diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis.h new file mode 100644 index 0000000000..ee3ba9007b --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis.h @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f7xx.h" +#include "cmsis_nvic.h" + +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.c new file mode 100644 index 0000000000..69a0fa5832 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.c @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "cmsis_nvic.h" + +#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM +#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { + uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t i; + + // Copy and switch to dynamic vectors if the first time called + if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) { + uint32_t *old_vectors = vectors; + vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS; + for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS; + } + vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + +uint32_t NVIC_GetVector(IRQn_Type IRQn) { + uint32_t *vectors = (uint32_t*)SCB->VTOR; + return vectors[IRQn + NVIC_USER_IRQ_OFFSET]; +} diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h new file mode 100644 index 0000000000..0a26d73682 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h @@ -0,0 +1,54 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_NVIC_H +#define MBED_CMSIS_NVIC_H + +// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F +// MCU Peripherals: 98 vectors = 392 bytes from 0x40 to 0x1C7 +// Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM +#define NVIC_NUM_VECTORS 114 +#define NVIC_USER_IRQ_OFFSET 16 + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector); +uint32_t NVIC_GetVector(IRQn_Type IRQn); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c new file mode 100644 index 0000000000..e21ca156ae --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c @@ -0,0 +1,140 @@ +/** + ****************************************************************************** + * @file hal_tick.c + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#include "hal_tick.h" + +// 0=NO, 1=PG6 toggles at each tick +#define DEBUG_TICK 0 + +TIM_HandleTypeDef TimMasterHandle; +uint32_t PreviousVal = 0; + +void HAL_IncTick(void); +void us_ticker_irq_handler(void); + +void timer_irq_handler(void) { + // Channel 1 for mbed timeout + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1); + us_ticker_irq_handler(); + } + + // Channel 2 for HAL tick + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2); + uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle); + if ((val - PreviousVal) >= HAL_TICK_DELAY) { + // Increment HAL variable + HAL_IncTick(); + // Prepare next interrupt + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY); + PreviousVal = val; +#if DEBUG_TICK > 0 + HAL_GPIO_TogglePin(GPIOG, GPIO_PIN_6); +#endif + } + } +} + +// Reconfigure the HAL tick using a standard timer instead of systick. +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + uint32_t PclkFreq; + + // Get clock configuration + // Note: PclkFreq contains here the Latency (not used after) + HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq); + + // Get TIM5 clock value + PclkFreq = HAL_RCC_GetPCLK1Freq(); + + // Enable timer clock + TIM_MST_RCC; + + // Reset timer + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; + + // Configure time base + TimMasterHandle.Instance = TIM_MST; + TimMasterHandle.Init.Period = 0xFFFFFFFF; + + // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx + if (RCC_ClkInitStruct.APB1CLKDivider == RCC_HCLK_DIV1) + TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick + else + TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick + + TimMasterHandle.Init.ClockDivision = 0; + TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimMasterHandle.Init.RepetitionCounter = 0; + HAL_TIM_OC_Init(&TimMasterHandle); + + NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler); + NVIC_EnableIRQ(TIM_MST_IRQ); + + // Channel 1 for mbed timeout + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1); + + // Channel 2 for HAL tick + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2); + PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle); + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY); + __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); + +#if DEBUG_TICK > 0 + __GPIOG_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); +#endif + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.h new file mode 100644 index 0000000000..6501819b5d --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.h @@ -0,0 +1,62 @@ +/** + ****************************************************************************** + * @file hal_tick.h + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#ifndef __HAL_TICK_H +#define __HAL_TICK_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stm32f7xx.h" +#include "cmsis_nvic.h" + +#define TIM_MST TIM5 +#define TIM_MST_IRQ TIM5_IRQn +#define TIM_MST_RCC __TIM5_CLK_ENABLE() + +#define TIM_MST_RESET_ON __TIM5_FORCE_RESET() +#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET() + +#define HAL_TICK_DELAY (1000) // 1 ms + +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +#ifdef __cplusplus +} +#endif + +#endif // __HAL_TICK_H + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f746xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f746xx.h new file mode 100644 index 0000000000..a510fb023c --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f746xx.h @@ -0,0 +1,9445 @@ +/** + ****************************************************************************** + * @file stm32f746xx.h + * @author MCD Application Team + * @version V1.0.1 + * @date 25-June-2015 + * @brief CMSIS STM32F746xx Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32f746xx + * @{ + */ + +#ifndef __STM32F746xx_H +#define __STM32F746xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief STM32F7xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M7 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M7 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M7 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M7 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M7 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M7 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */ + LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ + CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */ + I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */ + I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */ + SPDIF_RX_IRQn = 97 /*!