Updated testcases

TESTS/events/queue/main.cpp

@@ -22,7 +22,7 @@
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -357,3 +357,4 @@ int main()
     return !Harness::run(specification);
 }
 
+#endif // !DEVICE_USTICKER

TESTS/events/timing/main.cpp

@@ -26,7 +26,7 @@ using namespace utest::v1;
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 // Test delay
 #ifndef TEST_EVENTS_TIMING_TIME
@@ -148,3 +148,4 @@ int main()
     return !Harness::run(specification);
 }
 
+#endif // !DEVICE_USTICKER

TESTS/lorawan/loraradio/main.cpp

@@ -36,6 +36,7 @@
 #error [NOT_SUPPORTED] Requires parameters from application config file.
 #endif
 
+#if (MBED_CONF_APP_LORA_RADIO == SX1272) || (MBED_CONF_APP_LORA_RADIO == SX1276)
 
 using namespace utest::v1;
 using namespace mbed;
@@ -281,3 +282,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // (MBED_CONF_APP_LORA_RADIO == SX1272) || (MBED_CONF_APP_LORA_RADIO == SX1276)

TESTS/mbed-crypto/sanity/main.cpp

@@ -19,7 +19,7 @@
 
 #if ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)))
 #error [NOT_SUPPORTED] Mbed Crypto is OFF - skipping.
-#endif
+#else
 
 #include <stdio.h>
 #include "mbed.h"
@@ -460,3 +460,4 @@ int main(void)
 {
     return !Harness::run(specification);
 }
+ #endif // ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)))

TESTS/mbed_drivers/flashiap/main.cpp

@@ -17,7 +17,7 @@
 
 #if !DEVICE_FLASH
 #error [NOT_SUPPORTED] Flash API not supported for this target
-#endif
+#else
 
 #include "utest/utest.h"
 #include "utest/utest_serial.h"
@@ -328,3 +328,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_FLASH

TESTS/mbed_drivers/lp_ticker/main.cpp

@@ -21,7 +21,7 @@
 
 #if !DEVICE_LPTICKER
 #error [NOT_SUPPORTED] Low power ticker not supported for this target
-#endif
+#else
 
 using utest::v1::Case;
 
@@ -228,3 +228,5 @@ int main()
 {
     utest::v1::Harness::run(specification);
 }
+
+#endif // !DEVICE_LPTICKER

TESTS/mbed_drivers/lp_timeout/main.cpp

@@ -16,7 +16,7 @@
 
 #if !DEVICE_LPTICKER
 #error [NOT_SUPPORTED] Low power timer not supported for this target
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -93,3 +93,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_LPTICKER

TESTS/mbed_drivers/lp_timer/main.cpp

@@ -24,7 +24,7 @@
 
 #if !DEVICE_LPTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -350,3 +350,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_LPTICKER

TESTS/mbed_drivers/mem_trace/main.cpp

@@ -26,7 +26,7 @@
 
 #ifndef MBED_MEM_TRACING_ENABLED
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using utest::v1::Case;
 
@@ -427,3 +427,5 @@ int main()
 
     return !utest::v1::Harness::run(specification);
 }
+
+#endif // MBED_MEM_TRACING_ENABLED

TESTS/mbed_drivers/race_test/main.cpp

@@ -22,13 +22,9 @@
 #include "SingletonPtr.h"
 #include <stdio.h>
 
-#ifdef MBED_RTOS_SINGLE_THREAD
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported for single threaded enviroment
+#error [NOT_SUPPORTED] Test not supported for single threaded enviroment. UsTicker need to be enabled for this test.
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using namespace utest::v1;
 
@@ -135,3 +131,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbed_drivers/reset_reason/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_RESET_REASON
 #error [NOT_SUPPORTED] Reset reason API not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -141,3 +141,5 @@ int main()
     test_reset_reason(); // The result of this test suite is reported by the host side.
     GREENTEA_TESTSUITE_RESULT(0); // Fail on any error.
 }
+
+#endif // !DEVICE_RESET_REASON

TESTS/mbed_drivers/rtc/main.cpp

@@ -23,7 +23,7 @@
 
 #if !DEVICE_RTC || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -494,3 +494,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_RTC || !DEVICE_USTICKER

TESTS/mbed_drivers/sleep_lock/main.cpp

@@ -17,7 +17,7 @@
 
 #if !DEVICE_SLEEP
 #error [NOT_SUPPORTED] Sleep not supported for this target
-#endif
+#else
 
 #include "utest/utest.h"
 #include "unity/unity.h"
@@ -132,3 +132,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_SLEEP

TESTS/mbed_drivers/ticker/main.cpp

@@ -20,7 +20,7 @@
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using utest::v1::Case;
 
@@ -354,3 +354,5 @@ int main()
 {
     utest::v1::Harness::run(specification);
 }
+
+#endif // !DEVICE_USTICKER

TESTS/mbed_drivers/timeout/main.cpp

@@ -21,7 +21,7 @@
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] usticker not supported for this target.
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -87,3 +87,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_USTICKER

TESTS/mbed_drivers/timer/main.cpp

@@ -24,7 +24,7 @@
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -789,3 +789,4 @@ int main()
     return !Harness::run(specification);
 }
 
+#endif // !DEVICE_USTICKER

TESTS/mbed_drivers/timerevent/main.cpp

@@ -15,7 +15,7 @@
  */
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] usticker not supported for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -27,10 +27,6 @@
 
 using namespace utest::v1;
 
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
-
 #define TEST_DELAY_US 50000ULL
 #define DELTA         2
 
@@ -246,3 +242,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_USTICKER

TESTS/mbed_drivers/watchdog/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_WATCHDOG
 #error [NOT_SUPPORTED] Watchdog not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -282,3 +282,5 @@ int main()
     // Harness will start with a test case index provided by host script.
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_WATCHDOG

TESTS/mbed_drivers/watchdog_reset/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_WATCHDOG
 #error [NOT_SUPPORTED] Watchdog not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "utest/utest.h"
@@ -319,3 +319,4 @@ int main()
     // Harness will start with a test case index provided by host script.
     return !Harness::run(specification);
 }
+#endif // !DEVICE_WATCHDOG

