ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

STM32L4 : common file factorisation

pull/13741/head
jeromecoutant 2020-10-07 10:55:23 +02:00
parent dcc066db59
commit 95f8b2dfd4
57 changed files with 386 additions and 3319 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

149
targets/TARGET_STM/TARGET_STM32L4/PeripheralNames.h Normal file
View File

@ -0,0 +1,149 @@
/* mbed Microcontroller Library
* Copyright (c) 2016-2020 STMicroelectronics
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
#if defined ADC2_BASE
ADC_2 = (int)ADC2_BASE,
#endif
#if defined ADC3_BASE
ADC_3 = (int)ADC3_BASE,
#endif
} ADCName;
#if defined DAC_BASE
typedef enum {
DAC_1 = (int)DAC_BASE,
} DACName;
#endif
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
#if defined USART3_BASE
UART_3 = (int)USART3_BASE,
#endif
#if defined UART4_BASE
UART_4 = (int)UART4_BASE,
#endif
#if defined UART5_BASE
UART_5 = (int)UART5_BASE,
#endif
LPUART_1 = (int)LPUART1_BASE,
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
#if defined SPI2_BASE
SPI_2 = (int)SPI2_BASE,
#endif
#if defined SPI3_BASE
SPI_3 = (int)SPI3_BASE,
#endif
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
#if defined I2C2_BASE
I2C_2 = (int)I2C2_BASE,
#endif
I2C_3 = (int)I2C3_BASE,
#if defined I2C4_BASE
I2C_4 = (int)I2C4_BASE,
#endif
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
#if defined TIM3_BASE
PWM_3 = (int)TIM3_BASE,
#endif
#if defined TIM4_BASE
PWM_4 = (int)TIM4_BASE,
#endif
#if defined TIM5_BASE
PWM_5 = (int)TIM5_BASE,
#endif
#if defined TIM8_BASE
PWM_8 = (int)TIM8_BASE,
#endif
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
#if defined TIM17_BASE
PWM_17 = (int)TIM17_BASE,
#endif
} PWMName;
#if defined CAN1_BASE
typedef enum {
CAN_1 = (int)CAN1_BASE,
#if defined CAN2_BASE
CAN_2 = (int)CAN2_BASE,
#endif
} CANName;
#endif
#if defined QSPI_R_BASE || defined OCTOSPI1_R_BASE
typedef enum {
#if defined QSPI_R_BASE
QSPI_1 = (int)QSPI_R_BASE,
#endif
#if defined OCTOSPI1_R_BASE
QSPI_1 = (int)OCTOSPI1_R_BASE,
#endif
#if defined OCTOSPI2_R_BASE
QSPI_2 = (int)OCTOSPI2_R_BASE,
#endif
} QSPIName;
#endif
#if defined OCTOSPI1_R_BASE
typedef enum {
OSPI_1 = (int)OCTOSPI1_R_BASE,
#if defined OCTOSPI2_R_BASE
OSPI_2 = (int)OCTOSPI2_R_BASE,
#endif
} OSPIName;
#endif
#if defined USB_OTG_FS_PERIPH_BASE || defined USB_BASE
typedef enum {
#if defined USB_OTG_FS_PERIPH_BASE
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
#endif
#if defined USB_BASE
USB_FS = (int)USB_BASE,
#endif
} USBName;
#endif
#ifdef __cplusplus
}
#endif
#endif

87
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/PeripheralNames.h
View File

@ -1,87 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 2
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE,
} QSPIName;
typedef enum {
USB_FS = (int)USB_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

9
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/system_clock.c
View File

@ -46,13 +46,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -123,7 +116,7 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM2
#define TIM_MST_IRQ TIM2_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM2_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM2()
#define TIM_MST_RESET_ON __HAL_RCC_TIM2_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM2_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

92
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L433xC/PeripheralNames.h
View File

@ -1,92 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_6 = (int)TIM6_BASE,
PWM_7 = (int)TIM7_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE,
} QSPIName;
typedef enum {
USB_FS = (int)USB_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L433xC/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

9
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L433xC/system_clock.c
View File

@ -46,13 +46,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -123,7 +116,7 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};

84
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L443xC/PeripheralNames.h
View File

@ -1,84 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_6 = (int)TIM6_BASE,
PWM_7 = (int)TIM7_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
#ifdef __cplusplus
}
#endif
#endif

