ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Remove NZ32_SC151 target

pull/12810/head
MarceloSalazar 2020-04-15 17:30:21 +01:00 committed by Marcelo Salazar
parent d9cb51dbc6
commit 93db82f591
18 changed files with 0 additions and 11723 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PeripheralNames.h
View File

@ -1,96 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE
} UARTName;
#if (MX_DEFAULT_SERIAL_PINS == 0)
//Use B10/B11 as default serial port
#define STDIO_UART_TX PB_10
#define STDIO_UART_RX PB_11
#define STDIO_UART UART_3
#elif (MX_DEFAULT_SERIAL_PINS == 1)
//Use A2/A3 as default serial port
#define STDIO_UART_TX PA_2
#define STDIO_UART_RX PA_3
#define STDIO_UART UART_2
#else
//Use A2/A3 as default serial port
#define STDIO_UART_TX PA_2
#define STDIO_UART_RX PA_3
#define STDIO_UART UART_2
#endif
#define DEVICE_SPI_COUNT 3
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE
} I2CName;
typedef enum {
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_9 = (int)TIM9_BASE,
PWM_10 = (int)TIM10_BASE,
PWM_11 = (int)TIM11_BASE
} PWMName;
#ifdef __cplusplus
}
#endif
#endif

198
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PeripheralPins.c
View File

@ -1,198 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "PeripheralPins.h"
// =====
// Note: Commented lines are alternative possibilities which are not used per default.
// If you change them, you will have also to modify the corresponding xxx_api.c file
// for pwmout, analogin, analogout, ...
// =====
//*** ADC ***
const PinMap PinMap_ADC[] = {
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
{PB_12, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18
{PB_13, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC_IN19
{PB_14, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 20, 0)}, // ADC_IN20
{PB_15, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 21, 0)}, // ADC_IN21
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15
{NC, NC, 0}
};
const PinMap PinMap_ADC_Internal[] = {
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
{NC, NC, 0}
};
//*** DAC ***
const PinMap PinMap_DAC[] = {
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 (Warning: LED1 is also on this pin)
{NC, NC, 0}
};
//*** I2C ***
const PinMap PinMap_I2C_SDA[] = {
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{NC, NC, 0}
};
const PinMap PinMap_I2C_SCL[] = {
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{NC, NC, 0}
};
//*** PWM ***
// TIM5 cannot be used because already used by the us_ticker.
const PinMap PinMap_PWM[] = {
// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
// {PA_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
{PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
// {PA_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
{PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
{PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
{PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
{PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
{PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
// {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
{PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
// {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
{PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
{PB_12, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
{PB_13, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
{PB_14, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
{PB_15, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{NC, NC, 0}
};
//*** SERIAL ***
const PinMap PinMap_UART_TX[] = {
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
// {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
{NC, NC, 0}
};
const PinMap PinMap_UART_RX[] = {
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
// {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
{NC, NC, 0}
};
//*** SPI ***
const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{NC, NC, 0}
};