TESTS/mbed_hal/common_tickers/main.cpp

@@ -32,7 +32,7 @@ extern "C" {
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 #define US_PER_S 1000000
 
@@ -605,3 +605,4 @@ int main()
 {
     return !Harness::run(specification);
 }
+#endif // !DEVICE_USTICKER

TESTS/mbed_hal/common_tickers_freq/main.cpp

@@ -30,13 +30,9 @@
 #include "hal/lp_ticker_api.h"
 #include "hal/mbed_lp_ticker_wrapper.h"
 
-#if defined(SKIP_TIME_DRIFT_TESTS)
+#if defined(SKIP_TIME_DRIFT_TESTS) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 #define US_PER_S 1000000
 
@@ -208,3 +204,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // defined(SKIP_TIME_DRIFT_TESTS) || !DEVICE_USTICKER

TESTS/mbed_hal/crc/main.cpp

@@ -22,7 +22,7 @@
 
 #if !DEVICE_CRC
 #error [NOT_SUPPORTED] CRC not supported for this target
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -280,3 +280,5 @@ int main()
 
     Harness::run(specification);
 }
+
+#endif // !DEVICE_CRC

TESTS/mbed_hal/flash/functional_tests/main.cpp

@@ -16,7 +16,7 @@
 
 #if !DEVICE_FLASH
 #error [NOT_SUPPORTED] Flash API not supported for this target
-#endif
+#else
 
 #include "utest/utest.h"
 #include "unity/unity.h"
@@ -280,3 +280,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif !DEVICE_FLASH

TESTS/mbed_hal/lp_ticker/main.cpp

@@ -24,7 +24,7 @@
 
 #if !DEVICE_LPTICKER
 #error [NOT_SUPPORTED] Low power timer not supported for this target
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -204,3 +204,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_LPTICKER

TESTS/mbed_hal/mpu/main.cpp

@@ -26,7 +26,7 @@
 
 #if !DEVICE_MPU
 #error [NOT_SUPPORTED] MPU API not supported for this target
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -197,3 +197,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_MPU

TESTS/mbed_hal/qspi/main.cpp

@@ -16,7 +16,7 @@
 
 #if !DEVICE_QSPI
 #error [NOT_SUPPORTED] QSPI not supported for this target
-#endif
+#else
 
 #include "utest/utest.h"
 #include "unity/unity.h"
@@ -30,7 +30,7 @@
 
 #if !defined(QSPI_FLASH_CHIP_STRING)
 #error [NOT_SUPPORTED] QSPI test not supported for this target
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -602,3 +602,5 @@ int main()
     Harness::run(specification);
 }
 
+#endif // !defined(QSPI_FLASH_CHIP_STRING)
+#endif // !DEVICE_QSPI

TESTS/mbed_hal/reset_reason/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_RESET_REASON
 #error [NOT_SUPPORTED] Reset reason API not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -148,3 +148,5 @@ int main()
     test_reset_reason(); // The result of this test suite is reported by the host side.
     GREENTEA_TESTSUITE_RESULT(0); // Fail on any error.
 }
+
+#endif //!DEVICE_RESET_REASON

TESTS/mbed_hal/rtc/main.cpp

@@ -16,7 +16,7 @@
 
 #if !DEVICE_RTC
 #error [NOT_SUPPORTED] RTC API not supported for this target
-#endif
+#else
 
 #include "utest/utest.h"
 #include "unity/unity.h"
@@ -258,3 +258,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_RTC

TESTS/mbed_hal/rtc_reset/main.cpp

@@ -16,7 +16,7 @@
 
 #if !DEVICE_RTC
 #error [NOT_SUPPORTED] RTC API not supported for this target
-#endif
+#else
 
 #include "utest/utest.h"
 #include "unity/unity.h"
@@ -100,3 +100,5 @@ int main()
 {
     rtc_reset_test();
 }
+
+#endif // !DEVICE_RTC

TESTS/mbed_hal/sleep/main.cpp

@@ -16,7 +16,7 @@
 
 #if !DEVICE_SLEEP
 #error [NOT_SUPPORTED] sleep not supported for this target
-#endif
+#else
 
 #include "mbed.h"
 
@@ -260,3 +260,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_SLEEP

TESTS/mbed_hal/sleep_manager/main.cpp

@@ -24,7 +24,7 @@
 
 #if !DEVICE_SLEEP
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 #define SLEEP_DURATION_US 20000ULL
 #define DEEP_SLEEP_TEST_CHECK_WAIT_US 2000
@@ -333,3 +333,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_SLEEP

TESTS/mbed_hal/sleep_manager_racecondition/main.cpp

@@ -19,13 +19,9 @@
 #include "mbed.h"
 #include "sleep_manager_api_racecondition_tests.h"
 
-#if !DEVICE_SLEEP
+#if !DEVICE_SLEEP || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using namespace utest::v1;
 
@@ -105,3 +101,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !DEVICE_SLEEP || !DEVICE_USTICKER

TESTS/mbed_hal/spm/main.cpp

@@ -17,15 +17,15 @@
 
 #if !defined(COMPONENT_PSA_SRV_IPC)
 #error [NOT_SUPPORTED] Test supported only on PSA targets
-#endif
+#else
 
 #if (defined( __CC_ARM ) || defined(__ARMCC_VERSION) || defined( __ICCARM__ ))
 #error [NOT_SUPPORTED] this test is supported on GCC only
-#endif
+#else
 
 #if DOMAIN_NS == 1
 #error [NOT_SUPPORTED] Cannot run on M23/M33 core as SecureFault is implemented in secure-side and cant be remapped
-#endif
+#else
 
 #include "utest/utest.h"
 #include "unity/unity.h"
@@ -156,3 +156,7 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // DOMAIN_NS == 1
+#endif // (defined( __CC_ARM ) || defined(__ARMCC_VERSION) || defined( __ICCARM__ ))
+#endif // !defined(COMPONENT_PSA_SRV_IPC)

TESTS/mbed_hal/stack_size_unification/main.cpp

@@ -22,7 +22,7 @@
 
 #ifdef TARGET_RENESAS
 #error [NOT_SUPPORTED] Cortex-A target not supported for this test
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -74,3 +74,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#else // TARGET_RENESAS