65
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L443xC/cmsis_nvic.h
View File

@ -1,40 +1,47 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
* @attention
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* <h2><center>&copy; Copyright (c) 2016-2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
******************************************************************************
*/
#ifndef MBED_CMSIS_NVIC_H
#define MBED_CMSIS_NVIC_H
// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
// MCU Peripherals: 83 vectors = 332 bytes from 0x40 to 0x18B
// Total: 99 vectors = 396 bytes (0x18C) to be reserved in RAM
#if !defined(MBED_ROM_START)
#define MBED_ROM_START 0x8000000
#endif
#if !defined(MBED_ROM_SIZE)
#define MBED_ROM_SIZE 0x40000 // 256 KB
#endif
#if !defined(MBED_RAM_START)
#define MBED_RAM_START 0x20000000
#endif
#if !defined(MBED_RAM_SIZE)
#define MBED_RAM_SIZE 0xc000 // 48 KB
#endif
#if !defined(MBED_RAM1_START)
#define MBED_RAM1_START 0x10000000
#endif
#if !defined(MBED_RAM1_SIZE)
#define MBED_RAM1_SIZE 0x4000 // 16 KB
#endif
#define NVIC_NUM_VECTORS 99
#define NVIC_RAM_VECTOR_ADDRESS SRAM2_BASE // Vectors positioned at start of SRAM1
#define NVIC_RAM_VECTOR_ADDRESS MBED_RAM_START
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L443xC/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

9
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L443xC/system_clock.c
View File

@ -46,13 +46,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -123,7 +116,7 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L443xC/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM2
#define TIM_MST_IRQ TIM2_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM2_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM2()
#define TIM_MST_RESET_ON __HAL_RCC_TIM2_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM2_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

95
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L452xE/PeripheralNames.h
View File

@ -1,95 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE,
I2C_4 = (int)I2C4_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE, // TIM2 used by usticker
PWM_3 = (int)TIM3_BASE,
PWM_6 = (int)TIM6_BASE,
// PWM_7 = (int)TIM7_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE,
} QSPIName;
typedef enum {
USB_FS = (int)USB_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L452xE/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

44
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L452xE/system_clock.c
View File

@ -26,7 +26,7 @@
*
* This file configures the system clock as follows:
*=============================================================================
* System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
* System clock source s | 1- PLL_HSE_EXTC | 3- PLL_HSI
* | (external 8 MHz clock) | (internal 16 MHz)
* | 2- PLL_HSE_XTAL | or PLL_MSI
* | (external 8 MHz xtal) | (internal 4 MHz)
@ -46,13 +46,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -123,30 +116,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -184,12 +166,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
@ -213,14 +189,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -259,12 +229,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L452xE/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM2
#define TIM_MST_IRQ TIM2_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM2_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM2()
#define TIM_MST_RESET_ON __HAL_RCC_TIM2_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM2_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

95
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L471xG/PeripheralNames.h
View File

@ -1,95 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define STDIO_UART_TX PB_6
#define STDIO_UART_RX PB_7
#define STDIO_UART UART_1
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
#ifdef __cplusplus
}
#endif
#endif

2
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L471xG/TARGET_MTS_DRAGONFLY_L471QG/PinNames.h
View File

@ -217,6 +217,8 @@ typedef enum {
// 40 pin USB debug port
USBTX = PB_6,
USBRX = PB_7,
STDIO_UART_TX = PB_6,
STDIO_UART_RX = PB_7,
//UARTS
UART3_TX = PD_2,

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L471xG/TARGET_MTS_DRAGONFLY_L471QG/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L471xG/TARGET_MTS_DRAGONFLY_L471QG/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#define HAL_TICK_DELAY (1000) // 1 ms
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

65
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L471xG/cmsis_nvic.h
View File