146
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PinNames.h
View File

@ -1,146 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
PA_2 = 0x02,
PA_3 = 0x03,
PA_4 = 0x04,
PA_5 = 0x05,
PA_6 = 0x06,
PA_7 = 0x07,
PA_8 = 0x08,
PA_9 = 0x09,
PA_10 = 0x0A,
PA_11 = 0x0B,
PA_12 = 0x0C,
PA_13 = 0x0D,
PA_14 = 0x0E,
PA_15 = 0x0F,
PB_0 = 0x10,
PB_1 = 0x11,
PB_2 = 0x12,
PB_3 = 0x13,
PB_4 = 0x14,
PB_5 = 0x15,
PB_6 = 0x16,
PB_7 = 0x17,
PB_8 = 0x18,
PB_9 = 0x19,
PB_10 = 0x1A,
PB_11 = 0x1B,
PB_12 = 0x1C,
PB_13 = 0x1D,
PB_14 = 0x1E,
PB_15 = 0x1F,
PC_0 = 0x20,
PC_1 = 0x21,
PC_2 = 0x22,
PC_3 = 0x23,
PC_4 = 0x24,
PC_5 = 0x25,
PC_6 = 0x26,
PC_7 = 0x27,
PC_8 = 0x28,
PC_9 = 0x29,
PC_10 = 0x2A,
PC_11 = 0x2B,
PC_12 = 0x2C,
PC_13 = 0x2D,
PC_14 = 0x2E,
PC_15 = 0x2F,
PD_2 = 0x32,
PH_0 = 0x70,
PH_1 = 0x71,
// ADC internal channels
ADC_TEMP = 0xF0,
ADC_VREF = 0xF1,
// Generic signals namings
LED1 = PB_2,
LED2 = PB_2,
LED3 = PB_2,
LED4 = PB_2,
USER_BUTTON = PC_3,
// Standardized button names
BUTTON1 = USER_BUTTON,
#if (MX_DEFAULT_SERIAL_PINS == 0)
//Use B10/B11 as default serial port
SERIAL_TX = PB_10,
SERIAL_RX = PB_11,
USBTX = PB_10,
USBRX = PB_11,
#elif (MX_DEFAULT_SERIAL_PINS == 1)
//Use A2/A3 as default serial port
SERIAL_TX = PA_2,
SERIAL_RX = PA_3,
USBTX = PA_2,
USBRX = PA_3,
#else
//Use A2/A3 as default serial port
SERIAL_TX = PA_2,
SERIAL_RX = PA_3,
USBTX = PA_2,
USBRX = PA_3,
#endif
I2C_SCL = PB_8,
I2C_SDA = PB_9,
SPI_MOSI = PB_15,
SPI_MISO = PB_14,
SPI_SCK = PB_13,
SPI_CS = PA_1,
PWM_OUT = PC_7,
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
#ifdef __cplusplus
}
#endif
#endif

306
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/TOOLCHAIN_ARM_MICRO/startup_stm32l151xc.S
View File

@ -1,306 +0,0 @@
;********************* (C) COPYRIGHT 2017 STMicroelectronics ********************
;* File Name : startup_stm32l151xc.s
;* Author : MCD Application Team
;* Version : 21-April-2017
;* Date : V2.2.1
;* Description : STM32L151XC Devices vector for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR
;* address.
;* - Configure the system clock
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;*
;* COPYRIGHT(c) 2017 STMicroelectronics
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
IMPORT |Image$$ARM_LIB_STACK$$ZI$$Limit|
__Vectors DCD |Image$$ARM_LIB_STACK$$ZI$$Limit| ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD USB_HP_IRQHandler ; USB High Priority
DCD USB_LP_IRQHandler ; USB Low Priority
DCD DAC_IRQHandler ; DAC
DCD COMP_IRQHandler ; COMP through EXTI Line
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD 0 ; Reserved
DCD TIM9_IRQHandler ; TIM9
DCD TIM10_IRQHandler ; TIM10
DCD TIM11_IRQHandler ; TIM11
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT USB_HP_IRQHandler [WEAK]
EXPORT USB_LP_IRQHandler [WEAK]
EXPORT DAC_IRQHandler [WEAK]
EXPORT COMP_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM9_IRQHandler [WEAK]
EXPORT TIM10_IRQHandler [WEAK]
EXPORT TIM11_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT USB_FS_WKUP_IRQHandler [WEAK]
EXPORT TIM6_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT COMP_ACQ_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
USB_HP_IRQHandler
USB_LP_IRQHandler
DAC_IRQHandler
COMP_IRQHandler
EXTI9_5_IRQHandler
TIM9_IRQHandler
TIM10_IRQHandler
TIM11_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
USB_FS_WKUP_IRQHandler
TIM6_IRQHandler
TIM7_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
COMP_ACQ_IRQHandler
B .
ENDP
ALIGN
END

76
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/TOOLCHAIN_ARM_MICRO/stm32l151rc.sct
View File