TESTS/mbed_hal/trng/main.cpp

@@ -48,7 +48,7 @@
 
 #if !DEVICE_TRNG
 #error [NOT_SUPPORTED] TRNG API not supported for this target
-#endif
+#else
 
 #define MSG_VALUE_DUMMY                 "0"
 #define MSG_VALUE_LEN                   64
@@ -284,5 +284,5 @@ int main()
     return ret;
 }
 
-
+#endif // !DEVICE_TRNG
 

TESTS/mbed_hal/us_ticker/main.cpp

@@ -22,7 +22,7 @@
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -57,3 +57,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_USTICKER

TESTS/mbed_hal/watchdog/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_WATCHDOG
 #error [NOT_SUPPORTED] Watchdog not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "hal/watchdog_api.h"
@@ -283,3 +283,5 @@ int main()
     // Harness will start with a test case index provided by host script.
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_WATCHDOG

TESTS/mbed_hal/watchdog_reset/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_WATCHDOG
 #error [NOT_SUPPORTED] Watchdog not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "utest/utest.h"
@@ -305,3 +305,5 @@ int main()
     // Harness will start with a test case index provided by host script.
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_WATCHDOG

TESTS/mbed_hal/watchdog_timing/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !DEVICE_WATCHDOG
 #error [NOT_SUPPORTED] Watchdog not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "hal/watchdog_api.h"
@@ -160,3 +160,5 @@ int main()
     // Harness will start with a test case index provided by host script.
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_WATCHDOG

TESTS/mbed_platform/atomic/main.cpp

@@ -20,7 +20,7 @@
 
 #if !MBED_CONF_RTOS_PRESENT
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 #define THREAD_STACK 512
 
@@ -275,3 +275,5 @@ int main()
 {
     return !utest::v1::Harness::run(specification);
 }
+
+#endif // !MBED_CONF_RTOS_PRESENT

TESTS/mbed_platform/crash_reporting/main.cpp

@@ -21,7 +21,7 @@
 
 #if !MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED
 #error [NOT_SUPPORTED] crash_reporting test not supported
-#endif
+#else
 
 #define MSG_VALUE_DUMMY "0"
 #define MSG_VALUE_LEN 32
@@ -78,3 +78,5 @@ int main(void)
 
     return 0;
 }
+
+#endif // !MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED

TESTS/mbed_platform/stats_cpu/main.cpp

@@ -23,7 +23,7 @@
 
 #if !defined(MBED_CPU_STATS_ENABLED) || !DEVICE_LPTICKER || !DEVICE_SLEEP
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -110,3 +110,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !defined(MBED_CPU_STATS_ENABLED) || !DEVICE_LPTICKER || !DEVICE_SLEEP

TESTS/mbed_platform/stats_heap/main.cpp

@@ -24,7 +24,7 @@
 
 #if !defined(MBED_HEAP_STATS_ENABLED)
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -207,3 +207,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !defined(MBED_HEAP_STATS_ENABLED)

TESTS/mbed_platform/stats_sys/main.cpp

@@ -23,7 +23,7 @@
 
 #if !defined(MBED_SYS_STATS_ENABLED)
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -105,3 +105,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !defined(MBED_SYS_STATS_ENABLED)

TESTS/mbed_platform/stats_thread/main.cpp

@@ -23,7 +23,7 @@
 
 #if !defined(MBED_THREAD_STATS_ENABLED)
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -174,3 +174,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !defined(MBED_THREAD_STATS_ENABLED)

TESTS/mbed_platform/wait_ns/main.cpp

@@ -26,7 +26,7 @@
 //FastModels not support timing test
 #if defined(TARGET_ARM_FM)
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -99,3 +99,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(TARGET_ARM_FM)

TESTS/mbedmicro-rtos-mbed/basic/main.cpp

@@ -19,17 +19,9 @@
 #include "utest/utest.h"
 #include "unity/unity.h"
 
-#if defined(SKIP_TIME_DRIFT_TESTS)
+#if defined(SKIP_TIME_DRIFT_TESTS) || defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if defined(MBED_RTOS_SINGLE_THREAD)
-#error [NOT_SUPPORTED] test not supported
-#endif
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using utest::v1::Case;
 
@@ -123,3 +115,5 @@ int main()
 {
     utest::v1::Harness::run(specification);
 }
+
+#endif // defined(SKIP_TIME_DRIFT_TESTS) || defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/condition_variable/main.cpp

@@ -19,13 +19,9 @@
 #include "utest.h"
 #include "rtos.h"
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using namespace utest::v1;
 
@@ -188,3 +184,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/event_flags/main.cpp

@@ -22,13 +22,9 @@
 
 using utest::v1::Case;
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 #if defined(__CORTEX_M23) || defined(__CORTEX_M33)
 #define THREAD_STACK_SIZE   512
@@ -374,3 +370,5 @@ int main()
 {
     return !utest::v1::Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/heap_and_stack/main.cpp

@@ -15,13 +15,9 @@
  * limitations under the License.
  */
 
-#if defined(TARGET_CORTEX_A)
+#if defined(TARGET_CORTEX_A) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] This function not supported for this target
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -266,3 +262,5 @@ int main()
 {
     return !utest::v1::Harness::run(specification);
 }
+
+#endif // defined(TARGET_CORTEX_A) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/mail/main.cpp

@@ -19,13 +19,9 @@
 #include "utest.h"
 #include "rtos.h"
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using namespace utest::v1;
 
@@ -512,3 +508,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/malloc/main.cpp

@@ -19,13 +19,9 @@
 #include "unity/unity.h"
 
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using utest::v1::Case;
 
@@ -221,3 +217,5 @@ int main()
 {
     return !utest::v1::Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/mutex/main.cpp

@@ -19,13 +19,9 @@
 #include "utest.h"
 #include "rtos.h"
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using namespace utest::v1;
 
@@ -308,3 +304,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/queue/main.cpp

@@ -19,13 +19,9 @@
 #include "utest.h"
 #include "rtos.h"
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 using namespace utest::v1;
 
@@ -348,3 +344,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/rtostimer/main.cpp

@@ -28,11 +28,11 @@ using namespace utest::v1;
 
 #if RESTART_DELAY_MS >= DELAY_MS
 #error invalid RESTART_DELAY_MS value
-#endif
+#else
 
