Merge pull request #1318 from Wiznet/mbed_dev1

Change directory structure and move files.

libraries/mbed/targets/cmsis/TARGET_WIZNET/TARGET_W7500x/W7500x.h

@@ -125,7 +125,6 @@ typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
 
 
 
-
 /**
   * @}
   */
@@ -1147,6 +1146,23 @@ typedef struct
 
 
 
+typedef enum
+{
+    PAD_PA = 0,
+    PAD_PB,
+    PAD_PC,
+    PAD_PD
+}PAD_Type;
+
+typedef enum
+{
+    PAD_AF0    = Px_AFSR_AF0,
+    PAD_AF1    = Px_AFSR_AF1,
+    PAD_AF2    = Px_AFSR_AF2,
+    PAD_AF3    = Px_AFSR_AF3
+}PAD_AF_TypeDef;
+
+
 #if !defined  (USE_HAL_DRIVER)
 #define USE_HAL_DRIVER
 #endif /* USE_HAL_DRIVER */
@@ -1154,9 +1170,16 @@ typedef struct
 
 
 #if defined (USE_HAL_DRIVER)
-    #include "W7500x_conf.h"
+//    #include "system_W7500x.h"
+//    #include "W7500x_conf.h"
 #endif
 
+#ifdef USE_FULL_ASSERT
+    #define assert_param(expr)  ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__,__LINE__))
+#else
+    #define assert_param(expr)   ((void)0)
+#endif /* USE_FULL_ASSERT */
+
 #ifdef __cplusplus
 }
 #endif

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/PeripheralNames.h

@@ -46,9 +46,6 @@ typedef enum {
     UART_1 = (int)W7500x_UART1_BASE
 } UARTName;
 
-#define STDIO_UART_TX  PC_2
-#define STDIO_UART_RX  PC_3
-#define STDIO_UART     UART_1
 
 typedef enum {
     SPI_0 = (int)SSP0_BASE,

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/PeripheralPins.c

@@ -73,7 +73,7 @@ const PinMap PinMap_I2C_SCL[] = {
     {PA_9, I2C_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
     {PC_8, I2C_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
     {PC_4, I2C_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
-    {PC_5, I2C_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
+    {PA_5, I2C_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
     {NC,    NC,    0}
 };
 
@@ -82,32 +82,32 @@ const PinMap PinMap_I2C_SCL[] = {
 const PinMap PinMap_SPI_SCLK[] = {
     {PA_6 , SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
     {PB_1 , SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
-    {PC_12, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
-    {PA_12, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
+    {PC_13, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
+    {PA_12, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
     {NC   , NC   , 0}
 };
 
 const PinMap PinMap_SPI_MOSI[] = {
     {PA_8 , SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
     {PB_3 , SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
-    {PC_10, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
-    {PA_14, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
+    {PC_15, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
+    {PA_14, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
     {NC   , NC   , 0}
 };
 
 const PinMap PinMap_SPI_MISO[] = {
     {PA_7 , SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
     {PB_2 , SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
-    {PC_11, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
-    {PA_13, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
+    {PC_14, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
+    {PA_13, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
     {NC   , NC   , 0}
 };
 
 const PinMap PinMap_SPI_SSEL[] = {
     {PA_5 , SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
     {PB_0 , SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0)},
-    {PC_13, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
-    {PA_11, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF3)},
+    {PC_12, SPI_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
+    {PA_11, SPI_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF2)},
     {NC   , NC   , 0}
 };
 

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/device.h

@@ -67,6 +67,11 @@
 
 #define DEVICE_STDIO_MESSAGES   1
 
+#define STDIO_UART_TX  PC_2
+#define STDIO_UART_RX  PC_3
+#define STDIO_UART     UART_1
+
+
 #define DEVICE_ERROR_RED        0
 
 #include "objects.h"

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_adc.c

@@ -1,4 +1,5 @@
 #include "W7500x.h"
+#include "W7500x_adc.h"
 
 void ADC_PowerDownEnable (FunctionalState NewState)
 {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_dualtimer.c

@@ -13,6 +13,7 @@
 
 /* Includes -------------------------------------------*/
 #include "W7500x.h"
+#include "W7500x_dualtimer.h"
 
 void DUALTIMER_ClockEnable(DUALTIMER_TypeDef* DUALTIMERn)
 {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_exti.c

