mirror of https://github.com/ARMmbed/mbed-os.git
STM32 : genpinmap script version 1.1
jeromecoutant
parent
5a76718ae8
commit
959ecf9bdc
|
|
@ -9,7 +9,7 @@ import textwrap
|
|||
from xml.dom.minidom import parse, Node
|
||||
from argparse import RawTextHelpFormatter
|
||||
|
||||
GENPINMAP_VERSION = "1.0"
|
||||
GENPINMAP_VERSION = "1.1"
|
||||
|
||||
ADD_DEVICE_IFDEF = 0
|
||||
ADD_QSPI_FEATURE = 0
|
||||
|
|
@ -189,8 +189,17 @@ def get_gpio_af_numF1(pintofind, iptofind):
|
|||
if mygpioaf == 'NOTFOUND':
|
||||
print ('GPIO AF not found in ' + gpiofile + ' for ' + pintofind + ' and the IP ' + iptofind + ' set as AFIO_NONE')
|
||||
mygpioaf = 'AFIO_NONE'
|
||||
return mygpioaf.replace('NOTFOUND ', '')
|
||||
|
||||
return mygpioaf.replace('NOTFOUND ', '')\
|
||||
.replace("AFIO_NONE", "0")\
|
||||
.replace("AFIO_SPI1_ENABLE", "1")\
|
||||
.replace("AFIO_I2C1_ENABLE", "2")\
|
||||
.replace("AFIO_USART1_ENABLE", "3")\
|
||||
.replace("AFIO_USART3_PARTIAL", "5")\
|
||||
.replace("AFIO_TIM1_PARTIAL", "6")\
|
||||
.replace("AFIO_TIM3_PARTIAL", "7")\
|
||||
.replace("AFIO_TIM2_ENABLE", "8")\
|
||||
.replace("AFIO_TIM3_ENABLE", "9")\
|
||||
.replace("AFIO_CAN1_2", "10")
|
||||
|
||||
#function to store I/O pin
|
||||
def store_pin (pin, name):
|
||||
|
|
@ -312,7 +321,7 @@ def print_header():
|
|||
//==============================================================================
|
||||
// Notes
|
||||
//
|
||||
// - The pins mentionned Px_y_ALTz are alternative possibilities which use other
|
||||
// - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||
// HW peripheral instances. You can use them the same way as any other "normal"
|
||||
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
|
||||
// pinout image on mbed.org.
|
||||
|
|
@ -465,9 +474,9 @@ def print_list_header(comment, name, l, switch):
|
|||
|
||||
s += "MBED_WEAK const PinMap PinMap_%s[] = {\n" % name
|
||||
|
||||
else:
|
||||
if comment:
|
||||
s += "\n//*** No %s ***\n" % comment
|
||||
# else:
|
||||
# if comment:
|
||||
# s += "\n//*** No %s ***\n" % comment
|
||||
|
||||
out_c_file.write(s)
|
||||
return len(l)
|
||||
|
|
@ -482,7 +491,7 @@ def print_adc():
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if CommentedLine != "//":
|
||||
if p[0] == prev_p:
|
||||
|
|
@ -525,7 +534,7 @@ def print_dac():
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
s1 = "%-17s" % (CommentedLine + " {" + p[0] + ',')
|
||||
#p[2] : DAC_OUT1 / DAC1_OUT1
|
||||
|
|
@ -556,7 +565,7 @@ def print_i2c(l):
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if CommentedLine != "//":
|
||||
if p[0] == prev_p:
|
||||
|
|
@ -601,7 +610,7 @@ def print_pwm():
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "%s_" % TIM_MST in p[2]:
|
||||
CommentedLine = "//"
|
||||
|
|
@ -648,7 +657,7 @@ def print_uart(l):
|
|||
if result != 'NOTFOUND':
|
||||
CommentedLine = " "
|
||||
if p[1] in PinLabel.keys():
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if CommentedLine != "//":
|
||||
if p[0] == prev_p:
|
||||
|
|
@ -691,7 +700,7 @@ def print_spi(l):
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if CommentedLine != "//":
|
||||
if p[0] == prev_p:
|
||||
|
|
@ -727,7 +736,7 @@ def print_can(l):
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
s1 = "%-17s" % (CommentedLine + " {" + p[0] + ',')
|
||||
# p[2] : CAN_RX / CAN1_RX
|
||||
|
|
@ -762,7 +771,7 @@ def print_qspi(l):
|
|||
if p[1] in PinLabel.keys():
|
||||
if "STDIO_UART" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
if "RCC_OSC" in PinLabel[p[1]] or "SWCLK" in PinLabel[p[1]]:
|
||||
if "RCC_OSC" in PinLabel[p[1]]:
|
||||
CommentedLine = "//"
|
||||
s1 = "%-17s" % (CommentedLine + " {" + p[0] + ',')
|
||||
# p[2] : QUADSPI_BK1_IO3 / QUADSPI_CLK / QUADSPI_NCS
|
||||
|
|