 #if !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
 
 class Stopwatch: public Timer {
 private:
@@ -357,3 +357,6 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !DEVICE_USTICKER
+#endif // RESTART_DELAY_MS >= DELAY_MS

TESTS/mbedmicro-rtos-mbed/semaphore/main.cpp

@@ -21,13 +21,9 @@
 
 using namespace utest::v1;
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 #define THREAD_DELAY     30
 #define SEMAPHORE_SLOTS  2
@@ -249,3 +245,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/signals/main.cpp

@@ -20,13 +20,9 @@
 
 using utest::v1::Case;
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 #define TEST_STACK_SIZE   512
 #define MAX_FLAG_POS 30
@@ -396,3 +392,5 @@ int main()
 {
     return !utest::v1::Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/mbedmicro-rtos-mbed/threads/main.cpp

@@ -21,13 +21,9 @@
 #include "SynchronizedIntegral.h"
 #include "LockGuard.h"
 
-#if defined(MBED_RTOS_SINGLE_THREAD)
+#if defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER
 #error [NOT_SUPPORTED] test not supported
-#endif
+#else
-
-#if !DEVICE_USTICKER
-#error [NOT_SUPPORTED] test not supported
-#endif
 
 #define THREAD_STACK_SIZE 512
 #if defined(__CORTEX_A9)
@@ -854,3 +850,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(MBED_RTOS_SINGLE_THREAD) || !DEVICE_USTICKER

TESTS/netsocket/dns/main.cpp

@@ -19,7 +19,7 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -199,3 +199,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))

TESTS/netsocket/tcp/main.cpp

@@ -19,7 +19,7 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -30,7 +30,7 @@
 
 #ifndef ECHO_SERVER_ADDR
 #error [NOT_SUPPORTED] Requires parameters for echo server
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -237,3 +237,6 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // ECHO_SERVER_ADDR
+#endif // !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))

TESTS/netsocket/tls/main.cpp

@@ -19,7 +19,7 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -30,7 +30,7 @@
 
 #ifndef ECHO_SERVER_ADDR
 #error [NOT_SUPPORTED] Requires parameters for echo server
-#endif
+#else
 
 #if defined(MBEDTLS_SSL_CLI_C) || defined(DOXYGEN_ONLY)
 
@@ -276,3 +276,6 @@ int main()
 #else
 #error [NOT_SUPPORTED] This device does not support SSL library
 #endif // defined(MBEDTLS_SSL_CLI_C) || defined(DOXYGEN_ONLY)
+
+#endif // ECHO_SERVER_ADDR
+#endif // !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))

TESTS/netsocket/udp/main.cpp

@@ -19,7 +19,7 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -30,7 +30,7 @@
 
 #ifndef ECHO_SERVER_ADDR
 #error [NOT_SUPPORTED] Requires parameters for echo server
-#endif
+#else
 
 using namespace utest::v1;
 
@@ -201,3 +201,6 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // ECHO_SERVER_ADDR
+#endif // !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))

TESTS/network/emac/main.cpp

@@ -19,7 +19,7 @@
     !defined(MBED_CONF_APP_ECHO_SERVER_TRACE) || \
     !defined(MBED_CONF_APP_WIFI_SCAN)
 #error [NOT_SUPPORTED] Requires parameters from mbed_app.json
-#endif
+#else
 
 #define ETHERNET 1
 #define WIFI 2
@@ -27,10 +27,10 @@
 #if MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != ETHERNET && \
     MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != WIFI
 #error [NOT_SUPPORTED] Either wifi or ethernet testing need to be enabled
-#endif
+#else
 
-#if MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI
+#if (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI) && \
-#if !defined(TARGET_UBLOX_EVK_ODIN_W2)      && \
+    !defined(TARGET_UBLOX_EVK_ODIN_W2)      && \
     !defined(TARGET_REALTEK_RTL8195AM)      && \
     !defined(TARGET_MTB_ADV_WISE_1530)      && \
     !defined(TARGET_MTB_USI_WM_BN_BM_22)    && \
@@ -38,8 +38,9 @@
     !defined(TARGET_MTB_UBLOX_ODIN_W2)      && \
     !defined(TARGET_UNO_91H)
 #error [NOT_SUPPORTED] Wifi tests are not valid for the target
-#endif
+#else
-#endif
+
+
 
 #include "greentea-client/test_env.h"
 #include "unity.h"
@@ -82,3 +83,14 @@ int main()
     return !Harness::run(specification);
 }
 
+#endif // (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI) && \
+            !defined(TARGET_UBLOX_EVK_ODIN_W2)      && \
+            !defined(TARGET_REALTEK_RTL8195AM)      && \
+            !defined(TARGET_MTB_ADV_WISE_1530)      && \
+            !defined(TARGET_MTB_USI_WM_BN_BM_22)    && \
+            !defined(TARGET_MTB_MXCHIP_EMW3166)     && \
+            !defined(TARGET_MTB_UBLOX_ODIN_W2)      && \
+            !defined(TARGET_UNO_91H)
+
+#endif // MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != ETHERNET && MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != WIFI
+#endif // !defined(MBED_CONF_APP_ECHO_SERVER) || !defined(MBED_CONF_APP_ECHO_SERVER_TRACE) || !defined(MBED_CONF_APP_WIFI_SCAN)

TESTS/network/interface/main.cpp

@@ -19,7 +19,7 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -54,3 +54,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))

TESTS/network/multihoming/main.cpp

@@ -19,15 +19,15 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 #ifndef MBED_CONF_APP_ECHO_SERVER_ADDR
 #error [NOT_SUPPORTED] Requires parameters from mbed_app.json
-#endif
+#else
 
 #if !defined(DEVICE_EMAC) || \
     (!defined(MBED_CONF_APP_WIFI_SECURE_SSID) && !defined(MBED_CONF_APP_WIFI_UNSECURE_SSID))
 #error [NOT_SUPPORTED] Both Wifi and Ethernet devices are required for multihoming tests.
-#endif
+#else
 
 #define STRING_VERIFY(str) (str != NULL ? str : "not supported")
 
@@ -164,3 +164,7 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !defined(DEVICE_EMAC) || (!defined(MBED_CONF_APP_WIFI_SECURE_SSID) && !defined(MBED_CONF_APP_WIFI_UNSECURE_SSID))
+#endif // MBED_CONF_APP_ECHO_SERVER_ADDR
+#endif // !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == WIFI && !defined(MBED_CONF_NSAPI_DEFAULT_WIFI_SSID))

TESTS/network/wifi/get_interface.cpp

@@ -19,10 +19,10 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != WIFI
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 #if !defined(MBED_CONF_APP_WIFI_SECURE_SSID) && !defined(MBED_CONF_APP_WIFI_UNSECURE_SSID)
 #error [NOT_SUPPORTED] Requires parameters from mbed_app.json
-#endif
+#else
 
 #include "mbed.h"
 #include "WiFiInterface.h"
@@ -40,3 +40,5 @@ WiFiInterface *get_interface()
 
     return interface;
 }
+#endif //!defined(MBED_CONF_APP_WIFI_SECURE_SSID) && !defined(MBED_CONF_APP_WIFI_UNSECURE_SSID)
+#endif //!defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != WIFI

TESTS/network/wifi/main.cpp

@@ -19,7 +19,7 @@
 #if !defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || \
     MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != WIFI
 #error [NOT_SUPPORTED] No network configuration found for this target.
-#endif
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -28,25 +28,24 @@
 #include "wifi_tests.h"
 
 // Test for parameters
-#if defined(MBED_CONF_APP_WIFI_SECURE_SSID)
+#if defined(MBED_CONF_APP_WIFI_SECURE_SSID) &&    \
-#if !defined(MBED_CONF_APP_AP_MAC_SECURE)      || \
+   (!defined(MBED_CONF_APP_AP_MAC_SECURE)      || \
     !defined(MBED_CONF_APP_MAX_SCAN_SIZE)      || \
     !defined(MBED_CONF_APP_WIFI_CH_SECURE)     || \
     !defined(MBED_CONF_APP_WIFI_PASSWORD)      || \
     !defined(MBED_CONF_APP_WIFI_SECURE_SSID)   || \
-    !defined MBED_CONF_APP_WIFI_SECURE_PROTOCOL
+    !defined MBED_CONF_APP_WIFI_SECURE_PROTOCOL)
 #error [NOT_SUPPORTED] Requires parameters from mbed_app.json (for secure connections)
-#endif
+#else
-#endif // defined(MBED_CONF_APP_WIFI_SECURE_SSID)
 
-#if defined(MBED_CONF_APP_WIFI_UNSECURE_SSID)
+#if defined(MBED_CONF_APP_WIFI_UNSECURE_SSID) &&  \
-#if !defined(MBED_CONF_APP_AP_MAC_UNSECURE)    || \
+    !defined(MBED_CONF_APP_AP_MAC_UNSECURE)    || \
     !defined(MBED_CONF_APP_MAX_SCAN_SIZE)      || \
     !defined(MBED_CONF_APP_WIFI_CH_UNSECURE)   || \
     !defined(MBED_CONF_APP_WIFI_UNSECURE_SSID)
 #error [NOT_SUPPORTED] Requires parameters from mbed_app.json (for unsecure connections)
-#endif
+#else
-#endif // defined(MBED_CONF_APP_WIFI_UNSECURE_SSID)
+
 
 using namespace utest::v1;
 
@@ -93,3 +92,18 @@ int main()
 {
     return !Harness::run(specification);
 }
+#endif // defined(MBED_CONF_APP_WIFI_UNSECURE_SSID) &&  \
+    !defined(MBED_CONF_APP_AP_MAC_UNSECURE)    || \
+    !defined(MBED_CONF_APP_MAX_SCAN_SIZE)      || \
+    !defined(MBED_CONF_APP_WIFI_CH_UNSECURE)   || \
+    !defined(MBED_CONF_APP_WIFI_UNSECURE_SSID)
+
+#endif // defined(MBED_CONF_APP_WIFI_SECURE_SSID) && \
+   (!defined(MBED_CONF_APP_AP_MAC_SECURE)      || \
+    !defined(MBED_CONF_APP_MAX_SCAN_SIZE)      || \
+    !defined(MBED_CONF_APP_WIFI_CH_SECURE)     || \
+    !defined(MBED_CONF_APP_WIFI_PASSWORD)      || \
+    !defined(MBED_CONF_APP_WIFI_SECURE_SSID)   || \
+    !defined MBED_CONF_APP_WIFI_SECURE_PROTOCOL)
+    
+#endif //!defined(MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE) || MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE != WIFI

TESTS/nfc/eeprom/main.cpp

@@ -25,7 +25,7 @@
 
 #if !MBED_CONF_NFCEEPROM
 #error [NOT_SUPPORTED] NFC EEPROM not supported for this target
-#endif
+#else
 
 using namespace utest::v1;
 using namespace mbed::nfc;
@@ -497,3 +497,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !MBED_CONF_NFCEEPROM

TESTS/psa/attestation/main.cpp

@@ -20,7 +20,7 @@
 
 #if ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)))
 #error [NOT_SUPPORTED] Mbed Crypto is OFF - skipping.
-#endif // TARGET_PSA
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -156,3 +156,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)))

TESTS/psa/crypto_access_control/COMPONENT_NSPE/main.cpp

@@ -19,7 +19,7 @@
 
 #if ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)) || (!defined(COMPONENT_PSA_SRV_IPC)))
 #error [NOT_SUPPORTED] These tests can run only on SPM-enabled targets and where Mbed Crypto is ON - skipping.
-#endif
+#else
 
 #include <stdio.h>
 #include "mbed.h"
@@ -594,3 +594,5 @@ int main(void)
 {
     return !Harness::run(specification);
 }
+
+#endif // ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)) || (!defined(COMPONENT_PSA_SRV_IPC)))

TESTS/psa/crypto_init/main.cpp

@@ -20,7 +20,7 @@
 
 #if ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)))
 #error [NOT_SUPPORTED] Mbed Crypto is OFF - skipping.
-#endif // TARGET_PSA
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -112,3 +112,5 @@ int main()
 #endif
     return !Harness::run(specification);
 }
+
+#endif // ((!defined(TARGET_PSA)) || (!defined(MBEDTLS_PSA_CRYPTO_C)))

TESTS/psa/entropy_inject/main.cpp

@@ -18,7 +18,7 @@
 
 #if ((!defined(TARGET_PSA) || (!defined(COMPONENT_PSA_SRV_IPC)) && !defined(MBEDTLS_ENTROPY_NV_SEED)))
 #error [NOT_SUPPORTED] PSA entropy injection tests can run only on PSA-enabled targets.
-#endif // TARGET_PSA
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -182,3 +182,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // ((!defined(TARGET_PSA) || (!defined(COMPONENT_PSA_SRV_IPC)) && !defined(MBEDTLS_ENTROPY_NV_SEED)))

TESTS/psa/its_ps/main.cpp

@@ -18,7 +18,7 @@
 
 #ifndef TARGET_PSA
 #error [NOT_SUPPORTED] ITS/PS tests can run only on PSA-enabled targets.
-#endif // TARGET_PSA
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity/unity.h"
@@ -196,3 +196,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // TARGET_PSA

TESTS/psa/spm_client/COMPONENT_NSPE/main.cpp

@@ -17,7 +17,7 @@
 
 #ifndef COMPONENT_PSA_SRV_IPC
 #error [NOT_SUPPORTED] SPM tests can run only on SPM-enabled targets
-#endif // COMPONENT_PSA_SRV_IPC
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -486,3 +486,5 @@ int main()
     Harness::run(specification);
     return 0;
 }
+
+#endif // COMPONENT_PSA_SRV_IPC

TESTS/psa/spm_server/COMPONENT_NSPE/main.cpp

@@ -17,7 +17,7 @@
 
 #ifndef COMPONENT_PSA_SRV_IPC
 #error [NOT_SUPPORTED] SPM tests can run only on SPM-enabled targets
-#endif // COMPONENT_PSA_SRV_IPC
+#else
 
 #include "mbed.h"
 #include "greentea-client/test_env.h"
@@ -275,3 +275,5 @@ int main(int, char **)
     Harness::run(specification);
     return 0;
 }
+
+#endif // COMPONENT_PSA_SRV_IPC

TESTS/psa/spm_smoke/COMPONENT_NSPE/main.cpp

@@ -18,7 +18,7 @@
 
 #ifndef COMPONENT_PSA_SRV_IPC
 #error [NOT_SUPPORTED] SPM tests can run only on SPM-enabled targets
-#endif // COMPONENT_PSA_SRV_IPC
+#else
 
 /* -------------------------------------- Includes ----------------------------------- */
 
@@ -91,3 +91,5 @@ int main(int, char **)
     Harness::run(specification);
     return 0;
 }
+
+#endif // COMPONENT_PSA_SRV_IPC

TESTS/usb_device/basic/main.cpp

@@ -40,7 +40,7 @@
 
 #if !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE
 #error [NOT_SUPPORTED] USB Device not supported for this target
-#endif
+#else
 
 
 using namespace utest::v1;
@@ -658,3 +658,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE

TESTS/usb_device/hid/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE
 #error [NOT_SUPPORTED] USB Device not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "utest/utest.h"
@@ -382,3 +382,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE

TESTS/usb_device/msd/main.cpp

@@ -31,7 +31,7 @@
 
 #if !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE
 #error [NOT_SUPPORTED] USB Device not supported for this target
-#endif
+#else
 
 
 #define OS_WINDOWS  1
@@ -480,3 +480,5 @@ int main()
 {
     Harness::run(specification);
 }
+
+#endif // !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE

TESTS/usb_device/serial/main.cpp

@@ -16,7 +16,7 @@
  */
 #if !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE
 #error [NOT_SUPPORTED] USB Device not supported for this target
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "utest/utest.h"
@@ -845,3 +845,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // !defined(DEVICE_USBDEVICE) || !DEVICE_USBDEVICE

components/storage/blockdevice/COMPONENT_SD/TESTS/filesystem/fopen/fopen.cpp

@@ -68,7 +68,9 @@ using namespace utest::v1;
  *      <<< lines removed >>>
  */
 
-#if DEVICE_SPI && ( defined(MBED_CONF_APP_FSFAT_SDCARD_INSTALLED) || (MBED_CONF_SD_FSFAT_SDCARD_INSTALLED))
+#if !(DEVICE_SPI && ( defined(MBED_CONF_APP_FSFAT_SDCARD_INSTALLED) || (MBED_CONF_SD_FSFAT_SDCARD_INSTALLED)))
+#error [NOT_SUPPORTED] DEVICE_SPI need to be enabled for this test. SDcard need to be installed for this test.
+#else
 static char fsfat_fopen_utest_msg_g[FSFAT_UTEST_MSG_BUF_SIZE];
 #define FSFAT_FOPEN_TEST_MOUNT_PT_NAME      "sd"
 #define FSFAT_FOPEN_TEST_MOUNT_PT_PATH      "/" FSFAT_FOPEN_TEST_MOUNT_PT_NAME
@@ -1553,54 +1555,6 @@ control_t fsfat_fopen_test_16(const size_t call_count)
     return CaseNext;
 }
 
-
-#else
-
-#define FSFAT_FOPEN_TEST_00      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_01      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_02      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_03      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_04      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_05      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_06      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_07      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_08      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_09      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_10      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_11      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_12      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_13      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_14      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_15      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_16      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_17      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_18      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_19      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_20      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_21      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_22      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_23      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_24      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_25      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_26      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_27      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_28      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_29      fsfat_fopen_test_dummy
-#define FSFAT_FOPEN_TEST_30      fsfat_fopen_test_dummy
-
-/** @brief  fsfat_fopen_test_dummy    Dummy test case for testing when platform doesnt have an SDCard installed.
- *
- * @return success always
- */
-static control_t fsfat_fopen_test_dummy()
-{
-    printf("Null test\n");
-    return CaseNext;
-}
-
-#endif
-
-
 /// @cond FSFAT_DOXYGEN_DISABLE
 utest::v1::status_t greentea_setup(const size_t number_of_cases)
 {
@@ -1641,3 +1595,4 @@ int main()
     return !Harness::run(specification);
 }
 /// @endcond
+#endif // !(DEVICE_SPI && ( defined(MBED_CONF_APP_FSFAT_SDCARD_INSTALLED) || (MBED_CONF_SD_FSFAT_SDCARD_INSTALLED)))

features/FEATURE_BLE/targets/TARGET_CORDIO/TESTS/cordio_hci/transport/main.cpp

@@ -35,7 +35,7 @@ extern ble::vendor::cordio::CordioHCIDriver& ble_cordio_get_hci_driver();
 