@ -1,76 +0,0 @@
#! armcc -E
; Scatter-Loading Description File
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright (c) 2015, STMicroelectronics
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
;
; 1. Redistributions of source code must retain the above copyright notice,
; this list of conditions and the following disclaimer.
; 2. Redistributions in binary form must reproduce the above copyright notice,
; this list of conditions and the following disclaimer in the documentation
; and/or other materials provided with the distribution.
; 3. Neither the name of STMicroelectronics nor the names of its contributors
; may be used to endorse or promote products derived from this software
; without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
#if !defined(MBED_APP_START)
#define MBED_APP_START 0x08000000
#endif
; STM32L151RC: 256KB FLASH
#if !defined(MBED_APP_SIZE)
#define MBED_APP_SIZE 0x40000
#endif
; 32KB SRAM
#if !defined(MBED_RAM_START)
#define MBED_RAM_START 0x20000000
#endif
#if !defined(MBED_RAM_SIZE)
#define MBED_RAM_SIZE 0x8000
#endif
#if !defined(MBED_BOOT_STACK_SIZE)
#define MBED_BOOT_STACK_SIZE 0x400
#endif
; 73 vectors = 292 bytes (0x124) 8-byte aligned = 0x128 (0x124 + 0x4) to be reserved in RAM
#define VECTOR_SIZE 0x128
#define RAM_FIXED_SIZE (MBED_BOOT_STACK_SIZE+VECTOR_SIZE)
LR_IROM1 MBED_APP_START MBED_APP_SIZE { ; load region size_region
ER_IROM1 MBED_APP_START MBED_APP_SIZE { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 (MBED_RAM_START+VECTOR_SIZE) (MBED_RAM_SIZE-VECTOR_SIZE) { ; RW data
.ANY (+RW +ZI)
}
ARM_LIB_HEAP AlignExpr(+0, 16) EMPTY (MBED_RAM_SIZE-RAM_FIXED_SIZE+MBED_RAM_START-AlignExpr(ImageLimit(RW_IRAM1), 16)) {
}
ARM_LIB_STACK (MBED_RAM_START+MBED_RAM_SIZE) EMPTY -MBED_BOOT_STACK_SIZE { ; stack
}
}

306
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/TOOLCHAIN_ARM_STD/startup_stm32l151xc.S
View File

@ -1,306 +0,0 @@
;********************* (C) COPYRIGHT 2017 STMicroelectronics ********************
;* File Name : startup_stm32l151xc.s
;* Author : MCD Application Team
;* Version : 21-April-2017
;* Date : V2.2.1
;* Description : STM32L151XC Devices vector for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR
;* address.
;* - Configure the system clock
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;*
;* COPYRIGHT(c) 2017 STMicroelectronics
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
IMPORT |Image$$ARM_LIB_STACK$$ZI$$Limit|
__Vectors DCD |Image$$ARM_LIB_STACK$$ZI$$Limit| ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD USB_HP_IRQHandler ; USB High Priority
DCD USB_LP_IRQHandler ; USB Low Priority
DCD DAC_IRQHandler ; DAC
DCD COMP_IRQHandler ; COMP through EXTI Line
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD 0 ; Reserved
DCD TIM9_IRQHandler ; TIM9
DCD TIM10_IRQHandler ; TIM10
DCD TIM11_IRQHandler ; TIM11
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT USB_HP_IRQHandler [WEAK]
EXPORT USB_LP_IRQHandler [WEAK]
EXPORT DAC_IRQHandler [WEAK]
EXPORT COMP_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM9_IRQHandler [WEAK]
EXPORT TIM10_IRQHandler [WEAK]
EXPORT TIM11_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT USB_FS_WKUP_IRQHandler [WEAK]
EXPORT TIM6_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT COMP_ACQ_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
USB_HP_IRQHandler
USB_LP_IRQHandler
DAC_IRQHandler
COMP_IRQHandler
EXTI9_5_IRQHandler
TIM9_IRQHandler
TIM10_IRQHandler
TIM11_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
USB_FS_WKUP_IRQHandler
TIM6_IRQHandler
TIM7_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
COMP_ACQ_IRQHandler
B .
ENDP
ALIGN
END

53
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/TOOLCHAIN_ARM_STD/stm32l151rc.sct
View File