@ -1,40 +1,47 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
* @attention
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* <h2><center>&copy; Copyright (c) 2016-2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
******************************************************************************
*/
#ifndef MBED_CMSIS_NVIC_H
#define MBED_CMSIS_NVIC_H
// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
// MCU Peripherals: 82 vectors = 328 bytes from 0x40 to 0x187
// Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
#if !defined(MBED_ROM_START)
#define MBED_ROM_START 0x8000000
#endif
#if !defined(MBED_ROM_SIZE)
#define MBED_ROM_SIZE 0x100000 // 1.0 MB
#endif
#if !defined(MBED_RAM_START)
#define MBED_RAM_START 0x20000000
#endif
#if !defined(MBED_RAM_SIZE)
#define MBED_RAM_SIZE 0x18000 // 96 KB
#endif
#if !defined(MBED_RAM1_START)
#define MBED_RAM1_START 0x10000000
#endif
#if !defined(MBED_RAM1_SIZE)
#define MBED_RAM1_SIZE 0x8000 // 32 KB
#endif
#define NVIC_NUM_VECTORS 98
#define NVIC_RAM_VECTOR_ADDRESS 0x10000000 // Vectors positioned at start of SRAM2
#define NVIC_RAM_VECTOR_ADDRESS MBED_RAM1_START
#endif

81
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L471xG/system_clock.c
View File

@ -32,14 +32,7 @@
**/
#include "stm32l4xx.h"
#include "mbed_assert.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#include "mbed_error.h"
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
@ -85,7 +78,7 @@ void SetSysClock(void)
{
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/* 3- If fail start with HSI clock */
if (SetSysClock_PLL_HSI()==0)
if (SetSysClock_PLL_HSI() == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
@ -93,8 +86,8 @@ void SetSysClock(void)
if (SetSysClock_PLL_MSI() == 0)
#endif
{
while(1) {
MBED_ASSERT(1);
{
error("SetSysClock failed\n");
}
}
}
@ -111,30 +104,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -157,6 +139,7 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
@ -169,19 +152,15 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0)
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
else
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
if (bypass == 0) {
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
} else {
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
}
#endif
return 1; // OK
@ -198,14 +177,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -229,6 +202,7 @@ uint8_t SetSysClock_PLL_HSI(void)
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
@ -241,12 +215,7 @@ uint8_t SetSysClock_PLL_HSI(void)
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
@ -267,15 +236,19 @@ uint8_t SetSysClock_PLL_MSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
#if MBED_CONF_TARGET_LSE_AVAILABLE
// Enable LSE Oscillator to automatically calibrate the MSI clock
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
RCC->CR |= RCC_CR_MSIPLLEN; // Enable MSI PLL-mode
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
/* Enable the CSS interrupt in case LSE signal is corrupted or not present */
HAL_RCCEx_DisableLSECSS();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
/* Enable MSI Oscillator and activate PLL with MSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
@ -294,8 +267,18 @@ uint8_t SetSysClock_PLL_MSI(void)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
#if MBED_CONF_TARGET_LSE_AVAILABLE
/* Enable MSI Auto-calibration through LSE */
HAL_RCCEx_EnableMSIPLLMode();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
#if DEVICE_USBDEVICE
/* Select MSI output as USB clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
#endif /* DEVICE_USBDEVICE */
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);

99
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/PeripheralNames.h
View File

@ -1,99 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2017, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE,
} QSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2017, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

42
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/system_clock.c
View File

@ -34,13 +34,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -111,30 +104,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -172,12 +154,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
@ -201,14 +177,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -247,12 +217,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

99
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/PeripheralNames.h
View File

@ -1,99 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE
} QSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

307
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/system_clock.c
View File

