED 1 +#endif +// NRFX_SPI0_ENABLED - Enable SPI0 instance + + +#ifndef NRFX_SPI0_ENABLED +#define NRFX_SPI0_ENABLED 1 +#endif + +// NRFX_SPI1_ENABLED - Enable SPI1 instance + + +#ifndef NRFX_SPI1_ENABLED +#define NRFX_SPI1_ENABLED 0 +#endif + +// NRFX_SPI2_ENABLED - Enable SPI2 instance + + +#ifndef NRFX_SPI2_ENABLED +#define NRFX_SPI2_ENABLED 0 +#endif + +// NRFX_SPI_MISO_PULL_CFG - MISO pin pull configuration. + +// <0=> NRF_GPIO_PIN_NOPULL +// <1=> NRF_GPIO_PIN_PULLDOWN +// <3=> NRF_GPIO_PIN_PULLUP + +#ifndef NRFX_SPI_MISO_PULL_CFG +#define NRFX_SPI_MISO_PULL_CFG 1 +#endif + +// NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SPI_CONFIG_LOG_ENABLED +#define NRFX_SPI_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SPI_CONFIG_LOG_LEVEL +#define NRFX_SPI_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPI_CONFIG_INFO_COLOR +#define NRFX_SPI_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR +#define NRFX_SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator +//========================================================== +#ifndef NRFX_SWI_ENABLED +#define NRFX_SWI_ENABLED 0 +#endif +// NRFX_EGU_ENABLED - Enable EGU support + + +#ifndef NRFX_EGU_ENABLED +#define NRFX_EGU_ENABLED 0 +#endif + +// NRFX_SWI0_DISABLED - Exclude SWI0 from being utilized by the driver + + +#ifndef NRFX_SWI0_DISABLED +#define NRFX_SWI0_DISABLED 0 +#endif + +// NRFX_SWI1_DISABLED - Exclude SWI1 from being utilized by the driver + + +#ifndef NRFX_SWI1_DISABLED +#define NRFX_SWI1_DISABLED 0 +#endif + +// NRFX_SWI2_DISABLED - Exclude SWI2 from being utilized by the driver + + +#ifndef NRFX_SWI2_DISABLED +#define NRFX_SWI2_DISABLED 0 +#endif + +// NRFX_SWI3_DISABLED - Exclude SWI3 from being utilized by the driver + + +#ifndef NRFX_SWI3_DISABLED +#define NRFX_SWI3_DISABLED 0 +#endif + +// NRFX_SWI4_DISABLED - Exclude SWI4 from being utilized by the driver + + +#ifndef NRFX_SWI4_DISABLED +#define NRFX_SWI4_DISABLED 0 +#endif + +// NRFX_SWI5_DISABLED - Exclude SWI5 from being utilized by the driver + + +#ifndef NRFX_SWI5_DISABLED +#define NRFX_SWI5_DISABLED 0 +#endif + +// NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SWI_CONFIG_LOG_ENABLED +#define NRFX_SWI_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SWI_CONFIG_LOG_LEVEL +#define NRFX_SWI_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SWI_CONFIG_INFO_COLOR +#define NRFX_SWI_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR +#define NRFX_SWI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver +//========================================================== +#ifndef NRFX_TIMER_ENABLED +#define NRFX_TIMER_ENABLED 0 +#endif +// NRFX_TIMER0_ENABLED - Enable TIMER0 instance + + +#ifndef NRFX_TIMER0_ENABLED +#define NRFX_TIMER0_ENABLED 0 +#endif + +// NRFX_TIMER1_ENABLED - Enable TIMER1 instance + + +#ifndef NRFX_TIMER1_ENABLED +#define NRFX_TIMER1_ENABLED 0 +#endif + +// NRFX_TIMER2_ENABLED - Enable TIMER2 instance + + +#ifndef NRFX_TIMER2_ENABLED +#define NRFX_TIMER2_ENABLED 0 +#endif + +// NRFX_TIMER3_ENABLED - Enable TIMER3 instance + + +#ifndef NRFX_TIMER3_ENABLED +#define NRFX_TIMER3_ENABLED 0 +#endif + +// NRFX_TIMER4_ENABLED - Enable TIMER4 instance + + +#ifndef NRFX_TIMER4_ENABLED +#define NRFX_TIMER4_ENABLED 0 +#endif + +// NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode + +// <0=> 16 MHz +// <1=> 8 MHz +// <2=> 4 MHz +// <3=> 2 MHz +// <4=> 1 MHz +// <5=> 500 kHz +// <6=> 250 kHz +// <7=> 125 kHz +// <8=> 62.5 kHz +// <9=> 31.25 kHz + +#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY +#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0 +#endif + +// NRFX_TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation + +// <0=> Timer +// <1=> Counter + +#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE +#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0 +#endif + +// NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width + +// <0=> 16 bit +// <1=> 8 bit +// <2=> 24 bit +// <3=> 32 bit + +#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH +#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0 +#endif + +// NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED +#define NRFX_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL +#define NRFX_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TIMER_CONFIG_INFO_COLOR +#define NRFX_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR +#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver +//========================================================== +#ifndef NRFX_TWIM_ENABLED +#define NRFX_TWIM_ENABLED 1 +#endif +// NRFX_TWIM0_ENABLED - Enable TWIM0 instance + + +#ifndef NRFX_TWIM0_ENABLED +#define NRFX_TWIM0_ENABLED 1 +#endif + +// NRFX_TWIM1_ENABLED - Enable TWIM1 instance + + +#ifndef NRFX_TWIM1_ENABLED +#define NRFX_TWIM1_ENABLED 1 +#endif + +// NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY - Frequency + +// <26738688=> 100k +// <67108864=> 250k +// <104857600=> 400k + +#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY +#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688 +#endif + +// NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit + + +#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT +#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0 +#endif + +// NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + // <0=> 0 (highest) // <1=> 1 // <2=> 2 @@ -2099,43 +3854,717 @@ // <6=> 6 // <7=> 7 +#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED +#define NRFX_TWIM_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_TWIM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL +#define NRFX_TWIM_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TWIM_CONFIG_INFO_COLOR +#define NRFX_TWIM_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR +#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver +//========================================================== +#ifndef NRFX_TWIS_ENABLED +#define NRFX_TWIS_ENABLED 0 +#endif +// NRFX_TWIS0_ENABLED - Enable TWIS0 instance + + +#ifndef NRFX_TWIS0_ENABLED +#define NRFX_TWIS0_ENABLED 0 +#endif + +// NRFX_TWIS1_ENABLED - Enable TWIS1 instance + + +#ifndef NRFX_TWIS1_ENABLED +#define NRFX_TWIS1_ENABLED 0 +#endif + +// NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once + + +// Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. + +#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY +#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0 +#endif + +// NRFX_TWIS_NO_SYNC_MODE - Remove support for synchronous mode + + +// Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. + +#ifndef NRFX_TWIS_NO_SYNC_MODE +#define NRFX_TWIS_NO_SYNC_MODE 0 +#endif + +// NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0 +#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0 +#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0 +#endif + +// NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1 +#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1 +#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0 +#endif + +// NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration + +// <0=> Disabled +// <1=> Pull down +// <3=> Pull up + +#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL +#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0 +#endif + +// NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration + +// <0=> Disabled +// <1=> Pull down +// <3=> Pull up + +#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL +#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0 +#endif + +// NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED +#define NRFX_TWIS_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL +#define NRFX_TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TWIS_CONFIG_INFO_COLOR +#define NRFX_TWIS_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR +#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver +//========================================================== + +#ifndef NRFX_TWI_ENABLED +#define NRFX_TWI_ENABLED 1 +#endif +// NRFX_TWI0_ENABLED - Enable TWI0 instance + + +#ifndef NRFX_TWI0_ENABLED +#define NRFX_TWI0_ENABLED 1 +#endif + +// NRFX_TWI1_ENABLED - Enable TWI1 instance + + +#ifndef NRFX_TWI1_ENABLED +#define NRFX_TWI1_ENABLED 1 +#endif + +// NRFX_TWI_DEFAULT_CONFIG_FREQUENCY - Frequency + +// <26738688=> 100k +// <67108864=> 250k +// <104857600=> 400k + +#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY +#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688 +#endif + +// NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit + + +#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT +#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0 +#endif + +// NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_TWI_CONFIG_LOG_ENABLED +#define NRFX_TWI_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_TWI_CONFIG_LOG_LEVEL +#define NRFX_TWI_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TWI_CONFIG_INFO_COLOR +#define NRFX_TWI_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR +#define NRFX_TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver +//========================================================== +#ifndef NRFX_UARTE_ENABLED +#define NRFX_UARTE_ENABLED 0 +#endif +// NRFX_UARTE0_ENABLED - Enable UARTE0 instance +#ifndef NRFX_UARTE0_ENABLED +#define NRFX_UARTE0_ENABLED 0 +#endif + +// NRFX_UARTE1_ENABLED - Enable UARTE1 instance +#ifndef NRFX_UARTE1_ENABLED +#define NRFX_UARTE1_ENABLED 0 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC +#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY +#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <8388608=> 31250 baud +// <10289152=> 38400 baud +// <15007744=> 56000 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE +#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED +#define NRFX_UARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL +#define NRFX_UARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UARTE_CONFIG_INFO_COLOR +#define NRFX_UARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR +#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver +//========================================================== +#ifndef NRFX_UART_ENABLED +#define NRFX_UART_ENABLED 0 +#endif +// NRFX_UART0_ENABLED - Enable UART0 instance +#ifndef NRFX_UART0_ENABLED +#define NRFX_UART0_ENABLED 0 +#endif + +// NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC +#define NRFX_UART_DEFAULT_CONFIG_HWFC 0 +#endif + +// NRFX_UART_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY +#define NRFX_UART_DEFAULT_CONFIG_PARITY 0 +#endif + +// NRFX_UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3866624=> 14400 baud +// <5152768=> 19200 baud +// <7729152=> 28800 baud +// <8388608=> 31250 baud +// <10309632=> 38400 baud +// <15007744=> 56000 baud +// <15462400=> 57600 baud +// <20615168=> 76800 baud +// <30924800=> 115200 baud +// <61845504=> 230400 baud +// <67108864=> 250000 baud +// <123695104=> 460800 baud +// <247386112=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE +#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800 +#endif + +// NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_UART_CONFIG_LOG_ENABLED +#define NRFX_UART_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_UART_CONFIG_LOG_LEVEL +#define NRFX_UART_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UART_CONFIG_INFO_COLOR +#define NRFX_UART_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UART_CONFIG_DEBUG_COLOR +#define NRFX_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver +//========================================================== +#ifndef NRFX_WDT_ENABLED +#define NRFX_WDT_ENABLED 0 +#endif +// NRFX_WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode + +// <1=> Run in SLEEP, Pause in HALT +// <8=> Pause in SLEEP, Run in HALT +// <9=> Run in SLEEP and HALT +// <0=> Pause in SLEEP and HALT + +#ifndef NRFX_WDT_CONFIG_BEHAVIOUR +#define NRFX_WDT_CONFIG_BEHAVIOUR 1 +#endif + +// NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295> + + +#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE +#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000 +#endif + +// NRFX_WDT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY +#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_WDT_CONFIG_LOG_ENABLED +#define NRFX_WDT_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_WDT_CONFIG_LOG_LEVEL +#define NRFX_WDT_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_WDT_CONFIG_INFO_COLOR +#define NRFX_WDT_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR +#define NRFX_WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// PDM_ENABLED - nrf_drv_pdm - PDM peripheral driver - legacy layer +//========================================================== +#ifndef PDM_ENABLED +#define PDM_ENABLED 0 +#endif +// PDM_CONFIG_MODE - Mode + +// <0=> Stereo +// <1=> Mono + +#ifndef PDM_CONFIG_MODE +#define PDM_CONFIG_MODE 1 +#endif + +// PDM_CONFIG_EDGE - Edge + +// <0=> Left falling +// <1=> Left rising + +#ifndef PDM_CONFIG_EDGE +#define PDM_CONFIG_EDGE 0 +#endif + +// PDM_CONFIG_CLOCK_FREQ - Clock frequency + +// <134217728=> 1000k +// <138412032=> 1032k (default) +// <142606336=> 1067k + +#ifndef PDM_CONFIG_CLOCK_FREQ +#define PDM_CONFIG_CLOCK_FREQ 138412032 +#endif + +// PDM_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + #ifndef PDM_CONFIG_IRQ_PRIORITY #define PDM_CONFIG_IRQ_PRIORITY 7 #endif // -// PERIPHERAL_RESOURCE_SHARING_ENABLED - nrf_drv_common - Peripheral drivers common module - - -#ifndef PERIPHERAL_RESOURCE_SHARING_ENABLED -#define PERIPHERAL_RESOURCE_SHARING_ENABLED 1 -#endif - -// POWER_ENABLED - nrf_drv_power - POWER peripheral driver +// POWER_ENABLED - nrf_drv_power - POWER peripheral driver - legacy layer //========================================================== #ifndef POWER_ENABLED #define POWER_ENABLED 0 #endif // POWER_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef POWER_CONFIG_IRQ_PRIORITY #define POWER_CONFIG_IRQ_PRIORITY 7 #endif // POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator - + // This settings means only that components for DCDC regulator are installed and it can be enabled. @@ -2144,7 +4573,7 @@ #endif // POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator - + // This settings means only that components for DCDC regulator are installed and it can be enabled. @@ -2154,40 +4583,40 @@ // -// PPI_ENABLED - nrf_drv_ppi - PPI peripheral driver - +// PPI_ENABLED - nrf_drv_ppi - PPI peripheral driver - legacy layer + #ifndef PPI_ENABLED #define PPI_ENABLED 1 #endif -// PWM_ENABLED - nrf_drv_pwm - PWM peripheral driver +// PWM_ENABLED - nrf_drv_pwm - PWM peripheral driver - legacy layer //========================================================== #ifndef PWM_ENABLED -#define PWM_ENABLED 1 +#define PWM_ENABLED 0 #endif -// PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31> +// PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31> #ifndef PWM_DEFAULT_CONFIG_OUT0_PIN #define PWM_DEFAULT_CONFIG_OUT0_PIN 31 #endif -// PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31> +// PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31> #ifndef PWM_DEFAULT_CONFIG_OUT1_PIN #define PWM_DEFAULT_CONFIG_OUT1_PIN 31 #endif -// PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31> +// PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31> #ifndef PWM_DEFAULT_CONFIG_OUT2_PIN #define PWM_DEFAULT_CONFIG_OUT2_PIN 31 #endif -// PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31> +// PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31> #ifndef PWM_DEFAULT_CONFIG_OUT3_PIN @@ -2195,94 +4624,94 @@ #endif // PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock - -// <0=> 16 MHz -// <1=> 8 MHz -// <2=> 4 MHz -// <3=> 2 MHz -// <4=> 1 MHz -// <5=> 500 kHz -// <6=> 250 kHz -// <7=> 125 kHz + +// <0=> 16 MHz +// <1=> 8 MHz +// <2=> 4 MHz +// <3=> 2 MHz +// <4=> 1 MHz +// <5=> 500 kHz +// <6=> 250 kHz +// <7=> 125 kHz #ifndef PWM_DEFAULT_CONFIG_BASE_CLOCK #define PWM_DEFAULT_CONFIG_BASE_CLOCK 4 #endif // PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode - -// <0=> Up -// <1=> Up and Down + +// <0=> Up +// <1=> Up and Down #ifndef PWM_DEFAULT_CONFIG_COUNT_MODE #define PWM_DEFAULT_CONFIG_COUNT_MODE 0 #endif -// PWM_DEFAULT_CONFIG_TOP_VALUE - Top value +// PWM_DEFAULT_CONFIG_TOP_VALUE - Top value #ifndef PWM_DEFAULT_CONFIG_TOP_VALUE #define PWM_DEFAULT_CONFIG_TOP_VALUE 1000 #endif // PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode - -// <0=> Common -// <1=> Grouped -// <2=> Individual -// <3=> Waveform + +// <0=> Common +// <1=> Grouped +// <2=> Individual +// <3=> Waveform #ifndef PWM_DEFAULT_CONFIG_LOAD_MODE #define PWM_DEFAULT_CONFIG_LOAD_MODE 0 #endif // PWM_DEFAULT_CONFIG_STEP_MODE - Step mode - -// <0=> Auto -// <1=> Triggered + +// <0=> Auto +// <1=> Triggered #ifndef PWM_DEFAULT_CONFIG_STEP_MODE #define PWM_DEFAULT_CONFIG_STEP_MODE 0 #endif // PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + - -// Priorities 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef PWM_DEFAULT_CONFIG_IRQ_PRIORITY #define PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // PWM0_ENABLED - Enable PWM0 instance - + #ifndef PWM0_ENABLED -#define PWM0_ENABLED 1 +#define PWM0_ENABLED 0 #endif // PWM1_ENABLED - Enable PWM1 instance - + #ifndef PWM1_ENABLED -#define PWM1_ENABLED 1 +#define PWM1_ENABLED 0 #endif // PWM2_ENABLED - Enable PWM2 instance - + #ifndef PWM2_ENABLED -#define PWM2_ENABLED 1 +#define PWM2_ENABLED 0 #endif // PWM3_ENABLED - Enable PWM3 instance - + #ifndef PWM3_ENABLED #define PWM3_ENABLED 0 @@ -2290,102 +4719,102 @@ // -// QDEC_ENABLED - nrf_drv_qdec - QDEC peripheral driver +// QDEC_ENABLED - nrf_drv_qdec - QDEC peripheral driver - legacy layer //========================================================== #ifndef QDEC_ENABLED #define QDEC_ENABLED 0 #endif // QDEC_CONFIG_REPORTPER - Report period - -// <0=> 10 Samples -// <1=> 40 Samples -// <2=> 80 Samples -// <3=> 120 Samples -// <4=> 160 Samples -// <5=> 200 Samples -// <6=> 240 Samples -// <7=> 280 Samples + +// <0=> 10 Samples +// <1=> 40 Samples +// <2=> 80 Samples +// <3=> 120 Samples +// <4=> 160 Samples +// <5=> 200 Samples +// <6=> 240 Samples +// <7=> 280 Samples #ifndef QDEC_CONFIG_REPORTPER #define QDEC_CONFIG_REPORTPER 0 #endif // QDEC_CONFIG_SAMPLEPER - Sample period - -// <0=> 128 us -// <1=> 256 us -// <2=> 512 us -// <3=> 1024 us -// <4=> 2048 us -// <5=> 4096 us -// <6=> 8192 us -// <7=> 16384 us + +// <0=> 128 us +// <1=> 256 us +// <2=> 512 us +// <3=> 1024 us +// <4=> 2048 us +// <5=> 4096 us +// <6=> 8192 us +// <7=> 16384 us #ifndef QDEC_CONFIG_SAMPLEPER #define QDEC_CONFIG_SAMPLEPER 7 #endif -// QDEC_CONFIG_PIO_A - A pin <0-31> +// QDEC_CONFIG_PIO_A - A pin <0-31> #ifndef QDEC_CONFIG_PIO_A #define QDEC_CONFIG_PIO_A 31 #endif -// QDEC_CONFIG_PIO_B - B pin <0-31> +// QDEC_CONFIG_PIO_B - B pin <0-31> #ifndef QDEC_CONFIG_PIO_B #define QDEC_CONFIG_PIO_B 31 #endif -// QDEC_CONFIG_PIO_LED - LED pin <0-31> +// QDEC_CONFIG_PIO_LED - LED pin <0-31> #ifndef QDEC_CONFIG_PIO_LED #define QDEC_CONFIG_PIO_LED 31 #endif -// QDEC_CONFIG_LEDPRE - LED pre +// QDEC_CONFIG_LEDPRE - LED pre #ifndef QDEC_CONFIG_LEDPRE #define QDEC_CONFIG_LEDPRE 511 #endif // QDEC_CONFIG_LEDPOL - LED polarity - -// <0=> Active low -// <1=> Active high + +// <0=> Active low +// <1=> Active high #ifndef QDEC_CONFIG_LEDPOL #define QDEC_CONFIG_LEDPOL 1 #endif // QDEC_CONFIG_DBFEN - Debouncing enable - + #ifndef QDEC_CONFIG_DBFEN #define QDEC_CONFIG_DBFEN 0 #endif // QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable - + #ifndef QDEC_CONFIG_SAMPLE_INTEN #define QDEC_CONFIG_SAMPLE_INTEN 0 #endif // QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef QDEC_CONFIG_IRQ_PRIORITY #define QDEC_CONFIG_IRQ_PRIORITY 7 @@ -2393,35 +4822,165 @@ // -// RNG_ENABLED - nrf_drv_rng - RNG peripheral driver +// QSPI_ENABLED - nrf_drv_qspi - QSPI peripheral driver - legacy layer +//========================================================== +#ifndef QSPI_ENABLED +#define QSPI_ENABLED 0 +#endif +// QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns). <0-255> + + +#ifndef QSPI_CONFIG_SCK_DELAY +#define QSPI_CONFIG_SCK_DELAY 1 +#endif + +// QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation. +#ifndef QSPI_CONFIG_XIP_OFFSET +#define QSPI_CONFIG_XIP_OFFSET 0 +#endif + +// QSPI_CONFIG_READOC - Number of data lines and opcode used for reading. + +// <0=> FastRead +// <1=> Read2O +// <2=> Read2IO +// <3=> Read4O +// <4=> Read4IO + +#ifndef QSPI_CONFIG_READOC +#define QSPI_CONFIG_READOC 0 +#endif + +// QSPI_CONFIG_WRITEOC - Number of data lines and opcode used for writing. + +// <0=> PP +// <1=> PP2O +// <2=> PP4O +// <3=> PP4IO + +#ifndef QSPI_CONFIG_WRITEOC +#define QSPI_CONFIG_WRITEOC 0 +#endif + +// QSPI_CONFIG_ADDRMODE - Addressing mode. + +// <0=> 24bit +// <1=> 32bit + +#ifndef QSPI_CONFIG_ADDRMODE +#define QSPI_CONFIG_ADDRMODE 0 +#endif + +// QSPI_CONFIG_MODE - SPI mode. + +// <0=> Mode 0 +// <1=> Mode 1 + +#ifndef QSPI_CONFIG_MODE +#define QSPI_CONFIG_MODE 0 +#endif + +// QSPI_CONFIG_FREQUENCY - Frequency divider. + +// <0=> 32MHz/1 +// <1=> 32MHz/2 +// <2=> 32MHz/3 +// <3=> 32MHz/4 +// <4=> 32MHz/5 +// <5=> 32MHz/6 +// <6=> 32MHz/7 +// <7=> 32MHz/8 +// <8=> 32MHz/9 +// <9=> 32MHz/10 +// <10=> 32MHz/11 +// <11=> 32MHz/12 +// <12=> 32MHz/13 +// <13=> 32MHz/14 +// <14=> 32MHz/15 +// <15=> 32MHz/16 + +#ifndef QSPI_CONFIG_FREQUENCY +#define QSPI_CONFIG_FREQUENCY 15 +#endif + +// QSPI_PIN_SCK - SCK pin value. +#ifndef QSPI_PIN_SCK +#define QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_CSN - CSN pin value. +#ifndef QSPI_PIN_CSN +#define QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO0 - IO0 pin value. +#ifndef QSPI_PIN_IO0 +#define QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO1 - IO1 pin value. +#ifndef QSPI_PIN_IO1 +#define QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO2 - IO2 pin value. +#ifndef QSPI_PIN_IO2 +#define QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO3 - IO3 pin value. +#ifndef QSPI_PIN_IO3 +#define QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef QSPI_CONFIG_IRQ_PRIORITY +#define QSPI_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// RNG_ENABLED - nrf_drv_rng - RNG peripheral driver - legacy layer //========================================================== #ifndef RNG_ENABLED -#define RNG_ENABLED 1 +#define RNG_ENABLED 0 #endif // RNG_CONFIG_ERROR_CORRECTION - Error correction - + #ifndef RNG_CONFIG_ERROR_CORRECTION #define RNG_CONFIG_ERROR_CORRECTION 1 #endif -// RNG_CONFIG_POOL_SIZE - Pool size +// RNG_CONFIG_POOL_SIZE - Pool size #ifndef RNG_CONFIG_POOL_SIZE #define RNG_CONFIG_POOL_SIZE 64 #endif // RNG_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef RNG_CONFIG_IRQ_PRIORITY #define RNG_CONFIG_IRQ_PRIORITY 7 @@ -2429,12 +4988,12 @@ // -// RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver +// RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver - legacy layer //========================================================== #ifndef RTC_ENABLED #define RTC_ENABLED 0 #endif -// RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768> +// RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768> #ifndef RTC_DEFAULT_CONFIG_FREQUENCY @@ -2442,108 +5001,108 @@ #endif // RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering - + #ifndef RTC_DEFAULT_CONFIG_RELIABLE #define RTC_DEFAULT_CONFIG_RELIABLE 0 #endif // RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY #define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // RTC0_ENABLED - Enable RTC0 instance - + #ifndef RTC0_ENABLED #define RTC0_ENABLED 0 #endif // RTC1_ENABLED - Enable RTC1 instance - + #ifndef RTC1_ENABLED #define RTC1_ENABLED 0 #endif // RTC2_ENABLED - Enable RTC2 instance - + #ifndef RTC2_ENABLED #define RTC2_ENABLED 0 #endif -// NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt +// NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt #ifndef NRF_MAXIMUM_LATENCY_US #define NRF_MAXIMUM_LATENCY_US 2000 #endif // -// SAADC_ENABLED - nrf_drv_saadc - SAADC peripheral driver +// SAADC_ENABLED - nrf_drv_saadc - SAADC peripheral driver - legacy layer //========================================================== #ifndef SAADC_ENABLED -#define SAADC_ENABLED 1 +#define SAADC_ENABLED 0 #endif // SAADC_CONFIG_RESOLUTION - Resolution - -// <0=> 8 bit -// <1=> 10 bit -// <2=> 12 bit -// <3=> 14 bit + +// <0=> 8 bit +// <1=> 10 bit +// <2=> 12 bit +// <3=> 14 bit #ifndef SAADC_CONFIG_RESOLUTION -#define SAADC_CONFIG_RESOLUTION 2 +#define SAADC_CONFIG_RESOLUTION 1 #endif // SAADC_CONFIG_OVERSAMPLE - Sample period - -// <0=> Disabled -// <1=> 2x -// <2=> 4x -// <3=> 8x -// <4=> 16x -// <5=> 32x -// <6=> 64x -// <7=> 128x -// <8=> 256x + +// <0=> Disabled +// <1=> 2x +// <2=> 4x +// <3=> 8x +// <4=> 16x +// <5=> 32x +// <6=> 64x +// <7=> 128x +// <8=> 256x #ifndef SAADC_CONFIG_OVERSAMPLE #define SAADC_CONFIG_OVERSAMPLE 0 #endif // SAADC_CONFIG_LP_MODE - Enabling low power mode - + #ifndef SAADC_CONFIG_LP_MODE #define SAADC_CONFIG_LP_MODE 0 #endif // SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef SAADC_CONFIG_IRQ_PRIORITY #define SAADC_CONFIG_IRQ_PRIORITY 7 @@ -2551,56 +5110,56 @@ // -// SPIS_ENABLED - nrf_drv_spis - SPI Slave driver +// SPIS_ENABLED - nrf_drv_spis - SPIS peripheral driver - legacy layer //========================================================== #ifndef SPIS_ENABLED -#define SPIS_ENABLED 1 +#define SPIS_ENABLED 0 #endif // SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef SPIS_DEFAULT_CONFIG_IRQ_PRIORITY #define SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // SPIS_DEFAULT_MODE - Mode - -// <0=> MODE_0 -// <1=> MODE_1 -// <2=> MODE_2 -// <3=> MODE_3 + +// <0=> MODE_0 +// <1=> MODE_1 +// <2=> MODE_2 +// <3=> MODE_3 #ifndef SPIS_DEFAULT_MODE #define SPIS_DEFAULT_MODE 0 #endif // SPIS_DEFAULT_BIT_ORDER - SPIS default bit order - -// <0=> MSB first -// <1=> LSB first + +// <0=> MSB first +// <1=> LSB first #ifndef SPIS_DEFAULT_BIT_ORDER #define SPIS_DEFAULT_BIT_ORDER 0 #endif -// SPIS_DEFAULT_DEF - SPIS default DEF character <0-255> +// SPIS_DEFAULT_DEF - SPIS default DEF character <0-255> #ifndef SPIS_DEFAULT_DEF #define SPIS_DEFAULT_DEF 255 #endif -// SPIS_DEFAULT_ORC - SPIS default ORC character <0-255> +// SPIS_DEFAULT_ORC - SPIS default ORC character <0-255> #ifndef SPIS_DEFAULT_ORC @@ -2608,21 +5167,21 @@ #endif // SPIS0_ENABLED - Enable SPIS0 instance - + #ifndef SPIS0_ENABLED -#define SPIS0_ENABLED 1 +#define SPIS0_ENABLED 0 #endif // SPIS1_ENABLED - Enable SPIS1 instance - + #ifndef SPIS1_ENABLED #define SPIS1_ENABLED 0 #endif // SPIS2_ENABLED - Enable SPIS2 instance - + #ifndef SPIS2_ENABLED #define SPIS2_ENABLED 0 @@ -2630,62 +5189,53 @@ // -// SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver +// SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver - legacy layer //========================================================== #ifndef SPI_ENABLED -#define SPI_ENABLED 1 +#define SPI_ENABLED 0 #endif // SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef SPI_DEFAULT_CONFIG_IRQ_PRIORITY #define SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // NRF_SPI_DRV_MISO_PULLUP_CFG - MISO PIN pull-up configuration. - -// <0=> NRF_GPIO_PIN_NOPULL -// <1=> NRF_GPIO_PIN_PULLDOWN -// <3=> NRF_GPIO_PIN_PULLUP + +// <0=> NRF_GPIO_PIN_NOPULL +// <1=> NRF_GPIO_PIN_PULLDOWN +// <3=> NRF_GPIO_PIN_PULLUP #ifndef NRF_SPI_DRV_MISO_PULLUP_CFG #define NRF_SPI_DRV_MISO_PULLUP_CFG 1 #endif +// needed these to build! +#define SPI0_ENABLED 1 +#define SPI1_ENABLED 1 +#define SPI2_ENABLED 1 + // SPI0_ENABLED - Enable SPI0 instance //========================================================== #ifndef SPI0_ENABLED -#define SPI0_ENABLED 1 +#define SPI0_ENABLED 0 #endif // SPI0_USE_EASY_DMA - Use EasyDMA - + #ifndef SPI0_USE_EASY_DMA -#define SPI0_USE_EASY_DMA 0 -#endif - -// SPI0_DEFAULT_FREQUENCY - SPI frequency - -// <33554432=> 125 kHz -// <67108864=> 250 kHz -// <134217728=> 500 kHz -// <268435456=> 1 MHz -// <536870912=> 2 MHz -// <1073741824=> 4 MHz -// <2147483648=> 8 MHz - -#ifndef SPI0_DEFAULT_FREQUENCY -#define SPI0_DEFAULT_FREQUENCY 1073741824 +#define SPI0_USE_EASY_DMA 1 #endif // @@ -2693,27 +5243,13 @@ // SPI1_ENABLED - Enable SPI1 instance //========================================================== #ifndef SPI1_ENABLED -#define SPI1_ENABLED 1 +#define SPI1_ENABLED 0 #endif // SPI1_USE_EASY_DMA - Use EasyDMA - + #ifndef SPI1_USE_EASY_DMA -#define SPI1_USE_EASY_DMA 0 -#endif - -// SPI1_DEFAULT_FREQUENCY - SPI frequency - -// <33554432=> 125 kHz -// <67108864=> 250 kHz -// <134217728=> 500 kHz -// <268435456=> 1 MHz -// <536870912=> 2 MHz -// <1073741824=> 4 MHz -// <2147483648=> 8 MHz - -#ifndef SPI1_DEFAULT_FREQUENCY -#define SPI1_DEFAULT_FREQUENCY 1073741824 +#define SPI1_USE_EASY_DMA 1 #endif // @@ -2721,122 +5257,108 @@ // SPI2_ENABLED - Enable SPI2 instance //========================================================== #ifndef SPI2_ENABLED -#define SPI2_ENABLED 1 +#define SPI2_ENABLED 0 #endif // SPI2_USE_EASY_DMA - Use EasyDMA - + #ifndef SPI2_USE_EASY_DMA -#define SPI2_USE_EASY_DMA 0 -#endif - -// SPI2_DEFAULT_FREQUENCY - SPI frequency - -// <33554432=> 125 kHz -// <67108864=> 250 kHz -// <134217728=> 500 kHz -// <268435456=> 1 MHz -// <536870912=> 2 MHz -// <1073741824=> 4 MHz -// <2147483648=> 8 MHz - -#ifndef SPI2_DEFAULT_FREQUENCY -#define SPI2_DEFAULT_FREQUENCY 1073741824 +#define SPI2_USE_EASY_DMA 1 #endif // // -// TIMER_ENABLED - nrf_drv_timer - TIMER periperal driver +// TIMER_ENABLED - nrf_drv_timer - TIMER periperal driver - legacy layer //========================================================== #ifndef TIMER_ENABLED #define TIMER_ENABLED 0 #endif // TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode - -// <0=> 16 MHz -// <1=> 8 MHz -// <2=> 4 MHz -// <3=> 2 MHz -// <4=> 1 MHz -// <5=> 500 kHz -// <6=> 250 kHz -// <7=> 125 kHz -// <8=> 62.5 kHz -// <9=> 31.25 kHz + +// <0=> 16 MHz +// <1=> 8 MHz +// <2=> 4 MHz +// <3=> 2 MHz +// <4=> 1 MHz +// <5=> 500 kHz +// <6=> 250 kHz +// <7=> 125 kHz +// <8=> 62.5 kHz +// <9=> 31.25 kHz #ifndef TIMER_DEFAULT_CONFIG_FREQUENCY #define TIMER_DEFAULT_CONFIG_FREQUENCY 0 #endif // TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation - -// <0=> Timer -// <1=> Counter + +// <0=> Timer +// <1=> Counter #ifndef TIMER_DEFAULT_CONFIG_MODE #define TIMER_DEFAULT_CONFIG_MODE 0 #endif // TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width - -// <0=> 16 bit -// <1=> 8 bit -// <2=> 24 bit -// <3=> 32 bit + +// <0=> 16 bit +// <1=> 8 bit +// <2=> 24 bit +// <3=> 32 bit #ifndef TIMER_DEFAULT_CONFIG_BIT_WIDTH #define TIMER_DEFAULT_CONFIG_BIT_WIDTH 0 #endif // TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef TIMER_DEFAULT_CONFIG_IRQ_PRIORITY #define TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // TIMER0_ENABLED - Enable TIMER0 instance - + #ifndef TIMER0_ENABLED #define TIMER0_ENABLED 0 #endif // TIMER1_ENABLED - Enable TIMER1 instance - + #ifndef TIMER1_ENABLED #define TIMER1_ENABLED 0 #endif // TIMER2_ENABLED - Enable TIMER2 instance - + #ifndef TIMER2_ENABLED #define TIMER2_ENABLED 0 #endif // TIMER3_ENABLED - Enable TIMER3 instance - + #ifndef TIMER3_ENABLED #define TIMER3_ENABLED 0 #endif // TIMER4_ENABLED - Enable TIMER4 instance - + #ifndef TIMER4_ENABLED #define TIMER4_ENABLED 0 @@ -2844,74 +5366,27 @@ // -// TWIS_ENABLED - nrf_drv_twis - TWIS peripheral driver +// TWIS_ENABLED - nrf_drv_twis - TWIS peripheral driver - legacy layer //========================================================== #ifndef TWIS_ENABLED #define TWIS_ENABLED 0 #endif -// TWIS_DEFAULT_CONFIG_ADDR0 - Address0 -#ifndef TWIS_DEFAULT_CONFIG_ADDR0 -#define TWIS_DEFAULT_CONFIG_ADDR0 0 -#endif - -// TWIS_DEFAULT_CONFIG_ADDR1 - Address1 -#ifndef TWIS_DEFAULT_CONFIG_ADDR1 -#define TWIS_DEFAULT_CONFIG_ADDR1 0 -#endif - -// TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration - -// <0=> Disabled -// <1=> Pull down -// <3=> Pull up - -#ifndef TWIS_DEFAULT_CONFIG_SCL_PULL -#define TWIS_DEFAULT_CONFIG_SCL_PULL 0 -#endif - -// TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration - -// <0=> Disabled -// <1=> Pull down -// <3=> Pull up - -#ifndef TWIS_DEFAULT_CONFIG_SDA_PULL -#define TWIS_DEFAULT_CONFIG_SDA_PULL 0 -#endif - -// TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef TWIS_DEFAULT_CONFIG_IRQ_PRIORITY -#define TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 -#endif - // TWIS0_ENABLED - Enable TWIS0 instance - + #ifndef TWIS0_ENABLED #define TWIS0_ENABLED 0 #endif // TWIS1_ENABLED - Enable TWIS1 instance - + #ifndef TWIS1_ENABLED #define TWIS1_ENABLED 0 #endif // TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once - + // Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. @@ -2920,7 +5395,7 @@ #endif // TWIS_NO_SYNC_MODE - Remove support for synchronous mode - + // Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. @@ -2928,49 +5403,96 @@ #define TWIS_NO_SYNC_MODE 0 #endif +// TWIS_DEFAULT_CONFIG_ADDR0 - Address0 +#ifndef TWIS_DEFAULT_CONFIG_ADDR0 +#define TWIS_DEFAULT_CONFIG_ADDR0 0 +#endif + +// TWIS_DEFAULT_CONFIG_ADDR1 - Address1 +#ifndef TWIS_DEFAULT_CONFIG_ADDR1 +#define TWIS_DEFAULT_CONFIG_ADDR1 0 +#endif + +// TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration + +// <0=> Disabled +// <1=> Pull down +// <3=> Pull up + +#ifndef TWIS_DEFAULT_CONFIG_SCL_PULL +#define TWIS_DEFAULT_CONFIG_SCL_PULL 0 +#endif + +// TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration + +// <0=> Disabled +// <1=> Pull down +// <3=> Pull up + +#ifndef TWIS_DEFAULT_CONFIG_SDA_PULL +#define TWIS_DEFAULT_CONFIG_SDA_PULL 0 +#endif + +// TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef TWIS_DEFAULT_CONFIG_IRQ_PRIORITY +#define TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + // -// TWI_ENABLED - nrf_drv_twi - TWI/TWIM peripheral driver +// TWI_ENABLED - nrf_drv_twi - TWI/TWIM peripheral driver - legacy layer //========================================================== #ifndef TWI_ENABLED #define TWI_ENABLED 1 #endif // TWI_DEFAULT_CONFIG_FREQUENCY - Frequency - -// <26738688=> 100k -// <67108864=> 250k -// <104857600=> 400k + +// <26738688=> 100k +// <67108864=> 250k +// <104857600=> 400k #ifndef TWI_DEFAULT_CONFIG_FREQUENCY #define TWI_DEFAULT_CONFIG_FREQUENCY 26738688 #endif // TWI_DEFAULT_CONFIG_CLR_BUS_INIT - Enables bus clearing procedure during init - + #ifndef TWI_DEFAULT_CONFIG_CLR_BUS_INIT #define TWI_DEFAULT_CONFIG_CLR_BUS_INIT 0 #endif // TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit - + #ifndef TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT #define TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0 #endif // TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef TWI_DEFAULT_CONFIG_IRQ_PRIORITY #define TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7 @@ -2982,7 +5504,7 @@ #define TWI0_ENABLED 1 #endif // TWI0_USE_EASY_DMA - Use EasyDMA (if present) - + #ifndef TWI0_USE_EASY_DMA #define TWI0_USE_EASY_DMA 0 @@ -2996,7 +5518,7 @@ #define TWI1_ENABLED 1 #endif // TWI1_USE_EASY_DMA - Use EasyDMA (if present) - + #ifndef TWI1_USE_EASY_DMA #define TWI1_USE_EASY_DMA 0 @@ -3006,90 +5528,92 @@ // -// UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver +// UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer //========================================================== #ifndef UART_ENABLED #define UART_ENABLED 1 #endif // UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control - -// <0=> Disabled -// <1=> Enabled + +// <0=> Disabled +// <1=> Enabled #ifndef UART_DEFAULT_CONFIG_HWFC -#define UART_DEFAULT_CONFIG_HWFC 1 +#define UART_DEFAULT_CONFIG_HWFC 0 #endif // UART_DEFAULT_CONFIG_PARITY - Parity - -// <0=> Excluded -// <14=> Included + +// <0=> Excluded +// <14=> Included #ifndef UART_DEFAULT_CONFIG_PARITY #define UART_DEFAULT_CONFIG_PARITY 0 #endif // UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate - -// <323584=> 1200 baud -// <643072=> 2400 baud -// <1290240=> 4800 baud -// <2576384=> 9600 baud -// <3862528=> 14400 baud -// <5152768=> 19200 baud -// <7716864=> 28800 baud -// <10289152=> 38400 baud -// <15400960=> 57600 baud -// <20615168=> 76800 baud -// <30801920=> 115200 baud -// <61865984=> 230400 baud -// <67108864=> 250000 baud -// <121634816=> 460800 baud -// <251658240=> 921600 baud -// <268435456=> 1000000 baud + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud #ifndef UART_DEFAULT_CONFIG_BAUDRATE -#define UART_DEFAULT_CONFIG_BAUDRATE 2576384 +#define UART_DEFAULT_CONFIG_BAUDRATE 30801920 #endif // UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY #define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA - + #ifndef UART_EASY_DMA_SUPPORT #define UART_EASY_DMA_SUPPORT 1 #endif // UART_LEGACY_SUPPORT - Driver supporting Legacy mode - + #ifndef UART_LEGACY_SUPPORT #define UART_LEGACY_SUPPORT 1 #endif +// needed for Mbed build +#define UART0_ENABLED 1 // UART0_ENABLED - Enable UART0 instance //========================================================== #ifndef UART0_ENABLED -#define UART0_ENABLED 1 +#define UART0_ENABLED 0 #endif // UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA - + #ifndef UART0_CONFIG_USE_EASY_DMA #define UART0_CONFIG_USE_EASY_DMA 1 @@ -3102,13 +5626,6 @@ #ifndef UART1_ENABLED #define UART1_ENABLED 0 #endif -// UART1_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA - - -#ifndef UART1_CONFIG_USE_EASY_DMA -#define UART1_CONFIG_USE_EASY_DMA 1 -#endif - // // @@ -3119,50 +5636,50 @@ #define USBD_ENABLED 0 #endif // USBD_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef USBD_CONFIG_IRQ_PRIORITY #define USBD_CONFIG_IRQ_PRIORITY 7 #endif -// NRF_DRV_USBD_DMASCHEDULER_MODE - USBD SMA scheduler working scheme +// USBD_CONFIG_DMASCHEDULER_MODE - USBD SMA scheduler working scheme + +// <0=> Prioritized access +// <1=> Round Robin -// <0=> Prioritized access -// <1=> Round Robin - -#ifndef NRF_DRV_USBD_DMASCHEDULER_MODE -#define NRF_DRV_USBD_DMASCHEDULER_MODE 0 +#ifndef USBD_CONFIG_DMASCHEDULER_MODE +#define USBD_CONFIG_DMASCHEDULER_MODE 0 #endif // -// WDT_ENABLED - nrf_drv_wdt - WDT peripheral driver +// WDT_ENABLED - nrf_drv_wdt - WDT peripheral driver - legacy layer //========================================================== #ifndef WDT_ENABLED #define WDT_ENABLED 0 #endif // WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode - -// <1=> Run in SLEEP, Pause in HALT -// <8=> Pause in SLEEP, Run in HALT -// <9=> Run in SLEEP and HALT -// <0=> Pause in SLEEP and HALT + +// <1=> Run in SLEEP, Pause in HALT +// <8=> Pause in SLEEP, Run in HALT +// <9=> Run in SLEEP and HALT +// <0=> Pause in SLEEP and HALT #ifndef WDT_CONFIG_BEHAVIOUR #define WDT_CONFIG_BEHAVIOUR 1 #endif -// WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295> +// WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295> #ifndef WDT_CONFIG_RELOAD_VALUE @@ -3170,17 +5687,17 @@ #endif // WDT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef WDT_CONFIG_IRQ_PRIORITY #define WDT_CONFIG_IRQ_PRIORITY 7 @@ -3188,21 +5705,34 @@ // -// +// //========================================================== -// nRF_Libraries +// nRF_Drivers_External + +//========================================================== +// NRF_TWI_SENSOR_ENABLED - nrf_twi_sensor - nRF TWI Sensor module + + +#ifndef NRF_TWI_SENSOR_ENABLED +#define NRF_TWI_SENSOR_ENABLED 0 +#endif + +// +//========================================================== + +// nRF_Libraries //========================================================== // APP_GPIOTE_ENABLED - app_gpiote - GPIOTE events dispatcher - + #ifndef APP_GPIOTE_ENABLED #define APP_GPIOTE_ENABLED 0 #endif // APP_PWM_ENABLED - app_pwm - PWM functionality - + #ifndef APP_PWM_ENABLED #define APP_PWM_ENABLED 0 @@ -3214,14 +5744,14 @@ #define APP_SCHEDULER_ENABLED 0 #endif // APP_SCHEDULER_WITH_PAUSE - Enabling pause feature - + #ifndef APP_SCHEDULER_WITH_PAUSE #define APP_SCHEDULER_WITH_PAUSE 0 #endif // APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling - + #ifndef APP_SCHEDULER_WITH_PROFILER #define APP_SCHEDULER_WITH_PROFILER 0 @@ -3229,42 +5759,87 @@ // +// APP_SDCARD_ENABLED - app_sdcard - SD/MMC card support using SPI +//========================================================== +#ifndef APP_SDCARD_ENABLED +#define APP_SDCARD_ENABLED 0 +#endif +// APP_SDCARD_SPI_INSTANCE - SPI instance used + +// <0=> 0 +// <1=> 1 +// <2=> 2 + +#ifndef APP_SDCARD_SPI_INSTANCE +#define APP_SDCARD_SPI_INSTANCE 0 +#endif + +// APP_SDCARD_FREQ_INIT - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef APP_SDCARD_FREQ_INIT +#define APP_SDCARD_FREQ_INIT 67108864 +#endif + +// APP_SDCARD_FREQ_DATA - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef APP_SDCARD_FREQ_DATA +#define APP_SDCARD_FREQ_DATA 1073741824 +#endif + +// + // APP_TIMER_ENABLED - app_timer - Application timer functionality //========================================================== #ifndef APP_TIMER_ENABLED #define APP_TIMER_ENABLED 0 #endif // APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. - -// <0=> 32768 Hz -// <1=> 16384 Hz -// <3=> 8192 Hz -// <7=> 4096 Hz -// <15=> 2048 Hz -// <31=> 1024 Hz + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz #ifndef APP_TIMER_CONFIG_RTC_FREQUENCY #define APP_TIMER_CONFIG_RTC_FREQUENCY 0 #endif // APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef APP_TIMER_CONFIG_IRQ_PRIORITY #define APP_TIMER_CONFIG_IRQ_PRIORITY 7 #endif -// APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. // Size of the queue depends on how many timers are used // in the system, how often timers are started and overall // system latency. If queue size is too small app_timer calls @@ -3275,21 +5850,14 @@ #endif // APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler - + #ifndef APP_TIMER_CONFIG_USE_SCHEDULER #define APP_TIMER_CONFIG_USE_SCHEDULER 0 #endif -// APP_TIMER_WITH_PROFILER - Enable app_timer profiling - - -#ifndef APP_TIMER_WITH_PROFILER -#define APP_TIMER_WITH_PROFILER 0 -#endif - // APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on - + // If option is enabled RTC is kept running even if there is no active timers. // This option can be used when app_timer is used for timestamping. @@ -3298,111 +5866,259 @@ #define APP_TIMER_KEEPS_RTC_ACTIVE 0 #endif -// APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. +// App Timer Legacy configuration - Legacy configuration. -// <0=> 0 -// <1=> 1 +//========================================================== +// APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + #ifndef APP_TIMER_CONFIG_SWI_NUMBER #define APP_TIMER_CONFIG_SWI_NUMBER 0 #endif -// - -// NRF_TWI_MNGR_ENABLED - nrf_twi_mngr - TWI transaction manager - - -#ifndef NRF_TWI_MNGR_ENABLED -#define NRF_TWI_MNGR_ENABLED 0 -#endif - -// APP_UART_ENABLED - app_uart - UART driver +// //========================================================== -#ifndef APP_UART_ENABLED -#define APP_UART_ENABLED 0 + +// + +// APP_USBD_AUDIO_ENABLED - app_usbd_audio - USB AUDIO class + + +#ifndef APP_USBD_AUDIO_ENABLED +#define APP_USBD_AUDIO_ENABLED 0 #endif -// APP_UART_DRIVER_INSTANCE - UART instance used -// <0=> 0 +// APP_USBD_CDC_ACM_ENABLED - app_usbd_cdc_acm - USB CDC ACM class + -#ifndef APP_UART_DRIVER_INSTANCE -#define APP_UART_DRIVER_INSTANCE 0 +#ifndef APP_USBD_CDC_ACM_ENABLED +#define APP_USBD_CDC_ACM_ENABLED 0 +#endif + +// APP_USBD_ENABLED - app_usbd - USB Device library +//========================================================== +#ifndef APP_USBD_ENABLED +#define APP_USBD_ENABLED 0 +#endif +// APP_USBD_VID - Vendor ID <0x0000-0xFFFF> + + +// Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/ + +#ifndef APP_USBD_VID +#define APP_USBD_VID 0 +#endif + +// APP_USBD_PID - Product ID <0x0000-0xFFFF> + + +// Selected Product ID + +#ifndef APP_USBD_PID +#define APP_USBD_PID 0 +#endif + +// APP_USBD_DEVICE_VER_MAJOR - Device version, major part <0-99> + + +// Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MAJOR +#define APP_USBD_DEVICE_VER_MAJOR 1 +#endif + +// APP_USBD_DEVICE_VER_MINOR - Device version, minor part <0-99> + + +// Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MINOR +#define APP_USBD_DEVICE_VER_MINOR 0 +#endif + +// APP_USBD_CONFIG_SELF_POWERED - Self powered + + +#ifndef APP_USBD_CONFIG_SELF_POWERED +#define APP_USBD_CONFIG_SELF_POWERED 1 +#endif + +// APP_USBD_CONFIG_MAX_POWER - MaxPower field in configuration descriptor in milliamps <0-500> + + +#ifndef APP_USBD_CONFIG_MAX_POWER +#define APP_USBD_CONFIG_MAX_POWER 500 +#endif + +// APP_USBD_CONFIG_POWER_EVENTS_PROCESS - Process power events + + +// Enable processing power events in USB event handler. + +#ifndef APP_USBD_CONFIG_POWER_EVENTS_PROCESS +#define APP_USBD_CONFIG_POWER_EVENTS_PROCESS 1 +#endif + +// APP_USBD_CONFIG_EVENT_QUEUE_ENABLE - Enable event queue + +// This is the default configuration when all the events are placed into internal queue. +// Disable it when external queue is used like app_scheduler or if you wish to process all events inside interrupts. +// Processing all events from the interrupt level adds requirement not to call any functions that modifies the USBD library state from the context higher than USB interrupt context. +// Functions that modify USBD state are functions for sleep, wakeup, start, stop, enable and disable. +//========================================================== +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_ENABLE +#define APP_USBD_CONFIG_EVENT_QUEUE_ENABLE 1 +#endif +// APP_USBD_CONFIG_EVENT_QUEUE_SIZE - The size of event queue <16-64> + + +// The size of the queue for the events that would be processed in the main loop. + +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_SIZE +#define APP_USBD_CONFIG_EVENT_QUEUE_SIZE 32 +#endif + +// APP_USBD_CONFIG_SOF_HANDLING_MODE - Change SOF events handling mode. + + +// Normal queue - SOF events are pushed normally into event queue. +// Compress queue - SOF events are counted and binded with other events or executed when queue is empty. +// This prevents queue from filling with SOF events. +// Interrupt - SOF events are processed in interrupt. +// <0=> Normal queue +// <1=> Compress queue +// <2=> Interrupt + +#ifndef APP_USBD_CONFIG_SOF_HANDLING_MODE +#define APP_USBD_CONFIG_SOF_HANDLING_MODE 1 #endif // -// APP_USBD_CLASS_AUDIO_ENABLED - app_usbd_audio - USB AUDIO class +// APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE - Provide a function that generates timestamps for logs based on the current SOF + +// The function app_usbd_sof_timestamp_get will be implemented if the logger is enabled. +// Use it when initializing the logger. +// SOF processing will be always enabled when this configuration parameter is active. +// Notice that this option is configured outside of APP_USBD_CONFIG_LOG_ENABLED. +// This means that it will work even if the logging in this very module is disabled. -#ifndef APP_USBD_CLASS_AUDIO_ENABLED -#define APP_USBD_CLASS_AUDIO_ENABLED 0 +#ifndef APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE +#define APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE 0 #endif -// APP_USBD_CLASS_CDC_ACM_ENABLED - app_usbd_cdc_acm - USB CDC ACM class +// APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef APP_USBD_CONFIG_LOG_ENABLED +#define APP_USBD_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug - -#ifndef APP_USBD_CLASS_CDC_ACM_ENABLED -#define APP_USBD_CLASS_CDC_ACM_ENABLED 0 +#ifndef APP_USBD_CONFIG_LOG_LEVEL +#define APP_USBD_CONFIG_LOG_LEVEL 3 #endif -// APP_USBD_CLASS_HID_ENABLED - app_usbd_hid - USB HID class +// APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White +#ifndef APP_USBD_CONFIG_INFO_COLOR +#define APP_USBD_CONFIG_INFO_COLOR 0 +#endif -#ifndef APP_USBD_CLASS_HID_ENABLED -#define APP_USBD_CLASS_HID_ENABLED 0 +// APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_DEBUG_COLOR +#define APP_USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// APP_USBD_HID_ENABLED - app_usbd_hid - USB HID class + + +#ifndef APP_USBD_HID_ENABLED +#define APP_USBD_HID_ENABLED 0 #endif // APP_USBD_HID_GENERIC_ENABLED - app_usbd_hid_generic - USB HID generic - + #ifndef APP_USBD_HID_GENERIC_ENABLED #define APP_USBD_HID_GENERIC_ENABLED 0 #endif // APP_USBD_HID_KBD_ENABLED - app_usbd_hid_kbd - USB HID keyboard - + #ifndef APP_USBD_HID_KBD_ENABLED #define APP_USBD_HID_KBD_ENABLED 0 #endif // APP_USBD_HID_MOUSE_ENABLED - app_usbd_hid_mouse - USB HID mouse - + #ifndef APP_USBD_HID_MOUSE_ENABLED #define APP_USBD_HID_MOUSE_ENABLED 0 #endif // APP_USBD_MSC_ENABLED - app_usbd_msc - USB MSC class - + #ifndef APP_USBD_MSC_ENABLED #define APP_USBD_MSC_ENABLED 0 #endif -// BUTTON_ENABLED - app_button - buttons handling module - - -#ifndef BUTTON_ENABLED -#define BUTTON_ENABLED 0 -#endif - // CRC16_ENABLED - crc16 - CRC16 calculation routines - + #ifndef CRC16_ENABLED #define CRC16_ENABLED 0 #endif // CRC32_ENABLED - crc32 - CRC32 calculation routines - + #ifndef CRC32_ENABLED #define CRC32_ENABLED 0 #endif // ECC_ENABLED - ecc - Elliptic Curve Cryptography Library - + #ifndef ECC_ENABLED #define ECC_ENABLED 0 @@ -3411,13 +6127,13 @@ // FDS_ENABLED - fds - Flash data storage module //========================================================== #ifndef FDS_ENABLED -#define FDS_ENABLED 1 +#define FDS_ENABLED 0 #endif // Pages - Virtual page settings // Configure the number of virtual pages to use and their size. //========================================================== -// FDS_VIRTUAL_PAGES - Number of virtual flash pages to use. +// FDS_VIRTUAL_PAGES - Number of virtual flash pages to use. // One of the virtual pages is reserved by the system for garbage collection. // Therefore, the minimum is two virtual pages: one page to store data and one page to be used by the system for garbage collection. // The total amount of flash memory that is used by FDS amounts to @ref FDS_VIRTUAL_PAGES * @ref FDS_VIRTUAL_PAGE_SIZE * 4 bytes. @@ -3427,19 +6143,19 @@ #endif // FDS_VIRTUAL_PAGE_SIZE - The size of a virtual flash page. - + // Expressed in number of 4-byte words. // By default, a virtual page is the same size as a physical page. // The size of a virtual page must be a multiple of the size of a physical page. -// <1024=> 1024 -// <2048=> 2048 +// <1024=> 1024 +// <2048=> 2048 #ifndef FDS_VIRTUAL_PAGE_SIZE #define FDS_VIRTUAL_PAGE_SIZE 1024 #endif -// +// //========================================================== // Backend - Backend configuration @@ -3447,31 +6163,31 @@ // Configure which nrf_fstorage backend is used by FDS to write to flash. //========================================================== // FDS_BACKEND - FDS flash backend. - + // NRF_FSTORAGE_SD uses the nrf_fstorage_sd backend implementation using the SoftDevice API. Use this if you have a SoftDevice present. // NRF_FSTORAGE_NVMC uses the nrf_fstorage_nvmc implementation. Use this setting if you don't use the SoftDevice. -// <1=> NRF_FSTORAGE_NVMC -// <2=> NRF_FSTORAGE_SD +// <1=> NRF_FSTORAGE_NVMC +// <2=> NRF_FSTORAGE_SD #ifndef FDS_BACKEND -#define FDS_BACKEND 1 +#define FDS_BACKEND 2 #endif -// +// //========================================================== // Queue - Queue settings //========================================================== -// FDS_OP_QUEUE_SIZE - Size of the internal queue. +// FDS_OP_QUEUE_SIZE - Size of the internal queue. // Increase this value if you frequently get synchronous FDS_ERR_NO_SPACE_IN_QUEUES errors. #ifndef FDS_OP_QUEUE_SIZE #define FDS_OP_QUEUE_SIZE 4 #endif -// +// //========================================================== // CRC - CRC functionality @@ -3487,12 +6203,12 @@ #define FDS_CRC_CHECK_ON_READ 0 #endif // FDS_CRC_CHECK_ON_WRITE - Perform a CRC check on newly written records. - + // Perform a CRC check on newly written records. // This setting can be used to make sure that the record data was not altered while being written to flash. -// <1=> Enabled -// <0=> Disabled +// <1=> Enabled +// <0=> Disabled #ifndef FDS_CRC_CHECK_ON_WRITE #define FDS_CRC_CHECK_ON_WRITE 0 @@ -3500,18 +6216,18 @@ // -// +// //========================================================== // Users - Number of users //========================================================== -// FDS_MAX_USERS - Maximum number of callbacks that can be registered. +// FDS_MAX_USERS - Maximum number of callbacks that can be registered. #ifndef FDS_MAX_USERS #define FDS_MAX_USERS 4 #endif -// +// //========================================================== // @@ -3522,7 +6238,7 @@ #define HARDFAULT_HANDLER_ENABLED 0 #endif // HARDFAULT_HANDLER_GDB_PSP_BACKTRACE - Bypass the GDB problem with multiple stack pointers backtrace - + // There is a known bug in GDB which causes it to incorrectly backtrace the code // when multiple stack pointers are used (main and process stack pointers). @@ -3543,17 +6259,17 @@ #ifndef HCI_MEM_POOL_ENABLED #define HCI_MEM_POOL_ENABLED 0 #endif -// HCI_TX_BUF_SIZE - TX buffer size in bytes. +// HCI_TX_BUF_SIZE - TX buffer size in bytes. #ifndef HCI_TX_BUF_SIZE #define HCI_TX_BUF_SIZE 600 #endif -// HCI_RX_BUF_SIZE - RX buffer size in bytes. +// HCI_RX_BUF_SIZE - RX buffer size in bytes. #ifndef HCI_RX_BUF_SIZE #define HCI_RX_BUF_SIZE 600 #endif -// HCI_RX_BUF_QUEUE_SIZE - RX buffer queue size. +// HCI_RX_BUF_QUEUE_SIZE - RX buffer queue size. #ifndef HCI_RX_BUF_QUEUE_SIZE #define HCI_RX_BUF_QUEUE_SIZE 4 #endif @@ -3566,55 +6282,55 @@ #define HCI_SLIP_ENABLED 0 #endif // HCI_UART_BAUDRATE - Default Baudrate - -// <323584=> 1200 baud -// <643072=> 2400 baud -// <1290240=> 4800 baud -// <2576384=> 9600 baud -// <3862528=> 14400 baud -// <5152768=> 19200 baud -// <7716864=> 28800 baud -// <10289152=> 38400 baud -// <15400960=> 57600 baud -// <20615168=> 76800 baud -// <30801920=> 115200 baud -// <61865984=> 230400 baud -// <67108864=> 250000 baud -// <121634816=> 460800 baud -// <251658240=> 921600 baud -// <268435456=> 1000000 baud + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud #ifndef HCI_UART_BAUDRATE #define HCI_UART_BAUDRATE 30801920 #endif // HCI_UART_FLOW_CONTROL - Hardware Flow Control - -// <0=> Disabled -// <1=> Enabled + +// <0=> Disabled +// <1=> Enabled #ifndef HCI_UART_FLOW_CONTROL #define HCI_UART_FLOW_CONTROL 0 #endif -// HCI_UART_RX_PIN - UART RX pin +// HCI_UART_RX_PIN - UART RX pin #ifndef HCI_UART_RX_PIN -#define HCI_UART_RX_PIN 8 +#define HCI_UART_RX_PIN 31 #endif -// HCI_UART_TX_PIN - UART TX pin +// HCI_UART_TX_PIN - UART TX pin #ifndef HCI_UART_TX_PIN -#define HCI_UART_TX_PIN 6 +#define HCI_UART_TX_PIN 31 #endif -// HCI_UART_RTS_PIN - UART RTS pin +// HCI_UART_RTS_PIN - UART RTS pin #ifndef HCI_UART_RTS_PIN -#define HCI_UART_RTS_PIN 5 +#define HCI_UART_RTS_PIN 31 #endif -// HCI_UART_CTS_PIN - UART CTS pin +// HCI_UART_CTS_PIN - UART CTS pin #ifndef HCI_UART_CTS_PIN -#define HCI_UART_CTS_PIN 7 +#define HCI_UART_CTS_PIN 31 #endif // @@ -3624,7 +6340,7 @@ #ifndef HCI_TRANSPORT_ENABLED #define HCI_TRANSPORT_ENABLED 0 #endif -// HCI_MAX_PACKET_SIZE_IN_BITS - Maximum size of a single application packet in bits. +// HCI_MAX_PACKET_SIZE_IN_BITS - Maximum size of a single application packet in bits. #ifndef HCI_MAX_PACKET_SIZE_IN_BITS #define HCI_MAX_PACKET_SIZE_IN_BITS 8000 #endif @@ -3632,14 +6348,14 @@ // // LED_SOFTBLINK_ENABLED - led_softblink - led_softblink module - + #ifndef LED_SOFTBLINK_ENABLED #define LED_SOFTBLINK_ENABLED 0 #endif // LOW_POWER_PWM_ENABLED - low_power_pwm - low_power_pwm module - + #ifndef LOW_POWER_PWM_ENABLED #define LOW_POWER_PWM_ENABLED 0 @@ -3650,113 +6366,163 @@ #ifndef MEM_MANAGER_ENABLED #define MEM_MANAGER_ENABLED 0 #endif -// MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255> +// MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255> #ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT #define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1 #endif -// MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block. +// MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block. // Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE #define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32 #endif -// MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255> +// MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255> #ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT #define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0 #endif -// MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block. +// MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block. // Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE #define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256 #endif -// MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255> +// MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255> #ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT #define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0 #endif -// MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block. +// MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block. // Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE #define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256 #endif -// MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255> +// MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255> #ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT #define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0 #endif -// MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block. +// MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block. // Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE #define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320 #endif -// MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255> +// MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255> #ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT #define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0 #endif -// MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block. +// MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block. // Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE #define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444 #endif -// MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255> +// MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255> #ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT #define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0 #endif -// MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block. +// MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block. // Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE #define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64 #endif -// MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255> +// MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255> #ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT #define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0 #endif -// MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block. +// MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block. // Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized. #ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE #define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32 #endif -// MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module. +// MEM_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef MEM_MANAGER_CONFIG_LOG_ENABLED +#define MEM_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// MEM_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug +#ifndef MEM_MANAGER_CONFIG_LOG_LEVEL +#define MEM_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// MEM_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef MEM_MANAGER_CONFIG_INFO_COLOR +#define MEM_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// MEM_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef MEM_MANAGER_CONFIG_DEBUG_COLOR +#define MEM_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module. + #ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK #define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0 #endif // - // NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module //========================================================== #ifndef NRF_BALLOC_ENABLED @@ -3767,14 +6533,14 @@ #ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED #define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 #endif -// NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> +// NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> #ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS #define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 #endif -// NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> +// NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> #ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS @@ -3782,26 +6548,33 @@ #endif // NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. - + #ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED #define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 #endif // NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. - + #ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED #define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 #endif // NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. - + #ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED #define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 #endif +// NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + // // @@ -3811,32 +6584,32 @@ #ifndef NRF_CSENSE_ENABLED #define NRF_CSENSE_ENABLED 0 #endif -// NRF_CSENSE_PAD_HYSTERESIS - Minimum value of change required to determine that a pad was touched. +// NRF_CSENSE_PAD_HYSTERESIS - Minimum value of change required to determine that a pad was touched. #ifndef NRF_CSENSE_PAD_HYSTERESIS #define NRF_CSENSE_PAD_HYSTERESIS 15 #endif -// NRF_CSENSE_PAD_DEVIATION - Minimum value measured on a pad required to take it into account while calculating the step. +// NRF_CSENSE_PAD_DEVIATION - Minimum value measured on a pad required to take it into account while calculating the step. #ifndef NRF_CSENSE_PAD_DEVIATION #define NRF_CSENSE_PAD_DEVIATION 70 #endif -// NRF_CSENSE_MIN_PAD_VALUE - Minimum normalized value on a pad required to take its value into account. +// NRF_CSENSE_MIN_PAD_VALUE - Minimum normalized value on a pad required to take its value into account. #ifndef NRF_CSENSE_MIN_PAD_VALUE #define NRF_CSENSE_MIN_PAD_VALUE 20 #endif -// NRF_CSENSE_MAX_PADS_NUMBER - Maximum number of pads used for one instance. +// NRF_CSENSE_MAX_PADS_NUMBER - Maximum number of pads used for one instance. #ifndef NRF_CSENSE_MAX_PADS_NUMBER #define NRF_CSENSE_MAX_PADS_NUMBER 20 #endif -// NRF_CSENSE_MAX_VALUE - Maximum normalized value obtained from measurement. +// NRF_CSENSE_MAX_VALUE - Maximum normalized value obtained from measurement. #ifndef NRF_CSENSE_MAX_VALUE #define NRF_CSENSE_MAX_VALUE 1000 #endif -// NRF_CSENSE_OUTPUT_PIN - Output pin used by the low-level module. +// NRF_CSENSE_OUTPUT_PIN - Output pin used by the low-level module. // This is used when capacitive sensor does not use COMP. #ifndef NRF_CSENSE_OUTPUT_PIN @@ -3857,17 +6630,17 @@ #ifndef USE_COMP #define USE_COMP 0 #endif -// TIMER0_FOR_CSENSE - First TIMER instance used by the driver (not used on nRF51). +// TIMER0_FOR_CSENSE - First TIMER instance used by the driver (not used on nRF51). #ifndef TIMER0_FOR_CSENSE #define TIMER0_FOR_CSENSE 1 #endif -// TIMER1_FOR_CSENSE - Second TIMER instance used by the driver (not used on nRF51). +// TIMER1_FOR_CSENSE - Second TIMER instance used by the driver (not used on nRF51). #ifndef TIMER1_FOR_CSENSE #define TIMER1_FOR_CSENSE 2 #endif -// MEASUREMENT_PERIOD - Single measurement period. +// MEASUREMENT_PERIOD - Single measurement period. // Time of a single measurement can be calculated as // T = (1/2)*MEASUREMENT_PERIOD*(1/f_OSC) where f_OSC = I_SOURCE / (2C*(VUP-VDOWN) ). // I_SOURCE, VUP, and VDOWN are values used to initialize COMP and C is the capacitance of the used pad. @@ -3881,29 +6654,47 @@ // // NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. - + #ifndef NRF_FPRINTF_ENABLED -#define NRF_FPRINTF_ENABLED 0 +#define NRF_FPRINTF_ENABLED 1 #endif // NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library //========================================================== #ifndef NRF_FSTORAGE_ENABLED -#define NRF_FSTORAGE_ENABLED 1 +#define NRF_FSTORAGE_ENABLED 0 #endif -// nrf_fstorage_sd - Implementation using the SoftDevice. +// nrf_fstorage - Common settings -// Configuration options for the fstorage implementation using the SoftDevice. +// Common settings to all fstorage implementations //========================================================== -// NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations. +// NRF_FSTORAGE_PARAM_CHECK_DISABLED - Disable user input validation + + +// If selected, use ASSERT to validate user input. +// This effectively removes user input validation in production code. +// Recommended setting: OFF, only enable this setting if size is a major concern. + +#ifndef NRF_FSTORAGE_PARAM_CHECK_DISABLED +#define NRF_FSTORAGE_PARAM_CHECK_DISABLED 0 +#endif + +// +//========================================================== + +// nrf_fstorage_sd - Implementation using the SoftDevice + +// Configuration options for the fstorage implementation using the SoftDevice +//========================================================== +// NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations // Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM. #ifndef NRF_FSTORAGE_SD_QUEUE_SIZE #define NRF_FSTORAGE_SD_QUEUE_SIZE 4 #endif -// NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy. +// NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy // Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error. // The SoftDevice might fail to schedule flash access due to high BLE activity. @@ -3911,7 +6702,7 @@ #define NRF_FSTORAGE_SD_MAX_RETRIES 8 #endif -// NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation. +// NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation // This value must be a multiple of four. // Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity. // This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write. @@ -3921,16 +6712,23 @@ #define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 4096 #endif -// +// //========================================================== // -// NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module +// NRF_GFX_ENABLED - nrf_gfx - GFX module + +#ifndef NRF_GFX_ENABLED +#define NRF_GFX_ENABLED 0 +#endif + +// NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + #ifndef NRF_MEMOBJ_ENABLED -#define NRF_MEMOBJ_ENABLED 0 +#define NRF_MEMOBJ_ENABLED 1 #endif // NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module @@ -3946,56 +6744,56 @@ #define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0 #endif // NRF_PWR_MGMT_SLEEP_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN #define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31 @@ -4004,7 +6802,7 @@ // // NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED - Enables CPU usage monitor. - + // Module will trace percentage of CPU usage in one second intervals. @@ -4017,7 +6815,7 @@ #ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED #define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0 #endif -// NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). +// NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). // Shutdown procedure will begin no earlier than after this number of seconds. #ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S @@ -4027,27 +6825,27 @@ // // NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED - Enables FPU event cleaning. - + #ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED -#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1 +#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 0 #endif // NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY - Blocked shutdown procedure will be retried every second. - + #ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY #define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0 #endif // NRF_PWR_MGMT_CONFIG_USE_SCHEDULER - Module will use @ref app_scheduler. - + #ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER #define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0 #endif -// NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. +// NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. // The number of stages of the shutdown process. #ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT @@ -4056,29 +6854,57 @@ // -// NRF_QUEUE_ENABLED - nrf_queue - Queue module - - +// NRF_QUEUE_ENABLED - nrf_queue - Queue module +//========================================================== #ifndef NRF_QUEUE_ENABLED -#define NRF_QUEUE_ENABLED 1 +#define NRF_QUEUE_ENABLED 0 +#endif +// NRF_QUEUE_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_QUEUE_CLI_CMDS +#define NRF_QUEUE_CLI_CMDS 0 #endif -// NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator +// +// NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator + #ifndef NRF_SECTION_ITER_ENABLED #define NRF_SECTION_ITER_ENABLED 1 #endif -// NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. +// NRF_SORTLIST_ENABLED - nrf_sortlist - Sorted list + +#ifndef NRF_SORTLIST_ENABLED +#define NRF_SORTLIST_ENABLED 0 +#endif + +// NRF_SPI_MNGR_ENABLED - nrf_spi_mngr - SPI transaction manager + + +#ifndef NRF_SPI_MNGR_ENABLED +#define NRF_SPI_MNGR_ENABLED 0 +#endif + +// NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + #ifndef NRF_STRERROR_ENABLED -#define NRF_STRERROR_ENABLED 0 +#define NRF_STRERROR_ENABLED 1 +#endif + +// NRF_TWI_MNGR_ENABLED - nrf_twi_mngr - TWI transaction manager + + +#ifndef NRF_TWI_MNGR_ENABLED +#define NRF_TWI_MNGR_ENABLED 0 #endif // SLIP_ENABLED - slip - SLIP encoding and decoding - + #ifndef SLIP_ENABLED #define SLIP_ENABLED 0 @@ -4090,37 +6916,37 @@ #define TASK_MANAGER_ENABLED 0 #endif // TASK_MANAGER_CLI_CMDS - Enable CLI commands specific to the module - + #ifndef TASK_MANAGER_CLI_CMDS -#define TASK_MANAGER_CLI_CMDS 1 +#define TASK_MANAGER_CLI_CMDS 0 #endif -// TASK_MANAGER_CONFIG_MAX_TASKS - Maximum number of tasks which can be created +// TASK_MANAGER_CONFIG_MAX_TASKS - Maximum number of tasks which can be created #ifndef TASK_MANAGER_CONFIG_MAX_TASKS #define TASK_MANAGER_CONFIG_MAX_TASKS 2 #endif -// TASK_MANAGER_CONFIG_STACK_SIZE - Stack size for every task (power of 2) +// TASK_MANAGER_CONFIG_STACK_SIZE - Stack size for every task (power of 2) #ifndef TASK_MANAGER_CONFIG_STACK_SIZE #define TASK_MANAGER_CONFIG_STACK_SIZE 1024 #endif // TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED - Enable stack profiling. - + #ifndef TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED #define TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED 1 #endif // TASK_MANAGER_CONFIG_STACK_GUARD - Configures stack guard. - -// <0=> Disabled -// <4=> 32 bytes -// <5=> 64 bytes -// <6=> 128 bytes -// <7=> 256 bytes -// <8=> 512 bytes + +// <0=> Disabled +// <4=> 32 bytes +// <5=> 64 bytes +// <6=> 128 bytes +// <7=> 256 bytes +// <8=> 512 bytes #ifndef TASK_MANAGER_CONFIG_STACK_GUARD #define TASK_MANAGER_CONFIG_STACK_GUARD 7 @@ -4128,34 +6954,68 @@ // -// nrf_cli - Command line interface. +// app_button - buttons handling module //========================================================== -// NRF_CLI_ENABLED - Enable/disable CLI module. +// BUTTON_ENABLED - Enables Button module + +#ifndef BUTTON_ENABLED +#define BUTTON_ENABLED 0 +#endif + +// BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons + + +#ifndef BUTTON_HIGH_ACCURACY_ENABLED +#define BUTTON_HIGH_ACCURACY_ENABLED 0 +#endif + +// +//========================================================== + +// nrf_cli - Command line interface + +//========================================================== +// NRF_CLI_ENABLED - Enable/disable the CLI module. + #ifndef NRF_CLI_ENABLED #define NRF_CLI_ENABLED 0 #endif -// NRF_CLI_ARGC_MAX - Maximum number of parameters passed to command handler. +// NRF_CLI_ARGC_MAX - Maximum number of parameters passed to the command handler. #ifndef NRF_CLI_ARGC_MAX #define NRF_CLI_ARGC_MAX 12 #endif -// NRF_CLI_BUILD_IN_CMDS_ENABLED - CLI build in commands. - +// NRF_CLI_BUILD_IN_CMDS_ENABLED - CLI built-in commands. + #ifndef NRF_CLI_BUILD_IN_CMDS_ENABLED #define NRF_CLI_BUILD_IN_CMDS_ENABLED 1 #endif -// NRF_CLI_CMD_BUFF_SIZE - Maximum buffer size for single command. +// NRF_CLI_CMD_BUFF_SIZE - Maximum buffer size for a single command. #ifndef NRF_CLI_CMD_BUFF_SIZE #define NRF_CLI_CMD_BUFF_SIZE 128 #endif -// NRF_CLI_PRINTF_BUFF_SIZE - Maximum print buffer size. +// NRF_CLI_ECHO_STATUS - CLI echo status. If set, echo is ON. + + +#ifndef NRF_CLI_ECHO_STATUS +#define NRF_CLI_ECHO_STATUS 1 +#endif + +// NRF_CLI_WILDCARD_ENABLED - Enable wildcard functionality for CLI commands. + + +#ifndef NRF_CLI_WILDCARD_ENABLED +#define NRF_CLI_WILDCARD_ENABLED 0 +#endif + +// NRF_CLI_PRINTF_BUFF_SIZE - Maximum print buffer size. #ifndef NRF_CLI_PRINTF_BUFF_SIZE #define NRF_CLI_PRINTF_BUFF_SIZE 23 #endif @@ -4165,12 +7025,12 @@ #ifndef NRF_CLI_HISTORY_ENABLED #define NRF_CLI_HISTORY_ENABLED 1 #endif -// NRF_CLI_HISTORY_ELEMENT_SIZE - Size of one memory object reserved for CLI history +// NRF_CLI_HISTORY_ELEMENT_SIZE - Size of one memory object reserved for CLI history. #ifndef NRF_CLI_HISTORY_ELEMENT_SIZE #define NRF_CLI_HISTORY_ELEMENT_SIZE 32 #endif -// NRF_CLI_HISTORY_ELEMENT_COUNT - Number of history memory objects +// NRF_CLI_HISTORY_ELEMENT_COUNT - Number of history memory objects. #ifndef NRF_CLI_HISTORY_ELEMENT_COUNT #define NRF_CLI_HISTORY_ELEMENT_COUNT 8 #endif @@ -4178,121 +7038,54 @@ // // NRF_CLI_VT100_COLORS_ENABLED - CLI VT100 colors. - + #ifndef NRF_CLI_VT100_COLORS_ENABLED #define NRF_CLI_VT100_COLORS_ENABLED 1 #endif -// NRF_CLI_LOG_BACKEND - Enable logger backend interface. +// NRF_CLI_STATISTICS_ENABLED - Enable CLI statistics. + +#ifndef NRF_CLI_STATISTICS_ENABLED +#define NRF_CLI_STATISTICS_ENABLED 1 +#endif + +// NRF_CLI_LOG_BACKEND - Enable logger backend interface. + #ifndef NRF_CLI_LOG_BACKEND #define NRF_CLI_LOG_BACKEND 1 #endif // NRF_CLI_USES_TASK_MANAGER_ENABLED - Enable CLI to use task_manager - + #ifndef NRF_CLI_USES_TASK_MANAGER_ENABLED #define NRF_CLI_USES_TASK_MANAGER_ENABLED 0 #endif -// +// //========================================================== -// nrf_cli_rtt - RTT command line interface transport. - -//========================================================== -// NRF_CLI_RTT_ENABLED - Enable/disable CLI RTT module. - - -#ifndef NRF_CLI_RTT_ENABLED -#define NRF_CLI_RTT_ENABLED 0 -#endif - -// NRF_CLI_RTT_TERMINAL_ID - RTT terminal ID for CLI. -#ifndef NRF_CLI_RTT_TERMINAL_ID -#define NRF_CLI_RTT_TERMINAL_ID 0 -#endif - -// +// //========================================================== -// -//========================================================== - -// nRF_Log +// nRF_Log //========================================================== -// NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend -//========================================================== -#ifndef NRF_LOG_BACKEND_RTT_ENABLED -#define NRF_LOG_BACKEND_RTT_ENABLED 0 -#endif -// NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. -// Size of the buffer is a trade-off between RAM usage and processing. -// if buffer is smaller then strings will often be fragmented. -// It is recommended to use size which will fit typical log and only the -// longer one will be fragmented. +// NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + -#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE -#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 #endif -// - -// NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend -//========================================================== -#ifndef NRF_LOG_BACKEND_UART_ENABLED -#define NRF_LOG_BACKEND_UART_ENABLED 0 -#endif -// NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin -#ifndef NRF_LOG_BACKEND_UART_TX_PIN -#define NRF_LOG_BACKEND_UART_TX_PIN 6 -#endif - -// NRF_LOG_BACKEND_UART_BAUDRATE - Default Baudrate - -// <323584=> 1200 baud -// <643072=> 2400 baud -// <1290240=> 4800 baud -// <2576384=> 9600 baud -// <3862528=> 14400 baud -// <5152768=> 19200 baud -// <7716864=> 28800 baud -// <10289152=> 38400 baud -// <15400960=> 57600 baud -// <20615168=> 76800 baud -// <30801920=> 115200 baud -// <61865984=> 230400 baud -// <67108864=> 250000 baud -// <121634816=> 460800 baud -// <251658240=> 921600 baud -// <268435456=> 1000000 baud - -#ifndef NRF_LOG_BACKEND_UART_BAUDRATE -#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920 -#endif - -// NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. -// Size of the buffer is a trade-off between RAM usage and processing. -// if buffer is smaller then strings will often be fragmented. -// It is recommended to use size which will fit typical log and only the -// longer one will be fragmented. - -#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE -#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64 -#endif - -// - -// nrf_log - Logging +// nrf_log - Logger //========================================================== // NRF_LOG_ENABLED - Logging module for nRF5 SDK //========================================================== - #ifndef NRF_LOG_ENABLED #define NRF_LOG_ENABLED 0 #endif @@ -4302,69 +7095,69 @@ #define NRF_LOG_USES_COLORS 0 #endif // NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_LOG_COLOR_DEFAULT #define NRF_LOG_COLOR_DEFAULT 0 #endif // NRF_LOG_ERROR_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_LOG_ERROR_COLOR -#define NRF_LOG_ERROR_COLOR 0 +#define NRF_LOG_ERROR_COLOR 2 #endif // NRF_LOG_WARNING_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_LOG_WARNING_COLOR -#define NRF_LOG_WARNING_COLOR 0 +#define NRF_LOG_WARNING_COLOR 4 #endif // // NRF_LOG_DEFAULT_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_LOG_DEFAULT_LEVEL #define NRF_LOG_DEFAULT_LEVEL 3 #endif // NRF_LOG_DEFERRED - Enable deffered logger. - + // Log data is buffered and can be processed in idle. @@ -4373,60 +7166,65 @@ #endif // NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). - + // Must be power of 2 and multiple of 4. // If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. -// <128=> 128 -// <256=> 256 -// <512=> 512 -// <1024=> 1024 -// <2048=> 2048 -// <4096=> 4096 -// <8192=> 8192 -// <16384=> 16384 +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 #ifndef NRF_LOG_BUFSIZE #define NRF_LOG_BUFSIZE 1024 #endif // NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + - -// If set then oldest logs are overwritten. Otherwise a +// If set then oldest logs are overwritten. Otherwise a // marker is injected informing about overflow. #ifndef NRF_LOG_ALLOW_OVERFLOW #define NRF_LOG_ALLOW_OVERFLOW 1 #endif -// NRF_LOG_USES_TIMESTAMP - Enable timestamping - +// NRF_LOG_USES_TIMESTAMP - Enable timestamping // Function for getting the timestamp is provided by the user - +//========================================================== #ifndef NRF_LOG_USES_TIMESTAMP #define NRF_LOG_USES_TIMESTAMP 0 #endif +// NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// // NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. - + #ifndef NRF_LOG_FILTERS_ENABLED -#define NRF_LOG_FILTERS_ENABLED 1 +#define NRF_LOG_FILTERS_ENABLED 0 #endif // NRF_LOG_CLI_CMDS - Enable CLI commands for the module. - + #ifndef NRF_LOG_CLI_CMDS -#define NRF_LOG_CLI_CMDS 1 +#define NRF_LOG_CLI_CMDS 0 #endif // Log message pool - Configuration of log message pool //========================================================== -// NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. // If a small value is set, then performance of logs processing // is degraded because data is fragmented. Bigger value impacts // RAM memory utilization. The size is set to fit a message with @@ -4436,7 +7234,7 @@ #define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 #endif -// NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects // If a small value is set, then it may lead to a deadlock // in certain cases if backend has high latency and holds // multiple messages for long time. Bigger value impacts @@ -4446,15 +7244,15 @@ #define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 #endif -// +// //========================================================== // -// nrf_log module configuration +// nrf_log module configuration //========================================================== -// nrf_log in nRF_Core +// nrf_log in nRF_Core //========================================================== // NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. @@ -4463,44 +7261,44 @@ #define NRF_MPU_CONFIG_LOG_ENABLED 0 #endif // NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_MPU_CONFIG_LOG_LEVEL #define NRF_MPU_CONFIG_LOG_LEVEL 3 #endif // NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_MPU_CONFIG_INFO_COLOR #define NRF_MPU_CONFIG_INFO_COLOR 0 #endif // NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_MPU_CONFIG_DEBUG_COLOR #define NRF_MPU_CONFIG_DEBUG_COLOR 0 @@ -4514,44 +7312,44 @@ #define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 #endif // NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL #define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 #endif // NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR #define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 #endif // NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR #define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 @@ -4565,44 +7363,44 @@ #define TASK_MANAGER_CONFIG_LOG_ENABLED 0 #endif // TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef TASK_MANAGER_CONFIG_LOG_LEVEL #define TASK_MANAGER_CONFIG_LOG_LEVEL 3 #endif // TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TASK_MANAGER_CONFIG_INFO_COLOR #define TASK_MANAGER_CONFIG_INFO_COLOR 0 #endif // TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR #define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 @@ -4610,10 +7408,10 @@ // -// +// //========================================================== -// nrf_log in nRF_Drivers +// nrf_log in nRF_Drivers //========================================================== // CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. @@ -4622,44 +7420,44 @@ #define CLOCK_CONFIG_LOG_ENABLED 0 #endif // CLOCK_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef CLOCK_CONFIG_LOG_LEVEL #define CLOCK_CONFIG_LOG_LEVEL 3 #endif // CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef CLOCK_CONFIG_INFO_COLOR #define CLOCK_CONFIG_INFO_COLOR 0 #endif // CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef CLOCK_CONFIG_DEBUG_COLOR #define CLOCK_CONFIG_DEBUG_COLOR 0 @@ -4667,101 +7465,50 @@ // -// COMMON_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef COMMON_CONFIG_LOG_ENABLED -#define COMMON_CONFIG_LOG_ENABLED 0 -#endif -// COMMON_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef COMMON_CONFIG_LOG_LEVEL -#define COMMON_CONFIG_LOG_LEVEL 3 -#endif - -// COMMON_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMMON_CONFIG_INFO_COLOR -#define COMMON_CONFIG_INFO_COLOR 0 -#endif - -// COMMON_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMMON_CONFIG_DEBUG_COLOR -#define COMMON_CONFIG_DEBUG_COLOR 0 -#endif - -// - // COMP_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef COMP_CONFIG_LOG_ENABLED #define COMP_CONFIG_LOG_ENABLED 0 #endif // COMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef COMP_CONFIG_LOG_LEVEL #define COMP_CONFIG_LOG_LEVEL 3 #endif // COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef COMP_CONFIG_INFO_COLOR #define COMP_CONFIG_INFO_COLOR 0 #endif // COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef COMP_CONFIG_DEBUG_COLOR #define COMP_CONFIG_DEBUG_COLOR 0 @@ -4775,44 +7522,44 @@ #define GPIOTE_CONFIG_LOG_ENABLED 0 #endif // GPIOTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef GPIOTE_CONFIG_LOG_LEVEL #define GPIOTE_CONFIG_LOG_LEVEL 3 #endif // GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef GPIOTE_CONFIG_INFO_COLOR #define GPIOTE_CONFIG_INFO_COLOR 0 #endif // GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef GPIOTE_CONFIG_DEBUG_COLOR #define GPIOTE_CONFIG_DEBUG_COLOR 0 @@ -4820,101 +7567,50 @@ // -// I2S_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef I2S_CONFIG_LOG_ENABLED -#define I2S_CONFIG_LOG_ENABLED 0 -#endif -// I2S_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef I2S_CONFIG_LOG_LEVEL -#define I2S_CONFIG_LOG_LEVEL 3 -#endif - -// I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef I2S_CONFIG_INFO_COLOR -#define I2S_CONFIG_INFO_COLOR 0 -#endif - -// I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef I2S_CONFIG_DEBUG_COLOR -#define I2S_CONFIG_DEBUG_COLOR 0 -#endif - -// - // LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef LPCOMP_CONFIG_LOG_ENABLED #define LPCOMP_CONFIG_LOG_ENABLED 0 #endif // LPCOMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef LPCOMP_CONFIG_LOG_LEVEL #define LPCOMP_CONFIG_LOG_LEVEL 3 #endif // LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef LPCOMP_CONFIG_INFO_COLOR #define LPCOMP_CONFIG_INFO_COLOR 0 #endif // LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef LPCOMP_CONFIG_DEBUG_COLOR #define LPCOMP_CONFIG_DEBUG_COLOR 0 @@ -4928,44 +7624,44 @@ #define PDM_CONFIG_LOG_ENABLED 0 #endif // PDM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef PDM_CONFIG_LOG_LEVEL #define PDM_CONFIG_LOG_LEVEL 3 #endif // PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef PDM_CONFIG_INFO_COLOR #define PDM_CONFIG_INFO_COLOR 0 #endif // PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef PDM_CONFIG_DEBUG_COLOR #define PDM_CONFIG_DEBUG_COLOR 0 @@ -4979,44 +7675,44 @@ #define PPI_CONFIG_LOG_ENABLED 0 #endif // PPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef PPI_CONFIG_LOG_LEVEL #define PPI_CONFIG_LOG_LEVEL 3 #endif // PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef PPI_CONFIG_INFO_COLOR #define PPI_CONFIG_INFO_COLOR 0 #endif // PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef PPI_CONFIG_DEBUG_COLOR #define PPI_CONFIG_DEBUG_COLOR 0 @@ -5030,44 +7726,44 @@ #define PWM_CONFIG_LOG_ENABLED 0 #endif // PWM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef PWM_CONFIG_LOG_LEVEL #define PWM_CONFIG_LOG_LEVEL 3 #endif // PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef PWM_CONFIG_INFO_COLOR #define PWM_CONFIG_INFO_COLOR 0 #endif // PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef PWM_CONFIG_DEBUG_COLOR #define PWM_CONFIG_DEBUG_COLOR 0 @@ -5081,44 +7777,44 @@ #define QDEC_CONFIG_LOG_ENABLED 0 #endif // QDEC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef QDEC_CONFIG_LOG_LEVEL #define QDEC_CONFIG_LOG_LEVEL 3 #endif // QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef QDEC_CONFIG_INFO_COLOR #define QDEC_CONFIG_INFO_COLOR 0 #endif // QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef QDEC_CONFIG_DEBUG_COLOR #define QDEC_CONFIG_DEBUG_COLOR 0 @@ -5132,51 +7828,51 @@ #define RNG_CONFIG_LOG_ENABLED 0 #endif // RNG_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef RNG_CONFIG_LOG_LEVEL #define RNG_CONFIG_LOG_LEVEL 3 #endif // RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef RNG_CONFIG_INFO_COLOR #define RNG_CONFIG_INFO_COLOR 0 #endif // RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef RNG_CONFIG_DEBUG_COLOR #define RNG_CONFIG_DEBUG_COLOR 0 #endif // RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. - + #ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED #define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 @@ -5190,44 +7886,44 @@ #define RTC_CONFIG_LOG_ENABLED 0 #endif // RTC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef RTC_CONFIG_LOG_LEVEL #define RTC_CONFIG_LOG_LEVEL 3 #endif // RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef RTC_CONFIG_INFO_COLOR #define RTC_CONFIG_INFO_COLOR 0 #endif // RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef RTC_CONFIG_DEBUG_COLOR #define RTC_CONFIG_DEBUG_COLOR 0 @@ -5241,44 +7937,44 @@ #define SAADC_CONFIG_LOG_ENABLED 0 #endif // SAADC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef SAADC_CONFIG_LOG_LEVEL #define SAADC_CONFIG_LOG_LEVEL 3 #endif // SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef SAADC_CONFIG_INFO_COLOR #define SAADC_CONFIG_INFO_COLOR 0 #endif // SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef SAADC_CONFIG_DEBUG_COLOR #define SAADC_CONFIG_DEBUG_COLOR 0 @@ -5292,44 +7988,44 @@ #define SPIS_CONFIG_LOG_ENABLED 0 #endif // SPIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef SPIS_CONFIG_LOG_LEVEL #define SPIS_CONFIG_LOG_LEVEL 3 #endif // SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef SPIS_CONFIG_INFO_COLOR #define SPIS_CONFIG_INFO_COLOR 0 #endif // SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef SPIS_CONFIG_DEBUG_COLOR #define SPIS_CONFIG_DEBUG_COLOR 0 @@ -5343,44 +8039,44 @@ #define SPI_CONFIG_LOG_ENABLED 0 #endif // SPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef SPI_CONFIG_LOG_LEVEL #define SPI_CONFIG_LOG_LEVEL 3 #endif // SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef SPI_CONFIG_INFO_COLOR #define SPI_CONFIG_INFO_COLOR 0 #endif // SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef SPI_CONFIG_DEBUG_COLOR #define SPI_CONFIG_DEBUG_COLOR 0 @@ -5388,101 +8084,50 @@ // -// SWI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SWI_CONFIG_LOG_ENABLED -#define SWI_CONFIG_LOG_ENABLED 0 -#endif -// SWI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SWI_CONFIG_LOG_LEVEL -#define SWI_CONFIG_LOG_LEVEL 3 -#endif - -// SWI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SWI_CONFIG_INFO_COLOR -#define SWI_CONFIG_INFO_COLOR 0 -#endif - -// SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SWI_CONFIG_DEBUG_COLOR -#define SWI_CONFIG_DEBUG_COLOR 0 -#endif - -// - // TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TIMER_CONFIG_LOG_ENABLED #define TIMER_CONFIG_LOG_ENABLED 0 #endif // TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef TIMER_CONFIG_LOG_LEVEL #define TIMER_CONFIG_LOG_LEVEL 3 #endif // TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TIMER_CONFIG_INFO_COLOR #define TIMER_CONFIG_INFO_COLOR 0 #endif // TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TIMER_CONFIG_DEBUG_COLOR #define TIMER_CONFIG_DEBUG_COLOR 0 @@ -5496,44 +8141,44 @@ #define TWIS_CONFIG_LOG_ENABLED 0 #endif // TWIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef TWIS_CONFIG_LOG_LEVEL #define TWIS_CONFIG_LOG_LEVEL 3 #endif // TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TWIS_CONFIG_INFO_COLOR #define TWIS_CONFIG_INFO_COLOR 0 #endif // TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TWIS_CONFIG_DEBUG_COLOR #define TWIS_CONFIG_DEBUG_COLOR 0 @@ -5547,44 +8192,44 @@ #define TWI_CONFIG_LOG_ENABLED 0 #endif // TWI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef TWI_CONFIG_LOG_LEVEL #define TWI_CONFIG_LOG_LEVEL 3 #endif // TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TWI_CONFIG_INFO_COLOR #define TWI_CONFIG_INFO_COLOR 0 #endif // TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef TWI_CONFIG_DEBUG_COLOR #define TWI_CONFIG_DEBUG_COLOR 0 @@ -5598,44 +8243,44 @@ #define UART_CONFIG_LOG_ENABLED 0 #endif // UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef UART_CONFIG_LOG_LEVEL #define UART_CONFIG_LOG_LEVEL 3 #endif // UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef UART_CONFIG_INFO_COLOR #define UART_CONFIG_INFO_COLOR 0 #endif // UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef UART_CONFIG_DEBUG_COLOR #define UART_CONFIG_DEBUG_COLOR 0 @@ -5649,44 +8294,44 @@ #define USBD_CONFIG_LOG_ENABLED 0 #endif // USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef USBD_CONFIG_LOG_LEVEL #define USBD_CONFIG_LOG_LEVEL 3 #endif // USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef USBD_CONFIG_INFO_COLOR #define USBD_CONFIG_INFO_COLOR 0 #endif // USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef USBD_CONFIG_DEBUG_COLOR #define USBD_CONFIG_DEBUG_COLOR 0 @@ -5700,44 +8345,44 @@ #define WDT_CONFIG_LOG_ENABLED 0 #endif // WDT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef WDT_CONFIG_LOG_LEVEL #define WDT_CONFIG_LOG_LEVEL 3 #endif // WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef WDT_CONFIG_INFO_COLOR #define WDT_CONFIG_INFO_COLOR 0 #endif // WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef WDT_CONFIG_DEBUG_COLOR #define WDT_CONFIG_DEBUG_COLOR 0 @@ -5745,56 +8390,123 @@ // -// +// //========================================================== -// nrf_log in nRF_Libraries +// nrf_log in nRF_Libraries //========================================================== +// APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// If module generates a lot of logs, initial log level can +// be decreased to prevent flooding. Severity level can be +// increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// + // APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED #define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL #define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR #define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 #endif // APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR #define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 @@ -5802,50 +8514,101 @@ // +// APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// + // APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED #define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL #define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef APP_USBD_MSC_CONFIG_INFO_COLOR #define APP_USBD_MSC_CONFIG_INFO_COLOR 0 #endif // APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR #define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 @@ -5853,12 +8616,119 @@ // -// MEM_MANAGER_ENABLE_LOGS - Enable debug trace in the module. - - -#ifndef MEM_MANAGER_ENABLE_LOGS -#define MEM_MANAGER_ENABLE_LOGS 0 +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 #endif +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// // NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== @@ -5866,44 +8736,60 @@ #define NRF_BALLOC_CONFIG_LOG_ENABLED 0 #endif // NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_BALLOC_CONFIG_LOG_LEVEL #define NRF_BALLOC_CONFIG_LOG_LEVEL 3 #endif -// NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. +// NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White +// If module generates a lot of logs, initial log level can +// be decreased to prevent flooding. Severity level can be +// increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_BALLOC_CONFIG_INFO_COLOR #define NRF_BALLOC_CONFIG_INFO_COLOR 0 #endif // NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR #define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 @@ -5917,44 +8803,44 @@ #define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL #define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR #define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR #define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 @@ -5962,50 +8848,101 @@ // +// NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + // NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED #define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL #define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_CLI_UART_CONFIG_INFO_COLOR #define NRF_CLI_UART_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR #define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 @@ -6013,50 +8950,101 @@ // +// NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + // NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED #define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 #endif // NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL #define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 #endif // NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR #define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 #endif // NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR #define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 @@ -6070,44 +9058,44 @@ #define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 #endif // NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL #define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 #endif // NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR #define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 #endif // NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR #define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 @@ -6115,50 +9103,113 @@ // +// NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// + // NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. //========================================================== #ifndef NRF_SDH_ANT_LOG_ENABLED -#define NRF_SDH_ANT_LOG_ENABLED 1 +#define NRF_SDH_ANT_LOG_ENABLED 0 #endif // NRF_SDH_ANT_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_SDH_ANT_LOG_LEVEL #define NRF_SDH_ANT_LOG_LEVEL 3 #endif // NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_ANT_INFO_COLOR #define NRF_SDH_ANT_INFO_COLOR 0 #endif // NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_ANT_DEBUG_COLOR #define NRF_SDH_ANT_DEBUG_COLOR 0 @@ -6172,44 +9223,44 @@ #define NRF_SDH_BLE_LOG_ENABLED 1 #endif // NRF_SDH_BLE_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_SDH_BLE_LOG_LEVEL #define NRF_SDH_BLE_LOG_LEVEL 3 #endif // NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_BLE_INFO_COLOR #define NRF_SDH_BLE_INFO_COLOR 0 #endif // NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_BLE_DEBUG_COLOR #define NRF_SDH_BLE_DEBUG_COLOR 0 @@ -6223,44 +9274,44 @@ #define NRF_SDH_LOG_ENABLED 1 #endif // NRF_SDH_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_SDH_LOG_LEVEL #define NRF_SDH_LOG_LEVEL 3 #endif // NRF_SDH_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_INFO_COLOR #define NRF_SDH_INFO_COLOR 0 #endif // NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_DEBUG_COLOR #define NRF_SDH_DEBUG_COLOR 0 @@ -6274,44 +9325,44 @@ #define NRF_SDH_SOC_LOG_ENABLED 1 #endif // NRF_SDH_SOC_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NRF_SDH_SOC_LOG_LEVEL #define NRF_SDH_SOC_LOG_LEVEL 3 #endif // NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_SOC_INFO_COLOR #define NRF_SDH_SOC_INFO_COLOR 0 #endif // NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NRF_SDH_SOC_DEBUG_COLOR #define NRF_SDH_SOC_DEBUG_COLOR 0 @@ -6319,30 +9370,203 @@ // -// +// NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// //========================================================== -// -//========================================================== - -// -//========================================================== - -// -//========================================================== - -// nRF_NFC +// nrf_log in nRF_Serialization //========================================================== -// NFC_BLE_OOB_ADVDATA_ENABLED - nfc_ble_oob_advdata - Encoding the advertising data and/or scan response data which is specific for OOB pairing +// SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// nRF_NFC + +//========================================================== +// NFC_AC_REC_ENABLED - nfc_ac_rec - NFC NDEF Alternative Carrier record encoder + + +#ifndef NFC_AC_REC_ENABLED +#define NFC_AC_REC_ENABLED 0 +#endif + +// NFC_AC_REC_PARSER_ENABLED - nfc_ac_rec_parser - Alternative Carrier record parser + + +#ifndef NFC_AC_REC_PARSER_ENABLED +#define NFC_AC_REC_PARSER_ENABLED 0 +#endif + +// NFC_BLE_OOB_ADVDATA_ENABLED - nfc_ble_oob_advdata - AD data for OOB pairing encoder //========================================================== #ifndef NFC_BLE_OOB_ADVDATA_ENABLED #define NFC_BLE_OOB_ADVDATA_ENABLED 0 #endif // ADVANCED_ADVDATA_SUPPORT - Non-mandatory AD types for BLE OOB pairing are encoded inside the NDEF message (e.g. service UUIDs) - -// <1=> Enabled -// <0=> Disabled + +// <1=> Enabled +// <0=> Disabled #ifndef ADVANCED_ADVDATA_SUPPORT #define ADVANCED_ADVDATA_SUPPORT 0 @@ -6350,6 +9574,13 @@ // +// NFC_BLE_OOB_ADVDATA_PARSER_ENABLED - nfc_ble_oob_advdata_parser - BLE OOB pairing AD data parser + + +#ifndef NFC_BLE_OOB_ADVDATA_PARSER_ENABLED +#define NFC_BLE_OOB_ADVDATA_PARSER_ENABLED 0 +#endif + // NFC_BLE_PAIR_LIB_ENABLED - nfc_ble_pair_lib - Library parameters //========================================================== #ifndef NFC_BLE_PAIR_LIB_ENABLED @@ -6361,44 +9592,44 @@ #define NFC_BLE_PAIR_LIB_LOG_ENABLED 0 #endif // NFC_BLE_PAIR_LIB_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NFC_BLE_PAIR_LIB_LOG_LEVEL #define NFC_BLE_PAIR_LIB_LOG_LEVEL 3 #endif // NFC_BLE_PAIR_LIB_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NFC_BLE_PAIR_LIB_INFO_COLOR #define NFC_BLE_PAIR_LIB_INFO_COLOR 0 #endif // NFC_BLE_PAIR_LIB_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NFC_BLE_PAIR_LIB_DEBUG_COLOR #define NFC_BLE_PAIR_LIB_DEBUG_COLOR 0 @@ -6417,84 +9648,28 @@ #define BLE_NFC_SEC_PARAM_BOND 1 #endif // BLE_NFC_SEC_PARAM_KDIST_OWN_ENC - Enables Long Term Key and Master Identification distribution by device. - + #ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ENC #define BLE_NFC_SEC_PARAM_KDIST_OWN_ENC 1 #endif // BLE_NFC_SEC_PARAM_KDIST_OWN_ID - Enables Identity Resolving Key and Identity Address Information distribution by device. - + #ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ID #define BLE_NFC_SEC_PARAM_KDIST_OWN_ID 1 #endif // BLE_NFC_SEC_PARAM_KDIST_PEER_ENC - Enables Long Term Key and Master Identification distribution by peer. - + #ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ENC #define BLE_NFC_SEC_PARAM_KDIST_PEER_ENC 1 #endif // BLE_NFC_SEC_PARAM_KDIST_PEER_ID - Enables Identity Resolving Key and Identity Address Information distribution by peer. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ID -#define BLE_NFC_SEC_PARAM_KDIST_PEER_ID 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_OWN_ENC - Enables Long Term Key and Master Identification distribution by device. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ENC -#define BLE_NFC_SEC_PARAM_KDIST_OWN_ENC 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_OWN_ID - Enables Identity Resolving Key and Identity Address Information distribution by device. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ID -#define BLE_NFC_SEC_PARAM_KDIST_OWN_ID 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_PEER_ENC - Enables Long Term Key and Master Identification distribution by peer. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ENC -#define BLE_NFC_SEC_PARAM_KDIST_PEER_ENC 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_PEER_ID - Enables Identity Resolving Key and Identity Address Information distribution by peer. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ID -#define BLE_NFC_SEC_PARAM_KDIST_PEER_ID 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_OWN_ENC - Enables Long Term Key and Master Identification distribution by device. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ENC -#define BLE_NFC_SEC_PARAM_KDIST_OWN_ENC 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_OWN_ID - Enables Identity Resolving Key and Identity Address Information distribution by device. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ID -#define BLE_NFC_SEC_PARAM_KDIST_OWN_ID 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_PEER_ENC - Enables Long Term Key and Master Identification distribution by peer. - - -#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ENC -#define BLE_NFC_SEC_PARAM_KDIST_PEER_ENC 1 -#endif - -// BLE_NFC_SEC_PARAM_KDIST_PEER_ID - Enables Identity Resolving Key and Identity Address Information distribution by peer. - + #ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ID #define BLE_NFC_SEC_PARAM_KDIST_PEER_ID 1 @@ -6503,53 +9678,109 @@ // // BLE_NFC_SEC_PARAM_MIN_KEY_SIZE - Minimal size of a security key. - -// <7=> 7 -// <8=> 8 -// <9=> 9 -// <10=> 10 -// <11=> 11 -// <12=> 12 -// <13=> 13 -// <14=> 14 -// <15=> 15 -// <16=> 16 + +// <7=> 7 +// <8=> 8 +// <9=> 9 +// <10=> 10 +// <11=> 11 +// <12=> 12 +// <13=> 13 +// <14=> 14 +// <15=> 15 +// <16=> 16 #ifndef BLE_NFC_SEC_PARAM_MIN_KEY_SIZE #define BLE_NFC_SEC_PARAM_MIN_KEY_SIZE 7 #endif // BLE_NFC_SEC_PARAM_MAX_KEY_SIZE - Maximal size of a security key. - -// <7=> 7 -// <8=> 8 -// <9=> 9 -// <10=> 10 -// <11=> 11 -// <12=> 12 -// <13=> 13 -// <14=> 14 -// <15=> 15 -// <16=> 16 + +// <7=> 7 +// <8=> 8 +// <9=> 9 +// <10=> 10 +// <11=> 11 +// <12=> 12 +// <13=> 13 +// <14=> 14 +// <15=> 15 +// <16=> 16 #ifndef BLE_NFC_SEC_PARAM_MAX_KEY_SIZE #define BLE_NFC_SEC_PARAM_MAX_KEY_SIZE 16 #endif -// +// //========================================================== // +// NFC_BLE_PAIR_MSG_ENABLED - nfc_ble_pair_msg - NDEF message for OOB pairing encoder + + +#ifndef NFC_BLE_PAIR_MSG_ENABLED +#define NFC_BLE_PAIR_MSG_ENABLED 0 +#endif + +// NFC_CH_COMMON_ENABLED - nfc_ble_pair_common - OOB pairing common data + + +#ifndef NFC_CH_COMMON_ENABLED +#define NFC_CH_COMMON_ENABLED 0 +#endif + +// NFC_EP_OOB_REC_ENABLED - nfc_ep_oob_rec - EP record for BLE pairing encoder + + +#ifndef NFC_EP_OOB_REC_ENABLED +#define NFC_EP_OOB_REC_ENABLED 0 +#endif + +// NFC_HS_REC_ENABLED - nfc_hs_rec - Handover Select NDEF record encoder + + +#ifndef NFC_HS_REC_ENABLED +#define NFC_HS_REC_ENABLED 0 +#endif + +// NFC_LE_OOB_REC_ENABLED - nfc_le_oob_rec - LE record for BLE pairing encoder + + +#ifndef NFC_LE_OOB_REC_ENABLED +#define NFC_LE_OOB_REC_ENABLED 0 +#endif + +// NFC_LE_OOB_REC_PARSER_ENABLED - nfc_le_oob_rec_parser - LE record parser + + +#ifndef NFC_LE_OOB_REC_PARSER_ENABLED +#define NFC_LE_OOB_REC_PARSER_ENABLED 0 +#endif + +// NFC_NDEF_LAUNCHAPP_MSG_ENABLED - nfc_launchapp_msg - Encoding data for NDEF Application Launching message for NFC Tag + + +#ifndef NFC_NDEF_LAUNCHAPP_MSG_ENABLED +#define NFC_NDEF_LAUNCHAPP_MSG_ENABLED 0 +#endif + +// NFC_NDEF_LAUNCHAPP_REC_ENABLED - nfc_launchapp_rec - Encoding data for NDEF Application Launching record for NFC Tag + + +#ifndef NFC_NDEF_LAUNCHAPP_REC_ENABLED +#define NFC_NDEF_LAUNCHAPP_REC_ENABLED 0 +#endif + // NFC_NDEF_MSG_ENABLED - nfc_ndef_msg - NFC NDEF Message generator module //========================================================== #ifndef NFC_NDEF_MSG_ENABLED #define NFC_NDEF_MSG_ENABLED 0 #endif // NFC_NDEF_MSG_TAG_TYPE - NFC Tag Type - -// <2=> Type 2 Tag -// <4=> Type 4 Tag + +// <2=> Type 2 Tag +// <4=> Type 4 Tag #ifndef NFC_NDEF_MSG_TAG_TYPE #define NFC_NDEF_MSG_TAG_TYPE 2 @@ -6568,28 +9799,28 @@ #define NFC_NDEF_MSG_PARSER_LOG_ENABLED 0 #endif // NFC_NDEF_MSG_PARSER_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NFC_NDEF_MSG_PARSER_LOG_LEVEL #define NFC_NDEF_MSG_PARSER_LOG_LEVEL 3 #endif // NFC_NDEF_MSG_PARSER_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NFC_NDEF_MSG_PARSER_INFO_COLOR #define NFC_NDEF_MSG_PARSER_INFO_COLOR 0 @@ -6599,6 +9830,13 @@ // +// NFC_NDEF_RECORD_ENABLED - nfc_ndef_record - NFC NDEF Record generator module + + +#ifndef NFC_NDEF_RECORD_ENABLED +#define NFC_NDEF_RECORD_ENABLED 0 +#endif + // NFC_NDEF_RECORD_PARSER_ENABLED - nfc_ndef_record_parser - NFC NDEF Record parser module //========================================================== #ifndef NFC_NDEF_RECORD_PARSER_ENABLED @@ -6610,28 +9848,28 @@ #define NFC_NDEF_RECORD_PARSER_LOG_ENABLED 0 #endif // NFC_NDEF_RECORD_PARSER_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef NFC_NDEF_RECORD_PARSER_LOG_LEVEL #define NFC_NDEF_RECORD_PARSER_LOG_LEVEL 3 #endif // NFC_NDEF_RECORD_PARSER_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef NFC_NDEF_RECORD_PARSER_INFO_COLOR #define NFC_NDEF_RECORD_PARSER_INFO_COLOR 0 @@ -6641,23 +9879,44 @@ // +// NFC_NDEF_TEXT_RECORD_ENABLED - nfc_text_rec - Encoding data for a text record for NFC Tag + + +#ifndef NFC_NDEF_TEXT_RECORD_ENABLED +#define NFC_NDEF_TEXT_RECORD_ENABLED 0 +#endif + +// NFC_NDEF_URI_MSG_ENABLED - nfc_uri_msg - Encoding data for NDEF message with URI record for NFC Tag + + +#ifndef NFC_NDEF_URI_MSG_ENABLED +#define NFC_NDEF_URI_MSG_ENABLED 0 +#endif + +// NFC_NDEF_URI_REC_ENABLED - nfc_uri_rec - Encoding data for a URI record for NFC Tag + + +#ifndef NFC_NDEF_URI_REC_ENABLED +#define NFC_NDEF_URI_REC_ENABLED 0 +#endif + // NFC_T2T_HAL_ENABLED - nfc_t2t_hal - Hardware Abstraction Layer for NFC library. //========================================================== #ifndef NFC_T2T_HAL_ENABLED #define NFC_T2T_HAL_ENABLED 0 #endif // NFCT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef NFCT_CONFIG_IRQ_PRIORITY #define NFCT_CONFIG_IRQ_PRIORITY 7 @@ -6669,88 +9928,88 @@ #define HAL_NFC_CONFIG_LOG_ENABLED 0 #endif // HAL_NFC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef HAL_NFC_CONFIG_LOG_LEVEL #define HAL_NFC_CONFIG_LOG_LEVEL 3 #endif // HAL_NFC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_INFO_COLOR #define HAL_NFC_CONFIG_INFO_COLOR 0 #endif // HAL_NFC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_DEBUG_COLOR #define HAL_NFC_CONFIG_DEBUG_COLOR 0 #endif // HAL_NFC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef HAL_NFC_CONFIG_LOG_LEVEL #define HAL_NFC_CONFIG_LOG_LEVEL 3 #endif // HAL_NFC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_INFO_COLOR #define HAL_NFC_CONFIG_INFO_COLOR 0 #endif // HAL_NFC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_DEBUG_COLOR #define HAL_NFC_CONFIG_DEBUG_COLOR 0 @@ -6764,560 +10023,560 @@ #define HAL_NFC_CONFIG_DEBUG_PIN_ENABLED 0 #endif // HAL_NFC_HCLOCK_ON_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_ON_DEBUG_PIN #define HAL_NFC_HCLOCK_ON_DEBUG_PIN 11 #endif // HAL_NFC_HCLOCK_OFF_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_OFF_DEBUG_PIN #define HAL_NFC_HCLOCK_OFF_DEBUG_PIN 12 #endif // HAL_NFC_NFC_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_NFC_EVENT_DEBUG_PIN #define HAL_NFC_NFC_EVENT_DEBUG_PIN 24 #endif // HAL_NFC_DETECT_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_DETECT_EVENT_DEBUG_PIN #define HAL_NFC_DETECT_EVENT_DEBUG_PIN 25 #endif // HAL_NFC_TIMER4_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_TIMER4_EVENT_DEBUG_PIN #define HAL_NFC_TIMER4_EVENT_DEBUG_PIN 28 #endif // HAL_NFC_HCLOCK_ON_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_ON_DEBUG_PIN #define HAL_NFC_HCLOCK_ON_DEBUG_PIN 31 #endif // HAL_NFC_HCLOCK_OFF_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_OFF_DEBUG_PIN #define HAL_NFC_HCLOCK_OFF_DEBUG_PIN 31 #endif // HAL_NFC_NFC_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_NFC_EVENT_DEBUG_PIN #define HAL_NFC_NFC_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_DETECT_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_DETECT_EVENT_DEBUG_PIN #define HAL_NFC_DETECT_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_TIMER4_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_TIMER4_EVENT_DEBUG_PIN #define HAL_NFC_TIMER4_EVENT_DEBUG_PIN 31 @@ -7327,23 +10586,149 @@ // +// NFC_T2T_PARSER_ENABLED - nfc_type_2_tag_parser - Parser for decoding Type 2 Tag data +//========================================================== +#ifndef NFC_T2T_PARSER_ENABLED +#define NFC_T2T_PARSER_ENABLED 0 +#endif +// NFC_T2T_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T2T_PARSER_LOG_ENABLED +#define NFC_T2T_PARSER_LOG_ENABLED 0 +#endif +// NFC_T2T_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T2T_PARSER_LOG_LEVEL +#define NFC_T2T_PARSER_LOG_LEVEL 3 +#endif + +// NFC_T2T_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T2T_PARSER_INFO_COLOR +#define NFC_T2T_PARSER_INFO_COLOR 0 +#endif + +// + +// + +// NFC_T4T_APDU_ENABLED - nfc_t4t_apdu - APDU encoder/decoder for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_APDU_ENABLED +#define NFC_T4T_APDU_ENABLED 0 +#endif +// NFC_T4T_APDU_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_APDU_LOG_ENABLED +#define NFC_T4T_APDU_LOG_ENABLED 0 +#endif +// NFC_T4T_APDU_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_APDU_LOG_LEVEL +#define NFC_T4T_APDU_LOG_LEVEL 3 +#endif + +// NFC_T4T_APDU_LOG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_APDU_LOG_COLOR +#define NFC_T4T_APDU_LOG_COLOR 0 +#endif + +// + +// + +// NFC_T4T_CC_FILE_PARSER_ENABLED - nfc_t4t_cc_file - Capability Container file for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_CC_FILE_PARSER_ENABLED +#define NFC_T4T_CC_FILE_PARSER_ENABLED 0 +#endif +// NFC_T4T_CC_FILE_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_CC_FILE_PARSER_LOG_ENABLED +#define NFC_T4T_CC_FILE_PARSER_LOG_ENABLED 0 +#endif +// NFC_T4T_CC_FILE_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_CC_FILE_PARSER_LOG_LEVEL +#define NFC_T4T_CC_FILE_PARSER_LOG_LEVEL 3 +#endif + +// NFC_T4T_CC_FILE_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_CC_FILE_PARSER_INFO_COLOR +#define NFC_T4T_CC_FILE_PARSER_INFO_COLOR 0 +#endif + +// + +// + // NFC_T4T_HAL_ENABLED - nfc_t4t_hal - Hardware Abstraction Layer for NFC library. //========================================================== #ifndef NFC_T4T_HAL_ENABLED #define NFC_T4T_HAL_ENABLED 0 #endif // NFCT_CONFIG_IRQ_PRIORITY - Interrupt priority - + // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 #ifndef NFCT_CONFIG_IRQ_PRIORITY #define NFCT_CONFIG_IRQ_PRIORITY 7 @@ -7355,88 +10740,88 @@ #define HAL_NFC_CONFIG_LOG_ENABLED 0 #endif // HAL_NFC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef HAL_NFC_CONFIG_LOG_LEVEL #define HAL_NFC_CONFIG_LOG_LEVEL 3 #endif // HAL_NFC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_INFO_COLOR #define HAL_NFC_CONFIG_INFO_COLOR 0 #endif // HAL_NFC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_DEBUG_COLOR #define HAL_NFC_CONFIG_DEBUG_COLOR 0 #endif // HAL_NFC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug #ifndef HAL_NFC_CONFIG_LOG_LEVEL #define HAL_NFC_CONFIG_LOG_LEVEL 3 #endif // HAL_NFC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_INFO_COLOR #define HAL_NFC_CONFIG_INFO_COLOR 0 #endif // HAL_NFC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White #ifndef HAL_NFC_CONFIG_DEBUG_COLOR #define HAL_NFC_CONFIG_DEBUG_COLOR 0 @@ -7450,560 +10835,560 @@ #define HAL_NFC_CONFIG_DEBUG_PIN_ENABLED 0 #endif // HAL_NFC_HCLOCK_ON_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_ON_DEBUG_PIN #define HAL_NFC_HCLOCK_ON_DEBUG_PIN 31 #endif // HAL_NFC_HCLOCK_OFF_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_OFF_DEBUG_PIN #define HAL_NFC_HCLOCK_OFF_DEBUG_PIN 31 #endif // HAL_NFC_NFC_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_NFC_EVENT_DEBUG_PIN #define HAL_NFC_NFC_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_DETECT_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_DETECT_EVENT_DEBUG_PIN #define HAL_NFC_DETECT_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_TIMER4_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_TIMER4_EVENT_DEBUG_PIN #define HAL_NFC_TIMER4_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_HCLOCK_ON_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_ON_DEBUG_PIN #define HAL_NFC_HCLOCK_ON_DEBUG_PIN 31 #endif // HAL_NFC_HCLOCK_OFF_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_HCLOCK_OFF_DEBUG_PIN #define HAL_NFC_HCLOCK_OFF_DEBUG_PIN 31 #endif // HAL_NFC_NFC_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_NFC_EVENT_DEBUG_PIN #define HAL_NFC_NFC_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_DETECT_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_DETECT_EVENT_DEBUG_PIN #define HAL_NFC_DETECT_EVENT_DEBUG_PIN 31 #endif // HAL_NFC_TIMER4_EVENT_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <32=> 32 (P1.0) -// <33=> 33 (P1.1) -// <34=> 34 (P1.2) -// <35=> 35 (P1.3) -// <36=> 36 (P1.4) -// <37=> 37 (P1.5) -// <38=> 38 (P1.6) -// <39=> 39 (P1.7) -// <40=> 40 (P1.8) -// <41=> 41 (P1.9) -// <42=> 42 (P1.10) -// <43=> 43 (P1.11) -// <44=> 44 (P1.12) -// <45=> 45 (P1.13) -// <46=> 46 (P1.14) -// <47=> 47 (P1.15) -// <4294967295=> Not connected + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) +// <4294967295=> Not connected #ifndef HAL_NFC_TIMER4_EVENT_DEBUG_PIN #define HAL_NFC_TIMER4_EVENT_DEBUG_PIN 31 @@ -8013,510 +11398,491 @@ // -// +// NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED - nfc_t4t_hl_detection_procedures - NDEF Detection Procedure for Type 4 Tag //========================================================== - -// nRF_Segger_RTT - +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED +#define NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED 0 +#endif +// NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED - Enables logging in the module. //========================================================== -// segger_rtt - SEGGER RTT +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED +#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED 0 +#endif +// NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug -//========================================================== -// SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. -// Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE -// or this value is actually used. It depends on which one is bigger. - -#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP -#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL +#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL 3 #endif -// SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. -#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS -#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +// NFC_T4T_HL_DETECTION_PROCEDURES_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_INFO_COLOR +#define NFC_T4T_HL_DETECTION_PROCEDURES_INFO_COLOR 0 #endif -// SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. -#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN -#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 -#endif - -// SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. -#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS -#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 -#endif - -// SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. - - -// The following modes are supported: -// - SKIP - Do not block, output nothing. -// - TRIM - Do not block, output as much as fits. -// - BLOCK - Wait until there is space in the buffer. -// <0=> SKIP -// <1=> TRIM -// <2=> BLOCK_IF_FIFO_FULL - -#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE -#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 -#endif - -// -//========================================================== - -// -//========================================================== - -// nRF_SoftDevice - -//========================================================== -// NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler -//========================================================== -#ifndef NRF_SDH_ANT_ENABLED -#define NRF_SDH_ANT_ENABLED 0 -#endif -// ANT Channels - -//========================================================== -// NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. -#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED -#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 0 -#endif - -// NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. -#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS -#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0 -#endif - -// -//========================================================== - -// ANT Queues - -//========================================================== -// NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. -#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE -#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32 -#endif - -// NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. -#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE -#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128 -#endif - -// -//========================================================== - -// ANT Observers - Observers and priority levels - -//========================================================== -// NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. -// This setting configures the number of priority levels available for the ANT event handlers. -// The priority level of a handler determines the order in which it receives events, with respect to other handlers. - -#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS -#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2 -#endif - -// ANT Observers priorities - Invididual priorities - -//========================================================== -// ANT_BPWR_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the Bicycle Power Profile. - -#ifndef ANT_BPWR_ANT_OBSERVER_PRIO -#define ANT_BPWR_ANT_OBSERVER_PRIO 1 -#endif - -// ANT_BSC_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile. - -#ifndef ANT_BSC_ANT_OBSERVER_PRIO -#define ANT_BSC_ANT_OBSERVER_PRIO 1 -#endif - -// ANT_ENCRYPT_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module. - -#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO -#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1 -#endif - -// ANT_HRM_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the Heart Rate Monitor. - -#ifndef ANT_HRM_ANT_OBSERVER_PRIO -#define ANT_HRM_ANT_OBSERVER_PRIO 1 -#endif - -// ANT_SDM_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile. - -#ifndef ANT_SDM_ANT_OBSERVER_PRIO -#define ANT_SDM_ANT_OBSERVER_PRIO 1 -#endif - -// ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the ANT state indicator module. - -#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO -#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1 -#endif - -// BSP_BTN_ANT_OBSERVER_PRIO -// Priority with which ANT events are dispatched to the Button Control module. - -#ifndef BSP_BTN_ANT_OBSERVER_PRIO -#define BSP_BTN_ANT_OBSERVER_PRIO 1 -#endif - -// -//========================================================== - -// -//========================================================== - - // +// APDU_BUFF_SIZE - Size (in bytes) of the buffer for APDU storage +#ifndef APDU_BUFF_SIZE +#define APDU_BUFF_SIZE 250 +#endif + +// CC_STORAGE_BUFF_SIZE - Size (in bytes) of the buffer for CC file storage +#ifndef CC_STORAGE_BUFF_SIZE +#define CC_STORAGE_BUFF_SIZE 64 +#endif + +// + +// NFC_T4T_TLV_BLOCK_PARSER_ENABLED - nfc_t4t_tlv_block - TLV block for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_TLV_BLOCK_PARSER_ENABLED +#define NFC_T4T_TLV_BLOCK_PARSER_ENABLED 0 +#endif +// NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED +#define NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED 0 +#endif +// NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL +#define NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL 3 +#endif + +// NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR +#define NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR 0 +#endif + +// + +// + +// +//========================================================== + +// nRF_SoftDevice + +//========================================================== // NRF_SDH_BLE_ENABLED - nrf_sdh_ble - SoftDevice BLE event handler //========================================================== #ifndef NRF_SDH_BLE_ENABLED -#define NRF_SDH_BLE_ENABLED 1 +#define NRF_SDH_BLE_ENABLED 0 #endif // BLE Stack configuration - Stack configuration parameters -// These values are not used directly by the SoftDevice handler but the application or other libraries might depend on them. -// Keep them up-to-date with the desired configuration. +// The SoftDevice handler will configure the stack with these parameters when calling @ref nrf_sdh_ble_default_cfg_set. +// Other libraries might depend on these values; keep them up-to-date even if you are not explicitely calling @ref nrf_sdh_ble_default_cfg_set. //========================================================== -// NRF_SDH_BLE_PERIPHERAL_LINK_COUNT - Maximum number of peripheral links. +// NRF_SDH_BLE_GAP_DATA_LENGTH <27-251> + + +// Requested BLE GAP data length to be negotiated. + +#ifndef NRF_SDH_BLE_GAP_DATA_LENGTH +#define NRF_SDH_BLE_GAP_DATA_LENGTH 27 +#endif + +// NRF_SDH_BLE_PERIPHERAL_LINK_COUNT - Maximum number of peripheral links. #ifndef NRF_SDH_BLE_PERIPHERAL_LINK_COUNT #define NRF_SDH_BLE_PERIPHERAL_LINK_COUNT 0 #endif -// NRF_SDH_BLE_CENTRAL_LINK_COUNT - Maximum number of central links. +// NRF_SDH_BLE_CENTRAL_LINK_COUNT - Maximum number of central links. #ifndef NRF_SDH_BLE_CENTRAL_LINK_COUNT #define NRF_SDH_BLE_CENTRAL_LINK_COUNT 0 #endif -// NRF_SDH_BLE_TOTAL_LINK_COUNT - Maximum number of total concurrent connections using the default configuration. +// NRF_SDH_BLE_TOTAL_LINK_COUNT - Total link count. +// Maximum number of total concurrent connections using the default configuration. + #ifndef NRF_SDH_BLE_TOTAL_LINK_COUNT #define NRF_SDH_BLE_TOTAL_LINK_COUNT 1 #endif -// NRF_SDH_BLE_GAP_EVENT_LENGTH - The time set aside for this connection on every connection interval in 1.25 ms units. +// NRF_SDH_BLE_GAP_EVENT_LENGTH - GAP event length. +// The time set aside for this connection on every connection interval in 1.25 ms units. + #ifndef NRF_SDH_BLE_GAP_EVENT_LENGTH -#define NRF_SDH_BLE_GAP_EVENT_LENGTH 3 +#define NRF_SDH_BLE_GAP_EVENT_LENGTH 6 #endif -// NRF_SDH_BLE_GATT_MAX_MTU_SIZE - Static maximum MTU size. +// NRF_SDH_BLE_GATT_MAX_MTU_SIZE - Static maximum MTU size. #ifndef NRF_SDH_BLE_GATT_MAX_MTU_SIZE #define NRF_SDH_BLE_GATT_MAX_MTU_SIZE 23 #endif -// NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE - Attribute Table size in bytes. The size must be a multiple of 4. +// NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE - Attribute Table size in bytes. The size must be a multiple of 4. #ifndef NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE #define NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE 1408 #endif -// NRF_SDH_BLE_VS_UUID_COUNT - The number of vendor-specific UUIDs. +// NRF_SDH_BLE_VS_UUID_COUNT - The number of vendor-specific UUIDs. #ifndef NRF_SDH_BLE_VS_UUID_COUNT #define NRF_SDH_BLE_VS_UUID_COUNT 0 #endif // NRF_SDH_BLE_SERVICE_CHANGED - Include the Service Changed characteristic in the Attribute Table. - + #ifndef NRF_SDH_BLE_SERVICE_CHANGED #define NRF_SDH_BLE_SERVICE_CHANGED 0 #endif -// +// //========================================================== // BLE Observers - Observers and priority levels //========================================================== -// NRF_SDH_BLE_OBSERVER_PRIO_LEVELS - Total number of priority levels for BLE observers. +// NRF_SDH_BLE_OBSERVER_PRIO_LEVELS - Total number of priority levels for BLE observers. // This setting configures the number of priority levels available for BLE event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. #ifndef NRF_SDH_BLE_OBSERVER_PRIO_LEVELS -#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 3 +#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 4 #endif // BLE Observers priorities - Invididual priorities //========================================================== -// BLE_ADV_BLE_OBSERVER_PRIO +// BLE_ADV_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Advertising module. #ifndef BLE_ADV_BLE_OBSERVER_PRIO -#define BLE_ADV_BLE_OBSERVER_PRIO 2 +#define BLE_ADV_BLE_OBSERVER_PRIO 1 #endif -// BLE_ANCS_C_BLE_OBSERVER_PRIO +// BLE_ANCS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Apple Notification Service Client. #ifndef BLE_ANCS_C_BLE_OBSERVER_PRIO #define BLE_ANCS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_ANS_C_BLE_OBSERVER_PRIO +// BLE_ANS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Alert Notification Service Client. #ifndef BLE_ANS_C_BLE_OBSERVER_PRIO #define BLE_ANS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_BAS_BLE_OBSERVER_PRIO +// BLE_BAS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Battery Service. #ifndef BLE_BAS_BLE_OBSERVER_PRIO #define BLE_BAS_BLE_OBSERVER_PRIO 2 #endif -// BLE_BAS_C_BLE_OBSERVER_PRIO +// BLE_BAS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Battery Service Client. #ifndef BLE_BAS_C_BLE_OBSERVER_PRIO #define BLE_BAS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_BPS_BLE_OBSERVER_PRIO +// BLE_BPS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Blood Pressure Service. #ifndef BLE_BPS_BLE_OBSERVER_PRIO #define BLE_BPS_BLE_OBSERVER_PRIO 2 #endif -// BLE_CONN_PARAMS_BLE_OBSERVER_PRIO +// BLE_CONN_PARAMS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Connection parameters module. #ifndef BLE_CONN_PARAMS_BLE_OBSERVER_PRIO -#define BLE_CONN_PARAMS_BLE_OBSERVER_PRIO 2 +#define BLE_CONN_PARAMS_BLE_OBSERVER_PRIO 1 #endif -// BLE_CONN_STATE_BLE_OBSERVER_PRIO +// BLE_CONN_STATE_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Connection State module. #ifndef BLE_CONN_STATE_BLE_OBSERVER_PRIO #define BLE_CONN_STATE_BLE_OBSERVER_PRIO 0 #endif -// BLE_CSCS_BLE_OBSERVER_PRIO +// BLE_CSCS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Cycling Speed and Cadence Service. #ifndef BLE_CSCS_BLE_OBSERVER_PRIO #define BLE_CSCS_BLE_OBSERVER_PRIO 2 #endif -// BLE_CTS_C_BLE_OBSERVER_PRIO +// BLE_CTS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Current Time Service Client. #ifndef BLE_CTS_C_BLE_OBSERVER_PRIO #define BLE_CTS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_DB_DISC_BLE_OBSERVER_PRIO +// BLE_DB_DISC_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Database Discovery module. #ifndef BLE_DB_DISC_BLE_OBSERVER_PRIO #define BLE_DB_DISC_BLE_OBSERVER_PRIO 1 #endif -// BLE_DFU_BLE_OBSERVER_PRIO +// BLE_DFU_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the DFU Service. #ifndef BLE_DFU_BLE_OBSERVER_PRIO #define BLE_DFU_BLE_OBSERVER_PRIO 2 #endif -// BLE_GLS_BLE_OBSERVER_PRIO +// BLE_DIS_C_BLE_OBSERVER_PRIO +// Priority with which BLE events are dispatched to the Device Information Client. + +#ifndef BLE_DIS_C_BLE_OBSERVER_PRIO +#define BLE_DIS_C_BLE_OBSERVER_PRIO 2 +#endif + +// BLE_GLS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Glucose Service. #ifndef BLE_GLS_BLE_OBSERVER_PRIO #define BLE_GLS_BLE_OBSERVER_PRIO 2 #endif -// BLE_HIDS_BLE_OBSERVER_PRIO +// BLE_HIDS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Human Interface Device Service. #ifndef BLE_HIDS_BLE_OBSERVER_PRIO #define BLE_HIDS_BLE_OBSERVER_PRIO 2 #endif -// BLE_HRS_BLE_OBSERVER_PRIO +// BLE_HRS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Heart Rate Service. #ifndef BLE_HRS_BLE_OBSERVER_PRIO #define BLE_HRS_BLE_OBSERVER_PRIO 2 #endif -// BLE_HRS_C_BLE_OBSERVER_PRIO +// BLE_HRS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Heart Rate Service Client. #ifndef BLE_HRS_C_BLE_OBSERVER_PRIO #define BLE_HRS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_HTS_BLE_OBSERVER_PRIO +// BLE_HTS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Health Thermometer Service. #ifndef BLE_HTS_BLE_OBSERVER_PRIO #define BLE_HTS_BLE_OBSERVER_PRIO 2 #endif -// BLE_IAS_BLE_OBSERVER_PRIO +// BLE_IAS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Immediate Alert Service. #ifndef BLE_IAS_BLE_OBSERVER_PRIO #define BLE_IAS_BLE_OBSERVER_PRIO 2 #endif -// BLE_IAS_C_BLE_OBSERVER_PRIO +// BLE_IAS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Immediate Alert Service Client. #ifndef BLE_IAS_C_BLE_OBSERVER_PRIO #define BLE_IAS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_LBS_BLE_OBSERVER_PRIO +// BLE_LBS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the LED Button Service. #ifndef BLE_LBS_BLE_OBSERVER_PRIO #define BLE_LBS_BLE_OBSERVER_PRIO 2 #endif -// BLE_LBS_C_BLE_OBSERVER_PRIO +// BLE_LBS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the LED Button Service Client. #ifndef BLE_LBS_C_BLE_OBSERVER_PRIO #define BLE_LBS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_LLS_BLE_OBSERVER_PRIO +// BLE_LESC_OBSERVER_PRIO +// Priority with which BLE events are dispatched to the BLE LESC module. + +#ifndef BLE_LESC_OBSERVER_PRIO +#define BLE_LESC_OBSERVER_PRIO 2 +#endif + +// BLE_LLS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Link Loss Service. #ifndef BLE_LLS_BLE_OBSERVER_PRIO #define BLE_LLS_BLE_OBSERVER_PRIO 2 #endif -// BLE_LNS_BLE_OBSERVER_PRIO +// BLE_LNS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Location Navigation Service. #ifndef BLE_LNS_BLE_OBSERVER_PRIO #define BLE_LNS_BLE_OBSERVER_PRIO 2 #endif -// BLE_NUS_BLE_OBSERVER_PRIO +// BLE_NUS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the UART Service. #ifndef BLE_NUS_BLE_OBSERVER_PRIO #define BLE_NUS_BLE_OBSERVER_PRIO 2 #endif -// BLE_NUS_C_BLE_OBSERVER_PRIO +// BLE_NUS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the UART Central Service. #ifndef BLE_NUS_C_BLE_OBSERVER_PRIO #define BLE_NUS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_OTS_BLE_OBSERVER_PRIO +// BLE_OTS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Object transfer service. #ifndef BLE_OTS_BLE_OBSERVER_PRIO #define BLE_OTS_BLE_OBSERVER_PRIO 2 #endif -// BLE_OTS_C_BLE_OBSERVER_PRIO +// BLE_OTS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Object transfer service client. #ifndef BLE_OTS_C_BLE_OBSERVER_PRIO #define BLE_OTS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_RSCS_BLE_OBSERVER_PRIO +// BLE_RSCS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Running Speed and Cadence Service. #ifndef BLE_RSCS_BLE_OBSERVER_PRIO #define BLE_RSCS_BLE_OBSERVER_PRIO 2 #endif -// BLE_RSCS_C_BLE_OBSERVER_PRIO +// BLE_RSCS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Running Speed and Cadence Client. #ifndef BLE_RSCS_C_BLE_OBSERVER_PRIO #define BLE_RSCS_C_BLE_OBSERVER_PRIO 2 #endif -// BLE_TPS_BLE_OBSERVER_PRIO +// BLE_TPS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the TX Power Service. #ifndef BLE_TPS_BLE_OBSERVER_PRIO #define BLE_TPS_BLE_OBSERVER_PRIO 2 #endif -// BSP_BTN_BLE_OBSERVER_PRIO +// BSP_BTN_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Button Control module. #ifndef BSP_BTN_BLE_OBSERVER_PRIO #define BSP_BTN_BLE_OBSERVER_PRIO 1 #endif -// NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the NFC pairing library. #ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO #define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 #endif -// NRF_BLE_BMS_BLE_OBSERVER_PRIO +// NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// NRF_BLE_BMS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Bond Management Service. #ifndef NRF_BLE_BMS_BLE_OBSERVER_PRIO #define NRF_BLE_BMS_BLE_OBSERVER_PRIO 2 #endif -// NRF_BLE_CGMS_BLE_OBSERVER_PRIO +// NRF_BLE_CGMS_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Contiuon Glucose Monitoring Service. #ifndef NRF_BLE_CGMS_BLE_OBSERVER_PRIO #define NRF_BLE_CGMS_BLE_OBSERVER_PRIO 2 #endif -// NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO +// NRF_BLE_ES_BLE_OBSERVER_PRIO +// Priority with which BLE events are dispatched to the Eddystone module. + +#ifndef NRF_BLE_ES_BLE_OBSERVER_PRIO +#define NRF_BLE_ES_BLE_OBSERVER_PRIO 2 +#endif + +// NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the GATT Service Client. #ifndef NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO #define NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO 2 #endif -// NRF_BLE_GATT_BLE_OBSERVER_PRIO +// NRF_BLE_GATT_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the GATT module. #ifndef NRF_BLE_GATT_BLE_OBSERVER_PRIO -#define NRF_BLE_GATT_BLE_OBSERVER_PRIO 2 +#define NRF_BLE_GATT_BLE_OBSERVER_PRIO 1 #endif -// NRF_BLE_QWR_BLE_OBSERVER_PRIO +// NRF_BLE_QWR_BLE_OBSERVER_PRIO // Priority with which BLE events are dispatched to the Queued writes module. #ifndef NRF_BLE_QWR_BLE_OBSERVER_PRIO #define NRF_BLE_QWR_BLE_OBSERVER_PRIO 2 #endif -// PM_BLE_OBSERVER_PRIO -// Priority with which BLE events are dispatched to the Peer Manager module. - +// PM_BLE_OBSERVER_PRIO - Priority with which BLE events are dispatched to the Peer Manager module. #ifndef PM_BLE_OBSERVER_PRIO -#define PM_BLE_OBSERVER_PRIO 2 +#define PM_BLE_OBSERVER_PRIO 1 #endif -// +// //========================================================== -// +// //========================================================== @@ -8525,46 +11891,46 @@ // NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler //========================================================== #ifndef NRF_SDH_ENABLED -#define NRF_SDH_ENABLED 1 +#define NRF_SDH_ENABLED 0 #endif -// Dispatch model +// Dispatch model // This setting configures how Stack events are dispatched to the application. //========================================================== // NRF_SDH_DISPATCH_MODEL - + // NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context. // NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler. // NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually. -// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT -// <1=> NRF_SDH_DISPATCH_MODEL_APPSH -// <2=> NRF_SDH_DISPATCH_MODEL_POLLING +// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT +// <1=> NRF_SDH_DISPATCH_MODEL_APPSH +// <2=> NRF_SDH_DISPATCH_MODEL_POLLING #ifndef NRF_SDH_DISPATCH_MODEL #define NRF_SDH_DISPATCH_MODEL 0 #endif -// +// //========================================================== // Clock - SoftDevice clock configuration //========================================================== // NRF_SDH_CLOCK_LF_SRC - SoftDevice clock source. - -// <0=> NRF_CLOCK_LF_SRC_RC -// <1=> NRF_CLOCK_LF_SRC_XTAL -// <2=> NRF_CLOCK_LF_SRC_SYNTH + +// <0=> NRF_CLOCK_LF_SRC_RC +// <1=> NRF_CLOCK_LF_SRC_XTAL +// <2=> NRF_CLOCK_LF_SRC_SYNTH #include "nrf5x_lf_clk_helper.h" -// NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. +// NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. #ifndef NRF_SDH_CLOCK_LF_RC_CTIV #define NRF_SDH_CLOCK_LF_RC_CTIV 0 #endif -// NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. +// NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. // How often (in number of calibration intervals) the RC oscillator shall be calibrated // if the temperature has not changed. @@ -8572,28 +11938,32 @@ #define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0 #endif -// NRF_SDH_CLOCK_LF_XTAL_ACCURACY - External crystal clock accuracy used in the LL to compute timing windows. +// NRF_SDH_CLOCK_LF_ACCURACY - External clock accuracy used in the LL to compute timing. + +// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM +// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM +// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM +// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM +// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM +// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM +// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM +// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM +// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM +// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM +// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM +// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM -// <0=> NRF_CLOCK_LF_XTAL_ACCURACY_250_PPM -// <1=> NRF_CLOCK_LF_XTAL_ACCURACY_500_PPM -// <2=> NRF_CLOCK_LF_XTAL_ACCURACY_150_PPM -// <3=> NRF_CLOCK_LF_XTAL_ACCURACY_100_PPM -// <4=> NRF_CLOCK_LF_XTAL_ACCURACY_75_PPM -// <5=> NRF_CLOCK_LF_XTAL_ACCURACY_50_PPM -// <6=> NRF_CLOCK_LF_XTAL_ACCURACY_30_PPM -// <7=> NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM - -#ifndef NRF_SDH_CLOCK_LF_XTAL_ACCURACY -#define NRF_SDH_CLOCK_LF_XTAL_ACCURACY 7 +#ifndef NRF_SDH_CLOCK_LF_ACCURACY +#define NRF_SDH_CLOCK_LF_ACCURACY 7 #endif -// +// //========================================================== // SDH Observers - Observers and priority levels //========================================================== -// NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. +// NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. // This setting configures the number of priority levels available for the SoftDevice request event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. @@ -8601,7 +11971,7 @@ #define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2 #endif -// NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. +// NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. // This setting configures the number of priority levels available for the SoftDevice state event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. @@ -8609,7 +11979,7 @@ #define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2 #endif -// NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. +// NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. // This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC). // The priority level of a handler determines the order in which it receives events, with respect to other handlers. @@ -8621,34 +11991,34 @@ // State Observers priorities - Invididual priorities //========================================================== -// CLOCK_CONFIG_STATE_OBSERVER_PRIO +// CLOCK_CONFIG_STATE_OBSERVER_PRIO // Priority with which state events are dispatched to the Clock driver. #ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO #define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0 #endif -// POWER_CONFIG_STATE_OBSERVER_PRIO +// POWER_CONFIG_STATE_OBSERVER_PRIO // Priority with which state events are dispatched to the Power driver. #ifndef POWER_CONFIG_STATE_OBSERVER_PRIO #define POWER_CONFIG_STATE_OBSERVER_PRIO 0 #endif -// RNG_CONFIG_STATE_OBSERVER_PRIO +// RNG_CONFIG_STATE_OBSERVER_PRIO // Priority with which state events are dispatched to this module. #ifndef RNG_CONFIG_STATE_OBSERVER_PRIO #define RNG_CONFIG_STATE_OBSERVER_PRIO 0 #endif -// +// //========================================================== // Stack Event Observers priorities - Invididual priorities //========================================================== -// NRF_SDH_ANT_STACK_OBSERVER_PRIO +// NRF_SDH_ANT_STACK_OBSERVER_PRIO // This setting configures the priority with which ANT events are processed with respect to other events coming from the stack. // Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC. // Zero is the highest priority. @@ -8657,7 +12027,7 @@ #define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0 #endif -// NRF_SDH_BLE_STACK_OBSERVER_PRIO +// NRF_SDH_BLE_STACK_OBSERVER_PRIO // This setting configures the priority with which BLE events are processed with respect to other events coming from the stack. // Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC. // Zero is the highest priority. @@ -8666,7 +12036,7 @@ #define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0 #endif -// NRF_SDH_SOC_STACK_OBSERVER_PRIO +// NRF_SDH_SOC_STACK_OBSERVER_PRIO // This setting configures the priority with which SoC events are processed with respect to other events coming from the stack. // Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE. // Zero is the highest priority. @@ -8675,10 +12045,10 @@ #define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0 #endif -// +// //========================================================== -// +// //========================================================== @@ -8692,7 +12062,7 @@ // SoC Observers - Observers and priority levels //========================================================== -// NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. +// NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. // This setting configures the number of priority levels available for the SoC event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. @@ -8703,44 +12073,44 @@ // SoC Observers priorities - Invididual priorities //========================================================== -// BLE_ADV_SOC_OBSERVER_PRIO +// BLE_ADV_SOC_OBSERVER_PRIO // Priority with which SoC events are dispatched to the Advertising module. #ifndef BLE_ADV_SOC_OBSERVER_PRIO #define BLE_ADV_SOC_OBSERVER_PRIO 1 #endif -// BLE_DFU_SOC_OBSERVER_PRIO +// BLE_DFU_SOC_OBSERVER_PRIO // Priority with which BLE events are dispatched to the DFU Service. #ifndef BLE_DFU_SOC_OBSERVER_PRIO #define BLE_DFU_SOC_OBSERVER_PRIO 1 #endif -// CLOCK_CONFIG_SOC_OBSERVER_PRIO +// CLOCK_CONFIG_SOC_OBSERVER_PRIO // Priority with which SoC events are dispatched to the Clock driver. #ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO #define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0 #endif -// POWER_CONFIG_SOC_OBSERVER_PRIO +// POWER_CONFIG_SOC_OBSERVER_PRIO // Priority with which SoC events are dispatched to the Power driver. #ifndef POWER_CONFIG_SOC_OBSERVER_PRIO #define POWER_CONFIG_SOC_OBSERVER_PRIO 0 #endif -// +// //========================================================== -// +// //========================================================== // -// +// //========================================================== // <<< end of configuration section >>> diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/config/sdk_config.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/config/sdk_config.h index 8559dd30e9..bef4c0ee36 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/config/sdk_config.h +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/config/sdk_config.h @@ -3218,40 +3218,34 @@ // -// needed to build -#define NRFX_SPIM0_ENABLED 1 -#define NRFX_SPIM1_ENABLED 1 -#define NRFX_SPIM2_ENABLED 1 - - // NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver //========================================================== #ifndef NRFX_SPIM_ENABLED -#define NRFX_SPIM_ENABLED 0 +#define NRFX_SPIM_ENABLED 1 #endif // NRFX_SPIM0_ENABLED - Enable SPIM0 instance - + #ifndef NRFX_SPIM0_ENABLED -#define NRFX_SPIM0_ENABLED 0 +#define NRFX_SPIM0_ENABLED 1 #endif // NRFX_SPIM1_ENABLED - Enable SPIM1 instance #ifndef NRFX_SPIM1_ENABLED -#define NRFX_SPIM1_ENABLED 0 +#define NRFX_SPIM1_ENABLED 1 #endif // NRFX_SPIM2_ENABLED - Enable SPIM2 instance - + #ifndef NRFX_SPIM2_ENABLED -#define NRFX_SPIM2_ENABLED 0 +#define NRFX_SPIM2_ENABLED 1 #endif // NRFX_SPIM3_ENABLED - Enable SPIM3 instance - + #ifndef NRFX_SPIM3_ENABLED #define NRFX_SPIM3_ENABLED 0 @@ -3452,18 +3446,15 @@ // NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver //========================================================== -// needed these to build! -#define NRFX_SPI_ENABLED 1 -#define NRFX_SPI0_ENABLED 1 #ifndef NRFX_SPI_ENABLED -#define NRFX_SPI_ENABLED 0 +#define NRFX_SPI_ENABLED 1 #endif // NRFX_SPI0_ENABLED - Enable SPI0 instance - + #ifndef NRFX_SPI0_ENABLED -#define NRFX_SPI0_ENABLED 0 +#define NRFX_SPI0_ENABLED 1 #endif // NRFX_SPI1_ENABLED - Enable SPI1 instance @@ -5224,18 +5215,13 @@ #define NRF_SPI_DRV_MISO_PULLUP_CFG 1 #endif -// needed these to build! -#define SPI0_ENABLED 1 -#define SPI1_ENABLED 1 -#define SPI2_ENABLED 1 - // SPI0_ENABLED - Enable SPI0 instance //========================================================== #ifndef SPI0_ENABLED -#define SPI0_ENABLED 0 +#define SPI0_ENABLED 1 #endif // SPI0_USE_EASY_DMA - Use EasyDMA - + #ifndef SPI0_USE_EASY_DMA #define SPI0_USE_EASY_DMA 1 @@ -5246,10 +5232,10 @@ // SPI1_ENABLED - Enable SPI1 instance //========================================================== #ifndef SPI1_ENABLED -#define SPI1_ENABLED 0 +#define SPI1_ENABLED 1 #endif // SPI1_USE_EASY_DMA - Use EasyDMA - + #ifndef SPI1_USE_EASY_DMA #define SPI1_USE_EASY_DMA 1 @@ -5260,10 +5246,10 @@ // SPI2_ENABLED - Enable SPI2 instance //========================================================== #ifndef SPI2_ENABLED -#define SPI2_ENABLED 0 +#define SPI2_ENABLED 1 #endif // SPI2_USE_EASY_DMA - Use EasyDMA - + #ifndef SPI2_USE_EASY_DMA #define SPI2_USE_EASY_DMA 1 @@ -5608,12 +5594,10 @@ #define UART_LEGACY_SUPPORT 1 #endif -// needed for Mbed build -#define UART0_ENABLED 1 // UART0_ENABLED - Enable UART0 instance //========================================================== #ifndef UART0_ENABLED -#define UART0_ENABLED 0 +#define UART0_ENABLED 1 #endif // UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/i2c_api.c b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/i2c_api.c index 16ea14f919..e84078e0a9 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/i2c_api.c +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/i2c_api.c @@ -252,8 +252,10 @@ void i2c_configure_twi_instance(i2c_t *obj) /* Force resource release. This is necessary because mbed drivers don't * deinitialize on object destruction. */ - nrf_drv_common_irq_disable(nrf_drv_get_IRQn((void *) nordic_nrf5_twi_register[instance])); - nrf_drv_common_per_res_release(nordic_nrf5_twi_register[instance]); + NRFX_IRQ_DISABLE((nrfx_get_irq_number((void const*)nordic_nrf5_twi_register[instance]))); +// RF - there doesn't appear to be a replacement for nrf_drv_common_per_res_release() ! +// futher investigation required +// nrf_drv_common_per_res_release(nordic_nrf5_twi_register[instance]); /* Reset shorts register. */ nrf_twi_shorts_set(nordic_nrf5_twi_register[instance], 0); @@ -585,8 +587,9 @@ static void i2c_configure_driver_instance(i2c_t *obj) /* Force resource release. This is necessary because mbed drivers don't * deinitialize on object destruction. */ - nrf_drv_common_irq_disable(nrf_drv_get_IRQn((void *) nordic_nrf5_twi_register[instance])); - nrf_drv_common_per_res_release(nordic_nrf5_twi_register[instance]); + NRFX_IRQ_DISABLE((nrfx_get_irq_number((void const*)nordic_nrf5_twi_register[instance]))); +// RF - there doesn't appear to be a replacement for nrf_drv_common_per_res_release() ! +// nrf_drv_common_per_res_release(nordic_nrf5_twi_register[instance]); /* Configure driver with new settings. */ nrf_drv_twi_config_t twi_config = { diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/serial_api.c b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/serial_api.c index 2612c282e2..95fcd0dcb1 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/serial_api.c +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/serial_api.c @@ -46,9 +46,7 @@ #include "nrf_atfifo.h" #include "app_util_platform.h" #include "pinmap_ex.h" -#include "nrf_drv_ppi.h" -#include "nrf_drv_gpiote.h" -#include "PeripheralPins.h" +#include "nrfx_glue.h" #include "platform/mbed_atomic.h" #include "platform/mbed_critical.h" @@ -850,9 +848,32 @@ void serial_init(serial_t *obj, PinName tx, PinName rx) nrf_drv_gpiote_init(); } + /* Register RTC2 ISR. */ + NVIC_SetVector(RTC2_IRQn, (uint32_t) nordic_nrf5_rtc2_handler); + + /* Clear RTC2 channel events. */ + nrf_rtc_event_clear(NRF_RTC2, NRF_RTC_EVENT_COMPARE_0); + nrf_rtc_event_clear(NRF_RTC2, NRF_RTC_EVENT_COMPARE_1); + + /* Enable interrupts for all four RTC2 channels. */ + nrf_rtc_event_enable(NRF_RTC2, + NRF_RTC_INT_COMPARE0_MASK | + NRF_RTC_INT_COMPARE1_MASK); + + /* Enable RTC2 IRQ. Priority is set to highest so that the UARTE ISR can't interrupt it. */ + NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number((void const*)RTC2_IRQn), APP_IRQ_PRIORITY_HIGHEST); + NRFX_IRQ_ENABLE(nrfx_get_irq_number((void const*)RTC2_IRQn)); + + + /* Start RTC2. According to the datasheet the added power consumption is neglible so + * the RTC2 will run forever. + */ + nrf_rtc_task_trigger(NRF_RTC2, NRF_RTC_TASK_START); + /* Enable interrupts for SWI. */ NVIC_SetVector(SWI0_EGU0_IRQn, (uint32_t) nordic_nrf5_uart_swi0); - nrf_drv_common_irq_enable(SWI0_EGU0_IRQn, APP_IRQ_PRIORITY_LOWEST); + NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number((void const*)SWI0_EGU0_IRQn), APP_IRQ_PRIORITY_LOWEST); + NRFX_IRQ_ENABLE(nrfx_get_irq_number((void const*)SWI0_EGU0_IRQn)); /* Initialize FIFO buffer for UARTE0. */ NRF_ATFIFO_INIT(nordic_nrf5_uart_fifo_0); @@ -872,7 +893,8 @@ void serial_init(serial_t *obj, PinName tx, PinName rx) nrf_uarte_int_disable(nordic_nrf5_uart_register[0], 0xFFFFFFFF); NVIC_SetVector(UARTE0_UART0_IRQn, (uint32_t) nordic_nrf5_uart0_handler); - nrf_drv_common_irq_enable(UARTE0_UART0_IRQn, APP_IRQ_PRIORITY_HIGHEST); + NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number((void const*)UARTE0_UART0_IRQn), APP_IRQ_PRIORITY_HIGHEST); + NRFX_IRQ_ENABLE(nrfx_get_irq_number((void const*)UARTE0_UART0_IRQn)); #if UART1_ENABLED /* Initialize FIFO buffer for UARTE1. */ @@ -893,7 +915,8 @@ void serial_init(serial_t *obj, PinName tx, PinName rx) nrf_uarte_int_disable(nordic_nrf5_uart_register[1], 0xFFFFFFFF); NVIC_SetVector(UARTE1_IRQn, (uint32_t) nordic_nrf5_uart1_handler); - nrf_drv_common_irq_enable(UARTE1_IRQn, APP_IRQ_PRIORITY_HIGHEST); + NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number(UARTE1_IRQn), APP_IRQ_PRIORITY_HIGHEST); + NRFX_IRQ_ENABLE(nrfx_get_irq_number(UARTE1_IRQn)); #endif } diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_licence-agreement.txt b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_licence-agreement.txt new file mode 100644 index 0000000000..a71adee7b9 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_licence-agreement.txt @@ -0,0 +1,35 @@ +Copyright (c) 2007 - 2018, Nordic Semiconductor ASA +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + +2. Redistributions in binary form, except as embedded into a Nordic + Semiconductor ASA integrated circuit in a product or a software update for + such product, must reproduce the above copyright notice, this list of + conditions and the following disclaimer in the documentation and/or other + materials provided with the distribution. + +3. Neither the name of Nordic Semiconductor ASA nor the names of its + contributors may be used to endorse or promote products derived from this + software without specific prior written permission. + +4. This software, with or without modification, must only be used with a + Nordic Semiconductor ASA integrated circuit. + +5. Any software provided in binary form under this license must not be reverse + engineered, decompiled, modified and/or disassembled. + +THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_migration-document.pdf b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_migration-document.pdf new file mode 100644 index 0000000000..e88cd69f04 Binary files /dev/null and b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_migration-document.pdf differ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_release-notes.pdf b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_release-notes.pdf new file mode 100644 index 0000000000..827c06bbfc Binary files /dev/null and b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/doc/s132_nrf52_6.0.0_release-notes.pdf differ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_err.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_err.h new file mode 100644 index 0000000000..1b4820dc3d --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_err.h @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_COMMON + @{ + @addtogroup nrf_error + @{ + @ingroup BLE_COMMON + @} + + @defgroup ble_err General error codes + @{ + + @brief General error code definitions for the BLE API. + + @ingroup BLE_COMMON +*/ +#ifndef NRF_BLE_ERR_H__ +#define NRF_BLE_ERR_H__ + +#include "nrf_error.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* @defgroup BLE_ERRORS Error Codes + * @{ */ +#define BLE_ERROR_NOT_ENABLED (NRF_ERROR_STK_BASE_NUM+0x001) /**< @ref sd_ble_enable has not been called. */ +#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid connection handle. */ +#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x003) /**< Invalid attribute handle. */ +#define BLE_ERROR_INVALID_ADV_HANDLE (NRF_ERROR_STK_BASE_NUM+0x004) /**< Invalid advertising handle. */ +#define BLE_ERROR_INVALID_ROLE (NRF_ERROR_STK_BASE_NUM+0x005) /**< Invalid role. */ +#define BLE_ERROR_BLOCKED_BY_OTHER_LINKS (NRF_ERROR_STK_BASE_NUM+0x006) /**< The attempt to change link settings failed due to the scheduling of other links. */ +/** @} */ + + +/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges + * @brief Assignment of subranges for module specific error codes. + * @note For specific error codes, see ble_.h or ble_error_.h. + * @{ */ +#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */ +#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */ +#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */ +#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */ +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif + + +/** + @} + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gap.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gap.h new file mode 100644 index 0000000000..8b13816106 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gap.h @@ -0,0 +1,2653 @@ +/* + * Copyright (c) 2011 - 2018, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_GAP Generic Access Profile (GAP) + @{ + @brief Definitions and prototypes for the GAP interface. + */ + +#ifndef BLE_GAP_H__ +#define BLE_GAP_H__ + +#include +#include "nrf_svc.h" +#include "nrf_error.h" +#include "ble_hci.h" +#include "ble_ranges.h" +#include "ble_types.h" +#include "ble_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@addtogroup BLE_GAP_ENUMERATIONS Enumerations + * @{ */ + +/**@brief GAP API SVC numbers. + */ +enum BLE_GAP_SVCS +{ + SD_BLE_GAP_ADDR_SET = BLE_GAP_SVC_BASE, /**< Set own Bluetooth Address. */ + SD_BLE_GAP_ADDR_GET = BLE_GAP_SVC_BASE + 1, /**< Get own Bluetooth Address. */ + SD_BLE_GAP_WHITELIST_SET = BLE_GAP_SVC_BASE + 2, /**< Set active whitelist. */ + SD_BLE_GAP_DEVICE_IDENTITIES_SET = BLE_GAP_SVC_BASE + 3, /**< Set device identity list. */ + SD_BLE_GAP_PRIVACY_SET = BLE_GAP_SVC_BASE + 4, /**< Set Privacy settings*/ + SD_BLE_GAP_PRIVACY_GET = BLE_GAP_SVC_BASE + 5, /**< Get Privacy settings*/ + SD_BLE_GAP_ADV_SET_CONFIGURE = BLE_GAP_SVC_BASE + 6, /**< Configure an advertising set. */ + SD_BLE_GAP_ADV_START = BLE_GAP_SVC_BASE + 7, /**< Start Advertising. */ + SD_BLE_GAP_ADV_STOP = BLE_GAP_SVC_BASE + 8, /**< Stop Advertising. */ + SD_BLE_GAP_CONN_PARAM_UPDATE = BLE_GAP_SVC_BASE + 9, /**< Connection Parameter Update. */ + SD_BLE_GAP_DISCONNECT = BLE_GAP_SVC_BASE + 10, /**< Disconnect. */ + SD_BLE_GAP_TX_POWER_SET = BLE_GAP_SVC_BASE + 11, /**< Set TX Power. */ + SD_BLE_GAP_APPEARANCE_SET = BLE_GAP_SVC_BASE + 12, /**< Set Appearance. */ + SD_BLE_GAP_APPEARANCE_GET = BLE_GAP_SVC_BASE + 13, /**< Get Appearance. */ + SD_BLE_GAP_PPCP_SET = BLE_GAP_SVC_BASE + 14, /**< Set PPCP. */ + SD_BLE_GAP_PPCP_GET = BLE_GAP_SVC_BASE + 15, /**< Get PPCP. */ + SD_BLE_GAP_DEVICE_NAME_SET = BLE_GAP_SVC_BASE + 16, /**< Set Device Name. */ + SD_BLE_GAP_DEVICE_NAME_GET = BLE_GAP_SVC_BASE + 17, /**< Get Device Name. */ + SD_BLE_GAP_AUTHENTICATE = BLE_GAP_SVC_BASE + 18, /**< Initiate Pairing/Bonding. */ + SD_BLE_GAP_SEC_PARAMS_REPLY = BLE_GAP_SVC_BASE + 19, /**< Reply with Security Parameters. */ + SD_BLE_GAP_AUTH_KEY_REPLY = BLE_GAP_SVC_BASE + 20, /**< Reply with an authentication key. */ + SD_BLE_GAP_LESC_DHKEY_REPLY = BLE_GAP_SVC_BASE + 21, /**< Reply with an LE Secure Connections DHKey. */ + SD_BLE_GAP_KEYPRESS_NOTIFY = BLE_GAP_SVC_BASE + 22, /**< Notify of a keypress during an authentication procedure. */ + SD_BLE_GAP_LESC_OOB_DATA_GET = BLE_GAP_SVC_BASE + 23, /**< Get the local LE Secure Connections OOB data. */ + SD_BLE_GAP_LESC_OOB_DATA_SET = BLE_GAP_SVC_BASE + 24, /**< Set the remote LE Secure Connections OOB data. */ + SD_BLE_GAP_ENCRYPT = BLE_GAP_SVC_BASE + 25, /**< Initiate encryption procedure. */ + SD_BLE_GAP_SEC_INFO_REPLY = BLE_GAP_SVC_BASE + 26, /**< Reply with Security Information. */ + SD_BLE_GAP_CONN_SEC_GET = BLE_GAP_SVC_BASE + 27, /**< Obtain connection security level. */ + SD_BLE_GAP_RSSI_START = BLE_GAP_SVC_BASE + 28, /**< Start reporting of changes in RSSI. */ + SD_BLE_GAP_RSSI_STOP = BLE_GAP_SVC_BASE + 29, /**< Stop reporting of changes in RSSI. */ + SD_BLE_GAP_SCAN_START = BLE_GAP_SVC_BASE + 30, /**< Start Scanning. */ + SD_BLE_GAP_SCAN_STOP = BLE_GAP_SVC_BASE + 31, /**< Stop Scanning. */ + SD_BLE_GAP_CONNECT = BLE_GAP_SVC_BASE + 32, /**< Connect. */ + SD_BLE_GAP_CONNECT_CANCEL = BLE_GAP_SVC_BASE + 33, /**< Cancel ongoing connection procedure. */ + SD_BLE_GAP_RSSI_GET = BLE_GAP_SVC_BASE + 34, /**< Get the last RSSI sample. */ + SD_BLE_GAP_PHY_UPDATE = BLE_GAP_SVC_BASE + 35, /**< Initiate or respond to a PHY Update Procedure. */ + SD_BLE_GAP_DATA_LENGTH_UPDATE = BLE_GAP_SVC_BASE + 36, /**< Initiate or respond to a Data Length Update Procedure. */ + SD_BLE_GAP_QOS_CHANNEL_SURVEY_START = BLE_GAP_SVC_BASE + 37, /**< Start Quality of Service (QoS) channel survey module. */ + SD_BLE_GAP_QOS_CHANNEL_SURVEY_STOP = BLE_GAP_SVC_BASE + 38, /**< Stop Quality of Service (QoS) channel survey module. */ +}; + +/**@brief GAP Event IDs. + * IDs that uniquely identify an event coming from the stack to the application. + */ +enum BLE_GAP_EVTS +{ + BLE_GAP_EVT_CONNECTED = BLE_GAP_EVT_BASE, + BLE_GAP_EVT_DISCONNECTED = BLE_GAP_EVT_BASE + 1, /**< Disconnected from peer. \n See @ref ble_gap_evt_disconnected_t. */ + BLE_GAP_EVT_CONN_PARAM_UPDATE = BLE_GAP_EVT_BASE + 2, /**< Connection Parameters updated. \n See @ref ble_gap_evt_conn_param_update_t. */ + BLE_GAP_EVT_SEC_PARAMS_REQUEST = BLE_GAP_EVT_BASE + 3, /**< Request to provide security parameters. \n Reply with @ref sd_ble_gap_sec_params_reply. \n See @ref ble_gap_evt_sec_params_request_t. */ + BLE_GAP_EVT_SEC_INFO_REQUEST = BLE_GAP_EVT_BASE + 4, /**< Request to provide security information. \n Reply with @ref sd_ble_gap_sec_info_reply. \n See @ref ble_gap_evt_sec_info_request_t. */ + BLE_GAP_EVT_PASSKEY_DISPLAY = BLE_GAP_EVT_BASE + 5, /**< Request to display a passkey to the user. \n In LESC Numeric Comparison, reply with @ref sd_ble_gap_auth_key_reply. \n See @ref ble_gap_evt_passkey_display_t. */ + BLE_GAP_EVT_KEY_PRESSED = BLE_GAP_EVT_BASE + 6, /**< Notification of a keypress on the remote device.\n See @ref ble_gap_evt_key_pressed_t */ + BLE_GAP_EVT_AUTH_KEY_REQUEST = BLE_GAP_EVT_BASE + 7, /**< Request to provide an authentication key. \n Reply with @ref sd_ble_gap_auth_key_reply. \n See @ref ble_gap_evt_auth_key_request_t. */ + BLE_GAP_EVT_LESC_DHKEY_REQUEST = BLE_GAP_EVT_BASE + 8, /**< Request to calculate an LE Secure Connections DHKey. \n Reply with @ref sd_ble_gap_lesc_dhkey_reply. \n See @ref ble_gap_evt_lesc_dhkey_request_t */ + BLE_GAP_EVT_AUTH_STATUS = BLE_GAP_EVT_BASE + 9, /**< Authentication procedure completed with status. \n See @ref ble_gap_evt_auth_status_t. */ + BLE_GAP_EVT_CONN_SEC_UPDATE = BLE_GAP_EVT_BASE + 10, /**< Connection security updated. \n See @ref ble_gap_evt_conn_sec_update_t. */ + BLE_GAP_EVT_TIMEOUT = BLE_GAP_EVT_BASE + 11, /**< Timeout expired. \n See @ref ble_gap_evt_timeout_t. */ + BLE_GAP_EVT_RSSI_CHANGED = BLE_GAP_EVT_BASE + 12, /**< RSSI report. \n See @ref ble_gap_evt_rssi_changed_t. */ + BLE_GAP_EVT_ADV_REPORT = BLE_GAP_EVT_BASE + 13, /**< Advertising report. \n See @ref ble_gap_evt_adv_report_t. */ + BLE_GAP_EVT_SEC_REQUEST = BLE_GAP_EVT_BASE + 14, /**< Security Request. \n See @ref ble_gap_evt_sec_request_t. */ + BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST = BLE_GAP_EVT_BASE + 15, /**< Connection Parameter Update Request. \n Reply with @ref sd_ble_gap_conn_param_update. \n See @ref ble_gap_evt_conn_param_update_request_t. */ + BLE_GAP_EVT_SCAN_REQ_REPORT = BLE_GAP_EVT_BASE + 16, /**< Scan request report. \n See @ref ble_gap_evt_scan_req_report_t. */ + BLE_GAP_EVT_PHY_UPDATE_REQUEST = BLE_GAP_EVT_BASE + 17, /**< PHY Update Request. \n Reply with @ref sd_ble_gap_phy_update. \n See @ref ble_gap_evt_phy_update_request_t. */ + BLE_GAP_EVT_PHY_UPDATE = BLE_GAP_EVT_BASE + 18, /**< PHY Update Procedure is complete. \n See @ref ble_gap_evt_phy_update_t. */ + BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST = BLE_GAP_EVT_BASE + 19, /**< Data Length Update Request. \n Reply with @ref sd_ble_gap_data_length_update.\n See @ref ble_gap_evt_data_length_update_request_t. */ + BLE_GAP_EVT_DATA_LENGTH_UPDATE = BLE_GAP_EVT_BASE + 20, /**< LL Data Channel PDU payload length updated. \n See @ref ble_gap_evt_data_length_update_t. */ + BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT = BLE_GAP_EVT_BASE + 21, /**< Channel survey report. \n See @ref ble_gap_evt_qos_channel_survey_report_t. */ + BLE_GAP_EVT_ADV_SET_TERMINATED = BLE_GAP_EVT_BASE + 22, /**< Advertising set terminated. \n See @ref ble_gap_evt_adv_set_terminated_t. */ +}; + +/**@brief GAP Option IDs. + * IDs that uniquely identify a GAP option. + */ +enum BLE_GAP_OPTS +{ + BLE_GAP_OPT_CH_MAP = BLE_GAP_OPT_BASE, /**< Channel Map. @ref ble_gap_opt_ch_map_t */ + BLE_GAP_OPT_LOCAL_CONN_LATENCY = BLE_GAP_OPT_BASE + 1, /**< Local connection latency. @ref ble_gap_opt_local_conn_latency_t */ + BLE_GAP_OPT_PASSKEY = BLE_GAP_OPT_BASE + 2, /**< Set passkey. @ref ble_gap_opt_passkey_t */ + BLE_GAP_OPT_COMPAT_MODE_1 = BLE_GAP_OPT_BASE + 3, /**< Compatibility mode. @ref ble_gap_opt_compat_mode_1_t */ + BLE_GAP_OPT_AUTH_PAYLOAD_TIMEOUT = BLE_GAP_OPT_BASE + 4, /**< Set Authenticated payload timeout. @ref ble_gap_opt_auth_payload_timeout_t */ + BLE_GAP_OPT_SLAVE_LATENCY_DISABLE = BLE_GAP_OPT_BASE + 5, /**< Disable slave latency. @ref ble_gap_opt_slave_latency_disable_t */ +}; + +/**@brief GAP Configuration IDs. + * + * IDs that uniquely identify a GAP configuration. + */ +enum BLE_GAP_CFGS +{ + BLE_GAP_CFG_ROLE_COUNT = BLE_GAP_CFG_BASE, /**< Role count configuration. */ + BLE_GAP_CFG_DEVICE_NAME = BLE_GAP_CFG_BASE + 1, /**< Device name configuration. */ +}; + +/**@brief GAP TX Power roles. + */ +enum BLE_GAP_TX_POWER_ROLES +{ + BLE_GAP_TX_POWER_ROLE_ADV = 1, /**< Advertiser role. */ + BLE_GAP_TX_POWER_ROLE_SCAN_INIT = 2, /**< Scanner and initiator role. */ + BLE_GAP_TX_POWER_ROLE_CONN = 3, /**< Connection role. */ +}; + +/** @} */ + +/**@addtogroup BLE_GAP_DEFINES Defines + * @{ */ + +/**@defgroup BLE_ERRORS_GAP SVC return values specific to GAP + * @{ */ +#define BLE_ERROR_GAP_UUID_LIST_MISMATCH (NRF_GAP_ERR_BASE + 0x000) /**< UUID list does not contain an integral number of UUIDs. */ +#define BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST (NRF_GAP_ERR_BASE + 0x001) /**< Use of Whitelist not permitted with discoverable advertising. */ +#define BLE_ERROR_GAP_INVALID_BLE_ADDR (NRF_GAP_ERR_BASE + 0x002) /**< The upper two bits of the address do not correspond to the specified address type. */ +#define BLE_ERROR_GAP_WHITELIST_IN_USE (NRF_GAP_ERR_BASE + 0x003) /**< Attempt to modify the whitelist while already in use by another operation. */ +#define BLE_ERROR_GAP_DEVICE_IDENTITIES_IN_USE (NRF_GAP_ERR_BASE + 0x004) /**< Attempt to modify the device identity list while already in use by another operation. */ +#define BLE_ERROR_GAP_DEVICE_IDENTITIES_DUPLICATE (NRF_GAP_ERR_BASE + 0x005) /**< The device identity list contains entries with duplicate identity addresses. */ +/**@} */ + + +/**@defgroup BLE_GAP_ROLES GAP Roles + * @{ */ +#define BLE_GAP_ROLE_INVALID 0x0 /**< Invalid Role. */ +#define BLE_GAP_ROLE_PERIPH 0x1 /**< Peripheral Role. */ +#define BLE_GAP_ROLE_CENTRAL 0x2 /**< Central Role. */ +/**@} */ + + +/**@defgroup BLE_GAP_TIMEOUT_SOURCES GAP Timeout sources + * @{ */ +#define BLE_GAP_TIMEOUT_SRC_SCAN 0x01 /**< Scanning timeout. */ +#define BLE_GAP_TIMEOUT_SRC_CONN 0x02 /**< Connection timeout. */ +#define BLE_GAP_TIMEOUT_SRC_AUTH_PAYLOAD 0x03 /**< Authenticated payload timeout. */ +/**@} */ + + +/**@defgroup BLE_GAP_ADDR_TYPES GAP Address types + * @{ */ +#define BLE_GAP_ADDR_TYPE_PUBLIC 0x00 /**< Public (identity) address.*/ +#define BLE_GAP_ADDR_TYPE_RANDOM_STATIC 0x01 /**< Random static (identity) address. */ +#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE 0x02 /**< Random private resolvable address. */ +#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03 /**< Random private non-resolvable address. */ +#define BLE_GAP_ADDR_TYPE_ANONYMOUS 0x7F /**< An advertiser may advertise without its address. + This type of advertising is called anonymous. */ +/**@} */ + + +/**@brief The default interval in seconds at which a private address is refreshed. */ +#define BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S (900) /* 15 minutes. */ +/**@brief The maximum interval in seconds at which a private address can be refreshed. */ +#define BLE_GAP_MAX_PRIVATE_ADDR_CYCLE_INTERVAL_S (41400) /* 11 hours 30 minutes. */ + + +/** @brief BLE address length. */ +#define BLE_GAP_ADDR_LEN (6) + +/**@defgroup BLE_GAP_PRIVACY_MODES Privacy modes + * @{ */ +#define BLE_GAP_PRIVACY_MODE_OFF 0x00 /**< Device will send and accept its identity address for its own address. */ +#define BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY 0x01 /**< Device will send and accept only private addresses for its own address. */ +#define BLE_GAP_PRIVACY_MODE_NETWORK_PRIVACY 0x02 /**< Device will send and accept only private addresses for its own address, + and will not accept a peer using identity address as sender address when + the peer IRK is exchanged, non-zero and added to the identity list. */ +/**@} */ + +/** @brief Invalid power level. */ +#define BLE_GAP_POWER_LEVEL_INVALID 127 + +/** @brief Advertising set handle not set. */ +#define BLE_GAP_ADV_SET_HANDLE_NOT_SET (0xFF) + +/** @brief The default number of advertising sets. */ +#define BLE_GAP_ADV_SET_COUNT_DEFAULT (1) + +/** @brief The maximum number of advertising sets supported by this SoftDevice. */ +#define BLE_GAP_ADV_SET_COUNT_MAX (1) + +/**@defgroup BLE_GAP_ADV_SET_DATA_SIZES Advertising data sizes. + * @{ */ +#define BLE_GAP_ADV_SET_DATA_SIZE_MAX (31) /**< Maximum data length for an advertising set. */ +/**@}. */ + +/** @brief Set ID not available in advertising report. */ +#define BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE 0xFF + +/**@defgroup BLE_GAP_EVT_ADV_SET_TERMINATED_REASON GAP Advertising Set Terminated reasons + * @{ */ +#define BLE_GAP_EVT_ADV_SET_TERMINATED_REASON_TIMEOUT 0x01 /**< Timeout value reached. */ +#define BLE_GAP_EVT_ADV_SET_TERMINATED_REASON_LIMIT_REACHED 0x02 /**< @ref ble_gap_adv_params_t::max_adv_evts was reached. */ +/**@} */ + +/**@defgroup BLE_GAP_AD_TYPE_DEFINITIONS GAP Advertising and Scan Response Data format + * @note Found at https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm + * @{ */ +#define BLE_GAP_AD_TYPE_FLAGS 0x01 /**< Flags for discoverability. */ +#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE 0x02 /**< Partial list of 16 bit service UUIDs. */ +#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE 0x03 /**< Complete list of 16 bit service UUIDs. */ +#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE 0x04 /**< Partial list of 32 bit service UUIDs. */ +#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE 0x05 /**< Complete list of 32 bit service UUIDs. */ +#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE 0x06 /**< Partial list of 128 bit service UUIDs. */ +#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE 0x07 /**< Complete list of 128 bit service UUIDs. */ +#define BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME 0x08 /**< Short local device name. */ +#define BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME 0x09 /**< Complete local device name. */ +#define BLE_GAP_AD_TYPE_TX_POWER_LEVEL 0x0A /**< Transmit power level. */ +#define BLE_GAP_AD_TYPE_CLASS_OF_DEVICE 0x0D /**< Class of device. */ +#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C 0x0E /**< Simple Pairing Hash C. */ +#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R 0x0F /**< Simple Pairing Randomizer R. */ +#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_TK_VALUE 0x10 /**< Security Manager TK Value. */ +#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_OOB_FLAGS 0x11 /**< Security Manager Out Of Band Flags. */ +#define BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE 0x12 /**< Slave Connection Interval Range. */ +#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT 0x14 /**< List of 16-bit Service Solicitation UUIDs. */ +#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT 0x15 /**< List of 128-bit Service Solicitation UUIDs. */ +#define BLE_GAP_AD_TYPE_SERVICE_DATA 0x16 /**< Service Data - 16-bit UUID. */ +#define BLE_GAP_AD_TYPE_PUBLIC_TARGET_ADDRESS 0x17 /**< Public Target Address. */ +#define BLE_GAP_AD_TYPE_RANDOM_TARGET_ADDRESS 0x18 /**< Random Target Address. */ +#define BLE_GAP_AD_TYPE_APPEARANCE 0x19 /**< Appearance. */ +#define BLE_GAP_AD_TYPE_ADVERTISING_INTERVAL 0x1A /**< Advertising Interval. */ +#define BLE_GAP_AD_TYPE_LE_BLUETOOTH_DEVICE_ADDRESS 0x1B /**< LE Bluetooth Device Address. */ +#define BLE_GAP_AD_TYPE_LE_ROLE 0x1C /**< LE Role. */ +#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C256 0x1D /**< Simple Pairing Hash C-256. */ +#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R256 0x1E /**< Simple Pairing Randomizer R-256. */ +#define BLE_GAP_AD_TYPE_SERVICE_DATA_32BIT_UUID 0x20 /**< Service Data - 32-bit UUID. */ +#define BLE_GAP_AD_TYPE_SERVICE_DATA_128BIT_UUID 0x21 /**< Service Data - 128-bit UUID. */ +#define BLE_GAP_AD_TYPE_LESC_CONFIRMATION_VALUE 0x22 /**< LE Secure Connections Confirmation Value */ +#define BLE_GAP_AD_TYPE_LESC_RANDOM_VALUE 0x23 /**< LE Secure Connections Random Value */ +#define BLE_GAP_AD_TYPE_URI 0x24 /**< URI */ +#define BLE_GAP_AD_TYPE_3D_INFORMATION_DATA 0x3D /**< 3D Information Data. */ +#define BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA 0xFF /**< Manufacturer Specific Data. */ +/**@} */ + + +/**@defgroup BLE_GAP_ADV_FLAGS GAP Advertisement Flags + * @{ */ +#define BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE (0x01) /**< LE Limited Discoverable Mode. */ +#define BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE (0x02) /**< LE General Discoverable Mode. */ +#define BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED (0x04) /**< BR/EDR not supported. */ +#define BLE_GAP_ADV_FLAG_LE_BR_EDR_CONTROLLER (0x08) /**< Simultaneous LE and BR/EDR, Controller. */ +#define BLE_GAP_ADV_FLAG_LE_BR_EDR_HOST (0x10) /**< Simultaneous LE and BR/EDR, Host. */ +#define BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE (BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE Limited Discoverable Mode, BR/EDR not supported. */ +#define BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE (BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE General Discoverable Mode, BR/EDR not supported. */ +/**@} */ + + +/**@defgroup BLE_GAP_ADV_INTERVALS GAP Advertising interval max and min + * @{ */ +#define BLE_GAP_ADV_INTERVAL_MIN 0x000020 /**< Minimum Advertising interval in 625 us units, i.e. 20 ms. */ +#define BLE_GAP_ADV_INTERVAL_MAX 0x004000 /**< Maximum Advertising interval in 625 us units, i.e. 10.24 s. + @note Support for values above @ref BLE_GAP_ADV_INTERVAL_MAX + is experimental. Values above 0xFFFFFF, i.e 10,485.759375 s + are not supported. */ + /**@} */ + + +/**@defgroup BLE_GAP_SCAN_INTERVALS GAP Scan interval max and min + * @{ */ +#define BLE_GAP_SCAN_INTERVAL_MIN 0x0004 /**< Minimum Scan interval in 625 us units, i.e. 2.5 ms. */ +#define BLE_GAP_SCAN_INTERVAL_MAX 0xFFFF /**< Maximum Scan interval in 625 us units, i.e. 40,959.375 s. */ + /** @} */ + + +/**@defgroup BLE_GAP_SCAN_WINDOW GAP Scan window max and min + * @{ */ +#define BLE_GAP_SCAN_WINDOW_MIN 0x0004 /**< Minimum Scan window in 625 us units, i.e. 2.5 ms. */ +#define BLE_GAP_SCAN_WINDOW_MAX 0xFFFF /**< Maximum Scan window in 625 us units, i.e. 40,959.375 s. */ + /** @} */ + + +/**@defgroup BLE_GAP_SCAN_TIMEOUT GAP Scan timeout max and min + * @{ */ +#define BLE_GAP_SCAN_TIMEOUT_MIN 0x0001 /**< Minimum Scan timeout in 10 ms units, i.e 10 ms. */ +#define BLE_GAP_SCAN_TIMEOUT_UNLIMITED 0x0000 /**< Continue to scan forever. */ + /** @} */ + +/**@defgroup BLE_GAP_SCAN_BUFFER_SIZE GAP Minimum scanner buffer size + * + * Scan buffers are used for storing advertising data received from an advertiser. + * If ble_gap_scan_params_t::extended is set to 0, @ref BLE_GAP_SCAN_BUFFER_MIN is the minimum scan buffer length. + * else the minimum scan buffer size is @ref BLE_GAP_SCAN_BUFFER_EXTENDED_MIN. + * @{ */ +#define BLE_GAP_SCAN_BUFFER_MIN (31) /**< Minimum data length for an + advertising set. */ +#define BLE_GAP_SCAN_BUFFER_MAX (31) /**< Maximum data length for an + advertising set. */ +#define BLE_GAP_SCAN_BUFFER_EXTENDED_MIN (255) /**< Minimum data length for an + extended advertising set. */ +#define BLE_GAP_SCAN_BUFFER_EXTENDED_MAX (1650) /**< Maximum data length for an + extended advertising set. + @note Extended scanning is only + supported as an experimental + feature in this SoftDevice. + The scanner will only receive + advertising data up to 31 bytes. */ +/** @} */ + +/**@defgroup BLE_GAP_ADV_TYPES GAP Advertising types + * + * Advertising types defined in Bluetooth Core Specification v5.0, Vol 6, Part B, Section 4.4.2. + * + * The maximum advertising data length is defined by @ref BLE_GAP_ADV_SET_DATA_SIZE_MAX. + * Note that some of the advertising types do not support advertising data. Non-scannable types do not support + * scan response data. + * + * @{ */ +#define BLE_GAP_ADV_TYPE_CONNECTABLE_SCANNABLE_UNDIRECTED 0x01 /**< Connectable and scannable undirected + advertising events. */ +#define BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED_HIGH_DUTY_CYCLE 0x02 /**< Connectable non-scannable directed advertising + events. Advertising interval is less that 3.75 ms. + Use this type for fast reconnections. + @note Advertising data is not supported. */ +#define BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED 0x03 /**< Connectable non-scannable directed advertising + events. + @note Advertising data is not supported. */ +#define BLE_GAP_ADV_TYPE_NONCONNECTABLE_SCANNABLE_UNDIRECTED 0x04 /**< Non-connectable scannable undirected + advertising events. */ +#define BLE_GAP_ADV_TYPE_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED 0x05 /**< Non-connectable non-scannable undirected + advertising events. */ +#define BLE_GAP_ADV_TYPE_EXTENDED_CONNECTABLE_NONSCANNABLE_UNDIRECTED 0x06 /**< Connectable non-scannable undirected advertising + events using extended advertising PDUs. + @note Extended advertising types are only + supported as experimental features in this + SoftDevice. */ +#define BLE_GAP_ADV_TYPE_EXTENDED_CONNECTABLE_NONSCANNABLE_DIRECTED 0x07 /**< Connectable non-scannable directed advertising + events using extended advertising PDUs. + @note Extended advertising types are only + supported as experimental features in this + SoftDevice. */ +#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_SCANNABLE_UNDIRECTED 0x08 /**< Non-connectable scannable undirected advertising + events using extended advertising PDUs. + @note Only scan response data is supported. + @note Extended advertising types are only + supported as experimental features in this + SoftDevice. */ +#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_SCANNABLE_DIRECTED 0x09 /**< Non-connectable scannable directed advertising + events using extended advertising PDUs. + @note Only scan response data is supported. + @note Extended advertising types are only + supported as experimental features in this + SoftDevice. */ +#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED 0x0A /**< Non-connectable non-scannable undirected advertising + events using extended advertising PDUs. + @note Extended advertising types are only + supported as experimental features in this + SoftDevice. */ +#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_DIRECTED 0x0B /**< Non-connectable non-scannable directed advertising + events using extended advertising PDUs. + @note Extended advertising types are only + supported as experimental features in this + SoftDevice. */ +/**@} */ + +/**@defgroup BLE_GAP_ADV_FILTER_POLICIES GAP Advertising filter policies + * @{ */ +#define BLE_GAP_ADV_FP_ANY 0x00 /**< Allow scan requests and connect requests from any device. */ +#define BLE_GAP_ADV_FP_FILTER_SCANREQ 0x01 /**< Filter scan requests with whitelist. */ +#define BLE_GAP_ADV_FP_FILTER_CONNREQ 0x02 /**< Filter connect requests with whitelist. */ +#define BLE_GAP_ADV_FP_FILTER_BOTH 0x03 /**< Filter both scan and connect requests with whitelist. */ +/**@} */ + +/**@defgroup BLE_GAP_ADV_DATA_STATUS GAP Advertising data status + * @{ */ +#define BLE_GAP_ADV_DATA_STATUS_COMPLETE 0x00 /**< All data in the advertising event have been received. */ +#define BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA 0x01 /**< More data to be received. */ +#define BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_TRUNCATED 0x02 /**< Incomplete data. Buffer size insufficient to receive more. */ +#define BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MISSED 0x03 /**< Failed to receive the remaining data. */ +/**@} */ + +/**@defgroup BLE_GAP_SCAN_FILTER_POLICIES GAP Scanner filter policies + * @{ */ +#define BLE_GAP_SCAN_FP_ACCEPT_ALL 0x00 /**< Accept all advertising packets except directed advertising packets + not addressed to this device. */ +#define BLE_GAP_SCAN_FP_WHITELIST 0x01 /**< Accept advertising packets from devices in the whitelist except directed + packets not addressed to this device. */ +#define BLE_GAP_SCAN_FP_ALL_NOT_RESOLVED_DIRECTED 0x02 /**< Accept all advertising packets specified in @ref BLE_GAP_SCAN_FP_ACCEPT_ALL. + In addition, accept directed advertising packets, where the advertiser's + address is a resolvable private address that cannot be resolved. */ +#define BLE_GAP_SCAN_FP_WHITELIST_NOT_RESOLVED_DIRECTED 0x03 /**< Accept all advertising packets specified in @ref BLE_GAP_SCAN_FP_WHITELIST. + In addition, accept directed advertising packets, where the advertiser's + address is a resolvable private address that cannot be resolved. */ +/**@} */ + +/**@defgroup BLE_GAP_ADV_TIMEOUT_VALUES GAP Advertising timeout values in 10 ms units + * @{ */ +#define BLE_GAP_ADV_TIMEOUT_HIGH_DUTY_MAX (128) /**< Maximum high duty advertising time in 10 ms units. Corresponds to 1.28 s. */ +#define BLE_GAP_ADV_TIMEOUT_LIMITED_MAX (18000) /**< Maximum advertising time in 10 ms units corresponding to TGAP(lim_adv_timeout) = 180 s in limited discoverable mode. */ +#define BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED (0) /**< Unlimited advertising in general discoverable mode. + For high duty cycle advertising, this corresponds to @ref BLE_GAP_ADV_TIMEOUT_HIGH_DUTY_MAX. */ +/**@} */ + + +/**@defgroup BLE_GAP_DISC_MODES GAP Discovery modes + * @{ */ +#define BLE_GAP_DISC_MODE_NOT_DISCOVERABLE 0x00 /**< Not discoverable discovery Mode. */ +#define BLE_GAP_DISC_MODE_LIMITED 0x01 /**< Limited Discovery Mode. */ +#define BLE_GAP_DISC_MODE_GENERAL 0x02 /**< General Discovery Mode. */ +/**@} */ + + +/**@defgroup BLE_GAP_IO_CAPS GAP IO Capabilities + * @{ */ +#define BLE_GAP_IO_CAPS_DISPLAY_ONLY 0x00 /**< Display Only. */ +#define BLE_GAP_IO_CAPS_DISPLAY_YESNO 0x01 /**< Display and Yes/No entry. */ +#define BLE_GAP_IO_CAPS_KEYBOARD_ONLY 0x02 /**< Keyboard Only. */ +#define BLE_GAP_IO_CAPS_NONE 0x03 /**< No I/O capabilities. */ +#define BLE_GAP_IO_CAPS_KEYBOARD_DISPLAY 0x04 /**< Keyboard and Display. */ +/**@} */ + + +/**@defgroup BLE_GAP_AUTH_KEY_TYPES GAP Authentication Key Types + * @{ */ +#define BLE_GAP_AUTH_KEY_TYPE_NONE 0x00 /**< No key (may be used to reject). */ +#define BLE_GAP_AUTH_KEY_TYPE_PASSKEY 0x01 /**< 6-digit Passkey. */ +#define BLE_GAP_AUTH_KEY_TYPE_OOB 0x02 /**< Out Of Band data. */ +/**@} */ + + +/**@defgroup BLE_GAP_KP_NOT_TYPES GAP Keypress Notification Types + * @{ */ +#define BLE_GAP_KP_NOT_TYPE_PASSKEY_START 0x00 /**< Passkey entry started. */ +#define BLE_GAP_KP_NOT_TYPE_PASSKEY_DIGIT_IN 0x01 /**< Passkey digit entered. */ +#define BLE_GAP_KP_NOT_TYPE_PASSKEY_DIGIT_OUT 0x02 /**< Passkey digit erased. */ +#define BLE_GAP_KP_NOT_TYPE_PASSKEY_CLEAR 0x03 /**< Passkey cleared. */ +#define BLE_GAP_KP_NOT_TYPE_PASSKEY_END 0x04 /**< Passkey entry completed. */ +/**@} */ + + +/**@defgroup BLE_GAP_SEC_STATUS GAP Security status + * @{ */ +#define BLE_GAP_SEC_STATUS_SUCCESS 0x00 /**< Procedure completed with success. */ +#define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 /**< Procedure timed out. */ +#define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 /**< Invalid PDU received. */ +#define BLE_GAP_SEC_STATUS_RFU_RANGE1_BEGIN 0x03 /**< Reserved for Future Use range #1 begin. */ +#define BLE_GAP_SEC_STATUS_RFU_RANGE1_END 0x80 /**< Reserved for Future Use range #1 end. */ +#define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 /**< Passkey entry failed (user canceled or other). */ +#define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 /**< Out of Band Key not available. */ +#define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 /**< Authentication requirements not met. */ +#define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 /**< Confirm value failed. */ +#define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 /**< Pairing not supported. */ +#define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 /**< Encryption key size. */ +#define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 /**< Unsupported SMP command. */ +#define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 /**< Unspecified reason. */ +#define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 /**< Too little time elapsed since last attempt. */ +#define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A /**< Invalid parameters. */ +#define BLE_GAP_SEC_STATUS_DHKEY_FAILURE 0x8B /**< DHKey check failure. */ +#define BLE_GAP_SEC_STATUS_NUM_COMP_FAILURE 0x8C /**< Numeric Comparison failure. */ +#define BLE_GAP_SEC_STATUS_BR_EDR_IN_PROG 0x8D /**< BR/EDR pairing in progress. */ +#define BLE_GAP_SEC_STATUS_X_TRANS_KEY_DISALLOWED 0x8E /**< BR/EDR Link Key cannot be used for LE keys. */ +#define BLE_GAP_SEC_STATUS_RFU_RANGE2_BEGIN 0x8F /**< Reserved for Future Use range #2 begin. */ +#define BLE_GAP_SEC_STATUS_RFU_RANGE2_END 0xFF /**< Reserved for Future Use range #2 end. */ +/**@} */ + + +/**@defgroup BLE_GAP_SEC_STATUS_SOURCES GAP Security status sources + * @{ */ +#define BLE_GAP_SEC_STATUS_SOURCE_LOCAL 0x00 /**< Local failure. */ +#define BLE_GAP_SEC_STATUS_SOURCE_REMOTE 0x01 /**< Remote failure. */ +/**@} */ + + +/**@defgroup BLE_GAP_CP_LIMITS GAP Connection Parameters Limits + * @{ */ +#define BLE_GAP_CP_MIN_CONN_INTVL_NONE 0xFFFF /**< No new minimum connection interval specified in connect parameters. */ +#define BLE_GAP_CP_MIN_CONN_INTVL_MIN 0x0006 /**< Lowest minimum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */ +#define BLE_GAP_CP_MIN_CONN_INTVL_MAX 0x0C80 /**< Highest minimum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */ +#define BLE_GAP_CP_MAX_CONN_INTVL_NONE 0xFFFF /**< No new maximum connection interval specified in connect parameters. */ +#define BLE_GAP_CP_MAX_CONN_INTVL_MIN 0x0006 /**< Lowest maximum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */ +#define BLE_GAP_CP_MAX_CONN_INTVL_MAX 0x0C80 /**< Highest maximum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */ +#define BLE_GAP_CP_SLAVE_LATENCY_MAX 0x01F3 /**< Highest slave latency permitted, in connection events. */ +#define BLE_GAP_CP_CONN_SUP_TIMEOUT_NONE 0xFFFF /**< No new supervision timeout specified in connect parameters. */ +#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MIN 0x000A /**< Lowest supervision timeout permitted, in units of 10 ms, i.e. 100 ms. */ +#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MAX 0x0C80 /**< Highest supervision timeout permitted, in units of 10 ms, i.e. 32 s. */ +/**@} */ + + +/**@defgroup BLE_GAP_DEVNAME GAP device name defines. + * @{ */ +#define BLE_GAP_DEVNAME_DEFAULT "nRF5x" /**< Default device name value. */ +#define BLE_GAP_DEVNAME_DEFAULT_LEN 31 /**< Default number of octets in device name. */ +#define BLE_GAP_DEVNAME_MAX_LEN 248 /**< Maximum number of octets in device name. */ +/**@} */ + + +/**@brief Disable RSSI events for connections */ +#define BLE_GAP_RSSI_THRESHOLD_INVALID 0xFF + +/**@defgroup BLE_GAP_PHYS GAP PHYs + * @{ */ +#define BLE_GAP_PHY_AUTO 0x00 /**< Automatic PHY selection. Refer @ref sd_ble_gap_phy_update for more information.*/ +#define BLE_GAP_PHY_1MBPS 0x01 /**< 1 Mbps PHY. */ +#define BLE_GAP_PHY_2MBPS 0x02 /**< 2 Mbps PHY. */ +#define BLE_GAP_PHY_CODED 0x04 /**< Coded PHY. */ +#define BLE_GAP_PHY_NOT_SET 0xFF /**< PHY is not configured. */ + +/**@brief Supported PHYs in connections, for scanning, and for advertising. */ +#define BLE_GAP_PHYS_SUPPORTED (BLE_GAP_PHY_1MBPS | BLE_GAP_PHY_2MBPS) /**< All PHYs except @ref BLE_GAP_PHY_CODED are supported. */ + +/**@} */ + +/**@defgroup BLE_GAP_CONN_SEC_MODE_SET_MACROS GAP attribute security requirement setters + * + * See @ref ble_gap_conn_sec_mode_t. + * @{ */ +/**@brief Set sec_mode pointed to by ptr to have no access rights.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(ptr) do {(ptr)->sm = 0; (ptr)->lv = 0;} while(0) +/**@brief Set sec_mode pointed to by ptr to require no protection, open link.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_OPEN(ptr) do {(ptr)->sm = 1; (ptr)->lv = 1;} while(0) +/**@brief Set sec_mode pointed to by ptr to require encryption, but no MITM protection.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 2;} while(0) +/**@brief Set sec_mode pointed to by ptr to require encryption and MITM protection.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 3;} while(0) +/**@brief Set sec_mode pointed to by ptr to require LESC encryption and MITM protection.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_LESC_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 4;} while(0) +/**@brief Set sec_mode pointed to by ptr to require signing or encryption, no MITM protection needed.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 1;} while(0) +/**@brief Set sec_mode pointed to by ptr to require signing or encryption with MITM protection.*/ +#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 2;} while(0) +/**@} */ + + +/**@brief GAP Security Random Number Length. */ +#define BLE_GAP_SEC_RAND_LEN 8 + + +/**@brief GAP Security Key Length. */ +#define BLE_GAP_SEC_KEY_LEN 16 + + +/**@brief GAP LE Secure Connections Elliptic Curve Diffie-Hellman P-256 Public Key Length. */ +#define BLE_GAP_LESC_P256_PK_LEN 64 + + +/**@brief GAP LE Secure Connections Elliptic Curve Diffie-Hellman DHKey Length. */ +#define BLE_GAP_LESC_DHKEY_LEN 32 + + +/**@brief GAP Passkey Length. */ +#define BLE_GAP_PASSKEY_LEN 6 + + +/**@brief Maximum amount of addresses in the whitelist. */ +#define BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8) + + +/**@brief Maximum amount of identities in the device identities list. */ +#define BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT (8) + + +/**@brief Default connection count for a configuration. */ +#define BLE_GAP_CONN_COUNT_DEFAULT (1) + + +/**@defgroup BLE_GAP_EVENT_LENGTH GAP event length defines. + * @{ */ +#define BLE_GAP_EVENT_LENGTH_MIN (2) /**< Minimum event length, in 1.25 ms units. */ +#define BLE_GAP_EVENT_LENGTH_DEFAULT (3) /**< Default event length, in 1.25 ms units. */ +/**@} */ + + +/**@defgroup BLE_GAP_ROLE_COUNT GAP concurrent connection count defines. + * @{ */ +#define BLE_GAP_ROLE_COUNT_PERIPH_DEFAULT (1) /**< Default maximum number of connections concurrently acting as peripherals. */ +#define BLE_GAP_ROLE_COUNT_CENTRAL_DEFAULT (3) /**< Default maximum number of connections concurrently acting as centrals. */ +#define BLE_GAP_ROLE_COUNT_CENTRAL_SEC_DEFAULT (1) /**< Default number of SMP instances shared between all connections acting as centrals. */ +#define BLE_GAP_ROLE_COUNT_COMBINED_MAX (20) /**< Maximum supported number of concurrent connections in the peripheral and central roles combined. */ + +/**@} */ + +/**@brief Automatic data length parameter. */ +#define BLE_GAP_DATA_LENGTH_AUTO 0 + +/**@defgroup BLE_GAP_AUTH_PAYLOAD_TIMEOUT Authenticated payload timeout defines. + * @{ */ +#define BLE_GAP_AUTH_PAYLOAD_TIMEOUT_MAX (48000) /**< Maximum authenticated payload timeout in 10 ms units, i.e. 8 minutes. */ +#define BLE_GAP_AUTH_PAYLOAD_TIMEOUT_MIN (1) /**< Minimum authenticated payload timeout in 10 ms units, i.e. 10 ms. */ +/**@} */ + +/**@defgroup GAP_SEC_MODES GAP Security Modes + * @{ */ +#define BLE_GAP_SEC_MODE 0x00 /**< No key (may be used to reject). */ +/**@} */ + +/**@brief The total number of channels in Bluetooth Low Energy. */ +#define BLE_GAP_CHANNEL_COUNT (40) + +/**@defgroup BLE_GAP_QOS_CHANNEL_SURVEY_INTERVALS Quality of Service (QoS) Channel survey interval defines + * @{ */ +#define BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_CONTINUOUS (0) /**< Continuous channel survey. */ +#define BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_MIN_US (7500) /**< Minimum channel survey interval in microseconds (7.5 ms). */ +#define BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_MAX_US (4000000) /**< Maximum channel survey interval in microseconds (4 s). */ + /**@} */ + +/** @} */ + + +/**@addtogroup BLE_GAP_STRUCTURES Structures + * @{ */ + +/**@brief Advertising event properties. */ +typedef struct +{ + uint8_t type; /**< Advertising type. See @ref BLE_GAP_ADV_TYPES. */ + uint8_t anonymous : 1; /**< Omit advertiser's address from all PDUs. + @note Anonymous advertising is only available for + @ref BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED and + @ref BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_DIRECTED. */ + uint8_t include_tx_power : 1; /**< Include TxPower set by @ref sd_ble_gap_tx_power_set in the extended header + of the advertising PDU. + @note TxPower can only be added to the extended header when @ref type is an extended advertising type. */ +} ble_gap_adv_properties_t; + + +/**@brief Advertising report type. */ +typedef struct +{ + uint16_t connectable : 1; /**< Connectable advertising event type. */ + uint16_t scannable : 1; /**< Scannable advertising event type. */ + uint16_t directed : 1; /**< Directed advertising event type. */ + uint16_t scan_response : 1; /**< Received a scan response. */ + uint16_t extended_pdu : 1; /**< Received an extended advertising set. */ + uint16_t status : 2; /**< Data status. See @ref BLE_GAP_ADV_DATA_STATUS. */ + uint16_t reserved : 9; /**< Reserved for future use. */ +} ble_gap_adv_report_type_t; + +/**@brief Advertising Auxiliary Pointer. */ +typedef struct +{ + uint16_t aux_offset; /**< Time offset from the beginning of advertising packet to the auxiliary packet in 100 us units. */ + uint8_t aux_phy; /**< Indicates the PHY on which the auxiliary advertising packet is sent. See @ref BLE_GAP_PHYS. */ +} ble_gap_aux_pointer_t; + +/**@brief Bluetooth Low Energy address. */ +typedef struct +{ + uint8_t addr_id_peer : 1; /**< Only valid for peer addresses. + Reference to peer in device identities list (as set with @ref sd_ble_gap_device_identities_set) when peer is using privacy. */ + uint8_t addr_type : 7; /**< See @ref BLE_GAP_ADDR_TYPES. */ + uint8_t addr[BLE_GAP_ADDR_LEN]; /**< 48-bit address, LSB format. + addr is not used if addr_type is @ref BLE_GAP_ADDR_TYPE_ANONYMOUS. */ +} ble_gap_addr_t; + + +/**@brief GAP connection parameters. + * + * @note When ble_conn_params_t is received in an event, both min_conn_interval and + * max_conn_interval will be equal to the connection interval set by the central. + * + * @note If both conn_sup_timeout and max_conn_interval are specified, then the following constraint applies: + * conn_sup_timeout * 4 > (1 + slave_latency) * max_conn_interval + * that corresponds to the following Bluetooth Spec requirement: + * The Supervision_Timeout in milliseconds shall be larger than + * (1 + Conn_Latency) * Conn_Interval_Max * 2, where Conn_Interval_Max is given in milliseconds. + */ +typedef struct +{ + uint16_t min_conn_interval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/ + uint16_t max_conn_interval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/ + uint16_t slave_latency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/ + uint16_t conn_sup_timeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/ +} ble_gap_conn_params_t; + + +/**@brief GAP connection security modes. + * + * Security Mode 0 Level 0: No access permissions at all (this level is not defined by the Bluetooth Core specification).\n + * Security Mode 1 Level 1: No security is needed (aka open link).\n + * Security Mode 1 Level 2: Encrypted link required, MITM protection not necessary.\n + * Security Mode 1 Level 3: MITM protected encrypted link required.\n + * Security Mode 1 Level 4: LESC MITM protected encrypted link using a 128-bit strength encryption key required.\n + * Security Mode 2 Level 1: Signing or encryption required, MITM protection not necessary.\n + * Security Mode 2 Level 2: MITM protected signing required, unless link is MITM protected encrypted.\n + */ +typedef struct +{ + uint8_t sm : 4; /**< Security Mode (1 or 2), 0 for no permissions at all. */ + uint8_t lv : 4; /**< Level (1, 2, 3 or 4), 0 for no permissions at all. */ + +} ble_gap_conn_sec_mode_t; + + +/**@brief GAP connection security status.*/ +typedef struct +{ + ble_gap_conn_sec_mode_t sec_mode; /**< Currently active security mode for this connection.*/ + uint8_t encr_key_size; /**< Length of currently active encryption key, 7 to 16 octets (only applicable for bonding procedures). */ +} ble_gap_conn_sec_t; + +/**@brief Identity Resolving Key. */ +typedef struct +{ + uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Array containing IRK. */ +} ble_gap_irk_t; + + +/**@brief Channel mask (40 bits). + * Every channel is represented with a bit positioned as per channel index defined in Bluetooth Core Specification v5.0, + * Vol 6, Part B, Section 1.4.1. The LSB contained in array element 0 represents channel index 0, and bit 39 represents + * channel index 39. If a bit is set to 1, the channel is not used. + */ +typedef uint8_t ble_gap_ch_mask_t[5]; + + +/**@brief GAP advertising parameters. */ +typedef struct +{ + ble_gap_adv_properties_t properties; /**< The properties of the advertising events. */ + ble_gap_addr_t const *p_peer_addr; /**< Address of a known peer. + @note ble_gap_addr_t::addr_type cannot be + @ref BLE_GAP_ADDR_TYPE_ANONYMOUS. + - When privacy is enabled and the local device uses + @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE addresses, + the device identity list is searched for a matching entry. If + the local IRK for that device identity is set, the local IRK + for that device will be used to generate the advertiser address + field in the advertising packet. + - If @ref ble_gap_adv_properties_t::type is directed, this must be + set to the targeted scanner or initiator. If the peer address is + in the device identity list, the peer IRK for that device will be + used to generate @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE + target addresses used in the advertising event PDUs. */ + uint32_t interval; /**< Advertising interval in 625 us units. @sa BLE_GAP_ADV_INTERVALS. + @note If @ref ble_gap_adv_properties_t::type is set to + @ref BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED_HIGH_DUTY_CYCLE + advertising, this parameter is ignored. */ + uint16_t duration; /**< Advertising duration in 10 ms units. When timeout is reached, + an event of type @ref BLE_GAP_EVT_ADV_SET_TERMINATED is raised. + @sa BLE_GAP_ADV_TIMEOUT_VALUES. */ + uint8_t max_adv_evts; /**< Maximum advertising events that shall be sent prior to disabling + advertising. Setting the value to 0 disables the limitation. When + the count of advertising events specified by this parameter + (if not 0) is reached, advertising will be automatically stopped + and an event of type @ref BLE_GAP_EVT_ADV_SET_TERMINATED is raised + @note If @ref ble_gap_adv_properties_t::type is set to + @ref BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED_HIGH_DUTY_CYCLE, + this parameter is ignored. + @note Setting max_adv_evts to a values not equal to 0 is only supported + as an experimental feature in this SoftDevice. */ + ble_gap_ch_mask_t channel_mask; /**< Channel mask for primary and secondary advertising channels. + At least one of the primary channels, that is channel index 37-39, must be used. + Masking away secondary advertising channels is not supported. */ + uint8_t filter_policy; /**< Filter Policy. @sa BLE_GAP_ADV_FILTER_POLICIES. */ + uint8_t primary_phy; /**< Indicates the PHY on which the primary advertising channel packets + are transmitted. If set to @ref BLE_GAP_PHY_AUTO, @ref BLE_GAP_PHY_1MBPS + will be used. + The only supported value by this SoftDevice is @ref BLE_GAP_PHY_1MBPS. */ + uint8_t secondary_phy; /**< Indicates the PHY on which the secondary advertising channel packets + are transmitted. + If set to @ref BLE_GAP_PHY_AUTO, @ref BLE_GAP_PHY_1MBPS will be used. + Valid values are + @ref BLE_GAP_PHY_1MBPS and @ref BLE_GAP_PHY_2MBPS. @ref BLE_GAP_PHY_CODED + is not supported by this SoftDevice. + If @ref ble_gap_adv_properties_t::type is an extended advertising type + and connectable, this is the PHY that will be used to establish a + connection and send AUX_ADV_IND packets on. + @note This parameter will be ignored when + @ref ble_gap_adv_properties_t::type is not an extended advertising type. */ + uint8_t set_id:4; /**< The advertising set identifier distinguishes this advertising set from other + advertising sets transmitted by this and other devices. + @note This parameter will be ignored when + @ref ble_gap_adv_properties_t::type is not an extended advertising type. */ + uint8_t scan_req_notification:1; /**< Enable scan request notifications for this advertising set. When a + scan request is received and the scanner address is allowed + by the filter policy, @ref BLE_GAP_EVT_SCAN_REQ_REPORT is raised. + @note This parameter will be ignored when + @ref ble_gap_adv_properties_t::type is a non-scannable + advertising type. */ +} ble_gap_adv_params_t; + + +/**@brief GAP advertising data buffers. + * + * The application must provide the buffers for advertisement. The memory shall reside in application RAM, and + * shall never be modified while advertising. The data shall be kept alive until either: + * - @ref BLE_GAP_EVT_ADV_SET_TERMINATED is raised. + * - @ref BLE_GAP_EVT_CONNECTED is raised with @ref ble_gap_evt_connected_t::adv_handle set to the corresponding + * advertising handle. + * - Advertising is stopped. + * - Advertising data is changed. + * To update advertising data while advertising, provide new buffers to @ref sd_ble_gap_adv_set_configure. */ +typedef struct +{ + ble_data_t adv_data; /**< Advertising data. + @note + Advertising data can only be specified for a @ref ble_gap_adv_properties_t::type + that is allowed to contain advertising data. */ + ble_data_t scan_rsp_data; /**< Scan response data. + @note + Scan response data can only be specified for a @ref ble_gap_adv_properties_t::type + that is scannable. */ +} ble_gap_adv_data_t; + + +/**@brief GAP scanning parameters. */ +typedef struct +{ + uint8_t extended : 1; /**< If 1, the scanner will accept extended advertising packets. + If set to 0, the scanner will not receive advertising packets + on secondary advertising channels, and will not be able + to receive long advertising PDUs. + @note Extended scanning is only supported as an experimental feature in this + SoftDevice. */ + uint8_t report_incomplete_evts : 1; /**< If 1, events of type @ref ble_gap_evt_adv_report_t may have + @ref ble_gap_adv_report_type_t::status set to + @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. + This parameter is ignored when used with @ref sd_ble_gap_connect + @note This may be used to abort receiving more packets from an extended + advertising event, and is only available for extended + scanning, see @ref sd_ble_gap_scan_start. + @note This feature is not supported by this SoftDevice. */ + uint8_t active : 1; /**< If 1, perform active scanning by sending scan requests. + This parameter is ignored when used with @ref sd_ble_gap_connect. */ + uint8_t filter_policy : 2; /**< Scanning filter policy. @sa BLE_GAP_SCAN_FILTER_POLICIES. + @note Only @ref BLE_GAP_SCAN_FP_ACCEPT_ALL and + @ref BLE_GAP_SCAN_FP_WHITELIST are valid when used with + @ref sd_ble_gap_connect */ + uint8_t scan_phys; /**< Bitfield of PHYs to scan on. If set to @ref BLE_GAP_PHY_AUTO, + scan_phys will default to @ref BLE_GAP_PHY_1MBPS. + - If @ref ble_gap_scan_params_t::extended is set to 0, the only + supported PHY is @ref BLE_GAP_PHY_1MBPS. + - When used with @ref sd_ble_gap_scan_start, + the bitfield indicates the PHYs the scanner will use for scanning + on primary advertising channels. The scanner will accept + @ref BLE_GAP_PHYS_SUPPORTED as secondary advertising channel PHYs. + - When used with @ref sd_ble_gap_connect, the + bitfield indicates the PHYs on where a connection may be initiated. + If scan_phys contains @ref BLE_GAP_PHY_1MBPS and/or @ref BLE_GAP_PHY_2MBPS, + the primary scan PHY is @ref BLE_GAP_PHY_1MBPS. */ + uint16_t interval; /**< Scan interval in 625 us units. @sa BLE_GAP_SCAN_INTERVALS. */ + uint16_t window; /**< Scan window in 625 us units. @sa BLE_GAP_SCAN_WINDOW. */ + uint16_t timeout; /**< Scan timeout in 10 ms units. @sa BLE_GAP_SCAN_TIMEOUT. */ + ble_gap_ch_mask_t channel_mask; /**< Channel mask for primary and secondary advertising channels. + At least one of the primary channels, that is channel index 37-39, must be + set to 0. + Masking away secondary channels is not supported. */ +} ble_gap_scan_params_t; + + +/**@brief Privacy. + * + * The privacy feature provides a way for the device to avoid being tracked over a period of time. + * The privacy feature, when enabled, hides the local device identity and replaces it with a private address + * that is automatically refreshed at a specified interval. + * + * If a device still wants to be recognized by other peers, it needs to share it's Identity Resolving Key (IRK). + * With this key, a device can generate a random private address that can only be recognized by peers in possession of that key, + * and devices can establish connections without revealing their real identities. + * + * Both network privacy (@ref BLE_GAP_PRIVACY_MODE_NETWORK_PRIVACY) and device privacy (@ref BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY) + * are supported. + * + * @note If the device IRK is updated, the new IRK becomes the one to be distributed in all + * bonding procedures performed after @ref sd_ble_gap_privacy_set returns. + * The IRK distributed during bonding procedure is the device IRK that is active when @ref sd_ble_gap_sec_params_reply is called. + */ +typedef struct +{ + uint8_t privacy_mode; /**< Privacy mode, see @ref BLE_GAP_PRIVACY_MODES. Default is @ref BLE_GAP_PRIVACY_MODE_OFF. */ + uint8_t private_addr_type; /**< The private address type must be either @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE or @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE. */ + uint16_t private_addr_cycle_s; /**< Private address cycle interval in seconds. Providing an address cycle value of 0 will use the default value defined by @ref BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S. */ + ble_gap_irk_t *p_device_irk; /**< When used as input, pointer to IRK structure that will be used as the default IRK. If NULL, the device default IRK will be used. + When used as output, pointer to IRK structure where the current default IRK will be written to. If NULL, this argument is ignored. + By default, the default IRK is used to generate random private resolvable addresses for the local device unless instructed otherwise. */ +} ble_gap_privacy_params_t; + + +/**@brief PHY preferences for TX and RX + * @note tx_phys and rx_phys are bit fields. Multiple bits can be set in them to indicate multiple preferred PHYs for each direction. + * @code + * p_gap_phys->tx_phys = BLE_GAP_PHY_1MBPS | BLE_GAP_PHY_2MBPS; + * p_gap_phys->rx_phys = BLE_GAP_PHY_1MBPS | BLE_GAP_PHY_2MBPS; + * @endcode + * + */ +typedef struct +{ + uint8_t tx_phys; /**< Preferred transmit PHYs, see @ref BLE_GAP_PHYS. */ + uint8_t rx_phys; /**< Preferred receive PHYs, see @ref BLE_GAP_PHYS. */ +} ble_gap_phys_t; + +/** @brief Keys that can be exchanged during a bonding procedure. */ +typedef struct +{ + uint8_t enc : 1; /**< Long Term Key and Master Identification. */ + uint8_t id : 1; /**< Identity Resolving Key and Identity Address Information. */ + uint8_t sign : 1; /**< Connection Signature Resolving Key. */ + uint8_t link : 1; /**< Derive the Link Key from the LTK. */ +} ble_gap_sec_kdist_t; + + +/**@brief GAP security parameters. */ +typedef struct +{ + uint8_t bond : 1; /**< Perform bonding. */ + uint8_t mitm : 1; /**< Enable Man In The Middle protection. */ + uint8_t lesc : 1; /**< Enable LE Secure Connection pairing. */ + uint8_t keypress : 1; /**< Enable generation of keypress notifications. */ + uint8_t io_caps : 3; /**< IO capabilities, see @ref BLE_GAP_IO_CAPS. */ + uint8_t oob : 1; /**< The OOB data flag. + - In LE legacy pairing, this flag is set if a device has out of band authentication data. + The OOB method is used if both of the devices have out of band authentication data. + - In LE Secure Connections pairing, this flag is set if a device has the peer device's out of band authentication data. + The OOB method is used if at least one device has the peer device's OOB data available. */ + uint8_t min_key_size; /**< Minimum encryption key size in octets between 7 and 16. If 0 then not applicable in this instance. */ + uint8_t max_key_size; /**< Maximum encryption key size in octets between min_key_size and 16. */ + ble_gap_sec_kdist_t kdist_own; /**< Key distribution bitmap: keys that the local device will distribute. */ + ble_gap_sec_kdist_t kdist_peer; /**< Key distribution bitmap: keys that the remote device will distribute. */ +} ble_gap_sec_params_t; + + +/**@brief GAP Encryption Information. */ +typedef struct +{ + uint8_t ltk[BLE_GAP_SEC_KEY_LEN]; /**< Long Term Key. */ + uint8_t lesc : 1; /**< Key generated using LE Secure Connections. */ + uint8_t auth : 1; /**< Authenticated Key. */ + uint8_t ltk_len : 6; /**< LTK length in octets. */ +} ble_gap_enc_info_t; + + +/**@brief GAP Master Identification. */ +typedef struct +{ + uint16_t ediv; /**< Encrypted Diversifier. */ + uint8_t rand[BLE_GAP_SEC_RAND_LEN]; /**< Random Number. */ +} ble_gap_master_id_t; + + +/**@brief GAP Signing Information. */ +typedef struct +{ + uint8_t csrk[BLE_GAP_SEC_KEY_LEN]; /**< Connection Signature Resolving Key. */ +} ble_gap_sign_info_t; + + +/**@brief GAP LE Secure Connections P-256 Public Key. */ +typedef struct +{ + uint8_t pk[BLE_GAP_LESC_P256_PK_LEN]; /**< LE Secure Connections Elliptic Curve Diffie-Hellman P-256 Public Key. Stored in the standard SMP protocol format: {X,Y} both in little-endian. */ +} ble_gap_lesc_p256_pk_t; + + +/**@brief GAP LE Secure Connections DHKey. */ +typedef struct +{ + uint8_t key[BLE_GAP_LESC_DHKEY_LEN]; /**< LE Secure Connections Elliptic Curve Diffie-Hellman Key. Stored in little-endian. */ +} ble_gap_lesc_dhkey_t; + + +/**@brief GAP LE Secure Connections OOB data. */ +typedef struct +{ + ble_gap_addr_t addr; /**< Bluetooth address of the device. */ + uint8_t r[BLE_GAP_SEC_KEY_LEN]; /**< Random Number. */ + uint8_t c[BLE_GAP_SEC_KEY_LEN]; /**< Confirm Value. */ +} ble_gap_lesc_oob_data_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_CONNECTED. */ +typedef struct +{ + ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. If the peer_addr resolved: @ref ble_gap_addr_t::addr_id_peer is set to 1 + and the address is the device's identity address. */ + uint8_t role; /**< BLE role for this connection, see @ref BLE_GAP_ROLES */ + ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ + uint8_t adv_handle; /**< Advertising handle in which advertising has ended. + This variable is only set if role is set to @ref BLE_GAP_ROLE_PERIPH. */ + ble_gap_adv_data_t adv_data; /**< Advertising buffers corresponding to the terminated + advertising set. The advertising buffers provided in + @ref sd_ble_gap_adv_set_configure are now released. + This variable is only set if role is set to @ref BLE_GAP_ROLE_PERIPH. */ +} ble_gap_evt_connected_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_DISCONNECTED. */ +typedef struct +{ + uint8_t reason; /**< HCI error code, see @ref BLE_HCI_STATUS_CODES. */ +} ble_gap_evt_disconnected_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_CONN_PARAM_UPDATE. */ +typedef struct +{ + ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ +} ble_gap_evt_conn_param_update_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_PHY_UPDATE_REQUEST. */ +typedef struct +{ + ble_gap_phys_t peer_preferred_phys; /**< The PHYs the peer prefers to use. */ +} ble_gap_evt_phy_update_request_t; + +/**@brief Event Structure for @ref BLE_GAP_EVT_PHY_UPDATE. */ +typedef struct +{ + uint8_t status; /**< Status of the procedure, see @ref BLE_HCI_STATUS_CODES.*/ + uint8_t tx_phy; /**< TX PHY for this connection, see @ref BLE_GAP_PHYS. */ + uint8_t rx_phy; /**< RX PHY for this connection, see @ref BLE_GAP_PHYS. */ +} ble_gap_evt_phy_update_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST. */ +typedef struct +{ + ble_gap_sec_params_t peer_params; /**< Initiator Security Parameters. */ +} ble_gap_evt_sec_params_request_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_SEC_INFO_REQUEST. */ +typedef struct +{ + ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */ + ble_gap_master_id_t master_id; /**< Master Identification for LTK lookup. */ + uint8_t enc_info : 1; /**< If 1, Encryption Information required. */ + uint8_t id_info : 1; /**< If 1, Identity Information required. */ + uint8_t sign_info : 1; /**< If 1, Signing Information required. */ +} ble_gap_evt_sec_info_request_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_PASSKEY_DISPLAY. */ +typedef struct +{ + uint8_t passkey[BLE_GAP_PASSKEY_LEN]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */ + uint8_t match_request : 1; /**< If 1 requires the application to report the match using @ref sd_ble_gap_auth_key_reply + with either @ref BLE_GAP_AUTH_KEY_TYPE_NONE if there is no match or + @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY if there is a match. */ +} ble_gap_evt_passkey_display_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_KEY_PRESSED. */ +typedef struct +{ + uint8_t kp_not; /**< Keypress notification type, see @ref BLE_GAP_KP_NOT_TYPES. */ +} ble_gap_evt_key_pressed_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_AUTH_KEY_REQUEST. */ +typedef struct +{ + uint8_t key_type; /**< See @ref BLE_GAP_AUTH_KEY_TYPES. */ +} ble_gap_evt_auth_key_request_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST. */ +typedef struct +{ + ble_gap_lesc_p256_pk_t *p_pk_peer; /**< LE Secure Connections remote P-256 Public Key. This will point to the application-supplied memory + inside the keyset during the call to @ref sd_ble_gap_sec_params_reply. */ + uint8_t oobd_req :1; /**< LESC OOB data required. A call to @ref sd_ble_gap_lesc_oob_data_set is required to complete the procedure. */ +} ble_gap_evt_lesc_dhkey_request_t; + + +/**@brief Security levels supported. + * @note See Bluetooth Specification Version 4.2 Volume 3, Part C, Chapter 10, Section 10.2.1. +*/ +typedef struct +{ + uint8_t lv1 : 1; /**< If 1: Level 1 is supported. */ + uint8_t lv2 : 1; /**< If 1: Level 2 is supported. */ + uint8_t lv3 : 1; /**< If 1: Level 3 is supported. */ + uint8_t lv4 : 1; /**< If 1: Level 4 is supported. */ +} ble_gap_sec_levels_t; + + +/**@brief Encryption Key. */ +typedef struct +{ + ble_gap_enc_info_t enc_info; /**< Encryption Information. */ + ble_gap_master_id_t master_id; /**< Master Identification. */ +} ble_gap_enc_key_t; + + +/**@brief Identity Key. */ +typedef struct +{ + ble_gap_irk_t id_info; /**< Identity Resolving Key. */ + ble_gap_addr_t id_addr_info; /**< Identity Address. */ +} ble_gap_id_key_t; + + +/**@brief Security Keys. */ +typedef struct +{ + ble_gap_enc_key_t *p_enc_key; /**< Encryption Key, or NULL. */ + ble_gap_id_key_t *p_id_key; /**< Identity Key, or NULL. */ + ble_gap_sign_info_t *p_sign_key; /**< Signing Key, or NULL. */ + ble_gap_lesc_p256_pk_t *p_pk; /**< LE Secure Connections P-256 Public Key. When in debug mode the application must use the value defined + in the Core Bluetooth Specification v4.2 Vol.3, Part H, Section 2.3.5.6.1 */ +} ble_gap_sec_keys_t; + + +/**@brief Security key set for both local and peer keys. */ +typedef struct +{ + ble_gap_sec_keys_t keys_own; /**< Keys distributed by the local device. For LE Secure Connections the encryption key will be generated locally and will always be stored if bonding. */ + ble_gap_sec_keys_t keys_peer; /**< Keys distributed by the remote device. For LE Secure Connections, p_enc_key must always be NULL. */ +} ble_gap_sec_keyset_t; + + +/**@brief Data Length Update Procedure parameters. */ +typedef struct +{ + uint16_t max_tx_octets; /**< Maximum number of payload octets that a Controller supports for transmission of a single Link Layer Data Channel PDU. */ + uint16_t max_rx_octets; /**< Maximum number of payload octets that a Controller supports for reception of a single Link Layer Data Channel PDU. */ + uint16_t max_tx_time_us; /**< Maximum time, in microseconds, that a Controller supports for transmission of a single Link Layer Data Channel PDU. */ + uint16_t max_rx_time_us; /**< Maximum time, in microseconds, that a Controller supports for reception of a single Link Layer Data Channel PDU. */ +} ble_gap_data_length_params_t; + + +/**@brief Data Length Update Procedure local limitation. */ +typedef struct +{ + uint16_t tx_payload_limited_octets; /**< If > 0, the requested TX packet length is too long by this many octets. */ + uint16_t rx_payload_limited_octets; /**< If > 0, the requested RX packet length is too long by this many octets. */ + uint16_t tx_rx_time_limited_us; /**< If > 0, the requested combination of TX and RX packet lengths is too long by this many microseconds. */ +} ble_gap_data_length_limitation_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_AUTH_STATUS. */ +typedef struct +{ + uint8_t auth_status; /**< Authentication status, see @ref BLE_GAP_SEC_STATUS. */ + uint8_t error_src : 2; /**< On error, source that caused the failure, see @ref BLE_GAP_SEC_STATUS_SOURCES. */ + uint8_t bonded : 1; /**< Procedure resulted in a bond. */ + uint8_t lesc : 1; /**< Procedure resulted in a LE Secure Connection. */ + ble_gap_sec_levels_t sm1_levels; /**< Levels supported in Security Mode 1. */ + ble_gap_sec_levels_t sm2_levels; /**< Levels supported in Security Mode 2. */ + ble_gap_sec_kdist_t kdist_own; /**< Bitmap stating which keys were exchanged (distributed) by the local device. If bonding with LE Secure Connections, the enc bit will be always set. */ + ble_gap_sec_kdist_t kdist_peer; /**< Bitmap stating which keys were exchanged (distributed) by the remote device. If bonding with LE Secure Connections, the enc bit will never be set. */ +} ble_gap_evt_auth_status_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_CONN_SEC_UPDATE. */ +typedef struct +{ + ble_gap_conn_sec_t conn_sec; /**< Connection security level. */ +} ble_gap_evt_conn_sec_update_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_TIMEOUT. */ +typedef struct +{ + uint8_t src; /**< Source of timeout event, see @ref BLE_GAP_TIMEOUT_SOURCES. */ + union + { + ble_data_t adv_report_buffer; /**< If source is set to @ref BLE_GAP_TIMEOUT_SRC_SCAN, the released + scan buffer is contained in this field. */ + } params; /**< Event Parameters. */ +} ble_gap_evt_timeout_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_RSSI_CHANGED. */ +typedef struct +{ + int8_t rssi; /**< Received Signal Strength Indication in dBm. */ + uint8_t ch_index; /**< Data Channel Index on which the Signal Strength is measured (0-36). */ +} ble_gap_evt_rssi_changed_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_ADV_SET_TERMINATED */ +typedef struct +{ + uint8_t reason; /**< Reason for why the advertising set terminated. See + @ref BLE_GAP_EVT_ADV_SET_TERMINATED_REASON. */ + uint8_t adv_handle; /**< Advertising handle in which advertising has ended. */ + uint8_t num_completed_adv_events; /**< If @ref ble_gap_adv_params_t::max_adv_evts was not set to 0, + this field indicates the number of completed advertising events. */ + ble_gap_adv_data_t adv_data; /**< Advertising buffers corresponding to the terminated + advertising set. The advertising buffers provided in + @ref sd_ble_gap_adv_set_configure are now released. */ +} ble_gap_evt_adv_set_terminated_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_ADV_REPORT. + * + * @note If @ref ble_gap_adv_report_type_t::status is set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, + * not all fields in the advertising report may be available. + * + * @note When ble_gap_adv_report_type_t::status is not set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, + * scanning will be paused. To continue scanning, call @ref sd_ble_gap_scan_start. + */ +typedef struct +{ + ble_gap_adv_report_type_t type; /**< Advertising report type. See @ref ble_gap_adv_report_type_t. */ + ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. If the peer_addr is resolved: + @ref ble_gap_addr_t::addr_id_peer is set to 1 and the address is the + peer's identity address. */ + ble_gap_addr_t direct_addr; /**< Contains the target address of the advertising event if + @ref ble_gap_adv_report_type_t::directed is set to 1. If the + SoftDevice was able to resolve the address, + @ref ble_gap_addr_t::addr_id_peer is set to 1 and the direct_addr + contains the local identity address. If the target address of the + advertising event is @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE, + and the SoftDevice was unable to resolve it, the application may try + to resolve this address to find out if the advertising event was + directed to us. */ + uint8_t primary_phy; /**< Indicates the PHY on which the primary advertising packet was received on. + See @ref BLE_GAP_PHYS. */ + uint8_t secondary_phy; /**< Indicates the PHY on which the secondary advertising packet was received on. + See @ref BLE_GAP_PHYS. This field is to 0 if no packets where received on + a secondary advertising channel. */ + int8_t tx_power; /**< TX Power reported by the advertiser in the last packet header received. + This field is set to @ref BLE_GAP_POWER_LEVEL_INVALID if the + last received packet did not contain the Tx Power field. + @note TX Power is only included in extended advertising packets. */ + int8_t rssi; /**< Received Signal Strength Indication in dBm of the last packet received. */ + uint8_t ch_index; /**< Channel Index on which the last advertising packet is received (0-39). */ + uint8_t set_id; /**< Set ID of the received advertising data. Set ID is not present + if set to @ref BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE. */ + uint16_t data_id:12; /**< The advertising data ID of the received advertising data. Data ID + is not present if @ref ble_gap_evt_adv_report_t::set_id is set to + @ref BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE. */ + ble_data_t data; /**< Received advertising or scan response data. If + @ref ble_gap_adv_report_type_t::status is not set to + @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the data buffer provided + in @ref sd_ble_gap_scan_start is now released. */ + ble_gap_aux_pointer_t aux_pointer; /**< The offset and PHY of the next advertising packet in this extended advertising + event. @note This field is only set if @ref ble_gap_adv_report_type_t::status + is set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. */ +} ble_gap_evt_adv_report_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_SEC_REQUEST. */ +typedef struct +{ + uint8_t bond : 1; /**< Perform bonding. */ + uint8_t mitm : 1; /**< Man In The Middle protection requested. */ + uint8_t lesc : 1; /**< LE Secure Connections requested. */ + uint8_t keypress : 1; /**< Generation of keypress notifications requested. */ +} ble_gap_evt_sec_request_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST. */ +typedef struct +{ + ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ +} ble_gap_evt_conn_param_update_request_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_SCAN_REQ_REPORT. */ +typedef struct +{ + uint8_t adv_handle; /**< Advertising handle for the advertising set which received the Scan Request */ + int8_t rssi; /**< Received Signal Strength Indication in dBm. */ + ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. If the peer_addr resolved: @ref ble_gap_addr_t::addr_id_peer is set to 1 + and the address is the device's identity address. */ +} ble_gap_evt_scan_req_report_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST. */ +typedef struct +{ + ble_gap_data_length_params_t peer_params; /**< Peer data length parameters. */ +} ble_gap_evt_data_length_update_request_t; + +/**@brief Event structure for @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE. */ +typedef struct +{ + ble_gap_data_length_params_t effective_params; /**< The effective data length parameters. */ +} ble_gap_evt_data_length_update_t; + + +/**@brief Event structure for @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT. */ +typedef struct +{ + int8_t channel_energy[BLE_GAP_CHANNEL_COUNT]; /**< The measured energy on the Bluetooth Low Energy + channels, in dBm, indexed by Channel Index. + If no measurement is available for the given channel, channel_energy is set to + @ref BLE_GAP_POWER_LEVEL_INVALID. */ +} ble_gap_evt_qos_channel_survey_report_t; + +/**@brief GAP event structure. */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle on which event occurred. */ + union /**< union alternative identified by evt_id in enclosing struct. */ + { + ble_gap_evt_connected_t connected; /**< Connected Event Parameters. */ + ble_gap_evt_disconnected_t disconnected; /**< Disconnected Event Parameters. */ + ble_gap_evt_conn_param_update_t conn_param_update; /**< Connection Parameter Update Parameters. */ + ble_gap_evt_sec_params_request_t sec_params_request; /**< Security Parameters Request Event Parameters. */ + ble_gap_evt_sec_info_request_t sec_info_request; /**< Security Information Request Event Parameters. */ + ble_gap_evt_passkey_display_t passkey_display; /**< Passkey Display Event Parameters. */ + ble_gap_evt_key_pressed_t key_pressed; /**< Key Pressed Event Parameters. */ + ble_gap_evt_auth_key_request_t auth_key_request; /**< Authentication Key Request Event Parameters. */ + ble_gap_evt_lesc_dhkey_request_t lesc_dhkey_request; /**< LE Secure Connections DHKey calculation request. */ + ble_gap_evt_auth_status_t auth_status; /**< Authentication Status Event Parameters. */ + ble_gap_evt_conn_sec_update_t conn_sec_update; /**< Connection Security Update Event Parameters. */ + ble_gap_evt_timeout_t timeout; /**< Timeout Event Parameters. */ + ble_gap_evt_rssi_changed_t rssi_changed; /**< RSSI Event Parameters. */ + ble_gap_evt_adv_report_t adv_report; /**< Advertising Report Event Parameters. */ + ble_gap_evt_adv_set_terminated_t adv_set_terminated; /**< Advertising Set Terminated Event Parameters. */ + ble_gap_evt_sec_request_t sec_request; /**< Security Request Event Parameters. */ + ble_gap_evt_conn_param_update_request_t conn_param_update_request; /**< Connection Parameter Update Parameters. */ + ble_gap_evt_scan_req_report_t scan_req_report; /**< Scan Request Report Parameters. */ + ble_gap_evt_phy_update_request_t phy_update_request; /**< PHY Update Request Event Parameters. */ + ble_gap_evt_phy_update_t phy_update; /**< PHY Update Parameters. */ + ble_gap_evt_data_length_update_request_t data_length_update_request; /**< Data Length Update Request Event Parameters. */ + ble_gap_evt_data_length_update_t data_length_update; /**< Data Length Update Event Parameters. */ + ble_gap_evt_qos_channel_survey_report_t qos_channel_survey_report; /**< Quality of Service (QoS) Channel Survey Report Parameters. */ + } params; /**< Event Parameters. */ +} ble_gap_evt_t; + + +/** + * @brief BLE GAP connection configuration parameters, set with @ref sd_ble_cfg_set. + * + * @retval ::NRF_ERROR_CONN_COUNT The connection count for the connection configurations is zero. + * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: + * - The sum of conn_count for all connection configurations combined exceeds UINT8_MAX. + * - The event length is smaller than @ref BLE_GAP_EVENT_LENGTH_MIN. + */ +typedef struct +{ + uint8_t conn_count; /**< The number of concurrent connections the application can create with this configuration. + The default and minimum value is @ref BLE_GAP_CONN_COUNT_DEFAULT. */ + uint16_t event_length; /**< The time set aside for this connection on every connection interval in 1.25 ms units. + The default value is @ref BLE_GAP_EVENT_LENGTH_DEFAULT, the minimum value is @ref BLE_GAP_EVENT_LENGTH_MIN. + The event length and the connection interval are the primary parameters + for setting the throughput of a connection. + See the SoftDevice Specification for details on throughput. */ +} ble_gap_conn_cfg_t; + + +/** + * @brief Configuration of maximum concurrent connections in the different connected roles, set with + * @ref sd_ble_cfg_set. + * + * @retval ::NRF_ERROR_CONN_COUNT The sum of periph_role_count and central_role_count is too + * large. The maximum supported sum of concurrent connections is + * @ref BLE_GAP_ROLE_COUNT_COMBINED_MAX. + * @retval ::NRF_ERROR_INVALID_PARAM central_sec_count is larger than central_role_count. + * @retval ::NRF_ERROR_RESOURCES The adv_set_count is too large. The maximum + * supported advertising handles is + * @ref BLE_GAP_ADV_SET_COUNT_MAX. + */ +typedef struct +{ + uint8_t adv_set_count; /**< Maximum number of advertising sets. Default value is @ref BLE_GAP_ADV_SET_COUNT_DEFAULT. */ + uint8_t periph_role_count; /**< Maximum number of connections concurrently acting as a peripheral. Default value is @ref BLE_GAP_ROLE_COUNT_PERIPH_DEFAULT. */ + uint8_t central_role_count; /**< Maximum number of connections concurrently acting as a central. Default value is @ref BLE_GAP_ROLE_COUNT_CENTRAL_DEFAULT. */ + uint8_t central_sec_count; /**< Number of SMP instances shared between all connections acting as a central. Default value is @ref BLE_GAP_ROLE_COUNT_CENTRAL_SEC_DEFAULT. */ + uint8_t qos_channel_survey_role_available:1; /**< If set, the Quality of Service (QoS) channel survey module is available to the + application using @ref sd_ble_gap_qos_channel_survey_start. */ +} ble_gap_cfg_role_count_t; + + +/** + * @brief Device name and its properties, set with @ref sd_ble_cfg_set. + * + * @note If the device name is not configured, the default device name will be + * @ref BLE_GAP_DEVNAME_DEFAULT, the maximum device name length will be + * @ref BLE_GAP_DEVNAME_DEFAULT_LEN, vloc will be set to @ref BLE_GATTS_VLOC_STACK and the device name + * will have no write access. + * + * @note If @ref max_len is more than @ref BLE_GAP_DEVNAME_DEFAULT_LEN and vloc is set to @ref BLE_GATTS_VLOC_STACK, + * the attribute table size must be increased to have room for the longer device name (see + * @ref sd_ble_cfg_set and @ref ble_gatts_cfg_attr_tab_size_t). + * + * @note If vloc is @ref BLE_GATTS_VLOC_STACK : + * - p_value must point to non-volatile memory (flash) or be NULL. + * - If p_value is NULL, the device name will initially be empty. + * + * @note If vloc is @ref BLE_GATTS_VLOC_USER : + * - p_value cannot be NULL. + * - If the device name is writable, p_value must point to volatile memory (RAM). + * + * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: + * - Invalid device name location (vloc). + * - Invalid device name security mode. + * @retval ::NRF_ERROR_INVALID_LENGTH One or more of the following is true: + * - The device name length is invalid (must be between 0 and @ref BLE_GAP_DEVNAME_MAX_LEN). + * - The device name length is too long for the given Attribute Table. + * @retval ::NRF_ERROR_NOT_SUPPORTED Device name security mode is not supported. + */ +typedef struct +{ + ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ + uint8_t vloc:2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/ + uint8_t *p_value; /**< Pointer to where the value (device name) is stored or will be stored. */ + uint16_t current_len; /**< Current length in bytes of the memory pointed to by p_value.