@ -1,53 +0,0 @@
#! armcc -E
; Scatter-Loading Description File
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright (c) 2015, STMicroelectronics
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
;
; 1. Redistributions of source code must retain the above copyright notice,
; this list of conditions and the following disclaimer.
; 2. Redistributions in binary form must reproduce the above copyright notice,
; this list of conditions and the following disclaimer in the documentation
; and/or other materials provided with the distribution.
; 3. Neither the name of STMicroelectronics nor the names of its contributors
; may be used to endorse or promote products derived from this software
; without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
#if !defined(MBED_BOOT_STACK_SIZE)
#define MBED_BOOT_STACK_SIZE 0x400
#endif
#define Stack_Size MBED_BOOT_STACK_SIZE
; STM32L151RC: 256KB FLASH + 32KB SRAM
LR_IROM1 0x08000000 0x40000 { ; load region size_region
ER_IROM1 0x08000000 0x40000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
; 73 vectors = 292 bytes(0x124) 8-byte aligned = 0x128 (0x124 + 0x4)to be reserved in RAM
RW_IRAM1 (0x20000000+0x128) (0x8000-0x128) { ; RW data
.ANY (+RW +ZI)
}
ARM_LIB_STACK (0x20000000+0x8000) EMPTY -Stack_Size { ; stack
}
}

165
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/TOOLCHAIN_GCC_ARM/STM32L151XC.ld
View File

@ -1,165 +0,0 @@
/* Linker script to configure memory regions. */
#if !defined(MBED_BOOT_STACK_SIZE)
#define MBED_BOOT_STACK_SIZE 0x400
#endif
STACK_SIZE = MBED_BOOT_STACK_SIZE;
MEMORY
{
/* 256KB FLASH, 32KB RAM, Reserve up till 0x13C. There are 0x73 vectors = 292
* bytes (0x124) in RAM. But all GCC scripts seem to require BootRAM @0x138
* 8-byte aligned(0x13C) = 0x140
*/
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256k
RAM (rwx) : ORIGIN = 0x20000140, LENGTH = 0x8000-0x140
}
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* _estack
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.isr_vector))
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
__etext = .;
_sidata = .;
.data : AT (__etext)
{
__data_start__ = .;
_sdata = .;
*(vtable)
*(.data*)
. = ALIGN(8);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(8);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(8);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(8);
/* All data end */
__data_end__ = .;
_edata = .;
} > RAM
.bss :
{
. = ALIGN(8);
__bss_start__ = .;
_sbss = .;
*(.bss*)
*(COMMON)
. = ALIGN(8);
__bss_end__ = .;
_ebss = .;
} > RAM
.heap (COPY):
{
__end__ = .;
end = __end__;
*(.heap*)
. = ORIGIN(RAM) + LENGTH(RAM) - STACK_SIZE;
__HeapLimit = .;
} > RAM
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
_estack = __StackTop;
__StackLimit = __StackTop - STACK_SIZE;
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
}

405
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/TOOLCHAIN_GCC_ARM/startup_stm32l151xc.S
View File

@ -1,405 +0,0 @@
/**
******************************************************************************
* @file startup_stm32l151xc.s
* @author MCD Application Team
* @brief STM32L151XC Devices vector table for
* Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
/* Call the clock system intitialization function.*/
bl SystemInit
/**
* Calling the crt0 'cold-start' entry point. There __libc_init_array is called
* and when existing hardware_init_hook() and software_init_hook() before
* starting main(). software_init_hook() is available and has to be called due
* to initializsation when using rtos.
*/
bl _start
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_STAMP_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word USB_HP_IRQHandler
.word USB_LP_IRQHandler
.word DAC_IRQHandler
.word COMP_IRQHandler
.word EXTI9_5_IRQHandler
.word 0
.word TIM9_IRQHandler
.word TIM10_IRQHandler
.word TIM11_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word USB_FS_WKUP_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word 0
.word 0
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word COMP_ACQ_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x108. This is for boot in RAM mode for
STM32L151XC devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_STAMP_IRQHandler
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak USB_HP_IRQHandler
.thumb_set USB_HP_IRQHandler,Default_Handler
.weak USB_LP_IRQHandler
.thumb_set USB_LP_IRQHandler,Default_Handler
.weak DAC_IRQHandler
.thumb_set DAC_IRQHandler,Default_Handler
.weak COMP_IRQHandler
.thumb_set COMP_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM9_IRQHandler
.thumb_set TIM9_IRQHandler,Default_Handler
.weak TIM10_IRQHandler
.thumb_set TIM10_IRQHandler,Default_Handler
.weak TIM11_IRQHandler
.thumb_set TIM11_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak USB_FS_WKUP_IRQHandler
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak COMP_ACQ_IRQHandler
.thumb_set COMP_ACQ_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

41
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/cmsis_nvic.h
View File

@ -1,41 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_CMSIS_NVIC_H
#define MBED_CMSIS_NVIC_H
// STM32L151RC
// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
// MCU Peripherals: 57 vectors = 228 bytes from 0x40 to 0x123
// Total: 73 vectors = 292 bytes (0x124) to be reserved in RAM
#define NVIC_NUM_VECTORS 73
#define NVIC_RAM_VECTOR_ADDRESS 0x20000000 // Vectors positioned at start of RAM
#endif

9070
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/stm32l151xc.h
View File

File diff suppressed because it is too large Load Diff

274
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/stm32l1xx.h
View File

@ -1,274 +0,0 @@
/**
******************************************************************************
* @file stm32l1xx.h
* @author MCD Application Team
* @brief CMSIS STM32L1xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32L1xx device used in the target application
* - To use or not the peripheral’s drivers in application code(i.e.
* code will be based on direct access to peripheral’s registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32l1xx
* @{
*/
#ifndef __STM32L1XX_H
#define __STM32L1XX_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32L1)
#define STM32L1
#endif /* STM32L1 */
//MODTRONIX BEGIN - HAL Defines ///////////////////////////////////////////////
//Provide place for adding HAL defines. Alternative to adding them in IDE project properties.
//Add project defines here, or add them to your toolchain compiler preprocessor
//Defines what ports to use for default serial port.
//0 = B10/B11
//1 = A2/A3
#if !defined (MX_DEFAULT_SERIAL_PINS)
#define MX_DEFAULT_SERIAL_PINS 0 /*!< Use B10/B11 for default serial port, in stead of A2/A3 */
#endif
//MODTRONIX END ///////////////////////////////////////////////////////////////
/* Uncomment the line below according to the target STM32L device used in your
application
*/
#if !defined (STM32L100xB) && !defined (STM32L100xBA) && !defined (STM32L100xC) && \
!defined (STM32L151xB) && !defined (STM32L151xBA) && !defined (STM32L151xC) && !defined (STM32L151xCA) && !defined (STM32L151xD) && !defined (STM32L151xDX) && !defined (STM32L151xE) && \
!defined (STM32L152xB) && !defined (STM32L152xBA) && !defined (STM32L152xC) && !defined (STM32L152xCA) && !defined (STM32L152xD) && !defined (STM32L152xDX) && !defined (STM32L152xE) && \
!defined (STM32L162xC) && !defined (STM32L162xCA) && !defined (STM32L162xD) && !defined (STM32L162xDX) && !defined (STM32L162xE)
/* #define STM32L100xB */ /*!< STM32L100C6, STM32L100R and STM32L100RB Devices */
/* #define STM32L100xBA */ /*!< STM32L100C6-A, STM32L100R8-A and STM32L100RB-A Devices */
/* #define STM32L100xC */ /*!< STM32L100RC Devices */
/* #define STM32L151xB */ /*!< STM32L151C6, STM32L151R6, STM32L151C8, STM32L151R8, STM32L151V8, STM32L151CB, STM32L151RB and STM32L151VB */
/* #define STM32L151xBA */ /*!< STM32L151C6-A, STM32L151R6-A, STM32L151C8-A, STM32L151R8-A, STM32L151V8-A, STM32L151CB-A, STM32L151RB-A and STM32L151VB-A */
#define STM32L151xC /*!< STM32L151CC, STM32L151UC, STM32L151RC and STM32L151VC */
/* #define STM32L151xCA */ /*!< STM32L151RC-A, STM32L151VC-A, STM32L151QC and STM32L151ZC */
/* #define STM32L151xD */ /*!< STM32L151QD, STM32L151RD, STM32L151VD & STM32L151ZD */