@ -1,307 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2017 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* This file configures the system clock as follows:
*-----------------------------------------------------------------------------
* System clock source | 1- USE_PLL_HSE_EXTC (external 8 MHz clock)
* | 2- USE_PLL_HSE_XTAL (external 8 MHz xtal)
* | 3- USE_PLL_HSI (internal 16 MHz)
* | 4- USE_PLL_MSI (internal 100kHz to 48 MHz)
*-----------------------------------------------------------------------------
* SYSCLK(MHz) | 80
* AHBCLK (MHz) | 80
* APB1CLK (MHz) | 80
* APB2CLK (MHz) | 80
* USB capable | YES
*-----------------------------------------------------------------------------
**/
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
#define USE_PLL_HSI 0x2 // Use HSI internal clock
#define USE_PLL_MSI 0x1 // Use MSI internal clock
#define DEBUG_MCO (0) // Output the MCO on PA8 for debugging (0=OFF, 1=SYSCLK, 2=HSE, 3=HSI, 4=MSI)
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
uint8_t SetSysClock_PLL_HSI(void);
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
uint8_t SetSysClock_PLL_MSI(void);
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */
/**
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
* AHB/APBx prescalers and Flash settings
* @note This function should be called only once the RCC clock configuration
* is reset to the default reset state (done in SystemInit() function).
* @param None
* @retval None
*/
void SetSysClock(void)
{
#if ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC)
/* 1- Try to start with HSE and external clock */
if (SetSysClock_PLL_HSE(1) == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL)
/* 2- If fail try to start with HSE and external xtal */
if (SetSysClock_PLL_HSE(0) == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/* 3- If fail start with HSI clock */
if (SetSysClock_PLL_HSI() == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
/* 4- If fail start with MSI clock */
if (SetSysClock_PLL_MSI() == 0)
#endif
{
{
error("SetSysClock failed\n");
}
}
}
}
}
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 1
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
#endif
}
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7)
RCC_OscInitStruct.PLL.PLLQ = 2;
RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
// Select PLL clock as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz or 48 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz or 48 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1M = 1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
} else {
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
}
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/******************************************************************************/
/* PLL (clocked by HSI) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; // 16 MHz
RCC_OscInitStruct.PLL.PLLM = 2; // VCO input clock = 8 MHz (16 MHz / 2)
RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7)
RCC_OscInitStruct.PLL.PLLQ = 2;
RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1M = 2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
/******************************************************************************/
/* PLL (clocked by MSI) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_MSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
#if MBED_CONF_TARGET_LSE_AVAILABLE
// Enable LSE Oscillator to automatically calibrate the MSI clock
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
/* Enable the CSS interrupt in case LSE signal is corrupted or not present */
HAL_RCCEx_DisableLSECSS();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
/* Enable MSI Oscillator and activate PLL with MSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; /* 48 MHz */
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
RCC_OscInitStruct.PLL.PLLM = 6; /* 8 MHz */
RCC_OscInitStruct.PLL.PLLN = 40; /* 320 MHz */
RCC_OscInitStruct.PLL.PLLP = 7; /* 45 MHz */
RCC_OscInitStruct.PLL.PLLQ = 4; /* 80 MHz */
RCC_OscInitStruct.PLL.PLLR = 4; /* 80 MHz */
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
#if MBED_CONF_TARGET_LSE_AVAILABLE
/* Enable MSI Auto-calibration through LSE */
HAL_RCCEx_EnableMSIPLLMode();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
#if DEVICE_USBDEVICE
/* Select MSI output as USB clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
#endif /* DEVICE_USBDEVICE */
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; /* 80 MHz */
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 4
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_2); // 2 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

42
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/system_clock.c
View File

@ -34,13 +34,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -111,30 +104,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -172,12 +154,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
@ -201,14 +177,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -247,12 +217,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

91
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/TARGET_ADV_WISE_1570/PeripheralNames.h
View File

@ -1,91 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
#ifdef __cplusplus
}
#endif
#endif

52
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/TARGET_ADV_WISE_1570/system_clock.c
View File

@ -34,13 +34,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -111,32 +104,20 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
//RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_LSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -159,7 +140,7 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
return 0; // FAIL
}
#if 0
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
@ -172,7 +153,7 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif
#endif /* DEVICE_USBDEVICE */
// Select LSE output as LPUART1 clock source
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_LPUART1;
@ -182,12 +163,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
@ -211,14 +186,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -242,6 +211,7 @@ uint8_t SetSysClock_PLL_HSI(void)
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
@ -254,12 +224,7 @@ uint8_t SetSysClock_PLL_HSI(void)
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
@ -317,10 +282,13 @@ uint8_t SetSysClock_PLL_MSI(void)
HAL_RCCEx_EnableMSIPLLMode();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
#if DEVICE_USBDEVICE
/* Select MSI output as USB clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
#endif /* DEVICE_USBDEVICE */
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; /* 80 MHz */

99
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/TARGET_NUCLEO_L486RG/PeripheralNames.h
View File

@ -1,99 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE
} QSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

42
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/TARGET_NUCLEO_L486RG/system_clock.c
View File

@ -34,13 +34,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -111,30 +104,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -172,12 +154,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
@ -201,14 +177,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -247,12 +217,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

46
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/us_ticker_data.h
View File

@ -1,46 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

101
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/PeripheralNames.h
View File

@ -1,101 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2017, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE,
I2C_4 = (int)I2C4_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE,
CAN_2 = (int)CAN2_BASE
} CANName;
typedef enum {
QSPI_1 = (int)QSPI_R_BASE
} QSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

