mirror of https://github.com/ARMmbed/mbed-os.git
PortentaH7: add Ethernet support
Martino Facchin
parent
8d9b6e9088
commit
7e2acee49a
|
|
@ -0,0 +1,171 @@
|
|||
/* mbed Microcontroller Library
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#define ETHERNET 1
|
||||
|
||||
#ifndef USE_USER_DEFINED_HAL_ETH_MSPINIT
|
||||
|
||||
#include "stm32h7xx_hal.h"
|
||||
|
||||
#define ETH_TX_EN_Pin GPIO_PIN_11
|
||||
#define ETH_TX_EN_GPIO_Port GPIOG
|
||||
#define ETH_TXD1_Pin GPIO_PIN_12
|
||||
#define ETH_TXD1_GPIO_Port GPIOG
|
||||
#define ETH_TXD0_Pin GPIO_PIN_13
|
||||
#define ETH_TXD0_GPIO_Port GPIOG
|
||||
#define ETH_MDC_SAI4_D1_Pin GPIO_PIN_1
|
||||
#define ETH_MDC_SAI4_D1_GPIO_Port GPIOC
|
||||
#define ETH_MDIO_Pin GPIO_PIN_2
|
||||
#define ETH_MDIO_GPIO_Port GPIOA
|
||||
#define ETH_REF_CLK_Pin GPIO_PIN_1
|
||||
#define ETH_REF_CLK_GPIO_Port GPIOA
|
||||
#define ETH_CRS_DV_Pin GPIO_PIN_7
|
||||
#define ETH_CRS_DV_GPIO_Port GPIOA
|
||||
#define ETH_RXD0_Pin GPIO_PIN_4
|
||||
#define ETH_RXD0_GPIO_Port GPIOC
|
||||
#define ETH_RXD1_Pin GPIO_PIN_5
|
||||
#define ETH_RXD1_GPIO_Port GPIOC
|
||||
|
||||
/**
|
||||
* Override HAL Eth Init function
|
||||
*/
|
||||
void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(heth->Instance == ETH)
|
||||
{
|
||||
#if !(defined(DUAL_CORE) && defined(CORE_CM4))
|
||||
/* Disable DCache for STM32H7 family */
|
||||
SCB_DisableDCache();
|
||||
#endif
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
// __HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
// __HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
|
||||
/* Enable Peripheral clock */
|
||||
__HAL_RCC_ETH1MAC_CLK_ENABLE();
|
||||
__HAL_RCC_ETH1TX_CLK_ENABLE();
|
||||
__HAL_RCC_ETH1RX_CLK_ENABLE();
|
||||
|
||||
/* Set pinstrap for 100mbit */
|
||||
// TODO
|
||||
|
||||
/* Reset ETH Phy */
|
||||
__HAL_RCC_GPIOJ_CLK_ENABLE();
|
||||
GPIO_InitTypeDef gpio_eth_rst_init_structure;
|
||||
gpio_eth_rst_init_structure.Pin = GPIO_PIN_15;
|
||||
gpio_eth_rst_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
gpio_eth_rst_init_structure.Pull = GPIO_NOPULL;
|
||||
gpio_eth_rst_init_structure.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOJ, &gpio_eth_rst_init_structure);
|
||||
|
||||
gpio_eth_rst_init_structure.Pin = ETH_RXD0_Pin | ETH_RXD1_Pin;
|
||||
HAL_GPIO_Init(GPIOC, &gpio_eth_rst_init_structure);
|
||||
HAL_GPIO_WritePin(GPIOC, ETH_RXD0_Pin, 1);
|
||||
HAL_GPIO_WritePin(GPIOC, ETH_RXD1_Pin, 1);
|
||||
gpio_eth_rst_init_structure.Pin = ETH_CRS_DV_Pin;
|
||||
HAL_GPIO_Init(GPIOA, &gpio_eth_rst_init_structure);
|
||||
HAL_GPIO_WritePin(GPIOA, ETH_CRS_DV_Pin, 1);
|
||||
|
||||
HAL_Delay(25);
|
||||
HAL_GPIO_WritePin(GPIOJ, GPIO_PIN_15, 0);
|
||||
HAL_Delay(100);
|
||||
HAL_GPIO_WritePin(GPIOJ, GPIO_PIN_15, 1);
|
||||
|
||||
/**ETH GPIO Configuration
|
||||
PG11 ------> ETH_TX_EN
|
||||
PG12 ------> ETH_TXD1
|
||||
PG13 ------> ETH_TXD0
|
||||
PC1 ------> ETH_MDC
|
||||
PA2 ------> ETH_MDIO
|
||||
PA1 ------> ETH_REF_CLK
|
||||
PA7 ------> ETH_CRS_DV
|
||||
PC4 ------> ETH_RXD0
|
||||
PC5 ------> ETH_RXD1
|
||||
*/
|
||||
GPIO_InitStruct.Pin = ETH_TX_EN_Pin|ETH_TXD1_Pin|ETH_TXD0_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = ETH_MDC_SAI4_D1_Pin|ETH_RXD0_Pin|ETH_RXD1_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = ETH_MDIO_Pin|ETH_REF_CLK_Pin|ETH_CRS_DV_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Override HAL Eth DeInit function
|
||||
*/
|
||||
void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
|
||||
{
|
||||
if(heth->Instance == ETH)
|
||||
{
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ETH1MAC_CLK_DISABLE();
|
||||
__HAL_RCC_ETH1TX_CLK_DISABLE();
|
||||
__HAL_RCC_ETH1RX_CLK_DISABLE();
|
||||
|
||||
/**ETH GPIO Configuration
|
||||
PG11 ------> ETH_TX_EN
|
||||
PG12 ------> ETH_TXD1
|
||||
PG13 ------> ETH_TXD0
|
||||
PC1 ------> ETH_MDC
|
||||
PA2 ------> ETH_MDIO
|
||||
PA1 ------> ETH_REF_CLK
|
||||
PA7 ------> ETH_CRS_DV
|
||||
PC4 ------> ETH_RXD0
|
||||
PC5 ------> ETH_RXD1
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOG, ETH_TX_EN_Pin|ETH_TXD1_Pin|ETH_TXD0_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOC, ETH_MDC_SAI4_D1_Pin|ETH_RXD0_Pin|ETH_RXD1_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, ETH_MDIO_Pin|ETH_REF_CLK_Pin|ETH_CRS_DV_Pin);
|
||||
|
||||
HAL_GPIO_WritePin(GPIOJ, GPIO_PIN_15, 0);
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* USE_USER_DEFINED_HAL_ETH_MSPINIT */
|
||||
|
|
@ -3024,13 +3024,15 @@
|
|||
],
|
||||
"device_has_add": [
|
||||
"USBDEVICE",
|
||||
"EMAC",
|
||||
"QSPI"
|
||||
],
|
||||
"overrides": {
|
||||
"system_power_supply": "PWR_SMPS_1V8_SUPPLIES_LDO",
|
||||
"clock_source": "USE_PLL_HSE_EXTC",
|
||||
"lse_available": 1,
|
||||
"lpticker_delay_ticks": 0
|
||||
"lpticker_delay_ticks": 0,
|
||||
"network-default-interface-type": "ETHERNET"
|
||||
},
|
||||
"device_name": "STM32H747XIHx"
|
||||
},
|
||||
|
|
|
|||
Loading…
Reference in New Issue