< SPDIF-RX global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +/** + * @brief Configuration of the Cortex-M7 Processor and Core Peripherals + */ +#define __CM7_REV 0x0000 /*!< Cortex-M7 revision r0p1 */ +#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ +#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */ +#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */ +#include "core_cm7.h" /*!< Cortex-M7 processor and core peripherals */ + + +#include "system_stm32f7xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual + AND triple modes, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief HDMI-CEC + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + __IO uint32_t RESERVED8; + __IO uint32_t PTPTSSR; + uint32_t RESERVED9[565]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + __IO uint32_t DMARSWTR; + uint32_t RESERVED10[8]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ + __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ + __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */ +} FLASH_TypeDef; + + + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */ +} PWR_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, 0x3C */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, 0x5C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ + uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ + __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ + __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ + __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */ + __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */ + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */ + +} TIM_TypeDef; + +/** + * @brief LPTIMIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @} + */ + +/** + * @brief USB_OTG_Core_Registers + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ + __IO uint32_t CID; /*!< User ID Register 03Ch */ + uint32_t Reserved5[3]; /*!< Reserved 040h-048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ + uint32_t Reserved6; /*!< Reserved 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */ + uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ + __IO uint32_t DCTL; /*!< dev Control Register 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ + uint32_t Reserved0C; /*!< Reserved 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ + uint32_t Reserved20; /*!< Reserved 820h */ + uint32_t Reserved9; /*!< Reserved 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ +} USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ + uint32_t Reserved40C; /*!< Reserved 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ + uint32_t Reserved[2]; /*!< Reserved */ +} USB_OTG_HostChannelTypeDef; +/** + * @} + */ + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define RAMITCM_BASE ((uint32_t)0x00000000) /*!< Base address of :16KB RAM reserved for CPU execution/instruction accessible over ITCM */ +#define FLASHITCM_BASE ((uint32_t)0x00200000) /*!< Base address of :(up to 1 MB) embedded FLASH memory accessible over ITCM */ +#define FLASHAXI_BASE ((uint32_t)0x08000000) /*!< Base address of : (up to 1 MB) embedded FLASH memory accessible over AXI */ +#define RAMDTCM_BASE ((uint32_t)0x20000000) /*!< Base address of : 64KB system data RAM accessible over DTCM */ +#define SRAM1_BASE ((uint32_t)0x20010000) /*!< Base address of : 240KB RAM1 accessible over AXI/AHB */ +#define SRAM2_BASE ((uint32_t)0x2004C000) /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Base address of : AHB/ABP Peripherals */ +#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Base address of : Backup SRAM(4 KB) */ +#define QSPI_BASE ((uint32_t)0x90000000) /*!< Base address of : QSPI memories accessible over AXI */ +#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< Base address of : FMC Control registers */ +#define QSPI_R_BASE ((uint32_t)0xA0001000) /*!< Base address of : QSPI Control registers */ +#define FLASH_END ((uint32_t)0x080FFFFF) /*!< FLASH end address */ + +/* Legacy define */ +#define FLASH_BASE FLASHAXI_BASE + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#define I2C4_BASE (APB1PERIPH_BASE + 0x6000) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) +#define ADC_BASE (APB2PERIPH_BASE + 0x2300) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400) +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800) +#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM10_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM11_BASE (APB2PERIPH_BASE + 0x4800) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000) +#define SPI6_BASE (APB2PERIPH_BASE + 0x5400) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024) +#define LTDC_BASE (APB2PERIPH_BASE + 0x6800) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104) +/*!< AHB1 peripherals */ +#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000) +#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400) +#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800) +#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00) +#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800) +#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000) +#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400) +#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000) +#define RCC_BASE (AHB1PERIPH_BASE + 0x3800) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00) +#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000) +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400) +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000) +/*!