 #if CORDIO_ZERO_COPY_HCI
 #error [NOT_SUPPORTED] Test not relevant for zero copy hci.
-#endif
+#else
 
 namespace ble {
 namespace vendor {
@@ -270,3 +270,4 @@ Specification specification(greentea_test_setup, cases, greentea_test_teardown_h
 int main() {
     return !Harness::run(specification);
 }
+#endif // CORDIO_ZERO_COPY_HCI

features/cellular/TESTS/api/cellular_device/main.cpp

@@ -15,13 +15,10 @@
  * limitations under the License.
  */
 
-#if !defined(MBED_CONF_NSAPI_PRESENT)
+#if !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)
-#error [NOT_SUPPORTED] A json configuration file is needed. Skipping this build.
+#error [NOT_SUPPORTED] A json configuration file is needed & SIM pin code is needed. Skipping this build.
-#endif
+#else
 
-#ifndef MBED_CONF_APP_CELLULAR_SIM_PIN
-#error [NOT_SUPPORTED] SIM pin code is needed. Skipping this build.
-#endif
 
 #include "greentea-client/test_env.h"
 #include "unity.h"
@@ -221,3 +218,4 @@ int main()
     return ret;
 }
 
+#endif !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)

features/cellular/TESTS/api/cellular_information/main.cpp

@@ -16,16 +16,12 @@
  */
 
 
-#if !defined(MBED_CONF_NSAPI_PRESENT)
+#if !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)
-#error [NOT_SUPPORTED] A json configuration file is needed. Skipping this build.
+#error [NOT_SUPPORTED] A json configuration file is needed & SIM pin code is needed. Skipping this build.
-#endif
+#else
 
 #include "CellularUtil.h" // for CELLULAR_ helper macros
 
-#ifndef MBED_CONF_APP_CELLULAR_SIM_PIN
-#error [NOT_SUPPORTED] SIM pin code is needed. Skipping this build.
-#endif
-
 #include "greentea-client/test_env.h"
 #include "unity.h"
 #include "utest.h"
@@ -118,3 +114,4 @@ int main()
 #endif
     return ret;
 }
+#endif // !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)

features/cellular/TESTS/api/cellular_network/main.cpp

@@ -16,13 +16,9 @@
  */
 
 
-#if !defined(MBED_CONF_NSAPI_PRESENT)
+#if !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)
-#error [NOT_SUPPORTED] A json configuration file is needed. Skipping this build.
+#error [NOT_SUPPORTED] A json configuration file is needed & SIM pin code is needed. Skipping this build.
-#endif
+#else
-
-#ifndef MBED_CONF_APP_CELLULAR_SIM_PIN
-#error [NOT_SUPPORTED] SIM pin code is needed. Skipping this build.
-#endif
 
 #include "greentea-client/test_env.h"
 #include "unity.h"
@@ -252,3 +248,4 @@ int main()
 #endif
     return ret;
 }
+#endif // !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)

features/cellular/TESTS/api/cellular_sms/main.cpp

@@ -16,17 +16,13 @@
  */
 
 
-#if !defined(MBED_CONF_NSAPI_PRESENT)
+#if !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)
-#error [NOT_SUPPORTED] A json configuration file is needed. Skipping this build.
+#error [NOT_SUPPORTED] A json configuration file is needed & SIM pin code is needed. Skipping this build.
-#endif
+#else
-
-#ifndef MBED_CONF_APP_CELLULAR_SIM_PIN
-#error [NOT_SUPPORTED] SIM pin code is needed. Skipping this build.
-#endif
 
 #if defined(TARGET_ADV_WISE_1570) || defined(TARGET_MTB_ADV_WISE_1570)
 #error [NOT_SUPPORTED] target MTB_ADV_WISE_1570 does not have SMS functionality
-#endif
+#else
 
 #include "greentea-client/test_env.h"
 #include "unity.h"
@@ -260,3 +256,6 @@ int main()
 #endif
     return ret;
 }
+
+#endif //defined(TARGET_ADV_WISE_1570) || defined(TARGET_MTB_ADV_WISE_1570)
+#endif // !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)

features/cellular/TESTS/socket/udp/main.cpp

@@ -15,16 +15,12 @@
  * limitations under the License.
  */
 
-#if !defined(MBED_CONF_NSAPI_PRESENT)
+#if !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)
-#error [NOT_SUPPORTED] A json configuration file is needed. Skipping this build.
+#error [NOT_SUPPORTED] A json configuration file is needed & SIM pin code is needed. Skipping this build.
-#endif
+#else
 
 #include "CellularUtil.h" // for CELLULAR_ helper macros
 
-#ifndef MBED_CONF_APP_CELLULAR_SIM_PIN
-#error [NOT_SUPPORTED] SIM pin code is needed. Skipping this build.
-#endif
-
 #include "greentea-client/test_env.h"
 #include "unity.h"
 #include "utest.h"
@@ -218,3 +214,4 @@ int main()
 #endif
     return ret;
 }
+#endif // !defined(MBED_CONF_NSAPI_PRESENT) || !defined(MBED_CONF_APP_CELLULAR_SIM_PIN)

features/device_key/TESTS/device_key/functionality/main.cpp

@@ -29,7 +29,7 @@ using namespace mbed;
 
 #if !DEVICEKEY_ENABLED
 #error [NOT_SUPPORTED] DeviceKey needs to be enabled for this test
-#endif
+#else
 
 #define MSG_VALUE_DUMMY "0"
 #define MSG_VALUE_LEN 32
@@ -499,3 +499,4 @@ int main()
     return ret;
 }
 
+#endif // !DEVICEKEY_ENABLED

features/storage/TESTS/blockdevice/heap_block_device/main.cpp

@@ -26,7 +26,7 @@ using namespace utest::v1;
 // TODO HACK, replace with available ram/heap property
 #if defined(TARGET_MTB_MTS_XDOT)
 #error [NOT_SUPPORTED] Insufficient heap for heap block device tests
-#endif
+#else
 
 #define TEST_BLOCK_SIZE 128
 #define TEST_BLOCK_DEVICE_SIZE 32*TEST_BLOCK_SIZE
@@ -186,3 +186,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(TARGET_MTB_MTS_XDOT)

features/storage/TESTS/blockdevice/mbr_block_device/main.cpp

@@ -27,7 +27,7 @@ using namespace utest::v1;
 // TODO HACK, replace with available ram/heap property
 #if defined(TARGET_MTB_MTS_XDOT)
 #error [NOT_SUPPORTED] Insufficient heap for heap block device tests
-#endif
+#else
 
 #define BLOCK_COUNT 16
 #define BLOCK_SIZE 512
@@ -250,3 +250,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(TARGET_MTB_MTS_XDOT)

features/storage/TESTS/blockdevice/util_block_device/main.cpp

@@ -29,7 +29,7 @@ using namespace utest::v1;
 // TODO HACK, replace with available ram/heap property
 #if defined(TARGET_MTB_MTS_XDOT)
 #error [NOT_SUPPORTED] Insufficient heap for heap block device tests
-#endif
+#else
 
 #define BLOCK_COUNT 16
 #define BLOCK_SIZE 512
@@ -308,3 +308,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // defined(TARGET_MTB_MTS_XDOT)

features/storage/TESTS/filesystem/fat_filesystem/main.cpp

@@ -27,7 +27,7 @@ using namespace utest::v1;
 
 #ifndef MBED_EXTENDED_TESTS
 #error [NOT_SUPPORTED] Filesystem tests not supported by default
-#endif
+#else
 
 static const int mem_alloc_threshold = 32 * 1024;
 
@@ -189,3 +189,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // MBED_EXTENDED_TESTS

features/storage/TESTS/filesystem/general_filesystem/main.cpp

@@ -30,6 +30,7 @@
 #error [NOT_SUPPORTED] storage test not supported on this platform
 #endif
 
+#if COMPONENT_SPIF || COMPONENT_SD
 using namespace utest::v1;
 using namespace mbed;
 
@@ -2105,3 +2106,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // COMPONENT_SPIF || COMPONENT_SD

features/storage/TESTS/filesystem/multipart_fat_filesystem/main.cpp

@@ -29,7 +29,7 @@ using namespace utest::v1;
 
 #ifndef MBED_EXTENDED_TESTS
 #error [NOT_SUPPORTED] Filesystem tests not supported by default
-#endif
+#else
 
 static const int mem_alloc_threshold = 32 * 1024;
 
@@ -304,3 +304,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // MBED_EXTENDED_TESTS

features/storage/TESTS/kvstore/direct_access_devicekey_test/main.cpp

@@ -17,7 +17,7 @@
 
 #ifndef COMPONENT_FLASHIAP
 #error [NOT_SUPPORTED] Target must have internal FlashIAP for this test
-#endif
+#else
 
 #include "mbed.h"
 #include <stdio.h>
@@ -360,3 +360,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // COMPONENT_FLASHIAP

features/storage/TESTS/kvstore/filesystemstore_tests/main.cpp

@@ -29,7 +29,7 @@
 
 #if !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)
 #error [NOT_SUPPORTED] Kvstore API tests run only on K64F devices and Fastmodels
-#endif
+#else
 
 #define FSST_TEST_NUM_OF_THREADS 5
 
@@ -521,3 +521,4 @@ int main()
     return !Harness::run(specification);
 }
 
+#endif // !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)

features/storage/TESTS/kvstore/general_tests_phase_1/main.cpp

@@ -31,7 +31,7 @@ using namespace mbed;
 
 #if !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)
 #error [NOT_SUPPORTED] Kvstore API tests run only on K64F devices and Fastmodels
-#endif
+#else
 
 static const char   data[] = "data";
 static const char   key[] = "key";
@@ -855,3 +855,5 @@ int main()
 
     return !Harness::run(specification);
 }
+
+#endif // !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)

features/storage/TESTS/kvstore/general_tests_phase_2/main.cpp

@@ -31,7 +31,7 @@ using namespace mbed;
 
 #if !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)
 #error [NOT_SUPPORTED] Kvstore API tests run only on K64F devices and Fastmodels
-#endif
+#else
 
 static const char   data[] = "data";
 static const char   key[] = "key";
@@ -858,3 +858,5 @@ int main()
 
     return !Harness::run(specification);
 }
+
+#endif // !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)

features/storage/TESTS/kvstore/securestore_whitebox/main.cpp

@@ -34,13 +34,9 @@
 #include <stdio.h>
 #include <algorithm>
 
-#if !defined(TARGET_K64F) && !defined(TARGET_ARM_FM)
+#if (!defined(TARGET_K64F) && !defined(TARGET_ARM_FM)) || !SECURESTORE_ENABLED
-#error [NOT_SUPPORTED] Kvstore API tests run only on K64F devices and Fastmodels
+#error [NOT_SUPPORTED] Kvstore API tests run only on K64F devices and Fastmodels. KVStore & SecureStore need to be enabled for this test
-#endif
+#else
-
-#if !SECURESTORE_ENABLED
-#error [NOT_SUPPORTED] KVStore & SecureStore need to be enabled for this test
-#endif
 
 using namespace mbed;
 
@@ -534,3 +530,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // (!defined(TARGET_K64F) && !defined(TARGET_ARM_FM)) || !SECURESTORE_ENABLED

features/storage/filesystem/littlefs/TESTS/filesystem/dirs/main.cpp

@@ -32,7 +32,7 @@ using namespace utest::v1;
 
 #ifndef MBED_TEST_BLOCKDEVICE
 #error [NOT_SUPPORTED] Non-volatile block device required
-#endif
+#else
 
 #ifndef MBED_TEST_BLOCKDEVICE_DECL
 #define MBED_TEST_BLOCKDEVICE_DECL MBED_TEST_BLOCKDEVICE bd
@@ -681,3 +681,5 @@ int main()
 {
     return !Harness::run(specification);
 }
+
+#endif // MBED_TEST_BLOCKDEVICE