@@ -1,5 +1,6 @@
 #include "W7500x.h"
-
+#include "W7500x_exti.h"
+#include "W7500x_gpio.h"
 
 
 /**

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_gpio.c

@@ -1,6 +1,5 @@
 #include "W7500x.h"
-
-
+#include "W7500x_gpio.h"
 
 void HAL_GPIO_DeInit(GPIO_TypeDef* GPIOx)
 {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_gpio.h

@@ -83,21 +83,6 @@ typedef enum
     Bit_SET
 }BitAction;
 
-typedef enum
-{
-    PAD_PA = 0,
-    PAD_PB,
-    PAD_PC,
-    PAD_PD
-}PAD_Type;
-
-typedef enum
-{
-    PAD_AF0    = Px_AFSR_AF0,
-    PAD_AF1    = Px_AFSR_AF1,
-    PAD_AF2    = Px_AFSR_AF2,
-    PAD_AF3    = Px_AFSR_AF3
-}PAD_AF_TypeDef;
 
 #define IS_PAD_TYPE(Px)  (((Px) == PAD_PA) || ((Px) == PAD_PB) \
                           ((Px) == PAD_PC) || ((Px) == PAD_PD))

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_i2c.c

@@ -28,8 +28,9 @@
  *******************************************************************************
  */
 /*include -------------------------------------*/
-#include <stdio.h>
 #include "W7500x.h"
+#include "W7500x_i2c.h"
+#include "W7500x_gpio.h"
 
 GPIO_InitTypeDef GPIO_InitDef;
 
@@ -61,8 +62,8 @@ uint32_t I2C_Init(I2C_ConfigStruct* conf)
     HAL_GPIO_ResetBits((GPIO_TypeDef*)(GPIOA_BASE + (sda_port_num << 24)), sda_pin_index);
     
     //Pin muxing
-    HAL_PAD_AFConfig(scl_port_num, scl_pin_index, PAD_AF1);
-    HAL_PAD_AFConfig(sda_port_num, sda_pin_index, PAD_AF1);
+    HAL_PAD_AFConfig((PAD_Type)scl_port_num, (uint16_t)scl_pin_index, PAD_AF1);
+    HAL_PAD_AFConfig((PAD_Type)sda_port_num, (uint16_t)sda_pin_index, PAD_AF1);
 
     return 0;
 }
@@ -98,9 +99,6 @@ uint8_t I2C_ReadBitSDA(I2C_ConfigStruct* conf)
     
     if(HAL_GPIO_ReadInputDataBit((GPIO_TypeDef*)(GPIOA_BASE + (sda_port_num << 24)), sda_pin_index))
         return 1;
-    else
-        return 0;
-    
     
     return 0;
 }
@@ -193,7 +191,7 @@ int I2C_Write(I2C_ConfigStruct* conf, uint8_t addr, uint8_t* data, uint32_t len)
     //Write addr
     if(I2C_WriteByte(conf, addr) != 0)
     {
-        printf("Received NACK at address phase!!\r\n");
+        //printf("Received NACK at address phase!!\r\n");
         return -1;
     }
 
@@ -218,7 +216,7 @@ int I2C_WriteRepeated(I2C_ConfigStruct* conf, uint8_t addr, uint8_t* data, uint3
     //Write addr
     if(I2C_WriteByte(conf, addr) != 0)
     {
-        printf("Received NACK at address phase!!\r\n");
+        //printf("Received NACK at address phase!!\r\n");
         return -1;
     }
 
@@ -241,7 +239,7 @@ int I2C_Read(I2C_ConfigStruct* conf, uint8_t addr, uint8_t* data, uint32_t len)
     //Write addr | read command
     if(I2C_WriteByte(conf, (addr | 1)) != 0)
     {
-        printf("Received NACK at address phase!!\r\n");
+        //printf("Received NACK at address phase!!\r\n");
         return -1;
     }
     
@@ -270,7 +268,7 @@ int I2C_ReadRepeated(I2C_ConfigStruct* conf, uint8_t addr, uint8_t* data, uint32
     //Write addr | read command
     if(I2C_WriteByte(conf, (addr | 1)) != 0)
     {
-        printf("Received NACK at address phase!!\r\n");
+        //printf("Received NACK at address phase!!\r\n");
         return -1;
     }
     

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_i2c.h

@@ -28,11 +28,11 @@
  *******************************************************************************
  */
 /*include -------------------------------------*/
-#include "W7500x.h"
-
 #ifndef __W7500X_I2C_H
 #define __W7500X_I2C_H
 
