diff --git a/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/PinNames.h b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/PinNames.h new file mode 100644 index 0000000000..6fbcdc5946 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/PinNames.h @@ -0,0 +1,143 @@ +/* mbed Microcontroller Library + * Copyright (c) 2013 Nordic Semiconductor + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 3 + +typedef enum { + p0 = 0, + p1 = 1, + p2 = 2, + p3 = 3, + p4 = 4, + p5 = 5, + p6 = 6, + p7 = 7, + p8 = 8, + p9 = 9, + p10 = 10, + p11 = 11, + p12 = 12, + p13 = 13, + p14 = 14, + p15 = 15, + p16 = 16, + p17 = 17, + p18 = 18, + p19 = 19, + p20 = 20, + p21 = 21, + p22 = 22, + p23 = 23, + p24 = 24, + p25 = 25, + p26 = 26, + p27 = 27, + p28 = 28, + p29 = 29, + p30 = 30, +// p31=31, + + P0_0 = p0, + P0_1 = p1, + P0_2 = p2, + P0_3 = p3, + P0_4 = p4, + P0_5 = p5, + P0_6 = p6, + P0_7 = p7, + + P0_8 = p8, + P0_9 = p9, + P0_10 = p10, + P0_11 = p11, + P0_12 = p12, + P0_13 = p13, + P0_14 = p14, + P0_15 = p15, + + P0_16 = p16, + P0_17 = p17, + P0_18 = p18, + P0_19 = p19, + P0_20 = p20, + P0_21 = p21, + P0_22 = p22, + P0_23 = p23, + + P0_24 = p24, + P0_25 = p25, + P0_26 = p26, + P0_27 = p27, + P0_28 = p28, + P0_29 = p29, + P0_30 = p30, + + LED1 = p21, + LED2 = p22, + LED3 = p23, + LED4 = p24, + + BUTTON1 = p17, + BUTTON = BUTTON1, + + RX_PIN_NUMBER = p11, + TX_PIN_NUMBER = p9, + CTS_PIN_NUMBER = p10, + RTS_PIN_NUMBER = p8, + + // mbed interface Pins + USBTX = TX_PIN_NUMBER, + USBRX = RX_PIN_NUMBER, + + I2C_SDA0 = p18, + I2C_SCL0 = p19, + + MPU6050_SDA_PIN = p18, + MPU6050_SCL_PIN = p19, + MPU6050_INT_PIN = p20, + + BATTERY_PIN = p1, + VCC_CTRL_PIN = p30, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/device.h b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/device.h new file mode 100644 index 0000000000..9d5a5e2109 --- /dev/null +++ b/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/device.h @@ -0,0 +1,57 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif diff --git a/workspace_tools/build_release.py b/workspace_tools/build_release.py index cdd04bff5f..4ff58ef593 100755 --- a/workspace_tools/build_release.py +++ b/workspace_tools/build_release.py @@ -74,6 +74,7 @@ OFFICIAL_MBED_LIBRARY_BUILD = ( ('NRF51_DONGLE', ('ARM', 'GCC_ARM')), ('HRM1017', ('ARM', 'GCC_ARM')), ('ARCH_BLE', ('ARM', 'GCC_ARM')), + ('BLE_SMURFS', ('ARM', 'GCC_ARM')), ('RBLAB_NRF51822', ('ARM', 'GCC_ARM')), ('RBLAB_BLENANO', ('ARM', 'GCC_ARM')), ('WALLBOT_BLE', ('ARM', 'GCC_ARM')), @@ -121,4 +122,3 @@ if __name__ == '__main__': if failures: print "\n\nBuild failures:" print "\n".join([" * %s" % f for f in failures]) - diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py index 8cfd66595a..bc25a78060 100644 --- a/workspace_tools/targets.py +++ b/workspace_tools/targets.py @@ -480,7 +480,7 @@ class NUCLEO_F303RE(Target): self.default_toolchain = "uARM" self.supported_form_factors = ["ARDUINO", "MORPHO"] self.detect_code = ["0706"] - + class NUCLEO_F334R8(Target): def __init__(self): Target.__init__(self) @@ -731,6 +731,19 @@ class ARCH_BLE(NRF51822): self.macros = ['TARGET_NRF51822'] self.supported_form_factors = ["ARDUINO"] +class BLE_SMURFS(NRF51822): + def __init__(self): + NRF51822.__init__(self) + self.extra_labels = ['NORDIC', 'MCU_NRF51822', 'MCU_NORDIC_16K'] + self.macros = ['TARGET_NRF51822'] + +class BLE_SMURFS_OTA(NRF51822): + def __init__(self): + NRF51822.__init__(self) + self.extra_labels = ['NORDIC', 'MCU_NRF51822', 'MCU_NORDIC_16K'] + self.macros = ['TARGET_NRF51822', 'TARGET_BLE_SMURFS', 'TARGET_OTA_ENABLED'] + self.MERGE_SOFT_DEVICE = False + class HRM1017(NRF51822): def __init__(self): NRF51822.__init__(self) @@ -808,6 +821,7 @@ TARGETS = [ LPC11U24_301(), LPC11U35_401(), LPC11U35_501(), + XADOW_M0(), # LPC11U35_501 LPC11U35_Y5_MBUG(), LPC11U37_501(), LPCCAPPUCCINO(),# LPC11U37_501 @@ -871,11 +885,12 @@ TARGETS = [ NRF51_DK_OTA(), # nRF51822 NRF51_DONGLE(), ARCH_BLE(), # nRF51822 + BLE_SMURFS(), + BLE_SMURFS_OTA(), HRM1017(), # nRF51822 RBLAB_NRF51822(),# nRF51822 RBLAB_BLENANO(),# nRF51822 - NRF51822_Y5_MBUG(),#nRF51822 - XADOW_M0(), # nRF51822 + NRF51822_Y5_MBUG(),#nRF51822 WALLBOT_BLE(), # nRF51822 ### ARM ###