*/ + uint16_t max_len; /**< Maximum length in bytes of the memory pointed to by p_value.*/ +} ble_gap_cfg_device_name_t; + + +/**@brief Configuration structure for GAP configurations. */ +typedef union +{ + ble_gap_cfg_role_count_t role_count_cfg; /**< Role count configuration, cfg_id is @ref BLE_GAP_CFG_ROLE_COUNT. */ + ble_gap_cfg_device_name_t device_name_cfg; /**< Device name configuration, cfg_id is @ref BLE_GAP_CFG_DEVICE_NAME. */ +} ble_gap_cfg_t; + + +/**@brief Channel Map option. + * + * @details Used with @ref sd_ble_opt_get to get the current channel map + * or @ref sd_ble_opt_set to set a new channel map. When setting the + * channel map, it applies to all current and future connections. When getting the + * current channel map, it applies to a single connection and the connection handle + * must be supplied. + * + * @note Setting the channel map may take some time, depending on connection parameters. + * The time taken may be different for each connection and the get operation will + * return the previous channel map until the new one has taken effect. + * + * @note After setting the channel map, by spec it can not be set again until at least 1 s has passed. + * See Bluetooth Specification Version 4.1 Volume 2, Part E, Section 7.3.46. + * + * @retval ::NRF_SUCCESS Get or set successful. + * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: + * - Less then two bits in @ref ch_map are set. + * - Bits for primary advertising channels (37-39) are set. + * @retval ::NRF_ERROR_BUSY Channel map was set again before enough time had passed. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied for get. + * + */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle (only applicable for get) */ + uint8_t ch_map[5]; /**< Channel Map (37-bit). */ +} ble_gap_opt_ch_map_t; + + +/**@brief Local connection latency option. + * + * @details Local connection latency is a feature which enables the slave to improve + * current consumption by ignoring the slave latency set by the peer. The + * local connection latency can only be set to a multiple of the slave latency, + * and cannot be longer than half of the supervision timeout. + * + * @details Used with @ref sd_ble_opt_set to set the local connection latency. The + * @ref sd_ble_opt_get is not supported for this option, but the actual + * local connection latency (unless set to NULL) is set as a return parameter + * when setting the option. + * + * @note The latency set will be truncated down to the closest slave latency event + * multiple, or the nearest multiple before half of the supervision timeout. + * + * @note The local connection latency is disabled by default, and needs to be enabled for new + * connections and whenever the connection is updated. + * + * @retval ::NRF_SUCCESS Set successfully. + * @retval ::NRF_ERROR_NOT_SUPPORTED Get is not supported. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. + */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle */ + uint16_t requested_latency; /**< Requested local connection latency. */ + uint16_t * p_actual_latency; /**< Pointer to storage for the actual local connection latency (can be set to NULL to skip return value). */ +} ble_gap_opt_local_conn_latency_t; + +/**@brief Disable slave latency + * + * @details Used with @ref sd_ble_opt_set to temporarily disable slave latency of a peripheral connection + * (see @ref ble_gap_conn_params_t::slave_latency). And to re-enable it again. When disabled, the + * peripheral will ignore the slave_latency set by the central. + * + * @note Shall only be called on peripheral links. + * + * @retval ::NRF_SUCCESS Set successfully. + * @retval ::NRF_ERROR_NOT_SUPPORTED Get is not supported. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. + */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle */ + uint8_t disable : 1; /**< Set to 1 to disable slave latency. Set to 0 enable it again.*/ +} ble_gap_opt_slave_latency_disable_t; + +/**@brief Passkey Option. + * + * @details Structure containing the passkey to be used during pairing. This can be used with @ref + * sd_ble_opt_set to make the SoftDevice use a preprogrammed passkey for authentication + * instead of generating a random one. + * + * @note Repeated pairing attempts using the same preprogrammed passkey makes pairing vulnerable to MITM attacks. + * + * @note @ref sd_ble_opt_get is not supported for this option. + * + */ +typedef struct +{ + uint8_t const * p_passkey; /**< Pointer to 6-digit ASCII string (digit 0..9 only, no NULL termination) passkey to be used during pairing. If this is NULL, the SoftDevice will generate a random passkey if required.*/ +} ble_gap_opt_passkey_t; + + +/**@brief Compatibility mode 1 option. + * + * @details This can be used with @ref sd_ble_opt_set to enable and disable + * compatibility mode 1. Compatibility mode 1 is disabled by default. + * + * @note Compatibility mode 1 enables interoperability with devices that do not support a value of + * 0 for the WinOffset parameter in the Link Layer CONNECT_IND packet. This applies to a + * limited set of legacy peripheral devices from another vendor. Enabling this compatibility + * mode will only have an effect if the local device will act as a central device and + * initiate a connection to a peripheral device. In that case it may lead to the connection + * creation taking up to one connection interval longer to complete for all connections. + * + * @retval ::NRF_SUCCESS Set successfully. + * @retval ::NRF_ERROR_INVALID_STATE When connection creation is ongoing while mode 1 is set. + */ +typedef struct +{ + uint8_t enable : 1; /**< Enable compatibility mode 1.*/ +} ble_gap_opt_compat_mode_1_t; + + +/**@brief Authenticated payload timeout option. + * + * @details This can be used with @ref sd_ble_opt_set to change the Authenticated payload timeout to a value other + * than the default of @ref BLE_GAP_AUTH_PAYLOAD_TIMEOUT_MAX. + * + * @note The authenticated payload timeout event ::BLE_GAP_TIMEOUT_SRC_AUTH_PAYLOAD will be generated + * if auth_payload_timeout time has elapsed without receiving a packet with a valid MIC on an encrypted + * link. + * + * @note The LE ping procedure will be initiated before the timer expires to give the peer a chance + * to reset the timer. In addition the stack will try to prioritize running of LE ping over other + * activities to increase chances of finishing LE ping before timer expires. To avoid side-effects + * on other activities, it is recommended to use high timeout values. + * Recommended timeout > 2*(connInterval * (6 + connSlaveLatency)). + * + * @retval ::NRF_SUCCESS Set successfully. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. auth_payload_timeout was outside of allowed range. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. + */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle */ + uint16_t auth_payload_timeout; /**< Requested timeout in 10 ms unit, see @ref BLE_GAP_AUTH_PAYLOAD_TIMEOUT. */ +} ble_gap_opt_auth_payload_timeout_t; + +/**@brief Option structure for GAP options. */ +typedef union +{ + ble_gap_opt_ch_map_t ch_map; /**< Parameters for the Channel Map option. */ + ble_gap_opt_local_conn_latency_t local_conn_latency; /**< Parameters for the Local connection latency option */ + ble_gap_opt_passkey_t passkey; /**< Parameters for the Passkey option.*/ + ble_gap_opt_compat_mode_1_t compat_mode_1; /**< Parameters for the compatibility mode 1 option.*/ + ble_gap_opt_auth_payload_timeout_t auth_payload_timeout; /**< Parameters for the authenticated payload timeout option.*/ + ble_gap_opt_slave_latency_disable_t slave_latency_disable; /**< Parameters for the Disable slave latency option */ +} ble_gap_opt_t; +/**@} */ + + +/**@addtogroup BLE_GAP_FUNCTIONS Functions + * @{ */ + +/**@brief Set the local Bluetooth identity address. + * + * The local Bluetooth identity address is the address that identifies this device to other peers. + * The address type must be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC. + * + * @note The identity address cannot be changed while advertising, scanning or creating a connection. + * + * @note This address will be distributed to the peer during bonding. + * If the address changes, the address stored in the peer device will not be valid and the ability to + * reconnect using the old address will be lost. + * + * @note By default the SoftDevice will set an address of type @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC upon being + * enabled. The address is a random number populated during the IC manufacturing process and remains unchanged + * for the lifetime of each IC. + * + * @mscs + * @mmsc{@ref BLE_GAP_ADV_MSC} + * @endmscs + * + * @param[in] p_addr Pointer to address structure. + * + * @retval ::NRF_SUCCESS Address successfully set. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address. + * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. + * @retval ::NRF_ERROR_INVALID_STATE The identity address cannot be changed while advertising, + * scanning or creating a connection. + */ +SVCALL(SD_BLE_GAP_ADDR_SET, uint32_t, sd_ble_gap_addr_set(ble_gap_addr_t const *p_addr)); + + +/**@brief Get local Bluetooth identity address. + * + * @note This will always return the identity address irrespective of the privacy settings, + * i.e. the address type will always be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC. + * + * @param[out] p_addr Pointer to address structure to be filled in. + * + * @retval ::NRF_SUCCESS Address successfully retrieved. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. + */ +SVCALL(SD_BLE_GAP_ADDR_GET, uint32_t, sd_ble_gap_addr_get(ble_gap_addr_t *p_addr)); + + +/**@brief Set the active whitelist in the SoftDevice. + * + * @note Only one whitelist can be used at a time and the whitelist is shared between the BLE roles. + * The whitelist cannot be set if a BLE role is using the whitelist. + * + * @note If an address is resolved using the information in the device identity list, then the whitelist + * filter policy applies to the peer identity address and not the resolvable address sent on air. + * + * @mscs + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC} + * @endmscs + * + * @param[in] pp_wl_addrs Pointer to a whitelist of peer addresses, if NULL the whitelist will be cleared. + * @param[in] len Length of the whitelist, maximum @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. + * + * @retval ::NRF_SUCCESS The whitelist is successfully set/cleared. + * @retval ::NRF_ERROR_INVALID_ADDR The whitelist (or one of its entries) provided is invalid. + * @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE The whitelist is in use by a BLE role and cannot be set or cleared. + * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied. + * @retval ::NRF_ERROR_DATA_SIZE The given whitelist size is invalid (zero or too large); this can only return when + * pp_wl_addrs is not NULL. + */ +SVCALL(SD_BLE_GAP_WHITELIST_SET, uint32_t, sd_ble_gap_whitelist_set(ble_gap_addr_t const * const * pp_wl_addrs, uint8_t len)); + + +/**@brief Set device identity list. + * + * @note Only one device identity list can be used at a time and the list is shared between the BLE roles. + * The device identity list cannot be set if a BLE role is using the list. + * + * @param[in] pp_id_keys Pointer to an array of peer identity addresses and peer IRKs, if NULL the device identity list will be cleared. + * @param[in] pp_local_irks Pointer to an array of local IRKs. Each entry in the array maps to the entry in pp_id_keys at the same index. + * To fill in the list with the currently set device IRK for all peers, set to NULL. + * @param[in] len Length of the device identity list, maximum @ref BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT. + * + * @mscs + * @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS The device identity list successfully set/cleared. + * @retval ::NRF_ERROR_INVALID_ADDR The device identity list (or one of its entries) provided is invalid. + * This code may be returned if the local IRK list also has an invalid entry. + * @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_IN_USE The device identity list is in use and cannot be set or cleared. + * @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_DUPLICATE The device identity list contains multiple entries with the same identity address. + * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied. + * @retval ::NRF_ERROR_DATA_SIZE The given device identity list size invalid (zero or too large); this can + * only return when pp_id_keys is not NULL. + */ +SVCALL(SD_BLE_GAP_DEVICE_IDENTITIES_SET, uint32_t, sd_ble_gap_device_identities_set(ble_gap_id_key_t const * const * pp_id_keys, ble_gap_irk_t const * const * pp_local_irks, uint8_t len)); + + +/**@brief Set privacy settings. + * + * @note Privacy settings cannot be changed while advertising, scanning or creating a connection. + * + * @param[in] p_privacy_params Privacy settings. + * + * @mscs + * @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS Set successfully. + * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. + * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied. + * @retval ::NRF_ERROR_INVALID_ADDR The pointer to privacy settings is NULL or invalid. + * Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer. + * @retval ::NRF_ERROR_INVALID_PARAM Out of range parameters are provided. + * @retval ::NRF_ERROR_INVALID_STATE Privacy settings cannot be changed while advertising, scanning + * or creating a connection. + */ +SVCALL(SD_BLE_GAP_PRIVACY_SET, uint32_t, sd_ble_gap_privacy_set(ble_gap_privacy_params_t const *p_privacy_params)); + + +/**@brief Get privacy settings. + * + * @note ::ble_gap_privacy_params_t::p_device_irk must be initialized to NULL or a valid address before this function is called. + * If it is initialized to a valid address, the address pointed to will contain the current device IRK on return. + * + * @param[in,out] p_privacy_params Privacy settings. + * + * @retval ::NRF_SUCCESS Privacy settings read. + * @retval ::NRF_ERROR_INVALID_ADDR The pointer given for returning the privacy settings may be NULL or invalid. + * Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer. + */ +SVCALL(SD_BLE_GAP_PRIVACY_GET, uint32_t, sd_ble_gap_privacy_get(ble_gap_privacy_params_t *p_privacy_params)); + + +/**@brief Configure an advertising set. Set, clear or update advertising and scan response data. + * + * @note The format of the advertising data will be checked by this call to ensure interoperability. + * Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and + * duplicating the local name in the advertising data and scan response data. + * + * @note In order to update advertising data while advertising, new advertising buffers must be provided. + * + * @mscs + * @mmsc{@ref BLE_GAP_ADV_MSC} + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @endmscs + * + * @param[in,out] p_adv_handle Provide a pointer to a handle containing @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to configure + * a new advertising set. On success, a new handle is then returned through the pointer. + * Provide a pointer to an existing advertising handle to configure an existing advertising set. + * @param[in] p_adv_data Advertising data. If set to NULL, no advertising data will be used. See @ref ble_gap_adv_data_t. + * @param[in] p_adv_params Advertising parameters. When this function is used to update advertising data while advertising, + * this parameter must be NULL. See @ref ble_gap_adv_params_t. + * + * @retval ::NRF_SUCCESS Advertising set successfully configured. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied: + * - Invalid advertising data configuration specified. See @ref ble_gap_adv_data_t. + * - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t. + * - Use of whitelist requested but whitelist has not been set, + * see @ref sd_ble_gap_whitelist_set. + * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR ble_gap_adv_params_t::p_peer_addr is invalid. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * - It is invalid to provide non-NULL advertising set parameters while advertising. + * - It is invalid to provide the same data buffers while advertising. To update + * advertising data, provide new advertising buffers. + * @retval ::BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. Use @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to + * configure a new advertising handle. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied. + * @retval ::NRF_ERROR_INVALID_DATA Invalid data type(s) supplied. Check the advertising data format specification + * given in Bluetooth Specification Version 5.0, Volume 3, Part C, Chapter 11. + * @retval ::NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied. + * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported data length or advertising parameter configuration. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to configure a new advertising handle. Update an + * existing advertising handle instead. + * @retval ::BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied. + */ +SVCALL(SD_BLE_GAP_ADV_SET_CONFIGURE, uint32_t, sd_ble_gap_adv_set_configure(uint8_t *p_adv_handle, ble_gap_adv_data_t const *p_adv_data, ble_gap_adv_params_t const *p_adv_params)); + + +/**@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). + * + * @note Only one advertiser may be active at any time. + * + * @events + * @event{@ref BLE_GAP_EVT_CONNECTED, Generated after connection has been established through connectable advertising.} + * @event{@ref BLE_GAP_EVT_ADV_SET_TERMINATED, Advertising set has terminated.} + * @event{@ref BLE_GAP_EVT_SCAN_REQ_REPORT, A scan request was received.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_ADV_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC} + * @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC} + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @endmscs + * + * @param[in] adv_handle Advertising handle to advertise on, received from @ref sd_ble_gap_adv_set_configure. + * @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or + * @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration. For non-connectable + * advertising, this is ignored. + * + * @retval ::NRF_SUCCESS The BLE stack has started advertising. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. adv_handle is not configured or already advertising. + * @retval ::NRF_ERROR_CONN_COUNT The limit of available connections has been reached; connectable advertiser cannot be started. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found. Configure a new adveriting handle with @ref sd_ble_gap_adv_set_configure. + * @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied: + * - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t. + * - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set. + * @retval ::NRF_ERROR_RESOURCES Either: + * - adv_handle is configured with connectable advertising, but the event_length parameter + * associated with conn_cfg_tag is too small to be able to establish a connection on + * the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length. + * - Not enough BLE role slots available. + Stop one or more currently active roles (Central, Peripheral, Broadcaster or Observer) and try again. + * - p_adv_params is configured with connectable advertising, but the event_length parameter + * associated with conn_cfg_tag is too small to be able to establish a connection on + * the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length. + * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported PHYs supplied to the call. + */ +SVCALL(SD_BLE_GAP_ADV_START, uint32_t, sd_ble_gap_adv_start(uint8_t adv_handle, uint8_t conn_cfg_tag)); + + +/**@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). + * + * @mscs + * @mmsc{@ref BLE_GAP_ADV_MSC} + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @endmscs + * + * @param[in] adv_handle The advertising handle that should stop advertising. + * + * @retval ::NRF_SUCCESS The BLE stack has stopped advertising. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE Invalid advertising handle. + * @retval ::NRF_ERROR_INVALID_STATE The advertising handle is not advertising. + */ +SVCALL(SD_BLE_GAP_ADV_STOP, uint32_t, sd_ble_gap_adv_stop(uint8_t adv_handle)); + + + +/**@brief Update connection parameters. + * + * @details In the central role this will initiate a Link Layer connection parameter update procedure, + * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for + * the central to perform the procedure. In both cases, and regardless of success or failure, the application + * will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event. + * + * @details This function can be used as a central both to reply to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST or to start the procedure unrequested. + * + * @events + * @event{@ref BLE_GAP_EVT_CONN_PARAM_UPDATE, Result of the connection parameter update procedure.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_CPU_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} + * @mmsc{@ref BLE_GAP_MULTILINK_CPU_MSC} + * @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_CPU_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role, + * the parameters in the PPCP characteristic of the GAP service will be used instead. + * If NULL is provided on a central role and in response to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST, the peripheral request will be rejected + * + * @retval ::NRF_SUCCESS The Connection Update procedure has been started successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::NRF_ERROR_BUSY Procedure already in progress, wait for pending procedures to complete and retry. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. + */ +SVCALL(SD_BLE_GAP_CONN_PARAM_UPDATE, uint32_t, sd_ble_gap_conn_param_update(uint16_t conn_handle, ble_gap_conn_params_t const *p_conn_params)); + + +/**@brief Disconnect (GAP Link Termination). + * + * @details This call initiates the disconnection procedure, and its completion will be communicated to the application + * with a @ref BLE_GAP_EVT_DISCONNECTED event. + * + * @events + * @event{@ref BLE_GAP_EVT_DISCONNECTED, Generated when disconnection procedure is complete.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_CONN_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are @ref BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION and @ref BLE_HCI_CONN_INTERVAL_UNACCEPTABLE). + * + * @retval ::NRF_SUCCESS The disconnection procedure has been started successfully. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation (disconnection is already in progress). + */ +SVCALL(SD_BLE_GAP_DISCONNECT, uint32_t, sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code)); + + +/**@brief Set the radio's transmit power. + * + * @param[in] role The role to set the transmit power for, see @ref BLE_GAP_TX_POWER_ROLES for + * possible roles. + * @param[in] handle The handle parameter is interpreted depending on role: + * - If role is @ref BLE_GAP_TX_POWER_ROLE_CONN, this value is the specific connection handle. + * - If role is @ref BLE_GAP_TX_POWER_ROLE_ADV, the advertising set identified with the advertising handle, + * will use the specified transmit power, and include it in the advertising packet headers if + * @ref ble_gap_adv_properties_t::include_tx_power set. + * - For all other roles handle is ignored. + * @param[in] tx_power Radio transmit power in dBm (see note for accepted values). + * + * @note Supported tx_power values: -40dBm, -20dBm, -16dBm, -12dBm, -8dBm, -4dBm, 0dBm, +3dBm and +4dBm. + * @note The initiator will have the same transmit power as the scanner. + * @note When a connection is created it will inherit the transmit power from the initiator or + * advertiser leading to the connection. + * + * @retval ::NRF_SUCCESS Successfully changed the transmit power. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_TX_POWER_SET, uint32_t, sd_ble_gap_tx_power_set(uint8_t role, uint16_t handle, int8_t tx_power)); + + +/**@brief Set GAP Appearance value. + * + * @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES. + * + * @retval ::NRF_SUCCESS Appearance value set successfully. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + */ +SVCALL(SD_BLE_GAP_APPEARANCE_SET, uint32_t, sd_ble_gap_appearance_set(uint16_t appearance)); + + +/**@brief Get GAP Appearance value. + * + * @param[out] p_appearance Pointer to appearance (16-bit) to be filled in, see @ref BLE_APPEARANCES. + * + * @retval ::NRF_SUCCESS Appearance value retrieved successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + */ +SVCALL(SD_BLE_GAP_APPEARANCE_GET, uint32_t, sd_ble_gap_appearance_get(uint16_t *p_appearance)); + + +/**@brief Set GAP Peripheral Preferred Connection Parameters. + * + * @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters. + * + * @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + */ +SVCALL(SD_BLE_GAP_PPCP_SET, uint32_t, sd_ble_gap_ppcp_set(ble_gap_conn_params_t const *p_conn_params)); + + +/**@brief Get GAP Peripheral Preferred Connection Parameters. + * + * @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored. + * + * @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + */ +SVCALL(SD_BLE_GAP_PPCP_GET, uint32_t, sd_ble_gap_ppcp_get(ble_gap_conn_params_t *p_conn_params)); + + +/**@brief Set GAP device name. + * + * @note If the device name is located in application flash memory (see @ref ble_gap_cfg_device_name_t), + * it cannot be changed. Then @ref NRF_ERROR_FORBIDDEN will be returned. + * + * @param[in] p_write_perm Write permissions for the Device Name characteristic, see @ref ble_gap_conn_sec_mode_t. + * @param[in] p_dev_name Pointer to a UTF-8 encoded, non NULL-terminated string. + * @param[in] len Length of the UTF-8, non NULL-terminated string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN). + * + * @retval ::NRF_SUCCESS GAP device name and permissions set successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. + * @retval ::NRF_ERROR_FORBIDDEN Device name is not writable. + */ +SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const *p_write_perm, uint8_t const *p_dev_name, uint16_t len)); + + +/**@brief Get GAP device name. + * + * @note If the device name is longer than the size of the supplied buffer, + * p_len will return the complete device name length, + * and not the number of bytes actually returned in p_dev_name. + * The application may use this information to allocate a suitable buffer size. + * + * @param[out] p_dev_name Pointer to an empty buffer where the UTF-8 non NULL-terminated string will be placed. Set to NULL to obtain the complete device name length. + * @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output. + * + * @retval ::NRF_SUCCESS GAP device name retrieved successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. + */ +SVCALL(SD_BLE_GAP_DEVICE_NAME_GET, uint32_t, sd_ble_gap_device_name_get(uint8_t *p_dev_name, uint16_t *p_len)); + + +/**@brief Initiate the GAP Authentication procedure. + * + * @details In the central role, this function will send an SMP Pairing Request (or an SMP Pairing Failed if rejected), + * otherwise in the peripheral role, an SMP Security Request will be sent. + * + * @events + * @event{Depending on the security parameters set and the packet exchanges with the peer\, the following events may be generated:} + * @event{@ref BLE_GAP_EVT_SEC_PARAMS_REQUEST} + * @event{@ref BLE_GAP_EVT_SEC_INFO_REQUEST} + * @event{@ref BLE_GAP_EVT_PASSKEY_DISPLAY} + * @event{@ref BLE_GAP_EVT_KEY_PRESSED} + * @event{@ref BLE_GAP_EVT_AUTH_KEY_REQUEST} + * @event{@ref BLE_GAP_EVT_LESC_DHKEY_REQUEST} + * @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE} + * @event{@ref BLE_GAP_EVT_AUTH_STATUS} + * @event{@ref BLE_GAP_EVT_TIMEOUT} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_SEC_REQ_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing or bonding procedure. + * In the peripheral role, only the bond, mitm, lesc and keypress fields of this structure are used. + * In the central role, this pointer may be NULL to reject a Security Request. + * + * @retval ::NRF_SUCCESS Successfully initiated authentication procedure. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::NRF_ERROR_NO_MEM The maximum number of authentication procedures that can run in parallel for the given role is reached. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported. + * @retval ::NRF_ERROR_TIMEOUT A SMP timeout has occurred, and further SMP operations on this link is prohibited. + */ +SVCALL(SD_BLE_GAP_AUTHENTICATE, uint32_t, sd_ble_gap_authenticate(uint16_t conn_handle, ble_gap_sec_params_t const *p_sec_params)); + + +/**@brief Reply with GAP security parameters. + * + * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. + * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. + * + * @events + * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_BONDING_JW_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_PERIPH_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_CONFIRM_FAIL_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_KS_TOO_SMALL_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_APP_ERROR_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_REMOTE_PAIRING_FAIL_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_TIMEOUT_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS. + * @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure. In the central role this must be set to NULL, as the parameters have + * already been provided during a previous call to @ref sd_ble_gap_authenticate. + * @param[in,out] p_sec_keyset Pointer to a @ref ble_gap_sec_keyset_t security keyset structure. Any keys generated and/or distributed as a result of the ongoing security procedure + * will be stored into the memory referenced by the pointers inside this structure. The keys will be stored and available to the application + * upon reception of a @ref BLE_GAP_EVT_AUTH_STATUS event. + * Note that the SoftDevice expects the application to provide memory for storing the + * peer's keys. So it must be ensured that the relevant pointers inside this structure are not NULL. The pointers to the local key + * can, however, be NULL, in which case, the local key data will not be available to the application upon reception of the + * @ref BLE_GAP_EVT_AUTH_STATUS event. + * + * @retval ::NRF_SUCCESS Successfully accepted security parameter from the application. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported. + */ +SVCALL(SD_BLE_GAP_SEC_PARAMS_REPLY, uint32_t, sd_ble_gap_sec_params_reply(uint16_t conn_handle, uint8_t sec_status, ble_gap_sec_params_t const *p_sec_params, ble_gap_sec_keyset_t const *p_sec_keyset)); + + +/**@brief Reply with an authentication key. + * + * @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST or a @ref BLE_GAP_EVT_PASSKEY_DISPLAY, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. + * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. + * + * @events + * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES. + * @param[in] p_key If key type is @ref BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL. + * If key type is @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination) + * or NULL when confirming LE Secure Connections Numeric Comparison. + * If key type is @ref BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in little-endian format. + * + * @retval ::NRF_SUCCESS Authentication key successfully set. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_AUTH_KEY_REPLY, uint32_t, sd_ble_gap_auth_key_reply(uint16_t conn_handle, uint8_t key_type, uint8_t const *p_key)); + + +/**@brief Reply with an LE Secure connections DHKey. + * + * @details This function is only used to reply to a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. + * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. + * + * @events + * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_dhkey LE Secure Connections DHKey. + * + * @retval ::NRF_SUCCESS DHKey successfully set. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_LESC_DHKEY_REPLY, uint32_t, sd_ble_gap_lesc_dhkey_reply(uint16_t conn_handle, ble_gap_lesc_dhkey_t const *p_dhkey)); + + +/**@brief Notify the peer of a local keypress. + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] kp_not See @ref BLE_GAP_KP_NOT_TYPES. + * + * @retval ::NRF_SUCCESS Keypress notification successfully queued for transmission. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either not entering a passkey or keypresses have not been enabled by both peers. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_BUSY The BLE stack is busy. Retry at later time. + */ +SVCALL(SD_BLE_GAP_KEYPRESS_NOTIFY, uint32_t, sd_ble_gap_keypress_notify(uint16_t conn_handle, uint8_t kp_not)); + + +/**@brief Generate a set of OOB data to send to a peer out of band. + * + * @note The @ref ble_gap_addr_t included in the OOB data returned will be the currently active one (or, if a connection has already been established, + * the one used during connection setup). The application may manually overwrite it with an updated value. + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. Can be @ref BLE_CONN_HANDLE_INVALID if a BLE connection has not been established yet. + * @param[in] p_pk_own LE Secure Connections local P-256 Public Key. + * @param[out] p_oobd_own The OOB data to be sent out of band to a peer. + * + * @retval ::NRF_SUCCESS OOB data successfully generated. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_LESC_OOB_DATA_GET, uint32_t, sd_ble_gap_lesc_oob_data_get(uint16_t conn_handle, ble_gap_lesc_p256_pk_t const *p_pk_own, ble_gap_lesc_oob_data_t *p_oobd_own)); + +/**@brief Provide the OOB data sent/received out of band. + * + * @note An authentication procedure with OOB selected as an algorithm must be in progress when calling this function. + * @note A @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event with the oobd_req set to 1 must have been received prior to calling this function. + * + * @events + * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_oobd_own The OOB data sent out of band to a peer or NULL if the peer has not received OOB data. + * Must correspond to @ref ble_gap_sec_params_t::oob flag in @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST. + * @param[in] p_oobd_peer The OOB data received out of band from a peer or NULL if none received. + * Must correspond to @ref ble_gap_sec_params_t::oob flag in @ref sd_ble_gap_authenticate in the central role + * or @ref sd_ble_gap_sec_params_reply in the peripheral role. + * + * @retval ::NRF_SUCCESS OOB data accepted. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_LESC_OOB_DATA_SET, uint32_t, sd_ble_gap_lesc_oob_data_set(uint16_t conn_handle, ble_gap_lesc_oob_data_t const *p_oobd_own, ble_gap_lesc_oob_data_t const *p_oobd_peer)); + + +/**@brief Initiate GAP Encryption procedure. + * + * @details In the central role, this function will initiate the encryption procedure using the encryption information provided. + * + * @events + * @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE, The connection security has been updated.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_ENC_MSC} + * @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_master_id Pointer to a @ref ble_gap_master_id_t master identification structure. + * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. + * + * @retval ::NRF_SUCCESS Successfully initiated authentication procedure. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::BLE_ERROR_INVALID_ROLE Operation is not supported in the Peripheral role. + * @retval ::NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, wait for pending procedures to complete and retry. + */ +SVCALL(SD_BLE_GAP_ENCRYPT, uint32_t, sd_ble_gap_encrypt(uint16_t conn_handle, ble_gap_master_id_t const *p_master_id, ble_gap_enc_info_t const *p_enc_info)); + + +/**@brief Reply with GAP security information. + * + * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in @ref NRF_ERROR_INVALID_STATE. + * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. + * @note Data signing is not yet supported, and p_sign_info must therefore be NULL. + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_ENC_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available. + * @param[in] p_id_info Pointer to a @ref ble_gap_irk_t identity information structure. May be NULL to signal none is available. + * @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available. + * + * @retval ::NRF_SUCCESS Successfully accepted security information. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_SEC_INFO_REPLY, uint32_t, sd_ble_gap_sec_info_reply(uint16_t conn_handle, ble_gap_enc_info_t const *p_enc_info, ble_gap_irk_t const *p_id_info, ble_gap_sign_info_t const *p_sign_info)); + + +/**@brief Get the current connection security. + * + * @param[in] conn_handle Connection handle. + * @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in. + * + * @retval ::NRF_SUCCESS Current connection security successfully retrieved. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_CONN_SEC_GET, uint32_t, sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t *p_conn_sec)); + + +/**@brief Start reporting the received signal strength to the application. + * + * A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called. + * + * @events + * @event{@ref BLE_GAP_EVT_RSSI_CHANGED, New RSSI data available. How often the event is generated is + * dependent on the settings of the threshold_dbm + * and skip_count input parameters.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} + * @mmsc{@ref BLE_GAP_RSSI_FILT_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] threshold_dbm Minimum change in dBm before triggering the @ref BLE_GAP_EVT_RSSI_CHANGED event. Events are disabled if threshold_dbm equals @ref BLE_GAP_RSSI_THRESHOLD_INVALID. + * @param[in] skip_count Number of RSSI samples with a change of threshold_dbm or more before sending a new @ref BLE_GAP_EVT_RSSI_CHANGED event. + * + * @retval ::NRF_SUCCESS Successfully activated RSSI reporting. + * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is already ongoing. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_RSSI_START, uint32_t, sd_ble_gap_rssi_start(uint16_t conn_handle, uint8_t threshold_dbm, uint8_t skip_count)); + + +/**@brief Stop reporting the received signal strength. + * + * @note An RSSI change detected before the call but not yet received by the application + * may be reported after @ref sd_ble_gap_rssi_stop has been called. + * + * @mscs + * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} + * @mmsc{@ref BLE_GAP_RSSI_FILT_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * + * @retval ::NRF_SUCCESS Successfully deactivated RSSI reporting. + * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + */ +SVCALL(SD_BLE_GAP_RSSI_STOP, uint32_t, sd_ble_gap_rssi_stop(uint16_t conn_handle)); + + +/**@brief Get the received signal strength for the last connection event. + * + * @ref sd_ble_gap_rssi_start must be called to start reporting RSSI before using this function. @ref NRF_ERROR_NOT_FOUND + * will be returned until RSSI was sampled for the first time after calling @ref sd_ble_gap_rssi_start. + * @mscs + * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[out] p_rssi Pointer to the location where the RSSI measurement shall be stored. + * @param[out] p_ch_index Pointer to the location where Channel Index for the RSSI measurement shall be stored. + * + * @retval ::NRF_SUCCESS Successfully read the RSSI. + * @retval ::NRF_ERROR_NOT_FOUND No sample is available. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing. + */ +SVCALL(SD_BLE_GAP_RSSI_GET, uint32_t, sd_ble_gap_rssi_get(uint16_t conn_handle, int8_t *p_rssi, uint8_t *p_ch_index)); + + +/**@brief Start or continue scanning (GAP Discovery procedure, Observer Procedure). + * + * @note A call to this function will require the application to keep the memory pointed by + * p_adv_report_buffer alive until the buffer is released. The buffer is released when the scanner is stopped + * or when this function is called with another buffer. + * + * @note The scanner will automatically stop in the following cases: + * - @ref sd_ble_gap_scan_stop is called. + * - @ref sd_ble_gap_connect is called. + * - A @ref BLE_GAP_EVT_TIMEOUT with source set to @ref BLE_GAP_TIMEOUT_SRC_SCAN is received. + * - When a @ref BLE_GAP_EVT_ADV_REPORT event is received and @ref ble_gap_adv_report_type_t::status is not set to + * @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. In this case scanning is only paused to let the application + * access received data. The application must call this function to continue scanning, or call @ref sd_ble_gap_scan_stop + * to stop scanning. + * + * @note If a @ref BLE_GAP_EVT_ADV_REPORT event is received with @ref ble_gap_adv_report_type_t::status set to + * @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the scanner will continue scanning, and the application will + * receive more reports from this advertising event. The following reports will include the old and new received data. + * The application can stop the scanner from receiving more packets from this advertising event by calling this function. + * This might be useful when receiving data from extended advertising events where @ref ble_gap_evt_adv_report_t::aux_pointer + * is large. + * + * @events + * @event{@ref BLE_GAP_EVT_ADV_REPORT, An advertising or scan response packet has been received.} + * @event{@ref BLE_GAP_EVT_TIMEOUT, Scanner has timed out.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_SCAN_MSC} + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @endmscs + * + * @param[in] p_scan_params Pointer to scan parameters structure. When this function is used to continue + * scanning, this parameter must be NULL. + * @param[in] p_adv_report_buffer Pointer to buffer used to store incoming advertising data. + * The memory pointed to should be kept alive until the scanning is stopped. + * See @ref BLE_GAP_SCAN_BUFFER_SIZE for minimum and maximum buffer size. + * If the scanner receives advertising data larger than can be stored in the buffer, + * a @ref BLE_GAP_EVT_ADV_REPORT will be raised with @ref ble_gap_adv_report_type_t::status + * set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_TRUNCATED. + * + * @retval ::NRF_SUCCESS Successfully initiated scanning procedure. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: + * - Scanning is already ongoing and p_scan_params was not NULL + * - Scanning is not running and p_scan_params was NULL. + * - The scanner has timed out when this function is called to continue scanning. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. See @ref ble_gap_scan_params_t. + * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported parameters supplied. See @ref ble_gap_scan_params_t. + * @retval ::NRF_ERROR_INVALID_LENGTH The provided buffer length is invalid. See @ref BLE_GAP_SCAN_BUFFER_MIN. + * @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available. + * Stop one or more currently active roles (Central, Peripheral or Broadcaster) and try again + * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported PHYs supplied to the call. + */ +SVCALL(SD_BLE_GAP_SCAN_START, uint32_t, sd_ble_gap_scan_start(ble_gap_scan_params_t const *p_scan_params, ble_data_t const * p_adv_report_buffer)); + + +/**@brief Stop scanning (GAP Discovery procedure, Observer Procedure). + * + * @note The buffer provided in @ref sd_ble_gap_scan_start is released. + * + * @mscs + * @mmsc{@ref BLE_GAP_SCAN_MSC} + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS Successfully stopped scanning procedure. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Not in the scanning state. + */ +SVCALL(SD_BLE_GAP_SCAN_STOP, uint32_t, sd_ble_gap_scan_stop(void)); + + +/**@brief Create a connection (GAP Link Establishment). + * + * @note If a scanning procedure is currently in progress it will be automatically stopped when calling this function. + * The scanning procedure will be stopped even if the function returns an error. + * + * @mscs + * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC} + * @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC} + * @endmscs + * + * @param[in] p_peer_addr Pointer to peer identity address. If @ref ble_gap_scan_params_t::filter_policy is set to use + * whitelist, then p_peer_addr is ignored. + * @param[in] p_scan_params Pointer to scan parameters structure. + * @param[in] p_conn_params Pointer to desired connection parameters. + * @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or + * @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration. + * + * @retval ::NRF_SUCCESS Successfully initiated connection procedure. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid parameter(s) pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * - Invalid parameter(s) in p_scan_params or p_conn_params. + * - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set. + * - Peer address was not present in the device identity list, see @ref sd_ble_gap_device_identities_set. + * @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found. + * @retval ::NRF_ERROR_INVALID_STATE The SoftDevice is in an invalid state to perform this operation. This may be due to an + * existing locally initiated connect procedure, which must complete before initiating again. + * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Peer address. + * @retval ::NRF_ERROR_CONN_COUNT The limit of available connections has been reached. + * @retval ::NRF_ERROR_RESOURCES Either: + * - Not enough BLE role slots available. + * Stop one or more currently active roles (Central, Peripheral or Observer) and try again. + * - The event_length parameter associated with conn_cfg_tag is too small to be able to + * establish a connection on the selected @ref ble_gap_scan_params_t::scan_phys. + * Use @ref sd_ble_cfg_set to increase the event length. + * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported PHYs supplied to the call. + */ +SVCALL(SD_BLE_GAP_CONNECT, uint32_t, sd_ble_gap_connect(ble_gap_addr_t const *p_peer_addr, ble_gap_scan_params_t const *p_scan_params, ble_gap_conn_params_t const *p_conn_params, uint8_t conn_cfg_tag)); + + +/**@brief Cancel a connection establishment. + * + * @mscs + * @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS Successfully canceled an ongoing connection procedure. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + */ +SVCALL(SD_BLE_GAP_CONNECT_CANCEL, uint32_t, sd_ble_gap_connect_cancel(void)); + + +/**@brief Initiate or respond to a PHY Update Procedure + * + * @details This function is used to initiate or respond to a PHY Update Procedure. It will always + * generate a @ref BLE_GAP_EVT_PHY_UPDATE event if successfully executed. + * If this function is used to initiate a PHY Update procedure and the only option + * provided in @ref ble_gap_phys_t::tx_phys and @ref ble_gap_phys_t::rx_phys is the + * currently active PHYs in the respective directions, the SoftDevice will generate a + * @ref BLE_GAP_EVT_PHY_UPDATE with the current PHYs set and will not initiate the + * procedure in the Link Layer. + * + * If @ref ble_gap_phys_t::tx_phys or @ref ble_gap_phys_t::rx_phys is @ref BLE_GAP_PHY_AUTO, + * then the stack will select PHYs based on the peer's PHY preferences and the local link + * configuration. The PHY Update procedure will for this case result in a PHY combination + * that respects the time constraints configured with @ref sd_ble_cfg_set and the current + * link layer data length. + * + * When acting as a central, the SoftDevice will select the fastest common PHY in each direction. + * + * If the peer does not support the PHY Update Procedure, then the resulting + * @ref BLE_GAP_EVT_PHY_UPDATE event will have a status set to + * @ref BLE_HCI_UNSUPPORTED_REMOTE_FEATURE. + * + * If the PHY procedure was rejected by the peer due to a procedure collision, the status + * will be @ref BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION or + * @ref BLE_HCI_DIFFERENT_TRANSACTION_COLLISION. + * If the peer responds to the PHY Update procedure with invalid parameters, the status + * will be @ref BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS. + * If the PHY procedure was rejected by the peer for a different reason, the status will + * contain the reason as specified by the peer. + * + * @events + * @event{@ref BLE_GAP_EVT_PHY_UPDATE, Result of the PHY Update Procedure.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GAP_CENTRAL_PHY_UPDATE} + * @mmsc{@ref BLE_GAP_PERIPHERAL_PHY_UPDATE} + * @endmscs + * + * @param[in] conn_handle Connection handle to indicate the connection for which the PHY Update is requested. + * @param[in] p_gap_phys Pointer to PHY structure. + * + * @retval ::NRF_SUCCESS Successfully requested a PHY Update. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported PHYs supplied to the call. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::NRF_ERROR_BUSY Procedure is already in progress or not allowed at this time. Process pending events and wait for the pending procedure to complete and retry. + * + */ +SVCALL(SD_BLE_GAP_PHY_UPDATE, uint32_t, sd_ble_gap_phy_update(uint16_t conn_handle, ble_gap_phys_t const *p_gap_phys)); + + +/**@brief Initiate or respond to a Data Length Update Procedure. + * + * @note If the application uses @ref BLE_GAP_DATA_LENGTH_AUTO for one or more members of + * p_dl_params, the SoftDevice will choose the highest value supported in current + * configuration and connection parameters. + * + * @param[in] conn_handle Connection handle. + * @param[in] p_dl_params Pointer to local parameters to be used in Data Length Update + * Procedure. Set any member to @ref BLE_GAP_DATA_LENGTH_AUTO to let + * the SoftDevice automatically decide the value for that member. + * Set to NULL to use automatic values for all members. + * @param[out] p_dl_limitation Pointer to limitation to be written when local device does not + * have enough resources or does not support the requested Data Length + * Update parameters. Ignored if NULL. + * + * @mscs + * @mmsc{@ref BLE_GAP_DATA_LENGTH_UPDATE_PROCEDURE_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS Successfully set Data Length Extension initiation/response parameters. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. + * @retval ::NRF_ERROR_NOT_SUPPORTED The requested parameters are not supported by the SoftDevice. Inspect + * p_dl_limitation to see which parameter is not supported. + * @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the requested parameters. + * Use @ref sd_ble_cfg_set with @ref BLE_CONN_CFG_GAP to increase the connection event length. + * Inspect p_dl_limitation to see where the limitation is. + * @retval ::NRF_ERROR_BUSY Peer has already initiated a Data Length Update Procedure. Process the + * pending @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST event to respond. + */ +SVCALL(SD_BLE_GAP_DATA_LENGTH_UPDATE, uint32_t, sd_ble_gap_data_length_update(uint16_t conn_handle, ble_gap_data_length_params_t const *p_dl_params, ble_gap_data_length_limitation_t *p_dl_limitation)); + +/**@brief Start the Quality of Service (QoS) channel survey module. + * + * @details The channel survey module provides measurements of the energy levels on + * the Bluetooth Low Energy channels. When the module is enabled, @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT + * events will periodically report the measured energy levels for each channel. + * + * @note The measurements are scheduled with lower priority than other Bluetooth Low Energy roles, + * Radio Timeslot API events and Flash API events. + * + * @note The channel survey module will attempt to do measurements so that the average interval + * between measurements will be interval_us. However due to the channel survey module + * having the lowest priority of all roles and modules, this may not be possible. In that + * case fewer than expected channel survey reports may be given. + * + * @note In order to use the channel survey module, @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available + * must be set. This is done using @ref sd_ble_cfg_set. + * + * @param[in] interval_us Requested average interval for the measurements and reports. See + * @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVALS for valid ranges. If set + * to @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_CONTINUOUS, the channel + * survey role will be scheduled at every available opportunity. + * + * @retval ::NRF_SUCCESS The module is successfully started. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter supplied. interval_us is out of the + * allowed range. + * @retval ::NRF_ERROR_INVALID_STATE Trying to start the module when already running. + * @retval ::NRF_ERROR_RESOURCES The channel survey module is not available to the application. + * Set @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available using + * @ref sd_ble_cfg_set. + */ +SVCALL(SD_BLE_GAP_QOS_CHANNEL_SURVEY_START, uint32_t, sd_ble_gap_qos_channel_survey_start(uint32_t interval_us)); + +/**@brief Stop the Quality of Service (QoS) channel survey module. + * + * @retval ::NRF_SUCCESS The module is successfully stopped. + * @retval ::NRF_ERROR_INVALID_STATE Trying to stop the module when it is not running. + */ +SVCALL(SD_BLE_GAP_QOS_CHANNEL_SURVEY_STOP, uint32_t, sd_ble_gap_qos_channel_survey_stop(void)); + + +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // BLE_GAP_H__ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gatt.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gatt.h new file mode 100644 index 0000000000..98a7a150bf --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gatt.h @@ -0,0 +1,228 @@ +/* + * Copyright (c) 2013 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_GATT Generic Attribute Profile (GATT) Common + @{ + @brief Common definitions and prototypes for the GATT interfaces. + */ + +#ifndef BLE_GATT_H__ +#define BLE_GATT_H__ + +#include +#include "nrf_svc.h" +#include "nrf_error.h" +#include "ble_hci.h" +#include "ble_ranges.h" +#include "ble_types.h" +#include "ble_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup BLE_GATT_DEFINES Defines + * @{ */ + +/** @brief Default ATT MTU, in bytes. */ +#define BLE_GATT_ATT_MTU_DEFAULT 23 + +/**@brief Invalid Attribute Handle. */ +#define BLE_GATT_HANDLE_INVALID 0x0000 + +/**@brief First Attribute Handle. */ +#define BLE_GATT_HANDLE_START 0x0001 + +/**@brief Last Attribute Handle. */ +#define BLE_GATT_HANDLE_END 0xFFFF + +/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources + * @{ */ +#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */ +/** @} */ + +/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations + * @{ */ +#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */ +#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */ +#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */ +#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */ +#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */ +#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */ +/** @} */ + +/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags + * @{ */ +#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00 /**< Cancel prepared write. */ +#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01 /**< Execute prepared write. */ +/** @} */ + +/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations + * @{ */ +#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */ +#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */ +#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */ +/** @} */ + +/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes + * @{ */ +#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */ +#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */ +#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */ +#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */ +#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */ +#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */ +#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */ +#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */ +#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */ +#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */ +#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorization. */ +#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */ +#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */ +#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */ +#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */ +#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */ +#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */ +#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */ +#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */ +#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */ +#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */ +#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */ +#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */ +#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */ +#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */ +#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */ +#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */ +#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */ +#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */ +#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */ +#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */ +/** @} */ + + +/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats + * @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml + * @{ */ +#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */ +#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */ +#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */ +#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */ +#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */ +#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */ +#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */ +#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */ +#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */ +#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */ +#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */ +#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */ +#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */ +#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */ +/** @} */ + +/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces + * @{ + */ +#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01 /**< Bluetooth SIG defined Namespace. */ +#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000 /**< Namespace Description Unknown. */ +/** @} */ + +/** @} */ + +/** @addtogroup BLE_GATT_STRUCTURES Structures + * @{ */ + +/** + * @brief BLE GATT connection configuration parameters, set with @ref sd_ble_cfg_set. + * + * @retval ::NRF_ERROR_INVALID_PARAM att_mtu is smaller than @ref BLE_GATT_ATT_MTU_DEFAULT. + */ +typedef struct +{ + uint16_t att_mtu; /**< Maximum size of ATT packet the SoftDevice can send or receive. + The default and minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. + @mscs + @mmsc{@ref BLE_GATTC_MTU_EXCHANGE} + @mmsc{@ref BLE_GATTS_MTU_EXCHANGE} + @endmscs + */ +} ble_gatt_conn_cfg_t; + +/**@brief GATT Characteristic Properties. */ +typedef struct +{ + /* Standard properties */ + uint8_t broadcast :1; /**< Broadcasting of the value permitted. */ + uint8_t read :1; /**< Reading the value permitted. */ + uint8_t write_wo_resp :1; /**< Writing the value with Write Command permitted. */ + uint8_t write :1; /**< Writing the value with Write Request permitted. */ + uint8_t notify :1; /**< Notification of the value permitted. */ + uint8_t indicate :1; /**< Indications of the value permitted. */ + uint8_t auth_signed_wr :1; /**< Writing the value with Signed Write Command permitted. */ +} ble_gatt_char_props_t; + +/**@brief GATT Characteristic Extended Properties. */ +typedef struct +{ + /* Extended properties */ + uint8_t reliable_wr :1; /**< Writing the value with Queued Write operations permitted. */ + uint8_t wr_aux :1; /**< Writing the Characteristic User Description descriptor permitted. */ +} ble_gatt_char_ext_props_t; + +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // BLE_GATT_H__ + +/** @} */ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gattc.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gattc.h new file mode 100644 index 0000000000..7fb3920244 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gattc.h @@ -0,0 +1,715 @@ +/* + * Copyright (c) 2011 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client + @{ + @brief Definitions and prototypes for the GATT Client interface. + */ + +#ifndef BLE_GATTC_H__ +#define BLE_GATTC_H__ + +#include +#include "nrf.h" +#include "nrf_svc.h" +#include "nrf_error.h" +#include "ble_ranges.h" +#include "ble_types.h" +#include "ble_err.h" +#include "ble_gatt.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations + * @{ */ + +/**@brief GATTC API SVC numbers. */ +enum BLE_GATTC_SVCS +{ + SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */ + SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */ + SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */ + SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */ + SD_BLE_GATTC_ATTR_INFO_DISCOVER, /**< Attribute Information Discovery. */ + SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */ + SD_BLE_GATTC_READ, /**< Generic read. */ + SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */ + SD_BLE_GATTC_WRITE, /**< Generic write. */ + SD_BLE_GATTC_HV_CONFIRM, /**< Handle Value Confirmation. */ + SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. */ +}; + +/** + * @brief GATT Client Event IDs. + */ +enum BLE_GATTC_EVTS +{ + BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. \n See @ref ble_gattc_evt_prim_srvc_disc_rsp_t. */ + BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. \n See @ref ble_gattc_evt_rel_disc_rsp_t. */ + BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. \n See @ref ble_gattc_evt_char_disc_rsp_t. */ + BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. \n See @ref ble_gattc_evt_desc_disc_rsp_t. */ + BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, /**< Attribute Information Response event. \n See @ref ble_gattc_evt_attr_info_disc_rsp_t. */ + BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. \n See @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t. */ + BLE_GATTC_EVT_READ_RSP, /**< Read Response event. \n See @ref ble_gattc_evt_read_rsp_t. */ + BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. \n See @ref ble_gattc_evt_char_vals_read_rsp_t. */ + BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. \n See @ref ble_gattc_evt_write_rsp_t. */ + BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. \n Confirm indication with @ref sd_ble_gattc_hv_confirm. \n See @ref ble_gattc_evt_hvx_t. */ + BLE_GATTC_EVT_EXCHANGE_MTU_RSP, /**< Exchange MTU Response event. \n See @ref ble_gattc_evt_exchange_mtu_rsp_t. */ + BLE_GATTC_EVT_TIMEOUT, /**< Timeout event. \n See @ref ble_gattc_evt_timeout_t. */ + BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE /**< Write without Response transmission complete. \n See @ref ble_gattc_evt_write_cmd_tx_complete_t. */ +}; + +/** @} */ + +/** @addtogroup BLE_GATTC_DEFINES Defines + * @{ */ + +/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC + * @{ */ +#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */ +/** @} */ + +/** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats + * @{ */ +#define BLE_GATTC_ATTR_INFO_FORMAT_16BIT 1 /**< 16-bit Attribute Information Format. */ +#define BLE_GATTC_ATTR_INFO_FORMAT_128BIT 2 /**< 128-bit Attribute Information Format. */ +/** @} */ + +/** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults + * @{ */ +#define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Write without Response that can be queued for transmission. */ +/** @} */ + +/** @} */ + +/** @addtogroup BLE_GATTC_STRUCTURES Structures + * @{ */ + +/** + * @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set. + */ +typedef struct +{ + uint8_t write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for transmission. + The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */ +} ble_gattc_conn_cfg_t; + +/**@brief Operation Handle Range. */ +typedef struct +{ + uint16_t start_handle; /**< Start Handle. */ + uint16_t end_handle; /**< End Handle. */ +} ble_gattc_handle_range_t; + + +/**@brief GATT service. */ +typedef struct +{ + ble_uuid_t uuid; /**< Service UUID. */ + ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */ +} ble_gattc_service_t; + + +/**@brief GATT include. */ +typedef struct +{ + uint16_t handle; /**< Include Handle. */ + ble_gattc_service_t included_srvc; /**< Handle of the included service. */ +} ble_gattc_include_t; + + +/**@brief GATT characteristic. */ +typedef struct +{ + ble_uuid_t uuid; /**< Characteristic UUID. */ + ble_gatt_char_props_t char_props; /**< Characteristic Properties. */ + uint8_t char_ext_props : 1; /**< Extended properties present. */ + uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */ + uint16_t handle_value; /**< Handle of the Characteristic Value. */ +} ble_gattc_char_t; + + +/**@brief GATT descriptor. */ +typedef struct +{ + uint16_t handle; /**< Descriptor Handle. */ + ble_uuid_t uuid; /**< Descriptor UUID. */ +} ble_gattc_desc_t; + + +/**@brief Write Parameters. */ +typedef struct +{ + uint8_t write_op; /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */ + uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */ + uint16_t handle; /**< Handle to the attribute to be written. */ + uint16_t offset; /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */ + uint16_t len; /**< Length of data in bytes. */ + uint8_t const *p_value; /**< Pointer to the value data. */ +} ble_gattc_write_params_t; + +/**@brief Attribute Information for 16-bit Attribute UUID. */ +typedef struct +{ + uint16_t handle; /**< Attribute handle. */ + ble_uuid_t uuid; /**< 16-bit Attribute UUID. */ +} ble_gattc_attr_info16_t; + +/**@brief Attribute Information for 128-bit Attribute UUID. */ +typedef struct +{ + uint16_t handle; /**< Attribute handle. */ + ble_uuid128_t uuid; /**< 128-bit Attribute UUID. */ +} ble_gattc_attr_info128_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */ +typedef struct +{ + uint16_t count; /**< Service count. */ + ble_gattc_service_t services[1]; /**< Service data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_prim_srvc_disc_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */ +typedef struct +{ + uint16_t count; /**< Include count. */ + ble_gattc_include_t includes[1]; /**< Include data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_rel_disc_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */ +typedef struct +{ + uint16_t count; /**< Characteristic count. */ + ble_gattc_char_t chars[1]; /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_char_disc_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */ +typedef struct +{ + uint16_t count; /**< Descriptor count. */ + ble_gattc_desc_t descs[1]; /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_desc_disc_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */ +typedef struct +{ + uint16_t count; /**< Attribute count. */ + uint8_t format; /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */ + union { + ble_gattc_attr_info16_t attr_info16[1]; /**< Attribute information for 16-bit Attribute UUID. + @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ + ble_gattc_attr_info128_t attr_info128[1]; /**< Attribute information for 128-bit Attribute UUID. + @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ + } info; /**< Attribute information union. */ +} ble_gattc_evt_attr_info_disc_rsp_t; + +/**@brief GATT read by UUID handle value pair. */ +typedef struct +{ + uint16_t handle; /**< Attribute Handle. */ + uint8_t *p_value; /**< Pointer to the Attribute Value, length is available in @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */ +} ble_gattc_handle_value_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */ +typedef struct +{ + uint16_t count; /**< Handle-Value Pair Count. */ + uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */ + uint8_t handle_value[1]; /**< Handle-Value(s) list. To iterate through the list use @ref sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter. + @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_char_val_by_uuid_read_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */ +typedef struct +{ + uint16_t handle; /**< Attribute Handle. */ + uint16_t offset; /**< Offset of the attribute data. */ + uint16_t len; /**< Attribute data length. */ + uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_read_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */ +typedef struct +{ + uint16_t len; /**< Concatenated Attribute values length. */ + uint8_t values[1]; /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_char_vals_read_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */ +typedef struct +{ + uint16_t handle; /**< Attribute Handle. */ + uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */ + uint16_t offset; /**< Data offset. */ + uint16_t len; /**< Data length. */ + uint8_t data[1]; /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_write_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */ +typedef struct +{ + uint16_t handle; /**< Handle to which the HVx operation applies. */ + uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */ + uint16_t len; /**< Attribute data length. */ + uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gattc_evt_hvx_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */ +typedef struct +{ + uint16_t server_rx_mtu; /**< Server RX MTU size. */ +} ble_gattc_evt_exchange_mtu_rsp_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */ +typedef struct +{ + uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */ +} ble_gattc_evt_timeout_t; + +/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */ +typedef struct +{ + uint8_t count; /**< Number of write without response transmissions completed. */ +} ble_gattc_evt_write_cmd_tx_complete_t; + +/**@brief GATTC event structure. */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle on which event occurred. */ + uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ + uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */ + union + { + ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */ + ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */ + ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */ + ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */ + ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */ + ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */ + ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */ + ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */ + ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */ + ble_gattc_evt_exchange_mtu_rsp_t exchange_mtu_rsp; /**< Exchange MTU Response Event Parameters. */ + ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */ + ble_gattc_evt_attr_info_disc_rsp_t attr_info_disc_rsp; /**< Attribute Information Discovery Event Parameters. */ + ble_gattc_evt_write_cmd_tx_complete_t write_cmd_tx_complete; /**< Write without Response transmission complete Event Parameters. */ + } params; /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */ +} ble_gattc_evt_t; +/** @} */ + +/** @addtogroup BLE_GATTC_FUNCTIONS Functions + * @{ */ + +/**@brief Initiate or continue a GATT Primary Service Discovery procedure. + * + * @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle. + * If the last service has not been reached, this function must be called again with an updated start handle value to continue the search. + * + * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with + * type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event. + * + * @events + * @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] start_handle Handle to start searching from. + * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned. + * + * @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid)); + + +/**@brief Initiate or continue a GATT Relationship Discovery procedure. + * + * @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached, + * this must be called again with an updated handle range to continue the search. + * + * @events + * @event{@ref BLE_GATTC_EVT_REL_DISC_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_REL_DISC_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on. + * + * @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); + + +/**@brief Initiate or continue a GATT Characteristic Discovery procedure. + * + * @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached, + * this must be called again with an updated handle range to continue the discovery. + * + * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with + * type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event. + * + * @events + * @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on. + * + * @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); + + +/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure. + * + * @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached, + * this must be called again with an updated handle range to continue the discovery. + * + * @events + * @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_DESC_DISC_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on. + * + * @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); + + +/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure. + * + * @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached, + * this must be called again with an updated handle range to continue the discovery. + * + * @events + * @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_READ_UUID_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_uuid Pointer to a Characteristic value UUID to read. + * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on. + * + * @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const *p_uuid, ble_gattc_handle_range_t const *p_handle_range)); + + +/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure. + * + * @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor + * to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the + * complete value. + * + * @events + * @event{@ref BLE_GATTC_EVT_READ_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_VALUE_READ_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] handle The handle of the attribute to be read. + * @param[in] offset Offset into the attribute value to be read. + * + * @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset)); + + +/**@brief Initiate a GATT Read Multiple Characteristic Values procedure. + * + * @details This function initiates a GATT Read Multiple Characteristic Values procedure. + * + * @events + * @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_READ_MULT_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read. + * @param[in] handle_count The number of handles in p_handles. + * + * @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count)); + + +/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure. + * + * @details This function can perform all write procedures described in GATT. + * + * @note Only one write with response procedure can be ongoing per connection at a time. + * If the application tries to write with response while another write with response procedure is ongoing, + * the function call will return @ref NRF_ERROR_BUSY. + * A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer. + * + * @note The number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size + * When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES. + * A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete. + * + * @note The application can keep track of the available queue element count for writes without responses by following the procedure below: + * - Store initial queue element count in a variable. + * - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS. + * - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event. + * + * @events + * @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.} + * @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC} + * @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC} + * @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC} + * @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_write_params A pointer to a write parameters structure. + * + * @retval ::NRF_SUCCESS Successfully started the Write procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. + * @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry. + * @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued. + * Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params)); + + +/**@brief Send a Handle Value Confirmation to the GATT Server. + * + * @mscs + * @mmsc{@ref BLE_GATTC_HVI_MSC} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] handle The handle of the attribute in the indication. + * + * @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed. + * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle)); + +/**@brief Discovers information about a range of attributes on a GATT server. + * + * @events + * @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.} + * @endevents + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] p_handle_range The range of handles to request information about. + * + * @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_ATTR_INFO_DISCOVER, uint32_t, sd_ble_gattc_attr_info_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * p_handle_range)); + +/**@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server. + * + * @details The SoftDevice sets ATT_MTU to the minimum of: + * - The Client RX MTU value, and + * - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. + * + * However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT. + * + * @events + * @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTC_MTU_EXCHANGE} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] client_rx_mtu Client RX MTU size. + * - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. + * - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration + used for this connection. + * - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply + * if an ATT_MTU exchange has already been performed in the other direction. + * + * @retval ::NRF_SUCCESS Successfully sent request to the server. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied. + * @retval ::NRF_ERROR_BUSY Client procedure already in progress. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, uint32_t, sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle, uint16_t client_rx_mtu)); + +/**@brief Iterate through Handle-Value(s) list in @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event. + * + * @param[in] p_gattc_evt Pointer to event buffer containing @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event. + * @note If the buffer contains different event, behavior is undefined. + * @param[in,out] p_iter Iterator, points to @ref ble_gattc_handle_value_t structure that will be filled in with + * the next Handle-Value pair in each iteration. If the function returns other than + * @ref NRF_SUCCESS, it will not be changed. + * - To start iteration, initialize the structure to zero. + * - To continue, pass the value from previous iteration. + * + * \code + * ble_gattc_handle_value_t iter; + * memset(&iter, 0, sizeof(ble_gattc_handle_value_t)); + * while (sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(&ble_evt.evt.gattc_evt, &iter) == NRF_SUCCESS) + * { + * app_handle = iter.handle; + * memcpy(app_value, iter.p_value, ble_evt.evt.gattc_evt.params.char_val_by_uuid_read_rsp.value_len); + * } + * \endcode + * + * @retval ::NRF_SUCCESS Successfully retrieved the next Handle-Value pair. + * @retval ::NRF_ERROR_NOT_FOUND No more Handle-Value pairs available in the list. + */ +__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter); + +/** @} */ + +#ifndef SUPPRESS_INLINE_IMPLEMENTATION + +__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter) +{ + uint32_t value_len = p_gattc_evt->params.char_val_by_uuid_read_rsp.value_len; + uint8_t *p_first = p_gattc_evt->params.char_val_by_uuid_read_rsp.handle_value; + uint8_t *p_next = p_iter->p_value ? p_iter->p_value + value_len : p_first; + + if ((p_next - p_first) / (sizeof(uint16_t) + value_len) < p_gattc_evt->params.char_val_by_uuid_read_rsp.count) + { + p_iter->handle = (uint16_t)p_next[1] << 8 | p_next[0]; + p_iter->p_value = p_next + sizeof(uint16_t); + return NRF_SUCCESS; + } + else + { + return NRF_ERROR_NOT_FOUND; + } +} + +#endif /* SUPPRESS_INLINE_IMPLEMENTATION */ + +#ifdef __cplusplus +} +#endif +#endif /* BLE_GATTC_H__ */ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gatts.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gatts.h new file mode 100644 index 0000000000..e437b6e076 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_gatts.h @@ -0,0 +1,845 @@ +/* + * Copyright (c) 2011 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server + @{ + @brief Definitions and prototypes for the GATTS interface. + */ + +#ifndef BLE_GATTS_H__ +#define BLE_GATTS_H__ + +#include +#include "nrf_svc.h" +#include "nrf_error.h" +#include "ble_hci.h" +#include "ble_ranges.h" +#include "ble_types.h" +#include "ble_err.h" +#include "ble_gatt.h" +#include "ble_gap.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations + * @{ */ + +/** + * @brief GATTS API SVC numbers. + */ +enum BLE_GATTS_SVCS +{ + SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */ + SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */ + SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */ + SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */ + SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */ + SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */ + SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */ + SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */ + SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */ + SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */ + SD_BLE_GATTS_SYS_ATTR_GET, /**< Retrieve the persistent system attributes. */ + SD_BLE_GATTS_INITIAL_USER_HANDLE_GET, /**< Retrieve the first valid user handle. */ + SD_BLE_GATTS_ATTR_GET, /**< Retrieve the UUID and/or metadata of an attribute. */ + SD_BLE_GATTS_EXCHANGE_MTU_REPLY /**< Reply to Exchange MTU Request. */ +}; + +/** + * @brief GATT Server Event IDs. + */ +enum BLE_GATTS_EVTS +{ + BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. \n See @ref ble_gatts_evt_write_t. */ + BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. \n Reply with @ref sd_ble_gatts_rw_authorize_reply. \n See @ref ble_gatts_evt_rw_authorize_request_t. */ + BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending. \n Respond with @ref sd_ble_gatts_sys_attr_set. \n See @ref ble_gatts_evt_sys_attr_missing_t. */ + BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. \n See @ref ble_gatts_evt_hvc_t. */ + BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. \n No additional event structure applies. */ + BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. \n Reply with @ref sd_ble_gatts_exchange_mtu_reply. \n See @ref ble_gatts_evt_exchange_mtu_request_t. */ + BLE_GATTS_EVT_TIMEOUT, /**< Peer failed to respond to an ATT request in time. \n See @ref ble_gatts_evt_timeout_t. */ + BLE_GATTS_EVT_HVN_TX_COMPLETE /**< Handle Value Notification transmission complete. \n See @ref ble_gatts_evt_hvn_tx_complete_t. */ +}; + +/**@brief GATTS Configuration IDs. + * + * IDs that uniquely identify a GATTS configuration. + */ +enum BLE_GATTS_CFGS +{ + BLE_GATTS_CFG_SERVICE_CHANGED = BLE_GATTS_CFG_BASE, /**< Service changed configuration. */ + BLE_GATTS_CFG_ATTR_TAB_SIZE, /**< Attribute table size configuration. */ +}; + +/** @} */ + +/** @addtogroup BLE_GATTS_DEFINES Defines + * @{ */ + +/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS + * @{ */ +#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */ +#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */ +/** @} */ + +/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths + * @{ */ +#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */ +#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */ +/** @} */ + +/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types + * @{ */ +#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */ +#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */ +#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */ +/** @} */ + + +/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types + * @{ */ +#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */ +#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */ +#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */ +#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */ +#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */ +#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */ +#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */ +#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */ +/** @} */ + + +/** @defgroup BLE_GATTS_OPS GATT Server Operations + * @{ */ +#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */ +#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */ +#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */ +#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */ +#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */ +#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */ +#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */ +/** @} */ + +/** @defgroup BLE_GATTS_VLOCS GATT Value Locations + * @{ */ +#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */ +#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */ +#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack + will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */ +/** @} */ + +/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types + * @{ */ +#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */ +#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */ +#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */ +/** @} */ + +/** @defgroup BLE_GATTS_SYS_ATTR_FLAGS System Attribute Flags + * @{ */ +#define BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS (1 << 0) /**< Restrict system attributes to system services only. */ +#define BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS (1 << 1) /**< Restrict system attributes to user services only. */ +/** @} */ + +/** @defgroup BLE_GATTS_SERVICE_CHANGED Service Changed Inclusion Values + * @{ + */ +#define BLE_GATTS_SERVICE_CHANGED_DEFAULT (1) /**< Default is to include the Service Changed characteristic in the Attribute Table. */ +/** @} */ + +/** @defgroup BLE_GATTS_ATTR_TAB_SIZE Attribute Table size + * @{ + */ +#define BLE_GATTS_ATTR_TAB_SIZE_MIN (248) /**< Minimum Attribute Table size */ +#define BLE_GATTS_ATTR_TAB_SIZE_DEFAULT (1408) /**< Default Attribute Table size. */ +/** @} */ + +/** @defgroup BLE_GATTS_DEFAULTS GATT Server defaults + * @{ + */ +#define BLE_GATTS_HVN_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Handle Value Notifications that can be queued for transmission. */ +/** @} */ + +/** @} */ + +/** @addtogroup BLE_GATTS_STRUCTURES Structures + * @{ */ + +/** + * @brief BLE GATTS connection configuration parameters, set with @ref sd_ble_cfg_set. + */ +typedef struct +{ + uint8_t hvn_tx_queue_size; /**< Minimum guaranteed number of Handle Value Notifications that can be queued for transmission. + The default value is @ref BLE_GATTS_HVN_TX_QUEUE_SIZE_DEFAULT */ +} ble_gatts_conn_cfg_t; + +/**@brief Attribute metadata. */ +typedef struct +{ + ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */ + ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ + uint8_t vlen :1; /**< Variable length attribute. */ + uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/ + uint8_t rd_auth :1; /**< Read authorization and value will be requested from the application on every read operation. */ + uint8_t wr_auth :1; /**< Write authorization will be requested from the application on every Write Request operation (but not Write Command). */ +} ble_gatts_attr_md_t; + + +/**@brief GATT Attribute. */ +typedef struct +{ + ble_uuid_t const *p_uuid; /**< Pointer to the attribute UUID. */ + ble_gatts_attr_md_t const *p_attr_md; /**< Pointer to the attribute metadata structure. */ + uint16_t init_len; /**< Initial attribute value length in bytes. */ + uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */ + uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */ + uint8_t *p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer + that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location. + The stack may access that memory directly without the application's knowledge. For writable characteristics, this value must not be a location in flash memory.*/ +} ble_gatts_attr_t; + +/**@brief GATT Attribute Value. */ +typedef struct +{ + uint16_t len; /**< Length in bytes to be written or read. Length in bytes written or read after successful return.*/ + uint16_t offset; /**< Attribute value offset. */ + uint8_t *p_value; /**< Pointer to where value is stored or will be stored. + If value is stored in user memory, only the attribute length is updated when p_value == NULL. + Set to NULL when reading to obtain the complete length of the attribute value */ +} ble_gatts_value_t; + + +/**@brief GATT Characteristic Presentation Format. */ +typedef struct +{ + uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */ + int8_t exponent; /**< Exponent for integer data types. */ + uint16_t unit; /**< Unit from Bluetooth Assigned Numbers. */ + uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */ + uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */ +} ble_gatts_char_pf_t; + + +/**@brief GATT Characteristic metadata. */ +typedef struct +{ + ble_gatt_char_props_t char_props; /**< Characteristic Properties. */ + ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */ + uint8_t const *p_char_user_desc; /**< Pointer to a UTF-8 encoded string (non-NULL terminated), NULL if the descriptor is not required. */ + uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */ + uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */ + ble_gatts_char_pf_t const *p_char_pf; /**< Pointer to a presentation format structure or NULL if the CPF descriptor is not required. */ + ble_gatts_attr_md_t const *p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */ + ble_gatts_attr_md_t const *p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */ + ble_gatts_attr_md_t const *p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */ +} ble_gatts_char_md_t; + + +/**@brief GATT Characteristic Definition Handles. */ +typedef struct +{ + uint16_t value_handle; /**< Handle to the characteristic value. */ + uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ + uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ + uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ +} ble_gatts_char_handles_t; + + +/**@brief GATT HVx parameters. */ +typedef struct +{ + uint16_t handle; /**< Characteristic Value Handle. */ + uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */ + uint16_t offset; /**< Offset within the attribute value. */ + uint16_t *p_len; /**< Length in bytes to be written, length in bytes written after return. */ + uint8_t const *p_data; /**< Actual data content, use NULL to use the current attribute value. */ +} ble_gatts_hvx_params_t; + +/**@brief GATT Authorization parameters. */ +typedef struct +{ + uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ + uint8_t update : 1; /**< If set, data supplied in p_data will be used to update the attribute value. + Please note that for @ref BLE_GATTS_AUTHORIZE_TYPE_WRITE operations this bit must always be set, + as the data to be written needs to be stored and later provided by the application. */ + uint16_t offset; /**< Offset of the attribute value being updated. */ + uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */ + uint8_t const *p_data; /**< Pointer to new value used to update the attribute value. */ +} ble_gatts_authorize_params_t; + +/**@brief GATT Read or Write Authorize Reply parameters. */ +typedef struct +{ + uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */ + union { + ble_gatts_authorize_params_t read; /**< Read authorization parameters. */ + ble_gatts_authorize_params_t write; /**< Write authorization parameters. */ + } params; /**< Reply Parameters. */ +} ble_gatts_rw_authorize_reply_params_t; + +/**@brief Service Changed Inclusion configuration parameters, set with @ref sd_ble_cfg_set. */ +typedef struct +{ + uint8_t service_changed : 1; /**< If 1, include the Service Changed characteristic in the Attribute Table. Default is @ref BLE_GATTS_SERVICE_CHANGED_DEFAULT. */ +} ble_gatts_cfg_service_changed_t; + +/**@brief Attribute table size configuration parameters, set with @ref sd_ble_cfg_set. + * + * @retval ::NRF_ERROR_INVALID_LENGTH One or more of the following is true: + * - The specified Attribute Table size is too small. + * The minimum acceptable size is defined by @ref BLE_GATTS_ATTR_TAB_SIZE_MIN. + * - The specified Attribute Table size is not a multiple of 4. + */ +typedef struct +{ + uint32_t attr_tab_size; /**< Attribute table size. Default is @ref BLE_GATTS_ATTR_TAB_SIZE_DEFAULT, minimum is @ref BLE_GATTS_ATTR_TAB_SIZE_MIN. */ +} ble_gatts_cfg_attr_tab_size_t; + +/**@brief Config structure for GATTS configurations. */ +typedef union +{ + ble_gatts_cfg_service_changed_t service_changed; /**< Include service changed characteristic, cfg_id is @ref BLE_GATTS_CFG_SERVICE_CHANGED. */ + ble_gatts_cfg_attr_tab_size_t attr_tab_size; /**< Attribute table size, cfg_id is @ref BLE_GATTS_CFG_ATTR_TAB_SIZE. */ +} ble_gatts_cfg_t; + + +/**@brief Event structure for @ref BLE_GATTS_EVT_WRITE. */ +typedef struct +{ + uint16_t handle; /**< Attribute Handle. */ + ble_uuid_t uuid; /**< Attribute UUID. */ + uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */ + uint8_t auth_required; /**< Writing operation deferred due to authorization requirement. Application may use @ref sd_ble_gatts_value_set to finalize the writing operation. */ + uint16_t offset; /**< Offset for the write operation. */ + uint16_t len; /**< Length of the received data. */ + uint8_t data[1]; /**< Received data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. + See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ +} ble_gatts_evt_write_t; + +/**@brief Event substructure for authorized read requests, see @ref ble_gatts_evt_rw_authorize_request_t. */ +typedef struct +{ + uint16_t handle; /**< Attribute Handle. */ + ble_uuid_t uuid; /**< Attribute UUID. */ + uint16_t offset; /**< Offset for the read operation. */ +} ble_gatts_evt_read_t; + +/**@brief Event structure for @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */ +typedef struct +{ + uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */ + union { + ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */ + ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */ + } request; /**< Request Parameters. */ +} ble_gatts_evt_rw_authorize_request_t; + +/**@brief Event structure for @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. */ +typedef struct +{ + uint8_t hint; /**< Hint (currently unused). */ +} ble_gatts_evt_sys_attr_missing_t; + + +/**@brief Event structure for @ref BLE_GATTS_EVT_HVC. */ +typedef struct +{ + uint16_t handle; /**< Attribute Handle. */ +} ble_gatts_evt_hvc_t; + +/**@brief Event structure for @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST. */ +typedef struct +{ + uint16_t client_rx_mtu; /**< Client RX MTU size. */ +} ble_gatts_evt_exchange_mtu_request_t; + +/**@brief Event structure for @ref BLE_GATTS_EVT_TIMEOUT. */ +typedef struct +{ + uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */ +} ble_gatts_evt_timeout_t; + +/**@brief Event structure for @ref BLE_GATTS_EVT_HVN_TX_COMPLETE. */ +typedef struct +{ + uint8_t count; /**< Number of notification transmissions completed. */ +} ble_gatts_evt_hvn_tx_complete_t; + +/**@brief GATTS event structure. */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle on which the event occurred. */ + union + { + ble_gatts_evt_write_t write; /**< Write Event Parameters. */ + ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */ + ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */ + ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */ + ble_gatts_evt_exchange_mtu_request_t exchange_mtu_request; /**< Exchange MTU Request Event Parameters. */ + ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */ + ble_gatts_evt_hvn_tx_complete_t hvn_tx_complete; /**< Handle Value Notification transmission complete Event Parameters. */ + } params; /**< Event Parameters. */ +} ble_gatts_evt_t; + +/** @} */ + +/** @addtogroup BLE_GATTS_FUNCTIONS Functions + * @{ */ + +/**@brief Add a service declaration to the Attribute Table. + * + * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to + * add a secondary service declaration that is not referenced by another service later in the Attribute Table. + * + * @mscs + * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} + * @endmscs + * + * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES. + * @param[in] p_uuid Pointer to service UUID. + * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored. + * + * @retval ::NRF_SUCCESS Successfully added a service declaration. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table. + * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. + */ +SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const *p_uuid, uint16_t *p_handle)); + + +/**@brief Add an include declaration to the Attribute Table. + * + * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time). + * + * @note The included service must already be present in the Attribute Table prior to this call. + * + * @mscs + * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} + * @endmscs + * + * @param[in] service_handle Handle of the service where the included service is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. + * @param[in] inc_srvc_handle Handle of the included service. + * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored. + * + * @retval ::NRF_SUCCESS Successfully added an include declaration. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. + * @retval ::NRF_ERROR_NOT_SUPPORTED Feature is not supported, service_handle must be that of the last added service. + * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. + * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. + */ +SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *p_include_handle)); + + +/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table. + * + * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time). + * + * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writable auxiliaries bits, + * readable (no security) and writable (selectable) CCCDs and SCCDs and valid presentation format values. + * + * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions. + * + * @mscs + * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} + * @endmscs + * + * @param[in] service_handle Handle of the service where the characteristic is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. + * @param[in] p_char_md Characteristic metadata. + * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value. + * @param[out] p_handles Pointer to the structure where the assigned handles will be stored. + * + * @retval ::NRF_SUCCESS Successfully added a characteristic. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required. + * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. + */ +SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const *p_char_md, ble_gatts_attr_t const *p_attr_char_value, ble_gatts_char_handles_t *p_handles)); + + +/**@brief Add a descriptor to the Attribute Table. + * + * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time). + * + * @mscs + * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} + * @endmscs + * + * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. + * @param[in] p_attr Pointer to the attribute structure. + * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored. + * + * @retval ::NRF_SUCCESS Successfully added a descriptor. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints. + * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required. + * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. + */ +SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const *p_attr, uint16_t *p_handle)); + +/**@brief Set the value of a given attribute. + * + * @note Values other than system attributes can be set at any time, regardless of whether any active connections exist. + * + * @mscs + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute. + * @param[in] handle Attribute handle. + * @param[in,out] p_value Attribute value information. + * + * @retval ::NRF_SUCCESS Successfully set the value of the attribute. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. + * @retval ::NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute. + */ +SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)); + +/**@brief Get the value of a given attribute. + * + * @note If the attribute value is longer than the size of the supplied buffer, + * @ref ble_gatts_value_t::len will return the total attribute value length (excluding offset), + * and not the number of bytes actually returned in @ref ble_gatts_value_t::p_value. + * The application may use this information to allocate a suitable buffer size. + * + * @note When retrieving system attribute values with this function, the connection handle + * may refer to an already disconnected connection. Refer to the documentation of + * @ref sd_ble_gatts_sys_attr_get for further information. + * + * @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute. + * @param[in] handle Attribute handle. + * @param[in,out] p_value Attribute value information. + * + * @retval ::NRF_SUCCESS Successfully retrieved the value of the attribute. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid attribute offset supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute. + * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. + */ +SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)); + +/**@brief Notify or Indicate an attribute value. + * + * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation + * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that + * the application can atomically perform a value update and a server initiated transaction with a single API call. + * + * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution. + * The Attribute Table has been updated if one of the following error codes is returned: @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, + * @ref NRF_ERROR_FORBIDDEN, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and @ref NRF_ERROR_RESOURCES. + * The caller can check whether the value has been updated by looking at the contents of *(@ref ble_gatts_hvx_params_t::p_len). + * + * @note Only one indication procedure can be ongoing per connection at a time. + * If the application tries to indicate an attribute value while another indication procedure is ongoing, + * the function call will return @ref NRF_ERROR_BUSY. + * A @ref BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from the peer. + * + * @note The number of Handle Value Notifications that can be queued is configured by @ref ble_gatts_conn_cfg_t::hvn_tx_queue_size + * When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES. + * A @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event will be issued as soon as the transmission of the notification is complete. + * + * @note The application can keep track of the available queue element count for notifications by following the procedure below: + * - Store initial queue element count in a variable. + * - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS. + * - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event. + * + * @events + * @event{@ref BLE_GATTS_EVT_HVN_TX_COMPLETE, Notification transmission complete.} + * @event{@ref BLE_GATTS_EVT_HVC, Confirmation received from the peer.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC} + * @mmsc{@ref BLE_GATTS_HVN_MSC} + * @mmsc{@ref BLE_GATTS_HVI_MSC} + * @mmsc{@ref BLE_GATTS_HVX_DISABLED_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in,out] p_hvx_params Pointer to an HVx parameters structure. If @ref ble_gatts_hvx_params_t::p_data + * contains a non-NULL pointer the attribute value will be updated with the contents + * pointed by it before sending the notification or indication. If the attribute value + * is updated, @ref ble_gatts_hvx_params_t::p_len is updated by the SoftDevice to + * contain the number of actual bytes written, else it will be set to 0. + * + * @retval ::NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true: + * - Invalid Connection State + * - Notifications and/or indications not enabled in the CCCD + * - An ATT_MTU exchange is ongoing + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate. + * @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated. + * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. + * @retval ::NRF_ERROR_FORBIDDEN The connection's current security level is lower than the one required by the write permissions of the CCCD associated with this characteristic. + * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. + * @retval ::NRF_ERROR_BUSY For @ref BLE_GATT_HVX_INDICATION Procedure already in progress. Wait for a @ref BLE_GATTS_EVT_HVC event and retry. + * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. + * @retval ::NRF_ERROR_RESOURCES Too many notifications queued. + * Wait for a @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event and retry. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const *p_hvx_params)); + +/**@brief Indicate the Service Changed attribute value. + * + * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute + * Table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will + * be issued. + * + * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here. + * + * @events + * @event{@ref BLE_GATTS_EVT_SC_CONFIRM, Confirmation of attribute table change received from peer.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_GATTS_SC_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] start_handle Start of affected attribute handle range. + * @param[in] end_handle End of affected attribute handle range. + * + * @retval ::NRF_SUCCESS Successfully queued the Service Changed indication for transmission. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_NOT_SUPPORTED Service Changed not enabled at initialization. See @ref + * sd_ble_cfg_set and @ref ble_gatts_cfg_service_changed_t. + * @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true: + * - Invalid Connection State + * - Notifications and/or indications not enabled in the CCCD + * - An ATT_MTU exchange is ongoing + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application. + * @retval ::NRF_ERROR_BUSY Procedure already in progress. + * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle)); + +/**@brief Respond to a Read/Write authorization request. + * + * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application. + * + * @mscs + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC} + * @mmsc{@ref BLE_GATTS_READ_REQ_AUTH_MSC} + * @mmsc{@ref BLE_GATTS_WRITE_REQ_AUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application. + * + * @note @ref ble_gatts_authorize_params_t::p_data is ignored when this function is used to respond + * to a @ref BLE_GATTS_AUTHORIZE_TYPE_READ event if @ref ble_gatts_authorize_params_t::update + * is set to 0. + * + * @retval ::NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no authorization request pending. + * @retval ::NRF_ERROR_INVALID_PARAM Authorization op invalid, + * handle supplied does not match requested handle, + * or invalid data to be written provided by the application. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const *p_rw_authorize_reply_params)); + + +/**@brief Update persistent system attribute information. + * + * @details Supply information about persistent system attributes to the stack, + * previously obtained using @ref sd_ble_gatts_sys_attr_get. + * This call is only allowed for active connections, and is usually + * made immediately after a connection is established with an known bonded device, + * often as a response to a @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. + * + * p_sysattrs may point directly to the application's stored copy of the system attributes + * obtained using @ref sd_ble_gatts_sys_attr_get. + * If the pointer is NULL, the system attribute info is initialized, assuming that + * the application does not have any previously saved system attribute data for this device. + * + * @note The state of persistent system attributes is reset upon connection establishment and then remembered for its duration. + * + * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially. + * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or + * reset the SoftDevice to return to a known state. + * + * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified. + * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified. + * + * @mscs + * @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC} + * @mmsc{@ref BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC} + * @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle. + * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL. + * @param[in] len Size of data pointed by p_sys_attr_data, in octets. + * @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS + * + * @retval ::NRF_SUCCESS Successfully set the system attribute information. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied. + * @retval ::NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get. + * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. + */ +SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const *p_sys_attr_data, uint16_t len, uint32_t flags)); + + +/**@brief Retrieve persistent system attribute information from the stack. + * + * @details This call is used to retrieve information about values to be stored persistently by the application + * during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device, + * the system attribute information retrieved with this function should be restored using using @ref sd_ble_gatts_sys_attr_set. + * If retrieved after disconnection, the data should be read before a new connection established. The connection handle for + * the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it. + * Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes + * may be written to at any time by the peer during a connection's lifetime. + * + * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned. + * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned. + * + * @mscs + * @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC} + * @endmscs + * + * @param[in] conn_handle Connection handle of the recently terminated connection. + * @param[out] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. The format of the data is described + * in @ref BLE_GATTS_SYS_ATTRS_FORMAT. NULL can be provided to obtain the length of the data. + * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditionally updated to actual length of system attribute data. + * @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS + * + * @retval ::NRF_SUCCESS Successfully retrieved the system attribute information. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied. + * @retval ::NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer. + * @retval ::NRF_ERROR_NOT_FOUND No system attributes found. + */ +SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t *p_sys_attr_data, uint16_t *p_len, uint32_t flags)); + + +/**@brief Retrieve the first valid user attribute handle. + * + * @param[out] p_handle Pointer to an integer where the handle will be stored. + * + * @retval ::NRF_SUCCESS Successfully retrieved the handle. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + */ +SVCALL(SD_BLE_GATTS_INITIAL_USER_HANDLE_GET, uint32_t, sd_ble_gatts_initial_user_handle_get(uint16_t *p_handle)); + +/**@brief Retrieve the attribute UUID and/or metadata. + * + * @param[in] handle Attribute handle + * @param[out] p_uuid UUID of the attribute. Use NULL to omit this field. + * @param[out] p_md Metadata of the attribute. Use NULL to omit this field. + * + * @retval ::NRF_SUCCESS Successfully retrieved the attribute metadata, + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. Returned when both @c p_uuid and @c p_md are NULL. + * @retval ::NRF_ERROR_NOT_FOUND Attribute was not found. + */ +SVCALL(SD_BLE_GATTS_ATTR_GET, uint32_t, sd_ble_gatts_attr_get(uint16_t handle, ble_uuid_t * p_uuid, ble_gatts_attr_md_t * p_md)); + +/**@brief Reply to an ATT_MTU exchange request by sending an Exchange MTU Response to the client. + * + * @details This function is only used to reply to a @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event. + * + * @details The SoftDevice sets ATT_MTU to the minimum of: + * - The Client RX MTU value from @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, and + * - The Server RX MTU value. + * + * However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT. + * + * @mscs + * @mmsc{@ref BLE_GATTS_MTU_EXCHANGE} + * @endmscs + * + * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. + * @param[in] server_rx_mtu Server RX MTU size. + * - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. + * - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration + * used for this connection. + * - The value must be equal to Client RX MTU size given in @ref sd_ble_gattc_exchange_mtu_request + * if an ATT_MTU exchange has already been performed in the other direction. + * + * @retval ::NRF_SUCCESS Successfully sent response to the client. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no ATT_MTU exchange request pending. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid Server RX MTU size supplied. + * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. + */ +SVCALL(SD_BLE_GATTS_EXCHANGE_MTU_REPLY, uint32_t, sd_ble_gatts_exchange_mtu_reply(uint16_t conn_handle, uint16_t server_rx_mtu)); +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // BLE_GATTS_H__ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_hci.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_hci.h new file mode 100644 index 0000000000..f0dde9a03a --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_hci.h @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_COMMON + @{ +*/ + + +#ifndef BLE_HCI_H__ +#define BLE_HCI_H__ +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes + * @{ */ + +#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 /**< Success. */ +#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 /**< Unknown BLE Command. */ +#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /**< Unknown Connection Identifier. */ +/*0x03 Hardware Failure +0x04 Page Timeout +*/ +#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 /**< Authentication Failure. */ +#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 /**< Pin or Key missing. */ +#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 /**< Memory Capacity Exceeded. */ +#define BLE_HCI_CONNECTION_TIMEOUT 0x08 /**< Connection Timeout. */ +/*0x09 Connection Limit Exceeded +0x0A Synchronous Connection Limit To A Device Exceeded +0x0B ACL Connection Already Exists*/ +#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /**< Command Disallowed. */ +/*0x0D Connection Rejected due to Limited Resources +0x0E Connection Rejected Due To Security Reasons +0x0F Connection Rejected due to Unacceptable BD_ADDR +0x10 Connection Accept Timeout Exceeded +0x11 Unsupported Feature or Parameter Value*/ +#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 /**< Invalid BLE Command Parameters. */ +#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 /**< Remote User Terminated Connection. */ +#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 /**< Remote Device Terminated Connection due to low resources.*/ +#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 /**< Remote Device Terminated Connection due to power off. */ +#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /**< Local Host Terminated Connection. */ +/* +0x17 Repeated Attempts +0x18 Pairing Not Allowed +0x19 Unknown LMP PDU +*/ +#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /**< Unsupported Remote Feature. */ +/* +0x1B SCO Offset Rejected +0x1C SCO Interval Rejected +0x1D SCO Air Mode Rejected*/ +#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E /**< Invalid LMP Parameters. */ +#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /**< Unspecified Error. */ +/*0x20 Unsupported LMP Parameter Value +0x21 Role Change Not Allowed +*/ +#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /**< LMP Response Timeout. */ +#define BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION 0x23 /**< LMP Error Transaction Collision/LL Procedure Collision. */ +#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /**< LMP PDU Not Allowed. */ +/*0x25 Encryption Mode Not Acceptable +0x26 Link Key Can Not be Changed +0x27 Requested QoS Not Supported +*/ +#define BLE_HCI_INSTANT_PASSED 0x28 /**< Instant Passed. */ +#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 /**< Pairing with Unit Key Unsupported. */ +#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /**< Different Transaction Collision. */ +/* +0x2B Reserved +0x2C QoS Unacceptable Parameter +0x2D QoS Rejected +0x2E Channel Classification Not Supported +0x2F Insufficient Security +*/ +#define BLE_HCI_PARAMETER_OUT_OF_MANDATORY_RANGE 0x30 /**< Parameter Out Of Mandatory Range. */ +/* +0x31 Reserved +0x32 Role Switch Pending +0x33 Reserved +0x34 Reserved Slot Violation +0x35 Role Switch Failed +0x36 Extended Inquiry Response Too Large +0x37 Secure Simple Pairing Not Supported By Host. +0x38 Host Busy - Pairing +0x39 Connection Rejected due to No Suitable Channel Found*/ +#define BLE_HCI_CONTROLLER_BUSY 0x3A /**< Controller Busy. */ +#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B /**< Connection Interval Unacceptable. */ +#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C /**< Directed Advertisement Timeout. */ +#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D /**< Connection Terminated due to MIC Failure. */ +#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /**< Connection Failed to be Established. */ + +/** @} */ + + +#ifdef __cplusplus +} +#endif +#endif // BLE_HCI_H__ + +/** @} */ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_l2cap.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_l2cap.h new file mode 100644 index 0000000000..eaeb4b7d28 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_l2cap.h @@ -0,0 +1,506 @@ +/* + * Copyright (c) 2011 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP) + @{ + @brief Definitions and prototypes for the L2CAP interface. + */ + +#ifndef BLE_L2CAP_H__ +#define BLE_L2CAP_H__ + +#include +#include "nrf_svc.h" +#include "nrf_error.h" +#include "ble_ranges.h" +#include "ble_types.h" +#include "ble_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@addtogroup BLE_L2CAP_TERMINOLOGY Terminology + * @{ + * @details + * + * L2CAP SDU + * - A data unit that the application can send/receive to/from a peer. + * + * L2CAP PDU + * - A data unit that is exchanged between local and remote L2CAP entities. + * It consists of L2CAP protocol control information and payload fields. + * The payload field can contain an L2CAP SDU or a part of an L2CAP SDU. + * + * L2CAP MTU + * - The maximum length of an L2CAP SDU. + * + * L2CAP MPS + * - The maximum length of an L2CAP PDU payload field. + * + * Credits + * - A value indicating the number of L2CAP PDUs that the receiver of the credit can send to the peer. + * @} */ + +/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations + * @{ */ + +/**@brief L2CAP API SVC numbers. */ +enum BLE_L2CAP_SVCS +{ + SD_BLE_L2CAP_CH_SETUP = BLE_L2CAP_SVC_BASE + 0, /**< Set up an L2CAP channel. */ + SD_BLE_L2CAP_CH_RELEASE = BLE_L2CAP_SVC_BASE + 1, /**< Release an L2CAP channel. */ + SD_BLE_L2CAP_CH_RX = BLE_L2CAP_SVC_BASE + 2, /**< Receive an SDU on an L2CAP channel. */ + SD_BLE_L2CAP_CH_TX = BLE_L2CAP_SVC_BASE + 3, /**< Transmit an SDU on an L2CAP channel. */ + SD_BLE_L2CAP_CH_FLOW_CONTROL = BLE_L2CAP_SVC_BASE + 4, /**< Advanced SDU reception flow control. */ +}; + +/**@brief L2CAP Event IDs. */ +enum BLE_L2CAP_EVTS +{ + BLE_L2CAP_EVT_CH_SETUP_REQUEST = BLE_L2CAP_EVT_BASE + 0, /**< L2CAP Channel Setup Request event. + \n See @ref ble_l2cap_evt_ch_setup_request_t. */ + BLE_L2CAP_EVT_CH_SETUP_REFUSED = BLE_L2CAP_EVT_BASE + 1, /**< L2CAP Channel Setup Refused event. + \n See @ref ble_l2cap_evt_ch_setup_refused_t. */ + BLE_L2CAP_EVT_CH_SETUP = BLE_L2CAP_EVT_BASE + 2, /**< L2CAP Channel Setup Completed event. + \n See @ref ble_l2cap_evt_ch_setup_t. */ + BLE_L2CAP_EVT_CH_RELEASED = BLE_L2CAP_EVT_BASE + 3, /**< L2CAP Channel Released event. + \n No additional event structure applies. */ + BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED = BLE_L2CAP_EVT_BASE + 4, /**< L2CAP Channel SDU data buffer released event. + \n See @ref ble_l2cap_evt_ch_sdu_buf_released_t. */ + BLE_L2CAP_EVT_CH_CREDIT = BLE_L2CAP_EVT_BASE + 5, /**< L2CAP Channel Credit received. + \n See @ref ble_l2cap_evt_ch_credit_t. */ + BLE_L2CAP_EVT_CH_RX = BLE_L2CAP_EVT_BASE + 6, /**< L2CAP Channel SDU received. + \n See @ref ble_l2cap_evt_ch_rx_t. */ + BLE_L2CAP_EVT_CH_TX = BLE_L2CAP_EVT_BASE + 7, /**< L2CAP Channel SDU transmitted. + \n See @ref ble_l2cap_evt_ch_tx_t. */ +}; + +/** @} */ + +/**@addtogroup BLE_L2CAP_DEFINES Defines + * @{ */ + +/**@brief Maximum number of L2CAP channels per connection. */ +#define BLE_L2CAP_CH_COUNT_MAX (64) + +/**@brief Minimum L2CAP MTU, in bytes. */ +#define BLE_L2CAP_MTU_MIN (23) + +/**@brief Minimum L2CAP MPS, in bytes. */ +#define BLE_L2CAP_MPS_MIN (23) + +/**@brief Invalid CID. */ +#define BLE_L2CAP_CID_INVALID (0x0000) + +/**@brief Default number of credits for @ref sd_ble_l2cap_ch_flow_control. */ +#define BLE_L2CAP_CREDITS_DEFAULT (1) + +/**@defgroup BLE_L2CAP_CH_SETUP_REFUSED_SRCS L2CAP channel setup refused sources + * @{ */ +#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_LOCAL (0x01) /**< Local. */ +#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_REMOTE (0x02) /**< Remote. */ + /** @} */ + + /** @defgroup BLE_L2CAP_CH_STATUS_CODES L2CAP channel status codes + * @{ */ +#define BLE_L2CAP_CH_STATUS_CODE_SUCCESS (0x0000) /**< Success. */ +#define BLE_L2CAP_CH_STATUS_CODE_LE_PSM_NOT_SUPPORTED (0x0002) /**< LE_PSM not supported. */ +#define BLE_L2CAP_CH_STATUS_CODE_NO_RESOURCES (0x0004) /**< No resources available. */ +#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHENTICATION (0x0005) /**< Insufficient authentication. */ +#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHORIZATION (0x0006) /**< Insufficient authorization. */ +#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC_KEY_SIZE (0x0007) /**< Insufficient encryption key size. */ +#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC (0x0008) /**< Insufficient encryption. */ +#define BLE_L2CAP_CH_STATUS_CODE_INVALID_SCID (0x0009) /**< Invalid Source CID. */ +#define BLE_L2CAP_CH_STATUS_CODE_SCID_ALLOCATED (0x000A) /**< Source CID already allocated. */ +#define BLE_L2CAP_CH_STATUS_CODE_UNACCEPTABLE_PARAMS (0x000B) /**< Unacceptable parameters. */ +#define BLE_L2CAP_CH_STATUS_CODE_NOT_UNDERSTOOD (0x8000) /**< Command Reject received instead of LE Credit Based Connection Response. */ +#define BLE_L2CAP_CH_STATUS_CODE_TIMEOUT (0xC000) /**< Operation timed out. */ +/** @} */ + +/** @} */ + +/**@addtogroup BLE_L2CAP_STRUCTURES Structures + * @{ */ + +/** + * @brief BLE L2CAP connection configuration parameters, set with @ref sd_ble_cfg_set. + * + * @note These parameters are set per connection, so all L2CAP channels created on this connection + * will have the same parameters. + * + * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: + * - rx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. + * - tx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. + * - ch_count is greater than @ref BLE_L2CAP_CH_COUNT_MAX. + * @retval ::NRF_ERROR_NO_MEM rx_mps or tx_mps is set too high. + */ +typedef struct +{ + uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall + be able to receive on L2CAP channels on connections with this + configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ + uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall + be able to transmit on L2CAP channels on connections with this + configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ + uint8_t rx_queue_size; /**< Number of SDU data buffers that can be queued for reception per + L2CAP channel. The minimum value is one. */ + uint8_t tx_queue_size; /**< Number of SDU data buffers that can be queued for transmission + per L2CAP channel. The minimum value is one. */ + uint8_t ch_count; /**< Number of L2CAP channels the application can create per connection + with this configuration. The default value is zero, the maximum + value is @ref BLE_L2CAP_CH_COUNT_MAX. + @note if this parameter is set to zero, all other parameters in + @ref ble_l2cap_conn_cfg_t are ignored. */ +} ble_l2cap_conn_cfg_t; + +/**@brief L2CAP channel RX parameters. */ +typedef struct +{ + uint16_t rx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP shall be able to + receive on this L2CAP channel. + - Must be equal to or greater than @ref BLE_L2CAP_MTU_MIN. */ + uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be + able to receive on this L2CAP channel. + - Must be equal to or greater than @ref BLE_L2CAP_MPS_MIN. + - Must be equal to or less than @ref ble_l2cap_conn_cfg_t::rx_mps. */ + ble_data_t sdu_buf; /**< SDU data buffer for reception. + - If @ref ble_data_t::p_data is non-NULL, initial credits are + issued to the peer. + - If @ref ble_data_t::p_data is NULL, no initial credits are + issued to the peer. */ +} ble_l2cap_ch_rx_params_t; + +/**@brief L2CAP channel setup parameters. */ +typedef struct +{ + ble_l2cap_ch_rx_params_t rx_params; /**< L2CAP channel RX parameters. */ + uint16_t le_psm; /**< LE Protocol/Service Multiplexer. Used when requesting + setup of an L2CAP channel, ignored otherwise. */ + uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES. + Used when replying to a setup request of an L2CAP + channel, ignored otherwise. */ +} ble_l2cap_ch_setup_params_t; + +/**@brief L2CAP channel TX parameters. */ +typedef struct +{ + uint16_t tx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP is able to + transmit on this L2CAP channel. */ + uint16_t peer_mps; /**< The maximum L2CAP PDU payload size, in bytes, that the peer is + able to receive on this L2CAP channel. */ + uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP is able + to transmit on this L2CAP channel. This is effective tx_mps, + selected by the SoftDevice as + MIN( @ref ble_l2cap_ch_tx_params_t::peer_mps, @ref ble_l2cap_conn_cfg_t::tx_mps ) */ + uint16_t credits; /**< Initial credits given by the peer. */ +} ble_l2cap_ch_tx_params_t; + +/**@brief L2CAP Channel Setup Request event. */ +typedef struct +{ + ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ + uint16_t le_psm; /**< LE Protocol/Service Multiplexer. */ +} ble_l2cap_evt_ch_setup_request_t; + +/**@brief L2CAP Channel Setup Refused event. */ +typedef struct +{ + uint8_t source; /**< Source, see @ref BLE_L2CAP_CH_SETUP_REFUSED_SRCS */ + uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES */ +} ble_l2cap_evt_ch_setup_refused_t; + +/**@brief L2CAP Channel Setup Completed event. */ +typedef struct +{ + ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ +} ble_l2cap_evt_ch_setup_t; + +/**@brief L2CAP Channel SDU Data Duffer Released event. */ +typedef struct +{ + ble_data_t sdu_buf; /**< Returned reception or transmission SDU data buffer. The SoftDevice + returns SDU data buffers supplied by the application, which have + not yet been returned previously via a @ref BLE_L2CAP_EVT_CH_RX or + @ref BLE_L2CAP_EVT_CH_TX event. */ +} ble_l2cap_evt_ch_sdu_buf_released_t; + +/**@brief L2CAP Channel Credit received event. */ +typedef struct +{ + uint16_t credits; /**< Additional credits given by the peer. */ +} ble_l2cap_evt_ch_credit_t; + +/**@brief L2CAP Channel received SDU event. */ +typedef struct +{ + uint16_t sdu_len; /**< Total SDU length, in bytes. */ + ble_data_t sdu_buf; /**< SDU data buffer. + @note If there is not enough space in the buffer + (sdu_buf.len < sdu_len) then the rest of the SDU will be + silently discarded by the SoftDevice. */ +} ble_l2cap_evt_ch_rx_t; + +/**@brief L2CAP Channel transmitted SDU event. */ +typedef struct +{ + ble_data_t sdu_buf; /**< SDU data buffer. */ +} ble_l2cap_evt_ch_tx_t; + +/**@brief L2CAP event structure. */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle on which the event occured. */ + uint16_t local_cid; /**< Local Channel ID of the L2CAP channel, or + @ref BLE_L2CAP_CID_INVALID if not present. */ + union + { + ble_l2cap_evt_ch_setup_request_t ch_setup_request; /**< L2CAP Channel Setup Request Event Parameters. */ + ble_l2cap_evt_ch_setup_refused_t ch_setup_refused; /**< L2CAP Channel Setup Refused Event Parameters. */ + ble_l2cap_evt_ch_setup_t ch_setup; /**< L2CAP Channel Setup Completed Event Parameters. */ + ble_l2cap_evt_ch_sdu_buf_released_t ch_sdu_buf_released;/**< L2CAP Channel SDU Data Buffer Released Event Parameters. */ + ble_l2cap_evt_ch_credit_t credit; /**< L2CAP Channel Credit Received Event Parameters. */ + ble_l2cap_evt_ch_rx_t rx; /**< L2CAP Channel SDU Received Event Parameters. */ + ble_l2cap_evt_ch_tx_t tx; /**< L2CAP Channel SDU Transmitted Event Parameters. */ + } params; /**< Event Parameters. */ +} ble_l2cap_evt_t; + +/** @} */ + +/**@addtogroup BLE_L2CAP_FUNCTIONS Functions + * @{ */ + +/**@brief Set up an L2CAP channel. + * + * @details This function is used to: + * - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer. + * - Reply to a setup request of an L2CAP channel (if called in response to a + * @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection + * Response packet to a peer. + * + * @note A call to this function will require the application to keep the SDU data buffer alive + * until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or + * @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. + * + * @events + * @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.} + * @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC} + * @endmscs + * + * @param[in] conn_handle Connection Handle. + * @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel: + * - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP + * channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST + * event when replying to a setup request of an L2CAP channel. + * - As output: local_cid for this channel. + * @param[in] p_params L2CAP channel parameters. + * + * @retval ::NRF_SUCCESS Successfully queued request or response for transmission. + * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. + * @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link. + * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up). + * @retval ::NRF_ERROR_NOT_FOUND CID not found. + * @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels, + * see @ref ble_l2cap_conn_cfg_t::ch_count. + */ +SVCALL(SD_BLE_L2CAP_CH_SETUP, uint32_t, sd_ble_l2cap_ch_setup(uint16_t conn_handle, uint16_t *p_local_cid, ble_l2cap_ch_setup_params_t const *p_params)); + +/**@brief Release an L2CAP channel. + * + * @details This sends a Disconnection Request packet to a peer. + * + * @events + * @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC} + * @endmscs + * + * @param[in] conn_handle Connection Handle. + * @param[in] local_cid Local Channel ID of the L2CAP channel. + * + * @retval ::NRF_SUCCESS Successfully queued request for transmission. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is + * in progress for the L2CAP channel). + * @retval ::NRF_ERROR_NOT_FOUND CID not found. + */ +SVCALL(SD_BLE_L2CAP_CH_RELEASE, uint32_t, sd_ble_l2cap_ch_release(uint16_t conn_handle, uint16_t local_cid)); + +/**@brief Receive an SDU on an L2CAP channel. + * + * @details This may issue additional credits to the peer using an LE Flow Control Credit packet. + * + * @note A call to this function will require the application to keep the memory pointed by + * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX + * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. + * + * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers + * for reception per L2CAP channel. + * + * @events + * @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_L2CAP_CH_RX_MSC} + * @endmscs + * + * @param[in] conn_handle Connection Handle. + * @param[in] local_cid Local Channel ID of the L2CAP channel. + * @param[in] p_sdu_buf Pointer to the SDU data buffer. + * + * @retval ::NRF_SUCCESS Buffer accepted. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is + * in progress for an L2CAP channel). + * @retval ::NRF_ERROR_NOT_FOUND CID not found. + * @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a + * @ref BLE_L2CAP_EVT_CH_RX event and retry. + */ +SVCALL(SD_BLE_L2CAP_CH_RX, uint32_t, sd_ble_l2cap_ch_rx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); + +/**@brief Transmit an SDU on an L2CAP channel. + * + * @note A call to this function will require the application to keep the memory pointed by + * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX + * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. + * + * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for + * transmission per L2CAP channel. + * + * @note The application can keep track of the available credits for transmission by following + * the procedure below: + * - Store initial credits given by the peer in a variable. + * (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) + * - Decrement the variable, which stores the currently available credits, by + * ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns + * @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) + * - Increment the variable, which stores the currently available credits, by additional + * credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event. + * + * @events + * @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.} + * @endevents + * + * @mscs + * @mmsc{@ref BLE_L2CAP_CH_TX_MSC} + * @endmscs + * + * @param[in] conn_handle Connection Handle. + * @param[in] local_cid Local Channel ID of the L2CAP channel. + * @param[in] p_sdu_buf Pointer to the SDU data buffer. + * + * @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is + * in progress for the L2CAP channel). + * @retval ::NRF_ERROR_NOT_FOUND CID not found. + * @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than + * @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in + * @ref BLE_L2CAP_EVT_CH_SETUP event. + * @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a + * @ref BLE_L2CAP_EVT_CH_TX event and retry. + */ +SVCALL(SD_BLE_L2CAP_CH_TX, uint32_t, sd_ble_l2cap_ch_tx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); + +/**@brief Advanced SDU reception flow control. + * + * @details Adjust the way the SoftDevice issues credits to the peer. + * This may issue additional credits to the peer using an LE Flow Control Credit packet. + * + * @mscs + * @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC} + * @endmscs + * + * @param[in] conn_handle Connection Handle. + * @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set + * the value that will be used for newly created channels. + * @param[in] credits Number of credits that the SoftDevice will make sure the peer has every + * time it starts using a new reception buffer. + * - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will + * use if this function is not called. + * - If set to zero, the SoftDevice will stop issuing credits for new reception + * buffers the application provides or has provided. SDU reception that is + * currently ongoing will be allowed to complete. + * @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be + * written by the SoftDevice with the number of credits that is or will be + * available to the peer. If the value written by the SoftDevice is 0 when + * credits parameter was set to 0, the peer will not be able to send more + * data until more credits are provided by calling this function again with + * credits > 0. This parameter is ignored when local_cid is set to + * @ref BLE_L2CAP_CID_INVALID. + * + * @note Application should take care when setting number of credits higher than default value. In + * this case the application must make sure that the SoftDevice always has reception buffers + * available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have + * such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic + * on the connection handle may be stalled until the SoftDevice again has an available + * reception buffer. This applies even if the application has used this call to set the + * credits back to default, or zero. + * + * @retval ::NRF_SUCCESS Flow control parameters accepted. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is + * in progress for an L2CAP channel). + * @retval ::NRF_ERROR_NOT_FOUND CID not found. + */ +SVCALL(SD_BLE_L2CAP_CH_FLOW_CONTROL, uint32_t, sd_ble_l2cap_ch_flow_control(uint16_t conn_handle, uint16_t local_cid, uint16_t credits, uint16_t *p_credits)); + +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // BLE_L2CAP_H__ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_ranges.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_ranges.h new file mode 100644 index 0000000000..0935bca071 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_ranges.h @@ -0,0 +1,156 @@ +/* + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_COMMON + @{ + @defgroup ble_ranges Module specific SVC, event and option number subranges + @{ + + @brief Definition of SVC, event and option number subranges for each API module. + + @note + SVCs, event and option numbers are split into subranges for each API module. + Each module receives its entire allocated range of SVC calls, whether implemented or not, + but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range. + + Note that the symbols BLE__SVC_LAST is the end of the allocated SVC range, + rather than the last SVC function call actually defined and implemented. + + Specific SVC, event and option values are defined in each module's ble_.h file, + which defines names of each individual SVC code based on the range start value. +*/ + +#ifndef BLE_RANGES_H__ +#define BLE_RANGES_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#define BLE_SVC_BASE 0x60 /**< Common BLE SVC base. */ +#define BLE_SVC_LAST 0x6B /**< Common BLE SVC last. */ + +#define BLE_GAP_SVC_BASE 0x6C /**< GAP BLE SVC base. */ +#define BLE_GAP_SVC_LAST 0x9A /**< GAP BLE SVC last. */ + +#define BLE_GATTC_SVC_BASE 0x9B /**< GATTC BLE SVC base. */ +#define BLE_GATTC_SVC_LAST 0xA7 /**< GATTC BLE SVC last. */ + +#define BLE_GATTS_SVC_BASE 0xA8 /**< GATTS BLE SVC base. */ +#define BLE_GATTS_SVC_LAST 0xB7 /**< GATTS BLE SVC last. */ + +#define BLE_L2CAP_SVC_BASE 0xB8 /**< L2CAP BLE SVC base. */ +#define BLE_L2CAP_SVC_LAST 0xBF /**< L2CAP BLE SVC last. */ + + +#define BLE_EVT_INVALID 0x00 /**< Invalid BLE Event. */ + +#define BLE_EVT_BASE 0x01 /**< Common BLE Event base. */ +#define BLE_EVT_LAST 0x0F /**< Common BLE Event last. */ + +#define BLE_GAP_EVT_BASE 0x10 /**< GAP BLE Event base. */ +#define BLE_GAP_EVT_LAST 0x2F /**< GAP BLE Event last. */ + +#define BLE_GATTC_EVT_BASE 0x30 /**< GATTC BLE Event base. */ +#define BLE_GATTC_EVT_LAST 0x4F /**< GATTC BLE Event last. */ + +#define BLE_GATTS_EVT_BASE 0x50 /**< GATTS BLE Event base. */ +#define BLE_GATTS_EVT_LAST 0x6F /**< GATTS BLE Event last. */ + +#define BLE_L2CAP_EVT_BASE 0x70 /**< L2CAP BLE Event base. */ +#define BLE_L2CAP_EVT_LAST 0x8F /**< L2CAP BLE Event last. */ + + +#define BLE_OPT_INVALID 0x00 /**< Invalid BLE Option. */ + +#define BLE_OPT_BASE 0x01 /**< Common BLE Option base. */ +#define BLE_OPT_LAST 0x1F /**< Common BLE Option last. */ + +#define BLE_GAP_OPT_BASE 0x20 /**< GAP BLE Option base. */ +#define BLE_GAP_OPT_LAST 0x3F /**< GAP BLE Option last. */ + +#define BLE_GATT_OPT_BASE 0x40 /**< GATT BLE Option base. */ +#define BLE_GATT_OPT_LAST 0x5F /**< GATT BLE Option last. */ + +#define BLE_GATTC_OPT_BASE 0x60 /**< GATTC BLE Option base. */ +#define BLE_GATTC_OPT_LAST 0x7F /**< GATTC BLE Option last. */ + +#define BLE_GATTS_OPT_BASE 0x80 /**< GATTS BLE Option base. */ +#define BLE_GATTS_OPT_LAST 0x9F /**< GATTS BLE Option last. */ + +#define BLE_L2CAP_OPT_BASE 0xA0 /**< L2CAP BLE Option base. */ +#define BLE_L2CAP_OPT_LAST 0xBF /**< L2CAP BLE Option last. */ + + +#define BLE_CFG_INVALID 0x00 /**< Invalid BLE configuration. */ + +#define BLE_CFG_BASE 0x01 /**< Common BLE configuration base. */ +#define BLE_CFG_LAST 0x1F /**< Common BLE configuration last. */ + +#define BLE_CONN_CFG_BASE 0x20 /**< BLE connection configuration base. */ +#define BLE_CONN_CFG_LAST 0x3F /**< BLE connection configuration last. */ + +#define BLE_GAP_CFG_BASE 0x40 /**< GAP BLE configuration base. */ +#define BLE_GAP_CFG_LAST 0x5F /**< GAP BLE configuration last. */ + +#define BLE_GATT_CFG_BASE 0x60 /**< GATT BLE configuration base. */ +#define BLE_GATT_CFG_LAST 0x7F /**< GATT BLE configuration last. */ + +#define BLE_GATTC_CFG_BASE 0x80 /**< GATTC BLE configuration base. */ +#define BLE_GATTC_CFG_LAST 0x9F /**< GATTC BLE configuration last. */ + +#define BLE_GATTS_CFG_BASE 0xA0 /**< GATTS BLE configuration base. */ +#define BLE_GATTS_CFG_LAST 0xBF /**< GATTS BLE configuration last. */ + +#define BLE_L2CAP_CFG_BASE 0xC0 /**< L2CAP BLE configuration base. */ +#define BLE_L2CAP_CFG_LAST 0xDF /**< L2CAP BLE configuration last. */ + + + + + +#ifdef __cplusplus +} +#endif +#endif /* BLE_RANGES_H__ */ + +/** + @} + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_types.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_types.h new file mode 100644 index 0000000000..88c93180c8 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/ble_types.h @@ -0,0 +1,215 @@ +/* + * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_COMMON + @{ + @defgroup ble_types Common types and macro definitions + @{ + + @brief Common types and macro definitions for the BLE SoftDevice. + */ + +#ifndef BLE_TYPES_H__ +#define BLE_TYPES_H__ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup BLE_TYPES_DEFINES Defines + * @{ */ + +/** @defgroup BLE_CONN_HANDLES BLE Connection Handles + * @{ */ +#define BLE_CONN_HANDLE_INVALID 0xFFFF /**< Invalid Connection Handle. */ +#define BLE_CONN_HANDLE_ALL 0xFFFE /**< Applies to all Connection Handles. */ +/** @} */ + + +/** @defgroup BLE_UUID_VALUES Assigned Values for BLE UUIDs + * @{ */ +/* Generic UUIDs, applicable to all services */ +#define BLE_UUID_UNKNOWN 0x0000 /**< Reserved UUID. */ +#define BLE_UUID_SERVICE_PRIMARY 0x2800 /**< Primary Service. */ +#define BLE_UUID_SERVICE_SECONDARY 0x2801 /**< Secondary Service. */ +#define BLE_UUID_SERVICE_INCLUDE 0x2802 /**< Include. */ +#define BLE_UUID_CHARACTERISTIC 0x2803 /**< Characteristic. */ +#define BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP 0x2900 /**< Characteristic Extended Properties Descriptor. */ +#define BLE_UUID_DESCRIPTOR_CHAR_USER_DESC 0x2901 /**< Characteristic User Description Descriptor. */ +#define BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG 0x2902 /**< Client Characteristic Configuration Descriptor. */ +#define BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG 0x2903 /**< Server Characteristic Configuration Descriptor. */ +#define BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT 0x2904 /**< Characteristic Presentation Format Descriptor. */ +#define BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT 0x2905 /**< Characteristic Aggregate Format Descriptor. */ +/* GATT specific UUIDs */ +#define BLE_UUID_GATT 0x1801 /**< Generic Attribute Profile. */ +#define BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED 0x2A05 /**< Service Changed Characteristic. */ +/* GAP specific UUIDs */ +#define BLE_UUID_GAP 0x1800 /**< Generic Access Profile. */ +#define BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME 0x2A00 /**< Device Name Characteristic. */ +#define BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE 0x2A01 /**< Appearance Characteristic. */ +#define BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR 0x2A03 /**< Reconnection Address Characteristic. */ +#define BLE_UUID_GAP_CHARACTERISTIC_PPCP 0x2A04 /**< Peripheral Preferred Connection Parameters Characteristic. */ +#define BLE_UUID_GAP_CHARACTERISTIC_CAR 0x2AA6 /**< Central Address Resolution Characteristic. */ +#define BLE_UUID_GAP_CHARACTERISTIC_RPA_ONLY 0x2AC9 /**< Resolvable Private Address Only Characteristic. */ +/** @} */ + + +/** @defgroup BLE_UUID_TYPES Types of UUID + * @{ */ +#define BLE_UUID_TYPE_UNKNOWN 0x00 /**< Invalid UUID type. */ +#define BLE_UUID_TYPE_BLE 0x01 /**< Bluetooth SIG UUID (16-bit). */ +#define BLE_UUID_TYPE_VENDOR_BEGIN 0x02 /**< Vendor UUID types start at this index (128-bit). */ +/** @} */ + + +/** @defgroup BLE_APPEARANCES Bluetooth Appearance values + * @note Retrieved from http://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml + * @{ */ +#define BLE_APPEARANCE_UNKNOWN 0 /**< Unknown. */ +#define BLE_APPEARANCE_GENERIC_PHONE 64 /**< Generic Phone. */ +#define BLE_APPEARANCE_GENERIC_COMPUTER 128 /**< Generic Computer. */ +#define BLE_APPEARANCE_GENERIC_WATCH 192 /**< Generic Watch. */ +#define BLE_APPEARANCE_WATCH_SPORTS_WATCH 193 /**< Watch: Sports Watch. */ +#define BLE_APPEARANCE_GENERIC_CLOCK 256 /**< Generic Clock. */ +#define BLE_APPEARANCE_GENERIC_DISPLAY 320 /**< Generic Display. */ +#define BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384 /**< Generic Remote Control. */ +#define BLE_APPEARANCE_GENERIC_EYE_GLASSES 448 /**< Generic Eye-glasses. */ +#define BLE_APPEARANCE_GENERIC_TAG 512 /**< Generic Tag. */ +#define BLE_APPEARANCE_GENERIC_KEYRING 576 /**< Generic Keyring. */ +#define BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640 /**< Generic Media Player. */ +#define BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704 /**< Generic Barcode Scanner. */ +#define BLE_APPEARANCE_GENERIC_THERMOMETER 768 /**< Generic Thermometer. */ +#define BLE_APPEARANCE_THERMOMETER_EAR 769 /**< Thermometer: Ear. */ +#define BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832 /**< Generic Heart rate Sensor. */ +#define BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833 /**< Heart Rate Sensor: Heart Rate Belt. */ +#define BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896 /**< Generic Blood Pressure. */ +#define BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897 /**< Blood Pressure: Arm. */ +#define BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898 /**< Blood Pressure: Wrist. */ +#define BLE_APPEARANCE_GENERIC_HID 960 /**< Human Interface Device (HID). */ +#define BLE_APPEARANCE_HID_KEYBOARD 961 /**< Keyboard (HID Subtype). */ +#define BLE_APPEARANCE_HID_MOUSE 962 /**< Mouse (HID Subtype). */ +#define BLE_APPEARANCE_HID_JOYSTICK 963 /**< Joystick (HID Subtype). */ +#define BLE_APPEARANCE_HID_GAMEPAD 964 /**< Gamepad (HID Subtype). */ +#define BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965 /**< Digitizer Tablet (HID Subtype). */ +#define BLE_APPEARANCE_HID_CARD_READER 966 /**< Card Reader (HID Subtype). */ +#define BLE_APPEARANCE_HID_DIGITAL_PEN 967 /**< Digital Pen (HID Subtype). */ +#define BLE_APPEARANCE_HID_BARCODE 968 /**< Barcode Scanner (HID Subtype). */ +#define BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024 /**< Generic Glucose Meter. */ +#define BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088 /**< Generic Running Walking Sensor. */ +#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089 /**< Running Walking Sensor: In-Shoe. */ +#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090 /**< Running Walking Sensor: On-Shoe. */ +#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091 /**< Running Walking Sensor: On-Hip. */ +#define BLE_APPEARANCE_GENERIC_CYCLING 1152 /**< Generic Cycling. */ +#define BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153 /**< Cycling: Cycling Computer. */ +#define BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154 /**< Cycling: Speed Sensor. */ +#define BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155 /**< Cycling: Cadence Sensor. */ +#define BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156 /**< Cycling: Power Sensor. */ +#define BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157 /**< Cycling: Speed and Cadence Sensor. */ +#define BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 3136 /**< Generic Pulse Oximeter. */ +#define BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 3137 /**< Fingertip (Pulse Oximeter subtype). */ +#define BLE_APPEARANCE_PULSE_OXIMETER_WRIST_WORN 3138 /**< Wrist Worn(Pulse Oximeter subtype). */ +#define BLE_APPEARANCE_GENERIC_WEIGHT_SCALE 3200 /**< Generic Weight Scale. */ +#define BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS_ACT 5184 /**< Generic Outdoor Sports Activity. */ +#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_DISP 5185 /**< Location Display Device (Outdoor Sports Activity subtype). */ +#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_DISP 5186 /**< Location and Navigation Display Device (Outdoor Sports Activity subtype). */ +#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_POD 5187 /**< Location Pod (Outdoor Sports Activity subtype). */ +#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_POD 5188 /**< Location and Navigation Pod (Outdoor Sports Activity subtype). */ +/** @} */ + +/** @brief Set .type and .uuid fields of ble_uuid_struct to specified UUID value. */ +#define BLE_UUID_BLE_ASSIGN(instance, value) do {\ + instance.type = BLE_UUID_TYPE_BLE; \ + instance.uuid = value;} while(0) + +/** @brief Copy type and uuid members from src to dst ble_uuid_t pointer. Both pointers must be valid/non-null. */ +#define BLE_UUID_COPY_PTR(dst, src) do {\ + (dst)->type = (src)->type; \ + (dst)->uuid = (src)->uuid;} while(0) + +/** @brief Copy type and uuid members from src to dst ble_uuid_t struct. */ +#define BLE_UUID_COPY_INST(dst, src) do {\ + (dst).type = (src).type; \ + (dst).uuid = (src).uuid;} while(0) + +/** @brief Compare for equality both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */ +#define BLE_UUID_EQ(p_uuid1, p_uuid2) \ + (((p_uuid1)->type == (p_uuid2)->type) && ((p_uuid1)->uuid == (p_uuid2)->uuid)) + +/** @brief Compare for difference both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */ +#define BLE_UUID_NEQ(p_uuid1, p_uuid2) \ + (((p_uuid1)->type != (p_uuid2)->type) || ((p_uuid1)->uuid != (p_uuid2)->uuid)) + +/** @} */ + +/** @addtogroup BLE_TYPES_STRUCTURES Structures + * @{ */ + +/** @brief 128 bit UUID values. */ +typedef struct +{ + uint8_t uuid128[16]; /**< Little-Endian UUID bytes. */ +} ble_uuid128_t; + +/** @brief Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs. */ +typedef struct +{ + uint16_t uuid; /**< 16-bit UUID value or octets 12-13 of 128-bit UUID. */ + uint8_t type; /**< UUID type, see @ref BLE_UUID_TYPES. If type is @ref BLE_UUID_TYPE_UNKNOWN, the value of uuid is undefined. */ +} ble_uuid_t; + +/**@brief Data structure. */ +typedef struct +{ + uint8_t *p_data; /**< Pointer to the data buffer provided to/from the application. */ + uint16_t len; /**< Length of the data buffer, in bytes. */ +} ble_data_t; + +/** @} */ +#ifdef __cplusplus +} +#endif + +#endif /* BLE_TYPES_H__ */ + +/** + @} + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf52/nrf_mbr.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf52/nrf_mbr.h new file mode 100644 index 0000000000..cc5971c7a3 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf52/nrf_mbr.h @@ -0,0 +1,241 @@ +/* + * Copyright (c) 2014 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @defgroup nrf_mbr_api Master Boot Record API + @{ + + @brief APIs for updating SoftDevice and BootLoader + +*/ + +#ifndef NRF_MBR_H__ +#define NRF_MBR_H__ + +#include "nrf_svc.h" +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup NRF_MBR_DEFINES Defines + * @{ */ + +/**@brief MBR SVC Base number. */ +#define MBR_SVC_BASE (0x18) + +/**@brief Page size in words. */ +#define MBR_PAGE_SIZE_IN_WORDS (1024) + +/** @brief The size that must be reserved for the MBR when a SoftDevice is written to flash. +This is the offset where the first byte of the SoftDevice hex file is written.*/ +#define MBR_SIZE (0x1000) + +/** @} */ + +/** @addtogroup NRF_MBR_ENUMS Enumerations + * @{ */ + +/**@brief nRF Master Boot Record API SVC numbers. */ +enum NRF_MBR_SVCS +{ + SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */ +}; + +/**@brief Possible values for ::sd_mbr_command_t.command */ +enum NRF_MBR_COMMANDS +{ + SD_MBR_COMMAND_COPY_BL, /**< Copy a new BootLoader. @see ::sd_mbr_command_copy_bl_t*/ + SD_MBR_COMMAND_COPY_SD, /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/ + SD_MBR_COMMAND_INIT_SD, /**< Initialize forwarding interrupts to SD, and run reset function in SD. Does not require any parameters in ::sd_mbr_command_t params.*/ + SD_MBR_COMMAND_COMPARE, /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/ + SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Change the address the MBR starts after a reset. @see ::sd_mbr_command_vector_table_base_set_t*/ + SD_MBR_COMMAND_RESERVED, + SD_MBR_COMMAND_IRQ_FORWARD_ADDRESS_SET, /**< Start forwarding all interrupts to this address. @see ::sd_mbr_command_irq_forward_address_set_t*/ +}; + +/** @} */ + +/** @addtogroup NRF_MBR_TYPES Types + * @{ */ + +/**@brief This command copies part of a new SoftDevice + * + * The destination area is erased before copying. + * If dst is in the middle of a flash page, that whole flash page will be erased. + * If (dst+len) is in the middle of a flash page, that whole flash page will be erased. + * + * The user of this function is responsible for setting the BPROT registers. + * + * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly. + * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying. + */ +typedef struct +{ + uint32_t *src; /**< Pointer to the source of data to be copied.*/ + uint32_t *dst; /**< Pointer to the destination where the content is to be copied.*/ + uint32_t len; /**< Number of 32 bit words to copy. Must be a multiple of @ref MBR_PAGE_SIZE_IN_WORDS words.*/ +} sd_mbr_command_copy_sd_t; + + +/**@brief This command works like memcmp, but takes the length in words. + * + * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal. + * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal. + */ +typedef struct +{ + uint32_t *ptr1; /**< Pointer to block of memory. */ + uint32_t *ptr2; /**< Pointer to block of memory. */ + uint32_t len; /**< Number of 32 bit words to compare.*/ +} sd_mbr_command_compare_t; + + +/**@brief This command copies a new BootLoader. + * + * With this command, destination of BootLoader is always the address written in + * NRF_UICR->BOOTADDR. + * + * Destination is erased by this function. + * If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased. + * + * This function will use PROTENSET to protect the flash that is not intended to be written. + * + * On success, this function will not return. It will start the new BootLoader from reset-vector as normal. + * + * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen. + * @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set. + * @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area. + * @retval ::NRF_ERROR_NO_MEM if no parameter page is provided (see SoftDevice Specification for more info) + */ +typedef struct +{ + uint32_t *bl_src; /**< Pointer to the source of the Bootloader to be be copied.*/ + uint32_t bl_len; /**< Number of 32 bit words to copy for BootLoader. */ +} sd_mbr_command_copy_bl_t; + +/**@brief Change the address the MBR starts after a reset + * + * Once this function has been called, this address is where the MBR will start to forward + * interrupts to after a reset. + * + * To restore default forwarding this function should be called with @ref address set to 0. The + * MBR will then start forwarding interrupts to the address in NFR_UICR->BOOTADDR or to the + * SoftDevice if the BOOTADDR is not set. + * + * On success, this function will not return. It will reset the device. + * + * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen. + * @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size. + * @retval ::NRF_ERROR_NO_MEM if no parameter page is provided (see SoftDevice Specification for more info) + */ +typedef struct +{ + uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/ +} sd_mbr_command_vector_table_base_set_t; + +/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR + * + * Unlike sd_mbr_command_vector_table_base_set_t, this function does not reset, and it does not + * change where the MBR starts after reset. + * + * @retval ::NRF_SUCCESS + */ +typedef struct +{ + uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/ +} sd_mbr_command_irq_forward_address_set_t; + +/**@brief Input structure containing data used when calling ::sd_mbr_command + * + * Depending on what command value that is set, the corresponding params value type must also be + * set. See @ref NRF_MBR_COMMANDS for command types and corresponding params value type. If command + * @ref SD_MBR_COMMAND_INIT_SD is set, it is not necessary to set any values under params. + */ +typedef struct +{ + uint32_t command; /**< Type of command to be issued. See @ref NRF_MBR_COMMANDS. */ + union + { + sd_mbr_command_copy_sd_t copy_sd; /**< Parameters for copy SoftDevice.*/ + sd_mbr_command_compare_t compare; /**< Parameters for verify.*/ + sd_mbr_command_copy_bl_t copy_bl; /**< Parameters for copy BootLoader. Requires parameter page. */ + sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set. Requires parameter page.*/ + sd_mbr_command_irq_forward_address_set_t irq_forward_address_set; /**< Parameters for irq forward address set*/ + } params; /**< Command parameters. */ +} sd_mbr_command_t; + +/** @} */ + +/** @addtogroup NRF_MBR_FUNCTIONS Functions + * @{ */ + +/**@brief Issue Master Boot Record commands + * + * Commands used when updating a SoftDevice and bootloader. + * + * The @ref SD_MBR_COMMAND_COPY_BL and @ref SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires + * parameters to be retained by the MBR when resetting the IC. This is done in a separate flash + * page provided by the application. The UICR register UICR.NRFFW[1] must be set to an address + * corresponding to a page in the application flash space. This page will be cleared by the MBR and + * used to store the command before reset. When the UICR.NRFFW[1] field is set the page it refers + * to must not be used by the application. If the UICR.NRFFW[1] is set to 0xFFFFFFFF (the default) + * MBR commands which use flash will be unavailable and return @ref NRF_ERROR_NO_MEM. + * + * @param[in] param Pointer to a struct describing the command. + * + * @note For return values, see ::sd_mbr_command_copy_sd_t, ::sd_mbr_command_copy_bl_t, + * ::sd_mbr_command_compare_t, ::sd_mbr_command_vector_table_base_set_t, + * ::sd_mbr_command_irq_forward_address_set_t + * + * @retval ::NRF_ERROR_NO_MEM if UICR.NRFFW[1] is not set (i.e. is 0xFFFFFFFF). + * @retval ::NRF_ERROR_INVALID_PARAM if an invalid command is given. +*/ +SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param)); + +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // NRF_MBR_H__ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_ble.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_ble.h new file mode 100644 index 0000000000..9ebb41f538 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_ble.h @@ -0,0 +1,622 @@ +/* + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup BLE_COMMON BLE SoftDevice Common + @{ + @defgroup ble_api Events, type definitions and API calls + @{ + + @brief Module independent events, type definitions and API calls for the BLE SoftDevice. + + */ + +#ifndef BLE_H__ +#define BLE_H__ + +#include +#include "nrf_svc.h" +#include "nrf_error.h" +#include "ble_err.h" +#include "ble_gap.h" +#include "ble_l2cap.h" +#include "ble_gatt.h" +#include "ble_gattc.h" +#include "ble_gatts.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup BLE_COMMON_ENUMERATIONS Enumerations + * @{ */ + +/** + * @brief Common API SVC numbers. + */ +enum BLE_COMMON_SVCS +{ + SD_BLE_ENABLE = BLE_SVC_BASE, /**< Enable and initialize the BLE stack */ + SD_BLE_EVT_GET, /**< Get an event from the pending events queue. */ + SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific UUID. */ + SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */ + SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */ + SD_BLE_VERSION_GET, /**< Get the local version information (company ID, Link Layer Version, Link Layer Subversion). */ + SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */ + SD_BLE_OPT_SET, /**< Set a BLE option. */ + SD_BLE_OPT_GET, /**< Get a BLE option. */ + SD_BLE_CFG_SET, /**< Add a configuration to the BLE stack. */ +}; + +/** + * @brief BLE Module Independent Event IDs. + */ +enum BLE_COMMON_EVTS +{ + BLE_EVT_USER_MEM_REQUEST = BLE_EVT_BASE + 0, /**< User Memory request. @ref ble_evt_user_mem_request_t */ + BLE_EVT_USER_MEM_RELEASE = BLE_EVT_BASE + 1, /**< User Memory release. @ref ble_evt_user_mem_release_t */ +}; + +/**@brief BLE Connection Configuration IDs. + * + * IDs that uniquely identify a connection configuration. + */ +enum BLE_CONN_CFGS +{ + BLE_CONN_CFG_GAP = BLE_CONN_CFG_BASE + 0, /**< BLE GAP specific connection configuration. */ + BLE_CONN_CFG_GATTC = BLE_CONN_CFG_BASE + 1, /**< BLE GATTC specific connection configuration. */ + BLE_CONN_CFG_GATTS = BLE_CONN_CFG_BASE + 2, /**< BLE GATTS specific connection configuration. */ + BLE_CONN_CFG_GATT = BLE_CONN_CFG_BASE + 3, /**< BLE GATT specific connection configuration. */ + BLE_CONN_CFG_L2CAP = BLE_CONN_CFG_BASE + 4, /**< BLE L2CAP specific connection configuration. */ +}; + +/**@brief BLE Common Configuration IDs. + * + * IDs that uniquely identify a common configuration. + */ +enum BLE_COMMON_CFGS +{ + BLE_COMMON_CFG_VS_UUID = BLE_CFG_BASE, /**< Vendor specific UUID configuration */ +}; + +/**@brief Common Option IDs. + * IDs that uniquely identify a common option. + */ +enum BLE_COMMON_OPTS +{ + BLE_COMMON_OPT_PA_LNA = BLE_OPT_BASE + 0, /**< PA and LNA options */ + BLE_COMMON_OPT_CONN_EVT_EXT = BLE_OPT_BASE + 1, /**< Extended connection events option */ +}; + +/** @} */ + +/** @addtogroup BLE_COMMON_DEFINES Defines + * @{ */ + +/** @brief Required pointer alignment for BLE Events. +*/ +#define BLE_EVT_PTR_ALIGNMENT 4 + +/** @brief Leaves the maximum of the two arguments. +*/ +#define BLE_MAX(a, b) ((a) < (b) ? (b) : (a)) + +/** @brief Maximum possible length for BLE Events. + * @note The highest value used for @ref ble_gatt_conn_cfg_t::att_mtu in any connection configuration shall be used as a parameter. + * If that value has not been configured for any connections then @ref BLE_GATT_ATT_MTU_DEFAULT must be used instead. +*/ +#define BLE_EVT_LEN_MAX(ATT_MTU) ( \ + offsetof(ble_evt_t, evt.gattc_evt.params.prim_srvc_disc_rsp.services) + ((ATT_MTU) - 1) / 4 * sizeof(ble_gattc_service_t) \ +) + +/** @defgroup BLE_USER_MEM_TYPES User Memory Types + * @{ */ +#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */ +#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */ +/** @} */ + +/** @defgroup BLE_UUID_VS_COUNTS Vendor Specific UUID counts + * @{ + */ +#define BLE_UUID_VS_COUNT_DEFAULT 10 /**< Default VS UUID count. */ +#define BLE_UUID_VS_COUNT_MAX 254 /**< Maximum VS UUID count. */ +/** @} */ + +/** @defgroup BLE_COMMON_CFG_DEFAULTS Configuration defaults. + * @{ + */ +#define BLE_CONN_CFG_TAG_DEFAULT 0 /**< Default configuration tag, SoftDevice default connection configuration. */ + +/** @} */ + +/** @} */ + +/** @addtogroup BLE_COMMON_STRUCTURES Structures + * @{ */ + +/**@brief User Memory Block. */ +typedef struct +{ + uint8_t *p_mem; /**< Pointer to the start of the user memory block. */ + uint16_t len; /**< Length in bytes of the user memory block. */ +} ble_user_mem_block_t; + +/**@brief Event structure for @ref BLE_EVT_USER_MEM_REQUEST. */ +typedef struct +{ + uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */ +} ble_evt_user_mem_request_t; + +/**@brief Event structure for @ref BLE_EVT_USER_MEM_RELEASE. */ +typedef struct +{ + uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */ + ble_user_mem_block_t mem_block; /**< User memory block */ +} ble_evt_user_mem_release_t; + +/**@brief Event structure for events not associated with a specific function module. */ +typedef struct +{ + uint16_t conn_handle; /**< Connection Handle on which this event occurred. */ + union + { + ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */ + ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */ + } params; /**< Event parameter union. */ +} ble_common_evt_t; + +/**@brief BLE Event header. */ +typedef struct +{ + uint16_t evt_id; /**< Value from a BLE__EVT series. */ + uint16_t evt_len; /**< Length in octets including this header. */ +} ble_evt_hdr_t; + +/**@brief Common BLE Event type, wrapping the module specific event reports. */ +typedef struct +{ + ble_evt_hdr_t header; /**< Event header. */ + union + { + ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */ + ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */ + ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */ + ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */ + ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */ + } evt; /**< Event union. */ +} ble_evt_t; + + +/** + * @brief Version Information. + */ +typedef struct +{ + uint8_t version_number; /**< Link Layer Version number. See https://www.bluetooth.org/en-us/specification/assigned-numbers/link-layer for assigned values. */ + uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */ + uint16_t subversion_number; /**< Link Layer Sub Version number, corresponds to the SoftDevice Config ID or Firmware ID (FWID). */ +} ble_version_t; + +/** + * @brief Configuration parameters for the PA and LNA. + */ +typedef struct +{ + uint8_t enable :1; /**< Enable toggling for this amplifier */ + uint8_t active_high :1; /**< Set the pin to be active high */ + uint8_t gpio_pin :6; /**< The GPIO pin to toggle for this amplifier */ +} ble_pa_lna_cfg_t; + +/** + * @brief PA & LNA GPIO toggle configuration + * + * This option configures the SoftDevice to toggle pins when the radio is active for use with a power amplifier and/or + * a low noise amplifier. + * + * Toggling the pins is achieved by using two PPI channels and a GPIOTE channel. The hardware channel IDs are provided + * by the application and should be regarded as reserved as long as any PA/LNA toggling is enabled. + * + * @note @ref sd_ble_opt_get is not supported for this option. + * @note Setting this option while the radio is in use (i.e. any of the roles are active) may have undefined consequences + * and must be avoided by the application. + */ +typedef struct +{ + ble_pa_lna_cfg_t pa_cfg; /**< Power Amplifier configuration */ + ble_pa_lna_cfg_t lna_cfg; /**< Low Noise Amplifier configuration */ + + uint8_t ppi_ch_id_set; /**< PPI channel used for radio pin setting */ + uint8_t ppi_ch_id_clr; /**< PPI channel used for radio pin clearing */ + uint8_t gpiote_ch_id; /**< GPIOTE channel used for radio pin toggling */ +} ble_common_opt_pa_lna_t; + +/** + * @brief Configuration of extended BLE connection events. + * + * When enabled the SoftDevice will dynamically extend the connection event when possible. + * + * The connection event length is controlled by the connection configuration as set by @ref ble_gap_conn_cfg_t::event_length. + * The connection event can be extended if there is time to send another packet pair before the start of the next connection interval, + * and if there are no conflicts with other BLE roles requesting radio time. + * + * @note @ref sd_ble_opt_get is not supported for this option. + */ +typedef struct +{ + uint8_t enable : 1; /**< Enable extended BLE connection events, disabled by default. */ +} ble_common_opt_conn_evt_ext_t; + +/**@brief Option structure for common options. */ +typedef union +{ + ble_common_opt_pa_lna_t pa_lna; /**< Parameters for controlling PA and LNA pin toggling. */ + ble_common_opt_conn_evt_ext_t conn_evt_ext; /**< Parameters for enabling extended connection events. */ +} ble_common_opt_t; + +/**@brief Common BLE Option type, wrapping the module specific options. */ +typedef union +{ + ble_common_opt_t common_opt; /**< COMMON options, opt_id in @ref BLE_COMMON_OPTS series. */ + ble_gap_opt_t gap_opt; /**< GAP option, opt_id in @ref BLE_GAP_OPTS series. */ +} ble_opt_t; + +/**@brief BLE connection configuration type, wrapping the module specific configurations, set with + * @ref sd_ble_cfg_set. + * + * @note Connection configurations don't have to be set. + * In the case that no configurations has been set, or fewer connection configurations has been set than enabled connections, + * the default connection configuration will be automatically added for the remaining connections. + * When creating connections with the default configuration, @ref BLE_CONN_CFG_TAG_DEFAULT should be used in + * place of @ref ble_conn_cfg_t::conn_cfg_tag. + * + * @sa sd_ble_gap_adv_start() + * @sa sd_ble_gap_connect() + * + * @mscs + * @mmsc{@ref BLE_CONN_CFG} + * @endmscs + + */ +typedef struct +{ + uint8_t conn_cfg_tag; /**< The application chosen tag it can use with the + @ref sd_ble_gap_adv_start() and @ref sd_ble_gap_connect() calls + to select this configuration when creating a connection. + Must be different for all connection configurations added and not @ref BLE_CONN_CFG_TAG_DEFAULT. */ + union { + ble_gap_conn_cfg_t gap_conn_cfg; /**< GAP connection configuration, cfg_id is @ref BLE_CONN_CFG_GAP. */ + ble_gattc_conn_cfg_t gattc_conn_cfg; /**< GATTC connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTC. */ + ble_gatts_conn_cfg_t gatts_conn_cfg; /**< GATTS connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTS. */ + ble_gatt_conn_cfg_t gatt_conn_cfg; /**< GATT connection configuration, cfg_id is @ref BLE_CONN_CFG_GATT. */ + ble_l2cap_conn_cfg_t l2cap_conn_cfg; /**< L2CAP connection configuration, cfg_id is @ref BLE_CONN_CFG_L2CAP. */ + } params; /**< Connection configuration union. */ +} ble_conn_cfg_t; + +/** + * @brief Configuration of Vendor Specific UUIDs, set with @ref sd_ble_cfg_set. + * + * @retval ::NRF_ERROR_INVALID_PARAM Too many UUIDs configured. + */ +typedef struct +{ + uint8_t vs_uuid_count; /**< Number of 128-bit Vendor Specific UUID bases to allocate memory for. + Default value is @ref BLE_UUID_VS_COUNT_DEFAULT. Maximum value is + @ref BLE_UUID_VS_COUNT_MAX. */ +} ble_common_cfg_vs_uuid_t; + +/**@brief Common BLE Configuration type, wrapping the common configurations. */ +typedef union +{ + ble_common_cfg_vs_uuid_t vs_uuid_cfg; /**< Vendor specific UUID configuration, cfg_id is @ref BLE_COMMON_CFG_VS_UUID. */ +} ble_common_cfg_t; + +/**@brief BLE Configuration type, wrapping the module specific configurations. */ +typedef union +{ + ble_conn_cfg_t conn_cfg; /**< Connection specific configurations, cfg_id in @ref BLE_CONN_CFGS series. */ + ble_common_cfg_t common_cfg; /**< Global common configurations, cfg_id in @ref BLE_COMMON_CFGS series. */ + ble_gap_cfg_t gap_cfg; /**< Global GAP configurations, cfg_id in @ref BLE_GAP_CFGS series. */ + ble_gatts_cfg_t gatts_cfg; /**< Global GATTS configuration, cfg_id in @ref BLE_GATTS_CFGS series. */ +} ble_cfg_t; + +/** @} */ + +/** @addtogroup BLE_COMMON_FUNCTIONS Functions + * @{ */ + +/**@brief Enable the BLE stack + * + * @param[in, out] p_app_ram_base Pointer to a variable containing the start address of the + * application RAM region (APP_RAM_BASE). On return, this will + * contain the minimum start address of the application RAM region + * required by the SoftDevice for this configuration. + * + * @note The memory requirement for a specific configuration will not increase between SoftDevices + * with the same major version number. + * + * @note The value of *p_app_ram_base when the app has done no custom configuration of the + * SoftDevice, i.e. the app has not called @ref sd_ble_cfg_set before @ref sd_ble_enable, can + * be found in the release notes. + * + * @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located + * between 0x20000000 and APP_RAM_BASE-1 and the application's RAM region is located between + * APP_RAM_BASE and the start of the call stack. + * + * @details This call initializes the BLE stack, no BLE related function other than @ref + * sd_ble_cfg_set can be called before this one. + * + * @mscs + * @mmsc{@ref BLE_COMMON_ENABLE} + * @endmscs + * + * @retval ::NRF_SUCCESS The BLE stack has been initialized successfully. + * @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized and cannot be reinitialized. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied. + * @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by *p_app_ram_base is not + * large enough to fit this configuration's memory requirement. Check *p_app_ram_base + * and set the start address of the application RAM region accordingly. + */ +SVCALL(SD_BLE_ENABLE, uint32_t, sd_ble_enable(uint32_t * p_app_ram_base)); + +/**@brief Add configurations for the BLE stack + * + * @param[in] cfg_id Config ID, see @ref BLE_CONN_CFGS, @ref BLE_COMMON_CFGS, @ref + * BLE_GAP_CFGS or @ref BLE_GATTS_CFGS. + * @param[in] p_cfg Pointer to a ble_cfg_t structure containing the configuration value. + * @param[in] app_ram_base The start address of the application RAM region (APP_RAM_BASE). + * See @ref sd_ble_enable for details about APP_RAM_BASE. + * + * @note The memory requirement for a specific configuration will not increase between SoftDevices + * with the same major version number. + * + * @note If a configuration is set more than once, the last one set is the one that takes effect on + * @ref sd_ble_enable. + * + * @note Any part of the BLE stack that is NOT configured with @ref sd_ble_cfg_set will have default + * configuration. + * + * @note @ref sd_ble_cfg_set may be called at any time when the SoftDevice is enabled (see @ref + * sd_softdevice_enable) while the BLE part of the SoftDevice is not enabled (see @ref + * sd_ble_enable). + * + * @note Error codes for the configurations are described in the configuration structs. + * + * @mscs + * @mmsc{@ref BLE_COMMON_ENABLE} + * @endmscs + * + * @retval ::NRF_SUCCESS The configuration has been added successfully. + * @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid cfg_id supplied. + * @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by app_ram_base is not + * large enough to fit this configuration's memory requirement. + */ +SVCALL(SD_BLE_CFG_SET, uint32_t, sd_ble_cfg_set(uint32_t cfg_id, ble_cfg_t const * p_cfg, uint32_t app_ram_base)); + +/**@brief Get an event from the pending events queue. + * + * @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length. + * This buffer must be aligned to the extend defined by @ref BLE_EVT_PTR_ALIGNMENT. + * The buffer should be interpreted as a @ref ble_evt_t struct. + * @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length. + * + * @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that + * an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt. + * The application is free to choose whether to call this function from thread mode (main context) or directly from the + * Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher + * priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned) + * every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so + * could potentially leave events in the internal queue without the application being aware of this fact. + * + * Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to + * be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event, + * @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size. + * The maximum possible event length is defined by @ref BLE_EVT_LEN_MAX. The application may also "peek" the event length + * by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return: + * + * \code + * uint16_t len; + * errcode = sd_ble_evt_get(NULL, &len); + * \endcode + * + * @mscs + * @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC} + * @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied. + * @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled. + * @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer. + */ +SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t *p_dest, uint16_t *p_len)); + + +/**@brief Add a Vendor Specific base UUID. + * + * @details This call enables the application to add a vendor specific base UUID to the BLE stack's table, for later + * use with all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t + * format when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code + * paths. This is accomplished by extending the grouping mechanism that the Bluetooth SIG standard base UUID uses + * for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to + * @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the UUID field + * in the same structure contains the 2 bytes at indexes 12 and 13. The number of possible 128-bit UUIDs available to + * the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536, + * although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array. + * + * @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by + * the 16-bit uuid field in @ref ble_uuid_t. + * + * @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in + * p_uuid_type along with an @ref NRF_SUCCESS error code. + * + * @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific UUID disregarding + * bytes 12 and 13. + * @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored. + * + * @retval ::NRF_SUCCESS Successfully added the Vendor Specific UUID. + * @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid. + * @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs. + */ +SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_vs_uuid, uint8_t *p_uuid_type)); + + +/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure. + * + * @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared + * to the corresponding ones in each entry of the table of vendor specific UUIDs populated with @ref sd_ble_uuid_vs_add + * to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index + * relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type. + * + * @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE. + * + * @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes). + * @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes. + * @param[out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in. + * + * @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length. + * @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs. + */ +SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const *p_uuid_le, ble_uuid_t *p_uuid)); + + +/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit). + * + * @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed. + * + * @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes. + * @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes). + * @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored. + * + * @retval ::NRF_SUCCESS Successfully encoded into the buffer. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type. + */ +SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const *p_uuid, uint8_t *p_uuid_le_len, uint8_t *p_uuid_le)); + + +/**@brief Get Version Information. + * + * @details This call allows the application to get the BLE stack version information. + * + * @param[out] p_version Pointer to a ble_version_t structure to be filled in. + * + * @retval ::NRF_SUCCESS Version information stored successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure). + */ +SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t *p_version)); + + +/**@brief Provide a user memory block. + * + * @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application. + * + * @param[in] conn_handle Connection handle. + * @param[in] p_block Pointer to a user memory block structure or NULL if memory is managed by the application. + * + * @mscs + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC} + * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC} + * @endmscs + * + * @retval ::NRF_SUCCESS Successfully queued a response to the peer. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_LENGTH Invalid user memory block length supplied. + * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no user memory request pending. + */ +SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t const *p_block)); + +/**@brief Set a BLE option. + * + * @details This call allows the application to set the value of an option. + * + * @mscs + * @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC} + * @endmscs + * + * @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS. + * @param[in] p_opt Pointer to a ble_opt_t structure containing the option value. + * + * @retval ::NRF_SUCCESS Option set successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. + * @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time. + * @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed. + */ +SVCALL(SD_BLE_OPT_SET, uint32_t, sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt)); + + +/**@brief Get a BLE option. + * + * @details This call allows the application to retrieve the value of an option. + * + * @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS. + * @param[out] p_opt Pointer to a ble_opt_t structure to be filled in. + * + * @retval ::NRF_SUCCESS Option retrieved successfully. + * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. + * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. + * @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time. + * @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed. + * @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported. + * + */ +SVCALL(SD_BLE_OPT_GET, uint32_t, sd_ble_opt_get(uint32_t opt_id, ble_opt_t *p_opt)); + +/** @} */ +#ifdef __cplusplus +} +#endif +#endif /* BLE_H__ */ + +/** + @} + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error.h new file mode 100644 index 0000000000..6badee98e5 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error.h @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2014 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + /** + @defgroup nrf_error SoftDevice Global Error Codes + @{ + + @brief Global Error definitions +*/ + +/* Header guard */ +#ifndef NRF_ERROR_H__ +#define NRF_ERROR_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions + * @{ */ +#define NRF_ERROR_BASE_NUM (0x0) ///< Global error base +#define NRF_ERROR_SDM_BASE_NUM (0x1000) ///< SDM error base +#define NRF_ERROR_SOC_BASE_NUM (0x2000) ///< SoC error base +#define NRF_ERROR_STK_BASE_NUM (0x3000) ///< STK error base +/** @} */ + +#define NRF_SUCCESS (NRF_ERROR_BASE_NUM + 0) ///< Successful command +#define NRF_ERROR_SVC_HANDLER_MISSING (NRF_ERROR_BASE_NUM + 1) ///< SVC handler is missing +#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED (NRF_ERROR_BASE_NUM + 2) ///< SoftDevice has not been enabled +#define NRF_ERROR_INTERNAL (NRF_ERROR_BASE_NUM + 3) ///< Internal Error +#define NRF_ERROR_NO_MEM (NRF_ERROR_BASE_NUM + 4) ///< No Memory for operation +#define NRF_ERROR_NOT_FOUND (NRF_ERROR_BASE_NUM + 5) ///< Not found +#define NRF_ERROR_NOT_SUPPORTED (NRF_ERROR_BASE_NUM + 6) ///< Not supported +#define NRF_ERROR_INVALID_PARAM (NRF_ERROR_BASE_NUM + 7) ///< Invalid Parameter +#define NRF_ERROR_INVALID_STATE (NRF_ERROR_BASE_NUM + 8) ///< Invalid state, operation disallowed in this state +#define NRF_ERROR_INVALID_LENGTH (NRF_ERROR_BASE_NUM + 9) ///< Invalid Length +#define NRF_ERROR_INVALID_FLAGS (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags +#define NRF_ERROR_INVALID_DATA (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data +#define NRF_ERROR_DATA_SIZE (NRF_ERROR_BASE_NUM + 12) ///< Invalid Data size +#define NRF_ERROR_TIMEOUT (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out +#define NRF_ERROR_NULL (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer +#define NRF_ERROR_FORBIDDEN (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation +#define NRF_ERROR_INVALID_ADDR (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address +#define NRF_ERROR_BUSY (NRF_ERROR_BASE_NUM + 17) ///< Busy +#define NRF_ERROR_CONN_COUNT (NRF_ERROR_BASE_NUM + 18) ///< Maximum connection count exceeded. +#define NRF_ERROR_RESOURCES (NRF_ERROR_BASE_NUM + 19) ///< Not enough resources for operation + +#ifdef __cplusplus +} +#endif +#endif // NRF_ERROR_H__ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error_sdm.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error_sdm.h new file mode 100644 index 0000000000..530959b9d6 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error_sdm.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + /** + @addtogroup nrf_sdm_api + @{ + @defgroup nrf_sdm_error SoftDevice Manager Error Codes + @{ + + @brief Error definitions for the SDM API +*/ + +/* Header guard */ +#ifndef NRF_ERROR_SDM_H__ +#define NRF_ERROR_SDM_H__ + +#include "nrf_error.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN (NRF_ERROR_SDM_BASE_NUM + 0) ///< Unknown LFCLK source. +#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1) ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts). +#define NRF_ERROR_SDM_INCORRECT_CLENR0 (NRF_ERROR_SDM_BASE_NUM + 2) ///< Incorrect CLENR0 (can be caused by erroneous SoftDevice flashing). + +#ifdef __cplusplus +} +#endif +#endif // NRF_ERROR_SDM_H__ + +/** + @} + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error_soc.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error_soc.h new file mode 100644 index 0000000000..1e784b8db3 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_error_soc.h @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @addtogroup nrf_soc_api + @{ + @defgroup nrf_soc_error SoC Library Error Codes + @{ + + @brief Error definitions for the SoC library + +*/ + +/* Header guard */ +#ifndef NRF_ERROR_SOC_H__ +#define NRF_ERROR_SOC_H__ + +#include "nrf_error.h" +#ifdef __cplusplus +extern "C" { +#endif + +/* Mutex Errors */ +#define NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN (NRF_ERROR_SOC_BASE_NUM + 0) ///< Mutex already taken + +/* NVIC errors */ +#define NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE (NRF_ERROR_SOC_BASE_NUM + 1) ///< NVIC interrupt not available +#define NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED (NRF_ERROR_SOC_BASE_NUM + 2) ///< NVIC interrupt priority not allowed +#define NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 3) ///< NVIC should not return + +/* Power errors */ +#define NRF_ERROR_SOC_POWER_MODE_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 4) ///< Power mode unknown +#define NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 5) ///< Power POF threshold unknown +#define NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 6) ///< Power off should not return + +/* Rand errors */ +#define NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES (NRF_ERROR_SOC_BASE_NUM + 7) ///< RAND not enough values + +/* PPI errors */ +#define NRF_ERROR_SOC_PPI_INVALID_CHANNEL (NRF_ERROR_SOC_BASE_NUM + 8) ///< Invalid PPI Channel +#define NRF_ERROR_SOC_PPI_INVALID_GROUP (NRF_ERROR_SOC_BASE_NUM + 9) ///< Invalid PPI Group + +#ifdef __cplusplus +} +#endif +#endif // NRF_ERROR_SOC_H__ +/** + @} + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_nvic.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_nvic.h new file mode 100644 index 0000000000..f5c7e8e028 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_nvic.h @@ -0,0 +1,486 @@ +/* + * Copyright (c) 2016 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @defgroup nrf_nvic_api SoftDevice NVIC API + * @{ + * + * @note In order to use this module, the following code has to be added to a .c file: + * \code + * nrf_nvic_state_t nrf_nvic_state = {0}; + * \endcode + * + * @note Definitions and declarations starting with __ (double underscore) in this header file are + * not intended for direct use by the application. + * + * @brief APIs for the accessing NVIC when using a SoftDevice. + * + */ + +#ifndef NRF_NVIC_H__ +#define NRF_NVIC_H__ + +#include +#include "nrf.h" +#include "nrf_svc.h" +#include "nrf_error.h" +#include "nrf_error_soc.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@addtogroup NRF_NVIC_DEFINES Defines + * @{ */ + +/**@defgroup NRF_NVIC_ISER_DEFINES SoftDevice NVIC internal definitions + * @{ */ + +#define __NRF_NVIC_NVMC_IRQn (30) /**< The peripheral ID of the NVMC. IRQ numbers are used to identify peripherals, but the NVMC doesn't have an IRQ number in the MDK. */ + +#define __NRF_NVIC_ISER_COUNT (2) /**< The number of ISER/ICER registers in the NVIC that are used. */ + +/**@brief Interrupts used by the SoftDevice, with IRQn in the range 0-31. */ +#define __NRF_NVIC_SD_IRQS_0 ((uint32_t)( \ + (1U << POWER_CLOCK_IRQn) \ + | (1U << RADIO_IRQn) \ + | (1U << RTC0_IRQn) \ + | (1U << TIMER0_IRQn) \ + | (1U << RNG_IRQn) \ + | (1U << ECB_IRQn) \ + | (1U << CCM_AAR_IRQn) \ + | (1U << TEMP_IRQn) \ + | (1U << __NRF_NVIC_NVMC_IRQn) \ + | (1U << (uint32_t)SWI5_IRQn) \ + )) + +/**@brief Interrupts used by the SoftDevice, with IRQn in the range 32-63. */ +#define __NRF_NVIC_SD_IRQS_1 ((uint32_t)0) + +/**@brief Interrupts available for to application, with IRQn in the range 0-31. */ +#define __NRF_NVIC_APP_IRQS_0 (~__NRF_NVIC_SD_IRQS_0) + +/**@brief Interrupts available for to application, with IRQn in the range 32-63. */ +#define __NRF_NVIC_APP_IRQS_1 (~__NRF_NVIC_SD_IRQS_1) + +/**@} */ + +/**@} */ + +/**@addtogroup NRF_NVIC_VARIABLES Variables + * @{ */ + +/**@brief Type representing the state struct for the SoftDevice NVIC module. */ +typedef struct +{ + uint32_t volatile __irq_masks[__NRF_NVIC_ISER_COUNT]; /**< IRQs enabled by the application in the NVIC. */ + uint32_t volatile __cr_flag; /**< Non-zero if already in a critical region */ +} nrf_nvic_state_t; + +/**@brief Variable keeping the state for the SoftDevice NVIC module. This must be declared in an + * application source file. */ +extern nrf_nvic_state_t nrf_nvic_state; + +/**@} */ + +/**@addtogroup NRF_NVIC_INTERNAL_FUNCTIONS SoftDevice NVIC internal functions + * @{ */ + +/**@brief Disables IRQ interrupts globally, including the SoftDevice's interrupts. + * + * @retval The value of PRIMASK prior to disabling the interrupts. + */ +__STATIC_INLINE int __sd_nvic_irq_disable(void); + +/**@brief Enables IRQ interrupts globally, including the SoftDevice's interrupts. + */ +__STATIC_INLINE void __sd_nvic_irq_enable(void); + +/**@brief Checks if IRQn is available to application + * @param[in] IRQn IRQ to check + * + * @retval 1 (true) if the IRQ to check is available to the application + */ +__STATIC_INLINE uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn); + +/**@brief Checks if priority is available to application + * @param[in] priority priority to check + * + * @retval 1 (true) if the priority to check is available to the application + */ +__STATIC_INLINE uint32_t __sd_nvic_is_app_accessible_priority(uint32_t priority); + +/**@} */ + +/**@addtogroup NRF_NVIC_FUNCTIONS SoftDevice NVIC public functions + * @{ */ + +/**@brief Enable External Interrupt. + * @note Corresponds to NVIC_EnableIRQ in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS. + * + * @retval ::NRF_SUCCESS The interrupt was enabled. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn); + +/**@brief Disable External Interrupt. + * @note Corresponds to NVIC_DisableIRQ in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS. + * + * @retval ::NRF_SUCCESS The interrupt was disabled. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn); + +/**@brief Get Pending Interrupt. + * @note Corresponds to NVIC_GetPendingIRQ in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_GetPendingIRQ documentation in CMSIS. + * @param[out] p_pending_irq Return value from NVIC_GetPendingIRQ. + * + * @retval ::NRF_SUCCESS The interrupt is available for the application. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq); + +/**@brief Set Pending Interrupt. + * @note Corresponds to NVIC_SetPendingIRQ in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS. + * + * @retval ::NRF_SUCCESS The interrupt is set pending. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn); + +/**@brief Clear Pending Interrupt. + * @note Corresponds to NVIC_ClearPendingIRQ in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS. + * + * @retval ::NRF_SUCCESS The interrupt pending flag is cleared. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn); + +/**@brief Set Interrupt Priority. + * @note Corresponds to NVIC_SetPriority in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * @pre Priority is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_SetPriority documentation in CMSIS. + * @param[in] priority A valid IRQ priority for use by the application. + * + * @retval ::NRF_SUCCESS The interrupt and priority level is available for the application. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority); + +/**@brief Get Interrupt Priority. + * @note Corresponds to NVIC_GetPriority in CMSIS. + * + * @pre IRQn is valid and not reserved by the stack. + * + * @param[in] IRQn See the NVIC_GetPriority documentation in CMSIS. + * @param[out] p_priority Return value from NVIC_GetPriority. + * + * @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority. + * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application. + */ +__STATIC_INLINE uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority); + +/**@brief System Reset. + * @note Corresponds to NVIC_SystemReset in CMSIS. + * + * @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN + */ +__STATIC_INLINE uint32_t sd_nvic_SystemReset(void); + +/**@brief Enter critical region. + * + * @post Application interrupts will be disabled. + * @note sd_nvic_critical_region_enter() and ::sd_nvic_critical_region_exit() must be called in matching pairs inside each + * execution context + * @sa sd_nvic_critical_region_exit + * + * @param[out] p_is_nested_critical_region If 1, the application is now in a nested critical region. + * + * @retval ::NRF_SUCCESS + */ +__STATIC_INLINE uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region); + +/**@brief Exit critical region. + * + * @pre Application has entered a critical region using ::sd_nvic_critical_region_enter. + * @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called. + * + * @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter. + * + * @retval ::NRF_SUCCESS + */ +__STATIC_INLINE uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region); + +/**@} */ + +#ifndef SUPPRESS_INLINE_IMPLEMENTATION + +__STATIC_INLINE int __sd_nvic_irq_disable(void) +{ + int pm = __get_PRIMASK(); + __disable_irq(); + return pm; +} + +__STATIC_INLINE void __sd_nvic_irq_enable(void) +{ + __enable_irq(); +} + +__STATIC_INLINE uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn) +{ + if (IRQn < 32) + { + return ((1UL<= (1 << __NVIC_PRIO_BITS)) + { + return 0; + } + if( priority == 0 + || priority == 1 + || priority == 4 + ) + { + return 0; + } + return 1; +} + + +__STATIC_INLINE uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn) +{ + if (!__sd_nvic_app_accessible_irq(IRQn)) + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } + if (!__sd_nvic_is_app_accessible_priority(NVIC_GetPriority(IRQn))) + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED; + } + + if (nrf_nvic_state.__cr_flag) + { + nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] |= (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); + } + else + { + NVIC_EnableIRQ(IRQn); + } + return NRF_SUCCESS; +} + +__STATIC_INLINE uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn) +{ + if (!__sd_nvic_app_accessible_irq(IRQn)) + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } + + if (nrf_nvic_state.__cr_flag) + { + nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] &= ~(1UL << ((uint32_t)(IRQn) & 0x1F)); + } + else + { + NVIC_DisableIRQ(IRQn); + } + + return NRF_SUCCESS; +} + +__STATIC_INLINE uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq) +{ + if (__sd_nvic_app_accessible_irq(IRQn)) + { + *p_pending_irq = NVIC_GetPendingIRQ(IRQn); + return NRF_SUCCESS; + } + else + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } +} + +__STATIC_INLINE uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn) +{ + if (__sd_nvic_app_accessible_irq(IRQn)) + { + NVIC_SetPendingIRQ(IRQn); + return NRF_SUCCESS; + } + else + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } +} + +__STATIC_INLINE uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn) +{ + if (__sd_nvic_app_accessible_irq(IRQn)) + { + NVIC_ClearPendingIRQ(IRQn); + return NRF_SUCCESS; + } + else + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } +} + +__STATIC_INLINE uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if (!__sd_nvic_app_accessible_irq(IRQn)) + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } + + if (!__sd_nvic_is_app_accessible_priority(priority)) + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED; + } + + NVIC_SetPriority(IRQn, (uint32_t)priority); + return NRF_SUCCESS; +} + +__STATIC_INLINE uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority) +{ + if (__sd_nvic_app_accessible_irq(IRQn)) + { + *p_priority = (NVIC_GetPriority(IRQn) & 0xFF); + return NRF_SUCCESS; + } + else + { + return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; + } +} + +__STATIC_INLINE uint32_t sd_nvic_SystemReset(void) +{ + NVIC_SystemReset(); + return NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN; +} + +__STATIC_INLINE uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region) +{ + int was_masked = __sd_nvic_irq_disable(); + if (!nrf_nvic_state.__cr_flag) + { + nrf_nvic_state.__cr_flag = 1; + nrf_nvic_state.__irq_masks[0] = ( NVIC->ICER[0] & __NRF_NVIC_APP_IRQS_0 ); + NVIC->ICER[0] = __NRF_NVIC_APP_IRQS_0; + nrf_nvic_state.__irq_masks[1] = ( NVIC->ICER[1] & __NRF_NVIC_APP_IRQS_1 ); + NVIC->ICER[1] = __NRF_NVIC_APP_IRQS_1; + *p_is_nested_critical_region = 0; + } + else + { + *p_is_nested_critical_region = 1; + } + if (!was_masked) + { + __sd_nvic_irq_enable(); + } + return NRF_SUCCESS; +} + +__STATIC_INLINE uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region) +{ + if (nrf_nvic_state.__cr_flag && (is_nested_critical_region == 0)) + { + int was_masked = __sd_nvic_irq_disable(); + NVIC->ISER[0] = nrf_nvic_state.__irq_masks[0]; + NVIC->ISER[1] = nrf_nvic_state.__irq_masks[1]; + nrf_nvic_state.__cr_flag = 0; + if (!was_masked) + { + __sd_nvic_irq_enable(); + } + } + + return NRF_SUCCESS; +} + +#endif /* SUPPRESS_INLINE_IMPLEMENTATION */ + +#ifdef __cplusplus +} +#endif + +#endif // NRF_NVIC_H__ + +/**@} */ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_sd_def.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_sd_def.h new file mode 100644 index 0000000000..c9ab241872 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_sd_def.h @@ -0,0 +1,59 @@ +/** + * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef NRF_SD_DEF_H__ +#define NRF_SD_DEF_H__ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define SD_PPI_CHANNELS_USED 0xFFFE0000uL /**< PPI channels utilized by SotfDevice (not available to the application). */ +#define SD_PPI_GROUPS_USED 0x0000000CuL /**< PPI groups utilized by SoftDevice (not available to the application). */ +#define SD_TIMERS_USED 0x00000001uL /**< Timers used by SoftDevice. */ +#define SD_SWI_USED 0x0000003CuL /**< Software interrupts used by SoftDevice */ + + +#ifdef __cplusplus +} +#endif + +#endif /* NRF_SD_DEF_H__ */ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_sdm.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_sdm.h new file mode 100644 index 0000000000..8c48d93678 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_sdm.h @@ -0,0 +1,358 @@ +/* + * Copyright (c) 2015 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @defgroup nrf_sdm_api SoftDevice Manager API + @{ + + @brief APIs for SoftDevice management. + +*/ + +#ifndef NRF_SDM_H__ +#define NRF_SDM_H__ + +#include +#include "nrf.h" +#include "nrf_svc.h" +#include "nrf_error.h" +#include "nrf_error_sdm.h" +#include "nrf_soc.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup NRF_SDM_DEFINES Defines + * @{ */ +#ifdef NRFSOC_DOXYGEN +/// Declared in nrf_mbr.h +#define MBR_SIZE 0 +#warning test +#endif + +/** @brief The major version for the SoftDevice binary distributed with this header file. */ +#define SD_MAJOR_VERSION (6) + +/** @brief The minor version for the SoftDevice binary distributed with this header file. */ +#define SD_MINOR_VERSION (0) + +/** @brief The bugfix version for the SoftDevice binary distributed with this header file. */ +#define SD_BUGFIX_VERSION (0) + +/** @brief The full version number for the SoftDevice binary this header file was distributed + * with, as a decimal number in the form Mmmmbbb, where: + * - M is major version (one or more digits) + * - mmm is minor version (three digits) + * - bbb is bugfix version (three digits). */ +#define SD_VERSION (SD_MAJOR_VERSION * 1000000 + SD_MINOR_VERSION * 1000 + SD_BUGFIX_VERSION) + +/** @brief SoftDevice Manager SVC Base number. */ +#define SDM_SVC_BASE 0x10 + +/** @brief SoftDevice unique string size in bytes. */ +#define SD_UNIQUE_STR_SIZE 20 + +/** @brief Invalid info field. Returned when an info field does not exist. */ +#define SDM_INFO_FIELD_INVALID (0) + +/** @brief Defines the SoftDevice Information Structure location (address) as an offset from +the start of the SoftDevice (without MBR)*/ +#define SOFTDEVICE_INFO_STRUCT_OFFSET (0x2000) + +/** @brief Defines the absolute SoftDevice Information Structure location (address) when the + * SoftDevice is installed just above the MBR (the usual case). */ +#define SOFTDEVICE_INFO_STRUCT_ADDRESS (SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE) + +/** @brief Defines the offset for the SoftDevice Information Structure size value relative to the + * SoftDevice base address. The size value is of type uint8_t. */ +#define SD_INFO_STRUCT_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET) + +/** @brief Defines the offset for the SoftDevice size value relative to the SoftDevice base address. + * The size value is of type uint32_t. */ +#define SD_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x08) + +/** @brief Defines the offset for FWID value relative to the SoftDevice base address. The FWID value + * is of type uint16_t. */ +#define SD_FWID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x0C) + +/** @brief Defines the offset for the SoftDevice ID relative to the SoftDevice base address. The ID + * is of type uint32_t. */ +#define SD_ID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10) + +/** @brief Defines the offset for the SoftDevice version relative to the SoftDevice base address in + * the same format as @ref SD_VERSION, stored as an uint32_t. */ +#define SD_VERSION_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14) + +/** @brief Defines the offset for the SoftDevice unique string relative to the SoftDevice base address. + * The SD_UNIQUE_STR is stored as an array of uint8_t. The size of array is @ref SD_UNIQUE_STR_SIZE. + */ +#define SD_UNIQUE_STR_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x18) + +/** @brief Defines a macro for retrieving the actual SoftDevice Information Structure size value + * from a given base address. Use @ref MBR_SIZE as the argument when the SoftDevice is + * installed just above the MBR (the usual case). */ +#define SD_INFO_STRUCT_SIZE_GET(baseaddr) (*((uint8_t *) ((baseaddr) + SD_INFO_STRUCT_SIZE_OFFSET))) + +/** @brief Defines a macro for retrieving the actual SoftDevice size value from a given base + * address. Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above + * the MBR (the usual case). */ +#define SD_SIZE_GET(baseaddr) (*((uint32_t *) ((baseaddr) + SD_SIZE_OFFSET))) + +/** @brief Defines a macro for retrieving the actual FWID value from a given base address. Use + * @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR (the usual + * case). */ +#define SD_FWID_GET(baseaddr) (*((uint16_t *) ((baseaddr) + SD_FWID_OFFSET))) + +/** @brief Defines a macro for retrieving the actual SoftDevice ID from a given base address. Use + * @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR (the + * usual case). */ +#define SD_ID_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \ + ? (*((uint32_t *) ((baseaddr) + SD_ID_OFFSET))) : SDM_INFO_FIELD_INVALID) + +/** @brief Defines a macro for retrieving the actual SoftDevice version from a given base address. + * Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR + * (the usual case). */ +#define SD_VERSION_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \ + ? (*((uint32_t *) ((baseaddr) + SD_VERSION_OFFSET))) : SDM_INFO_FIELD_INVALID) + +/** @brief Defines a macro for retrieving the address of SoftDevice unique str based on a given base address. + * Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR + * (the usual case). */ +#define SD_UNIQUE_STR_ADDR_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_UNIQUE_STR_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \ + ? (((uint8_t *) ((baseaddr) + SD_UNIQUE_STR_OFFSET))) : SDM_INFO_FIELD_INVALID) + +/**@defgroup NRF_FAULT_ID_RANGES Fault ID ranges + * @{ */ +#define NRF_FAULT_ID_SD_RANGE_START 0x00000000 /**< SoftDevice ID range start. */ +#define NRF_FAULT_ID_APP_RANGE_START 0x00001000 /**< Application ID range start. */ +/**@} */ + +/**@defgroup NRF_FAULT_IDS Fault ID types + * @{ */ +#define NRF_FAULT_ID_SD_ASSERT (NRF_FAULT_ID_SD_RANGE_START + 1) /**< SoftDevice assertion. The info parameter is reserved for future used. */ +#define NRF_FAULT_ID_APP_MEMACC (NRF_FAULT_ID_APP_RANGE_START + 1) /**< Application invalid memory access. The info parameter will contain 0x00000000, + in case of SoftDevice RAM access violation. In case of SoftDevice peripheral + register violation the info parameter will contain the sub-region number of + PREGION[0], on whose address range the disallowed write access caused the + memory access fault. */ +/**@} */ + +/** @} */ + +/** @addtogroup NRF_SDM_ENUMS Enumerations + * @{ */ + +/**@brief nRF SoftDevice Manager API SVC numbers. */ +enum NRF_SD_SVCS +{ + SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */ + SD_SOFTDEVICE_DISABLE, /**< ::sd_softdevice_disable */ + SD_SOFTDEVICE_IS_ENABLED, /**< ::sd_softdevice_is_enabled */ + SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, /**< ::sd_softdevice_vector_table_base_set */ + SVC_SDM_LAST /**< Placeholder for last SDM SVC */ +}; + +/** @} */ + +/** @addtogroup NRF_SDM_DEFINES Defines + * @{ */ + +/**@defgroup NRF_CLOCK_LF_ACCURACY Clock accuracy + * @{ */ + +#define NRF_CLOCK_LF_ACCURACY_250_PPM (0) /**< Default: 250 ppm */ +#define NRF_CLOCK_LF_ACCURACY_500_PPM (1) /**< 500 ppm */ +#define NRF_CLOCK_LF_ACCURACY_150_PPM (2) /**< 150 ppm */ +#define NRF_CLOCK_LF_ACCURACY_100_PPM (3) /**< 100 ppm */ +#define NRF_CLOCK_LF_ACCURACY_75_PPM (4) /**< 75 ppm */ +#define NRF_CLOCK_LF_ACCURACY_50_PPM (5) /**< 50 ppm */ +#define NRF_CLOCK_LF_ACCURACY_30_PPM (6) /**< 30 ppm */ +#define NRF_CLOCK_LF_ACCURACY_20_PPM (7) /**< 20 ppm */ +#define NRF_CLOCK_LF_ACCURACY_10_PPM (8) /**< 10 ppm */ +#define NRF_CLOCK_LF_ACCURACY_5_PPM (9) /**< 5 ppm */ +#define NRF_CLOCK_LF_ACCURACY_2_PPM (10) /**< 2 ppm */ +#define NRF_CLOCK_LF_ACCURACY_1_PPM (11) /**< 1 ppm */ + +/** @} */ + +/**@defgroup NRF_CLOCK_LF_SRC Possible LFCLK oscillator sources + * @{ */ + +#define NRF_CLOCK_LF_SRC_RC (0) /**< LFCLK RC oscillator. */ +#define NRF_CLOCK_LF_SRC_XTAL (1) /**< LFCLK crystal oscillator. */ +#define NRF_CLOCK_LF_SRC_SYNTH (2) /**< LFCLK Synthesized from HFCLK. */ + +/** @} */ + +/** @} */ + +/** @addtogroup NRF_SDM_TYPES Types + * @{ */ + +/**@brief Type representing LFCLK oscillator source. */ +typedef struct +{ + uint8_t source; /**< LF oscillator clock source, see @ref NRF_CLOCK_LF_SRC. */ + uint8_t rc_ctiv; /**< Only for ::NRF_CLOCK_LF_SRC_RC: Calibration timer interval in 1/4 second + units (nRF52: 1-32). + @note To avoid excessive clock drift, 0.5 degrees Celsius is the + maximum temperature change allowed in one calibration timer + interval. The interval should be selected to ensure this. + + @note Must be 0 if source is not ::NRF_CLOCK_LF_SRC_RC. */ + uint8_t rc_temp_ctiv; /**< Only for ::NRF_CLOCK_LF_SRC_RC: How often (in number of calibration + intervals) the RC oscillator shall be calibrated if the temperature + hasn't changed. + 0: Always calibrate even if the temperature hasn't changed. + 1: Only calibrate if the temperature has changed (legacy - nRF51 only). + 2-33: Check the temperature and only calibrate if it has changed, + however calibration will take place every rc_temp_ctiv + intervals in any case. + + @note Must be 0 if source is not ::NRF_CLOCK_LF_SRC_RC. + + @note For nRF52, the application must ensure calibration at least once + every 8 seconds to ensure +/-500 ppm clock stability. The + recommended configuration for ::NRF_CLOCK_LF_SRC_RC on nRF52 is + rc_ctiv=16 and rc_temp_ctiv=2. This will ensure calibration at + least once every 8 seconds and for temperature changes of 0.5 + degrees Celsius every 4 seconds. See the Product Specification + for the nRF52 device being used for more information.*/ + uint8_t accuracy; /**< External clock accuracy used in the LL to compute timing + windows, see @ref NRF_CLOCK_LF_ACCURACY.*/ +} nrf_clock_lf_cfg_t; + +/**@brief Fault Handler type. + * + * When certain unrecoverable errors occur within the application or SoftDevice the fault handler will be called back. + * The protocol stack will be in an undefined state when this happens and the only way to recover will be to + * perform a reset, using e.g. CMSIS NVIC_SystemReset(). + * If the application returns from the fault handler the SoftDevice will call NVIC_SystemReset(). + * + * @note This callback is executed in HardFault context, thus SVC functions cannot be called from the fault callback. + * + * @param[in] id Fault identifier. See @ref NRF_FAULT_IDS. + * @param[in] pc The program counter of the instruction that triggered the fault. + * @param[in] info Optional additional information regarding the fault. Refer to each Fault identifier for details. + * + * @note When id is set to @ref NRF_FAULT_ID_APP_MEMACC, pc will contain the address of the instruction being executed at the time when + * the fault is detected by the CPU. The CPU program counter may have advanced up to 2 instructions (no branching) after the one that triggered the fault. + */ +typedef void (*nrf_fault_handler_t)(uint32_t id, uint32_t pc, uint32_t info); + +/** @} */ + +/** @addtogroup NRF_SDM_FUNCTIONS Functions + * @{ */ + +/**@brief Enables the SoftDevice and by extension the protocol stack. + * + * @note Some care must be taken if a low frequency clock source is already running when calling this function: + * If the LF clock has a different source then the one currently running, it will be stopped. Then, the new + * clock source will be started. + * + * @note This function has no effect when returning with an error. + * + * @post If return code is ::NRF_SUCCESS + * - SoC library and protocol stack APIs are made available. + * - A portion of RAM will be unavailable (see relevant SDS documentation). + * - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation). + * - Interrupts will not arrive from protected peripherals or interrupts. + * - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the SoftDevice. + * - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation). + * - Chosen low frequency clock source will be running. + * + * @param p_clock_lf_cfg Low frequency clock source and accuracy. + If NULL the clock will be configured as an RC source with rc_ctiv = 16 and .rc_temp_ctiv = 2 + In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock. + * @param fault_handler Callback to be invoked in case of fault, cannot be NULL. + * + * @retval ::NRF_SUCCESS + * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. + * @retval ::NRF_ERROR_INVALID_STATE SoftDevice is already enabled, and the clock source and fault handler cannot be updated. + * @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDevice interrupt is already enabled, or an enabled interrupt has an illegal priority level. + * @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected. + * @retval ::NRF_ERROR_INVALID_PARAM Invalid clock source configuration supplied in p_clock_lf_cfg. + */ +SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lf_cfg_t const * p_clock_lf_cfg, nrf_fault_handler_t fault_handler)); + + +/**@brief Disables the SoftDevice and by extension the protocol stack. + * + * Idempotent function to disable the SoftDevice. + * + * @post SoC library and protocol stack APIs are made unavailable. + * @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest). + * @post All peripherals used by the SoftDevice will be reset to default values. + * @post All of RAM become available. + * @post All interrupts are forwarded to the application. + * @post LFCLK source chosen in ::sd_softdevice_enable will be left running. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void)); + +/**@brief Check if the SoftDevice is enabled. + * + * @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled)); + +/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice + * + * This function is only intended to be called when a bootloader is enabled. + * + * @param[in] address The base address of the interrupt vector table for forwarded interrupts. + + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, uint32_t, sd_softdevice_vector_table_base_set(uint32_t address)); + +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // NRF_SDM_H__ + +/** + @} +*/ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_soc.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_soc.h new file mode 100644 index 0000000000..2c4d958750 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_soc.h @@ -0,0 +1,964 @@ +/* + * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @defgroup nrf_soc_api SoC Library API + * @{ + * + * @brief APIs for the SoC library. + * + */ + +#ifndef NRF_SOC_H__ +#define NRF_SOC_H__ + +#include +#include "nrf.h" +#include "nrf_svc.h" +#include "nrf_error.h" +#include "nrf_error_soc.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@addtogroup NRF_SOC_DEFINES Defines + * @{ */ + +/**@brief The number of the lowest SVC number reserved for the SoC library. */ +#define SOC_SVC_BASE (0x20) /**< Base value for SVCs that are available when the SoftDevice is disabled. */ +#define SOC_SVC_BASE_NOT_AVAILABLE (0x2C) /**< Base value for SVCs that are not available when the SoftDevice is disabled. */ + +/**@brief Guaranteed time for application to process radio inactive notification. */ +#define NRF_RADIO_NOTIFICATION_INACTIVE_GUARANTEED_TIME_US (62) + +/**@brief The minimum allowed timeslot extension time. */ +#define NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US (200) + +/**@brief The maximum processing time to handle a timeslot extension. */ +#define NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US (17) + +/**@brief The latest time before the end of a timeslot the timeslot can be extended. */ +#define NRF_RADIO_MIN_EXTENSION_MARGIN_US (79) + +#define SOC_ECB_KEY_LENGTH (16) /**< ECB key length. */ +#define SOC_ECB_CLEARTEXT_LENGTH (16) /**< ECB cleartext length. */ +#define SOC_ECB_CIPHERTEXT_LENGTH (SOC_ECB_CLEARTEXT_LENGTH) /**< ECB ciphertext length. */ + +#define SD_EVT_IRQn (SWI2_IRQn) /**< SoftDevice Event IRQ number. Used for both protocol events and SoC events. */ +#define SD_EVT_IRQHandler (SWI2_IRQHandler) /**< SoftDevice Event IRQ handler. Used for both protocol events and SoC events. + The default interrupt priority for this handler is set to 4 */ +#define RADIO_NOTIFICATION_IRQn (SWI1_IRQn) /**< The radio notification IRQ number. */ +#define RADIO_NOTIFICATION_IRQHandler (SWI1_IRQHandler) /**< The radio notification IRQ handler. + The default interrupt priority for this handler is set to 4 */ +#define NRF_RADIO_LENGTH_MIN_US (100) /**< The shortest allowed radio timeslot, in microseconds. */ +#define NRF_RADIO_LENGTH_MAX_US (100000) /**< The longest allowed radio timeslot, in microseconds. */ + +#define NRF_RADIO_DISTANCE_MAX_US (128000000UL - 1UL) /**< The longest timeslot distance, in microseconds, allowed for the distance parameter (see @ref nrf_radio_request_normal_t) in the request. */ + +#define NRF_RADIO_EARLIEST_TIMEOUT_MAX_US (128000000UL - 1UL) /**< The longest timeout, in microseconds, allowed when requesting the earliest possible timeslot. */ + +#define NRF_RADIO_START_JITTER_US (2) /**< The maximum jitter in @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START relative to the requested start time. */ + +/**@} */ + +/**@addtogroup NRF_SOC_ENUMS Enumerations + * @{ */ + +/**@brief The SVC numbers used by the SVC functions in the SoC library. */ +enum NRF_SOC_SVCS +{ + SD_PPI_CHANNEL_ENABLE_GET = SOC_SVC_BASE, + SD_PPI_CHANNEL_ENABLE_SET = SOC_SVC_BASE + 1, + SD_PPI_CHANNEL_ENABLE_CLR = SOC_SVC_BASE + 2, + SD_PPI_CHANNEL_ASSIGN = SOC_SVC_BASE + 3, + SD_PPI_GROUP_TASK_ENABLE = SOC_SVC_BASE + 4, + SD_PPI_GROUP_TASK_DISABLE = SOC_SVC_BASE + 5, + SD_PPI_GROUP_ASSIGN = SOC_SVC_BASE + 6, + SD_PPI_GROUP_GET = SOC_SVC_BASE + 7, + SD_FLASH_PAGE_ERASE = SOC_SVC_BASE + 8, + SD_FLASH_WRITE = SOC_SVC_BASE + 9, + SD_FLASH_PROTECT = SOC_SVC_BASE + 10, + SD_PROTECTED_REGISTER_WRITE = SOC_SVC_BASE + 11, + SD_MUTEX_NEW = SOC_SVC_BASE_NOT_AVAILABLE, + SD_MUTEX_ACQUIRE = SOC_SVC_BASE_NOT_AVAILABLE + 1, + SD_MUTEX_RELEASE = SOC_SVC_BASE_NOT_AVAILABLE + 2, + SD_RAND_APPLICATION_POOL_CAPACITY_GET = SOC_SVC_BASE_NOT_AVAILABLE + 3, + SD_RAND_APPLICATION_BYTES_AVAILABLE_GET = SOC_SVC_BASE_NOT_AVAILABLE + 4, + SD_RAND_APPLICATION_VECTOR_GET = SOC_SVC_BASE_NOT_AVAILABLE + 5, + SD_POWER_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 6, + SD_POWER_SYSTEM_OFF = SOC_SVC_BASE_NOT_AVAILABLE + 7, + SD_POWER_RESET_REASON_GET = SOC_SVC_BASE_NOT_AVAILABLE + 8, + SD_POWER_RESET_REASON_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 9, + SD_POWER_POF_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 10, + SD_POWER_POF_THRESHOLD_SET = SOC_SVC_BASE_NOT_AVAILABLE + 11, + SD_POWER_RAM_POWER_SET = SOC_SVC_BASE_NOT_AVAILABLE + 13, + SD_POWER_RAM_POWER_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 14, + SD_POWER_RAM_POWER_GET = SOC_SVC_BASE_NOT_AVAILABLE + 15, + SD_POWER_GPREGRET_SET = SOC_SVC_BASE_NOT_AVAILABLE + 16, + SD_POWER_GPREGRET_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 17, + SD_POWER_GPREGRET_GET = SOC_SVC_BASE_NOT_AVAILABLE + 18, + SD_POWER_DCDC_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 19, + SD_APP_EVT_WAIT = SOC_SVC_BASE_NOT_AVAILABLE + 21, + SD_CLOCK_HFCLK_REQUEST = SOC_SVC_BASE_NOT_AVAILABLE + 22, + SD_CLOCK_HFCLK_RELEASE = SOC_SVC_BASE_NOT_AVAILABLE + 23, + SD_CLOCK_HFCLK_IS_RUNNING = SOC_SVC_BASE_NOT_AVAILABLE + 24, + SD_RADIO_NOTIFICATION_CFG_SET = SOC_SVC_BASE_NOT_AVAILABLE + 25, + SD_ECB_BLOCK_ENCRYPT = SOC_SVC_BASE_NOT_AVAILABLE + 26, + SD_ECB_BLOCKS_ENCRYPT = SOC_SVC_BASE_NOT_AVAILABLE + 27, + SD_RADIO_SESSION_OPEN = SOC_SVC_BASE_NOT_AVAILABLE + 28, + SD_RADIO_SESSION_CLOSE = SOC_SVC_BASE_NOT_AVAILABLE + 29, + SD_RADIO_REQUEST = SOC_SVC_BASE_NOT_AVAILABLE + 30, + SD_EVT_GET = SOC_SVC_BASE_NOT_AVAILABLE + 31, + SD_TEMP_GET = SOC_SVC_BASE_NOT_AVAILABLE + 32, + SVC_SOC_LAST = SOC_SVC_BASE_NOT_AVAILABLE + 37 +}; + +/**@brief Possible values of a ::nrf_mutex_t. */ +enum NRF_MUTEX_VALUES +{ + NRF_MUTEX_FREE, + NRF_MUTEX_TAKEN +}; + +/**@brief Power modes. */ +enum NRF_POWER_MODES +{ + NRF_POWER_MODE_CONSTLAT, /**< Constant latency mode. See power management in the reference manual. */ + NRF_POWER_MODE_LOWPWR /**< Low power mode. See power management in the reference manual. */ +}; + + +/**@brief Power failure thresholds */ +enum NRF_POWER_THRESHOLDS +{ + NRF_POWER_THRESHOLD_V17 = 4UL, /**< 1.7 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V18, /**< 1.8 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V19, /**< 1.9 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V20, /**< 2.0 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V21, /**< 2.1 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V22, /**< 2.2 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V23, /**< 2.3 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V24, /**< 2.4 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V25, /**< 2.5 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V26, /**< 2.6 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V27, /**< 2.7 Volts power failure threshold. */ + NRF_POWER_THRESHOLD_V28 /**< 2.8 Volts power failure threshold. */ +}; + + + +/**@brief DC/DC converter modes. */ +enum NRF_POWER_DCDC_MODES +{ + NRF_POWER_DCDC_DISABLE, /**< The DCDC is disabled. */ + NRF_POWER_DCDC_ENABLE /**< The DCDC is enabled. */ +}; + +/**@brief Radio notification distances. */ +enum NRF_RADIO_NOTIFICATION_DISTANCES +{ + NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0, /**< The event does not have a notification. */ + NRF_RADIO_NOTIFICATION_DISTANCE_800US, /**< The distance from the active notification to start of radio activity. */ + NRF_RADIO_NOTIFICATION_DISTANCE_1740US, /**< The distance from the active notification to start of radio activity. */ + NRF_RADIO_NOTIFICATION_DISTANCE_2680US, /**< The distance from the active notification to start of radio activity. */ + NRF_RADIO_NOTIFICATION_DISTANCE_3620US, /**< The distance from the active notification to start of radio activity. */ + NRF_RADIO_NOTIFICATION_DISTANCE_4560US, /**< The distance from the active notification to start of radio activity. */ + NRF_RADIO_NOTIFICATION_DISTANCE_5500US /**< The distance from the active notification to start of radio activity. */ +}; + + +/**@brief Radio notification types. */ +enum NRF_RADIO_NOTIFICATION_TYPES +{ + NRF_RADIO_NOTIFICATION_TYPE_NONE = 0, /**< The event does not have a radio notification signal. */ + NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE, /**< Using interrupt for notification when the radio will be enabled. */ + NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE, /**< Using interrupt for notification when the radio has been disabled. */ + NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH, /**< Using interrupt for notification both when the radio will be enabled and disabled. */ +}; + +/**@brief The Radio signal callback types. */ +enum NRF_RADIO_CALLBACK_SIGNAL_TYPE +{ + NRF_RADIO_CALLBACK_SIGNAL_TYPE_START, /**< This signal indicates the start of the radio timeslot. */ + NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0, /**< This signal indicates the NRF_TIMER0 interrupt. */ + NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO, /**< This signal indicates the NRF_RADIO interrupt. */ + NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED, /**< This signal indicates extend action failed. */ + NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED /**< This signal indicates extend action succeeded. */ +}; + +/**@brief The actions requested by the signal callback. + * + * This code gives the SOC instructions about what action to take when the signal callback has + * returned. + */ +enum NRF_RADIO_SIGNAL_CALLBACK_ACTION +{ + NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE, /**< Return without action. */ + NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND, /**< Request an extension of the current + timeslot. Maximum execution time for this action: + @ref NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US. + This action must be started at least + @ref NRF_RADIO_MIN_EXTENSION_MARGIN_US before + the end of the timeslot. */ + NRF_RADIO_SIGNAL_CALLBACK_ACTION_END, /**< End the current radio timeslot. */ + NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END /**< Request a new radio timeslot and end the current timeslot. */ +}; + +/**@brief Radio timeslot high frequency clock source configuration. */ +enum NRF_RADIO_HFCLK_CFG +{ + NRF_RADIO_HFCLK_CFG_XTAL_GUARANTEED, /**< The SoftDevice will guarantee that the high frequency clock source is the + external crystal for the whole duration of the timeslot. This should be the + preferred option for events that use the radio or require high timing accuracy. + @note The SoftDevice will automatically turn on and off the external crystal, + at the beginning and end of the timeslot, respectively. The crystal may also + intentionally be left running after the timeslot, in cases where it is needed + by the SoftDevice shortly after the end of the timeslot. */ + NRF_RADIO_HFCLK_CFG_NO_GUARANTEE /**< This configuration allows for earlier and tighter scheduling of timeslots. + The RC oscillator may be the clock source in part or for the whole duration of the timeslot. + The RC oscillator's accuracy must therefore be taken into consideration. + @note If the application will use the radio peripheral in timeslots with this configuration, + it must make sure that the crystal is running and stable before starting the radio. */ +}; + +/**@brief Radio timeslot priorities. */ +enum NRF_RADIO_PRIORITY +{ + NRF_RADIO_PRIORITY_HIGH, /**< High (equal priority as the normal connection priority of the SoftDevice stack(s)). */ + NRF_RADIO_PRIORITY_NORMAL, /**< Normal (equal priority as the priority of secondary activities of the SoftDevice stack(s)). */ +}; + +/**@brief Radio timeslot request type. */ +enum NRF_RADIO_REQUEST_TYPE +{ + NRF_RADIO_REQ_TYPE_EARLIEST, /**< Request radio timeslot as early as possible. This should always be used for the first request in a session. */ + NRF_RADIO_REQ_TYPE_NORMAL /**< Normal radio timeslot request. */ +}; + +/**@brief SoC Events. */ +enum NRF_SOC_EVTS +{ + NRF_EVT_HFCLKSTARTED, /**< Event indicating that the HFCLK has started. */ + NRF_EVT_POWER_FAILURE_WARNING, /**< Event indicating that a power failure warning has occurred. */ + NRF_EVT_FLASH_OPERATION_SUCCESS, /**< Event indicating that the ongoing flash operation has completed successfully. */ + NRF_EVT_FLASH_OPERATION_ERROR, /**< Event indicating that the ongoing flash operation has timed out with an error. */ + NRF_EVT_RADIO_BLOCKED, /**< Event indicating that a radio timeslot was blocked. */ + NRF_EVT_RADIO_CANCELED, /**< Event indicating that a radio timeslot was canceled by SoftDevice. */ + NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN, /**< Event indicating that a radio timeslot signal callback handler return was invalid. */ + NRF_EVT_RADIO_SESSION_IDLE, /**< Event indicating that a radio timeslot session is idle. */ + NRF_EVT_RADIO_SESSION_CLOSED, /**< Event indicating that a radio timeslot session is closed. */ + NRF_EVT_NUMBER_OF_EVTS +}; + +/**@} */ + + +/**@addtogroup NRF_SOC_STRUCTURES Structures + * @{ */ + +/**@brief Represents a mutex for use with the nrf_mutex functions. + * @note Accessing the value directly is not safe, use the mutex functions! + */ +typedef volatile uint8_t nrf_mutex_t; + +/**@brief Parameters for a request for a timeslot as early as possible. */ +typedef struct +{ + uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */ + uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */ + uint32_t length_us; /**< The radio timeslot length (in the range 100 to 100,000] microseconds). */ + uint32_t timeout_us; /**< Longest acceptable delay until the start of the requested timeslot (up to @ref NRF_RADIO_EARLIEST_TIMEOUT_MAX_US microseconds). */ +} nrf_radio_request_earliest_t; + +/**@brief Parameters for a normal radio timeslot request. */ +typedef struct +{ + uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */ + uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */ + uint32_t distance_us; /**< Distance from the start of the previous radio timeslot (up to @ref NRF_RADIO_DISTANCE_MAX_US microseconds). */ + uint32_t length_us; /**< The radio timeslot length (in the range [100..100,000] microseconds). */ +} nrf_radio_request_normal_t; + +/**@brief Radio timeslot request parameters. */ +typedef struct +{ + uint8_t request_type; /**< Type of request, see @ref NRF_RADIO_REQUEST_TYPE. */ + union + { + nrf_radio_request_earliest_t earliest; /**< Parameters for requesting a radio timeslot as early as possible. */ + nrf_radio_request_normal_t normal; /**< Parameters for requesting a normal radio timeslot. */ + } params; /**< Parameter union. */ +} nrf_radio_request_t; + +/**@brief Return parameters of the radio timeslot signal callback. */ +typedef struct +{ + uint8_t callback_action; /**< The action requested by the application when returning from the signal callback, see @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION. */ + union + { + struct + { + nrf_radio_request_t * p_next; /**< The request parameters for the next radio timeslot. */ + } request; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END. */ + struct + { + uint32_t length_us; /**< Requested extension of the radio timeslot duration (microseconds) (for minimum time see @ref NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US). */ + } extend; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND. */ + } params; /**< Parameter union. */ +} nrf_radio_signal_callback_return_param_t; + +/**@brief The radio timeslot signal callback type. + * + * @note In case of invalid return parameters, the radio timeslot will automatically end + * immediately after returning from the signal callback and the + * @ref NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN event will be sent. + * @note The returned struct pointer must remain valid after the signal callback + * function returns. For instance, this means that it must not point to a stack variable. + * + * @param[in] signal_type Type of signal, see @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE. + * + * @return Pointer to structure containing action requested by the application. + */ +typedef nrf_radio_signal_callback_return_param_t * (*nrf_radio_signal_callback_t) (uint8_t signal_type); + +/**@brief AES ECB parameter typedefs */ +typedef uint8_t soc_ecb_key_t[SOC_ECB_KEY_LENGTH]; /**< Encryption key type. */ +typedef uint8_t soc_ecb_cleartext_t[SOC_ECB_CLEARTEXT_LENGTH]; /**< Cleartext data type. */ +typedef uint8_t soc_ecb_ciphertext_t[SOC_ECB_CIPHERTEXT_LENGTH]; /**< Ciphertext data type. */ + +/**@brief AES ECB data structure */ +typedef struct +{ + soc_ecb_key_t key; /**< Encryption key. */ + soc_ecb_cleartext_t cleartext; /**< Cleartext data. */ + soc_ecb_ciphertext_t ciphertext; /**< Ciphertext data. */ +} nrf_ecb_hal_data_t; + +/**@brief AES ECB block. Used to provide multiple blocks in a single call + to @ref sd_ecb_blocks_encrypt.