/* #define STM32L151xDX */ /*!< STM32L151VD-X Devices */
/* #define STM32L151xE */ /*!< STM32L151QE, STM32L151RE, STM32L151VE and STM32L151ZE */
/* #define STM32L152xB */ /*!< STM32L152C6, STM32L152R6, STM32L152C8, STM32L152R8, STM32L152V8, STM32L152CB, STM32L152RB and STM32L152VB */
/* #define STM32L152xBA */ /*!< STM32L152C6-A, STM32L152R6-A, STM32L152C8-A, STM32L152R8-A, STM32L152V8-A, STM32L152CB-A, STM32L152RB-A and STM32L152VB-A */
/* #define STM32L152xC */ /*!< STM32L152CC, STM32L152UC, STM32L152RC and STM32L152VC */
/* #define STM32L152xCA */ /*!< STM32L152RC-A, STM32L152VC-A, STM32L152QC and STM32L152ZC */
/* #define STM32L152xD */ /*!< STM32L152QD, STM32L152RD, STM32L152VD and STM32L152ZD */
/* #define STM32L152xDX */ /*!< STM32L152VD-X Devices */
/* #define STM32L152xE */ /*!< STM32L152QE, STM32L152RE, STM32L152VE and STM32L152ZE */
/* #define STM32L162xC */ /*!< STM32L162RC and STM32L162VC */
/* #define STM32L162xCA */ /*!< STM32L162RC-A, STM32L162VC-A, STM32L162QC and STM32L162ZC */
/* #define STM32L162xD */ /*!< STM32L162QD, STM32L162RD, STM32L162VD and STM32L162ZD */
/* #define STM32L162xDX */ /*!< STM32L162VD-X Devices */
/* #define STM32L162xE */ /*!< STM32L162RE, STM32L162VE and STM32L162ZE */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
#define USE_HAL_DRIVER
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number
*/
#define __STM32L1xx_CMSIS_VERSION_MAIN (0x02) /*!< [31:24] main version */
#define __STM32L1xx_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
#define __STM32L1xx_CMSIS_VERSION_SUB2 (0x03) /*!< [15:8] sub2 version */
#define __STM32L1xx_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32L1xx_CMSIS_VERSION ((__STM32L1xx_CMSIS_VERSION_MAIN << 24)\
|(__STM32L1xx_CMSIS_VERSION_SUB1 << 16)\
|(__STM32L1xx_CMSIS_VERSION_SUB2 << 8 )\
|(__STM32L1xx_CMSIS_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32L100xB)
#include "stm32l100xb.h"
#elif defined(STM32L100xBA)
#include "stm32l100xba.h"
#elif defined(STM32L100xC)
#include "stm32l100xc.h"
#elif defined(STM32L151xB)
#include "stm32l151xb.h"
#elif defined(STM32L151xBA)
#include "stm32l151xba.h"
#elif defined(STM32L151xC)
#include "stm32l151xc.h"
#elif defined(STM32L151xCA)
#include "stm32l151xca.h"
#elif defined(STM32L151xD)
#include "stm32l151xd.h"
#elif defined(STM32L151xDX)
#include "stm32l151xdx.h"
#elif defined(STM32L151xE)
#include "stm32l151xe.h"
#elif defined(STM32L152xB)
#include "stm32l152xb.h"
#elif defined(STM32L152xBA)
#include "stm32l152xba.h"
#elif defined(STM32L152xC)
#include "stm32l152xc.h"
#elif defined(STM32L152xCA)
#include "stm32l152xca.h"
#elif defined(STM32L152xD)
#include "stm32l152xd.h"
#elif defined(STM32L152xDX)
#include "stm32l152xdx.h"
#elif defined(STM32L152xE)
#include "stm32l152xe.h"
#elif defined(STM32L162xC)
#include "stm32l162xc.h"
#elif defined(STM32L162xCA)
#include "stm32l162xca.h"
#elif defined(STM32L162xD)
#include "stm32l162xd.h"
#elif defined(STM32L162xDX)
#include "stm32l162xdx.h"
#elif defined(STM32L162xE)
#include "stm32l162xe.h"
#else
#error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
ERROR = 0,
SUCCESS = !ERROR
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32l1xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __STM32L1xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

234
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/system_clock.c
View File

@ -1,234 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* This file configures the system clock as follows:
*-----------------------------------------------------------------------------
* System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
* | (external 16 MHz clock) | (internal 16 MHz)
* | 2- PLL_HSE_XTAL |
* | (external 16 MHz xtal) |
*-----------------------------------------------------------------------------
* SYSCLK(MHz) | 32 | 32
*-----------------------------------------------------------------------------
* AHBCLK (MHz) | 32 | 32
*-----------------------------------------------------------------------------
* APB1CLK (MHz) | 32 | 32
*-----------------------------------------------------------------------------
* APB2CLK (MHz) | 32 | 32
*-----------------------------------------------------------------------------
* USB capable (48 MHz precise clock) | YES | NO
*-----------------------------------------------------------------------------
******************************************************************************
*/
#include "stm32l1xx.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
#define USE_PLL_HSE_EXTC (0) /* Use external clock */
#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
#endif
uint8_t SetSysClock_PLL_HSI(void);
/**
* @brief Setup the microcontroller system.
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemCoreClock variable.
* @param None
* @retval None
*/
void SystemInit (void)
{
/*!< Set MSION bit */
RCC->CR |= (uint32_t)0x00000100;
/*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
RCC->CFGR &= (uint32_t)0x88FFC00C;
/*!< Reset HSION, HSEON, CSSON and PLLON bits */
RCC->CR &= (uint32_t)0xEEFEFFFE;
/*!< Reset HSEBYP bit */
RCC->CR &= (uint32_t)0xFFFBFFFF;
/*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
RCC->CFGR &= (uint32_t)0xFF02FFFF;
/*!< Disable all interrupts */
RCC->CIR = 0x00000000;
#ifdef DATA_IN_ExtSRAM
SystemInit_ExtMemCtl();
#endif /* DATA_IN_ExtSRAM */
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
#endif
}
/**
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
* AHB/APBx prescalers and Flash settings
* @note This function should be called only once the RCC clock configuration
* is reset to the default reset state (done in SystemInit() function).
* @param None
* @retval None
*/
void SetSysClock(void)
{
/* 1- Try to start with HSE and external clock */
#if USE_PLL_HSE_EXTC != 0
if (SetSysClock_PLL_HSE(1) == 0)
#endif
{
/* 2- If fail try to start with HSE and external xtal */
#if USE_PLL_HSE_XTAL != 0
if (SetSysClock_PLL_HSE(0) == 0)
#endif
{
/* 3- If fail start with HSI clock */
if (SetSysClock_PLL_HSI() == 0) {
while(1) {
// [TODO] Put something here to tell the user that a problem occured...
}
}
}
}
/* Output clock on MCO1 pin(PA8) for debugging purpose */
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
}
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
/* Used to gain time after DeepSleep in case HSI is used */
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE and HSI48 oscillators and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 16 MHz xtal on OSC_IN/OSC_OUT */
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 16 MHz clock on OSC_IN */
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
// SYSCLK = 32 MHz ((16 MHz * 6) / 3)
// USBCLK = 48 MHz ((16 MHz * 6) / 2) --> USB OK
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
return 0; // FAIL
}
/* Output clock on MCO1 pin(PA8) for debugging purpose */
//if (bypass == 0)
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
//else
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
return 1; // OK
}
#endif
/******************************************************************************/
/* PLL (clocked by HSI) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSI oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
// SYSCLK = 32 MHz ((16 MHz * 4) / 2)
// USBCLK = 64 MHz (16 MHz * 4) --> USB not possible
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4;
RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
/* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */
while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {};
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
return 0; // FAIL
}
/* Output clock on MCO1 pin(PA8) for debugging purpose */
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
return 1; // OK
}

126
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/system_stm32l1xx.h
View File

@ -1,126 +0,0 @@
/**
******************************************************************************
* @file system_stm32l1xx.h
* @author MCD Application Team
* @brief CMSIS Cortex-M3 Device System Source File for STM32L1xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32l1xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32L1XX_H
#define __SYSTEM_STM32L1XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32L1xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L1xx_System_Exported_types
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/*
*/
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
extern const uint8_t PLLMulTable[9]; /*!< PLL multipiers table values */
/**
* @}
*/
/** @addtogroup STM32L1xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L1xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L1xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
extern void SetSysClock(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32L1XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

45
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device/us_ticker_data.h
View File

@ -1,45 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2018 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __US_TICKER_DATA_H
#define __US_TICKER_DATA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l1xx.h"
#include "stm32l1xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
#define TIM_MST_BIT_WIDTH 32 // 16 or 32
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#ifdef __cplusplus
}
#endif
#endif // __US_TICKER_DATA_H

63
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/objects.h
View File

@ -1,63 +0,0 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

29
targets/targets.json
View File

@ -6342,35 +6342,6 @@
"C036"
]
},
"NZ32_SC151": {
"inherits": [
"FAMILY_STM32"
],
"core": "Cortex-M3",
"default_toolchain": "uARM",
"program_cycle_s": 1.5,
"extra_labels_add": [
"STM32L1",
"STM32L151RC"
],
"overrides": {
"lse_available": 0
},
"supported_toolchains": [
"ARM",
"uARM",
"GCC_ARM"
],
"device_has_add": [
"ANALOGOUT",
"MPU"
],
"device_has_remove": [
"LPTICKER"
],
"default_lib": "small",
"device_name": "STM32L151RC"
},
"MCU_NRF51": {
"inherits": [
"Target"

90
tools/export/coide/nz32_sc151.coproj.tmpl
View File

@ -1,90 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Project version="2G - 1.7.5" name="{{name}}">
<Target name="{{name}}" isCurrent="1">
<Device manufacturerId="9" manufacturerName="ST" chipId="546" chipName="STM32L151RC" boardId="" boardName=""/>
<BuildOption>
<Compile>
<Option name="OptimizationLevel" value="4"/>
<Option name="UseFPU" value="0"/>
<Option name="UserEditCompiler" value="-fno-common; -fmessage-length=0; -Wall; -fno-strict-aliasing; -fno-rtti; -fno-exceptions; -ffunction-sections; -fdata-sections; -std=gnu++14"/>
<Option name="FPU" value="1"/>
<Option name="SupportCPlusplus" value="1"/>
<Includepaths>
{% for path in include_paths %} <Includepath path="{{path}}"/> {% endfor %}
</Includepaths>
<DefinedSymbols>
{% for s in symbols %} <Define name="{{s}}"/> {% endfor %}
</DefinedSymbols>
</Compile>
<Link useDefault="0">
<Option name="DiscardUnusedSection" value="1"/>
<Option name="UserEditLinkder" value=""/>
<Option name="UseMemoryLayout" value="0"/>
<Option name="LTO" value="0"/>
<Option name="IsNewStartupCode" value="1"/>
<Option name="Library" value="Not use C Library"/>
<Option name="nostartfiles" value="0"/>
<Option name="UserEditLinker" value="-Wl,--wrap,main; --specs=nano.specs; -u _printf_float; -u _scanf_float; {% for file in object_files %}
${project.path}/{{file}}; {% endfor %} {% for p in library_paths %}-L${project.path}/{{p}}; {% endfor %}"/>
<LinkedLibraries>
{% for lib in libraries %}
<Libset dir="" libs="{{lib}}"/>
{% endfor %}
<Libset dir="" libs="stdc++"/>
<Libset dir="" libs="supc++"/>
<Libset dir="" libs="m"/>
<Libset dir="" libs="gcc"/>
<Libset dir="" libs="c"/>
<Libset dir="" libs="nosys"/>
</LinkedLibraries>
<MemoryAreas debugInFlashNotRAM="1">
<Memory name="IROM1" type="ReadOnly" size="0x00040000" startValue="0x08000000"/>
<Memory name="IRAM1" type="ReadWrite" size="0x00007EC4" startValue="0x2000013C"/>
<Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
<Memory name="IRAM2" type="ReadWrite" size="" startValue=""/>
</MemoryAreas>
<LocateLinkFile path="{{scatter_file}}" type="0"/>
</Link>
<Output>
<Option name="OutputFileType" value="0"/>
<Option name="Path" value="./"/>
<Option name="Name" value="{{name}}"/>
<Option name="HEX" value="1"/>
<Option name="BIN" value="1"/>
</Output>
<User>
<UserRun name="Run#1" type="Before" checked="0" value=""/>
<UserRun name="Run#1" type="After" checked="0" value=""/>
</User>
</BuildOption>
<DebugOption>
<Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
<Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
<Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
<Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
<Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
<Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
<Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="stm32l1xx_384.elf"/>
</DebugOption>
<ExcludeFile/>
</Target>
<Components path="./"/>
<Files>
{% for file in source_files %}
<File name="sources/{{file.path}}" path="{{file.path}}" type="{{file.type}}"/>
{% endfor %}
{% for file in header_files %}
<File name="headers/{{file.path}}" path="{{file.path}}" type="{{file.type}}"/>
{% endfor %}
</Files>
</Project>