44
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/system_clock.c
View File

@ -34,13 +34,6 @@
#include "stm32l4xx.h"
#include "mbed_error.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
@ -111,30 +104,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -151,7 +133,7 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
@ -172,12 +154,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/* Select HSI as clock source for LPUART1 */
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
RCC_PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_HSI;
@ -208,14 +184,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -254,12 +224,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/* Select HSI as clock source for LPUART1 */
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
RCC_PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_HSI;

45
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/us_ticker_data.h
View File

@ -1,45 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

99
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R5xI/PeripheralNames.h
View File

@ -1,99 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2018, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE,
I2C_4 = (int)I2C4_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)OCTOSPI1_R_BASE,
QSPI_2 = (int)OCTOSPI2_R_BASE
} QSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

54
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R5xI/objects.h
View File

@ -1,54 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

52
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R5xI/system_clock.c
View File

@ -33,7 +33,7 @@
**/
#include "stm32l4xx.h"
#include "mbed_assert.h"
#include "mbed_error.h"
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
@ -84,8 +84,8 @@ void SetSysClock(void)
if (SetSysClock_PLL_MSI() == 0)
#endif
{
while (1) {
MBED_ASSERT(1);
{
error("SetSysClock failed\n");
}
}
}
@ -97,30 +97,19 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -158,12 +147,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
@ -178,14 +161,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -224,12 +201,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
@ -244,15 +215,19 @@ uint8_t SetSysClock_PLL_MSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
#if MBED_CONF_TARGET_LSE_AVAILABLE
// Enable LSE Oscillator to automatically calibrate the MSI clock
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
RCC->CR |= RCC_CR_MSIPLLEN; // Enable MSI PLL-mode
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
/* Enable the CSS interrupt in case LSE signal is corrupted or not present */
HAL_RCCEx_DisableLSECSS();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
/* Enable MSI Oscillator and activate PLL with MSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
@ -270,8 +245,11 @@ uint8_t SetSysClock_PLL_MSI(void)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
#if MBED_CONF_TARGET_LSE_AVAILABLE
/* Enable MSI Auto-calibration through LSE */
HAL_RCCEx_EnableMSIPLLMode();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
#if DEVICE_USBDEVICE
/* Select MSI output as USB clock source */

44
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R5xI/us_ticker_data.h
View File

@ -1,44 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

104
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R9xI/PeripheralNames.h
View File

@ -1,104 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2018, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE,
I2C_4 = (int)I2C4_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)OCTOSPI1_R_BASE,
QSPI_2 = (int)OCTOSPI2_R_BASE
} QSPIName;
typedef enum {
OSPI_1 = (int)OCTOSPI1_R_BASE,
OSPI_2 = (int)OCTOSPI2_R_BASE
} OSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

67
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R9xI/objects.h
View File

@ -1,67 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2019, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

45
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R9xI/system_clock.c
View File

@ -33,7 +33,7 @@
**/
#include "stm32l4xx.h"
#include "mbed_assert.h"
#include "mbed_error.h"
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
@ -84,8 +84,8 @@ void SetSysClock(void)
if (SetSysClock_PLL_MSI() == 0)
#endif
{
while (1) {
MBED_ASSERT(1);
{
error("SetSysClock failed\n");
}
}
}
@ -97,24 +97,23 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK) {
return 0; // FAIL
}
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI48;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 16 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 16 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
#if DEVICE_USBDEVICE
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
#else
@ -133,9 +132,9 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#if DEVICE_USBDEVICE
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; /* 48 MHz */
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkIniRCC_PeriphClkInittStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; /* 48 MHz */
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif /* DEVICE_USBDEVICE */
@ -162,18 +161,10 @@ uint8_t SetSysClock_PLL_HSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) {
return 0; // FAIL
}
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
#if DEVICE_USBDEVICE
@ -193,9 +184,9 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#if DEVICE_USBDEVICE
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; /* 48 MHz */
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; /* 48 MHz */
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif /* DEVICE_USBDEVICE */
@ -210,14 +201,6 @@ uint8_t SetSysClock_PLL_HSI(void)
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */

44
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4R9xI/us_ticker_data.h
View File

@ -1,44 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

86
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4S5xI/PeripheralNames.h
View File

@ -1,86 +0,0 @@
/* mbed Microcontroller Library
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2016-2020 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*
*
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE,
I2C_4 = (int)I2C4_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
typedef enum {
QSPI_1 = (int)OCTOSPI1_R_BASE,
QSPI_2 = (int)OCTOSPI2_R_BASE
} QSPIName;
typedef enum {
USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
} USBName;
#ifdef __cplusplus
}
#endif
#endif

53
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4S5xI/objects.h
View File

@ -1,53 +0,0 @@
/* mbed Microcontroller Library
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2016-2020 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

41
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4S5xI/system_clock.c
View File

@ -31,7 +31,7 @@
**/
#include "stm32l4xx.h"
#include "mbed_assert.h"
#include "mbed_error.h"
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
@ -82,8 +82,8 @@ void SetSysClock(void)
if (SetSysClock_PLL_MSI() == 0)
#endif
{
while (1) {
MBED_ASSERT(1);
{
error("SetSysClock failed\n");
}
}
}
@ -95,30 +95,23 @@ void SetSysClock(void)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK) {
return 0; // FAIL
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
@ -156,12 +149,6 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
@ -176,14 +163,8 @@ uint8_t SetSysClock_PLL_HSI(void)
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@ -222,12 +203,6 @@ uint8_t SetSysClock_PLL_HSI(void)
}
#endif /* DEVICE_USBDEVICE */
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */

42
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L4S5xI/us_ticker_data.h
View File

@ -1,42 +0,0 @@
/* mbed Microcontroller Library
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2017-2020 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

78
targets/TARGET_STM/TARGET_STM32L4/common_objects.h → targets/TARGET_STM/TARGET_STM32L4/objects.h
View File

@ -1,39 +1,29 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
* Copyright (c) 2016-2020 STMicroelectronics
* SPDX-License-Identifier: Apache-2.0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* http://www.apache.org/licenses/LICENSE-2.0
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_COMMON_OBJECTS_H
#define MBED_COMMON_OBJECTS_H
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#include "gpio_object.h"
#include "stm32l4xx_ll_usart.h"
#include "stm32l4xx_ll_lpuart.h"
#include "stm32l4xx_ll_tim.h"
@ -44,6 +34,14 @@
extern "C" {
#endif
#if DEVICE_ANALOGOUT
struct dac_s {
DACName dac;
PinName pin;
uint32_t channel;
DAC_HandleTypeDef handle;
};
#endif
struct pwmout_s {
PWMName pwm;
@ -130,18 +128,24 @@ struct analogin_s {
uint8_t channel;
};
#include "gpio_object.h"
struct dac_s {
DACName dac;
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
uint32_t channel;
DAC_HandleTypeDef handle;
};
#ifdef __cplusplus
}
#endif
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct trng_s {
RNG_HandleTypeDef handle;
};
#if DEVICE_CAN
struct can_s {
@ -188,4 +192,8 @@ struct ospi_s {
#define HAL_CRC_IS_SUPPORTED(polynomial, width) ((width) == 7 || (width) == 8 || (width) == 16 || (width) == 32)
#ifdef __cplusplus
}
#endif
#endif

5
targets/TARGET_STM/TARGET_STM32L4/spi_api.c
View File

@ -60,11 +60,16 @@ int spi_get_clock_freq(spi_t *obj)
break;
#if defined(SPI2_BASE)
case SPI_2:
/* SPI_2, SPI_3. Source CLK is PCKL1 */
spi_hz = HAL_RCC_GetPCLK1Freq();
break;
#endif
#if defined(SPI3_BASE)
case SPI_3:
/* SPI_2, SPI_3. Source CLK is PCKL1 */
spi_hz = HAL_RCC_GetPCLK1Freq();
break;
#endif
default:
error("CLK: SPI instance not set");
break;

17
targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L433xC/us_ticker_data.h → targets/TARGET_STM/TARGET_STM32L4/us_ticker_data.h
View File

@ -1,5 +1,5 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
* Copyright (c) 2016-2020 STMicroelectronics
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
@ -14,6 +14,7 @@
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
@ -25,6 +26,18 @@
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#if defined TIM5_BASE
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#else
#define TIM_MST TIM2
#define TIM_MST_IRQ TIM2_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM2_CLK_ENABLE()
@ -33,6 +46,8 @@
#define TIM_MST_RESET_ON __HAL_RCC_TIM2_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM2_RELEASE_RESET()
#endif
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)