*/ +typedef struct +{ + soc_ecb_key_t const * p_key; /**< Pointer to the Encryption key. */ + soc_ecb_cleartext_t const * p_cleartext; /**< Pointer to the Cleartext data. */ + soc_ecb_ciphertext_t * p_ciphertext; /**< Pointer to the Ciphertext data. */ +} nrf_ecb_hal_data_block_t; + +/**@} */ + +/**@addtogroup NRF_SOC_FUNCTIONS Functions + * @{ */ + +/**@brief Initialize a mutex. + * + * @param[in] p_mutex Pointer to the mutex to initialize. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_MUTEX_NEW, uint32_t, sd_mutex_new(nrf_mutex_t * p_mutex)); + +/**@brief Attempt to acquire a mutex. + * + * @param[in] p_mutex Pointer to the mutex to acquire. + * + * @retval ::NRF_SUCCESS The mutex was successfully acquired. + * @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired. + */ +SVCALL(SD_MUTEX_ACQUIRE, uint32_t, sd_mutex_acquire(nrf_mutex_t * p_mutex)); + +/**@brief Release a mutex. + * + * @param[in] p_mutex Pointer to the mutex to release. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_MUTEX_RELEASE, uint32_t, sd_mutex_release(nrf_mutex_t * p_mutex)); + +/**@brief Query the capacity of the application random pool. + * + * @param[out] p_pool_capacity The capacity of the pool. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_RAND_APPLICATION_POOL_CAPACITY_GET, uint32_t, sd_rand_application_pool_capacity_get(uint8_t * p_pool_capacity)); + +/**@brief Get number of random bytes available to the application. + * + * @param[out] p_bytes_available The number of bytes currently available in the pool. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_RAND_APPLICATION_BYTES_AVAILABLE_GET, uint32_t, sd_rand_application_bytes_available_get(uint8_t * p_bytes_available)); + +/**@brief Get random bytes from the application pool. + * + * @param[out] p_buff Pointer to unit8_t buffer for storing the bytes. + * @param[in] length Number of bytes to take from pool and place in p_buff. + * + * @retval ::NRF_SUCCESS The requested bytes were written to p_buff. + * @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available. +*/ +SVCALL(SD_RAND_APPLICATION_VECTOR_GET, uint32_t, sd_rand_application_vector_get(uint8_t * p_buff, uint8_t length)); + +/**@brief Gets the reset reason register. + * + * @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_RESET_REASON_GET, uint32_t, sd_power_reset_reason_get(uint32_t * p_reset_reason)); + +/**@brief Clears the bits of the reset reason register. + * + * @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_RESET_REASON_CLR, uint32_t, sd_power_reset_reason_clr(uint32_t reset_reason_clr_msk)); + +/**@brief Sets the power mode when in CPU sleep. + * + * @param[in] power_mode The power mode to use when in CPU sleep, see @ref NRF_POWER_MODES. @sa sd_app_evt_wait + * + * @retval ::NRF_SUCCESS The power mode was set. + * @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown. + */ +SVCALL(SD_POWER_MODE_SET, uint32_t, sd_power_mode_set(uint8_t power_mode)); + +/**@brief Puts the chip in System OFF mode. + * + * @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN + */ +SVCALL(SD_POWER_SYSTEM_OFF, uint32_t, sd_power_system_off(void)); + +/**@brief Enables or disables the power-fail comparator. + * + * Enabling this will give a SoftDevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs. + * The event can be retrieved with sd_evt_get(); + * + * @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_POF_ENABLE, uint32_t, sd_power_pof_enable(uint8_t pof_enable)); + + +/**@brief Sets the power failure comparator threshold value. + * + * + * @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDS. + * + * @retval ::NRF_SUCCESS The power failure threshold was set. + * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown. + */ +SVCALL(SD_POWER_POF_THRESHOLD_SET, uint32_t, sd_power_pof_threshold_set(uint8_t threshold)); + + +/**@brief Writes the NRF_POWER->RAM[index].POWERSET register. + * + * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERSET register to write to. + * @param[in] ram_powerset Contains the word to write to the NRF_POWER->RAM[index].POWERSET register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_RAM_POWER_SET, uint32_t, sd_power_ram_power_set(uint8_t index, uint32_t ram_powerset)); + +/**@brief Writes the NRF_POWER->RAM[index].POWERCLR register. + * + * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERCLR register to write to. + * @param[in] ram_powerclr Contains the word to write to the NRF_POWER->RAM[index].POWERCLR register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_RAM_POWER_CLR, uint32_t, sd_power_ram_power_clr(uint8_t index, uint32_t ram_powerclr)); + +/**@brief Get contents of NRF_POWER->RAM[index].POWER register, indicates power status of RAM[index] blocks. + * + * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWER register to read from. + * @param[out] p_ram_power Content of NRF_POWER->RAM[index].POWER register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_RAM_POWER_GET, uint32_t, sd_power_ram_power_get(uint8_t index, uint32_t * p_ram_power)); + +/**@brief Set bits in the general purpose retention registers (NRF_POWER->GPREGRET*). + * + * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. + * @param[in] gpregret_msk Bits to be set in the GPREGRET register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_GPREGRET_SET, uint32_t, sd_power_gpregret_set(uint32_t gpregret_id, uint32_t gpregret_msk)); + +/**@brief Clear bits in the general purpose retention registers (NRF_POWER->GPREGRET*). + * + * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. + * @param[in] gpregret_msk Bits to be clear in the GPREGRET register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_GPREGRET_CLR, uint32_t, sd_power_gpregret_clr(uint32_t gpregret_id, uint32_t gpregret_msk)); + +/**@brief Get contents of the general purpose retention registers (NRF_POWER->GPREGRET*). + * + * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. + * @param[out] p_gpregret Contents of the GPREGRET register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_POWER_GPREGRET_GET, uint32_t, sd_power_gpregret_get(uint32_t gpregret_id, uint32_t *p_gpregret)); + +/**@brief Enable or disable the DC/DC regulator. + * + * @param[in] dcdc_mode The mode of the DCDC, see @ref NRF_POWER_DCDC_MODES. + * + * @retval ::NRF_SUCCESS + * @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid. + */ +SVCALL(SD_POWER_DCDC_MODE_SET, uint32_t, sd_power_dcdc_mode_set(uint8_t dcdc_mode)); + + +/**@brief Request the high frequency crystal oscillator. + * + * Will start the high frequency crystal oscillator, the startup time of the crystal varies + * and the ::sd_clock_hfclk_is_running function can be polled to check if it has started. + * + * @see sd_clock_hfclk_is_running + * @see sd_clock_hfclk_release + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_CLOCK_HFCLK_REQUEST, uint32_t, sd_clock_hfclk_request(void)); + +/**@brief Releases the high frequency crystal oscillator. + * + * Will stop the high frequency crystal oscillator, this happens immediately. + * + * @see sd_clock_hfclk_is_running + * @see sd_clock_hfclk_request + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_CLOCK_HFCLK_RELEASE, uint32_t, sd_clock_hfclk_release(void)); + +/**@brief Checks if the high frequency crystal oscillator is running. + * + * @see sd_clock_hfclk_request + * @see sd_clock_hfclk_release + * + * @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_CLOCK_HFCLK_IS_RUNNING, uint32_t, sd_clock_hfclk_is_running(uint32_t * p_is_running)); + +/**@brief Waits for an application event. + * + * An application event is either an application interrupt or a pended interrupt when the interrupt + * is disabled. + * + * When the application waits for an application event by calling this function, an interrupt that + * is enabled will be taken immediately on pending since this function will wait in thread mode, + * then the execution will return in the application's main thread. + * + * In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M + * MCU's System Control Register (SCR), CMSIS_SCB. In that case, when a disabled interrupt gets + * pended, this function will return to the application's main thread. + * + * @note The application must ensure that the pended flag is cleared using ::sd_nvic_ClearPendingIRQ + * in order to sleep using this function. This is only necessary for disabled interrupts, as + * the interrupt handler will clear the pending flag automatically for enabled interrupts. + * + * @note If an application interrupt has happened since the last time sd_app_evt_wait was + * called this function will return immediately and not go to sleep. This is to avoid race + * conditions that can occur when a flag is updated in the interrupt handler and processed + * in the main loop. + * + * @post An application interrupt has happened or a interrupt pending flag is set. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_APP_EVT_WAIT, uint32_t, sd_app_evt_wait(void)); + +/**@brief Get PPI channel enable register contents. + * + * @param[out] p_channel_enable The contents of the PPI CHEN register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_CHANNEL_ENABLE_GET, uint32_t, sd_ppi_channel_enable_get(uint32_t * p_channel_enable)); + +/**@brief Set PPI channel enable register. + * + * @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_CHANNEL_ENABLE_SET, uint32_t, sd_ppi_channel_enable_set(uint32_t channel_enable_set_msk)); + +/**@brief Clear PPI channel enable register. + * + * @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_CHANNEL_ENABLE_CLR, uint32_t, sd_ppi_channel_enable_clr(uint32_t channel_enable_clr_msk)); + +/**@brief Assign endpoints to a PPI channel. + * + * @param[in] channel_num Number of the PPI channel to assign. + * @param[in] evt_endpoint Event endpoint of the PPI channel. + * @param[in] task_endpoint Task endpoint of the PPI channel. + * + * @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid. + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_CHANNEL_ASSIGN, uint32_t, sd_ppi_channel_assign(uint8_t channel_num, const volatile void * evt_endpoint, const volatile void * task_endpoint)); + +/**@brief Task to enable a channel group. + * + * @param[in] group_num Number of the channel group. + * + * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_GROUP_TASK_ENABLE, uint32_t, sd_ppi_group_task_enable(uint8_t group_num)); + +/**@brief Task to disable a channel group. + * + * @param[in] group_num Number of the PPI group. + * + * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_GROUP_TASK_DISABLE, uint32_t, sd_ppi_group_task_disable(uint8_t group_num)); + +/**@brief Assign PPI channels to a channel group. + * + * @param[in] group_num Number of the channel group. + * @param[in] channel_msk Mask of the channels to assign to the group. + * + * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_GROUP_ASSIGN, uint32_t, sd_ppi_group_assign(uint8_t group_num, uint32_t channel_msk)); + +/**@brief Gets the PPI channels of a channel group. + * + * @param[in] group_num Number of the channel group. + * @param[out] p_channel_msk Mask of the channels assigned to the group. + * + * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_PPI_GROUP_GET, uint32_t, sd_ppi_group_get(uint8_t group_num, uint32_t * p_channel_msk)); + +/**@brief Configures the Radio Notification signal. + * + * @note + * - The notification signal latency depends on the interrupt priority settings of SWI used + * for notification signal. + * - To ensure that the radio notification signal behaves in a consistent way, the radio + * notifications must be configured when there is no protocol stack or other SoftDevice + * activity in progress. It is recommended that the radio notification signal is + * configured directly after the SoftDevice has been enabled. + * - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice + * will interrupt the application to do Radio Event preparation. + * - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have + * to shorten the connection events to have time for the Radio Notification signals. + * + * @param[in] type Type of notification signal, see @ref NRF_RADIO_NOTIFICATION_TYPES. + * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio + * notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is + * recommended (but not required) to be used with + * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE. + * + * @param[in] distance Distance between the notification signal and start of radio activity, see @ref NRF_RADIO_NOTIFICATION_DISTANCES. + * This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or + * @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used. + * + * @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid. + * @retval ::NRF_ERROR_INVALID_STATE A protocol stack or other SoftDevice is running. Stop all + * running activities and retry. + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_RADIO_NOTIFICATION_CFG_SET, uint32_t, sd_radio_notification_cfg_set(uint8_t type, uint8_t distance)); + +/**@brief Encrypts a block according to the specified parameters. + * + * 128-bit AES encryption. + * + * @note: + * - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while + * the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application + * main or low interrupt level. + * + * @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input + * parameters and one output parameter). + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_ECB_BLOCK_ENCRYPT, uint32_t, sd_ecb_block_encrypt(nrf_ecb_hal_data_t * p_ecb_data)); + +/**@brief Encrypts multiple data blocks provided as an array of data block structures. + * + * @details: Performs 128-bit AES encryption on multiple data blocks + * + * @note: + * - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while + * the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application + * main or low interrupt level. + * + * @param[in] block_count Count of blocks in the p_data_blocks array. + * @param[in,out] p_data_blocks Pointer to the first entry in a contiguous array of + * @ref nrf_ecb_hal_data_block_t structures. + * + * @retval ::NRF_SUCCESS + */ +SVCALL(SD_ECB_BLOCKS_ENCRYPT, uint32_t, sd_ecb_blocks_encrypt(uint8_t block_count, nrf_ecb_hal_data_block_t * p_data_blocks)); + +/**@brief Gets any pending events generated by the SoC API. + * + * The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned. + * + * @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending. + * + * @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter. + * @retval ::NRF_ERROR_NOT_FOUND No pending events. + */ +SVCALL(SD_EVT_GET, uint32_t, sd_evt_get(uint32_t * p_evt_id)); + +/**@brief Get the temperature measured on the chip + * + * This function will block until the temperature measurement is done. + * It takes around 50 us from call to return. + * + * @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees Celsius. + * + * @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp + */ +SVCALL(SD_TEMP_GET, uint32_t, sd_temp_get(int32_t * p_temp)); + +/**@brief Flash Write +* +* Commands to write a buffer to flash +* +* If the SoftDevice is enabled: +* This call initiates the flash access command, and its completion will be communicated to the +* application with exactly one of the following events: +* - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed. +* - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started. +* +* If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the + * write has been completed +* +* @note +* - This call takes control over the radio and the CPU during flash erase and write to make sure that +* they will not interfere with the flash access. This means that all interrupts will be blocked +* for a predictable time (depending on the NVMC specification in the device's Product Specification +* and the command parameters). +* - The data in the p_src buffer should not be modified before the @ref NRF_EVT_FLASH_OPERATION_SUCCESS +* or the @ref NRF_EVT_FLASH_OPERATION_ERROR have been received if the SoftDevice is enabled. +* - This call will make the SoftDevice trigger a hardfault when the page is written, if it is +* protected. +* +* +* @param[in] p_dst Pointer to start of flash location to be written. +* @param[in] p_src Pointer to buffer with data to be written. +* @param[in] size Number of 32-bit words to write. Maximum size is the number of words in one +* flash page. See the device's Product Specification for details. +* +* @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned. +* @retval ::NRF_ERROR_BUSY The previous command has not yet completed. +* @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or higher than the maximum allowed size. +* @retval ::NRF_ERROR_FORBIDDEN Tried to write to an address outside the application flash area. +* @retval ::NRF_SUCCESS The command was accepted. +*/ +SVCALL(SD_FLASH_WRITE, uint32_t, sd_flash_write(uint32_t * p_dst, uint32_t const * p_src, uint32_t size)); + + +/**@brief Flash Erase page +* +* Commands to erase a flash page +* If the SoftDevice is enabled: +* This call initiates the flash access command, and its completion will be communicated to the +* application with exactly one of the following events: +* - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed. +* - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started. +* +* If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the +* erase has been completed +* +* @note +* - This call takes control over the radio and the CPU during flash erase and write to make sure that +* they will not interfere with the flash access. This means that all interrupts will be blocked +* for a predictable time (depending on the NVMC specification in the device's Product Specification +* and the command parameters). +* - This call will make the SoftDevice trigger a hardfault when the page is erased, if it is +* protected. +* +* +* @param[in] page_number Page number of the page to erase +* +* @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error. +* @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page. +* @retval ::NRF_ERROR_BUSY The previous command has not yet completed. +* @retval ::NRF_ERROR_FORBIDDEN Tried to erase a page outside the application flash area. +* @retval ::NRF_SUCCESS The command was accepted. +*/ +SVCALL(SD_FLASH_PAGE_ERASE, uint32_t, sd_flash_page_erase(uint32_t page_number)); + + +/**@brief Flash Protection set + * + * Commands to set the flash protection configuration registers. + This sets the CONFIGx registers of the BPROT peripheral. + * + * @note Not all parameters are valid for all products. Some bits in each parameter may not be + * valid for your product. Please refer your Product Specification for more details. + * + * @note To read the values read them directly. They are only write-protected. + * + * @note It is possible to use @ref sd_protected_register_write instead of this function. + * + * @param[in] block_cfg0 Value to be written to the configuration register. + * @param[in] block_cfg1 Value to be written to the configuration register. + * @param[in] block_cfg2 Value to be written to the configuration register. + * @param[in] block_cfg3 Value to be written to the configuration register. + * + * @retval ::NRF_ERROR_NOT_SUPPORTED Non-zero value supplied to one or more of the unsupported parameters. + * @retval ::NRF_SUCCESS Values successfully written to configuration registers. + */ +SVCALL(SD_FLASH_PROTECT, uint32_t, sd_flash_protect(uint32_t block_cfg0, uint32_t block_cfg1, uint32_t block_cfg2, uint32_t block_cfg3)); + +/**@brief Opens a session for radio timeslot requests. + * + * @note Only one session can be open at a time. + * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) will be called when the radio timeslot + * starts. From this point the NRF_RADIO and NRF_TIMER0 peripherals can be freely accessed + * by the application. + * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0) is called whenever the NRF_TIMER0 + * interrupt occurs. + * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO) is called whenever the NRF_RADIO + * interrupt occurs. + * @note p_radio_signal_callback() will be called at ARM interrupt priority level 0. This + * implies that none of the sd_* API calls can be used from p_radio_signal_callback(). + * + * @param[in] p_radio_signal_callback The signal callback. + * + * @retval ::NRF_ERROR_INVALID_ADDR p_radio_signal_callback is an invalid function pointer. + * @retval ::NRF_ERROR_BUSY If session cannot be opened. + * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error. + * @retval ::NRF_SUCCESS Otherwise. + */ + SVCALL(SD_RADIO_SESSION_OPEN, uint32_t, sd_radio_session_open(nrf_radio_signal_callback_t p_radio_signal_callback)); + +/**@brief Closes a session for radio timeslot requests. + * + * @note Any current radio timeslot will be finished before the session is closed. + * @note If a radio timeslot is scheduled when the session is closed, it will be canceled. + * @note The application cannot consider the session closed until the @ref NRF_EVT_RADIO_SESSION_CLOSED + * event is received. + * + * @retval ::NRF_ERROR_FORBIDDEN If session not opened. + * @retval ::NRF_ERROR_BUSY If session is currently being closed. + * @retval ::NRF_SUCCESS Otherwise. + */ + SVCALL(SD_RADIO_SESSION_CLOSE, uint32_t, sd_radio_session_close(void)); + +/**@brief Requests a radio timeslot. + * + * @note The request type is determined by p_request->request_type, and can be one of @ref NRF_RADIO_REQ_TYPE_EARLIEST + * and @ref NRF_RADIO_REQ_TYPE_NORMAL. The first request in a session must always be of type @ref NRF_RADIO_REQ_TYPE_EARLIEST. + * @note For a normal request (@ref NRF_RADIO_REQ_TYPE_NORMAL), the start time of a radio timeslot is specified by + * p_request->distance_us and is given relative to the start of the previous timeslot. + * @note A too small p_request->distance_us will lead to a @ref NRF_EVT_RADIO_BLOCKED event. + * @note Timeslots scheduled too close will lead to a @ref NRF_EVT_RADIO_BLOCKED event. + * @note See the SoftDevice Specification for more on radio timeslot scheduling, distances and lengths. + * @note If an opportunity for the first radio timeslot is not found before 100 ms after the call to this + * function, it is not scheduled, and instead a @ref NRF_EVT_RADIO_BLOCKED event is sent. + * The application may then try to schedule the first radio timeslot again. + * @note Successful requests will result in nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START). + * Unsuccessful requests will result in a @ref NRF_EVT_RADIO_BLOCKED event, see @ref NRF_SOC_EVTS. + * @note The jitter in the start time of the radio timeslots is +/- @ref NRF_RADIO_START_JITTER_US us. + * @note The nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) call has a latency relative to the + * specified radio timeslot start, but this does not affect the actual start time of the timeslot. + * @note NRF_TIMER0 is reset at the start of the radio timeslot, and is clocked at 1MHz from the high frequency + * (16 MHz) clock source. If p_request->hfclk_force_xtal is true, the high frequency clock is + * guaranteed to be clocked from the external crystal. + * @note The SoftDevice will neither access the NRF_RADIO peripheral nor the NRF_TIMER0 peripheral + * during the radio timeslot. + * + * @param[in] p_request Pointer to the request parameters. + * + * @retval ::NRF_ERROR_FORBIDDEN If session not opened or the session is not IDLE. + * @retval ::NRF_ERROR_INVALID_ADDR If the p_request pointer is invalid. + * @retval ::NRF_ERROR_INVALID_PARAM If the parameters of p_request are not valid. + * @retval ::NRF_SUCCESS Otherwise. + */ + SVCALL(SD_RADIO_REQUEST, uint32_t, sd_radio_request(nrf_radio_request_t const * p_request)); + +/**@brief Write register protected by the SoftDevice + * + * This function writes to a register that is write-protected by the SoftDevice. Please refer to your + * SoftDevice Specification for more details about which registers that are protected by SoftDevice. + * This function can write to the following protected peripheral: + * - BPROT + * + * @note Protected registers may be read directly. + * @note Register that are write-once will return @ref NRF_SUCCESS on second set, even the value in + * the register has not changed. See the Product Specification for more details about register + * properties. + * + * @param[in] p_register Pointer to register to be written. + * @param[in] value Value to be written to the register. + * + * @retval ::NRF_ERROR_INVALID_ADDR This function can not write to the reguested register. + * @retval ::NRF_SUCCESS Value successfully written to register. + * + */ +SVCALL(SD_PROTECTED_REGISTER_WRITE, uint32_t, sd_protected_register_write(volatile uint32_t * p_register, uint32_t value)); + +/**@} */ + +#ifdef __cplusplus +} +#endif +#endif // NRF_SOC_H__ + +/**@} */ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_svc.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_svc.h new file mode 100644 index 0000000000..292c692982 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/headers/nrf_svc.h @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef NRF_SVC__ +#define NRF_SVC__ + +#include "stdint.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef SVCALL_AS_NORMAL_FUNCTION +#define SVCALL(number, return_type, signature) return_type signature +#else + +#ifndef SVCALL +#if defined (__CC_ARM) +#define SVCALL(number, return_type, signature) return_type __svc(number) signature +#elif defined (__GNUC__) +#ifdef __cplusplus +#define GCC_CAST_CPP (uint16_t) +#else +#define GCC_CAST_CPP +#endif +#define SVCALL(number, return_type, signature) \ + _Pragma("GCC diagnostic push") \ + _Pragma("GCC diagnostic ignored \"-Wreturn-type\"") \ + __attribute__((naked)) \ + __attribute__((unused)) \ + static return_type signature \ + { \ + __asm( \ + "svc %0\n" \ + "bx r14" : : "I" (GCC_CAST_CPP number) : "r0" \ + ); \ + } \ + _Pragma("GCC diagnostic pop") + +#elif defined (__ICCARM__) +#define PRAGMA(x) _Pragma(#x) +#define SVCALL(number, return_type, signature) \ +PRAGMA(swi_number = (number)) \ + __swi return_type signature; +#else +#define SVCALL(number, return_type, signature) return_type signature +#endif +#endif // SVCALL + +#endif // SVCALL_AS_NORMAL_FUNCTION + +#ifdef __cplusplus +} +#endif +#endif // NRF_SVC__ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/hex/s132_nrf52_6.0.0_licence-agreement.txt b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/hex/s132_nrf52_6.0.0_licence-agreement.txt new file mode 100644 index 0000000000..a71adee7b9 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/hex/s132_nrf52_6.0.0_licence-agreement.txt @@ -0,0 +1,35 @@ +Copyright (c) 2007 - 2018, Nordic Semiconductor ASA +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + +2. Redistributions in binary form, except as embedded into a Nordic + Semiconductor ASA integrated circuit in a product or a software update for + such product, must reproduce the above copyright notice, this list of + conditions and the following disclaimer in the documentation and/or other + materials provided with the distribution. + +3. Neither the name of Nordic Semiconductor ASA nor the names of its + contributors may be used to endorse or promote products derived from this + software without specific prior written permission. + +4. This software, with or without modification, must only be used with a + Nordic Semiconductor ASA integrated circuit. + +5. Any software provided in binary form under this license must not be reverse + engineered, decompiled, modified and/or disassembled. + +THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/hex/s132_nrf52_6.0.0_softdevice.hex b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/hex/s132_nrf52_6.0.0_softdevice.hex new file mode 100644 index 0000000000..f30de08500 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/hex/s132_nrf52_6.0.0_softdevice.hex @@ -0,0 +1,9278 @@ +:020000040000FA +:1000000000040020E90800007D050000C908000088 +:1000100087050000910500009B050000000000001E +:100020000000000000000000000000000D090000BA +:10003000A505000000000000AF050000B9050000A4 +:10004000C3050000CD050000D7050000E105000054 +:10005000EB050000F5050000FF05000009060000A3 +:10006000130600001D0600002706000031060000F0 +:100070003B060000450600004F0600005906000040 +:10008000630600006D060000770600008106000090 +:100090008B060000950600009F060000A9060000E0 +:1000A000B3060000BD060000C7060000D106000030 +:1000B000DB060000E5060000EF060000F906000080 +:1000C000030700000D0700001707000021070000CC +:1000D0002B070000350700003F070000490700001C +:1000E000530700005D07000067070000710700006C +:1000F0007B070000850700008F07000099070000BC +:10010000A30700001FB500F003F88DE80F001FBD26 +:1001100000F0E0BB1FB56FF00100009040100390AD +:10012000029001904FF010208069000B420900F00E +:100130001F045DF822300120A04083434DF8223097 +:10014000684600F045F91FBDF0B54FF6FF734FF458 +:10015000B4751A466E1E11E0A94201D3344600E080 +:100160000C46091B30F8027B641E3B441A44F9D14B +:100170009CB204EB134394B204EB12420029EBD17E +:1001800098B200EB134002EB124140EA0140F0BD8F +:10019000DE4992B00446D1E90001CDE91001FF2209 +:1001A0004021684600F03CFB94E80F008DE80F000A +:1001B000684610A902E004C841F8042D8842FAD12B +:1001C00010216846FFF7C0FF1090AA208DF8440068 +:1001D000FFF7A0FF00F0F3F84FF01024A069102201 +:1001E0006946803000F002F9A069082210A900F0E9 +:1001F000FDF800F0D8F84FF080510A6949690068AD +:100200004A43824201D8102070470020704710B541 +:10021000D0E900214FF0805002EB8103026944696C +:100220006243934209D84FF01022536903EB8103D4 +:100230000169406941438B4201D9092010BD5069D1 +:10024000401C01D0002010BD0F2010BD70B501680A +:100250000446AF4D4FF01020072952D2DFE801F0DD +:10026000330419293C1E2500D4E902656468294637 +:10027000304600F0CDF82A462146304600F0B6F868 +:10028000AA002146304600F09FFA002800D0032043 +:1002900070BD00F051FB4FF4805007E0201DFFF7C8 +:1002A000AAFF0028F4D100F047FB60682860002016 +:1002B00070BD241D94E80700920000F085FA002824 +:1002C000F6D00E2070BD8069401C12D0201DFFF7B3 +:1002D0009EFF0028F6D109E08069401C09D0201D4E +:1002E000FFF789FF0028EDD1606820B12046FFF7B5 +:1002F0004FFF042070BDFFF70DFF00F060F800F025 +:1003000052F8072070BD10B50C46182802D0012005 +:10031000086010BD2068FFF799FF206010BD4FF006 +:100320001024A069401C05D0A569A66980353079E4 +:10033000AA2808D06069401C2DD060690068401C64 +:1003400029D060692CE010212846FFF7FDFE3168B6 +:1003500081421CD1A16901F18002C03105E030B1B8 +:1003600008CA51F8040D984201D1012000E0002094 +:100370008A42F4D158B1286810B1042803D0FEE7AE +:10038000284600F057F862496868086008E000F005 +:1003900016F800F008F84FF480500168491C01D0AD +:1003A00000F0A4FAFEE7BFF34F8F5A4801685A4A9B +:1003B00001F4E06111430160BFF34F8FFEE74FF09E +:1003C00010208169491C02D0806900F0AEB87047E6 +:1003D000524A01681160121D416811604F4A8168DC +:1003E00010321160111DC068086070472DE9F0419E +:1003F00017460D460646002406E03046296800F000 +:10040000A7F8641C2D1D361DBC42F6D3BDE8F08153 +:1004100070B50C4605464FF4806608E0284600F0AB +:1004200084F8B44205D3A4F5806405F58055002C0A +:10043000F4D170BD4168044609B1012500E00025F2 +:100440004FF010267069A268920000F0BDF9C8B1A3 +:10045000204600F01AF89DB17669A56864684FF4EB +:10046000002084420AD2854208D229463046FFF74E +:10047000CFFF2A4621463046FFF7B8FFFFF79FFF20 +:10048000FFF791FFFFF746FEF8E72DE9FF414FF038 +:100490001024616980680D0B01EB800000F6FF708D +:1004A000010B0020009001900290024603906846E4 +:1004B00001230BE0560902F01F0C50F8267003FAD6 +:1004C0000CFC47EA0C0740F82670521CAA42F1D3F4 +:1004D0000AE04A0901F01F0650F8225003FA06F616 +:1004E000354340F82250491C8029F2D3A169090BF9 +:1004F0004A0901F01F0150F822408B409C4340F80C +:100500002240FFF765FFBDE8FF8100005C090000A5 +:10051000000000200CED00E00400FA050006004099 +:10052000144801680029FCD07047134A0221116069 +:1005300010490B68002BFCD00F4B1B1D186008687E +:100540000028FCD00020106008680028FCD070470C +:10055000094B10B501221A60064A1468002CFCD021 +:10056000016010680028FCD0002018601068002886 +:10057000FCD010BD00E4014004E5014008208F4993 +:1005800009680958084710208C4909680958084724 +:1005900014208A49096809580847182087490968BA +:1005A0000958084730208549096809580847382004 +:1005B00082490968095808473C2080490968095858 +:1005C000084740207D4909680958084744207B496D +:1005D00009680958084748207849096809580847B0 +:1005E0004C20764909680958084750207349096822 +:1005F0000958084754207149096809580847582084 +:100600006E490968095808475C206C49096809580F +:100610000847602069490968095808476420674904 +:100620000968095808476820644909680958084753 +:100630006C20624909680958084770205F490968B9 +:100640000958084774205D49096809580847782007 +:100650005A490968095808477C20584909680958C7 +:10066000084780205549096809580847842053499C +:1006700009680958084788205049096809580847F7 +:100680008C204E4909680958084790204B49096851 +:10069000095808479420494909680958084798208B +:1006A00046490968095808479C204449096809587F +:1006B0000847A0204149096809580847A4203F4934 +:1006C000096809580847A8203C490968095808479B +:1006D000AC203A49096809580847B02037490968E9 +:1006E00009580847B4203549096809580847B8200F +:1006F0003249096809580847BC2030490968095837 +:100700000847C0202D49096809580847C4202B49CB +:10071000096809580847C82028490968095808473E +:10072000CC202649096809580847D0202349096880 +:1007300009580847D4202149096809580847D82092 +:100740001E49096809580847DC201C4909680958EE +:100750000847E0201949096809580847E420174963 +:10076000096809580847E8201449096809580847E2 +:10077000EC201249096809580847F0200F49096818 +:1007800009580847F4200D49096809580847F82016 +:100790000A49096809580847FC20084909680958A6 +:1007A00008475FF480700549096809580847000048 +:1007B00003480449024A034B704700000000002030 +:1007C000680900006809000040EA010310B59B07B2 +:1007D0000FD1042A0DD310C808C9121F9C42F8D0AB +:1007E00020BA19BA884201D9012010BD4FF0FF305C +:1007F00010BD1AB1D30703D0521C07E0002010BD72 +:1008000010F8013B11F8014B1B1B07D110F8013BFD +:1008100011F8014B1B1B01D1921EF1D1184610BDDE +:1008200002F0FF0343EA032242EA024200F005B865 +:100830007047704770474FF000020429C0F01280E3 +:1008400010F0030C00F01B80CCF1040CBCF1020F83 +:1008500018BF00F8012BA8BF20F8022BA1EB0C0158 +:1008600000F00DB85FEAC17C24BF00F8012B00F84E +:10087000012B48BF00F8012B70474FF0000200B574 +:10088000134694469646203922BFA0E80C50A0E8B3 +:100890000C50B1F12001BFF4F7AF090728BFA0E861 +:1008A0000C5048BF0CC05DF804EB890028BF40F82D +:1008B000042B08BF704748BF20F8022B11F0804F6F +:1008C00018BF00F8012B7047014B1B68DB68184705 +:1008D0000000002009480A497047FFF7FBFFFFF7B7 +:1008E00011FC00BD20BFFDE7064B1847064A10600B +:1008F000016881F30888406800470000680900002B +:10090000680900001F030000000000201EF0040F13 +:100910000CBFEFF30881EFF3098188690238007892 +:10092000182803D100E00000074A1047074A126860 +:100930002C3212681047000000B5054B1B68054AB1 +:100940009B58984700BD00000703000000000020EE +:100950005809000004000000001000000000000022 +:0809600000FFFFFF0090D0032F +:10100000E0120020D1430200192F000043430200E8 +:10101000192F0000192F0000192F000000000000F8 +:101020000000000000000000000000002944020051 +:10103000192F000000000000192F0000192F0000D8 +:101040009144020097440200192F0000192F00005C +:10105000192F0000192F0000192F0000192F000070 +:101060009D440200192F0000192F0000A344020024 +:10107000192F0000A9440200AF440200B544020049 +:10108000192F0000192F0000192F0000192F000040 +:10109000192F0000192F0000192F0000192F000030 +:1010A000192F0000BB440200192F0000192F000067 +:1010B000192F0000192F0000192F0000192F000010 +:1010C000C1440200192F0000192F0000192F000041 +:1010D000192F0000192F0000192F0000192F0000F0 +:1010E000192F0000192F0000192F0000192F0000E0 +:1010F000192F0000192F0000192F0000192F0000D0 +:10110000192F0000192F000000F002F823F04DF90C +:101110000AA090E8000C82448344AAF10107DA4552 +:1011200001D123F042F9AFF2090EBAE80F0013F033 +:10113000010F18BFFB1A43F0010318479038020053 +:10114000B03802000A444FF0000C10F8013B13F0D5 +:10115000070408BF10F8014B1D1108BF10F8015B10 +:10116000641E05D010F8016B641E01F8016BF9D103 +:1011700013F0080F1EBF10F8014BAD1C0C1B09D15A +:101180006D1E58BF01F801CBFAD505E014F8016BCC +:1011900001F8016B6D1EF9D59142D6D3704700005E +:1011A0000023002400250026103A28BF78C1FBD870 +:1011B000520728BF30C148BF0B6070471FB500F011 +:1011C0003DF88DE80F001FBD1EF0040F0CBFEFF3BC +:1011D0000880EFF30980014A10470000752E0000D7 +:1011E0008269034981614FF001001044704700009B +:1011F000F511000001B41EB400B512F00FFE01B4E9 +:101200000198864601BC01B01EBD0000F0B4404606 +:10121000494652465B460FB402A0013001B506486C +:10122000004700BF01BC86460FBC804689469246F7 +:101230009B46F0BC704700000911000023F0B2B8D3 +:1012400070B51A4C054609202070A01C00F05FF80C +:101250005920A08029462046BDE8704008F05CB8BF +:1012600008F065B870B50C461149097829B1A0F1AC +:1012700060015E2908D3012013E0602804D06928AA +:1012800002D043F201000CE020CC0A4E94E80E009C +:1012900006EB8000A0F58050241FD0F8806E284611 +:1012A000B047206070BD012070470000080000209A +:1012B0001C0000202845020010B504460021012032 +:1012C00000F03DF800210B2000F039F8042119202E +:1012D00000F035F804210D2000F031F804210E2033 +:1012E00000F02DF804210F2000F029F80421C84354 +:1012F00000F025F80621162000F021F8062115201F +:1013000000F01DF82046FFF79BFF002010BDA8212C +:1013100001807047FFF7A4BF11487047104870471D +:10132000104A10B514680F4B0F4A08331A60FFF7C4 +:1013300099FF0C48001D046010BD704770474907B5 +:10134000090E002806DA00F00F0000F1E02080F816 +:10135000141D704700F1E02080F800147047000071 +:1013600003F900421005024001000001FE4800217F +:1013700001604160018170472DE9F743044692B056 +:101380009146406813F00EF840B1606813F013F80E +:1013900020B9607800F00300022801D0012000E0AD +:1013A0000020F14E3072484612F0B8FF18B11020FC +:1013B00015B0BDE8F0834946012001F018FF002870 +:1013C000F6D101258DF842504FF4C050ADF84000E1 +:1013D000002210A9284606F047FC0028E8D18DF825 +:1013E00042504FF428504FF00008ADF840004746F7 +:1013F0001C216846CDF81C8022F07BFF9DF81C0064 +:1014000008AA20F00F00401C20F0F00010308DF8EA +:101410001C0020788DF81D0061789DF81E0061F396 +:10142000420040F001008DF81E009DF800000AA95E +:1014300040F002008DF800002089ADF83000ADF8D2 +:101440003270608907AFADF834000B97606810AC5C +:101450000E900A94684606F0FCF90028A8D1BDF861 +:10146000200030808DF8425042F60120ADF8400057 +:101470009DF81E0008AA20F00600801C20F0010044 +:101480008DF81E000220ADF83000ADF8340013A82E +:101490000E900AA9684606F0DCF9002888D1BDF84C +:1014A00020007080311D484600F033F9002887D1B4 +:1014B0008DF8425042F6A620ADF840001C21684647 +:1014C000CDF81C8022F015FF9DF81C00ADF83450BB +:1014D00020F00F00401C20F0F00010308DF81C00B0 +:1014E0009DF81D0008AA20F0FF008DF81D009DF852 +:1014F0001E000AA920F0060040F00100801C8DF8B3 +:101500001E009DF800008DF8445040F002008DF858 +:101510000000CDE90A4711A80E90ADF8305068469A +:1015200006F097F9002899D1BDF82000F08000203E +:101530003EE73EB504460820ADF80000204612F014 +:10154000EDFE08B110203EBD2146012001F04FFE06 +:101550000028F8D12088ADF804006088ADF80600B6 +:10156000A088ADF80800E088ADF80A007E4801AB1D +:101570006A468088002106F071FDBDF80010082938 +:10158000E1D003203EBD1FB5044600200290082094 +:10159000ADF80800CDF80CD0204612F0BFFE10B117 +:1015A000102004B010BD704802AA81884FF6FF7069 +:1015B00006F096FF0028F4D1BDF80810082901D0E4 +:1015C0000320EEE7BDF800102180BDF80210618015 +:1015D000BDF80410A180BDF80610E180E1E701B577 +:1015E00082B00220ADF800005F4802AB6A46408836 +:1015F000002106F033FDBDF80010022900D00320C1 +:101600000EBD1CB5002100910221ADF80010019023 +:1016100012F0AAFE08B110201CBD53486A4641884A +:101620004FF6FF7006F05CFFBDF800100229F3D002 +:1016300003201CBDFEB54C4C06461546207A0F46CD +:10164000C00705D0084612F069FE18B11020FEBD93 +:101650000F20FEBDF82D01D90C20FEBD304612F042 +:101660005DFE18BB208801A905F03CFE0028F4D1DE +:1016700030788DF80500208801A906F0CEFC0028FE +:10168000EBD100909DF800009DF8051040F002009D +:101690008DF80000090703D040F008008DF8000025 +:1016A0002088694606F056FC0028D6D1ADF80850CF +:1016B00020883B4602AA002106F0D0FCBDF80810A5 +:1016C000A942CAD00320FEBD7CB50546002000908B +:1016D00001900888ADF800000C462846019512F0EC +:1016E00061FE18B9204612F03FFE08B110207CBD03 +:1016F00015B1BDF8000050B11B486A4601884FF68D +:10170000FF7006F0EDFEBDF8001021807CBD0C20BE +:101710007CBD30B593B0044600200D4600901421E6 +:1017200001A822F0E6FD1C2108A822F0E2FD9DF8A8 +:101730000000CDF808D020F00F00401C20F0F00091 +:1017400010308DF800009DF8010020F0FF008DF8AA +:1017500001009DF8200040F002008DF820000120DB +:101760008DF8460002E000000C02002042F6042042 +:10177000ADF8440011A801902088ADF83C006088C5 +:10178000ADF83E00A088ADF84000E088ADF842001A +:101790009DF8020006AA20F00600801C20F001003F +:1017A0008DF802000820ADF80C00ADF810000FA86D +:1017B000059001A908A806F04CF8002803D1BDF84F +:1017C00018002880002013B030BD0000F0B5007B69 +:1017D000059F1E4614460D46012800D0FFDF0C2051 +:1017E00030803A203880002C08D0287A032806D090 +:1017F000287B012800D0FFDF17206081F0BDA88979 +:10180000FBE72DE9F04786B0144691F80C900E9A4C +:101810000D46B9F1010F0BD01021007B2E8A8846AE +:10182000052807D0062833D0FFDF06B0BDE8F087D3 +:101830000221F2E7E8890C2100EB400001EB4000B7 +:10184000188033201080002CEFD0E88960810027B9 +:101850001AE00096688808F1020301AA696900F09D +:1018600084FF06EB0800801C07EB470186B204EBFF +:101870004102BDF8040090810DF1060140460E3290 +:1018800010F018FE7F1CBFB26089B842E1D8CCE7E7 +:1018900034201080E889B9F1010F11D0122148439A +:1018A0000E301880002CC0D0E88960814846B9F11C +:1018B000010F00D00220207300270DF1040A1FE061 +:1018C0000621ECE70096688808F1020301AA69691D +:1018D00000F04BFF06EB0800801C86B2B9F1010F47 +:1018E00012D007EBC70004EB4000BDF80410C18123 +:1018F00010220AF10201103022F05AFC7F1CBFB204 +:101900006089B842DED890E707EB470104EB41025B +:10191000BDF80400D0810AF102014046103210F0F7 +:10192000C9FDEBE72DE9F0470E4688B090F80CC0F2 +:1019300096F80C80378AF5890C20109902F10C0476 +:101940004FF0000ABCF1030F08D0BCF1040F3ED0E9 +:10195000BCF1070F7DD0FFDF08B067E705EB850C12 +:1019600000EB4C00188031200880002AF4D0A8F148 +:10197000060000F0FF09558125E0182101A822F09A +:10198000B8FC00977088434601AA716900F0EDFE2B +:10199000BDF804002080BDF80600E080BDF8080016 +:1019A0002081A21C0DF10A01484610F083FDB9F117 +:1019B000000F00D018B184F804A0A4F802A007EB2F +:1019C000080087B20A346D1EADB2D6D2C4E705EB6B +:1019D000850C00EB4C00188032200880002ABBD018 +:1019E000A8F1050000F0FF09558137E000977088E5 +:1019F000434601AA716900F0B8FE9DF80600BDF8E3 +:101A00000410E1802179420860F3000162F3410192 +:101A1000820862F38201C20862F3C301020962F321 +:101A20000411420962F34511820962F386112171A2 +:101A3000C0096071BDF80700208122460DF109013F +:101A4000484610F037FD18B184F802A0A4F800A0B1 +:101A500000E007E007EB080087B20A346D1EADB264 +:101A6000C4D279E7A8F1020084B205FB08F000F1C6 +:101A70000E0CA3F800C035230B80002AA6D0558198 +:101A80009481009783B270880E32716900F06DFE08 +:101A900062E72DE9F84F1E460A9D0C4681462AB1A1 +:101AA000607A00F58070D080E089108199F80C0090 +:101AB0000C274FF000084FF00E0A0D2873D2DFE814 +:101AC00000F09E070E1C28303846556A7373730069 +:101AD000214648460095FFF779FEBDE8F88F207B48 +:101AE0009146082802D0032800D0FFDF378030203D +:101AF0000AE000BFA9F80A80EFE7207B914604289E +:101B000000D0FFDF378031202880B9F1000FF1D1FC +:101B1000E3E7207B9146042800D0FFDF37803220A6 +:101B2000F2E7207B9146022800D0FFDF3780332088 +:101B3000EAE7207B1746022800D0FFDF3420A6F812 +:101B400000A02880002FC8D0A7F80A80C5E7207B16 +:101B50001746042800D0FFDF3520A6F800A0288013 +:101B6000002FBAD04046A7F80A8012E0207B174623 +:101B7000052802D0062800D0FFDF10203080362054 +:101B80002880002FA9D0E0897881A7F80E80B9F8C5 +:101B90000E00B881A1E7207B9146072800D0FFDF27 +:101BA00037803720B0E72AE04FF0120018804FF05E +:101BB00038001700288090D0E0897881A7F80E803F +:101BC000A7F8108099F80C000A2805D00B2809D036 +:101BD0000C280DD0FFDF80E7207B0A2800D0FFDF34 +:101BE00001200AE0207B0B2800D0FFDF042004E066 +:101BF000207B0C2800D0FFDF052038736DE7FFDF66 +:101C00006BE770B50C46054601F025FC20B1007865 +:101C1000222804D2082070BD43F2020070BD0521C5 +:101C200028460EF0C5FE206008B1002070BD0320DC +:101C300070BD30B44880087820F00F00C01C20F040 +:101C4000F000903001F8080B1DCA81E81D0030BC7F +:101C500007F0E3BB2DE9FF4784B0002782460297D7 +:101C600007989046894612300AF014F9401D20F07A +:101C70000306079828B907A95046FFF7C2FF0028B6 +:101C800054D1B9F1000F05D00798017B19BB052588 +:101C900004681BE098F80000092803D00D2812D032 +:101CA000FFDF46E0079903254868B0B3497B4288C7 +:101CB0007143914239D98AB2B3B2011D0EF0EBFCE7 +:101CC0000446078002E0079C042508340CB12088F4 +:101CD00010B1032D29D02CE00798012112300AF011 +:101CE0000BF9ADF80C00024602AB2946504608F04D +:101CF000F0F9070001D1A01C029007983A46123073 +:101D0000C8F80400A8F802A003A94046029B0AF004 +:101D100000F9D8B10A2817D200E006E0DFE800F0A9 +:101D200007091414100B0D141412132014E60020CC +:101D300012E6112010E608200EE643F203000BE63F +:101D4000072009E60D2007E6032005E6BDF80C0094 +:101D50002346CDE900702A465046079900F015FD4C +:101D600057B9032D08D10798B3B2417B406871433E +:101D70008AB2011D0EF0A3FCB9F1000FD7D007996C +:101D800081F80C90D3E72DE9FE4F91461A881C4646 +:101D90008A468046FAB102AB494608F09AF9050036 +:101DA00019D04046A61C27880EF046FF324607266B +:101DB00029463B4600960EF054FB20882346CDE989 +:101DC00000504A465146404600F0DFFC002020808B +:101DD0000120BDE8FE8F0020FBE710B586B01C4651 +:101DE000AAB104238DF800301388ADF8083052886A +:101DF000ADF80A208A788DF80E200988ADF80C100D +:101E000000236A462146FFF725FF06B010BD1020CB +:101E1000FBE770B50D4605210EF0CAFD040000D1A8 +:101E2000FFDF294604F11200BDE870400AF04DB80A +:101E30002DE9F8430D468046002607F0EBFA0446EC +:101E40002878102878D2DFE800F0773B345331311E +:101E5000123131310831313131312879001FC0B2AE +:101E6000022801D0102810D114BBFFDF35E004B9DF +:101E7000FFDF052140460EF09BFD007B032806D0C6 +:101E800004280BD0072828D0FFDF072655E0287943 +:101E9000801FC0B2022820D050B1F6E72879401F39 +:101EA000C0B2022819D0102817D0EEE704B9FFDF1E +:101EB00013E004B9FFDF287901280ED1172137E09C +:101EC000052140460EF074FD070000D1FFDF07F149 +:101ED0001201404609F0D6FF2CB12A462146404661 +:101EE000FFF7A7FE29E01321404602F0A7FD24E0FA +:101EF00004B9FFDF052140460EF05AFD060000D16F +:101F0000FFDF694606F1120009F0C6FF060000D0A7 +:101F1000FFDFA988172901D2172200E00A46BDF881 +:101F20000000824202D9014602E005E01729C5D32C +:101F3000404600F03AFCD0E7FFDF3046BDE8F883CA +:101F4000401D20F0030219B102FB01F0001D00E06A +:101F500000201044704713B5009848B1002468462B +:101F60000EF043FB002C02D1F74A009911601CBD12 +:101F700001240020F4E72DE9F0470C461546242102 +:101F8000204622F0B6F905B9FFDFA87860732888EB +:101F9000DFF8B4A3401D20F00301AF788946DAF8DA +:101FA00000000EF040FB060000D1FFDF4FF00008FC +:101FB0002660A6F8008077B109FB07F1091D0AD059 +:101FC000DAF800000EF02FFB060000D1FFDF66609C +:101FD000C6F8008001E0C4F80480298804F11200EA +:101FE000BDE8F04709F040BF2DE9F047804601F118 +:101FF00012000D46814609F04DFF401DD24F20F0E2 +:1020000003026E7B1446296838680EF037FB3EB138 +:1020100004FB06F2121D03D0696838680EF02EFB2F +:1020200005200EF06DFC044605200EF071FC201A10 +:10203000012802D138680EF0EBFA49464046BDE867 +:10204000F04709F026BF70B5054605210EF0B0FC3B +:10205000040000D1FFDF04F112012846BDE8704002 +:1020600009F010BF2DE9F04F91B04FF0000BADF823 +:1020700034B0ADF804B047880C46054692460521B9 +:1020800038460EF095FC060000D1FFDF24B1A78092 +:10209000A4F806B0A4F808B0297809220B20B2EB06 +:1020A000111F7DD12A7A04F1100138274FF00C0856 +:1020B0004FF001090391102A73D2DFE802F072F2A7 +:1020C000F1F07F08D2888D9F3DDBF3EEB6B6307B12 +:1020D000022800D0FFDFA88908EBC001ADF804108A +:1020E0003021ADF83410002C25D06081B5F80E9069 +:1020F00000271DE004EBC708317C88F80E10F18939 +:10210000A8F80C10CDF800906888042304AA296967 +:1021100000F02BFBBDF81010A8F8101009F1040016 +:10212000BDF812107F1C1FFA80F9A8F81210BFB278 +:102130006089B842DED80DE1307B022800D0FFDF95 +:10214000E98908EBC100ADF804003020ADF8340097 +:10215000287B0A90001FC0B20F90002CEBD0618149 +:10216000B5F81090002725E0CDF8009068886969DF +:1021700003AA0A9B00F0F9FA0A9804EBC70848443E +:102180001FFA80F908F10C0204A90F9810F092F9D7 +:1021900018B188F80EB0A8F80CB0BDF80C1001E02A +:1021A000D4E0CFE0A8F81010BDF80E107F1CA8F8FE +:1021B0001210BFB26089B842D6D8CBE00DA800900B +:1021C00001AB224629463046FFF71BFBC2E0307BBD +:1021D000082805D0FFDF03E0307B082800D0FFDFB0 +:1021E000E8891030ADF804003620ADF83400002C3A +:1021F0003FD0A9896181F189A18127E0307B09283D +:1022000000D0FFDFA88900F10C01ADF804103721E0 +:10221000ADF83410002C2CD06081E8890090AB8997 +:10222000688804F10C02296956E0E88939211030E8 +:1022300080B2ADF80400ADF83410002C74D0A98938 +:102240006181287A0E280AD002212173E989E1816F +:10225000288A0090EB8968886969039A3CE001212B +:10226000F3E70DA8009001AB224629463046FFF760 +:1022700059FB6FE0307B0A2800D0FFDF1220ADF859 +:102280000400ADF834704CB3A9896181A4F810B092 +:10229000A4F80EB084F80C905CE020E002E031E09D +:1022A00039E042E0307B0B2800D0FFDF288AADF810 +:1022B00034701230ADF8040084B104212173A9896F +:1022C0006181E989E181298A2182688A00902B8ACB +:1022D000688804F11202696900F047FA3AE0307B3D +:1022E0000C2800D0FFDF1220ADF80400ADF83470E8 +:1022F0003CB305212173A4F80AB0A4F80EB0A4F8E9 +:1023000010B027E00DA8009001AB224629463046C8 +:10231000FFF75CFA1EE00DA8009001AB22462946AB +:102320003046FFF7B6FB15E034E03B21ADF8040082 +:10233000ADF8341074B3A4F80690A4F808B084F88B +:102340000AB007E0FFDF05E010000020297A01292C +:1023500017D0FFDFBDF80400AAF800006CB1BDF88B +:1023600034002080BDF804006080BDF834003928B6 +:1023700003D03C2801D086F80CB011B00020BDE895 +:10238000F08F3C21ADF80400ADF8341014B1697A37 +:10239000A172DFE7AAF80000EFE72DE9F8435688BD +:1023A0000F4680461546052130460EF001FB04001D +:1023B00000D1FFDF123400943B46414630466A6844 +:1023C00009F0DBFEBAE570B50D4605210EF0F0FA16 +:1023D000040000D1FFDF294604F11200BDE870407F +:1023E00009F065BD70B50D4605210EF0E1FA040057 +:1023F00000D1FFDF294604F11200BDE8704009F06A +:1024000083BD70B5054605210EF0D2FA040000D157 +:10241000FFDF04F1080321462846BDE8704004228E +:10242000B1E470B5054605210EF0C2FA040000D1F2 +:10243000FFDF214628462368BDE870400522A2E45C +:1024400070B5064605210EF0B3FA040000D1FFDF97 +:1024500004F1120009F01EFD401D20F0030511E0FB +:10246000011D00880322431821463046FFF78BFCEC +:1024700000280BD0607BABB2684382B26068011D5C +:102480000EF053F9606841880029E9D170BD70B53C +:102490000E46054606F0BEFF040000D1FFDF012016 +:1024A000207266726580207820F00F00C01C20F03A +:1024B000F00030302070BDE8704006F0AEBF2DE96E +:1024C000F0438BB00D461446814606A9FFF799FBF1 +:1024D000002814D14FF6FF7601274FF420588CB115 +:1024E00003208DF800001020ADF8100007A805901B +:1024F00007AA204604A90FF0FCFF78B107200BB013 +:10250000BDE8F0830820ADF808508DF80E708DF806 +:102510000000ADF80A60ADF80C800CE00698A178D8 +:1025200001742188C1818DF80E70ADF80850ADF8A6 +:102530000C80ADF80A606A4602214846069BFFF708 +:1025400089FBDCE708B501228DF8022042F6020281 +:10255000ADF800200A4603236946FFF73EFC08BD9C +:1025600008B501228DF8022042F60302ADF80020E2 +:102570000A4604236946FFF730FC08BD00B587B062 +:1025800079B102228DF800200A88ADF80820498828 +:10259000ADF80A1000236A460521FFF75BFB07B080 +:1025A00000BD1020FBE709B1072316E407207047A0 +:1025B00070B588B00D461446064606A9FFF721FB04 +:1025C00000280ED17CB10620ADF808508DF800002F +:1025D000ADF80A40069B6A460821DC813046FFF7C9 +:1025E00039FB08B070BD05208DF80000ADF808502B +:1025F000F0E700B587B059B107238DF80030ADF88A +:102600000820039100236A460921FFF723FBC6E750 +:102610001020C4E770B588B00C460646002506A910 +:10262000FFF7EFFA0028DCD106980121123009F0FB +:1026300063FC9CB12178062921D2DFE801F0200556 +:1026400005160318801E80B2C01EE28880B20AB14F +:10265000A3681BB1824203D90C20C2E71020C0E757 +:10266000042904D0A08850B901E00620B9E7012967 +:1026700013D0022905D004291CD005292AD007200F +:10268000AFE709208DF800006088ADF80800E08809 +:10269000ADF80A00A068039023E00A208DF800003E +:1026A0006088ADF80800E088ADF80A00A0680A2547 +:1026B000039016E00B208DF800006088ADF808004C +:1026C000A088ADF80A00E088ADF80C00A0680B25E2 +:1026D000049006E00C208DF8000060788DF808006A +:1026E0000C256A4629463046069BFFF7B3FA78E781 +:1026F00000B587B00D228DF80020ADF8081000233A +:102700006A461946FFF7A6FA49E700B587B071B1E6 +:1027100002228DF800200A88ADF808204988ADF81B +:102720000A1000236A460621FFF794FA37E71020C3 +:1027300035E770B586B0064601200D46ADF80810A5 +:102740008DF80000014600236A463046FFF782FA02 +:10275000040008D12946304605F09AFC0021304695 +:1027600005F0B4FC204606B070BDF8B51C46154611 +:102770000E46069F0EF04EFA2346FF1DBCB23146B0 +:102780002A4600940DF039FEF8BD30B41146DDE95B +:1027900002423CB1032903D0002330BC08F022BB25 +:1027A0000123FAE71A8030BC704770B50C46054625 +:1027B000FFF72FFB2146284605F079FC2846BDE8A7 +:1027C0007040012105F082BC4FF0E0224FF400413F +:1027D0000020C2F88011204908702049900208604A +:1027E000704730B51C4D04462878A04218BF002C15 +:1027F00002D0002818BFFFDF2878A04208BF30BDF4 +:102800002C701749154A0020ECB1164DDFF858C05E +:10281000131F012C0DD0022C1CBFFFDF30BD086040 +:1028200003200860CCF800504FF4000010601860DE +:1028300030BD086002200860CCF800504FF04070B6 +:102840001060186030BD086008604FF06070106064 +:1028500030BD00B5FFDF00BD1800002008F50140C5 +:1028600000F500408C02002014F5004070B50B20EC +:1028700000F0B5F9082000F0B2F900210B2000F0BB +:10288000C4F90021082000F0C0F9EC4C0125656076 +:10289000A5600020C4F84001C4F84401C4F8480110 +:1028A0000B2000F0A7F9082000F0A4F90B2000F09D +:1028B0008BF9256070BD10B50B2000F090F9082051 +:1028C00000F08DF9DD48012141608160DC490A6832 +:1028D000002AFCD10021C0F84011C0F84411C0F812 +:1028E00048110B2000F086F9BDE81040082000F0E8 +:1028F00081B910B50B2000F07DF9BDE8104008202B +:1029000000F078B900B530B1012806D0022806D011 +:10291000FFDF002000BDCB4800BDCB4800BDCA484A +:10292000001D00BD70B5C9494FF000400860C84D9A +:10293000C00BC5F80803C74800240460C5F840412F +:102940000820C43500F04BF9C5F83C41C24804707A +:1029500070BD08B5B94A002128B1012811D002285C +:102960001CD0FFDF08BD4FF48030C2F80803C2F866 +:102970004803B3483C300160C2F84011BDE808404C +:10298000D0E74FF40030C2F80803C2F84803AC485F +:1029900040300160C2F84411AB480CE04FF4802095 +:1029A000C2F80803C2F84803A54844300160C2F8E1 +:1029B0004811A548001D0068009008BD70B5164676 +:1029C0000D460446022800D9FFDF00229B48012360 +:1029D00004F110018B4000EB8401C1F8405526B191 +:1029E000C1F84021C0F8043303E0C0F80833C1F84F +:1029F0004021C0F8443370BD2DE9F0411C46154616 +:102A000030B1012834D0022839D0FFDFBDE8F08191 +:102A1000891E002221F07F411046FFF7CFFF012CD5 +:102A200024D000208C4E8A4F012470703C6189496B +:102A300000203C3908600220091D086085490420F7 +:102A40003039086083483D350560C7F800420820EA +:102A500000F0D0F82004C7F80403082000F0B4F810 +:102A60007A49E007091F08603470CFE70120D9E7F1 +:102A7000012B02D00022012005E00122FBE7012BFF +:102A800004D000220220BDE8F04197E70122F9E7D7 +:102A90006B480068704770B500F0C7F8674C054692 +:102AA000D4F840010026012809D1D4F80803C00356 +:102AB00005D54FF48030C4F80803C4F84061D4F859 +:102AC000440101280CD1D4F80803800308D54FF441 +:102AD0000030C4F80803C4F84461012010F0CDFCB4 +:102AE000D4F8480101280CD1D4F80803400308D5D4 +:102AF0004FF48020C4F80803C4F84861022010F0A5 +:102B0000BCFC5648056070BD70B500F08EF8524DA3 +:102B10000446287858B1FFF705FF687820B10020F7 +:102B200085F8010010F0A9FC4C48046070BD03203A +:102B3000F8E74FF0E0214FF40010C1F800027047B1 +:102B4000152000F057B8424901200861082000F024 +:102B500051B83F494FF47C10C1F8080300200246E9 +:102B600001EB8003C3F84025C3F84021401CC0B2EC +:102B70000628F5D37047410A43F609525143C0F382 +:102B8000080010FB02F000F5807001EB5020704748 +:102B900010B5430B48F2376463431B0C5C020C60B6 +:102BA0002F4C03FB04002F4B4CF2F72443435B0DE7 +:102BB00013FB04F404EB402000F580704012107009 +:102BC00008681844086010BD00F01F020121914000 +:102BD0004009800000F1E020C0F80011704700F0CB +:102BE0001F02012191404009800000F1E020C0F85F +:102BF0008011704700F01F020121914040098000C0 +:102C000000F1E020C0F8801270474907090E002843 +:102C100006DA00F00F0000F1E02080F8141D704784 +:102C200000F1E02080F8001470470C48001F006895 +:102C30000A4A0D49121D11607047000000B00040A3 +:102C400004B500404081004044B1004008F5014017 +:102C500000800040408500403800002014050240FC +:102C6000F7C2FFFF6F0C0100010000010A4810B518 +:102C70000468094909480831086010F092FC0648C8 +:102C8000001D046010BD0649002008604FF0E021DF +:102C90000220C1F8800270471005024001000001C7 +:102CA000FC1F004010B50D2000F06FF8C4B26FF0AB +:102CB000040000F06AF8C0B2844200D0FFDF3A4955 +:102CC0000120086010BD70B50D2000F048F8374CA9 +:102CD0000020C4F800010125C4F804530D2000F0C1 +:102CE00049F825604FF0E0216014C1F8000170BD83 +:102CF00010B50D2000F033F82C480121416000216F +:102D0000C0F80011BDE810400D2000F033B828488D +:102D100010B5046826492748083108602349D1F8CE +:102D20000001012804D0FFDF2148001D046010BD10 +:102D30001D48001D00680022C0B2C1F8002110F03B +:102D4000E7FFF1E710B51948D0F800110029FBD0D2 +:102D5000FFF7DDFFBDE810400D2000F00BB800F0DC +:102D60001F02012191404009800000F1E020C0F8DD +:102D70008011704700F01F0201219140400980003E +:102D800000F1E020C0F880127047002806DA00F059 +:102D90000F0000F1E02090F8140D03E000F1E020B6 +:102DA00090F800044009704704D5004000D000406E +:102DB000100502400100000110B5202000F082F84B +:102DC000202000F08AF84A49202081F8000449496F +:102DD00000060860091D48480860FEF79DFA45494D +:102DE000C83108604548D0F8041341F00101C0F82B +:102DF0000413D0F8041341F08071C0F804133C4967 +:102E000001201C39C1F8000110BD10B5202000F0D0 +:102E100059F8384800210160001D0160354A481EFC +:102E2000E83A1060354AC2F80803324BC8331960DB +:102E3000C2F80001C2F8600131490860BDE81040E5 +:102E4000202000F04AB82B492E48EC390860704722 +:102E500028492C48E8390860704726480160001D61 +:102E6000521E0260704723490120E8390860BFF311 +:102E70004F8F704770B51F4A8069E83A2149116049 +:102E80001E49D1F8006100231F4D1D4A5C1E1EB172 +:102E9000A84206D300210FE0D1F8606186B1A842B4 +:102EA00009D2C1F80031C1F860311460BDE870404A +:102EB000202000F012B81168BDE8704021F040BA3F +:102EC000FFDF70BD00F01F0201219140400980002A +:102ED00000F1E020C0F88011704700F01F020121CE +:102EE00091404009800000F1E020C0F88012704756 +:102EF00020E000E000060240C41400200000024070 +:102F00000004024001000001006002000F4A126844 +:102F10000D498A420CD118470C4A12680A4B9A4252 +:102F200006D101B510F06EFFFFF78DFFBDE801403F +:102F3000074909680958084706480749054A064BE2 +:102F40007047000000000000BEBAFECAB0000020BA +:102F500004000020E0120020E012002070B50C46B2 +:102F6000054609F0A7FA21462846BDE870400AF058 +:102F70008CBB10B511F0B0FBFFF726FC11F04CFA3A +:102F8000BDE8104011F0FEBA0120810708607047CB +:102F9000012081074860704712480068C00700D0D0 +:102FA000012070470F48001F0068C00700D00120B3 +:102FB00070470C4808300068C00700D001207047F7 +:102FC000084810300068704706490C310A68D2037F +:102FD00006D5096801F00301814201D10120704743 +:102FE000002070470C0400407047704770477047DE +:102FF000704770477047704770470004050600002F +:103000002CFFFFFFDBE5B15100600200A800FFFFCD +:1030100084000000808D5B0016425791AD5F58BC64 +:103020008E702F5A0FAA100DBCD52BFD30B5FC4D5C +:103030000446062CA9780ED2DFE804F0030E0E0E2B +:103040000509FFDF08E0022906D0FFDF04E00329BD +:1030500002D0FFDF00E0FFDFAC7030BD30B50446CA +:103060001038EF4D07280CD2DFE800F0040C060CF6 +:103070000C0C0C00FFDF05E0287E112802D0FFDFDA +:1030800000E0FFDF2C7630BD2DE9F0410FF09CFB16 +:10309000044610F038FD201AC5B206200DF030FCB1 +:1030A000044606200DF034FC211ADD4C207E122847 +:1030B00018D000200F1807200DF022FC064607202C +:1030C0000DF026FC301A3918207E13280CD0002071 +:1030D0000144A078042809D000200844281AC0B26E +:1030E000BDE8F0810120E5E70120F1E70120F4E7E8 +:1030F000CB4810B590F825004108C94800F12600DA +:1031000005D00BF0B6FABDE8104005F0AFBF0BF0EC +:1031100089FAF8E730B50446A1F120000D460A28E7 +:103120004AD2DFE800F005070C1C2328353A3F445B +:10313000FFDF42E0207820283FD1FFDF3DE0B848A4 +:103140008178052939D0007E122836D020782428AD +:1031500033D0252831D023282FD0FFDF2DE0207851 +:1031600022282AD0232828D8FFDF26E0207822280A +:1031700023D0FFDF21E0207822281ED024281CD075 +:1031800026281AD0272818D0292816D0FFDF14E0C7 +:103190002078252811D0FFDF0FE0207825280CD0DB +:1031A000FFDF0AE02078252807D0FFDF05E0207840 +:1031B000282802D0FFDF00E0FFDF257030BD10B50A +:1031C000012803D0022805D0FFDF10BDBDE8104064 +:1031D00003202BE79248007E122800D0FFDF002159 +:1031E000052011F04FF8BDE81040112036E71FB55B +:1031F00004466A46002001F01FFEB4B1BDF802206B +:103200004FF6FF700621824201D1ADF80210BDF8E1 +:103210000420824201D1ADF80410BDF808108142AB +:1032200003D14FF44860ADF8080068460BF089FF01 +:1032300005F01CFF04B010BD70B514460D460646DF +:1032400011F06CF858B90DB1A54201D90C2070BD30 +:10325000002408E056F8240011F060F808B11020AE +:1032600070BD641CE4B2AC42F4D3002070BD2DE903 +:10327000F04105461F4690460E460024006811F0B6 +:103280009AF808B110202BE728680028A88802D0F7 +:10329000B84202D84FE00028F5D0092020E728687E +:1032A000025DB2B1611C475C152F2DD03BDC3AD2D8 +:1032B000DFE807F03912222228282A2A3131393949 +:1032C00039393939393939392200025D32BB641C48 +:1032D000A4B2A142F9D833E0022ADED1A21C805C5C +:1032E00088F80000072801D2400701D40A20F7E639 +:1032F000307840F0010015E0D043C00707E0012A14 +:1033000007D010E00620EBE61007A0F1805000285F +:10331000F5D01846E4E63078820701D50B20DFE6C9 +:1033200040F0020030702868005D084484B2A8882C +:10333000A04202D2B1E74FF4485381B2A142AED8C5 +:103340000020CDE610B5027843F202235408012292 +:10335000022C12D003DC3CB1012C16D106E0032C68 +:1033600010D07F2C11D112E0002011E080790324CD +:10337000B4EB901F09D10A700BE08079B2EB901F7B +:1033800003D1F8E780798009F5D0184610BDFF20F9 +:103390000870002010BD224991F82E2042B191F80A +:1033A0002F10022909D0032909D043F202207047C7 +:1033B00001461B48253001F092BD032100E00121A8 +:1033C00001700020704738B50C460546694601F08B +:1033D00086FD00280DD19DF80010207861F347008C +:1033E000207055F8010FC4F80100A888A4F8050062 +:1033F000002038BD38B51378B0B1022814D0FF28AA +:103400001BD008A46D46246800944C7905EB9414F5 +:10341000247864F34703137003280AD010E00000F7 +:10342000D80100200302FF0123F0FE0313700228DD +:10343000F2D1D8B240F0010005E043F0FE00107078 +:10344000107820F0010010700868C2F80100888828 +:10345000A2F8050038BD02210DF0AABA38B50C4615 +:103460000978222901D2082038BDADF800008DF876 +:10347000022068460BF044F905F0F8FD050003D181 +:1034800021212046FFF746FE284638BD1CB5002006 +:103490008DF80000CDF80100ADF80500FE4890F869 +:1034A0002E00022801D0012000E000208DF8070046 +:1034B00068460BF056FB002800D0FFDF1CBD002241 +:1034C0000A80437892B263F345120A8043785B081E +:1034D00063F386120A8000780C282BD2DFE800F014 +:1034E0002A06090E1116191C1F220C2742F0110082 +:1034F00009E042F01D0008800020704742F01100F2 +:1035000012E042F0100040F00200F4E742F0100038 +:10351000F1E742F00100EEE742F0010004E042F082 +:103520000200E8E742F0020040F00400E3E742F066 +:103530000400E0E7072070472DE9FF478AB0002527 +:10354000BDF82C6082461C4690468DF81C507007D2 +:1035500003D5606810F0E2FE68B9CF4F4FF0010963 +:1035600097F82E0058B197F82F00022807D160680D +:1035700010F021FF18B110200EB0BDE8F087300721 +:1035800002D5A089802816D8700705D4B8F1000F9D +:1035900002D097F8240070B1E07DC0F300108DF8E0 +:1035A0001B00617D072041B1012906D00229E3D02B +:1035B0000429E1D12CE00720DEE749468DF8179079 +:1035C000F00609D4A27D072032B1012A04D0022AD4 +:1035D00005D0042AD0D11BE08DF8191002E002209A +:1035E0008DF819008DF815806068B0B107A9FFF754 +:1035F000A9FE0028C0D19DF81C00FF280AD06068F1 +:1036000050F8011FCDF80F108088ADF8130008E0C6 +:103610000620B1E743F20220AEE7CDF80F50ADF837 +:103620001350E07B0028F3D1207C0028F0D1607C8F +:103630000028EDD1A07C0028EAD1E07CC006E7D1CB +:103640008DF800A0BDF82C00ADF80200A068019034 +:10365000A068029004F10F0001F035FC8DF80C0019 +:103660000DF10D00FFF797FE00B1FFDF9DF81C0084 +:103670008DF80E008DF816508DF81850E07D08A9D1 +:1036800000F00F008DF81A0068460BF036FF05F0C9 +:10369000EDFC71E7F0B59DB000228DF868208DF843 +:1036A00058208DF8602005468DF86C2012921392F8 +:1036B0001492159219B10FC912AC84E80F00764C20 +:1036C000A078052801D004280CD11298616888429E +:1036D00000D120B91498E168884203D110B10820C4 +:1036E0001DB0F0BD1F26334618AA1AA912A8FFF76D +:1036F000BEFD0028F4D133461BAA16A914A8FFF773 +:10370000B6FD0028ECD19DF85800C00701D00A2072 +:10371000E6E7A08A410708D4A17D31B19DF8601089 +:10372000890702D043F20120DAE79DF86010C9074B +:1037300009D0400707D4208818B144F2506188426C +:1037400001D90720CCE78DF8005003268DF80160E1 +:1037500001278DF80270BDF84C208DF8032001A8D8 +:10376000129920F025FD68460BF028FF05F07EFC3D +:103770000028B5D18DF824508DF825608DF826707D +:10378000BDF854208DF827200AA8149920F010FDC8 +:1037900009A80BF060FF05F069FC0028A0D112AD6C +:1037A000241D95E80F0084E80F00002098E770B50D +:1037B00086B00D46040005D010F0FDFD20B11020AC +:1037C00006B070BD0820FBE72078C107A98802D0A9 +:1037D000FF2902D303E01F2901D20920F0E7800767 +:1037E00061D4FFF751FC38B12078C0F3C101012941 +:1037F00004D0032902D005E01320E1E7264991F81F +:10380000241041B1C0074FF000054FF0010604D06D +:103810008DF80F6003E00720D2E78DF80F5068465F +:10382000FFF7B9FD00B1FFDF2078C0F3C1008DF8CC +:1038300001008DF80250607808B98DF80260607858 +:10384000C00705D09DF8020040F001008DF802008D +:103850006078800705D59DF8020040F002008DF8E1 +:1038600002006078400705D59DF8020040F0040092 +:103870008DF802002078C0F380008DF80300608886 +:10388000ADF80600A088ADF80A00207A58B9607A31 +:1038900048B9A07A38B901E0D8010020E07A10B91F +:1038A000207BC00601D006208AE704F1080001F061 +:1038B0000AFB8DF80E0068460BF087F905F0D6FB81 +:1038C00000288BD18DF810608DF81150ADF8125092 +:1038D000ADF8145004A80BF0FDF905F0C7FB002863 +:1038E0008BD1E08864280AD248B1012001F001FBA5 +:1038F000002891D12078C00705D0152004E064216C +:10390000B0FBF1F0F2E71320FFF7A8FB002057E728 +:103910002DE9FF470220FF4E8DF804000027708E2E +:10392000ADF80600B84643F202094CE001A80CF0DD +:10393000A6FF050006D0708EA8B3A6F83280ADF8B9 +:1039400006803EE0039CA07F01072DD504F12400F2 +:103950000090A28EBDF80800214604F1360301F064 +:1039600054FC050005D04D452AD0112D3CD0FFDF79 +:103970003AE0A07F20F00801E07F420862F3C7111F +:10398000A177810861F30000E07794F8210000F04E +:103990001F0084F820002078282826D129212046DD +:1039A000FFF7B8FB21E014E040070AD5BDF8080096 +:1039B00004F10E0101F0ABFA05000DD04D4510D118 +:1039C00000257F1CFFB202200CF09AFF401CB84279 +:1039D000ACD8052D11D008E0A07F20F00400A0771E +:1039E00003E0112D00D0FFDF0025BDF80600708632 +:1039F000052D04D0284604B0BFE5A6F8328000208B +:103A0000F9E770B50646FFF726FD054605F002FD0D +:103A1000040000D1FFDF6680207820F00F00801CBA +:103A200020F0F000203020700620207295F83E0033 +:103A30006072BDE8704005F0F0BC2DE9F04786B03B +:103A4000040000D1FFDF2078B24D20F00F00801C71 +:103A500020F0F0007030207060680178491F1B2949 +:103A600033D2DFE801F0FE32323255FD320EFDFD79 +:103A700042FC32323278FCFCFB323232FCFCFAF986 +:103A8000FC00C6883046FFF7E6FC0546304607F0E6 +:103A9000A7F8E0B16068007A85F83E002121284649 +:103AA000FFF738FB3046FEF7CEFA304603F016FE3D +:103AB0003146012010F0E6FBA87F20F01000A87727 +:103AC000FFF726FF002800D0FFDF06B055E520787D +:103AD00020F0F000203020700620207266806068A0 +:103AE000007A607205F099FCD8E7C5882846FFF790 +:103AF000B2FC00B9FFDF60680079012800D0FFDF69 +:103B00006068017A06B02846BDE8F04707F044BC7B +:103B1000C6883046FFF79FFC050000D1FFDF05F0A7 +:103B20007CFC606831460089288160684089688132 +:103B300060688089A881012010F0A4FB0020A8758E +:103B4000A87F00F003000228BFD1FFF7E1FE0028A4 +:103B5000BBD0FFDFB9E70079022811D000B1FFDF49 +:103B600005F05BFC6668B6F806A0307A361D0128C1 +:103B70000CD0687E814605F0E5F9070009D107E021 +:103B800006B00220BDE8F047FFF719BBE878F1E77F +:103B9000FFDF0022022150460CF001FF040000D19B +:103BA000FFDF22212046FFF7B5FA3079012800D047 +:103BB0000220A17F804668F30101A177308B20812C +:103BC000708B6081B08BA08184F822908DF8088082 +:103BD000B8680090F86801906A46032150460CF0DE +:103BE000DEFE00B9FFDFB888ADF81000B8788DF8B8 +:103BF000120004AA052150460CF0D1FE00B9FFDFE7 +:103C0000B888ADF80C00F8788DF80E0003AA0421EE +:103C100050460CF0C4FE00B9FFDF062106F1120089 +:103C200001F093F938B37079800700D5FFDF71791F +:103C3000E07D61F34700E075D6F80600A061708969 +:103C4000A083062106F10C0001F07FF9E8B195F898 +:103C500025004108607805E032E02AE047E03FE0D7 +:103C600021E035E061F347006070D5F82600C4F824 +:103C70000200688D12E0E07D20F0FE00801CE075FF +:103C8000D6F81200A061F08ADAE7607820F0FE0032 +:103C9000801C6070F068C4F80200308AE080404602 +:103CA000FFF78DFA11E706B02046BDE8F04701F0B6 +:103CB00035BD05F0B2FB15F8300F40F0020005E00D +:103CC00005F0ABFB15F8300F40F004002870FCE65F +:103CD000287E132809D01528E4D11620FFF7BEF955 +:103CE00006B0BDE8F04705F098BB1420F6E7A978C8 +:103CF000052909D00429D5D105F08FFB022006B093 +:103D0000BDE8F047FFF792B900790028CAD0E878FB +:103D100002E00000D801002001F0BCF805F07DFBB6 +:103D20000320ECE72DE9F05F054600784FF000082E +:103D30000009DFF820A891460C46464601287AD0B3 +:103D400001274FF0020C4FF6FF73022874D00728AA +:103D50000BD00A2871D0FFDFA9F8006014B1A4F8D5 +:103D6000008066800020BDE8F09F696804F10800CB +:103D70000A78172A70D010DC4FF0000B142A31D0CB +:103D800006DC052A6DD0092A0FD0102A7ED11FE04B +:103D9000152A7CD0162AF9D1F0E01B3A052A75D2F3 +:103DA000DFE802F009C5FDDAFC00C8884FF0120810 +:103DB0001026214675E14FF01C080A26D4B38888E6 +:103DC000A0806868807920726868C0796072C3E7F3 +:103DD0004FF01B0814266CB303202072686880889B +:103DE000A080B9E70A793C2AB6D00D1D4FF0100823 +:103DF0002C26FCB16988A180298B6182298B2182C4 +:103E0000698BA182A98BE1826B790246A91D1846B4 +:103E1000FFF7F0FA2879012810D084F80FC0FF20AE +:103E20002076C4F81CB0C4F820B0C4F824B0C4F89C +:103E300028B091E712E013E13BE135E1E7730AF1C5 +:103E4000040084F818B090E80E00DAF81000C4E915 +:103E50000930C4E907127FE7A8E002E0A9F8006092 +:103E600080E72C264FF01D08002CF7D00546A380D4 +:103E7000887B2A880F1D60F300022A80887B400817 +:103E800060F341022A80887B800801E0E6E0ADE033 +:103E900060F382022A80887BB91CC00860F3C302E9 +:103EA0002A80B87A0011401C60F3041202F07F00EF +:103EB00028807878AA1CFFF79DFA387D05F1090261 +:103EC00007F11501FFF796FA387B01F04DF82874D9 +:103ED000787B01F049F86874F87EA874787AE87401 +:103EE00097F83B002875B87B6875A5F816B0DAF826 +:103EF0001C00A861397ABAF82000884201D2014634 +:103F000010E0B87AC0F3411002280BD0012809D084 +:103F1000288820F060002880A1840A4607F11C014F +:103F2000A86998E0288820F060004030F3E7112667 +:103F30004FF02008002C91D0A380686804F10A0299 +:103F4000007920726868007B607269688B1D48790F +:103F50001946FFF74FFAFFE60A264FF02108002C1A +:103F6000E9D08888A0806868807920726868C07904 +:103F700060729AF8301021F004018BE00B264FF0AC +:103F80002208002CD7D0C888A080686800792072E9 +:103F90006868007A00F0E8FF607201E052E039E002 +:103FA0006868407A00F0E0FFA072D5E61C264FF06A +:103FB0002608002CBFD0A3806868407960726868CA +:103FC000007AA0720AF1040090E80E00DAF81000FE +:103FD000C4E90530C4E90312686800793C2803D0BD +:103FE00043287DD0FFDFB7E62772B5E610264FF0F5 +:103FF0002408002C9FD08888A08068688079208160 +:104000006868807A608168680089A08168688089B2 +:10401000E081A1E610264FF02308002C8BD0888881 +:10402000A0806868C08820816868008960816868AD +:104030004089A08168688089E0819AF8301021F079 +:10404000020127E030264FF02508002C88D0A380FD +:1040500069682822496820F0ABF87DE64A4677E097 +:10406000287A012803D0022817D0FFDF74E6102633 +:104070004FF01F08002C85D06888A080A889208177 +:10408000E8896081288AA081688AE0819AF83010E6 +:1040900021F001018AF830105EE64FF01208102678 +:1040A000688800F03FFF57E62846BDE8F05F01F062 +:1040B000BFBC287A07284DD2DFE800F04C38384AD8 +:1040C0004A4A040009264FF01108002C92D06F884C +:1040D0003846FFF7C0F990F822A0A780687A00E080 +:1040E0002DE02072042138460CF074FC052138467E +:1040F0000CF070FC002138460CF06CFC01213846B5 +:104100000CF068FC032138460CF064FC02213846B0 +:104110000CF060FC062138460CF05CFC07213846A8 +:104120000CF058FC504600F0B5FE15E614264FF092 +:104130001B08002C8AD0A380287A012802D084F89A +:1041400008C009E62772DAE90710C4E9031003E69C +:104150002146A9E7FFDFFFE570B5FE4D287E122856 +:1041600001D0082070BD0AF0C3FF04F07FFF0400F7 +:1041700002D1687E00F08EFE0021052010F082F84A +:10418000204670BD1CB5F348007E132801D20820DC +:104190001CBD00208DF8000068460AF09BFD04F06D +:1041A00065FF0028F4D10021052010F06BF81120E4 +:1041B000FEF754FF00201CBD70B5012805D005286E +:1041C00025D0062800D0FFDF70BD8DB22846FFF74E +:1041D00042F9040000D1FFDF20782128F4D005F057 +:1041E00019F968B1017821F00F01891C21F0F00163 +:1041F000103101700221017245800020A07528E075 +:1042000021462846BDE870401322FFF727B9D14860 +:10421000047EA4F1120005281FD2DFE800F0060397 +:1042200003030300FFF7AEFF01E0FFF795FF00284F +:10423000CAD105F0EFF80028C6D0017821F00F01AF +:10424000891C21F0F00120310170132C07D00221CC +:104250000172BDE8704005F0E0B8FFDF70BD0121DC +:10426000F6E72DE9F04116460C00804600D1FFDF4D +:10427000307820F00F00801C20F0F00010303070FB +:104280002078012804D0022818D0FFDFBDE8F08193 +:104290004046FFF7E0F8050000D1FFDF0320A875D6 +:1042A00005F0BBF894E80F00083686E80F00A9482F +:1042B00010F8301F41F001010170E7E74046FFF7B9 +:1042C000CAF8050000D1FFDFA1884FF6FF70002774 +:1042D000814202D1E288824203D0814201D1E0884A +:1042E00040B105F09AF894E80F00083686E80F0010 +:1042F000AF75CBE7A87D0128C8D1782300224146BD +:104300000FF016FF0220A875C0E738B505460C4629 +:10431000084610F003F818BB203D062D4AD2DFE80E +:1043200005F0031B373C4230002106200FF080FFD0 +:1043300008B1112038BDA01C0AF0AFFF04F096FEB2 +:10434000050038D100220823114606200FF0F0FEA8 +:10435000062830D0FFDF2EE0606810F023F808B1A7 +:10436000102038BD618820886A460BF05FFB04F09E +:104370007DFE05001FD16068E8B1BDF80010018026 +:1043800019E0A07800F0010120880BF085FB0EE019 +:10439000206801F0FBFD05460DE0207800F00100EB +:1043A0000AF033F903E0618820880BF0C4FA04F0C6 +:1043B0005DFEF0E70725284638BD70B505460C467A +:1043C00008460FF0D1FF08B1102070BD202D07D096 +:1043D000212D0DD0222D0BD0252D09D0072070BD09 +:1043E0002088A11C0AF006FABDE8704004F03EBE29 +:1043F000062070BD57482530704708B53421554810 +:104400001FF077FF0120FEF711FE1120FEF726FEB8 +:1044100050496846263104F093FF4E489DF800202D +:1044200010F8251F62F3470121F0010101700021FE +:1044300041724FF46171A0F8071002218172FEF7FA +:1044400057FE00B1FFDFFCF791FF01F032F908BD24 +:1044500010B50C46402120461FF029FFA07F20F018 +:104460000300A077202020700020A07584F823008E +:1044700010BD70472DE9FC4107460FF04FFF10B10A +:104480001020BDE8FC81334E06F12501D6F8250049 +:104490000090B6F82950ADF8045096F82B408DF8EE +:1044A00006403846FEF78FFF0028EAD1FEF720FECF +:1044B0000028E6D0009946F8251FB580B471E0E7E2 +:1044C00010B504460FF050FF08B1102010BD214870 +:1044D0002049224690F8250026314008FEF78AFF41 +:1044E000002010BDFEB50D4604004FF0000712D0AD +:1044F0000822FEF7A1FE002812D1002609E000BF25 +:1045000054F826006946FEF71DFF002808D1761CE6 +:10451000F6B2AE42F4D309F07CFF10B143F20320AF +:10452000FEBD0C4E86F8247024B300271EE000BFA9 +:1045300054F8270002A9FEF705FF00B1FFDF9DF840 +:1045400008008DF8000054F8270050F8011FCDF83E +:10455000011001E0D80100208088ADF80500684610 +:1045600009F0A1FF00B1FFDF7F1CFFB2AF42DFD334 +:1045700086F824500020FEBD2DE9F0478AB015468C +:10458000894604001ED00F4608222946FEF754FE35 +:10459000002810D1002613E054F826006946103098 +:1045A00000F09DFC002806D147B157F826000FF017 +:1045B000B5FE18B110200AB0BDE8F087761CF6B23F +:1045C000AE42E9D30026A5F101081BE006F1010A7D +:1045D0000AF0FF0712E000BF54F82600017C4A08E9 +:1045E00054F827100B7CB2EB530F05D10622113083 +:1045F00011311FF0B1FD58B17F1CFFB2AF42EBD3B8 +:104600000AF0FF064645E1DB4E4624B1012003E0F7 +:1046100043F20520CFE7002009F076FF10B909F03A +:1046200087FF10B143F20420C5E75CB300270DF10A +:10463000170825E054F827006946103000F04FFCB9 +:1046400000B1FFDF54F82700102250F8111FCDF8F9 +:1046500001108088ADF8050054F827100DF107000F +:104660001FF0A6FD96B156F82710102240461FF005 +:104670009FFD684609F0F0FE00B1FFDF7F1CFFB22E +:10468000AF42D7D3FEF702FF002094E7404601F087 +:1046900071FCEEE730B585B004460FF03FFE18B967 +:1046A00060680FF088FE10B1102005B030BD608842 +:1046B0004AF2B811884206D82078FB4D28B101286B +:1046C00006D0022804D00720EFE7FEF711FD18E01E +:1046D0006078022804D0032802D043F20220E4E7E5 +:1046E00085F82F00C1B200200090ADF80400022927 +:1046F0002CD0032927D0FFDF684609F0BAFF04F069 +:10470000B5FC0028D1D1606801F027FC207858B1B1 +:1047100001208DF800000DF1010001F02BFC68462E +:104720000BF018FA00B1FFDF207885F82E00FEF7B5 +:10473000ADFE608860B1A88580B209F0DDFE00B1F1 +:10474000FFDF0020B1E78DF80500D5E74020FAE74C +:104750004FF46170EFE710B504460FF005FE20B985 +:10476000606838B10FF01EFE08B1102010BD6068FF +:1047700001F000FCCC4830F82C1F6180C1786170DA +:1047800080782070002010BD2DE9F843144689463A +:1047900006460FF0E9FDA0B948460FF00CFE80B9BF +:1047A00020460FF008FE60B9BF4DA878012800D15F +:1047B0003CB13178FF2906D049B143F20400BDE88D +:1047C000F8831020FBE7012801D00420F7E74FF021 +:1047D0000008A4B3052811D004280FD0694620464C +:1047E000FEF76DFE0028EAD1207D48B1012809D0EE +:1047F000022809D0032809D00720E0E70820DEE7D7 +:10480000424604E0012202E0022200E003222346A5 +:10481000174600200099FEF78FFE0028CFD1A0890F +:104820002880A07BE875BDF80000A882AF75BDF8B0 +:104830000000000701D5A08988B1A08928804946D9 +:104840000020FEF727FF0028B9D1A87805280BD053 +:10485000042809D0287DC00703D0032002E080206F +:10486000ECE70220FEF7E2FB86F800800020A6E7D6 +:104870007CB58D4C05460E46A078022803D003284F +:1048800001D008207CBD15B143F204007CBD072097 +:104890000CF03EF810B9A078032806D0FEF7F4FB20 +:1048A00028B1A078032804D009E012207CBD132091 +:1048B0007CBD304600F0CDFA0028F9D1E670012029 +:1048C0008DF800008DF801008DF802502088ADF8B9 +:1048D0000400E07D8DF8060068460AF0EAFF04F067 +:1048E000C5FB0028E4D1A078032805D05FF00400C0 +:1048F000FEF79CFB00207CBDE07800F0BAFA0520B2 +:10490000F6E71CB510B143F204001CBD664CA0785C +:10491000042803D0052801D008201CBD00208DF8F4 +:10492000000001218DF801108DF8020068460AF0A0 +:10493000C0FF04F09BFB0028EFD1A078052805D02C +:104940005FF00200FEF772FB00201CBDE07800F073 +:10495000A1FA0320F6E72DE9FC4180460E46032527 +:1049600008460FF028FD002866D14046FEF773FD8B +:10497000040004D02078222804D2082081E543F2E4 +:1049800002007EE5A07F00F003073EB1012F0CD0AE +:1049900000203146FEF72BFC0500EFD1012F06D099 +:1049A000022F1AD0FFDF28466BE50120F1E7A07D3A +:1049B0003146022801D011B107E0112061E56846B7 +:1049C000FCF7E1FD0028D9D16946404606F0A7FC76 +:1049D0000500E8D10120A075E5E7A07D032804D1FA +:1049E000314890F83000C00701D02EB30EE026B158 +:1049F000A07F40071ED4002100E00121404606F0C0 +:104A0000AEFC0500CFD1A075002ECCD0314640467B +:104A100000F07DFA05461128C5D1A07F4107C2D418 +:104A2000316844F80E1F7168616040F00400207422 +:104A30000025B8E71125B6E7102022E570B50C4631 +:104A40000546FEF708FD010005D022462846BDE8D0 +:104A50007040FEF703BD43F2020070BD10B501289F +:104A600007D1114B9B78012B00D011B143F2040008 +:104A700010BD09F084FDBDE8104004F0F7BA012331 +:104A800000F012BA00231A46194600F00DBA70B5AC +:104A900006460C4608460FF041FC18B920680FF096 +:104AA00063FC18B1102070BDD8010020F74D2A7E9C +:104AB000112A04D0132A00D33EB10820F3E721467F +:104AC0003046FEF774FE60B1EDE70920132A0DD0E1 +:104AD000142A0BD0A188FF29E5D31520FEF7BEFAD2 +:104AE0000020D4E90012C5E90712DCE7A1881F29DC +:104AF000D9D31320F2E72DE9F047DFF8908307467A +:104B000090B098F818009A4615460C46132803D31F +:104B1000FFF738FB002822D120460FF0FFFBA0BB97 +:104B200028460FF0FBFB80BB20784FF00101C00747 +:104B30004FF0000602D08DF83A1001E08DF83A608F +:104B40002078C0F3C1008DF800006278072042B1E0 +:104B5000012A06D0022A02D0042A00D1062010B071 +:104B60002AE58DF809106088ADF80A00A088ADF834 +:104B7000100020788946C0F3C10001281FD0032807 +:104B80001DD038460FF0CAFB08B11020E7E738788F +:104B9000400808D0012809D0022807D0032805D0F2 +:104BA00043F20220DBE78DF8026001E08DF802900D +:104BB00057F8010FCDF80300B888ADF807000DF1E4 +:104BC0000100FEF7E8FB08B10320C8E72888ADF82C +:104BD00016006888ADF81C00A888ADF82200E888A7 +:104BE000ADF82800ADF82E60ADF8346068460AF0E4 +:104BF000BDF8E8B998F818004546112801D00820FA +:104C0000ADE706200BF084FE38B12078C0F3C10078 +:104C1000012804D0032802D004E012209FE795F871 +:104C2000240028B1FEF730FA022803D2132096E7B9 +:104C3000072094E7504600F00CF900288FD185F842 +:104C400019A068460AF051FA04F010FA002886D13B +:104C5000687E00F00EF9E08864280AD248B101208D +:104C600000F047F9040091D11220FEF7F7F9204631 +:104C700075E76421B0FBF1F0F2E770B50646154622 +:104C80000C4608460FF070FB18B928460FF06CFB75 +:104C900008B1102007E72A46214630460AF0A9FE4F +:104CA00004F0E4F90028F5D121787F29F2D105201C +:104CB000F9E67CB505460C4608460FF02FFB08B117 +:104CC00010207CBD2846FEF7C6FB20B100782228C4 +:104CD00004D208207CBD43F202007CBD6B4890F8F2 +:104CE0003000400701D511207CBD2178C80802D1D1 +:104CF0006078C20801D007207CBD890801D18008F6 +:104D000001D006207CBDADF8005020788DF802005F +:104D100060788DF803000220ADF80400684609F0C1 +:104D200042FF04F0A3F97CBD70B586B014460D4671 +:104D30000646FEF790FB28B10078222805D208200D +:104D400006B0B0E643F20200FAE728460FF033FB64 +:104D500020B944B120460FF025FB08B11020EFE741 +:104D600000202060A080494890F83000800701D5DD +:104D70001120E5E703A9304609F0BDFD18B100BFD9 +:104D800004F074F9DCE7ADF80060BDF81400ADF88C +:104D90000200BDF81600ADF80400BDF81000BDF823 +:104DA0001210ADF80600ADF808107DB1298809B1E0 +:104DB000ADF80610698809B1ADF80210A98809B1EB +:104DC000ADF80810E98809B1ADF80410DCB1BDF800 +:104DD0000610814201D9081A2080BDF80210BDF8E2 +:104DE0001400814201D9081A6080BDF80800BDF89E +:104DF0000410BDF816200144BDF812001044814291 +:104E000001D9081AA080684609F0AAFEB8E71CB5C7 +:104E10001F490968CDE90010684609F0AAFF04F0AF +:104E200025F91CBD1CB5002000900190684609F0D2 +:104E3000A0FF04F01BF91CBD108008885080488832 +:104E40009080C88810818888D0800020508190810F +:104E5000704710B5044604F075F830B1407830B1B1 +:104E6000204604F07EFB002010BD052010BD12205E +:104E700010BD10B504F066F8040000D1FFDF6078C3 +:104E800000B9FFDF6078401E607010BDD8010020BF +:104E90009C46020010B504F055F8040000D1FFDF75 +:104EA0006078401C6070F0E71CB5ADF800008DF82C +:104EB00002308DF803108DF8042068460AF05EFD7C +:104EC00004F0D4F81CBD0CB52DA2D2E90012CDE936 +:104ED00000120079694601EB501000780CBD027891 +:104EE000520804D0012A02D043F202207047FEF794 +:104EF00029BA10B548B183000022114605200FF0F1 +:104F000017F9052801D00320BFE70020BDE71FB532 +:104F10006A46FFF791FF68460AF04CF904F0A6F8DC +:104F200004B0B2E770B50C0006460DD0FEF793FA58 +:104F3000050000D1FFDFA6802889208128896081B3 +:104F40006889A081A889E081ADE510B500231A46E3 +:104F500003E0845C2343521CD2B28A42F9D30BB1E2 +:104F6000002092E7012090E700B530B1012803D07E +:104F7000022801D0FFDF002000BDFF2000BD00009F +:104F8000070605040302010010B504460FF0C6F938 +:104F900008B1102010BD2078C0F30210042807D8F3 +:104FA0006078072804D3A178102901D8814201D262 +:104FB000072010BDE078410706D421794A0703D4C1 +:104FC000000701D4080701D5062010BD002010BD40 +:104FD00010B513785C08837F64F3C7138377137865 +:104FE0009C08C37F64F30003C3771078C309487833 +:104FF00063F34100487013781C090B7864F347137E +:105000000B701378DB0863F3000048705078487128 +:1050100010BD10B5C4780B7864F300030B70C4782E +:10502000640864F341030B70C478A40864F382033A +:105030000B70C478E40864F3C3030B700379117830 +:1050400063F30001117003795B0863F34101117090 +:1050500003799B0863F3820111700079C00860F343 +:10506000C301117010BD70B514460D46064604F01C +:10507000D1F980B10178182221F00F01891C21F0AB +:10508000F001A03100F8081B21461FF0D6F8BDE85A +:10509000704004F0C2B929463046BDE87040132282 +:1050A000FEF7DCB92DE9F047064608A8894690E8E6 +:1050B00030041F469046142128461FF01AF900219B +:1050C000CAF80010B8F1000F03D0B9F1000F03D1F6 +:1050D00014E03878C00711D020680FF045F9C0BB44 +:1050E000B8F1000F07D12068123028602068143012 +:1050F00068602068A8602168CAF8001038788007C6 +:1051000024D560680FF04EF918BBB9F1000F21D01B +:10511000FFF770F90168C6F868118188A6F86C116C +:10512000807986F86E0101F002FDF94FEF60626848 +:1051300062B196F8680106F2691140081032FEF774 +:1051400059F91022394660681FF032F80020BDE896 +:10515000F08706E0606820B1E8606068C6F8640126 +:10516000F4E71020F3E730B5054608780C4620F048 +:105170000F00401C20F0F001103121700020607001 +:1051800095F8230030B104280FD0052811D0062847 +:1051900014D0FFDF20780121B1EB101F04D295F865 +:1051A000200000F01F00607030BD21F0F0002030C2 +:1051B00002E021F0F00030302070EBE721F0F00049 +:1051C0004030F9E7F0B591B0022715460C46064687 +:1051D0003A46ADF80870092103AB04F07AFF049059 +:1051E000002810D004208DF804008DF80170E03400 +:1051F000099605948DF818500AA968460DF0CAF86A +:1052000000B1FFDF012011B0F0BD10B588B00C4631 +:105210000A99ADF80000C3B11868CDF802005868CB +:10522000CDF80600ADF80A20102203A81EF0C0FF3A +:1052300068460AF062F803F019FF002803D1A17F45 +:1052400041F01001A17708B010BD0020CDF8020098 +:10525000E6E72DE9F84F0646808A0D4680B2824681 +:10526000FEF7F9F804463078DFF8A48200274FF003 +:105270000509A8F120080F2870D2DFE800F06FF2CE +:105280003708387D8CC8F1F0EFF35FF3F300A07FAF +:1052900000F00300022809D05FF0000080F0010157 +:1052A00050460BF085FB050003D101E00120F5E736 +:1052B000FFDF98F85C10C90702D0D8F860000BE057 +:1052C000032105F11D000EF004FDD5F81D009149E4 +:1052D000B0FBF1F201FB1200C5F81D0070686867B1 +:1052E000B068A8672078252800D0FFDFCAE0A07F3B +:1052F00000F00300022809D05FF0000080F00101F7 +:1053000050460BF055FB060003D101E00120F5E704 +:10531000FFDF3078810702D52178252904D040F0BD +:1053200001003070BDE8F88F02202870307F2871AE +:1053300006F11D002D36C5E90206F3E7A07F00F057 +:105340000300022808D0002080F0010150460BF035 +:105350002FFB040004D102E00120F5E7A7E1FFDF05 +:105360002078C10604D5072028703D346C60D9E749 +:1053700040F008002070D5E7E07F000700D5FFDF90 +:10538000307CB28800F0010301B05046BDE8F04F18 +:10539000092105F027BD04B9FFDF716821B1102292 +:1053A00004F124001EF004FF28212046FDF7B2FE80 +:1053B000A07F00F0030002280ED104F12400002396 +:1053C00000901A4621465046FFF71FFF112807D0CC +:1053D00029212046FDF79EFE307A84F82000A1E7BF +:1053E000A07F000700D5FFDF14F81E0F40F0080073 +:1053F0002070E782A761E761C109607861F341002D +:10540000014660F382016170307AE0708AE7A07F24 +:1054100000F00300022809D05FF0000080F00101D5 +:1054200050460BF0C5FA040003D101E00120F5E776 +:10543000FFDF022104F185000EF04BFC04202870F0 +:1054400004F5B4706860B4F88500288230481038DC +:105450007C346C61C5E9028064E703E024E15BE031 +:105460002DE015E0A07F00F00300022807D0002007 +:1054700080F0010150460BF09BFA18B901E00120C1 +:10548000F6E7FFDF324621465046BDE8F84FEAE531 +:1054900004B9FFDF20782128A1D93079012803D170 +:1054A000E07F40F00800E077324621465046FFF7A3 +:1054B000DAFD2046BDE8F84F2321FDF72BBE3279F7 +:1054C000AA8005F108030921504604F002FEE860B5 +:1054D00010B185F8009025E7A07F00F003000228B6 +:1054E00008D0002080F0010150460BF061FA040062 +:1054F00003D101E00120F5E7FFDF04F1620102239F +:105500001022081F0BF0DBF807703179417009E7B2 +:105510003802002040420F00A07F00F00300022864 +:1055200008D0002080F0010150460BF041FA050040 +:1055300003D101E00120F5E7FFDF95F8840000F0DA +:10554000030001287AD1A07F00F00307E07F10F06C +:10555000010602D0022F04D133E095F8A000C00765 +:105560002BD0D5F8601121B395F88320087C62F325 +:1055700087000874A17FCA09D5F8601162F3410061 +:105580000874D5F8601166F300000874AEB1D5F860 +:105590006001102204F1240188351EF009FE287EE6 +:1055A00040F001002876287820F0010005F88809ED +:1055B00000E016B1022F04D02DE095F88800C00756 +:1055C00027D0D5F85C1121B395F88320087C62F3CD +:1055D00087000874A17FCA09D5F85C1162F3410005 +:1055E0000874D5F85C1166F3000008748EB1D5F824 +:1055F0005C01102204F1240188351EF0D9FD2878C1 +:1056000040F0010005F8180B287820F0010005F89B +:10561000A009022F44D0002000EB400005EBC000A1 +:1056200090F88800800709D595F87C00D5F86421AA +:10563000400805F17D011032FDF7DCFE8DF8009089 +:1056400095F884006A4600F003008DF8010095F893 +:1056500088108DF8021095F8A0008DF803002146FF +:10566000504601F04DFA2078252805D0212807D092 +:10567000FFDF2078222803D922212046FDF74AFDAA +:10568000A07F00F0030002280CD0002080F0010170 +:1056900050460BF09FF900283FF44FAEFFDF41E684 +:1056A0000120B9E70120F1E7706847703AE6FFDFB3 +:1056B00038E670B5FE4C002584F85C5025660CF089 +:1056C00036FE04F11001204603F060FE84F83050ED +:1056D00070BD70B50D46FDF7BEFE040000D1FFDFC2 +:1056E0004FF4B87128461EF004FE04F1240028612E +:1056F000A07F00F00300022808D0012105F1E0009E +:105700000CF016FE002800D0FFDF70BD0221F5E787 +:105710000A46014602F1E0000CF02ABE70B50546CB +:10572000406886B001780A2906D00D2933D00E29A9 +:105730002FD0FFDF06B070BD86883046FDF78BFEA8 +:10574000040000D1FFDF20782128F3D028281BD1C6 +:10575000686802210E3001F0C8F9A8B16868082114 +:10576000801D01F0C2F978B104F1240130460AF03D +:10577000A2F803F07BFC00B1FFDF06B02046BDE8D5 +:1057800070402921FDF7C6BC06B0BDE8704003F0AB +:1057900044BE012101726868C6883046FDF75BFE91 +:1057A000040000D1FFDFA07F00F00301022902D135 +:1057B00020F01000A077207821280AD06868017AAC +:1057C00009B1007980B1A07F00F00300022862D007 +:1057D000FFDFA07F00F003000228ABD1FEF798F8AE +:1057E0000028A7D0FFDFA5E703F017FEA17F08067A +:1057F0002BD5E07FC00705D094F8200000F01F00F3 +:10580000102820D05FF0050084F823002078292894 +:105810001DD02428DDD1314604200EF033FD222195 +:105820002046FDF777FCA07F00F00300022830D06F +:105830005FF0000080F0010130460BF0CBF800284B +:10584000C7D0FFDFC5E70620DEE70420DCE701F074 +:105850000300022808D0002080F0010130460BF040 +:10586000A7F8050003D101E00120F5E7FFDF2521BE +:105870002046FDF74FFC03208DF80000694605F136 +:10588000E0000CF06CFD0228A3D00028A1D0FFDFBF +:105890009FE70120CEE703F0C0FD9AE72DE9F04332 +:1058A00087B09946164688460746FDF7D4FD0400A2 +:1058B0004BD02078222848D3232846D0E07F000709 +:1058C00043D4A07F00F00300022809D05FF000005D +:1058D00080F0010138460BF06BF8050002D00CE0B7 +:1058E0000120F5E7A07F00F00300022805D0012188 +:1058F000002238460BF053F805466946284601F069 +:1059000026F9009800B9FFDF45B10098E035056140 +:105910002078222806D0242804D007E0009900200F +:10592000086103E025212046FDF7F4FB00980121E2 +:1059300041704762868001A9C0E902890CF02AFD06 +:10594000022802D0002800D0FFDF07B0BDE8F083B6 +:1059500070B586B00546FDF77EFD017822291ED977 +:10596000807F00F00300022808D0002080F00101B1 +:1059700028460BF01DF804002FD101E00120F5E7C7 +:10598000FFDF2AE0B4F85E0004F1620630440178DB +:10599000427829B121462846FFF714FCB0B9C9E680 +:1059A000ADF804200921284602AB04F092FB0390D5 +:1059B0000028F4D005208DF80000694604F1E000CD +:1059C0000CF0CDFC022801D000B1FFDF0223102231 +:1059D000314604F15E000AF0A8FEB4F86000002829 +:1059E000D0D1A7E610B586B00446FDF734FD0178A6 +:1059F00022291BD9807F00F00300022808D0002054 +:105A000080F0010120460AF0D3FF040003D101E039 +:105A10000120F5E7FFDF06208DF80000694604F15C +:105A2000E0000CF09CFC002800D0FFDF06B010BDA9 +:105A30002DE9F05F05460C460027007890460109E5 +:105A40003E4604F1080BBA4602297DD0072902D050 +:105A50000A2909D146E0686801780A2905D00D298C +:105A600030D00E292ED0FFDFBCE114271C26002CDD +:105A70006BD08088A080FDF7EEFC5FEA000900D1C2 +:105A8000FFDF99F817005A46400809F11801FDF7A1 +:105A9000B1FC6868C0892082696851F8060FC4F8B3 +:105AA00012004868C4F81600A07E20F0060001E04D +:105AB0001802002040F00100A07699F81E0040F086 +:105AC00020014DE01A270A26002CD1D0C088A080E2 +:105AD000FDF7C1FC050000D1FFDF59462846FFF75E +:105AE00042FB7FE10CB1A88BA080287A0B287DD0E7 +:105AF00006DC01287BD0022808D0032804D135E039 +:105B00000D2875D00E2874D0FFDF6BE11E27092603 +:105B1000002CADD0A088FDF79EFC5FEA000900D103 +:105B2000FFDF287B00F003000128207A1BD020F043 +:105B300001002072297B890861F341002072297BD2 +:105B4000C90861F3820001E041E1F2E02072297BA3 +:105B5000090961F3C300207299F81E0040F040016A +:105B600089F81E103EE140F00100E2E713270D2600 +:105B7000002CAAD0A088FDF76EFC8146807F00F043 +:105B80000300022808D0002080F00101A0880AF05C +:105B90000FFF050003D101E00120F5E7FFDF99F8D1 +:105BA0001E0000F00302022A50D0686F817801F0D5 +:105BB00003010129217A4BD021F001012172837860 +:105BC0009B0863F3410121728378DB0863F3820150 +:105BD000217283781B0963F3C3012172037863F395 +:105BE00006112172437863F3C71103E061E0A9E075 +:105BF00090E0A1E0217284F809A0C178A172022A84 +:105C000029D00279E17A62F30001E1720279520847 +:105C100062F34101E1720279920862F38201E1725A +:105C20000279D20862F3C301E1724279217B62F307 +:105C3000000121734279520862F3410121734279D4 +:105C4000920862F382012173407928E0A86FADE7E2 +:105C500041F00101B2E74279E17A62F30001E172B9 +:105C60004279520862F34101E1724279920862F38B +:105C70008201E1724279D20862F3C301E1720279D2 +:105C8000217B62F3000121730279520862F3410122 +:105C900021730279920862F3820121730079C008AE +:105CA00060F3C301217399F80000232831D926211C +:105CB00040E018271026E4B3A088FDF7CCFB83460C +:105CC000807F00F00300022809D0002080F001014D +:105CD000A0880AF06DFE5FEA000903D101E001200F +:105CE000F4E7FFDFE868A06099F8000040F00401E5 +:105CF00089F8001099F80100800708D50120207369 +:105D00009BF8000023286DD92721584651E084F8DC +:105D10000CA067E015270F265CB1A088FDF79BFB60 +:105D2000814606225946E86808F059F90120A07317 +:105D3000A2E041E048463CE016270926E4B3287B70 +:105D400020724FE0287B19270E26ACB3C4F808A0B8 +:105D5000A4F80CA0012807D0022805D0032805D0FC +:105D6000042803D0FFDF0DE0207207E0697B0428E0 +:105D700001F00F0141F0800121721ED0607A20F005 +:105D800003006072A088FDF766FB054600782128B5 +:105D900028D0232800D0FFDFA87F00F003000228CE +:105DA00013D0002080F00101A0880AF013FE222108 +:105DB0002846FDF7AFF915E004E0607A20F0030013 +:105DC000401CDEE7A8F8006011E00120EAE70CB112 +:105DD0006888A080287A03282ED004280AD00528B5 +:105DE00050D0FFDFA8F800600CB12780668000204B +:105DF000BDE8F09F15270F26002CE3D0A088FDF703 +:105E00002AFB807F00F00300022809D05FF0000029 +:105E100080F00101A0880AF0CBFD050003D101E06C +:105E20000120F5E7FFDFD5F81D000622594608F0EE +:105E3000D6F884F80EA0D5E717270926002CC1D084 +:105E4000A088FDF708FB8146807F00F00300022850 +:105E500008D0002080F00101A0880AF0A9FD05000B +:105E600003D101E00120F5E7FFDF6878800701D565 +:105E7000022000E00120207299F800002328B1D907 +:105E8000272157E719270E26002C9BD0A088FDF765 +:105E9000E2FA5FEA000900D1FFDFC4F808A0A4F825 +:105EA0000CA084F808A0A07A40F00300A07299F832 +:105EB0001E10C90961F38200A07299F81F2099F899 +:105EC0001E1012EAD11F05D099F8201001F01F0111 +:105ED00010292BD020F00800A07299F81F10607ACA +:105EE00061F3C3006072697A01F003010129A2D154 +:105EF00040F00400607299F81E0000F003000228D0 +:105F0000E87A16D0217B60F300012173AA7A607BC6 +:105F100062F300006073EA7A520862F34101217370 +:105F2000A97A490861F3410060735BE740F008001B +:105F3000D2E7617B60F300016173AA7A207B62F390 +:105F400000002073EA7A520862F341016173A97A72 +:105F5000490861F34100207344E710B5FE4C30B1AD +:105F60000146102204F120001EF022F9012084F8DD +:105F7000300010BD10B5044600F0D9FDF6492046AA +:105F80001022BDE8104020311EF012B970B5F24D5C +:105F900006004FF0000413D00EF0C0F908B1102431 +:105FA0000CE00621304608F001F8411C05D02866B7 +:105FB0005FF0010085F85C0000E00724204670BD1A +:105FC0000020F7E7007810F00F0204D0012A05D076 +:105FD000022A0CD110E0000909D10AE000090128C9 +:105FE00007D0022805D0032803D0042801D00720B9 +:105FF00070470870002070470620704705282AD295 +:10600000DFE800F003070F171F00087820F0FF00FB +:106010001EE0087820F00F00401C20F0F000103047 +:1060200016E0087820F00F00401C20F0F00020302F +:106030000EE0087820F00F00401C20F0F000303017 +:1060400006E0087820F00F00401C20F0F0004030FF +:10605000087000207047072070472DE9F041804606 +:1060600088B00D46002708460EF0A5F9A8B94046AD +:10607000FDF7F1F9040003D02078222815D104E0BF +:1060800043F2020008B0BDE8F08145B9A07F4106A7 +:1060900003D500F00300022801D01020F2E7A07F12 +:1060A000C10601D4010702D50DB10820EAE7E17F5E +:1060B000090701D50D20E5E700F00300022805D10E +:1060C00025B12846FEF760FF0700DBD1A07F00F076 +:1060D0000300022808D0002080F0010140460AF0A9 +:1060E00067FC060002D00FE00120F5E7A07F00F07A +:1060F000030002280ED0002080F00101002240465B +:106100000AF04DFC060007D0A07F00F00300022833 +:1061100004D009E00120EFE70420B3E725B12A46C7 +:1061200031462046FEF754FF6946304600F00FFD29 +:10613000009800B9FFDF0099022006F1E0024870E4 +:10614000C1F824804A6100220A81A27F02F0030282 +:10615000022A1CD001200871287800F00102087E74 +:1061600062F3010008762A78520862F3820008760A +:106170002A78920862F3C30008762A78D20862F37C +:106180000410087624212046FCF7C4FF33E035B321 +:106190000871301D88613078400908777078C0F345 +:1061A00040004877287800F00102887F62F3010000 +:1061B0008877A27FD20962F382008877E27F62F358 +:1061C000C3008877727862F304108877A878C8775C +:1061D00001F1210228462031FEF71BFF03E00320D6 +:1061E00008710520087625212046FCF793FFA07F43 +:1061F00020F04000A07701A900980CF0CBF802280D +:1062000001D000B1FFDF38463CE72DE9FF4F534A8C +:106210000D4699B09A4607CA0BAB002783E80700E2 +:106220001998FDF718F9060006D03078262806D010 +:1062300008201DB0BDE8F08F43F20200F9E7B07FFF +:1062400000F00309B9F1020F03D00020284302D067 +:1062500006E00120FAE71B98FEF796FE0028E8D139 +:10626000B07F00F00300022801D11B9979BB0228FE +:1062700008D0002080F0010119980AF099FB040071 +:1062800003D101E00120F5E7FFDF852D28D007DCF1 +:10629000F5B1812D1ED0822D1ED0832D08D11DE099 +:1062A000862D1FD0882D1FD0892D1FD08A2D1FD05D +:1062B0000F2020710F281DD003F0ACF8E0B10120B1 +:1062C0008DF84000201D11902079B8B167E111E0F0 +:1062D0000020EEE70120ECE70220EAE70320E8E7F0 +:1062E0000520E6E70620E4E70820E2E70920E0E7EA +:1062F0000A20DEE707209CE711209AE7B9F1020F98 +:1063000003D0A56F03D1A06F02E0656FFAE7606F5D +:10631000804632D04FF0010000904FF00200019013 +:10632000214630461B9AFEF753FE1B98007800F07A +:106330000101A87861F30100A870B17FC90961F378 +:106340008200A870F17F61F3C300A870617861F3E7 +:106350000410A870207803E018020020A446020070 +:10636000400928706078C0F3400068701B988078FE +:10637000E87000206871287103E00220009001207D +:106380000190A87898F80210C0F3C000C1F3C001D2 +:1063900008405FEA000B2CD050460DF0BFFF90BBC9 +:1063A000DAF80C000DF0BAFF68BBDAF81C000DF04B +:1063B000B5FF40BBDAF80C00A060DAF81C00E06022 +:1063C00098F80100617800F0010041EA4000607037 +:1063D00098F80210C0B2C1F30011891E0840607025 +:1063E00000202077019906F1170002290CD0012125 +:1063F0000BE098F80110607801F00101FD2242EAFB +:1064000041010840E3E732E0002104EB81014861EB +:106410000099701C022901D0012100E0002104EB49 +:1064200081014861A87800F00300012858D198F84C +:10643000020000F00300012852D1B9F1020F04D08C +:106440002A1D691D1B98FEF7E4FD297998F80400C0 +:1064500001408DF83810687998F8052010408DF8C3 +:106460003C0001433CD050460DF058FF08B11020CD +:10647000DFE60AF110010491B9F1020F18D00846C5 +:106480005FF0000104F18C03CDE9000304F5AE7266 +:1064900002920EAB5A462046FEF704FE0028E7D1D2 +:1064A000B9F1020F08D0504608D14FF0010107E0C2 +:1064B00050464FF00101E5E70498F5E74FF0000181 +:1064C00004F1A403CDE9000304F5B072029281F057 +:1064D00001010FAB5A462046FEF7E4FD0028C7D164 +:1064E0006078800734D4A87898F80210C0F3800050 +:1064F000C1F3800108432BD0297898F800000BAA3B +:10650000B9F1020F06D032F811204300DA4002F050 +:1065100003070AE032F810204B00DA4012F00307BC +:1065200005D0012F0BD0022F0BD0032F07D0BBF1CA +:10653000000F0DD0012906D0042904D008E002275D +:10654000F5E70127F3E7012801D0042800D104274B +:10655000B07F40F08000B077F17F6BF30001F177FE +:10656000607881074FF003000CD5A071BBF1000FDC +:1065700015D100BF8DF85C0017AA3146199800F0BC +:10658000BFFA0CE00221022F18D0012F18D0042FDF +:1065900022D00020A071B07F20F08000B0772521AC +:1065A0003046FCF7B7FD10A904F1E0000BF0D7FE70 +:1065B00010B1022800D0FFDF00203AE6A171D9E730 +:1065C000A1710D2104F120001DF093FE207840F010 +:1065D000020020700420CDE70120A071DFE72DE943 +:1065E000F04387B09046894604460025FCF733FF08 +:1065F000060006D03078272806D0082007B0BDE86E +:10660000F08343F20200F9E7B07F00F003000228B4 +:1066100008D0002080F0010120460AF0C9F90400EA +:1066200003D101E00120F5E7FFDFA7795FEA090068 +:1066300005D0012821D0B9F1020F26D110E0B8F120 +:10664000000F22D1012F05D0022F05D0032F05D036 +:10665000FFDF2DE00C252BE0012529E0022527E0B6 +:1066600040460DF05BFEB0B9032F0ED1102241461B +:1066700004F11D001DF09CFD1AE0012F02D0022F35 +:1066800003D104E0B8F1000F12D00720B6E740466E +:106690000DF044FE08B11020B0E7102104F11D00F8 +:1066A0001DF005FE0621404607F080FCC4F81D00E1 +:1066B0002078252140F0020020703046FCF72AFDAA +:1066C0002078C10713D020F00100207002208DF83F +:1066D000000004F11D0002908DF804506946C3309B +:1066E0000BF03DFE022803D010B1FFDF00E025775C +:1066F000002083E730B587B00D460446FCF7ABFEBB +:10670000A0B1807F00F00300022812D05FF00000EB +:1067100080F0010120460AF04BF904000ED0284613 +:106720000DF0FCFD38B1102007B030BD43F202007F +:10673000FAE70120ECE72078400701D40820F3E7CE +:10674000294604F13D00202205461DF031FD207848 +:1067500040F01000207001070FD520F008002070D5 +:1067600007208DF80000694604F1E00001950BF068 +:10677000F6FD022801D000B1FFDF0020D4E770B59C +:106780000D460646FCF767FE18B10178272921D18E +:1067900002E043F2020070BD807F00F00300022897 +:1067A00008D0002080F0010130460AF001F9040011 +:1067B00003D101E00120F5E7FFDFA079022809D12C +:1067C0006078C00706D02A4621463046FEF7FAFC1C +:1067D00010B10FE0082070BDB4F860000E280BD295 +:1067E00004F1620102231022081F09F068FF012151 +:1067F00001704570002070BD112070BD70B5064657 +:1068000014460D4608460DF089FD18B920460DF0D6 +:10681000ABFD08B1102070BDA6F57F40FF380ED04B +:106820003046FCF718FE38B1417822464B08811CEF +:106830001846FCF7DFFD07E043F2020070BD20467A +:10684000FDF73EFE0028F9D11021E01D0DF041FAC0 +:10685000E21D294604F1170000F089F9002070BDFF +:106860002DE9F04104468AB01546884600270846BF +:106870000DF0A1FD18B928460DF09DFD18B11020AE +:106880000AB0BDE8F0812046FCF7E5FD060003D024 +:10689000307827281BD102E043F20200F0E7B07FF6 +:1068A00000F00300022809D05FF0000080F0010131 +:1068B00020460AF07DF8040003D101E00120F5E74D +:1068C000FFDF2078400702D56078800701D40820D8 +:1068D000D6E7B07F00F00300022803D0A06F03D1F9 +:1068E000A16F02E0606FFAE7616F407800B19DB17F +:1068F000487810B1B8F1000F0ED0ADB1EA1D06A86E +:10690000E16800F034F9102206A905F117001DF026 +:1069100023FC18B1042707E00720B1E71022E91D86 +:1069200004F12D001DF044FCB8F1000F06D0102238 +:1069300008F1070104F11D001DF03AFC2078252123 +:1069400040F0020020703046FCF7E4FB2078C107DD +:1069500015D020F00100207002208DF8000004F115 +:106960001D000290103003908DF804706946B3301A +:106970000BF0F5FC022803D010B1FFDF00E0277711 +:1069800000207DE7F8B515460E460746FCF763FD87 +:10699000040004D02078222804D00820F8BD43F257 +:1069A0000200F8BDA07F00F00300022802D043F2ED +:1069B0000500F8BD30460DF0B1FC18B928460DF0C1 +:1069C000ADFC08B11020F8BD00953288B31C2146FB +:1069D0003846FEF71AFC112815D00028F3D1297C7F +:1069E0004A08A17F62F3C711A177297CE27F61F396 +:1069F0000002E277297C890884F82010A17F21F029 +:106A00004001A177F8BDA17F0907FBD4D6F80200A9 +:106A1000C4F83600D6F80600C4F83A003088A086DC +:106A20001022294604F124001DF0C2FB287C4108F5 +:106A3000E07F61F34100E077297C61F38200E07739 +:106A4000287C800884F82100A07F40F00800A0770F +:106A50000020D3E770B50D4606460BB1072070BD88 +:106A6000FCF7F9FC040007D02078222802D3A07F8D +:106A7000800604D4082070BD43F2020070BDADB1A1 +:106A80002946304608F017FF02F0F0FA297C4A0840 +:106A9000A17F62F3C711A177297CE27F61F3000235 +:106AA000E277297C890884F8201004E0304608F059 +:106AB0002AFF02F0DBFAA17F21F02001A17770BD4F +:106AC00070B50D46FCF7C7FC040005D028460DF054 +:106AD0004BFC20B1102070BD43F2020070BD29466E +:106AE0002046FEF740FB002070BD04E010F8012BAB +:106AF0000AB100207047491E89B2F7D201207047C1 +:106B000070B51546064602F085FC040000D1FFDF93 +:106B1000207820F00F00801C20F0F0002030207042 +:106B200066802868A060BDE8704002F076BC10B5B1 +:106B3000134C94F83000002808D104F12001A1F191 +:106B400010000BF04EFC012084F8300010BD10B195 +:106B500090F8B9202AB10A4890F8350018B1002001 +:106B600003E0B83001E0064834300860704708B5EB +:106B70000023009313460A460AF015F908BD0000E9 +:106B80001802002018B18178012938D101E01020C5 +:106B90007047018842F60112881A914231D018DC00 +:106BA00042F60102A1EB020091422AD00CDC41B373 +:106BB000B1F5C05F25D06FF4C050081821D0A0F502 +:106BC0007060FF381BD11CE001281AD002280AD1BE +:106BD00017E0B0F5807F14D008DC012811D002281E +:106BE0000FD003280DD0FF2809D10AE0B0F5817F2E +:106BF00007D0A0F58070033803D0012801D0002011 +:106C000070470F2070470A281ED007DC18D2DFE833 +:106C100000F0191B1F1F171F231D1F21102815D03F +:106C200008DC0B2812D00C2810D00D2816D00F2805 +:106C300006D10DE011280BD084280BD087280FD067 +:106C400003207047002070470520704707207047D9 +:106C50000F20704704207047062070470C207047B3 +:106C600043F20200704738B50C46050041D0694632 +:106C7000FFF7A8F9002819D19DF80010607861F39A +:106C8000020060706946681CFFF79CF900280DD16E +:106C90009DF80010607861F3C5006070A978C1F3B9 +:106CA0004101012903D0022905D0072038BD2178F0 +:106CB00021F0200102E0217841F0200121704107FC +:106CC00004D0A978C90861F386106070607810F06C +:106CD000380F07D0A978090961F3C710607010F068 +:106CE000380F02D16078400603D5207840F040008C +:106CF0002070002038BD70B504460020088015467D +:106D00006068FFF7B0FF002816D12089A18988426A +:106D100011D860688078C0070AD0B1F5007F0AD822 +:106D200040F20120B1FBF0F200FB1210288007E0D6 +:106D3000B1F5FF7F01D90C2070BD01F2012129803E +:106D4000002070BD10B50478137864F3000313704D +:106D50000478640864F3410313700478A40864F3AE +:106D6000820313700478E40864F3C3031370047897 +:106D7000240964F3041313700478640964F345135D +:106D800013700078800960F38613137031B10878AE +:106D9000C10701D1800701D5012000E0002060F388 +:106DA000C713137010BD4278530702D002F00703D7 +:106DB00006E012F0380F02D0C2F3C20300E0012354 +:106DC0004A7863F302024A70407810F0380F02D01C +:106DD000C0F3C20005E0430702D000F0070000E066 +:106DE000012060F3C5024A7070472DE9F04F95B05D +:106DF0000D00824612D0122128461DF058FA4FF697 +:106E0000FF7B05AA0121584606F01BFF00242646F9 +:106E100037464FF420586FF4205972E0102015B017 +:106E2000BDE8F08F9DF81E0001280AD1BDF81C10A6 +:106E300041450BD011EB09000AD001280CD00228E3 +:106E40000CD0042C0ED0052C0FD10DE0012400E055 +:106E50000224BDF81A6008E0032406E00424BDF80B +:106E60001A7002E0052400E00624BDF81A1051450E +:106E700047D12C74BEB34FF0000810AA4FF0070A98 +:106E8000CDE90282CDE900A80DF13C091023CDF82F +:106E9000109042463146584606F086FF08BBBDF8C2 +:106EA0003C002A46C0B210A90BF004FBC8B9AE8161 +:106EB000CFB1CDE900A80DF1080C0AAE40468CE830 +:106EC0004102132300223946584606F06DFF40B9AF +:106ED000BDF83C00F11CC01EC0B22A1D0BF0EAFA3E +:106EE00010B103209BE70AE0BDF82900E881062CD9 +:106EF00005D19DF81E00A872BDF81C002881002055 +:106F00008DE705A806F0A9FE00288BD0FFF77BFED1 +:106F100085E72DE9F0471C46DDE90978DDF820908A +:106F200015460E00824600D1FFDF0CB1208818B153 +:106F3000D5B11120BDE8F087022D01D0012100E07C +:106F4000002106F1140005F06BFDA8F800000246D0 +:106F50003B462946504603F0BCF8C9F8000008B982 +:106F6000A41C3C600020E5E71320E3E7F0B41446DE +:106F7000DDE904528DB1002314B1022C09D101E0E6 +:106F8000012306E00D7CEE0703D025F00105012367 +:106F90000D742146F0BC03F025BF1A80F0BC704789 +:106FA0002DE9FE4F91461A881C468A468046FAB162 +:106FB00002AB494603F08DF8050019D04046A61CE7 +:106FC000278809F039FE3246072629463B460096B7 +:106FD00009F047FA20882346CDE900504A46514639 +:106FE0004046FFF7C3FF002020800120BDE8FE8F50 +:106FF0000020FBE72DE9F04786B09146DDE90E461B +:107000000F46824603AA05A904A8109D8DE8070033 +:107010009846324621465046FFF77BFF049909B156 +:10702000012200E000222A70002818D1F94A03AB9F +:107030001060059A009104F11400CDE901204A4640 +:107040003946504606F0A3F8A8B1092811D2DFE866 +:1070500000F005080510100A0C0C0E00002006B008 +:1070600068E71120FBE70720F9E70820F7E70D2084 +:10707000F5E70320F3E7BDF80C100498CDE9000113 +:107080004346324621465046FFF770FFE6E72DE9BA +:10709000F04389B00D46DDE9108781461C4616464F +:1070A000142103A81DF025F9012002218DF81010EC +:1070B0008DF80C008DF81170ADF8146064B1A278F1 +:1070C000D20709D08DF81600E088ADF81A00A08824 +:1070D000ADF81800A068079008A80095CDE9011048 +:1070E000424603A948466B68FFF784FF09B0BDE834 +:1070F000F083F0B58BB0002406460694079407276A +:10710000089405A80994019400970294CDE90340DE +:107110000D4610232246304606F046FE78B90AA8EE +:1071200006A9019400970294CDE90310BDF814302C +:1071300000222946304606F00DFC002801D0FFF75A +:1071400062FD0BB0F0BD06F0ADBA2DE9FC410C4676 +:107150008046002602F05EF9054620780D287DD293 +:10716000DFE800F0BC0713B325BD49496383AF9541 +:107170009B00A848006820B1417841F0100141709F +:10718000ADE0404602F076F9A9E00421404609F05E +:107190000FFC070000D1FFDF07F11401404605F0A6 +:1071A000D3FBA5BB13214046FDF748FC97E0042123 +:1071B000404609F0FDFB070000D1FFDFE088ADF895 +:1071C00000000020B8819DF80000010704D5C0062A +:1071D00002D5A088B88105E09DF8010040067ED563 +:1071E000A088F88105B9FFDF22462946404601F014 +:1071F00063FC022673E0E188ADF800109DF80110F1 +:1072000009060FD5072803D006280AD00AE024E093 +:107210000421404609F0CCFB060000D1FFDFA08826 +:10722000F0810226CDB9FFDF17E00421404609F0C6 +:10723000BFFB070000D1FFDF07F1140006F069FA79 +:1072400090F0010F02D1E079000648D5387C022683 +:1072500040F00200387405B9FFDF00E03EE022464E +:107260002946404601F028FC39E00421404609F057 +:107270009FFB017C002D01F00206C1F3400161710A +:10728000017C21F002010174E7D1FFDFE5E702266E +:107290000121404602F020F921E00421404609F096 +:1072A00087FB0546606800902089ADF80400012244 +:1072B0006946404602F031F9287C20F0020028742B +:1072C0000DE0002DC9D1FFDFC7E7022600214046AF +:1072D000FBF788F8002DC0D1FFDFBEE7FFDF3046A7 +:1072E000BDE8FC813EB50C0009D001466B4601AA01 +:1072F000002006F0DBFD20B1FFF785FC3EBD10202D +:107300003EBD00202080A0709DF8050002A900F07D +:107310000700FEF773FE50B99DF8080020709DF835 +:10732000050002A9C0F3C200FEF768FE08B1032001 +:107330003EBD9DF8080060709DF80500C109A07869 +:1073400061F30410A0709DF80510890961F3C30072 +:10735000A0709DF80410890601D5022100E00121EA +:1073600061F342009DF8001061F30000A07000205E +:107370003EBD70B5144606460D4651EA040005D0E0 +:1073800075B108460DF00EF878B901E0072070BD20 +:107390002946304606F0EBFD10B1BDE8704032E4FE +:1073A00054B120460CF0FEFF08B1102070BD2146FC +:1073B0003046BDE8704095E7002070BD2DE9FC5FC8 +:1073C0000C4690460546002701780822007A3E4682 +:1073D000B2EB111F7ED104F10A0100910A31821E25 +:1073E0004FF0020A04F1080B0191092A73D2DFE879 +:1073F00002F0ECDF05F427277AA9CD006888042184 +:1074000009F0D6FA060000D1FFDFB08920B152277B +:107410000726C2E07C02002051271026002C7DD0D8 +:107420006888A0800120A071A88900220099FFF738 +:10743000A0FF002873D1A8892081288AE081D1E0AB +:10744000B5F81290072824D1E87B000621D55127F2 +:1074500009F1140086B2002CE1D0A889002200991D +:10746000FFF787FF00285AD16888A08084F806A01B +:10747000A88920810120A073288A2082A4F8129074 +:10748000A88A009068884B46A969019A01F0F1FA30 +:10749000A8E0502709F1120086B2002C3ED0A8893E +:1074A00000225946FFF765FF002838D16888A08080 +:1074B000A889E080287A072813D002202073288A20 +:1074C000E081E87BC0096073A4F81090A88A00905E +:1074D000688801E083E080E04B4604F11202A9696C +:1074E000D4E70120EAE7B5F81290512709F114001A +:1074F00086B2002C66D06888042109F059FA8346C8 +:107500006888A080A88900220099FFF732FF002830 +:107510006ED184F806A0A889208101E052E067E0DE +:107520000420A073288A2082A4F81290A88A0090D0 +:1075300068884B46A969019A01F09BFAA989ABF8C2 +:107540000E104FE06888FBF786FF07466888042125 +:1075500009F02EFA064607B9FFDF06B9FFDF687BA0 +:10756000C00702D05127142601E0502712264CB341 +:107570006888A080502F06D084F806A0287B594642 +:1075800001F087FA2EE0287BA11DF9E7FE49A889C2 +:107590004989814205D1542706269CB16888A0807C +:1075A00020E053270BE06888A080A889E08019E0DC +:1075B0006888042109F0FCF900B9FFDF5527082687 +:1075C000002CF0D1A8F8006011E056270726002C07 +:1075D000F8D06888A080002013E0FFDF02E00128D7 +:1075E00008D0FFDFA8F800600CB12780668000207B +:1075F000BDE8FC9F57270726002CE3D06888A080B1 +:10760000687AA071EEE7401D20F0030009B1414304 +:10761000091D01EB4000704713B5DB4A00201071D3 +:10762000009848B10024684608F0DFFF002C02D122 +:10763000D64A009911601CBD01240020F4E770B502 +:107640000D46064686B014465C2128461CF051FEC5 +:1076500004B9FFDFA0786874A2782188284601F079 +:1076600042FA0020A881E881228805F11401304601 +:1076700005F04FF96A460121304606F0E2FA19E0BA +:107680009DF80300000715D5BDF806103046FFF73A +:1076900030FD9DF80300BDF8061040F010008DF895 +:1076A0000300BDF80300ADF81400FF233046059A2F +:1076B00006F028FC684606F0D0FA0028E0D006B0B4 +:1076C00070BD10B50C4601F1140005F059F90146E2 +:1076D000627C2046BDE8104001F03ABA70B505461C +:1076E000042109F065F9040000D1FFDF04F1140161 +:1076F0000C46284605F028F921462846BDE870408A +:1077000005F029B970B58AB00C460646FBF7A3FE12 +:10771000050014D02878222827D30CB1A08890B176 +:1077200001208DF80C0003208DF8100000208DF84A +:10773000110054B1A088ADF81800206807E043F2AA +:1077400002000AB070BD0920FBE7ADF818000590F3 +:107750000421304609F02CF9040000D1FFDF04F1C8 +:10776000140005F024F9000701D40820E9E701F02E +:1077700051FE60B108A802210094CDE9011095F8EE +:10778000232003A930466368FFF734FCD9E71120B2 +:10779000D7E72DE9F04FB2F802A0834689B015462D +:1077A00089465046FBF757FE07460421504609F02C +:1077B000FFF80026044605964FF002080696ADF83D +:1077C0001C6007B9FFDF04B9FFDF4146504603F0F4 +:1077D00070FE50B907AA06A905A88DE80700424621 +:1077E000214650466368FFF794FB674807AB066085 +:1077F000DDE9051204F11400CDF80090CDE9032075 +:10780000CDE9013197F82320594650466B6805F0C1 +:1078100017F906000AD0022E04D0032E14D0042E2D +:1078200000D0FFDF09B03046BDE8F08FBDF81C0086 +:107830000028F7D00599CDE9001042462146504670 +:107840006368FFF793FBEDE7687840F00800687025 +:10785000E8E72DE9F04F9BB004464FF000084A4896 +:10786000ADF85480ADF83080ADF85080A0F80880B5 +:10787000ADF81480ADF81880ADF82080ADF81C800C +:10788000007916460D464746012808D0022806D042 +:10789000032804D0042802D008201BB0C4E72046E7 +:1078A0000CF03CFDD0BB28460CF038FDB0BB606846 +:1078B0000CF081FD90BB606848B1608921898842E5 +:1078C00002D8B1F5007F01D90C20E6E780460BAA6B +:1078D00006A92846FFF70FFA0028DED168688078ED +:1078E000C0F34100022808D19DF8190010F0380FAC +:1078F00003D028690CF056FD80B905A92069FFF76F +:10790000B2F90028C9D1206950B1607880079DF88C +:10791000150000F0380002D5D0B301E011E0B8BB8B +:107920009DF8140080060ED59DF8150010F0380F54 +:1079300003D060680CF036FD18B960680CF03BFDB0 +:1079400008B11020A9E707A96069FFF78CF90028A2 +:10795000A3D1606940B19DF81D0000F00701012925 +:107960003FD110F0380F3CD008A9A069FFF77BF990 +:10797000002892D19DF81C00800632D49DF820008A +:1079800080062ED4A06904E07C02002014000020B0 +:1079900027E040B19DF8210000F00701012920D126 +:1079A00010F0380F1DD0E06818B10078C8B11C285D +:1079B00017D20EAA611C2046FFF7C4F90120B94670 +:1079C00060F30F27BA4607468DF84E0042F60300D3 +:1079D000ADF84C000DF13B0217A928680AF089FDAB +:1079E00008B1072059E79DF85C0016A9CDF8009072 +:1079F000C01CCDE9019100F0FF0B00230BF2012226 +:107A0000514613A806F060F8F0BBBDF85800099085 +:107A1000FE482A8929690092CDE901106B89BDF8D9 +:107A20002C202868069906F04FF801007ED12078B6 +:107A30004FF0020AC10601D480062BD5ADF80C9098 +:107A4000606950B907A906A8FFF7ADF99DF81D00B8 +:107A500020F00700401C8DF81D009DF81C008DF8DB +:107A60004E7040F0C8008DF81C0042F60210ADF8D0 +:107A70004C000CA903AACDF800A0CDE901210023F8 +:107A800040F2032213A800E01EE0079906F01CF85C +:107A900001004BD1DD484D4608385B460089ADF802 +:107AA00039000EA8CDE90290CDF80490CDF81090E1 +:107AB0004FF007090022CDF80090BDF858104FF69E +:107AC000FF7005F047FF10B1FFF79DF8E5E69DF860 +:107AD0003800000625D52946012060F30F218DF8D6 +:107AE0004E704FF42450ADF84C00ADF81050627851 +:107AF0009DF81000002362F300008DF810006278FA +:107B0000CDF800A0520862F341008DF8100004AADD +:107B1000CDE9012540F2032213A805F0D5FF0100AD +:107B200004D1606888B32069A8B900E086E005A99F +:107B300006A8FFF738F96078800706D49DF815008D +:107B400020F038008DF8150005E09DF8140040F095 +:107B500040008DF814008DF84E7042F60110ADF81B +:107B60004C00208940F20121B0FBF1F201FB12022E +:107B7000606814ABCDF80080CDE90103002313A8A1 +:107B8000059905F0A1FF010058D12078C00729D040 +:107B9000ADF80C50A06950B908A906A8FFF703F981 +:107BA0009DF8210020F00700401C8DF821009DF871 +:107BB00020008DF84E7040F040008DF8200042F615 +:107BC0000310ADF84C0015A903AACDF800A0CDE92B +:107BD0000121002340F2032213A8089905F074FF45 +:107BE00001002BD1E06868B32946012060F30F2122 +:107BF0008DF84E7042F60410ADF84C00E06800239A +:107C000002788DF8602040788DF86100E06818AA4D +:107C10004088ADF86200E06800798DF86400E068A3 +:107C2000C088ADF86500CDF80090CDE901254FF48E +:107C3000027213A805F048FF010003D0099800F074 +:107C4000B3FF2AE6714803210838017156B1008953 +:107C50003080BDF850007080BDF83000B080BDF8B5 +:107C60005400F080002018E670B501258AB0164651 +:107C70000B46012802D0022816D104E08DF80E50E0 +:107C80004FF4205003E08DF80E5042F60100ADF89D +:107C90000C005BB10024601C60F30F2404AA08A947 +:107CA00018460AF026FC18B107204AE5102048E5DE +:107CB00004A99DF820205548CDE90021801E02909E +:107CC0000023214603A802F2012205F0FDFE10B1B7 +:107CD000FEF799FF35E54D4808380EB1C18831806F +:107CE000057100202DE5F0B593B0074601268DF80B +:107CF0003E6041F60100ADF83C0012AA0FA93046E3 +:107D0000FFF7B2FF002848D1404C0025083CE7B3FC +:107D10001C2102A81CF0EDFA9DF808008DF83E60C9 +:107D200040F020008DF8080042F60520ADF83C0038 +:107D30000E959DF83A00119520F00600801C8DF8F4 +:107D40003A009DF838006A4620F0FF008DF83800B0 +:107D50009DF8390009A920F0FF008DF839000420B2 +:107D6000ADF82C00ADF830000EA80A9011A80D90C7 +:107D70000FA80990ADF82E5002A8FFF76AFD002861 +:107D80000BD1BDF80000608100E008E0BDF8040000 +:107D9000A081401CE0812571002013B0F0BD6581F9 +:107DA000A581BDF84800F4E72DE9F74F1749A0B0C9 +:107DB0000024083917940A79A146012A04D0022A1E +:107DC00002D0082023B02FE5CA88824201D00620C5 +:107DD000F8E721988A46824201D10720F2E7012084 +:107DE0002146ADF848004FF6FF7860F30F21ADF85B +:107DF0004A808DF86E0042F6020B06918DF87240B3 +:107E0000ADF86CB0ADF870401CA901E08402002010 +:107E10001391ADF8508012A805F043FF00252E46BF +:107E20002F460DAB072212A9404605F03DFF78B161 +:107E30000A285DD195B38EB3ADF86450ADF8666095 +:107E40009DF85E008DF8144019AC012864D06BE0F9 +:107E50009DF83A001FB3012859D1BDF83810594593 +:107E60001FD118A809A901940294CDE90310072095 +:107E70000090BDF8361010230022404605F094FF14 +:107E8000B0BBBDF86000042801D006284AD1BDF877 +:107E90002410219881423AD10F2093E73AE001283B +:107EA00035D1BDF83800B0F5205F03D042F60101AE +:107EB00088422CD1BAF80600BDF83610884201D1AC +:107EC000012700E0002705B19EB1219881421ED113 +:107ED00018A809AA01940294CDE903200720009074 +:107EE0000D4610230022404605F05EFF00B902E077 +:107EF0002DE04E460BE0BDF86000022801D01028AE +:107F000010D1C0B217AA09A90AF0D4FA50B9BDF825 +:107F1000369086E7052055E705A917A8221D0AF027 +:107F2000E8FA08B103204DE79DF814000023001D76 +:107F3000C2B28DF8142022980092CDE901401BA80E +:107F4000069905F0C1FD10B902228AF80420FEF757 +:107F50005AFE37E710B50B46401E88B084B205AA1A +:107F600000211846FEF7EEFE00200DF1080C06AACF +:107F700005A901908CE8070007200090012300224A +:107F800021464FF6FF7005F0E5FC0446BDF81800E9 +:107F9000012800D0FFDF2046FEF735FE08B010BDF7 +:107FA000F0B5FF4F044687B038790E46032804D059 +:107FB000042802D0082007B0F0BD04AA03A9204677 +:107FC000FEF799FE0500F6D160688078C0F34100A5 +:107FD00002280AD19DF80D0010F0380F05D0206955 +:107FE0000CF0E0F908B11020E5E7208905AA216925 +:107FF0008DE807006389BDF810202068039905F01B +:1080000063FD10B1FEF7FFFDD5E716B1BDF8140012 +:108010003080042038712846CDE7F8B50C000646BC +:108020000BD001464FF6FF7500236A46284605F03F +:108030003DFF20B1FEF7E7FDF8BD1020F8BD694611 +:108040002046FEF710FE0028F8D1A078314600F057 +:1080500001032846009A05F055FFEBE730B587B0DD +:10806000144600220DF1080C05AD01928CE82C009D +:10807000072200920A46014623884FF6FF7005F05A +:1080800069FCBDF814102180FEF7BDFD07B030BDBE +:1080900070B50D46042108F08BFC040000D1FFDF11 +:1080A000294604F11400BDE8704004F079BC70B5B5 +:1080B0000D46042108F07CFC040000D1FFDF2946B6 +:1080C00004F11400BDE8704004F08DBC70B50D469D +:1080D000042108F06DFC040000D1FFDF294604F103 +:1080E0001400BDE8704004F0A5BC70B5054604213D +:1080F00008F05EFC040000D1FFDF2146284623681B +:10810000BDE870400122FEF74BBF70B50646042162 +:1081100008F04EFC040000D1FFDF04F1140004F06D +:108120002FFC401D20F0030511E0011D00880022F6 +:10813000431821463046FEF733FF00280BD0607C01 +:10814000ABB2684382B2A068011D08F0EEFAA068E5 +:1081500041880029E9D170BD70B50546042108F0B9 +:1081600027FC040000D1FFDF214628466368BDE8F4 +:1081700070400222FEF714BF70B50E46054601F0AE +:1081800049F9040000D1FFDF01202072667265808A +:10819000207820F00F00001D20F0F000403020700B +:1081A000BDE8704001F039B910B50446012900D08E +:1081B000FFDF2046BDE810400121FAF713B92DE991 +:1081C000F04F97B04FF0000A0C008346ADF814A0B2 +:1081D000D04619D0E06830B1A068A8B10188ADF8E8 +:1081E0001410A0F800A05846FBF735F9070043F239 +:1081F000020961D0387822285CD30421584608F05F +:10820000D7FB050005D103E0102017B0BDE8F08FC3 +:10821000FFDF05F1140004F0B3FB401D20F003065E +:10822000A078012803D0022801D00720EDE721889B +:1082300007AA584605F005FD30BB07A805F00DFD5F +:1082400010BB07A805F009FD48B99DF826000128D4 +:1082500005D1BDF82400A0F52451023902D04FF415 +:108260005050D2E7E068B0B1CDE902A007200090FD +:1082700005AACDF804A00492A2882188BDF8143084 +:10828000584605F067FB10B1FEF7BDFCBDE7A168DD +:10829000BDF8140008809DF81F00C00602D543F207 +:1082A0000140B2E70B9838B1A1780078012905D0D8 +:1082B00080071AD40820A8E74846A6E7C007F9D0E7 +:1082C00002208DF83C00A8684FF00009A0B1697C3D +:1082D0004288714391420FD98AB2B3B2011D08F0AE +:1082E000DAF98046A0F800A006E003208DF83C00F3 +:1082F000D5F800804FF001099DF8200010F0380FEC +:1083000000D1FFDF9DF820002649C0F3C2000844D9 +:1083100097F8231010F8010C884201D90F2074E758 +:108320002088ADF8400014A90095CDE9019143469D +:1083300007220FA95846FEF75DFE002891D19DF84F +:10834000500050B9A078012807D1687CB3B27043BF +:1083500082B2A868011D08F0B2F9002055E770B597 +:10836000064615460C460846FEF70CFC002805D1CB +:108370002A4621463046BDE8704075E470BD13E5DD +:1083800070B51E4614460D000ED06CB1616859B12F +:1083900060B10349C988814208D0072070BD000040 +:1083A0007C020020FA2F00001020F7E72068FEF77B +:1083B000E9FB0028F2D1324621462846BDE870404C +:1083C000FFF747BA70B515460C0006D038B1FE4924 +:1083D0000989814203D00720E0E71020DEE720680A +:1083E000FEF7D0FB0028D9D129462046BDE87040D1 +:1083F000D6E570B5064686B00D46144610460BF01D +:10840000B3FFD0BB60680BF0D6FFB0BBA6F57F40D2 +:10841000FF3803D03046FBF71EF880B12846694686 +:10842000FEF7E3FC00280CD19DF810100F2008295E +:108430003CD2DFE801F008060606060A0A0843F205 +:10844000020006B0AAE70320FBE79DF8021001290D +:1084500008D1BDF80010B1F5C05FF2D06FF4C05282 +:10846000D142EED09DF8061001290DD1BDF80410BF +:10847000A1F52851062907D200E028E0DFE801F045 +:10848000030304030303DCE79DF80A1001290ED15E +:10849000BDF80810B1F5245FD3D0A1F524510239FD +:1084A000CFD00129CDD0022901D1CAE7FFDF606812 +:1084B00078B9002305AA2946304605F0F7FC10B12B +:1084C000FEF7A1FBBDE79DF81400800601D4102043 +:1084D000B7E76188224628466368FFF7BFFDB0E72B +:1084E0002DE9F043814687B08846144610460BF0CC +:1084F0003BFF18B1102007B0BDE8F083002306AAA7 +:108500004146484605F0D2FC18B100BFFEF77BFBA0 +:10851000F1E79DF81800C00602D543F20140EAE7F2 +:108520000025072705A8019500970295CDE903507E +:1085300062884FF6FF734146484605F035FC060059 +:1085400013D160680BF010FF60B960680195CDE948 +:10855000025000970495238862884146484605F0FA +:1085600023FC0646BDF8140020803046CEE739B122 +:10857000954B0A889B899A4202D843F203007047C0 +:108580001DE610B586B0904C0423ADF81430638915 +:1085900043B1A4898C4201D2914205D943F2030030 +:1085A00006B010BD0620FBE7ADF8101000210091C9 +:1085B0000191ADF8003002218DF8021005A9029159 +:1085C00004A90391ADF812206946FFF7F8FDE7E72B +:1085D0002DE9FC4781460E4608460BF09FFE88BBFE +:1085E0004846FAF738FF5FEA00080AD098F800001A +:1085F000222829D30421484608F0DAF9070005D1DA +:1086000003E043F20200BDE8FC87FFDF07F114003E +:1086100004F0CDF905463078012803D0022804D0B3 +:108620000720F0E7A8070FD502E015F01C0F0BD0CC +:10863000B079341DC00709D0E08838B1A0680BF0CC +:108640006DFE18B11020DEE70820DCE732782088C4 +:10865000002628B3A0F201130721112B18D20CD247 +:10866000DFE803F00B090D0B1D0B121D100B0B1D8A +:108670001D1D1D0B1D00022A11D10846C3E7012A4A +:10868000FBD00CE02A0700E0EA06002AF5DA06E053 +:10869000A0F5C0721F2A02D97D3A022AEDD8C6B2CF +:1086A00000F0B8FE50B198F82300CDE90006FA8931 +:1086B000234639464846FEF7EAFCA4E71120A2E724 +:1086C0002DE9F04F8BB01F4615460C468346002619 +:1086D000FAF7C1FE28B10078222805D208200BB095 +:1086E00094E543F20200FAE7B80801D00720F6E764 +:1086F000032F00D100274FF6FF79CCB1022D73D3A1 +:1087000020460BF058FE30B904EB0508A8F1010033 +:108710000BF051FE08B11020E1E7AD1EAAB22146D0 +:10872000484605F06DFC38F8021C88425CD1ADB2B9 +:108730002549B80702D58889401C00E001201FFAAE +:1087400080F8F80701D08F8900E04F4605AA41461E +:10875000584605F076FA4FF0070A4FF00009ACB31F +:10876000204608E0408810283ED8361D304486B2A6 +:10877000AE4239D2A01902884245F3D354E000BF7B +:108780009DF8170002074FD584B304EB0608361D89 +:10879000B8F80230B6B2102B26D89A19AA4223D8BC +:1087A000B8F8002091421FD1C00620D5CDE900A91C +:1087B0000DF1080C0AAAA11948468CE80700B8F880 +:1087C00000100022584603E07C0200202CE00BE061 +:1087D00005F0C0F810B1FEF716FA80E7B8F802000D +:1087E000BDF82810884202D00B2078E704E0B8F8E2 +:1087F0000200304486B206E0C00604D55846FEF7B3 +:1088000078FC002888D19DF81700BDF81A1020F0D8 +:1088100010008DF81700BDF81700ADF80000FF2319 +:108820005846009A05F06EFB05A805F016FA18B92F +:10883000BDF81A10B942A3D90421584608F0B8F877 +:10884000040000D1FFDFA2895AB1CDE900A94D464D +:10885000002321465846FEF71AFC0028BDD1A58109 +:108860003DE700203BE72DE9FF4F8BB01E46170088 +:108870000D464FF0000412D0B00802D007200FB010 +:10888000C4E4032E00D100265DB108460BF08AFD3A +:1088900028B93888691E08440BF084FD08B11020FF +:1088A000EDE7C74AB00701D5D18900E00121F00703 +:1088B0004FF6FF7802D0D089401E00E0404686B2D5 +:1088C00006AA0B9805F0BDF94FF000094FF0070B11 +:1088D0000DF1140A39E000BF9DF81B00000734D5E4 +:1088E000CDF80490CDF800B0CDF80890CDE9039A0A +:1088F000434600220B9805F057FA60BB05B3BDF85C +:1089000014103A8821442819091D8A4230D3BDF831 +:108910001E2020F8022BBDF8142020F8022BCDE9F0 +:1089200000B9CDE90290CDF810A0BDF81E10BDF839 +:10893000143000220B9805F037FA08B103209EE7A7 +:10894000BDF814002044001D84B206A805F085F986 +:1089500020B10A2806D0FEF756F990E7BDF81E10A0 +:10896000B142B9D934B17DB13888A11C884203D253 +:108970000C2084E7052082E722462946404605F080 +:108980003FFB014628190180A41C3C80002076E7AB +:1089900010B504460BF0E8FC08B1102010BD884863 +:1089A000C0892080002010BDF0B58BB00D46064672 +:1089B000142103A81BF09DFC01208DF80C008DF8FC +:1089C000100000208DF81100ADF814503046FAF771 +:1089D00042FD48B10078222812D30421304607F026 +:1089E000E7FF040005D103E043F202000BB0F0BD45 +:1089F000FFDF04F11400074603F0D9FF800601D41D +:108A00000820F3E7207C022140F00100207409A82F +:108A10000094CDE90110072203A930466368FEF7F0 +:108A2000E9FA20B1217C21F001012174DEE7294619 +:108A30003046F9F7C8FC08A9384603F0A7FF00B193 +:108A4000FFDFBDF82040172C01D2172000E02046A0 +:108A5000A84201D92C4602E0172C00D21724214647 +:108A60003046FFF724FB21463046F9F7D2F90020C3 +:108A7000BCE7F8B51C4615460E46069F08F0CAF836 +:108A80002346FF1DBCB231462A46009407F0B5FCD0 +:108A9000F8BD70B50C4605460E2120461BF007FCBC +:108AA000002020802DB1012D01D0FFDF76E40620CB +:108AB00000E00520A07171E410B5488008781346E5 +:108AC00020F00F00001D20F0F00080300C460870F0 +:108AD0001422194604F108001BF0AFFB00F09DFCC6 +:108AE0003748046010BD2DE9F047DFF8D890491DE4 +:108AF000064621F0030117460C46D9F8000007F09E +:108B000092FD050000D1FFDF4FF000083560A5F8A9 +:108B100000802146D9F8000007F085FD050000D14E +:108B2000FFDF7560A5F800807FB104FB07F1091D28 +:108B30000BD0D9F8000007F076FD040000D1FFDF6C +:108B4000B460C4F80080BDE8F087C6F80880FAE792 +:108B50002DE9F0411746491D21F00302194D064643 +:108B600001681446286807F089FD22467168286864 +:108B700007F084FD3FB104FB07F2121D03D0B1687A +:108B8000286807F07BFD042007F0BAFE04460420A5 +:108B900007F0BEFE201A012804D12868BDE8F04184 +:108BA00007F036BDBDE8F08110B50C4605F015F8AC +:108BB00000B1FFDF2046BDE81040FEF724B80000FA +:108BC0007C0200201400002038B50C468288817B8E +:108BD00019B14189914200D90A462280C188121DEB +:108BE00090B26A4606F092FFBDF80000032800D359 +:108BF0000320C1B2208800F0A3FF38BD38B50C4671 +:108C00008288817B19B10189914200D90A4622806C +:108C1000C188121D90B26A4606F078FFBDF80000C8 +:108C2000022800D30220C1B2208800F089FF401C36 +:108C3000C0B238BD2DE9FE4F0C46FD4981464022A9 +:108C4000D1E90201CDE9010109F1030020F003019E +:108C5000C91C21F0030100916846114607F0C5FCCC +:108C6000F44E002C02D1F44A00999160009901441D +:108C70000091357F05F1010504D1E8B209F0C0FB90 +:108C800000B1FFDF009800EB0510C01C20F00301CD +:108C900000915CB9707AB27A1044C2B200200870B8 +:108CA000308C80B204F021FE00B1FFDF0098316A01 +:108CB000084400902146684600F00DFF0098C01C53 +:108CC00020F003000090B37AF27A717A04B10020A8 +:108CD00007F081FD0099084400902146684600F0A5 +:108CE0003AFF00273D46B24696F801800CE0284640 +:108CF00000F0D4FE064681788088F9F721F9717872 +:108D00006D1C00FB0177EDB24545F0D10098C01C09 +:108D100020F00300009004B100203946F9F71BF958 +:108D200000990027084400903D469AF801800CE025 +:108D3000284600F0B3FE0646C1788088FEF763FC43 +:108D400071786D1C00FB0177EDB24545F0D10098BC +:108D5000C01C20F00300009004B100203946FEF74B +:108D60005BFC00994FF000080844009045469AF8D3 +:108D700001700EE0284600F091FE0646807B30B17F +:108D800006F1080001F0DDFE727800FB02886D1C20 +:108D9000EDB2BD42EED10098C01C20F0030000905F +:108DA00004B10020414601F0D0FE00990844009033 +:108DB0002146684600F049FE0098C01D20F00702D9 +:108DC00000922CBB9D490020FAF747F8FBF715FBF2 +:108DD000984801AA00211030F8F7CEFA00B1FFDF61 +:108DE0009AF81D00FEF77FFF00B1FFDF91484FF4B6 +:108DF000F67144301BF07DFA8E480421443080F82F +:108E0000E91180F8EA11062180F8EB1103210171C4 +:108E10000099A1EB0900BDE8FE8F70B5854C0646B0 +:108E20004434207804EB4015E078083590B9A01957 +:108E300090F8E80100280ED0A0780F2800D3FFDFBB +:108E4000202128461BF055FA687866F30200687006 +:108E50000120E070284670BD2DE9F04105460C4622 +:108E600000270078052190463E46B1EB101F00D048 +:108E7000FFDF287A50B101280ED0FFDFA8F800608C +:108E80000CB1278066800020BDE8F081012709260B +:108E900074B16888A08008E00227142644B168886D +:108EA000A0802869E060A88A2082287B2072E5E7FC +:108EB000A8F80060E7E710B55F4C6068C11D21F0BD +:108EC0000701814200D0FFDF5A48012100220170D2 +:108ED00042700172417203238372C1720273027481 +:108EE000052202831F224283417455A242610A2255 +:108EF000027741774FF4B06101626168416010BD53 +:108F000030B54D4C1568636810339D4202D2042081 +:108F1000136030BD474B5D785A6802EB0512107044 +:108F200051700320D080172090800120D070907065 +:108F3000002090735878401C587060681030606052 +:108F4000002030BD70B506463A480024457807E059 +:108F5000204600F0A3FD0178B14204D0641CE4B2C5 +:108F6000AC42F5D1002070BDF7B5074608780C4635 +:108F700010B3FFF7E7FF0546A7F12006202F06D024 +:108F8000052E19D2DFE806F00F2B2B151A0000F082 +:108F900090FD0DB1697800E00021401AA17880B2FF +:108FA0000844FF2808D8A07830B1A088022824D22D +:108FB00002E06088172820D20720FEBD207AE0B1A9 +:108FC00061881729F8D3A1881729F5D3A179002939 +:108FD000F2D0E1790029EFD0402804D9ECE7242F22 +:108FE0000BD1207A48B161884FF6FB70814202D8DC +:108FF000A188814201D90420FEBD65B9207802AA6A +:109000000121FFF77DFF0028F6D12078FFF79AFFB6 +:10901000050000D1FFDF052E25D2DFE806F003189A +:109020001B151E00A0786870A088E8801CE0000076 +:10903000B0460200980300201C0000200000002021 +:109040006E524635780000006088A8800CE0A07859 +:10905000A87009E0A078E87006E054F8020FA86054 +:109060006068E86000E0FFDF0020FEBD1A2835D010 +:109070000DDC132832D2DFE800F01B31203131271C +:109080002723252D313129313131312F0F0030285F +:1090900002D003DC1E2821D1072070473A38092866 +:1090A0001CD2DFE800F0151B0F1B1B1B1B1B07004E +:1090B0000020704743F20400704743F202007047FB +:1090C000042070470D2070470F207047082070471C +:1090D0001120704713207047062070470320704707 +:1090E00010B5007800F0010006F001FDBDE8104069 +:1090F000BCE70EB5017801F001018DF80010417850 +:1091000001F001018DF801100178C1F340018DF8E3 +:1091100002104178C1F340018DF8031001788908ED +:109120008DF80410417889088DF8051081788DF844 +:109130000610C1788DF8071000798DF80800684690 +:1091400005F0ACFAFFF792FF0EBD2DE9F84FDFF8FE +:10915000F883FE4C00261FE0012000F03FFD0120B7 +:10916000FFF75BFE054640214746D8F8080007F0A8 +:109170005AFA686000B9FFDF686805F03EF8A8B1E8 +:109180002846FAF75AFC284600F02EFD20B9402266 +:109190006968B86807F072FA94F9E9010428DBDA23 +:1091A000022007F0ADFB07460025A6E040226968D3 +:1091B000D8F8080007F062FAF2E7B8F80210404663 +:1091C000491C89B2A8F80210B94201D3002141809C +:1091D0000221B8F8020007F0EBFB002865D0B8F8D0 +:1091E0000200694606F0F1FBFFF740FF00B1FFDF28 +:1091F0009DF8000078B1B8F8020007F01DFD5FEAA5 +:10920000000900D1FFDF484606F08BFF18B1B8F81F +:10921000020002F03DF9B8F8020007F0FBFC5FEA3B +:10922000000900D1FFDF484606F073FFE8BB0321C9 +:10923000B8F8020007F0BCFB5FEA000B48D1FFDF83 +:1092400046E000BFDBF8100010B10078FF2849D0DD +:10925000022000F0C3FC0220FFF7DFFD82464846F3 +:1092600007F063F8CAF8040000B9FFDFDAF8040079 +:1092700007F02BF9002100900170B8F80210504659 +:10928000AAF8021001F00AFE484607F020F900B9DA +:10929000FFDF504600F0A8FC18B99AF8010000075B +:1092A00004D50099CBF8101012E024E0DBF8100090 +:1092B00038B10178491C11F0FF01017008D1FFDFBE +:1092C00006E000221146484600F0BDFB00B9FFDF72 +:1092D00094F9EA01022805DBB8F8020001F0A3FDC9 +:1092E0000028AFD194F9E901042804DB484607F0CF +:1092F00052F900B101266D1CEDB2BD4204D294F9C1 +:10930000EA010228BFF659AF002E7FF423AFBDE873 +:10931000F84F032000F062BC10B58B4CE060086889 +:109320002061AFF2D91002F012FD607010BD8748C5 +:1093300000214438017084480170854941607047BC +:1093400070B505464FF080500C46D0F8A410491C6B +:1093500005D1D0F8A810C9430904090C0BD050F866 +:10936000A01F01F001012970416821608068A08080 +:10937000287830B970BD062120460AF0AAFC0120E9 +:109380002870607940F0C000607170BD70B54FF01A +:1093900080540D46D4F88010491C0BD1D4F88410A9 +:1093A000491C07D1D4F88810491C03D1D4F88C107B +:1093B000491C0CD0D4F880100160D4F884104160AE +:1093C000D4F888108160D4F88C10C16002E01021BC +:1093D0000AF07FFCD4F89000401C0BD1D4F8940024 +:1093E000401C07D1D4F89800401C03D1D4F89C004D +:1093F000401C09D054F8900F286060686860A0682D +:10940000A860E068E86070BD2846BDE870401021A3 +:109410000AF05FBC4D480079FFE470B54B4CE07832 +:1094200030B3207804EB4010407A00F0070020446D +:1094300090F9E801002800DCFFDF2078002504EB2C +:109440004010407A00F00700011991F8E801401E31 +:1094500081F8E8012078401CC0B220700F2800D1AC +:109460002570A078401CA0700AF096FBE57070BDD6 +:10947000FFDF70BD3EB50546032107F099FA0446AB +:10948000284607F0C7FB054604B9FFDF206918B17D +:109490000078FF2800D1FFDF01AA6946284600F0C6 +:1094A000D2FA60B9FFDF0AE0002202A9284600F0E4 +:1094B000CAFA00B9FFDF9DF8080000B1FFDF9DF890 +:1094C0000000411E8DF80010EED2206901998842FB +:1094D00001D1002020613EBD70B50546A0F57F405A +:1094E0000C46FF3800D1FFDF012C01D0FFDF70BD3B +:1094F000FFF790FF040000D1FFDF207820F00F007D +:10950000401D20F0F0005030207065800020207257 +:1095100001202073BDE870407FE72DE9F041164639 +:109520000D460746FFF776FF040000D1FFDF2078E5 +:1095300020F00F00401D20F0F000503020706780B8 +:1095400001202072286805E01C000020DC030020B8 +:10955000C81400202061A888A0822673BDE8F041CD +:109560005BE77FB5FFF7EEFC040000D1FFDF02A947 +:109570002046FFF729FB054603A92046FFF73EFBDF +:109580008DF800508DF80100BDF80800001DADF801 +:109590000200BDF80C00001DADF80400E088ADF835 +:1095A0000600684606F08CFA002800D0FFDF7FBD79 +:1095B0002DE9F047DFF8FC930546002799F80000F5 +:1095C00010B10820BDE8F08728460AF0CDFE08B1AA +:1095D0001020F7E7F84C207808B9FFF76CFCA07A68 +:1095E000617A0844C6B200F064FAB04207D2301A79 +:1095F000C1B22A460020FFF783FC0700E2D1D9F868 +:1096000004004E46C01C20F00300C9F8040000F01E +:1096100040FB716800EB010801214046FFF70AFB9F +:10962000064629684044884202D8B6F5803F15D3E3 +:1096300028600020FFF786FC05000DD005F113001F +:10964000D9F8041020F003004E46884200D0FFDF16 +:109650006078401E607075600420B3E700214046CA +:10966000FFF7E8FA0446A64200D0FFDF04EB08014A +:10967000C9F8041029604FF6FF71A9F80210012102 +:1096800089F8001038469DE72DE9F0410446C948A5 +:1096900017460E46007810B10820BDE8F081084654 +:1096A0000AF03CFE08B11020F7E7C34D287808B94E +:1096B000FFF701FC601E1E2807D8012C22D130784C +:1096C000FE281FD828770020E7E7A4F120001F28F4 +:1096D00005D8E0B23A463146BDE8F04144E4A4F191 +:1096E00040001F2805D831462046BDE8F04100F073 +:1096F000A3BAA4F1A0001F2804D80020A02C03D0F6 +:10970000A12C06D00720C8E7317801F00101697764 +:10971000C3E731680922F82901D38B0701D010462D +:10972000BBE76B7C03F00303012B04D16B8BD733B6 +:109730009CB28C42F3D82962AFE72DE9F04781460D +:109740000E4608460AF010FE48B948460AF02AFEBE +:1097500028B909F1030020F00301494501D0102088 +:1097600030E795484FF0000A4430817869B141787C +:10977000804600EB411408343788324600212046E9 +:1097800000F040FA050004D027E0A6F800A005206C +:1097900018E7B9F1000F24D03088B84201D90C2560 +:1097A0001FE0607800F00705284600F017FA08EB84 +:1097B0000507324697F8E8014946401C87F8E8015A +:1097C000204607F5F47700F01DFA05463878401E6C +:1097D0003870032000F002FA2DB10C2D01D0A6F84C +:1097E00000A02846EEE66078724E00F007010129DD +:1097F00023D002290CD0032933D0FFDF98F80110C1 +:109800004046491CC9B288F801100F2934D035E010 +:10981000616821B1000702D46088FFF72BFE98F839 +:10982000EA014746012802D1707802F0AFFA97F9B1 +:10983000EA010428E2DBFFDFE0E7616819B14022BA +:10984000B06806F01BFF98F8E9014746032802D1EB +:10985000707802F09BFA97F9E9010428CEDBFFDF6C +:10986000CCE7C00602D56088FFF704FE98F9EB014B +:109870000628C3DBFFDFC1E780F801A08178491E1D +:109880008170617801F0070101EB080090F8E811A0 +:10989000491C80F8E811A4E770B50D4604460AF0AB +:1098A0003DFD18B928460AF05FFD08B1102070BDD3 +:1098B00029462046BDE8704008F0D9BD70B5044681 +:1098C00015460E4608460AF029FD18B928460AF042 +:1098D0004BFD08B1102070BD022C03D0102C01D01C +:1098E000092070BD2A463146204608F0E3FD0028D5 +:1098F000F7D0052070BD70B514460D4606460AF037 +:109900000DFD38B928460AF02FFD18B920460AF097 +:1099100049FD08B1102070BD22462946304608F0A6 +:10992000E8FD0028F7D0072070BD3EB504460AF0D8 +:109930001BFD08B110203EBD684604F00FFEFFF786 +:1099400095FB0028F7D19DF806002070BDF80800AF +:109950006080BDF80A00A08000203EBD70B50546BD +:109960000C4608460AF01EFD20B93CB120680AF0FA +:10997000FBFC08B1102070BDA08828B12146284604 +:10998000BDE87040FDF7BEBE092070BD70B504464D +:109990000D4608460AF0C2FC30B9601E1E2818D8D1 +:1099A00028460AF0BBFC08B1102070BD022C05D976 +:1099B000072070BD1C0000209803002004B9FFDFC1 +:1099C000F94800EB840050F8041C2846BDE87040BC +:1099D0000847A4F120001F2805D829462046BDE8E5 +:1099E0007040FAF792BCF02CE2D1A8680AF096FC1D +:1099F0000028D9D1284606F0CBF8BDE87040FFF723 +:109A000035BB70B504460D4608460AF0ADFC30B9CA +:109A1000601E1E280DD828460AF080FC08B11020D0 +:109A2000C7E7012C01D0022C01D10620C1E7072095 +:109A3000BFE7A4F120001F28F9D829462046BDE839 +:109A40007040FAF7BABC06F033BB38B50446D748C5 +:109A5000007B00F00105D9B9F9F78BFA0DB1226846 +:109A600000E00022D2484178C06804F06EFBD04884 +:109A70001030C0788DF8000010B1012802D004E049 +:109A8000012000E000208DF80000684604F0DFFDB2 +:109A9000002D02D020682830206038BD30B5C34D7D +:109AA00004466878A04200D8FFDF686800EB041025 +:109AB00030BD70B5BD4800252C46467807E02046ED +:109AC000FFF7ECFF4078641C2844C5B2E4B2B4420E +:109AD000F5D128466DE72DE9F0410C46064600F029 +:109AE00006F907463068C01C20F00302326014BB40 +:109AF000AE483B46082124300AF0EAFA002409E087 +:109B0000082C10D2DFE804F0060408080A04040652 +:109B1000A84804E0A84802E0A84800E0A8480AF0E5 +:109B2000F7FA054600E0FFDFA54200D0FFDF641C26 +:109B3000E4B2082CE4D3306800EB07103060ACE5E9 +:109B4000021D5143452900D245210844C01CB0FBE9 +:109B5000F2F0C0B270472DE9FC5F064693484FF023 +:109B600000088B464746444690F8019022E0204684 +:109B7000FFF794FF050000D1FFDF6878694638449D +:109B8000C7B22846FFF720F8824601A92846FFF70A +:109B900035F80346BDF804005246001D81B2BDF8F9 +:109BA0000000001D80B206F081FF6A78641C00FB93 +:109BB0000288E4B24C45DAD13068C01C20F00300C2 +:109BC0003060BBF1000F00D000204246394606F05D +:109BD0007BFF316808443060BDE8FC9F7349443125 +:109BE00008710020C870704770494431CA782AB1A2 +:109BF0000A7801EB42110831814201D001207047FF +:109C0000002070472DE9F04106460078154600F027 +:109C10000F0400201080601E0F46052800D3FFDFD0 +:109C200061482A46103000EB8400394650F8043C65 +:109C30003046BDE8F041184770B50C46402802D0C8 +:109C4000412806D120E0A07861780D18E1788142A2 +:109C500001D90720ADE62078012801D91320A8E614 +:109C6000FF2D08D808F0B0FD064609F04CFF301A69 +:109C7000801EA84201DA12209BE64C4821688160D0 +:109C800021790173002094E6BDE87040084600F099 +:109C90005EB82DE9F0470027DFF810A13E463D46AB +:109CA000B9463C469AF801800AE02046FFF7F6FEE6 +:109CB0004178807B0E4410FB0155641CE4B27F1C8C +:109CC0004445F2D109EB8700C6EBC60100EB8100E9 +:109CD0009AF8092000EB850101EBC2019AF80A20ED +:109CE0009AF80B0001EBC20101EB80006AE42DE958 +:109CF000F047DFF8B8900026344699F8090099F843 +:109D00000A2099F801700244D5B299F80B2010444A +:109D100000F0FF0808E02046FFF7C0FE817B407896 +:109D200011FB0066641CE4B2BC42F4D199F809004E +:109D300099F80A10284428444044401C01B10121EC +:109D400008448419FF2C00D9FFDFE0B23AE438B5AB +:109D50000446407800F00300012803D002280BD00D +:109D6000072038BD606858B10AF025FBD0B960689B +:109D70000AF018FB20B915E060680AF0CFFA88B93C +:109D800069462046FCF71EF90028EAD1607800F009 +:109D90000300022816D19DF8000098B160680AF00F +:109DA00001FB78B1102038BDB046020098030020B6 +:109DB0001C000020B941000017AC00005D2F00001E +:109DC000F32101006189F8290DD8208988420AD839 +:109DD000607800F003020A48012A06D1D731026AEE +:109DE00089B28A4201D20920DDE794E80E0000F131 +:109DF000100585E80E000AB9002101830020D2E792 +:109E0000980300202DE9F04107461446884608468D +:109E100001F01CFD064608EB88001C22796802EB65 +:109E2000C0000D18688C58B14146384601F016FD47 +:109E3000014678680078C200082305F120000CE094 +:109E4000E88CA8B14146384601F00FFD014678681C +:109E500008234078C20005F1240006F066FC38B102 +:109E6000062121726681D0E90010C4E9031009E0DF +:109E7000287809280BD00520207266816868E06088 +:109E8000002028702046BDE8F04101F0D5BC072035 +:109E900020726681F4E72DE9F04116460D4607462B +:109EA000406801EB85011C2202EBC10144182046E9 +:109EB00001F0FDFC40B10021708865F30F2160F3D3 +:109EC0001F4107200AF0DEF909202070324629469A +:109ED0003846BDE8F04195E72DE9F0410E460746CA +:109EE00000241C21F07816E004EB8403726801EB77 +:109EF000C303D25C6AB1FFF78DFA050000D1FFDF22 +:109F00006F802A4621463046FFF7C5FF0120BDE895 +:109F1000F081641CE4B2A042E6D80020F7E770B5F7 +:109F2000064600241C21C0780AE000BF04EB84032D +:109F3000726801EBC303D5182A782AB1641CE4B215 +:109F4000A042F3D8402070BD282128461AF0AFF96E +:109F5000706880892881204670BD70B50346002056 +:109F60001C25DC780DE000BF00EB80065A6805EB8D +:109F7000C6063244167816B1128A8A4204D0401CB2 +:109F8000C0B28442F0D8402070BDF0B50446002035 +:109F90001C26E5780EE000BF00EB8007636806EB47 +:109FA000C7073B441F788F4202D15B78934204D0AD +:109FB000401CC0B28542EFD84020F0BD0078032895 +:109FC00001D000207047012070470078022801D09E +:109FD00000207047012070470078072801D000203A +:109FE0007047012070472DE9F041064688461078F9 +:109FF000F1781546884200D3FFDF2C781C27641CBB +:10A00000F078E4B2A04201D8201AC4B204EB840173 +:10A01000706807EBC1010844017821B141468847C7 +:10A0200008B12C7073E72878A042E8D1402028704E +:10A030006DE770B514460B880122A240134207D188 +:10A0400013430B8001230A22011D06F038FB047024 +:10A0500070BD2DE9FF4F81B00878DDE90E7B9A468F +:10A0600091460E4640072CD4019806F0E5FD040009 +:10A0700000D1FFDF07F1040820461FFA88F105F040 +:10A0800024FF050000D1FFDF204629466A4606F07E +:10A090006EF90098A0F80370A0F805A0284606F015 +:10A0A00014FA017869F306016BF3C71101702046B9 +:10A0B0001FFA88F105F04CFF00B9FFDF019803F0AB +:10A0C000B9FF06EB0900017F491C017705B0BDE827 +:10A0D000F08F2DE9F84F0E469A4691460746032128 +:10A0E00006F066FC0446008DDFF8B485002518B143 +:10A0F00098F80000B0421ED1384606F09DFD0700DA +:10A1000000D1FFDF09F10401384689B205F0DDFE18 +:10A11000050010D0384629466A4606F028F900980E +:10A1200000210A460180817004F054F80098C01D97 +:10A13000CAF8000021E098F80000B04216D104F1FE +:10A14000260734F8341F012000FA06F911EA090F36 +:10A1500000D0FFDF2088012340EA090020800A2286 +:10A16000391D384606F0C6FA067006E0324604F19C +:10A17000340104F12600FFF75CFF0A2188F8001083 +:10A180002846BDE8F88FFEB514460D46064602ABDC +:10A190000C220621FFF79DFF002826D0029968783F +:10A1A00012220A70801C487008224A80A8702088F9 +:10A1B00088806088C880A0880881E0884881002461 +:10A1C0000C20CDE900040523062229463046FFF77E +:10A1D00040FF2146002266F31F41F023104609F09C +:10A1E000A7FF6878801C68700120FEBDFEB514468C +:10A1F0000D460622064602AB1146FFF76AFF00280D +:10A2000012D0029B132000211870A87858700220E9 +:10A2100058809C800620CDE900010246052329468E +:10A220003046FFF716FF0120FEBD2DE9FE430C4628 +:10A23000804644E002AB0E2207214046FFF749FF6B +:10A24000002841D060681C2267788678BF1C06EB26 +:10A25000860102EBC1014518029814210170477074 +:10A260000A214180698A0181E98A4181A988818026 +:10A27000A9898181304601F0E9FA02990523072274 +:10A28000C8806F700420287000250E20CDE90005DD +:10A2900021464046FFF7DDFE294666F30F2168F3AD +:10A2A0001F41F0230022072009F042FF6078FD499A +:10A2B000801C607062682046921CFFF794FE606804 +:10A2C00080784028B6D10120BDE8FE83FEB50D465A +:10A2D000064638E002AB0E2207213046FFF7F9FEB2 +:10A2E000002835D068681C23C17801EB810203EB9C +:10A2F000C2028418029815220270627842700A2203 +:10A300004280A2894281A2888281084601F09EFA99 +:10A31000014602988180618AC180E18A0181A0881A +:10A32000B8B10020207000210E20CDE900010523E6 +:10A33000072229463046FFF78CFE6A68DA4928462C +:10A34000D21CFFF750FE6868C0784028C2D10120B7 +:10A35000FEBD0620E6E72DE9FE430C46814644E0BB +:10A36000204601F08EFAD0B302AB082207214846FE +:10A37000FFF7AFFE0028A7D060681C226578067939 +:10A38000AD1C06EB860102EBC10147180298B7F835 +:10A39000108006210170457004214180304601F093 +:10A3A00055FA0146029805230722C180A0F80480CF +:10A3B0007D70082038700025CDE90005214648460B +:10A3C000FFF747FE294666F30F2169F31F41F0238B +:10A3D0000022072009F0ACFE6078801C6070626883 +:10A3E000B2492046121DFFF7FEFD60680179402941 +:10A3F000B6D1012068E72DE9F34F83B00E4680E027 +:10A40000304601F03EFA002875D071681C2091F8A2 +:10A41000068008EB880200EBC2000C18414630466B +:10A4200001F023FA0146A078C30070684078C200AA +:10A4300004F1240006F095F907468088E18B401A64 +:10A4400080B2002581B3AA46218B814200D80846FC +:10A450008146024602AB07210398FFF73AFE01004E +:10A4600028D0BAF1000F03D0029AB88802251080D4 +:10A470008B46E28B3968A9EB05001FFA80FA0A4483 +:10A480000398009206F0D8FBED1D009A59465346FA +:10A49000009505F0E6FFE08B504480B2E083B98878 +:10A4A000884209D1012508E0FFE7801C4FF0010A2E +:10A4B00080B2C9E7002009E60025CDE90095238A8E +:10A4C000072231460398FFF7C4FDE089401EE08172 +:10A4D0008DB1A078401CA0707068F178427811FBB3 +:10A4E00002F1CAB2816901230E3006F0E8F880F863 +:10A4F00000800020E08372686D493046921DFFF7AE +:10A5000072FD7068817940297FF47AAF0120DDE522 +:10A5100070B5064648680D4614468179402910D129 +:10A5200004EB84011C2202EBC101084401F0E0F9B4 +:10A53000002806D06868294684713046BDE870401E +:10A5400059E770BDFEB50C460746002645E020469B +:10A5500001F097F9D8B360681C22417901EB8101C1 +:10A5600002EBC1014518688900B9FFDF02AB082280 +:10A5700007213846FFF7ADFD002833D002996078F7 +:10A5800016220A70801C4870042048806068407958 +:10A5900001F05CF901460298052307228180698950 +:10A5A000C1800820CDE9000621463846FFF751FD5D +:10A5B0006078801C6070A88969890844B0F5803F84 +:10A5C00000D3FFDFA88969890844A8816E81626889 +:10A5D00038492046521DFFF706FD60684179402941 +:10A5E000B5D10120FEBD30B5438C458BC3F3C70404 +:10A5F000002345B1838B641EED1AC38A6D1E1D4472 +:10A6000095FBF3F3E4B22CB1008918B1A04200D855 +:10A61000204603444FF6FF70834200D30346138065 +:10A620000C7030BD2DE9FC41074616460D464868C2 +:10A6300002EB86011C2202EBC10144186A4601A903 +:10A640002046FFF7D0FFA089618901448AB2BDF896 +:10A650000010914212D0081A00D50020608168686D +:10A66000407940280AD1204601F038F9002805D069 +:10A670006868294646713846FFF764FFBDE8FC81EB +:10A680002DE9FE4F8946804615465088032106F085 +:10A690008FF98346B8F8020040280DD240200CE024 +:10A6A00030000020BD9F0000CB9F0000D99F00001C +:10A6B000F1B80000DDB80000403880B282460146A3 +:10A6C000584601F0DEF800287ED00AEB8A001C22F2 +:10A6D000DBF8041002EBC0000C18204601F0E7F88C +:10A6E000002877D1B8F80000E18A88423CD8A189D7 +:10A6F000D1B348456ED100265146584601F0AEF818 +:10A70000218C0F18608B48B9B9F1020F62D3B8F8E9 +:10A7100004006083618A884226D80226A9EB0600DD +:10A720001FFA80F9B888A28B801A002814DD4946E8 +:10A73000814500DA084683B2688869680291396801 +:10A740000A44CDE9003206F065FADDE90121F61D83 +:10A75000009B009605F051FEA18B01EB090080B231 +:10A76000A083618B884207D9688803B05246594656 +:10A77000BDE8F04F01F0D9B81FD14FF009002872A1 +:10A78000B8F802006881D7E90001C5E90401608BCF +:10A79000A881284601F050F85146584601F05EF86D +:10A7A0000146DBF8040008230078C20004F1200011 +:10A7B00005F0BBFF0020A0836083A0890AF0FF02A0 +:10A7C000401EA081688800E004E003B05946BDE85F +:10A7D000F04F27E7BDE8FE8F2DE9F041064615460C +:10A7E0000F461C46184609F099FD18B9206809F073 +:10A7F000BBFD08B1102015E47168688C0978B0EBD6 +:10A80000C10F01D313200DE43946304601F026F87C +:10A810000146706808230078C20005F1200005F0A9 +:10A820004EFFD4E90012C0E900120020E3E710B5A2 +:10A830000446032106F0BCF80146007800F003004E +:10A84000022805D02046BDE8104001F114029AE428 +:10A850008A8A2046BDE81040C8E470B5044603214A +:10A8600006F0A6F8054601462046FFF774FD0028CD +:10A8700016D029462046FFF765FE002810D029464D +:10A880002046FFF723FD00280AD029462046FFF77F +:10A89000CCFC002804D029462046BDE87040AAE53B +:10A8A00070BD2DE9F0410C4680461EE0E17842780B +:10A8B00011FB02F1CAB2816901230E3005F035FFA8 +:10A8C000077860681C22C179491EC17107EB8701B6 +:10A8D000606802EBC10146183946204600F0D1FFFE +:10A8E00018B1304600F0DCFF20B16068C179002962 +:10A8F000DCD180E7FEF78EFD050000D1FFDF0A20E6 +:10A900002872384600F0A2FF68813946204600F0E0 +:10A91000ACFF0146606808234078C20006F12400BD +:10A9200005F003FFD0E90010C5E90310A5F8028087 +:10A93000284600F081FFB07800B9FFDFB078401EF4 +:10A94000B07058E770B50C460546032106F030F8A4 +:10A9500001464068C2792244C2712846BDE8704071 +:10A960009FE72DE9FE4F8246507814460F464FF080 +:10A97000000800284FD0012807D0022822D0FFDF8E +:10A980002068B8606068F86024E702AB0E220821F6 +:10A990005046FFF79EFB0028F2D0029815210523B0 +:10A9A0000170217841700A214180C0F80480C0F80C +:10A9B0000880A0F80C80628882810E20CDE9000812 +:10A9C000082221E0A678304600F040FF054606EB5D +:10A9D00086012C22786802EBC1010822465A02AB9C +:10A9E00011465046FFF775FB0028C9D00298072191 +:10A9F0000170217841700421418008218580C68042 +:10AA0000CDE9001805230A4639465046FFF721FBD9 +:10AA100087F80880DEE6A678022516B1022E13D04C +:10AA2000FFDF2A1D914602AB08215046FFF751FB7C +:10AA30000028A5D002980121022E017021784170D2 +:10AA40004580868002D005E00625EAE7A188C1801E +:10AA5000E1880181CDE90098052308223946504656 +:10AA6000D4E710B50446032105F0A2FF014600F12A +:10AA700008022046BDE8104073E72DE9F05F0C4660 +:10AA800001281DD0957992F80480567905EB85014F +:10AA90001F2202EBC10121F0030B08EB060111FBA1 +:10AAA00005F14FF6FF7202EAC10909F1030115FB36 +:10AAB0000611F94F21F0031A40B101283DD124E0DD +:10AAC0006168E57891F800804E78DFE7594678684C +:10AAD00005F0A9FD606000B9FFDF5946606819F014 +:10AAE00008FCE5705146786805F09DFD6168486195 +:10AAF00000B9FFDF6068426902EB090181616068AB +:10AB000080F800806068467017E0606852464169CE +:10AB1000786805F0B3FD5A466168786805F0AEFDC7 +:10AB2000032005F0EDFE0446032005F0F1FE201A97 +:10AB3000012802D1786805F06BFD0BEB0A00BDE837 +:10AB4000F09F02460021022097E773B5D24D0A20FC +:10AB50002870009848B100244FEA0D0005F045FD2B +:10AB6000002C01D1009969607CBD01240020F5E72B +:10AB700070B50C4615463821204619F0BAFB01265F +:10AB800066700A2104F11C0019F0B3FB05B9FFDF60 +:10AB9000297A207861F301002070A879002817D065 +:10ABA0002A4621460020FFF768FF61684020887030 +:10ABB0006168C8706168087161684871616888710E +:10ABC0006168288808816168688848816068868132 +:10ABD00070BDC878002802D0002201204DE77047E0 +:10ABE00070B50546002165F31F41002009F04AFBBE +:10ABF0000321284605F0DCFE040000D1FFDF2146DA +:10AC00002846FFF769F9002804D0207840F01000AA +:10AC10002070012070BD2DE9FF4180460E460F0CCB +:10AC2000FEF7F8FB050007D06F800321384605F0DA +:10AC3000BFFE040008D106E004B03846BDE8F0418C +:10AC40001321F9F7FBBEFFDF5FEA080005D0B8F17A +:10AC5000070F18D0FFDFBDE8FF8120782A4620F0DB +:10AC6000080020700020ADF8020002208DF80000DE +:10AC70004FF6FF70ADF80400ADF80600694638469F +:10AC8000F9F7EFFAE7E7C6F3072101EB81021C238E +:10AC9000606803EBC202805C042803D008280AD055 +:10ACA000FFDFD8E7012000904FF440432A462046BA +:10ACB00000F004FECFE704B02A462046BDE8F0418C +:10ACC000FFF7E9B82DE9F05F0027B0F80A90904649 +:10ACD0000C4605463E46B9F1400F01D2402001E046 +:10ACE000A9F140001FFA80FA287AC01E08286BD20A +:10ACF000DFE800F00D04192058363C477227102673 +:10AD0000002C6CD0D5E90301C4E902015CE0702796 +:10AD10001226002C63D00A2205F10C0104F1080070 +:10AD200019F08BFA50E071270C26002C57D0E868F8 +:10AD3000A06049E0742710269CB3D5E90301C4E95B +:10AD400002016888032105F033FE8346FEF762FBAB +:10AD500002466888508051465846FFF753F833E062 +:10AD600075270A26ECB1A88920812DE076271426C4 +:10AD7000BCB105F10C0004F1080307C883E8070023 +:10AD800022E07727102664B1D5E90301C4E9020166 +:10AD90006888032105F00CFE01466888FFF781FDF5 +:10ADA00012E01CE073270826CCB16888032105F067 +:10ADB000FFFD01460078C00606D56888FFF78CF8CD +:10ADC00010B96888F8F71DFEA8F800602CB127803C +:10ADD000A4F8069066806888A0800020AFE6A8F8F6 +:10ADE0000060FAE72DE9FC410C461E4617468046F6 +:10ADF000032105F0DDFD05460A2C0AD2DFE804F048 +:10AE000005050505050509090907042303E00623CF +:10AE100001E0FFDF0023CDE90076224629464046C7 +:10AE2000FFF717F92AE438B50546A0F57F40FF384B +:10AE300030D0284605F0EEFE040000D1FFDF2046AA +:10AE400005F073FA002815D001466A46204605F041 +:10AE50008EFA00980321B0F80540284605F0A8FDB9 +:10AE60000546052C03D0402C05D2402404E0007A8E +:10AE700080B1002038BD403CA4B2214600F001FD65 +:10AE800040B1686804EB84013E2202EBC101405AE4 +:10AE90000028EFD0012038BD300000202DE9F04F10 +:10AEA000044689B0408805F0B5FE050000D1FFDFFB +:10AEB00006AA2846616800F0BDFC069D001F81B20D +:10AEC00035F8032F6B888A4205D1042B0AD0052B55 +:10AED0001DD0062B15D022462846FFF7D1FB09B01E +:10AEE000BDE8F08F16462D1D224629463046F7F75D +:10AEF00054FA0828F3D1224629463046FCF749FC8B +:10AF0000EDE76088291D6368FAF7C8FCE7E7174694 +:10AF10006088032105F04CFD4FF000088DF8048097 +:10AF20000646ADF80680042FD9D36A79002AD6D018 +:10AF300028794FF6FF794FF01C0A13282CD008DC33 +:10AF4000012878D0062847D0072875D0122874D158 +:10AF500006E0142872D0152871D016286DD1ACE106 +:10AF60000C2F6AD1307800F00301022965D140F03E +:10AF7000080030706879B07001208DF804002889CD +:10AF8000ADF808006889ADF80A00A889ADF80C0092 +:10AF9000E889ADF80E0019E0B07890429FD1307882 +:10AFA00001079CD5062F9AD120F0080030706088E8 +:10AFB000414660F31F41002009F064F902208DF83A +:10AFC0000400ADF808902889ADF80A006088224690 +:10AFD00001A9F9F746F982E7082F80D12F89B5F842 +:10AFE0000A90402F01D2402001E0A7F1400080B23A +:10AFF00080460146304600F044FC08B3716808EB17 +:10B0000088002C2202EBC000095A4945E3D1FE48D2 +:10B0100007AAD0E90210CDE9071068798DF81C0065 +:10B0200008F0FF058DF81E5060883146FFF799FC47 +:10B030002246294639E0B6E014E03CE039E0E6E09B +:10B04000F148D0E90010CDE907106879ADF820701B +:10B050008DF81C00ADF82290608807AA3146FFF7F2 +:10B0600080FC3CE7082FB6D16889B5F808804028F5 +:10B0700001D2402000E0403887B23946304600F027 +:10B0800000FC0028A7D007EB870271680AEBC2001A +:10B090000844028A42459ED1017808299BD1407814 +:10B0A0006979884297D1F9B222463046FEF7F3FE1D +:10B0B00015E70E2F07D0CDF81C80CDF820806879D9 +:10B0C0008DF81C00C8E76989EF898B46B5F80C90AC +:10B0D0003046FEF742FFABF14001402901D3092081 +:10B0E0004AE0B9F1170F01D3172F01D20B2043E02B +:10B0F00040280ED000EB800271680AEBC2000844C1 +:10B100000178012903D1407869798842A9D00A20C1 +:10B1100032E03046FEF703FF014640282BD001EB1A +:10B12000810372680AEBC30002EB0008012288F871 +:10B1300000206A7988F8012070682A894089B8421D +:10B1400000D938462D8A03232372A282E781208208 +:10B15000A4F80C906582084600F078FB6081A8F89E +:10B160001490A8F81870A8F80E50A8F810B020464F +:10B1700000F062FBB3E6042005212172A4F80A80E6 +:10B18000E08101212173A049D1E90421CDE9072102 +:10B1900069798DF81C10ADF81E00608807AA314649 +:10B1A000FFF7DFFBE3E7062FE4D3B078904215D139 +:10B1B0003078010712D520F00800307060884146D1 +:10B1C00060F31F41002009F05DF802208DF80400B3 +:10B1D0002889ADF80800ADF80A90F7E6042130465A +:10B1E000FEF7D3FE05464028C4D00220830300901A +:10B1F00022462946304600F061FB4146608865F3EF +:10B200000F2160F31F41072009F03CF867E60E2F7D +:10B21000B0D104213046FEF7B8FE81464028A9D0BF +:10B220004146608869F30F2160F31F41072009F050 +:10B2300029F8288A0790E88900907068AF894089CA +:10B24000B84200D938468346B5F80A802889059067 +:10B25000484600F0FBFA6081079840B10220079B46 +:10B26000009022464946304600F028FB37E6B8F108 +:10B27000170F1ED3172F1CD3042020720098608252 +:10B28000E781A4F810B0A4F80C8009EB890271687A +:10B290000AEBC2000D1800990598A5F81480A5F8CE +:10B2A00018B0E9812882204600F0C6FA06202870EE +:10B2B00015E601200B230090D3E7082FA6D129899A +:10B2C0003046FEF74AFE074640289FD007EB87022C +:10B2D00071680AEBC2000844804600F0E8FA0028D2 +:10B2E00094D16D89B8F80E002844B0F5803F05D39D +:10B2F00060883A46314600F018FBF0E5002D85D015 +:10B30000A8F80E0060883A463146FFF701F9082098 +:10B310002072384600F09AFA6081A58127E770B55F +:10B320000D460646032105F043FB040004D02078B7 +:10B33000000704D5112070BD43F2020070BD2A46FB +:10B3400021463046FEF71FFF18B92868606168681B +:10B35000A061207840F008002070002070BD70B51A +:10B360000D460646032105F023FB040004D0207897 +:10B37000000704D4082070BD43F2020070BD2A46C5 +:10B3800021463046FEF732FF00B9A582207820F032 +:10B3900008002070002070BD2DE9F04F0E4691B0DE +:10B3A0008046032105F004FB0446404605F044FCBA +:10B3B00007460020079008900990ADF830000A90E9 +:10B3C00002900390049004B9FFDF0DF1080917BB48 +:10B3D000FFDF20E038460BA9002204F069FE9DF84B +:10B3E0002C0000F07F050A2D00D3FFDF6019017FDC +:10B3F000491E01779DF82C0000060CD52A460CA9A1 +:10B4000007A8FEF716FE01E0D846020019F805105D +:10B41000491C09F80510761EF6B2DBD204F134009F +:10B42000FA4D04F1260BDFF8E8A304F12A07069091 +:10B4300010E05846069900F06AFA064628700A2875 +:10B4400000D3FFDF5AF8261040468847E08CC05DE5 +:10B45000B04202D0208D0028EBD10A202870EC4D9C +:10B460004E4628350EE00CA907A800F050FA044615 +:10B47000375D55F8240000B9FFDF55F82420394620 +:10B4800040469047BDF81E000028ECD111B027E5DA +:10B4900010B5032105F08CFA040000D1FFDF0A216A +:10B4A00004F11C0018F025FF207840F00400207003 +:10B4B00010BD10B50C46032105F07AFA2044007F38 +:10B4C000002800D0012010BD2DE9F84F894615460F +:10B4D0008246032105F06CFA070004D0284608F0E4 +:10B4E0001DFF40B903E043F20200BDE8F88F484673 +:10B4F00008F03AFF08B11020F7E7786828B16988AA +:10B500000089814201D90920EFE7B9F800001C2425 +:10B5100018B1402809D2402008E03846FEF7FFFC69 +:10B520008046402819D11320DFE7403880B280469A +:10B530000146384600F0A5F948B108EB8800796863 +:10B5400004EBC000085C012803D00820CDE70520EB +:10B55000CBE7FDF75FFF06000BD008EB88007968AA +:10B5600004EBC0000C18B9F8000020B1E88910B154 +:10B5700013E01120B9E72888172802D36888172814 +:10B5800001D20720B1E7686838B12B1D2246414639 +:10B590003846FFF721F90028A7D104F10C026946CB +:10B5A0002046FFF720F8288860826888E082B9F892 +:10B5B000000030B102202070E889A080E889A0B1A5 +:10B5C0002BE003202070A889A0807868817840292A +:10B5D00005D180F8028039465046FEF726FE4046E7 +:10B5E00000F034F9A9F8000021E07868218B408947 +:10B5F000884200D908462083A6F802A004203072B1 +:10B60000B9F800007081E0897082F181208B30826E +:10B61000A08AB081304600F00FF97868C1784029DF +:10B6200005D180F8038039465046FEF74FFE0020D2 +:10B630005BE770B50D460646032105F0B9F9040035 +:10B6400003D0402D04D2402503E043F2020070BD38 +:10B65000403DADB2294600F014F958B105EB850123 +:10B660001C22606802EBC101084400F020F918B107 +:10B67000082070BD052070BD2A462146304600F0E6 +:10B6800054F9002070BD2DE9F0410D461646804664 +:10B69000032105F08DF90446402D01D2402500E03C +:10B6A000403DADB28CB1294600F0EBF880B105EB1E +:10B6B00085011C22606802EBC1014718384600F082 +:10B6C000F6F838B10820BDE8F08143F20200FAE74D +:10B6D0000520F8E733463A4629462046FFF77CF82E +:10B6E0000028F0D1EAB221464046FEF79BFF002039 +:10B6F000E9E72DE9F0410D4616468046032105F0A5 +:10B7000057F90446402D01D2402500E0403DAFB23C +:10B7100024B1304608F002FE38B902E043F20200DC +:10B72000D1E7306808F0FAFD08B11020CBE73946C0 +:10B73000204600F0A6F860B107EB87011C22606884 +:10B7400002EBC1014518284600F0B1F818B10820F5 +:10B75000B9E70520B7E7B088A98A884201D90C204B +:10B76000B1E76168E88C4978B0EBC10F01D31320D1 +:10B77000A9E73946204600F078F8014660680823BA +:10B780004078C20005F1240004F099FFD6E90012C8 +:10B79000C0E90012FAB221464046FEF7B9FE002089 +:10B7A00091E72DE9F0470D461F469046814603215B +:10B7B00005F0FEF80446402D01D2402001E0A5F13D +:10B7C000400086B23CB14DB1384608F0EBFD50B1B7 +:10B7D0001020BDE8F08743F20200FAE76068C8B1C4 +:10B7E000A0F80C8024E03146204600F04AF888B1E9 +:10B7F00006EB86011C22606802EBC1014518284651 +:10B8000000F055F840B10820E3E7000030000020C8 +:10B81000F04602000520DCE7A5F80880F2B22146D8 +:10B820004846FEF7FFFE1FB1A889698908443880A1 +:10B830000020CEE704F09BBD017821F00F01491CE8 +:10B8400021F0F00110310170FDF7E7BD10B504469D +:10B85000402800D9FFDF4034A0B210BD40684269E3 +:10B860000078484302EBC0007047C2784068037814 +:10B8700012FB03F24378406901FB032100EBC10096 +:10B880007047C2788A4209D9406801EB81011C22C5 +:10B8900002EBC101405C08B10120704700207047F5 +:10B8A0000078062801D901207047002070470078F1 +:10B8B000062801D00120704700207047F0B401EB4A +:10B8C00081061C27446807EBC6063444049D052600 +:10B8D0002670E3802571F0BCFEF794BA10B541895B +:10B8E00011B1FFF7DDFF08B1002010BD012010BD30 +:10B8F00010B5C18C8278B1EBC20F04D9C18911B1E6 +:10B90000FFF7CEFF08B1002010BD012010BD10B51B +:10B910000C4601230A22011D04F007FF007821884C +:10B92000012282409143218010BDF0B402EB8205D8 +:10B930001C264C6806EBC505072363554B681C792C +:10B94000402C03D11A71F0BCFEF705BDF0BC704766 +:10B9500010B5EFF3108000F0010472B6EE484178A4 +:10B96000491C41704078012801D1F7F70DFB002CEC +:10B9700000D162B610BD70B5E74CE07848B901253A +:10B98000E570FFF7E5FFF7F707FB20B1002008F0AF +:10B990000AF9002070BD4FF080406571C0F8045373 +:10B9A000F7E770B5EFF3108000F0010572B6DA4CDE +:10B9B000607800B9FFDF6078401E6070607808B979 +:10B9C000F7F7E6FA002D00D162B670BDD24810B587 +:10B9D000C17821B100214171C170FFF7E2FF002061 +:10B9E00010BD10B50446F7F7D7FACB49C97808401F +:10B9F00000D001202060002010BD2DE9F05FDFF8AD +:10BA000018934278817889F80620002589F8071074 +:10BA1000064689F8085000782F4620B101280FD03B +:10BA200002280FD0FFDFF7F7C4FA98B1F7F7C8FA8A +:10BA3000A8420FD12846F7F7C7FA0028FAD047E006 +:10BA40000125F0E7FFF784FFF7F7A6FA0028FBD0FF +:10BA50000225E8E701208407E060C4F80471AF49DB +:10BA60000D600107D1F84412AC4AC1F342312432CF +:10BA70001160AA49343108604FF0020BC4F804B3D6 +:10BA8000A060DFF89CA2DAF80010C94341F300116E +:10BA900001F10108DAF8001041F01001CAF80010B5 +:10BAA00000E020BFD4F804010028FAD02846F7F7B8 +:10BAB0008BFA0028FAD0B8F1000F05D1DAF800109F +:10BAC00021F01001CAF80010C4F808B3C4F80471DA +:10BAD00099F807004C4670B1307860B9F7F75CFA16 +:10BAE000064608F0BDF96FF0004116B1C4E9031035 +:10BAF00001E0C4E9030115B12771BDE8F09F012001 +:10BB00002071BDE8F05F00F0ABB870B5050000D162 +:10BB1000FFDF4FF080424FF0FF30C2F808030021F2 +:10BB2000C2F80011C2F80411C2F80C11C2F81011C9 +:10BB3000794C6170F7F736FA10B10120E07060704F +:10BB40002846BDE8704058E72DE9F05F7548D0F809 +:10BB500000B0744A7449083211608406D4F80801B0 +:10BB600008B1012600E00026D4F8000110B14FF022 +:10BB7000010801E04FF00008D4F8040108B10127E2 +:10BB800000E00027D4F80C0100B101208246D4F86F +:10BB9000100108B1012100E00021894646EA0801B0 +:10BBA00027EA010020EA0A0030EA090000D0FFDF9E +:10BBB000002526B1C4F80851012007F0F4FF564EC5 +:10BBC000B8F1000F10D0C4F80051707918B1757138 +:10BBD000002007F0E8FF307830B10120534935707C +:10BBE000B07002220A6020610FB1C4F80451BAF1AA +:10BBF000000F0BD0C4F80C51B07800B9FFDF4B48F0 +:10BC00000560B57001206061FFF7CBFEB9F1000F50 +:10BC100005D0C4F81051307908B100F045F8414919 +:10BC2000091DC1F800B068E770B53B4DE87808B968 +:10BC3000F7F7AEF901208407A061A87858B100BFDA +:10BC4000D4F80C0120B90020F7F7BEF90028F7D18D +:10BC50000020C4F80C014FF0FF30C4F8080370BD99 +:10BC60002DE9F0411926B407C4F808630125A56140 +:10BC70000020C4F80001C4F80C01C4F81001F7F763 +:10BC80008BF9254F28B12949BD7002200860256134 +:10BC900000E03D70FFF75CFE2049B8792031086074 +:10BCA000C4F80463BDE8F0812DE9F0411A4C4FF06F +:10BCB00080470125E079F0B1012803D0217A401EA8 +:10BCC000814218DAF7F768F9064608F0C9F8E17911 +:10BCD000012902D9217A491C21720EB1216900E0A3 +:10BCE000E168411A022902DA11F1020F0EDC0EB1ED +:10BCF000206100E0E060FFF72BFEF7F74DF938B167 +:10BD00000A49022008603D61A57002E07D61C9E733 +:10BD1000257000202072C5E73C0000201805004077 +:10BD200010ED00E01005024001000001340C00405D +:10BD30004FF0E0214FF00070C1F88001C1F880029F +:10BD4000384B802283F80024C1F80001704700B509 +:10BD500002460420344903E001EBC0031B792BB1F8 +:10BD6000401EC0B2F8D2FFDFFF2000BD41F83020F6 +:10BD700001EBC00100224A718A7101220A7100BDE3 +:10BD8000294A002102EBC0000171704710B504463A +:10BD9000042800D3FFDF244800EBC40420790128E5 +:10BDA00000D0FFDF6079A179401CC0B2814200D091 +:10BDB00060714FF0E0214FF00070C1F8000210BD3B +:10BDC0002DE9F041194805681849194808310860FB +:10BDD0001448042690F80004134F4009154C042819 +:10BDE00018D0FFDF16E0217807EBC1000279012AA5 +:10BDF00008D1427983799A4204D04279827157F806 +:10BE0000310080472078401CC0B22070042801D344 +:10BE100000202070761EF6B2E5D20448001D0560B1 +:10BE2000BDE8F08119E000E0C805002010050240DF +:10BE30000100000150000020F8B51D46DDE906476D +:10BE40000E000AD004F0F8FE2346FF1DBCB23146B6 +:10BE50002A46009404F005FBF8BDD0192246194685 +:10BE600018F0A6F92046F8BD70B50D46044610211D +:10BE700018F01DFA258117206081A07B40F00A0090 +:10BE8000A07370BD4FF6FF720A800146022008F0D1 +:10BE9000F9B9704700897047827BD30701D19207B7 +:10BEA00003D4808908800020704705207047827B7A +:10BEB000920700D58181704701460020098841F62C +:10BEC000FE52114200D00120704700B50346807B2E +:10BED000C00701D0052000BD59811846FFF7ECFFCF +:10BEE000C00703D0987B40F004009873987B40F023 +:10BEF00001009873002000BD827B520700D509B174 +:10BF00004089704717207047827B61F3C3028273B8 +:10BF100070472DE9FC5F0E460446017896460120E5 +:10BF200000FA01F14DF6FF5201EA020962684FF68C +:10BF3000FF7B1188594502D10920BDE8FC9FB9F16A +:10BF4000000F05D041F6FE55294201D00120F4E74B +:10BF500041EA090111801D0014D04FF0000C85F852 +:10BF600000C023780521032267464FF0020A0E2BFA +:10BF700074D2DFE803F0F809252F4762697447900F +:10BF800092B3D0D70420D8E7616820898B7B9B07C8 +:10BF90007DD5172848D30B89834245D38989172932 +:10BFA00001D3814240D185F800A0A5F8010032807C +:10BFB000616888816068817B21F002018173C5E03E +:10BFC000042028702089A5F801006089A5F80300E5 +:10BFD0003180BBE0208A3188C01D1FFA80F84145BE +:10BFE00022D3062028702089A5F801006089A5F8D1 +:10BFF0000300A089A5F805000721208ACDE90001EA +:10C0000063693EE0082B10D0082028702089A5F82D +:10C0100001006089A5F8030031806A1D694604F1BA +:10C020000C0006F066FA10B15FE01020EDE73088F2 +:10C030009DF800100844308088E00A20287020898C +:10C04000A5F80100328045E00C2028702089A5F871 +:10C0500001006089A5F8030031803BE083E021897D +:10C06000338800EB41021FFA82F843453DD3B8F113 +:10C07000050F3AD30E222A700BEA4101CDE90010D8 +:10C08000E36860882A467146FFF7D6FE00E04DE07F +:10C09000A6F800805AE04020287060893188C01CD2 +:10C0A0001FFA80F8414520D32878714620F03F00E0 +:10C0B000123028702089A5F801006089CDE90002BE +:10C0C00060882A46E368FFF7B7FEA6F80080287864 +:10C0D00040063BD461682089888037E0A089328897 +:10C0E000401D1FFA80F8424501D204273EE0162089 +:10C0F00028702089A5F801006089A5F80300A089AF +:10C10000CDE9000160882A4671462369FFF794FE55 +:10C11000A6F80080DEE718202870207A6870A6F85C +:10C1200000A013E061680A88920401D405271DE08D +:10C13000C9882289914201D0062717E01E21297063 +:10C1400030806068018821F400510180B9F1000F4E +:10C150000CD0618878230022022007F0E9FF616893 +:10C160002078887007E0A6F800C00327606801887F +:10C1700021EA090101803846DFE62DE9FF4F85B04D +:10C180001746129C0D001E461CD03078C10703D004 +:10C1900000F03F00192801D9012100E000212046CC +:10C1A000FFF7AAFEA8420DD32088A0F57F41FF39F2 +:10C1B00008D03078410601D4000605D5082009B022 +:10C1C000BDE8F08F0720FAE700208DF800008DF819 +:10C1D000010030786B1E00F03F0C0121A81E4FF0CB +:10C1E000050A4FF002094FF0030B9AB2BCF1200F81 +:10C1F00075D2DFE80CF08B10745E7468748C749CDC +:10C2000074B674BB74C974D574E2747474F274F047 +:10C2100074EF74EE748B052D78D18DF80090A078B2 +:10C220008DF804007088ADF8060030798DF80100B3 +:10C23000707800F03F000C2829D00ADCA0F1020041 +:10C24000092863D2DFE800F0126215621A621D62EB +:10C250002000122824D004DC0E281BD01028DBD1AB +:10C260001BE016281FD01828D6D11FE020788007A1 +:10C2700001E020784007002848DAEFE02078000746 +:10C28000F9E72078C006F6E720788006F3E7207803 +:10C290004006F0E720780006EDE72088C005EAE7D1 +:10C2A00020884005E7E720880005E4E72088C004EF +:10C2B000E1E72078800729D5032D27D18DF800B03C +:10C2C000B6F8010082E0217849071FD5062D1DD35D +:10C2D00081B27078012803D0022817D102E0CAE0A9 +:10C2E000022000E0102004228DF8002072788DF8E2 +:10C2F0000420801CB1FBF0F2ADF8062092B242435C +:10C300008A4203D10397ADF80890A7E07AE020783D +:10C31000000777D598B282088DF800A0ADF8042008 +:10C32000B0EB820F6ED10297ADF8061096E021783F +:10C33000C90667D5022D65D381B206208DF80000AD +:10C34000707802285ED300BFB1FBF0F28DF80400D4 +:10C35000ADF8062092B242438A4253D1ADF808901C +:10C360007BE0207880064DD5072003E0207840064A +:10C370007FD508208DF80000A088ADF80400ADF846 +:10C380000620ADF8081068E02078000671D5092075 +:10C39000ADF804208DF80000ADF8061002975DE0BE +:10C3A0002188C90565D5022D63D381B20A208DF895 +:10C3B0000000707804285CD3C6E72088400558D573 +:10C3C000012D56D10B208DF80000A088ADF8040097 +:10C3D00044E021E026E016E0FFE72088000548D58C +:10C3E000052D46D30C208DF80000A088ADF8040080 +:10C3F000B6F803006D1FADF80850ADF80600ADF8B3 +:10C400000AA02AE035E02088C00432D5012D30D1C1 +:10C410000D208DF8000021E02088800429D4B6F892 +:10C420000100E080A07B000723D5032D21D33078C5 +:10C4300000F03F001B2818D00F208DF80000208846 +:10C4400040F40050A4F80000B6F80100ADF8040074 +:10C45000ED1EADF80650ADF808B003976946059893 +:10C46000F5F7E6FC050008D016E00E208DF8000078 +:10C47000EAE7072510E008250EE0307800F03F00DD +:10C480001B2809D01D2807D00220059907F0FAFEC5 +:10C49000208800F400502080A07B400708D520466B +:10C4A000FFF70AFDC00703D1A07B20F00400A073B2 +:10C4B000284684E61FB5022806D101208DF8000029 +:10C4C00088B26946F5F7B4FC1FBD0000F8B51D46FB +:10C4D000DDE906470E000AD004F0AEFB2346FF1D3F +:10C4E000BCB231462A46009403F0BBFFF8BDD01918 +:10C4F0002246194617F05CFE2046F8BD2DE9FF4F95 +:10C500008DB09B46DDE91B57DDF87CA00C46082B5F +:10C5100005D0E06901F002F950B11020D2E028887E +:10C52000092140F0100028808AF80010022617E048 +:10C53000E16901208871E2694FF420519180E1693D +:10C540008872E06942F601010181E069002181738E +:10C550002888112140F0200028808AF80010042645 +:10C5600038780A900A2038704FF0020904F1180058 +:10C570004D460C9001F095FBB04681E0BBF1100FE9 +:10C580000ED1022D0CD0A9EB0800801C80B2022134 +:10C59000CDE9001005AB52461E990D98FFF796FFA6 +:10C5A000BDF816101A98814203D9F74800790F9008 +:10C5B00004E003D10A9808B138702FE04FF002016F +:10C5C000CDE900190DF1160352461E990D98FFF79B +:10C5D0007DFF1D980088401B801B83B2C6F1FF00C1 +:10C5E000984200D203461E990BA8D9B15FF0000211 +:10C5F000DDF878C0CDE9032009EB060189B2CDE969 +:10C6000001C10F980090BDF8161000220D9801F09E +:10C61000CBFB387070B1C0B2832807D0BDF81600CC +:10C6200020833AE00AEB09018A19E1E7022011B000 +:10C63000BDE8F08FBDF82C00811901F0FF08022D34 +:10C640000DD09AF80120424506D1BDF82010814254 +:10C6500007D0B8F1FF0F04D09AF801801FE08AF8E4 +:10C660000180C94800680178052902D1BDF816107B +:10C67000818009EB08001FFA80F905EB080085B2FC +:10C68000DDE90C1005AB0F9A01F00EFB28B91D98DF +:10C690000088411B4145BFF671AF022D13D0BBF19D +:10C6A000100F0CD1A9EB0800801C81B20220CDE94B +:10C6B000000105AB52461E990D98FFF707FF1D9824 +:10C6C0000580002038700020B1E72DE9F8439C4632 +:10C6D000089E13460027B26B9AB3491F8CB2F18FA4 +:10C6E000A1F57F45FF3D05D05518AD882944891D2A +:10C6F0008DB200E000252919B6F83C80083141458B +:10C7000020D82A44BCF8011022F8021BBCF8031000 +:10C7100022F8021B984622F8024B914604F07AFA5E +:10C720004FF00C0C41464A462346CDF800C003F0BA +:10C7300064FEF587B16B00202944A41D21440880C4 +:10C7400003E001E0092700E083273846BDE8F883CD +:10C7500010B50B88848F9C420CD9846BE018048838 +:10C7600044B1848824F40044A41D23440B80106049 +:10C77000002010BD0A2010BD2DE9F0478AB0002529 +:10C78000904689468246ADF8185007274BE0059839 +:10C7900006888088000446D4A8F8006007A80195A0 +:10C7A00000970295CDE903504FF400730022314603 +:10C7B000504601F0F9FA04003CD1BDF81800ADF87C +:10C7C0002000059804888188B44216D10A0414D444 +:10C7D00001950295039521F400410097049541F4D9 +:10C7E000804342882146504601F0B4F804000BD142 +:10C7F0000598818841F40041818005AA08A948462E +:10C80000FFF7A6FF0400DCD000970598029501957C +:10C81000039504950188BDF81C300022504601F0B4 +:10C8200099F80A2C06D105AA06A94846FFF790FFF9 +:10C830000400ACD0ADF8185004E00598818821F4CC +:10C840000041818005AA06A94846FFF781FF00281C +:10C85000F3D00A2C03D020460AB0BDE8F0870020B0 +:10C86000FAE710B50C46896B86B051B10C218DF8F2 +:10C870000010A18FADF80810A16B01916946FAF77D +:10C8800064FC00204FF6FF71A063E187A08706B02B +:10C8900010BD2DE9F0410D460746896B0020069E2C +:10C8A0001446002911D0012B0FD1324629463846B3 +:10C8B000FFF762FF002808D1002C06D03246294637 +:10C8C0003846BDE8F04100F038BFBDE8F0812DE901 +:10C8D000FC411446DDE9087C0E46DDE90A15521DCF +:10C8E000BCF800E092B2964502D20720BDE8FC8178 +:10C8F000ACF8002017222A70A5F80160A5F80330D3 +:10C900000522CDE900423B462A46FFF7DFFD002025 +:10C91000ECE770B50C4615464821204617F0E9FCB7 +:10C9200004F1080044F81C0F00204FF6FF71E0618D +:10C9300061842084A5841720E08494F82A0040F0C4 +:10C940000A0084F82A0070BD4FF6FF720A80014683 +:10C95000032007F097BC30B585B00C460546FFF7BD +:10C9600080FFA18E284629B101218DF8001069466B +:10C97000FAF7EBFB0020E0622063606305B030BD96 +:10C98000B0F84000704700005400002090F84620A6 +:10C99000920703D4408808800020F3E70620F1E7DF +:10C9A00090F846209207EDD5A0F84410EAE701463A +:10C9B000002009880A0700D5012011F0F00F01D0EE +:10C9C00040F00200CA0501D540F004008A0501D5F7 +:10C9D00040F008004A0501D540F010000905D1D506 +:10C9E00040F02000CEE700B5034690F84600C007AF +:10C9F00001D0062000BDA3F842101846FFF7D7FF6C +:10CA000010F03E0F05D093F8460040F0040083F884 +:10CA1000460013F8460F40F001001870002000BDDA +:10CA200090F84620520700D511B1B0F84200A9E7AE +:10CA30001720A7E710F8462F61F3C3020270A1E7A1 +:10CA40002DE9FF4F9BB00E00DDE92B34DDE929789D +:10CA5000289D24D02878C10703D000F03F00192872 +:10CA600001D9012100E000212046FFF7D9FFB042A3 +:10CA700015D32878410600F03F010CD41E290CD0B4 +:10CA8000218811F47F6F0AD13A8842B1A1F57F4223 +:10CA9000FF3A04D001E0122901D1000602D504209A +:10CAA0001FB0C5E5F9491D984FF0000A08718DF8CF +:10CAB00018A08DF83CA00FAA0A60ADF81CA0ADF834 +:10CAC00050A02978994601F03F02701F5B1C04F1C9 +:10CAD000180C4FF0060E4FF0040BCDF858C01F2A6B +:10CAE0007ED2DFE802F07D7D107D267DAC7DF47D79 +:10CAF000F37DF27DF17DF47DF07D7D7DEF7DEE7D3A +:10CB00007D7D7D7DED0094F84610B5F80100890724 +:10CB100001D5032E02D08DF818B022E34FF4006146 +:10CB2000ADF85010608003218DF83C10ADF8400046 +:10CB3000D8E2052EEFD1B5F801002083ADF81C0036 +:10CB4000B5F80310618308B1884201D901207FE163 +:10CB50000020A07220814FF6FF702084169801F00B +:10CB6000A0F8052089F800000220029083460AAB55 +:10CB70001D9A16991B9801F097F890BB9DF82E000E +:10CB8000012804D0022089F80100102003E00120D0 +:10CB900089F8010002200590002203A90BA805F0E6 +:10CBA000A8FCE8BB9DF80C00059981423DD13A886C +:10CBB000801CA2EB0B01814237DB02990220CDE9F8 +:10CBC00000010DF12A034A4641461B98FFF77EFCFF +:10CBD00002980BF1020B801C80B217AA03A901E096 +:10CBE000A0E228E002900BA805F083FC02999DF8D2 +:10CBF0000C00CDE9000117AB4A4641461B98FFF7F0 +:10CC000065FC9DF80C100AAB0BEB01001FFA80FBD2 +:10CC100002981D9A084480B2029016991B9800E071 +:10CC200003E001F041F80028B6D0BBF1020F02D0BA +:10CC3000A7F800B053E20A208DF818004FE2002157 +:10CC40000391072EFFF467AFB5F801002083ADF81C +:10CC50001C00B5F80320628300283FF477AF9042B0 +:10CC60003FF674AF0120A072B5F8050020810020C6 +:10CC7000A073E06900F052FD78B9E1690120887184 +:10CC8000E2694FF420519180E1698872E06942F6CF +:10CC900001010181E06900218173F01F20841E9849 +:10CCA000606207206084169800F0FBFF072089F877 +:10CCB00000000120049002900020ADF82A0028E036 +:10CCC0001DE2A3E13AE1EAE016E2AEE086E049E0E7 +:10CCD0000298012814D0E0698079012803D1BDF8B9 +:10CCE0002800ADF80E00049803ABCDE900B04A4629 +:10CCF00041461B98FFF7EAFB0498001D80B20490A0 +:10CD0000BDF82A00ADF80C00ADF80E00059880B211 +:10CD100002900AAB1D9A16991B9800F0C5FF28B91E +:10CD200002983988001D05908142D1D202980128CD +:10CD300081D0E0698079012805D0BDF82810A1F5DF +:10CD40007F40FF3803D1BDF82800ADF80E000498ED +:10CD500003ABCDE900B04A4641461B98FFF7B6FB4E +:10CD60000298BBE1072E02D0152E7FF4D4AEB5F8A1 +:10CD700001102183ADF81C10B5F80320628300294F +:10CD80003FF4E4AE91423FF6E1AE0121A1724FF0D3 +:10CD9000000BA4F808B084F80EB0052E07D0C0B27E +:10CDA000691DE26905F086FB00287FF444AF4FF669 +:10CDB000FF70208401A906AA14A8CDF800B081E86C +:10CDC00085032878214600F03F031D9A1B98FFF742 +:10CDD00095FB8246208BADF81C0080E10120032EDC +:10CDE000C3D14021ADF85010B5F801102183ADF842 +:10CDF0001C100AAAB8F1000F00D00023CDE90203ED +:10CE000004921D98CDF80480009038880022401EBE +:10CE100083B21B9800F0C8FF8DF8180090BB0B2060 +:10CE200089F80000BDF8280037E04FF0010C052E0E +:10CE30009BD18020ADF85000B5F801102183B5F8E2 +:10CE400003002084ADF81C10B0F5007F03D9072043 +:10CE50008DF8180085E140F47C4222840CA8B8F1DA +:10CE6000000F00D00023CDE90330CDE9018C1D98DF +:10CE700000903888401E83B21B9800F095FF8DF813 +:10CE8000180028B18328A8D10220BDE0540000205A +:10CE90000D2189F80010BDF83000401C1EE1032E62 +:10CEA00004D248067FF537AE002017E1B5F801102F +:10CEB000ADF81C102878400602D58DF83CE002E061 +:10CEC00007208DF83C004FF000080320CDE9020850 +:10CED0001E9BCDF810801D980193A6F1030B0090C6 +:10CEE0001FFA8BF342461B9800F034FD8DF81800B2 +:10CEF0008DF83C80297849060DD52088C00506D5D7 +:10CF0000208BBDF81C10884201D1C4F82480404613 +:10CF10008DF81880E2E0832801D14FF0020A4FF427 +:10CF20008070ADF85000BDF81C002083A4F820B03C +:10CF30001E986062032060841321CCE0052EFFF46C +:10CF4000EAADB5F80110ADF81C10A28F62B3A2F5DE +:10CF50007F43FE3B28D008228DF83C204FF0000B89 +:10CF60000523CDE9023BDDF878C0CDF810B01D9A5D +:10CF700080B2CDF804C040F400430092B5F803201D +:10CF80001B9800F0E7FC8DF83CB04FF400718DF871 +:10CF90001800ADF85010832810D0F8B1A18FA1F57A +:10CFA0007F40FE3807D0DCE00B228DF83C204FF6A6 +:10CFB000FE72A287D2E7A4F83CB0D2E000942B46E0 +:10CFC00031461E9A1B98FFF780FB8DF8180008B1B8 +:10CFD00083284BD1BDF81C00208355E700942B46D5 +:10CFE00031461E9A1B98FFF770FB8DF81800E8BBBE +:10CFF000E18FA06B0844811D8DE8820343888288FD +:10D0000001881B98FFF763FC824668E095F8018071 +:10D01000022E70D15FEA080002D0B8F1010F6AD188 +:10D0200009208DF83C0007A800908DF84080434609 +:10D03000002221461B98FFF72CFC8DF842004FF090 +:10D04000000B8DF843B050B9B8F1010F12D0B8F110 +:10D05000000F04D1A18FA1F57F40FF380AD0A08F27 +:10D0600040B18DF83CB04FF4806000E037E0ADF89F +:10D0700050000DE00FA91B98FAF767F882468DF86B +:10D080003CB04FF48060ADF85000BAF1020F06D00A +:10D09000FC480068C07928B18DF8180027E0A4F892 +:10D0A000188044E0BAF1000F03D081208DF81800F9 +:10D0B0003DE007A800904346012221461B98FFF758 +:10D0C000E8FB8DF8180021461B98FFF7CAFB9DF876 +:10D0D000180020B9192189F80010012038809DF826 +:10D0E0003C0020B10FA91B98FAF72FF88246BAF13D +:10D0F000000F33D01BE018E08DF818E031E0207805 +:10D10000000712D5012E10D10A208DF83C00E088CE +:10D11000ADF8400003201B9907F0B4F80820ADF8E3 +:10D120005000C1E648067FF5F6AC4FF0040A2088AF +:10D13000BDF8501008432080BDF8500080050BD585 +:10D14000A18FA1F57F40FE3806D11E98E062289895 +:10D150002063A6864FF0030A5046A1E49DF818000C +:10D1600078B1012089F80000297889F80110BDF80C +:10D170001C10A9F802109DF8181089F80410052059 +:10D1800038802088BDF8501088432080E4E72DE9DE +:10D19000FF4F8846087895B0012181404FF2090081 +:10D1A000249C0140ADF820102088DDF88890A0F57F +:10D1B0007F424FF0000AFF3A06D039B1000705D58B +:10D1C000012019B0BDE8F08F0820FAE7239E4FF048 +:10D1D000000B0EA886F800B018995D460988ADF8D6 +:10D1E0003410A8498DF81CB0179A0A718DF838B020 +:10D1F000086098F8000001283BD0022809D00328D5 +:10D200006FD1307820F03F001D303070B8F8040046 +:10D21000E08098F800100320022904D1317821F031 +:10D220003F011B31317094F84610090759D505AB01 +:10D23000B9F1000F13D0002102AA82E80B000720E9 +:10D24000CDE90009BDF83400B8F80410C01E83B25F +:10D250000022159800F0A8FD0028D1D101E0F11CB2 +:10D26000EAE7B8F80400A6F80100BDF81400C01CF5 +:10D2700004E198F805108DF81C1098F804000128B6 +:10D2800006D04FF4007A02282CD00328B8D16CE1E4 +:10D290002188B8F8080011F40061ADF8201020D002 +:10D2A00017281CD3B4F84010814218D3B4F84410A6 +:10D2B000172901D3814212D1317821F03F01C91CD5 +:10D2C0003170A6F801000321ADF83410A4F8440031 +:10D2D00094F8460020F0020084F8460065E1052538 +:10D2E0007EE177E1208808F1080700F4FE60ADF8E0 +:10D2F000200010F0F00F1BD010F0C00F03D03888C2 +:10D30000228B9042EBD199B9B878C00710D0B96898 +:10D310000720CDE902B1CDF804B00090CDF810B0EF +:10D32000FB88BA883988159800F014FB0028D6D1FC +:10D330002398BDF82010401C80294ED006DC10290F +:10D340000DD020290BD0402987D124E0B1F5807F72 +:10D350006ED051457ED0B1F5806F97D1DEE0C80622 +:10D3600001D5082000E0102082460DA907AA05205B +:10D37000CDE902218DF83800ADF83CB0CDE9049636 +:10D3800008A93888CDE9000153460722214615989F +:10D39000FFF7B4F8A8E09DF81C2001214FF00A0A1D +:10D3A000002A9BD105ABB9F1000F00D00020CDE9D8 +:10D3B00002100720CDE90009BDF834000493401E97 +:10D3C00083B2218B0022159800F0EEFC8DF81C0032 +:10D3D0000B203070BDF8140020E09DF81C200121C6 +:10D3E0004FF00C0A002A22D113ABB9F1000F00D084 +:10D3F0000020CDE902100720CDE900090493BDF813 +:10D400003400228C401E83B2218B159800F0CCFC96 +:10D410008DF81C000D203070BDF84C00401CADF89C +:10D42000340005208DF83800208BADF83C00BCE0BE +:10D430003888218B88427FF452AF9DF81C004FF052 +:10D44000120A00281CD1606AA8B1B878C0073FF45E +:10D4500046AF00E018E0BA680720CDE902B2CDF887 +:10D4600004B00090CDF810B0FB88BA88159800F091 +:10D4700071FA8DF81C00132030700120ADF83400D3 +:10D4800093E00000540000203988208B8142D2D1E3 +:10D490009DF81C004FF0160A0028A06B08D0E0B3DE +:10D4A0004FF6FF7000215F46ADF808B0019027E00D +:10D4B00068B1B978C907BED1E18F0DAB0844821DB0 +:10D4C00003968DE80C0243888288018809E0B878C9 +:10D4D000C007BCD0BA680DAB03968DE80C02BB88C0 +:10D4E000FA881598FFF7F3F905005ED0072D72D082 +:10D4F00076E0019005AA02A92046FFF729F9014626 +:10D50000E28FBDF80800824201D00029F1D0E08FFF +:10D51000A16B084407800198E08746E09DF81C0055 +:10D520004FF0180A40B1208BC8B1388820832146BB +:10D530001598FFF796F938E004F118000090237E63 +:10D54000012221461598FFF7A4F98DF81C00002848 +:10D55000EDD1192030700120ADF83400E7E7052542 +:10D5600021461598FFF77DF93AE0208800F4007015 +:10D57000ADF8200050452DD1A08FA0F57F41FE3998 +:10D5800001D006252CE0D8F808004FF0160A48B163 +:10D59000A063B8F80C10A1874FF6FF71E187A0F8DF +:10D5A00000B002E04FF6FF70A087BDF8200030F415 +:10D5B0007F611AD0782300220320159906F0B8FD68 +:10D5C00098F8000020712088BDF8201008432080C2 +:10D5D0000EE000E007252088BDF820108843208059 +:10D5E000208810F47F6F1CD03AE02188814321808D +:10D5F0009DF8380020B10EA91598F9F7A6FD05464B +:10D600009DF81C000028EBD086F801A001203070A6 +:10D61000208B70809DF81C0030710520ADF834001F +:10D62000DEE7A18EE1B118980DAB0088ADF83400AB +:10D630002398CDE90304CDE90139206B0090E36A1A +:10D64000179A1598FFF7FCF9054601208DF8380068 +:10D650000EA91598F9F779FD00B10546A4F834B084 +:10D6600094F8460040070AD52046FFF7A0F910F0CD +:10D670003E0F04D114F8460F20F0040020701898D3 +:10D68000BDF83410018028469BE500B585B003281D +:10D6900006D102208DF8000088B26946F9F755FDE1 +:10D6A00005B000BD10B5384C0B782268012B02D0B4 +:10D6B000022B2AD111E013780BB1052B01D10423E1 +:10D6C000137023688A889A802268CB88D380226866 +:10D6D0000B891381498951810DE08B8893802268E1 +:10D6E000CB88D38022680B8913814B8953818B8926 +:10D6F0009381096911612168F9F727FD22680021EA +:10D700000228117003D0002800D0812010BD832092 +:10D7100010BD806B002800D001207047817801295E +:10D7200009D10088B0F5205F03D042F6010188429C +:10D7300001D10020704707207047F0B587B0002462 +:10D7400015460E460746ADF8144010E006980188CD +:10D750002980811DCDE902410721019404940091A3 +:10D76000838842880188384600F0F4F830B906AA68 +:10D7700005A93046FEF7ECFF0028E7D00A2800D1C3 +:10D78000002007B0F0BD00005400002010B58B78D9 +:10D7900083B102789A4205D10B885BB102E08B79A4 +:10D7A000091D4BB18B789A42F9D1B0F801300C8841 +:10D7B000A342F4D1002010BD812010BD072826D03F +:10D7C00012B1012A27D103E0497801F0070102E0F4 +:10D7D0004978C1F3C20105291DD2DFE801F0031821 +:10D7E000080C12000AB10320704702207047042879 +:10D7F0000DD250B10DE0052809D2801E022808D3B1 +:10D8000003E0062803D0032803D00520704700203A +:10D8100070470F20704781207047C0B282060BD43A +:10D82000000607D5FE48807A4143C01D01EBD000B9 +:10D8300080B27047084670470020704770B5138863 +:10D840000B800B781C0625D5F54CA47A844204D8AD +:10D8500043F010000870002070BD956800F00706C6 +:10D8600005EBD0052D78F54065F304130B701378A4 +:10D87000D17803F0030341EA032140F20123B1FB15 +:10D88000F3F503FB15119268E41D00FB012000EB8A +:10D89000D40070BD906870BD37B51446BDF8041053 +:10D8A00011809DF804100A061ED5C1F30013DC494F +:10D8B000A568897A814208D8FE2811D1C91DC908F6 +:10D8C0005A42284616F0EBFC0AE005EBD00100F0C6 +:10D8D0000702012508789540A84393401843087033 +:10D8E000207820F0100020703EBD2DE9F041074661 +:10D8F000C81C0E4620F00300B04202D08620BDE8CE +:10D90000F081C74D002034462E60AF802881AA7276 +:10D91000E8801AE0E988491CE980810614D4E1789E +:10D9200000F0030041EA002040F20121B0FBF1F2D7 +:10D9300001FB12012068FFF770FF2989084480B2BB +:10D940002881381A3044A0600C3420784107E1D493 +:10D950000020D4E72DE9FF4F89B01646DDE9168A8D +:10D960000F46994623F44045084600F00DFB04009D +:10D970000FD0099802F0E2FF0290207800060AD545 +:10D98000A748817A0298814205D887200DB0BDE86A +:10D99000F08F0120FAE7224601A90298FFF74EFF17 +:10D9A000834600208DF80C004046B8F1070F1AD0CE +:10D9B00001222146FFF702FF0028E7D12078400628 +:10D9C00011D502208DF80C00ADF81070BDF80400E0 +:10D9D000ADF81200ADF814601898ADF81650CDF8F7 +:10D9E0001CA0ADF818005FEA094004D500252E46BA +:10D9F000A84601270CE02178E07801F0030140EA15 +:10DA0000012040F20121B0FBF1F2804601FB1287B8 +:10DA10005FEA494009D5B84507D1A178207901F0DE +:10DA2000030140EA0120B04201D3BE4201D90720E0 +:10DA3000ACE7A8191FFA80F9B94501D90D20A5E76F +:10DA40009DF80C0028B103A90998F9F77CFB002880 +:10DA50009CD1B84507D1A0784FEA192161F30100A4 +:10DA6000A07084F804901A9800B10580199850EAC3 +:10DA70000A0027D0199830B10BEB06002A461999F5 +:10DA800016F096FB0EE00BEB06085746189E099819 +:10DA900003F0C0F82B46F61DB5B239464246009554 +:10DAA00002F0ABFC224601A90298FFF7C7FE9DF8E1 +:10DAB0000400224620F010008DF80400DDE901107A +:10DAC000FFF7EAFE002061E72DE9FF4FDFF85091F4 +:10DAD00082461746B9F80610D9F8000001EB41015B +:10DAE00000EB810440F20120B2FBF0F185B000FBB5 +:10DAF00011764D46DDF84C8031460698FFF78DFED5 +:10DB000029682A898B46611A0C3101441144AB887B +:10DB100089B28B4202D8842009B038E70699CDB289 +:10DB2000290603D5A90601D50620F5E7B9F806C0F0 +:10DB30000CF1010C1FFA8CFCA9F806C0149909B16C +:10DB4000A1F800C0A90602D5C4F8088007E0104477 +:10DB500080B2A9F80800191A01EB0B00A060224658 +:10DB6000FE200699FFF798FEE77026712078390AA3 +:10DB700061F30100320AA17840F0040062F3010170 +:10DB8000A17020709AF802006071BAF80000E0807D +:10DB900000262673280602D599F80A7000E00127AE +:10DBA000A80601D54FF000084D4600244FF00709A4 +:10DBB0000FE0CDE902680196CDF800900496E9885F +:10DBC0002046129B089AFFF7C5FE0028A4D1641CCA +:10DBD000E4B2BC42EDD300209EE72DE9F047804639 +:10DBE00000F0D2F9070005D0002644460C4D40F263 +:10DBF000012919E00120BDE8F087204600F0C4F9B2 +:10DC00000278C17802F0030241EA0222B2FBF9F382 +:10DC100009FB13210068FFF700FE304486B201E0E3 +:10DC2000E8050020641CA4B2E988601E8142E4DC9F +:10DC3000A8F10100E8802889801B28810020387025 +:10DC4000D9E710B5144631B1491E218002F076FEA5 +:10DC5000A070002010BD012010BD10B5D2490446AF +:10DC60000088CA88904201D30A2010BD096800EBE1 +:10DC7000400001EB80025079A072D0882081917819 +:10DC8000107901F0030140EA0120A081A078E11C95 +:10DC9000FFF7D4FD20612088401C2080E080002018 +:10DCA00010BD0121018270472DE9FF4F85B04FF66D +:10DCB000FF788246A3F8008048681F460D468078AA +:10DCC0008DF8060048680088ADF8040000208DF843 +:10DCD0000A00088A0C88A04200D304462C8241E046 +:10DCE000288A401C2882701D6968FFF74FFDB8BB69 +:10DCF0003988414501D1601E38806888A04236D3FA +:10DD0000B178307901F0030140EA012901A9701DC1 +:10DD1000FFF73CFD20BB298941452CD0002231462C +:10DD20000798FFF74BFDD8B92989494518D1E9680B +:10DD30000391B5F80AC0D6F808B05046CDF800C037 +:10DD400002F068FFDDF800C05A460CF1070C1FFA1C +:10DD50008CFC4B460399CDF800C002F018FB50B183 +:10DD6000641CA4B2204600F00FF90600B8D1641E6E +:10DD70002C820A20D0E67C807079B871F088B88057 +:10DD80003178F07801F0030140EA01207881A7F8AA +:10DD90000C90504602F0D2FD324607F10801FFF721 +:10DDA0004DFD38610020B7E62DE9FF4F87B0814671 +:10DDB0001C469246DDF860B0DDF85480089800F00B +:10DDC000E3F805000CD0484602F0B8FD29780906B2 +:10DDD00008D57549897A814204D887200BB0D6E5E9 +:10DDE0000120FBE7CAF309062A4601A9FFF726FD31 +:10DDF0000746149807281CD000222946FFF7DEFCAE +:10DE00000028EBD12878400613D501208DF80800B2 +:10DE10000898ADF80C00BDF80400ADF80E00ADF8A0 +:10DE20001060ADF8124002A94846F9F78CF90028B5 +:10DE3000D4D12978E87801F0030140EA0121AA78D9 +:10DE4000287902F0030240EA0220564507D0B1F5D6 +:10DE5000007F04D9611E814201DD0B20BEE78642AE +:10DE600001D90720BAE7801B85B2A54200D9254613 +:10DE7000BBF1000F01D0ABF80050179818B1B919D9 +:10DE80002A4616F095F9B8F1000F0DD03E444846E9 +:10DE90004446169F02F0D0FE2146FF1DBCB232461A +:10DEA0002B46009402F0DDFA002097E72DE9F041BF +:10DEB00007461D461646084600F066F804000BD0DB +:10DEC000384602F03BFD2178090607D53649897AA4 +:10DED000814203D8872012E5012010E52246314611 +:10DEE000FFF7ACFC65B12178E07801F0030140EA6E +:10DEF0000120B0F5007F01D8012000E0002028704B +:10DF00000020FCE42DE9F04107461D461646084670 +:10DF100000F03AF804000BD0384602F00FFD2178EB +:10DF2000090607D52049897A814203D88720E6E48B +:10DF30000120E4E422463146FFF7AEFCFF2D14D069 +:10DF40002178E07801F0030240EA022040F2012249 +:10DF5000B0FBF2F302FB130015B900F2012080B20E +:10DF6000E070000A60F3010121700020C7E410B5E1 +:10DF70000C4600F009F828B1C18821804079A070D2 +:10DF8000002010BD012010BD0749CA88824209D374 +:10DF900040B1096800EB40006FF00B0202EB80001B +:10DFA0000844704700207047E805002070B503461C +:10DFB000002002466FF02F050EE09C5CA4F13006B5 +:10DFC0000A2E02D34FF0FF3070BD00EB800005EB4E +:10DFD0004000521C2044D2B28A42EED370BD30B50C +:10DFE0000A240AE0B0FBF4F304FB13008D18303070 +:10DFF00005F8010C521E1846D2B2002AF2D130BDEB +:10E0000030B500234FF6FF7510E0040A44EA002003 +:10E0100084B2C85C6040C0F30314604005EA003479 +:10E020004440E0B25B1C84EA40109BB29342ECD3C4 +:10E0300030BD000010B582B0694601F0D1FD002866 +:10E0400018BFFFDF9DF80000002448B1019890F848 +:10E05000DD0028B1019880F8DD4001980AF0AFF9A1 +:10E06000F8488068A0F8D24002B010BD2DE9F04712 +:10E0700004460D46062002F043FC0646072002F047 +:10E080003FFC304400F0FF08002718EB050618BFDE +:10E090004FF000091DD02088401C80B22080B04283 +:10E0A00028BFA4F800902588454501D3B54209D37F +:10E0B0000621284602F07CFC20B90721284602F000 +:10E0C00077FC10B10020BDE8F087781CC7B2BE42D3 +:10E0D000E1D84FF6FF7020801220BDE8F08770B5C0 +:10E0E00082B007F073FB0DF0AFF9D74C4FF6FF7617 +:10E0F00000256683A683D5A12570D1E90001CDE96D +:10E10000000165706946A01C16F008FAA11C601C8D +:10E1100014F04CF825721B2060814FF4A471A1818A +:10E12000E08121820321A1740422E274A082E082B2 +:10E13000A4F13E00218305704680C6480570A4F115 +:10E1400010000570468002B070BDF8B5BD4D174691 +:10E150000E466860297007F0B3FA4FF6FF70ADF80D +:10E16000000000216846FFF781FFA0B90621BDF835 +:10E17000000002F02FFC04460721BDF8000002F069 +:10E1800029FC002C1CBF0028FFDF00216846FFF798 +:10E190006DFF0028EAD0FFF7A2FF287812F07CF884 +:10E1A0000FF0A0FC2978686813F013FF28780CF0B2 +:10E1B000ABFB30460AF00FF807F020FC29786868BE +:10E1C0000BF048FA3946287814F0ADFDBDE8F84068 +:10E1D0000DF03AB910B50124002A1CBF002010BD73 +:10E1E000002908BF022105D0012918BF002401D051 +:10E1F000204610BD0EF088FEFAE72DE9F04F8BB0F7 +:10E20000040008BFFFDF02218F4E06F11C00FFF75C +:10E210002DFF002818BFFFDFB6F81CA0062002F073 +:10E220006FFB0546072002F06BFB284400F0FF0857 +:10E2300008F1010000F0FF094FF0000BB78B4745D4 +:10E2400025D120460FF022F8002840F0CE8030780B +:10E25000002800F0CE8084F801B014202070C4F8AB +:10E2600004B0C4F808B0C4F80CB0C4F810B0C4F8D6 +:10E2700014B0C4F818B0C4F81CB00220C4F820B020 +:10E28000207186F800B00BB00120BDE8F08F4F453B +:10E2900020D1204607F04CFB00287DD007F02AFF54 +:10E2A000002859D02078172856D12079002853D03B +:10E2B000E088072102F07CFB050008BFFFDF28880B +:10E2C00007F017FAE088072102F084FB002818BF46 +:10E2D000FFDF8AE004A9384601F082FC00285BD108 +:10E2E0009DF8100048B107F07EFBB84254D021469B +:10E2F00038460BF0B8F880B377E00FF05AF8B84220 +:10E3000077D02146384613F085FD00286DD1059859 +:10E3100000F1580590F8D00018B9E87E08B1012046 +:10E3200000E00020079095F8370000281CBF95F802 +:10E33000380010F0020F1CD084F801B001202070CA +:10E3400084F804B0E78095F839002072688F608106 +:10E35000A88FA08185F837B047E0FFE7059800F166 +:10E36000580590F80C010028DBD1E87E0028D8D0B1 +:10E37000D5E7384602F060FC0290002808BFFFDFB6 +:10E38000029801F06FFE50B184F801B00F212170A6 +:10E39000E7802081012000E02BE0207125E0384655 +:10E3A00002F038FC0290002808BFFFDF079800B396 +:10E3B000029801F0AEFEE0B19DF8100038B9059862 +:10E3C000D0F8F8004188B94208BF80F800B038465C +:10E3D00007F08FF984F801B00C20207084F804B0A5 +:10E3E000E780287F207285F81BB00BB00120BDE8C4 +:10E3F000F08F022106F11C00FFF738FE18B9B08B30 +:10E4000050457FF41BAF0BB02046BDE8F04F14F031 +:10E41000D0BC10B512F08AFC042803D012F086FCA0 +:10E42000052802D10FF078FD28B90AF0A9F920B12A +:10E4300007F08AFC08B10C2010BD0DF051F8002047 +:10E4400010BD00005C00002032060020FFFFFFFF2F +:10E450001F0000006800002010B504460078002866 +:10E460001EBF0128122010BD12F060FC042806D047 +:10E4700012F05CFC052802D00AF082F928B10DF0F8 +:10E480007EF900281CBF0C2010BD2078002816BF84 +:10E4900002280020012004F11703E21D611CBDE8E1 +:10E4A00010400DF075B810B50446007800281EBF66 +:10E4B0000128122010BD12F039FC042803D012F0FC +:10E4C00035FC052802D10FF027FD28B90AF058F9CC +:10E4D00020B107F039FC08B10C2010BD20780028CD +:10E4E00016BF022800200120611C0CF0BFFF00288D +:10E4F00014BF0020072010BD10B50DF043F900280F +:10E5000014BF0020302010BD10B5044612F00EFCE0 +:10E51000042806D012F00AFC052802D00AF030F9CF +:10E5200008B10C2010BD20460DF026F9002010BDCA +:10E5300010B512F0FBFB042806D012F0F7FB0528FB +:10E5400002D00AF01DF928B10DF019F900281CBFFE +:10E550000C2010BD0DF075F8002010BDFF2181705A +:10E560004FF6FF718180FE4949680A7882718A8876 +:10E57000028149884181012141700020704710B516 +:10E58000002482B012F1080F16D00CDC12F1280F13 +:10E5900018BF12F1140F0FD012F1100F18BF12F1A3 +:10E5A0000C0F09D00EE012F1040F18BF002A03D09F +:10E5B000032A18BF042A05D1012807D0022809D050 +:10E5C00003280BD0122402B0204610BD104607F0DD +:10E5D0008CFDF8E710460FF03AFAF4E708461446C7 +:10E5E000694601F0FDFA002818BF0224EBD19DF81E +:10E5F0000000019880F857400024E4E710B5134666 +:10E6000001220DF0A6FF002010BD10B5044612F047 +:10E610008DFB052804BF0C2010BD204611F02AFEFA +:10E62000002010BD10B5044612F080FB042806D06F +:10E6300012F07CFB052802D00AF0A2F808B10C20E9 +:10E6400010BD2146002007F0C2F8002010BD10B513 +:10E65000044611F0B9FE50B10AF085F838B12078BF +:10E6600009F0DDFD20780FF090FC002010BD0C209B +:10E6700010BD10B5044612F059FB042806D012F064 +:10E6800055FB052802D00AF07BF808B10C2010BD1C +:10E690002146012007F09BF8002010BD38B5044644 +:10E6A0004FF6FF70ADF80000A079E179884213D0F1 +:10E6B00021791F299CBF61791F290DD8002211469D +:10E6C00014F030FF40B90022E079114614F02AFF1F +:10E6D00010B9207A072801D9122038BD0AF050F865 +:10E6E00060B912F023FB48B900216846FFF7BEFC71 +:10E6F00020B1204606F031F8002038BD0C2038BD8E +:10E7000070B504468078002582B01A2825D00EDC2A +:10E71000162844D2DFE800F04343434343214343F8 +:10E7200043434343434343434343432121212A2853 +:10E7300035D00BDCA0F11E000C2830D2DFE800F051 +:10E740002F2F2F2F2F2F2F2F2F2F2F0D3A38042819 +:10E7500025D2DFE800F0240224022088B0F5706F93 +:10E760001DD20126694601F03BFA00281EBF022097 +:10E7700002B070BD9DF80000002801980BBF00F1A9 +:10E78000F40100F5B87100F1F50300F271130246CF +:10E7900012D192F8D00092F8732052B903E002B07F +:10E7A0004FF0120070BD002818BF042801D008786F +:10E7B00068B102B00C2070BD92F80C0192F8732081 +:10E7C000002AF6D1002818BF0428F0D1F1E70E7016 +:10E7D000A07818709DF8000048B1019890F8DD000D +:10E7E00028B1019880F8DD50019809F0E8FD02B0E9 +:10E7F000002070BDF0B583B00C46694601F0F0F919 +:10E8000028B1204615F074FE03B00220F0BD019837 +:10E81000002700F1580500F1080600BF85F8407098 +:10E820003146204615F07AFE95F840000028F5D1D3 +:10E8300003B0F0BD2DE9F0410D4604460189808802 +:10E8400000230DF0BCFF696A814228BFBDE8F0815A +:10E85000401A401C4108A0884FF0000C401A80B2BA +:10E86000A08022896FF00E07511A8AB2228195F892 +:10E870005460618816F00C0F6FF00D0328D0B0F5CE +:10E88000747F38BF604606D35038C61700EB9660D9 +:10E8900003EBA01080B2814238BF0846608095F833 +:10E8A0005510E08811F00C0F1BD0B2F5747F09D31E +:10E8B000A2F15001CA1701EB926103EBA11100BF55 +:10E8C0001FFA81FC604528BF6046E080BDE8F0810A +:10E8D000022E1ABF03EBD00080B207EB9000DAD112 +:10E8E000D8E702291ABF03EBD2011FFA81FC07EB1C +:10E8F0009201E7D1E4E7F0B587B00C46054604A9DC +:10E9000001F06EF900281CBF07B0F0BD9DF81000A3 +:10E91000002814BF002201220599B1F84A30FB2BD0 +:10E9200028BFFB23B1F84CC0BCF1FB0F28BF4FF050 +:10E93000FB0C0C4FD7E90006BF68009001960297C8 +:10E94000ADF80230ADF806C06846FFF773FF65808A +:10E95000BDF80400E080BDF80800608104E000001C +:10E960005C00002040470200BDF80200A080BDF816 +:10E970000600208107B00020F0BD2DE9F04F89B0DE +:10E9800004460088694601F02BF95FEA00081CBFC5 +:10E9900009B0BDE8F08FB4F806C02289ACF11B01C4 +:10E9A0001220E12924BF09B0BDE8F08FB2F5A47FA1 +:10E9B0003CBF09B0BDE8F08F44F29025AA4284BF65 +:10E9C00009B0BDE8F08F00276388A188A3F11B067A +:10E9D000E12E24BF09B0BDE8F08FB1F5A47F2EBFB2 +:10E9E0008D4209B0BDE8F08F1120BCF1FB0F99BF3B +:10E9F00040F64806B24209B0BDE8F08FFB2B92BF4B +:10EA0000B14209B0BDE8F08F208806A901F0E8F80E +:10EA1000002818BFFFDF35D19DF8180000280CBF73 +:10EA2000012200220799B1F84A00FB2828BFFB20E9 +:10EA3000B1F84C30FB2B28BFFB23DFF858B7DBF8CD +:10EA400000C0DBF804A0DBF808B0CDF808C0CDF8B2 +:10EA50000CA0CDF810B0ADF80A00ADF80E3002A849 +:10EA6000FFF7E8FEBDF80C0060F31F45BDF810008D +:10EA700060F31F49BDF80A0060F30F05BDF80E00F2 +:10EA800060F30F0962881FFA89F1092091423CBFA7 +:10EA900009B0BDE8F08FA9B2E28891423CBF09B04D +:10EAA000BDE8F08F4FEA1941A288238901EB154197 +:10EAB0001A4491423CBF09B0BDE8F08F9DF80000B8 +:10EAC0004FF001090028019808D000F5CD7580F8B5 +:10EAD0009B91019890F8DE0148B307E000F582753C +:10EAE00080F80591019890F8280110B14FF03A088C +:10EAF00018E0E08868806088E8802089A880A08885 +:10EB00002881012228460199FFF794FEA888B04287 +:10EB100028BF40F64800A8802889B0421DD228812D +:10EB200085F800906F7009B04046BDE8F08FE0882E +:10EB300068806088E8802089A880A08828810022D9 +:10EB400028460199FFF776FEA888B04228BF40F614 +:10EB50004800A8802889B042E1D340F64800DEE7AB +:10EB60000BE710B5044612F0E1F8042806D012F0C5 +:10EB7000DDF8052802D009F003FE28B10CF0FFFDF6 +:10EB800000281CBF0C2010BD2078002816BF0228CA +:10EB900000200120E279611C0CF075FF002814BFF1 +:10EBA0000020022010BD817831F0070207BFC27833 +:10EBB00032F007031220704711F0040F0EBF12F05D +:10EBC000040F1120704701F023B810B504460178F6 +:10EBD000122084B0012918BF002904D002291EBFC9 +:10EBE000032904B010BD6178002918BF012904D0A1 +:10EBF00002291EBF032904B010BDE17B21B9A17811 +:10EC000001291CBF04B010BDA17831F005021CBF62 +:10EC100004B010BD11F0050F04BF04B010BD11F019 +:10EC2000040F1EBF112004B010BDE178E388628993 +:10EC300000291EBF012904B010BD042B2EBF042AD9 +:10EC400004B010BDA17B002904BF04B010BD07298A +:10EC500084BF04B010BD12F069F8042837D012F058 +:10EC600065F8052833D0A0788DF80800A0788DF8D5 +:10EC7000000060788DF8040020788DF80300A07BF8 +:10EC80008DF80500E07B002818BF01208DF80600F4 +:10EC9000A07810F0010F10D0E078012808BF022002 +:10ECA00003D000280CBF012000208DF80100E0886F +:10ECB000ADF80A006089ADF80C0002A811F091FBD4 +:10ECC000002804BF68460FF065F904B010BD04B019 +:10ECD0000C2010BD10B5044602781220012A0FD076 +:10ECE000002A18BF10BD012A26D012F01FF80528EF +:10ECF00004D011F0F6F9002808BF10BD0C2010BD9B +:10ED00006178002918BF012906D0022918BF10BD5B +:10ED1000A188002908BF10BD6388002B1CBFA188F3 +:10ED20000029E0D003EB83035B0001EB8101B3EB2F +:10ED3000012F28BF10BDD6E70FF01DF8002804BF33 +:10ED4000122010BD0FF02CF800200FF0D3F800288F +:10ED500018BF10BD60780FF0B1F8002818BF10BDC3 +:10ED6000A1886088BDE8104011F064BB002100F06C +:10ED7000B1BF017811F0010F02D0406813F0ECBF71 +:10ED800013F0B9BF2DE9F04F8FB00D460246AFF634 +:10ED90004411D1E90001CDE90B011146284600F0EC +:10EDA00099FF00281CBF0FB0BDE8F08F11F0BEFF27 +:10EDB00004280CD011F0BAFF052808D0F64F387897 +:10EDC00028B90EF0F6FAA0F57F41FF3903D00FB055 +:10EDD0000C20BDE8F08FF1480890F1480990F14807 +:10EDE0000A9008AA06210DA801F0B0FD040002BF98 +:10EDF00009200FB0BDE8F08F03210DF052F9B98A58 +:10EE0000A4F84A10FA8AA4F84C20F87C0090BB7C45 +:10EE1000208801F088FE002818BFFFDF208806F058 +:10EE200067FC268804F10E094FF0000B4FF00A0A28 +:10EE30000421484604F04DFF48460DF001FB062032 +:10EE400001F05EFD80461CE005A9062001F039FDB9 +:10EE500005A801F014FD5FEA000B10D1BDF8180001 +:10EE6000B04206D00798042249460E3015F074F9D6 +:10EE700070B105A801F003FD5FEA000BEED0A8F128 +:10EE80000108B8F1000F07DDBBF1000FDCD007E08F +:10EE900048460DF0DEFAF2E7BBF1000F08BFFFDFD6 +:10EEA000D9F800000CF07AFFBAF1010A01D000286D +:10EEB000BED0BDA004F1120600680190032101A894 +:10EEC00004F0DEFE002001A90A5C3254401CC0B2EE +:10EED0000328F9D3A88B6080688CA080288DE080FF +:10EEE000687A10F0010F18BF01217CD0388B0A46D8 +:10EEF00011F009FB0146A062204611F030FB4FF0F3 +:10EF0000000884F85E8084F85F80A878002816BF27 +:10EF10000228002001206076D5F80300C4F81A000A +:10EF2000B5F80700E0830BA904F1080015F0F6FA24 +:10EF30004FF0010984F80091B4F84C0004F5827692 +:10EF40004A46FB2828BFFB207989814238BF084602 +:10EF500094F855104FF4747A11F00C0F1CBF0AEBA3 +:10EF600080111FFA81FC72D0B989614538BF8C4687 +:10EF7000B4F84A10FB2928BFFB21FB898B4238BF1C +:10EF8000194694F854B01BF00C0F1CBF0AEB811308 +:10EF90009BB265D03F8A9F4238BF3B461B2918BFB2 +:10EFA000B3F5A47F65D0F080A6F808C07180B38067 +:10EFB00021463046FFF73EFCB08840F648018842C3 +:10EFC00028BF40F64800B0803089884228BF40F60C +:10EFD0004800308186F800908DF800800121684655 +:10EFE00004F04EFE00E02BE09DF8000000F0070169 +:10EFF000C0F3C1021144C0F3401008448DF8000072 +:10F00000401D207609283CBF08302076002120468C +:10F010000DF047F868780EF0B9FEA9782878EA1C58 +:10F020000EF087FE002808BF122650D00EF0B8FE62 +:10F03000A9782878EA1C0EF01BFF06001FD046E0D6 +:10F0400010F0020F14BF022100214FE7FFE7022951 +:10F0500007BF81003C31C10070311FFA81FC83E79A +:10F06000BBF1020F07BF8B003C33CB0070339BB268 +:10F0700090E71B2818BFBCF5A47F94D1ACE7012012 +:10F080000EF04CFE060022D1214603200EF028FF90 +:10F0900006001CD1687A8DF8000010F0010F05D031 +:10F0A0006889ADF80200288AADF80400684611F0BE +:10F0B00098F9064695F83A00002818BF01200EF08E +:10F0C00033FE26B9204611F026F9060009D0208823 +:10F0D00006F00FFB2088062101F07CFC002818BFF9 +:10F0E000FFDF30460FB0BDE8F08F0146002049E653 +:10F0F00038B5294C207870B911F018FE052805D0D4 +:10F100000EF057F9A0F57F41FF3904D0684611F0A1 +:10F11000CCF910B113E00C2038BD0098008806F03F +:10F12000E8FA00980621008801F054FC002818BF76 +:10F13000FFDF012020701D480078FCF727FE00202B +:10F1400038BD70B4B0F802C08188C3880289448990 +:10F150008089ACF1060640F67B45AE423CBF8E1F6F +:10F16000AE4214D28C4598BFB3F5FA7F3EBFA2F1F0 +:10F170000A0C0F4D15EB0C0509D25B1C5943B1EB82 +:10F18000820F04DA84429EBF002070BC704730209A +:10F1900070BC70474047020032060020F405002092 +:10F1A0006800002022060020112233005C000020AD +:10F1B00089F3FFFF2DE9F047B0F802C004468188CB +:10F1C000C388028947898689ACF1060940F67B48E5 +:10F1D00030200025C1453ABFA1F10609C145BDE86F +:10F1E000F0878C4598BFB3F5FA7F3DBFA2F10A0CBA +:10F1F000DFF8B48418EB0C08BDE8F0875B1C5943BA +:10F20000B1EB820FA8BFBDE8F087B74288BFBDE869 +:10F21000F0872088062101F0CBFB68B190F8D01070 +:10F2200090F8732042B9002918BF042904D0D0F8FF +:10F23000F8100A781AB106E00220BDE8F087D0F88D +:10F240004421127812B13A20BDE8F08705228A7174 +:10F25000D0F8F8100D81D0F8F820A1885181D0F8AD +:10F26000F820E1889181D0F8F8202189D181D0F867 +:10F27000F8100A894B899A429EBF8A79082A9A42D5 +:10F2800024BF1220BDE8F08722884A80D0F8F80019 +:10F29000022101700020BDE8F087F0B583B005467B +:10F2A0000DF0F2F8002802BF122003B0F0BD0026D6 +:10F2B000FE4F012429467C70B81C15F02FF97E7092 +:10F2C0006946062001F0FDFA002818BFFFDF6846F6 +:10F2D00001F0D5FA002808BFBDF804500AD1029801 +:10F2E00080F80041684601F0CAFA18B9BDF8040078 +:10F2F000A842F4D103B00020F0BD10B50446008848 +:10F30000062101F055FB68B190F8D01090F87320F9 +:10F3100042B9002918BF042904D0D0F8F8100A789F +:10F3200012B105E0022010BDD0F8442112780AB1D4 +:10F330003A2010BD90F8962012F0010F04BF0C2067 +:10F3400010BDD4F80220D4F806304A608B60D0F8A3 +:10F35000F81062898A81D0F8F810E268C1F80E20AE +:10F360002269C1F812206269C1F81620A269C1F8A9 +:10F370001A20D0F8F82003211170D0F8F800218865 +:10F380004180002010BDF8B515460E46044609F030 +:10F39000F7F900281CBF0C20F8BD20781223EF28B5 +:10F3A00073D86088ADF8000010F0100F4FF0000126 +:10F3B0000CD010F0010F00F002021BD0B2B110F01F +:10F3C000080F08BF10F0040F1ED01AE010F0080F4D +:10F3D0007ED110F0200F18BF10F0030F78D110F07D +:10F3E000010F18BF10F0020F72D10DE010F0040FE2 +:10F3F0000AD106E02AB110F0080F08BF10F0040F80 +:10F4000002D010F00F0F63D1608810F0080F09D1FF +:10F41000D4E901C2624528BFBCF1200F58D3B2F134 +:10F42000807F55D2227B002A52D0072A50D894F8E8 +:10F430000DC0BCF1000F18BFBCF1010F05D0BCF12D +:10F44000020F18BFBCF1030F42D110F0040F05D119 +:10F45000BCF1020F18BFBCF1030F07D1A27B002A39 +:10F4600018BF012A34D110F0040F08D1627D002AA0 +:10F4700018BF012A03D0022A18BF032A28D1E27D2F +:10F4800010F0100F02D0012A10D021E0012A18BF7D +:10F49000032A1DD110F0100F08D1627E012A1CBF73 +:10F4A000022A032A14D1A27E0F2A11D8E27E002A52 +:10F4B00018BF012A0CD1E27D1123032A08D010F0D5 +:10F4C000100F04BF627E032A02D010F0400F01D05B +:10F4D0001846F8BD3170A17555B9FF208DF80000B0 +:10F4E0006946002006F0EDFD6946002006F0D4FDD7 +:10F4F0002046BDE8F84006F004BD002243E72DE9B0 +:10F50000F0470446C0780F46122510B106F063FD9F +:10F5100050B1607804280AD094F8038094F80090E1 +:10F520006678B8F1FB0F12D92846BDE8F08709F0DC +:10F5300027F90028F8D006F0A6FD0028F4D106F03F +:10F540009AFA002804BFE0780028EDD1E4E71FB163 +:10F55000B8F11F0F23D9E7E706F08DFA28B1B8F10B +:10F560001F0F98BF032E07D0DEE7032E18BF042E0F +:10F5700002D0B8F1000FD7D009F002F9002818BF67 +:10F58000032E04D0042E1CBF0C20BDE8F087484693 +:10F5900006F069FA002804BF4220BDE8F087E07851 +:10F5A00061781F2898BF03291CBF1120BDE8F08790 +:10F5B000211D06F086FD0020BDE8F08700219EE7B2 +:10F5C0002DE9F0470446C0788846122710B106F0AE +:10F5D00098FD38B16578042D04D0E67894F8009051 +:10F5E000FB2E02D93846BDE8F087B8F1000F02D0F3 +:10F5F0001F2E21D9F6E706F03EFA20B11F2E98BF44 +:10F60000032D06D0EEE7032D18BF042D01D0002EE8 +:10F61000E8D009F0B5F8002818BF032D04D0042D58 +:10F620001CBF0C20BDE8F087484606F01CFA0028F5 +:10F6300004BF4220BDE8F087E07861781F2898BFBA +:10F6400003291CBF1120BDE8F087211D06F024FD11 +:10F650000020BDE8F0870021B2E72DE9F041044623 +:10F660004078422582B0012808D8A07806F0FBF93E +:10F6700020B120781225012804D0A0B102B028467C +:10F68000BDE8F08106F04BFD20B1A0880028F5D040 +:10F690008028F3D806F050FD90B160780028EDD0B6 +:10F6A0002078012810D003E089F3FFFF3206002004 +:10F6B00007F0EAFE044608F0DBFC002800F0EA80D0 +:10F6C00002B00C20BDE8F08106F046FB38B906F028 +:10F6D0001FFD002802BF122002B0BDE8F08109F032 +:10F6E0004FF80028ECD106F07EF9A0F57F41FF39F4 +:10F6F000E6D106F050FBA08842F2107100FB01F643 +:10F70000A079314606F078FC06F0F4FC18B300222C +:10F71000072101A801F01AF9040002BF092002B074 +:10F72000BDE8F081F6480321846020460CF072FBAE +:10F73000204607F0EBF8F34DA88AA4F84A00E88ABF +:10F74000A4F84C0006F097F968B1288B012108F065 +:10F7500013FEA0620FE03146002008F063FD002890 +:10F7600018BFFFDFA1E006F0E9FC2A8B0146104636 +:10F7700008F002FEA06201460022204607F087FE44 +:10F7800006F079F9002808BF06F0D8FCE87C009064 +:10F79000AB7CEA8AA98A208801F0C5F9002818BF45 +:10F7A000FFDF208805F0A4FF3146204608F03AFD2F +:10F7B000002818BFFFDF2146B4F84C00002204F5F2 +:10F7C000CD76FB2828BFFB206B89834238BF1846C3 +:10F7D00091F855304FF4747413F00C0F1CBF04EB08 +:10F7E00080131FFA83FC38D0AF89674528BF67466E +:10F7F000B1F84A30FB2B28BFFB23B5F80EC09C455F +:10F8000038BF634691F854C01CF00C0F1CBF04EBCA +:10F81000831C1FFA8CF829D02C8A444528BF444603 +:10F820001B2B18BFB4F5A47F2ED0F08037817380D6 +:10F83000B4803046FEF7FEFFB08840F648018842AB +:10F8400028BF40F64800B0803089884228BF40F683 +:10F85000480030810120307027E0022B07BF830071 +:10F860003C33C30070331FFA83FCBDE7BCF1020FC9 +:10F8700007BF4FEA830C0CF13C0C4FEAC30C0CF1B0 +:10F88000700C1FFA8CF8C7E71B2818BFB7F5A47FC8 +:10F89000CBD10AE04CB1208805F02BFF208807214E +:10F8A00001F098F8002818BFFFDF002002B0BDE883 +:10F8B000F0810021D1E610B50C46072101F078F85F +:10F8C000002804BF022010BD90F8731109B10C206C +:10F8D00010BD90F86510142912BF152990F8C011B9 +:10F8E0000029F4D12168C0F874116168C0F878115A +:10F8F000A168C0F87C11E168C0F88011012180F88E +:10F900007311002010BD10B5072101F051F8002837 +:10F9100004BF022010BD90F8731109B10C2010BD76 +:10F9200090F86510142918BF1529F7D1022180F825 +:10F930007311002010BDF0B50E464BF68032122137 +:10F9400083B0964217D8B6B1694600F049F900284D +:10F950001CBF03B0F0BD019800F15807841C258836 +:10F960003246294638460CF00FFA2088A842F6D1D4 +:10F9700003B00020F0BD03B00846F0BD10B582B062 +:10F9800004460088694600F02BF900281CBF02B02D +:10F9900010BD0198A37800F1580190F82C209A42EC +:10F9A00002BF0C2002B010BD7F220A728A720022B0 +:10F9B000CA72E17880F82D10217980F82E10A17894 +:10F9C00080F82C1002B0104610BD10B582B00C4665 +:10F9D000694600F005F900281CBF02B010BD01986F +:10F9E00090F87300002818BF0120207002B000209A +:10F9F00010BD30B583B00D461446694600F0F0F8EE +:10FA000000281CBF03B030BD019890F82C000128DD +:10FA10001EBF0C2003B030BD019890F86010297013 +:10FA200090F86100207003B0002030BD70B50D4625 +:10FA30001646072100F0BCFF002804BF022070BD5D +:10FA400083884FF0010CC28841880CEB430C65455C +:10FA50001AD342F2107C02FB0CF240F6C41C01FBEC +:10FA60000CF1B2FBF1F1491E8CB2B4F5FA7F88BFFC +:10FA70004FF4FA74A54238BF2C46621C591CB2FBE5 +:10FA8000F1F25143491E8BB290F8AC11002908BF26 +:10FA900003843380002070BD10B50C46072100F0B0 +:10FAA00087FF002804BF022010BD80F8DF40002C33 +:10FAB0001EBF90F8DD10002908F081FC002010BD69 +:10FAC000017800291CBF417800290ED041881B29EC +:10FAD00021BF81881B29C188022906D30A490268EF +:10FAE00040680A654865002070471220704710B5CD +:10FAF000044610F005FD204608F009FC002010BD6A +:10FB00005C00002032060020F40500202DE9F041C1 +:10FB100016460F46044601221146384610F0F3FC03 +:10FB200005460121384608F027FC854228BF2846B3 +:10FB30000123E100503189B2E631884206D901F152 +:10FB40009602401AB0FBF2F0401C83B233800020D2 +:10FB5000BDE8F08110B5044611F0E8F8042806D09D +:10FB600011F0E4F8052802D008F00AFE08B10C20D4 +:10FB700010BD601C0BF05DFF207800F0010006F066 +:10FB800005F9207800F001000EF005F9002010BD05 +:10FB900010B50446072000F0A5FE00281CBF0C206D +:10FBA00010BD207810F0010F11D0002260781146AE +:10FBB00013F0B8FC00281CBF122010BDA0680AF08A +:10FBC00048FA607861680AF04DFA002010BD002004 +:10FBD0000AF03FFA002108460AF044FA002010BD5E +:10FBE00070B50C460546062100F0E2FE606010B1DB +:10FBF0000020207070BD0721284600F0D9FE60600B +:10FC0000002804BF022070BD01202070002070BDBC +:10FC100010B582B0044600886946FFF7E1FF020094 +:10FC20001CBF02B010BDA088002818BF012804D056 +:10FC300002281EBF122002B010BDA178002908BF03 +:10FC40000321E078002808BF03204FF0000C9DF846 +:10FC500000400123002C019C06D084F8A531019CB2 +:10FC600094F8F241ECB124E084F80F31019C94F84F +:10FC700034413CB9019C94F80E411CB9019C94F8A4 +:10FC80007D400CB13A2208E0019C84F80E31019BC2 +:10FC900083F81011019981F81101019880F80FC1C2 +:10FCA00015E0019C94F8A4411CB9019C94F87D4096 +:10FCB0000CB13A2208E0019C84F8A431019B83F83E +:10FCC000A611019981F8A701019880F8A5C102B099 +:10FCD000104610BD427A12F0070F10D032F0070321 +:10FCE0000DD112F0040F01D011207047012A18BF66 +:10FCF000022AF9D190F83A301BB9012A01D012201A +:10FD000070472DE9F0074FF0000C12F0010F40F69C +:10FD1000774740F67B4337D069B14489B0F810C0CB +:10FD2000261F43F6FD75AE423CBFACF10406AE4261 +:10FD300026D2644524D3C68AB0F81CC0448C058DF5 +:10FD4000B0F82E90B0F83480A6F1060A9A453CBF70 +:10FD5000ACF1060A9A4513D2664598BFB4F5FA7F0E +:10FD60003CBFA5F10A06BE420AD2641C04FB0CFC8F +:10FD7000BCEB850F04DAC14598BF4FF0010C03D9E5 +:10FD8000BDE8F0073020704712F0020F22D000EBE0 +:10FD90004C02D68AB2F81CC0558C148DB2F82E8055 +:10FDA000928EA6F106094B4584BFACF106094B457E +:10FDB000E6D9664598BFB5F5FA7F3CBFA4F10A03C2 +:10FDC000BB42DDD26B1C03FB0CF3B3EB840FD7DA21 +:10FDD0009045D5D802782AB1012A13D0BDE8F007A2 +:10FDE000122070470029817808D0002918BF012906 +:10FDF00008D0022918BF032904D0EFE7002918BF53 +:10FE00000129EBD14078002818BF012803D002282F +:10FE100018BF0328E2D1BDE8F007002070470000BA +:10FE200030B5058825F4004421448CB24FF40041DC +:10FE300094420AD2121B92B21B339A4201D2A943B6 +:10FE400007E005F40041214303E0A21A92B2A9435E +:10FE50001143018030BD0844083050434A31084402 +:10FE600080B2704770B51D4616460B4604462946BB +:10FE70003046049AFFF7EFFF0646B34200D2FFDF99 +:10FE80002821204614F035FA4FF6FF70A082283E54 +:10FE9000B0B265776080B0F5004F00D9FFDF6188B0 +:10FEA00005F13C00814200D2FFDF60880835401B2D +:10FEB000343880B220801B2800D21B2020800020F4 +:10FEC000A07770BD8161886170472DE9F05F0D46B4 +:10FED000C188044600F12809008921F4004620F475 +:10FEE000004800F062FB10B10020BDE8F09F4FF029 +:10FEF000000A4FF0010BB0450CD9617FA8EB06005A +:10FF0000401A0838854219DC09EB060000210580FB +:10FF100041801AE06088617F801B471A083F0DD43A +:10FF20001B2F00DAFFDFBD4201DC294600E0B9B239 +:10FF3000681A0204120C04D0424502DD84F817A0AE +:10FF4000D2E709EB06000180428084F817B0CCE7C5 +:10FF500070B5044600F12802C088E37D20F400401B +:10FF60002BB110440288438813448B4201D20020F5 +:10FF700070BD00258A4202D30180458008E0891ABD +:10FF80000904090C418003D0A01D00F01EFB08E00D +:10FF9000637F00880833184481B26288A01DFFF790 +:10FFA0003FFFE575012070BD70B5034600F12804E0 +:10FFB000C588808820F400462644A84202D100204B +:10FFC000188270BD98893588A84206D3401B758871 +:10FFD0002D1A2044ADB2C01E05E02C1AA5B25C7FDC +:10FFE00020443044401D0C88AC4200D90D809C89CF +:10FFF00024B1002414700988198270BD0124F9E726 +:020000040001F9 +:1000000070B5044600F12801808820F400404518AE +:10001000208A002825D0A189084480B2A08129889F +:100020006A881144814200D2FFDF2888698800264F +:100030000844A189884212D1A069807F287169880B +:1000400019B1201D00F0C1FA08E0637F2888083349 +:10005000184481B26288201DFFF7E2FEA681268245 +:10006000012070BD2DE9F0414189878800260446B2 +:1000700000F12805B94218D004F10A0821F4004023 +:100080002844418819B1404600F09FFA08E0637F98 +:1000900000880833184481B262884046FFF7C0FEEA +:1000A000761C6189B6B2B942E8D13046BDE8F0812C +:1000B0002DE9F04104460B4627892830A68827F40D +:1000C0000041B4F80A8001440D46B74201D1002036 +:1000D000ECE70AB1481D106023B1627F691D184624 +:1000E00014F066F82E88698804F1080021B18A1995 +:1000F00096B200F06AFA06E0637F628808339919C5 +:1001000089B2FFF78DFE474501D1208960813046D5 +:10011000CCE78188C088814201D10120704700204E +:10012000704701898088814201D1012070470020F9 +:10013000704770B58588C38800F1280425F4004213 +:1001400023F4004114449D421AD08389058A5E1924 +:1001500025886388EC18A64214D313B18B4211D3BF +:100160000EE0437F08325C192244408892B2801A24 +:1001700080B22333984201D211B103E08A4201D107 +:10018000002070BD012070BD2DE9F0478846C18870 +:100190000446008921F4004604F1280720F40045B4 +:1001A00007EB060900F001FA002178BBB54204D93B +:1001B000627FA81B801A002503E06088627F801B95 +:1001C000801A083823D4E28962B1B9F80020B9F85E +:1001D00002303BB1E81A2177404518DBE08938440A +:1001E000801A09E0801A217740450ADB607FE189A7 +:1001F0000830304439440844C01EA4F81280BDE8D9 +:10020000F087454503DB01202077E7E7FFE76182C0 +:100210000020F4E72DE9F74F044600F12805C088D7 +:10022000884620F4004A608A05EB0A0608B140457A +:1002300002D20020BDE8FE8FE08978B13788B6F899 +:10024000029007EB0901884200D0FFDF207F4FF0CA +:10025000000B50EA090106D088B33BE00027A07FDD +:10026000B9463071F2E7E18959B1607F294408301D +:1002700050440844B4F81F1020F8031D94F82110CE +:100280008170E28907EB080002EB0801E181308010 +:10029000A6F802B002985F4650B1637F30880833F9 +:1002A000184481B26288A01DFFF7BAFDE78121E002 +:1002B000607FE18908305044294408442DE0FFE77D +:1002C000E089B4F81F102844C01B20F8031D94F8DF +:1002D0002110817009EB0800E28981B202EB08006D +:1002E000E081378071800298A0B1A01D00F06DF907 +:1002F000A4F80EB0A07F401CA077A07D08B1E088D4 +:10030000A08284F816B000BFA4F812B084F817B029 +:1003100001208FE7E0892844C01B30F8031DA4F8B2 +:100320001F10807884F82100EEE710B5818800F175 +:10033000280321F400442344848AC288A14212D0B5 +:10034000914210D0818971B9826972B11046FFF76C +:10035000E8FE50B91089283220F400401044197981 +:100360000079884201D1002010BD184610BD00F16F +:100370002803407F08300844C01E1060088808B970 +:10038000DB1E136008884988084480B270472DE955 +:10039000F04100F12806407F1C4608309046431883 +:1003A00008884D88069ADB1EA0B1C01C80B290421E +:1003B00014D9801AA04200DB204687B298183A462A +:1003C000414613F0C9FE002816D1E01B84B2B844A0 +:1003D000002005E0ED1CADB2F61EE8E7101A80B271 +:1003E0000119A94206D8304422464146BDE8F041F1 +:1003F00013F0B2BE4FF0FF3058E62DE9F04100F1A6 +:100400002804407F1E46083090464318002508887F +:100410004F88069ADB1E90B1C01C80B2904212D960 +:10042000801AB04200DB304685B299182A46404611 +:1004300013F0BEFE701B86B2A844002005E0FF1C2E +:10044000BFB2E41EEAE7101A80B28119B94206D899 +:1004500021183246404613F0ABFEA81985B2284653 +:1004600024E62DE9F04100F12804407F1E460830C3 +:1004700090464318002508884F88069ADB1E90B1E5 +:10048000C01C80B2904212D9801AB04200DB3046C4 +:1004900085B298182A46414613F08AFE701B86B230 +:1004A000A844002005E0FF1CBFB2E41EEAE7101AD2 +:1004B00080B28119B94206D820443246414613F031 +:1004C00077FEA81985B22846F0E5401D704710B5A3 +:1004D000044600F12801C288808820F400431944B2 +:1004E000904206D0A28922B9228A12B9A28A9042E9 +:1004F00001D1002010BD0888498831B1201D00F0CD +:1005000064F800202082012010BD637F62880833D8 +:10051000184481B2201DFFF783FCF2E70021C1815E +:1005200001774182C1758175704703881380C28944 +:1005300042B1C28822F4004300F128021A440A6042 +:10054000C08970470020704710B50446808AA0F526 +:100550007F41FF3900D0FFDFE088A082E08900B151 +:100560000120A07510BD4FF6FF71818200218175B9 +:10057000704710B50446808AA0F57F41FF3900D14D +:10058000FFDFA07D28B9A088A18A884201D1002080 +:1005900010BD012010BD8188828A914201D1807DE9 +:1005A00008B1002070470120704720F4004221F478 +:1005B00000439A4207D100F4004001F40041884210 +:1005C00001D0012070470020704730B504460088F4 +:1005D0000D4620F40040A84200D2FFDF21884FF4EE +:1005E000004088432843208030BD70B50C0005468C +:1005F00009D0082C00D2FFDF1DB1A1B2286800F09D +:1006000044F8201D70BD0DB100202860002070BD91 +:100610000021026803E093881268194489B2002A15 +:10062000F9D100F032B870B500260D46044608290D +:1006300000D2FFDF206808B91EE0044620688188E8 +:10064000A94202D001680029F7D181880646A94253 +:1006500001D100680DE005F1080293B20022994231 +:1006600009D32844491B0260818021680968216000 +:100670000160206000E00026304670BD00230B6062 +:100680008A8002680A600160704700234360021D8F +:10069000018102607047F0B50F4601884088154619 +:1006A0000C181E46AC4200D3641B3044A84200D94B +:1006B000FFDFA019A84200D9FFDF3819F0BD2DE9EE +:1006C000F041884606460188408815460C181F46AA +:1006D000AC4200D3641B3844A84200D9FFDFE019C4 +:1006E000A84200D9FFDF70883844708008EB04000E +:1006F000BDE8F0812DE9F041054600881E46174609 +:10070000841B8846BC4200D33C442C80688830441B +:10071000B84200D9FFDFA019B84200D9FFDF6888CE +:100720003044688008EB0400E2E72DE9F0410688D8 +:100730001D460446701980B2174688462080B8428C +:1007400001D3C01B20806088A84200D2FFDF70194F +:10075000B84200D9FFDF6088401B608008EB0600CC +:10076000C6E730B50D460188CC18944200D3A41AD0 +:100770004088984200D8FFDF281930BD2DE9F041AC +:10078000C84D04469046A8780E46A04200D8FFDF28 +:1007900005EB8607B86A50F8240000B1FFDFB8689F +:1007A000002816D0304600F044F90146B868FFF73B +:1007B0003AFF05000CD0B86A082E40F8245000D348 +:1007C000FFDFB9484246294650F826302046984770 +:1007D0002846BDE8F0812DE9F8431E468C19914664 +:1007E0000F460546FF2C00D9FFDFB14500D9FFDFDA +:1007F000E4B200954DB300208046E81C20F00300D1 +:10080000A84200D0FFDF4946DFF89892684689F891 +:10081000001089F8017089F8024089F8034089F8CE +:10082000044089F8054089F8066089F80770414658 +:1008300000F008F9002142460F464B460098C01CC4 +:1008400020F00300009012B10EE00120D4E703EB8A +:100850008106B062002005E0D6F828C04CF8207070 +:10086000401CC0B2A042F7D30098491C00EB8400A2 +:10087000C9B200900829E1D3401BBDE8F88310B548 +:10088000044603F071FD08B1102010BD2078854AA0 +:10089000618802EB800092780EE0836A53F8213081 +:1008A00043B14A1C6280A180806A50F82100A06098 +:1008B000002010BD491C89B28A42EED86180052013 +:1008C00010BD70B505460C46084603F04DFD08B155 +:1008D000102070BD082D01D3072070BD25700020A9 +:1008E000608070BD0EB56946FFF7EBFF00B1FFDF1A +:1008F0006846FFF7C4FF08B100200EBD01200EBD01 +:1009000010B50446082800D3FFDF6648005D10BD1F +:100910003EB5054600246946FFF7D3FF18B1FFDF57 +:1009200001E0641CE4B26846FFF7A9FF0028F8D094 +:100930002846FFF7E5FF001BC0B23EBD5949897844 +:10094000814201D9C0B27047FF2070472DE9F041C4 +:10095000544B062903D007291CD19D7900E00025BE +:1009600000244FF6FF7603EB810713F801C00AE07D +:100970006319D7F828E09BB25EF823E0BEF1000FC0 +:1009800004D0641CA4B2A445F2D8334603801846B0 +:10099000B34201D100201CE7BDE8F041EEE6A0F52E +:1009A0007F43FF3B01D0082901D300207047E5E6D3 +:1009B000A0F57F42FF3A0BD0082909D2394A937833 +:1009C000834205D902EB8101896A51F82000704702 +:1009D000002070472DE9F04104460D46A4F57F4103 +:1009E00043F20200FF3902D0082D01D30720F0E6C0 +:1009F0002C494FF000088A78A242F8D901EB85060D +:100A0000B26A52F82470002FF1D0274839462030BE +:100A100050F8252020469047B16A284641F82480A6 +:100A200000F007F802463946B068FFF727FE0020BD +:100A3000CFE61D49403131F810004FF6FC71C01C63 +:100A4000084070472DE9F843164E884605460024B5 +:100A50002868C01C20F0030028602046FFF7E9FF4B +:100A6000315D4843B8F1000F01D0002200E02A6850 +:100A70000146009232B100274FEA0D00FFF7B5FDA5 +:100A80001FB106E001270020F8E706EB8401009A79 +:100A90008A602968641C0844E4B22860082CD7D313 +:100AA000EBE60000500600204C47020070B50E46F1 +:100AB0001D46114600F0D4F804462946304600F0A1 +:100AC000D8F82044001D70BD2DE9F04190460D4638 +:100AD00004004FF0000610D00027E01C20F00300B7 +:100AE000A04200D0FFDFDDB141460020FFF77DFDD1 +:100AF0000C3000EB850617B112E00127EDE7614FDE +:100B000004F10C00A9003C602572606000EB8500D8 +:100B10002060606813F0EDFB41463868FFF765FD23 +:100B20003046BDE8F0812DE9FF4F564C804681B03C +:100B300020689A46934600B9FFDF2068027A424552 +:100B400003D9416851F8280020B143F2020005B0F2 +:100B5000BDE8F08F5146029800F082F886B2584600 +:100B60000E9900F086F885B27019001D87B22068D2 +:100B7000A14639460068FFF756FD04001FD0678084 +:100B800025802946201D0E9D07465A4601230095C3 +:100B9000FFF768F92088314638440123029ACDF8DE +:100BA00000A0FFF75FF92088C1193846FFF78AF9DE +:100BB000D9F800004168002041F82840C7E7042028 +:100BC000C5E770B52F4C0546206800B9FFDF2068E7 +:100BD000017AA9420ED9426852F8251051B100237A +:100BE00042F825304A880068FFF748FD2168002058 +:100BF0000A7A08E043F2020070BD4B6853F82030D7 +:100C000033B9401CC0B28242F7D80868FFF700FD34 +:100C1000002070BD70B51B4E05460024306800B939 +:100C2000FFDF3068017AA94204D9406850F82500F6 +:100C300000B1041D204670BD70B5124E054600245B +:100C4000306800B9FFDF3068017AA94206D94068F0 +:100C500050F8251011B131F8040B4418204670BD2E +:100C600010B50A460121FFF7F6F8C01C20F003007A +:100C700010BD10B50A460121FFF7EDF8C01C20F0A9 +:100C8000030010BD7000002070B50446C2F11005CD +:100C9000281913F08DFA15F0FF0108D0491EC9B2CA +:100CA000802060542046BDE8704013F000BB70BD4A +:100CB00030B505E05B1EDBB2CC5CD55C6C40C45447 +:100CC000002BF7D130BD10B5002409E00B78521E7F +:100CD00044EA430300F8013B11F8013BD2B2DC09BE +:100CE000002AF3D110BD2DE9F04389B01E46DDE99D +:100CF000107990460D00044622D002460846F94974 +:100D0000FDF77CFC102221463846FFF7DCFFE07B34 +:100D1000000606D5F34A3946102310320846FFF77D +:100D2000C7FF102239464846FFF7CDFFF87B000683 +:100D300006D5EC4A4946102310320846FFF7B8FFA3 +:100D40001021204613F0B3FA0DE0103EB6B208EBC6 +:100D50000601102322466846FFF7AAFF22462846CE +:100D60006946FDF74BFC102EEFD818D0F2B2414681 +:100D70006846FFF789FF10234A46694604A8FFF733 +:100D800097FF1023224604A96846FFF791FF2246E9 +:100D900028466946FDF732FC09B0BDE8F083102310 +:100DA0003A464146EAE770B59CB01E4605461346F2 +:100DB00020980C468DF80800202219460DF10900F4 +:100DC00013F0F6F9202221460DF1290013F0F0F975 +:100DD00017A913A8CDE90001412302AA31462846EC +:100DE000FFF781FF1CB070BD2DE9FF4F9FB014AE1F +:100DF000DDE92D5410AFBB49CDE900762023203129 +:100E00001AA8FFF770FF4FF000088DF808804FF028 +:100E100001098DF8099054F8010FCDF80A00A08857 +:100E2000ADF80E0014F8010C1022C0F340008DF84C +:100E3000100055F8010FCDF81100A888ADF8150085 +:100E400015F8010C2C99C0F340008DF8170006A886 +:100E5000824613F0ADF90AA883461022229913F0B6 +:100E6000A7F9A0483523083802AA40688DF83C80CD +:100E7000CDE900760E901AA91F98FFF734FF8DF880 +:100E800008808DF809902068CDF80A00A088ADF898 +:100E90000E0014F8010C1022C0F340008DF8100071 +:100EA0002868CDF81100A888ADF8150015F8010CD8 +:100EB0002C99C0F340008DF81700504613F078F9D4 +:100EC00058461022229913F073F9864835230838C2 +:100ED00002AA40688DF83C90CDE900760E901AA9E0 +:100EE0002098FFF700FF23B0BDE8F08FF0B59BB06E +:100EF0000C460546DDE922101E461746DDE9203284 +:100F0000D0F801C0CDF808C0B0F805C0ADF80CC0ED +:100F10000078C0F340008DF80E00D1F80100CDF844 +:100F20000F00B1F80500ADF8130008781946C0F3BA +:100F300040008DF815001088ADF8160090788DF8F7 +:100F400018000DF11900102213F032F90DF12900EB +:100F50001022314613F02CF90DF1390010223946D8 +:100F600013F026F917A913A8CDE90001412302AA1D +:100F700021462846FFF7B7FE1BB0F0BDF0B5A3B081 +:100F800017460D4604461E46102202A8289913F063 +:100F90000FF906A82022394613F00AF90EA82022DC +:100FA000294613F005F91EA91AA8CDE9000150231E +:100FB00002AA314616A8FFF796FE1698206023B0C5 +:100FC000F0BDF0B589B00446DDE90E070D4639786D +:100FD000109EC1F340018DF8001031789446C1F3A2 +:100FE00040018DF801101968CDF802109988ADF80C +:100FF000061099798DF808100168CDF809108188DC +:10100000ADF80D1080798DF80F0010236A46614607 +:1010100004A8FFF74DFE2246284604A9FDF7EEFA84 +:10102000D6F801000090B6F80500ADF80400D7F836 +:101030000100CDF80600B7F80500ADF80A00002061 +:10104000039010236A46214604A8FFF731FE22468A +:10105000284604A9FDF7D2FA09B0F0BD1FB51C68F7 +:1010600000945B68019313680293526803920246EE +:1010700008466946FDF7C2FA1FBD10B588B00446A0 +:10108000106804905068059000200690079008466C +:101090006A4604A9FDF7B2FABDF80000208008B046 +:1010A00010BD1FB51288ADF800201A88ADF80220D7 +:1010B0000022019202920392024608466946FDF719 +:1010C0009DFA1FBD7FB5074B14460546083B9A1C89 +:1010D0006846FFF7E6FF224669462846FFF7CDFF40 +:1010E0007FBD0000A447020070B5044600780E469C +:1010F000012813D0052802D0092813D10EE0A068DA +:1011000061690578042003F0BDF8052D0AD0782325 +:1011100000220420616903F00BF803E004206169F8 +:1011200003F0B0F831462046BDE8704001F086B8C3 +:1011300010B500F12D02C3799478411D64F00304C9 +:101140002340C371DB070DD04B79547923404B7199 +:101150000B79127913400B718278C9788A4200D9D1 +:10116000817010BD00224A710A71F5E741780129AA +:1011700000D00C21017070472DE9F04F93B04FF073 +:10118000000B0C690D468DF820B0097801260C2063 +:1011900017464FF00D084FF0110A4FF008091B29B0 +:1011A00075D2DFE811F01B00C30206031E035D03C6 +:1011B0007003A203B703F803190461049304A004A5 +:1011C000EC042A05340552055D05EE0531063406AA +:1011D00063067F06F9061D07E606EB0614B12078C4 +:1011E0001D282AD0D5F808805FEA08004FD00120DA +:1011F0008DF82000686A02220D908DF824200A20C4 +:101200008DF82500A8690A90A8880028EED098F8E3 +:10121000001091B10F2910D27ED2DFE801F07D13CA +:1012200049DEFEFDFCFBFAF938089CF8F7000228BD +:101230002DD124B120780C2801D00026EFE38DF8C1 +:101240002020CBE10420696A03F01CF8A888072855 +:10125000EED1204600F0EDFF022809D0204600F034 +:10126000E8FF032807D9204600F0E3FF072802D251 +:101270000120207004E0002CB8D020780128D7D1BC +:1012800098F80400C11F0A2902D30A2061E0C4E1D2 +:10129000A070D8F80010E162B8F80410218698F820 +:1012A000060084F83200012028700320207044E0FA +:1012B0000728BDD1002C99D020780D28B8D198F8F6 +:1012C000031094F82F20C1F3C000C2F3C0021042F3 +:1012D00001D0062000E00720890707D198F8051003 +:1012E0000142D2D198F806100142CED194F83120B3 +:1012F00098F8051020EA02021142C6D194F8322073 +:1013000098F8061090430142BFD198F80400C11F1D +:101310000A29BAD2617D00E006E281427ED8D8F87F +:1013200000106160B8F80410218198F80600A072DE +:10133000012028700E20207003208DF82000686A9C +:101340000D9004F12D000990601D0A900F300B9054 +:1013500022E12875FDE3412891D1204600F069FF84 +:10136000042802D1E078C00704D1204600F061FFD4 +:101370000F2884D1A88CD5F80C8080B24FF0400B98 +:10138000E669FFF747FC324641465B464E46CDF8DC +:101390000090FFF732F80B208DF82000686A0D905E +:1013A000E0690990002108A8FFF79EFE2078042834 +:1013B00006D0A07D58B1012809D003280AD049E3FE +:1013C00005202070032028708DF82060CDE184F87E +:1013D00000A032E712202070E9E11128BCD120469C +:1013E00000F027FF042802D1E078C00719D020467A +:1013F00000F01FFF062805D1E078C00711D1A07DBD +:1014000002280ED0204600F014FF08E0CAE081E078 +:101410006FE14EE121E101E1E7E017E0ADE11128E4 +:101420009AD1102208F1010104F13C0012F0C0FE33 +:10143000607801287ED012202070E078C00760D04C +:10144000A07D0028C8D00128C6D05AE0112890D12C +:10145000204600F0EEFE082804D0204600F0E9FE09 +:10146000132886D104F16C00102208F10101064610 +:1014700012F09EFE207808280DD014202070E1780C +:10148000C8070DD0A07D02280AD06278022A04D0B5 +:101490000328A1D035E00920F0E708B1012837D1B1 +:1014A000C80713D0A07D02281DD000200090D4E9E9 +:1014B000062133460EA8FFF776FC10220EA904F190 +:1014C0003C0012F049FEC8B1042042E7D4E90912F9 +:1014D000201D8DE8070004F12C0332460EA8616B35 +:1014E000FFF76FFDE9E7606BC1F34401491E006837 +:1014F000C84000F0010040F08000D7E720780928BC +:1015000006D185F800908DF8209033E32870ECE345 +:101510000920FBE711289AD1204600F08AFE0A280C +:1015200002D1E078C00704D1204600F082FE1528E1 +:101530008DD100E08DE104F13C00102208F10101A1 +:10154000064612F035FE20780A2816D016202070A4 +:10155000D4E90932606B611D8DE80F0004F15C0372 +:1015600004F16C0247310EA8FFF7C0FC10220EA94F +:10157000304612F0F1FD18B1F5E20B20207071E257 +:101580002046FFF7D5FDA078216A0A18C0F11001A6 +:10159000104612F08CFE23E3394608A8FFF7A4FD9D +:1015A00006463BE20228B6D1204600F042FE04285F +:1015B00004D3204600F03DFE082809D3204600F061 +:1015C00038FE0E2829D3204600F033FE122824D2FC +:1015D000A07D02289FD10E208DF82000686A0D9012 +:1015E00098F801008DF82400F0E3022893D12046FA +:1015F00000F01FFE002810D0204600F01AFE01283F +:10160000F9D0204600F015FE0C28F4D004208DF807 +:10161000240098F801008DF825005EE21128FCD125 +:10162000002CFAD020781728F7D16178606A022957 +:1016300011D0002101EB4101182606EBC101102257 +:10164000405808F1010112F0B3FD0420696A00F06E +:10165000E3FD2670F1E50121ECE70B28DDD1002C3C +:10166000DBD020781828D8D16078616A02281CD095 +:101670005FF0000000EB4002102000EBC2000958B0 +:10168000B8F8010008806078616A02280FD0002055 +:1016900000EB4002142000EBC2000958404650F80D +:1016A000032F0A604068486039E00120E2E701202A +:1016B000EEE71128B1D1002CAFD020781928ACD199 +:1016C0006178606A022912D05FF0000101EB4101EC +:1016D0001C2202EBC1011022405808F1010112F056 +:1016E00067FD0420696A00F097FD1A20B6E0012129 +:1016F000ECE7082891D1002C8FD020781A288CD1C3 +:10170000606A98F80120017862F347010170616A0C +:10171000D8F8022041F8012FB8F80600888004208C +:10172000696A00F079FD8EE2072012E63878012818 +:1017300094D1182204F11400796812F07EFDE0794A +:10174000C10894F82F0001EAD001E07861F30000AD +:10175000E070217D002974D12178032909D0C007C8 +:1017600025D0032028708DF82090686A0D904120C4 +:1017700004E3607DA178884201D90620E9E50226CC +:101780002671E179204621F0E001E171617A21F0D2 +:10179000F0016172A17A21F0F001A172FFF7C8FC9B +:1017A0002E708DF82090686A0D900720E6E20420E4 +:1017B000ACE6387805289DD18DF82000686A0D9038 +:1017C000B8680A900720ADF824000A988DF830B068 +:1017D0006168016021898180A17A81710420207073 +:1017E000F4E23978052985D18DF82010696A0D91C8 +:1017F000391D09AE0EC986E80E004121ADF824104E +:101800008DF830B01070A88CD7F80C8080B24026CC +:10181000A769FFF711FA41463A463346C846CDF864 +:101820000090FEF71EFE002108A8FFF75DFCE0789F +:1018300020F03E00801CE0702078052802D00F20A8 +:101840000CE049E1A07D20B1012802D0032802D09C +:1018500002E10720BFE584F80080EEE42070ECE4AC +:10186000102104F15C0002F034FA606BB0BBA07D83 +:1018700018B1012801D00520FDE006202870F748A6 +:101880006063A063BEE23878022894D1387908B149 +:101890002875B3E3A07D022802D0032805D022E0FA +:1018A000B8680028F5D060631CE06078012806D095 +:1018B000A07994F82E10012805D0E84806E0A17917 +:1018C00094F82E00F7E7B8680028E2D06063E0786B +:1018D000C00701D0012902D0E04803E003E0F86826 +:1018E0000028D6D0A063062010E68DF82090696A03 +:1018F0000D91E1784846C90709D06178022903D1E2 +:10190000A17D29B1012903D0A17D032900D00720A1 +:10191000287031E138780528BBD1207807281ED0FF +:1019200084F800A005208DF82000686A0D90B86842 +:101930000A90ADF824A08DF830B003210170E17851 +:10194000CA070FD0A27D022A1AD000210091D4E943 +:10195000061204F15C03401CFFF725FA67E384F8E4 +:101960000090DFE7D4E90923211D8DE80E0004F182 +:101970002C0304F15C02401C616BFFF722FB56E371 +:10198000626BC1F34401491E1268CA4002F00101B2 +:1019900041F08001DAE738780528BDD18DF82000C4 +:1019A000686A0D90B8680A90ADF824A08DF830B040 +:1019B000042100F8011B102204F15C0112F0F8FB75 +:1019C000002108A8FFF790FB2078092801D01320F8 +:1019D00044E70A2020709BE5E078C10742D0A17D52 +:1019E000012902D0022927D038E0617808A801290E +:1019F00016D004F16C010091D4E9061204F15C03E5 +:101A0000001DFFF7BBFA0A20287003268DF82080FE +:101A1000686A0D90002108A8FFF766FBDDE2C3E2CB +:101A200004F15C010091D4E9062104F16C03001D6E +:101A3000FFF7A4FA0026E9E7C0F3440114290DD208 +:101A40004FF0006101EBB0104FEAB060E0706078D9 +:101A5000012801D01020BEE40620FFE660780128AE +:101A60003FF4B7AC0A2051E5E178C90708D0A17D61 +:101A7000012903D10B20287004202FE028702DE0CD +:101A80000E2028706078616B012817D004F15C0388 +:101A900004F16C020EA8FFF7E1FA2046FFF748FBBD +:101AA000A0780EAEC0F11001304412F000FC062008 +:101AB0008DF82000686A09960D909AE004F16C0395 +:101AC00004F15C020EA8FFF7C9FAE9E739780229A8 +:101AD00003D139790029D1D029758FE28DF8200002 +:101AE000686A0D9058E538780728F6D1D4E90921BD +:101AF0006078012808D004F16C00CDE90002029161 +:101B000005D104F16C0304E004F15C00F5E704F195 +:101B10005C0304F14C007A680646216AFFF764F919 +:101B20006078012821D1A078216A0A18C0F110013B +:101B3000104612F0BCFBD4E90923606B04F12D01BF +:101B40008DE80F0004F15C0304F16C0231460EA82D +:101B500000E055E2FFF7CAF910220EA904F13C009B +:101B600012F0FAFA08B10B20AFE485F8008000BF4C +:101B70008DF82090686A0D908DF824A00CE53878D7 +:101B80000528AAD18DF82000686A0D90B8680A90DF +:101B9000ADF824A08DF830B080F80080617801297C +:101BA0001AD0D4E9093204F12D01A66B03920096F4 +:101BB000CDE9011304F16C0304F15C0204F14C0162 +:101BC000401CFFF793F9002108A8FFF78DFA607811 +:101BD000012805D0152041E6D4E90923611DE4E779 +:101BE0000E20287006208DF82000686ACDF824B0F9 +:101BF0000D90A0788DF82800CEE438780328C0D165 +:101C0000E079C00770D00F202870072066E7387889 +:101C100004286BD11422391D04F1140012F00DFBBD +:101C2000616A208CA1F80900616AA078C871E17925 +:101C3000626A01F003011172616A627A0A73616A71 +:101C4000A07A81F82400162060E485F800A08DF8C1 +:101C50002090696A50460D9190E00000A447020070 +:101C60003878052842D1B868A8616178606A02298D +:101C700001D0012100E0002101EB4101142606EB17 +:101C8000C1014058082102F024F86178606A0229F5 +:101C900001D0012100E0002101EB410106EBC1016F +:101CA000425802A8E169FFF70DFA6078626A0228DB +:101CB00001D0012000E0002000EB4001102000EBEB +:101CC000C1000223105802A90932FEF7F1FF626A2F +:101CD000FD4B0EA80932A169FFF7E3F96178606A4C +:101CE000022904D0012103E042E18BE0BDE00021A4 +:101CF00001EB4101182606EBC101A27840580EA95C +:101D000012F056FA6178606A022901D0012100E0E0 +:101D1000002101EB410106EBC1014058A1780844C4 +:101D2000C1F1100112F0C3FA05208DF82000686A95 +:101D30000D90A8690A90ADF824A08DF830B0062166 +:101D400001706278616A022A01D0012200E000225B +:101D500002EB420206EBC202401C8958102212F02C +:101D600027FA002108A8FFF7BFF91220C5F818B01C +:101D700028708DF82090686A0D900B208DF8240053 +:101D80000AE43878052870D18DF82000686A0D9033 +:101D9000B8680A900B20ADF824000A98072101705A +:101DA0006178626A022901D0012100E0002101EB83 +:101DB0004103102101EBC30151580988A0F801101B +:101DC0006178626A022902D0012101E02FE100213D +:101DD00001EB4103142101EBC30151580A6840F89B +:101DE000032F4968416059E01920287001208DF8BF +:101DF000300077E6162028708DF830B0002108A852 +:101E0000FFF772F9032617E114202870B0E638783E +:101E100005282AD18DF82000686A0D90B8680A90CC +:101E2000ADF824A08DF830B080F800906278616A37 +:101E30004E46022A01D0012200E0002202EB4202BB +:101E40001C2303EBC202401C8958102212F0B0F987 +:101E5000002108A8FFF748F9152028708DF82060A8 +:101E6000686A0D908DF824603CE680E0387805289B +:101E70007DD18DF82000686A0D90B8680A90ADF8A1 +:101E800024900921017061690978490841706169EC +:101E900051F8012FC0F802208988C18020781C28C1 +:101EA000A8D1A1E7E078C00702D04FF0060C01E00E +:101EB0004FF0070C607802280AD04FF0000000BFF6 +:101EC00000EB040101F1090105D04FF0010004E02D +:101ED0004FF00100F4E74FF000000B78204413EAC4 +:101EE0000C030B7010F8092F02EA0C02027004D1E7 +:101EF0004FF01B0C84F800C0D2B394F801C0BCF1C1 +:101F0000010F00D09BB990F800C0E0465FEACC7C9E +:101F100004D028F001060670102606E05FEA887CEF +:101F200005D528F00206067013262E70032694F8B5 +:101F300001C0BCF1020F00D092B991F800C05FEA75 +:101F4000CC7804D02CF001060E70172106E05FEA71 +:101F50008C7805D52CF002060E7019212170002610 +:101F60000078D0BBCAB3C3BB1C20207035E012E0A0 +:101F700002E03878062841D11A2019E42078012897 +:101F80003CD00C283AD02046FFF7F0F809208DF815 +:101F90002000686A0D9031E03878052805D00620C9 +:101FA000387003261820287046E005218DF820108F +:101FB000686A0D90B8680A900220ADF824000120EC +:101FC0008DF830000A980170297D4170394608A8C3 +:101FD000FFF78AF8064618202870012E0ED02BE055 +:101FE00001208DF82000686A0D9003208DF82400F0 +:101FF000287D8DF8250085F814B012E0287D80B189 +:102000001D202070172028708DF82090686A0D9090 +:1020100002208DF82400394608A8FFF765F8064627 +:102020000AE00CB1FE2020709DF8200020B10021B4 +:1020300008A8FFF759F810E413B03046BDE8F08F58 +:102040002DE9F04387B00C464E6900218DF804104D +:1020500001202578034602274FF007094FF0050CB1 +:1020600085B1012D53D0022D39D1FE2030708DF86D +:102070000030606A059003208DF80400207E8DF802 +:10208000050063E02179012925D002292DD00329FB +:1020900028D0042923D1B17D022920D131780D1F08 +:1020A000042D04D30A3D032D01D31D2917D1218905 +:1020B000022914D38DF80470237020899DF8041030 +:1020C00088421BD2082001E09C4702008DF80000E6 +:1020D000606A059057E070780128EBD0052007B0C2 +:1020E000BDE8F0831D203070E4E771780229F5D156 +:1020F00031780C29F3D18DF80490DDE7083402F82B +:1021000004CB94E80B0082E80B000320E7E7157886 +:10211000052DE4D18DF800C0656A05959568029596 +:102120008DF8101094F80480B8F1010F13D0B8F1B5 +:10213000020F2DD0B8F1030F1CD0B8F1040FCED18F +:10214000ADF804700E202870207E6870002168466B +:10215000FEF7CAFF0CE0ADF804700B202870207E5B +:10216000002100F01F0068706846FEF7BDFF377061 +:102170000020B4E7ADF804708DF8103085F800C089 +:10218000207E6870277011466846FEF7ADFFA6E70F +:10219000ADF804902B70207F6870607F00F0010024 +:1021A000A870A07F00F01F00E870E27F2A71C007CE +:1021B0001CD094F8200000F00700687194F821000A +:1021C00000F00700A87100216846FEF78DFF28681F +:1021D000F062A8883086A87986F83200A069407835 +:1021E00070752879B0700D203070C1E7A9716971E0 +:1021F000E9E700B587B004280CD101208DF8000074 +:102200008DF80400002005918DF805000146684610 +:10221000FEF76AFF07B000BD70B50C46054602F038 +:1022200031F821462846BDE870407823002201F0AD +:102230007FBF08B1007870470C20704770B50C0064 +:1022400005784FF000010CD021702146F3F701F81A +:1022500069482178405D884201D1032070BD022089 +:1022600070BDF2F7F6FF002070BD0279012A05D09B +:1022700000220A704B78012B02D003E00420704743 +:102280000A758A6102799300521C0271C1500320C1 +:102290007047F0B587B00F4605460124287905EB55 +:1022A000800050F8046C7078411E02290AD252490D +:1022B0003A46083901EB8000314650F8043C284684 +:1022C000984704460CB1012C11D12879401E10F01A +:1022D000FF00287101D00324E0E70A208DF80000F8 +:1022E000706A0590002101966846FFF7A7FF032C4E +:1022F000D4D007B02046F0BD70B515460A46044656 +:1023000029461046FFF7C5FF064674B12078FE281F +:102310000BD1207C30B100202870294604F10C003C +:10232000FFF7B7FF2046FEF721FF304670BD70472C +:1023300070B50E4604467C2111F0DBFF0225012E0C +:1023400003D0022E04D0052070BD0120607000E093 +:1023500065702046FEF70AFFA575002070BD28B104 +:10236000027C1AB10A4600F10C01C5E70120704752 +:1023700010B5044686B0042001F084FF2078FE28C2 +:1023800006D000208DF8000069462046FFF7E7FFE1 +:1023900006B010BD7CB50E4600218DF804104178C2 +:1023A000012903D0022903D0002405E0046900E0DC +:1023B00044690CB1217C89B16D4601462846FFF77E +:1023C00054FF032809D1324629462046FFF794FFDF +:1023D0009DF80410002900D004207CBD04F10C05F8 +:1023E000EBE730B40C460146034A204630BC034BB1 +:1023F0000C3AFEF756BE0000E04702009C47020080 +:1024000070B50D46040011D085B12101284611F0A8 +:102410004EFF10224E49284611F0CAFE4C480121B9 +:102420000838018044804560002070BD012070BDE7 +:1024300070B5474E00240546083E10E07068AA7B40 +:1024400000EB0410817B914208D1C17BEA7B914271 +:1024500004D10C22294611F07FFE30B1641C308873 +:102460008442EBDB4FF0FF3070BD204670BD70B58D +:102470000D46060006D02DB1FFF7DAFF002803DB7A +:10248000401C14E0102070BD314C083C208862884C +:10249000411C914201D9042070BD6168102201EBFA +:1024A0000010314611F084FE2088401C20802870E6 +:1024B000002070BD70B514460D0018D0BCB10021CD +:1024C000A170022802D0102811D105E0288870B12F +:1024D0000121A170108008E02846FFF7A9FF00281D +:1024E00005DB401CA070A8892080002070BD012061 +:1024F00070BD70B5054614460E000BD0002030703C +:10250000A878012808D005D91149A1F108010A8845 +:1025100090420AD9012070BD24B128782070288803 +:10252000000A5070022008700FE064B14968102260 +:1025300001EB00112046103911F03AFE2878207383 +:102540002888000A607310203070002070BD0000E1 +:102550007C0000202DE9F04190460C4607460025FE +:10256000FE48072F00EB881607D2DFE807F00707C1 +:10257000070704040400012500E0FFDF06F81470DB +:10258000002D13D0F548803000EB880191F827002A +:10259000202803D006EB4000447001E081F826407B +:1025A00006EB44022020507081F82740BDE8F081FE +:1025B000F0B51F4614460E460546202A00D1FFDF1F +:1025C000E649E648803100EB871C0CEB440001EB48 +:1025D0008702202E07D00CEB460140784B784870DC +:1025E000184620210AE092F82530407882F825002C +:1025F000F6E701460CEB410005704078A142F8D1A6 +:1026000092F82740202C03D00CEB4404637001E0C7 +:1026100082F826300CEB41042023637082F82710E7 +:10262000F0BD30B50D46CE4B44190022181A72EB9E +:10263000020100D2FFDFCB48854200DDFFDFC94841 +:102640004042854200DAFFDFC548401C844207DA79 +:10265000002C01DB204630BDC148401C201830BD95 +:10266000BF48C043FAE710B504460168407ABE4A45 +:1026700052F82020114450B10220084420F07F403D +:10268000F0F779FA94F90810BDE81040C9E7042082 +:10269000F3E72DE9F047B14E803696F82D50DFF87C +:1026A000BC9206EB850090F8264034E009EB8517D4 +:1026B0004FF0070817F81400012806D004282ED080 +:1026C00005282ED0062800D0FFDF01F0E3F80146F0 +:1026D00007EB4400427806EB850080F8262090F84E +:1026E0002720A24202D1202280F82720084601F0AC +:1026F000DCF82A4621460120FFF72CFF9B48414683 +:1027000000EB041002682046904796F82D5006EB27 +:10271000850090F82640202CC8D1BDE8F087022023 +:1027200000E003208046D0E710B58C4C2021803497 +:1027300084F8251084F8261084F82710002084F8E7 +:10274000280084F82D0084F82E10411EA16044F862 +:10275000100B2074607420736073A0738449E07759 +:1027600020750870487000217C4A103C02F8110066 +:10277000491CC9B22029F9D30120F0F7EAF800205A +:10278000F0F7E7F8012084F82200F9F7D1FA794848 +:10279000F9F7DDFA764CA41E20707748F9F7D7FADE +:1027A0006070BDE81040F0F761B810B5F0F783F83D +:1027B0006F4CA41E2078F9F7E3FA6078F9F7E0FA95 +:1027C000BDE8104001F09EB8202070472DE9F34F7E +:1027D000624E0025803606EB810A89B09AF8250002 +:1027E000202822D0691E02916049009501EB00105B +:1027F0008146D0E90112C0680391CDE90420B08B75 +:10280000ADF81C00B07F8DF81E009DF81500C8B112 +:102810000227554951F820400399E219114421F04B +:102820007F41019184B102210FE00120F0F791F87E +:102830000020F0F78EF8F0F75CF801F063F886F806 +:102840002F50A0E00427E4E700218DF8181002289B +:1028500001D0012820D10398391901440998081A98 +:102860009DF81C1020F07F4001B1022133318142DC +:102870000BD203208DF815000398C4F13201401AE1 +:1028800020F07F40322403900CE096F8240018B921 +:10289000F0F782FB00284CD0322C03D214B101F0A7 +:1028A00025F801E001F02EF8314A107818B393466C +:1028B0005278039B121B00219DF81840984601286E +:1028C0001AD0032818D000208DF81E00002A04DD3D +:1028D000981A039001208DF818009DF81C0000B193 +:1028E00002210398254A20F07F40039003AB09980A +:1028F00001F014F810B110E00120E5E79DF81D008B +:1029000018B99BF80000032812D08DF81C50CDF8A0 +:102910000C808DF818408DF81E509DF8180058B1A5 +:1029200003980123C11900221846F0F765F806E064 +:1029300000200BB0BDE8F08F0120F0F70AF899F9FC +:102940000C20012300200199F0F756F8012086F8A9 +:102950002F008AF828502022694611E098080020AC +:10296000FF7F841E0020A107F04702009806002088 +:102970008E000020DF3F010093260100FFFF3F0093 +:10298000F94811F05AFC0120D3E72DE9F05FDFF898 +:10299000D883064608EB860090F82550202D1FD0DE +:1029A000A8F180002C4600EB8617A0F50079DFF82F +:1029B000BCB305E0A24607EB4A004478202C0AD0BD +:1029C000F0F766F809EB04135A4601211B1D00F0CD +:1029D000A5FF0028EED0AC4202D0334652461EE09E +:1029E000E34808B1AFF30080F0F752F898F82F20D1 +:1029F0006AB1D8F80C20411C891A0902CA1701EBE8 +:102A000012610912002902DD0020BDE8F09F314665 +:102A1000FFF7DCFE08B10120F7E733462A46202104 +:102A20000420FFF7C5FDEFE72DE9F041CE4C256905 +:102A3000F0F72EF8401B0002C11700EB11600012E6 +:102A400000D4FFDF94F8220000B1FFDF012784F8F3 +:102A5000227094F82E00202800D1FFDF94F82E6019 +:102A6000202084F82E00002584F82F5084F8205070 +:102A700084F82150BF4825600078022833D003280D +:102A800031D000202077A068401C05D04FF0FF30E7 +:102A9000A0600120EFF75DFF0020EFF75AFFF0F78D +:102AA00058F8F0F750F8EFF724FF10F0D7FDB248D0 +:102AB000056005604FF0E0214FF40040B846C1F8D2 +:102AC0008002F0F7E0F894F82D703846FFF75DFFCC +:102AD0000028FAD0A448803800EB871010F81600C0 +:102AE000022802D006E00120CCE73A463146062013 +:102AF000FFF730FD84F8238004EB870090F8260070 +:102B0000202804D09B48801E4078F9F73FF9207FA9 +:102B1000002803D0F0F70DF82577657746E50146E4 +:102B2000914810B590F82D200024803800EB8210D9 +:102B300010F814302BB1641CE4B2202CF8D3202000 +:102B400010BD8E4800EB0410016021460120FFF704 +:102B500001FD204610BD10B5012801D0032800D189 +:102B600071B3814A92F82D307F4C0022803C04EBF7 +:102B7000831300BF13F812400CB1082010BD521C83 +:102B8000D2B2202AF6D37B4A48B1022807D00729BF +:102B900016D2DFE801F01506080A0C0E100000211D +:102BA0000AE01B2108E03A2106E0582104E07721E1 +:102BB00002E0962100E0B52151701070002010BD98 +:102BC000072010BD6B4810B54078EFF7D4FF80B2F6 +:102BD00010BD10B5202811D2634991F82D30A1F114 +:102BE000800202EB831414F810303BB191F82D30C1 +:102BF00002EB831212F81020012A01D0002010BD30 +:102C000091F82D2001460020FFF7A4FC012010BD03 +:102C100010B5EFF73DFFBDE81040EFF7ACBF2DE971 +:102C2000F0410E46504F01782025803F0C4607EBBF +:102C3000831303E0254603EB45046478944202D0F5 +:102C4000202CF7D108E0202C06D0A14206D103EBBE +:102C500041014978017007E00020A7E403EB44003C +:102C600003EB450140784870454F7EB127B1002104 +:102C700040F2DA30AFF300803078A04206D127B1BD +:102C8000002140F2DD30AFF30080357027B1002124 +:102C900040F2E230AFF30080012087E410B54268D3 +:102CA0000B689A1A1202D41702EB1462121216D48D +:102CB000497A91B1427A82B9324A006852F82110B9 +:102CC000126819441044001D891C081A0002C1171B +:102CD00000EB11600012322801DB012010BD002042 +:102CE00010BD2DE9F04781461F48244E00EB8100BE +:102CF000984690F825402020107006F50070154683 +:102D000000EB81170BE000BF06EB04104946001DE5 +:102D1000FFF7C4FF28B107EB44002C704478202C47 +:102D2000F2D1297888F8001013E000BF06EB0415F3 +:102D3000291D4846FFF7B2FF68B988F80040A97B13 +:102D400099F80A00814201D80020E6E407EB44002C +:102D50004478202CEAD10120DFE42DE9FC410E4625 +:102D600007460024054D18E018090020FFFF3F002A +:102D7000000000008E00002000F5004098060020B2 +:102D800000000000F04702009DF8000005EB001075 +:102D90008168384600F0D6FD01246B4601AA314611 +:102DA0003846FFF79EFF0028EED02046BDE8FC81A4 +:102DB00070B50446FF480125A54300EB841100EBE4 +:102DC0008510402211F0F4F9FB4E26B1002140F2AB +:102DD0005C40AFF30080F748803000EB850100EBEA +:102DE0008400D0F82500C1F8250026B100214FF459 +:102DF0008C60AFF30080284670BD2DE9FC4184460D +:102E0000EC481546089C00EB85170E4617F8140091 +:102E1000012803D0022801D00020C7E70B46E74A6B +:102E20000121604600F07AFDA8B101AB6A4629464F +:102E30003046FFF756FF70B1DE489DF804209DF83C +:102E40000010803000EB85068A4208D02B46052012 +:102E5000FFF7AEFB0BE02A462146042014E02029B0 +:102E600003D007EB4100407801E096F8250007EB1E +:102E7000440148709DF80000202809D007EB40006D +:102E800044702A4621460320FFF764FB01208DE7AA +:102E900006F8254F0120F070F3E7C94901EB001057 +:102EA000001DFFF7E0BB7CB51D46134604460E46E9 +:102EB00000F1080221461846EFF76AFE94F908006F +:102EC0000F2804DD1F3820722068401C206096B156 +:102ED0000220BC4951F82610461820686946801B1C +:102EE00020F07F40206094F908002844C01C1F286F +:102EF00003DA012009E00420EBE701AAEFF748FE1E +:102F00009DF8040010B10098401C009000992068C2 +:102F100031440844C01C20F07F4060607CBD2DE936 +:102F2000FE430C46064609786079907220799846EF +:102F30001546507241B19F48803090F82E102029DC +:102F40000AD00069401D0BE0D4E90223217903B0C7 +:102F50002846BDE8F043A6E79B484178701D084429 +:102F600020F07F47217900222846A368FFF79BFFC6 +:102F70003946284600F0E6FCD4E902322179684659 +:102F8000FFF791FF41462846019CFFF7E6FE2B46DE +:102F900022460021304600F0C1FC002803D1314612 +:102FA000284600F0CFFCBDE8FE832DE9FE4F8146A8 +:102FB00000F084FC30B1002799F8000020B1002017 +:102FC000BDE8FE8F0127F7E77A4D7B4C4FF0000AF2 +:102FD000803524B1002140F2D340AFF3008095F852 +:102FE0002D8085F823A0002624B100214FF49B609A +:102FF000AFF300801FB94046FFF7DAFE804624B1E8 +:1030000000214FF49C60AFF30080EFF741FD434691 +:103010006A464946FFF783FF24B1002140F2E640AB +:10302000AFF3008095F82E0020280CD02969009875 +:10303000401A0002C21700EB1260001203D5684666 +:1030400000F080FC012624B100214FF49E60AFF314 +:10305000008095F823000028BBD124B1002140F264 +:10306000F640AFF30080EFF713FD6B46534A0021A3 +:1030700000F054FC0028A3D027B941466846FFF76A +:103080006CFE064326B16846FFF7EDFAC9F8080062 +:1030900024B1002140F20950AFF3008001208FE7F6 +:1030A0002DE9FF5F8A46814600F008FC414C8034E0 +:1030B00010B39AF80000002710B1012800D0FFDFFC +:1030C0003D4D25B1002140F27F50AFF3008001203B +:1030D000A84600905FEA080604D0002140F287501D +:1030E000AFF30080009800F0E0FB94F82D50002032 +:1030F00084F8230067B119E094F82E0001272028F6 +:1031000000D1FFDF9AF800000028D9D0FFDFD7E711 +:103110002846FFF74DFE054626B1002140F29150AA +:10312000AFF3008094F823000028D3D126B100210A +:1031300040F29B50AFF30080EFF7AAFC83462B468A +:1031400001AA5146FFF7EBFE5FEA060804D0002112 +:1031500040F2A250AFF300803B462A4601A95846F0 +:10316000CDF80090FFF749FE064604EB850090F885 +:1031700028B0B8F1000F04D0002140F2A950AFF3FD +:10318000008000F087FB0090B8F1000F04D0002110 +:1031900040F2AF50AFF3008094F82300002899D19B +:1031A000B8F1000F04D0002140F2B750AFF3008017 +:1031B00003490BE09808002000000000FFFF3F00DB +:1031C00098060020F04702008E00002001EB091055 +:1031D0000DF1040C00F104009CE80E0080E80E00E4 +:1031E0004EB35FEA080604D0002140F2C450AFF3AA +:1031F00000803BEA070012D094F82E0020280ED160 +:1032000026B1002140F2C950AFF300802846FFF7F5 +:10321000BCFB20B99AF80000D8B3012849D0B8F116 +:10322000000F04D0002140F2E650AFF300802846A2 +:1032300000F029FB01265FEA080504D0002140F2D6 +:10324000EF50AFF30080009800F02FFB25B1002174 +:1032500040F2F350AFF300808EB194F82D0004EBF0 +:10326000800090F82600202809D025B1002140F2E6 +:10327000FA50AFF30080F9484078F8F787FD25B1A0 +:10328000002140F2FF50AFF3008004B03046BDE8AB +:10329000F09FFFE7B8F1000F04D0002140F2D150B9 +:1032A000AFF3008094F82D2049460420FFF752F92F +:1032B000C0E7002E3FF40EAF002140F2DC50AFF328 +:1032C000008007E72DE9F84FE54D814695F82D0080 +:1032D0004FF00008E34C4FF0010B474624B10021AA +:1032E00040F20D60AFF30080584600F0DEFA85F83A +:1032F000237024B1002140F21260AFF3008095F8F2 +:103300002D00FFF755FD064695F8230028B1002C47 +:10331000E4D000214FF4C3604BE024B1002140F21F +:103320001C60AFF30080CE48803800EB861111F8A6 +:103330001900032856D1334605EB830A4A469AF80A +:103340002500904201D1012000E0002000900AF108 +:1033500025000021FFF763FC01460098014203D0DD +:1033600001228AF82820AF77E1B324B1002140F28E +:103370002160AFF30080324649460120FFF7EAF8AA +:103380009AF828A024B1002140F22C60AFF300800D +:1033900000F080FA834624B1002140F23160AFF39F +:1033A000008095F8230038B1002C97D0002140F21E +:1033B0003560AFF3008091E7BAF1000F07D095F8C0 +:1033C0002E00202803D13046FFF7DFFAE0B124B108 +:1033D000002140F24960AFF30080304600F053FA1C +:1033E0004FF0010824B1002140F25260AFF3008099 +:1033F000584600F05AFA24B1002140F25660AFF36B +:1034000000804046BDE8F88F002CF1D0002140F24A +:103410004460AFF30080E6E70020EFF773BA0120C5 +:10342000EFF770BA8D48007870472DE9F0418C4C69 +:1034300094F82E0020281FD194F82D6004EB860705 +:1034400097F82550202D00D1FFDF8549803901EB09 +:10345000861000EB4500407807F8250F0120F87032 +:1034600084F82300294684F82E5032460220223464 +:10347000FFF770F8002020700FE42DE9F0417A4E3C +:10348000774C012538B1012821D0022879D00328B2 +:103490007DD0FFDFF0E700F029FAFFF7C6FF207EBE +:1034A00000B1FFDF84F821500020EFF752FAA16845 +:1034B000481C04D0012300221846EFF79DFA14F8A7 +:1034C0002E0F217806EB01110A68012154E0FFF765 +:1034D000ACFF0120EFF73DFA94F8210050B1A0684D +:1034E000401C07D014F82E0F217806EB01110A6852 +:1034F000062141E0207EDFF86481002708F1020800 +:10350000012803D002281ED0FFDFB5E7A777EFF729 +:1035100010FB98F80000032801D165772577607DBE +:10352000524951F8200094F8201051B948B161680F +:103530000123091A00221846EFF75EFA02202076CE +:103540009AE7277698E784F8205000F0CFF9A07F1B +:1035500050B198F8010061680123091A0022184649 +:10356000EFF74AFA257600E0277614F82E0F217837 +:1035700006EB01110A680021BDE8F041104700E0A8 +:1035800005E036480078BDE8F041F8F7FFBBFFF7EB +:103590004CFF14F82E0F217806EB01110A68052163 +:1035A000EAE710B52E4C94F82E00202800D1FFDF5A +:1035B00014F82E0F21782C4A02EB01110A68BDE89D +:1035C0001040042110477CB5254C054694F82E0088 +:1035D000202800D1FFDFA068401C00D0FFDF94F856 +:1035E0002E00214901AA01EB0010694690F90C0058 +:1035F0002844EFF7CDFA9DF904000F2801DD0120E2 +:1036000000E00020009908446168084420F07F41F0 +:10361000A16094F82100002807D002B00123BDE882 +:10362000704000221846EFF7E7B97CBD30B5104A6C +:103630000B1A541CB3EB940F1ED3451AB5EB940F21 +:103640001AD3934203D9101A43185B1C14E0954215 +:1036500010D9511A0844401C43420DE08C00002050 +:10366000180900200000000098060020F047020022 +:10367000FF7F841EFFDF0023184630BD0123002298 +:1036800001460220EFF7B8B90220EFF762B9EFF771 +:10369000FFB92DE9FC47B14C054694F82E002028CF +:1036A00000D1FFDF642D58D3AD4A0021521B71EBCE +:1036B000010052D394F82E20A0462046DFF8A492B1 +:1036C00090F82D7009EB0214D8F8000001AA2844E4 +:1036D0006946EFF75DFA9DF90400002802DD0098C5 +:1036E000401C0090A068009962684618B21A22F047 +:1036F0007F42B2F5800F30D208EB8702444692F841 +:103700002520202A0AD009EB02125268101A000262 +:10371000C21700EB1260001288421EDBA068401C3A +:1037200010D0EFF7B5F9A168081A0002C11700EB35 +:1037300011600012022810DD0120EFF70AF94FF0A6 +:10374000FF30A06020682844206026F07F40206180 +:10375000012084F82300BDE8FC870020FBE72DE969 +:10376000F0477E4C074694F82D00A4F1800606EB46 +:10377000801010F8170000B9FFDF94F82D50A04614 +:10378000794C24B1002140F66500AFF3008040F68B +:10379000710940F67A0A06EB851600BF16F8170085 +:1037A000012818D0042810D005280ED006280CD0E7 +:1037B0001CB100214846AFF3008020BF002CEDD0A3 +:1037C00000215046AFF30080E8E72A463946012041 +:1037D000FEF7C0FEF2E74FF0010A4FF00009454640 +:1037E00024B1002140F68100AFF30080504600F084 +:1037F0005CF885F8239024B1002140F68600AFF3F1 +:10380000008095F82D00FFF7D3FA064695F82300BF +:1038100028B1002CE4D0002140F68C001FE024B138 +:1038200000214FF40960AFF3008005EB860000F142 +:10383000270133463A462630FFF7F1F924B100213B +:1038400040F69400AFF3008000F024F8824695F82B +:10385000230038B1002CC3D0002140F69A00AFF30A +:103860000080BDE785F82D60012085F823005046D3 +:1038700000F01BF8002C04D0002140F6A700AFF3A5 +:103880000080BDE8F087354981F82D00012081F8DE +:103890002300704710B5354808B1AFF30080EFF34F +:1038A000108000F0010072B610BD10B5002804D1E0 +:1038B0002F4808B1AFF3008062B610BD2D480068F4 +:1038C000C005C00D10D0103840B2002806DA00F054 +:1038D0000F0000F1E02090F8140D03E000F1E0206B +:1038E00090F80004400970470820704710B51B4C41 +:1038F00094F82400002804D1F8F72AF8012084F86D +:10390000240010BD10B5154C94F82400002804D0F4 +:10391000F8F747F8002084F8240010BD10B51C68A3 +:103920005B68241A181A24F07F4420F07F40A142DB +:1039300006D8B4F5800F03D2904201D8012010BD03 +:10394000002010BDD0E90032D21A21F07F4311448B +:1039500021F07F41C0E900317047000018090020C4 +:10396000FF1FA107980600200000000000000000D3 +:103970000000000004ED00E02DE9F041044680075E +:103980004FF000054FF001060CD560480560066059 +:103990000FF0C6FC20B15E48016841F4806101600F +:1039A00024F00204E0044FF0FF3705D55948466083 +:1039B000C0F8087324F48054600003D556480560AD +:1039C00024F08044E0050FD55448C0F80052C0F8F8 +:1039D000087353490D60091D0D60514A04210C32D2 +:1039E0001160066124F48074A00409D54D48466036 +:1039F000C0F80052C0F808734B48056024F4005426 +:103A0000C4F38030C4F3C031884200D0FFDF14F427 +:103A1000404F14D045484660C0F80873444886605B +:103A2000C0F80052C0F8087342490D600A1D1660C4 +:103A30008660C0F808730D60166024F440442005C9 +:103A40000AD53D4846608660C0F80873C0F84873E0 +:103A50003A48056024F400640FF0DAFD3848044267 +:103A600000D0FFDFBDE8F08170B5202500221346AD +:103A700020FA02F1C90719D051B201F01F06012442 +:103A8000B4404E09B60006F1E026C6F88041C6F8FB +:103A90008042002906DA01F00F0101F1E02181F8EE +:103AA000143D03E001F1E02181F80034521CAA42E8 +:103AB000DED370BD70B5234C0D462060FFF75CFF70 +:103AC0002068FFF7D1FF2846F8F71FF80FF0FAF942 +:103AD00000F0AFF80FF09CFD0FF0E7FCF8F728F9C5 +:103AE000BDE870400FF09CBA10B5164C2068FFF787 +:103AF00043FF2068FFF7B8FF0FF08AFDF8F794F84E +:103B00000020206010BD0A2070470000FC1F00400C +:103B10003C17004000C0004004E501400080004028 +:103B20000485004000D0004004D5004000E0004083 +:103B300000F0004000F5004000B0004008B5004033 +:103B4000FEFF0FFD9000002070B526490A680AB3F9 +:103B50000022154601244B685B1C4B60092B00D3E7 +:103B60004D600E7904FA06F30E681E420FD0EFF393 +:103B7000108212F0010272B600D001220C689C4340 +:103B80000C6002B962B649680160002070BD521C29 +:103B9000092AE0D3052070BD4FF0E0214FF48000EA +:103BA000C1F800027047EFF3108111F0010F72B6F7 +:103BB0004FF0010202FA00F20A48036842EA0302E7 +:103BC000026000D162B6E7E706480021016041606B +:103BD00070470121814003480068084000D001205F +:103BE00070470000940000202DE9F04115460E4674 +:103BF0000446002700F0E7F8A84215D3002341202F +:103C00000FE000BF94F84220A25CF25494F84210F6 +:103C1000491CB1FBF0F200FB12115B1C84F842104E +:103C2000DBB2AB42EED3012700F0D9F83846BDE84D +:103C3000F081704910B5802081F800046E490020A1 +:103C400081F8420081F84100433181F8420081F857 +:103C50004100433181F8420081F8410067480FF08C +:103C60006DFB6648401C0FF069FBEFF71BF8BDE8E1 +:103C7000104000F0B4B8402070475F4800F0A3B88F +:103C80000A4601465C48AFE7402070475A48433037 +:103C900000F099B80A46014657484330A4E740214E +:103CA00001700020704710B504465348863000F07C +:103CB0008AF82070002010BD0A4601464E4810B513 +:103CC0008630FFF791FF08B1002010BD42F20700D7 +:103CD00010BD70B50C460546412900D9FFDF4848A4 +:103CE0000068103840B200F050F8C6B20D2000F065 +:103CF0004CF8C0B2864203D2FFDF01E0EFF722F8B2 +:103D0000224629463C48FFF76FFF0028F6D070BDD9 +:103D10002DE9F041394F002506463F1D57F8254053 +:103D2000204600F041F810B36D1CEDB2032DF5D321 +:103D30003148433000F038F8002825D02E4800F0F4 +:103D400033F8002820D02C48863000F02DF80028C9 +:103D50001AD0EEF7CDFF29480FF0F8FAB0F5005F62 +:103D600000D0FFDFBDE8F04124480FF005BB94F818 +:103D700041004121265414F8410F401CB0FBF1F2E0 +:103D800001FB12002070D3E751E7002806DA00F0AB +:103D90000F0000F1E02090F8140D03E000F1E020A6 +:103DA00090F800044009704710F8411F4122491C57 +:103DB000B1FBF2F302FB13114078814201D10120E3 +:103DC00070470020704710F8411F4078814201D3AE +:103DD000081A02E0C0F141000844C0B2704710B5B3 +:103DE00006480FF0B3FA002803D1BDE81040EEF703 +:103DF0006ABF10BD0DE000E0480900209C000020D3 +:103E000004ED00E070B5154D2878401CC4B2687808 +:103E1000844202D0EFF727F82C7070BD2DE9F041F5 +:103E20000E4C4FF0E02600BFEFF712F820BF40BF66 +:103E300020BF677820786070D6F80052EDF76EFAF0 +:103E4000854305D1D6F8040210B92078B842EBD0EA +:103E5000EEF7F9FF0020BDE8F0810000AC00002083 +:103E60002DE9F041012528034FF0E0210026C1F89B +:103E700080011E4CC4F800610C2000F02CF81C4896 +:103E800001680268C94341F3001142F01002026068 +:103E9000C4F804532560491C00E020BFD4F8002179 +:103EA000002AFAD019B9016821F010010160114807 +:103EB00007686560C4F80853C4F800610C2000F07E +:103EC0000AF83846BDE8F08110B50446FFF7C8FF90 +:103ED0002060002010BD00F01F0201219140400928 +:103EE000800000F1E020C0F88012704700C0004060 +:103EF00010ED00E008C500402DE9F047FF4C0646F4 +:103F0000FF21A06800EB061211702178FF2910D064 +:103F10004FF0080909EB011109EB06174158C05988 +:103F200000F0F4F9002807DDA168207801EB061104 +:103F300008702670BDE8F08794F8008045460DE0D3 +:103F4000A06809EB05114158C05900F0DFF90028BD +:103F500006DCA068A84600EB08100578FF2DEFD11D +:103F6000A06800EB061100EB08100D700670E1E789 +:103F7000F0B5E24B0446002001259A680C269B7898 +:103F80000CE000BF05EB0017D75DA74204D106EB9C +:103F90000017D7598F4204D0401CC0B28342F1D8D9 +:103FA000FF20F0BD70B5FFF772FBD44C08252278D6 +:103FB000A16805EB0212895800F0A8F9012808DD74 +:103FC0002178A06805EB01114058BDE87040FFF76B +:103FD00055BBFFF727FABDE87040F7F7D7BE2DE9CC +:103FE000F041C64C2578FFF752FBFF2D6ED04FF005 +:103FF0000808A26808EB0516915900F087F9022815 +:10400000A06801DD80595DE000EB051109782170A1 +:10401000022101EB0511425C5AB1521E42548159F2 +:1040200001F5800121F07F4181512846FFF764FFAF +:1040300034E00423012203EB051302EB051250F8D0 +:1040400003C0875CBCF1000F10D0BCF5007F10D915 +:10405000CCF3080250F806C00CEB423C2CF07F4C2D +:1040600040F806C0C3589A1A520A09E0FF21815449 +:104070000AE0825902EB4C3222F07F428251002248 +:1040800042542846FFF738FF0C21A06801EB0511C8 +:104090004158E06850F82720384690472078FF289C +:1040A00014D0FFF7F4FA2278A16808EB0212454613 +:1040B000895800F02BF9012893DD2178A06805EBE1 +:1040C00001114058BDE8F041FFF7D8BABDE8F081D2 +:1040D000F0B51D4614460E460746FF2B00D3FFDF02 +:1040E000A00700D0FFDF8548FF210022C0E902477A +:1040F000C57006710170427082701046012204E0A2 +:1041000002EB0013401CE154C0B2A842F8D3F0BD4A +:1041100070B57A4C064665782079854200D3FFDF7A +:10412000E06840F825606078401C6070284670BDEB +:104130002DE9FF5F1D468B460746FF24FFF7A7FAD0 +:10414000DFF8B891064699F80100B84200D8FFDFC1 +:1041500000214FF001084FF00C0A99F80220D9F81D +:1041600008000EE008EB0113C35CFF2B0ED0BB422E +:1041700005D10AEB011350F803C0DC450CD0491CF3 +:10418000C9B28A42EED8FF2C02D00DE00C46F6E709 +:1041900099F803108A4203D1FF2004B0BDE8F09FD4 +:1041A0001446521C89F8022008EB04110AEB041291 +:1041B000475440F802B00421029B0022012B01EB7E +:1041C00004110CD040F801204FF4007808234FF080 +:1041D000020C454513D9E905C90D02D002E045504E +:1041E000F2E7414606EB413203EB041322F07F4233 +:1041F000C250691A0CEB0412490A81540BE005B94C +:10420000012506EB453103EB041321F07F41C1503A +:104210000CEB0411425499F800502046FFF76CFE55 +:1042200099F80000A84201D0FFF7BCFE3846B4E779 +:1042300070B50C460546FFF72AFA06462146284681 +:10424000FFF796FE0446FF281AD02C4D082101EBFB +:104250000411A8684158304600F058F800F5805025 +:10426000C11700EBD14040130221AA6801EB0411F1 +:10427000515C09B100EB4120002800DC012070BD39 +:10428000002070BD2DE9F04788468146FFF770FE9B +:104290000746FF281BD0194D2E78A86831463446B2 +:1042A00005E0BC4206D0264600EB06121478FF2C2F +:1042B000F7D10CE0FF2C0AD0A6420CD100EB011084 +:1042C00000782870FF2804D0FFF76CFE03E0002080 +:1042D00030E6FFF7D9F941464846FFF7A9FF012329 +:1042E000A968024603EB0413FF20C854A878401EB7 +:1042F000B84200D1A87001EB041001E0140A0020BC +:1043000001EB061100780870104613E6081A000247 +:10431000C11700EB116000127047000070B5044631 +:10432000A0F500002D4EB0F1786F02D23444A4F510 +:1043300000042B48844201D2012500E0002500F052 +:1043400043F848B125B9B44204D32648006808E0D0 +:10435000012070BD002070BD002DF9D1B442F9D309 +:1043600021488442F6D2F3E710B50446A0F50000D8 +:10437000B0F1786F03D219480444A4F5000400F0AA +:1043800023F84FF0804130B11648006804E08C42B9 +:1043900004D2012003E014488442F8D2002080F0C7 +:1043A000010010BD10B520B1FFF7DEFF08B10120FC +:1043B00010BD002010BD10B520B1FFF7AFFF08B150 +:1043C000012010BD002010BD08480949006888423E +:1043D00001D101207047002070470000000000203C +:1043E000006002002000002008000020B000002033 +:1043F000BEBAFECA0548064A0168914201D10021B1 +:10440000016004490120086070470000B0000020EE +:10441000BEBAFECA40E50140534800210170417018 +:1044200010218170704770B5054616460C46022073 +:10443000EEF7D7F94C49012008704C49F01E08608E +:104440004B480560001F046070BD10B50220EEF7F8 +:10445000C8F945490120087046480021C0F80011FC +:10446000C0F80411C0F8081143494FF40000086077 +:1044700010BD3D480178C9B1404A4FF400011160B8 +:104480003C49D1F800310022002B1CBFD1F8043187 +:10449000002B02D0D1F8081111B14270102103E0B5 +:1044A0000121417036490968817002700020EEF7E1 +:1044B00098B92D480178002904BF407870472D48ED +:1044C000D0F80011002904BF02207047D0F8001175 +:1044D00000291CBFD0F80411002905D0D0F808012C +:1044E000002804BF01207047002070471E4800B517 +:1044F0000278204B4078C821491EC9B282B1D3F856 +:1045000000C1BCF1000F10D0D3F8000100281CBF7F +:10451000D3F8040100280BD0D3F8080150B107E00C +:10452000022802D0012805D002E00029E4D1FFDFF3 +:10453000002000BD012000BD0B480178002904BF08 +:10454000807870470B48D0F8001100291CBFD0F8C4 +:104550000411002902D0D0F8080108B110207047DA +:1045600007480068C0B27047B400002010F5004052 +:1045700008F5004000F0004004F5014008F5014056 +:1045800000F400404C48002101704170704770B544 +:10459000064614460D460120EEF723F9474806600B +:1045A000001D0460001D056070BD70B54249012505 +:1045B0000D7040EA0241424A41F080711160414C65 +:1045C0000026C4F80461404A4FF040711160002891 +:1045D00002BFC4F80052256070BD012818BFFFDF7C +:1045E000C4F8006225604FF000703849086070BD63 +:1045F0003148017879B1344A4FF040711160314946 +:10460000D1F804210021002A08BF417002D0304AAD +:104610001268427001700020EEF7E3B82648017876 +:10462000002904BF407870472648D0F804010028CC +:1046300008BF704726480068C0B27047002808BF0E +:10464000704730B51C480078002808BFFFDF1D48C0 +:10465000D0F80411002918BF30BD0224C0F804436B +:10466000DFF870C0DCF80010C1F30015DCF80010B2 +:1046700041F01001CCF80010D0F80411002904BF5B +:104680004FF400414FF0E02207D100BFC2F8801282 +:1046900020BFD0F80431002BF8D02DB9DCF8001081 +:1046A00021F01001CCF80010C0F8084330BD0549D6 +:1046B0000120886070470000B700002008F5004026 +:1046C00004F5004000F0004008F5014004F5014009 +:1046D00000F4004010ED00E010B5FF480024012177 +:1046E0004470047044728472C17280F82140846204 +:1046F000446314300FF004FFF849601E0860091D80 +:104700000860091D0C60091D0860091D0C60091D69 +:104710000860091D0860091D0860091D0860091D61 +:104720000860091D0860091D0860091D0860091D51 +:10473000086010BDEA48016801F00F01032904BFB9 +:1047400001207047006800F00F00042804BF022019 +:10475000704700B5FFDF012000BD30B4DE490268BC +:10476000DFF884C34A6142688A61007A08770A7D6B +:10477000DC4BACF1040401204AB10A7E00FA02F2DB +:104780001A608D7D002D0CBF2260CCF800204A7D80 +:10479000002A04BF30BC70474A7E90401860C97D33 +:1047A00000290CBF2060CCF8000030BC704730B549 +:1047B00000250446012904D002290CBF4FF0807562 +:1047C000FFDF45F4847040F48010C849086044F469 +:1047D0004030091D40F00070086030BD30B5002544 +:1047E0000446012904D002290CBF4FF08075FFDF79 +:1047F00045F4847040F48010BC49086044F44030B3 +:10480000091D40F000700860B948D0F80001002888 +:1048100018BFFFDF30BD2DE9F04102264FF0E02741 +:1048200001240025C7F88061B248056004600EF0DD +:1048300077FDB14918B1086840F4806008600868E5 +:1048400020F0770040F0880040F0004008600EF053 +:1048500051FD30B1A948016821F47F4141F4B051C4 +:1048600001600EF047FD9C4940B1A5484E770660B7 +:10487000A54AA4481060121FA4481060A44A40F240 +:104880005B601060121F40F203101060101F046084 +:10489000934A032010609F4A96201060487F0028AA +:1048A00014BF4FF4C0209C4840F440209B4A106045 +:1048B0009C4A9B481060121F9B481060C7F880629A +:1048C0008B4A1020C2F8040381F82D50BDE8F08116 +:1048D0009648016821F0010141F080710160704744 +:1048E0007D4A0368C2F802308088D0801172704718 +:1048F000794B10B51A7A8A4208D101460622981CD3 +:104900000FF02AFC002804BF012010BD002010BDBC +:10491000714890F8210070476F4A517010707047CD +:10492000F0B50546800000F1804000F580508B888E +:10493000C0F820360B78D1F8011043EA0121C0F805 +:10494000001605F10800012707FA00F6784C002A46 +:1049500004BF2068B04304D0012A18BFFFDF2068DD +:1049600030432060206807FA05F108432060F0BD5D +:104970000EF096BF584890F82E007047564890F8B1 +:10498000300070476B4AC178116000686A490002C4 +:1049900008607047252808BF02210ED0262808BFCE +:1049A0001A210AD0272808BF502106D00A2894BF10 +:1049B0000422062202EB4001C9B2604A116060493C +:1049C00008607047F0B4444B9D7A012D61D0022DF0 +:1049D0001CBFF0BC704793F815C0BCF1000F04BFBA +:1049E000F0BC70474FF47A7C012D564C564F57D08F +:1049F000DE7D5D7E002E18BF0126012908BF29211A +:104A00000CD0022A0CBF514C012A03D0042A0CBF3F +:104A10003C464F4C04F2E141B1FBFCF1491F084414 +:104A20004C4908604C490020C1F84C01280286F02E +:104A3000010140EA015040F00311187F820002F1A9 +:104A4000804202F5C042C2F81015444901EB8002D1 +:104A5000997EC80000F1804000F5F830C0F81425B8 +:104A6000DFF8FCC0C0F810C5D87EC30003F1804356 +:104A700003F5F833C3F814252B4AC3F81025012297 +:104A800002FA01F102FA00F0084336490860F0BC6E +:104A9000704793F814C0BCF1000FA3D1F0BC70476D +:104AA0009E7D1D7E002E18BF0126012965D0022A99 +:104AB00004BF2D4C4FF47A710CD0012A08BF4FF47B +:104AC000C86107D0042A07BF3C4640F69801274C2E +:104AD00040F6E44121444BE0240A0020000E00404F +:104AE00010150040180500500C050050141500402A +:104AF00000100040FC1F00403C17004040170040E1 +:104B000060150040448000409CF5014028110040A1 +:104B100038150040441500400000040408F5014029 +:104B200040800040A4F5014010110040741700407F +:104B300040160040241500401C1500400815004098 +:104B400054150040A2240200D0FB010004360200EC +:104B5000C0D401004C85004000800040006000404F +:104B60004C81004004F501406836020030D301005A +:104B700001F5FA71B1FBFCF150E7022A08BF4FF4CE +:104B80007A710AD0012A08BF4FF4C86105D0042AFF +:104B90000CBF40F6980140F6E44149F6FC6211442E +:104BA000E8E72DE9F047FC4E80460320154689468C +:104BB000C6F80002F94F787F002814BF4FF4C020D8 +:104BC000F748F849086048460EF0A5FE28460EF062 +:104BD00095FE0124B8F1000F03D0B8F1010F16D0F3 +:104BE00018E00EF087FB78B1EF490A684806022DFD +:104BF000D0F820030CBFC0F30660C0F3062022F4F7 +:104C0000FE4242EA00200860BC72346002E00220EA +:104C1000B8727460E548C464E54800682A464946AD +:104C2000BDE8F047CEE62DE9F0418846DA4907466F +:104C300003201546C1F80002D84C607F002814BF3D +:104C40004FF4C020D648D74E306040460EF063FE89 +:104C500028460EF053FE17B1012F1CD024E00EF0B1 +:104C600049FB78B1D04A11685006022DD0F82003D4 +:104C70000CBFC0F30660C0F3062021F4FE4141EAF8 +:104C8000002010600120A072606B40F4801060630F +:104C90004FF4801007E00220A072606B40F4001017 +:104CA00060634FF4001030602A464146BDE8F04191 +:104CB000002087E62DE9FF4FB74C8346002581B0E1 +:104CC00003208946C4F80002B44E707F002814BF48 +:104CD0004FF4C020B248B34F386003980EF01BFE6B +:104CE00004980EF00BFEDFF8CCA24FF00108BBF1E8 +:104CF000000F03D0BBF1010F35D046E00EF0FAFAF9 +:104D000080B1A94A0498116853060228D3F82003F9 +:104D10000CBFC0F30660C0F3062021F4FE4141EA57 +:104D200000201060CAF8004096F82D00012806D037 +:104D3000022818BFFFDF0CD086F80A8025E0DDE9E5 +:104D4000031396F82C2048460EF066FEB16A45180B +:104D5000F2E7DDE9031296F82C3048460EF0EAFD42 +:104D6000B16A4518E8E79448CAF8000096F82D00A3 +:104D7000DDE90313012896F82C20484624D00EF0D4 +:104D800095FEB16A45180220B0728C4805608D49C5 +:104D90008B480860706B40F400207063D4F8009278 +:104DA0004FF0100AC4F808A30026C4F80062864831 +:104DB0004FF4802BC0F800B0FF208DF80000C4F83D +:104DC0001061C4F810800AE00EF0F2FDB16A4518D7 +:104DD000D9E700BF9DF80000401E8DF800009DF847 +:104DE000000018B1D4F810010028F3D09DF800009D +:104DF000002808BFFFDFC4F80061C4F80C61C4F8E4 +:104E00001061C4F80461C4F81461C4F818610EF0AC +:104E100071FA002818BFC4F828616C480068009037 +:104E2000C4F80092C7F800B0C4F804A34FF40020FF +:104E300038605E48C0F84C805D480068A84228BFD2 +:104E4000FFDF2846DDE9031205B0BDE8F04FB9E504 +:104E50002DE9F84F504CD4F8000220F00B09D4F89B +:104E600004034FF0100AC0F30018C4F808A300268A +:104E7000C4F80062494D687F002814BF4FF4C02079 +:104E8000474840F4402150480160A97A0127012990 +:104E900002D0022903D014E0297D11B911E0697D07 +:104EA00079B1A97EEA7E07FA01F107FA02F211430D +:104EB0000160287F800000F1804000F5C040C0F80C +:104EC0001065FF208DF80000C4F81061276104E030 +:104ED0009DF80000401E8DF800009DF8000018B1FC +:104EE000D4F810010028F3D09DF80000002808BF76 +:104EF000FFDFC4F810610EF0FDF9002818BFC4F8F8 +:104F000028616E72AE72EF72C4F80092B8F1000FB1 +:104F100018BFC4F804A3BDE8F88F00682C4920F03E +:104F20007F40086070474FF0E0200221C0F88011F8 +:104F3000C0F8801270474FF0E0210220C1F8000154 +:104F4000704724490870704723490860704730B59E +:104F5000124C0546A06AA84228BFFFDF012020733B +:104F60002561607F40B1284420610B48D0F80012D1 +:104F700041F04001C0F800120C490020C1F8440182 +:104F8000164920690860606B064940F48000606340 +:104F90004FF48000086030BD00100040240A00205B +:104FA0000000040404F50140881500400080004022 +:104FB0004C850040ACF5014004100040488500409D +:104FC00048810040A8F5014008F501401811004053 +:104FD0003C150040B9000020041500404485004005 +:104FE00070B505460E460220FE4C2073FE4801684F +:104FF00001F00F01032908BF012207D0006800F06B +:105000000F0004280EBF0222FFDF012294F82D00BA +:1050100094F82C10012819D028460EF0A5FD206127 +:10502000607F48B1216908442061F048D0F800123F +:1050300041F04001C0F80012ED490020C1F84401E0 +:105040002169A06A0844EB49086070BD33462846D0 +:105050000EF053FDE3E7E8494FF480000860E148B3 +:10506000416B21F480014163002101737047C2004C +:1050700002F1804202F5F832E04BC2F81035C2F876 +:10508000141501218140DE480160D648426B11436E +:1050900041637047D64801214160C1600021C0F8DA +:1050A0004411D4480160CF488162704710B504466E +:1050B0000EF020F900281CBFCA484477D14804608C +:1050C000CA48D0F8001241F04001C0F8001210BDEB +:1050D000C64810B5D0F8001221F04001C0F8001207 +:1050E0000EF008F9C749002818BF0220086010BD5B +:1050F000BE48D0F8001221F01001C0F800120121C2 +:1051000081617047B9480021C0F81C11D0F8001225 +:1051100041F01001C0F800127047B44981B0D1F8D5 +:105120001C21012A1EBF002001B07047B64A126838 +:1051300002F07F02524202700020C1F81C01B34805 +:1051400000680090012001B0704730B50C000546A2 +:1051500008BFFFDF14F0010F1CBF012CFFDF002D83 +:105160000CBF012002209F4901284872CC729F4940 +:1051700004BFD1F8000240F0040007D0022807BFA6 +:10518000D1F8000240F00800FFDF30BDC1F8000296 +:1051900030BD2DE9F84FDFF8789299F80000042827 +:1051A00028BFFFDFDFF848A2DAF84C1192488D4C97 +:1051B00000274FF00108D1B1A17A012902D00229BC +:1051C00003D014E0217D11B911E0617D79B1A17E98 +:1051D000E27E08FA01F108FA02F211430160217F30 +:1051E000890001F1804101F5C041C1F81075824884 +:1051F000616B01606763217B002019B1DAF844110B +:10520000012900D00021A27A784E012A6ED0022A0C +:1052100074D000BFD6F8101101290CBF1021002155 +:1052200041EA00057B48016811F0FF0F03D0D6F872 +:105230001411012900D0002184F82E10006810F00C +:10524000FF0F03D0D6F81801012800D0002084F801 +:105250002F007148006884F83000FFF72AF9012810 +:1052600018BF002084F83100C6F80071C6F80C7130 +:10527000C6F81071C6F80471C6F81471C6F8187132 +:105280000EF038F8002818BFC6F828716348006887 +:1052900000905748C0F8447161480068DFF854A195 +:1052A0000090DAF800006062617F00291CBF401A9C +:1052B00060625C480068A0624B48016801F00F0121 +:1052C000032908BF012007D0006800F00F00042860 +:1052D0000EBF0220FFDF012084F82C00A07ADFF847 +:1052E00048B184F82D00022824D116E0D6F80C012C +:1052F000012814BF002008208CE7FFE7D6F80C0136 +:10530000012814BF00200220484A1268012A14BF55 +:1053100004220022104308437CE7607850B1DBF898 +:10532000001009780840217831EA000008BF84F8AD +:10533000208001D084F8207015F0020F07D099F872 +:1053400000103B4A4908606A52F82110884715F05E +:10535000010F18BF00210DD0364A99F80030A06A1D +:1053600052F82320904700BF99F8000010F0010F79 +:105370002AD10AE015F0020F18BF0121ECD115F077 +:10538000080F18BF0221E7D1EEE7DBF80000007834 +:1053900000F00F00072828BF84F8217014D2DBF832 +:1053A0000000062200F10901A01C0EF0D5FE40B954 +:1053B000207ADBF800100978B0EBD11F08BF01207C +:1053C00000D0002084F82100E17A002011F0020FC3 +:1053D0001CBF15F0020F15F0040F45D111F0100F8E +:1053E0002AE00000240A00201015004000100040B0 +:1053F000008000404485004008F501400411004051 +:1054000004F5014060150040481500401C110040A3 +:10541000B900002040160040101400401811004050 +:1054200044810040408500400415004000140040C5 +:1054300008480200504802001CBF94F82F20002AA0 +:1054400002D094F831207AB111F0080F1CBF94F803 +:105450002020002A08D111F0040F02D094F8211066 +:1054600011B115F0010F00D00120617A19B198B186 +:10547000FFF7EEFC1EE0607F002814BF4FF4C02150 +:105480007F4980480160D6F8000220F00300C6F88A +:10549000000284F80B800DE04FF0000B012913D0BF +:1054A000022918BFFFDF21D0A06A01225844002141 +:1054B000FFF788FA15F0010F2BD0734899F8001008 +:1054C00050F82100804745E0D6F8000220F00400A3 +:1054D000C6F80002677284F80B80012384F80A8002 +:1054E0001A46002196200EF025FA10E0D6F80002A8 +:1054F00020F00800C6F80002677284F80B800220D2 +:10550000A07201231A46002196200EF051FA83461C +:10551000CAE715F0020F08D05C4999F8002028EA84 +:10552000950051F82210884714E015F0080F06D0B6 +:10553000574899F8001050F8210080470AE015F00C +:10554000100F08BFFFDF05D0524899F8001050F83F +:1055500021008047A07A022818BFBDE8F88F207B81 +:10556000002808BFBDE8F88F4B49C1F844710228F4 +:1055700014D0012818BFFFDFA16A2069884298BFB4 +:10558000FFDF2069CAF80000606B444940F48000E6 +:1055900060634FF480000860BDE8F88F2169A06A5D +:1055A0000844EFE738B500253D4C002818BFC4F883 +:1055B0000052C4F80051C4F80C51C4F81051C4F89A +:1055C0000451C4F81451C4F818510DF093FE00288A +:1055D00018BFC4F8285133480068009038BD01282E +:1055E00004BF28207047022804BF1820704700B568 +:1055F000FFDF282000BD012804BF41F6A4707047DA +:10560000022804BF41F28830704700B5FFDF41F641 +:10561000A47000BD012804BF41F2D4707047022875 +:1056200004BF41F20400704700B5FFDF41F2D470BF +:1056300000BD012812BF02280020704700B5FFDF1F +:10564000002000BD16490820C1F800021648407F1E +:10565000002814BF4FF4C02009480A4908601449C3 +:1056600012480860091D13480860091D12480860A7 +:10567000091D1248086009494FF44020086070472E +:105680000000040408F50140104802002048020010 +:1056900030480200404802000080004004F501400C +:1056A0000010004018110040240A002000110040A2 +:1056B000A0F50140141000401C11004010100040E3 +:1056C00010B53F4822210EF0F2FD3D48017821F04F +:1056D00010010170012107F017FC3A49002081F800 +:1056E00022004FF6FF70888437490880488010BD3B +:1056F000704734498A8C824218BF7047002081F875 +:1057000022004FF6FF70888470472D490160704772 +:105710002D49088070472B498A8CA2F57F43FF3BB7 +:1057200003D0002101600846704791F822202549E6 +:10573000012A1ABF0160012000207047214901F1B0 +:10574000220091F82220012A04BF00207047012284 +:1057500002701D4800888884104670471A494880A6 +:1057600070471849184B8A8C5B889A4206D191F889 +:105770002220002A1EBF01600120704700207047D0 +:105780001048114A818C5288914209D14FF6FF711D +:10579000818410F8221F19B1002101700120704787 +:1057A000002070470748084A818C5288914205D1F1 +:1057B00090F8220000281CBF00207047012070478D +:1057C000820A00205C0A0020BA0000207047574A75 +:1057D000012340B1012818BF70471370086890601A +:1057E00088889081704753700868C2F802008888E2 +:1057F000D08070474D4A10B1012807D00EE0507894 +:1058000060B1D2F802000860D08804E0107828B1B6 +:105810009068086090898880012070470020704758 +:10582000424910B1012803D006E0487810B903E0DE +:10583000087808B1012070470020704730B58DB05E +:105840000C4605460D2104A80EF053FDE0788DF8B6 +:105850001F0020798DF81E0060798DF81D002868E2 +:10586000009068680190A8680290E8680390684614 +:105870000DF0C2FB20789DF82F1088420CD1607883 +:105880009DF82E10884207D1A0789DF82D108842EF +:1058900002BF01200DB030BD00200DB030BD30B5CD +:1058A0000C4605468DB04FF0030104F1030012B120 +:1058B000FEF7F0F901E0FEF70CFA60790D2120F017 +:1058C000C00040F04000607104A80EF012FDE078C6 +:1058D0008DF81F0020798DF81E0060798DF81D006D +:1058E0002868009068680190A8680290E8680390B2 +:1058F00068460DF081FB9DF82F0020709DF82E006A +:1059000060709DF82D00A0700DB030BD10B500295D +:1059100004464FF0060102D0FEF7BCF901E0FEF7A5 +:10592000D8F9607920F0C000607110BDBE00002081 +:1059300070B5F84E0446306890F800110025012932 +:1059400019D090F8FA10012924D090F8D01001292C +:105950002AD090F8F21001291CBF002070BD65709C +:1059600017212170D0F8F4106160B0F8F81021818F +:1059700080F8F25016E065701C212170D0F80111FA +:105980006160D0F80511A16090F80911217380F8C9 +:10599000005107E0657007212170D0F8FC106160AC +:1059A00080F8FA50012070BD65701421217000F15B +:1059B000D2012022201D0EF0FBFB01212172306854 +:1059C00080F8D050D448B0F8D420A0F8FC207268F9 +:1059D000537B80F8FE3080F8FA101088FBF71AF934 +:1059E000FAF7C1FDDEE7CB48006890F8D010002937 +:1059F00014BFB0F8D4004FF6FF70704770B5C54CB7 +:105A00002068002808BFFFDF0025206845700028B7 +:105A100008BFFFDF2068417800291CBFFFDF70BD91 +:105A20004FF486710EF065FC2068FF2101707F2124 +:105A300080F8361013214184282180F8CC100121F0 +:105A400080F8B81080F8BD50FFF742FBFEF711FD5B +:105A5000B24806F0E5FFB24806F0E2FFBDE870404C +:105A6000B04806F0DDBFAB490968097881420CBF38 +:105A7000012000207047A748006890F82200C0F37A +:105A8000001070472DE9F04FA248016891F82400FA +:105A9000B1F822C0C0F38002C0F340031A4400F002 +:105AA00001001044CCF300121AB3BCF1130F1BD049 +:105AB0000BDCBCF1100F02BF9B4931F81000BDE8B0 +:105AC000F08FBCF1120F0FD00AE0BCF1150F08BF28 +:105AD00096490AD0BCF11D0F04BF9548BDE8F08F70 +:105AE000FFDF0020BDE8F08F924931F81000BDE8DB +:105AF000F08F002491F8BA2091F8BB108E4E8F4F92 +:105B00001CF0030F4FF47A7B4FF0190A25464FF42F +:105B1000C8784FF4BF794FF018037DD01CF0010F07 +:105B20001BD0082904BF44464FF0400C0FD0042975 +:105B300004BF4C464FF0100C09D0022907BF05F1F5 +:105B400018044FF0040C05F128044FF0080C0CEB7E +:105B50004C0E0EEB0C1CA44417E0082904BFC446ED +:105B600040240CD0042904BFCC46102407D00229BD +:105B700007BF05F1180C042405F1280C082404EBD8 +:105B8000C40404EB44040CEB440C022A04BF6C4E26 +:105B90004FF47A740CD0012A08BF4FF4C86407D0C0 +:105BA000042A07BF674E40F698043E4640F6E44498 +:105BB000344404F2E734B4FBFBF4C0EB001606EB0C +:105BC000860604EB8604082A30D0042A29D0022A4B +:105BD00007BF05F11802042505F128024FF0190A44 +:105BE00018BF08251AFB052212FB0040082922D005 +:105BF000042925D0022904BF0421C03004D0282361 +:105C000003F5A87108440821C1EBC10101EB410172 +:105C100003EB4101084400E017E0604400F52674FE +:105C200018E04A464FF0140A1025DBE742464FF0D1 +:105C3000140A4025D6E74346402100F53D60E3E7DE +:105C40004B46102100F57C70DEE71CF0020F18BFF8 +:105C5000FFDF02D02046BDE8F08F022A04BF384E95 +:105C60004FF47A7C0CD0012A08BF4FF4C86C07D0DF +:105C7000042A07BF334E40F6980C3E4640F6E44CEB +:105C8000B4440CF2E73CBCFBFBFCC0EB001404EB9F +:105C900084040CEB840C082A04BF4FF0140A402241 +:105CA0000CD0042A29D0022A07BF05F118080422C3 +:105CB00005F128084FF0190A18BF08221AFB0282C2 +:105CC00012FB00C0082904BF4FF4A87340210AD07A +:105CD000042904BF4FF4A873102104D002290EBF79 +:105CE000042128230821C1EBC10101EB410103EB91 +:105CF0004101084400F5B274ACE7C8464FF0140AFD +:105D00001022DBE7034840F271210068806A4843B3 +:105D100070470000CC000020A40A0020B00B002037 +:105D2000D80B0020000C0020744802007C480200C0 +:105D3000F18913006C480200A224020030D3010054 +:105D400068360200D0FB0100F848006890F8350082 +:105D5000002818BF0120704710B5F54C207B0228A1 +:105D600018BF032808D1207D04F1150105F018FDA6 +:105D700008281CBF012010BD207B002816BF022868 +:105D800000200120BDE81040FFF74ABDE74909683F +:105D900081F8300070472DE9F047E44D2968087B11 +:105DA000002816BF02280020012048730E31FFF79B +:105DB00021FD2968087B022816BF03280122002242 +:105DC00081F82F20082081F82D00487B012600272C +:105DD00001F10E03012804BF5B7913F0C00F0AD054 +:105DE00001F10E03012804D1587900F0C0004028C9 +:105DF00001D0002000E0012081F82E00002A04BF1D +:105E000091F8220010F0040F06D0087D153105F03E +:105E1000C7FC296881F82D0028684760FCF7F8FE68 +:105E20002968C34C4FF00009886094F82D0005F0F4 +:105E3000D3FC804694F82F00002818BFB8F1000F5B +:105E400004D01021404606F050FB68B194F83000B1 +:105E500000281CBF94F82E0000281DD0607B04F1A0 +:105E60000E0101280ED012E066734A4604F10E01BD +:105E70004046FFF714FD94F82D1004F10E0005F0D4 +:105E8000A4FD09E0487900F0C000402831D039462F +:105E900004F10E00FFF73AFD2868C77690F822005B +:105EA00010F0040F08BFBDE8F087002794F82D001C +:105EB00005F09BFC040008BFBDE8F087102106F048 +:105EC00014FB002818BFBDE8F08728683A4600F1A7 +:105ED0001C01C6762046FFF7E2FC286800F11C0191 +:105EE000944806F0D4FDBDE8F0470121914806F042 +:105EF000E9BD05F0A3FD4A4604F10E01FFF7CFFC12 +:105F0000CAE778B58A490446884D407B08732968FA +:105F1000207808706088ADF8000080B200F00102BF +:105F2000C0F3400342EA4302C0F3800342EA830223 +:105F3000C0F3C00342EAC302C0F3001342EA0312F3 +:105F4000C0F3401342EA4312C0F3801042EA8010CB +:105F50004884E07D012808BF012603D0022814BF31 +:105F6000FFDF0226286880F8BA60607E012808BF3B +:105F7000012603D0022814BFFFDF0226286880F81C +:105F8000BB60217B80F82410418C1D290CBF0021AF +:105F900061688162617D80F83510A17B002916BFA0 +:105FA0000229002101210175D4F80F10C0F8151045 +:105FB000B4F81310A0F81910A17EB0F8CE2061F348 +:105FC0000302A0F8CE20E17E012918BF002180F84D +:105FD0003410002078BD55480068408CC0F3001193 +:105FE00019B110F0040F05D002E010F0020F01D03B +:105FF00000207047012070474C4A00231268C2F805 +:10600000C030B2F822C0BCF11D0F02BFC2F8C830C8 +:1060100082F8C4307047002908BFC2F8C8300AD0DF +:10602000936A40F2712C03FB0CF31944491EB1FB37 +:10603000F3F1C2F8C81082F8C400704703463B4829 +:1060400010B50168D1F8C820002A1ABFD1F8C0C025 +:10605000BCF1000F012405D09A4205D90124D01AC1 +:10606000C1F8C800204610BD91F82210002411F09C +:10607000010F1CBF406800884FF0430108BF00209B +:1060800001F009F9EEE72948006890F8B700002808 +:106090000CBF01200020704770B51F2834BF044694 +:1060A0001F240022214D286880F8B920224678302C +:1060B0000EF07EF82868012180F8974080F8B9102A +:1060C00070BD10B51F2828BF1F20C2B2174C002377 +:1060D000206880F8B83080F8B72098300EF068F863 +:1060E0002168012081F8B80010BD1049096881F8C5 +:1060F000BD0070470D48006890F8220000F00100D4 +:1061000070470A48006890F82200C0F340007047CA +:106110000648006890F82200C0F34010704703481A +:10612000006890F82200C0F3C0007047CC00002047 +:10613000A40A0020B00B002001207047F748006837 +:1061400090F8BB00704770B5FEF7A4FFFEF783FF21 +:10615000FEF77EFEFEF7E7FEF04C2068D0F8C01098 +:10616000491CC0F8C01090F83300002530B1FEF78C +:10617000AFFFFEF77EF9206880F833502068457045 +:1061800090F8C410F9B1D0F8C02091421BD8042077 +:1061900002F050FA206890F8220010F0010F0CD0A5 +:1061A00060684321008801F076F860680088FAF79B +:1061B00031FDBDE87040FAF7C7B9BDE87040432132 +:1061C000002001F068B8D0F8C81019B1D0F8C0208C +:1061D000914202D990F83700D8B1042002F02AFA8F +:1061E000206890F8220010F0010F0CD060683C216C +:1061F000008801F050F860680088FAF70BFDBDE8F0 +:106200007040FAF7A1B9BDE870403C21002001F0D0 +:1062100042B8BDE87040002002F00CBA2DE9F84FFA +:10622000BE4E8046174630688B464FF0000A458CBC +:1062300015F0030F10D015F0010F05F0020005D086 +:10624000002808BF4FF0010A06D004E0002818BF5C +:106250004FF0020A00D1FFDF4FF000094C4615F065 +:10626000010F05F002000BD070B915F0040F0BD030 +:1062700049F00800002F18BF40F0030440D090E020 +:1062800010B115F0040F0DD015F0070F10D015F058 +:10629000010F05F0020036D0002808BF15F0040FEA +:1062A00027D03DE0002F18BF49F0090479D134E030 +:1062B0002FB149F0080415F0200F14D071E03168B7 +:1062C00005F0200291F87700104308BF49F001045F +:1062D00067D049F0180415F0200F62D191F8BA1078 +:1062E00008295AD156E0316891F8BA10082951D1DD +:1062F00053E049F00800002F18BF40F0010450D1CE +:1063000040F010044DE0002818BF15F0040F07D02E +:10631000002F18BF49F00B0443D149F0180440E0A6 +:1063200015F0030F3CD115F0040F39D077B1316867 +:1063300049F0080091F8BA1008290CBF40F0020497 +:1063400020F0020415F0200F22D02AE0316805F079 +:10635000200291F87700104308BF49F0030420D0D1 +:1063600049F0180015F0200F09D000BF91F8BA10BD +:10637000082914BF40F0020420F0020411E091F853 +:10638000BA20082A14BF40F0010020F00100EDE718 +:10639000082902D024F0010403E044F0010400E0E5 +:1063A000FFDF15F0400F18BFFFDFA8F8009098F846 +:1063B0000000072120F0200088F80000404606F089 +:1063C00034FB5146404606F033FD2146404606F078 +:1063D00038FD14F0010F0CD03068062300F10E01D7 +:1063E0000022404606F00AFD3068417B404606F038 +:1063F0005CFB14F0020F1BD03068BBF1000F0BD018 +:1064000000F11C0106230122404606F0F7FC0121A1 +:10641000404606F057FB0BE000F115010623012270 +:10642000404606F0EBFC3068017D404606F04AFB32 +:1064300014F0040F18BFFFDF14F0080F17D0CDF8C9 +:1064400000903068BDF800100223B0F8CE000209B9 +:1064500062F30B01ADF800109DF80110032260F308 +:1064600007118DF801106946404606F0C7FC012F60 +:1064700016D1306890F8770090B1404606F0D4FC11 +:106480003368401CC0B293F87710C0F125008142F8 +:10649000B8BF084682B203F15801404606F0FFFC3F +:1064A0000020002818BFFFDF0020002818BFFFDFF2 +:1064B0000020002818BFFFDFBDE8F88F2DE9F84362 +:1064C000164C2068002808BFFFDF2068417811BB08 +:1064D0000178FF291FD0002780F83170877080F87D +:1064E00037703846FEF72DFDFEF795F9206890F9D4 +:1064F000BD00FEF73DFA0A48FEF744FA0948FEF7E8 +:106500000CFD206890F8240010F0010F0CD025201D +:10651000FEF740FA10E00C20BDE8F883CC00002024 +:10652000684802006548020010F0020F18BF2620DC +:1065300068D000BFFEF72EFA206890F8BA10252028 +:10654000FEF735F9206880F82C70FEF7F4FC20681F +:10655000002190F8BA200846FEF765FB0F210520C0 +:10656000FEF7DAF92068FF4D012690F82E10002979 +:1065700001BF90F82F10002990F8220010F0040FAE +:1065800070D0FCF745FB8046206841468068FDF7E7 +:106590004DF8F54990FBF1F901FB190041424046E5 +:1065A000FCF73FF80146206881604168494441603A +:1065B00005F0F3F801462068426891426DD8C0E9C1 +:1065C00001784FF0010895F82D0005F005F9814696 +:1065D00095F82F00002818BFB9F1000F04D0102142 +:1065E000484605F082FFA0B195F8300000281CBF96 +:1065F00095F82E00002824D0687B05F10E010128B3 +:1066000015D019E010F0040F14BF2720FFDF91D13F +:1066100092E732466E7305F10E014846FFF73FF9E7 +:1066200095F82D1005F10E0005F0CFF909E0487935 +:1066300000F0C000402816D0414605F10E00FFF7DB +:1066400065F9206890F8220010F0040F25D095F825 +:106650002D0005F0CAF85FEA00081ED0102105F0F1 +:1066600044FF40B119E005F0E9F9324605F10E01A9 +:10667000FFF715F9E5E72068324600F11C01C67600 +:106680004046FFF70CF9206800F11C01B74806F0FE +:10669000FEF90121B54806F015FA2068417B0E305D +:1066A000FEF71EF9206890F8B81079B390F8B7207B +:1066B00080F8772000F1980158300DF0BEFD206879 +:1066C00090F82210C1F30011E9B9B0F8CE00022110 +:1066D0000609ADF800606846FDF7DCFA28B1BDF8A0 +:1066E0000000C0F30B00B04204D1BDF80000401C14 +:1066F000ADF800002168BDF80000B1F8CE2060F3CD +:106700000F12A1F8CE20206880F8B870206890F8A9 +:10671000B91059B190F8972080F8572000F178010E +:1067200038300DF08AFD206880F8B9702068B0F824 +:10673000CE10D0F8C020090951FA82F190F8BC209F +:10674000DFF82CC2114463460022E1FB0C3212092F +:106750006FF0240302FB031180F8BC1090F82210A4 +:10676000824E90F81B80C1F3001106F12809002920 +:106770005DD03780317821F020013170408C1328B2 +:1067800037D01CDC10284DD0122846D0FFDF00BFC8 +:1067900005F10E01754806F06CF9697B734806F047 +:1067A00084F92068418C1D2918BF15297ED090F8E6 +:1067B000772000F15801304606F0ADF97EE015284B +:1067C00018BF1D28E2D10121304606F02EF930789D +:1067D000B8F1000F40F020003070206812D000F1B6 +:1067E0001C01304606F053F90121304606F06AF9E3 +:1067F000CEE70021304606F018F9307840F020004E +:106800003070C5E700F11501304606F040F9206808 +:10681000017D304606F056F9BAE70621304606F00B +:1068200004F9B5E70221304606F0FFF8B0E7002290 +:1068300041463046FFF7F2FC206890F877100029B7 +:1068400004BF408C10F0010F05D110F0020F08BFFB +:1068500010F0200F04D0012241464846FFF7DEFC2D +:10686000F07810F03F0F1CBF307910F0100F25D0DA +:10687000304606F0D8F82268014692F82400C0F3AA +:106880008003C0F3400C634400F00100034492F81D +:106890002C00C0F38002C0F3400C624400F0010001 +:1068A0001044181AC0B200F00AFD00E006E00090A3 +:1068B000032304226946304606F0A0FA206890F8C7 +:1068C0002200C0F30010B0B12A4E042130463780B8 +:1068D00006F0ABF805F10E01304606F0CAF8697B08 +:1068E000304606F0E2F8206800F1380190F85720B1 +:1068F000304606F034F904F0C5FF03211E4805F0C8 +:1069000054F8216881F83300002005E61B494860EF +:1069100070472DE9F843194C8046206890F83120E3 +:1069200032B1408C1D2808BFFFDFBDE8F8430AE400 +:10693000012639B390F8BC00FEF72CF8206890F8D7 +:10694000BB102520FDF733FF206801224FF496711C +:1069500090F8BB300020FEF7ADF90948FEF7F4FAD5 +:10696000206810E0A40A002040420F00B00B002075 +:1069700053E4B36E000C0020280C0020CC00002053 +:10698000D80B002005E04670867080F83160BDE8C5 +:10699000F883FE48FEF7D8FA2068002590F8241006 +:1069A00090F82C0021EA000212F0010F18BF012517 +:1069B0000ED111F0020F04D010F0020F08BF022513 +:1069C00006D011F0040F03D010F0040F08BF042507 +:1069D0000027B8F1000F5CD0012D1CD0022D08BF9C +:1069E00026201CD0042D14BFFFDF272017D02068DD +:1069F00090F8BA102520FDF7DAFE206890F82210F2 +:106A0000C1F3001171B1002201234FF496711046B9 +:106A1000FEF750F93DE02520FDF7BCFFE7E7FDF765 +:106A2000B9FFE4E790F8BA3001224FF496710020E4 +:106A3000FEF740F9D548C17811F03F0F1CBF00792F +:106A400010F0100F25D0D14805F0EDFF2368014666 +:106A500093F82420C2F38000C2F3400C604402F09B +:106A6000010200EB020C93F82C20C2F38000C2F369 +:106A70004003184402F001020244ACEB0200C0B231 +:106A800000F01DFC0090032304226946BF4806F075 +:106A9000B5F9206890F82C10294380F82C1090F854 +:106AA000242032EA010112D04670408C132821D0F4 +:106AB0001CDC102808BFBDE8F88312281AD000BFDC +:106AC000C0F30010002818BFFFDFBDE8F883418C39 +:106AD0001D2908BF80F82C70E6D0C1F300110029F1 +:106AE00014BF80F8316080F83170DDE7152818BFD9 +:106AF0001D28E5D1BDE8F84301210846FEF725BB76 +:106B0000A34810B50068417841B90078FF2805D046 +:106B100000210846FFF7FDFE002010BDFEF7BAFA7F +:106B2000FEF799FAFEF794F9FEF7FDF90C2010BD77 +:106B300097490120096881F837007047944909682E +:106B400081F83200704770B5002501F0E3FB0028A2 +:106B50007CD08F4C2068417800260122012905D085 +:106B6000022901D003297DD0FFDF70BD8178022684 +:106B700039B390F8220010F0030F67D08548FEF774 +:106B8000E3F920680122962190F8BB301046FEF709 +:106B900091F800219620FEF723FA2068467090F8BD +:106BA000330020B1FDF751FC4020FEF77FFA20684A +:106BB00090F83400002808BF70BDBDE87040FEF7B3 +:106BC000A1BA418CC1F300129AB1102929D090F8D2 +:106BD000330020B1FDF739FC4020FEF767FA6D481D +:106BE000FEF7B2F9206890F8221011F0040F1DD0C2 +:106BF00027E090F8242090F82C309A4211D190F898 +:106C00007700002808BF11F0010F05D111F0020F25 +:106C100008BF11F0200F52D0BDE870400121084696 +:106C200077E6BDE870400021012072E690F835005B +:106C3000012814BF0328102545F00E010020FEF79F +:106C400084FA206890F83400002801E037E009E079 +:106C500018BFFEF757FA00219620FEF7C1F9206809 +:106C6000467070BD817801B3418C11F0010F21D0C5 +:106C700080F8D02090F8D210B0F8D40000F00BFBD0 +:106C800060680088F9F7C6FFF9F75EFC2068467077 +:106C9000FEF700FAFEF7DFF9FEF7DAF8FEF743F940 +:106CA000BDE87040032001F0C5BC8178BDE87040AC +:106CB00001202EE611F0020F04BFFFDF70BDBDE81A +:106CC0007040FFF740BAFFF73EBA10B5304C20686D +:106CD00090F8341049B13630FEF71FFA18B9216820 +:106CE0007F2081F83600FEF703FA206890F8330021 +:106CF00018B1FEF7EDF9FDF7BCFB01F00BFBA8B1F5 +:106D0000206890F82210C1F3001179B14078022870 +:106D100018BFFFDF00210120FFF7FBFD206841784D +:106D200000291EBF40780128FFDF10BDBDE81040DC +:106D3000FFF709BA2DE9F047154F0E4603283A68C8 +:106D4000518C0BD092F8320001F0010410F10009CF +:106D500018BF4FF001094FF0010805E0C1F34004EE +:106D60004FF000094FF00208FDF704FE054634EA33 +:106D7000090008BFBDE8F0873868064C90F833007A +:106D800098B104F064FD3070014605E0B00B0020BE +:106D9000CC000020280C0020FF2806D0E01C04F0C6 +:106DA0004BFD307804F05EFD05432078C0F3801180 +:106DB0003868027D914209D100F115010622E01CDC +:106DC0000DF0CAF9002808BF012000D0002031785A +:106DD000FF2906D0C0B9386890F82D00884215D137 +:106DE00012E098B12078E11CC0F3801004F0D8FCC8 +:106DF000064604F03BFE38B1304604F0F6FC18B10C +:106E0000102105F072FB08B1012000E00020396874 +:106E100091F8221011F0040F01D0F0B11AE0CDB9B1 +:106E2000FE4890F83500002818BF404515D114F8E9 +:106E3000030B2146C0F3801004F0B2FC044604F0BA +:106E400015FE38B1204604F0D0FC18B1102105F031 +:106E50004CFB10B10120BDE8F0870020BDE8F087B1 +:106E60002DE9F04FEE4D804683B02868002740782A +:106E7000022818BFFFDF28687F2490F8341049B13A +:106E80003630FEF74AF9002804BF286880F83640FB +:106E9000FEF72EF9E34805F0E8FD0646B8F1000FCD +:106EA00000F0A381DF4805F079FF002800F09D8104 +:106EB000FDF72EFD002800F098813046D94EFF21C5 +:106EC000DFF864A34FF000084FF0030B4FF0010907 +:106ED000062880F0B981DFE800F0FDFDFD03FD8F9D +:106EE0008DF8001069460320FFF724FF002828686A +:106EF0007CD090F8341011B190F8001159B1286885 +:106F0000807801283ED0C948FEF71EF8286880F82E +:106F100001B000F06EB99DF8003080F80091017862 +:106F200080F80111FF2B10D000F20312511E1846F9 +:106F300004F064FC002808BFFFDF286890F8021105 +:106F400041F0020180F802110DE03178C1F38011A7 +:106F500080F80211B149D1F88721C0F80321B1F8B6 +:106F60008B11A0F80711286800F2091690F8360076 +:106F70007F2808BFFFDF286890F83610317080F84E +:106F80003640BCE7A94CDAF8049004F12806A4F8CE +:106F900000800721204605F048FD0021204605F02D +:106FA00047FF4946204605F04CFF0623002206F124 +:106FB0000901204605F022FF2868417B204605F0A4 +:106FC00074FD286800F1380190F85720204605F03C +:106FD00066FF2046FDF7B8FF28680122962190F849 +:106FE000BB300020FDF766FE90E7FFE780780028C1 +:106FF00040F0FD8000F0F9B88DF8081002A90520D6 +:10700000FFF798FE0028286800F0EA808278884917 +:10701000002A7DD0A1F11F066C6890F8BB90D6F8CD +:107020000F00C4F80E00B6F813006082707D207562 +:10703000B07D6075B6F81700E082B6F81900608080 +:10704000B6F81B00A080B6F81D00E08004F108002F +:107050000DF064FA96F8240000F01F00207696F8F0 +:107060002400400984F86C0184F8549084F8559009 +:10707000286890F8CC1084F8561090F8BD0084F879 +:1070800057009DF80810686800F079F9022001F0B7 +:10709000D1FAA6F12804DAF80090A4F800800821BB +:1070A000204605F0C2FC0021204605F0C1FE4946FD +:1070B000204605F0C6FE6946304605F0EFFC304636 +:1070C00005F009FD0146204605F0EFFC06230022ED +:1070D000694600E0B8E0204605F090FE694630467B +:1070E00005F0CEFC304605F0E9FC0146204605F0EF +:1070F000E9FC062301226946204605F07FFE204672 +:10710000FDF722FF28680122962190F8BB3000E0AD +:1071100006E00020FDF7CEFD286880F801B068E0A9 +:107120006C6832783F4E607BC2F34012104060734F +:10713000D6F80F00C4F80E00B6F813006082707D18 +:107140002075B07D6075B6F81700E082B6F81900BA +:107150006080B6F81B00A080B6F81D00E0804FF0FC +:10716000010A04F108000DF0D9F996F8240000F0A6 +:107170001F00207696F82400400984F86C0184F8FA +:1071800054A084F855A0286890F8CC1084F85610C4 +:1071900090F8BD0084F857009DF80810686800F06A +:1071A000EEF8286880F8D09090F8D210B0F8D400AB +:1071B00000F071F868680088F9F72CFDF9F7C4F958 +:1071C000286880F80180FDF765FFFDF744FFFDF7B3 +:1071D0003FFEFDF7A8FE012001F02CFA09E000BFF8 +:1071E00090F82200C0F3001008B1012701E0FEF77B +:1071F000AAFF286890F8330018B1FDF769FFFDF782 +:1072000038F91FB100210120FFF783FB286841787E +:1072100000291ABF4178012903B00BE0A40A00201D +:10722000CC000020280C002060480200000C002048 +:10723000470C002008BFBDE8F08F4078032818BF36 +:10724000FFDF03B0BDE8F08F286890F82200C0F39C +:1072500000100028CBD0C8E770B5864C06460D4616 +:107260002068807858B1FDF765FA216803463046FA +:1072700091F8BB202946BDE8704001F048BAFDF7FF +:1072800059FA21680346304691F8BA202946BDE8EC +:10729000704001F03CBA784A137882F8F530A2F8D1 +:1072A000F60082F8F410012082F8F20092F8C4008F +:1072B000002818BF92F8C00082F8F800704778B52F +:1072C00004466C4800230093006890F8BA20082A0E +:1072D00004BF4FF4C87240230DD0042A04BF4FF4FA +:1072E000BF72102307D0022A07BF03F1180204233C +:1072F00003F128020823491D01FB032690F8BC2056 +:107300009DF8001062F3050141F040058DF8005032 +:1073100090F8BB00012804BF9DF8020020F0E000B7 +:107320002AD0022818BFFFDF21D000BF25F080003F +:107330008DF80000C4EB041106FB04F001EB8101A1 +:1073400000EB81044D48844228BFFFDF4C48A0FB7E +:107350000410BDF80110000960F30C01ADF8011034 +:10736000BDF800009DF8021040EA014078BD9DF88C +:10737000020020F0E00020308DF80200D6E72DE971 +:10738000F0413C4D04460E46286890F8D000002895 +:1073900018BFFFDF0027286880F8D2702188A0F886 +:1073A000D4106188A0F8EA10A188A0F8EC10E18858 +:1073B000A0F8EE1094F86C1180F8F01090F82F10EF +:1073C00049B1427B00F10E01012A04D1497901F053 +:1073D000C001402935D090F8301041B1427B00F116 +:1073E0000E01012A04BF497911F0C00F29D0DE3007 +:1073F0000DF082F82348FF2E0078C0F380106076ED +:107400001D48D0F88711C4F81A10B0F88B01E0833A +:1074100028681ED0C0F8E410E18BA0F8E81000F155 +:10742000D802511E304604F0E9F9002808BFFFDFFA +:10743000286890F8D71041F0020180F8D710BDE815 +:10744000F081D0F80E10C0F8DE10418AA0F8E210EA +:10745000D0E7C0F8E470A0F8E870617E80F8D7103B +:10746000D4F81A10C0F8D810E18BA0F8DC10BDE8F1 +:10747000F0810000CC000020A40A0020C4BF03005B +:1074800089888888280C0020FE48406870472DE9CC +:10749000F0410F46064601461446012005F098F9D2 +:1074A000054696F85500FEF7A6F8014696F85500F1 +:1074B000022808BFF44807D0012808BFF34803D0CA +:1074C00004280CBFF248F34808444FF47A7100F2E4 +:1074D000E140B0FBF1F0718840F271225143C0EB02 +:1074E0004100001BA0F5597402F0B6FD002818BF3A +:1074F0001E3CAF4234BF28463846A04203D2AF42BA +:107500002CBF3C462C467462BDE8F0812DE9FF4F4C +:107510008FB0044690F855601C98994640EA0900DF +:10752000039094F86500002790460D280CBF0120B9 +:1075300000200990B9F1000F04BF94F80C01032852 +:107540002BD1099848B3B4F88E01404525D1D4F821 +:107550001401C4F80001608840F2E2414843C4F8D5 +:107560000401B4F85A01B4F8E6100844C4F808015C +:10757000204602F07BFDB4F89201E08294F890017D +:107580006075B4F894016080B4F89601A080B4F8F6 +:107590009801E080022084F80C01D4F864010C907A +:1075A000B4F8E6B0B4F85801D4F860A1D4F8541196 +:1075B0000691B9F1000F03D094F8201149B193E07E +:1075C00004F1E00107917431089104F5A075091DDB +:1075D00007E004F59A710791091D089104F5927569 +:1075E000091D0A91B4F85810A8EB0000A8EB01019E +:1075F00009B200B20091002805DAD4F850010690D3 +:1076000001200390084694F80C11002971D001293B +:1076100000F03782022900F05F81032918BFFFDFE5 +:1076200000F0728239460698FAF7FBFF08990126A6 +:1076300040F2712208600A98A0F8008000202870AB +:107640002E7108980068A8606188D4F8140151432D +:10765000C0EB41009049A0F54D70886149698142B5 +:1076600087BF07990860079801600798616A0068FA +:10767000084400F5D270E86002F0EEFC10B1E86852 +:107680001E30E8606E71B4F8D000A0EB080000B2C4 +:107690000028C4BF03206871099800281C9800F0D6 +:1076A000A682C0B1B4F8F81000290CBF0020B4F8CD +:1076B000FA00A4F8FA0094F8FC20401C50438842D9 +:1076C00009D26879401E002805DD6E71B4F8FA0011 +:1076D000401CA4F8FA00B9F1000F00F0AB8294F856 +:1076E0002001002800F0A28213B00220BDE8F08F34 +:1076F000FFE7BAF1000F08BFFFDF94F855106148AB +:1077000090F8280005F079F90C90E18A40F2712098 +:1077100041430C98002200EB41011098002806D04C +:1077200000FB01F15D48B1FBF0F000F10102C4F88B +:107730001021608840F2E24100FB01F210994FF005 +:10774000000006D0554801FB02F1B1FBF0F000F15A +:107750000100C4F8140186B221464FF00100D4F8AC +:1077600028B005F035F8074694F85500FDF743FFBB +:10777000014694F85500022808BF434807D0012865 +:1077800008BF424803D004280CBF41484148084480 +:1077900000F2E1414FF47A70B1FBF0F1608840F201 +:1077A00071225043C1EB4000801BA0F5597602F0D6 +:1077B00053FC002818BF1E3EBB4534BF3846584610 +:1077C000B04203D2BB452CBF5E463E46666294F88B +:1077D0005500FDF72EFF4FF47A7600F2E140B0FB42 +:1077E000F6F000EB0A0794F85500FDF722FF01467A +:1077F00094F85500022808BF234A07D0012808BF83 +:10780000224A03D004280CBF214A224A01EB020B72 +:10781000FDF7F1FE584400F2DB514FF47A70B1FBF2 +:10782000F0F1E08A40F2712242430C98D4F810B192 +:1078300000EB4200401AA0EB0B003844A0F12007F7 +:10784000607D40F2E24110FB01F0049094F8556035 +:107850003046FDF7D0FE0146022E08BF0A4807D089 +:10786000012E08BF094803D0042E0CBF0848094860 +:10787000084400F2E1414FF47A70B1FBF0F000EB04 +:107880004B010DE0500C002004360200A22402003F +:10789000D0FB0100C0D40100D400002040420F0002 +:1078A000049801EB000B3046FDF799FE584400F1B7 +:1078B0006201FD48416194F85500FDF7BAFE00F2FF +:1078C000E1414FF47A70B1FBF0F05044381AB0F552 +:1078D0003D7F38BFFFDFA5E6E08A40F27121D4F892 +:1078E0000421484302EB400210980021002806D0F2 +:1078F00000FB02F1ED48B1FBF0F000F10101C4F82A +:107900001011618840F2E24001FB00F210994FF043 +:10791000000006D0E54801FB02F1B1FBF0F000F1F8 +:107920000100C4F8140186B221464FF00100D4F8DA +:1079300028A004F04DFF074694F85500FDF75BFEC4 +:10794000014694F85500022808BFD94807D00128FD +:1079500008BFD84803D004280CBFD748D7480844EC +:1079600000F2E1414FF47A70B1FBF0F1608840F22F +:1079700071225043C1EB4000801BA0F5597602F004 +:107980006BFB002818BF1E3EBA4534BF3846504630 +:10799000B04203D2BA452CBF56463E466662BBF1A2 +:1079A000000F2ED11C9860B394F855603046FDF757 +:1079B00022FE022E08BFBE4907D0012E08BFBD49D6 +:1079C00003D0042E0CBFBC49BC49084400F2E1417D +:1079D0004FF47A70B1FBF0F0D4F81011E38A084448 +:1079E00040F27121D4F80421594302EB41010F1AEE +:1079F0003046FDF7F4FD0C99081A3844A0F1200731 +:107A00000AE0E18A40F27122D4F80401514300EB0C +:107A10004100D4F81011471AD4F80821D4F8001105 +:107A2000D4F8100101FB020B607D40F2E24110FB33 +:107A300001FA94F855603046FDF7DDFD0146022E4F +:107A400008BF9B4807D0012E08BF9A4803D0042ED8 +:107A50000CBF99489948084400F2E1414FF47A700C +:107A6000B1FBF0F000EB4B0082443046FDF7B7FD70 +:107A7000504400F160018C484161012084F80C0100 +:107A8000D0E5628840F27123D4F814115A43C1EB57 +:107A9000420202FB00F70098D4F800C10BEB000291 +:107AA000D4F80801D4F81031121A0CFB0030521E21 +:107AB00002FB010B607D40F2E24110FB01FA94F8F9 +:107AC00055000646FDF797FD0146022E08BF78488F +:107AD00007D0012E08BF774803D0042E0CBF76488C +:107AE0007648084400F2E1414FF47A70B1FBF0F0BF +:107AF00000EB4B0082443046FDF771FD504400F12D +:107B00006001694841618DE5628840F27123D4F8D3 +:107B100014115A43C1EB420101FB00F794F86400D1 +:107B200024281CBF94F8650024280BD1B4F88E01DA +:107B3000A8EB000000B2002804DB94F891010028B3 +:107B400018BF0646039850B3BBF1000F27D10C981D +:107B5000002814BFBAF1000FFFDF94F85500FDF7BD +:107B60004AFD022E08BF524907D0012E08BF5149D5 +:107B700003D0042E0CBF50495049084400F2E141A3 +:107B80004FF47A70B1FBF0F03F1A94F85500FDF70E +:107B900026FD01460C98401A3844A0F120070098B1 +:107BA000D4F81411584400FB01FA3046FDF723FDC8 +:107BB0000146022E08BF3E4807D0012E08BF3D48AF +:107BC00003D0042E0CBF3C483C48084400F2E1417D +:107BD0004FF47A70B1FBF0F000EB4A0A3046FDF743 +:107BE000FEFC504400F160012F4841611AE5002875 +:107BF0007FF458AD94F80C0100283FF46CAD618817 +:107C000040F27122D4F814015143C0EB41012846DF +:107C100004F08DFD0004000C3FF45DAD1D990029BA +:107C200018BF0880012013B0BDE8F08F94F85C0104 +:107C3000FBF748FB94F85C012946FBF731FA002872 +:107C40001CBF89F0010084F82101002013B0BDE8B9 +:107C5000F08F2DE9F04F1A4C074683B02078894603 +:107C6000114E00254FF00208032804BF207BB842C4 +:107C70007ED1606830612078032818BFFFDF0327BA +:107C8000B9F1080F7FD2DFE809F0041D2828237E10 +:107C90007E796562FEF712FC002818BFFFDFB7701F +:107CA00003B0BDE8F08F0000D400002040420F0078 +:107CB00004360200A2240200D0FB0100C0D401005F +:107CC000500C0020FEF71CFF002818BFFFDFE7E77D +:107CD00003B0BDE8F04FFDF75CBA2775257494F842 +:107CE0002C00012658B14FF47A71A069FAF799FC7B +:107CF000A061002104F1100004F019FD1AE0012137 +:107D00006846FBF7BDFF9DF8000042F210710002CB +:107D1000B0FBF1F201FB1205FDF7F4FF0544294623 +:107D2000A069FAF77EFCA061294604F1100004F076 +:107D3000FEFC461C208C411C0A293CBF3044208498 +:107D4000606830B1208C401C0A2828BF84F8158058 +:107D500000D267753046FEF771F90028A0D0607A2E +:107D600000289DD1207B04F11001FBF799F901E077 +:107D70000BE008E0002808BFFFDF91E7207BFAF75F +:107D800028FF25708CE7FFDF8AE7202F28BFFFDF61 +:107D9000DFF804A407213AF81700F8F709FE0400F9 +:107DA00008BFFFDF202F28BFFFDFFB48218830F806 +:107DB0001700884218BFFFDF01273461B9F1080FAF +:107DC00080F05481DFE809F0049EA6A6A1F0F0EF50 +:107DD000C4F86051F580C4F8645194F8210138B9B1 +:107DE000FAF716FFD4F82C11FBF720FC00281BDC57 +:107DF000B4F81E11B4F85800814206D1B4F8D4107A +:107E0000081AA4F8D600204605E0081AA4F8D600FF +:107E1000B4F81E112046A4F85810D4F84811C4F83C +:107E20002C11C0F850111DE0B4F81C11B4F8580022 +:107E3000091AA4F8D610B4F81C112046A4F858105A +:107E4000D4F82C11C4F84811C4F85011D4F83411E6 +:107E5000C4F8E010D4F83811C4F85411B4F83C1147 +:107E6000A4F8581101F0ACFFFAF7ACFE94F855A055 +:107E700081465046FDF7BFFBBAF1020F08BFC74964 +:107E800009D0BAF1010F08BFC54904D0BAF1040FF7 +:107E90000CBFC449C44908444FF47A7100F2E14070 +:107EA000B0FBF1F1D4F8140140F271220144608872 +:107EB0005043C1EB4000A0F1300AB9F1B70F98BFB1 +:107EC0004FF0B7092146012004F082FC4844AAEB98 +:107ED0000000A0F21939A2462146012004F078FCE6 +:107EE000DAF824109C30814288BF0D1AC6F80C9035 +:107EF0004D4538BFA946C6F8089084F8207186F829 +:107F00000280CDE602F0A3F801E0FDF742F984F823 +:107F10002071C5E6FAF77CFED4F8502101461046E0 +:107F2000FBF784FB48B1628840F27123D4F8141146 +:107F30005A43C1EB4201B0FBF1F094F865100D29F2 +:107F40000FD0B4F85820B4F81E1113189942AEBFE0 +:107F5000481C401C1044A4F81E0194F8220178B972 +:107F600005E0B4F81E01401CA4F81E0108E0B4F8B6 +:107F70001E01B4F8D410884204BF401CA4F81E01AE +:107F8000B4F85A01DFF82492401CA4F85A01B4F85E +:107F90008000B4F87E10401AB4F85810401E08440F +:107FA0001FFA80FB24E053E060E000BF96F80080F9 +:107FB000B8F10C0F28BFFFDF39F8188094F86CA1D6 +:107FC000BAF10C0F28BFFFDF39F81A000023404434 +:107FD00081B202A8CDE90050B4F81E212046FFF777 +:107FE00095FA00283FF45CAE012818BFFFDF27D0C8 +:107FF000B4F81E01ABEB000000B20028D6DA08206E +:1080000084F8740084F87370204601F02AFB84F829 +:108010000C5194F85C514FF6FF77202D00D3FFDF11 +:108020005D4820F8157094F85C01FAF7D2FD202025 +:1080300084F85C01307903B0BDE8F04FF3F7A6BED9 +:10804000B4F81E01BDF808100844A4F81E01CFE7DB +:1080500094F80C01042818BFFFDF84F80C5194F841 +:108060005C514FF6FF77202DDAD3D8E7FFDF17E614 +:1080700010B54F4C207850B101206072FEF75EFDC4 +:108080002078032805D0207A002808BF10BD0C20D6 +:1080900010BD207BFBF716F9207BFBF760FB207BF4 +:1080A000FAF797FD002808BFFFDF0020207010BD01 +:1080B0002DE9F04F3E4F83B0387801244FF000088F +:1080C00040B17C720120FEF739FD3878032818BFD3 +:1080D000387A0DD0DFF8DC9089F803406946072034 +:1080E000F8F7EFFB002818BFFFDF4FF6FF7440E002 +:1080F000387BFBF7E7F8387BFBF731FB387BFAF787 +:1081000068FD002808BFFFDF87F80080E2E70298DB +:1081100000281CBF90F80C1100292AD00088A0422A +:108120001CBFDFF874A04FF0200B4AD00721F8F7EE +:108130003FFC040008BFFFDF94F85C01FBF70FFB76 +:1081400084F80C8194F85C514FF6FF76202D28BFFF +:10815000FFDF2AF8156094F85C01FAF73AFD84F81D +:108160005CB169460720F8F7ACFB002818BFFFDFB9 +:1081700022E06846F8F783FB0028C8D021E0029887 +:1081800000281CBF90F80C11002915D00088A0F51C +:108190007F41FF39CAD114E0840C0020043602006C +:1081A000A2240200D0FB0100C0D4010084480200D8 +:1081B000500C0020D40000206846F8F760FB00282F +:1081C000DDD089F8038087F82C8087F80B8003B016 +:1081D0000020BDE8F08F70B50446FD4890F800041B +:1081E000FC4D400995F800144909884218BFFFDF8B +:1081F00095F8140D4009F84991F80014490988428E +:1082000018BFFFDFF549002001220C7188700A7049 +:108210004870C870F2490870BDE8704048E7EF49FF +:10822000087070472DE9F843ED4C064688462078E3 +:1082300000285CD1EB48FAF772FC2073202856D056 +:10824000032766602770002565722572AEB1012193 +:1082500006F1FC00FBF73DFD0620F8F751FB8146D7 +:108260000720F8F74DFB96F8FC104844B1FBF0F2FC +:1082700000FB1210401C86F8FC00FAF7A3FCDA4958 +:10828000091838BF40F2F65000F23D1086B2FDF7F3 +:10829000F9FBE061FDF736FD4FF0010950B384F8BA +:1082A0000A9001216846FBF7EBFC9DF8000042F2C2 +:1082B00010710002B0FBF1F201FB12000644FAF764 +:1082C000A7FC3146FAF7ADF9A061277567752574EB +:1082D000207B04F11001FAF7E3FE002808BFFFDF5E +:1082E00025840020FEF72AFC0020BDE8F8830C203E +:1082F000BDE8F883FAF78CFC3146FAF792F9A061F1 +:10830000A57284F82C90A8F226502063DDE7B349CB +:1083100048707047B24810B5417A0124002918BF4F +:10832000002409D190F82C1031B1416A006B8142D0 +:1083300084BF0024FEF7FCFB204610BD70B5A74C9F +:108340000546E088401CE080D4E902016278D5F857 +:108350006061002A1CBF324604F019FAA060864210 +:1083600008D895F80C01012804D0E078002804BF53 +:10837000012070BD002070BD70B50C4640F2E24196 +:1083800000FB01F52046FDF736F9022C08BF97499E +:1083900007D0012C08BF964903D0042C0CBF954987 +:1083A000954908444FF47A7100F2E140B0FBF1F0D6 +:1083B00000F54D7085428CBF281A002070BD2DE954 +:1083C000F04F83B04FF00009044680F8209190F8F8 +:1083D000DE00002807BF94F80C01032803B0BDE8B5 +:1083E000F08FFAF715FCD4F8502101461046FBF740 +:1083F0001DF90028DCBF03B0BDE8F08F628840F2B1 +:108400007123D4F814115A43C1EB4201B0FBF1F0CF +:10841000411CB4F858000144A4F81C11B4F8D4105D +:10842000B4F81C21891A09B20029DCBF03B0BDE8E9 +:10843000F08F012184F82211B4F88010B4F87E2066 +:108440006E4F891A491E084485B2DFF890A10DF1DC +:10845000080B25E09AF800600C2E28BFFFDF37F8E4 +:10846000166094F86C81B8F10C0F28BFFFDF37F865 +:108470001800CDE9009B3044B4F81C2181B20123DF +:108480002046FFF743F8002804BF03B0BDE8F08F93 +:1084900001280FD0022812BFFFDF03B0BDE8F08F24 +:1084A000B4F81C01281A00B20028BCBF03B0BDE814 +:1084B000F08FCFE7B4F81C01BDF808100844A4F809 +:1084C0001C01EDE72DE9F0430422002583B00629C5 +:1084D0007DD2DFE801F0074B03191951044680F8FB +:1084E0000C2107E004463D48C178002918BF84F8F4 +:1084F0000C210CD0FAF798FAA4F85A51B4F85800A5 +:10850000A4F81E0184F8225103B0BDE8F083067878 +:108510000C2E28BFFFDF394F94F80C0137F8166096 +:108520004FF00109032807D00128E3D194F86C81AA +:10853000B8F10C0F0AD308E0C4F80851C4F8005190 +:1085400094F86C81B8F10C0F00D3FFDF37F81800F6 +:10855000CDE90095304481B2B4F8D4200023204600 +:10856000FEF7D4FF002818BFFFDFC3E7032180F820 +:108570000C1103B0BDE8F0830546876AB0F814011A +:10858000294686B2012004F023F9044695F85500E7 +:10859000FDF731F895F85510022908BF134907D0A7 +:1085A000012908BF124903D004290CBF11491249FF +:1085B00008444FF47A7100F2E140B0FBF1F06988B1 +:1085C00040F271225143C0EB4100801B18E02DE0C6 +:1085D00001E000E00BE000E019E000E0D400002042 +:1085E000500C0020537C01000AFAFFFF0436020001 +:1085F000A2240200D0FB0100C0D401008448020084 +:10860000A0F5597601F028FD002818BF1E3EA742AC +:1086100034BF20463846B04228BF344602D2A74273 +:1086200028BF3C466C6203B0BDE8F083FFDF03B0B7 +:10863000BDE8F083F8B5894C0246874F0025616894 +:10864000606A052A48D2DFE802F0032F34373E0083 +:10865000A07A002660B101216846FBF71BFB9DF85C +:10866000000042F210710002B0FBF1F201FB1206B1 +:10867000FDF748FB8119A069F9F7D3FFA0612574C4 +:1086800003206075607A38B9207B04F11001FAF795 +:1086900007FD002808BFFFDF2584FAF7C5F9387900 +:1086A000BDE8F840F3F772BBBDE8F840002100F0E8 +:1086B0006DB8C1F86001F8BDD1F86001BDE8F840BF +:1086C000012100F063B884F82C50FAF7ADF938793D +:1086D000BDE8F840F3F75ABBFFDFF8BD70B55E4C5C +:1086E000A178022906BFE188002970BD2569C5F877 +:1086F000640195F85500FCF772FFD5F86411081A6B +:10870000A1680144A160E1680844E06070BD70B5F3 +:108710000546514890F802C0BCF1020F06BF00693F +:1087200000F5B0744E4C002904BF256070BD4FF4B5 +:108730007A7601290DD002291CBFFFDF70BD1046DB +:10874000FCF768FF00F2E140B0FBF6F0281A206069 +:1087500070BD1846FCF76DFF00F2E140B0FBF6F08B +:10876000281A206070BD3D48007800281CBF0020FA +:10877000704710B50720F8F7B5F880F0010010BD7C +:1087800036480078002818BF012070472DE9F047CF +:10879000324C82B0002584F82C50D4F8188084F82C +:1087A0002810E572814625700127277229466068E6 +:1087B00003F030FB6168C1F85081267B81F85C6171 +:1087C000C1F86091C1F85481B1F80080202E28BF13 +:1087D000FFDF244820F81680646884F80C51DFF825 +:1087E0007880A4F8585198F800600C2E28BFFFDF5D +:1087F000DFF8749039F816A094F86C610C2E28BF3D +:10880000FFDF39F816000023504481B200951A4664 +:1088100020460195FEF77AFE002818BFFFDFC4F856 +:108820000851C4F8005184F80C71A4F81E51A4F842 +:108830001C5184F82251B4F85800401EA4F8580086 +:10884000A4F85A51FAF7F0F898F8040002B0BDE81D +:10885000F047F3F79BBA0000D4000020500C002032 +:10886000740C0020840C00208448020070B5FE4C7B +:1088700021690A88A1F8FC2181F8FA0191F85400D5 +:10888000012808BF012503D0022814BFFFDF0225FD +:10889000206980F8FE5190F85500012808BF012595 +:1088A00003D0022814BFFFDF02252069012180F8D0 +:1088B000FF5180F8F811002180F8A4112079BDE85B +:1088C0007040F3F763BA2DE9F04FE74C83B0A0791D +:1088D00010F0010F04BF03B0BDE8F08FA0690123C1 +:1088E0000521C578206990F86520583003F0B5FE61 +:1088F00068B1A81E0A2806D2DFE800F009090505BC +:10890000090905050909A07840F00800A070A078C1 +:1089100000281CBF03B0BDE8F08FA06920274FF0EE +:10892000020890F80390B9F1000F1CBFB9F1010FD4 +:10893000B9F1160F1ED1206990F8640003F076FE9D +:10894000C0B1216991F864001F2813D0202808D0F5 +:10895000B9F1160F0CBFA77084F8028003B0BDE810 +:10896000F08F262081F86400B9F1160F1CBF2A2071 +:10897000FFF77CFF47F6FE7A012600254FF0280B13 +:10898000B9F10C0F00F049810BDCB9F10C0F80F04C +:108990005884DFE809F068412BD9F6F6F5F4F3F6D0 +:1089A000AAD0B9F1150F00F0518211DCB9F1110F05 +:1089B00000F0BE83B9F1120F00F0C981B9F1130FB5 +:1089C00000F0B881B9F1140F00F0D58100F039BC86 +:1089D000B9F1160F00F06C82B9F1180F00F0CE82D9 +:1089E000B9F1FF0F00F0268400F02BBC20690123B1 +:1089F000194690F86720583003F02FFE002840F009 +:108A00002284A06904F018FB216981F87201072013 +:108A100081F8670000F017BC20690123002190F85D +:108A20006520583003F019FE002800F0BA83A069D1 +:108A300004F0FFFA2169A1F88E01B1F85820801ADC +:108A400000B28245A8BF0028DCBF81F874B081F86D +:108A5000736040F3F88301F5C871A06904F0E4FA8B +:108A60000B2021693DE020690123002190F8652059 +:108A7000583003F0F2FD002800F09383A06904F061 +:108A8000AFFA002800F0DD83A0692269B0F80D106C +:108A9000A2F88E11B2F85830C91A09B28A45A8BF97 +:108AA0000029DCBF82F874B082F8736040F3CB8396 +:108AB000017982F89011B0F80510A2F8921104F033 +:108AC00082FA2169A1F89401A06904F07FFA216972 +:108AD000A1F89601A06904F080FA2169A1F8980133 +:108AE0000D2081F8650000F0AEBB20690123002154 +:108AF00090F86520583003F0B0FD002820690BD0B5 +:108B0000A0F88A5090F88C10491C80F88C10102125 +:108B100080F8651000F097BB90F8652001230521CF +:108B2000583003F09AFD00281CBF0820A07040F0C8 +:108B30008A8300F036BB206990F86510112908BFC0 +:108B4000122140F09C82E3E720690123002190F884 +:108B50006520583003F081FDA0B9206990F86520A8 +:108B6000122A0FD001230521583003F076FD00288A +:108B700018BF082000F0158300F097B9B7E0F6E2BF +:108B800036E05EE3206990F88E1031B9A0F88A5083 +:108B900090F88C10491C80F88C1000F1E801A06955 +:108BA00004F063FA206900F1C001A06904F068FADA +:108BB000206990F8C001002818BFFFDF20690188F4 +:108BC000A0F8C21100F5E271A06904F03CFA206936 +:108BD00000F5E671A06904F03EFA206980F8C061F2 +:108BE000142180F865102079F3F7D0F800F02BBB42 +:108BF000206990F86510172940F0418290F88C1098 +:108C0000491E49B280F88C100029B8BFFFDF1B2035 +:108C1000216981F8650000F016BB206990F86610A4 +:108C200011F0020F09D090F8642001230821583078 +:108C300003F013FD002800F0B482206990F8900042 +:108C400010F0020F18D1A06904F02EFA216981F802 +:108C50009100A069B0F80520A1F89220B0F80700B3 +:108C6000A1F8940002E00000F000002091F89000CC +:108C700040F0020081F89000206990F8901011F007 +:108C8000010F05D0206990F8641006291CD114E06A +:108C900090F8660010F0020F18BFFFDF206990F80F +:108CA000661041F0020180F86610A0F88A5090F832 +:108CB0008C10491C80F88C10E4E780F8645080F830 +:108CC00088502079F3F762F8206990F88C11042914 +:108CD00040F0B98280F88C512079F3F757F8206979 +:108CE00090F86410002940F0AE8200F01EBA2069AE +:108CF00090F8660010F0010F77D16946A06904F082 +:108D0000DAF99DF8000000F02501206980F896103E +:108D10009DF8011001F0410180F89710A0F88A50E9 +:108D200090F88C10491C80F88C1090F8661041F077 +:108D300001011CE020690123092190F864205830CA +:108D400003F08BFC002840F0248200F02ABA20694E +:108D500090F8661011F0040F40F02382A0F88A50BA +:108D600090F88C2041F00401521C80F88C2080F88F +:108D7000661000F068BA206990F8660010F0300FB5 +:108D800033D1A06904F0B4F9002800F05A822769B1 +:108D9000A06904F0A9F938872769A06904F0A0F94F +:108DA00078872769A06904F0A1F9B8872769A069C5 +:108DB00004F098F9F887A07910F0020F03D06069E9 +:108DC000C078142812D0206990F864101C290DD0A6 +:108DD00090F84E1001290CD090F89B11002904BF87 +:108DE00090F89A1100290CD003E05BE0206980F82C +:108DF0004E60206990F8661041F0100180F866100E +:108E00001AE090F8661041F0200180F866100288A0 +:108E1000A0F8E021028FA0F8E221428FA0F8E4211F +:108E2000828F00F5D671A0F8E621C08F888781F87F +:108E300032602079F2F7AAFF2069A0F88A5090F8F2 +:108E40008C10491C80F88C1000F0FDB920690123BA +:108E50000A2190F86420583003F0FFFB10B3A0699A +:108E600004F046F9A8B12669A06904F03DF93087FD +:108E70002669A06904F034F970872669A06904F0B6 +:108E800035F9B0872669A06904F02CF9F08701F064 +:108E9000EDFA206980F8885080F8645001F0B6FA45 +:108EA00000F0D1B9A07840F00100A07000F0CBB97B +:108EB000206901230B2190F86520583003F0CDFB89 +:108EC00010B1A77000F0BFB920690123002190F80C +:108ED0006520583003F0C1FB002800F06281206952 +:108EE00090F864002428ECD0A06904F01CF9002854 +:108EF00000F0A781206990F8961041F0040180F8F5 +:108F00009610A1694A7902F0070280F85120097988 +:108F100001F0070180F8501090F8A531002B04BF34 +:108F200090F8A431002B1CD190F855C000F15403E7 +:108F30008C4502BF1978914280F87D6011D000F510 +:108F4000D67180F8F2610288A0F8F42190F85020E0 +:108F500080F8F62190F8510081F84B002079F2F763 +:108F600015FF2069212180F86510A0F88A5090F83B +:108F70008C10491C80F88C1000F065B9206990F8BD +:108F80006410202914BF0027012790F865102229BA +:108F900008BF00F1650804D0002F18BF00F1640875 +:108FA0006DD090F8961041F0040180F89610A069F9 +:108FB00004F0DBF8F0B3D4F81890484604F0C9F890 +:108FC0000090484604F0C9F8814603F03CFC0100DB +:108FD00018D0206990F854208A4213D090F8A43118 +:108FE00023B190F8A63113EA090F4BD0002F04BF2C +:108FF00090F8513013EA090F01D18A4242D890F813 +:10900000A401B8B1DDF80090484603F01CFC78B12B +:10901000216991F8552082420AD091F8A40120B12B +:1090200091F8A70110EA090F2CD091F8A40108B11A +:109030006A4600E026E0A169206903F013FCE8B36A +:10904000A06904F090F82169A1F88E01B1F85820C8 +:10905000801A00B28245A8BF0028DCBF81F874B036 +:1090600081F8736052DD9DF8000081F890019DF851 +:10907000010081F89101242088F8000046E084F87E +:109080000280E0E0206990F8A40100281CBF1E20A7 +:10909000FFF7ECFBB7B1A0692169C07881F8CA007D +:1090A00006FA00F010F0807F08BFFFDF0A21206978 +:1090B00080F8641090F88800002800E014E008BFF1 +:1090C000FFDF0DE088F80050216991F88C00401E08 +:1090D00040B281F88C000028B8BFFFDF01F07BF9B7 +:1090E000206980F87D50AEE0206990F8A40120B19D +:1090F0000020FFF7BBFB88F80050206900F16501F4 +:1091000080F87D50884508BF80F86550206900F1DF +:109110006501884509D190F88C10491E49B280F844 +:109120008C100029B8BFFFDF8DE080F888508AE0FE +:10913000206990F8961041F0040180F89610A0691B +:1091400004F02FF816287ED1206990F864002028BA +:1091500002D0262805D076E0A06904F026F8FFF7B3 +:1091600085FB206980F8645080F888506BE02069A6 +:1091700090F864200E2A03D1A1690979122902D03E +:109180001C2A1AD10FE001230921583003F065FA97 +:1091900038B1206980F87C5080F8885080F864509D +:1091A00051E0A6704FE0A1690979142904BF80F845 +:1091B000645080F888503FF471AE202A03D1A16931 +:1091C0000979162914D0262A03D1A169097916290B +:1091D0000ED0A1690979172904BF90F86520222AC9 +:1091E00013D0E2691AB1FF2908BF80F886612AE02E +:1091F00080F8645080F8885090F86500212818BFE6 +:109200001A2020D0FFF732FB1DE080F8655090F85F +:109210008C10491E49B280F88C100029B8BFFFDFBE +:10922000206980F87D5090F8A401002818BF002024 +:1092300009D0E7E7E06900281CBF206980F8866153 +:1092400001D101F0C8F82069D0E92A12491C42F185 +:109250000002C0E92A1203B0BDE8F08F70B5FB4EE2 +:1092600005460C46306990F8CB00FE2818BFFFDF9A +:1092700032690020002C82F8CB501CBFA2F88A0073 +:1092800070BDA2F88400012082F8880070BD30B55E +:1092900085B005466846FCF73EFA002808BFFFDFA8 +:1092A000222100980BF003F80321009803F040FE00 +:1092B0000098017821F010010170294603F066FE44 +:1092C000E24C0D2D04BF0621009830D00BDCA5F137 +:1092D00002000B2819D2DFE800F0201863191926C4 +:1092E000187018192C00152D7BD008DC112D2DD0ED +:1092F000122D18BF132D09D0142D30D005E0162DD6 +:1093000046D0172D6BD0FF2D6AD0FFDFFCF716FA81 +:10931000002808BFFFDF05B030BD2069009990F834 +:10932000CC000871F2E72169009891F8CC10017126 +:10933000ECE7E26800981178017191884171090A9F +:1093400081715188C171090A0172DFE70321009818 +:1093500003F025FF0621009803F025FFD6E72069DA +:10936000B0F84410009803F0ABFE2069B0F8461046 +:10937000009803F0A9FE2069B0F84010009803F0AF +:10938000A7FE2069B0F84210009803F0A5FEBDE7E3 +:109390002069009A90F8A611117190F8A7014BE08E +:1093A000206900F1F001009803F06EFE206900F1E1 +:1093B000C401009803F072FEA8E7A549D1E90001B5 +:1093C000CDE90201206902A990F8960000F025007D +:1093D0008DF80800009803F09CFE97E701E019E083 +:1093E0002CE02069B0F84010009803F071FE20696D +:1093F000B0F84210009803F06FFE2069B0F84410F6 +:10940000009803F05DFE2069B0F84610009803F064 +:109410005BFE7BE7206990F8A41139B1009990F8C0 +:10942000A6210A7190F8A70148716FE7009A90F899 +:109430005410117190F85500507167E7206990F849 +:109440008721D0F88811009803F0AEFD5EE770B573 +:109450000C4605464FF4007120460AF04AFF25806D +:1094600070BDF7F7AEBB2DE9F0410D460746072169 +:10947000F7F79EFA040008BFBDE8F08194F8AC014C +:109480000026B8B16E700920287094F8AC0178B14C +:10949000268484F8AC61D4F8AE016860D4F8B201D7 +:1094A000A860B4F8B601A88194F8AC010028EFD107 +:1094B0002E7144E094F8B801002837D094F8B80130 +:1094C0000D2818D00E2818BFFFDF38D12088F7F7F5 +:1094D000A1FB0746F7F74DF8A0B96E700E20287073 +:1094E00094F8BA0128712088E88084F8B861384679 +:1094F000F7F739F823E02088F7F78CFB0746F7F7F2 +:1095000038F810B10020BDE8F0816E700D20287091 +:1095100094F8BA0128712088E88094F8BE01287276 +:1095200084F8B8613846F7F71EF808E094F8F001BF +:1095300040B16E701020287084F8F061AF80012077 +:10954000BDE8F08194F8C00190B16E700A202870D7 +:109550002088A880D4F8C401D4F8C811C5F8060042 +:10956000C5F80A10B4F8CC01E88184F8C061E6E7D8 +:1095700094F8CE0140B16E701A202870B4F8D00172 +:10958000A88084F8CE61DAE794F8EA0180B16E70C1 +:109590001B20287094F8EA010028D0D084F8EA61F2 +:1095A000D4F8EC01686094F8EA010028F6D1C6E727 +:1095B00094F8D2012F1DA0B16E701520287094F878 +:1095C000D201002818BF04F5EA75B8D084F8D2613A +:1095D000294638460AF099FF94F8D2010028F5D1BF +:1095E000ADE794F8DE0150B16E701D20287084F84C +:1095F000DE6104F5F07138460AF087FF9FE794F8C2 +:10960000F20138B11E20287084F8F261D4F8F40118 +:10961000686094E794F8F801002808BFBDE8F0817D +:109620006E701620287094F8F801002887D000BFCB +:1096300084F8F861D4F8FA016860B4F8FE01288172 +:1096400094F8F8010028F3D179E70000F000002039 +:109650009C480200FE4AD0600020D0611062117167 +:109660007047002180F8641080F8651080F8681059 +:1096700090F8DE1011B10221FEF724BF0321FEF79E +:1096800021BF2DE9F047F24C814686B020690D4696 +:109690000088F7F7D1FA070008BFFFDFA07828435A +:1096A000A070A0794FF0000510F0200F20691CBFBA +:1096B000A0F87E5080F8E45004D1B0F87E10491C28 +:1096C000A0F87E102069012690F86A1039B990F848 +:1096D000652001230621583002F0BFFF48B3E0881F +:1096E00010F4006F07D0206990F86A10002918BFA5 +:1096F000A0F876501DD12069B0F87610491C89B2C7 +:10970000A0F87610B0F878208A422CBF531A0023B4 +:10971000B4F808C00CF1050C634598BF80F87C6074 +:10972000914206D3A0F8765080F8F0612079F2F7E4 +:109730002DFBA0794FF0020A10F0600F11D02069C4 +:1097400090F8681011B1032906D00AE080F868602B +:109750000121FEF7B7FE04E080F868A00121FEF7C2 +:10976000B1FE206990F86810012905D1E18811F453 +:10977000807F18BF80F868A04FF00808B9F1000F8B +:1097800040F09981E28812F4007F18BFA0F8F850E9 +:1097900004D1B0F8F810491CA0F8F81012F0080F26 +:1097A00050D0A17800294DD190F8CB00FE2808BFF9 +:1097B000FFDFFE21206980F8CB1090F86510192991 +:1097C00007D0206990F864101F2911D027292AD0CA +:1097D0002FE080F88D5090F88C10491E49B280F827 +:1097E0008C100029B8BFFFDF206980F86550E8E7DA +:1097F00090F8650002F01AFF80B12069262101234C +:1098000080F8641090F865200B21583002F025FF95 +:10981000002804BF2A20FFF729F80AE02169202048 +:1098200081F8640005E080F8856180F8645080F874 +:109830008850206990F86710082904BF84F800A0B8 +:1098400080F8CBA0FFF73FF8A07910F0040F07D005 +:10985000A07828B9206990F86700072808BF26700B +:1098600000F038FCA07910F0100F09D0A07838B9BA +:10987000206990F865100B2904BF0C2180F8651051 +:10988000E07810F0080F11D020690123052190F82D +:109890006520583002F0E1FE28B184F8028020698A +:1098A00080F8B85102E0002001F0F2FAE0690028E7 +:1098B0005BD000950195029503950495206990F879 +:1098C0005500FBF798FE4FF47A7100F5FA70B0FB83 +:1098D000F1FA206990F85500FBF781FE5044ADF88D +:1098E000060020690188ADF80010B0F85810ADF8F6 +:1098F00004104188ADF8021090F8860130B1A069DB +:10990000C11C039103F0FEFA8DF81000206990F855 +:1099100085018DF80800E16968468847206980F86C +:10992000865180F885510399F9B190F88411E1B915 +:1099300090F86410272918D09DF81010039AA1B14F +:109940001378FF2B06D0072B02BF02295178FF297D +:1099500002D00AE01B2908D880F884610399C0F876 +:1099600088119DF8101080F8871100F0CCFD01F0EF +:1099700085FA0028206918BFA0F8D85004D1B0F8A3 +:10998000D810491CA0F8D81001F07BFA40B1216929 +:1099900091F8E40002289CBF401C81F8E40004D840 +:1099A000206990F8E400022806D92069A0F8D85070 +:1099B000A0F8DA5080F8E45020690123002190F8E3 +:1099C0006520583002F049FE20B9206990F8650002 +:1099D0000C285AD120690123002190F864205830C6 +:1099E00002F03BFEB0B320690123002190F867200C +:1099F000583002F032FE68B3206990F868100229EE +:109A000004BF90F8E40000283FD13846F6F781FB08 +:109A100000B3206990F8CB10FE2936D1B0F8D210EF +:109A2000012932D980F8DD60B0F88010B0F87E20CE +:109A30008B1E9A42AFBF0121891A491E89B2B0F824 +:109A4000D82023899A422EBF01229A1A521C02E082 +:109A5000F000002019E038BF92B2914288BF114651 +:109A6000012908BF80F8DD5090F869218AB1B0F86B +:109A7000DA20B0F86A0182422FBF0120801A401C10 +:109A800080B2814288BF014603E02069012180F84D +:109A9000DD502069B0F85820114489B2A0F8D410E4 +:109AA00090F86830002B18BF012B5DD0022B1CBF33 +:109AB000032BFFDF09D0E088C0F340200028206995 +:109AC00018BFA0F8E65059D151E090F86730082B44 +:109AD00021D0B0F87E10B0F8802000278B1C9A426D +:109AE00006D3511A891E0F043F0C1CBF791E8FB27A +:109AF00090F87C1051B190F864200123092158306E +:109B000002F0ABFD002808BF002729D0206990F89B +:109B10006A1089B908E0B0F87E30032B24D3B0F87E +:109B200080101144491C1FE090F865200123062194 +:109B3000583002F092FD78B121690020B1F8782008 +:109B4000B1F876108B1C9A4203D3501A801E18BFAE +:109B5000401EB84238BF87B2002F1CBF781E87B2A4 +:109B60002069B0F8D4103944A0F8D010A3E7B0F8B9 +:109B7000E610B0F8D6201144A0F8E610206990F85D +:109B8000701139B990F8672001231946583002F056 +:109B900064FD38B12069B0F88210B0F8D6201144C5 +:109BA000A0F88210206990F8883033B1B0F88410A2 +:109BB000B0F8D6201144A0F8841090F98C20002A27 +:109BC00006DDB0F88A10B0F8D6C06144A0F88A105B +:109BD0004FF03D0CB9F1000F18BF80F874C049D1A7 +:109BE0002178022911D0012908BF90F872113FD0C5 +:109BF000A17821B380F8736011F0140F18BF1E21F3 +:109C000009D000BF80F8741050E090F8CC100629FD +:109C100018BF16212CE011F0080F18BF80F874C08F +:109C200044D111F0200F18BF2321EBD111F0030F05 +:109C300008BFFFDF2A20216981F8740032E02BB1D0 +:109C4000B0F88410B0F88630994210D2002A05DDB1 +:109C5000B0F88A10B0F88620914208D2B0F882207D +:109C6000B0F880108A4208D390F870212AB12221DE +:109C700080F8741080F8736018E090F868203AB1AA +:109C8000B0F87E208A4228BF80F87480F2D209E0C2 +:109C9000B0F87E10062905D33E2180F8741080F8B4 +:109CA000736003E0206990F8731079B1206980F83F +:109CB000645080F8655080F8685090F8DE100029F4 +:109CC00014BF02210321FEF7FDFB02E00021FEF795 +:109CD000F9FB206980F8DE5006B0BDE8F047FBF7DD +:109CE0004FBDF84902468878CB78184313D108460F +:109CF00000694AB1897911F0080F03D090F8670024 +:109D0000082808D001207047B0F84810028E914210 +:109D100001D8FEF713BB0020704770B5E94C05462B +:109D20000E46E0882843E08015F0020F04D015F0BD +:109D3000010F18BFFFDF666115F0010F4FF0000241 +:109D40004FF001001AD0A661F178062902D00B2944 +:109D50000BD013E0216991F86530172B0ED1002349 +:109D6000C1E9283381F8690008E0216991F865307C +:109D7000112B04BF81F8692081F88E0015F0020FC5 +:109D800018D06169C978052902D00B290BD011E0E0 +:109D9000216991F86520152A0CD10022C1E92A22F7 +:109DA00081F86A0006E0206990F86510102908BF64 +:109DB00080F86A2015F0800F1CBF0820E07070BD8D +:109DC0002DE9F84FBF4C00254FF00108E580A57044 +:109DD000E5702570206168F30709074680F8DE808A +:109DE0000088F6F729FF5FEA000A08BFFFDF206955 +:109DF0000088FBF78DFC20690088FBF7AFFC206929 +:109E0000B0F8D21071B190F8CB10FE290FD190F8B4 +:109E1000701189B190F8672001231946583002F07B +:109E20001CFC88B1206990F8CB00FE2804D0206982 +:109E300090F8CB00FFF72BFA206990F8DF1000298B +:109E400018BF25811BD10FE02069A0F8825090F83F +:109E5000711180F8CC1000210220FFF7FFF9206972 +:109E600080F8DD500220E5E790F8AC1129B9018CAB +:109E70008288914288BF218101D881882181B0F8F0 +:109E8000D610491E8EB2B0F8D8103144A0F8D810C0 +:109E900090F8DC1000291CBFA0F8DA5080F8DC50E4 +:109EA00004D1B0F8DA103144A0F8DA10B0F87E101E +:109EB0003144A0F87E1090F86A1039B990F8652006 +:109EC00001230621583002F0C8FB28B12069B0F800 +:109ED00076103144A0F876102069B0F8D21001292C +:109EE0009CBF491CA0F8D210002E18BF80F8E45087 +:109EF00090F8DD10A1B1B0F8D800218988420FD2C6 +:109F00005046F6F706F958B1206990F8691139B151 +:109F1000B0F8DA10B0F86A01814228BF00F0B4FF4F +:109F2000206980F8DD5090F865100B2918BF0C29C6 +:109F300016D1B0F85820B0F88E31D21A12B2002AD9 +:109F40000EDBD0F89011816090F89411017302211A +:109F500001F060FF206980F8655080F898804AE041 +:109F6000242924D1B0F85810B0F88E21891A09B2EA +:109F700000291CDB90F8A42190F89011002908BF5B +:109F800090F8541080F8541090F89111002908BFEF +:109F900090F8551080F85510002A1CBF0020FEF7DD +:109FA00065FC206980F8655080F87D5023E090F8CA +:109FB0006410242918BF25291DD1B0F85810B0F815 +:109FC0008E21891A09B2002915DB90F89011002919 +:109FD00008BF90F8541080F8541090F8911100299F +:109FE00008BF90F8551080F855100020FEF73EFC91 +:109FF000206980F86450216901F15800B1F8D62039 +:10A0000002F02CF9206990F86911002918BFA0F816 +:10A01000DA502D4800902D4B2D4A3946484600F025 +:10A0200073FE216A00291CBF6078FBF720F82069C5 +:10A030000123052190F86520583002F00EFB00281E +:10A0400008BFBDE8F88FBDE8F84F00F066BC00F02F +:10A05000FBBE1C49C86170471A48C069002818BF78 +:10A0600001207047174A50701162704710B50446BE +:10A07000B0F894214388B0F89611B0F898019A424C +:10A0800001BFA3889942E38898420FD02388A4F89F +:10A09000B031A4F8B221A4F8B411A4F8B60101209B +:10A0A00084F8AC0107480079F1F770FE01212046E1 +:10A0B00001F0B0FE002084F86500032084F86800F9 +:10A0C00010BD0000F000002083960100E39C010019 +:10A0D0001B9D010070B5FE4CA07910F0020F08BF67 +:10A0E00070BDA078002818BF70BD6169F8482722AC +:10A0F000CB780E26002500690D2B78D00BDCA3F160 +:10A1000002030B2B1FD2DFE803F0201E808B9F2F52 +:10A110001E591E73D100152B00F02A810BDC112B68 +:10A1200065D0122B00F0F480132B00F0FF80142B6D +:10A1300000F00E8107E0162B00F03281172B00F0A3 +:10A140003F81FF2B35D0FFDF70BD90F867200123E2 +:10A150001946583002F081FA002818BF70BD082057 +:10A16000216981F8670070BD90F8643009790A2B85 +:10A1700001BF90F8CA308B4280F8645080F8885054 +:10A1800008BF70BD90F8663013F0080F0DD023F0B3 +:10A19000080180F8661090F88C10491E49B280F8CA +:10A1A0008C100029A8BF70BDCFE0FF291CBFFFDFC6 +:10A1B00070BD80F8642080F8845170BD90F866000E +:10A1C00010F0010F08BFFFDF216991F88C00401EDD +:10A1D00040B281F88C000028B8BFFFDF206990F8FA +:10A1E000661021F0010100BF80F8661070BD21E00B +:10A1F00090F86500102818BFFFDF0121206980F862 +:10A200008D10112180F8651070BD90F8650014283C +:10A2100018BFFFDF0121206980F88D101521F1E7BB +:10A2200090F86500152818BFFFDF1720216981F815 +:10A23000650070BD90F86500152818BFFFDF192074 +:10A24000216981F8650070BD90F865001B2818BF72 +:10A25000FFDF206980F88D5090F8B801002818BF02 +:10A26000FFDF206990F88E1049B180F88E50018888 +:10A27000A0F8BC1180F8BA5180F8B8610AE00188F2 +:10A28000A0F8BC1180F8BA51012180F8BE110D214F +:10A2900080F8B8110088F6F7BDFCF6F755F920797B +:10A2A000F1F774FD206980F8655070BD90F88C114D +:10A2B000042915D0206990F8661011F0020F08BF2C +:10A2C00070BD90F88C10491E49B280F88C1000299E +:10A2D000B8BFFFDF206990F8661021F0020183E724 +:10A2E00090F8642001230021583002F0B6F90028CC +:10A2F00008BFFFDF206990F8901011F0020F07BF30 +:10A30000062180F8641080F8885080F88C51D1E7DD +:10A3100090F8642001230021583002F09EF90028B3 +:10A3200008BFFFDF206980F8646070BD90F8661098 +:10A3300021F0040180F8661090F88C10491E49B293 +:10A3400080F88C100029A8BF70BDFFDF70BD00BF72 +:10A3500090F8642001230021583002F07EF9002893 +:10A3600008BFFFDF1C20216981F8640070BD00BFB9 +:10A3700090F8660000F03000102818BFFFDF206959 +:10A3800090F8661021F0100180F8661090F88C109B +:10A39000491E49B280F88C100029A8BF70BDD4E7CF +:10A3A00090F8642001230021583002F056F900286B +:10A3B00008BFFFDF1F20216981F8640070BD00BF66 +:10A3C00090F8650021281CBF0028FFDF22202169AA +:10A3D00081F8650070BD3E49086990F8662012F06A +:10A3E000080F1EBF01208870704742F0080280F8F5 +:10A3F00066208969C97880F8C9100021A0F88A1000 +:10A4000090F88C10491C80F88C10704710B5304CB7 +:10A4100005212069FEF756F8206990F84E100129B1 +:10A4200002BF022180F84E1010BD00F5D6710288DF +:10A43000A0F8D421028EA0F8D621828EA0F8D821CF +:10A44000028FB0F844309A4228BF1A46CA85828FDC +:10A45000B0F84600824238BF10460886012081F8D5 +:10A4600026002079BDE81040F1F790BC184830B4C0 +:10A47000006990F84E30B0F832C0C48EB0F8401089 +:10A48000428F022B28D08A4238BF11460186C28FE4 +:10A49000B0F842108A4238BF11468186028FB0F868 +:10A4A00044108A4238BF11464186828FB0F8461068 +:10A4B0008A4238BF1146C186418E614588BF8C46AD +:10A4C000A0F832C0C18EA14288BF0C46C48601E00C +:10A4D000F000002030BC7047038E9A4228BF1A4615 +:10A4E000C58F838E9D4238BF2B468A4238BF1146A6 +:10A4F0000186B0F842108B4228BF0B4683860021AC +:10A5000080F84E10CAE770B5FE4C206990F8CB1069 +:10A51000FE2906BFA178002970BD90F867200123AD +:10A520001946583002F099F8002818BF70BD20690C +:10A53000002590F8701159B1A0F8825090F871116F +:10A5400080F8CC10BDE8704000210220FEF786BEE6 +:10A5500090F8652001230421583002F07EF80600AF +:10A560000CD0D4F810C09CF86500102861D01428D5 +:10A5700065D015287BD01B287ED0BEE0216991F8DC +:10A58000660010F0010F05D0BDE8704001210920E0 +:10A59000FEF764BE10F0020F0BD001210C20FEF775 +:10A5A0005DFE206990F8901041F0010180F8901054 +:10A5B00070BD10F0040F05D0BDE8704001211320DC +:10A5C000FEF74CBE10F0080F09D091F8C90081F8D1 +:10A5D000CC00BDE8704001210720FEF73FBE10F01F +:10A5E000100F02D091F89B0120B191F8650021284D +:10A5F00073D179E091F89A0188B1B1F89C01A1F882 +:10A600004000B1F89E01A1F84200B1F8A001A1F804 +:10A610004400B1F8A201A1F8460081F89A51FFF771 +:10A6200025FFFFF7F3FEBDE8704001211520FEF77E +:10A6300015BEBDE8704001210B20FEF70FBEF9F7F3 +:10A6400025FB0C2838BF70BD08212069F030F9F7D0 +:10A6500021FB28B120690421C430F9F71BFB00B9A4 +:10A66000FFDFBDE8704001210420FEF7F7BD9CF834 +:10A67000730101280DD000E030E0022818BF70BD42 +:10A680009CF88E00D8B106208CF8CC000121022065 +:10A690001DE09CF8B801002818BF70BD0CF1B00394 +:10A6A00000220CF1E8010CF5BA7001F052FF012113 +:10A6B0000520FEF7D3FD206980F8735170BD9CF82A +:10A6C000960010F0040F14BF11200D200121FEF799 +:10A6D000C5FD206980F8735170BD0EE0BDE8704083 +:10A6E00001210620FEF7BABD91F87D00C0B991F8AE +:10A6F000A40110B191F8A50190B1206901230021B6 +:10A7000090F86420583001F0A8FFC8B120690123F7 +:10A71000042190F86520583001F09FFF30B10FE020 +:10A72000BDE8704001211720FEF798BD206990F820 +:10A730007C0028B1BDE8704000211220FEF78EBDDC +:10A74000206990F864200A2A2BD0002E18BF70BD13 +:10A7500001230021583001F080FF48B1206990F8B2 +:10A760008C11042904BF90F8900010F0030F22D040 +:10A7700020690123002190F86420583001F06DFF1A +:10A7800000287DD0206990F89A1111B190F89B11A2 +:10A79000E9B190F8A411002972D090F8A511E9B39D +:10A7A00092E090F8CA1080F8CC10BDE8704000210B +:10A7B0000720FEF753BD00210C20FEF74FFD206956 +:10A7C00090F8901041F0010180F8901070BDB0F841 +:10A7D0009C11A0F84010B0F89E11A0F84210B0F8FB +:10A7E000A011A0F84410B0F8A211A0F8461080F80B +:10A7F0009A5190F8660010F0200F13D0FFF736FE44 +:10A80000FFF704FE01211520FEF728FD206990F8CE +:10A81000661021F0200141F0100100E008E080F80E +:10A82000661070BDBDE8704000211420FEF716BD13 +:10A8300090F8652001230B21583001F00EFFF8B984 +:10A84000206990F85400012808BF012503D0022890 +:10A8500014BFFFDF0225206990F85500012808BFCA +:10A86000012603D0022814BFFFDF02262069012D34 +:10A8700090F8A61105D0022D08BF022903D00DE0E3 +:10A8800022E001290AD190F8A711012E04D0022E4E +:10A8900008BF02290BD001E0012908D090F86520FB +:10A8A00001230321583001F0D8FE68B903E00020ED +:10A8B000FDF7DCFF08E020690123022190F8652004 +:10A8C000583001F0CAFEB0B120690123002190F890 +:10A8D0006420583001F0C1FE002808BF70BD206917 +:10A8E00090F88401002808BF70BD0021BDE87040C9 +:10A8F000FF20FEF7B3BCBDE8704000211620FEF734 +:10A90000ADBC0000F000002030B5FB4C05462078BF +:10A91000002818BFFFDF657230BDF74901200872BB +:10A9200070472DE9F14FF54F39464E68304696F89D +:10A93000551001F042FF96F8551080B211F00C0F3F +:10A940006FF00D047FD0B0F5747F38BF002506D3BB +:10A950005038C11700EB916004EBA01085B2708EE7 +:10A96000A84238BF0546E648DFF88C93C9F82400B2 +:10A97000786800F15808834609F13400BBF832705A +:10A9800040689BF8551090F86AA0584601F015FFF2 +:10A990009BF8551080B211F00C0F5FD0B0F5747FAA +:10A9A00038BF002406D35038C21700EB926004EB86 +:10A9B000A01084B2A74238BF3C46BAF1000F1CBFBA +:10A9C000201D84B2E0B2F9F709FF98F812000028C0 +:10A9D0004FD008F15801CA4891E80E1000F50274F2 +:10A9E00084E80E10D8F86810C0F82112D8F86C105E +:10A9F000C0F8251200F58170FAF7A6FABF48007872 +:10AA000000280CBF0120002080F00101BD48017624 +:10AA1000D8E91412C0E90412A0F58372D9F8241001 +:10AA2000F9F7B5FD96F85500012808BF002204D0BB +:10AA300002281ABFFFDF00220122E9B20120F9F744 +:10AA4000B4FD1CE0FFE7022919BF04EBD00085B27A +:10AA50006FF00E0101EB900081D17FE7022919BF51 +:10AA600004EBD00084B26FF00E0202EB9000A1D193 +:10AA70009FE7D9F82400FAF767FAF9F7B9FD0098CB +:10AA800050B9012296F8553096211046FAF712F97E +:10AA900000219620FAF7A4FA96F82C00012808BFA6 +:10AAA000FAF730FB022089F80000BDE8F88F2DE9A5 +:10AAB000F04FDFF8488283B0414681464D68A1F1EE +:10AAC0001400009095F85D0005F158060127A1F1EA +:10AAD000340470B3012879D0022878D0032818BF35 +:10AAE000FFDF75D0206A0823017821F0080101708A +:10AAF000B27903EAC202114321F004010170F27934 +:10AB0000042303EA8202114321F01001017096F838 +:10AB100005B0E06AF5F70DFB8246FAF743FEBBF19C +:10AB2000020F7AD0BBF1010F78D0BBF1030F76D0C2 +:10AB30008AE0FFE700F0CAFB0146284601F03BFE31 +:10AB40001FFA80FB00F0C2FB10F00C0F6FF00D013C +:10AB50004FF0000A20D0BBF5747F38BF504607D3B2 +:10AB6000ABF15000C21700EB926001EBA01080B275 +:10AB7000298E814238BF0846ADF80800A5F8480084 +:10AB80000098FAF7EEFD90B1216AA77062694FF460 +:10AB90008060904703202CE0022819BF01EBDB0006 +:10ABA00080B26FF00E0000EB9B00E1D1DFE701AA5D +:10ABB00002A9E06AF5F7F8F9206210B196F83510AD +:10ABC00039B10098FAF7A1FD77718BE713E016E031 +:10ABD00026E09DF8041031B9A0F800A080F802A08A +:10ABE000012102F0A5F9BDF80810206A02F0DFFA91 +:10ABF0000220707176E70098FAF787FD72E7B5F8E2 +:10AC00004800ADF8000001AA6946E06AF5F7CCF902 +:10AC10002062002808BFFFDF64E708E00BE00EE0D9 +:10AC20000098FAF79EFD002808BFFFDF5AE730EAD8 +:10AC30000A0009D106E030EA0A0005D102E0BAF1C3 +:10AC4000000F01D0012100E00021206A027842EAD1 +:10AC500001110170717C00291CBF7179012933D069 +:10AC600006F15801264891E80E1000F5027A8AE8AC +:10AC70000E10B16EC0F82112F16EC0F8251200F569 +:10AC80008170FAF761F998F8000000280CBF0121E3 +:10AC900000211C480176D6E91212C0E90412A0F581 +:10ACA0008371226AF9F773FC95F85400012808BFF4 +:10ACB000002204D002281ABFFFDF00220122FB215C +:10ACC0000020F9F772FC03E0FAF73EF9F9F790FC7F +:10ACD000B9F1000F06D195F85430012296210020D9 +:10ACE000F9F7E8FF6771206A0188E18180782074B4 +:10ACF000277003B0BDE8F08F140100204801002048 +:10AD0000C80C0020D00E00202DE9F0471E46174643 +:10AD100081460C46FE4DDDF82080287828B9002FAA +:10AD20001CBF002EB8F1000F00D1FFDFC5F81C805A +:10AD3000C5E90576C5E90D9400272F72EF712F71D3 +:10AD4000EF706F71AF71AF70AF81F24E04F15808C0 +:10AD50002088F5F771FFE8622088F5F75BFF28632C +:10AD6000F9F759FD94F95700F9F702FE04F11200C2 +:10AD7000FAF7D3F804F10E00F9F704FE3078002852 +:10AD80000CBF03200120FAF7DCF898F81A00F9F755 +:10AD900001FEFAF7D0F83078002804BFFF2094F8BD +:10ADA000544023D098F81250B4F8328094F85510DB +:10ADB000204601F002FD94F8554080B214F00C0FCB +:10ADC0006FF00D012CD0B0F5747F06D35038C21748 +:10ADD00000EB926001EBA01087B24046B84528BF57 +:10ADE0003846002D1CBF001D80B2C0B22146F9F7C5 +:10ADF000F5FC3078F8B1706890F86801002818BF49 +:10AE0000F9F766FD224600210120F9F70CFF706872 +:10AE1000D0F8E000FAF79BF8BDE8F047012080E5A4 +:10AE2000022C19BF01EBD00087B26FF00E0101EBCD +:10AE30009000D2D1D0E7002122460846F9F7F3FE70 +:10AE4000BDE8F047012032E6B24800B50178343859 +:10AE5000007819B1022818BFFFDF00BD012818BF14 +:10AE6000FFDF00BDAA4810B50078022818BFFFDF39 +:10AE7000BDE8104000F080BA00F07EBAA4484079E6 +:10AE80007047A34800797047A14901208871704735 +:10AE90002DE9F04706009F489D4D406800F1580499 +:10AEA000686A90F8019018BF012E03D1296B08F051 +:10AEB00093FE6870687800274FF00108A0B1012860 +:10AEC0003CD0022860D003281CBFFFDFBDE8F0871C +:10AED000012E08BFBDE8F087286BF5F71FFB687AE5 +:10AEE000BDE8F047F0F752BF012E14D0A86A002841 +:10AEF00008BFFFDF6889C21CD5E9091009F058F9BD +:10AF0000A86A686201224946286BF5F783F9022E88 +:10AF100008BFBDE8F087D4E91401401C41F10001ED +:10AF2000C4E91401E079012801D1E77101E084F856 +:10AF30000780687ABDE8F047F0F728BF012E14D0EB +:10AF4000A86A002808BFFFDF6889C21CD5E909107C +:10AF500009F02EF9A86A686200224946286BF5F7C5 +:10AF600059F9022E08BFBDE8F087D4E91410491C36 +:10AF700040F10000C4E91410E07901280CBFE7712A +:10AF800084F80780BDE8F087012E06D0286BF5F71E +:10AF9000C5FA022E08BFBDE8F087D4E91410491C99 +:10AFA00040F10000C4E91410E0790128BFD1BCE7EA +:10AFB0002DE9F041574F3846A7F13404406800F1BD +:10AFC00058052078012818BFFFDFA878012648B16E +:10AFD0000021A970A6706269042090473878002883 +:10AFE00018BF2E71206A0321007831EA000004BFE7 +:10AFF000E878002805D1EE70216AA6706269022007 +:10B0000090470121002000F0D6F918B1BDE8F041C9 +:10B0100000F0B2B9BDE8F041002082E42DE9F14F23 +:10B020003C4E4FF000083046A6F1340540683178B8 +:10B0300000F1580A2878C146022818BFFFDFA88906 +:10B0400040F40070A88171683078FF2091F85410A6 +:10B05000F9F7C4FB009800289AF8120000F0FD8070 +:10B06000F9F7ECFAF9F7DAFA012788B99AF8120039 +:10B0700070B1686A417859B100789AF80710C0F346 +:10B08000C000884204D1EF70BDE8F84F00F074B9F9 +:10B09000686A41786981002908BFC5F8288003D013 +:10B0A000286BF5F771F8A862A88940F02000A88104 +:10B0B00085F804803078706800F1580B044690F8E9 +:10B0C0002C0001281AD1FAF713F85946204601F04E +:10B0D00080FA98B13078002870680CBF00F58A704B +:10B0E00000F5F570218841809BF8081001719BF8EC +:10B0F000091041710770687AF0F748FE686A9AF89B +:10B1000006100078C0F3800088423BD0307803E01E +:10B110001401002048010020706800F1580490F8E4 +:10B120005D0058B3022847D084F8058030780028A5 +:10B130001CBF2079002806D084F80480AF706A69AB +:10B14000414610209047E07890B184F80380FAF7E8 +:10B1500017FB002808BFFFDF0820AF706A690021D5 +:10B160009047D4E91202411C42F10000C4E91210D8 +:10B17000A07901280CBF84F80680A771A88940F443 +:10B180008070A881686A9AF807300178C1F3C0021C +:10B190009A424FD13278726801F0030102F15804EB +:10B1A000012918BF022932D003291CBFE87940F0D9 +:10B1B000040012D0E8713DE0E86AF4F721FF0028AE +:10B1C00008BFFFDFD4E91210491C40F10000C4E9B8 +:10B1D0001210687AF0F7DAFDA6E701F0C1FE90B12F +:10B1E000A770A989384641F40061A981696AAF70E6 +:10B1F0006A699047E079012803D100BF84F807808D +:10B2000018E0E77116E0E87940F01000D2E74078E6 +:10B21000F8B1A98941F40061A981A96A51B1FB285B +:10B22000F1D8287A002808BFB94603D080206A697F +:10B23000002190470120009900F0BDF8B0B1B9F1AC +:10B24000000F1CBF0020FFF723FEBDE8F84F00F001 +:10B2500093B8E0790128D4D1D0E7002818BFF9F7D6 +:10B2600026FAA88940F04000A881E3E7B9F1000F71 +:10B270001CBF0120FFF70CFE0020FFF718FCB9F1FE +:10B28000000F08BFBDE8F88F0220BDE8F84FFFE5CA +:10B2900070B50D4606466848674900784C6850B15D +:10B2A000F9F748FA034694F8542029463046BDE899 +:10B2B0007040FDF72CBAF9F73DFA034694F8542094 +:10B2C00029463046BDE8704005F00ABD5A4802786C +:10B2D0004168406801F1580C91F8643090F85400CE +:10B2E000242B1CBF9CF80DC0BCF1240F13D01F2BC6 +:10B2F00018BF202B24D0BCF1220F18BF7047002AA2 +:10B3000008BF704791F8A62191F85110114011F033 +:10B31000010F27D02EE04AB191F89011002908BF03 +:10B320007047012818BF012924D021E091F8F210BC +:10B33000002908BF7047012818BF01291AD017E05B +:10B34000BCF1220FDBD0002A08BF704791F8A6118C +:10B3500011F0010F0ED111F0020F08BF7047012844 +:10B3600008D005E011F0020F08BF7047012801D096 +:10B3700002207047012070472F4910B54C68F9F73B +:10B3800089FEF9F768FEF9F763FDF9F7CCFDF9F7E7 +:10B390002FF994F82C00012808BFF9F7A9FE274CD3 +:10B3A00000216269A0899047E269E179E0789047DD +:10B3B0000020207010BD70B5204C0546002908BF44 +:10B3C000012D05D12079401CC0B22071012831D84F +:10B3D000A1692846884700282CD0A179184839B19E +:10B3E000012D01BF41780029017811F0100F21D003 +:10B3F000E179F9B910490978002908BF012D05D074 +:10B4000000290CBF01210021294311D10D490978E0 +:10B4100011F0100F04BF007810F0100F0AD0A078C0 +:10B4200040B9A06A20B9608910B111F0100F01D0A5 +:10B43000002070BD012070BD4801002014010020D3 +:10B44000C80C00202201002010B540F2C311F748BB +:10B4500008F02DFFFF220821F54808F020FFF548ED +:10B46000002141704FF46171418010BD2DE9F04120 +:10B470000E46054600F046FBEC4C102816D004EBB7 +:10B48000C00191F84A0110F0010F1CBF0120BDE876 +:10B49000F081607808283CBF012081F84A011CD265 +:10B4A0006078401C60700120BDE8F0816078082859 +:10B4B00013D222780127501C207004EBC208306898 +:10B4C000C8F84401B088A8F84801102A28BFFFDF57 +:10B4D00088F8435188F84A71E2E70020BDE8F0811E +:10B4E000D2480178491E4BB2002BB8BF704770B4E8 +:10B4F0005FF0000500EBC30191F84A1111F0010F54 +:10B500003BD04278D9B2521E427000EBC10282F8A1 +:10B510004A5190F802C00022BCF1000F0BD98418E8 +:10B5200094F803618E4202D1102A26D103E0521C06 +:10B53000D2B29445F3D80278521ED2B202708A4237 +:10B540001BD000EBC20200EBC10CD2F84341CCF897 +:10B550004341D2F84721CCF84721847890F800C0C5 +:10B560000022002C09D9861896F8036166450AD195 +:10B57000102A1CBF024482F80311591E4BB2002B43 +:10B58000B8DA70BC7047521CD2B29442EBD8F4E7E0 +:10B590002DE9F05F1F4690460E46814600F0B2FA54 +:10B5A000A24D0446102830D0A878002100280ED9DA +:10B5B0006A1892F80331A34205D110291CBF12204A +:10B5C000BDE8F09F03E0491CC9B28842F0D80828C2 +:10B5D00034D2102C1CD0AE781022701CA87005EB51 +:10B5E000061909F10300414600F0A2FF09F18300AA +:10B5F0001022394600F09CFFA819002180F8034171 +:10B6000080F83B110846BDE8F09FA878082815D2BD +:10B610002C78CA46601C287005EBC4093068C9F84C +:10B620004401B0884FF0000BA9F84801102C28BF46 +:10B63000FFDF89F843A189F84AB1CCE70720BDE8CC +:10B64000F09F70B479488178491E4BB2002BBCBF83 +:10B6500070BC704703F0FF0C8178491ECAB282703B +:10B6600050FA83F191F8031194453ED000EB021596 +:10B6700000EB0C14D5F80360C4F80360D5F807603C +:10B68000C4F80760D5F80B60C4F80B60D5F80F60FC +:10B69000C4F80F60D5F88360C4F88360D5F887607C +:10B6A000C4F88760D5F88B60C4F88B60D5F88F50EC +:10B6B000C4F88F50851800EB0C0402EB420295F899 +:10B6C00003610CEB4C0C00EB420284F8036100EBCD +:10B6D0004C0CD2F80B61CCF80B61B2F80F21ACF82E +:10B6E0000F2195F83B2184F83B2100EBC10292F831 +:10B6F0004A2112F0010F33D190F802C00022BCF1B0 +:10B70000000F0BD9841894F803518D4202D1102AEE +:10B7100026D103E0521CD2B29445F3D80278521ECF +:10B72000D2B202708A421BD000EBC20200EBC10C05 +:10B73000D2F84341CCF84341D2F84721CCF8472115 +:10B74000847890F800C00022002C09D9851895F85B +:10B75000035165450BD1102A1CBF024482F8031126 +:10B76000591E4BB2002BBFF675AF70BC7047521C10 +:10B77000D2B29442EAD8F3E72E49487070472D4878 +:10B780004078704738B14AF2B811884203D8294945 +:10B790004880012070470020704726484088704745 +:10B7A00010B500F0AFF9102814D0204A014600204F +:10B7B00092F802C0BCF1000F0CD9131893F80331B2 +:10B7C0008B4203D1102818BF10BD03E0401CC0B24B +:10B7D0008445F2D8082010BD14498A78824286BF79 +:10B7E00001EB001083300020704710498A788242B4 +:10B7F00086BF01EB0010C01C002070470B4B93F874 +:10B8000002C084459CBF00207047184490F8030193 +:10B8100003EBC00090F843310B70D0F84411116075 +:10B82000B0F848019080012070470000F80E002019 +:10B830005A01002050010020FE4A114491F80321D2 +:10B84000FD490A7002684A6080880881704710B517 +:10B85000F8F74CFE002804BFFF2010BDBDE81040E3 +:10B86000F8F76ABEF3498A7882429CBF002070478D +:10B87000084490F8030101EBC00090F84A0100F081 +:10B88000010070472DE9F047EA4F0026B0463878AE +:10B89000002886BF4FF0080ADFF8A093BDE8F087C4 +:10B8A00007EBC80505F5A27195F8430100F02AF9E8 +:10B8B000102808BF544610D0B978002400290BD9AD +:10B8C0003A1992F80321824202D1102C05D103E0EB +:10B8D000621CD4B2A142F3D80824B878A04286BF33 +:10B8E00007EB0410C01C002095F84A1111F0010F5D +:10B8F00016D050B1082C04D2391991F83B11012906 +:10B9000003D0102100F0F1FD50B109F80640304697 +:10B91000731C95F8432105F5A271DEB2F9F700F822 +:10B9200008F1010000F0FF0838784045B8D8BDE8BC +:10B93000F0872DE9F041BF4C00263546A07800285D +:10B940008CBFBE4FBDE8F0816119C0B291F8038190 +:10B95000A84286BF04EB0510C01C002091F83B11E3 +:10B96000012903D0102100F0C0FD58B104EBC8003C +:10B97000BD5590F8432100F5A2713046731CDEB22C +:10B98000F8F7CEFF681CC5B2A078A842DCD8BDE8A5 +:10B99000F08110B5F8F7EEFF002804BF082010BDB5 +:10B9A000F8F7ECFFA549085C10BD0A46A24910B59E +:10B9B000497841B19F4B997829B10244D81CF8F7D6 +:10B9C00032FD012010BD002010BD9A4A01EB41015B +:10B9D00002EB41010268C1F80B218088A1F80F0138 +:10B9E00070472DE9F041934D07460024A8780028C0 +:10B9F00098BFBDE8F081C0B2A04213D905EB041096 +:10BA000010F183060ED01021304600F06EFD48B9CB +:10BA100004EB440005EB400000F20B113A463046BF +:10BA2000F9F73DFF601CC4B2A878A042E3D8BDE896 +:10BA3000F08101461022824800F07ABD80487047AC +:10BA400070B57C4D0446A878A04206D905EB0410D9 +:10BA50001021833000F049FD08B1002070BD04EBD7 +:10BA6000440005EB400000F20B1070BD71498A786C +:10BA7000824206D9084490F83B01002804BF012007 +:10BA80007047002070472DE9F0410E4607461546E5 +:10BA90000621304600F029FD664C98B1A17871B1BD +:10BAA00004F59D7011F0010F18BF00F8015FA17837 +:10BAB000490804D0457000F8025F491EFAD1012000 +:10BAC000BDE8F0813846314600F01CF8102816D049 +:10BAD000A3780021002B12D9621892F80321824228 +:10BAE00009D1102918BF082909D0601880F83B51E6 +:10BAF0000120BDE8F081491CC9B28B42ECD800207E +:10BB0000BDE8F0812DE9F0414A4D06460024287831 +:10BB10000F46002812D900BF05EBC40090F843116E +:10BB2000B14206D10622394600F5A27008F014FB96 +:10BB300038B1601CC4B22878A042EDD81020BDE80E +:10BB4000F0812046BDE8F0813A4910B44A7801EB13 +:10BB5000C003521E4A70002283F84A2191F802C0A5 +:10BB6000BCF1000F0DD98B1893F80341844204D126 +:10BB7000102A1CBF10BC704703E0521CD2B294457F +:10BB8000F1D80A78521ED2B20A70824204BF10BCA9 +:10BB9000704701EBC00301EBC202D2F843C1C3F806 +:10BBA00043C1D2F84721C3F847218C7891F800C0EF +:10BBB0000022002C9CBF10BC70478B1893F80331F7 +:10BBC000634506D1102A1CBF114481F8030110BC43 +:10BBD0007047521CD2B29442EFD810BC704770B478 +:10BBE00014490D188A78521ED3B28B7095F8032130 +:10BBF000984247D001EB031C01EB0014DCF8036012 +:10BC0000C4F80360DCF80760C4F80760DCF80B6078 +:10BC1000C4F80B60DCF80F60C4F80F60DCF88360D8 +:10BC2000C4F88360DCF88760C4F88760DCF88B6058 +:10BC300008E00000F80E0020500100205A0100200A +:10BC4000BB100020C4F88B60DCF88FC0C4F88FC034 +:10BC500001EB030C03EB43039CF8034100EB4000B2 +:10BC600001EB430385F8034101EB4000D3F80B419E +:10BC7000C0F80B41B3F80F31A0F80F319CF83B012D +:10BC800085F83B0101EBC20090F84A0110F0010F6A +:10BC90001CBF70BC704700208C78002C0DD90B188D +:10BCA00093F803C1944504D110281CBF70BC7047A1 +:10BCB00003E0401CC0B28442F1D80878401EC0B2F4 +:10BCC0000870904204BF70BC704701EBC20301EBE7 +:10BCD000C000D0F843C1C3F843C1D0F84701C3F84E +:10BCE00047018C780B780020002C9CBF70BC7047FB +:10BCF00001EB000C9CF803C19C4506D110281CBF29 +:10BD0000084480F8032170BC7047401CC0B28442D4 +:10BD1000EED870BC7047000010B50A7B02F01F021D +:10BD20000A73002202768B181B7A03F0010C5B0861 +:10BD300003F00104A4445B0803F00104A4445B087D +:10BD400003F00104A4445B0803F0010464444FEAD7 +:10BD5000530C0CF0010323444FEA5C0C0CF001047B +:10BD6000234403EB5C0300EB020C521C8CF81330F1 +:10BD700090F818C0D2B263440376052AD3D3D8B260 +:10BD8000252888BFFFDF10BD0023C383428401EB59 +:10BD9000C202521EB2FBF1F10184704770B46FF021 +:10BDA0001F02010C02EA90251F23A1F5AA40543876 +:10BDB0001CBFA1F5AA40B0F1550009D0A1F528504B +:10BDC000AA381EBFA1F52A40B0F1AA00012000D177 +:10BDD00000204FF0000C62464FEA0C048CEA01068A +:10BDE000F6431643B6F1FF3F11D005F001064FEAC6 +:10BDF0005C0C4CEAC63C03F0010652086D085B0877 +:10BE0000641C42EAC632162CE8D370BC704770BC82 +:10BE1000002070472DE9F04701270025044603293B +:10BE20000FD04FF4FA4200297CD0012900F006819E +:10BE3000022918BFBDE8F0870146BDE8F047583039 +:10BE40006AE704F158067821304608F052FAB571D5 +:10BE5000F57135737573F573357475717576B576DF +:10BE6000212086F83E00412086F83F00FE2086F81B +:10BE7000730084F82C50258484F8547084F855702D +:10BE8000282084F856001B20208760874FF4A47078 +:10BE9000E087A0871B20208660864FF4A470E08690 +:10BEA000A0861B20A4F84000A4F844004FF4A4701E +:10BEB000A4F84600A4F842001B20A4F84A00A4F805 +:10BEC0004C00A4F8480067734FF448606080A4F801 +:10BED000D050A4F8D250A4F8D450A4F8D650A4F866 +:10BEE000D850A4F8DA5084F8DD5084F8DF50A4F874 +:10BEF000E65084F8E450A4F8F850A4F8FA5084F816 +:10BF00009A5184F89B5184F8A45184F8A55184F87F +:10BF1000695184F8705184F8735184F88C51BDE8EC +:10BF2000F087FFE7A4F8E65084F8DE506088FE4909 +:10BF30000144B1FBF0F1A4F878104BF68031A4F87D +:10BF40007A10E388A4F87E50B4F882C0DB000CFBC2 +:10BF500000FCB3FBF0F39CFBF0FC5B1CA4F882C07C +:10BF60009BB203FB00FC04F15801A4F88030BCF53F +:10BF7000C84FC4BF5B1E0B85B2FBF0F2521CCA85D2 +:10BF800000F5802202F5EE32531EB3FBF0F20A8474 +:10BF9000CB8B03FB00F2B2FBF0F0C883214604F127 +:10BFA0005800FFF7B9FE07F0A5F9E8B3D4F80E1072 +:10BFB0006FF01F02080C02EA91281F26A0F5AA4183 +:10BFC00054391CBFA0F5AA41B1F155010AD0A0F522 +:10BFD0002851AA391EBFA0F52A41B1F1AA014FF09C +:10BFE000010901D14FF00009002211464FEA020C6D +:10BFF00082EA0003DB430B43B3F1FF3F1AD008F0A2 +:10C000000103520842EAC33206F0010349087608E8 +:10C010000CF1010C41EAC3314FEA5808BCF1160F8C +:10C02000E6D3B9F1000F00E000E003D084F86851D6 +:10C03000BDE8F08784F86871BDE8F087A4F8E650A1 +:10C04000B4F89401B4F89831B4F802C004F158017E +:10C05000A4F87E50B4F88240DB0004FB0CF4B3FB80 +:10C06000F0F394FBF0F45B1C4C859BB203FB00F4F3 +:10C070000B85B4F5C84FC4BF5B1E0B85B2FBF0F255 +:10C08000521CCA854A8C00EBC202521EB2FBF0F26F +:10C090000A84CA8B02FB0CF2B2FBF0F0C883BDE845 +:10C0A000F08770B50025044603290DD04FF4FA42FD +:10C0B000002963D001297DD0022918BF70BD014637 +:10C0C000BDE87040583027E604F158067821304624 +:10C0D00008F00FF9B571F57135737573F573357433 +:10C0E00075717576B576212086F83E00412086F878 +:10C0F0003F00FE2086F8730084F82C502584012030 +:10C1000084F8540084F85500282184F856101B2127 +:10C11000218761874FF4A471E187A1871B212186C4 +:10C1200061864FF4A471E186A1861B21A4F840101A +:10C13000A4F844104FF4A471A4F84610A4F84210D7 +:10C140001B21A4F84A10A4F84C10A4F848106073FE +:10C15000A4F8D850202084F8DA0084F8D050C4F82D +:10C16000D45084F8045184F8055184F80E5184F8B1 +:10C170000F5184F8F45084F8005170BD60886A490A +:10C180000144B1FBF0F1A4F878104BF68031A4F82B +:10C190007A10E388A4F87E50B4F882C0DB000CFB70 +:10C1A00000FC9CFBF0FCB3FBF0F304F15801A4F895 +:10C1B00082C000E022E05B1C9BB203FB00FCA4F801 +:10C1C0008030BCF5C84FC4BF5B1E0B85B2FBF0F2DC +:10C1D000521CCA8500F5802202F5EE32531EB3FBD5 +:10C1E000F0F20A84CB8B03FB00F2B2FBF0F0C883C1 +:10C1F000214604F15800BDE870408DE5D4F8F830D0 +:10C20000B4F802C004F158005989DB89A4F87E50C3 +:10C21000B4F88240DB0004FB0CF4B3FBF1F394FBB5 +:10C22000F1F45B1C44859BB203FB01F40385B4F578 +:10C23000C84FC4BF5B1E0385B2FBF1F2521CC2851E +:10C24000428C01EBC202521EB2FBF1F20284C28B9D +:10C2500002FB0CF2B2FBF1F1C18370BD2DE9F003DA +:10C26000047E0CB1252C03D9BDE8F00312207047E1 +:10C27000002A02BF0020BDE8F003704791F80DC00E +:10C280001F260123294D4FF00008BCF1000F77D085 +:10C29000BCF1010F1EBF1F20BDE8F0037047B0F8CE +:10C2A00000C00A7C8F7B91F80F907A404F7C87EA20 +:10C2B000090742EA072282EA0C0C00270CF0FF096A +:10C2C0004FEA1C2C99FAA9F99CFAACFC4FEA1969BF +:10C2D0004FEA1C6C49EA0C2C0CEB0C1C7F1C9444A0 +:10C2E000FFB21FFA8CFC032FE8D38CEA020C0F4F2D +:10C2F0000022ECFB057212096FF0240502FB05C257 +:10C30000D2B201EBD207427602F007053F7A03FA78 +:10C3100005F52F4218BF82767ED104FB0CF2120C79 +:10C32000521CD2B2002403E0FFDB050053E4B36EDD +:10C3300000EB040C9CF813C094453CBFA2EB0C022C +:10C34000D2B212D30D194FF0000C2D7A03FA0CF76C +:10C350003D421CBF521ED2B2002A6AD00CF1010C21 +:10C360000CF0FF0CBCF1080FF0D304F1010C0CF041 +:10C37000FF04052CD7D33046BDE8F0037047FFE734 +:10C3800090F819C00C7E474604FB02C2FA4C4FF0ED +:10C39000000CE2FB054C4FEA1C1C6FF024040CFB64 +:10C3A0000422D2B201EBD204427602F0070C247AC6 +:10C3B00003FA0CFC14EA0C0F1FBF82764046BDE85E +:10C3C000F003704790F818C0B2FBFCF40CFB142289 +:10C3D000521CD2B25FF0000400EB040C9CF813C0B6 +:10C3E00094453CBFA2EB0C02D2B212D30D194FF010 +:10C3F000000C2D7A03FA0CF815EA080F1CBF521E28 +:10C40000D2B27AB10CF1010C0CF0FF0CBCF1080FA8 +:10C41000F0D304F1010C00E00EE00CF0FF04052C59 +:10C42000DAD3A8E70CEBC40181763846BDE8F00307 +:10C4300070470CEBC40181764046BDE8F0037047BD +:10C44000CE4A016812681140CD4A1268114301605A +:10C45000704730B4CB49C94B00244FF0010C0A7827 +:10C46000521CD2B20A70202A08BF0C700D781A68CC +:10C470000CFA05F52A42F2D0097802680CFA01F1AB +:10C480005140016030BC7047017931F01F0113BF8A +:10C49000002000221146704710B4435C491C03F091 +:10C4A000010C5B0803F00104A4445B0803F00104E1 +:10C4B000A4445B0803F00104A4445B0803F00104F6 +:10C4C000A4445B0803F001045B08A44403F00104E6 +:10C4D000A4440CEB53031A44D2B20529DDDB012A34 +:10C4E0008CBF0120002010BC704730B40022A1F1A5 +:10C4F000010CBCF1000F11DD431E11F0010F08BF4C +:10C5000013F8012F5C785FEA6C0C07D013F8025F18 +:10C5100022435C782A43BCF1010CF7D1491E5CBF71 +:10C52000405C0243002A0CBF0120002030BC704751 +:10C53000130008BF704710B401EB030CD41A1CF8A9 +:10C5400001CC5B1E00F804C013F0FF03F4D110BC53 +:10C550007047F0B58DB0164610251C466A46AC46AD +:10C5600000EB0C03A5EB0C0713F8013CD355ACF121 +:10C57000010313F0FF0CF3D115461032102084464E +:10C580000B18ACEB000713F8013C401ED35510F01C +:10C59000FF00F5D1284606F02FFD86B1102005F1E9 +:10C5A000200201461318A1EB000C13F8013C401EB9 +:10C5B00004F80C3010F0FF00F4D10DB0F0BD089875 +:10C5C0002060099860600A98A0600B98E0600DB048 +:10C5D000F0BD38B505460C466846F8F79EFD0028C4 +:10C5E00008BF38BD9DF900202272A07E607294F9C8 +:10C5F0000A100020511A48BF494295F82D308B424D +:10C60000C8BF38BDFF2B08BF38BDE17A491CC9B28D +:10C61000E17295F82E30994203D8A17A7F2918BF8C +:10C6200038BDA2720020E072012038BD0C2818BF6E +:10C630000B2810D00D2818BF1F280CD0202818BF99 +:10C64000212808D0222818BF232804D024281EBF60 +:10C65000262800207047012070470C2963D2DFE8AC +:10C6600001F006090E13161B323C415C484E002AAD +:10C670005BD058E0072A18BF082A56D053E00C2A8E +:10C6800018BF0B2A51D04EE00D2A4ED04BE0A2F13C +:10C690000F000C2849D946E023B1A2F110000B2865 +:10C6A00043D940E0122A18BF112A3ED090F8360034 +:10C6B00020B1122A37D31A2A37D934E0162A32D3B6 +:10C6C0001A2A32D92FE0A2F10F0103292DD990F8AF +:10C6D000360008B31B2A28D925E0002B08BF042AFE +:10C6E00021D122E013B1062A1FD01CE0012A1AD161 +:10C6F0001BE01C2A1CBF1D2A1E2A16D013E01F2A6D +:10C7000018BF202A11D0212A18BF222A0DD0232A8F +:10C710001CBF242A262A08D005E013B10E2A04D013 +:10C7200001E0052A01D000207047012070472DE963 +:10C73000F04187680D4604462046F6F736FC98B16E +:10C7400015B33846A168F6F771FF00281CDD2844B0 +:10C75000401EB0FBF5F606FB05F13846F5F761FF24 +:10C76000A0603046BDE8F081F6F752FA40F233712E +:10C77000F5F757FFA060DFE753E4B36EA44802006B +:10C78000A8480200620100200020BDE8F08190422C +:10C7900028BF704770B50446101B642838BF64205A +:10C7A00025188D4205D8F6F774FF00281CBF2846CF +:10C7B00070BD204670BD808E7047C08E70470844A3 +:10C7C00018449830002A14BF0421002108447047FF +:10C7D00030B491F854300A8E13F00C0F4FF4747C7F +:10C7E0001CBF0CEB821292B21DD08B8E934238BFCD +:10C7F0001A464B8E91F8554014F00C0F1CBF0CEBF1 +:10C8000083139BB217D0C98E994238BF0B460028BC +:10C810000CBF01200020D1189831002818BF042037 +:10C82000084430BC7047022B07BF92003C32D20054 +:10C83000703292B2D9E7022C07BF9B003C33DB0079 +:10C8400070339BB2DFE710F0010F1CBF012070476F +:10C8500010F0020F1CBF0220704710F0040018BF38 +:10C86000082070472DE9F041054617468846012605 +:10C87000084600F06EFC0446404600F06EFC03469D +:10C8800010F0010F18BF012008D113F0020F18BFDC +:10C89000022003D113F0040018BF082014F0010F88 +:10C8A00018BF4FF0010C20D050EA0C0108BF002641 +:10C8B00013F0030F08BF002014F0030F08BF4FF060 +:10C8C000000C95F85410814208BF0020387095F88C +:10C8D0005510614508BF4FF0000C87F801C00028D3 +:10C8E00008BFBCF1000F1CD10DE014F0020F18BFFF +:10C8F0004FF0020CD8D114F0040F14BF4FF0080C05 +:10C900004FF0000CD0E7404600F02DFCB5F8581071 +:10C91000401A00B247F6FE71884201DC002800DCB4 +:10C9200000263046BDE8F08101281CBF0228002007 +:10C93000704718B4CBB2C1F3072CC1B2C0F30720C3 +:10C94000012B05D0022B08BFBCF1020F1BD002E067 +:10C95000BCF1010F17D0012904D0022908BF022819 +:10C9600011D001E001280ED001EA0C0161F30702A9 +:10C9700010EA030060F30F22D0B210F0020F18BFCC +:10C9800002200BD106E0084003EA0C01084060F3E6 +:10C990000702EFE710F0010018BF01208DF800003A +:10C9A000C2F3072010F0020F18BF022003D110F0CD +:10C9B000010018BF01208DF80100BDF8000018BC6F +:10C9C0007047162A10D12A220C2818BF0D280FD024 +:10C9D0004FF0230C1F280DD031B10878012818BF63 +:10C9E000002805D0162805D0002070470120704788 +:10C9F0001A70FBE783F800C0F8E7012902D002298A +:10CA000005D007E0002804BF40F2E240704740F63E +:10CA1000C410704700B5FFDF40F2E24000BD0000E7 +:10CA2000282107F044BC4078704730B505460078AF +:10CA300001F00F0220F00F0010432870092910D2D6 +:10CA4000DFE801F0050705070509050B0D000624C1 +:10CA500009E00C2407E0222405E0012403E00E2471 +:10CA600001E00024FFDF6C7030BD007800F00F00A3 +:10CA700070470A68C0F803208988A0F8071070473B +:10CA8000D0F803200A60B0F80700888070470A6871 +:10CA9000C0F809208988A0F80D107047D0F8092047 +:10CAA0000A60B0F80D00888070470278402322F0B9 +:10CAB000400203EA81111143017070470078C0F30E +:10CAC000801070470278802322F0800203EAC111AF +:10CAD0001143017070470078C0097047027802F076 +:10CAE0000F02072A16BF082AD0F80520D0F8032025 +:10CAF000C1F809200CBFB0F80920B0F80720A1F850 +:10CB00000D200A7822F080020A700078800942EA3B +:10CB1000C0100870704770B514460E4605461F2AAF +:10CB200088BFFFDF2246314605F1090007F040FBD0 +:10CB3000A01D687070BD70B544780E460546062C81 +:10CB400038BFFFDFA01F84B21F2C88BF1F242246DE +:10CB500005F10901304607F02BFB204670BD70B58A +:10CB600014460E4605461F2A88BFFFDF224631467F +:10CB700005F1090007F01CFBA01D687070BD70B5C1 +:10CB800044780E460546062C38BFFFDFA01F84B24E +:10CB90001F2C88BFFFDF224605F10901304607F050 +:10CBA00007FB204670BD0968C0F80F1070470A885F +:10CBB000A0F8132089784175704790F8242001F07F +:10CBC0001F0122F01F02114380F82410704707292B +:10CBD00088BF072190F82420E02322F0E00203EA36 +:10CBE0004111114380F8241070471F3007F096BCA4 +:10CBF00010B5044600F0E3FA002818BF204410BD29 +:10CC0000C17811F03F0F1BBF027912F0010F002213 +:10CC1000012211F03F0F1BBF037913F0020F002315 +:10CC200001231A4402EB4202530011F03F0F1BBFD5 +:10CC3000027912F0080F0022012203EB420311F0E7 +:10CC40003F0F1BBF027912F0040F00220122134490 +:10CC500011F03F0F1BBF027912F0200F00220122BA +:10CC600002EBC20203EB420311F03F0F1BBF02793C +:10CC700012F0100F0022012202EB42021A4411F0BE +:10CC80003F0F1BBF007910F0400F0020012010441F +:10CC900010F0FF0014BF012100210844C0B270470A +:10CCA00070B50278417802F00F02082A4DD2DFE811 +:10CCB00002F004080B4C4C4C0F14881F1F280AD993 +:10CCC00043E00C2907D040E0881F1F2803D93CE02F +:10CCD000881F1F2839D8012070BD4A1E242A34D845 +:10CCE0008446C07800258209032A09D000F03F0459 +:10CCF000601C884204D86046FFF782FFA04201D939 +:10CD0000284670BD9CF803004FF0010610F03F0F5D +:10CD10001EBF1CF10400007810F0100F13D0644601 +:10CD20000421604600F04BFA002818BF14EB000005 +:10CD3000E6D0017801F03F012529E1D28078022177 +:10CD4000B1EB501FDCD3304670BD002070BDC07801 +:10CD5000800970470178002201F00F030121042BA4 +:10CD60000BD0082B1CBF0020704743780E2B04BF4C +:10CD7000C3785FEA931C04D106E04078801F1F2827 +:10CD800000D911460846704713F03F0F1EBF0079C7 +:10CD900010F0010F10F0020FF4D1F2E710B4017897 +:10CDA00001F00F01032920D0052921D14478B0F8E2 +:10CDB0001910B0F81BC0B0F81730827D222C17D1A3 +:10CDC000062915D3B1F5486F98BFBCF5FA7F0FD28D +:10CDD00072B1082A98BF8A420AD28B429CBFB0F82F +:10CDE0001D00B0F5486F03D805E040780C2802D04C +:10CDF00010BC0020704710BC012070472DE9F041A5 +:10CE00001F4614460D00064608BFFFDF2146304688 +:10CE100000F0D5F9040008BFFFDF30193A46294673 +:10CE2000BDE8F04107F0C4B9C07800F03F0070479A +:10CE3000C02202EA8111C27802F03F021143C170A0 +:10CE40007047C9B201F00102C1F340031A4402EB7A +:10CE50004202C1F3800303EB4202C1F3C00302EBC1 +:10CE60004302C1F3001303EB43031A44C1F340131D +:10CE700003EBC30302EB4302C1F380131A4412F025 +:10CE8000FF0202D0521CD2B20171C37802F03F01FE +:10CE900003F0C0031943C170511C417070472DE964 +:10CEA000F0410546C078164600F03F04C4F1240066 +:10CEB0000F46B042B8BFFFDF281932463946001D81 +:10CEC00007F076F9A019401C6870BDE8F0812DE9E3 +:10CED000F04105464478C0780F4600F03F06002C2C +:10CEE00008BFFFDFA01B401E84B21F2C88BF1F2479 +:10CEF0002FB1A819011D2246384607F059F92046DE +:10CF0000BDE8F0814078704700B5027801F0030376 +:10CF100022F003021A430270012914BF02290021E2 +:10CF200004D0032916BFFFDF012100BD417000BD01 +:10CF300000B5027801F0030322F003021A430270E5 +:10CF4000012914BF0229002104D0032916BFFFDFE5 +:10CF5000012100BD417000BD007800F00300704762 +:10CF6000417889B1C0780E2818BF0F2803D0102847 +:10CF700018BF192802D3FB2904D905E0BF4A105C69 +:10CF8000884201D1012070470020704730B501244C +:10CF90000546C17019293CBFB848445C02D3FF293B +:10CFA00018BFFFDF6C7030BD70B515460E460446E5 +:10CFB0001B2A88BFFFDF65702A463146E01CBDE8AA +:10CFC000704007F0F5B8B0F807007047B0F80900F6 +:10CFD0007047C172090A01737047B0F80B007047BF +:10CFE00030B4B0F80720A64DB0F809C0B0F805304D +:10CFF0000179941F2D1998BFBCF5FA7F0ED269B143 +:10D00000082998BF914209D293429FBFB0F80B0004 +:10D01000B0F5486F012030BC98BF7047002030BC8D +:10D020007047001D07F07ABA021D0846114607F046 +:10D0300075BAB0F809007047007970470A68426015 +:10D0400049688160704742680A608068486070473C +:10D050000988818170478089088070470A68C0F814 +:10D060000E204968C0F812107047D0F80E200A60F0 +:10D07000D0F81200486070470968C0F81610704771 +:10D08000D0F81600086070470A68426049688160FD +:10D09000704742680A608068486070470968C160EC +:10D0A0007047C06808607047007970470A6842603E +:10D0B00049688160704742680A60806848607047CC +:10D0C0000171090A417170478171090AC171704784 +:10D0D0000172090A417270478172090AC172704770 +:10D0E00080887047C08870470089704740897047C2 +:10D0F00001891B2924BF4189B1F5A47F07D3818809 +:10D100001B2921BFC088B0F5A47F012070470020F3 +:10D1100070470A68426049688160704742680A60E7 +:10D12000806848607047017911F0070F1BBF407994 +:10D1300010F0070F002001207047017911F0070F50 +:10D140001BBF407910F0070F0020012070470171CC +:10D15000704700797047417170474079704781711D +:10D16000090AC1717047C088704746A282B0D2E9EF +:10D170000012CDE900120179407901F007026946F9 +:10D180001DF80220012A07D800F00700085C0128DA +:10D190009EBF012002B07047002002B070470171AD +:10D1A000704700797047417170474079704730B5DA +:10D1B0000C460546FB2988BFFFDF6C7030BDC37885 +:10D1C000024613F03F0008BF70470520127903F0B4 +:10D1D0003F0312F0010F36D0002914BF0B20704717 +:10D1E00012F0020F32D0012914BF801D704700BF1A +:10D1F00012F0040F2DD0022914BF401C704700BF4D +:10D2000012F0080F28D0032914BF801C704700BFFC +:10D2100012F0100F23D0042914BFC01C704700BFA8 +:10D2200012F0200F1ED005291ABF1230C0B270476D +:10D2300012F0400F19D006291ABF401CC0B2704727 +:10D24000072918D114E00029CAD114E00129CFD14F +:10D2500011E00229D4D10EE00329D9D10BE0042931 +:10D26000DED108E00529E3D105E00629E8D102E096 +:10D27000834288BF7047002070470000AC4802001E +:10D2800086F3FFFF00010102010202032DE9F041D4 +:10D29000FA4D0446284600216A78806801270E4628 +:10D2A00012B1012A1ED006E090F86620002A18BFAD +:10D2B0006F7000D001216A78C2EB421200EB42028B +:10D2C00092F82830194324D0667090F8D90002F102 +:10D2D0002A0170B12A22201D06F06AFF0420207066 +:10D2E00027710DE090F82820002A18BF6E70E1D158 +:10D2F000E1E73C22201D06F05BFF0520207027712E +:10D300006878A968C0EB401001EB400080F8286005 +:10D310001DE090F8A410E9B190F8D900012818BFD9 +:10D32000FFDFA868D0F8A5106160D0F8A910A1604F +:10D33000D0F8AD10E160D0F8B110216190F8B510CF +:10D340002175667013212170277180F8A460012077 +:10D35000BDE8F08190F82210012922D0017801293E +:10D360001CBF0020BDE8F081667014212170811C73 +:10D370002022201D06F01CFF2672A9680E70C048EE +:10D3800082888284D0F8C420527B80F8262080F8DE +:10D390002270D1F8C4000088F3F73CFCF3F7E3F8FF +:10D3A000D5E7667007212170416A616080F82260CC +:10D3B000CDE7B24880680178002914BF80884FF615 +:10D3C000FF7070472DE9F84F4FF000088946064678 +:10D3D0000127CDF80080FFF748FBBDF80010A74DEE +:10D3E00021F06004ADF8004008284FD2DFE800F0DB +:10D3F00004070D4E184E132C44F003000DE044F0CA +:10D400001500ADF80000474641E044F0100000BFB1 +:10D41000ADF800003BE044F0020040F01000F7E7F8 +:10D42000A86890F8E000052818BFFFDF44F01A0054 +:10D43000ADF80000A96891F8E710002914BF40F08A +:10D44000010020F00100E3E7A86890F8E01003294C +:10D450000AD090F8E010062958D090F8E00004288F +:10D4600018BFFFDF5FD012E03046FFF770FC0028E6 +:10D4700018BFFFDF0AD1F07810F03F0F1FBF3079DF +:10D4800010F0020F44F00400ADF800004746BDF86C +:10D4900000000090BDF80000C0F3C00BA868CBEB03 +:10D4A0004B1A00EB4A0090F82800002818BFBDE88E +:10D4B000F88F3046FFF7D9FA80467048806800EB55 +:10D4C0004A0190F8C90001F12A04012808BF01258A +:10D4D00003D0022814BFFFDF0225257300206073EC +:10D4E0006648806890F8E11084F83B10FF21A17332 +:10D4F0007F21E176BDF80010618190F8E0100429E9 +:10D500001CBF90F8E01006293AD044E044F00A012C +:10D51000ADF8001090F8FA00002814BF41F00400A4 +:10D5200021F0040074E73046FFF711FCD8B1012860 +:10D5300004BF44F00100ADF8000014D0022818BF69 +:10D54000FFDFA4D144F00200ADF80000A96891F813 +:10D55000FA10002914BF40F0040020F00400ADF8D8 +:10D560000000474693E7F07810F03F0F1FBF307977 +:10D5700010F0020FBDF8000040F0040087D047E72C +:10D5800090F8E200012808BF012503D0022814BF4B +:10D59000FFDF0225657304F10900384D00902878FB +:10D5A0007F2808BFFFDF2978009801707F2028704E +:10D5B0006FB1B8F1070F04F11C01304603D2FFF739 +:10D5C000BAFA207239E0FFF782FC207204E00020F2 +:10D5D0002072B8F1070F30D3B8F1070F0DD1A8684A +:10D5E00090F8F91001B3D0F8EA10C4F80210B0F8BE +:10D5F000EE10E18090F8F0006070A07A10F0040F57 +:10D600000ED0A86890F8FA10E9B190F8F7102175DB +:10D61000D0F8F110C4F81510B0F8F500A4F819000E +:10D62000B8F1070F38D098E0F07810F03F0F1ABF2C +:10D63000307910F0010FFF20DED0621CA11C3046B3 +:10D6400001F071FDD9E7B8F1070F1CBFB8F1010F68 +:10D65000FFDFB9F1000F08BFFFDF99F80000207568 +:10D66000B8F1010F03D0B8F1070F0BD075E004F14A +:10D6700015013046FFF712FA6FE000006401002048 +:10D68000CC10002001213046FFF7B2FA0168C4F83F +:10D6900015108088A4F81900F07810F03F0F1CBF17 +:10D6A000317911F0080F1AD0A86890F8E020042A08 +:10D6B00006D090F8E000032811D111F0100F0ED021 +:10D6C00003213046FFF794FA407803210009A07344 +:10D6D0003046FFF78DFA0088C0F30B002082F07807 +:10D6E00010F03F0F1CBF307910F0400F13D0FA48F4 +:10D6F000FFF72DFBA96891F8E020032A14D006213A +:10D700003046FFF775FA0078E076A86890F8E010E8 +:10D71000062922D118E0A86890F8FB10002918BF4C +:10D7200090F8F800F0D1F0E791F8C910042914BF7F +:10D7300008290028E3D1F07810F03F0F1CBF3079A2 +:10D7400010F0080FDBD1E0E790F8E9100909A173A8 +:10D75000B0F8E800C0F30B002082A968012001EBBB +:10D760004A0181F82800BBF1000F14BF06200520F4 +:10D77000BDE8F84F03F0F4B82DE9F041D74DAA68A1 +:10D7800092F8D930002B6ED07F27012611B109788D +:10D79000FE2914D0804692F82800002818BFBDE862 +:10D7A000F08102F12A044046FFF75FF900210828C2 +:10D7B00079D2DFE800F0515356787878595CC64C3E +:10D7C00092F8A400002818BFBDE8F08182F8A66096 +:10D7D00092F8DD0018B1F6F76CFE012829D020463A +:10D7E000FFF76CF90146A86880F8A71000F1A801BE +:10D7F0002046FFF745F92046FFF76DF90146A86876 +:10D8000080F8AE1000F1AF012046FFF747F9A86895 +:10D8100000F1B50428787F2808BFFFDF2878207042 +:10D820002F70A86880F8A460BDE8F041052003F0DF +:10D8300097B8F6F781FEA96801F1A802A731FDF7B4 +:10D84000DDFF002808BFFFDFA86890F8A71041F0AF +:10D85000020180F8A710CEE7A17209E0A67221723A +:10D860000CE0032001E021E00220A07200E0FFDFD5 +:10D8700004F10B014046FFF75EF92072621CA11C07 +:10D88000404601F050FC287809347F2808BFFFDFAC +:10D89000287820702F70A86880F82860BDE8F041D3 +:10D8A000052003F05DB82172BDE8F081BDE8F041CC +:10D8B00088E570B5894C0022A06890F8C910104620 +:10D8C00002F0A8FE002831D0F7F735FBA0688449A4 +:10D8D00090F8DF000D5C2846F7F75CF8A06880F848 +:10D8E000E15090F8C910082916BF04290F202520FF +:10D8F000F6F75DFFA068002190F8C9200120F7F736 +:10D9000050F97548F7F720FBA068D0F80001F7F749 +:10D910001EFBA06890F8C91080F8E21090F8C800CB +:10D92000032814BF0228012908D103E0BDE8704094 +:10D9300001F032BC08210020F7F707FCA06890F83E +:10D94000C91080F8E210F7F7DDFBA06890F8DD0061 +:10D9500020B1F6F77AFD4020F7F7A8FBA168032075 +:10D9600081F8E00070BD2DE9F0410F469046054674 +:10D970000321FFF73DF94078584C0209A06890F860 +:10D98000E91062F3071180F8E91003212846FFF738 +:10D990002FF90188A068B0F8E82061F30B02A0F825 +:10D9A000E82080F8E77090F8C910012905D090F8B8 +:10D9B000E000032808BFBDE8F081E8784FF00106D9 +:10D9C00010F03F0F1CBF287910F0400F09D006213E +:10D9D0002846FFF70DF90178A06880F8F81080F864 +:10D9E000FB60A06890F8E01003292AD0E97811F0D4 +:10D9F0003F0F1CBF297911F0010F08D000F1F00290 +:10DA0000911F284601F08FFBA06880F8F960E87844 +:10DA100010F03F0F1ABF287910F0020FBDE8F08117 +:10DA200001212846FFF7E4F8A1680268C1F8F12057 +:10DA30008088A1F8F50081F8F78081F8FA60BDE8E8 +:10DA4000F081022F18BF012FD0D1BDE8F08123490A +:10DA5000896881F80A01704770B5204DA86890F870 +:10DA6000E010022919BF90F8E010012900210C46AE +:10DA70001CBF0C2070BD00BFC1EB411200EB420285 +:10DA8000034682F82840491CC9B20229F4D3047025 +:10DA900080F8224093F8DD0030B1F7F719FBF6F774 +:10DAA000E8FCA86880F8DD40A868012180F8DC4027 +:10DAB00080F8C11080F8C84080F8DF40282180F845 +:10DAC0000B1180F80A41A0F8E34080F8E5400721F7 +:10DAD00080F8C010002070BDD81100206401002023 +:10DAE000D4480200F74810B58068002180F8E010A3 +:10DAF000012180F8E010FFF7AFFF002818BFFFDF1B +:10DB000010BD2DE9F047EF4C07460C26A06890F8B1 +:10DB1000E01001291FBF90F8E00002280C20BDE8AA +:10DB2000F087F6F778FEA06890F90A01F6F720FF73 +:10DB3000A06890F8C91080F8E21090F8C010012594 +:10DB4000002978D090F8C8004FF00009032802D0CF +:10DB5000022805D008E00521DB4801F0ADFB03E019 +:10DB60000321D94801F0A8FBA06890F8D81000293B +:10DB700004BF90F8DB00002843D0F5F749F80646CB +:10DB8000A0683146D0F8D400F5F750FDCF4990FB9E +:10DB9000F1F801FB180041423046F4F742FD01461E +:10DBA000A068C0F8D410D0F8D0104144C0F8D0100C +:10DBB000FDF7F3FD0146A068D0F8D020914220D8AF +:10DBC000C0E9349690F8DB0000281CBF0120FDF767 +:10DBD00008FF0121A06890F8DC20002A1CBF90F803 +:10DBE000D820002A0DD090F8B93000F1BA02012BEC +:10DBF00004D1527902F0C002402A14D0BA30F7F7AB +:10DC000085FEA06890F8B910BA30F6F769FE0F21CA +:10DC10000720F6F781FEA068002690F8E0100129A1 +:10DC200018D112E007E0FDF709FFA1682A46BA31D2 +:10DC3000F7F735FEE5E790F8E010022904BF80F819 +:10DC4000E0500C2006D1BDE8F08780F80451022195 +:10DC500080F8E010A06890F8C10088B1FDF769FE77 +:10DC600003219B48FDF7A1FE0146A06880F8DD1066 +:10DC7000C0F800719748F7F750F93046BDE8F087D3 +:10DC8000FDF700FEECE738B58E4CA06890F8E01088 +:10DC900002291CBF0C2038BD012180F80511A0F815 +:10DCA000081129208DF800006846F5F7F3FF30B120 +:10DCB000A0689DF8001090F80601884205D1A06880 +:10DCC00090F80601401C8DF80000A1689DF8000046 +:10DCD00081F806010220F7F734F97F48F6F752FE83 +:10DCE000A168DFF8F8C1002091F8C03091F8DF207A +:10DCF000521CACFB02546408A4EB8404224481F857 +:10DD0000DF2023FA02F212F0010F03D1401CC0B24F +:10DD10000328EBD3FFF7CDFD002038BD69498968A2 +:10DD200081F8C900002070476649896881F8DA00E7 +:10DD3000704710B5634CA36893F8B830022B14BF3A +:10DD4000032B00280BD100291ABF02290120002033 +:10DD50001146FDF725FD08281CBF012010BDA06855 +:10DD600090F8B800002816BF022800200120BDE866 +:10DD70001040F7F755BD5348806890F8B800002868 +:10DD800016BF022800200120F7F74ABD4D498968D7 +:10DD900081F8B80070474B49896881F8DC0070470A +:10DDA00070B5484CA16891F8B800002816BF022849 +:10DDB0000020012081F8B900BA31F7F71BFDA068F7 +:10DDC00090F8B810022916BF03290121002180F81C +:10DDD000DB1090F8B920002500F1BA03012A04BF36 +:10DDE0005B7913F0C00F0AD000F1BA03012A04D105 +:10DDF0005A7902F0C002402A01D0002200E001223C +:10DE000080F8D820002A04BF002970BDC0F8D05087 +:10DE1000F4F7FEFEA168C1F8D40091F8DB000028F9 +:10DE20001CBF0020FDF7DDFD0026A06890F8DC1087 +:10DE300000291ABF90F8D810002970BD90F8B920B9 +:10DE400000F1BA01012A04D1497901F0C001402949 +:10DE500005D02946BDE87040BA30F7F757BDFDF749 +:10DE6000EDFDA1683246BDE87040BA31F7F717BD45 +:10DE700070B5144D0C4600280CBF01230023A9687F +:10DE800081F8C13081F8CB004FF0080081F8CC0058 +:10DE90000CD1002C1ABF022C012000201146FDF7E6 +:10DEA0007FFCA968082881F8CC0001D0002070BD53 +:10DEB000022C14BF032C1220F8D170BD002818BF0B +:10DEC00011207047640100200012002040420F0022 +:10DED000D8110020D1480200D7480200ABAAAAAA54 +:10DEE0000328FE4A926808BFC2F8C41082F8C8002E +:10DEF0000020704710B5044602F018FF052809D02D +:10DF000002F014FF042805D0F448806880F8D94056 +:10DF1000002010BD0C2010BDF048816891F8C800A9 +:10DF2000032804D0012818BF022807D004E091F884 +:10DF3000CB00012808BF70470020704791F8CA0045 +:10DF4000012814BF03280120F6D1704710B5F7F758 +:10DF5000A1F8F7F780F8F6F77BFFF6F7E4FFDF4C60 +:10DF6000A06890F8DD0038B1F7F7B2F8F6F781FA5B +:10DF7000A168002081F8DD00A068012180F804116B +:10DF8000022180F8E010002010BDD449896881F892 +:10DF9000FC007047017801291CBF122070474278AD +:10DFA0000023032ACD49896808BFC1F8C43081F82D +:10DFB000C820012281F8C920C27881F8B8200279EE +:10DFC000002A16BF022A0123002381F8C13081F8FC +:10DFD000CA20427981F8C020807981F8DA000020D7 +:10DFE0007047BE488068704701F0D6B82DE9F84FF9 +:10DFF0004FF00008B948F7F790F8B84C4FF07F0A97 +:10E00000002808BF84F800A0F7F772F8B448FEF7BC +:10E010002CFDA070A16891F8E220012A18BFFFDF53 +:10E020000AD0A06890F8DD0018B1F7F751F8F6F7BC +:10E0300020FA4046BDE8F88FA94D0026A5F5867761 +:10E04000072836D291F8C10028B9F6F793FC0028CA +:10E0500008BF002600D00126A06890F8DD0080B13E +:10E06000FDF7F5FBA168FF2881F8DE000ED0014620 +:10E07000E81CFDF7E1FBA06890F8DE00FDF7F2FB7D +:10E080000643A06890F8DE00FF2817D1FDF781FC59 +:10E0900087F8DE0097F8C11081B108280ED12878E2 +:10E0A000E91CC0F38010FDF77BFB082818BF002691 +:10E0B00004E002BF91F8D90000280126A0784FF0B3 +:10E0C00000094FF0010B08281BD2DFE800F035AF44 +:10E0D000041A1A1A12F9002E00F06581A06890F84F +:10E0E000C800012818BF022840F05D81F6F7B0FE95 +:10E0F0007AE036B1A06890F8C800022806D001285E +:10E1000072D0F6F7A5FE4FF003088AE700217448A5 +:10E11000FFF732FBA0684FF00808C0F8E790C0F89E +:10E12000EB90C0F8EF90C0F8F390C0F8F79080F84B +:10E13000FB9080F8E79074E74FF00008002E00F0A5 +:10E140003281A26892F8C80002282DD001284BD055 +:10E1500003287FF466AFD2F8C400E978837E994241 +:10E160001BD12979C37E994217D16979037F9942DE +:10E1700013D1A979437F99420FD1E979837F9942DD +:10E180000BD1297AC37F994207D12978437EC1F305 +:10E190008011994208BF012100D0002192F8CB20C4 +:10E1A000012A26D0A9B3FBE000214D48FFF7E4FA8D +:10E1B000A06890F8051129B1491E11F0FF0180F8FF +:10E1C00005117CD1C0F8E790C0F8EB90C0F8EF9053 +:10E1D000C0F8F390C0F8F79080F8FB904FF0080873 +:10E1E00080F8E7B01DE7FFE700213D48FFF7C4FADC +:10E1F00019E0002965D100BF00F11A013848FEF787 +:10E200003FFC3748FEF75AFCA168D1F8C4104876A5 +:10E21000C6E0FFE797F8CC00082850D097F8DE104A +:10E2200081424ED0BFE04FF00308FAE6A06890F8B4 +:10E23000DB1000290CBF4FF0010B4FF0000B4FF02B +:10E240000008297805F10902C90907D0517901F0C0 +:10E25000C001402908BF4FF0010901D04FF000096B +:10E2600090F8C810032906D190F8C110002918BFF2 +:10E2700090F8CC0001D190F8DE00FDF7ADFA5FEA2E +:10E28000000A13D01021FEF730F9002818BF4FF014 +:10E29000010BB9F1000F04BFA06890F8B9A00DD030 +:10E2A00005F109015046F7F7C9FA8046A068B9F1AF +:10E2B000000F90F8B9A018BF4AF0020A02E072E01D +:10E2C0008CE06DE090F8C810032913D0F6F7C0FD7C +:10E2D000DEB3F6F71DFB50EA080003E064010020FE +:10E2E000D811002062D08DF800A06946FD48FFF7E4 +:10E2F00043FA98E7D0F8C400E978827E91421BD1B6 +:10E300002979C27E914217D16979027F914213D156 +:10E31000A979427F91420FD1E979827F91420BD155 +:10E32000297AC27F914207D12978407EC1F38011BA +:10E33000814208BF012500D0002597F8DE0008289B +:10E3400008D097F8CC10884200E02FE008BF4FF0CB +:10E35000010901D04FF00009B8F1000F05D1BBF160 +:10E36000000F04D0F6F7D4FA08B1012000E0002035 +:10E370004EB197F8CB10012903D021B955EA090114 +:10E3800001D0012100E0002108420CD0A06890F8E3 +:10E39000CB10012904BF002DD0F8C4003FF42CAFEE +:10E3A0004FF00A083DE6F6F753FD3CE7A06890F809 +:10E3B000CA00032818BF02287FF435AFB9F1000F57 +:10E3C0003FF431AFB8F1000F7FF42DAFC648694676 +:10E3D00040680090C348FFF7CFF924E7A06890F8A1 +:10E3E000DA0000283FF48DAEF6F732FDA06890F811 +:10E3F000D91000297FF417AFC0F8E790C0F8EB9070 +:10E40000C0F8EF90C0F8F390C0F8F79080F8FB9058 +:10E4100080F8F8A0B348FEF79AFCE8B301287CD056 +:10E4200002287FF400AFA0684FF0030890F8C800FE +:10E43000032814BF0020012036EA00003FF4F1ADAC +:10E44000A84D1820E97811F03F0F3FF4EAAD297983 +:10E4500088437FF4E6AD04212846FEF7C9FB064653 +:10E46000A06890F8E20002F0CCF80146304600F0D7 +:10E47000B5FE00283FF4D5AD002202212846FFF763 +:10E4800072FA2846FEF763FC0146A06880F8E610A1 +:10E490003188A0F8E31000E005E0B17880F8E510DD +:10E4A0004FF00408BDE5002E3FF4BDAEA06890F823 +:10E4B000C810012918BF02297FF4B5AE894DE9784B +:10E4C00011F03F0F1CBF297911F0020F05D011F098 +:10E4D000010F18BF4FF0010901D14FF000094FF0B3 +:10E4E0000008B9F1000F52D028780027C609012191 +:10E4F0002846FEF77DFB36B1407900F0C000402889 +:10E5000008BF012600D00026A06890F8C810032993 +:10E5100008D190F8C110002900E0AEE018BF90F8D3 +:10E52000CC0001D190F8DE00FDF756F95FEA000853 +:10E530000CD01021FDF7D9FF46B101212846FEF786 +:10E5400057FB01464046F7F779F90746A068002EC9 +:10E5500090F8B98018BF48F00208E87810F03F0F33 +:10E560001CBF287910F0020F0ED02846FEF7B3FA30 +:10E57000824601212846FEF73BFB5146F6F7B8F9E3 +:10E58000002818BF012000D1002038435FD0E87870 +:10E5900010F03F0F1EBF297911F0100F11F0080F76 +:10E5A00041D004212846FEF723FB0646A06890F8D8 +:10E5B000E20002F026F80146304600F00FFEA0B15E +:10E5C000424600212846FFF7CEF94648FEF7BFFB3A +:10E5D0000146A06880F8E6103188A0F8E310B17811 +:10E5E00080F8E5104FF004081BE5A06890F8E20001 +:10E5F00001287FF418AEE87810F03F0F1CBF28798F +:10E6000010F0010F3FF40FAEB9F1000F04D100215B +:10E610002846FEF7D7FE06E68DF8008069462846B4 +:10E62000FEF7D0FEFFE510F03F0F1CBF297911F077 +:10E63000100F7FF4F8AD10F03F0F1CBF287910F0D9 +:10E64000010F3FF4F0ADB9F1000FE5D1DFE7A068AD +:10E6500090F8CA00032818BF02287FF4E4AD002E0A +:10E660003FF4E1AD002F7FF4DEAD1F48694600683E +:10E6700000902846FEF7A6FED5E5002E3FF4D3AD68 +:10E68000184D1820E97811F03F0F3FF4CCAD2979EF +:10E6900088437FF4C8AD04212846FEF7A9FA064650 +:10E6A000A06890F8E20001F0ACFF0146304600F0AF +:10E6B00095FD00283FF4B7AD002201212846FFF761 +:10E6C00052F92846FEF743FB0146A06880F8E610A1 +:10E6D0003188A0F8E310B17880F8E5104FF0040815 +:10E6E0009FE40000D8110020C84802002DE9F04145 +:10E6F000FD4CA0680078002818BFFFDF0025A06847 +:10E7000001278570D0F8C4100A8882804A88428325 +:10E710008A888283C988C18380F82050F34990F8A1 +:10E72000DB20A1F59A764AB10A78C2F38013CA1C9D +:10E7300023B1527902F0C002402A33D090F8DC2095 +:10E7400042B111F8032BC2F380121AB1497911F0CA +:10E75000C00F27D00E3005F0CFFEA06890F8DD0086 +:10E7600018B1F5F7A6FE012824D0A068D0F8C4108F +:10E770004A7EC271D1F81A208260C98B81814561BD +:10E780000583A0680770D0F8C42090F80A1182F8B9 +:10E790005710D0F8C4000088F2F73CFABDE8F04109 +:10E7A000F1F7D2BED6F83711C0F80E10B6F83B110B +:10E7B0004182D2E7F5F7C0FEA16801F10802C91D48 +:10E7C000FDF71CF8002808BFFFDFA068C17941F001 +:10E7D0000201C171D6F80F114161B6F8131101831E +:10E7E000CFE72DE9F84FC04C0546FF21A068002770 +:10E7F0004FF0010980F8DE1090F8C800BA460128F1 +:10E8000018BF022802D0032818BFFFDF28004FF0EE +:10E81000040B4FF07F08B54EA6F1280500F04B81A0 +:10E820002846FEF73DFA28B92846FEF793FA002855 +:10E8300000F04181A06890F8E000082880F038815D +:10E84000DFE800F0FEFEFE04080CCF7BFFF7CEFBF6 +:10E8500000F0C5B800F093FD00F0C1B8A448FEF781 +:10E8600004F92071E878717A88421CD12879B17A4C +:10E87000884218D16879F17A884214D1A879317B1D +:10E88000884210D1E879717B88420CD1287AB17B1B +:10E89000884208D128783178C0F38010B0EBD11FBE +:10E8A00008BF012500D00025F6F7D2FA8E48F6F70A +:10E8B00034FC002808BF84F80080F6F719FC2079A2 +:10E8C000042840F04D81002D00F04A81CDF800A0D1 +:10E8D000A2688748694692F8D93053B3064692F841 +:10E8E0006600002840F03C8102F1680582F872B0B1 +:10E8F0006932A91C304600F016FC05F10B013046C8 +:10E90000FEF73DF9C0B228721F2884BF1F2028726D +:10E91000207809357F2808BFFFDF2078287084F829 +:10E920000080A06880F86690062002F019F800F0D8 +:10E9300017B9FEF747FD00F013B903276A48F6F749 +:10E94000ECFB002808BF84F80080F6F7D1FB68488C +:10E95000FEF78BF880466648FEF7F9F9B8F1080F24 +:10E9600008BF00283AD1E978032011F03F0F35D0D5 +:10E970002979884332D100215D48FEF739F9062212 +:10E9800006F1090105F0E8FB40BB5948FEF796F88F +:10E9900080465648FEF79FF880451FD10121544814 +:10E9A000FEF726F90622F11C05F0D6FBB0B9504857 +:10E9B000FEF791F880464D48FEF780F880450DD16E +:10E9C000F6F768FBF6F747FBF6F742FAF6F7ABFA0D +:10E9D0000227FFF78BFE042001F0C2FF38460746EE +:10E9E000B2E0F6F735FA4048F6F797FB002808BF83 +:10E9F00084F80080F6F77CFB3D48FEF736F80746C2 +:10EA00003B48FEF7A4F9072F08BF00284FD1E9784B +:10EA1000012011F03F0F4AD02979884347D10021C6 +:10EA20003348FEF7E5F8062206F1090105F094FBEC +:10EA300000283CD12E48FEF741F805462B4800E05F +:10EA400036E0FEF748F8854231D1A06890F804110D +:10EA500029B3B0F8082190F80611012A05D9520807 +:10EA6000A0F8082108BFA0F80891012914BF0029C7 +:10EA70000D21C943C1EBC10202EB011190F8052140 +:10EA8000D24302EB8203C3EB82121144B0F8082197 +:10EA9000890CB1FBF2F302FB131180F8051180F829 +:10EAA000049169461248CDF800A0FEF78BFC57E0B0 +:10EAB000FFDFBDE8F88FA06890F8E000082843D297 +:10EAC000DFE800F0424242041F2E3F350648F6F7C9 +:10EAD00024FB002808BF84F80080F6F709FBA06833 +:10EAE00090F8DD0050B105E0640100200012002024 +:10EAF000D8110020F6F7ECFAF5F7BBFCF6F7A8F909 +:10EB00002EE0FE48F6F709FB002808BF84F80080D5 +:10EB1000F6F7EEFAA06890F8DD000028EED0E2E704 +:10EB2000F648F6F7FAFA38B984F8008004E0F348BA +:10EB3000F6F7F3FA0028F7D0F6F7DAFAF6F788F9DD +:10EB40000EE000F02FFE0BE00C2F80F01982DFE8C2 +:10EB500007F006FDFC07FBFAFAFA0BF94FBBA8E732 +:10EB6000BDE8F84FFEF7A5BE00220121022001F00A +:10EB700051FD002800F04181E149A1F12800FDF795 +:10EB8000ADFFA068DE4E90F8B9103046FDF78DFF5E +:10EB9000A06800F1BA013046FDF76BFFA06890F85D +:10EBA000DB10C1B190F8C810032906D190F8C1104C +:10EBB000002918BF90F8CC0001D190F8DE00FCF7D6 +:10EBC0003FFF050007D001213046FDF76EFF2946C3 +:10EBD0003046FDF74EFFCA48F6F7B6F90121084660 +:10EBE000F6F7B3FAA168082081F8E000BDE8F88FD5 +:10EBF000A06890F8E21090F8E2100022032001F0E3 +:10EC000009FD00287ED0BF4F0A2087F8E0000120D0 +:10EC100001F0A6FE07F59A71A1F12800FDF75EFF4D +:10EC2000A06807F59A7890F8B9104046FDF73DFFC7 +:10EC3000A06800F1BA014046FDF71BFFA06890F8FC +:10EC4000DB10C9B190F8C810032906D190F8C110A3 +:10EC5000002918BF90F8CC0001D190F8DE00FCF735 +:10EC6000EFFE5FEA000907D001214046FDF71DFFD6 +:10EC700049464046FDF7FDFEA268A149D2F8C4000E +:10EC8000C08AC875000A0876D2F8C400407DB07505 +:10EC90000846F6F759F99A48D7F8C41020230278A5 +:10ECA000497B22F0200203EA411111430170D7F899 +:10ECB000C4002A78417BC2F340121140417397F897 +:10ECC0000B01D7F8C4106FE0A06890F8E21090F83C +:10ECD000E2100022052001F09DFC98B1894D0B2027 +:10ECE00085F8E000022001F03BFE05F59A71A1F1E4 +:10ECF0002800FDF7F3FEA06805F59A7790F8B910A3 +:10ED0000384600E079E0FDF7D0FEA06800F1BA01D6 +:10ED10003846FDF7AEFEA06890F8DB10F9B190F828 +:10ED2000C810032906D190F8C110002918BF90F827 +:10ED3000CC0001D190F8DE00FCF782FE5FEA00080B +:10ED40000DD004E034E01BE18EE085E07FE001219E +:10ED50003846FDF7AAFE41463846FDF78AFEA2680E +:10ED60006749D2F8C400C08AC875000A0876D2F88C +:10ED7000C400407DB0750846F6F7E6F8D5F8C40043 +:10ED800080F80D90A06890F8E230012296210020D2 +:10ED9000F5F790FF5A48017821F020010170A06832 +:10EDA000D5F8C41090F80B0181F85600BDE8F88F33 +:10EDB000A06890F8E21090F8E2100022042001F020 +:10EDC00029FCD0B14E49A1F12800FDF787FEA068CB +:10EDD0004B4E90F8B9103046FDF767FEA06800F181 +:10EDE000BA013046FDF745FEA06890F8DB10E9B1A6 +:10EDF00090F8C810032904D00AE0BDE8F84F00F0ED +:10EE0000CBB990F8C110002918BF90F8CC0001D1FF +:10EE100090F8DE00FCF714FE050007D00121304613 +:10EE2000FDF743FE29463046FDF723FE3448F6F74A +:10EE30008BF8A06890F8E230012296210020F5F7C7 +:10EE400039FFA168092081F8E000BDE8F88FA068CB +:10EE500080F8E090BDE8F88FA068022180F8049166 +:10EE600080F8E010BDE8F88FA56815F8E31F11F0F1 +:10EE7000800F0CBF1E204FF49670B5F80120C2F32E +:10EE80000C0212FB00F6C80908BF4FF01E0906D09D +:10EE9000002806BFFFDF4FF000094FF49679A878ED +:10EEA000400908BF012703D0012814BF002702270B +:10EEB000A06890F8E20001F0A4FBA6EB0008287817 +:10EEC00008EB0906C0F38010002808BF4FF4FA7A57 +:10EED00005D006BFFFDF4FF0000A4FF0320A0948A5 +:10EEE00090F8FC90B9F10C0F28BFFFDF0648074AE5 +:10EEF00030F819000AEB00010AE00000640100206C +:10EF000000120020CC100020DC4802003F420F001D +:10EF100001FB0620511CB0FBF1F000F120094E442A +:10EF2000F6F709F8287800F03F052846F5F732FD96 +:10EF3000A06880F8E15039462520F5F738FC012219 +:10EF4000A8EB09013B461046F5F7B4FEFE48F5F77D +:10EF5000FBFF00213046F6F743F8A06880F8E27026 +:10EF6000F6F7D0F8A06890F8DD0020B1F5F76DFA5B +:10EF70005020F6F79BF8A06880F8E0B0BDE8F88F65 +:10EF8000FFDFBDE8F88FF14810B5806890F8E00029 +:10EF90000C285FD2DFE800F05E5E5E5E5E5E5E5E65 +:10EFA0000613472DE848F5F7CFFFF6F7ABF8002139 +:10EFB0009620F6F715F8E5490520896830E0E24823 +:10EFC000F5F7C2FFE14CA06890F8E23001229621EB +:10EFD0001046F5F76FFEA06890F8E2000021962039 +:10EFE000F5F7FEFFF6F78EF8A168062081F8E0003D +:10EFF00010BDD548F5F7A8FFD44CA06890F8E230D2 +:10F00000012296211046F5F755FEA06890F8E2001F +:10F0100000219620F5F7E4FFF6F774F8A1680720C1 +:10F0200081F8E00010BDF6F735F8F6F714F8F5F7BB +:10F030000FFFF5F778FFC5480121806880F80411BB +:10F04000022180F8E010FFF751FBBDE810400320DB +:10F0500001F086BCFFDF10BD70B5BC4CA06890F815 +:10F06000E0007F25082828BF70BDDFE800F03F3FA3 +:10F070003F172304390AB548F6F74FF830B9257021 +:10F0800004E0B248F6F749F80028F8D0F6F730F86F +:10F09000F5F7DEFEBDE87040FEF70BBCAB48F6F7B7 +:10F0A0003CF8002808BF2570F6F722F8BDE870404C +:10F0B00000F072B8A548F6F730F8002808BF2570B0 +:10F0C000F6F716F8A06890F8DD0018B1F6F700F82A +:10F0D000F5F7CFF9F5F7BCFEBDE87040FEF7E9BBE8 +:10F0E00000F060FBBDE87040FEF7E3BB70BD70B59B +:10F0F000964C06460D46012909D0A06890F8E230EA +:10F1000090F8E2203046BDE8704001F0E9BDF5F727 +:10F1100011FBA16891F8E220034629463046BDE87C +:10F12000704001F0DDBD70B50646884814460D46B6 +:10F13000806890F8DD0018B1F5F7BBF901280ED012 +:10F140003046FDF7BBFC20703046FDF78EFC0728EB +:10F1500013D229463046BDE87040FDF791BCF5F763 +:10F16000EBF92A462146FCF749FB002808BFFFDFE0 +:10F17000207840F00200207070BD3046FDF775FC2D +:10F18000072818BF70BD00213046FDF731FD01682A +:10F1900029608088A88070BD10B5F5F77BFFF5F772 +:10F1A0005AFFF5F755FEF5F7BEFE684CA06890F8DB +:10F1B000DD0038B1F5F78CFFF5F75BF9A1680020A9 +:10F1C00081F8DD00A068012180F80411022180F897 +:10F1D000E010BDE81040002001F0C2BB2DE9F04175 +:10F1E000044680780222B2EB501F26D00D462178CB +:10F1F00011F0800F0CBF1E204FF49670B4F8012060 +:10F20000C2F30C0212FB00F6C80908BF1E2105D08C +:10F21000002806BFFFDF00214FF49671701BA27813 +:10F22000520908BF012703D0012A14BF0027022773 +:10F23000B0F5877F28BFAE4202D20020BDE8F08142 +:10F2400045182078C0F38010002808BF4FF4FA76E4 +:10F2500003D006BFFFDF002632263D4890F8FC4071 +:10F260000C2C28BFFFDF3B483B4A30F81400311814 +:10F2700001FB0520511CB0FBF1F020300544334860 +:10F28000806890F8E200F6F7B6F904463846F6F7DB +:10F29000B2F94FF47A7184423ABF001B00F2E730B2 +:10F2A000201AB0FBF1F034BF42192A1A3946BDE8E2 +:10F2B000F041012001F0AEB970B50D460446FDF7EE +:10F2C000AFFB032D55D0052D18BF70BD052120467D +:10F2D000FDF7ABFB1D4DA868D0F8C40000F10E018E +:10F2E0002046FDF760FCA868D0F8C40000F11201C8 +:10F2F0002046FDF75CFCA868D0F8C410497DA175D4 +:10F30000D0F8C410C98AE175090A2176D0F8C41072 +:10F3100049886176090AA176D0F8C4108988E17617 +:10F32000090A2177D0F8C410C9886177090AA17742 +:10F33000D0F8C40000F108012046FDF756FCA8688B +:10F34000D0F8C400017E09E0D8110020640100203B +:10F35000CC100020DC4802003F420F002046FDF7A1 +:10F360002CFCA86890F8FC102046BDE87040FDF722 +:10F370002EBC2046BDE870400321FDF756BB2DE9A9 +:10F38000F84FFD48F5F7C9FEFB4C002804BF7F206D +:10F390002070F5F7ADFEA06890F8D900002818BFDE +:10F3A000FFDFF648FDF761FBDFF8D083E0704FF038 +:10F3B000000998F803004D4610F03F0F1CBF98F865 +:10F3C000040010F0080F14D0EC48FDF7C0FC70B139 +:10F3D000012802D002280AD00BE098F8030010F0B0 +:10F3E0003F0F1CBF98F8040010F0010F01D04FF040 +:10F3F0000109A06890F8DD0018B1F5F769FEF5F78E +:10F4000038F898F803002E4637464FF0000A10F0FF +:10F410003F0F1CBF98F8040010F0020F43D0A06803 +:10F42000DFF858A3002690F8DB0000280CBF012766 +:10F4300000279AF800000121C5095046FDF7D8FBC6 +:10F4400035B1407900F0C000402808BF012500D048 +:10F450000025A06890F8C810032906D190F8C110C3 +:10F46000002918BF90F8CC0001D190F8DE00FCF71D +:10F47000B3F95FEA000B0FD01021FDF736F8002832 +:10F4800018BF012745B101215046FDF7B1FB0146E8 +:10F490005846F6F7D3F90646A068002D90F8B9A0B3 +:10F4A00018BF4AF0020AE0784FF0030B072875D125 +:10F4B000B248FDF74CFC002800F0F280012803D090 +:10F4C000022800F031819FE0009700270321AB481C +:10F4D000FDF78EFBB9F1000F7ED0A16891F8E7200F +:10F4E000012A79D1427891F8E9301209B2EB131F61 +:10F4F00072D10088B1F8E810C0F30B00C1F30B0122 +:10F50000884269D19D48FDF722FCA16891F8E62068 +:10F51000904261D191F8C800012818BF022802D09A +:10F5200003283CD0B9E0F5F793FC98F8030010F0FD +:10F530003F0F1CBF98F8040010F0020F17D08F4F38 +:10F540003846FDF7C8FA804601213846FDF750FBE2 +:10F550004146F5F7CDF9002818BF012030430BD004 +:10F560008DF800A069468548FDF72CFF14E00021C6 +:10F570008248FDF727FF0FE0A06890F8CA00032833 +:10F5800018BF022808D13DB136B97D486946806868 +:10F5900000907A48FDF716FF03277EE034E0002153 +:10F5A0007648FDF725FBA1680622D1F8C4101A3170 +:10F5B00004F0D2FD50B97148FDF780FAA168D1F886 +:10F5C000C410497E884208BF012500D0002598F864 +:10F5D000030010F03F0F00E05CE01CBF98F804004F +:10F5E00010F0020F01D0CEB127E0A06890F8CB1048 +:10F5F000012901D015B10CE05DB937E090F8DE10BB +:10F6000090F8CC00814204D0F5F722FC5846BDE8C2 +:10F61000F88FA06890F8E2000B273EE0009870B1E8 +:10F62000564E3046FDF757FA074601213046FDF7A2 +:10F63000DFFA3946F5F75CF908B1012200E0002253 +:10F64000A06890F8CB10012907D041B92DB990F8E6 +:10F65000DE3090F8CC00834201D1012000E0002090 +:10F66000024217D0012908BF002DD2D10021434802 +:10F67000FDF7BEFAA1680268D1F8C410C1F81A20DB +:10F680008088C8833D48FDF719FAA168D1F8C410F5 +:10F690004876BEE7F5F7DCFB03273846BDE8F88F70 +:10F6A000F5F7D6FB03213548FDF7A2FAB9F1000FB3 +:10F6B00036D0A16891F8E7206ABB427891F8E9302A +:10F6C0001209B2EB131F2BD10088B1F8E810C0F378 +:10F6D0000B00C1F30B01884222D12848FDF737FB0C +:10F6E000A16891F8E62090421AD191F8C80001284B +:10F6F00018BF022814D198F8030010F03F0F1CBF68 +:10F7000098F8040010F0020F06D08DF800A06946AA +:10F710001A48FDF757FE03E000211848FDF752FE96 +:10F720005846BDE8F88F00BFF5F792FBA06890F847 +:10F73000C80003281CD01148FDF709FBA16891F807 +:10F74000E620904214D198F80320092012F03F0FD0 +:10F750000ED098F8042090430AD1B9F1000F07D0D9 +:10F7600091F8C80002280DD000210448FDF72AFEB8 +:10F770000320BDE8F88F000064010020D8110020AC +:10F78000C848020091F8050128B1401E10F0FF00A2 +:10F7900081F80501ECD1524601212348FEF7E3F838 +:10F7A0000920E6E710B5F5F753FB2048F5F7B5FC5F +:10F7B0001E4C002804BF7F202070F5F799FCA0683C +:10F7C00090F8041119B1002180F8041110BDB0F8AF +:10F7D000082190F80611FF2A0AD24FF6FF7303EAB8 +:10F7E0004202A0F80821FF2A84BFFF22A0F80821C6 +:10F7F000012914BF00290D21C943C1EBC10202EB4D +:10F80000011290F80511C94301EB8103C3EB81118B +:10F810001144B0F80821890CB1FBF2F302FB13117B +:10F8200080F80511CFE70000D81100206401002006 +:10F830002DE9FF4F07460C46488881B040F2E2416F +:10F8400048430090E08A002600FB01FB94F8640026 +:10F8500091460D2818BF0C281FD024281EBF94F8ED +:10F86000650024284FF0000A17D0049818B1012130 +:10F87000204602F0B2FB94F8540094F8558094F8B6 +:10F88000D010054661B101296DD0022952D003295B +:10F8900018BFFFDF67D000F0D5B84FF0010AE4E7EA +:10F8A000B9F1000F08BFFFDFFD4EB068002808BFA8 +:10F8B000FFDF94F85410FB4890F82400FDF79DF802 +:10F8C000009094F85400F5F7A5FE00F2E7314FF4EC +:10F8D0007A79B1FBF9F1F24880680E1894F8540077 +:10F8E000F5F798FE014694F85400022804BFEE484C +:10F8F0004FF47A720DD0012804BFEC484FF4C8626F +:10F9000007D0042807BFEA4840F69802E94840F6C5 +:10F91000E4421044084400F2E731B1FBF9F10098E9 +:10F92000401A00EB0B01DE48406930440844061DD4 +:10F93000012015E0DA48A9F101018068084308BFF9 +:10F94000FFDFDD48B9F1000F006800EB0B0606D0C1 +:10F95000D348806800F22230B04288BFFFDF032026 +:10F9600084F8D0006DE094F86410009E24291EBF36 +:10F9700094F86520242A25294FD1B4F85810B4F8FA +:10F98000F020891A491C09B2002946DB94F8F210CC +:10F99000002942D00D4694F8F310002918BF88467C +:10F9A000022804BFC0494FF47A700DD0012804BF6B +:10F9B000BE494FF4C86007D0042807BFBC4940F6D1 +:10F9C0009800BC4940F6E4400144022D04BFB6480B +:10F9D0004FF47A720DD0012D04BFB4484FF4C862C1 +:10F9E00007D0042D07BFB24840F69802B14840F650 +:10F9F000E4421044814208D9081A00F5FA714FF424 +:10FA00007A70B1FBF0F0064407E0401A00F5FA7195 +:10FA10004FF47A70B1FBF0F0361AB9F1000F10D044 +:10FA2000DFF87C92D9F8080020B9B9F80200002864 +:10FA300018BFFFDFD9F8080000F22230B04288BFBB +:10FA4000FFDF06B9FFDF3146D4F8D400F2F7E9FD55 +:10FA5000C4F8D400B860002038704FF0010987F86E +:10FA60000490204602F0A6FBAAF10101084208BF5B +:10FA700087F8059006D094F8D00001280CBF02202A +:10FA8000032078714046D4F824B0F5F7B4FD014660 +:10FA9000022D04BF84484FF47A720DD0012D04BFAB +:10FAA00082484FF4C86207D0042D07BF804840F653 +:10FAB0009802804840F6E4421044084400F23F6156 +:10FAC0004FF47A70B1FBF0F0584400F5C970F8605B +:10FAD000049830EA0A0004BF05B0BDE8F08F314653 +:10FAE0003846FCF724FE85B2204602F063FBA842AC +:10FAF0000FD8054687F8059006FB05F1D4F8D40029 +:10FB0000F2F78FFDB86031463846FCF710FE284406 +:10FB100085B22946204602F060FAB868C4F8D400DD +:10FB200005B0BDE8F08F2DE9F0430446634885B089 +:10FB30000D4690F80004DFF88891400999F8001408 +:10FB40004909884218BFFFDFDFF85481002708F118 +:10FB50004406082D80F00E81DFE805F0046872721B +:10FB60006DFEFEB6202C28BFFFDF36F814000621FC +:10FB7000F0F71EFF050008BFFFDF202C28BFFFDFC6 +:10FB800036F814002988884218BFFFDF95F8D000A6 +:10FB9000002808BFFFDF284601F02EFFC8F80870D4 +:10FBA000A8F8027029460020C8F81470FCF710FE6F +:10FBB00000F19804686AA04225D995F85500F5F738 +:10FBC0001AFD014695F85400022804BF36484FF448 +:10FBD0007A720DD0012804BF34484FF4C86207D0B0 +:10FBE000042807BF324840F69802324840F6E44203 +:10FBF000104408444FF47A7100F23F60B0FBF1F119 +:10FC0000686A0844071B29460020C8F80C70FCF7F6 +:10FC1000DFFD698840F2E24251439830081AA0F2B1 +:10FC20002230C8F8100005B0BDE8F08305B0BDE88B +:10FC3000F04302F0ADB805B0BDE8F043F5F7A9BA5E +:10FC400099F8140D1F49400991F800144909884298 +:10FC500018BFFFDF202C28BFFFDF36F81400062175 +:10FC6000F0F7A6FE050008BFFFDF202C28BFFFDF4E +:10FC700036F814002988884218BFFFDF00220123CC +:10FC800029466846FFF7D4FD95F8DA006946F3F790 +:10FC900007FA002808BFFFDF05B0BDE8F0830000C9 +:10FCA000281200204412002068360200A22402001C +:10FCB000D0FB010030D301007401002001E000E01E +:10FCC0000BE000E019E000E0202C28BFFFDF36F851 +:10FCD00014000621F0F76CFE050008BFFFDF202CA2 +:10FCE00028BFFFDF36F814002988884218BFFFDFDD +:10FCF00095F8D000042818BFFFDF85F8D07095F87C +:10FD0000DA404FF6FF79202C28BFFFDF26F8149049 +:10FD100095F8DA00F2F75DFF002808BFFFDF20202A +:10FD200085F8DA00D5F8E000002804BFD5F8DC003B +:10FD3000C8F8180008D0D5E9391211448269114475 +:10FD40008161D5E93701C860D5F8DC0000281CBF07 +:10FD5000D5F8E010016100E00CE004D1D5F8E00036 +:10FD6000002818BF8761FE48007805B0BDE8F04361 +:10FD7000ECF70CB8FFDF05B0BDE8F0832DE9F05FCC +:10FD8000F84E07468B46F08B7568401CF083307840 +:10FD90004FF00008002808BFFFDF07D0DFF8C89346 +:10FDA00004282ED0052818BFFFDF5BD05846FEF789 +:10FDB00018F9040008BFFFDF29463069F2F731FC6B +:10FDC000B86087F800800120387194F8C9000228D3 +:10FDD00008BFE64807D0012808BFE54803D004283B +:10FDE0000CBFE448E4484FF47A7100F2E140B0FB04 +:10FDF000F1F0B168FA300844F860307804287DD119 +:10FE000083E0002AD2D0D6F810A0D9F8184034B335 +:10FE1000A146E468002CFBD1B9F1000F1FD099F87E +:10FE20000000002808BFFFDFD9F81410D9F804003B +:10FE300001445046F3F7FAFB002807DA291A491E55 +:10FE400091FBF5F101FB05042A4604E090FBF5F176 +:10FE500001FB15042A46944288BFFFDF00E04446B8 +:10FE60002546A3E7002AA1D0B569002D08BFFFDF12 +:10FE70000024D5F8E420D9F818002346611E58B1B3 +:10FE80008369934228BF994284BF194604460346BA +:10FE9000C0680028F4D104B91C46C5F8E040D0354C +:10FEA000002C04BFC5F80C80C9F8185005D0E068D4 +:10FEB000E560E860002818BF0561D5F81090C5F826 +:10FEC0001880B9F1000F0ED0D9F8180048B1D5F854 +:10FED00014A0504538BFFFDFD9F81800A0EB0A0086 +:10FEE000A861C9F81880002C08BFC6F8208009D086 +:10FEF0002078002808BFFFDF616900E00AE0606841 +:10FF00000844306240F6B83550E7F08B0A2838BF15 +:10FF1000032000D302207871F08B012807D93846DE +:10FF20007168FCF704FC0146F08B0844F083B86864 +:10FF30003061BDE8F09F2DE9F04107468F4884B05D +:10FF40000D4690F80004DFF83882400998F8001454 +:10FF50004909884218BFFFDF01200026082D814C87 +:10FF600080F0BB80DFE805F004718C8C87B9B9A5FF +:10FF700060732073607800281CBF04B0BDE8F08176 +:10FF800079488660466126733846FEF72AF80500F0 +:10FF900008BFFFDF95F8C900022804BF79494FF474 +:10FFA0007A720DD0012804BF71494FF4C86207D09E +:10FFB000042807BF6F4940F69802734940F6E442AF +:10FFC00011444FF47A7201F2E731B1FBF2F1A26809 +:10FFD0008C18F5F704FB024695F8C900082808BFFD +:10FFE000082127D004280CBF0221002322D0022898 +:10FFF0000CBF182128211944042816BF08280F23F4 +:020000040002F8 +:1000000025235B1D082808BF402007D0042808BF0F +:10001000102003D002280CBF0420082013FB00107E +:10002000801A201AFDF76DFD002818BFFFDF04B00D +:10003000BDE8F08101EB410101F12803082814BF5C +:1000400004284FF4A871D6D0D1E7617851B1207B54 +:10005000002808BFFDF77AFF667304B0BDE8F041E1 +:10006000F2F7E2BCA073FDF70EFE002818BFFFDF19 +:1000700004B0BDE8F08104B0BDE8F041F5F789B8FF +:1000800098F8140D4149400991F800144909884233 +:1000900018BFFFDF002239466846FFF76FFE69464A +:1000A0003846F2F7FDFF002808BFFFDF04B0BDE8C7 +:1000B000F0812078052818BFFFDF207F002808BFC7 +:1000C000FFDF26772670207DF2F783FD002808BF2A +:1000D000FFDF267504B0BDE8F081FFDF04B0BDE8A6 +:1000E000F0812DE9F0411F4C0026207804281FBF25 +:1000F000207805280C20BDE8F08101206070607B2D +:100100000025A8B1EFF3108010F0010F72B60CBFFC +:1001100000270127607B00281CBFA07B002805D09A +:10012000FDF714FF6573A573F2F77EFC2FB903E0AA +:10013000207DF3F7C7F800E062B6207DF3F70FFBF0 +:10014000207F28B125772078052818BFFFDF0C26EF +:1001500065702570207DF2F73CFD002818E0000056 +:1001600070010020441200202812002004360200F2 +:10017000A2240200D0FB0100C0D4010001E000E095 +:100180000BE000E06836020030D3010019E000E027 +:1001900008BFFFDF25753046BDE8F0812DE9F04F3F +:1001A000FD4883B00078002818BFFFF79AFF0120B0 +:1001B000DFF8E88388F8000069460620F0F781FB45 +:1001C000002818BFFFDF00274FF6FF7934E00298C0 +:1001D00000281CBF90F8D01000292DD00088484579 +:1001E0001CBFDFF8BCA34FF0200B3BD00621F0F77B +:1001F000DFFB040008BFFFDF94F8DA00F3F7AFFA83 +:1002000084F8D07094F8DA504FF6FF76202D28BF8E +:10021000FFDF2AF8156094F8DA00F2F7DAFC00281C +:1002200008BFFFDF84F8DAB069460620F0F749FB23 +:10023000002818BFFFDF10E06846F0F720FB002819 +:10024000C5D00FE0029800281CBF90F8D0100029FC +:1002500003D000884845C9D104E06846F0F70FFB99 +:100260000028EFD088F80070C8F8187003B000209C +:10027000BDE8F08F10B5CB4C60B101280CBF40F643 +:10028000C410FFDF06D0A06841F66A01884228BF8B +:10029000FFDF10BDA060F6E710B5DFF808C3BE4C65 +:1002A00000238CF80000237063702377237363733B +:1002B000A3732020A3612075A4F11C004370423079 +:1002C00010214FF6FF72428020F8042F491EFAD108 +:1002D000CCF80830DCF8080041F66A01884228BFF3 +:1002E000FFDFFFF75BFF40F6C41101206160F5F707 +:1002F00082F900F2E7314FF47A70B1FBF0F042F28C +:1003000010710844A0606168A1F21731884298BF5B +:100310000146A16010BDF0B59F4C054685B0207820 +:1003200000281EBF0C2005B0F0BD95F8546095F86C +:1003300055006F6AF5F75FF9022E04BF9A494FF432 +:100340007A720DD0012E04BF98494FF4C86207D0CD +:10035000042E07BF964940F69802964940F6E442BB +:10036000114408444FF47A7100F23F60B0FBF1F0A1 +:10037000384400F22230C5F8E400A56195F8D000B9 +:10038000002818BFFFDF0020844948610521217043 +:1003900060702077E0838848F2F7C1FB2075202841 +:1003A00008BFFFDFF2F734FC2061217D012268469F +:1003B000FFF7E4FC207D6946F2F772FE002808BFD3 +:1003C000FFDF002005B0F0BD7348007800281CBF97 +:1003D0000020704710B50620F0F784FA80F0010085 +:1003E00010BD70B56C4C05462078002818BFFFDFA3 +:1003F000287801281CBF112070BD698840F2712245 +:10040000AD88514301206160F5F7F5F800F2E7315E +:100410004FF47A70B1FBF0F040F2712105FB01005E +:10042000A0606168A1F21731884298BF01460020A0 +:10043000A16070BD10B584B008431EBF112004B088 +:1004400010BD554C207800281EBF0C2004B010BDF4 +:100450000020607004212170E0835748F2F75FFBB1 +:100460002075202808BFFFDF4C48806938B101465D +:10047000C0680028FBD111B1F2F7CAFB05E0F2F722 +:10048000C7FB40F6B831F2F7CCF82061217D01229C +:100490006846FFF773FC207D6946F2F701FE0028ED +:1004A00008BFFFDF002004B010BD70B53A4CA16951 +:1004B0000160FFF716FE002300BBA169D1F8E02020 +:1004C0005AB1D1E939C5AC449569AC44C2F818C0F9 +:1004D000D1E9372CCCF80C2005E0DFF8C0C0D1F80A +:1004E000DC20CCF81820D1F8DC20D1F8E010002A6C +:1004F00018BF116102D1002918BF8B61A36170BDC3 +:1005000026494870704770B540F2E24300FB03F59E +:1005100010460C46F5F76FF8022C04BF22494FF441 +:100520007A720DD0012C04BF20494FF4C86207D065 +:10053000042C07BF1E4940F698021E4940F6E442CB +:10054000114408444FF47A7100F23F60B0FBF1F0BF +:1005500000F2223085428CBF281A002070BD70B591 +:100560000D46064601460020FCF732F9044696F88F +:100570005500F5F740F8014696F85400022804BFEC +:10058000094A4FF47A7020D0012804BF074A4FF47B +:10059000C8601AD0042811E044120020281200205C +:1005A0006C1200207001002068360200A2240200B4 +:1005B000D0FB010030D3010037FF010007BFFC4A28 +:1005C00040F69800FB4A40F6E440104408444FF4DB +:1005D0007A7100F23F60B0FBF1F0718840F2712255 +:1005E0005143C0EB4100A0F22230A54234BF214666 +:1005F0002946814203D2A5422CBF2846204670627C +:1006000070BD10B5F4F7EBFFEB498A684968511AE1 +:10061000084410BD2DE9F74FE74A00231826D2F809 +:1006200008B028270BF198044FF004084FF0100988 +:100630004FF0080A4FF4C8724FF4BF754FF0400CEA +:1006400006287CD2DFE800F0034A21472465142005 +:10065000042912D0082909D02A20022911D010FB20 +:100660000A40002328211944441877E010FB0C406D +:100670004FEA0C034FF4A871F5E710FB09402E2355 +:10068000F8E710FB08401821EDE704F5317465E048 +:10069000082904BF4FF4BA6140200CD0042915D0BA +:1006A000022903BF03F15C01324604203A461CBF15 +:1006B00003F1B001082000EBC00000EB400002EBAA +:1006C00040000844204400F19C0447E02A4640F2E0 +:1006D0008E211020EFE704F5B0743FE0082908BF31 +:1006E00040200CD0042904BF2A46102007D002293C +:1006F00007BF03F11802042003F128020820C0EB11 +:10070000C00000EB400002EB4001029858440C1876 +:1007100024E0082904BF4FF4356140200CD004299F +:1007200016D0022903BF324603F1B401042003F5B9 +:10073000B0711CBF3A46082000EB400300E00CE01B +:1007400003EB001010440844204400F19C0405E031 +:100750002A4640F2EE311020EEE7FFDF974880682E +:10076000A0428CBF0120002003B0BDE8F08F10B57F +:10077000914C607828B1D4E90301A268FCF707F82E +:10078000E060D4E9020188429CBF2078002814BFB1 +:100790000020012010BD04222DE9F04F884E894F22 +:1007A000DFF80C82DFF80C9285B04FF47A7A0529D5 +:1007B00080F0D280DFE801F00A2B0331920080F84C +:1007C000D02005B0BDE8F04FF2F72EB904467A48C4 +:1007D0000078002818BF84F8D02004D005B0BDE808 +:1007E000F04FF2F721B90122002321466846FFF7B6 +:1007F0001FF894F8DA006946F2F752FC002808BFA7 +:10080000FFDFB4F85800401CA4F85800E6E70321C5 +:1008100080F8D01005B0BDE8F08F8346408840F2E4 +:10082000E241484368490860DBF8F800594600890E +:10083000ABF81600DBF8F80080798BF81500DBF8D0 +:10084000F8004089ABF80200DBF8F8008089ABF8CB +:100850000400DBF8F800C089ABF806000020DBF8E4 +:100860002850FBF7B5FF04469BF85500F4F7C3FE8C +:100870009BF85410022908BF4FF47A710DD001295A +:1008800004BF3E464FF4C86107D0042907BF46465F +:1008900040F698014E4640F6E4413144084400F2E7 +:1008A0003F60B0FBFAF1BBF8020040F27122504306 +:1008B000C1EB4000A0F22230A54234BF21462946B8 +:1008C000814203D2A5422CBF28462046CBF8240003 +:1008D00002208BF8D00005B0BDE8F08F83460146BA +:1008E000856A0020FBF774FF04469BF85500F4F777 +:1008F00082FE9BF85410022908BF4FF47A710DD084 +:10090000012904BF3E464FF4C86107D0042907BF40 +:10091000464640F698014E4640F6E44131440844CC +:1009200000F23F60B0FBFAF0BBF8021040F2712217 +:100930005143C0EB4100A0F22230A54234BF214612 +:100940002946814203D2A5422CBF28462046CBF837 +:10095000240005B0BDE8F08FFFDF05B0BDE8F08FE3 +:100960002DE9F043DFF864800024144D98F800105E +:1009700085B0072880F0AD81DFE800F0042A2AFC6A +:10098000FCFBFB00EC830846EBF700FA68780028D4 +:1009900040F05E81297D00226846FFF7EFF9287D4F +:1009A0006946F2F77DFB002808BFFFDF00F050B971 +:1009B000D0FB010030D30100281200204412002097 +:1009C00068360200A2240200740100207001002099 +:1009D00002280CBF01260026287DFDF702FB04003B +:1009E00008BFFFDF94F8E2103046FCF706F8DFF8A6 +:1009F000449301462869D9F80820002E024408BF14 +:100A00004FF4FC706ED094F8E20094F8E2000828ED +:100A10001EBF94F8E2000428002000F0B98000BF57 +:100A200094F8E230082B1ABF94F8E230042B4FF40C +:100A3000A87305D094F8E230022B0CBF18232823AA +:100A4000034494F8E200082808BF40200BD094F833 +:100A5000E200042808BF102005D094F8E200022824 +:100A60000CBF04200820C0EBC00C0CEB401003446A +:100A700094F8E20008281EBF94F8E2000428002041 +:100A800079D000BF94F8E2C0BCF1080F1ABF94F807 +:100A9000E2C0BCF1040F4FF4A87C08D094F8E2C087 +:100AA000BCF1020F0CBF4FF0180C4FF0280C84441F +:100AB00094F8E200082808BF40200BD094F8E20028 +:100AC000042808BF102005D094F8E20002280CBFCB +:100AD0000420082000EB400606EB00106044184498 +:100AE00000F59A7010440844061D94F8E200F4F7EB +:100AF00082FD94F8E210022908BF8F490BD094F8C8 +:100B0000E210012908BF8D4905D094F8E2100429AC +:100B10000CBF8B498B4994F8E220022A08BF4FF49E +:100B20007A720ED094F8E220012A08BF4FF4C8620E +:100B300007D094F8E220042A0CBF40F6980240F651 +:100B4000E442114408444FF47A7100F2E730B0FBFC +:100B5000F1F0A969301A40F2E2434A88D03102FB31 +:100B600003F6D9F818208A4208BF00272AD0296A3C +:100B700002E0A8E055E014E0F2F758FD002819DA89 +:100B8000311A4A1E92FBF6F202FB0607314616E0C6 +:100B900094F8E200082818BF022000EB400028303B +:100BA0003EE794F8E200082818BF022000EB40005E +:100BB000283067E790FBF6F202FB160731468F42BA +:100BC00088BFFFDFD8F80800874208D2A86940F242 +:100BD00071224188C1824A4307EB420705E040F297 +:100BE000E240B7FBF0F0A969C88294F8E210A86966 +:100BF00080F8541094F8E21080F8551005214175E2 +:100C0000C08A6FF41C71484307EB400040F6354141 +:100C1000C9F81400B0EB410F28BFFFDF05B0BDE8F5 +:100C2000F08304280CBF01260026EC830846EBF76E +:100C3000ADF80120287785F82460A8692969C0F8F3 +:100C4000D41080F8D0402978052918BFFFDF06D0DE +:100C5000F1F7EAFE6C73AC7305B0BDE8F0830028D1 +:100C600008BFFFDFA86990F8D000002818BFFFDF99 +:100C7000A86990F8DA00202818BFFFDF3248F1F7A2 +:100C80004EFFA9690646202881F8DA000F8828BFA0 +:100C9000FFDF2E4820F81670A86990F8DA002028A7 +:100CA00008BFFFDF002301226846A969FEF7C0FDE7 +:100CB000A869694690F8DA00F2F7F2F9002808BF4F +:100CC000FFDFAC61C4E705B00846BDE8F043EBF7D1 +:100CD0005DB8FFDF05B0BDE8F08316494860704796 +:100CE00070B5144D0446002904BFA86070BD4FF4D0 +:100CF0007A76012910D002291CBFFFDF70BD6888F9 +:100D0000401C68801046F4F785FC00F2E730B0FB29 +:100D1000F6F0201AA86070BD1846F4F78AFC00F2BD +:100D2000E730B0FBF6F0201AA86070BD08480078E4 +:100D3000704700002812002068360200A22402003A +:100D4000D0FB010030D3010027FB01006C12002012 +:100D500044120020F7490C28896881F8CB001ABF9B +:100D6000132818287047002211280FD0072808BF21 +:100D7000704715280AD001281ABF0028022870479A +:100D8000A1F88420012081F888007047A1F88A200A +:100D9000704770B5E74CA1680A88A1F83E2181F838 +:100DA0003C0191F85400012808BF012503D0022816 +:100DB00014BFFFDF0225A06880F8405190F855006D +:100DC000012808BF012503D0022814BFFFDF022538 +:100DD000A068012180F8415180F83A11002180F883 +:100DE0000E11E078BDE87040EAF7D0BFD14A012982 +:100DF00092681BD0002302290FD0032922D030B3E0 +:100E000001282FD0032818BF704792F864001328D8 +:100E10001CBF1628182805D1704792F8CB0000286F +:100E200008BF7047D2F8F8000370704792F8CB0003 +:100E3000012808BF704700BFD2F8FC000178491EA6 +:100E40000170704792F8CB000328EBD17047D2F8BD +:100E5000F800B2F858108288891A09B20029A8BF90 +:100E600003707047B2F85800B2F80211401A00B28D +:100E70000028E1DA70472DE9F041AE4C0026032747 +:100E8000D4F808C0012590B12069C0788CF8CA0058 +:100E900005FA00F010F4000F08BFFFDFA06880F82B +:100EA0006470A0F8846080F88850BDE8F081002369 +:100EB0009CF8652019460CF15800FBF7CEFB002882 +:100EC00004BF6570BDE8F0816078002818BFBDE8F8 +:100ED000F0812069C178A06880F8C91080F8657039 +:100EE000A0F88A6080F88C50BDE8F08170B5914C14 +:100EF00084B0207910F0010F04BF04B070BD2069E8 +:100F000000230521C578A06890F864205830FBF7CD +:100F1000A4FB002818BF062D09D020DC022D1CBF21 +:100F2000042D052D03D0607840F0080060706078D3 +:100F300000281CBF04B070BD2069C078801E162830 +:100F400080F00783DFE800F011FF89A7D52CFFFEB2 +:100F5000FF7FFDD2FFFFFFC5FCFBFAF9F8F50B2D73 +:100F60001CBF0D2D112DDED1E1E7A068002301216A +:100F700090F867205830FBF770FB002840F05C8346 +:100F80002069FCF759F8A16881F8F600072081F87C +:100F90006700002081F88C0081F8880000F04CBBCD +:100FA000A0680921002390F864205830FBF755FB16 +:100FB00018B120690079122812D0A0680A210023F4 +:100FC00090F864205830FBF748FB18B1206900798D +:100FD000142820D020690079162840F02D8324E0C1 +:100FE000A0680125002390F8642009215830FBF700 +:100FF00034FB002808BF657000F01E83607800286D +:1010000040F01A83A16881F87C0081F8880081F89B +:10101000640000F011BBA168002081F86400A1F811 +:10102000840081F8880000F035BAA06890F8641058 +:101030001F2940F00183002180F8641080F8881097 +:101040001A2000F0F7BAA06890F864100F2927D191 +:10105000002180F86910122137E0A06890F8641030 +:1010600013291DD1D0F8F81000884988814218BF93 +:10107000FFDFA068D0F8F80000F126012069FCF736 +:1010800008F8A06800F1C4012069FCF70AF81620EE +:10109000A16800F05BB9A26892F86400162802D03B +:1010A000022000F03BBAD2F8F80002F1B00300F1E0 +:1010B0001E0100220E30FBF74CFAA0680021C0E9A7 +:1010C0002811012180F86910182180F8641000F0BF +:1010D000B3BA2069FCF765F8032840F0AD822069B7 +:1010E000FCF763F801F0D0FB00F0A6BA20690079A4 +:1010F000F8E7A06890F864101A29D1D1002580F88B +:101100008D5080F88850D0F8F810008849888142C6 +:1011100018BFFFDFA068D0F8F8100D70D0F84411A8 +:101120000A78002A18BFFFDF7ED190F88E20DAB14E +:101130000AE03CE27C010020B6E181E125E1F1E03A +:1011400008E12BE09EE0A9E180F88E500288CA8079 +:10115000D0F844110D71D0F844210E211170D0F84F +:1011600044210188518010E00288CA80D0F84411DF +:101170000D71D0F8442101211172D0F844210D21C4 +:101180001170D0F84421018851800088EFF742FDAA +:10119000EFF7DAF9E078EAF7F9FDBEE0A06800239E +:1011A000194690F865205830FBF757FA50B9A068F7 +:1011B0000023082190F864205830FBF74EFA0028ED +:1011C00000F0FA816078002840F03682A06890F83C +:1011D000900010F0020F14D12069FBF765FFA168A1 +:1011E00081F891002069B0F80520A1F89220B0F8AC +:1011F0000700A1F8940091F8900040F0020081F8F7 +:101200009000A06890F8901011F0010F14D190F8A0 +:101210006520002319465830FBF71FFA002808BF45 +:10122000FFDF0121A06800E077E080F8651080F81A +:101230008C100021A0F88A10A06890F86410012991 +:1012400007D1002180F8641080F88810E078EAF770 +:101250009DFDA168D1F8F800098842888A4204BF40 +:101260000178042940F0E88100250570E078EAF76C +:101270008DFDA06890F86410002908BF80F88850A0 +:1012800000F0DAB9A0680023072190F864205830F4 +:10129000FBF7E3F9002800F08F816078002840F028 +:1012A000CB8102A92069FBF739FF9DF808000025D2 +:1012B00000F02501A06880F896109DF8091001F053 +:1012C000410180F8971080F88850D0F8F810008815 +:1012D0004988814218BFFFDFA068D0F8F8100D7070 +:1012E000D0F844110A78002A18BFFFDF15D1028810 +:1012F000CA80D0F844110D71D0F84411029A8A6066 +:10130000039ACA60D0F84421082111700188D0F8EE +:1013100044014180E078EAF739FDA06880F8645024 +:1013200000F08AB9A0680023092190F864205830A1 +:10133000FBF793F9002800F03F816078002840F027 +:101340007B81A16881F87C0081F8880081F86400C5 +:1013500000F072B9A0680023194690F86520583053 +:10136000FBF77BF9002800F027816078002840F027 +:101370006381A0680021A0F88A10012180F88C10F8 +:10138000022180F8651000F057B9A06800231946C3 +:1013900090F865205830FBF760F900287FD020696D +:1013A000FBF7A6FE002879D0A5682069FBF79CFE14 +:1013B0002887A5682069FBF793FE6887A5682069E0 +:1013C000FBF794FEA887A5682069FBF78BFEE887EA +:1013D000A06890F864101C2913BF90F84E100121EA +:1013E00080F84E10012907D090F80511002904BF9C +:1013F00090F80411002903D01E2180F8651017E031 +:101400001D2180F865100288A0F82A21028FA0F81B +:101410002C21428FA0F82E21828F00F58A71A0F82E +:101420003021C08FC88301200875E078EAF7AEFC50 +:10143000A0680021A0F88A10012180F88C10FBE040 +:10144000A06800230A2190F864205830FBF705F9C2 +:1014500018B32069FBF74CFEA8B1A5682069FBF71B +:1014600043FE2887A5682069FBF73AFE6887A568D0 +:101470002069FBF73BFEA887A5682069FBF732FED1 +:10148000E88700F0FEFEA168002081F8880081F85E +:10149000640000BF00F0C6FECEE000E059E06078D6 +:1014A00040F001006070C7E0A0680023194690F882 +:1014B00065205830FBF7D1F878B3A06890F8640045 +:1014C000232812BF2428607840F0200026D06846E8 +:1014D000F4F747F9002808BF002104D0009802A9BA +:1014E000C0788DF80800A06801AB162290F864005F +:1014F000FBF767FAA0B1A0689DF80420162180F8D8 +:10150000EC2080F8ED10192180F86510012180F899 +:101510008C100021A0F88A108EE04DE060708BE006 +:101520002069FBF700FEA0B12269107900F00701E5 +:10153000A06880F85010527902F0070280F851201C +:1015400090F80F31002B04BF90F80E31002B04D01F +:1015500022E00020FFF78FFC6EE090F855C000F10C +:1015600054038C4501BF19789142012180F87D1008 +:1015700012D00288A0F8362190F8502000F58A7128 +:1015800080F8382190F8510081F82500012081F879 +:101590002000E078EAF7FAFBA068212180F86510C6 +:1015A000012180F88C100021A0F88A1044E0A06886 +:1015B00090F864001F2801D00120AFE72069FBF7F5 +:1015C000BCFD88B32069A2680179407901F0070168 +:1015D00061F30705294600F0070060F30F210120A1 +:1015E00082F888000025A2F88450232082F8640045 +:1015F000566DD2F81001FBF79CF9F2B2C1B28A42E3 +:1016000007BFA16881F8F250A26882F8F210C6F311 +:101610000721C0F30720814219BFA16881F8F300B8 +:10162000A06880F8F35007E0FFE70120FFF723FCF4 +:101630005FF01E00FFF7ADFBA068D0E92A12491C3D +:1016400042F10002C0E92A1204B070BD2DE9F04752 +:10165000FE4D04464FF0000768780843687028790B +:1016600010F0200F2846806818BFA0F87E7004D1C3 +:10167000B0F87E10491CA0F87E1090F86A10012680 +:1016800039B990F86420002306215830FAF7E5FFB5 +:1016900058B3A88810F4006F07D0A86890F86A10B3 +:1016A000002918BFA0F876701FD1A868B0F876108E +:1016B000491C89B2A0F87610B0F878208A422CBF75 +:1016C000511A00218288521D8A4228BF80F87C600E +:1016D000B0F87610B0F87820914206D3A0F8767072 +:1016E00080F81A61E878EAF751FB287910F0600F6A +:1016F00008D0A86890F8681021B980F868600121C6 +:10170000FFF749F84FF00808002C56D168780028F8 +:1017100051D1287910F0040F0DD0A86890F864001A +:10172000032808BFFFDFA86890F86710072904BFE7 +:101730002E7080F8677001F0F7F8287910F0080F24 +:1017400019D06878B8B9A868002190F8CB00FFF7E5 +:101750004DFBA86890F8CB00FE2808BFFFDFFE21F4 +:10176000A86880F8CB1090F86710082903D10221EF +:10177000297080F86770FFF7B9FBA87810F0080FA0 +:1017800016D0A8680023052190F864205830FAF795 +:1017900064FF50B185F80180A868D0F8441108783A +:1017A0000D2808BF0020087002E00020F9F770FB48 +:1017B000A86800F0F2FF00F0AEFDA868A14600F1B5 +:1017C000580490F8F40030B9E27B00230121204650 +:1017D000FAF743FF10B1608D401C60853D21B9F1DF +:1017E000000F18D12878022808BF16200ED0012833 +:1017F00004BFA86890F8F60008D06878E8B110F047 +:10180000140F1CBF1E20207702D005E0207703E0D4 +:1018100010F0080F02D02177E67641E010F0030FB8 +:1018200003D02A202077E6763AE010F0200F08BF98 +:10183000FFDF23202077E67632E094F8300028B1ED +:10184000A08D411CA185E18D884213D294F834000B +:1018500028B1608E411C6186E18D88420AD2618D7B +:10186000208D814203D3AA6892F8F42012B9E28D48 +:10187000914203D322202077E67611E0217C31B11A +:10188000E18C814228BF84F81C80C5D206E0E08C40 +:10189000062803D33E202077E67601E0E07EA0B163 +:1018A0002773677327740221A868FEF774FFA8687E +:1018B00090F8CB10012904D1D0F8FC000178491E22 +:1018C0000170E878EAF762FA03E00021A868FEF701 +:1018D00062FFBDE8F047F3F753BF5C4A5178937855 +:1018E000194314D111460128896809D0107910F0E4 +:1018F000040F03D091F86700072808D00120704733 +:10190000B1F84800098E884201D8FEF730BF0020A8 +:10191000704770B54D4C06460D46A0883043A080F8 +:1019200016F0020F04D016F0010F18BFFFDFE560BC +:1019300016F0010F18BF256116F0020F10D0E878DD +:10194000062802D00B2837D00AE0A06890F864106F +:10195000182905D10021C0E92A11012180F86A1057 +:1019600016F0800F1CBF0820A07016F4806F08BF0F +:1019700070BDA268B2F8580091880844801DE978CB +:1019800080B2012908BFA2F8020107D0002904BFD4 +:10199000D2F8F810888001D0182915D0E9782846A7 +:1019A00001291CD009B3182918BF70BDB2F8F01076 +:1019B000BDE87040FBF7D3BBA06890F86410122913 +:1019C00008BF0021CCD1C9E792F8F210002902BF6C +:1019D00092F8F31000290020A2F8F000DEE7B2F838 +:1019E00002114172090AA97270BDD2F8F8108988F3 +:1019F0004173090AA97370BDF0B5144C85B0002677 +:101A0000A060A6806670A670054626700088F3F771 +:101A10007FFEA0680088F3F7A1FEB5F8D800A168A2 +:101A2000401C82B201F15800FAF718FC002818BFD8 +:101A3000FFDF95F8650024280ED1B5F85810B5F8E9 +:101A4000F000081A00B2002802E000007C0100202B +:101A5000A4BF6078002806D095F86400242818BF39 +:101A600025283BD119E0A06890F8F210002908BFA2 +:101A700090F8541080F8541090F8F310002908BF23 +:101A800090F8551080F855100020FFF782F985F87E +:101A90006560A16881F87D6020E0B5F85810B5F860 +:101AA000F000081A00B20028A4BF6078002815D101 +:101AB000A06890F8F210002908BF90F8541080F840 +:101AC000541090F8F310002908BF90F8551080F8D2 +:101AD00055100020FFF75DF985F86460A5F8D8601F +:101AE000A06890F8881039B1B0F88410B0F886205A +:101AF000914224BF05B0F0BD90F88C1039B1B0F818 +:101B00008A10B0F88620914224BF05B0F0BDB0F82D +:101B10008220B0F880108A4224BF05B0F0BD90F852 +:101B200068208AB3B0F87E208A4224BF05B0F0BD99 +:101B300090F8CB70FE2F00F012816846F3F7EBFDB2 +:101B4000002808BFFFDF2221009802F0B0FB03212C +:101B50000098FBF7EDF90098017821F01001017071 +:101B60003946FBF713FA192F71D2DFE807F0271F68 +:101B70001445D6D6D71971D6D7D763D6D6D6D6C9F7 +:101B8000D7D77B94ADD6B600B0F87E10062924BF17 +:101B900005B0F0BDCCE7A168009891F8F51003E01E +:101BA000A168009891F8CC100171B7E0A068D0F856 +:101BB000FC00411C0098FBF734FAAFE0A1680098E4 +:101BC000D1F8F82092790271D1F8F8201289427187 +:101BD000120A8271D1F8F8205289C271120A027277 +:101BE000D1F8F82092894272120A8272D1F8F81064 +:101BF000C989FBF7EEF991E0A068D0F8F800011D63 +:101C00000098FBF71BFAA068D0F8F80000F10C016F +:101C10000098FBF71DFAA068D0F8F80000F11E014B +:101C20000098FBF71BFAA06800F1C0010098FBF7D1 +:101C300023FA73E06269009811780171918841710B +:101C4000090A81715188C171090A017266E064E074 +:101C5000FD49D1E90001CDE9020102A90098FBF795 +:101C600025FA5BE0A068B0F844100098FBF728FA6A +:101C7000A068B0F846100098FBF726FAA068B0F804 +:101C800040100098FBF724FAA068B0F842100098C2 +:101C9000FBF722FA42E0A068B0F840100098FBF78A +:101CA00017FAA068B0F842100098FBF715FAA06880 +:101CB000B0F844100098FBF703FAA068B0F846109B +:101CC0000098FBF701FA29E0A168009891F810212B +:101CD000027191F81111417120E0A06890F8F300B1 +:101CE000FAF722FE01460098FBF735FAA06890F853 +:101CF000F200FAF719FE01460098FBF728FA0DE00A +:101D0000A06890F8ED100098FBF749FAA06890F8E9 +:101D1000EC100098FBF747FA00E0FFDFF3F70EFD49 +:101D2000002808BFFFDF0098C178012903D049B11E +:101D300018290FD013E0A168B1F802114172090A05 +:101D400081720CE0A168D1F8F81089884173090A02 +:101D5000817304E0A168B1F8F010FBF700FABB480A +:101D60000090BB4BBB4A29463046F8F7CDFFA06830 +:101D70000023052190F864205830FAF76EFC002803 +:101D800004BF05B0F0BD05B0BDE8F040F8F7C5BD33 +:101D9000B148806890F8881029B1B0F88410B0F884 +:101DA000862091421AD290F88C1029B1B0F88A108E +:101DB000B0F88620914211D2B0F88220B0F880109D +:101DC0008A420BD290F86820B0F87E0022B1884297 +:101DD00004D200BFF9F738B80628FBD3002001462B +:101DE00034E470B50C46064615464FF4A4712046FF +:101DF00002F07FFA2680002D08BFFFDF2868C4F8B4 +:101E0000F8006868C4F8FC00A868C4F8440170BD14 +:101E1000EEF7D7BE2DE9F0410D4607460621EEF755 +:101E2000C7FD040008BFBDE8F081D4F844110026C6 +:101E3000087858B14A8821888A4207D1092810D0E9 +:101E40000E281DD00D2832D008284CD094F81A0145 +:101E5000002857D06E701020287084F81A61AF8067 +:101E60003EE06E7009202870D4F844014168696032 +:101E70008168A9608089A881D4F8440106702FE0A8 +:101E80000846EEF7C7FE0746EEF773FBB0B96E7073 +:101E90000E202870D4F8440140686860D4F84401EA +:101EA00006703846EEF75FFB0120BDE8F08108467A +:101EB000EEF7B0FE0746EEF75CFB10B10020BDE880 +:101EC000F0816E700D202870D4F84401416869607B +:101ED00000892881D4F8440106703846EEF743FBA8 +:101EE0000120BDE8F0816E7008202870D4F844010C +:101EF00041688268C0686960AA60E860D4F84401FB +:101F00000670EDE794F81C01B0B16E7015202870D2 +:101F100094F81C010028E3D084F81C61D4F81E0159 +:101F20006860D4F82201A860B4F82601A88194F86A +:101F30001C010028F0D1D3E794F8280170B16E702D +:101F40001D20287084F82861D4F82A016860D4F82C +:101F50002E01A860B4F83201A881C1E794F83401D9 +:101F600040B16E701E20287084F83461D4F83601B8 +:101F70006860B5E794F8140180B16E701B2028707A +:101F800094F814010028ABD084F81461D4F8160139 +:101F9000686094F814010028F6D1A1E794F83A019A +:101FA000002808BFBDE8F0816E701620287094F8F4 +:101FB0003A01002894D000BF84F83A61D4F83C017B +:101FC0006860B4F84001288194F83A010028F3D100 +:101FD00086E7214A5061D17070472DE9F0470446E9 +:101FE000481E85B238BFBDE8F08704F10808012615 +:101FF000DFF864904FF0090A5FF00007B4F8D800EA +:10200000401CA4F8D800B4F87E00401CA4F87E0060 +:1020100094F86A0040B994F864200023062104F182 +:102020005800FAF71AFB30B3B4F87600401C80B2BF +:10203000A4F87600B4F8781081422CBF0A1A002266 +:10204000A3885B1D934209E0F44802004D1602008C +:10205000DB180200131902007C01002028BF84F85D +:102060007C60884207D3A4F8767084F81A6199F8E6 +:102070000300E9F78BFE94F8880020B1B4F88400DF +:10208000401CA4F8840094F88C0020B1B4F88A00B5 +:10209000401CA4F88A0094F8F40040B994F8672032 +:1020A0000023012104F15800FAF7D7FA20B1B4F85F +:1020B0008200401CA4F8820094F864000C2802D02E +:1020C0000D2820D067E0B4F85800411CB4F8020194 +:1020D000814260D1D4F8FC00411C404602F01EFA57 +:1020E00002212046F9F7DDFFD4F8FC000078002833 +:1020F00008BFFFDF0121FE20FEF778FE84F8647040 +:1021000084F8986047E0B4F85800411CD4F8F8000F +:10211000808881423FD1D4F844010178002918BF5A +:10212000FFDF22D12188C180D4F8F8004189D4F89A +:1021300044010181D4F8F8008189D4F84401418137 +:10214000D4F8F800C189D4F844018181D4F844015D +:102150000771D4F8440180F800A0D4F84401218824 +:10216000418099F80300E9F711FE01212046F9F7B3 +:1021700098FF03212046FEF70EFBD9F80800D0F89F +:10218000F8000078022818BFFFDF0221FE20FEF7CA +:102190002DFE84F86470B4F85800401C691EA4F841 +:1021A00058008DB2BFF42AAFBDE8F087F84AC2E903 +:1021B0000601704770B50446B0F87E0094F86810C8 +:1021C000002908BFC0F1020503D0B4F88010081A36 +:1021D000051F94F87C0040B194F864200023092185 +:1021E00004F15800FAF739FAA0B1B4F8766094F81F +:1021F0006A0058B994F864200023062104F15800BD +:10220000FAF72BFA002808BF284603D0B4F8780064 +:10221000801B001F8542C8BF0546002DD4BF00208B +:10222000A8B270BD042110B5D94CA068FEF7B3FA6E +:10223000A06890F84E10012902BF022180F84E10CC +:1022400010BD00F58A710288A0F81E21028EA0F848 +:102250002021828EA0F82221028FB0F844309A42C9 +:1022600028BF1A460A82828FB0F84600824238BFE1 +:102270001046488201200872E078BDE81040E9F776 +:1022800085BDC34830B4806890F84E30B0F832C095 +:10229000C48EB0F84010428F022B25D08A4238BF3E +:1022A00011460186C28FB0F842108A4238BF1146EB +:1022B0008186028FB0F844108A4238BF11464186A9 +:1022C000828FB0F846108A4238BF1146C186418ECF +:1022D000614588BF8C46A0F832C0C18EA14288BF3C +:1022E0000C46C48630BC7047038E9A4228BF1A46FB +:1022F000C58F838E9D4238BF2B468A4238BF114618 +:102300000186B0F842108B4228BF0B46838600211D +:1023100080F84E10CDE770B59D4CA06890F8CB10BA +:10232000FE2906BF6178002970BD90F86720002360 +:1023300001215830FAF791F9002818BF70BDA06844 +:1023400090F8F41021B1BDE870400220FEF702BD04 +:1023500090F86420002319465830FAF77EF940B10E +:10236000A06890F87C0020B1BDE870401220FEF714 +:10237000F1BCA068002590F86420122A1FD004DC6C +:10238000032A3FD0112A1FD003E0182A35D0232A70 +:1023900043D0002304215830FAF75FF9002818BF12 +:1023A00070BDD4F808C09CF8650019287CD03BDCCF +:1023B00001286BD0022879D003285DD038E0BDE831 +:1023C00070400B20FEF7C6BCF1F760FC0C2838BF4C +:1023D00070BDA0680821D0F8F8001E30F1F75AFC53 +:1023E00028B1A0680421C030F1F754FC00B9FFDF28 +:1023F000BDE870400320FEF7ADBCBDE8704006208C +:10240000FEF7A8BC90F8CA1080F8CC100720FEF7A1 +:10241000A1FCA06880F8645070BD1820FEF79AFCFB +:10242000A068A0F8845070BD1E2847D021286BD02A +:10243000DCF8F80001260178002973D04088BCF848 +:10244000001088426ED100239CF8642019460CF1DC +:102450005800FAF702F9002864D0A068D0F8F81004 +:10246000097802297ED003297DD004297CD0052952 +:1024700008BF082079D0C7E09CF8C9008CF8CC00D0 +:102480000720FEF767FCA06800F06DB90C20FEF78E +:1024900061FCA068A0F88A5090F8901041F001010A +:1024A00080F8901000F05FB96DE0FFE71320FEF7B1 +:1024B00051FCA068A0F88A5000F055B99CF80501BD +:1024C000002818BF70BD9CF8040188B1BCF8060153 +:1024D000ACF84000BCF80801ACF84200BCF80A01B6 +:1024E000ACF84400BCF80C01ACF846008CF8045180 +:1024F000FFF7C7FEFFF796FE1520FEF72BFCA0683E +:10250000A0F88A5000F02FB99CF87D0058B18CF8E3 +:10251000F2508CF8F3501820FEF71CFCA068A0F8CD +:102520008A5070BD70E09CF80F01002818BF70BD84 +:102530009CF80E01002808BF70BDDCE91416DCF819 +:102540001001FAF7F6F9F2B2C1B28A4207BFA168E8 +:1025500081F8F250A26882F8F210C6F30721C0F3A6 +:10256000072003E016E01BE03BE022E0814219BFB8 +:10257000A16881F8F300A06880F8F3501820BDE846 +:102580007040FEF7E7BB1120FEF7E4FBA068EAE02D +:102590007C01002090F86500FAF748F8A0BB08E03D +:1025A00090F8691041B190F86A00002808BFFFDF79 +:1025B0000A20FEF7CFFB27E0F1F768FB0C2823D3B6 +:1025C000A0680821D0F8F8001E30F1F763FB28B1AD +:1025D000A0680421C030F1F75DFB00B9FFDF0320E4 +:1025E000E7E790F8900010F0030F0DD10C20FEF7F4 +:1025F000B1FBA068A0F8845080F8886090F8901033 +:1026000041F0010180F89010A06890F8CB10FE29ED +:1026100018BF70BD90F86420002319465830FAF7AF +:102620001CF8002808BF70BDA06890F80011E9B33D +:10263000A1690978D1BB90F86500F9F7F7FFA8BB4D +:10264000A068B0F858100A2931D900F10801052214 +:10265000E06901F081FD0028A06804BF80F8005106 +:1026600070BDD0F8FC00017861B1411C0522E06921 +:1026700001F072FD002818BF70BDA068D0F8FC0002 +:10268000007830B9A068E169D0F8FC00401C01F086 +:1026900045FFA068D0F8FC000178491C01700120BA +:1026A000FEF758FBA06880F8005170BDFFE7A068F6 +:1026B00090F8041111B190F8051181B390F80E1142 +:1026C000002908BF70BD90F80F11002918BF70BD18 +:1026D00090F86500F9F7AAFF002818BF70BDA06840 +:1026E00090F85400012808BF012503D0022814BF28 +:1026F000FFDF0225A06890F85500012808BF0126D9 +:1027000003D0022814BFFFDF0226A168012D91F833 +:1027100010012BD0022D08BF022829D033E0FFE79B +:10272000B0F80611A0F84010B0F80811A0F8421057 +:10273000B0F80A11A0F84410B0F80C11A0F8461037 +:1027400080F8045190F865001D2804D0BDE8704061 +:102750001420FEF7FFBAFFF794FDFFF763FD152085 +:10276000FEF7F8FAA06880F8655070BD01280AD11C +:1027700091F81101012E04D0022E08BF022807D0C3 +:1027800001E0012804D0BDE870401620FEF7E2BA4F +:10279000BDE870400020FEF7FCBA70B5044690F822 +:1027A000640000250C2814D00D2818BF70BDB4F8A3 +:1027B0005800D4F8F810401C8988884218BF70BDB2 +:1027C000D4F84401FE4E0178002918BFFFDF45D13F +:1027D00022E0B4F85800B4F80211401C884218BF37 +:1027E00070BDD4F8FC00411C04F1080001F096FE15 +:1027F00002212046F9F755FCD4F8FC0000780028A7 +:1028000008BFFFDF0121FE20FEF7F0FA84F86450D4 +:10281000012084F8980070BD2188C180D4F8F800A8 +:10282000D4F8441140890881D4F8F800D4F8441150 +:1028300080894881D4F8F800D4F84411C08988818F +:10284000D4F844010571D4F8441109200870D4F873 +:10285000441120884880F078E9F798FA0121204651 +:10286000F9F71FFC03212046FDF795FFB068D0F86B +:10287000F8000078022818BFFFDF0221FE20FEF7D3 +:10288000B5FA84F8645070BD70B5CD4CA16891F86C +:102890006420162A11BF132A91F88E20002A62782C +:1028A0001BBF02206070002A70BD81F8C80000259F +:1028B00081F88D5081F88850D1F8F8000988408857 +:1028C000884218BFFFDFA068D0F8F800007803281E +:1028D00018BFFFDF0321FE20FEF788FAA068D0F8BA +:1028E00044110A78002A18BFFFDF19D10288CA8074 +:1028F000D0F8442190F8C8101171D0F844110D722D +:10290000D0F844210D211170D0F844210188518064 +:102910000088EEF77FF9EDF717FEE078E9F736FA71 +:10292000A06880F8645070BD10B5A54C207910F0F7 +:10293000020F08BF10BD6078002818BF10BDE06806 +:10294000C078192880F06981DFE800F05F4F0D8FB3 +:10295000F8F8A6223FF86F83B1F8F8F8F8F7E3E04B +:10296000F9F5F4F8F300A0680023012190F867203E +:102970005830F9F772FE002818BF10BD0821A06872 +:1029800080F86710002180F8881080F88C1010BD46 +:10299000A0680023194690F865205830F9F75DFECD +:1029A00018B1A168002081F88C00A06800231946A6 +:1029B00090F864205830F9F750FE002808BF10BD89 +:1029C0000020A16881F8880010BDA0680023194686 +:1029D00090F864205830F9F740FE002808BFFFDF68 +:1029E0000420A16881F8640010BDA0680023194686 +:1029F00090F864205830F9F730FE002808BFFFDF58 +:102A00000C20A16881F8640010BDA068002319465D +:102A100090F864205830F9F720FE002808BFFFDF47 +:102A20000D20A16881F8640010BDA068002319463C +:102A300090F864205830F9F710FE002808BFFFDF37 +:102A40000121A06880F88D105FF00F0180F86410FC +:102A500010BDA06890F86400122818BFFFDF0121A4 +:102A6000A06880F88E101121F0E7A06800231946B5 +:102A700090F864205830F9F7F0FD28B9A06890F874 +:102A80008E00002808BFFFDF0121A06880F88D10AC +:102A9000132180F8641010BDA06890F86400182815 +:102AA00018BFFFDF1A20A16881F8640010BDA0687C +:102AB000D0F8F81003884A889A4204BF097804299C +:102AC00019D190F86420002319465830F9F7C5FD54 +:102AD000002808BFFFDFA06890F8901011F0020FE7 +:102AE00004BF012180F8641005D0002180F888100F +:102AF000D0F8F8000170A0680023194690F865200E +:102B00005830F9F7AAFD002808BF10BD0020A168C1 +:102B100080E0A0680023194690F864205830F9F747 +:102B20009CFD002808BFFFDF0520A16881F8640034 +:102B300010BD30E01FE012E001E067E06DE0A0684A +:102B40000023194690F864205830F9F786FD0028D4 +:102B500008BFFFDF1C20A16881F86400E8E7A068D7 +:102B60000023194690F865205830F9F776FD0028C3 +:102B700008BFFFDFCAE7A0680023194690F8642069 +:102B80005830F9F76AFD002808BFFFDF1F20A16851 +:102B900081F86400CCE7A06890F8651021291DD069 +:102BA00090F86410232918BFFFDFC1D190F8F2100C +:102BB000002906BF90F8F3100029242102E000004C +:102BC0007C01002018BF80F864107FF4F9AE00216A +:102BD00080F864100846FEF7DCF8F1E690F8F21091 +:102BE000002907BF90F8F3100029242180F8651010 +:102BF0008CD1002180F8651080F87D1090F80E01CE +:102C000000281CBF0020FEF7C4F87FE7A168002061 +:102C100081F8650081F88C008AE7FFDF88E7000013 +:102C200070B58D4C0829207A63D2DFE801F0041AD0 +:102C30005A5A2662625A80B1F1F7EDFD012211461F +:102C40001046F1F7F0FFF2F7FDFC0020A072F1F75B +:102C5000A1FEBDE87040F2F76EB9BDE87040EFF735 +:102C6000E3BED4E90001EFF7DCFC2060A07A401C51 +:102C7000C0B2A07228281CD370BDA07A0025401EC7 +:102C8000C6B2E0683044F2F748FA10B9E1687F2034 +:102C90008855A07A272828BF01252846F2F782FC0C +:102CA000A07A282809D2401CC0B2A072282828BFC8 +:102CB00070BDBDE87040F1F76DBE207A00281CBFE2 +:102CC000012000F085F8F2F7C3F8F2F72CF90120A3 +:102CD000E07262480078E9F759F8BDE87040EFF714 +:102CE000A3BE002808BF70BD0020BDE8704000F002 +:102CF0006FB8FFDF70BD10B5574C207A002804BFB5 +:102D00000C2010BD00202072E072607AF0F7DAFA31 +:102D1000607AF0F724FD607AEFF75BFF00280CBFC4 +:102D20001F20002010BD002270B54B4C06460D46FA +:102D3000207A68B12272E272607AF0F7C3FA607AA0 +:102D4000F0F70DFD607AEFF744FF002808BFFFDFC2 +:102D50004248E560067070BD70B5050007D0A5F566 +:102D6000E8503F494C3881429CBF122070BD3A4C1C +:102D7000E068002804BF092070BD207A00281CBF2D +:102D80000C2070BD3748EFF7CAFE6072202804BFE0 +:102D90001F2070BDEFF73CFF2060002D1CBF2844B2 +:102DA0002060012065602072002000F011F80020F2 +:102DB00070BD2949CA7A002A04BF002070471F222B +:102DC000027000224270CB684360CA7201207047D3 +:102DD0002DE9F04184B00746EFF71AFF1E4D8046FB +:102DE000414668682C6800EB800046002046F0F7FA +:102DF0001DFCB04206DB6868811B4046EFF711FC02 +:102E00000446286040F2337621464046F0F70EFC37 +:102E1000B04204DA31464046EFF703FC0446002096 +:102E20008DF8000040F2E760039004208DF8050063 +:102E3000002F14BF012003208DF80400684602947F +:102E4000F0F7B3F8687A6946F0F72AF9002808BF66 +:102E5000FFDF04B0BDE8F081AC1200209C0100202F +:102E6000B5EB3C00212C02002DE9F0410C46124943 +:102E70000D68114A114908321160A0F12001312971 +:102E800001D301200CE0412810D040CC0C4F94E835 +:102E90000E0007EB8000241F50F8807C3046B847B6 +:102EA00020600548001D0560BDE8F0812046DEF782 +:102EB00097F9F5E706207047100502400100000170 +:102EC000FC48020010B5524800F038FA00B1FFDFAC +:102ED0004F48401C00F032FA002800D0FFDF10BD40 +:102EE0002DE9F14F4B4ED6F800B00127484800F0CD +:102EF0002DFADFF81C8128B95FF0000708F1010006 +:102F000000F03AFA444C00254FF0030901206060BC +:102F1000C4F80051C4F80451009931602060DFF812 +:102F2000FCA018E0DAF80000C00614D50E2000F06E +:102F300064F8EFF3108010F0010072B600D00120A9 +:102F4000C4F80493D4F8001119B9D4F8041101B9E4 +:102F500020BF00B962B6D4F8000118B9D4F8040152 +:102F60000028DFD0D4F804010028CFD137B1C6F84B +:102F700000B008F1010000F0E9F911E008F10100EA +:102F800000F0E4F90028B9D1C4F80893C4F804515A +:102F9000C4F800510E2000F030F81D4800F0ECF9A4 +:102FA0000020BDE8F88F2DE9F0438DB00D460646B0 +:102FB00000240DF110090DF1200817E004EB44077F +:102FC000102255F82710684601F0F2F805EB870744 +:102FD00010224846796801F0EBF86846FFF780FF59 +:102FE00010224146B86801F0E3F8641CB442E5DB06 +:102FF0000DB00020BDE8F08372E700F01F02012150 +:1030000091404009800000F1E020C0F88012704734 +:103010009D01002004E5004000E0004010ED00E0CC +:10302000AA4900200870704770B5A94D01232B6094 +:10303000A84B1C68002CFCD0002407E00E6806603A +:103040001E68002EFCD0001D091D641C9442F5D39F +:103050000020286018680028FCD070BD70B59B4E19 +:1030600004469D4D3078022800D0FFDFAC4200D3EB +:10307000FFDF71699948012903D847F23052944221 +:1030800001DD03224271491C7161291BC160934912 +:103090007078F0F705F8002800D1FFDF70BD70B53B +:1030A0008A4C0D466178884200D0FFDF8A4E082D99 +:1030B0004BD2DFE805F04A041E2D4A4A4A382078F0 +:1030C000022800D0FFDF03202070A078012801D063 +:1030D00020B108E0A06800F0B7FD04E004F10800AA +:1030E00007C8FFF7A1FF05202070BDE87040EFF78B +:1030F0009BBCEFF78DFD01466068F0F797FAB04290 +:1031000002D2616902290BD30320F0F74CFD12E0D3 +:10311000EFF77EFD01466068F0F788FAB042F3D21F +:10312000BDE870409AE7207802280AD0052806D02A +:10313000FFDF04202070BDE8704000F0BDB8022021 +:1031400000E00320F0F72FFDF3E7FFDF70BD70B55F +:103150000546EFF75DFD5D4C60602078012800D0EA +:10316000FFDF5E49012008700020087104208D6097 +:1031700048715948C860022020706078EFF790FFCE +:10318000002800D1FFDF70BD10B5504C207838B951 +:103190000220F0F71EFD18B90320F0F71AFD08B160 +:1031A000112010BD4E48EFF7BAFC6070202804D003 +:1031B000012020700020606110BD032010BD2DE9AA +:1031C000F041144600EB84070E4605463F1F00F011 +:1031D0004EFD4FF080521169484306EB8401091FF0 +:1031E000B14201D2012100E000211CB11269B4EB0F +:1031F000920F02D90920BDE8F0813A4A95420ED3D8 +:10320000AF420CD3854205D2874203D245EA06007D +:10321000800701D01020EEE7964200D309B10F20BD +:10322000E9E7314831490068884205D022463146F5 +:103230002846FFF7F9FE10E0FFF7A6FF0028DAD1D5 +:10324000224800218560C0E9036481704FF4A971B0 +:1032500004FB01F01830FFF77AFF0020CBE770B5D0 +:103260004FF08055044628691E49B1FBF0F08442B6 +:1032700001D20F2070BD00F0FAFCA04201D810204E +:1032800070BD194819490068884204D02869604314 +:1032900000F0DAFC0CE0FFF777FF0028F0D1296995 +:1032A0000A4861438160012181701148FFF74FFF97 +:1032B000002070BD00F024BF10B5044C6078EFF71B +:1032C00088FC00B9FFDF0020207010BDA0010020A5 +:1032D00004E5014000E40140105C0C00BC12002039 +:1032E0009F30020000600200B0000020BEBAFECA9B +:1032F0007C5E01004FF08050D0F83011062903D0D9 +:10330000D0F83011491C07D1D0F83411062905D363 +:10331000D0F83401401C01D00020704701207047D4 +:103320004FF08050D0F83011062905D1D0F8340183 +:10333000062801D30120704700207047002101704A +:10334000084670470146002008707047EFF310816F +:1033500001F0010172B60278012A01D0012200E0D9 +:1033600000220123037001B962B60AB10020704740 +:103370004FF400507047E9E7EFF3108111F0010FAF +:1033800072B64FF00002027000D162B600207047A2 +:10339000F2E700004C4909680160002070474A4983 +:1033A00008600020704701218A0720B1012804D05D +:1033B00042F204007047916700E0D1670020704737 +:1033C00042490120086042F20600704708B5042314 +:1033D0003E4A1907103230B1C1F80433106840F08A +:1033E000010010600BE0106820F001001060C1F8CF +:1033F00008330020C1F8080135480068009000201B +:1034000008BD011F0B2909D8304910310A6822F084 +:103410001E0242EA400008600020704742F20500A8 +:103420007047000100F18040C0F804190020704787 +:10343000000100F18040C0F8081900207047000129 +:1034400000F18040D0F80009086000207047012892 +:1034500001D9072070471F4A52F8200002680A432A +:10346000026000207047012801D907207047194ADF +:1034700052F8200002688A43026000207047012849 +:1034800001D907207047134A52F8200000680860ED +:1034900000207047020010494FF0000003D0012ABD +:1034A00001D0072070470A6070474FF0804100202C +:1034B000C1F808014FF0E020802180F800140121BC +:1034C000C0F80011704700000004004000050040F3 +:1034D00008010040C0490200780500406249634B82 +:1034E0000A6863499A42096801D1C1F31001016079 +:1034F000002070475C495D4B0A685D49091D9A428E +:1035000001D1C0F310000860002070475649574BA6 +:103510000A68574908319A4201D1C0F31000086087 +:103520000020704730B5504B504D1C6842F20803E4 +:10353000AC4202D0142802D203E0112801D318466D +:1035400030BDC3004B481844C0F81015C0F814250E +:10355000002030BD4449454B0A6842F209019A42B5 +:1035600002D0062802D203E0042801D3084670479F +:10357000404A012142F83010002070473A493B4B45 +:103580000A6842F209019A4202D0062802D203E0F8 +:10359000042801D308467047364A012102EBC000D7 +:1035A00041600020704770B52F4A304E314C15688D +:1035B00042F2090304EB8002B54204D0062804D28B +:1035C000C2F8001807E0042801D3184670BDC1F303 +:1035D0001000C2F80008002070BD70B5224A234ECA +:1035E000244C156842F2090304EB8002B54204D072 +:1035F000062804D2D2F8000807E0042801D31846B0 +:1036000070BDD2F80008C0F310000860002070BD43 +:10361000174910B50831184808601120154A0021D3 +:1036200002EBC003C3F81015C3F81415401C14288E +:10363000F6D3002006E0042804D302EB8003C3F88D +:10364000001807E002EB8003D3F80048C4F310042D +:10365000C3F80048401C0628EDD310BD04490648B5 +:103660000831086070470000B0000020BEBAFECAF2 +:1036700000F5014000F001400000FEFF7E4B1B689A +:1036800003B19847BFF34F8F7C4801687C4A01F42F +:10369000E06111430160BFF34F8FFEE710B5EFF318 +:1036A000108010F0010F72B601D0012400E0002458 +:1036B00000F0D9F850B1DDF72DFEEFF776F8F0F70E +:1036C00013FADFF7A2FB6F490020086004B962B665 +:1036D000002010BD70B50C460546EFF3108010F0C9 +:1036E000010F72B601D0012600E0002600F0BBF801 +:1036F00018B106B962B6082070BDDDF787FDDDF7A9 +:103700000DFE0246002043099B0003F1E02300F078 +:103710001F01D3F80031CB40D9071BD0202803D29A +:1037200022FA00F1C90722D141B2002906DA01F0DC +:103730000F0101F1E02191F8141D03E001F1E021F6 +:1037400091F800144909082911D281B101290ED03C +:1037500004290CD0401C6428D5D3DFF72DFB494940 +:10376000494808602046F0F7D9FD60B904E006B981 +:1037700062B641F2010070BD3F4804602DB1284699 +:10378000F0F719FE18B110242CE0404D19E028780C +:10379000022802D94FF4805424E0072400286878D6 +:1037A00001D0F8B908E0E8B120281BD8A878212872 +:1037B00018D8012816D001E0A87898B9E8780B2825 +:1037C00010D83349802081F8140DDDF7A7FD294674 +:1037D000F0F770F9EEF7A8FF00F07CFA2846DDF765 +:1037E0006BFD044606B962B61CB1FFF757FF2046D1 +:1037F00070BD002070BD10B5044600F034F800B173 +:1038000001202070002010BD224908600020704770 +:1038100070B50C4620490D681F49204E08310E60D6 +:10382000102807D011280CD012280FD0132811D03F +:10383000012013E0D4E90001FFF74CFF354620607A +:103840000DE0FFF72BFF0025206008E02068FFF760 +:10385000D2FF03E00F4920680860002020600E4876 +:10386000001D056070BD074807490068884201D106 +:103870000120704700207047B80100200CED00E0E7 +:103880000400FA05B0000020BEBAFECAC849020012 +:103890000BE000E0040000201005024001000001E0 +:1038A00000B5C44910F1080F08BFF82024D014DC7B +:1038B00010F1280F08BFD8201ED010F1140F08BF38 +:1038C000EC2019D010F1100F08BFF02014D010F127 +:1038D0000C0F08BFF4200FD00CE010F1040F08BF4C +:1038E000FC2009D0002818BF032805D0042804BFF5 +:1038F000086000BDFFDF00BD086000BD00B5AE4937 +:10390000012808BF032004D0022816BFFFDF0420CF +:1039100000BD086000BDA949002804BF086820F068 +:10392000010005D0012806BF086840F0010070477B +:103930000860704770B51E460546012924D0022A4A +:1039400004BF9F484FF47A710DD0012A04BF9D48EF +:103950004FF4C86107D0042A07BF9B4840F698017E +:103960009A4840F6E44144181846F1F744FE0444EE +:103970003046F1F75EFE20444FF47A7100F2712078 +:10398000B0FBF1F0281A70BD022A08BF4FF47A701C +:103990000AD0012A08BF4FF4C86005D0042A0CBF22 +:1039A00040F6980040F6E44049F608514418DBE739 +:1039B00070B514460546012908BF49F6CA660DD000 +:1039C000022B08BF824807D0012B08BF7D4803D0D7 +:1039D000042B0CBF7C487F4800F1FA061046F1F733 +:1039E00019FE012C08BF4FF47A710AD0022C08BFCF +:1039F0004FF4FA7105D0042C0CBF4FF4FA614FF468 +:103A0000FA51711A08444FF47A7100F28920B0FB20 +:103A1000F1F0281A801E70BD70B5144606460129C3 +:103A200030D0022B04BF66494FF47A700DD0012BC1 +:103A300004BF64494FF4C86007D0042B07BF624934 +:103A400040F69800614940F6E4400D181046F1F741 +:103A5000E1FD012C08BF4FF47A710AD0022C08BF97 +:103A60004FF4FA7105D0042C0CBF4FF4FA614FF4F7 +:103A7000FA51691A08444FF47A716438B0FBF1F0D6 +:103A8000301A70BD022B08BF4FF47A700AD0012B98 +:103A900008BF4FF4C86005D0042B0CBF40F6980057 +:103AA00040F6E44049F608514518CFE770B5164690 +:103AB0000446012908BF49F6CA650DD0022B08BF8C +:103AC000434807D0012B08BF3E4803D0042B0CBF4E +:103AD0003D48404800F1FA051046F1F78CFD0544D9 +:103AE0003046F1F7A6FD28444FF47A7100F2E14028 +:103AF000B0FBF1F0201A801E70BD2DE9F0410746A1 +:103B00001E460C4615461046082A16BF04284DF6D8 +:103B10008830F1F770FD07EB4701C1EBC71100EBEF +:103B2000C100012C08BF4FF47A710AD0022C08BFE3 +:103B30004FF4FA7105D0042C0CBF4FF4FA614FF426 +:103B4000FA5147182046F1F765FD381A4FF47A719B +:103B500000F60F60B0FBF1F42846F1F740FD204479 +:103B60003044401DBDE8F08170B5054614460E4650 +:103B70000846F1F740FD05EB4502C2EBC512C0EB6C +:103B8000C2053046F1F755FD2D1A2046082C16BF08 +:103B900004284DF68830F1F72EFD28444FF47A7151 +:103BA00000F6B730B0FBF1F52046F1F718FD2844D8 +:103BB000401D70BD0C15004010150040501600400F +:103BC00068360200A2240200D0FB010030D30100BD +:103BD00004360200C0D401002DE9FE430C468046A5 +:103BE000F9F7BAF9074698F80160204601A96A4634 +:103BF000ECF79BFC05000DD0012F02D00320BDE89F +:103C0000FE83204602AA0199ECF7B1FB0298B0F8B6 +:103C100003000AE0022F14D1042E12D3B8F80300D7 +:103C2000BDF80020011D914204D8001D80B2A919E1 +:103C3000814202D14FF00000E1E702D24FF00100D3 +:103C4000DDE74FF00200DAE70B4A022111600B4971 +:103C50000B68002BFCD0084B1B1D1860086800285F +:103C6000FCD00020106008680028FCD070474FF09E +:103C7000805040697047000004E5014000E40140C5 +:103C800002000B464FF00000014620D0012A04D06C +:103C9000022A04D0032A0DD103E0012002E0022011 +:103CA00015E00320072B05D2DFE803F00406080A1D +:103CB0000C0E100007207047012108E0022106E0E9 +:103CC000032104E0042102E0052100E00621EEF7D3 +:103CD00042BF0000F9480521817000210170417048 +:103CE0007047F7490A78012A05D0CA681044C860AD +:103CF0004038EFF768BC8A6810448860F8E700280D +:103D000019D00378EF49F04A13B1012B0ED011E01E +:103D10000379012B00D06BB943790BB1012B09D189 +:103D20008368643B8B4205D2C0680EE00379012BA7 +:103D300002D00BB10020704743790BB1012BF9D1B0 +:103D4000C368643B8B42F5D280689042F2D8012070 +:103D50007047DB4910B501220A700279A2B1002236 +:103D60000A71427992B104224A718268D34C52326C +:103D70008A60C0681434C8606060EEF749FFCF49BC +:103D800020600220887010BD0322E9E70322EBE7E0 +:103D900070B5044609B1012000E00320C84D0021A0 +:103DA0002970217901B100202871607968B104205F +:103DB000C24E6871A168F068EEF733FCA860E06855 +:103DC0005230E8600320B07070BD0320F0E72DE9A9 +:103DD000F04105460226EFF722FB006800B1FFDF45 +:103DE000B64C01273DB12878B0B1012805D0022892 +:103DF00010D0032813D027710CE06868C82807D3B7 +:103E0000EFF747FC20B16868FFF76BFF012603E07E +:103E1000002601E000F05CF93046BDE8F081207832 +:103E20000028F7D16868FFF76AFF0028E3D06868C8 +:103E3000017879B1A078042800D0FFDF01216868FB +:103E4000FFF7A6FF9E49E078EFF72AF90028E1D1B5 +:103E5000FFDFDFE7FFF77DFF6770DBE72DE9F04766 +:103E6000964C8846E178884200D0FFDFDFF84C921C +:103E700000250127924E09F11409B8F1080F75D2F7 +:103E8000DFE808F0040C28527A808D95A07803288A +:103E900002D0022800D0FFDFBDE8F087A078032819 +:103EA00002D0022800D0FFDF0420A0702571207806 +:103EB000002878D1FFF715FF3078012806D0B068C8 +:103EC000E06000F031F92061002060E0E078EEF77A +:103ED000E4FFF5E7A078032802D0022800D0FFDF36 +:103EE000207800286DD1A078032816D0EEF790FE38 +:103EF00001464F46D9F80000EFF798FB00280EDB8B +:103F0000796881420BDB081AF0606D49E078EFF7C1 +:103F1000C7F80028C0D1FFDFBEE7042028E0042056 +:103F2000EFF741FEA570B7E7A078032802D002287A +:103F300000D0FFDF207888BBA078032817D0EEF7E9 +:103F400067FE01464F46D9F80000EFF76FFB0028E7 +:103F5000E5DB79688142E2DB081AF0605849E078D5 +:103F6000EFF79EF8002897D1FFDF95E740E00520A6 +:103F7000EFF719FEA7708FE7A078042800D0FFDFC5 +:103F8000022004E0A078042800D0FFDF0120A1680F +:103F90008847FFF71CFF054630E004E011E0A078F9 +:103FA000042800D0FFDFBDE8F04700F091B8A0780A +:103FB000042804D0617809B1022800D0FFDF2078FE +:103FC00018B1BDE8F04700F08CB8207920B1062088 +:103FD000EFF7E9FD2571CDE7607838B13849E07831 +:103FE000EFF75EF800B9FFDF657055E70720BFE720 +:103FF000FFDF51E73DB1012D03D0FFDF022DF9D1E5 +:104000004AE70420C3E70320C1E770B5050004D0E8 +:104010002A4CA078052806D101E0102070BD0820A8 +:10402000EFF7D7FD08B1112070BD2848EEF777FDF6 +:10403000E070202803D00020A560A07070BD032090 +:1040400070BD1E4810B5017809B1112010BD8178EE +:10405000052906D0012906D029B1012101700020CF +:1040600010BD0F2010BD00F03CF8F8E770B5134C00 +:104070000546A07808B1012809D155B12846FFF7B7 +:104080003EFE40B1287840B1A078012809D00F2029 +:1040900070BD102070BD072070BD2846FFF759FE87 +:1040A00003E000212846FFF773FE0549E078EEF7AC +:1040B000F7FF00B9FFDF002070BD0000BC01002049 +:1040C000CC1200203D860100FF1FA1075D3E0200CB +:1040D0000A4810B5006900F01FF8BDE81040EEF77F +:1040E000A3BC064810B5C078EEF773FD00B9FFDF3A +:1040F0000820EFF758FDBDE81040EBE5BC010020BB +:1041000010B5134C2060201D016011481030026072 +:10411000001D0360002010BD0E490A6848F202131A +:104120009A4302430A6070470A4A116848F2021330 +:1041300001EA0300994311607047054B02465B4258 +:1041400010201344FC2B01D81160002070470000A0 +:1041500000060040C806024040EA010310B59B0774 +:104160000FD1042A0DD310C808C9121F9C42F8D0E1 +:1041700020BA19BA884201D9012010BD4FF0FF3092 +:1041800010BD1AB1D30703D0521C07E0002010BDA8 +:1041900010F8013B11F8014B1B1B07D110F8013B34 +:1041A00011F8014B1B1B01D1921EF1D1184610BD15 +:1041B000032A40F2308010F0030C00F0158011F853 +:1041C000013BBCF1020F624498BF11F801CB00F82B +:1041D000013B38BF11F8013BA2F1040298BF00F87F +:1041E00001CB38BF00F8013B11F0030300F025803C +:1041F000083AC0F0088051F8043B083A51F804CB63 +:10420000A0E80810F5E7121D5CBF51F8043B40F828 +:10421000043BAFF30080D20724BF11F8013B11F833 +:1042200001CB48BF11F8012B24BF00F8013B00F877 +:1042300001CB48BF00F8012B704710B5203AC0F001 +:104240000B80B1E81850203AA0E81850B1E8185097 +:10425000A0E81850BFF4F5AF5FEA027C24BFB1E8D4 +:104260001850A0E8185044BF18C918C0BDE8104045 +:104270005FEA827C24BF51F8043B40F8043B08BF4E +:104280007047D20728BF31F8023B48BF11F8012B15 +:1042900028BF20F8023B48BF00F8012B704702F00E +:1042A000FF0343EA032242EA024200F002B84FF061 +:1042B00000020429C0F0128010F0030C00F01B80F3 +:1042C000CCF1040CBCF1020F18BF00F8012BA8BF01 +:1042D00020F8022BA1EB0C0100F00DB85FEAC17CC5 +:1042E00024BF00F8012B00F8012B48BF00F8012B78 +:1042F00070474FF0000200B51346944696462039A9 +:1043000022BFA0E80C50A0E80C50B1F12001BFF48E +:10431000F7AF090728BFA0E80C5048BF0CC05DF8F4 +:1043200004EB890028BF40F8042B08BF704748BF42 +:1043300020F8022B11F0804F18BF00F8012B7047B6 +:10434000FEDF04207146084219D10699124A9142B3 +:1043500015DC069902394878DF2810D10878FE2844 +:1043600007D0FF280BD14FF001004FF000020B4B9C +:10437000184741F201000099019A084B1847084B71 +:10438000002B02D01B68DB6818474FF0FF307146E6 +:104390004FF00002014B1847006002007D3602001A +:1043A00004000020184819497047FFF7FBFFDCF7AD +:1043B00005FF00BD4FF4805015490968884203D1BC +:1043C000144A13605B68184700BD000020BFFDE77A +:1043D0004FF480500E490968884210D10E4B18687E +:1043E0004FF0FF318842F1D080F308884FF0202150 +:1043F000884204DD0948026803210A430260084834 +:10440000804708488047FFDFE0120020E0120020CC +:104410000000002004000020006002001409004099 +:10442000F5430100B543020004207146084202D062 +:10443000EFF3098101E0EFF3088188690238007821 +:10444000102813DB20280FDB2C280BDB0A4A12680C +:104450000A4B9A4203D1602804DB094A1047022024 +:1044600008607047074A1047074A1047074A126812 +:104470002C32126810470000B0000020BEBAFECAFD +:1044800021130000692E02001138020004000020F0 +:104490000D4B0E4908470E4B0C4908470D4B0B4975 +:1044A00008470D4B094908470C4B084908470C4B76 +:1044B000064908470B4B054908470B4B034908477A +:1044C0000A4B02490847000049BB00000D2F0000BD +:1044D0006D2C0000092B0000972A00000F2D000012 +:1044E0003D13000053280000C1BD0000C9110000A9 +:1044F00000210160017170470021016081807047D7 +:10450000002101604160017270470A684B680260D7 +:104510004360B1F808C0A0F808C070470A6802609C +:104520000B79037170470000B19500003B970000C4 +:1045300099980000BD980000F79800002B990000A2 +:104540005D9900008D990000039A00008996000093 +:10455000A7120000A712000075440000C14400002B +:10456000E5440000794500009546000057470000EB +:1045700089470000714800000349000057490000C6 +:104580003D4A00005D4A0000DF15000003160000F0 +:10459000331500008715000035160000C91600000D +:1045A0005B6000000B620000DF650000F566000044 +:1045B0007F670000FD6700006168000085690000FA +:1045C000556A0000C16A00007F4A0000854A000069 +:1045D0008F4A000085410000F74A00005941000061 +:1045E0007B4C0000B34C0000294D00000F4E000032 +:1045F000254E0000A7120000A7120000A71200001D +:10460000A7120000A7120000A7120000A7120000C6 +:10461000A7120000BF24000045250000612500000E +:104620007D2500000B270000A7250000B125000014 +:10463000F325000015260000F126000033270000B6 +:10464000A7120000A71200005F8300007F83000014 +:1046500081830000C5830000F3830000E184000033 +:104660006F85000083850000D1850000C1860000B1 +:10467000678800009189000073730000A989000019 +:10468000A7120000A7120000C9B4000033B6000052 +:1046900087B60000F3B60000A3B7000001000000D9 +:1046A00000000000100110013A0200001A02000090 +:1046B000F3900000E1900000FFFFFFFF0000FFFF0C +:1046C000C5AC0000253D000065200000BD73000062 +:1046D000598E0000000000000000020000000000F1 +:1046E00000020000000000000001000000000000C7 +:1046F0000B810000EB800000598100004124000084 +:1047000003240000232400002FA800005BA8000061 +:1047100063AA0000515900007981000000000000E8 +:10472000A98100008F2400000000000000000000AC +:104730000000000045A9000000000000E55900004D +:10474000000000004808000048080000D3560000A0 +:10475000D35600005144000071AB00003F760000CA +:10476000771F0000E31D02004F9401001157000065 +:104770001157000073440000D3AB0000C376000063 +:10478000E91F0000111E0200639401007001700116 +:10479000400038005C0024004801000200000300D3 +:1047A000656C746200000000000000000000000062 +:1047B0000000000087000000000000000000000072 +:1047C00000000000BE83605ADB0B376038A5F5AAF5 +:1047D0009183886C010000007911010041200100E3 +:1047E00000000001020603040500000007000000AD +:1047F00000000000060000000A0000003200000077 +:1048000073000000B4000000DD860100DB0C020034 +:10481000CB6C010065AE010059F0010065AE0100EE +:10482000616E01001DB00100E3E701001DB0010051 +:10483000476B0100B1AF010087EF0100B1AF01008C +:10484000C76C010079AE0100E9DF010079AE01001B +:104850005972010091B20100EFF0010091B2010024 +:104860000300000001555555D6BE898E0000C706CD +:10487000C70CC71200006B030F06B3080000B70493 +:10488000A708970CF401FA00960064004B00320070 +:104890001E0014000A000500020001000041000093 +:1048A00000000000AAAED7AB154120100C0802177B +:1048B0000D0101020909010106020918180301018D +:1048C0000909030305000000FE000000FE000000CF +:1048D000FE555555252627D6BE898E00F401FA00CF +:1048E000960064004B0032001E0014000A00050010 +:1048F000020001002541000000000000DD3402003C +:10490000F53402000D350200253502005535020050 +:104910007D350200A7350200DB3502005F32020060 +:10492000BF310200B53202003B4102003D330200BC +:104930004D330200793302009F3C0100A73C010087 +:10494000B93C0100A7330200C133020095330200D5 +:104950009F330200CD33020003340200B52E020063 +:1049600023340200313402003F3402004F3402008D +:10497000673402007F34020095340200B52E020035 +:104980000000000077B90000CDB90000E3B90000D5 +:10499000813C0200E12E0200A72F02000B40020022 +:1049A000434002006D400200493B0100C93E010046 +:1049B000B52E0200B52E0200B52E0200B52E020063 +:1049C0001C0500402005004000100200EC490200D8 +:1049D00008000020D001000044110000244A020019 +:1049E000D801002008110000A0110000011813C810 +:1049F000140250201A0102227C2720FB349B5F8086 +:104A00001280021A10138B091B2048041ACE0401CD +:104A1000200B50A40AAC01300912CB637F010B6854 +:044A2000CC10A00016 +:00000001FF diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/mbed_lib.json b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/mbed_lib.json new file mode 100644 index 0000000000..23292cb743 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/TARGET_SOFTDEVICE_S132_FULL/mbed_lib.json @@ -0,0 +1,42 @@ +{ + "name": "softdevice", + "macros": [ + "SOFTDEVICE_PRESENT=1", + "S132", + "BLE_STACK_SUPPORT_REQD", + "NRF_SDH_CLOCK_LF_SRC=1", + "NRF_SDH_CLOCK_LF_RC_CTIV=0", + "NRF_SDH_CLOCK_LF_RC_TEMP_CTIV=0", + "NRF_SDH_CLOCK_LF_XTAL_ACCURACY=7", + "NRF_SD_BLE_API_VERSION=5", + "NRF_SDH_ENABLED=1", + "NRF_SDH_BLE_ENABLED=1", + "PEER_MANAGER_ENABLED=1", + "NRF_SDH_BLE_GATT_MAX_MTU_SIZE=23", + "NRF_SDH_BLE_OBSERVER_PRIO_LEVELS=4", + "NRF_SDH_BLE_GAP_EVENT_LENGTH=3", + "BLE_ADV_BLE_OBSERVER_PRIO=1", + "BLE_CONN_STATE_BLE_OBSERVER_PRIO=0", + "BLE_CONN_PARAMS_BLE_OBSERVER_PRIO=1", + "NRF_BLE_GATT_BLE_OBSERVER_PRIO=1", + "NRF_SDH_DISPATCH_MODEL=2", + "NRF_SDH_SOC_ENABLED=1", + "NRF_SDH_STACK_OBSERVER_PRIO_LEVELS=2", + "NRF_SDH_STATE_OBSERVER_PRIO_LEVELS=2", + "NRF_SDH_SOC_OBSERVER_PRIO_LEVELS=2", + "NRF_SDH_REQ_OBSERVER_PRIO_LEVELS=2", + "NRF_SDH_BLE_STACK_OBSERVER_PRIO=0", + "NRF_SDH_SOC_STACK_OBSERVER_PRIO=0", + "FDS_BACKEND=2", + "SWI_DISABLE1", + "SWI_DISABLE2", + "SWI_DISABLE3", + "SWI_DISABLE4", + "SWI_DISABLE5" + ], + "target_overrides": { + "*": { + "target.bootloader_img": "hex/s132_nrf52_6.0.0_softdevice.hex" + } + } +} diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/legacy/nrf_drv_rng.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/legacy/nrf_drv_rng.h new file mode 100644 index 0000000000..3a4b306225 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/legacy/nrf_drv_rng.h @@ -0,0 +1,115 @@ +/** + * Copyright (c) 2016 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef NRF_DRV_RNG_H__ +#define NRF_DRV_RNG_H__ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup nrf_drv_rng RNG driver - legacy layer + * @{ + * @ingroup nrf_rng + * + * @brief Layer providing compatibility with the former API. + */ + +/** @brief Type definition for forwarding the new implementation. */ +typedef nrfx_rng_config_t nrf_drv_rng_config_t; + +/** @brief Macro for forwarding the new implementation. */ +#define NRF_DRV_RNG_DEFAULT_CONFIG NRFX_RNG_DEFAULT_CONFIG + +/** + * @brief Function for initializing the nrf_drv_rng module. + * + * @param[in] p_config Initial configuration. + * + * @retval NRF_SUCCESS Driver was successfully initialized. + * @retval NRF_ERROR_MODULE_ALREADY_INITIALIZED Driver was already initialized. + */ +ret_code_t nrf_drv_rng_init(nrf_drv_rng_config_t const * p_config); + +/** + * @brief Function for uninitializing the nrf_drv_rng module. + */ +void nrf_drv_rng_uninit(void); + +/** + * @brief Function for getting the number of currently available random bytes. + * + * @param[out] p_bytes_available The number of bytes currently available in the pool. + */ +void nrf_drv_rng_bytes_available(uint8_t * p_bytes_available); + +/** + * @brief Function for getting the vector of random numbers. + * + * @param[out] p_buff Pointer to uint8_t buffer for storing the bytes. + * @param[in] length Number of bytes to take from the pool and place in p_buff. + * + * @retval NRF_SUCCESS If the requested bytes were written to p_buff. + * @retval NRF_ERROR_NOT_FOUND If no bytes were written to the buffer because there were + * not enough bytes available in the pool. + */ +ret_code_t nrf_drv_rng_rand(uint8_t * p_buff, uint8_t length); + +/** + * @brief Blocking function for getting an arbitrary array of random numbers. + * + * @note This function may execute for a substantial amount of time depending on the length + * of the buffer required and on the state of the current internal pool of random numbers. + * + * @param[out] p_buff Pointer to uint8_t buffer for storing the bytes. + * @param[in] length Number of bytes place in p_buff. + */ +void nrf_drv_rng_block_rand(uint8_t * p_buff, uint32_t length); + +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif // NRF_DRV_RNG_H__ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/nrfx_glue.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/nrfx_glue.h index 673b98de9c..8f1f58fdda 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/nrfx_glue.h +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_15_0/integration/nrfx/nrfx_glue.h @@ -54,9 +54,7 @@ extern "C" { * the needs of the host environment into which @em nrfx is integrated. */ -// RF - remove the legacy layer... this is preventing driver instances from being generated #include - #include //------------------------------------------------------------------------------ diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/common_rtc.c b/targets/TARGET_NORDIC/TARGET_NRF5x/common_rtc.c index 126c33f208..c5600ab5e5 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/common_rtc.c +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/common_rtc.c @@ -42,6 +42,7 @@ #include "nrf_drv_common.h" #include "lp_ticker_api.h" #include "mbed_critical.h" +#include "nrfx_glue.h" #if defined(NRF52_PAN_20) /* Macro for testing if the SoftDevice is active, regardless of whether the @@ -173,7 +174,8 @@ void common_rtc_init(void) nrf_rtc_int_disable(COMMON_RTC_INSTANCE, LP_TICKER_INT_MASK); #endif - nrf_drv_common_irq_enable(nrf_drv_get_IRQn(COMMON_RTC_INSTANCE), APP_IRQ_PRIORITY_HIGH); + NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number(COMMON_RTC_INSTANCE), APP_IRQ_PRIORITY_HIGH); + NRFX_IRQ_ENABLE(nrfx_get_irq_number(COMMON_RTC_INSTANCE)); nrf_rtc_task_trigger(COMMON_RTC_INSTANCE, NRF_RTC_TASK_START); diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/gpio_api.c b/targets/TARGET_NORDIC/TARGET_NRF5x/gpio_api.c index 0aa2504b0e..9addff70f5 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/gpio_api.c +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/gpio_api.c @@ -17,7 +17,7 @@ #include "gpio_api.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "nrf_drv_gpiote.h" +#include "nrfx_gpiote.h" #if defined(TARGET_MCU_NRF51822) @@ -58,7 +58,7 @@ static uint32_t m_channel_ids[GPIO_PIN_COUNT] = {0}; static gpio_mask_t m_gpio_irq_enabled; -static void gpiote_irq_handler(nrf_drv_gpiote_pin_t pin, nrf_gpiote_polarity_t action) +static void gpiote_irq_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { nrf_gpio_pin_sense_t sense = nrf_gpio_pin_sense_get(pin); gpio_irq_event event = (sense == NRF_GPIO_PIN_SENSE_LOW) ? IRQ_RISE : IRQ_FALL; @@ -83,7 +83,7 @@ void gpio_init(gpio_t *obj, PinName pin) NVIC_SetVector(GPIOTE_IRQn, (uint32_t) GPIOTE_IRQHandler); - (void) nrf_drv_gpiote_init(); + (void) nrfx_gpiote_init(); m_gpio_cfg[obj->pin].used_as_gpio = true; } @@ -110,9 +110,9 @@ static void gpiote_pin_uninit(uint8_t pin) { if (m_gpio_initialized & ((gpio_mask_t)1UL << pin)) { if ((m_gpio_cfg[pin].direction == PIN_OUTPUT) && (!m_gpio_cfg[pin].used_as_irq)) { - nrf_drv_gpiote_out_uninit(pin); + nrfx_gpiote_out_uninit(pin); } else if (m_gpio_cfg[pin].used_as_irq) { - nrf_drv_gpiote_in_uninit(pin); + nrfx_gpiote_in_uninit(pin); } } } @@ -123,7 +123,7 @@ static void gpio_apply_config(uint8_t pin) if ((m_gpio_cfg[pin].direction == PIN_INPUT) || (m_gpio_cfg[pin].used_as_irq)) { //Configure as input. - nrf_drv_gpiote_in_config_t cfg; + nrfx_gpiote_in_config_t cfg; cfg.hi_accuracy = false; cfg.is_watcher = false; @@ -140,18 +140,18 @@ static void gpio_apply_config(uint8_t pin) break; } if (m_gpio_cfg[pin].used_as_irq) { - nrf_drv_gpiote_in_init(pin, &cfg, gpiote_irq_handler); + nrfx_gpiote_in_init(pin, &cfg, gpiote_irq_handler); if ((m_gpio_irq_enabled & ((gpio_mask_t)1 << pin)) && (m_gpio_cfg[pin].irq_rise || m_gpio_cfg[pin].irq_fall)) { - nrf_drv_gpiote_in_event_enable(pin, true); + nrfx_gpiote_in_event_enable(pin, true); } } else { nrf_gpio_cfg_input(pin, cfg.pull); } } else { // Configure as output. - nrf_drv_gpiote_out_config_t cfg = GPIOTE_CONFIG_OUT_SIMPLE(nrf_gpio_pin_out_read(pin)); - nrf_drv_gpiote_out_init(pin, &cfg); + nrfx_gpiote_out_config_t cfg = NRFX_GPIOTE_CONFIG_OUT_SIMPLE(nrf_gpio_pin_out_read(pin)); + nrfx_gpiote_out_init(pin, &cfg); } m_gpio_initialized |= ((gpio_mask_t)1UL << pin); } else { @@ -192,7 +192,7 @@ int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32 return -1; } MBED_ASSERT((uint32_t)pin < GPIO_PIN_COUNT); - (void) nrf_drv_gpiote_init(); + (void) nrfx_gpiote_init(); gpiote_pin_uninit(pin); // try to uninitialize gpio before a change. @@ -210,7 +210,7 @@ int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32 void gpio_irq_free(gpio_irq_t *obj) { - nrf_drv_gpiote_in_uninit(obj->ch); + nrfx_gpiote_in_uninit(obj->ch); m_gpio_cfg[obj->ch].used_as_irq = false; m_channel_ids[obj->ch] = 0; @@ -247,7 +247,7 @@ void gpio_irq_enable(gpio_irq_t *obj) { m_gpio_irq_enabled |= ((gpio_mask_t)1 << obj->ch); if (m_gpio_cfg[obj->ch].irq_rise || m_gpio_cfg[obj->ch].irq_fall) { - nrf_drv_gpiote_in_event_enable(obj->ch, true); + nrfx_gpiote_in_event_enable(obj->ch, true); } } @@ -255,5 +255,5 @@ void gpio_irq_enable(gpio_irq_t *obj) void gpio_irq_disable(gpio_irq_t *obj) { m_gpio_irq_enabled &= ~((gpio_mask_t)1 << obj->ch); - nrf_drv_gpiote_in_event_disable(obj->ch); + nrfx_gpiote_in_event_disable(obj->ch); } diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/rtc_api.c b/targets/TARGET_NORDIC/TARGET_NRF5x/rtc_api.c index cc4d0f118f..104eebb13b 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/rtc_api.c +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/rtc_api.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (c) 2013 Nordic Semiconductor ASA * All rights reserved. * @@ -21,7 +21,7 @@ * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary or object form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. + * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED @@ -41,7 +41,7 @@ #if DEVICE_RTC #include "common_rtc.h" -#include "nrf_drv_clock.h" +#include "nrf_rtc.h" #include "app_util_platform.h" static time_t m_time_base; diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/us_ticker.c b/targets/TARGET_NORDIC/TARGET_NRF5x/us_ticker.c index 7ab6b2f610..9a8b8cb5e9 100644 --- a/targets/TARGET_NORDIC/TARGET_NRF5x/us_ticker.c +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/us_ticker.c @@ -43,6 +43,7 @@ #include "app_util_platform.h" #include "nrf_drv_common.h" #include "mbed_critical.h" +#include "nrfx_glue.h" bool us_ticker_initialized = false; @@ -89,7 +90,8 @@ void us_ticker_init(void) NVIC_SetVector(TIMER1_IRQn, (uint32_t)us_ticker_irq_handler); - nrf_drv_common_irq_enable(TIMER1_IRQn, APP_IRQ_PRIORITY_HIGH); + NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number((void const*)TIMER1_IRQn), APP_IRQ_PRIORITY_HIGH); + NRFX_IRQ_ENABLE(nrfx_get_irq_number((void const*)TIMER1_IRQn)); nrf_timer_task_trigger(NRF_TIMER1, NRF_TIMER_TASK_START); diff --git a/targets/targets.json b/targets/targets.json index 7be2424e73..d5d26e16cb 100644 --- a/targets/targets.json +++ b/targets/targets.json @@ -6939,6 +6939,7 @@ "PORTINOUT", "PORTOUT", "PWMOUT", + "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC",