Refactored few peripheral tests like DigitalInOut, InteruptIn

Checked refactoring progress on LPC11U24

libraries/tests/mbed/digitalin_digitalout/main.cpp

@@ -41,20 +41,24 @@ DigitalIn in(p25);
 
 #endif
 
-int main()
-{
+int main() {
+    TEST_TIMEOUT(10);
+    TEST_HOSTTEST(default_auto);
+    TEST_DESCRIPTION(DigitalIn DigitalOut);
+    TEST_START("MBED_A5");
+
     out = 0;
     wait(0.1);
     if (in != 0) {
         printf("ERROR: in != 0\n");
-        notify_completion(false);
+        TEST_RESULT(false);
     }
     out = 1;
     wait(0.1);
     if (in != 1) {
         printf("ERROR: in != 1\n");
-        notify_completion(false);
+        TEST_RESULT(false);
     }
 
-    notify_completion(true);
+    TEST_RESULT(true);
 }

libraries/tests/mbed/digitalinout/main.cpp

@@ -44,6 +44,11 @@ DigitalInOut d2(p25);
 
 int main()
 {
+    TEST_TIMEOUT(10);
+    TEST_HOSTTEST(default_auto);
+    TEST_DESCRIPTION(DigitalInOut);
+    TEST_START("MBED_A6");
+
     bool check = true;
 
     d1.output();
@@ -76,5 +81,5 @@ int main()
         check = false;
     }
 
-    notify_completion(check);
+    TEST_RESULT(check);
 }

libraries/tests/mbed/i2c_TMP102/main.cpp

@@ -32,13 +32,17 @@ TMP102 temperature(I2C_SDA, I2C_SCL, 0x90);
 TMP102 temperature(p28, p27, 0x90);
 #endif
 
-int main()
-{
+int main() {
+    TEST_TIMEOUT(10);
+    TEST_HOSTTEST(default_auto);
+    TEST_DESCRIPTION(DigitalIn DigitalOut);
+    TEST_START("MBED_A4");
+
     float t = temperature.read();
 
     printf("TMP102: Temperature: %f\n\r", t);
     // In our test environment (ARM office) we should get a temperature within
     // the range ]15, 30[C
     bool result = (t > 15.0) && (t < 30.0);
-    notify_completion(result);
+    TEST_RESULT(result);
 }

libraries/tests/mbed/interruptin/main.cpp

@@ -87,6 +87,11 @@ void flipper() {
 }
 
 int main() {
+    TEST_TIMEOUT(20);
+    TEST_HOSTTEST(default_auto);
+    TEST_DESCRIPTION(InterruptIn);
+    TEST_START("MBED_A7");
+
     IN_OUT_CLEAR;
     //Test falling edges first
     in.rise(NULL);
@@ -95,7 +100,7 @@ int main() {
 
     if(checks != 5) {
         printf("MBED: falling edges test failed: %d\r\n",checks);
-        notify_completion(false);
+        TEST_RESULT(false);
     }
 
     //Now test rising edges
@@ -105,7 +110,7 @@ int main() {
 
     if (checks != 10) {
         printf("MBED: raising edges test failed: %d\r\n", checks);
-        notify_completion(false);
+        TEST_RESULT(false);
     }
 
     //Now test switch off edge detection
@@ -115,7 +120,7 @@ int main() {
 
     if (checks != 10) {
         printf("MBED: edge detection switch off test failed: %d\r\n", checks);
-        notify_completion(false);
+        TEST_RESULT(false);
     }
 
     //Finally test both
@@ -125,9 +130,8 @@ int main() {
 
     if (checks != 20) {
         printf("MBED: Simultaneous rising and falling edges failed: %d\r\n", checks);
-        notify_completion(false);
+        TEST_RESULT(false);
     }
 
-    notify_completion(true);
-    return 0;
+    TEST_RESULT(true);
 }

libraries/tests/mbed/portinout/main.cpp

@@ -91,6 +91,11 @@ PortInOut port1(PORT_1, MASK_1);
 PortInOut port2(PORT_2, MASK_2);
 
 int main() {
+    TEST_TIMEOUT(20);
+    TEST_HOSTTEST(default_auto);
+    TEST_DESCRIPTION(PortInOut);
+    TEST_START("MBED_A11");
+
     bool check = true;
 
     port1.output();
@@ -111,5 +116,5 @@ int main() {
     port2 = 0; wait(0.1);
     if (port1 != 0) check = false;
 
-    notify_completion(check);
+    TEST_RESULT(check);
 }

libraries/tests/mbed/portout_portin/main.cpp

@@ -91,6 +91,11 @@ PortOut port_out(PORT_1, MASK_1);
 PortIn  port_in (PORT_2, MASK_2);
 
 int main() {
+    TEST_TIMEOUT(20);
+    TEST_HOSTTEST(default_auto);
+    TEST_DESCRIPTION(PortOut PortIn);
+    TEST_START("MBED_A10");
+
     port_out = MASK_1;
     wait(0.1);
     int value = port_in.read();