@ -806,9 +815,9 @@ def print_h_file(l, comment):
|
|||
alt_index = 0
|
||||
s1 = " %s = %s,\n" % (p[2].replace("-", "_"), p[0])
|
||||
out_h_file.write(s1)
|
||||
else:
|
||||
s = ("\n/**** No %s pins ***/\n" % comment)
|
||||
out_h_file.write(s)
|
||||
# else:
|
||||
# s = ("\n/**** No %s pins ***/\n" % comment)
|
||||
# out_h_file.write(s)
|
||||
|
||||
|
||||
tokenize = re.compile(r'(\d+)|(\D+)').findall
|
||||
|
|
@ -954,10 +963,11 @@ def parse_BoardFile(fileName):
|
|||
try:
|
||||
PinLabel[EachPin] = PinData[EachPin]["GPIO_Label"]
|
||||
|
||||
if "STLK_RX" in PinLabel[EachPin]:
|
||||
PinLabel[EachPin] = "STDIO_UART_RX"
|
||||
elif "STLK_TX" in PinLabel[EachPin]:
|
||||
PinLabel[EachPin] = "STDIO_UART_TX"
|
||||
if "STLK_RX" in PinLabel[EachPin] or "STLK_TX" in PinLabel[EachPin]:
|
||||
if "RX" in PinData[EachPin]["Signal"]:
|
||||
PinLabel[EachPin] = "STDIO_UART_RX"
|
||||
else:
|
||||
PinLabel[EachPin] = "STDIO_UART_TX"
|
||||
elif "USART_RX" in PinLabel[EachPin]:
|
||||
PinLabel[EachPin] = "STDIO_UART_RX"
|
||||
elif "USART_TX" in PinLabel[EachPin]:
|
||||
|
|
@ -974,10 +984,11 @@ def parse_BoardFile(fileName):
|
|||
PinLabel[EachPin] = "STDIO_UART_RX"
|
||||
elif "USART2_TX" in PinLabel[EachPin]:
|
||||
PinLabel[EachPin] = "STDIO_UART_TX"
|
||||
elif "STLINK_RX" in PinLabel[EachPin]:
|
||||
PinLabel[EachPin] = "STDIO_UART_RX"
|
||||
elif "STLINK_TX" in PinLabel[EachPin]:
|
||||
PinLabel[EachPin] = "STDIO_UART_TX"
|
||||
elif "STLINK_RX" in PinLabel[EachPin] or "STLINK_TX" in PinLabel[EachPin]:
|
||||
if "RX" in PinData[EachPin]["Signal"]:
|
||||
PinLabel[EachPin] = "STDIO_UART_RX"
|
||||
else:
|
||||
PinLabel[EachPin] = "STDIO_UART_TX"
|
||||
except:
|
||||
pass
|
||||
|
||||
|
|
@ -1126,7 +1137,7 @@ if args.target:
|
|||
for mcu_file in mcu_list:
|
||||
if args.mcu:
|
||||
TargetName = os.path.splitext(mcu_file)[0]
|
||||
out_path = os.path.join(cur_dir, 'TARGET_%s' % TargetName)
|
||||
out_path = os.path.join(cur_dir, '%s' % TargetName)
|
||||
print(" * Output directory: %s" % (out_path))
|
||||
print(" * Generating %s and %s with '%s'" % (PeripheralPins_c_filename, PinNames_h_filename, mcu_file))
|
||||
input_file_name = os.path.join(cubemxdirMCU, mcu_file)
|
||||
|
|
@ -1142,7 +1153,36 @@ for mcu_file in mcu_list:
|
|||
out_h_file = open(output_hfilename, 'w')
|
||||
|
||||
#open input file
|
||||
xml_mcu = parse(input_file_name)
|
||||
try:
|
||||
xml_mcu = parse(input_file_name)
|
||||
except:
|
||||
# Patch waiting for CubeMX correction
|
||||
if "STM32F042K6Tx" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32F042K(4-6)Tx.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
elif "STM32F429Z" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32F429ZITx.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
elif "STM32F746Z" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32F746ZGTx.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
elif "STM32F767Z" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32F767ZGTx.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
|
||||
elif "STM32L011K4Tx" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32L011K(3-4)Tx.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
elif "STM32L432KCUx" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32L432K(B-C)Ux.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
elif "STM32F746N" in input_file_name:
|
||||
input_file_name = os.path.join(cubemxdirMCU, "STM32F746NGHx.xml")
|
||||
xml_mcu = parse(input_file_name)
|
||||
else:
|
||||
print ("\n ! ! ! Error in CubeMX file. File " + input_file_name + " doesn't exist")
|
||||
print (" ! ! ! Check in " + cubemxdirMCU)
|
||||
quit()
|
||||
gpiofile = find_gpio_file()
|
||||
if gpiofile == 'ERROR':
|
||||
print("Could not find GPIO file")
|
||||
|
|
|
|||
Loading…
Reference in New Issue