+#include "W7500x.h"
+
 
 typedef enum {
     I2C_PA_5    = 0x05,

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_pwm.c

@@ -13,6 +13,7 @@
   
 /* Includes -------------------------------------------*/
 #include "W7500x.h"
+#include "W7500x_pwm.h"
 
 void PWM_DeInit(PWM_CHn_TypeDef* PWM_CHn)
 {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/W7500x_Peripheral_Library/W7500x_uart.c

@@ -14,6 +14,7 @@
 
 /* Includes ------------------------------------------------------------------*/
 #include "W7500x.h"
+#include "W7500x_uart.h"
 
 void UART_StructInit(UART_InitTypeDef* UART_InitStruct)
 {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/analogin_api.c

@@ -36,6 +36,7 @@
 #include "wait_api.h"
 #include "cmsis.h"
 #include "pinmap.h"
+#include "W7500x_adc.h"
 #include "PeripheralPins.h"
 
 

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/gpio_irq_api.c

@@ -46,7 +46,7 @@ static uint32_t channel_ids[4][16];
 #ifdef __cplusplus
 extern "C"{
 #endif
-
+void port_generic_handler(GPIO_TypeDef* GPIOx, uint32_t port_num);
  
 void PORT0_Handler(void)
 {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/gpio_object.h

@@ -32,6 +32,7 @@
 #define MBED_GPIO_OBJECT_H
 
 #include "mbed_assert.h"
+#include "W7500x_gpio.h"
 
 #ifdef __cplusplus
 extern "C" {

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/i2c_api.c

@@ -40,6 +40,7 @@
 
 #include "wait_api.h"
 #include "us_ticker_api.h"
+#include "W7500x_i2c.h"
 
 /* Timeout values for flags and events waiting loops. These timeouts are
    not based on accurate values, they just guarantee that the application will
@@ -106,12 +107,12 @@ int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
     
     if(stop)
     {  
-        if(I2C_Read(&conf, address,  data, length) != 0)
+        if(I2C_Read(&conf, address,  (uint8_t*)data, length) != 0)
             return -1;
     }
     else
     {
-        if(I2C_ReadRepeated(&conf, address,  data, length) != 0)
+        if(I2C_ReadRepeated(&conf, address,  (uint8_t*)data, length) != 0)
             return -1;
     }
     
@@ -129,12 +130,12 @@ int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
     
     if(stop)
     {  
-        if(I2C_Write(&conf, address,  data, length) != 0)
+        if(I2C_Write(&conf, address,  (uint8_t*)data, length) != 0)
            return -1;
     }
     else
     {
-        if(I2C_WriteRepeated(&conf, address,  data, length) != 0)
+        if(I2C_WriteRepeated(&conf, address,  (uint8_t*)data, length) != 0)
            return -1;
     }
     

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/pinmap.c

@@ -32,6 +32,8 @@
 #include "pinmap.h"
 #include "PortNames.h"
 #include "mbed_error.h"
+#include "W7500x.h"
+#include "W7500x_gpio.h"
 
 
 uint32_t Get_GPIO_BaseAddress(uint32_t port_idx)

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/pwmout_api.c

@@ -35,6 +35,7 @@
 #include "pinmap.h"
 #include "mbed_error.h"
 #include "PeripheralPins.h"
+#include "W7500x_pwm.h"
 
 static PWM_TimerModeInitTypeDef TimerModeStructure;
 

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/rtc_api.c

@@ -14,6 +14,8 @@
  * limitations under the License.
  */
 #include "rtc_api.h"
+#include "cmsis.h"
+#include "W7500x_pwm.h"
 
 time_t wiz_rtc_time;
 char rtc_enabled = 0;

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/serial_api.c

@@ -37,6 +37,7 @@
 #include "pinmap.h"
 #include <string.h>
 #include "PeripheralPins.h"
+#include "W7500x_uart.h"
 
 #define UART_NUM (2)
 

libraries/mbed/targets/hal/TARGET_WIZNET/TARGET_W7500x/us_ticker.c

@@ -32,6 +32,8 @@
 #include "us_ticker_api.h"
 #include "PeripheralNames.h"
 #include "system_W7500x.h"
+#include "W7500x_dualtimer.h"
+#include "W7500x_pwm.h"
 
 #define TIMER_0         DUALTIMER0_0
 #define TIMER_1         PWM_CH1