< AHB2 peripherals */ +#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800) +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE ((uint32_t )0xE0042000) + +/*!< USB registers base address */ +#define USB_OTG_HS_PERIPH_BASE ((uint32_t )0x40040000) +#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000) + +#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000) +#define USB_OTG_DEVICE_BASE ((uint32_t )0x800) +#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900) +#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00) +#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20) +#define USB_OTG_HOST_BASE ((uint32_t )0x400) +#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440) +#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500) +#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20) +#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00) +#define USB_OTG_FIFO_BASE ((uint32_t )0x1000) +#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000) + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint32_t)0x00000001) /*!
© COPYRIGHT(c) 2015 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f7xx + * @{ + */ + +#ifndef __STM32F7xx_H +#define __STM32F7xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F7) +#define STM32F7 +#endif /* STM32F7 */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ +#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) + /* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG, + STM32F756NG Devices */ +#define STM32F746xx /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG, + STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */ + /* #define STM32F745xx */ /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ +#define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V1.0.1 + */ +#define __STM32F7xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */ +#define __STM32F7xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F7xx_CMSIS_DEVICE_VERSION ((__STM32F7xx_CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\ + |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\ + |(__STM32F7xx_CMSIS_DEVICE_VERSION)) +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ +#if defined(STM32F756xx) + #include "stm32f756xx.h" +#elif defined(STM32F746xx) + #include "stm32f746xx.h" +#elif defined(STM32F745xx) + #include "stm32f745xx.h" +#else + #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + +/** @addtogroup Exported_macro + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + +/** + * @} + */ + +#ifdef USE_HAL_DRIVER + #include "stm32f7xx_hal_conf.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F7xx_H */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h new file mode 100644 index 0000000000..8c67585b9b --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h @@ -0,0 +1,421 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf_template.h + * @author MCD Application Team + * @version V1.0.1 + * @date 25-June-2015 + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DCMI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_DMA2D_MODULE_ENABLED +#define HAL_ETH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +#define HAL_HASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_QSPI_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SPDIFRX_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define ART_ACCLERATOR_ENABLE 1 /* To enable instruction cache and prefetch */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 0 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.c new file mode 100644 index 0000000000..9c3676eb68 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.c @@ -0,0 +1,709 @@ +/** + ****************************************************************************** + * @file system_stm32f7xx.c + * @author MCD Application Team + * @version V1.0.1 + * @date 25-June-2015 + * @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * This file configures the system clock as follows: + *----------------------------------------------------------------------------- + * System clock source | [1] PLL_HSE_XTAL | [2] PLL_HSI if [1] fails + * | (external 25MHz xtal) | (internal 16MHz clock) + *----------------------------------------------------------------------------- + * SYSCLK(MHz) | 216 | 216 + *----------------------------------------------------------------------------- + * AHBCLK (MHz) | 216 | 216 + *----------------------------------------------------------------------------- + * APB1CLK (MHz) | 54 | 54 + *----------------------------------------------------------------------------- + * APB2CLK (MHz) | 108 | 108 + *----------------------------------------------------------------------------- + * USB capable | YES | NO + * with 48 MHz precise clock | | + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f7xx_system + * @{ + */ + +/** @addtogroup STM32F7xx_System_Private_Includes + * @{ + */ + +#include "stm32f7xx.h" +#include "hal_tick.h" + +HAL_StatusTypeDef HAL_Init(void); + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted + on EVAL board as data memory */ +/* #define DATA_IN_ExtSRAM */ +/* #define DATA_IN_ExtSDRAM */ + +#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM) + #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM " +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Macros + * @{ + */ + +/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */ +#define USE_PLL_HSE_EXTC (0) /* Use external clock --> NOT USED ON THIS BOARD */ +#define USE_PLL_HSE_XTAL (1) /* Use external xtal */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Variables + * @{ + */ + + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = HSI_VALUE; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes + * @{ + */ +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif + +uint8_t SetSysClock_PLL_HSI(void); + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemFrequency variable. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + + /* Configure the Cube driver */ + SystemCoreClock = HSI_VALUE; // At this stage the HSI is used as system clock + HAL_Init(); + + // Enable CPU L1-Cache + SCB_EnableICache(); + SCB_EnableDCache(); + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings */ + SetSysClock(); + + /* Reset the timer to avoid issues after the RAM initialization */ + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f7xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f7xx.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f7xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0; +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + + /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x50150005; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x55554005; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCCC000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x55400555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CC00CC; + GPIOG->AFR[1] = 0xC000000C; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x80020A0A; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0x80020A0A; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x40010505; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x55550450; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00145555; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable SDRAM bank1 */ + FMC_Bank5_6->SDCR[0] = 0x000019E5; + FMC_Bank5_6->SDTR[0] = 0x01116361; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x000000F3; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ + +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x55550545; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x55554145; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x55000555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00200AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00100555; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[4] = 0x00001091; + FMC_Bank1->BTCR[5] = 0x00110212; + FMC_Bank1E->BWTR[4] = 0x0FFFFFFF; + +#endif /* DATA_IN_ExtSRAM */ + + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +void SetSysClock(void) +{ + /* 1- Try to start with HSE and external clock */ +#if USE_PLL_HSE_EXTC != 0 + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { + /* 2- If fail try to start with HSE and external xtal */ + #if USE_PLL_HSE_XTAL != 0 + if (SetSysClock_PLL_HSE(0) == 0) + #endif + { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) + { + while(1) + { + // [TODO] Put something here to tell the user that a problem occured... + } + } + } + } + + // Output clock on MCO2 pin(PC9) for debugging purpose + // Can be visualized on uSD card CN3 connector pin 8 + //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 216 MHz / 4 = 54 MHz +} + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + // Enable power clock + __PWR_CLK_ENABLE(); + + // Enable HSE oscillator and activate PLL with HSE as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == 0) + { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External xtal on OSC_IN/OSC_OUT */ + } + else + { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External clock on OSC_IN */ + } + // Warning: this configuration is for a 25 MHz xtal clock only + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 25; // VCO input clock = 1 MHz (25 MHz / 25) + RCC_OscInitStruct.PLL.PLLN = 432; // VCO output clock = 432 MHz (1 MHz * 432) + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2) + RCC_OscInitStruct.PLL.PLLQ = 9; // USB clock = 48 MHz (432 MHz / 9) --> OK for USB + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Activate the OverDrive to reach the 216 MHz Frequency + if (HAL_PWREx_EnableOverDrive() != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 216 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; // 54 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 108 MHz + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) + { + return 0; // FAIL + } + + return 1; // OK +} +#endif + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + // Enable CPU L1-Cache + SCB_EnableICache(); + SCB_EnableDCache(); + + // Enable power clock + __PWR_CLK_ENABLE(); + + // Enable HSI oscillator and activate PLL with HSI as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSICalibrationValue = 16; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16) + RCC_OscInitStruct.PLL.PLLN = 432; // VCO output clock = 432 MHz (1 MHz * 432) + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2) + RCC_OscInitStruct.PLL.PLLQ = 9; // USB clock = 48 MHz (432 MHz / 9) --> OK for USB + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + // Activate the OverDrive to reach the 216 MHz Frequency + if (HAL_PWREx_EnableOverDrive() != HAL_OK) + { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 216 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; // 54 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 108 MHz + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) + { + return 0; // FAIL + } + + return 1; // OK +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.h new file mode 100644 index 0000000000..529cb4a24d --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.h @@ -0,0 +1,123 @@ +/** + ****************************************************************************** + * @file system_stm32f7xx.h + * @author MCD Application Team + * @version V1.0.1 + * @date 25-June-2015 + * @brief CMSIS Cortex-M7 Device System Source File for STM32F7xx devices. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f7xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F7XX_H +#define __SYSTEM_STM32F7XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F7xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F7xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F7xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +extern void SetSysClock(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F7XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/